Job Search Results

449 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/06/12 Saturday 01:22PM Pacific Time by ContractJobHunter. )

Listings 1 - 449

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
44425-1 - Wire Design & Installation Engineer

Description:
Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Software Experience:

• WIRS
• CaddStation
• AdobePro
• CatiaV5
• Bogart
• ProgeCAD


The Structures Company LLC is an AA/EOE.
 
Job Number: 464
Job Location: Oklahoma City, OK
Rate: $55/Hr. *DOE*
Per Diem: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 05/26/2021
Last Updated: 05/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
44442-1 - Manufacturing Planner III - Electrical/Electronics -

Description:
General Job Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

PROJECT/SKILLS
• Create wire harness fabrication planning, bills of material, and first article inspection plans. Development of installation plans may follow once the harnesses are ready to be installed in the aircraft. Initially working on fabrication and installation for work construction offering.
• Experience with tech writing is a huge plus

Education/experience
Typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).

*Out-of-state candidates are acceptable due to nature of job*
*Schedule: operates on 4/10 schedule, 5AM-3:30PM*
*U.S. citizenship required*


The Structures Company LLC is an AA/EOE.
 
Job Number: 468
Job Location: Mesa, AZ
Rate: Up to $50/Hr. **DOE**
Per Diem: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 04/15/2021
Last Updated: 05/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
61035 - Reliability & Maintainability Engineer

Description:
Reliability & Maintainability Engineer

Location: Fort Worth, TX (76118)

Job ID: #61035

12 month contract 

Position Responsibilities:
• Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
• Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Assess manufacturing parametrics and maintenance removal times.
• Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
• Perform budget estimating and management tasks.
Qualifications

Education Requirements:
• Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.
Position Requirements:
• Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
• Proficiency in Microsoft Office
• Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
• Candidates must be eligible to obtain Secret Security Clearance
Preferred Skills:
• Prior military experience maintaining rotory or tiltrotor aircraft.
• Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
• Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
• Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
• Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
• Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
• Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
• Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
• Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
• Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61035
Job Location: Fort Worth, TX
Duration: 12 month
Input Date: 04/30/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ACAS / TCAS System Development Engineer

Description:
ABOUT THE JOB:
This position is responsible for system development activities for an Aircraft Collision Avoidance System (ACAS) in accordance with ARP4754A systems development cycle.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Knowledge of ARP4754A systems development cycle
• Familiarity with DO-178B
• Experience with requirements development, capture and management
• Experience with DOORS for requirements capture and management
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

HIGHLY PREFERRED SKILLS:
• Familiarity with Aircraft Collision Avoidance Systems (Detect and Avoid)
• Familiarity with DO-386, Minimum Operational Performance Standards for unmanned aircraft

PREFERRED SKILLS:
• TCAS product experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 04/30/2021
Last Updated: 05/10/2021
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

ADAS Vehicle Operator / Data Technician

Description:
PDS Tech Inc., is seeking a Data Technician in Auburn Hills, MI

Overview:
The Test and Validation Department of the ADAS Business Unit NAFTA conducts system level testing of radar and camera sensors in support of product development for North American OEM projects. This includes meeting OEM Customer performance requirements which are verified through on-road vehicle level (L1) data collection and Bench level (L2) verification testing and comparing this performance against defined Customer requirements.

Responsibilities:
• Safely drive the Client's vehicles, routinely along a well-defined and documented route.
• Support the Vehicle Test Engineering team by capturing accurate vehicle data during specific vehicle maneuvers needed to support ADAS feature development.
• Verify system performance against requirements.
• Provide a written summary to include the vehicle driven, number miles driven, hours driven, and project number supported at a minimum for each test drive.
• Support the Vehicle Test Technician team with vehicle builds involving the installation of ADAS sensors and data acquisition systems.
• Build and install wire harnesses assemblies to support vehicle builds.
• Will report to and receive daily guidance and work packages from the ADAS Supervisors and their staff.

 
Requirements:
• Must have Tier II or Level 2 certification or equivalent license/certification to test drive the vehicles.
• 2+ years’ experience with vehicle level testing.
• Experience with data acquisition systems (computers) installed in the test vehicles and conducting specified maneuvers to test and record data to prove the performance of the system.
• Must have experience monitoring signals with the data acquisition system.
• Excellent organizational, verbal, and written communications skills, communicating in English clearly and effectively
• Computer proficiency with basic computer programs including the Microsoft office suite (Word, Excel, and PowerPoint).
• Valid driver’s license with clean driving record and motorcycle endorsement.
• Minimum 2+ years motorcycle driving experience preferred.
• Truck / Trailer towing experience - Ability to safely operate cars and Light/Heavy duty trucks .
• Able to drive a manual transmission.
• Must be able to demonstrate the necessary driving skills to become certified to drive on the Client's or Customer proving grounds
• Ability to read/understand electrical schematics
• Familiar with automotive hardware, such as switches, relays, power distribution, etc.
• Proficient with common hand tools, soldering equipment, and multimeters.
• Familiarity with new vehicle technology including Navigation systems, blind spot detection, active cruise control, lane departure warning, automated high beam assist, bluetooth, etc.
• Well motivated, self-starter, high integrity and team player.
• Able to work in a team environment, flexible, and able to multitask to meet project timing (time management skills)
• Must be able to lift 25 pounds.
• Two-year Associates degree in a technical (preferably automotive) related field.

Preferred Qualifications:
• Knowledge of automotive on board test instrumentation.
• Previous experience with ADAS components
• Understanding of vehicle CAN communication
 
Job Number: 2010122868
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 12/15/2020
Last Updated: 06/11/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Melissa Cuellar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PKMSQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Model Based Systems Engineer, Fort Worth, TX

Description:
Aerospace Model Based Systems Engineer, Fort Worth, TX
JR-022258

You Will:
• Conduct system-of-systems modeling, operations analysis, and requirements decomposition for development and production products.
• Define and trace vehicle design requirements, test data, and performance values associated with engineering and manufacturing development of the aircraft and its subsystems
• Coordinate and execute milestone project reviews, technical reviews, and decision tradeoff analysis.
• Develop requirement and requirements specifications for the air system and subsystems, support development of requirements and specifications for component and assemblies.
• Develop operational models using the DoD Architecture Framework
• Use Model Based Systems Engineering principles to develop SysML systems descriptions
• Manage program reviews to include Systems Requirements and System Functional Reviews, Preliminary Design and Critical Design Reviews.
• Collaborate with design engineers in the development of Statements of Work.
• Coordinate with design engineers, specialty engineering, flight technology and build team to ensure a coherent set of requirements is being developed. • Execute design reviews at the Tier I and Tier II level, ensuring all necessary deliverables are complete and to the required standard.
• Assist in the management of the program product lifecycle management tool for the program.
• Work with IPTs to develop verification plans for each subsystem.
• Perform RIO development and tracking with program management and support IPT RIO management.
•Track and capture design decision notices, impacts and design changes as they occur throughout the program.
Ability to apply systems engineering processes in support of system life cycle development

You Will Need:
• Demonstrated knowledge of Model Based Systems Engineering (MBSE) experience highly preferred
• Experience in SysML, MBSE and DoDAF modeling
• Proficiency with MagicDraw
• System-of-systems modeling experience
• Parametric modeling and simulation

Education: •Bachelor of Science in applicable Engineering Discipline (Systems, Aerospace, Electrical or Mechanical Engineering required)
• Master’s degree preferred.
Years of Experience: 5-7+ years engineering in the Aerospace industry
Citizenship: US person
 
Job Number: JR-022258
Job Location: Fort Worth, TX
Input Date: 05/03/2021
Firm Name: CYIENT
Attention: Elizabeth
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Software Avionics Integration and Test Engineer, Fort Worth, TX

Description:
Aerospace Software Avionics Integration and Test Engineer, Fort Worth, TX
JR-022744

Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.


You Will:

• Applies engineering principles to test and evaluate embedded software in avionics systems.
• Create and update requirements-based cases, procedures, and scripts.
• Working knowledge of requirements-based testing tools and methods.
• Working knowledge of software development lifecycle to include capability to break system and software requirements into associated tests.
• Prefer a knowledge of DOORS with ability to link requirements to test procedures.
• Working knowledge of multiple software development languages. Prefer a knowledge of C, C# and Python.
• Plans, supports, and manages integration projects to meet customer requirements.
• Works closely with other functional disciplines to ensure compliance to all critical performance parameters.

You’ll Need:
• Familiarity with military aerospace requirements development and verification processes.
• Experience with version control software such as Serena Dimensions (PVCS).
• Experience with MIL-STD-1553, ARINC-429, RS-232 and RS-422.
• Must have the ability to communicate efficiently and effectively to coordinate across multiple internal and external organizations.
• PC proficiency in Visio, MSWord, Excel, PowerPoint, and Outlook is required.

Education: Bachelor's Degree in Engineering is required. Major in Electrical Engineering and/or Computing Engineer is preferred.
• Other Engineering degrees considered with sufficient software development experience.

Years of Experience: 5-10+ years engineering in the Aerospace industry
Citizenship: US Citizen required

Skills & Experience
ARINC 429, MIL-STD-1553, RS-422

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

APPLICATION URL:

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Avionics-Integration-and-Test-Engineer_JR-022744-1
 
Job Number: JR-022744
Job Location: Fort Worth, TX
Input Date: 05/26/2021
Firm Name: CYIENT
Attention: Elizabet
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technician-Vertical Lift

Description:
Aircraft Assembly Technician-Vertical Lift

Job ID # 2021-12857

Contract Opportunity

Location: Mesa, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Follow computer based and other specific processes and systems, including manufacturing planning and blueprints, as well as other forms of both written and oral instructions.
Mechanical, electrical/avionics, sheet metal or composites work on Apache Longbow Helicopters.
Follow specific tool control, FOD (Foreign Object, Debris) control and safety guidelines and policies.

What You’ll Need:

Experience in assembly, disassembly, install, test and troubleshooting of mechanical and electrical assemblies and sub-assemblies on Apache Longbow helicopters.
Minimum of 1 year of experience with aircraft assembly processes.
Experience reading and interpreting assembly instructions or drawings.
Preferred Qualifications
Prefer specific Apache Longbow knowledge in systems such as Hydraulics, Flight Controls, Rigs, Fuel, Environmental Control Systems, Avionics, Wire Harness Installation nd routing, Fairings, Brakes.
A & P License preferred.

Education & Experience:

High School Diploma/GED

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
 
Job Number: Job ID # 2021-12857
Job Location: Mesa, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 04/20/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aircraft Electrician

Description:
Opportunity be part of the history by creating something that has never been done before: the first full electric, 9 pax business jet.

We are looking for an Aircraft Electrician to help with the installation of challenging Aircraft wiring. As an Aircraft Electrician you will be challenged with wiring, trouble shooting a new state of the art all electric Aircraft.



Responsibilities:



  • Ability to remove and install electrical LRUs and hardware equipment
  • Perform preroute and Permeant run of wires within the confines of the airplane
  • Depin and repin connectors
  • Read and understand wiring drawings
  • Build or repair electrical bundles
  • Read and understand wiring drawings
  • Install, test, troubleshoot, and repair wire harnesses and components in accordance with engineering specifications, maintenance, installation and quality directives
  • Diagnosing malfunctions
  • Soldering wires
  • Aircraft electrical maintainability.
  • Maintain all maintenance action recorded (data log).
  • Cleaning electrical components
  • Other duties may be assigned



    Requirements:



    • Catia or Enovia experience a plus
    • 5 plus year of experience in the aerospace world
    • Physical ability to work within confined spaces
    • Ability to thrive in a dynamic fast-paced company
    • Excellent interpersonal verbal and written communication skills.
    • Strong problem-solving skills, the ability to be resourceful, and the ability to exercise creative thinking
    • Ability to travel as needed
    • International work experience is a plus

     
    Job Number: 2110123306
    Job Location: Arlington, WA
    Duration: 6 months
    Input Date: 02/01/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ferreol Marande
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PN4LQAW&URLSource=cjhunter

    Aircraft Flight Test Operation Manual Specialist - China.

    Description:
    Aircraft Flight Test Operation Manual Specialist - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Flight Test Operation Manual creation.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • Doctoral level, with senior industry experience could be relaxed to Degree level with Flight control technology experience, aircraft overall design, aerodynamics and flight mechanics, aircraft power engineering, aircraft structure and strength design, flight control engineering, aircraft avionics and electrical, aviation engineering experience.
    • Familiar with unit operation procedure, more than 10 years experience in design or test verification of operation procedure. Pilot or flight test engineer qualification is preferred, civil wide body aircraft type working experience is preferred.
    • Have the knowledge of civil aircraft overall design, flight manual and system principle.
    • Familiar with the flight manual of each typical aircraft type, familiar with the design requirements and design verification methods of civil aircraft crew operation procedures.
    • Good computer use ability, communication ability, logical thinking ability, analytical ability and oral ability.
    • Good command of English listening, speaking, reading and writing.
    Role and Duties:
     
    • Engaged in the design and verification of the clients flight manual operation procedures.
    • Carry out research on the operation procedures of typical civil aircraft flight manual.
    • Carry out optimization and verification of aircraft operation program design.
    • Complete customized flight manual design for  aircraft.
    • Establish and improve the verification method and specification of flight manual operation procedure design.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.



     
    Job Number: BH-361
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/20/2021
    Input Date: 04/21/2021
    Last Updated: 06/12/2021
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Email: gbird@strongfield.com
    Website: www.strongfield.com

    Aircraft Flight Test Planning Specialist - China.

    Description:
    Aircraft Flight Test Planning Specialist - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Flight Test Planning.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • Working experience in aerospace companies. Doctoral degree is preferred; major in aircraft overall design, aerodynamics and flight mechanics, aircraft power engineering, aircraft structure and strength design, flight control engineering, aircraft avionics and electrical, aviation engineering.
    • More than 10 years and at least two types of flight test experience, including at least 3 years of civil aircraft flight test experience. Flight test engineer qualification is preferred, flight test experience of civil wide body aircraft is preferred.
    • Have civil aircraft overall design knowledge, flight test knowledge and system principles.
    • Be familiar with the purpose and method of civil aircraft flight test, understand the logical relationship of each subject, and have the ability to analyse flight test requirements and plan model flight test scheme.
    • Good computer use ability, communication ability, logical thinking ability, analytical ability and oral ability.
    • Good command of English listening, speaking, reading and writing.
      Role and Duties:
     
    • Engaged in Clients model flight test demand analysis, flight test planning research and design work.
    • Research on flight test planning and implementation experience of typical civil aircraft models.
    • Carry out flight test demand analysis of the Aircraft and other models.
    • Complete the flight test planning of the Aircraft and other models.
    • Establish and improve flight test requirement analysis method and flight test planning specification.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

     
    Job Number: BH-362
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/20/2021
    Input Date: 04/21/2021
    Last Updated: 06/12/2021
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Email: gbird@strongfield.com
    Website: www.strongfield.com

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in San Antonio, TX

    RESPONSIBILITIES: This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

    Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

    o Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

    o Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.

    o Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

    o Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.

    REQUIRED EXPERIENCE:
    o Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
    o Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
    o A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
    o The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
    o Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
    o Maintain necessary certifications, licenses and permits as required for assigned work.
    o The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
    o Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

    EDUCATION: High school or GED

    WORK HOURS: 6:00 AM - 2:30 PM

    MISCELLANEOUS: This position will require the ability to obtain customer approval for access. Dual citizenship or prior citizenship of any other country may preclude ability to obtain access. A 3rd party background check relating to personal and business finances, residences, employment history, past drug use, prior military service, and criminal behavior will be conducted prior to a start date.

     
    Job Number: 190993
    Job Location: San Antonio, TX
    Rate: $DOE
    Duration: 6 Months
    Input Date: 04/29/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Juan Saldarriaga
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jsaldarriaga@chiptonross.com
    Website: www.chiptonross.com

    Aircraft Standard Electronic Parts Design Specialist - China.

