Job Search Results

181 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2022/08/19 Friday 01:09AM Pacific Time by ContractJobHunter. )

Listings 1 - 181

Go To My Job Tracker

Expand all descriptions

2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Sr. Test Engineers Needed!!! Systems & Airframe Structures

Description:
Currently seeking Test Engineers for 2 different teams. Systems and Structures.

1. Sr Systems Test Engineer:
• Systems Test – This team is looking for candidates with a strong background in qualification and acceptance testing of mechanical systems and components, as well as avionics testing. Experience with environmental test, vibration tests, acceleration test is strongly desired; experience with testing per DO-160 is a good indicator. Background in test fixture design and vibration fixture modal analysis. Cradle to grave ownership of testing – planning, design, execution, analysis, and reporting.


2. Sr Airframe Structural Test Engineer:
• This team is looking for candidates with a strong background in testing of primary structure for aerospace vehicles. Key skills include CATIA modelling and drafting, test fixture design & analysis, and data acquisition. Experience with composite structure and a strong foundation in mechanical engineering is highly preferred. Cradle to grave ownership of testing – planning, design, execution, analysis, and reporting.
General Reveiw:
Seeking a senior test engineer to support structures, systems, and avionics testing of components, assemblies, and integrated airframes. The primary tasks for this role include collecting test requirements, writing test plans, designing test fixtures, and executing tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment. As senior test engineer, you will help provide mentorship and guidance to associate engineers.
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Participate in the test engineering review, approval, and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.
What You Bring
• 10 years or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience – Structural or Systems testing background preferred.
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• Hydraulic control, instrumentation, signal conditioning, and data acquisition for variety of environmental tests of avionics and mechanical systems.
• CAD modelling experience – Experience with Catia V5 preferred.
• Test fixture design and analysis.
• Vibration fixture modal analysis.
• Experience with DO-160 environmental test standards for mechanical systems.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Strong knowledge of aircraft or spaceship design and analysis.
• Familiarity with composites and metallic primary structures.
• Results oriented approach to completing test activities successfully.
• Focus on safety and reliability in testing.
• Excellent verbal and written communication skills.
• Excellent organization and problem-solving skills.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint.
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15).
Preferred Skills and Experience
• Aerospace Engineering Degree
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Certified LabVIEW associate developer or higher certification
• Computer programming experience
• Experience using PXI, cDAQ NI Hardware
Physical and/or Additional Requirements
• Must be able to work all shifts and available for overtime as well as weekends when needed.
• Must be able to stand for extended periods – 6 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.
ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.



The Structures Company LLC is an AA/EOE.
 
Job Number: 528
Job Location: Mojave, CA
Rate: OPEN ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 03/03/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Aerospace Designer (NX)

Description:
An Aerospace Designer job in Cincinnati, OH is currently available through Belcan. In this role, you will be developing 3D models and working with Detailers to create 2D drawings of pre- and post-production detail parts, assemblies, sub-systems, and integrations for aircraft engines. A Government Secret Clearance is needed or the ability to obtain one is a requirement for these positions.
Principle Responsibilities:
1. Using engineering design basis requirements, determines the appropriate design package.
2. Coordinate with the Project Manager/Senior Designer, on technical design, form fit and function.
3. Works with design group assigned to project, in the development and final completion of the design package for issue to client.
4. Prepares various drawings and discipline design documents such as specifications, material and equipment lists, change orders, transmittals, etc., as required.
5. Ensures compliance with established design standards and practices.
6. Ensures operability and maintenance.
7. Assists in mentoring and training of detailers as required.
8. Documents all agreements and understandings reached with other disciplines and client personnel.
9. Resolves client questions or field problems concerning the design package.
10. Identifies design scope changes and their impact.

Required Qualifications:

· Strong parametric CAD design utilizing NX and TeamCenter.
· Microsoft Office Suite experience
· Proficient use of ANSI/ASME Y14.1-2009 design and drafting standards including GD&T applications
· Experience with reviewing engineering drawings and related documents for technical accuracy
· Excellent communication and interpersonal skill
· Ability to function with minimal supervision
· Able to efficiently multitask and flexible enough to meet evolving customer prioritization of tasks
· Legal authorization to work in the U.S. is required/must be U.S. Citizen or U.S. Person

Preferred Qualifications:
· NX is the preferred CAD software
· Experience with Stack-ups
· Familiarity with aerospace manufacturing processes but not required.
· Experience working in aerospace field, specifically Turbine engine experience
· Experience Casting, Forgings and Machining's.
· Experience with Model Based Definition (MBD) is a plus but not required.
Environment:
Office sedentary; use of work phones, computers, printers, and general office equipment.
Physical Demands: No exposure to field conditions or manufacturing environments.
Travel: 0%
Qualifications:
A. Education: Associate degree or equivalent experience.
B. Minimum Experience: Minimum of an associate degree in drafting from an accredited vocational/technical institute
C. Preferred Experience: Minimum of two (2) year industrial drafting or the equivalent of an associate degree in drafting from an accredited vocational/technical institute; or a degree from four (4) year bachelor's degree in engineering field.
D. Technology: Proficient in the use of CAD and other computer processing tools.

 
Job Number: 318185
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/05/2022
Last Updated: 08/18/2022
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
City, State: Belcan - Recruiting
Email: kfabing@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=318185&job_number=318185

Aerospace Engineer

Description:
This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Transmissions Design Engineer. Experience in Rotary Aircraft Dynamic Component Design, performing design and analysis in one of the following areas: gears, driveshafts, housings, bearings, and/or lubrication systems. Transmissions Design Engineer will be responsible for innovative gearbox sub-system and component level designs through all levels of the new product lifecycle. This includes creating and checking conceptual layouts, performing preliminary sizing/analysis, and detailed design tolerancing/stack-ups. Proficient with CAD modeling CATIA V5, or CATIA V6 3DX, drafting, and GD&T practices.
Keywords: CAD modeling CATIA V5, or CATIA V6 3DX, drafting, GD&T practices, gears, driveshafts, housings, bearings, and/or lubrication systems.
Level 4: BS+16 YRS or MS+14 YRS
Worker will Telework >= 50%
4/10-1st Shift
OT Status: Exempt
Additional Skills:
B.S. in Mechanical Engineering, Mechanical Engineering Technology, or Aeronautical Engineering is preferred.
Skills:
Category
Name
Required
Importance
Experience
Areas of Expertise 3D Models No 1
Areas of Expertise CATIA No 1
Software Skills 3DX Development No 1
Technical Skills 3D Animation/Modeling No 1
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) No 1

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4114-4092-11534
Job Location: Stratford CT
Per Diem: --
Overtime: --
Start Date: 2022-07-19
Input Date: 05/27/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Aerospace Engineer

Description:
This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Transmissions Design Engineer. Experience in Rotary Aircraft Dynamic Component Design, performing design and analysis in one of the following areas: gears, driveshafts, housings, bearings, and/or lubrication systems. Transmissions Design Engineer will be responsible for innovative gearbox sub-system and component level designs through all levels of the new product lifecycle. This includes creating and checking conceptual layouts, performing preliminary sizing/analysis, and detailed design tolerancing/stack-ups.
Proficient with CAD modeling CATIA V5, or CATIA V6 3DX, drafting, and GD&T practices.
Keywords: Rotary Aircraft Dynamic Component Design, gears, driveshafts, housings, bearings, and/or lubrication systems, CAD modeling CATIA V5, or CATIA V6 3DX, drafting, and GD&T practices.
Level 3: BS+9-15 YRS or MS+7-13 YRS
Worker will Telework >= 50%
4/10-1st Shift
NO OT
Additional Skills:
B.S. in Mechanical Engineering, Mechanical Engineering Technology, or Aeronautical Engineering is preferred.
Skills:
Category
Name
Required
Importance
Experience
Areas of Expertise 3D Models No 1
Areas of Expertise CATIA No 1
Software Skills 3DX Development No 1
Technical Skills 3D Animation/Modeling No 1
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) No 1

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4113-4091-11534
Job Location: Stratford CT
Per Diem: --
Overtime: --
Start Date: 2022-07-20
Input Date: 05/27/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Aircraft / Aviation Mechanical Systems Engineer

Description:
Mechanical Systems Engineers Needed
MUST BE US PERSONS
Fully remote
This is not a mechanical systems design engineer opening.
MUST have experience developing system requirements.
MUST have experience developing system architecture and doing system integration for landing gear, or powerplant (turbo fan), or fire protection, or hydraulics.
Must have system analysis experience
MUST have aircraft experience.

Responsibilities:
• Conduct the design, analysis, test, and integration of air vehicle subsystems, including but not limited to:
o Landing gear, Steering, Braking, Flight control actuation, Hydraulic systems, Launch and recovery, Payload doors, Environment control system – ECS, Ground service equipment - GSE
• Support definition of requirements for air vehicle subsystems.
• Manage functional and physical interfaces between vehicle subsystems and the vehicle.
• Performs analysis, modeling, and simulation to verify subsystems and components meet requirements.
• Support execution of component, subsystem, and system-level testing, including generating test plans and procedures, test execution, and analysis of test results.
• Communicates information about vehicle subsystem design, requirements, and performance between the design team, management, customer, subcontractors, and vendors.

Minimum Requirements
• Minimum of B.S. in mechanical or aerospace engineering (or related STEM discipline) plus 5+ years of relevant experience (or equivalent combination of technical education and experience).
• Demonstrated expertise in development of aerospace vehicle subsystems.
• Experience with CAD software (CATIA V5 preferred).
• Excellent written and communication skills.
• Must be a U.S. Person.

Desired Requirements
• Experience leading the development of aerospace systems, from conceptual design through production.
• Project management experience.
• Experience with system engineering processes, including but not limited to requirements development, system safety analysis (FHA, FTA, FMEA development), and reliability analysis.
• Experience with finite element analysis, multi-body dynamics analysis, and/or thermal analysis.
• Hands-on experience working with machine shops, specifying fasteners, bearings, and other hardware, integrating prototype aircraft, and conducting performance tests.

THE STRUCTURES COMPANY LLC IS AN AA/EOE.
 
Job Location: Remote, Remote
Rate: up to $90/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 05/26/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Aviation Wire Harness Design - Mentor Graphics

Description:
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704

TSC is an AA/EOE.
 
Job Location: Manassas, VA
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

CAD Designers

Description:
Mechanical or elecrical designs using Autodesk Inventor, Creo, NX, Solidworks, CATIA

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 01/24/2022
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Programmer

Description:
A CMM programmer job is currently available at Belcan in Dillon, SC. This is a 4-6 month contract position that is likely to be extended or go direct. You are a great matching candidate if you have CMM Programming skills in PCDMIS and 10 years of experience in dimensional inspection of aerospace components.

*This is an onsite position and we will pay for travel and lodging expenses*

CMM Programmer Job Duties:
* Handle preparations for parts requiring CMM
* Inspection Software Quality Assurance
* Program, setup and operate CMM; laser tracker; FARO arm; Blue Light system
* Using design data to inspect machined and received components
* Perform first article, in-process & final inspections as required
* Provide feedback to machinists and engineers with dimensional data
* Document, track and complete nonconformance reports

Qualifications:
* CMM inspection programming and operation.
* Outstanding blue print reading skills including GD&T per ASME Y14.5M-1994 or 2009 standard.
* Excellent interpersonal skills.
* Proficient in the use of precision hand tools, gauges, optical comparator, and surface plate work
* Experience inspecting tight tolerance, high complexity, feature rich components.
* Familiar with the use of personal computers.
* Self-motivation and ability to prioritize projects to meet completion dates.
* Due to the nature of the work must be a U.S. citizen

Desired but not required skills:
* CAD system knowledge
* Cognitens CoreView or ATOS Professional
* DMIS, PC-DMIS & Creo Experience- The CMMs this role will interface with are CAMIO & MODUS- w/REVO Head
* PC DMIS NC on machine inspection.
* Faro and Verisurf knowledge.
* Basic machining knowledge.
* Familiar with Mastercam preferably X6 or higher.
* Outside processing knowledge (Additive Manufacturing, heat treat, plating, coating, EDM, grinding, etc.)

If you are interested in this CMM Programmer job please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions
 
Job Number: 322030
Job Location: Dillon, SC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/28/2022
Last Updated: 08/01/2022
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

CNC Machinist - Setup/Operator

Description:

JOB TITLE: CNC Machinist - Setup/Operator

LOCATION: Alameda, CA (On-Site)

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Qualifying Questions:

    Are you a US persons as noted in the Job description?

    Do you meet the educational requirements for this job?

    Do you meet the experience requirements for this job?

    Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract or Contract to Hire (W2)

    Rate of pay: $30-$50/hr - Overtime available Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

    Interpret dimensioned part drawings with fluency in order to understand the tolerancing requirements. Set up CNC metal-cutting machines such as mills or lathes, by building fixture setups for new (or recurring) jobs and establishing part datums and tool lengths. Operate CNC machines by ensuring that the machine is kept running and that downtime for inspection, maintenance, or changeover is minimized. Collaborate with programmers or production managers when program adjustments or new setups are required. Support shop operations by contributing to material prep, deburring, and daily maintenance on your equipment Inspect your in-process parts using a variety of handheld inspections tools including calipers, micrometers, and hard gauges. Work with the Quality Control Lab for inspecting first articles and to identify offsets that will require adjustment at the machine. Communicate positively with fellow machinists, managers, engineers, and quality control staff in order to help build a transparent and cooperative atmosphere. Improve shop effectiveness by identifying bottlenecks and recurring issues. You have an understanding of what continuous improvement looks like, and you leverage your Machinist role to support that end.

Desired Skills:

    2+ years' experience as a Setup Machinist Possess manual machining experience from prior employment or trade school Ability to calculate feeds, speeds and can understand basic G code Understand the differences between different types of materials, their grades, their relative machineability, and can identify them quickly Proficient with measuring instruments including calipers, micrometers, and hard gauges Highly proficient reading shop drawings and can communicate the requirements set forth by the drawing to others if requested Ability to lift 40+lbs, push heavy carts or crates, and can stretch, reach, kneel, or crawl as may be required by certain tasks Monitor machinery in order to identify necessary maintenance or safety issues Experience using Excel, Word, and email, and are otherwise comfortable using a computer Ability to undertake projects and tasks with a distinct attention to detail, a sense of urgency, and an optimistic attitude Possess excellent communication skills (written and oral)
Desired Multipliers:
    5+ years of hands-on experience as a machinist in a professional shop environment Formal education in a machining program Experience in a high-mix, fast paced job shop CAD or CAM experience on any platform Understanding of GD&T Experience in fabrication, including welding, sheet metal, waterjet, assembly, or finish work Training in an engineering or design discipline

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4101-4079-11534
Job Location: Alameda CA
Per Diem: --
Overtime: --
Start Date: 2022-07-12
Input Date: 05/25/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

CNC Machinist - Waterjet Focus

Description:

JOB TITLE: CNC Machinist - Waterjet Focus

LOCATION: Alameda, CA (On-site)

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Qualifying Questions:

    Are you a US persons as noted in the Job description?

