Job Search Results

414 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/09/19 Sunday 03:14PM Pacific Time by ContractJobHunter. )

Listings 1 - 414

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
12 Mechanical Design Engineers Needed w/Solidworks

Description:
Must have knowledge of SolidWorks as a drafting tool. The ME’s will be updating aircraft structural models based on analysis provided by Stress Engineers. Must be capable of selecting materials (from a short list of allowable aluminum alloys) appropriate to meet or exceed the required material properties defined by the stress analysis. ME will need to calculate edge and pitch distances for each fastener drawing update. Working in Oklahoma City is necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 483
Job Location: Oklahoma City, OK
Rate: $58-$65/Hr. **DOE**
Per Diem: Possible
Duration: 3-6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 07/06/2021
Last Updated: 08/26/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Analysis Engineers Needed

Description:
• Must have experience analyzing primary aircraft structures.
• Composites/Metallic experience
• MUST be able to do hand calculations to improve structure
• NO test or software experience needed.
• This is converting old production line aircraft drawings to UG NX/CAD. There will be several other projects backing this up.
• Must be US Citizen



The Structures Company LLC is an AA/EOE.
 
Job Number: 493
Job Location: Vero Beach, FL
Rate: $75-$80/Hr. **DOE**
Per Diem: Yes
Overtime: NO
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Mechanical / Airframe Designers Needed - NX

Description:
• Light aircraft experience modeling and drawings starting from Mylar and hand drawn.
• Must have experience with NX and TeamCenter 13
• Good communication and ability to work well in an IPT with stress, tooling, production
• Must be US Citizen


The Structures Company LLC is an AA/EOE.
 
Job Number: 492
Job Location: Vero Beach, FL
Rate: $55-$65/Hr. **DOE**
Per Diem: Yes
Overtime: NO
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/08/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 09/18/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

4 Mechanical Systems Design Engineers Needed

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Number: 491
Job Location: Greensboro, NC
Rate: $60-$66/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year +
Start Date: 4-6 Weeks
Input Date: 07/12/2021
Last Updated: 09/18/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/18/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 08/17/2021
Last Updated: 09/18/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 09/18/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

8 Electrical Engineers Needed w/ AutoCAD

Description:
• Experience with AutoCAD
• Must have aircraft experience
• Experience with modification special mission work, radio integration and sensor integration.
• Must be US Citizens




The Structures Company LLC is an AA/EOE.
 
Job Number: 486
Job Location: Denver, CO
Per Diem: Possible
Duration: 6 Months - Possibly Longer
Start Date: ASAP
Input Date: 08/16/2021
Last Updated: 09/18/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
8 Stress Engineers Needed

Description:
Description:
Must have previous experience performing stress analysis on aircraft airframes. Stress Engineer must be knowledgeable in performing Stress calculations by hand using methods defined in “Analysis and Design of Flight Vehicle Structures” by Elmer Bruhn or “Airframe Stress Analysis and Sizing” by Michael Niu since these methodologies are the basis for FAA certification evidence. Working in Oklahoma City is necessary.




The Structures Company LLC is an AA/EOE.
 
Job Number: 495
Job Location: Oklahoma City, OK
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 3-6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 07/19/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

A&P Aircraft Technician

Description:
PDS Tech is currently recruiting for A&P Mechanics to work in Greensboro, NC!

The Aircraft Technician, GSO Service Center works within an established FAR 145 Repair Station and is responsible for assigned maintenance tasks and associated inspections, functional/operational checks, and troubleshooting affected aircraft systems.
  • Performs scheduled and unscheduled inspections, maintenance, and repair of airframe and powerplant systems and components per acceptable methods, techniques, and practices.
  • Documents work performed in accordance with Regulatory and Repair Station/Quality Manual policies and procedures.
  • Demonstrates proficiency with the methods, techniques, practices, tools, and equipment used during aircraft maintenance.
  • Identifies, protects, and preserves piece parts and articles undergoing maintenance in accordance with RSM/QCM and company policies and procedures.
  • Assures parts, products and materials that are installed meet regulatory requirements.
  • Performs assigned work in a safe effective manner while practicing good housekeeping in accordance with company and regulatory requirements.
  • Provides detailed turnovers when maintenance is left unfinished prior to shift changes

Education, Work Experience, Certification and/or Licensure:
  • High School degree or equivalent required.
  • Experience in FAR Part 145 Repair Station environment maintaining general and/or business/corporate aviation aircraft.
  • A&P Certification required in accordance with 14 CFR Part 65 from a FAR Part 147 School.
  • Current passport and driver's license or ability to obtain both.
  • Experience with 14 CFR Part 43 required.
  • Familiarization with 14 CFR Parts 91,135, and 145 preferred.


Knowledge, Skills and Abilities:

  • Working knowledge of maintenance software (i.e. Quantum, Corridor, and/or SAP), Windows operating systems and Microsoft office products.
  • Thorough knowledge of aircraft maintenance requirements and inspection procedures and practices.
  • Excellent oral and written communication skills.
  • Strong attention to detail and accuracy.
  • Ability to work under pressure including time constraints and challenging situations.
  • Ability to read work orders, blueprints, diagrams, manuals and process specifications, follow sequence of planned operations.
  • Ability to work extended hours and travel to off-site locations requiring overnight stays with little notice as required.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 50 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing 50 lbs. or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment; people movers etc.), as required by job duties.

 
Job Number: 2110126992
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 06/23/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tim Burkart
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PaHoQAK&URLSource=cjhunter

A&P Mechanic

Description:
PDS Tech is seeking A&P Mechanics in Newburgh, NY.
In your role, you will:

  • Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems.
  • Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft.
  • Required to tow and move aircraft during the performance of maintenance duties.
  • Assists in the cleaning of parts and components during the repair and assembly of aircraft.
  • Performs other tasks and duties associated with the aircraft operation


 

 

 


EDUCATION: • High school education or equivalent required • A&P License is required. • Experience or working knowledge of mechanical devices. Prefer basic knowledge of aircraft systems.

Experience on mechanical repair of vehicles, preferably aircraft –through technical training, apprenticeship, schooling, or similar experience is preferred.

Must be able to obtain and maintain an airport security badge through the local airport authority, if applicable.
 