    Description:
    Aircraft Standard Electronic Parts Design Specialist -  China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Standard Electronic Parts Design and Engineering.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • With international well-known enterprises, institutions or universities working experience, with a Doctorate degree is preferred in  computer science and technology, control science and engineering, communication engineering, electronic information engineering, automation .
    • More than 10 years working experience in the following areas: Design, development, application and integration of avionics products for civil aviation.
    • Reliability design of avionics in civil aviation.
    • Management of electronic components of airborne equipment.
    • Design, simulation, verification and application of electronic components.
    • Proficient in electronic and electrical, signal processing, automatic control principle and other aspects of professional knowledge.
    • Solid foundation of electronic components, familiar with brand, principle, material, parameter and application of components, able to provide support for design and selection.
    • Have knowledge of electronic components reliability verification planning and failure analysis.
    • Good computer skills, communication skills, logical thinking ability, analytical ability and oral ability.
    • Good command of English listening, speaking, reading and writing.
    Role and Duties:

     
    • Engaged in the management procedure of electronic components of Chinese commercial aircraft borne system / equipment.
    • Construction and evaluation of product system and verification system.
    • Build electronic component management and control system of airborne system / equipment supplier and carry out corresponding evaluation.
    • Carry out the construction of the specification system framework for electronic components of airborne equipment.
    • Construct the reliability model and database of electronic components of airborne equipment .Application control and airworthiness compliance of electronic components of airborne equipment.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
     

     
    Job Number: BH-356
    Job Location: China, China
    Rate: Salary + Expenses , Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/20/2021
    Input Date: 04/21/2021
    Last Updated: 06/12/2021
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Email: gbird@strongfield.com
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structural Assembler-Vertical Lift

    Description:
    Aircraft Structural Assembler-Vertical Lift

    Job ID # 2021-12889

    Contract Opportunity

    Location: Mesa, AZ

    Industry: Aerospace & Defense

    Minimum Education: High School Diploma/GED

     

    What You’ll Do:

    Assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems. Identify non-conforming parts, conditions and manufacturing processes.
    Work with engineering to improve manufacturing processes.
    Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment.
    Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one Assembly to another as with fairings and the mating of major assemblies callouts, butt, station and water lines; blind pick up of hole locations for blank parts from existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
    Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
    Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues. Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gauges and scales.
    Report all non-conformances to manufacturing supervision or corrective action representative. Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
    Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Report on job status and restraints to coworkers and supervision;
    Identify production inefficiencies and suggests potential improvements to product or process.

    What You’ll Need:

    Knowledgeable and skilled in basic sheet metal, riveting, assembly methods and common shop practices.
    Knowledgeable and able to interpret and work from blueprints, sketches and written and verbal instructions.
    Knowledgeable and able to apply shop math.
    Knowledgeable and able to use computer systems for office and shop applications.
    Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    Able to complete and maintain all required training and certifications needed to do your job efficiently.
    Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.

    Education & Experience:

    High School Diploma/GED

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-12889
    Job Location: Mesa, AZ
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 7 Months
    Input Date: 04/21/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structural Assemblers

    Description:
    Indotronix is seeking Aircraft Structural Assemblers for long term job opportunities in Mesa, AZ

    Job Description:
    Assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems. Identify non-conforming parts, conditions and manufacturing processes. Work with engineering to improve manufacturing processes.

    Major Tasks and Responsibilities:
    Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment. Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one Assembly to another as with fairings and the mating of major assemblies callouts, butt, station and water lines; blind pick up of hole locations for blank parts from
    existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
    Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
    Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues. Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gauges and scales.
    Report all non-conformances to manufacturing supervision or corrective action representative. Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.

    Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Report on job status and restraints to coworkers and supervision;
    Identify production inefficiencies and suggests potential improvements to product or process.

    Qualifications: Knowledge, Skills, and Abilities Required
    •Knowledgeable and skilled in basic sheet metal, riveting, assembly methods and common shop practices.
    •Knowledgeable and able to interpret and work from blueprints, sketches and written and verbal instructions.
    •Knowledgeable and able to apply shop math.
    •Knowledgeable and able to use computer systems for office and shop applications.
    •Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    •Able to complete and maintain all required training and certifications needed to do your job efficiently.
    •Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.


    Shift Timings:
    Must be available to work either first or second shift. Standard shift: 8 hour days, 5 days a week, plus overtime when needed.
    Start time: 5AM
    End time: 3:30PM
     
    Job Number: 45016-1
    Job Location: Mesa, AZ
    Rate: Hourly
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term
    Start Date: ASAP
    Input Date: 04/30/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Gary
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    Aircraft Technician Sr

    Description:
    PDS is seeking an Aircraft Tech Sr  for an open position in Savannah, GA.

    Position Purpose:
    Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
    2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
    3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
    4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
    5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
    6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.
    7. Coordinate movement of aircraft as required.
    8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
    9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

    Additional Functions:
    1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
    2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
    3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
    4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
    5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    6. Perform other duties as assigned.
     

    Education and Experience Requirements: 



    • High school diploma/GED.
    • FAA Airframe and Powerplant Mechanic Certificate required.
    • Valid Drivers License required.
    • 4 years of aviation maintenance experience to include 3 years of experience working on mid/large-size aircraft required.
    • Corporate aircraft experience preferred.


    Unique Skills:



    Knowledge of cata v5, solumina, and SAP preferred but not required.




    Other Requirements:
    1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
    2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.)
    3. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.



     



     



     

     
    Job Number: 2110127928
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/05/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Earl Sawyer
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcyIQAS&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector

    Description:
    Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

    Education and Experience Requirements:
    High School graduate/GED. Airframe and Powerplant License required. Four (4) years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

    Position Purpose:
    The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

    Additional Functions: 1. Communicates with management as required to identify work assignments and delivery schedules. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval. 4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 5. Performs other duties as required.

    Other Requirements: 1. Strong written and verbal communication skills. Must be able to prioritize tasks. 2. Strong computer skills. 3. Must be able to work all shifts. 4. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
     
    Job Number: 14975
    Job Location: Savannah, GA
    Rate: $29.13 - $32.36/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/02/2021
    Last Updated: 05/06/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector Sr. (2nd Shift)

    Description:
    Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Must have A & P license and prior A/C inspection experience

    Education and Experience Requirements:
    High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

    Position Purpose:
    The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

    Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

    Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
     
    Job Number: 14996
    Job Location: Savannah, GA
    Rate: $32.63 - $36.25/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/10/2021
    Last Updated: 05/06/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Analog / Digital Design Engineer

    Description:
    • The Analog / Digital Design Engineer will have experience as a hybrid discipline with expertise on both the digital and analog side of design. This role plays a part on design teams and design architectures for low and high-power control electronics, motor control electronics and power management systems.
    • Moog Aircraft Analog / Digital Design Engineers require not only state of the art electronics design know-how but also experience designing for requirements such as: high shock and vibration, thermal management with extreme external temperature variation, high voltage, altitude variation, failure mode mitigation and arc threat management, minimized weight, robust packaging, long life and a low recurring cost.
    • Responsible for not only the technical solution but also meeting recurring and non-recurring cost targets.
    • This role will be interacting not only with the design engineering team, but other disciplines such as program management, system engineering, actuation engineering, safety and reliability, product engineering and others. Leadership skills are a must.

    Bachelors of Science Degree in Electrical Engineering
    • Master's Degree in Electrical Engineering or related technical field is preferred
    • 8+ years of relevant experience in a design environment is required
    • Experience in low voltage analog design.
    • Experience in high speed digital logic circuits including FPGA, ASICS and DSP.
    • Experience in circuit level design and adherence to military design guidelines.
    • A military/aerospace background and familiarity with the design life cycle including design, qualification and certification of electronics for aircraft applications is desired.
    • Familiarity with CCA Level design / Verification & Validation / Risk reduction efforts
    • The position may require a low amount of domestic travel (up to 3 times per year)
     
    Job Number: 82873
    Job Location: East Aurora, NY
    Rate: 60.00
    Per Diem: No
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: TWO ROADS PROFESSIONAL RESOURCES INC
    Attention: Kristan Anderson
    Address: 5122 BOLSA AVE STE 112
    City, State: HUNTINGTON BEACH, CA 92649
    Phone: 714/901-3804
    Fax Phone: 714/901-3814
    Website: www.2roads.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Assembler

    Description:
    Assembler

    Job ID # 2021-12947

    Contract Opportunity

    Location: Clearwater, FL

    Industry: Aerospace & Defense

     

    What You’ll Do:

    Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
    Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
    Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
    Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies.
    Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces
    Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned

    What You’ll Need:

    Must be able to read instructions and identify standard SMT components.
    Must be able to work in a fast-paced environment where some overtime may be required.
    Must be able to sit for long periods of time and focus on tedious tasks.
    Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
    Mandatory:
    Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
    Ability to work under a microscope for long periods of time to perform inspection / solder repair.
    Must be able to read and interpret assembly drawings.
    Strong communication and organizational skills and ability to work in a team oriented environment.
    Desired:
    Experience working in a LEAN Manufacturing environment
    Strong leadership, mentoring and training aptitude
    IPC-610 Certification
    IPC J-STD-001 Certification

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-12947
    Job Location: Clearwater, FL
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 12 Months
    Input Date: 04/30/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Assembler

    Description:
    Assembler

    Job ID # 2021-12928

    Contract Opportunity

    Location: Clearwater, FL

    Industry: Aerospace & Defense

     

    What You’ll Do:

    Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.

    What You’ll Need:

    Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
    Must be able to read instructions and identify standard SMT components.
    Must be able to work in a fast-paced environment where some overtime may be required.
    Must be able to sit for long periods of time and focus on tedious tasks.
    Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
    Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
    Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies.
    Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces
    Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned
    Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
    Ability to work under a microscope for long periods of time to perform inspection / solder repair.
    Must be able to read and interpret assembly drawings.
    Strong communication and organizational skills and ability to work in a team oriented environment.
    IPC-610 Certification
    IPC J-STD-001 Certification

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-12928
    Job Location: Oldsmar, FL
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 12 Months
    Input Date: 04/29/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Assembly Operator

    Description:
    Chipton-Ross is seeking an Assembly Operator for an opening in Tempe, AZ.

    RESPONSIBILITIES:
    The Assembly Operator's primary function is to perform a variety of tasks to assemble potted modules that meet all specifications and that only quality product moves forward. The ideal candidate must be able to multitask in a manufacturing environment for the purpose of assembling or inspecting night vision assemblies against set criteria with collected data for use in the production and compliance assurance of image tubes.

    All of the work will be performed in an environment that requires prolonged sitting or standing.


    Must be able to consistently report to work and be on time for scheduled shift
    Ability to work with small fragile parts
    Ability to follow work instructions and make operation entries on computer terminals
    Microscope and inspection experience
    Use of hand tools and specialized testing equipment
    Participate in process improvements
    Keep work area orderly and clean
    Teamwork oriented
    Work with engineering and engineering technicians
    Perform other duties as assigned

    REQUIREMENTS:
    1 to 2 years related work experience
    Previous ISO environment experience
    Attention to detail
    Knowledge of all safety (mechanical, chemical, electrical) procedures applicable to the job
    J-STD solder certification and/ or experience preferred
    Lean manufacturing principles and 5-S
    Computer experience required and Microsoft literacy preferred

    EDUCATION:
    HSD/GED

    SHIFT:
    9/80 work week
    2:30 P.M. to 12:00 A.M.
     
    Job Number: 189461
    Job Location: Tempe. AZ,
    Rate: Up to $15.00 DOE
    Duration: 5 months
    Input Date: 04/10/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Andrew Craft
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: acraft@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Associate Software Engineer

    Description:

    Base2 Solutions (a Belcan Company) is a technology consulting firm where each day offers new opportunities to learn, innovate, and have real impact. Base2 Solutions was selected by the Puget Sound Business Journal as one of 2020's Best Places to Work. For the sixth year in a row in Washington and for four years in a row in Orange County, these publications have recognized Base2 for its commitment to fostering an innovative culture and its dedication to providing employees with a great work experience.



    Our headquarters are in downtown Bellevue, Washington with an additional office in Brea, California.



    This position is for our Brea, CA location. Work in this critical defense project will be performed onsite. Candidates must be willing to work on location at a customer site near Brea.





    What we are looking for:



    We are looking for passionate Associate Software Engineers that demonstrate a high level of attention to detail and a commitment to quality. This is a great opportunity to join a well-established consultancy dedicated to growing and supporting our people and providing world-class solutions for our customers.





    What you will be responsible for:



  • Write unit tests and functional tests
  • Participate in ensuring that documented processes and conventions are maintained throughout the development effort
  • Participate in code reviews
  • Learn and keep abreast of current and new technologies and tools related to your field



  • What we believe is required to do the job:



  • Willingness to work on defense projects (required)
  • US citizenship (customer requirement, dual citizenship cannot be accepted)
  • Bachelor's degree in Computer Science, Computer Engineering, or Electrical Engineering strongly preferred
  • A good working knowledge of C/C++
  • Familiarity with MATLAB and Simulink
  • Familiarity with Git and Jira (optional, but highly preferred)
  • Solid foundation in Computer Science fundamentals
  • Show a passion for technology and a willingness to learn
  • Detail oriented mindset, and a willingness to apply that to software quality
  • Precise and efficient communication skills



  • This is for direct hire only. We are not able to offer Visa sponsorship nor are we accepting contractors placed through agencies/other companies.



    Base2 is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and provide equal employment opportunity to all employees and applicants without regard to race/ethnicity, color, national origin, sex/gender, sexual orientation, religion, age, disability, veteran status, or any other protected status. Should you have questions regarding our Affirmative Action Plans or wish to view the available portions of the plans, please send an email to recruiting@base2s.com with your contact information.



    If you need a reasonable accommodation for any part of the employment process, please send an e-mail to recruiting@base2s.com and let us know the nature of your request, along with your contact information. Please note that only those inquiries concerning a request for reasonable accommodation or our Affirmative Action plan will be responded to from this e-mail address.



    This job description is Base2's general Associate Software Engineer position. A candidate's level will be evaluated during the interview process.


     
    Job Number: 310839
    Job Location: Brea, CA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/29/2021
    Last Updated: 05/06/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: KeturahCarhee
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    AutoCAD - Electrical Designer

    Description:
    Revise detailed electrical schematics and system diagrams Utilize computer-aided design equipment and/or graphic tools Solidworks and AutoCAD.

    Design of point to point cable assemblies using Mil STD connectors at one or multiple ends.

    Create cable labeling drawings (cable installations) Contribute design modifications to improve quality of product or facilitate manufacturing operations

    Education/experience:
    Associate’s degree or equivalent experience Minimum of 7 years of experience in electrical drafting/design Have experience in AutoCad. Solidworks Electrical experience a plus.
    Possess the skills to prioritize assignments and flexibility to adjust to changing priorities based on program needs.
    Ideal candidate will have experience with ASME Y14 and Mil Standards.
     
    Job Number: TX5230
    Job Location: Arlington, TX
    Rate: 35
    Per Diem: offered
    Overtime: Possible
    Duration: 12 Months
    Start Date: 2/3 wks from offer
    Input Date: 04/27/2021
    Last Updated: 06/11/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    Automotive - Driver

    Description:
    Core Responsibilities:  
    • Safely drive Continental vehicles, routinely along a well defined and documented route.
    • Provide a written summary to include the vehicle driven, number miles driven, hours driven, and project number supported at a minimum for each test drive.
    • Must be aware of ADAS technologies and basic computer skills.
    • Required to verify correct operation of the installed vehicle data acquisition system. 
    • He/she will report to and receive training, daily guidance and work packages from the ADAS Supervisors and their staff.
    • Additional support and guidance will be provided by the Contract Company’s Team leader.
    • Willing and able to travel occasionally in support of test activities.
    • Provide detailed expense reports with all receipts within 1 week of incurring expenses.
    • Provide timesheets within 1 week of work performed.