    Do you meet the educational requirements for this job?

    Do you meet the experience requirements for this job?

    Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract or Contract to Hire (W2)

    $30-$50/hr - Overtime available

    Medical, dental, and vision plan with United Healthcare

    Robust 401K

    Potential for bonuses

    Sick pay, and holiday pay for those who qualify

Summary:

    Interpret dimensioned part drawings with fluency in order to ensure that the correct machine tools, work-holding, and inspection equipment are selected. Program and operate CNC waterjet, CNC brake press and hybrid CNC/Manual mills and lathes. This requires taking a part from start to finish, and includes programming in CAD/CAM software, calculating offsets, feeds and speeds, setting up tools and work-holding, proofing programs, loading parts, and breaking down setups when finished. Operate manual metal-cutting machinery such as knee mills, engine and tool room lathes, drill presses, tapping machines, surface grinders, and saws as necessary. Inspect finished or in-process parts using a variety of handheld inspections tools including calipers, micrometers, and hard gauges. Inspections may be done in cooperation with our QC lab. Communicate with other shop, quality control, and engineering personnel in pursuit of a transparent and cooperative atmosphere. Such communication is needed in order to deliver critical feedback to designers and technicians, to ensure proper fitment and handling, or to participate in manufacturability reviews. Improve shop effectiveness by identifying bottlenecks and recurring issues and offering potential solutions. You have an understanding of what continuous improvement looks like, and you leverage your position as Associate Machinist to support that end.

Desired Skills:

    1+ years' experience as a machinist have prepared you for this fast-paced shop atmosphere Experience setting up and operating manual mills and lathes, and can do so with little to no supervision Possess direct machining experience on manual equipment such as a knee mill, manual lathe, or drill press Ability to calculate feeds and speeds and solve geometry problems Understand the differences between different types of materials, their grades, their relative machineability, and can identify them quickly Proficient with measuring instruments including calipers, micrometers, hard gauges, and height gauges Ability to read shop drawings with fluency, and can communicate the requirements set forth by the drawing to others if requested Ability to lift 40+lbs, push heavy carts or crates, and can stretch, reach, kneel, or crawl as may be required by certain tasks. Capable of operating a ceiling crane and forklift for material manipulation. Experience operating machinery in order to identify necessary maintenance or safety issues while maintaining a clean work area, and can perform your own preventative maintenance. Proficient using Excel, Word, and email, and are otherwise comfortable using a computer for information retrieval and storage. You are comfortable conferring with engineering, supervisory, or manufacturing personnel to exchange technical information. You undertake projects and tasks with a distinct attention to detail, a sense of urgency, and an optimistic attitude. Accountable, humble, and ask questions when in doubt.
Desired Multipliers
    1+ years of hands-on waterjet or laser-cutter experience in a professional shop environment Experience in a high-mix, fast paced job shop Experience in fabrication, including welding, sheet metal, waterjet, assembly, or finish work Trained in an engineering or design discipline Lean manufacturing certifications Experience with Proto-TRAK, multi-axis machines, palletized HMCs/VMCs, laser cutting, or EDM

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4103-4081-11534
Job Location: Alameda CA
Per Diem: --
Overtime: --
Start Date: 2022-07-15
Input Date: 05/25/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

CNC Router Operator

Description:

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Your Mission

The Operator in this role will run precision components on Fanuc based CNC routers. Parts fabricated on these machines will vary in material, complexity, and in tolerance requirements. Parts produced would be low quantity and rarely repetitive. The ideal person for this role must be able to learn quickly and repetitively produce quality components with little supervision. The person in this position must be comfortable working in a team environment and willing to work overtime when required.

Must be willing to work in a team environment and independently
Minimum 1-3 years of experience using CNC routers or related machinery. 3D printer or Gerber cutter operation / programming acceptable
Some experience with CAD/CAM programming (Mastercam preferred)
Coordinate machine operation on both tool and manufactured parts under guidance of others
Observes machine operations for proper functioning. Uses minimal judgment to override feed and speed using manual data input to prevent broken tools and damaged material
Run multiple machines as required
Proficient in using inspection equipment to verify machined features. (eg. Vernier calipers, OD Micrometers, Dial indicators, etc )
Proficient in reading and interpreting engineering blueprints, CAD models, & GD&T symbols
Must be willing to assist with equipment operation and maintenance
Must be able to set-up and operate the machines independently with little to no supervision
Excellent organizational and problem-solving skills

What you bring

Must have High School diploma or equivalent
Basic composites knowledge (layup, bonding, common tooling materials, etc.)
Experience machining large variety of materials such as high-density foam, MDF, Carbon Fiber, variety of plastics and some metals
Heavy lifting - Must be capable of lifting/carrying 50 lbs. minimum
Ability to work in extremely dusty/dirty conditions (with PPE)

o Must be able to wear a respirator/dust mask for long periods of time

Computer literacy including Microsoft products a plus (eg. Word, Excel, Outlook, etc )
Forklift operation experience or eligibility to meet requirements to operate forklift

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3478-3460-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 04/02/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Circuit Design Layout Designer - Aerospace

Description:

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Details:

    Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

The ROIC Layout Designer is a highly skilled and experienced senior support individual contributor who will work with design architects and engineers to implement circuit schematics in physical mask layout. This position will also be responsible for floorplan, chip layout, routing and physical verification, as well as supporting and assisting in tapeout.

Desired Skills:

    Bachelor's Degree in engineering or science discipline from an accredited university with a minimum of 4 years of prior relevant experience or an equivalent combination of education, training, and experience. Proven ability of layout in Silicon with some or all of the following: opamps, pll, adc, lvds. Must have experience in using Skywater, On Semi, and related foundry processes. Must have experience with the following EDA tools: Cadence Virtuoso, Mentor Calibre

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, engineer, layout, design,

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2529-2513-11534
Job Location: Plano TX
Per Diem: --
Overtime: --
Start Date: 2022-05-06
Input Date: 12/09/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Composite Structural Design Engineer

Description:
Candidate must be 100% onsite.

Key skills: structures design, engineering, aerospace, CATIA V5 or other CAD work bench and standards such as CFR 14, Part 400, Part 23, Part 25, military or NASA desired.

Seeking a design engineer with experience developing to airframe structural components, assemblies, and integrated systems. This role executes work autonomously and provides technical guidance to a team of engineers through the process of generating detailed design definition, and supporting fabrication and assembly activities throughout the production of the vehicle. Engineers in this position are expected to have strong experience with commercial aerospace standard design practices and methods as well as engineering experience in design and analysis required to develop efficient solutions.

Your Mission
Development of conceptual designs through manufacturing of details, assemblies and installations.
Support production and operations teams to ensure vehicle readiness for flight. This includes a detailed involvement in fabrication and implementation activities.
Participate in the continuous improvement of design practices, procedures and technology.
Participate in the engineering definition review, approval, and release process in accordance with the industry and company standards.
Support review of manufacturing plans and procedures to ensure compliance with design requirements.
Organize time and resources effectively to meet the demands of internal customer requirements.
Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.
What you bring
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
4-8+ years of experience in aerospace industry with a strong design emphasis.
In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
Experience with composite tooling, fabrication, and manufacturing methods.

Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
Excellent verbal and written communication skills.
Strong team player and ability to work independently with excellent organizational and problem-solving skills.
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an AA/EOE.
 
Job Number: 605
Job Location: Mojave, CA
Rate: $60-$84/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months - Possibly Longer
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
MUST HAVE AutoCAD experience (preferred to have some knowledge with the module – “Plant 3-D”)
Knowledge of pneumatic schematics (P&ID) is a plus.
•Plans layouts, draws and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics.
•Utilizes computer-aided design equipment and graphic tools such as CAD, CAM, or CATIA.
•Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices.
•Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve the quality of the product or facilitate manufacturing operations.
•Associate's degree plus 5-9 years of experience directly related to the work assignment (for external candidates only). Good knowledge of the job.
•Substantial acquaintance with and understanding of general aspects of the job with a basic understanding of the technical phases of the job. Performs a variety of activities following standard procedures. Gathers and manipulates common data; verifies data accuracy; creates charts, diagrams, and standard reports.
•In technical positions, may also set up and operate standard equipment to produce and/or test products or process data. Receives general supervision with instructions given for routine work and detailed instructions for new lines of work or special assignments
 
Job Number: 838-1
Job Location: Centennial, CO
Rate: Open
Per Diem: YES
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 06/13/2022
Firm Name: AGREEYA SOLUTIONS
Attention: Ranu singh
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Design Engineer - Level 3 / Level 4

Location: Canoga Park, CA
Pay Range: $70.00 - $78.00/HR
Job Type: 6 Month Contract
Schedule: 9/80

** Candidates must be a U.S. Citizen without Dual Citizenship **
** Our client mandates that all employees and contractors must be fully vaccinated for COVID-19 **
** 4 openings **
** Level 3 candidates should have at least 5 years of direct experience. Level 4 candidates should have at least 10 years of direct experience **
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate’s resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.
** Experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using ProE/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Desired Skills:
-Target mechanical experience
-CREO 5 (working level experience)
-Windchill Product Lifecyle Management (PLM) experience
-Pressurized fluid systems (gas and liquid)
-High pressure systems 10,000 psi gaseous and 2000 liquid
-Machined hardware (subtractive manufacturing)
-Additive manufacturing (some…may 10%)
-Component design
-Hardware integration
-Joining methods – Welding, bolted joints, mechanical fittings
-Stainless steel tubing for fluid routing – bent tubing, orbital welding, mechanical end connections, ¼” to ¾” diameter, .027 to .035 wall thickness
-Integration - thrusters, valves (often times supplier parts), pyro valve, regulators, orifices, ancillary hardware such as machined custom brackets to off the shelf p-clamps.
-Materials – 300 series SS, Inconel, Aluminum, Titanium
-Material compatibility considerations to Hydrazine and N2O4. Helium, Nitrogen, Argon
-Experience working with integrated product teams
-Experience working with analysis teams to evaluate structural margins (to include CAD model preparation for meshing)
-Geometric Dimensioning and Tolerance Specification knowledge and practical application to include tolerance stackups
-Mechanical part selection (picking out bolts, washers, O-ring, Teflon seals, p-clamps, etc.) and preparing the geometry in the hardware under design
-Machine shop experience desired
-Precision, tight tolerance machined hardware (some tolerances down to +/- .001)
-Needs to have ability to prepare and present designs for team review
-Self-starter, deadline driven

Education:
-BS degree in an Engineering field or equivalent field.
-MS degree is desired.
 
Job Number: 18361
Job Location: Canoga Park, CA
Rate: $70.00 - $78.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 08/01/2022
Last Updated: 08/18/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer I

Description:
SUMMARY
Perform engineering analysis and documentation of new and modified components in accordance with engineering standards and project scope.
ESSENTIAL DUTIES AND RESPONSIBILITIES
1. Reviews integration of new technologies to be used in the development of new and improved products
2. Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical issues
3. Enforce the proper use of engineering criteria and drawing standards. Ensure that technical issues are conducted within the framework of company policies and procedures
4. Evaluate designs for performance, safety, and reliability
5. Directs preparation of layouts, drawings, specifications, and bills of material
6. Perform engineering analysis to support the selection of parts, components, and materials that meet requirements
7. Perform job duties in an ethical, professional manner which is consistent with the Oshkosh Way. Conduct duties consistent with the Company’s mission statement, quality objectives, and defined policies and procedures
8. Provide technical assistance for prototype, pilot, and production support
9. Analyze and resolve issues reported to Engineering via verbal or written communication
10. Provide direction to designers and drafters regarding engineering analysis
11. Establishes priorities for work delegated to others
12. Prepare technical proposals, quotations, reports, and presentations
BASIC QUALIFICATIONS
• Bachelor’s of Science in Engineering
• 6-plus months of related experience or internship experience
• Able to obtain a secret security clearance as required by job duties
PREFERRED QUALIFICATIONS
• Experience with a high level cad system
• Possess a strong mechanical knowledge of vehicles and related systems
• Strong verbal presentation and written communication skills
• Excellent time management and organizational skills
 
Job Number: 12
Job Location: Oshkosh, WI
Per Diem: Yes
Overtime: Yes
Duration: 6 months
Start Date: asap
Input Date: 08/02/2022
Firm Name: PACER STAFFING
Attention: lalitha gurung
Address: 1445 CITY AVE STE 10B
City, State: WYNNEWOOD, PA 19096
Phone: 215/666-0012
Website: pacerstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
SUMMARY
Perform engineering analysis and documentation of new and modified components in accordance with engineering standards and project scope.
ESSENTIAL DUTIES AND RESPONSIBILITIES
1. Reviews integration of new technologies to be used in the development of new and improved products
2. Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical issues
3. Enforce the proper use of engineering criteria and drawing standards. Ensure that technical issues are conducted within the framework of company policies and procedures
4. Evaluate designs for performance, safety, and reliability
5. Directs preparation of layouts, drawings, specifications, and bills of material
6. Perform engineering analysis to support the selection of parts, components, and materials that meet requirements
7. Perform job duties in an ethical, professional manner which is consistent . Conduct duties consistent with the Company’s mission statement, quality objectives, and defined policies and procedures
8. Provide technical assistance for prototype, pilot, and production support
9. Analyze and resolve issues reported to Engineering via verbal or written communication
10. Provide direction to designers and drafters regarding engineering analysis
11. Establishes priorities for work delegated to others
12. Prepare technical proposals, quotations, reports, and presentations
BASIC QUALIFICATIONS
• Bachelor’s of Science in Engineering
• 6-plus months of related experience or internship experience
• Able to obtain a secret security clearance as required by job duties
PREFERRED QUALIFICATIONS
• Experience with a high level cad system
• Possess a strong mechanical knowledge of vehicles and related systems
• Strong verbal presentation and written communication skills
• Excellent time management and organizational skills
 
Job Number: 13
Job Location: Oshkosh, WI
Per Diem: Yes
Overtime: Yes
Duration: 6 months
Start Date: asap
Input Date: 05/27/2022
Last Updated: 08/02/2022
Firm Name: PACER STAFFING
Attention: lalitha gurung
Address: 1445 CITY AVE STE 10B
City, State: WYNNEWOOD, PA 19096
Phone: 215/666-0012
Website: pacerstaffing.com

Director of Software, Engineering & Manufacturing ( PLM, MRP, MES, ERP) - Aerospace - SF/Oakland, CA - Direct Hire

Description:

JOB TITLE: Director of Software, Engineering & Manufacturing - DIRECT HIRE

LOCATION: Alameda, CA (San Francisco/Oakland area East Bay)

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Qualifying Questions:

    Are you a US persons as noted in the Job description?