 
Job Number: 2110124651
Job Location: Newburgh, NY
Duration: 3 months
Input Date: 04/06/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PSXoQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
An A&P Mechanic job in Fort Worth, TX is currently available through Belcan. If you are interested in career growth, company stability with a ton of learning opportunity this is the job for you. In this role, you will be responsible to carry out assigned tasks, in accordance with the applicable maintenance manual, ensure maintenance operations are performed in the appropriate sequence as determined by the application maintenance data. To be considered for this role, you will need to have been a licensed mechanic for at least 1 year with 10-15 years of experience or 5-6 years experience with Falcon and Gulfstream aircraft.

JOB TITLE Job duties:

* Ensure that inspections are requested in an orderly and timely manner, and that the maintenance activities are performed according to the appropriate maintenance data.
* Ensure that tools and equipment used to make airworthiness determinations are labeled as calibrated and are within date limits in accordance with the manual
* Complete the appropriate paper work accurately
* Must have A&P License
* Minimum 1 year experience and have FAA Airframe rating
* Or 3 years minimum experience with Falcon 50, 90, 2000 and/or IAI G100, G150 G200 GIV
* Must have at least 10 years experience or 5-6 years experience with Falcon and Gulfstream aircraft.


If you are interested in this A&P Mechanic job please apply via the apply now link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity

 
Job Number: 312177
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/06/2021
Last Updated: 08/03/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

A&P Mechanics - Secret Clearance (S-92 / Blackhawk experience)

Description:
PDS Tech is seeking A&P Mechanics with Secret Clearance and S-92 / Blackhawk experience for open positions in Owego NY

The ideal candidate will assist in the planning for accomplishing periodic Preventative Maintenance and Inspections

Requirements:
  • A&P Mechanic with S-92 / Blackhawk experience
  • Must have rotary aircraft structures experience preferably on Sikorsky products


The ideal candidate will:

  • Establish trends for overhaul and major repairs needed for planning and scheduling
  • Identify unscheduled maintenance plans and avoidances
  • Address stocking of maintenance spares required to timely maintain common fleet
    component failures
  • Implement plans for correction of known discrepancies categorized into; immediate
    action, on availability of parts, and on next planned maintenance.
  • Provide hands-on troubleshooting, requisitioning of repair parts for component failures found in troubleshooting, and installation of corrected components
  • Provide on-the-spot hands-on expertise needed to resolve technical problems
    incidental to the operation of aircraft
  • Establish best approach for corrosion prevention techniques
    Provide end-to-end supply chain review ensuring cost effective options are made available for customers' consideration of stocks and repairs
  • Improve readiness with test, measurement, and diagnostic equipment required for
    ensuring uncompromising quality
  • Execute VH-92A Presidential Helicopter Program production structural modifications
  • Provide other ad-hoc production support as required


 
Job Number: 2110132620
Job Location: Owego, NY
Duration: 15 months
Input Date: 06/09/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqDRQA0&URLSource=cjhunter

Advanced Composite Tech I

Description:
PDS is seeking a Advance Composite Tech I for an open position in Savannah, GA.


Position Purpose:



Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment.

Principal Duties and Responsibilities:

Essential Functions: 1. Manufacture composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations. 4. Check all work and ensure a defect free assembly prior to inspection. 5. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 6. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 7. Support Lean activities.

Additional Functions:
1. Perform other duties as assigned.
 


    Education and Experience Requirements:
High School graduate or GED. Basic computer skills. One (1) year related composite experience. Ability to work with composite resins and materials. Requires ability to read a interpret blueprints. Read and interpret 6" scale.
 





    Unique Skills:



    Must be familiar with GAC Composite Fabrication. Solumina experience preferred.



     



    Other Requirements:
    1. Must be able to meet the physical requirements of the position.
    2. Must be able to work any shift.


     
    Job Number: 2110124992
    Job Location: Savannah, GA
    Per Diem: No
    Duration: 6 months
    Input Date: 02/12/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PTjqQAG&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aerospace Design/Material Compliance Engineer, Fort Worth, TX

    Description:
    Design/Material Compliance Engineer, Fort Worth, TX
    JR-024656


    Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
    With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

    Job Description

    Scope of Work:

    • Responsible for completing full material disclosures for purposes of reporting hazardous chemical content to relevant global environmental regulations and customers as necessary
    • Refer to the material specification, bill of material and engineering drawings to capture the relevant information (materials, Chemical finish, organic finish, finishing processes etc) to the reporting template (excel/ customer proprietary tool).
    • Responsible for aiding in any specific requests from customers for environmental reports or substance declarations as necessary.
    • Calculate volume and density of individual parts and assemblies in Catia.
    • Create 3d models and assemblies in Catia as required.
    • Update process documents as required in word/ customer proprietary tool.

    Skills Required:

    • Read and interpret aircraft engineering drawings.
    • Knowledge of product finish process, manufacturing processes.
    • Familiarity with REACH regulations and SVHC compliance is a plus.
    • Working Knowledge in Catia V4/V5 /V6
    • Good interpersonal and communication skills.
    • PC proficiency in MSWord, Excel, PowerPoint, and Outlook is required.

    Education:
    • Associate Degree in a Technical field preferred or some advanced training in lieu of degree with experience

    Years of Experience: 3+ years in engineering Industry. Experience in Aerospace will be a plus.
    Citizenship: US Person

    Skills & Experience
    Catia, Manufacturing Process, Material Content Analysis
    Cyient is an Equal Opportunity Employer.

    Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.


















    APPLICATION URL LINK:


    https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Design-Material-Compliance-Engineer_JR-024656
     
    Job Number: JR-024656
    Job Location: Fort Worth, TX
    Input Date: 07/19/2021
    Firm Name: CYIENT
    Address: 1401 NOLAN RYAN EXPY
    City, State: ARLINGTON, TX 76011
    Website: www.cyient.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aerospace Engine Control System Bench Test - Lead and Contributing Engineers

    Description:
    ABOUT THE JOB:
    Seeking lead and contributing engineers for aerospace engine control system bench test development in support of system verification testing for a new aircraft propulsion turbine engine control unit design. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the system verification test development process.