    Qualifications:
    • Valid driver’s license with clean driving record for the last five years. 
    • Tier II certification or training experience maneuvering vehicles.
    • Ability to safely operate regular vehicles.
    • Able to drive a manual transmission.
    • Must be able to demonstrate the necessary driving skills to become certified to drive on Company's or Customer proving grounds
    • Well motivated, self starter, high integrity and team player
    • The candidate must be able to clearly and effectively communicate in English
    • Familiarity with new vehicle technology including Navigation systems, blind spot detection, active cruise control, lane departure warning, automated high beam assist, blue tooth, etc.
    • Must be able to lift and carry 25 pounds.

    Preferred Qualifications and Desired Competencies:

    • Knowledge of automotive on board test instrumentation.
    • Previous experience with ADAS.
    • Basic vehicle maintenance and electrical knowledge.
    • Computer proficiency with the Microsoft office suite (Word, Excel, and PowerPoint)

     
    Job Number: 2010123026
    Job Location: Carpinteria, CA
    Duration: 6 months
    Input Date: 12/23/2020
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Melissa Cuellar
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PLXUQA4&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Automotive Technical Subject Matter Expert

    Description:
    Indotronix is looking for an Automotive Technical Subject Matter Expert with experience in the aftermarket repair service field. This is a long term job opportunity in Troy, MI.

    Job Description
    This position works closely with a curriculum development team and other automotive subject matter experts to research, develop and validate technical training courses. The final candidate will have strong all around knowledge of automotive systems with in-depth experience in powertrain, electrical, HVAC and braking systems.

    Required Skills:
    • Minimum four years’ automotive aftermarket service technician experience
    • Master ASE certification in all areas A1 through A8, and L1
    • Understanding of the typical aftermarket automotive service environment including non-technical processes and procedures
    • Experience mentoring or instructing other technicians
    • Technical writing experience
    • Highly motivated and task driven, self-starter
    • Ability to complete tasks with minimum supervision
    • Ability work on multiple projects at the same time
    • Strong working knowledge of Word, PowerPoint and Excel

    Desired Skills:
    • ASE certification A9
    • Technical experience/knowledge of European or Asian brands
    • Additional training and/or hands on service experience with any of the following:
    o engine performance
    o Advanced Driver Assistance Systems
    o Electric Vehicles (EV)
    o diesel

    • Working knowledge of Articulate Storyline 360
    • Understanding of a typical training center environment Education Desired
    • Associates degree in Automotive Technology or equivalent experience
    • High School diploma with eight years automotive aftermarket technician experience may be considered in lieu of degree
     
    Job Number: 11880881
    Job Location: Troy, MI
    Rate: Hourly
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term
    Start Date: ASAP
    Input Date: 04/30/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Gary
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    Automotive Technicians

    Description:
    Summary:
    The main function of an electronics technician is to lay out, build, test, troubleshoot, repair, and modify developmental and production electronic components, parts, equipment, and systems, such as computer equipment, applying principles and theories of electronics, engineering mathematics, electronic and electrical testing. A typical electronics technician has the ability to make engineering drawings, and read and interpret blueprints.


    Job Responsibilities:
    • Read blueprints, wiring diagrams, schematic drawings, and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
    • Test electronics units, using standard test equipment, and analyze results to evaluate performance and determine need for adjustment.
    • Perform preventative maintenance and calibration of equipment and systems.
    • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
    • Maintain system logs and manuals to document testing and operation of equipment.
    • Write reports and record data on testing techniques, laboratory equipment, and specifications to assist engineers.
    Track and document repairs, truck configurations, and Truck records.
    • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools

     
    Qualifications:
    • Creativity, verbal and written communication skills, analytical and problem solving ability.
    • Team player and detail oriented.
    • Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
    • Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
    • Knowledge of the practical application of engineering science and technology.

    • Bachelor's degree in engineering required.
    • 5-7 years experience required.

     
     
    Job Number: 2010122253
    Job Location: Portland, OR
    Duration: 6 months
    Input Date: 04/07/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Jack Beard
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PGzcQAG&URLSource=cjhunter

    Aviation Mechanics - Clearance

    Description:
    Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

    Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
    Several Openings For:
    • General Mechanic
    • Electrical
    • Structures
    • Avionics Tech
    • Quality Inspection
    • Supply Chain Specialist


    Great Opportunity for Ex-military/Exiting Military/ and Veterans
    Previous military experience a plus!


     
    Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
    Required- Minimum of 5 years' experience working on 747 platform.
    Tools: no tools required
    Location: San Antonio, Texas

    ***Current Security Top Secret Clearance required
    US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

    **submittal must reference Job ID number 1710063637

    Camille Zunker- czunker@pdstech.com
     
    Job Number: 1710063637
    Job Location: San Antonio, TX
    Duration: 12 months
    Input Date: 11/14/2020
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Camille Zunker
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 11/23/2020
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    Avionics Electrical Engineers

    Description:
    Jets experience a plus
     
    Job Location: Southeast
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: jmac@advancedtechno.com
    Website: www.advancedtechno.com

    Avionics Electrical Engineers

    Description:
    Jets experience a plus
     
    Job Location: Midwest
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: jmac@advancedtechno.com
    Website: www.advancedtechno.com

    Avionics Technician

    Description:
    Chipton-Ross is seeking a Product Repair Tech for an opening in Mountain Home AFB, ID.

    RESPONSIBILITIES:
    Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

    Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of an aerospace vehicle.
    Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes

    REQUIRED EXPERIENCE:
    Minimum of 3 years' experience with Avionics and/or Electrical systems


    REQUIREMENTS:
    Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring
    Ability and understanding of routing instructions and handling of harnesses.

    PREFERRED DESIRED QUALIFICATIONS:
    F-15 maintenance experience

    EDUCATION:
    Accredited basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

    FULL TIME/FIRST SHIFT
    WORK HOURS: Full-Time

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 190841
    Job Location: Mountain Home AFB, ID
    Rate: $DOE
    Duration: 12 months
    Input Date: 04/23/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Juan Saldarriaga
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jsaldarriaga@chiptonross.com
    Website: www.chiptonross.com

    Avionics Technician IV

    Description:
    An Avionics Technician IV job in Louisville, Colorado is currently available through Belcan. You will be responsible for using your skills and expertise to perform a variety repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will need an High School Diploma and +10 years of Avionics equipment repair experience in Satellite/Aerospace/Aviation/Defense equipment.

    JOB DUTIES:
    * Leads a group through the build and test processes to support production efforts
    * Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers
    * Works with the program team to support the production schedules
    * Performs wiring harness routing and installation in confined spaces following specified procedures
    * Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards
    * Tests electrical assemblies by manual and automated means
    * Assists engineering with performing tests, collection of test data, troubleshooting, and assessing the manufacturability of new cabling designs
    * Performs basic mechanical and electrical removals and installations
    * Performs and documents all work according to established company processes
    * Observes all safety precautions when working with ESD sensitive hardware

    REQUIREMENTS:
    * +15 years of Avionics Experience
    * HS Diploma min
    * Modifications, Repairs, Assemblies
    * Avionics Installation, tooling, wiring, wiring repair, soldering, crimping
    * Familiarity with FCC and FCC GROL
    * Ability to mentor and guide subordinates
    * Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
    * Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
    * Clean room experience
    * NASA 8739.4 certification and/or IPC-620 with Space Addendum
    * Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
    * The ability to obtain and maintain a Security Clearance may be required


    If you are interested in this Avionics Technician IV job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




     
    Job Number: 312221
    Job Location: Louisville, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 05/04/2021
    Last Updated: 06/12/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: FrancisOsolnick
    City, State: West Region
    Email: fosolnick@belcan.com
    Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=312221&job_number=312221

    Avionics and Electrical Systems Installation Engineer

    Description:
    Minimum Requirements
    Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
    • Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
    • Strong computer, written and verbal communication skills required.
    • Time management skills are required to work multiple concurrent projects of various size and scope.
    • Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
    • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

    Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

    Description/Comment:
    The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
    ========
    If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
    call Peggy at 774-210-4108 Referrals appreciated!!
     
    Job Number: PL Avionics
    Job Location: KS & GA
    Rate: 70/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6-12+ months
    Start Date: 2-3 weeks
    Input Date: 04/23/2021
    Last Updated: 06/11/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    Avionics/Electrical Tech Sr

    Description:

    PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



    Position Purpose:
    Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:



    •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
    • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Oversees the performance and compliance with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
    • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
    • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
    • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
    • Maintains required logs and records.
    • Adapts to sudden schedule changes.
    • Coordinates with other disciplines concerning projects. 



    Additional Functions:



    • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Self inspection capability for all avionics testing functions in applicable areas.
    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



    For Additional Information on this Opening Please Contact Lynn Byers: 
    Direct Number: 843-277-6928
    Email Your Updated Resume to lbyers@pdstech.com

     



    Education and Experience Requirements:
    High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 

    Unique Skills:



    Knowledge in catia v5, solumina, and SAP preferred but not required.



    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • APU run qualification and engine run qualification preferred.
    • Ability to read and interpret basic blueprints and schematic diagrams.



      



     



     

     
    Job Number: 2110127922
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/05/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcxoQAC&URLSource=cjhunter

    Avionics/Electrical Engineer (Contract)

    Description:

    PDS is looking for an Avionics/Electrical Engineer in Wichita, KS:



    In your role, you will:

    • Review certification plans
    • Write development and certification test procedures (Test Definition Sheets)
    • Plot and analyze ground and flight test data
    • Create flight test reports containing data demonstrating proper system operation as required by TC/FAA/EASA Regulations
    • Assist technicians in troubleshooting aircraft avionics system problems
    • Create development engineering documentation for design changes, in a flight test environment
    • Provide system performance analysis to ensure proper operation as per the design specification


    Qualifications
    As our ideal candidate,
    • You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in Avionics systems design and certification OR a minimum of 12 years’ experience if no degree.
    • You must have previous experience of supporting aircraft ground, flight, and functional testing. 
    • You have a working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems. (preferred)
    • You must have a good working knowledge of FAA & EASA Part 25 certification requirements.
    • You must have working knowledge of RTCA documents DO-178 and DO-160.
    • You must have the ability to interpret software documentation including logic diagrams related to avionics systems.
    • You must have experience with utilizing ARINC data to isolate faults related to system controls software.
    • You will demonstrate good teamwork and English communication skills, both oral and written, and be PC literate.
    • You will demonstrate interpersonal skills necessary to establish and maintain effective working relationships with co-workers, employees, management and suppliers.
    • You must be self-motivated, able to coordinate multiple activities and manage time effectively.


     
    Job Number: 2110127190
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 03/24/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rick Ingle
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PavfQAC&URLSource=cjhunter

    CREO Mechanical Engineers and Designers

    Description:
    Looking for CREO degreed and non degreed Mechanical Engineers and Designers with heavy vehicle design experience. Also need CREO Cable Harness Design Engineers with BS Degrees.Develop mechanical assemblies, test equipment racks, and electrical harnesses
    Creo (Pro/Engineer)/ Windchill
     
    Job Number: PL CREO
    Job Location: WA,CA, PA, AZ
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6-12 months
    Start Date: 2 weeks
    Input Date: 04/15/2021
    Last Updated: 06/11/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    Chief Engineer

    Description:

    The Chief Engineer: Lunar Lander will lead the design, assembly, test and operations of the lunar lander. The ideal candidate will have experience with the full life cycle of space programs from conception to operations and have proven success in leading engineering teams to achieve ambitious goals.
    Duties & Responsibilities



    • Lead the technical decision-making process and guide technical development across all lunar lander subsystems disciplines 
    • Lead technical reviews, engineering change, and configuration management process adherence
    • Oversee vehicle level systems engineering processes including trade studies, applying industry standards, requirements development, verification and validation planning
    • Identify technical issues and proactively implements resolutions to mitigate schedule and cost impacts
    • Provide technical mentorship to team members and monitor technical integrity of all team member contributions

     
    Professional Requirements

    • A Bachelor’s degree, Master’s or PhD preferred -- in Aerospace, Electrical, or Mechanical Engineering.
    • Experience as the technical lead designing, developing, building, and testing of spacecraft or satellites.
    • A minimum of 5 years of experience in design, development, test, and operations across multiple programs
    • Experience taking a product from concept phase through prototyping, launch and operations
    • Must be able to quickly develop subject matter expertise in a specific project.
    • Previous experience in a technical leadership role for a complex aerospace project.


    • A strong grasp of systems engineering practices 
    • Excellent communication skills

    Additional Desired Skills and Experience --  

    • A minimum of 10 years experience in design, development, test, and operations across multiple programs 
    • Experience with lunar or deep space missions and technology development for these missions
    • Hands on experience in assembly, integration and testing of space hardware


     
    Job Number: 2110129523
    Job Location: Mojave, CA
    Duration: 36 months
    Input Date: 04/23/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PhIOQA0&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Interiors

    Description:
    Unique Skills:
    • Capitol Harness &/or Mentorgraphics experience • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic • Familiarity in mechanical system design preferred. • Analyze Electrical designs in 3D models preferred. • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    Experience credit considered for related advanced degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services
    Principle Duties and Responsibilities:

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 164791
    Job Location: Savannah, GA
    Rate: $60.00
    Per Diem: Possible
    Overtime: Yes
    Duration: Open End Contract
    Start Date: ASAP
    Input Date: 03/23/2021
    Last Updated: 05/10/2021
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Kerry Moreland
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Manager - Level 2 / Level 3

    Description:
    Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

    ** Candidates must be U.S. Citizens without Dual Citizenship **
    ** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

    Duties:
    Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

    30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
    30% - Perform validation of manufacturing bills-of-material and their attribute data.
    15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
    15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
    10% - Participate in preparation for and leadership of Configuration Control Boards.

    Skills:
    -Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
    -Experience and knowledge of PTC Windchill desired.
    -Knowledge of design, development and manufacture of mechanical and electrical systems desired.
    -Oracle ERP is highly preferred but not required
    -Proficiency with Microsoft Office products (e.g. Word, Excel, PowerPoint) required.

    Education:
    -Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
     
    Job Number: 15169
    Job Location: Huntsville, AL
    Rate: $45.00 - $53.85/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 12 Mos
    Start Date: ASAP
    Input Date: 04/19/2021
    Last Updated: 05/18/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Manager Level 2 / Level 3 (Contract)

    Description:
    Configuration Manager Level 2 / Level 3 (Contract) - Huntsville, AL

    Pay Rate: 53hr

    Overview:
    • ** Candidates must be U.S. Citizens without Dual Citizenship **
    • ** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **
    • Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.
    o 30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
    o 30% - Perform validation of manufacturing bills-of-material and their attribute data.
    o 15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
    o 15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
    o 10% - Participate in preparation for and leadership of Configuration Control Boards.

    Skills:
    • Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
    • Experience and knowledge of PTC Windchill desired.
    • Knowledge of design, development and manufacture of mechanical and electrical systems desired.
    • Oracle ERP is highly preferred but not required Proficiency with Microsoft Office products (e.g. Word, Excel, and PowerPoint) required.
    • Additional Skills: CAD / Electrical Systems / Operations / Change Management

    Education:
    • Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
     
    Job Location: Huntsville, AL
    Rate: 53.00
    Per Diem: split
    Duration: 6 mos +
    Start Date: asap
    Input Date: 04/22/2021
    Firm Name: NESC STAFFING
    Attention: Jacob Arenstein
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    Construction Supervisor

    Description:
    Chipton-Ross is seeking a Construction Supervisor for an opening in San Diego, CA.