    Do you meet the educational requirements for this job?

    Do you meet the experience requirements for this job?

    Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term

    Medical, dental, and vision plan with United Healthcare

    Robust 401K

    Potential for bonuses

    Sick pay, and holiday pay for those who qualify

Summary:

    As our Director of Software for Manufacturing & Engineering, you will be leading the team which is hands-on in supporting, testing, deploying, and running our PLM, MRP, MES, and ERP Systems. As we grow, you will be the subject matter expert who leads PLM architecture, direction, and strategy.

Desired Skills:

      10+ years of working with industry-standard PLM systems (Teamcenter, Aras, Arena, OnShape Experience in MRP, MES, and ERP Systems 5+ years as a manager/people leader Experience with industry-standard CAD systems (NX, Catia, Solidworks, etc.) Cloud platform experience (AWS, Google Cloud, Azure) Experience working within a startup Strong interpersonal skills with the ability to articulate ideas, give technical feedback, and mentor other team members. Previous leadership experience Domain expertise with leading PLM solutions (Teamcenter, Aras, Arena, etc.) Industry-leading CAD solutions (NX, Catia, Solidworks, OnShape, etc.) Entrepreneurial spirit and truly enjoy and take ownership of your work. Self-driven with an analytical mind with a bias for action. Undertake projects and tasks with an attention to detail coupled with a sense of urgency.
ITAR Requirements: This position requires compliance with U.S. Government space technology trade restrictions, specifically the International Trafficking in Arms Regulations (ITAR), Export Administration Regulations (EAR) and additional regulations governing satellite, launch vehicle, missile, and other related technologies. All jobs restricted by these regulations will be contingent upon the applicant's status as a documented U.S. Person or their ability to receive a trade license from the cognizant government agency; in addition to any required company background checks and in compliance with applicable U.S. and California laws. Similarly, positions requiring the ability to work on government contracts or a security clearance are also contingent upon the applicants ability to receive the appropriate clearance and be allowed to work on U.S. government contracts. The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3992-3969-11534
Job Location: Alameda CA
Per Diem: --
Overtime: --
Start Date: 2022-07-12
Input Date: 05/13/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Sean Smith
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Electro-Mechanical Design & Test Engineer - eVTOL

Description:
PDS Tech is currently seeking a Senior Design Engineer (Mechanical/Electro-mechanical) for our client in Santa Cruz, CA
6 mo+ contract assignment


Overview
Our client is seeking a highly organized, passionate individual to join our Testing Team. As part of this team, you will design hardware to assemble, install, and perform validation and verification testing of flight critical components and systems for VTOL electric aircraft. Work may include detailed CAD design of parts and subassemblies, hands-on prototyping, and integration of components into designs, on the fly modifications of systems to match modifications on the flight hardware, etc.

Responsibilities

  • Create, and mentor others in the design of hardware to assemble, install, and perform validation and verification testing of flight critical components and systems.  This will require working closely with the Airframe and Actuators, Propulsion and Avionics, and Software teams, to capture the nuances of the components, system architectures, and operating conditions, that define the design requirements for these projects.
  • Develop full designs, drawing packages, BOMs, and assembly instructions for the above projects.  Additionally procure hardware from suppliers, and coordinate manufacturing with internal shops.
  • Lead integration of designs and ensure that the systems meet the design requirements set out from the beginning.  This may involve on-the-fly modifications of designs to keep up with modifications to the hardware to be assembled, installed, or tested.
  • Manage the project status and timelines for the Integration and Testing Design Team and collaborate with Team Lead to ensure proper resource allocation to de-risk the critical paths.
  • Create and implement tools to maximize Design Team productivity.
  • Manage the hardware needs of the Design Team and provide recommendations for investment.

Required
  • M.S. in Mechanical Engineering or a relevant discipline 
  • 6+ years of work experience in relevant industry 
  • Strong engineering knowledge and instincts
  • Excellent problem-solving skills
  • Strong communication and social skills. The ability to work with many different people and manage working relationships
  • Hands-on attitude
  • Proficiency in Computer Aided Design, and engineering drawing creation
  • Experience in mechanical design and fabrication of heavily loaded components and structures, as well as high-precision components.  
  • Experience with design and fabrication of weldments, hydraulic systems, and pneumatic systems.
  • Hands on machine shop skills using lathe, mill, welder, and other machine shop equipment.
  • Experience with project execution from initial concept development through to final commissioning of system.
  • Pursuant to various local, state, and federal regulations, you must show proof of your full COVID-19 vaccination status prior to your start date.  Exemption requests are available for bona fide religious and medical circumstances.

Desired

  • Ph.D in relevant discipline 
  • 10+ years of work experience in relevant industry 
  • Experience with Dassault Systemes CAD, specifically using Generative Shape Design, Part Design and Assembly Design 
  • Project management experience
  • Experience designing aerospace test equipment
  • Experience with design of automated hardware, including sensor selection and implementation
  • Experience with PLC programming and controller development for industrial equipment
  • Experience with hardware in the loop testing
  • Experience designing aircraft flight hardware and/or ground support equipment
  • Experience with High Voltage systems
  • Aircraft homebuilding or rapid prototyping experience is a plus
  • Experience with aircraft FAA certification processes 

If you are interested in discussing this position, please forward your resume to: denglert@pdstech.com
 

     
Job Number: 2210150913
Job Location: Santa Cruz, CA
Duration: 6 months
Input Date: 05/05/2022
Last Updated: 08/18/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: denglert@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jpOFQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
#nowhiring! Belcan is excited to work with our client in the engineering industry in hiring an Embedded Software Engineer in Houston, TX! Hybrid position, will give time for relocation but must be onsite as needed

Location: Houston, TX
Keywords: #MarinePowertrain ; #NPI ; #CPI ; #EDS ; #CANape ; #CANalyzer ; #Electronics ; #FMEA ; #HIL ; #SoftwareTest ; #Datalinks ; #ControlSystems

Candidate Responsibilities
* Develop control systems for marine powertrains
* Develop document and test functional requirement specifications
* Develop test fixtures and test plans
* Develop and test marine software (integrated testing with engine, panels and displays)
* Support marine projects which improve critical business growth beyond core projects, that drive financial results and project plans
* Support and/or Lead in design review, deep dives and GWs for NPI and CPI projects
* Lead the definition of system architectures and interfaces
* Contribute to the development of control system hardware
* Collaborate with and support other engineers, marketing personnel, customers, and suppliers.
* Release CAT Engineering Drawings (EDS and MCS)
* Support and/or Lead Local CPI projects
* Support customer field follow

Typical Day **Hybrid position and will give time for relocation but MUST be able to be onsite as needed**

* Collaboration with internal and external teams to develop product requirements
* Detailed Software Requirements Specification (SRS) feature descriptions for Hybrid or Electrical Control Systems
* Feature validation on Hardware in Loop test bench

Qualifications:

Required
* Bachelor's degree in an accredited Electrical Engineering or equivalent control system work experience
* 5-7 years of relevant engineering work experience in the space of system controls and integration
* Experience with Electronic Hardware and Software testing
* Experience reading electrical schematics
* Experience with CANape or CANalyzer
* Experience with complex control system designs
* Experience with datalinks: J1939
* Experience with Boundary Diagrams, Interface Analysis and FMEAs
* Superior attention to detail
* Highly organized person with proven analytical / electronic troubleshooting skills
* Team player able to work with internal/external suppliers
* Ability to prioritize work efforts & multi-task on parallel activities
* Up to 10% domestic and some international travel (valid passport & driver's license required)
* Some Weekend Travel may be required
* Good communication, interpersonal and collaboration skills.
* Experience with datalinks: CDL, Modbus
* Experience with creating detailed engineering requirements documents
* Experience with CAT Marine engines, marine powertrains, panels or displays
* Experience with multi-axis controls strategies and embedded software development
* Experience with Gensets, VFDs and Motors
* Experience with CAT ET, and Cadet
* Experience with Marine Classification Society requirements
* Experience with 6S CPI Green Belt Lead projects

If you are interested in this job please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com
 
Job Number: 325400
Job Location: Houston, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/16/2022
Last Updated: 08/16/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 2

Description:
Inconen is looking for an Engine System Design Engineer - Level 2 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 2 candidates should have between 2 and 5 years of experience **

Duties:
-Performs engine system level design tasks for Energy Generation System.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-2+ years of related experience.
 
Job Number: 17921
Job Location: Canoga Park, CA
Rate: $30.00 - $35.71/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 03/15/2022
Last Updated: 06/24/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 4

Description:
Inconen is looking for an Engine System Design Engineer - Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 4 candidates should have over 10 years of experience**

Duties:
-Performs engine system level design tasks for Energy Generation System.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-10+ years of related experience.
 
Job Number: 17920
Job Location: Canoga Park, CA
Rate: $65.00 - $71.43/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 03/15/2022
Last Updated: 06/24/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer

Description:
SUMMARY
Perform engineering analysis and documentation of new and modified components in accordance with engineering standards and project scope.
ESSENTIAL DUTIES AND RESPONSIBILITIES
1. Reviews integration of new technologies to be used in the development of new and improved products
2. Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical issues
3. Enforce the proper use of engineering criteria and drawing standards. Ensure that technical issues are conducted within the framework of company policies and procedures
4. Evaluate designs for performance, safety, and reliability
5. Directs preparation of layouts, drawings, specifications, and bills of material
6. Perform engineering analysis to support the selection of parts, components, and materials that meet requirements
7. Perform job duties in an ethical, professional manner which is consistent. Conduct duties consistent with the Company’s mission statement, quality objectives, and defined policies and procedures
8. Provide technical assistance for prototype, pilot, and production support
9. Analyze and resolve issues reported to Engineering via verbal or written communication
10. Provide direction to designers and drafters regarding engineering analysis
11. Establishes priorities for work delegated to others
12. Prepare technical proposals, quotations, reports, and presentations
BASIC QUALIFICATIONS
• Bachelor’s of Science in Engineering
• 6-plus months of related experience or internship experience
• Able to obtain a secret security clearance as required by job duties
PREFERRED QUALIFICATIONS
• Experience with a high level cad system
• Possess a strong mechanical knowledge of vehicles and related systems
• Strong verbal presentation and written communication skills
• Excellent time management and organizational skills
 
Job Number: 14
Job Location: Oshkosh, WI
Per Diem: Yes
Overtime: Yes
Duration: 6 months
Start Date: asap
Input Date: 05/27/2022
Last Updated: 07/25/2022
Firm Name: PACER STAFFING
Attention: lalitha gurung
Address: 1445 CITY AVE STE 10B
City, State: WYNNEWOOD, PA 19096
Phone: 215/666-0012
Website: pacerstaffing.com

Engineering Technician II

Description:
Are you looking for a challenging opportunity that leverages your technical expertise? We may have the position you are seeking!

As an Engineering Technician II, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.

Must-haves:
*Associate's degree in a related field of study and at least 2 years of relevant experience
*A higher level degree may substitute for experience
*Related experience may be considered in lieu of required education
*Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
*Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Preferred:
*Previous experience and/or certifications within the aerospace and defense industry
*Previous experience in a manufacturing environment
*Experience with AutoCAD or other 3-D CAD software
*The ability to obtain and maintain a Security Clearance may be required Learn more about *the background check process for Security Clearances

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Middleton, WI
Rate: $25/HR - $29.50/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/04/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Engineering Technician III (Contract)

Description:

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Details:

    On-site in Denver, CO area Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

Are you looking for a challenging opportunity that leverages your advanced technical expertise? Come join our team! As an Engineering Technician III, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.

Must-haves:

    Associate's degree in a related field of study and at least 4 years of relevant experience

      A higher level degree may substitute for experience

      Related experience may be considered in lieu of required education

    Ability to read and understand mechanical and electrical drawings, diagrams, schematics and manuals

    Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Preferred:

    Previous experience and/or certifications within the aerospace and defense industry

    Previous experience in a manufacturing environment

    Experience with AutoCAD or other 3-D CAD software

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3864-3845-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-07-12
Input Date: 05/17/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Matthew McCombs
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Communicates problems and issues to others for resolution. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies. Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Communicates problems and issues to others for resolution. Develops moderately complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Facilitates the implementation of moderately complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Communicates problems and issues to others for resolution. Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies. Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Ensures accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Manages or supports construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.Produces or procures detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents. Translates customer requirements into design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. With limited supervision, develops and updates design standards and site-specific operating procedures in order to establish common practices. Provides input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts. Translates customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements. Plans, manages, and executes projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Assists in the creation of contract scope. Ensures suppliers comply with all contract obligations.Interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.
Skills
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
Knowledge of facilities requirements analysis, facilities planning, facilities design standards and specifications, building codes, and facilities evaluation techniques and methodologies in support of product planning, deployment and on-going support.
Knowledge of relevant government laws and regulations impacting the functional responsibilities of the occupation.
Ability to utilize technological tools (e.g., PC's, web sites) and business system applications to manage, synthesize, and interpret data relevant to workloads, responsibilities, problem identifications and resolutions. Ability to operate relevant personal computing hardware (e.g., personal computers, software, printers, storage media) and standard software (e.g., word processing, graphics packages, spreadsheets/databases).
Knowledge of mechanical engineering theories (e.g., compressible/incompressible fluid flow, Bernoulli's Theorem, thermodynamics, control theory, Mohr's theory of stress) and methods/formula selection (e.g., vibration analysis, seismic analysis, fan laws, load calculations, heat transfer, flow, air/water balancing, root cause analysis, pressure drop).
Knowledge of applicable mechanical engineering regulations/standards (e.g., OSHA, CALOSHA, WISHA, American Society of Mechanical Engineers, American Society Heating, Refrigeration and Air Conditioning Engineers, American National Standards Institute, National Fire Protection Association Standard, Underwriters Laboratory Testing Lab), codes (e.g., Uniform Building Code, Uniform Mechanical Code, Uniform Plumbing Code), and ordinances (e.g., local building code amendments, energy code).
Knowledge of mechanical systems' (e.g., air conditioning, steam, piping, dust collecting, controls, refrigeration, water systems, industrial waste, fire suppression) capability, capacity, operating characteristics (e.g., temperature, pressure, flow, energy efficiencies), and constructability (e.g., space, interface, interference, accessibility).
Ability to use tools and applications in costing and sizing of small to large size projects.
Ability to interpret/develop policies, practices, processes, and procedures as they apply to technical documentation to ensure quality product delivery.
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.
The ability to use established physical, mechanical, or scientific principles and perform appropriate tests to identify and solve problems encountered on the job. This includes the ability to locate and isolate the problem, identify possible solutions, and select approaches that are practical and effective.
Additional Skills:
PROJECT/SKILLS
Proj Sched & Resource Mgmt
Information Technology Fluency
Engr Knowledge/Comprehension
Enabling technology/Innovation & Invention
Engineering Drawings & Specs
Auto CAD fluency
Skills: Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3408-3390-11534
Job Location: Puyallup WA
Per Diem: --
Overtime: --
Start Date: 2022-05-04
Input Date: 04/02/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

We are seeking a Senior Facilities Structural Engineer (Level 4) to join our Engineering and Technology (E&T) team with Facilities and Asset Management located in Auburn, Washington.
This position will focus on structural design & structural and seismic analysis for building systems and equipment support.
This position is based primarily in Auburn, Washington. However, up to 30% travel is required between our Fredrickson (located in Puyallup, WA) and Auburn sites.