    REQUIRED SKILLS:
    • Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
    • 7+ years aerospace engineering experience
    • Aerospace controls product experience
    • System test bench verification experience
    • Knowledge of ARP4754A and DO-178 certification guidelines
    • Experience performing test data post processing and analysis
    • Experience authoring system test plans and procedures
    • Background in control system engineering and integration
    • Has a disciplined requirements-based engineering approach to system verification
    • Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
    • Ability to manage a variety of complicated tasks, situations, and people

    PREFERRED SKILLS:
    • For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
    • For a lead engineer role, demonstrated history of guiding small engineering teams through the systems verification process
    • Propulsion or APU turbine engine control system verification test development
    • Experience with Rational ClearCase, ClearQuest, and DOORS

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: 12-36 months
    Start Date: ASAP
    Input Date: 07/02/2021
    Last Updated: 07/13/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aerospace Engine LRU System Development - Lead and Contributing Engineers

    Description:
    ABOUT THE JOB:
    Seeking lead and contributing engineers for aerospace engine LRU development for a new aircraft propulsion turbine design including engine health monitoring system and torque sensing functions. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the development process.

    REQUIRED SKILLS:
    • Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
    • 7+ years aerospace engineering experience
    • Knowledge of ARP4754A and experience with model-based system development and certification
    • Effective coordination and communication with:
    o Systems engineering teams
    o Multi-disciplinary team members
    o Internal and External project management organizations
    • Experience in System requirements development
    • Experience in Control system engineering and integration
    • Has a disciplined requirements-based engineering approach to system design, and demonstrates the following skills:
    o Requirements analysis and decomposition
    o Requirements validation
    o Change management
    • Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
    • Ability to manage a variety of complicated tasks, situations, and people

    PREFERRED SKILLS:
    • For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
    • For a lead engineer role, demonstrated history of guiding small engineering teams through the development process
    Propulsion or APU turbine engine control system development
    • Engine Health Monitoring (EHM) system experience
    • Torque sensing system experience
    • Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
    • Experience with electro-mechanical components used in control systems, and interfacing those components to a controller
    • Knowledge of DO-178 certification guidelines
    • Experience working with component suppliers to refine component requirements/specifications, and to develop and approve qualification plans
    • Experience with Rational ClearCase, ClearQuest and DOORS

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: 12-36 months
    Start Date: ASAP
    Input Date: 07/02/2021
    Last Updated: 07/13/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airborne Maintenance System - Senior System Designer- Aerospace - China.

    Description:
    Airborne Maintenance System -  Senior System Designer - Aerospace - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Airborne Maintenance Systems Design.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • Masters Degree in Computing, Communications  Electronics,  Electrical  Control.
    • Have experience in health monitoring, fault diagnosis or related system development.
    • Understand the development process of avionics system / subsystem of civil aircraft.
    • Have strong research ability and be able to identify the development trend of technology.
    • Have team management experience, strong sense of responsibility, good communication skills and team spirit, positive working attitude, optimistic.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
     
    Job Number: BH-384
    Job Location: China, China
    Rate: Remuneration dependant upon experience
    Per Diem: --
    Overtime: --
    Duration: 1-3 Years
    Start Date: 06/28/2021
    Input Date: 06/29/2021
    Last Updated: 07/27/2021
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    Aircraft Assembly Technician-Vertical Lift

    Description:
    Chipton-Ross is seeking 20 Aircraft Assembly Technician's-Vertical Lift for an opportunity in Mesa, AZ.

    RESPONSIBILITIES:
    Experience in assembly, disassembly, install, test and troubleshooting of mechanical and electrical assemblies and sub-assemblies on Apache Longbow Helicopters.
    Follow computer based and other specific processes and systems, including manufacturing planning and blueprints, as well as other forms of both written and oral instructions.
    Mechanical, electrical/avionics, sheet metal or composites work on Apache Longbow Helicopters.
    Follow specific tool control, FOD (Foreign Object, Debris) control and safety guidelines and policies

    REQUIRED EXPERIENCE:
    Minimum of 1 year of experience with aircraft assembly processes.
    Experience reading and interpreting assembly instructions or drawings.

    PREFERRED EXPERIENCE:
    Prefer specific Apache Longbow knowledge in systems such as Hydraulics, Flight Controls, Rigs, Fuel, Environmental Control Systems, Avionics, Wire Harness Installation and routing, Fairings, Brakes.
    A & P License preferred.

    EDUCATION:
    High school or Accredited GED

    FULL TIME/FIRST SHIFT
    WORK HOURS: 5:00 AM - 3:30 PM

    ADDITIONAL INFORMATION:
    Need to be open to potential extended hours and/or various work shifts. This position does requires steel toe safety shoes.


     
    Job Number: 192451
    Job Location: Mesa, AZ
    Rate: $DOE
    Duration: 12 Months
    Input Date: 07/07/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Andrew Craft
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: acraft@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Assembly Technician-Vertical Lift

    Description:
    Aircraft Assembly Technician-Vertical Lift

    Job ID # 2021-13673

    Contract Opportunity

    Location: Mesa, AZ

    Industry: Aerospace & Defense

    Minimum Education: High School Diploma/GED

     

    What You’ll Do:

    Follow computer based and other specific processes and systems, including manufacturing planning and blueprints, as well as other forms of both written and oral instructions.
    Mechanical, electrical/avionics, sheet metal or composites work on Apache Longbow Helicopters.
    Follow specific tool control, FOD (Foreign Object, Debris) control and safety guidelines and policies.

    What You’ll Need:

    Experience in assembly, disassembly, install, test and troubleshooting of mechanical and electrical assemblies and sub-assemblies on Apache Longbow Helicopters.
    Minimum of 1 year of experience with aircraft assembly processes.
    Experience reading and interpreting assembly instructions or drawings.
    Preferred (Desired) Qualifications:
    Prefer specific Apache Longbow knowledge in systems such as Hydraulics, Flight Controls, Rigs, Fuel, Environmental Control Systems, Avionics, Wire Harness Installation and routing, Fairings, Brakes.
    A & P License preferred

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.




    Education & Experience:

    High School Diploma/GED

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-13673
    Job Location: Mesa, AZ
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 12 Months
    Input Date: 07/08/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Assembly Technicians

    Description:
    STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

    Position Summary:

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

     Job Duties:
    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
    Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
    Makes continuity checks on work in process and completed.
    May conduct quality inspections on processing line in accordance with quality specifications.
    May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
    Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
    Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
    Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
    Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
    Completes work package documentation as required by FAA and/or repair station manual.
    Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
    Essential Knowledge, Skills & Abilities:

    Education: 

    High School/ GED
    A&P and mechanical/electrical experience a plus
    Structures experience a plus.