    RESPONSIBILITIES:
    Develop, deliver, and present project plans and schedule.
    Develop contract documents for work activities (civil, structural, mechanical, electrical); lead job walks; support proposal review and selection.
    Review and approve construction submittals.
    Present Environmental, Health, and Safety (EH&S) requirements to contracted workers coming onsite, review plans for safety concerns, and monitor job site for safe practices.
    Proactively monitor and verify work activities are progressing according to schedule; identify concerns and develop mitigations. Report on project status.
    Conduct inspection and operational verification of installed components and systems, includes equipment such as pumps and motors, in accordance with design drawings/specifications and industry practices.
    Verify quality of work and coordinate inspection by the Quality Assurance group.
    Review and approve invoices.
    Manage change orders and revision of contract documents.
    Create punch lists and see-through correction of defective work.
    Supervise system startup and commissioning.
    Supervises the budgetary, costing and final inspection of construction projects.
    Supervises outside contractors and conducts construction surveillance to ensure adherence to construction requirements.
    Ensures compliance with company policy, procedures and safety regulations.
    Documents and maintains required paperwork pertaining to work projects.
    Maintain the strict confidentiality of sensitive information.
    Performs other duties as assigned.


    REQUIREMENTS:
    May substitute equivalent experience in lieu of education. Must demonstrate expertise of building and site design, construction, operation and maintenance as well detailed and extensive knowledge of design and construction methods and processes related to building construction and maintenance. Must have knowledge of codes, standards and regulations as they apply to design, construction, operations and maintenance of buildings and building sites. Must be able to organize, schedule, conduct, and coordinate workloads and staff to meet established milestones. Must be customer focused and possess: (1) a valid California driver's license with a good driving record verified by the DMV; (2) the ability to identify issues, analyze and interpret data; (3) good analytical, verbal and written communication skills to accurately document, report, and present findings to a variety of audiences including management and external parties; (4) strong interpersonal skills to influence and guide all levels of employees; (5) the ability to maintain the confidentiality of sensitive information; (6) the ability to select, train, and motivate personnel; (7) the ability to represent the company on external projects; and (8) strong computer skills. Must be able to work extended hours and travel as required

    Must demonstrate expertise of building and site design, construction, operation and maintenance as well detailed and extensive knowledge of design and construction methods and processes related to cooling water system piping fabrication and installation.
    Must have knowledge of codes, standards and regulations as they apply to design, construction, operations and maintenance of buildings and building sites.
    Must be able to organize, schedule, conduct, and coordinate workloads and staff to meet established milestones.
    Must be customer focused and possess: (1) the ability to identify issues, analyze and interpret data; (2) good analytical, verbal and written communication skills to accurately document, report, and present findings to a variety of audiences including management and external parties; (3) strong interpersonal skills to influence and guide all levels of employees; (4) the ability to maintain the confidentiality of sensitive information; (5) the ability to represent the company on external projects; and (6) strong computer skills.
    Must be able to work extended hours and travel as required.


    EDUCATION:
    Bachelor's degree in architecture, engineering, facilities management or a related discipline and nine or more years of progressive professional experience in construction or facilities management with at least three of those years in a management role.

    SHIFT:
    5/40
     
    Job Number: 190766
    Job Location: San Diego, CA
    Rate: $DOE
    Duration: 7 months
    Input Date: 04/20/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Silmese Graves
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: sgraves@chiptonross.com
    Website: www.chiptonross.com

    Controls Model Development & Analysis Systems Engineer

    Description:
    This position requires translation of textual requirements into Matlab/Simulink models which are then used to automatically generate the associated software source code. The successful candidate is proficient in modeling, simulation and analysis of control systems.

    REQUIRED SKILLS:

    * Bachelor's degree in Computer Science or Electrical/Computer/Aerospace Engineering
    * Aerospace components modeling experience
    * Ability to translate textual requirements into Matlab/Simulink models
    * Tools usage: Matlab/Simulink, DOORs, Configuration management tool experience
    * Effective communication skills (both verbal and written)
    * Self-motivated, accountable, detail-oriented

    THE FOLLOWING SKILLS WOULD BE A PLUS:
    * Engine Controller product experience
    * Control Logic experience
    * Control Laws development experience

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: StTm/OT
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 05/27/2021
    Last Updated: 06/09/2021
    Firm Name: REAL TIME CONSULTING
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Email: rtc-talentmgmt@real-time-consulting.com
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Creo Product Definition & Verification (Checking) Designer

    Description:
    Under limited general direction and following established procedures in accordance with contractual requirements and the client's policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.
    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
    30% - Performs design calculations to validate any phase of design requirements.
    20% - Estimation of resources and schedule required to complete a design activity and training to staff.
    10% - Provide technical guidance to less senior CAD designers and to design support personnel.

    * 10 years as a drawing and model checker for Aerospace mechanical hardware**

    ** Strong proficiency using GD&T per ASME Y14.5 **

    ** 5-10 years Creo and Windchill PLM System **

    10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
    -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    -Electronic markup tools and the ability to work paperless is required.

    Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
     
    Job Number: 82812
    Job Location: Canoga Park, CA
    Rate: $60.00/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: TWO ROADS PROFESSIONAL RESOURCES INC
    Attention: Kristan Anderson
    Address: 5122 BOLSA AVE STE 112
    City, State: HUNTINGTON BEACH, CA 92649
    Phone: 714/901-3804
    Fax Phone: 714/901-3814
    Website: www.2roads.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DO-254 Low-Level Verification Test Developer

    Description:
    ABOUT THE JOB:
    This position is responsible for DO-254 Design Assurance Level A (DAL A) low-level verification test development for a custom, dual lane, system on a chip (SoC).

    REQUIRED SKILLS:
    • BS Degree in Electrical Engineering (BSEE)
    • 5+ years DO-254 certification experience
    • Experience developing verification tests for low-level silicon devices
    • Experience developing low-level test scripts in C-language
    • Familiarity with DOORS for requirement capture
    • Familiarity with PCIexpress architecture
    • Proven ability to quickly learn quickly and understand new technology
    • Effective verbal and written communication skills

    PREFERRED SKILLS:
    • Familiar with DO-178
    • Previous ASIC certification test experience
    • Familiarity with GPM300C / 777X platform

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: 5 mo +
    Start Date: ASAP
    Input Date: 04/30/2021
    Last Updated: 05/10/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    Design and Analysis Engineer

    Description:
    PDS Tech, Inc. is seeking a Design and Analysis Engineer in Kent, WA
    Position Responsibilities:
    • Works with customers (internal and external) to develop and document complex avionics, electronic and electrical system requirements/architectures
    • Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
    • Develops trade studies, analyzes results, and performs design reviews
    • Develops and maintains electrical product detail, assembly and installation designs (e.g., power, harness routing and payloads)
    • Monitors supplier performance to ensure system integration and compliance with requirements
    • Delivers electrical sub-system components and supports integration
    • Conducts tests and validates electrical system to ensure system designs meet operational and functional requirements
    • Must possess good organizational, interpersonal, and problem solving skills
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments
    • Ability to adjust priorities to multiple demands and unanticipated events

    Basic Qualifications (Required Skills/Experience):
    • Must have a Bachelor's, Master's, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Preferred Qualifications (Desired Skills/Experience):

    • Electrical Engineering degree preferred
    • Electrical systems integration experience
    • Space-related product / program experience (i.e. satellites, spacecraft, missile systems, etc.)

    Typical Education/Experience:
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
     
     
    Job Number: 2110126746
    Job Location: Kent, WA
    Duration: 12 months
    Input Date: 03/03/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PZU7QAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer

    Description:
    Design and Analysis Engineer

    Job ID # 2021-12881

    Contract Opportunity

    Location: Berkeley, MO

    Industry: Aerospace & Defense

    Minimum Clearance: Ability to Obtain Security Clearance

    Minimum Education: Bachelor’s Degree

     

    What You’ll Do:

    Assist with the development and documentation of electronic and electrical system requirements.
    Develop or modify basic hardware and software designs based on defined requirements.
    Perform system tests to verify operational and functional requirements.
    Assist in monitoring suppliers'' performance to ensure compliance with requirements.
    Support resolution of product integration issues and production anomalies.
    Research basic technologies for potential application to company business needs.
    Support Systems team in St. Louis MO is seeking a talented EE System Design Engineer to fill a position in Ground Support Equipment in support of F-15, T-7, and other Air Force Programs (Domestic and Foreign).
    This entry level design position supports and manages total design, development, manufacturing, and test of Ground Support Equipment.
    Provide critical support of fielded hardware and software over the entire product lifecycle, assist with the development and documentation of electronic and electrical system requirements, develop or modify basic hardware and software designs based on defined requirements, perform system tests to verify operational and functional requirements, assist in monitoring suppliers' performance to ensure compliance with requirements, support resolution of product integration issues and production anomalies, and research basic technologies for potential application to company business needs
    Develop and document of electrical subsystems
    Perform system qualification tests to verify operational and functional requirements
    Support the resolution of product integration issues and production anomalies
    Work across product teams to ensure product integration

    What You’ll Need:

    Preferred Qualifications (Desired Experience & Skills)
    Multi-skilled engineering degree (Example - Electrical Engineering with Computer Science)

    Education & Experience:

    Bachelor’s Degree, Masters or Doctorate in Electrical Engineering, relevant Engineering, Computer Science, Mathematics or Physics.

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
     
    Job Number: Job ID # 2021-12881
    Job Location: Berkeley, CA
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 12 Months
    Input Date: 04/20/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Design and Analysis Engineer 1

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 1 for an opening in Berkeley, MO.

    RESPONSIBILITIES:
    This entry level design position supports and manages total design, development, manufacturing, and test of Ground Support Equipment. Individual will provide critical support of fielded hardware and software over the entire product lifecycle, assist with the development and documentation of electronic and electrical system requirements, develop or modify basic hardware and software designs based on defined requirements, perform system tests to verify operational and functional requirements, assist in monitoring suppliers' performance to ensure compliance with requirements, supports resolution of product integration issues and production anomalies, and researches basic technologies for potential application to company business needs. Position Responsibilities:
    Development and documentation of electrical subsystems
    Performing system qualification tests to verify operational and functional requirements
    Supporting the resolution of product integration issues and production anomalies
    Working across product teams to ensure product integration

    ADDITIONAL EXPERIENCE:
    Multi-skilled engineering degree (Example - Electrical Engineering with Computer Science)

    EDUCATION:
    Accredited Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, or physics is required. (Electrical Engineering preferred)

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:00 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 190541
    Job Location: Berkeley, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/09/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 2

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 2 for an opening in Berkeley, MO.

    RESPONSIBILITIES:
    The position in Ground Support Equipment in support of F-15, F-18, T-X, T-45, P-8 and MQ-25 platforms. This design position requires skills and experience to manage total design, development, procurement, manufacturing and test of all Ground Support Equipment. Develops and documents moderately complex electronic and electrical system requirements. Designs hardware, software and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Assists in monitoring supplier performance to ensure system integration and compliance with requirements. Solves problems concerning fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    POSITION RESPONSIBILITIES:
    Development and documentation of electrical subsystems and packaging of electronics
    Assist with monitoring supplier and manufacturing performance
    Support system integration and requirement verification
    Performing system qualification tests to verify operational and functional requirements
    Exercises critical thinking and innovative problem solving

    REQUIRED EXPERIENCE:
    Experience designing, documenting, and implementing electrical systems
    Support internal, informal peer reviews and formal design reviews with USAF and USN customers, as needed
    Software integration experience
    Excellent written and verbal communication skills
    Assist in informal and formal testing of support equipment, including aircraft and/or component physical and functional interface, as needed
    Work under general supervision and in collaboration with other engineers, designers and support staff

    ADDITIONAL EXPERIENCE:
    Experience working with cross-functional teams
    Ability to work flexible hours and occasional overtime

    EDUCATION:
    Accredited Bachelor's degree or higher.

    TRAVEL: YES
    Possible travel required.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:00 PM

    MISCELLANEOUS:
    Candidate will need to be local to STL as they will be required to be on-site 100% of the time.
     
    Job Number: 190468
    Job Location: Berkeley, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/02/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 2

    Description:
    PDS Tech, Inc. is seeking a Design and Analysis Engineer

    EMAIL RESUME TO: mmccarthy@pdstech.com or contact Mary Ann McCarthy  314-504-6039


    Position Responsibilities:

    •Development and documentation of electrical subsystems and packaging of electronics

    •Assist with monitoring supplier and manufacturing performance

    •Support system integration and requirement verification

    •Performing system qualification tests to verify operational and functional requirements

    •Exercises critical thinking and innovative problem solving

    SKIILS/EXPERIENCE

    Basic Qualifications (Required Skills/Experience):

    •Experience designing, documenting, and implementing electrical systems

    •Support internal, informal peer reviews and formal design reviews with USAF and USN customers, as needed

    •Software integration experience

    •Excellent written and verbal communication skills

    •Assist in informal and formal testing of support equipment, including aircraft and/or component physical and functional interface, as needed

    •Work under general supervision and in collaboration with other engineers, designers and support staff


    Preferred Qualifications (Desired Skills/Experience):

    Experience with any of the following is desired:

    •Bachelor's degree or higher

    •Experience working with cross-functional teams

    •Ability to work flexible hours and occasional overtime
     
     
    Job Number: 2110128268
    Job Location: Saint Louis, MO
    Duration: 12 months
    Input Date: 04/01/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PdtGQAS&URLSource=cjhunter

    Design and Analysis Engineer 3

    Description:
    PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Kent, WA

     Position Responsibilities

    Works with customers to develop and document complex electronic and electrical system requirements.
    Analyzes and translates requirements into system, hardware and software designs and interface specifications. T
    ests and validates to ensure system designs meet operational and functional requirements.
    Monitors supplier performance to ensure system integration and compliance with requirements.
    Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 2110126742
    Job Location: Kent, WA
    Duration: 12 months
    Input Date: 03/17/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PZTOQA4&URLSource=cjhunter

    Design and Analysis Engineer 4

    Description:
    PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Kent, WA

    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 2110126744
    Job Location: Kent, WA
    Duration: 12 months
    Input Date: 03/03/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PZTxQAO&URLSource=cjhunter

    Design and Analysis Engineer 4

    Description:
    PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Kent, WA

    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 2110126745
    Job Location: Kent, WA
    Duration: 12 months
    Input Date: 03/17/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PZU2QAO&URLSource=cjhunter

    Design and Analysis Engineer 4

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Berkeley, MO.

    RESPONSIBILITIES:
    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

    POSITION RESPONSIBILITIES:
    Development and documentation of electrical subsystems and packaging of electronics
    Assist with monitoring supplier and manufacturing performance
    Support system integration and requirement verification
    Performing system qualification tests to verify operational and functional requirements
    Exercises critical thinking and innovative problem solving

    REQUIRED EXPERIENCE:
    Experience designing, documenting, and implementing electrical systems
    Support internal, informal peer reviews and formal design reviews with USAF and USN customers, as needed
    Software integration experience
    Strong communication and interpersonal skills
    Assist in informal and formal testing of support equipment, including aircraft and/or component physical and functional interface, as needed
    Work under general direction and in collaboration with other engineers, designers and support staff
    Proven track record of planning and status of work, and to leading a small team
    Provide technical leadership across many programs

    ADDITIONAL EXPERIENCE:
    Experience working with cross-functional teams
    Ability to work flexible hours and occasional overtime
    Earned Value Management experience is a plus.

    EDUCATION:
    Accredited Bachelor's degree or higher.

    TRAVEL: YES
    Possible travel required.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:30 PM

    MISCELLANEOUS:
    Candidate will need to be local to STL as they will be required to be on-site 100% of the time.
     
    Job Number: 190465
    Job Location: Berkeley, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/02/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 4

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Kent, WA.

    RESPONSIBILITIES:
    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. Position Responsibilities:
    -Works with customers (internal and external) to develop and document complex avionics, electronic and electrical system lab requirements/architectures, including simulation requirements
    -Analyzes and translates requirements into lab architecture, hardware and software simulation designs and interface specifications
    -Develops trade studies, analyzes results, and performs design reviews
    -Develops and maintains electrical product detail, assembly and lab installation designs (e.g., power, harness routing and payloads)
    -Monitors supplier performance to ensure system integration and compliance with requirements
    -Supports fabrication and integration through disciplined trouble-shooting, problem-reporting, and root-cause corrective action processes. Integration activities involve avionics, mechanical systems and software.
    -Conducts tests and validates electrical system to ensure system designs meet operational and functional requirements
    -Must possess good organizational, interpersonal, and problem solving skills
    -Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments
    -Ability to adjust priorities to multiple demands and unanticipated events

    REQUIRED EXPERIENCE:
    - Must have a Bachelor's, Master's, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    ADDITIONAL EXPERIENCE:
    - Electrical Engineering degree preferred
    - Electrical power systems experience
    - Space-related product / program experience (i.e. satellites, spacecraft, missile systems, etc.)