Position Responsibilities:
Leads project teams to develop moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the structural phases of buildings, equipment installations, utility systems and grounds including advanced seismic designs
Reviews structural/seismic designs to assess compliance with customer requirements, building codes and regulations by applying knowledge of construction principles, practices, and materials
Leads teams to ensure accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to align with regulatory requirements, facility standards, and record retention requirements
Leads production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters
Coordinates designs; reviews and approves documents
Translates customer requirements into design options with documents and estimates
Provides recommendations to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers to identify and assess alternatives and impacts
Leads in interpretation and analysis of regulations, standards, codes, and ordinances with respect to project requirements
Offers project alternatives to assure compliance; provides support to secure permits
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree or greater in an engineering related field
3+ years of experience reading & understanding engineering drawings, blueprints, schematics, and specifications
Experience in structural engineering
Experience using AutoCAD (or similar CAD package)

Preferred Qualifications (Desired Skills/Experience):
5+ years of experience in design, analysis and evaluation of building structures, including foundations, roofing, framing, floors, equipment supports, seismic bracing, etc.
5+ years of experience leading construction projects
5+ years of experience with building and safety codes
5+ years of experience leading cross functional engineering teams
3+ years of experience working in a production environment
Remote, onsite or a combination of both? Combination, onsite 2 days week requirement. Eventually more time onsite a week could be required.
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Additional Skills:
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4061-4039-11534
Job Location: Auburn WA
Per Diem: --
Overtime: --
Start Date: 2022-07-11
Input Date: 05/21/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

We are seeking a Senior Facilities Mechanical Engineer (Level 4) to join our Facilities and Asset Management team located in Auburn, Washington.
This mechanical engineering position will provide leadership on material handling, industrial building HVAC and controls, automation and mechanical systems, reliability and building automation.
This position is based primarily in Auburn, Washington. However, up to 50% travel is required between our Fredrickson (located in Puyallup, WA) and Auburn sites.

Position Responsibilities:
Leads project teams to develop complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural, civil/structural, mechanical, and electrical phases of buildings, equipment installations, utility systems and grounds. Reviews engineering designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials, and takes appropriate corrective action.
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.
Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents.
Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees. Leads the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.
Leads in translation of customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements.
Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Manages the creation of contract scope. Ensures suppliers comply with all contract obligations. Leads in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree or greater in an engineering related field
5+ years of experience reading & understanding engineering drawings, blueprints, schematics, and specifications
3+ years of experience leading engineering teams
3+ years of experience using AutoCAD (or similar CAD package)

Preferred Qualifications (Desired Skills/Experience):
5+ years of experience in a mechanical engineering role
5+ years of experience applying Root Cause Corrective Action (RCCA), or other similar rigorous problem/analysis/resolution, processes to engineering development and manufacturing/production efforts
5+ years of experience assisting with reliability processes in engineering
5+ years of experience in reliability and maintenance methodologies and tools
5+ years of experience repairing and maintaining high pressure steam boilers and air compressors
5+ years of experience working with industrial building HVAC and controls, chilled water, compressed air, process piping, vacuum piping, plumbing, fire protection, and steam & condensate systems
5+ years of experience with applicable codes e.g. NFPA, IBC, UPC, WSEC, and ASME
Experience with electrical, mechanical, and/or structural engineering systems
Remote, onsite or a combination of both? Combination, onsite 2 days week requirement. Eventually more time onsite a week could be required.
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Additional Skills:
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4060-4038-11534
Job Location: Auburn WA
Per Diem: --
Overtime: --
Start Date: 2022-07-11
Input Date: 05/21/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

We are seeking a Senior Level Facilities Electrical Engineer (Level 4) CONTRACTOR to join our Engineering and Technology (E&T) team within Facilities and Asset Management.
You will lead project teams in electrical phases of buildings, equipment installations, utility systems and grounds. This will involve review of electrical designs to assess compliance with customer requirements, building codes and regulations by applying your expertise of construction principles, practices, and materials.
You will also have the opportunity to lead and impact the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning.

Position Responsibilities:
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action.
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.).
Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.
Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements.
Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance.
Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents.
Leads in the translation of customer requirements to design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees.
Analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.
Leads in translation of customer requirements. Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies.
Start Time: 6-7 AM
o Team meeting at 8 am is required.
End Time: 2-3 PM
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree or greater in an engineering related field
5+ years of experience using AutoCAD (or similar CAD package) REQUIRED
5+ years of experience reading & understanding engineering drawings, blueprints, schematics, and specifications
Experience in the switching of high voltage lines and breakers with a minimum of 13.2 KVA

Preferred Qualifications (Desired Skills/Experience):
5+ years of experience in a electrical engineering role
Experience with Arch Flash labeling
Understanding of NFPA 70E standard
5+ years of experience with electrical systems including National Electrical Code, basic relay logic and high voltage systems
5+ years of experience leading engineering teams
5+ years of experience applying Root Cause Corrective Action (RCCA), or other similar rigorous problem/analysis/resolution, processes to engineering development and manufacturing/production efforts
5+ years of experience assisting with reliability processes in engineering
5+ years of experience in reliability and maintenance methodologies and tools
Additional Skills:
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?:
Accountability and Responsibility
Electrical Engineering NEC/Regulations
Electrical Detail Design
Electrical Engineering Drawing
Working in a team environment, be able to collaborate with others on the team, willing/able to work with others.
Ability to project engineer assigned work.

MUST HAVE
Senior engineer that can work project work.
5+ years of experience using AutoCAD (or similar CAD package) REQUIRED
o Remote, onsite or a combination of both? COMBO
Onsite: 3 days on average subject to change.
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.Due to Company education requirements please make sure all submitted candidates have a Bachelor of Science degree or higher in engineering, computer science, mathematics, physics or chemistry. If they do not meet this requirement, please withdraw them from consideration ASAPBasic Qualifications

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3031-3015-11534
Job Location: Tukwila WA
Per Diem: --
Overtime: --
Start Date: 2022-03-25
Input Date: 02/24/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Technical Design 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Job description
Prepares design drawings and construction documents
Updates ACAD systems
Updates drawings to Project Record configuration / revision history
Drafts routine project management plans
Supports root cause analysis activities
Works in a cross-functional team alongside manufacturing, quality, safety, facilities engineering and maintenance, suppliers, and vendors
Ensures compliance with safety, maintainability, reliability, ergonomic factors, and regulatory requirements
Assists with interpretation of drawing configuration / revision history standards
Leads the tracking of contractual performance milestones related to architectural configuration of site ddrawings, assists in development of preventative maintenance and spares plans, and assists with production readiness planning
Provides cross-training on ACAD systems
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Remote, onsite or a combination of both? Combination, up to 5 days onsite possible as needed
OT/DOT expected?: On needed basis
Additional Skills:

Basic qualifications
o 3+ years of experience using AutoCAD or a similar software
o 1+ year of experience managing multiple projects simultaneously
o Experience training others in use of CAD software
Preferred qualifications
o Associate's degree in AutoCAD
o Experience training others in use of CAD software
o 5+ years of experience performing drawing reconciliation
o 5+ years of experience in facilities operations for facilities management

PROJECT/SKILLS
Proj Sched & Resource Mgmt
Information Technology Fluency
Engr Knowledge/Comprehension
Enabling technology/Innovation & Invention
Engineering Drawings & Specs
Auto CAD fluency
Skills: AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3438-3420-11534
Job Location: Auburn WA
Per Diem: --
Overtime: --
Start Date: 2022-07-11
Input Date: 04/02/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Fire Protection Oper Spec B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

MANAGER COMMUNICATION
Crystal is open to communication with supplier teams.

JOB DESCRIPTION
Qualified candidates will be responsible for answering and entering emergency calls while simultaneously dispatching for and monitoring multiple fire and security radio channels with moderate to high volume radio traffic.
Will be responsible for providing approved Pre-Arrival Instructions according to policies and procedures.
Candidate will be responsible for making required and requested notifications.
The dispatcher candidate will be professional and courteous with all customer interactions in person, on the telephone and on the radio.

Qualifications
Demonstrated ability to multitask efficiently is crucial to effectively perform the minimum requirements of this position.
Applicants must possess ability to hear and understand multiple sound sources while simultaneously and accurately documenting information in CAD. Further, candidates must possess ability to receive and communicate information accurately to and from multiple sources while multitasking.
Possess a high degree of emotional self-control and maintain composure to facilitate performance under stressful situations in a collaborative team environment.
Willing to take ownership or actions and mistakes.
Accept and implement constructive criticism and feedback.
Demonstrable measurable progress and improvement throughout the duration of the training program.
Perform in a team environment.
1+ years of experience working as an emergency dispatcher at a Public Safety Answering Point (PSAP) or in a related role within Security + Fire Protection.
1+ years of experience multi-tasking and working in a team environment
Proficient utilizing the Microsoft Office Suite

SHIFT/SCHEDULE
Shift expectations: First
Work schedule: Full time
Start time: 7AM
End time: 3PM
OT/DOT expected?: Yes

PROJECT/SKILLS
Top 3-5 technical/software skills needed to perform this role/job: Must have experience with Microsoft Office Suite. Must have keyboarding skills at a minimum of 35 WPM. Public Safety Answering Point (PSAP) is preferred.
Any certifications required?: No
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2705-2689-11534
Job Location: Mesa AZ
Per Diem: --
Overtime: --
Start Date: 2022-03-07
Input Date: 01/15/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Fire Protection Oper Spec B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

MANAGER COMMUNICATION
Crystal is open to communication with supplier teams.

JOB DESCRIPTION
Qualified candidates will be responsible for answering and entering emergency calls while simultaneously dispatching for and monitoring multiple fire and security radio channels with moderate to high volume radio traffic.
Will be responsible for providing approved Pre-Arrival Instructions according to policies and procedures.
Candidate will be responsible for making required and requested notifications.
The dispatcher candidate will be professional and courteous with all customer interactions in person, on the telephone and on the radio.

Qualifications
Demonstrated ability to multitask efficiently is crucial to effectively perform the minimum requirements of this position.
Applicants must possess ability to hear and understand multiple sound sources while simultaneously and accurately documenting information in CAD. Further, candidates must possess ability to receive and communicate information accurately to and from multiple sources while multitasking.
Possess a high degree of emotional self-control and maintain composure to facilitate performance under stressful situations in a collaborative team environment.
Willing to take ownership or actions and mistakes.
Accept and implement constructive criticism and feedback.
Demonstrable measurable progress and improvement throughout the duration of the training program.
Perform in a team environment.
1+ years of experience working as an emergency dispatcher at a Public Safety Answering Point (PSAP) or in a related role within Security + Fire Protection.
1+ years of experience multi-tasking and working in a team environment
Proficient utilizing the Microsoft Office Suite
Schedule hours are currently 7AM - 3PM, but dispatch center operates 24x7x365 and the candidate must be willing to work variable shifts, nights, weekends, holidays and overtime.
Please do not submit any candidates who have recently been submitted to same position title for same hiring manager.

SHIFT/SCHEDULE
Shift expectations: First
Work schedule: Full time
Start time: 7AM
End time: 3PM
OT/DOT expected?: Yes

PROJECT/SKILLS
Top 3-5 technical/software skills needed to perform this role/job: Must have experience with Microsoft Office Suite. Must have keyboarding skills at a minimum of 35 WPM. Public Safety Answering Point (PSAP) is preferred.
Any certifications required?: No
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3372-3354-11534
Job Location: Mesa AZ
Per Diem: --
Overtime: --
Start Date: 2022-05-04
Input Date: 04/08/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Flight Test Manufacturing Engineer

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Unique Skills:
• Experience with SmarTeam and CATIA or similar software is required.
• Previous experience working as an Mfg Eng and/or manufacturing/mechanical environment is preferred.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-750
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+Years
Start Date: ASAP
Input Date: 08/11/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Casey
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: casey@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Manufacturing Engineer II

Description:
Inconen is looking for a Flight Test Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Experience with SmarTeam and CATIA or similar software is required.
-Previous experience working as a Manufacturing Engineer with Gulfstream and/or manufacturing/mechanical environment is preferred.

Education and Experience Requirements
-Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
-Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Job Description
Principle Duties and Responsibilities:
Essential Functions:
-Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
-Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
-Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
-Author DRDI/DMT rework instructions to support effective corrective actions.
-Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
-Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
-Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
-Investigate and assist in preparing justification for equipment and facility requests.
-Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
-Participate in Design for Manufacturing assessments with Engineering.
-Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
-Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
-Incorporate Lean Manufacturing Methodology into existing and future processes.
-With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
-Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
-Support all Safety, Sustainability and Ergonomic Initiatives.
-Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
-Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
-Initiate and maintain accurate daily/weekly activity status based on work output, as required.
-Perform other duties as assigned.

Other Requirements:
-Proven knowledge of Lean and/or Six Sigma principles.
-Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
-Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
-Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18353
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/13/2022
Last Updated: 08/18/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Group Lead, Structural Design

Description:
Tustin, CA - Mojave, CA

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Key skills: structures design, engineering, aerospace, CATIA V5 or other CAD work bench and standards such as CFR 14, Part 400, Part 23, Part 25, military or NASA desired.

Seeking an experienced design engineer to lead design of airframe structural components, assemblies, and integrated systems for our Mothership program. This role provides technical leadership throughout the design lifecycle from requirements to delivery. Engineers in this position are expected to have strong experience with leadership, aerospace design practices, methods, analysis and critical thinking required to develop efficient solutions to support our objectives.

    Lead team of structural design engineers from requirements, trade studies, prototyping, detailed design, through production of of details, assemblies and installations.

    Support operations and flight test by incorporation of improvements to ensure vehicle readiness for flight.

    Review and approve design definition in accordance with industry and company standards.

    Participate in the continuous improvement of design practices, procedures and technology.

