Job Listing Description

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Assembler B

Description:

JOB TITLE: Systems Assembler B

LOCATION: North Charleston, SC

Very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.

This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Systems Assembly
South Carolina
KEYWORDS: Years of SYSTEMS assembly experience must be noted on resume, Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decorative repair, waste and potable water systems.
Job Description:
Performs routine production assembly operations on structural and mechanical assemblies, sub-assemblies and aircraft systems, equipment and accessories using manual operations. Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decorative repair, waste and potable water systems. Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with company procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead. Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement. Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term Schedule: Contractor must be able to work variable shifts - 1st, 2nd 3rd. Overtime is scheduled based on business needs and may include weekend hours. Years of SYSTEMS assembly experience must be noted on resume. Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

    Performs routine production assembly operations on structural and mechanical assemblies, sub-assemblies and aircraft systems, equipment and accessories using manual operations.
    Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decorative repair, waste and potable water systems.
    Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
    Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with company procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
    Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement. Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
    Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
    Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area.
    Possess understanding and knowledge of basic computer systems and programs.
    Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required.
    Frequent overtime may be required.
Key Requirements:
    Years of SYSTEMS assembly experience must be noted on resume Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decorative repair, waste and potable water systems.
Desired Skills:
    Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate). Suitable candidates will have ONE year of direct Aerospace Systems Experience as a minimum requirement 3 years of solid Aerospace Systems Experience. Winter graduates of aeronautical programs (PIA, Embry Riddle, etc) will be considered and selected candidates will be scheduled to start after graduation date. Resume should clearly indicate School Name, Program and Graduation Date.
Functional Excellence Competencies:
    Accountability and Responsibility: Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility. Adaptability: Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures. Change Management: Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace. Continuous Improvement: Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact. Continuous Learning: Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform. Innovation/Creativity: Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities. Planning and organizing: Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required. Strategic Decision Making: Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values. Teamwork: Demonstrates a commitment to the mission and motivation to combine the team's energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

Technical Competencies:
    Assembly Process: Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements. Certification & Qualification: Knowledge of verification, validation, certification and qualification processes and procedures, including knowledge of governing regulations and compliance requirements. Ability to assess and document test or analysis data to show compliance. Electrical Test: Knowledge of electrical test methodology (e.g., stand alone bench, automated, integration laboratory, simulation, functional test), planning, procedures, equipment (e.g., multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e.g., pass/fail, control limits, tolerances). Electronics & Electro-Mech:Knowledge of electronics and electro-mechanical assemblies and the ability to solve problems. Engineering Drawings & Specs: Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design). General Shop Processes: Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD). General/Precision Test & Meas: Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements. Hydraulic Power/Actuation System: Knowledge of hydraulic power systems equipment (e.g., pumps, accumulators, ram air turbines, distribution) and hydraulic actuation systems (e.g., servo actuators, control valves, actuators, motors, pressure and flow control devices) design, performance and integration. Lean Manufacturing: Knowledge of Lean Manufacturing principles (e.g., value stream analysis, single piece flow). Quality Systems Process: Knowledge of quality systems (e.g., inspection process, company quality procedures). Systems Thinking: Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance. Troubleshooting: The ability to use established physical, mechanical, or scientific principles and perform appropriate tests to identify and solve problems encountered on the job. This includes the ability to locate and isolate the problem, identify possible solutions, and select approaches that are practical and effective.

Expectations:

    Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
    Contact with sealants and solvents, exposure to noise, working on elevated platforms
    Use personal protective gear for face, eyes, ears, hand, and arms as required.
    Pass visual acuity and color perception tests
    Read, write, and comprehend the English language
    Handle, use, and dispose of hazardous material
    Obtain & maintain training certifications as required to support assignment responsibilities
    Occasional (1 to 3 hrs) finger manipulation
    On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
    Frequent reaching overhead (3 to 6 hrs)
    Frequent walking on flat surfaces
    Frequent standing flat or uneven surfaces
    Frequent balancing on a ladder, steps, or uneven surfaces
    Occasional climbing on 3-12 ft ladders or stands
    Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
    Occasional contact with metals
    Exposure to plastics and solvents to atmospheric conditions
    Frequent exposure to noise
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft, Years of SYSTEMS assembly experience must be noted on resume, Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decorative repair, waste and potable water systems.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4346-4323-11534
Job Location: North Charleston SC
Per Diem: --
Overtime: --
Start Date: 2023-06-12
Input Date: 06/21/2022
Last Updated: 07/13/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Joshua Garza
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Previous Listing       Next Listing
Back to Abbreviated Search Results
Back to Complete Search Results
Back to Advanced Job Search

Phone: (425) 806-5200
Fax: (425) 806-5585
Email: staff@cjhunter.com
ContractJobHunter is a service of:
ContractJobHunter.com LLC
P.O. Box 3006, Bothell, WA 98041-3006, USA
Disclaimer
The content of this website is Copyright 2024 ContractJobHunter.com LLC
Terms of Use of ContractJobHunter
Refund Policy
Privacy Policy