    Experience: 

    A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
    Knowledge, Skills & Abilities:
    Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
    Must be able to fabricate parts.
    Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
    Repair body or structure of aircraft according to specifications.
    Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
    Be proficient in the usage of air powered hand tools and related equipment.
    Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
    Ability to work different shifts and flexible hours if required.
    Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    Working Conditions / Environment/  Special Requirements:
    Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    Ability to work flexible hours and different shifts if required
    Employees will be subject to the random drug and alcohol testing under FAA regulations
    About STS Technical Services:

    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.

    #ZR
     
    Job Number: 37807
    Job Location: Melbourne, FL
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Jannely Castro
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Avionics Technicians

    Description:
    STS Aviation Services is hiring Aircraft Avionics Technicians in Melbourne, Florida.

    Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

    Job Duties:
    The workload is primarily CRJ C Checks, A320 C Checks as well as a variety of other Installation and Modification programs scheduled to come in over the next year – including WiFi installs, Cockpit Mods, Interior Reconfigurations to name a few.
    Qualifications:
    The minimum experience requirements are no less than 24 months of applicable experience on Commercial and Large Regional aircraft Repair/Modification/Overhaul.
    All technicians must be given the STS Recruiting A&P test or Sheet Metal Test during the screening process, before the candidate is assigned – with a minimum of a 70% score being required for the candidate to be assigned.
    The technicians must bring a full set of applicable tools with them on their scheduled start date.
    Bonus Information:
    $500 travel allowance for those technicians who qualify, tied to 90 day stay.
    $500 Referral Fee for anyone the candidate refers, who stays 60 days
    Authorization:
    All candidates must currently be authorized to work in the United States.
    About STS Aviation Services:

    STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

    To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

    #ZR
     
    Job Number: 37938
    Job Location: Melbourne, FL
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Keith Russo
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Aircraft Machinist D (Machining)

    Description:
    Chipton-Ross is seeking 2 Aircraft Machinist D's (Machining) for an opportunity in New Orleans, LA.

    RESPONSIBILITIES:
    Works with technical counterparts and others to develop solutions to complex out of sequence emergent production machining challenges. Develops and revises Machine Control Data (MCD) and geometry. Assists in defining methods of operations and sequences to meet company and customer objectives. Interprets high level requirements to successfully complete complex non-routine, machining operations. Mentors other machinists in resolving issues and completing job responsibilities.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS: 6:00AM-2:30PM
    Full-Time/First Shift

    MISCELLANEOUS:
    This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
     
    Job Number: 192428
    Job Location: New Orleans, LA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 07/07/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Juan Saldarriaga
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jsaldarriaga@chiptonross.com
    Website: www.chiptonross.com

    Aircraft Maintenance and Repair

    Description:
    PDS tech Inc is seeking an Aircraft Maintenance and Repair in Coatesvile, PA.

    Summary:

    • Troubleshoots, repairs and services aircraft and engine systems, installation of critical dynamic components (gear boxes, driveshafts, and rotor blades), control rods and landing gear. Must be able to use and interpret various types of test equipment and work from maintenance manuals and wiring diagrams. Will be responsible for performing various inspections and appropriate maintenance documentation. A&P license required.

      Ensure strict compliance with the Tool Control Program and comply with and participate in the FOD program

    REQUIRED SKILLS:

    1. Strong communication skills - written and verbal

    2. Must be detail oriented and able to multi-task

    3. Strong problem solving and evaluations skills

    4. Strong organizational skills

    5. Must be proficient in using a computer and in Microsoft Office Programs

    6. Ability to work with minimal supervision, and take direction from Lead and Manager



    OTHER REQUIREMENTS:

    1. This is a safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol Program - screening and quarterly random selections 2. If your Company's current FAA drug & Alcohol Program certificate is not already on file please send with acceptance of award.

    3. A compliance letter will need to be sent prior to start confirming your contractor's inclusion in this program.

    4. Must be a US citizen or Permanent Resident Alien

    5. Legality: Must have the ability to speak, write and read in the English language

    6. Be capable of working overtime and assigned shift.

    7. Be capable of lifting a minimum of 25 lbs.



    EDUCATION AND EXPERIENCE:

    1. High School Diploma or equivalent (required), Technical school certification and/or U.S. Military experience (preferred).

    2. A&P license required

    3. 3+ years of recent experience minimum; and/or industry experience working on rotorcraft
     
    Job Number: 2110125377
    Job Location: Coatesville, PA
    Duration: 12 months
    Input Date: 06/24/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sherrita Davis
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PUvxQAG&URLSource=cjhunter

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking 80 Aircraft Mechanic II's located in San Antonio, TX.

    RESPONSIBILITIES:
    Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes
    Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
    Use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
    A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
    The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
    Maintain necessary certifications, licenses and permits as required for assigned work.

    REQUIRED EXPERIENCE:
    The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
    Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

    Experience working as an aircraft mechanic
    Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; Mission requirements and / or workload may require both scheduled and unscheduled overtime)

    PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):

    Currently possess an FAA A&P License or Military Technical School equivalent
    Computer skills experience including but not limited to: aircraft related systems and basic Microsoft Suite software (i.e. Word, Excel)
    Experience reading and understanding engineering drawings, blueprints, schematics, and specifications

    EDUCATION:
    Accredited High School Diploma or Equivalent

    WORK HOURS:
    Full-Time/First Shift
    6:00 AM - 2:30PM
     
    Job Number: 190853
    Job Location: San Antonio, TX
    Rate: $DOE
    Duration: 6 months
    Input Date: 05/04/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Brent Sizemore
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bsizemore@chiptonross.com
    Website: www.chiptonross.com

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking 80 Aircraft Mechanic II's located in San Antonio, TX.

    RESPONSIBILITIES:
    Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes
    Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
    Use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
    A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
    The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
    Maintain necessary certifications, licenses and permits as required for assigned work.