    Assist in management and career leadership of the Structural Design Team.

    Allocate team's resources efficiently to meet the demands of internal customer requirements on time and within budget.

    Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

What you bring

    Bachelor's degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.

    4-8+ years of experience in Aerospace industry with a strong design emphasis.

    Demonstrated experience in leadership role.

    Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23, Part 25, military or NASA desired.

    In-depth knowledge of structural design and fabrication associated with composites.

    Experience with composite design CAD workbenches. CATIA V5 preferred.

    Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.

    Excellent verbal and written communication skills.

    Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3428-3410-11534
Job Location: Tustin CA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 03/30/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Guidance Nav & Control Engr 5

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Job Description:
Experience in complex safety critical system design using: object based three dimensional CAD tools, such as, CATIA; dynamic system simulation tools, such as, Easy5; and traditional engineering analytical methods
Experience in requirements development, design, analysis, and verification & validation of flight control systems
Experience using requirement management tools such as IBM Rational DOORS
Experience with System Safety Analysis including: failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis
Experience with control system and component troubleshooting
Experience with manufacturing regulated and certified, safety critical components and software
Excellent verbal and written communication skills
Demonstrated ability to learn fast and effectively apply prior experience and knowledge to new and different challenges
Demonstrated ability to plan and execute complex projects to successful implementation on-time and within cost constraints
Demonstrated enthusiasm for cross-functional team success
Demonstrated enthusiasm for mentoring and training early career engineers and technicians
Demonstrated resilience and flexibility in the face of technical setbacks
Strong, durable desire to find the right answers in the time available for a cost that makes implementation certain
Additional Skills:
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?:
Advanced Math & System Model
Engr Knowledge/Comprehension
Flight Test
GNC Design and Integration
Government Laws/Regulations
Manager is comfortable with part time work at 20 hours a week OR full time work at 40 hours a week

Remote, onsite or a combination of both? Mix of onsite and remote opportunities

Are you okay with out-of-state candidates?: NO

OT/DOT expected?: POSSIBILITY
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.Updated Requirements for Job Titles that include "Engineering" from HR: Due to company education requirements please make sure all submitted candidates have a Bachelor of Science degree or higher in engineering, computer science, mathematics, physics or chemistry. If they do not meet this requirement, please withdraw them from consideration ASAP

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3280-3263-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-06-07
Input Date: 03/16/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Hydraulics or Waste and Water Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
• 3D design experience releasing primary, secondary structure and/or hydraulic lines and components and/or Waste and Water components in CATIA V5/SmarTeam or equivalent CAD and PLM system.
• Design, qualification, and certification experience of Waste and Water components, OR major hydraulic components such as actuators, valves, control manifolds, brakes, pumps, etc.
• Engineering experience at Aircraft OEM or recognized Major System/Component Supplier.
• Experience in ARP4754 requirements definition, validation, verification.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects.
• Provides specialized technical assistance to team members.
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
• Determines and develops own approach to solutions within schedule and cost objectives.
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
• Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements.
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-735
Job Location: Savannah, GA
Rate: $68-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 05/12/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Hydraulics or Waste and Water Engineer - Eng. Contractor 3

Description:
Hydraulics or Waste and Water Engineer - Eng. Contractor 3

Location: Savannah, GA
Pay Range: DOE
Job Type: Long Term Contract
Schedule: First Shift

**Candidates must be a U.S. Citizen or Permanent Resident**

Candidates with experience in at least one or more of the following are required:
1. 3D design experience releasing primary, secondary structure and/or hydraulic lines and components and/or Waste and Water components in CATIA V5/Smarteam or equivalent CAD and PLM system.
2. Design, qualification, and certification experience of Waste and Water components, OR major hydraulic components such as actuators, valves, control manifolds, brakes, pumps, etc.
3. Engineering experience at Aircraft OEM or recognized Major System/Component Supplier.
4. Experience in ARP4754 requirements definition, validation, verification.

Education and Experience Requirements
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members.
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
4. Determines and develops own approach to solutions within schedule and cost objectives.
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18249
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/18/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Landing Gear Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Essential Functions:
Contributes to planning, developing and coordinating of important engineering projects .
Provides specialized technical assistance to team members .
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
Determines and develops own approach to solutions within schedule and cost objectives .
Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives .
Acts as liaison with representatives outside of the assigned group/area .
Unique skills:
Candidates with experience in at least one or more of the following are preferred.
1. 3D design experience releasing primary, secondary structure and/or hydraulic lines and components in CATIA V5/Smartteam or equivalent CAD and PLM system.
2. Design, qualification, and certification experience of Landing Gear System components or major hydraulic components such as actuators, valves, control manifolds, brakes, pumps, etc.
3. Engineering experience at Aircraft OEM or recognized Major System/Component Supplier.
4. Experience in development and certification using ARP4754 System Requirements Process.

Education and Experience Requirements
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 375626
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/12/2022
Last Updated: 08/18/2022
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Unique Skills:
Candidates with experience in at least one or more of the following are preferred.
• 3D design experience releasing primary, secondary structure and/or hydraulic lines and components in CATIA V5/Smartteam or equivalent CAD and PLM system.
• Design, qualification, and certification experience of Landing Gear System components or major hydraulic components such as actuators, valves, control manifolds, brakes, pumps, etc.
• Engineering experience at Aircraft OEM or recognized Major System/Component Supplier.
• Experience in development and certification using ARP4754 System Requirements Process.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects.
• Provides specialized technical assistance to team members.
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
• Determines and develops own approach to solutions within schedule and cost objectives.
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
• Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements.
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.
• Advanced degree in engineering related field preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-734
Job Location: Savannah, GA
Rate: $65-$70/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 05/12/2022
Last Updated: 08/11/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer - Eng. Contractor 3

Description:
Inconen is looking for a Landing Gear Engineer - Eng. Contractor 3 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Candidates with experience in at least one or more of the following are required:
1. 3D design experience releasing primary, secondary structure and/or hydraulic lines and components in CATIA V5/Smarteam or equivalent CAD and PLM system.
2. Design, qualification, and certification experience of Landing Gear System components or major hydraulic components such as actuators, valves, control manifolds, brakes, pumps, etc.
3. Engineering experience at Aircraft OEM or recognized Major System/Component Supplier.
4. Experience in development and certification using ARP4754 System Requirements Process.

Education and Experience Requirements
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members.
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
4. Determines and develops own approach to solutions within schedule and cost objectives.
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18248
Job Location: Savannah, GA
Rate: $68.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/12/2022
Last Updated: 08/08/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Landing Gear Engineer 3

Description:

JOB TITLE: Landing Gear Engineer 3

LOCATION: Savannah, GA

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Qualifying Questions:

    Are you a US persons as noted in the Job description?

    Do you meet the educational requirements for this job?

    Do you meet the experience requirements for this job?

    Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term

    Medical, dental, and vision plan with United Healthcare

    Robust 401K

    Potential for bonuses

    Sick pay, and holiday pay for those who qualify

Summary:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Acts as liaison with representatives outside of the assigned group/area.

Desired Skills:

    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Candidates with experience in at least one or more of the following are preferred:

    3D design experience releasing primary, secondary structure and/or hydraulic lines and components in CATIA V5/Smartteam or equivalent CAD and PLM system. Design, qualification, and certification experience of Landing Gear System components or major hydraulic components such as actuators, valves, control manifolds, brakes, pumps, etc. Engineering experience at Aircraft OEM or recognized Major System/Component Supplier. Experience in development and certification using ARP4754 System Requirements Process.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3967-3945-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2022-05-24
Input Date: 05/13/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Lead, Electrical Engineer - ROIC Design

Description:
Description:

Lead, Electrical Engineer ROIC Design

We are looking for someone who has experience in designing custom readout integrated circuits (ROICs) in state of the art image sensors. As ROIC Designer, you will help specify and design analog and digital integrated circuit designs for readout ICs.

Essential Functions:

The ROIC Designer will serve as technical expert and point of contact representing ROIC expertise across multiple integrated program teams. In this capacity, responsibilities will include capturing requirements in formal documentation, interfacing with sub-contract design vendors, and contributing to design reviews. You will provide technical input to the ROIC design team while directly contributing to the design effort.

As a key member on a growing team, you will be involved in all aspects of design including block-level design and simulation, chip-level architecture and verification, layout and physical verification, and silicon validation and characterization. The ideal candidate will have ROIC-specific design experience and a demonstrated willingness to mentor other engineers.

Qualifications:

    Bachelor's Degree and a minimum of nine (9) years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. An equivalent combination of education and experience may also be considered. Position requires the ability to obtain and maintain a DoD Security Clearance, which requires U.S. Citizenship. Requires mastery level knowledge within a specific technical area or multiple job areas typically obtained through advanced education combined with experience. Viewed as an expert and/or resource within the field by peers in and outside the organization. Proven ability to understand system-level performance requirement and reduce to ROIC chip-level requirements. Experience designing two or more of: High speed differential I/O, A-to-D converters, bias generation, analog buffers, serializers, readout pixel unit cells. Custom layout of Analog and Digital ICs from the block level to the top level. Cadence Virtuoso and Mentor Calibre verification software. Integrated circuit and electronics test and debug. Knowledge of common image artifacts and contributing factors. Knowledge of non-uniformity sources and correction methods, 3-D noise analysis. Familiarity with camera electronics and software. Documentation, communication and analysis skills.

Preferred Additional Skills:

    Experience with large, stitched-die designs

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2531-2515-11534
Job Location: Plano TX
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/09/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Liaison Engineer II

Description:
Job Description
    Do you enjoy designing and developing innovative solutions to solve tough problems? Join our team to deliver technological solutions in a rapid and agile production environment. Our Mechanical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from orbital systems to space exploration systems. You'll conceptualize and deliver complex mechanical structures and systems and your technical duties include the design and development of new products and processes throughout the product lifecycle.

    Liaison engineering team members are responsible as Design Engineering's primary interface for manufacturing floor activity for Uncrewed Dream Chaser (UDC) and Cargo Module (CM) fabrication on the CRS2 program. Liaison's goal is to ensure design requirements are met between production, planning, and supply chain, while maintaining schedule. Through a detailed understanding of the build processes, engineering change processes, design requirements and extensive collaboration with the internal teams designing and managing installations, this team is a key stakeholder to ensure that the overall build of UDC and CM design achieves all objectives.

    The ideal candidate will excel in a demanding, fast-paced, and evolving environment where they will work as part of a strong, agile and highly motivated team to accomplish the first of its kind in the private industry, flying spacecraft. This individual takes pride in his/her thoroughness, emphasis on follow through, interorganizational communication skills and attention to requirements conformance. The candidate will be able to problem solve from the component level to installation level addressing often first time problems and use strong logic and engineering tools to come up with solutions to problems that meet drawing and document requirements. A successful applicant will have the ability thrive in a challenging multidisciplinary build environment, collectively solving build problems that require collaboration and agreement of various organizations including but not limited to Design, Quality, and Manufacturing engineering.

    Responsibilities:

      Nonconformance (MRB):

        Assess, disposition, analyze, justify, determine cause and relay improvements for build discrepancies, errors and other nonconformances

        Provide guidance on when NC's are appropriate vs other engineering change options, enforce process standards, and provide streamlined support to quickly address and close.

        Understand, prioritize, communicate and execute nonconformance against program schedule.

      Engineering Change:

        Develop and utilize knowledge of various engineering change options, determine and execute the appropriate change option that creates the shortest path and meets engineering requirements for each unique problem.

        Document, prioritize, communicate, and track required engineering changes fed back to the spacecraft design organization for resolution.

        Work closely with manufacturing, quality, planning, and procurement teams to address changes and shepherd them through fruition on the production floor.

        Contribute to innovative, time saving, and cost-effective improvements to help streamline engineering change and response times.

      Drawings, Processes and Technical Specifications:

        Provide guidance to technicians, engineers, and quality assurance engineers related to drawing and spacecraft requirements by overseeing installations, providing interpretation, and information briefs on key topics.

        Support the development and maintenance of program specific technical specifications, and follow through on execution of these specifications to drive efficiency.

        Contribute to development and execution of standard repairs, analysis methods, and acceptable defects to streamline defects processing through MRB.

        Monitor existing processes and nonconformance trends to develop tools and other methods to reduce manufacturing build hours and quality issues, increase production rates, and remove waste from complex processes.

    Must-haves:

      Bachelor's degree in aerospace, mechanical, industrial or manufacturing engineering

      3+ years, with 1 year in a manufacturing environment preferred (1+year with MS)

    Preferred:

      Experience in design and build of primary and secondary composite structures

      Experience in design and build of metallic structures and fittings

      Proficient or familiar with hand calculation methods for structural analysis

      Aerospace propulsion, hydraulics, mechanisms design and build experience desired

      Proficiency preferred in NX CAD, but experience is another CAD package is acceptable

      Familiar with typical PLM architecture

      Experience with utilizing, developing, optimizing, interpreting and maintaining processes, specifications, and work instructions

      Takes initiative, tenacious, and highly energetic

      Able to adapt to a fast-paced and evolving work environment

      Confident and competent in communication across departments and at different levels of leadership

      Experience driving cross-functional changes to address specific technical problems

      Experience monitoring, tracking, and continually improving design via root cause analysis

    IMPORTANT NOTICE:

    To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2784-2768-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 01/26/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Matthew McCombs
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

MRB Structural Engineer Needed!! - TRUTH OR CONSEQUENCE, NM

Description:
Key skills: MRB, structures design, engineering, aerospace, CATIA V5 or other CAD work bench and standards such as CFR 14, Part 400, Part 23, Part 25, military or NASA desired.


MUST be vaccinated!!

Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Review and provide final engineering technical disposition of non-conformance notifications
Participate in product Corrective Action Board (CAR) reviews
This role will do initial training during the week on a 9/80 shift, but ultimately transition to Shift 3 Weekend, Thursday-Monday (4x10).
What you bring
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Strong team player and ability to work independently with excellent organizational and problem-solving skills
 
Job Number: JPC 3434
Job Location: Truth or Consequence, NM
Rate: OPEN - DOE
Per Diem: YES
Overtime: YES
Duration: Long Term Contract
Start Date: ASAP!!
Input Date: 04/14/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Manufacturing Engineer

Description:

Manufacturing Engineer, Spaceship Propulsion Manufacturing

Manufacturing Engineer

Location: Mojave, CA

Contract Type: Full time

Salary: DOE

Who we are: Manufacturing Engineer

Sending people to space has not only expanded our understanding of science, but taught us amazing things about human ingenuity, physiology and psychology.

From space, we are able to look with a new perspective both outward and back. From space, the borders that are fought over on Earth are arbitrary lines. From space it is clear that there is much more that unites than divides us.

If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver, and can make things happen - apply today!