    EDUCATION:
    Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 190032
    Job Location: Kent, WA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 03/15/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 4

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Kent, WA.

    RESPONSIBILITIES:
    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. Position Responsibilities:
    -Works with customers (internal and external) to develop and document complex avionics, electronic and electrical system lab requirements/architectures, including simulation requirements
    -Analyzes and translates requirements into lab architecture, hardware and software simulation designs and interface specifications
    -Develops trade studies, analyzes results, and performs design reviews
    -Develops and maintains electrical product detail, assembly and lab installation designs (e.g., power, harness routing and payloads)
    -Monitors supplier performance to ensure system integration and compliance with requirements
    -Supports fabrication and integration through disciplined trouble-shooting, problem-reporting, and root-cause corrective action processes. Integration activities involve avionics, mechanical systems and software.
    -Conducts tests and validates electrical system to ensure system designs meet operational and functional requirements
    -Must possess good organizational, interpersonal, and problem solving skills
    -Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments
    -Ability to adjust priorities to multiple demands and unanticipated events

    REQUIRED EXPERIENCE:
    - Must have a Bachelor's, Master's, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    ADDITIONAL EXPERIENCE:
    - Electrical Engineering degree preferred
    - Electrical power systems experience
    - Space-related product / program experience (i.e. satellites, spacecraft, missile systems, etc.)

    EDUCATION:
    Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 190031
    Job Location: Kent, WA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 03/15/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 5

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 5 located in El Segundo, CA.

    RESPONSIBILITIES:
    Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test. Development of module, board and slice-level requirements derived from higher-level unit requirements. Development and maintenance of performance budgets and analyses that flow into worst case unit analyses. Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists. Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    REQUIRED EXPERIENCE:
    Technical skills required are related to RF, Digital and Avionics Communications Subsystems Engineering with the following activities supported in terms of responsibility, authority and accountability:
    Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists.
    Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test.
    Development of module, board and slice-level requirements derived from higher-level unit requirements.
    Development and maintenance of performance budgets and analyses that flow into worst case unit analyses
    Supplier management activities at various supplier sites
    Requirements and verification support for Avionics units

    Leads work with customers to develop and document complex electronic and electrical system requirements.
    Oversees the design and build of multiple satellite and avionics units.
    Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
    Leads work to test and validate to ensure system designs meet operational and functional requirements.
    Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
    Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    Researches technology advances for potential application to company business needs.
    Makes recommendations for technology investments.
    Experience with digital circuit design.
    Knowledge of FPGAs/ASICs

    EDUCATION:
    Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    TRAVEL: YES - 10% travel

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 5:00 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 188537
    Job Location: El Segundo, CA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 12/02/2020
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 5 -

    Description:
    PDS Tech, Inc. is seeking a Design and Analysis Engineer, in El Segundo, CA

    Summary:

    • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

      Technical skills required are related to RF, Digital and Avionics Communications Subsystems Engineering with the following activities supported in terms of responsibility, authority and accountability:
      • Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists.
      • Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test.
      • Development of module, board and slice-level requirements derived from higher-level unit requirements.
      • Development and maintenance of performance budgets and analyses that flow into worst case unit analyses
      • Supplier management activities at various supplier sites
      • Requirements and verification support for Avionics units
      Leads work with customers to develop and document complex electronic and electrical system requirements.
      •Oversees the design and build of multiple satellite and avionics units.
      •Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
      •Leads work to test and validate to ensure system designs meet operational and functional requirements.
      •Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
      •Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
      •Researches technology advances for potential application to company business needs.
      •Makes recommendations for technology investments.
      •Experience with digital circuit design.
      •Knowledge of FPGAs/ASICs

    Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
     
    Job Number: 2010122559
    Job Location: El Segundo, CA
    Duration: 12 months
    Input Date: 12/11/2020
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Anna Ashcraft
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PIRqQAO&URLSource=cjhunter

    Die Maintenance

    Description:
    Job purpose
    Responsible for die maintenance, die installation, effective evaluation and repair of dies.
    Essential Functions
    • Support equipment / die downtime in a dynamic fast-paced environment.
    • Develop and support die maintenance and improvement projects.
    • Support weekend and shutdown die issues.
    • Support training of other die associates.


    • Support of the engineering group in short / long term projects.
    • Support machine checks, preventative maintenance duties, line troubleshooting and reporting of problems and repairs;

    Additional Responsibilities

    • Performs other duties as assigned.
    • Utilizes hand tools, power tools, and hoists/cranes to repair and maintain dies and associated equipment.
    • Utilizes calipers, micrometers and other gauges to evaluate production components.
    • May be trained and assigned to operate a forklift.
    • Keeps work area clean of debris and safety hazards.
    • Complies with Safety Policies and reports unsafe conditions.
    • May be trained and assigned to perform Plant Start-up & Shutdown Procedures and Weekend/Holiday Shutdown Facilities Check.
    • Work on daily activities as assigned by the Team Leader.
    • Respond to die downtime and recovery issues.
    • Monitor dies for potential problems identification.
    • Perform quality & running efficiency improvements to the dies.
    • Perform scheduled preventative maintenance plans & activities.
    • Quality confirmation of completed work.
    • Perform zone inspections.
    • Perform all phases of die and associated troubleshooting on electrical, mechanical, hydraulic, and/or pneumatic systems including process water controls and lines


    Education, Experience and Competencies

    • High School Diploma or equivalent and a minimum of five (5) years of experience as a maintenance technician.
    • Ability to read, write, speak and understand English well.
    • Must demonstrate capability of using hand and power tools.


    • Understands safety policies, quality policy and environmental policies.
    • Has basic understanding of GD&T etc.
    • Ability to analyze die & process problems and implement repairs & countermeasures for:


    • Hydraulic cylinder issues
    • Mechanical issues
    • Ability to weld & hard finish.
    • Demonstrate solid “Troubleshooting” skills.
    • General computer/data entry skills.
    • General electrical troubleshooting.
    • General machine tool knowledge.
    • Understanding of 2D drawings.
    • Ability to be a self-starter, learn on a continual basis, train others and work well in a team atmosphere.
    • Capability to work with minimal supervision.
    • Good communication skills.
    • Basic knowledge of mechanical, electrical, hydraulic, and pneumatic functions and components.
    • Ability to demonstrate a proactive approach with die maintenance and Ability to troubleshoot.
    • Team Oriented.


    • Self-starter imitative / Drive/ Eager to learn.


     
    Job Number: 2110130144
    Job Location: Ridgeville, SC
    Duration: 6 months
    Input Date: 04/27/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Jack Beard
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pj0VQAS&URLSource=cjhunter

    ELECTRICAL ASSEMBLER

    Description:
    Displays knowledge of Electrical Theory and usage of NEC and NFPA 79 in the assembly of machines with AC and DC circuits. Reads engineering drawings to assemble, rebuild, and repair electrical components.  Sets up and operates a variety of power tools (such as drill press, band saw and stud welder), to assist in the assembly of machines and components. Works unsupervised and provides training and cross-training to other employees. Coordinates with engineering personnel, and makes changes as required to update print packages.
    ESSENTIAL DUTIES:
    Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electrical equipment.
    Assembles electrical components, sub-assemblies, and systems according to engineering drawings.  Positions and aligns parts in specified relationship to each other.  Mounts assembled components and attaches functional and cosmetic hardware such as caps, clamps and knobs.
    Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures.
    Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves.  Tests for proper sequencing of machine operations. Assists R & D technicians and engineering in developing new equipment.
    Sets up and operates a variety of hand tools such as drill press, saws, shear and break.  Operates tow motor, pallet jack, hoist, pipe bender, pipe threader, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
    Uses business system to enter time spent working on assemblies/sub-assemblies and to complete operations.
    Uses PC to interface with programmable controllers and servo modules, transfer drive parameters and run diagnostics checks.  Must be able to manually load programs into electrical components.
    Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in house testing and field installation of machinery.
    Coordinates with engineering to ensure Engineering Change Requests are submitted.
    Ensures that Engineering Change Orders are processed and assembled.
    Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
    Assists other departments to optimize throughput.
     
    Completion of a Vocational Diploma in an electrical-related field, or equivalent experience or training. Must be computer literate and capable of reading engineering drawings.  Must have tools required to perform daily routines. Must be capable to set up and operate power tools.  Possesses basic knowledge of oscilloscope. Position requires a team player who is quality conscious, industrious and detail oriented. 

    2nd shift Hours:  Mon-Thurs 2:25pm to 12:55am, 4-10's
    3rd Shift Hours:  Mon-Thurs 9:30pm to 8:00am, 4-10's
     
     
    Job Number: 2110126340
    Job Location: Appleton, WI
    Duration: 6 months
    Input Date: 04/12/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Tyler Belisle
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PY5lQAG&URLSource=cjhunter

    Electrical Aircraft Interiors Engineer with Mentorgraphics

    Description:
    ===========================================
    Engineer Contractor 3 - Electrical Interiors in Savannah, GA
    Unique Skills:
    • Capitol Harness &/or Mentorgraphics experience
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
    • Familiarity in mechanical system design preferred.
    • Analyze Electrical designs in 3D models preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
    • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
     
    Job Number: PL Elec Interiors
    Job Location: Savannah, GA
    Rate: $60-65/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2-3 weeks
    Input Date: 03/23/2021
    Last Updated: 06/11/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
    Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);

    Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred.
     
    Job Number: 21-161201
    Job Location: GA
    Rate: $66.00 - $70.00
    Per Diem: Split
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/03/2021
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Electrical Applications Engineer (7 needed)

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

    Unique Skills:
    • Candidate must have in depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1)
    • In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
    • Extensive knowledge of EWIS component selection criteria
    • Experience with Mentor Graphics Capital Harness System (CHS) preferred

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-524
    Job Location: Savannah, GA
    Rate: $66-70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/02/2021
    Last Updated: 06/10/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Electrical Assembler B

    Description:
    Chipton-Ross is seeking an Electrical Assembler B for an opening in Rochester, NY.


    RESPONSIBILITIES:
    Performs routine assembly operations of a repetitive nature on electro mechanical components and subassemblies in the product line in accordance with the company's procedures for safety and quality.
    Fits, aligns, and adjusts parts and components; Attaches hardware and seals assembly; Solders, lugs, routes, and ties electrical components.
    Works with samples, simple drawings, as well as written and verbal instructions. Uses hand tools such as long nose pliers, power screwdrivers and soldering iron to perform work.
    Assist with final quality testing of finished systems to make sure each is functioning according to customer specifications prior to shipment.
    Maintain accurate documentation of product test results and update troubleshooting logs.
    Accept a dynamic work schedule at times, including late nights and weekends.
    Inspects product as it is being built and refers any problem to Supervisor.
    Daily communication with all team members and supervisor.
    Provide high quality and timely service to all internal customers.
    Listen to and understand customer requirements and take prompt, appropriate action that exceeds expectation.
    Assists with continuous improvement activities and compliance to 5S program.
    Perform all other related duties as assigned


    REQUIREMENTS:
    Minimum 4 years of electrical/electronic assembly experience or equivalent combination.
    IPC 610 and J Standard 0001 Certificate Preferred; requires previous assembly experience
    Must have experience in soldering and assembly using tools such as hand tools such as long nose pliers, power screwdrivers and soldering iron.
    Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.


    Must be detailed-oriented and have the ability to multi-task to meet multiple deadlines.
    Communicates with contacts typically within the department on matters that involve obtaining or providing information.
    Work to develop customer relationships through collaboration, respect, professionalism, trust and integrity.
    Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.
    Works to obtain operational targets within department.

    LANGUAGE SKILLS: Ability to read, analyze and interpret procedures. Ability to follow written and verbal instructions.

    MATHEMATICAL SKILLS: Ability to add, subtract, multiply and divide in all units of measure using whole numbers, fractions and decimals.

    REASONING ABILITY: Ability to apply common sense understanding to carry out instructions and solve practical problems; deal with a variety of concrete variables in standardized situations. Ability to define problems, collect data.

    PHYSICAL DEMANDS: While performing the duties of this position, the employee is required to stand, walk, sit; use hands to finger, handle and feel; reach with hands and arms; talk and hear. The employee may occasionally stoop or crouch, lift and/or move up to 50 lbs. Specific vision abilities include close vision, color vision, depth perception and ability to adjust focus.

    WORK ENVIRONMENT: The work environment is that of a typical manufacturing facility with occasional exposure to dust, vapors, heat, cold and noise.


    EDUCATION:
    HSD/GED

    SHIFT:
    9/80
    7:00-4:30
     
    Job Number: 190040
    Job Location: Rochester, NY
    Rate: Up to $16.00 DOE
    Duration: 12 months
    Input Date: 03/16/2021
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Cody Reposa
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: creposa@chiptonross.com
    Website: www.chiptonross.com

    Electrical Design & Analysis Engineer

    Description:
    MUST BE US PERSONS - REMOTE WORK IS AN OPTION
    DESIRED EXPERIENCE:
    • VHDL,
    • Xilinx FPGA’s
    • System Verilog
    • UVM
    • FPGA On Target Testing (OTT)
    • DO-254
    • MIL-STD-882E
    • MIL-HDBK-516C
    • Bachelor’s Degree with 5+ years of experience

    INTERVIEW PROCESS:

    The manager is looking to schedule interviews as soon as possible. These will be phone interviews with the Chief Firmware Engineer and the Engineer Manager where they will primarily discuss the candidates experience with VHDL, developing DO-254 processes and experience with On Target Testing.

    JOB DESCRIPTION
    Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

    Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for Xilinx FPGA based firmware systems. Leads development of code and integration of complex firmware components into a fully functional system. Develops firmware verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure firmware system requirements are met. Provides technical leadership for firmware projects. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads firmware research and development projects. Serves as a subject matter expert for firmware domains, system-specific issues, processes and regulations. Tracks and evaluates firmware team performance to ensure product and process conformance to project plans and industry standards. Trains and mentors others. Works under consultative direction.

    This will be a 12 month assignment on a team of 30 where they will be developing requirements, code, and test procedures for safety critical avionics. This opening is open to virtual candidates, as the person selected for this role will not be required to sit on-site.

    TSC LLC is an AA/EOE
     
    Job Location: Hazelwood OR Remote, MO
    Rate: $60-73/hr
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 Months+
    Start Date: ASAP
    Input Date: 04/07/2021
    Last Updated: 06/11/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: ChrisSheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    • Client is seeking a Circuit and FPGA Design Electrical Engineer with experience in PCB design to join our team.
    In this position the engineer will design and develop complex electronic hardware systems for aircraft.
    • A major focus of this mission critical engineering role will involve developing aircraft electronic systems.
    • The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team.
    • Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.
    • The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

    Basic Qualifications:
    • A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
    • Experience with circuit design concepts
    • Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
    • Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
    • Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programming.
    • The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
    • The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

    Desired Skills:
    • Experienced using Xilinx and/or Microsemi FPGAs
    • Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
    • Experience with Perl, Visual Basic, and C/C++,
    • DO 178C/254 verification
    • High Speed and RF design
    • Cadence schematic capture, PCB layout Allegro

    Comments:
    Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
     
    Job Number: CJH-5484-1
    Job Location: Fort Worth, TX
    Rate: $65
    Per Diem: Split
    Overtime: YES
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 04/20/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    Electrical Designer

    Description:
    Plan, layout, and revise detailed electrical schematics and system diagrams utilizing AutoCAD; SolidWorks Electrical experience a plus

    Contact our Engineering Recruiter to learn more the this position and many more!
     