    REQUIRED EXPERIENCE:
    The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
    Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

    Experience working as an aircraft mechanic
    Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; Mission requirements and / or workload may require both scheduled and unscheduled overtime)

    PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):

    Currently possess an FAA A&P License or Military Technical School equivalent
    Computer skills experience including but not limited to: aircraft related systems and basic Microsoft Suite software (i.e. Word, Excel)
    Experience reading and understanding engineering drawings, blueprints, schematics, and specifications

    EDUCATION:
    Accredited High School Diploma or Equivalent

    WORK HOURS:
    Full-Time/First Shift
    6:00 AM - 2:30PM
     
    Job Number: 190852
    Job Location: San Antonio, TX
    Rate: $DOE
    Duration: 6 months
    Input Date: 04/23/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Brent Sizemore
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bsizemore@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Painter

    Description:
    Are you a strong painter looking to join the aviation industry?
    Join one of the most trusted aviation company that offers top skill and growth.

    Acara Solutions is seeking some Painters for one of our top dynamic clients specializing in luxury private jets for worldwide VIP clientele.

    The Painters will perform various duties involving prep, painting, and coating of the aircrafts.

    The ideal candidate will have at least 3 years of painting experience in the automotive, marine, aircraft, or industrial industry. The candidate will be responsible for preparing surfaces to be painted or sealed as requested by the working instructions using abrasives, solvents, and brushes. Mixes, stirs, and thins paint or other coatings using spatulas or power mixing equipment. The ideal candidate would also have experience with spraying of base and top coating and sealant application.

    This company offers a career path in a growing industry focused on innovation, collaboration, and empowerment. The pay range starts at $17-23/hour DOE.

    If you have the experience and a desire to be a part of one of the largest aviation manufacturers, then apply today!

    Location: Melbourne FL 32935
    Pay Range: $17-23/hour DOE
    Hours: 1st shift (7-330PM) and 2nd Shift (330-12AM) Monday-Friday
    Job Type: Contract; potential temp to perm
    Desired Experience: Minimum 3 years of experience as a Painter
     
    Job Number: 486421
    Job Location: Melbourne, FL
    Rate: 17-23/hr
    Per Diem: NO
    Overtime: YES
    Duration: temp to direct
    Start Date: ASAP
    Input Date: 07/15/2021
    Firm Name: ACARA SOLUTIONS INC
    Attention: Megan Tates
    Address: 250 INTERNATIONAL DRIVE
    P O BOX 9057

    City, State: WILLIAMSVILLE, NY 14231-9057
    Website: www.acarasolutions.com

    Aircraft Performance Software Developer 3

    Description:
    Inconen is looking for an Aircraft Performance Software Developer 3 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Preference will be given to:
    - candidate with Computer Science degree with some exposure to aerospace, or
    - candidate with Aerospace degree with advanced programming skills
    - Advanced programming skills and experience with various programs including Matlab, Python, C, C++
    - DO-178 experience highly desired

    Preferred but not required:
    - EFB, SCAP experience
    - Aircraft Performance background
    - Experience with various programming paradigms including functional programming/object-oriented programming

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 14929
    Job Location: Savannah, GA
    Rate: $55.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/15/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Aircraft Performance Software Developer 4

    Description:
    PDS Tech is seeking an Aircraft Performance Software Developer 4 for an open position in Savannah, GA.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
     

    Education and Experience Requirements:



    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Unique Skills:



    - Preference will be given to:
    - candidate with Computer Science degree with some exposure to aerospace, or
    - candidate with Aerospace degree with advanced programming skills
    - Advanced programming skills and experience with various programs including Matlab, Python, C,
    C++
    - DO-178 experience highly desired
    - Preferred but not required:
    - EFB, SCAP experience
    - Aircraft Performance background
    - Experience with various programming paradigms including functional programming/object-oriented
    programming

    Other Requirements:



    • Advanced degree in engineering, or related curriculum preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline

     
    Job Number: 2110125145
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 02/15/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PUBTQA4&URLSource=cjhunter

    Aircraft Performance Software Developer 4

    Description:
    Inconen is looking for an Aircraft Performance Software Developer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Preference will be given to:
    - candidate with Computer Science degree with some exposure to aerospace, or
    - candidate with Aerospace degree with advanced programming skills
    - Advanced programming skills and experience with various programs including Matlab, Python, C, C++
    - DO-178 experience highly desired

    Preferred but not required:
    - EFB, SCAP experience
    - Aircraft Performance background
    - Experience with various programming paradigms including functional programming/object-oriented programming

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 14930
    Job Location: Savannah, GA
    Rate: $65.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/15/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Aircraft Product Integrity Tester / Inspector (2nd shift)

    Description:
    PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (2nd shift) for an open position in Coatesville PA

    The ideal candidate will:
    • Support and lead testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations.
    • Perform the inspection of demonstrator and production aircraft for functional operation and conformance to government and company standards and specifications.
    • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.


    The candidate may:

    • Perform preflight and post flight inspections in accordance with standard procedure on flight-proven aircraft.
    • Inspect any adjustments, repairs, or modifications made on the aircraft.
    • Monitor and verify quality in accordance with statistical process or other control procedures.

    A&P Licensure is strongly desired

     
    Job Number: 2010120746
    Job Location: Coatesville, PA
    Duration: 15 months
    Input Date: 06/07/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PCCFQA4&URLSource=cjhunter

    Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic)

    Description:
    PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic) for an open position in Coatesville PA

    The ideal candidate will:
    • Inspect aircraft and component parts for structural integrity using nondestructive inspection methods.
    • Interpret nondestructive inspection test results and provide information about defects to repair center.
    • Perform nondestructive inspection on structures, components, and systems.
    • Detect flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, and ultrasonic test equipment.
    • Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.
    • Perform the inspection of modification and production aircraft for functional operation and conformance to government and company standards and specifications.
    • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.
    • May perform pre-flight and post-flight inspections in accordance with standard procedure on flight-proven aircraft.
    • May inspect any adjustments, repairs, or modifications made on the aircraft.
    • Must be able to work in confined spaces, elevated platforms for an extended period of time.
    • Must be willing to work off-shifts as required.
    • Must be willing and able to lift 30 lbs.

    Basic Qualifications:
    • Documented proof of the minimum requirements for:
      • Level II in Fluorescent Penetrant
      • Level II Eddy Current
      • Level II Ultrasonic in accordance with NAS 410.

    • Basic Excel and MS Word Experience, ability to read blueprints.
       

    Desired Skills:

    • Any other level II NAS 410 Qualifications.
    • Airframe and Powerplant Certificate preferred.