Your Mission: Manufacturing Engineer seeking a Manufacturing Engineer with experience in fabrication of components and assemblies in development and production environments. We are looking for Engineers who can leverage their strengths in standard manufacturing practices and methods to develop efficient and effective solutions that can be easily deployed to the production floor/environment. You will be contributing to and supporting a team of Engineers and Technicians building rocket motor components and assemblies with cutting edge tooling. This includes being skilled at rapid iteration of process and work instructions delivered through technician feedback (continuous improvement). Your goal is to help establish and maintain a lean production environment that will be used to catapult Rocket Motor Production to support future Spaceship flight cadence This includes, but is not limited to the equipment, tools, systems, and materials required to create an efficient, organized, and lean factory that fabricates propulsion systems supporting Virgin Galactic's mission to open space for everyone.

What You Bring; Manufacturing Engineer

Basic Qualifications : Manufacturing Engineer

    Bachelor's degree in Manufacturing Engineering from an accredited institution Experience working on shop floor with technicians/operators in a hands-on environment. Experience in process improvement, root cause analysis, and corrective action implementation Familiarity with Quality Management Systems like TipQA Experience in tooling design across the product lifecycle including developing requirements, prototype design and validation Computer Aided Design experience (Solidworks 2+ years) Ability to read, interpret and create engineering drawings Familiarity with the use and implementation of design for manufacturing/assembly, design to cost, effective product lifecycle management, and product configuration management and control Strong team player and ability to work independently with excellent organizational and problem-solving skills Excellent verbal and written communication skills and ability to interact with all levels of the organization Strong computer skills, including Microsoft Word, Outlook, Excel and PowerPoint Applicants must be U.S. persons as defined by ITAR (22 CFR 120.15)

Preferred Skills and Experience: Manufacturing ENgineer

    Desired experience level: 2+ years with Bachelor's degree Knowledge of Kaizen and Lean Manufacturing philosophies and tools Experience with shop floor layout planning and improvement Experience with deployment of manufacturing execution systems "MES" Experience with composite fabrication and assembly processes

Physical and/or Additional Requirements: Manufacturing ENgineer

    Must be able to work all shifts and available for overtime as well as weekends when needed. Must be able to stand for extended periods 9 hours min. Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces. Physically able to handle items weighing up to 40lbs (unassisted).

ITAR Requirements

To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR 120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

Equal Opportunity Employer; employment with governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, marital status, mental or physical disability or any other legally protected status.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3110-3094-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-07-28
Input Date: 04/22/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Manufacturing Engineer

Description:
PDS Tech is recruiting for manufacturing Engineers in Waterloo, Ia. 
Knowledge of 3D CAD and CAM software (TDM, FeatureCAM, Pro/NC and/or Vericut) or equivalent
Knowledge of Lathes and Machining Centers in the areas of steel or iron machining
Understanding of cutting tooling and tooling systems
Exp. with in-process gauging and multi-axis machining
BS degree preferred but will look at equivalent exp.
1-2 years exp. preferred but are open to fresh grad with strong CNC internship exp. or worked as a machinist during school  

Develop machining processes for new and existing parts
Develop CNC machining programs using CAM Software
Support projects that introduce new CNC equipment into the factory from planning through beginning production
Support, plan and implement CNC processes for product development
 

     
Job Number: 2210150954
Job Location: Waterloo, IA
Duration: 12 months
Input Date: 04/08/2022
Last Updated: 08/18/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: ringle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jpYzQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Test Systems and Methods Engineer)

Description:
Manufacturing Engineer (Test Systems and Methods Engineer) Position Overview:

As part of a small, passionate, and accomplished team of experts, you will be responsible for supporting the manufacturing of various launch vehicle subassemblies. As a Manufacturing Project Engineer, you will translate engineering intent, drawings, and configurations into consistent manufacturing processes which focus on quality and repeatability. The role is multifunctional with a general knowledge needed for tube bending, welding, machining assembly, cleaning, passivation, non-destructive testing, and various other aerospace manufacturing processes.

As an integral member of the propulsion engineering team you will prepare engine test hardware for various spaceflight systems. You will share in the team's impact on all aspects of engine testing, from designing manufacturing equipment to supporting engine install and test. You will work with suppliers and manufacturing partners to translate engineering intent, testing requirements, drawings, and configurations into fully functional hardware on time and on budget.

This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable human spaceflight.
________________________________________

*We offer competitive compensation and benefits packages as well as travel, incidentals, and housing allowances to be onsite in Van Horn, TX. Additionally, we provide an opportunity to work on a rotation schedule - 9 days on, 5 days off.*

Core Responsibilities:

* Develop manufacturing work instructions to clearly define the following manufacturing process: receiving inspection, fabrication, assembly, test, integration, and refurbishment
* Closely manage cost, quality, build sequence, and schedule of hardware throughout the entire testing and final configuration build process
* Perform engineering drawing and test plan review and provide final approval for manufacturing
* Develop process control measures and evaluation through statistical analysis
* Define and support repair and rework activities
* Design, procure, install, and integrate custom manufacturing equipment
* Interface with external suppliers and manufacturing partners to ensure that hardware and equipment is manufactured, processed, packaged, and delivered properly, on time, and on budget
* Perform capacity analysis and evaluate staffing requirements
* Perform root cause analyses when non-conformances and escapes are identified and deploy corrective actions
* Design proper material handling and packaging to protect hardware throughout the build and test process
* Champion tooling, ergonomics, safety, and quality improvements affiliated with the build and test process
* Streamline testing data collection
* Manage hardware configuration and maintain pedigree throughout the entire build and test process
* Troubleshoot operational and build issues along with other technical and non-technical teammates

Required Skills & Qualifications:

* Bachelor of Science in Mechanical, Manufacturing, Aerospace, Electrical, or Engineering (other relevant fields may apply) from an accredited university.
* Three to seven years of manufacturing engineering experience working in a complex product testing environment where performance test tooling, and measurement instrumentation are the norm.
* Working knowledge of Jigs/Fixtures/Test Tooling, Standard Work and Set-up Instructions.
* Hands on experience in hardware manufacturing (i.e. cleaning, non-destructive testing methods, tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, and Manufacturing Execution Systems/Software)
* Proven experience and successful track record of completing testing/manufacturing projects
* Ability to develop processes compliant to industry quality systems such as AS9100.
* Strong written, personal, technical, and software skills (CAD, Schedule Tracking, Risk and Issue Tracking, Technical Report Writing, Excel, Word, PowerPoint, Project, Outlook, etc)
* Must be a U.S. citizen

Desired not required skills:

* Knowledge and experience using CREO and Windchill
* Experience with test measurement data acquisition systems and instrumentation
* Experience and knowledge of electro-mechanical assembly
* Experience with tool management systems (identification, storage, maintenance)

If you are interested in this Program Manager job opportunity, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 323625
Job Location: Van Horn, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/28/2022
Last Updated: 07/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Inconen is looking for a Manufacturing Engineer - Level 1 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 1 candidates can be recent college graduates with applicable education**

Duties:
-45% - Developing/Designing Support Hardware and Review Engineering Drawings: The candidate will utilize design and business software (ProE, CATIA, VisMockup, and/or other similar CAD/virtual manufacturing tools/software, MS Office applications such as Word, Excel) to develop, design, review and fabricate hardware in support of the operation and enabling support processes, and Engineering customer.
-25% - Developing and Implementing Manufacturing Fabrication and Assembly Processes and Systems. The candidate will develop and implement the process of precision turning operation of complex configurations on a wide range of material types which will include the following:
Determining tooling requirements to safely facilitate optimum positioning of surfaces for machining, cleaning, packaging and protection for the milling process, support and maintain dimensional requirements, determine machine loading, setups, hardware handling instructions and scheduling.
Perform risk assessments to ensure risks to personnel and environment are eliminated and risk to hardware and facility are accurately accessed and communicated to management.
Determine clean and etching process for a wide variety of materials.
Support design reviews - CDR, CoDR PDR.
-20% - Managing Projects: The candidate will manage processes in accordance with the Lean methodology which will include process certification, process improvement methods (e.g., Kaizen, 3P, VSM, etc.) and other Bluebook elements. They will also prepare Basis of Estimates (BOE) develop and defend to management key strategic manufacturing plans, risk assessments and proposals that target customer and business goals; and differentiate between suppliers based on their technical process (Repeatability, Reliability) and business (Reliability, Rates, CSP, ISO compliant) capability.
-5% - Determining Tight Tolerance Machining: The candidate will determine complex design geometric dimensioning and tolerancing for various machining and measuring methods that meet specifications, tooling and equipment requirements.
-5% - Welding Support: The candidate will develop and implement the process of welding of complex configurations on a wide range of material types. They will also determine tooling requirements for the welding process, and support and maintain dimensional requirements.

Skills:
-This position will be responsible for mechanical component manufacture assembly and integration into rocket engine and power systems products.
-Responsibilities include designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process that could be utilized on all programs within AR, with the potential to acquire greater responsibility as performance and experience dictate.

Personal skills continuously utilized to execute responsibilities:
-Excellent verbal and written communication, including public speaking.
-Organizational/Multi-tasking skills that enhance value stream flow and ensure product value streams are effective at meeting customer and company goals.
-Team building skills – develop relationships across value stream and enabling department resources to effectively manage product value stream.
-Candidate must be able to thrive in a team environment, work independently, and embrace continuous improvement.

Education:
-Requires a Bachelor's degree or higher in Manufacturing/Industrial Technology or Engineering.
 
Job Number: 18374
Job Location: Canoga Park, CA
Rate: $30.00 - $32.33/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 07/06/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Inconen is looking for a Manufacturing Engineer - Level 2 for our client, a well-known Aerospace Company, in Redmond, WA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

Duties:
-In this role, you will lead manufacturing activities and work with a cross-functional team of engineers, as well as program management, assembly technicians, and test personnel to ensure quality manufacture of mechanical hardware.
-Responsibilities include manufacturing process support, work instruction revision and control, and management of hardware flow through production including budget and schedule.

Skills:
Required:
-Work Instructions Writing, blueprint/drawing reading, GD&T, MRP systems, CAD/Solid Modelling.

Desired:
-In addition to above; welding, brazing, assembly

Education:
-Requires a Bachelor’s degree in Industrial Technology, Manufacturing Engineering, Mechanical Engineering or related major and at least 5 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 18295
Job Location: Redmond, WA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 05/20/2022
Last Updated: 07/12/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Inconen is looking for a Manufacturing Engineer - Level 2 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 2 candidates should have 2 years of experience**

Duties:
-45% - Developing/Designing Support Hardware and Review Engineering Drawings: The candidate will utilize design and business software (ProE, CATIA, VisMockup, and/or other similar CAD/virtual manufacturing tools/software, MS Office applications such as Word, Excel) to develop, design, review and fabricate hardware in support of the operation and enabling support processes, and Engineering customer.
-25% - Developing and Implementing Manufacturing Fabrication and Assembly Processes and Systems. The candidate will develop and implement the process of precision turning operation of complex configurations on a wide range of material types which will include the following:
Determining tooling requirements to safely facilitate optimum positioning of surfaces for machining, cleaning, packaging and protection for the milling process, support and maintain dimensional requirements, determine machine loading, setups, hardware handling instructions and scheduling.
Perform risk assessments to ensure risks to personnel and environment are eliminated and risk to hardware and facility are accurately accessed and communicated to management.
Determine clean and etching process for a wide variety of materials.
Support design reviews - CDR, CoDR PDR.
-20% - Managing Projects: The candidate will manage processes in accordance with the Lean methodology which will include process certification, process improvement methods (e.g., Kaizen, 3P, VSM, etc.) and other Bluebook elements. They will also prepare Basis of Estimates (BOE) develop and defend to management key strategic manufacturing plans, risk assessments and proposals that target customer and business goals; and differentiate between suppliers based on their technical process (Repeatability, Reliability) and business (Reliability, Rates, CSP, ISO compliant) capability.
-5% - Determining Tight Tolerance Machining: The candidate will determine complex design geometric dimensioning and tolerancing for various machining and measuring methods that meet specifications, tooling and equipment requirements.
-5% - Welding Support: The candidate will develop and implement the process of welding of complex configurations on a wide range of material types. They will also determine tooling requirements for the welding process, and support and maintain dimensional requirements.

Skills:
-This position will be responsible for mechanical component manufacture assembly and integration into rocket engine and power systems products.
-Responsibilities include designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process that could be utilized on all programs within AR, with the potential to acquire greater responsibility as performance and experience dictate.

Personal skills continuously utilized to execute responsibilities:
-Excellent verbal and written communication, including public speaking.
-Organizational/Multi-tasking skills that enhance value stream flow and ensure product value streams are effective at meeting customer and company goals.
-Team building skills – develop relationships across value stream and enabling department resources to effectively manage product value stream.
-Candidate must be able to thrive in a team environment, work independently, and embrace continuous improvement.

Education:
-Requires a Bachelor's degree or higher in Manufacturing/Industrial Technology or Engineering and at least two (2) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 18373
Job Location: Canoga Park, GA
Rate: $35.00 - $38.34/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 07/06/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Inconen is looking for a Manufacturing Engineer - Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 3 candidates should have 5 years of experience**

Duties:
-45% - Developing/Designing Support Hardware and Review Engineering Drawings: The candidate will utilize design and business software (ProE, CATIA, VisMockup, and/or other similar CAD/virtual manufacturing tools/software, MS Office applications such as Word, Excel) to develop, design, review and fabricate hardware in support of the operation and enabling support processes, and Engineering customer.
-25% - Developing and Implementing Manufacturing Fabrication and Assembly Processes and Systems. The candidate will develop and implement the process of precision turning operation of complex configurations on a wide range of material types which will include the following:
Determining tooling requirements to safely facilitate optimum positioning of surfaces for machining, cleaning, packaging and protection for the milling process, support and maintain dimensional requirements, determine machine loading, setups, hardware handling instructions and scheduling.
Perform risk assessments to ensure risks to personnel and environment are eliminated and risk to hardware and facility are accurately accessed and communicated to management.
Determine clean and etching process for a wide variety of materials.
Support design reviews - CDR, CoDR PDR.
-20% - Managing Projects: The candidate will manage processes in accordance with the Lean methodology which will include process certification, process improvement methods (e.g., Kaizen, 3P, VSM, etc.) and other Bluebook elements. They will also prepare Basis of Estimates (BOE) develop and defend to management key strategic manufacturing plans, risk assessments and proposals that target customer and business goals; and differentiate between suppliers based on their technical process (Repeatability, Reliability) and business (Reliability, Rates, CSP, ISO compliant) capability.
-5% - Determining Tight Tolerance Machining: The candidate will determine complex design geometric dimensioning and tolerancing for various machining and measuring methods that meet specifications, tooling and equipment requirements.
-5% - Welding Support: The candidate will develop and implement the process of welding of complex configurations on a wide range of material types. They will also determine tooling requirements for the welding process, and support and maintain dimensional requirements.