    Job Location: Texas
    Input Date: 04/27/2021
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/234-9553
    Email: gcpjobs@teamglobal.com
    Website: www.teamglobal.com

    Electrical Engineer

    Description:
    PDS Tech working with a local DOD company seeking a qualified Electrical Engineer for its Hypersonics line of business in Huntsville, AL for a Contract to Direct Opportunity! 

    The successful candidate will serve as an Electrical Engineer with duties that span design of both hardware and software, test equipment, supporting manufacturing activities, and working with sub-contractors/suppliers on electrical aspects of Hypersonic Glide Bodies (HGB). Specific duties may encompass analog/digital circuit design, working with software running on a real-time operating system, utilizing LabVIEW on test equipment and/or supporting design for hardware-in-the-loop (HWIL) equipment. Work will be conducted in an integration/production facility along with a laboratory environment.


    Basic Qualifications:

    • A Bachelor’s degree in Electrical Engineering or Computer Engineering, Physics, EE Technology from an ABET accredited school is required. No Mechanical or Aerospace degrees
    • Candidate should have at least 5 years of relevant experience.
    • Circuit design experience – analog, digital, power
    • Experience with electrical schematics and cable diagrams
    • Experience with support equipment activities both electrical and mechanical
    • A foundational understanding of ESD, FOD, and acceptance testing


    Nice to Have:

    • Software skills – C, MATLAB, Simulink
    • Real-time Operating System – Speedgoat or similar
    • LabVIEW
    • Experience with Mentor Graphics DxDesigner, Altium, OrCAD, or similar


    Candidate must be a resident of the North Alabama area or willing to relocate to the Huntsville - North Alabama, AL area.

     
    Job Number: 2110123369
    Job Location: Huntsville, AL
    Duration: 6 months
    Input Date: 02/02/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PNRkQAO&URLSource=cjhunter

    Electrical Engineer

    Description:
    PDS Tech, Inc. is seeking an Electrical Engineer in Cupertino, CA-


    Job Description: 
    • Determine component requirements, and develop / review schematic designs for innovative camera module related circuits containing digital image sensors, microcontrollers, low-noise power supplies, and high-speed serial interfaces.
    • Work with vendors / cross functional teams for developing camera module circuits to ensure correct operation over the specified voltage and temperature ranges.
    • Schematics / Layout design for Flex / Rigid / Rigid-Flex fab assemblies and substrate.
    • Review layout, DFM and design reports to sign off on fab / board /substrate build activity.
    • Bringup FPGA based boards and do EE validation testing.
    • Analyze Camera module performance and noise data and create appropriate documentation for sharing info with boarder team.
    • Debug EE issues, including power quality, high-speed signal integrity and I2C interface performance.

    Key Qualifications: 
    • 5+ years relevant experience Expertise in electronic design, including component selection, schematic design, and schematic capture and layout tools.
    • Extensive experience with EE design for digital circuits, including high-speed video interfaces and low-speed serial control interfaces.
    • Strong knowledge of EE design and layout for low-noise linear and switching power supply circuits, and high speed multi-gigabit serial interfaces.
    • Knowledge of layout strategies for EMI minimization, signal integrity and low noise.
    • Comfort and ability to apply broad knowledge of engineering concepts (device behavior, data analysis, and systems modeling).
    • Knowledge of Scripting languages (Python).
    • Knowledge of FPGA based boards designs, FPGA programming.
    • Ability to run many projects and project types.
    • Proven ability to diagnose and tackle performance problems.
    • Great interpersonal skills - ability to collaborate across globally diverse groups.
    • Excellent process development and documentation skills.


    Education: 

    • BS/MS in a relevant field (EE)


    Additional Requirements: 

    • Experience with Cadence Schematics/layout tools. Familiarity with substrate design is a plus. Familiarity with camera and optics technology, CMOS image sensors interfaces (MIPI / DP) is a plus. Familiarity with micro-controller and data analysis / graphing using Matlab or JMP. Proficient verbal and written English language skills. Additional languages are a plus.

     
    Job Number: 2110128541
    Job Location: Cupertino, CA
    Duration: 12 months
    Input Date: 04/02/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Peter Pham
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PeY7QAK&URLSource=cjhunter

    Electrical Engineer

    Description:
    Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

    RESPONSIBILITIES:
    Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

    REQUIRED EXPERIENCE:
    Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

    ADDITIONAL EXPERIENCE:
    It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

    EDUCATION:
    Bachelor's of Electrical Engineering

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 155942
    Job Location: Avondale, LA
    Rate: $42 to $46.00 DOE
    Duration: 1 year
    Input Date: 11/14/2020
    Last Updated: 06/12/2021
    Firm Name: CHIPTON ROSS
    Attention: Andrew Craft
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: acraft@chiptonross.com
    Website: www.chiptonross.com

    Electrical Engineer

    Description:
    PDS Tech is seeking Electrical Engineers for a new program in Augusta, GA. 
    • Design and develop various electrical systems including motors, electronic control units, switches, relays, wire harnesses, electronic displays, and lighting.
    • Develop component and assembly level engineering drawings.
    • Lead design and documentation of vehicle electrical architecture including service manuals or part books.
    • Review existing supplier designs for quality and cost to eliminate potential quality issues and identify potential cost savings.
    • Perform and document electrical load analysis of complete vehicle electrical systems.
    • Review and create functional specifications and engineering design standards.
    • Develop cutting edge features and controls systems.
    • Manage component and system-level validation testing and conduct DFMEA to create test and analysis plans for product validation.
    • Work with outside suppliers to develop new technologies and cost reductions for electrical and electronic systems.
    • Develop and manage project schedules and budget to meet project requirements.
    • Mentor new engineers in electrical design theories and methods.


     
    • Education: Bachelor’s degree in electrical engineering required
    • Years of Experience: 4 or more years of experience required
    • Software Knowledge: Matlab, Microsoft Office applications, UG/ CAD/ Teamcenter, Parker IQAN, J1939 Familiarity

     
    Job Number: 2110126377
    Job Location: Augusta, GA
    Duration: 12 months
    Input Date: 03/17/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Janet Rauseo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PY9YQAW&URLSource=cjhunter

    Eng. Contractor 4 - Electrical Engineer, Completions

    Description:
    Inconen is looking for an Eng. Contractor 4 - Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    1) Catia V5 experiences a preference.
    2) 14 CFR 25 Subpart H - EWIS based design experience a must.
    3) Completions electrical system design experience preferred.
    4) Part 25 Certification experience for cabin interiors preferred.
    5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    6) Experience with power distribution, lighting, switching, and harness routing required.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.
    9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
    10) Makes technical decisions and provides recommendations demonstrating leadership authority.
    11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
    12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
    13) Develops standards and guides for diverse engineering activities.
    14) Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12828
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/25/2021
    Last Updated: 06/09/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Electrical Engineer - ECU and LRU Design

    Description:
    ABOUT THE JOB:
    Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

    REQUIRED SKILLS:
    • Bachelor’s degree in Electrical Engineering
    • 5+ years Aerospace circuit design experience
    • Control systems and/or supporting component hardware design experience
    • Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
    • Experience developing hardware requirements from system requirements and managing those requirements
    • Engines/Propulsion, APU, or Flight Controls experience
    • Schematic capture
    • In-depth circuit analysis and simulation
    • DOORS proficiency
    • Effective communication skills (both verbal and written)
    • Self-motivated, accountable, detail-oriented

    PREFERRED SKILLS:
    • Engine ECU and LRU familiarity

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: TBD
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 06/09/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Email: RTC-TalentMgmt@Real-Time-Consulting.com
    Website: www.real-time-consulting.com

    Electrical Engineer - Sr Electrical Engineer2

    Description:
    PDS Tech, Inc. is seeking an Electrical Engineer - Sr

    Job Description:

    Primary Duties and Responsibilities:

    · Design digital and analog electronic circuits for commercial and military Head Up & Helmet Mounted Displays and avionics sensors

    · Define electrical requirements for new designs and develop detailed performance specifications.

    · Perform preliminary design activities-including block diagrams, trade off studies and design reviews.

    · Perform detailed design activities - including schematic capture, design analysis, prototype tests, and design reviews.

    · Perform technical oversight and coordination of Printed Circuit Board designs.

    · Perform functional tests and design verification tests.

    · Develop equipment to support integration test

    · Define production test requirements
    Qualifications:

    · Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

    · Experience in Analog and Digital printed circuit board design and troubleshooting

    · US Citizenship or Permanent Resident (Green Card) is required

    · FPGA design and verification skills preferred
     
    Job Number: 2110124568
    Job Location: Wilsonville, OR
    Duration: 24 months
    Input Date: 02/04/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Jason Andrzejewski
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PSKbQAO&URLSource=cjhunter

    Electrical Engineer - Test Facility

    Description:
    ABOUT THE JOB:
    Primary job focus is design and risk mitigation of gas turbine propulsion test systems of all types and sizes, from complete test facilities to individual test benches.

    REQUIRED SKILLS:
    • Bachelor of Science degree in Electrical or Mechanical Engineering.
    • Minimum 5 years of Electrical Engineering experience.
    • Minimum 2 years of Electrical drawing experience, AutoCad or AutoCad Electrical with an ability to review drawings, catch errors and provide corrective feedback on designs.
    • Minimum 2 years of PLC ladder logic programming experience with experience with PLC hardware and HMI user interface screens.
    • An understanding of mechanical systems, such as valves, load banks, and dynamometers.
    • Ability to write Facility Control Software, solving software communication issues, designing HUE driven user screens and reducing maintenance costs through effective software architecture.
    • Experience with 3-phase power and its distribution in a test facility.
    • Ability to manage time, supplies, personnel, and budget to meet challenging deadlines.
    • Skilled at creating accurate cost estimates and schedules for test system designs.
    • Willing to work with vendors to size and select hardware.
    • A skilled leader, a great listener, and someone who exercises creative thinking when designing new systems or applying innovative methods to repair existing ones.

    PREFERRED SKILLS:
    • Experience in the Aerospace Industry mechanical testing environment with oversight responsibilities.

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: 12-18 months
    Start Date: ASAP
    Input Date: 05/27/2021
    Last Updated: 06/09/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Email: RTC-TalentMgmt@Real-Time-Consulting.com
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer 4

    Description:
    An Electrical Engineer 4 role located in Kirkland, WA is currently available through Belcan. The Electrical Engineer 4 will Perform the engineering development and associated support of contracted programs, Bid and Proposals and Internal Research and Development activities. Assist in new business development and follow on activities. This is a senior job level requiring leadership, strong technical skills, mentoring skills and good presentation skills. Having wide-ranging experience, uses professional concepts and company objectives to resolve complex issues. Independently applies a high degree of creative ability, engineering skill and judgment in applying engineering principles.

    Electrical Engineer 4 duties:

    * Contribute to and complete development projects on a mutually agreeable budget and schedule.
    * Conduct trade studies to determine optimum approach, develop new and improve existing
    technologies, recommend standard topologies for specific applications
    * Responsible for the technical aspects of design and development of power supplies and USB OUs
    for commercial aircraft.
    * Resolve technical problems with a high degree of analytical expertise and originality and drive
    problems to resolution.
    * Prepare and present analyses and technical rationales for your designs at internal and external
    reviews.
    * Experience in meeting DO-160, Boeing, and Airbus requirements and development and support
    of test procedures/reports
    * Experience using OrCAD, SPICE, and SABER software.
    * May provide EE team leadership on a product development or research project.

    EDUCATION AND EXPERIENCE REQUIRED:

    * Electrical engineering background with a BSEE degree.
    * Demonstrates proficiency in the essential functions of the role, typically obtained with 7 years of
    direct experience in power supply design.
    * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
    lawfully admitted into the U.S. as a refugee or granted asylum.
    * Switched mode power conversion product design and development with responsibility for taking a design from requirements through production is a must have experience

    If you are interested in this Electrical Engineer 4 role located in Kirkland, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age. wst160

     
    Job Number: 308767
    Job Location: Kirkland, WA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 01/23/2021
    Last Updated: 05/20/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer II

    Description:
    An Electrical Engineer II role located in Lynnwood, WA is currently available through Belcan. The Electrical Engineer II will work under minimal supervision and uses established procedures to perform and lead engineering duties in researching, planning, designing, and developing power conversion products for use in the Aerospace or Electronics marketplace. The Electrical Engineer II works on new product designs, modernization, and upgrades, as well as performs extensive analyses to ensure cost, quality, and customer requirements. The Electrical Engineer II also uses computer-assisted engineering and design software and equipment to perform daily assignments, applying principles of science and mathematics to develop economical and reliable solutions to technical problems.

    Electrical Engineer II job duties:

    * Produce thorough and accurate design and development work of suitable complexity that meets
    all customer specifications and company requirements for schedule, cost, producibility, quality,
    and reliability
    * Provide technical leadership for cross-functional project teams
    * Analyze design requirements and objectives, define optimum design criteria and approach, and
    design system or component elements
    * Initiate or direct functional, acceptance, qualification, or development testing on new or modified
    designs
    * Understand, decompose, and define product and process requirements to support product
    development, sustaining and R&D.
    * Generate and review product development documentation including proposals, technical reports,
    procedures, correspondence, etc. necessary to satisfy customer and program requirements.
    * Plan, estimate, prioritize, and manage work activities to support meeting project schedules and
    budgets.
    * Utilize proficient problem-solving processes, documentation, tools and analyses to quickly and
    effectively identify root cause and corrective actions to technical challenges and/or issue in
    support of product development and product sustaining assignments
    * Work effectively with all functional groups to achieve product performance and cost targets.
    Build quality and manufacturability into the design. Define/understand/comply with company
    and regulatory guidelines to assure a safe operating environment
    * Support continuous process improvement activities including Kaizen, 5S practices to ensure an
    organized and efficient working environment, and personal development.
    * Any other task assigned by supervisor or management

    EDUCATION AND EXPERIENCE REQUIRED:

    * BS Degree in Electrical Engineering. Masters or PhD preferred.
    * 2+ years of relevant work experience
    * Analog Circuit Design
    * Micro-Electronics Design
    * Magnetics Design
    * Experience with a variety of switching power conversion topologies
    * Control circuitry for PWM power topologies
    * Experience with SPICE circuit simulation tools (PSPICE, SIMPLIS, etc.)
    * Worst Case Circuit Analysis (WCCA), Electrical Stress / Derating and Design Failure Modes &
    Effects Analysis (DFMEA)
    * Power conversion product design for harsh radiation environments as experienced by spacecraft
    * Familiarity with hybrid (chip & wire) layout processes, methods, and deliverables
    * Space qualified, Mil-Spec, FAA and/or other highly regulated product design experience
    * Document Control / Product Data Management tools
    * Technical leadership experience
    * Project management experience
    * MUST be a US person

    If you are interested in this Electrical Engineer II role located in Lynnwood, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



     
    Job Number: 311404
    Job Location: Lynnwood, WA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/22/2021
    Last Updated: 06/09/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: FrancisOsolnick
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    Electrical Engineer III

    Description:
    An Electrical Engineer III role located in Lynnwood, WA is currently available through Belcan. The Administrative Assistant will work under minimal supervision and uses established procedures to perform and lead engineering duties in researching, planning, designing, and developing power conversion products for use in the Aerospace or Electronics marketplace. The Electrical Engineer III works on new product designs, modernization, and upgrades, as well as performs extensive analyses to ensure cost, quality, and customer requirements. The Electrical Engineer III also uses computer-assisted engineering and design software and equipment to perform daily assignments, applying principles of science and mathematics to develop economical and reliable solutions to technical problems.