     
    Job Number: 2110127910
    Job Location: Coatesville, PA
    Duration: 15 months
    Input Date: 05/20/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcwqQAC&URLSource=cjhunter

    Aircraft Stress Engineers

    Description:
    Nastran, Patran a plus
     
    Job Location: GA/WI
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structural Assembler-Vertical Lift

    Description:
    Aircraft Structural Assembler-Vertical Lift

    Job ID # 2021-13672

    Contract Opportunity

    Location: Mesa, AZ

    Industry: Aerospace & Defense

    Minimum Education: High School Diploma/GED

     

    What You’ll Do:

    Assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems. Identify nonconforming parts, conditions and manufacturing processes.
    Work with engineering to improve manufacturing processes.
    Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment.
    Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one Assembly to another as with fairings and the mating of major assemblies callouts, butt, station and water lines; blind pick up of hole locations for blank parts from existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
    Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
    Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
    Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gauges and scales.
    Report all non-conformances to manufacturing supervision or corrective action representative.
    Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
    Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
    Report on job status and restraints to coworkers and supervision;
    Identify production inefficiencies and suggests potential improvements to product or process.

    What You’ll Need:

    Knowledgeable and skilled in basic sheet metal, riveting, assembly methods and common shop practices.
    Knowledgeable and able to interpret and work from blueprints, sketches and written and verbal instructions.
    Knowledgeable and able to apply shop math.
    Knowledgeable and able to use computer systems for office and shop applications.
    Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    Able to complete and maintain all required training and certifications needed to do your job efficiently.
    Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education & Experience:

    High School Diploma/GED

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-13672
    Job Location: Mesa, AZ
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 12 Months
    Input Date: 07/08/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structures Mechanics

    Description:
    STS Technical Services is hiring Aircraft Structures Mechanics in Oscoda, Michigan.

    Job Description:

    The Aircraft Sheet Metal Mechanic repairs, fabricates, modifies, and installs sheet metal parts, items, and assemblies. Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, knowledge of tools and equipment required in the sheet metal trade, and knowledge of shop mathematics and principles.

    Job Responsibilities:
    Shoot and buck rivets to specifications following FAA guidelines
    Recognize differences in types of metals including structural strength and thickness
    Perform sheet metal bends to guidelines and specifications as dictated in normal aviation practices
    Remove existing rivets from aircraft structure
    Work with and around a variety of chemicals and follow all OSHA standards in regards to PPE
    Build components for aircraft applications using a variety of sheet metal materials
    Make decisions regarding how to make repairs and know what repairs can and can’t be done
    Understand and apply FAA standards
    Read blueprints to ensure build and modification completion, follow both written and verbal instructions
    Effectively document job completion paperwork
    Other duties as assigned
    Job Requirements:
    Valid FAA Airframe & Powerplant license strongly preferred
    Previous experience working with sheet metal, or completion of a technical school program in a similar field of study
    Must provide own tools
    Ability to use and effectively manager ERP program, time clock and company intranet
    Manage time to effectively meet company priorities
    Abilities:
    Crawl in and out of tight spaces
    Lay in a prone position for more than 4 hours
    Comfortably work at elevated heights of at least 40 feet for extended periods of time
    Lift balance, and carry 50 lbs.
    Work in enclosed hangars and exterior weather conditions
    Work in close proximity to other people
    Benefits:
    A $500 referral bonus if your referral works at least 60 days
    Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
    Overtime is offered in abundance
    If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
    Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
    A perfect landing place for veterans looking for a great career
    Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
    Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
    If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your backyard
    About STS Technical Services:

    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.

    #ZR
     
    Job Number: 36331
    Job Location: Oscoda, MI
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Mindy Paolini
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structures Technician

    Description:
    STS Technical Services is hiring Aircraft Structures Technicians in Nashville, Tennessee.

    Position Summary:

    Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

    Rates & Bonus:
    Our client is now paying $32/hr with a $2000.00 sign on bonus.
    Duties & Responsibilities:
    Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
    Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
    Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
    Performs serviceability tests on repairs using test equipment specified in technical manuals.
    Completes work package documentation by signing/stamping off after finishing all designated operations.
    Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
    Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
    Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
    Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
    Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
    Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
    Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
    Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
    Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
    Provide information and documentation for engineering requests.
    Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
    Qualifications:

    Education:

    High School/ GED
    A&P and / or structures experience a plus, or repairman’s certificate may substitute for A&P.

    Experience:

    Prefer at least 2 years experience.
    Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

    Knowledge, Skills & Abilities:

    Must be able to fabricate parts.
    Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
    Repair body or structure of aircraft according to specifications.
    Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
    Be proficient in the usage of air powered hand tools and related equipment.
    Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
    Ability to work different shifts and flexible hours if required.
    Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    Working Conditions / Environment / Special Requirements:
    Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
    Ability to work flexible hours and different shifts if required.
    Employees will be subject to the random drug and alcohol testing under FAA regulations.
    Valid Drivers License.
    Must be able to work in hot/Cold – Indoor/Outdoor.
    Must be able to lift up to 50 lbs unassisted.
    Must be able to do work above head.
    Must be able to work at heights.
    Must be able to work in confined spaces.
    Must be able to climb.
    About STS Technical Services:

    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.

    #ZR
     
    Job Number: 37622
    Job Location: Nashville, TN
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Celeste Rodriguez
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structures Technicians

    Description:
    STS Aviation Services is hiring Aircraft Structures Technicians in Melbourne, Florida.

    Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

    Requirements & Information:
    Candidates must have 30 months of previous experience on commercial and large regional aircraft with a background of repair/modification/overhaul.
    Previous experience performing C checks is preferred.
    Comparable military experience is acceptable.
    Candidates must have a valid driver's license.
    $500 travel allowance for those technicians who qualify; tied to 90-day stay.
    $200 referral fee for anyone the candidate refers who stays 60 days.
    Authorization:
    All candidates must currently be authorized to work in the United States.
    About STS Aviation Services:

    STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

    To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

    #ZR
     
    Job Number: 36451
    Job Location: Melbourne, FL
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Keith Russo
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structures/Sheet Metal Tech

    Description:
    Acara Solutions is seeking qualified Structures Technicians to support our customers aviation production business in Nashville, TN:

    Pay Rate: $26 - $32/hour DOE

    JOB DESCRIPTION


    Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
    Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
    Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
    Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM's) technical data, and work package instructions.
    Consults the Maintenance Lead if technical assistance is needed during the repair process.
    Inspects completed work before signing off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
    Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
    Completes work package documentation by signing/stamping after finishing all designated operations.
    Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
    Provides supervisor with performance statistics and other operational data, as requested.
    Properly accounts for time and materials used in all inspection and maintenance activities.
    Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.