Skills:
-This position will be responsible for mechanical component manufacture assembly and integration into rocket engine and power systems products.
-Responsibilities include designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process that could be utilized on all programs within AR, with the potential to acquire greater responsibility as performance and experience dictate.

Personal skills continuously utilized to execute responsibilities:
-Excellent verbal and written communication, including public speaking.
-Organizational/Multi-tasking skills that enhance value stream flow and ensure product value streams are effective at meeting customer and company goals.
-Team building skills – develop relationships across value stream and enabling department resources to effectively manage product value stream.
-Candidate must be able to thrive in a team environment, work independently, and embrace continuous improvement.

Education:
-Requires a Bachelor's degree or higher in Manufacturing/Industrial Technology or Engineering and at least five (5) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 18372
Job Location: Canoga Park, CA
Rate: $40.00 - $45.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 07/06/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 4

Description:
Inconen is looking for a Manufacturing Engineer - Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 4 candidates should have 9 years of experience**

Duties:
-45% - Developing/Designing Support Hardware and Review Engineering Drawings: The candidate will utilize design and business software (ProE, CATIA, VisMockup, and/or other similar CAD/virtual manufacturing tools/software, MS Office applications such as Word, Excel) to develop, design, review and fabricate hardware in support of the operation and enabling support processes, and Engineering customer.
-25% - Developing and Implementing Manufacturing Fabrication and Assembly Processes and Systems. The candidate will develop and implement the process of precision turning operation of complex configurations on a wide range of material types which will include the following:
Determining tooling requirements to safely facilitate optimum positioning of surfaces for machining, cleaning, packaging and protection for the milling process, support and maintain dimensional requirements, determine machine loading, setups, hardware handling instructions and scheduling.
Perform risk assessments to ensure risks to personnel and environment are eliminated and risk to hardware and facility are accurately accessed and communicated to management.
Determine clean and etching process for a wide variety of materials.
Support design reviews - CDR, CoDR PDR.
-20% - Managing Projects: The candidate will manage processes in accordance with the Lean methodology which will include process certification, process improvement methods (e.g., Kaizen, 3P, VSM, etc.) and other Bluebook elements. They will also prepare Basis of Estimates (BOE) develop and defend to management key strategic manufacturing plans, risk assessments and proposals that target customer and business goals; and differentiate between suppliers based on their technical process (Repeatability, Reliability) and business (Reliability, Rates, CSP, ISO compliant) capability.
-5% - Determining Tight Tolerance Machining: The candidate will determine complex design geometric dimensioning and tolerancing for various machining and measuring methods that meet specifications, tooling and equipment requirements.
-5% - Welding Support: The candidate will develop and implement the process of welding of complex configurations on a wide range of material types. They will also determine tooling requirements for the welding process, and support and maintain dimensional requirements.

Skills:
-This position will be responsible for mechanical component manufacture assembly and integration into rocket engine and power systems products.
-Responsibilities include designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process that could be utilized on all programs within AR, with the potential to acquire greater responsibility as performance and experience dictate.

Personal skills continuously utilized to execute responsibilities:
-Excellent verbal and written communication, including public speaking.
-Organizational/Multi-tasking skills that enhance value stream flow and ensure product value streams are effective at meeting customer and company goals.
-Team building skills – develop relationships across value stream and enabling department resources to effectively manage product value stream.
-Candidate must be able to thrive in a team environment, work independently, and embrace continuous improvement.

Education:
-Requires a Bachelor's degree or higher in Manufacturing/Industrial Technology or Engineering and at least nine (9) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 18371
Job Location: Canoga Park, CA
Rate: $50.00 - $55.77/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 07/06/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 5

Description:
Inconen is looking for Manufacturing Engineer - Level 5 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Level 5 candidates should have 14 years of experience**

Duties:
-45% - Developing/Designing Support Hardware and Review Engineering Drawings: The candidate will utilize design and business software (ProE, CATIA, VisMockup, and/or other similar CAD/virtual manufacturing tools/software, MS Office applications such as Word, Excel) to develop, design, review and fabricate hardware in support of the operation and enabling support processes, and Engineering customer.
-25% - Developing and Implementing Manufacturing Fabrication and Assembly Processes and Systems. The candidate will develop and implement the process of precision turning operation of complex configurations on a wide range of material types which will include the following:
Determining tooling requirements to safely facilitate optimum positioning of surfaces for machining, cleaning, packaging and protection for the milling process, support and maintain dimensional requirements, determine machine loading, setups, hardware handling instructions and scheduling.
Perform risk assessments to ensure risks to personnel and environment are eliminated and risk to hardware and facility are accurately accessed and communicated to management.
Determine clean and etching process for a wide variety of materials.
Support design reviews - CDR, CoDR PDR.
-20% - Managing Projects: The candidate will manage processes in accordance with the Lean methodology which will include process certification, process improvement methods (e.g., Kaizen, 3P, VSM, etc.) and other Bluebook elements. They will also prepare Basis of Estimates (BOE) develop and defend to management key strategic manufacturing plans, risk assessments and proposals that target customer and business goals; and differentiate between suppliers based on their technical process (Repeatability, Reliability) and business (Reliability, Rates, CSP, ISO compliant) capability.
-5% - Determining Tight Tolerance Machining: The candidate will determine complex design geometric dimensioning and tolerancing for various machining and measuring methods that meet specifications, tooling and equipment requirements.
-5% - Welding Support: The candidate will develop and implement the process of welding of complex configurations on a wide range of material types. They will also determine tooling requirements for the welding process, and support and maintain dimensional requirements.

Skills:
-This position will be responsible for mechanical component manufacture assembly and integration into rocket engine and power systems products.
-Responsibilities include designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process that could be utilized on all programs within AR, with the potential to acquire greater responsibility as performance and experience dictate.

Personal skills continuously utilized to execute responsibilities:
-Excellent verbal and written communication, including public speaking.
-Organizational/Multi-tasking skills that enhance value stream flow and ensure product value streams are effective at meeting customer and company goals.
-Team building skills – develop relationships across value stream and enabling department resources to effectively manage product value stream.
-Candidate must be able to thrive in a team environment, work independently, and embrace continuous improvement.

Education:
-Requires a Bachelor's degree or higher in Manufacturing/Industrial Technology or Engineering and at least fourteen (14) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 18370
Job Location: Canoga Park, CA
Rate: $65.00 - $67.43/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 07/06/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer - Mechanical Systems

Description:

Join us for an exciting opportunity to create history!

We are a national staffing firm working with some of the top tier aerospace companies in the world. And we are looking for first-class employees to work with our clients. The contracts are regularly extended and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract: Ongoing Location: Mojave, CA (90 minutes from Los Angeles, CA) Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

Manufacturing Engineer, Mechanical Systems

Mojave, CA

US Persons a MUST

We are seeking a first-rate qualified manufacturing engineer with experience in aircraft mechanical system fabrication, assembly and integration. The primary task for this role will be to help establish the manufacturing process flow and documentation for the installation of mechanical systems in an effort to set up production operations for the Production Team. The engineer in this position will help define what production equipment, tools, systems, and materials will be required in order to create an efficient, organized, and lean factory. After production operations begin, the engineer will assist overseeing much of the systems installation and work on process improvement and production optimization using lean processes and tools.

    Experience with aircraft mechanical systems integration, installation, assembly, or modification required. FAA approved Airframe and Powerplant license (A&P License) a plus. Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years' experience in lieu of formal education. Experience with composite structure and assembly a plus. Knowledge of lean manufacturing philosophies and tools. Excellent verbal and written communication skills. Excellent interpersonal and coaching skills. Ability to interact with all levels of the organization. Excellent organizational skills and problem-solving skills. Strong team player. Excellent computer skills, word, excel, MS Project and Powerpoint. CAD experience (CATIA V5 and Solidworks preferred). GD&T skills through experience and/or formal training. Knowledge and experience with AS9100 a plus. Experience with manufacturing based ERP systems a plus.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential for bonuses, sick pay, and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3098-3082-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-07-20
Input Date: 03/24/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Manufacturing Engineer 2

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.
Experience in:
Electronics manfacturing
Electrical

Oracle
Cost point
Auto-cad

Autonomous systems from ced to space
High mix low rate
Bunch of defense related system
Highly varied projects
New programs
First shift
Must work onsite; no 100% remote option
Successfully completing OJT is a contingency for this assignment
Phone interviews will be scheduled
Additional Skills:
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3777-3759-11534
Job Location: Smithfield PA
Per Diem: --
Overtime: --
Start Date: 2022-06-22
Input Date: 05/04/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Inconen is looking for a Manufacturing Engineer I for our client, a well-known Aerospace Company, in Dallas, TX.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Catia Skills a Plus, AutoCAD required

Education and Experience Requirements
-Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
-Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Job Description
Principle Duties and Responsibilities:
Essential Functions:
-Perform technical studies and conduct analysis of operations (existing or proposed).
-Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
-Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
-Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
-Author DRDI/DMT rework instructions to support effective corrective actions.
-Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
-Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
-Perform productibility studies from engineering drawings.
-Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
-Incorporate Lean Manufacturing Methodology into existing and future processes.
-Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
-Support all Safety, Sustainability and Ergonomic Initiatives.
-Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
-Work on special projects.
-Ensure Quality policies are being practiced; make recommendations and implement procedures to -improve quality.
-Initiate and maintain accurate daily/weekly activity status based on work output, as required.
-Perform other duties as assigned.

Other Requirements:
-Basic knowledge of Lean and/or Six Sigma principles.
-Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
-Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
-Lean Specialist certification or higher preferred.
 
Job Number: 18000
Job Location: Dallas, TX
Rate: $31.79 - $34.94/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/06/2022
Last Updated: 06/24/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Inconen is looking for a Manufacturing Engineer I for our client, a well-known Aerospace Company, in Dallas, TX.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Catia Skills a Plus, AutoCAD required

Education and Experience Requirements
-Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
-Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Job Description
Principle Duties and Responsibilities:
Essential Functions:
-Perform technical studies and conduct analysis of operations (existing or proposed).
-Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
-Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
-Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
-Author DRDI/DMT rework instructions to support effective corrective actions.
-Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
-Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
-Perform productibility studies from engineering drawings.
-Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
-Incorporate Lean Manufacturing Methodology into existing and future processes.
-Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
-Support all Safety, Sustainability and Ergonomic Initiatives.
-Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
-Work on special projects.
-Ensure Quality policies are being practiced; make recommendations and implement procedures to -improve quality.
-Initiate and maintain accurate daily/weekly activity status based on work output, as required.
-Perform other duties as assigned.

Other Requirements:
-Basic knowledge of Lean and/or Six Sigma principles.
-Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
-Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
-Lean Specialist certification or higher preferred.
 
Job Number: 18279
Job Location: Dallas, TX
Rate: $31.79 - $34.94/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/19/2022
Last Updated: 08/08/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:


Unique Skills:

Live aircraft experience preferred.

Education and Experience Requirements
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.
Job Description

Principle Duties and Responsibilities:

Essential Functions: Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. Investigate and assist in preparing justification for equipment and facility requests. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. Incorporate Lean Manufacturing Methodology into existing and future processes. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. Support all Safety, Sustainability and Ergonomic Initiatives. . Aid in development and maintenance of Business Continuity Plan. . Additional Functions:

Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . Initiate and maintain accurate daily/weekly activity status based on work output, as required. . Perform other duties as assigned.

Other Requirements: Proven knowledge of Lean and/or Six Sigma principles. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. Lean Six Sigma Greenbelt Certification or higher preferred.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2571-2555-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2021-12-14
Input Date: 12/15/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Manufacturing Engineer II

Description:
Are you known for your attention to detail and pride yourself in being a responsible professional Manufacturing Engineer? Join our team and take your career to new heights!

Position Purpose:
*Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
*Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
*Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
*Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
*Author DRDI/DMT rework instructions to support effective corrective actions.
*Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
*Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
*Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
*Investigate and assist in preparing justification for equipment and facility requests.
*Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
*Participate in Design for Manufacturing assessments with Engineering.
*Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
*Perform audit of co-workers output based on defined requirements and procedures.
*Must demonstrate knowledge of ME policies and procedures.
*Incorporate Lean Manufacturing Methodology into existing and future processes.
*With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
*Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
*Support all Safety, Sustainability and Ergonomic Initiatives.
*Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
*Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
*Initiate and maintain accurate daily/weekly activity status based on work output, as required.
*Perform other duties as assigned.
*Proven knowledge of Lean and/or Six Sigma principles.
*Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
*Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
*Lean Six Sigma Greenbelt Certification or higher preferred.

Unique Skills:
*Catia V5, SmarTeam,
*SAP and Solumina experience required
*G700 manufacturing line support experience preferred
*G700 MBOM / Work Instruction authoring experience preferred

Education Requirements:
*Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*Eighteen months Manufacturing Engineering, planning, or related technical experience.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Savannah, GA
Rate: $48/HR-$55/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/08/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Manufacturing Engineer II

Description:


Unique Skills:

Experience with live aircraft preferred.

Education and Experience Requirements
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.
Job Description
Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. Investigate and assist in preparing justification for equipment and facility requests. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. Incorporate Lean Manufacturing Methodology into existing and future processes. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. Support all Safety, Sustainability and Ergonomic Initiatives. . Aid in development and maintenance of Business Continuity Plan. . Additional Functions: Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
Perform other duties as assigned.

Other Requirements:
Proven knowledge of Lean and/or Six Sigma principles. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. Lean Six Sigma Greenbelt Certification or higher preferred.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2743-2727-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2022-01-20
Input Date: 01/21/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Prior experience with planning and production support using Manufacturing Execution System (MES) software preferred.(Solumina & SAP preferred).

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18323
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/01/2022
Last Updated: 07/27/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Prior experience with planning and production support using Manufacturing Execution System (MES) software preferred.
• (Solumina & SAP preferred).

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Aid in development and maintenance of Business Continuity Plan. .

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-744
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/01/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra Balcerzak
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: sandra@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Pay Rate: DOE
Job Type: Long Term Contract
Schedule: First Shift

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Previous planning experience with Solumina and SAP preferred.

Education and Experience Requirements:
-Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18250
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/18/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• SAP and/or Solumina planning experience required. Company or other aviation/aerospace shop floor support required. Electrical background/experience highly preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Aid in development and maintenance of Business Continuity Plan. .