    Electrical Engineer III job duties:

    * Produce thorough and accurate design and development work of suitable complexity that meets
    all customer specifications and company requirements for schedule, cost, producibility, quality,
    and reliability
    * Provide technical leadership for cross-functional project teams
    * Analyze design requirements and objectives, define optimum design criteria and approach, and
    design system or component elements
    * Initiate or direct functional, acceptance, qualification, or development testing on new or modified
    designs
    * Understand, decompose, and define product and process requirements to support product
    development, sustaining and R&D.
    * Generate and review product development documentation including proposals, technical reports,
    procedures, correspondence, etc. necessary to satisfy customer and program requirements.
    * Plan, estimate, prioritize, and manage work activities to support meeting project schedules and
    budgets.
    * Utilize proficient problem-solving processes, documentation, tools and analyses to quickly and
    effectively identify root cause and corrective actions to technical challenges and/or issue in
    support of product development and product sustaining assignments
    * Work effectively with all functional groups to achieve product performance and cost targets.
    Build quality and manufacturability into the design. Define/understand/comply with company
    and regulatory guidelines to assure a safe operating environment
    * Support continuous process improvement activities including Kaizen, 5S practices to ensure an
    organized and efficient working environment, and personal development.
    * Any other task assigned by supervisor or management

    EDUCATION AND EXPERIENCE REQUIRED:

    * BS Degree in Electrical Engineering. Masters or PhD preferred.
    * 5+ years of relevant work experience
    * Analog Circuit Design
    * Micro-Electronics Design
    * Magnetics Design
    * Experience with a variety of switching power conversion topologies
    * Control circuitry for PWM power topologies
    * Experience with SPICE circuit simulation tools (PSPICE, SIMPLIS, etc.)
    * Worst Case Circuit Analysis (WCCA), Electrical Stress / Derating and Design Failure Modes &
    Effects Analysis (DFMEA)
    * Power conversion product design for harsh radiation environments as experienced by spacecraft
    * Familiarity with hybrid (chip & wire) layout processes, methods, and deliverables
    * Space qualified, Mil-Spec, FAA and/or other highly regulated product design experience
    * Document Control / Product Data Management tools
    * Technical leadership experience
    * Project management experience
    * MUST be a US person

    If you are interested in this Electrical Engineer III role located in Lynnwood, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



     
    Job Number: 311406
    Job Location: Lynnwood, WA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/17/2021
    Last Updated: 06/12/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: FrancisOsolnick
    City, State: West Region
    Email: fosolnick@belcan.com
    Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=311406&job_number=311406

    Electrical Engineer IV

    Description:
    An Electrical Engineer IV role located in Lynnwood, WA is currently available through Belcan. The Electrical Engineer IV is a top contributor who needs little to no supervision and uses originality, ingenuity and established procedures to oversee and perform engineering duties in researching, planning, designing, and developing products for use in the Aerospace or Electronics marketplace. The Electrical Engineer IV works as a technical leader within a collaborative Integrated Product Team (IPT) environment while responsible for multiple independent tasks.

    Electrical Engineer IV job duties:

    * Provide technical leadership for cross-functional project teams
    * Generate and review product development documentation including proposals, technical reports, procedures, correspondence, etc. necessary to satisfy customer and program requirements
    * Work effectively with all functional groups to achieve product performance and cost targets. Build quality and manufacturability into the design. Define/understand/comply with company and regulatory guidelines to assure a safe operating environment
    * Plan, estimate, prioritize, and manage work activities to support meeting project schedules and
    budgets
    * Produce thorough and accurate design and development work of suitable complexity that meets
    all customer specifications and company requirements for schedule, cost, producibility, quality,
    and reliability
    * Analyze design requirements and objectives, define optimum design criteria and approach, and
    design system or component elements
    * Initiate or direct functional, acceptance, qualification, or development testing on new or modified
    designs
    * Understand, decompose, and define product and process requirements to support product
    development, sustaining and R&D
    * Utilize proficient problem-solving processes, documentation, tools and analyses to quickly and
    effectively identify root cause and corrective actions to technical challenges and/or issue in
    support of product development and product sustaining assignments
    * Support continuous process improvement activities including Kaizen, 5S practices to ensure an
    organized and efficient working environment, and personal development.
    * Any other task assigned by supervisor or management

    EDUCATION AND EXPERIENCE REQUIRED

    * BS Degree in Electrical Engineering. Masters or PhD preferred
    * 10+ years of relevant work experience
    * Analog Circuit Design
    * Micro-Electronics Design
    * Magnetics Design
    * Experience with a variety of switching power conversion topologies
    * Control circuitry for PWM power topologies
    * Experience with SPICE circuit simulation tools (PSPICE, SIMPLIS, etc.)
    * Worst Case Circuit Analysis (WCCA), Electrical Stress / Derating and Design Failure Modes &
    Effects Analysis (DFMEA)
    * Power conversion product design for harsh radiation environments as experienced by spacecraft
    * Familiarity with hybrid (chip & wire) layout processes, methods, and deliverables
    * Space qualified, Mil-Spec, FAA and/or other highly regulated product design experience
    * Proficiency with verbal and written English for technical reports, presentations, analyses, or
    other communications at the appropriate level throughout the organization
    * Self-directed and motivated while working and communicating effectively within a team
    environment that consists of several engineering, operations, quality, and business disciplines.
    * Technical leadership experience
    * Project management experience
    * Document Control / Product Data Management tools
    * Must be a US Person

    If you are interested in this Electrical Engineer IV role located in Lynnwood, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



     
    Job Number: 311407
    Job Location: Lynnwood, WA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/16/2021
    Last Updated: 06/12/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: FrancisOsolnick
    City, State: West Region
    Email: fosolnick@belcan.com
    Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=311407&job_number=311407

    Electrical Engineers

    Description:
    Vehicle systems integration
     
    Job Location: OH/MI/IN
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: jmac@advancedtechno.com
    Website: www.advancedtechno.com

    Electrical Harness Installation Eng/Secondary Structure (10 needed)

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Unique Skills:
    • Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    • Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    • Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical workbench is necessary
    • Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects .
    • Provides specialized technical assistance to team members.
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
    • Determines and develops own approach to solutions within schedule and cost objectives .
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
    • Acts as liaison with representatives outside of the assigned group/area .

    Additional Functions:
    • Actively works to improve daily processes and ensures all work meets customer requirements .
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
    • Perform other duties as assigned.
     
    Job Number: 24-523
    Job Location: Savannah, GA
    Rate: $66-70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/02/2021
    Last Updated: 06/10/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Eng/Secondary Structures

    Description:
    Required Unique skills: Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical workbench is necessary
    • Knowledge of Catia V5 Sheetmetal workbench is necessary

    Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 21-167267
    Job Location: GA
    Rate: $66.00 - $70.00 per hour
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/03/2021
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Electrical Harness Installation Engineer - Secondary Structures

    Description:
    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides
    specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide
    technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule
    and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and
    consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
    Unique skills: Required Unique skills: Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical workbench is necessary
    • Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
     
    Job Number: 374757
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 05/03/2021
    Last Updated: 06/12/2021
    Firm Name: CTS INTERNATIONAL
    Address: 160 NW GILMAN BLVD STE 250
    City, State: ISSAQUAH, WA 98027
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Harness Installation Engineer /Secondary Structures

    Description:
    Contract - Electrical Harness Installation Engineer/Secondary Structures - Req# 164387 in GAC Savannah
    Required Unique skills: Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical workbench is necessary
    • Knowledge of Catia V5 Sheetmetal workbench is necessary

    Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects .
    2. Provides specialized technical assistance to team members .
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
    4. Determines and develops own approach to solutions within schedule and cost objectives .
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
    6. Acts as liaison with representatives outside of the assigned group/area.
    Need answers to these questions for submittal to Gulfstream:
    1 Why are you looking for work?_______________________
    2 Are you a US Citizen ? __________________
    3 Include updated resume with months and years on dates ________________________
    4 Do you have any prior military experience? (Can you produce a DD-214?) ___________________
    5 What is your highest level of completed education? ____________________________
    6 W-2 Hourly Pay Rate request? ___________________________
    7 Are you a prior Gulfstream contractor? ________________________
    8 Are you able to work on site at client’s location in Savannah, GA on your own? _____________________
    ========
    If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
    call Peggy at 774-210-4108 Referrals appreciated!!
     
    Job Number: PL Elec Harness
    Job Location: Savannah, GA
    Rate: 70/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2-3 weeks
    Input Date: 03/15/2021
    Last Updated: 06/11/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    Electrical Harness Installation Engineer/Secondary Structures

    Description:
    Inconen is looking for a Electrical Harness Installation Engineer/Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

    Unique skills:
    1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    5. Aerospace Experience is required
    6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    8. Knowledge of Catia V5 Electrical workbench is necessary
    9. Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15220
    Job Location: Savannah, GA
    Rate: $66.00 - $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/03/2021
    Last Updated: 06/09/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Power Design Engineer

    Description:
    The Electrical Power Design Engineer will have significant experience as a Power Design role on design teams and design architectures for low and high-power supplies, motor drives, and power management systems.
    • Moog Aircraft Power Design Engineers require not only state of the art electronics design know-how but also experience designing for requirements such as: high shock and vibration, thermal management with extreme external temperature variation, high voltage, altitude variation, failure mode mitigation and arc threat management, minimized weight, robust packaging, long life and a low recurring cost.
    • Responsible for not only the technical solution but also meeting recurring and non-recurring cost targets.
    • This role will be interacting not only with the design engineering team, but other disciplines such as program management, system engineering, actuation engineering, safety and reliability, product engineering and others. Leadership skills are a must.
    Bachelors of Science Degree in Electrical Engineering
    • Master's Degree in Electrical Engineering or related technical field is preferred
    • 8+ years of relevant experience in a design environment is required
    • Experience designing custom low and high-power supplies and filters.
    • Experience designing custom power drive electronics (exceeding 10kW).
    • Experience designing custom magnetics.
    • Familiarity / Experience with conducted emissions and susceptibility
    • A military/aerospace background and familiarity with the design life cycle including design, qualification and certification of electronics for aircraft applications is desired.
    • The position may require a low amount of domestic travel (up to 3 times per year)
     
    Job Number: 82872
    Job Location: East Aurora, NY
    Rate: 60.00
    Per Diem: NO
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: TWO ROADS PROFESSIONAL RESOURCES INC
    Attention: Kristan Anderson
    Address: 5122 BOLSA AVE STE 112
    City, State: HUNTINGTON BEACH, CA 92649
    Phone: 714/901-3804
    Fax Phone: 714/901-3814
    Website: www.2roads.com

    Electrical Systems Design Engineer 4

    Description:
    **Ability to obtain a Secret Clearance Required**

    Leads work with customers to develop and document complex electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

    The Avionics/Electrical Ground Support Systems team in St. Louis MO is seeking a talented EE System Design Engineer to fill a position in Ground Support Equipment in support of F-15, F-18, T-X, T-45, P-8 and MQ-25 platforms. This design position requires skills and experience to manage total design, development, procurement, manufacturing and test of all Ground Support Equipment.

    Position Responsibilities:
    •Development and documentation of electrical subsystems and packaging of electronics
    •Assist with monitoring supplier and manufacturing performance
    •Support system integration and requirement verification
    •Performing system qualification tests to verify operational and functional requirements
    •Exercises critical thinking and innovative problem solving
    Basic Qualifications (Required Skills/Experience):
    •Experience designing, documenting, and implementing electrical systems
    •Support internal, informal peer reviews and formal design reviews with USAF and USN customers, as needed
    •Software integration experience
    •Strong communication and interpersonal skills
    •Assist in informal and formal testing of support equipment, including aircraft and/or component physical and functional interface, as needed
    •Work under general direction and in collaboration with other engineers, designers and support staff
    •Proven track record of planning and status of work, and to leading a small team
    •Provide technical leadership across many programs

    Preferred Qualifications (Desired Skills/Experience):
    •Bachelor's degree or higher
    •Experience working with cross-functional teams
    •Ability to work flexible hours and occasional overtime
    •Earned Value Management experience is a plus.
     
    Job Number: 374693
    Job Location: Berkeley, MO
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 04/06/2021
    Last Updated: 06/12/2021
    Firm Name: CTS INTERNATIONAL
    Address: 160 NW GILMAN BLVD STE 250
    City, State: ISSAQUAH, WA 98027
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Design Engineers - All Levels

    Description:
    •Development and documentation of electrical subsystems and packaging of electronics
    •Assist with monitoring supplier and manufacturing performance
    •Support system integration and requirement verification
    •Performing system qualification tests to verify operational and functional requirements
    This design position requires skills and experience to manage total design, development, procurement, manufacturing and test of all Ground Support Equipment.

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: Bo-MO- Elec. Systems
    Job Location: St. Louis, MO
    Rate: $70.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Long term
    Start Date: ASAP
    Input Date: 04/27/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Technician

    Description:
    • Active Secret Clearance Required
    • 1 week training at Palmdale, CA prior to going to Beale AFB
    • Rental car will be shared 2 people per car
    • Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
    • Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.
    • Operates related equipment; conducts tests and reports data in prescribed format.
    • Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
    Skill Matrix:
    U-2 Yes 1 2 - 4 Years
    Wiring Harness Design No 1 4 - 6 Years
    Electronics Yes 1 6+ Years
     
    Job Number: CJH-5537
    Job Location: Beale AFB, CA
    Rate: 32.64
    Per Diem: YES
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 04/29/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    Electrical Technician - Test Facility

    Description:
    ABOUT THE JOB:
    This position is part of a team that supports testing highly complex turbine engine products. The Electrical Technician is responsible for fabricating, maintaining, and testing electrical systems and components to support the development and certification of gas turbine aircraft propulsion engines.

    REQUIRED SKILLS:
    • Associate in Science degree in Electrical Technology or equivalent experience.
    • Minimum 7 years of Electrical Technician experience.
    • Ability to read and interpret electrical drawings.
    • Experience working from layout drawings, wire lists and schematics.
    • Experience with fitout from utility and control system drops to motors, pumps, actuators, etc.
    • Experience with 3-phase power and its distribution in a test facility.
    • Experience in testing, troubleshooting and repairing electrical equipment.
    • Experience with ordering components used in fabrication of wire harnesses, interface (Bud) boxes, etc.
    • Experience fabricating wire harnesses.
    • Experience installing wire harnesses for wiring control systems / PLCs to peripheral devices such as temperature sensors, speed sensors, actuators, etc.
    • Experience fabricating interface boxes for signal breakout, signal interconnection, etc.

    PREFERRED SKILLS:
    • Experience in the Aerospace Industry mechanical testing environment.
    • Experience with AutoCad or AutoCad Electrical.
    • An understanding of mechanical systems, such as valves, load banks, and dynamometers.

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: 12-18 months
    Start Date: ASAP
    Input Date: 05/27/2021
    Last Updated: 06/09/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Email: RTC-TalentMgmt@Real-Time-Consulting.com
    Website: www.real-time-consulting.com

    Electrical Test Engineer

    Description:
     
    PDS Tech, Inc. is seeking an Electrical Test Engineer in Vergennes, VT

    Description:    
    Engineering Lab Technician

    •  Development, coordination and conducting of technical reliability studies and evaluation of engineering design concepts and understands and can develop and analyze, reliability test plans. .
    • Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
    • Compilation and analysis of performance reports.


    Prerequisites:
    Education:    

    • AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience.



    Additional Job Details:    

    • Provides technical support to engineers on a variety of tasks.
    • Plans and executes experiments and gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes to support engineering disciplines.
    • Analyzes, maintains, compiles and formats data and design changes.
    • Produces drawings, reports and engineering documentation.
    • Performs research and engineering laboratory functions involving the layout, building, testing, troubleshooting, repairing and modification or electronic or electro-mechanical devices, assemblies, subsystems, and systems.

    Typical tasks include:

    •  Circuit Card Assembly rework
    •  Wiring of electrical assemblies
    • Test electrical cable assembly and repair
    •  Thru hole and surface mount soldering
    • Use of basic electrical test equipment
    • Ocilloscopes, multi-meters, power supplies


     
    Job Number: 2110123440
    Job Location: Vergennes, VT
    Duration: 4 months
    Input Date: 01/12/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mike Flanery
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003POCRQA4&URLSource=cjhunter

    Electrician

    Description:
    PDS Tech is seeking an Electrician in Salt Lake City, UT

    Duties:
    Maintain and repair equipment in Titanium sponge plant.
    Work safely and obey safety standards, participate in safety observation program.
    Follow daily maintenance schedule.
    Plan out electrical jobs and get information on parts.
    Perform preventative maintenance on plant equipment and instrumentation. 
    Troubleshoot Electrical equipment, PLC’s, valves and solenoids and other equipment as needed.
    Install new electrical equipment as needed.
    Assist maintenance mechanic with maintenance task and life critical permits.
    Possible On call during evening hours for emergency repairs.
     