    Working Conditions / Environment/ Special Requirements

    Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 'Respirator Protection' regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
    Ability to work flexible hours and different shifts if required.
     
    Job Number: 487368
    Job Location: Nashville, TN
    Rate: 26-32
    Per Diem: Possible
    Overtime: YES
    Duration: temp to direct
    Start Date: ASAP
    Input Date: 07/15/2021
    Firm Name: ACARA SOLUTIONS INC
    Attention: Megan Tates
    Address: 250 INTERNATIONAL DRIVE
    P O BOX 9057

    City, State: WILLIAMSVILLE, NY 14231-9057
    Website: www.acarasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe & Powerplant Mechanics

    Description:
    STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

    Job Duties & Requirements:
    A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
    Kalitta’s own fleet consists of 747s, 767s and 777s
    Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
    The job duties of an A&P mechanic vary from preventive maintenance to repairs
    A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
    Job duties may vary based on which part of the plane is being worked on
    A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
    An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
    A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
    Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
    A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
    An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
    Benefits:
    Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
    Overtime is offered in abundance
    If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
    Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
    A perfect landing place for veterans looking for a great career
    Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
    Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
    If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
    About STS Technical Services:

    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.

    #ZR
     
    Job Number: 36242
    Job Location: Oscoda, MI
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Kimberley Ayres
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe & Powerplant Technicians

    Description:
    STS Aviation Services is hiring Airframe & Powerplant Technicians in Melbourne, Florida.

    Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

    Requirements & Information:
    Candidates must have 30 months of previous experience on commercial and large regional aircraft with a background of repair/modification/overhaul.
    Previous experience performing C checks is preferred.
    Comparable military experience is acceptable.
    Candidates must have a current and valid A&P certifications along with a valid driver’s license.
    $500 travel allowance for those technicians who qualify; tied to a 90-day stay.
    $200 referral fee for anyone the candidate refers who stays 60 days.
    Authorization:
    All candidates must currently be authorized to work in the United States.
    About STS Aviation Services:

    STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

    To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

    #ZR
     
    Job Number: 36449
    Job Location: Melbourne, FL
    Input Date: 09/10/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Keith Russo
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector (1st Shift)

    Description:
    Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

    Unique Skills:
    1. Candidate must have Airframe and Powerplant license.

    Education and Experience Requirements:
    1. High School graduate/GED. Airframe and Powerplant License required.
    2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
    3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
    4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

    Position Purpose:
    1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
    2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
    3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
    4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
    5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
    6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
    7. Ensures aircraft/components are airworthy prior to any flight activities.
    8. Mentors technicians on effective documentation.

    Additional Functions:
    1. Communicates with management as required to identify work assignments and delivery schedules.
    2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
    3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
    4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    5. Performs other duties as required.

    Other Requirements:
    1. Strong written and verbal communication skills.
    2. Must be able to prioritize tasks.
    3. Strong computer skills.
    4. Must be able to work all shifts.
    5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
     
    Job Number: 15210
    Job Location: Savannah, GA
    Rate: $29.13 - $32.36/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/15/2021
    Last Updated: 07/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector (2nd Shift)

    Description:
    Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

    Unique Skills:
    1. Candidate must have Airframe and Powerplant license.

    Education and Experience Requirements:
    1. High School graduate/GED. Airframe and Powerplant License required.
    2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
    3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
    4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

    Position Purpose:
    1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
    2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
    3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
    4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
    5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
    6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
    7. Ensures aircraft/components are airworthy prior to any flight activities.
    8. Mentors technicians on effective documentation.

    Additional Functions:
    1. Communicates with management as required to identify work assignments and delivery schedules.
    2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
    3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
    4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    5. Performs other duties as required.

    Other Requirements:
    1. Strong written and verbal communication skills.
    2. Must be able to prioritize tasks.
    3. Strong computer skills.
    4. Must be able to work all shifts.
    5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
     
    Job Number: 15211
    Job Location: Savannah, GA
    Rate: $29.13 - $32.36/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/15/2021
    Last Updated: 08/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector (Weekend Day Shift)

    Description:
    Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

    Unique Skills:
    1. Candidate must have Airframe and Powerplant license.

    Education and Experience Requirements:
    1. High School graduate/GED. Airframe and Powerplant License required.
    2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
    3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
    4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

    Position Purpose:
    1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
    2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
    3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
    4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
    5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
    6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
    7. Ensures aircraft/components are airworthy prior to any flight activities.
    8. Mentors technicians on effective documentation.

    Additional Functions:
    1. Communicates with management as required to identify work assignments and delivery schedules.
    2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
    3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
    4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    5. Performs other duties as required.

    Other Requirements:
    1. Strong written and verbal communication skills.
    2. Must be able to prioritize tasks.
    3. Strong computer skills.
    4. Must be able to work all shifts.
    5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
     
    Job Number: 15212
    Job Location: Savannah, GA
    Rate: $29.13 - $32.36/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/15/2021
    Last Updated: 08/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector Sr.

    Description:
    Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Required A&P license and five years inspection.

    Education and Experience Requirements:
    High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

    Position Purpose:
    The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

    Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

    Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
     
    Job Number: 15529
    Job Location: Savannah, GA
    Rate: $32.63 - $36.25/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/15/2021
    Last Updated: 08/08/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airworthiness Inspector Sr. (2nd Shift)

    Description:
    Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Have Knowledge experimental aircraft inspection and conformity.

    Education and Experience Requirements:
    High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

    Position Purpose:
    The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

    Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

    Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
     
    Job Number: 15329
    Job Location: Savannah, GA
    Rate: $32.63 - $36.25/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/15/2021
    Last Updated: 07/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Assembler A

    Description:
    Chipton-Ross is seeking 4 Assembler A's located in Sylmar, CA.

    RESPONSIBILITIES:
    Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

    REQUIRED EXPERIENCE:
    - Computer literate
    - Must be able to read, write and speak English language

    Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.

    Safety
    Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances

    Safety shoes are required.
    Completely cover the toes, heels and top of your foot.
    Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric,
    Heels are less than 2 inches high and have heel base greater than 1 square inch.
    Soles are at least " thick

    EDUCATION:
    Accredited High School Diploma/GED

    FULL TIME/WORK HOURS:
    Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift

    Assignments may require contractors to change shifts and work frequent overtime.