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-741
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/11/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Casey
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: casey@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Previous experience with manufacturing configuration management preferred.
-Previous experience with manufacturing engineering preferred.
-Previous experience with manufacturing change management strategies.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18252
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/18/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-SAP and Solumina 2 experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18305
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/23/2022
Last Updated: 08/15/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-SAP and/or Solumina planning experience required.
-GAC or other aviation/aerospace shop floor support required.
-Electrical background/experience highly preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18280
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/19/2022
Last Updated: 08/15/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• SAP and Solumina 2 experiance preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-742
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/11/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Casey
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: casey@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Second Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (Second Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Shift flexibility required as this will eventually become a 2nd shift position. Previous experience with Solumina and SAP preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 18251
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/12/2022
Last Updated: 08/15/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II Weekend

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Unique Skills:
• Preferred experience in a manufacturing or mechanical environment.
• Good communication and customer satisfaction skills.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Aid in development and maintenance of Business Continuity Plan. .

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. .
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. .
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-681
Job Location: Savannah, GA
Rate: $50-$52/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 02/08/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra Balcerzak
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: sandra@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II – 2nd Shift

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Shift flexibility required as this will eventually become a 2nd shift position.
• Previous experience with Solumina and SAP preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-736
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/13/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra Balcerzak
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: sandra@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer III

Description:

Education and Experience Requirements

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Position Purpose:

Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.
Job Description
Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. Investigate and assist in preparing justification for equipment and facility requests. Perform productibility studies from engineering drawings. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc. Keep current on state-of-the-art manufacturing developments. Incorporate Lean Manufacturing Methodology into existing and future processes. Develop business case and present to management for process improvement approval. Assume the duties of the ME Group Head in his/her absence. Assign and review work of subordinate personnel. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems. Lead/coordinate the implementation of projects between multiple orgs. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader. Support all Safety, Sustainability and Ergonomic Initiatives. .

Additional Functions: Ensure quality policies are being practiced; make recommendations to improve quality. .

Other Requirements: Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. . Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2744-2728-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2022-01-20
Input Date: 01/21/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Manufacturing Engineer III

Description:
PDS Tech is seeking Manufacturing Engineer III​  for open positions Savannah, GA

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Essential Functions:
  • Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
  • Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 19. Author DRDI/DMT rework instructions to support effective corrective actions. 20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
  • Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
  • Investigate and assist in preparing justification for equipment and facility requests.
  • Perform producibility studies from engineering drawings.
  • Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
  • Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
  • Keep current on state-of-the-art manufacturing developments. 
  • Incorporate Lean Manufacturing Methodology into existing and future processes.
  • Develop business case and present to management for process improvement approval.
  • Assume the duties of the ME Group Head in his/her absence.
  • Assign and review work of subordinate personnel.
  • Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
  • Lead/coordinate the implementation of projects between multiple orgs.
  • Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
  • Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions

  • Ensure quality policies are being practiced; make recommendations to improve quality.
  • Perform other duties as assigned.


For Additional Information on this Opening Please Contact Kellye Roberts: 
Direct Number: 912-257-4867 
Email Your Updated Resume to kroberts@pdstech.com

Education and Experience Requirements



  • Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 4 years manufacturing engineering, planning, or related technical experience.



Other Requirements:



  • Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
  • Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
  • Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
  • Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
  • Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
  • Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.



For Additional Information on this Opening Please Contact Kellye Roberts: 
Direct Number: 912-257-4867 
Email Your Updated Resume to kroberts@pdstech.com

     
Job Number: 2110144816
Job Location: Savannah, GA
Duration: 6 months
Input Date: 02/24/2022
Last Updated: 08/18/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: kroberts@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jPYMQA2&URLSource=cjhunter

Manufacturing Engineer III

Description:
Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Solumina, SAP, Catia V5

Education and Experience Requirements
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Principle Duties and Responsibilities:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Ensure quality policies are being practiced; make recommendations to improve quality. .

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. .
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 24-756
Job Location: Savannah, GA
Rate: $62/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+Years
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: sandra@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Solumina, SAP, Catia V5

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 18384
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 07/25/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer III - Second Shift

Description:
Position Purpose:
• Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Proficient in Solumina 2
• Proficient SmarTeam and Catia V5

Education and Experience Requirements
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Job Description
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives. .
• Ensure quality policies are being practiced; make recommendations to improve quality. .

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. .
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 24-701
Job Location: Savannah, GA
Rate: $62/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 03/24/2022
Last Updated: 08/15/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra Balcerzak
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Sandra@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer Sr (Laser Tracker Toolmaker) (Contract)

Description:
Do you enjoy collaborating with others to create innovative products and services?
    You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a Laser tracker Toolmaker, you will be responsible for leading the production of tools and specialized parts and devices used in the production of spaceflight hardware at. Support with be provided to cover a very wide range of products from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. The work requires practical skill and knowledge as a Toolmaker to analyze specifications, lay out stock, set up and operate machine tools, and fit and assemble parts to make and repair tools, jigs, fixtures, gauges and hand tools. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. The candidate must have the ability to plan the sequence of operation and materials required according to knowledge of computer technology, such as computer aided design, CAD, or computer aided manufacturing, CAM, to design and create instructions for the manufacture tools. The candidate will be required to test and inspect the tools that are created to ensure that they are true to the original design and function properly. The candidate must have excellent communication skills and the ability to problem solve. Candidate must be able to perform incidental tasks as required to complete the larger task.

Must-haves:

    Basic knowledge of mathematics, algebra and physics

    A minimum of 8 years of combined experience and training similar to that required in a bona fide apprenticeship program as a Tool Maker or Tool and Die Maker; OR eight (8) years of documented Tool Maker or Tool and Die Maker experience; OR five (5) years of documented Tool Maker or Tool and Die Maker experience and three (3) years in a related trade

    6 year of experience in operating a laser tracker (Faro, Leica, API or equivalent)

    Experience with Computer Aided Engineering tools

    Knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

    Ability to:

      Work any shift and work overtime, including daily, weekends and holidays as required

      Work from blueprints, drawings, layouts or other specifications to plan sequences of operations for fabricating tools or assemblies

      Verify dimensions, alignments and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers and dial indicators

      Visualize and compute dimensions, sizes, shapes and tolerances of assemblies, based upon specifications

      Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines and grinders to cut, bore, grind or otherwise shape parts to prescribed dimensions and finishes

      File, grind, shim and adjust different parts to properly fit them together

      Fit and assemble parts to make, repair or modify jigs, gauges and tools using machine tools and hand tools

      Perform tests with completed tools to ensure that parts meet specifications; make adjustments as necessary

      Lift, position and secure machine parts on surface plates or worktables, using hoists, vises, v-blocks or angle plates

      Measure, mark and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes and rulers

      Cut, shape and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rulers and hand tools

      Design jigs, fixtures and templates for use as work aids in the fabrication of parts or products

      Set up and operate drill presses to drill and tap holes in parts for assembly

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2594-2578-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 12/18/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Manufacturing Engineer Sr (Toolmaker-Jigs & Fixtures) (Contract)

Description:
Do you enjoy collaborating with others to create innovative products and services?
    You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a Toolmaker, you will be responsible for producing tools and specialized parts and devices used in the production of spaceflight hardware. Support with be provided to cover a very wide range of products from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. The work requires practical skill and knowledge as a Toolmaker to analyze specifications, lay out stock, set up and operate machine tools, and fit and assemble parts to make and repair tools, jigs, fixtures, gauges and hand tools. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. The candidate must have the ability to plan the sequence of operation and materials required according to knowledge of computer technology, such as computer aided design, CAD, or computer aided manufacturing, CAM, to design and create instructions for the manufacture tools. The candidate will be required to test and inspect the tools that are created to ensure that they are true to the original design and function properly. The candidate must have excellent communication skills and the ability to problem solve. Candidate must be able to perform incidental tasks as required to complete the larger task.

Must-haves:

    Bachelor's of Science degree in related discipline and typically 10 or more years of relevant experience

    Basic knowledge of mathematics, algebra and physics

    A minimum of 8 years of combined experience and training similar to that required in a bona fide apprenticeship program as a Tool Maker or Tool and Die Maker; OR eight (8) years of documented Tool Maker or Tool and Die Maker experience; OR five (5) years of documented Tool Maker or Tool and Die Maker experience and three (3) years in a related trade

    Experience with Computer Aided Engineering tools

    Knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

    Ability to:

      Work any shift and work overtime, including daily, weekends and holidays as required

      Work from blueprints, drawings, layouts or other specifications to plan sequences of operations for fabricating tools or assemblies

      Verify dimensions, alignments and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers and dial indicators

      Visualize and compute dimensions, sizes, shapes and tolerances of assemblies, based upon specifications

      Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines and grinders to cut, bore, grind or otherwise shape parts to prescribed dimensions and finishes

      File, grind, shim and adjust different parts to properly fit them together

      Fit and assemble parts to make, repair or modify jigs, gauges and tools using machine tools and hand tools

      Perform tests with completed tools to ensure that parts meet specifications; make adjustments as necessary

      Lift, position and secure machine parts on surface plates or worktables, using hoists, vises, v-blocks or angle plates

      Measure, mark and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes and rulers

      Cut, shape and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rulers and hand tools

      Design jigs, fixtures and templates for use as work aids in the fabrication of parts or products

      Set up and operate drill presses to drill and tap holes in parts for assembly

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2595-2579-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-03-28
Input Date: 12/18/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Manufacturing Engineer- Composite Structure

Description:

Manufacturing Engineer - Composite Structures

Mojave, CA

US Persons is a MUST

We are seeking a Composite Structures Manufacturing Engineer with experience in composite aircraft production. The primary task will be to help establish the manufacturing process flow and documentation for the fabrication and assembly of composites structure in an effort to set up production operations for the Production Team. The manufacturing engineer in this position will help define what production equipment, tools, systems, and materials will be required in order to create an efficient, organized, and lean factory. After production operations begin, the engineer will assist overseeing much of the composite fabrication and assembly and work on process improvement and production optimization using lean processes and tools.

    Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years' experience in lieu of formal education. Experience with aircraft composites fabrication and assembly required. FAA approved Airframe and Powerplant license (A&P License) a plus. Experience with aircraft systems integration, installation, and assembly a plus. Knowledge of lean manufacturing philosophies and tools. Excellent verbal and written communication skills. Excellent interpersonal and coaching skills. Ability to interact with all levels of the organization. Excellent organizational skills and problem-solving skills. Strong team player. Excellent computer skills, word, excel, MS Project and Powerpoint. CAD experience (CATIA V5 preferred). GD&T skills through experience and/or formal training. Knowledge and experience with AS9100 a plus. Experience with manufacturing based ERP systems a plus.
The Structures Company LLC is an AA/EOE

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3097-3081-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-07-20
Input Date: 03/24/2022
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Masking Prep Technician

Description:
PDS Tech is seeking Masking Prep Technicians for open positions in Opa Locka FL

Primary Responsibilities
  • Prepare parts by masking or stop-off for plating, sandblasting.
  • Wax parts for plating, perform alodine, brush cad, cad strip & passivation
  • Sand blast parts for plating (chrome, nickel, cadmium and nital etch)
  • Load and unload parts in ovens, documenting time and date of each operation

Basic Qualifications:
  • HS Diploma. In the absence of an HS diploma or GED
  • Must be a U.S. Person/Permanent Resident “Green Card” holder

Preferred Qualifications:

  • Basic computer skills

     
Job Number: 2110135485
Job Location: Opa Locka, FL
Duration: 12 months
Input Date: 05/05/2022
Last Updated: 08/18/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: sdavis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pyp3QAC&URLSource=cjhunter

Mechanical Design Engineer

Description:

General Duties: Responsible for developing installation requirements, technical information, airframe production installation/fabrication drawings, engineering instructions, and related production guidance materials as it pertains to the mechanical and structural aspects of a modification program.

Essential Job Functions:

    Proficient in engineering design for aircraft modification programs; Proficient in designing details, assemblies, and installation drawings; Develop 3-D models and 2-D drawings to support the installation of mechanical and structural provisions; Capable of leading complex design task; Participate in engineering design feasibility studies; Participate in creation of stress analysis reports; Participate in internal design reviews;

Skills and Experience:

    Two (2) years or more of aerospace engineering or design experience; Familiar with 3D CAD modeling and drafting software (SOLIDWORKS required), and FEA (NASTRAN or AutoCad preferred); Proficient with MS Office.

Education:

2+ years of aircraft design experience.

Must have knowledge of SolidWorks as a drafting tool.

They will be updating aircraft structural models based on analysis provided by Stress Engineers.

Must be capable of selecting materials (from a short list of allowable aluminum alloys) appropriate to meet or exceed the required material properties defined by the stress analysis.

Must be able to calculate edge and pitch distances for each fastener drawing update.

Working in Oklahoma City is necessary.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 1184-1187-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-02-18
Input Date: 12/05/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Mechanical Engineers

Description:
3D CAD, FEA a plus

Check out our website at www.advancedtechno.com
 
Job Location: Midwest/Southeast
Input Date: 01/24/2022
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: apelosi@advancedtechno.com
Website: www.advancedtechno.com

Mechanical System Design 2

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs detail design development and modification of mechanical and fluid system installations. Performs spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under general supervision.

Responsibilities:
Support the design, analysis, test, and integration of air vehicle subsystems, including but not limited to:
o Landing gear, Steering, Braking, Flight control actuation, Hydraulic systems, Launch and recovery, Payload doors, Environment control system ECS, Ground service equipment - GSE
Support definition of requirements for air vehicle subsystems.
Manage functional and physical interfaces between vehicle subsystems and the vehicle.
Performs analysis, modeling, and simulation to verify subsystems and components meet requirements.
Support execution of component, subsystem, and system-level testing, including generating test plans and procedures, test execution, and analysis of test results.
Communicates information about vehicle subsystem design, requirements, and performance between the design team, management, customer, subcontractors, and vendors.
Minimum Requirements
Minimum of B.S. in mechanical or aerospace engineering (or related STEM discipline) plus 2+ years of relevant experience (or equivalent combination of technical education and experience).
Demonstrated expertise in development of aerospace vehicle subsystems.
Experience with CAD software (CATIA V5 preferred).
Excellent written and communication skills.
Must be a U.S. Person.
Desired Requirements
Experience leading the development of aerospace systems, from conceptual design through production.
Project management experience.
Experience with system engineering processes, including but not limited to requirements development, system safety analysis (FHA, FTA, FMEA development), and reliability analysis.
Experience with finite element analysis, multi-body dynamics analysis, and/or thermal analysis.
Hands-on experience working with machine shops, specifying fasteners, bearings, and other hardware, integrating prototype aircraft, and conducting performance tests.

Physical Requirements
On-site/Hybrid in Manassas, VA - preferred
On-site/Hybrid in Cambridge, MA - acceptable

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2251-2248-11534
Job Location: Manassas VA
Per Diem: --
Overtime: --
Start Date: 2022-04-25
Input Date: 11/24/2021
Last Updated: 08/18/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com