    Requires a high school diploma or its equivalent with 2-4 years of experience in the field or in a related area. May have to complete an apprenticeship and/or formal training in area of specialty. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
     
    Job Number: 2010111324
    Job Location: Salt Lake City, UT
    Duration: 3 months
    Input Date: 11/14/2020
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Patrick Mahoney
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fhRVQAY&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro Mechanical Systems Engineer

    Description:
    We have an outstanding Contract position for an Electro Mechanical Systems Engineer to join a leading Company located in the Baltimore, MD surrounding area.

    Job Responsibilities:
    Provide electro-mechanism system engineering support for the development of an Electro-Mechanical Actuation System including, but not be limited to, performing concept trades, concept design, and detailed design of mechanisms systems and their components for moving and dynamic applications.
    Provide oversight for fabrication, assembly, and testing services, including life testing in the development
    of prototypes, and flight electromechanical systems.
    Specific deliverables include; system requirements/specification documents, concept trade studies,
    concept and detailed design, test plans, and execution oversight.

    Top Skills Details:
    Strong Mechanisms experience on aerospace actuation hardware or other similar high-reliability experience.
    Electromechanical experience - small electric driven motor systems, actuators, precision motion control, etc.
    Experience with systems-level oversight of hardware development.
    Knowledge of software and electrical interfacing design

    Additional Skills & Qualifications:
    Experience with systems requiring precision motion is required and systems utilizing electromechanical or other means for actuation, and sensors for detecting velocity, position, or other physical parameters, along with a closed-loop or open-loop feedback controller.
    Experience with electromechanical systems in severe environments where systems are subjected to harsh acoustic, EMI/EMC, and vibration environments is preferred.
    Experience in setting up and operating electronic design and test equipment and the testing.
    Experience working on the aerospace industry, DoD in design, assembly, integration, and test programs is preferred.
    US Citizenship
     
    Job Number: 45614
    Job Location: Baltimore, MD
    Overtime: Possible
    Duration: 6 mos.
    Start Date: ASAP
    Input Date: 04/27/2021
    Last Updated: 05/17/2021
    Firm Name: TAD PGS INC
    Attention: Kim Silcott
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 657/250-1893
    800 Phone: 800/261-3779
    Website: www.tadpgs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro-Mechanical Assembler

    Description:
    Ability to read detailed blueprints, schematics, wiring diagrams, and follow both written and verbal instructions

    Soldering J Standard

    Assembles and reworks electronic and electro-mechanical precision assemblies and subassemblies. Works with micro-switches, uses oscilloscope, power supplies, and performs electrical testing
     
    Job Number: 82886
    Job Location: Fullerton, CA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: 6 Month+
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: TWO ROADS PROFESSIONAL RESOURCES INC
    Attention: Roby Lane
    Address: 5122 BOLSA AVE STE 112
    City, State: HUNTINGTON BEACH, CA 92649
    Phone: 714/901-3804
    Fax Phone: 714/901-3814
    Website: www.2roads.com

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

    In your role, you will:
    • Assemble fabricated aircraft parts at floor stations.
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
    Qualifications:
    • Fine pitch soldering experience is required. (watch maker certifications)
    • 4 years experience in electronics assembly.
    • High School Diploma required.
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
     
     
    Job Number: 1810083538
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 11/14/2020
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer

    Description:
    Description:

    Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.

    • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.

    • Perform formal software development through design for requirements and requirements verification with C/C++ code and Math Works toolsets

    • Develop and update requirements and verification traceability

    • Conduct software integration and testing on target hardware

    • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results

    • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment

    • Participation in development of subsystems architecture, redundancy management



    Education Requirements:

    • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.

    • Master’s Degree in the Engineering disciplines mentioned above is suggested



    Position Requirements:

    • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in flight controls and/or avionics, embedded software development, and testing.

    • Experience with DO-178 Level A software or other embedded software development and testing is required.

    • Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems

    • Experience with software Configuration Management

    • Experience with Primary Development Environment:

    Math Works MATLAB / Simulink

    C/C++ code

    C# test scripts

    Serena Dimensions / PVCS

    Embedded Software Development environments
     
    Job Number: 35254
    Job Location: Ft. Worth, TX
    Input Date: 04/28/2021
    Firm Name: BRAVOTECH
    Attention: Sandy Singh
    Address: 4835 LBJ FWY STE 1000
    City, State: DALLAS, TX 75244
    Phone: 972/419-1600
    Website: www.bravotech.com

    Embedded Software Engineer (Flight Controls)

    Description:
    804 Technology is currently looking for an Embedded Software Engineer (Must have Flight Controls Experience) for a long term contract job opportunity located in Fort Worth TX. The Embedded Software Engineer will design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254. System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification. Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

    Pay: $70-75/hour based on experience and Per Diem is available to those that qualify.
    Location: Fort Worth TX 76118

    Thank you in advance for your time.

    Brian Smith
    314-753-5299
    bsmith@804technology.com
    Description
    • Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
    • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
    • Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
    • Develop and update requirements and verification traceability
    • Conduct software integration and testing on target hardware
    • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
    • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
    • Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

    Education Requirements:
    • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
    • Master’s Degree in the Engineering disciplines mentioned above is suggested

    Position Requirements:
    • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
    • Experience with DO-178 Level A software or other embedded software development and testing is required.
    • Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
    • Experience with Primary Development Environment:
    • MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
    o C/CC++ code
    o C# test scripts
    o Serena Dimensions / PVCS
    Embedded Software Development environments

    I am currently working remotely. You can reach me in a variety of ways:
    Be safe and stay healthy out there. We are in this together!

    Brian Smith
    Email: bsmith@804technology.com
    Cell: 314-753-5299
    Business: 636-928-0330 (forward message to my email)
    Fax: 636-928-0348

    Brian Smith
    804 Technology
    Recruiting Director
    O. 636-928-0330
    F. 636-928-0348
    C. 314-753-5299
    bsmith@804technology.com
    www.804technology.com

    804 Technology is an equal opportunity employer.
    All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
     
    Job Number: Embedded Soft 804
    Job Location: Fort Worth, TX
    Rate: $70-75/hour
    Per Diem: Split
    Overtime: yes
    Duration: 9 mos plus
    Start Date: ASAP
    Input Date: 06/11/2021
    Firm Name: 804 TECHNOLOGY
    Attention: Brian Smith
    Address: 5381 HIGHWAY N STE 201
    City, State: COTTLEVILLE, MO 63304
    Phone: 636/928-0330
    Fax Phone: 636/530-3693
    Email: bsmith@804technology.com
    Website: www.804technology.com

    Embedded System Electronics Technician

    Description:
    PDS Tech, Inc. is seeking an Embedded System Electronics Technician, in Salem, OR.

    Summary:
    • Participate in the transition of new products into production.
    • Participate in project team meetings provides accurate status and raising issues and risks.
    • Develop and perform test procedures with necessary fixtures to ensure that products are performing according to specifications.
    • Test procedure generation. Determine the testing protocol for design and prototype validation as well as final product acceptance testing.
    • Assist with prototypes and engineering builds (hands on capability required).
    • Provide manufacturing support as part of a cross functional development team
    • Operate all types of electrical and mechanical test equipment and tools (oscilloscopes, generators, logic analyzers, force and strain gauges, etc.) for design verification and engineering activities
    • Compile/validate documentation packages from Engineering/Mfg Engineering teams and provide maintenance of controlled electronic documents, specs, forms, etc.
    • Consistent and accurate data entry of items, Bills of Materials, ECO’s, Costing, Pricing, and Item Master maintenance into Oracle
    • Coordinate and track the routing and processing of applicable documents
    • Create reports from Oracle for engineering BOMs
    • Creates and updates Engineering Documentation guidelines
    • Assists engineers in NPD or sustaining engineering activities    

    Additional Job Details:    
    • At least 5 years of experience deploying embedded system electronics.
    • Demonstrated experience with CAD tools for electrical and mechanical design and simulation.
    • Excellent problem solving skills 1 year experience working with engineering related documentation, specifications, ERP systems, PLM tools, or documentation repositories
    • Demonstrated experience with document configuration management
    • Demonstrated experience with building BOM and entry into ERP system
    • Demonstrated experience with ECO and engineering release processes
    • Detailed, methodical, accurate in written documentation Work well in a team, but can work effectively independently
    • Strong written and verbal communication skills Demonstrated experience with Windows operating systems and office applications

    Education:    

    • Associates Degree

     
    Job Number: 2110129350
    Job Location: Salem, OR
    Duration: 12 months
    Input Date: 04/20/2021
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sherrita Davis
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PgvKQAS&URLSource=cjhunter

    Eng. Contractor 3: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15036
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 06/09/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Eng. Contractor 4: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15037
    Job Location: Savannah, GA
    Rate: $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 06/09/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Engineer II

    Description:
    Job description




    Engineer II – Electrical Power Systems (Clearance Required)



    This position is for an experienced spacecraft power system engineer who can support a team through the design phase, perform analysis, support the production phase, support the test phase and support the operation phase for a spacecraft power subsystem. 



    What You’ll Do



    • Support the development of power systems architectures (power generation, power storage and power distribution and control), requirements, power system concepts and power simulations.
    • Be a team member for a spacecraft bus or space vehicle.
    • Analyze power system sizing and performance.
    • Support hardware development teams.
    • Support integration and test, and launch and operations.
    • Support subcontract management.
    • Maintain a regular and predictable work schedule.
    • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
    • Perform other duties as necessary.


    What You’ll Need



    • BS degree or higher in Engineering or a related technical field is required plus 5 or more years related experience.
    • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
    • A current Top Secret/SCI security clearance is required.
    • Minimum of 3 years direct experience in spacecraft Electrical Power Subsystem Engineering or Electrical Power Test or Electrical Power Spacecraft Operations.
    • A desire to learn - our culture fosters intellectual curiosity.
    • A strong technical foundation – people who flourish behave like owners
    • Detailed knowledge or classroom work relating to the following is highly desired:  Lithium Ion batteries, solar arrays, power control, power conversion/regulation, power distribution, charge control methods, high voltage (>100V), direct energy transfer architectures, regulated power system architectures and power fault protection.
    • Experience or awareness with power simulation tools is highly desirable (e.g., PSPICE, SABER, MATLAB, MMPAT).
    • Experience with defining, developing and delivering space qualified hardware is highly desired.
    • Strong oral, written, and presentation skills.
    • Effectiveness in small team work environment with broad responsibilities.
    • Capable of performing solar array, battery, power conversion/distribution sizing and performance analysis is highly desired.


    Working Conditions



    • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
    • May occasionally work in production work centers where use of protective equipment and gear is required.
    • May access other facilities in various weather conditions.
    • Travel and local commute between Ball campuses and other possible non-Ball locations may be required.  


    US CITIZENSHIP REQUIRED




    Job description




    Engineer II – Electrical Power Systems (Clearance Required)



    This position is for an experienced spacecraft power system engineer who can support a team through the design phase, perform analysis, support the production phase, support the test phase and support the operation phase for a spacecraft power subsystem. 



    What You’ll Do



    • Support the development of power systems architectures (power generation, power storage and power distribution and control), requirements, power system concepts and power simulations.
    • Be a team member for a spacecraft bus or space vehicle.
    • Analyze power system sizing and performance.
    • Support hardware development teams.
    • Support integration and test, and launch and operations.
    • Support subcontract management.
    • Maintain a regular and predictable work schedule.
    • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
    • Perform other duties as necessary.


    What You’ll Need



    • BS degree or higher in Engineering or a related technical field is required plus 5 or more years related experience.
    • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
    • A current Top Secret/SCI security clearance is required.
    • Minimum of 3 years direct experience in spacecraft Electrical Power Subsystem Engineering or Electrical Power Test or Electrical Power Spacecraft Operations.
    • A desire to learn - our culture fosters intellectual curiosity.
    • A strong technical foundation – people who flourish behave like owners
    • Detailed knowledge or classroom work relating to the following is highly desired:  Lithium Ion batteries, solar arrays, power control, power conversion/regulation, power distribution, charge control methods, high voltage (>100V), direct energy transfer architectures, regulated power system architectures and power fault protection.
    • Experience or awareness with power simulation tools is highly desirable (e.g., PSPICE, SABER, MATLAB, MMPAT).
    • Experience with defining, developing and delivering space qualified hardware is highly desired.
    • Strong oral, written, and presentation skills.
    • Effectiveness in small team work environment with broad responsibilities.
    • Capable of performing solar array, battery, power conversion/distribution sizing and performance analysis is highly desired.


    Working Conditions



    • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
    • May occasionally work in production work centers where use of protective equipment and gear is required.
    • May access other facilities in various weather conditions.
    • Travel and local commute between Ball campuses and other possible non-Ball locations may be required.  


    US CITIZENSHIP REQUIRED




     
    Job Number: 2010115068
    Job Location: Boulder, CO
    Duration: 100 months
    Input Date: 11/14/2020
    Last Updated: 06/11/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Patrick Mahoney
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OtGrQAK&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Technician III

    Description:
    An Engineering Technician job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You will also be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components
    meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience. This is a great opportunity with a growing company.

    Engineering Technician III Job duties:

    * Ability to read and understand mechanical and electrical drawings, diagrams, schematics
    and manuals
    * Ability to work with standard laboratory test equipment, other measurement equipment, hand
    tools, and power tools
    * Comfortable working in confined spaces
    * Experience in fabrication work to include metal, aluminum, composite, & plastics
    * Has working knowledge of cutting, drilling and repair work
    * Experience in two part compounds and bonding processes
    * Experience with overhead cranes, gantries and powered industrial equipment
    * Has mechanical assembly experience
    * Competency in the use of basic measuring tools (calipers, micrometers, height gages)
    * Computer literacy in MS Office Suite
    * Experience working in MRP
    * Extensive hand tool experience
    * Ability to read and follow complex written instructions

    Qualifications:
    * Associate's Degree in a related field of study and at least 4 years of relevant experience.
    * Previous experience and/or certifications within the aerospace and defense industry
    * Previous experience in a manufacturing environment
    * Experience with AutoCAD or other 3-D CAD software
    * The ability to obtain and maintain a Security Clearance may be required

    If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

     
    Job Number: 310524
    Job Location: Louisville, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 03/16/2021
    Last Updated: 06/09/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: IsabellaLardieri
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Technician III

    Description:
    An Engineering Technician III job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible for using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure systems and components meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience.

    Engineering Technician III Job duties:
    * Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
    * Completes parts lists, checks drawings in accordance with released engineering
    * Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
    * Assists as required during inspection verification or modification/maintenance procedures
    * Has experience in fabrication work including metal, aluminum, composite and plastics
    * Has basic knowledge of cutting, drilling and repair work
    * Experience in two part compounds and bonding processes
    * Experience with overhead cranes, gantries and powered industrial equipment
    * Has mechanical assembly experience
    * Understands the use of basic measuring tools (calipers, micrometers, height gages)
    * Proficient in MS Office Suite
    * Experience working in MRP
    * Extensive hand tool experience
    * Ability to read and follow complex written instructions


    Qualifications:
    * Associate's degree in a related field of study and at least 4 years of relevant experience
    * A higher level degree may substitute for experience
    * Related experience may be considered in lieu of required education
    * Ability to read and understand mechanical and electrical drawings, diagrams, schematics and manuals
    * Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools


    If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




     
    Job Number: 310539
    Job Location: Louisville, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 03/16/2021
    Last Updated: 06/11/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com