    ADDITIONAL REQUIREMENTS:
    Eye exam required
     
    Job Number: 190706
    Job Location: Sylmar, CA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/19/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Emmanuel Morgan
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: emorgan@chiptonross.com
    Website: www.chiptonross.com

    Assembler A

    Description:
    Chipton-Ross is seeking 3 Assembler A's located in Sylmar, CA.

    RESPONSIBILITIES:
    Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

    REQUIRED EXPERIENCE:
    ***Manufacturing experience in semiconductor products, medical devices.
    -Intricate work on microscope
    -Handling fragile materials
    -Familiar with and has chemical usage experience
    -Vacuum systems

    EDUCATION:
    Accredited High School Diploma/GED

    FULL TIME/WORK HOURS:
    Must be available to work any shift:
    Shift: 1, 2 or 3
    Start Time: 1st: 6am, 2nd: 2pm, 3rd: 10pm
    End Time: 1st: 2:30am, 2nd: 10:30pm, 3rd: 6:30am

    ADDITIONAL REQUIREMENTS:
    Eye exam required
     
    Job Number: 189080
    Job Location: Sylmar, CA
    Rate: $DOE
    Duration: 9 months
    Input Date: 01/27/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Kristie Hardage
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: khardage@chiptonross.com
    Website: www.chiptonross.com

    Assembler D

    Description:
    Chipton-Ross is seeking a Assembler D for an opening in San Antonio, TX.

    RESPONSIBILITIES:
    Supporting 737 program.

    1. Perform production installations, maintenance*, preventative maintenance** and alterations*** on aircraft structure, systems and sub-systems, including electrical and avionics on standard or experimental certificated aircraft. Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

    2. Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures. Perform functions such as: Customer/FAA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. May perform Aviation Maintenance Technician tasks in order to obtain and maintain knowledge, skills and required certifications.

    ASSOCIATED DUTIES AND RESPONSIBILITIES:
    Use technical specifications, sketches, manuals, drawings, engineering instructions and FAA forms and publications to accomplish work assignment.
    Maintains Company and FAA required records and inspection forms.
    Maintain a safe, clean and organized work environment.
    Plan and organize the sequence of your own work package in such a way as to promote safe, efficient operation and meet predetermined schedules in a timely manner.
    Operate any and all types of information systems required to perform assigned tasks. Including but not limited to Company WEB based systems and Microsoft Office products.
    Interpret and perform to the requirements of airworthiness directives, service bulletins, service letters and other approved/accepted data.
    Apply applicable mathematical calculations to setup and use precision measuring tools, to measure gaps, heights, angles, hole diameters and depths.
    Maintain necessary certifications, licenses and permits as required for assigned work.
    As assigned, exchange information with suppliers, customers or other company representatives to explain or demonstrate operations, tests or difficulties.

    PREFERRED EXPERIENCE:
    737 field experience (preflight/post flight) with an avionics background proficient in testing/troubleshooting. Previous engine run experience on CFM type engines and/or flight line experience with an airline/military.. A&P license.


    EDUCATION:
    Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

    FULL TIME/FIRST SHIFT
    WORK HOURS: 5:30 AM - 2:30 PM

    MISCELLANEOUS:
    This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

    ADDITIONAL REQUIREMENTS:
    Candidates selected will attend a 3 week training course prior to working the floor.
     
    Job Number: 191111
    Job Location: San Antonio, TX
    Rate: $DOE
    Duration: 6 Months
    Input Date: 05/06/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Associate Buyer

    Description:

    PDS Tech is currently recruiting for an Associate Buyer to work in Greensboro, NC!



    The Associate Buyer is responsible for tactical procurement activities for indirect goods and services supporting business operations. Examples of indirect goods and services include manufacturing operation supplies, tools and equipment, personal protective equipment, health and safety services, buildings and grounds maintenance services, and office equipment and supplies.
     

    Duties and Responsibilities:



    • Work with internal stakeholders to understand business requirements and ensure compliance with company’s procurement policies.
    • Communicate quote requests and purchase requirements to suppliers.
    • Review purchase requisitions for accuracy.
    • Create and administer purchase orders.
    • Maintain accurate and organized purchasing files.
    • Negotiate with suppliers to obtain optimal pricing, performance, and delivery dates.
    • Resolve invoice discrepancies.
    • Prepare supporting documents and materials during the procurement process.
    • Compile supplier performance metrics (with feedback from internal stakeholders).
    • Assist procurement colleagues with research, presentations, reports, projects, and meetings.
    • Participate in continuous improvement activities for the department and company.


     



    Education, Work Experience, Certification and/or Licensure:



    • Bachelor’s Degree with a concentration in Supply Chain Management, Business Administration, or Finance is preferred; Management may elect to consider applicants with equivalent experience and/or a combination of experience/training/education in lieu of degree.
    • One or more years of experience relevant to Procurement or Supply Chain.


    Knowledge, Skills and Abilities:



    • Knowledge of procurement process.
    • Proficiency in Microsoft Office products.
    • Experience with an ERP system is preferred (for example, SAP).
    • Ability to work in a fast-paced, dynamic environment and balance multiple priorities.
    • Must be able to communicate effectively through all levels throughout an organization internally and external to the company.
    • Ability to work independently and within a team oriented environment.
    • Ability to research, analyze data, and present conclusions.
    • Travel for company business is not expected.


    Physical Requirements:





    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odor
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.



     


     
    Job Number: 2110134024
    Job Location: Greensboro, NC
    Duration: 12 months
    Input Date: 06/18/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PuIoQAK&URLSource=cjhunter

    Aviation Mechanics - Clearance

    Description:
    Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

    Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
    Several Openings For:
    • General Mechanic
    • Electrical
    • Structures
    • Avionics Tech
    • Quality Inspection
    • Supply Chain Specialist


    Great Opportunity for Ex-military/Exiting Military/ and Veterans
    Previous military experience a plus!


     
    Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
    Required- Minimum of 5 years' experience working on 747 platform.
    Tools: no tools required
    Location: San Antonio, Texas

    ***Current Security Top Secret Clearance required
    US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

    **submittal must reference Job ID number 1710063637

    Camille Zunker- czunker@pdstech.com
     
    Job Number: 1710063637
    Job Location: San Antonio, TX
    Duration: 12 months
    Input Date: 11/14/2020
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Camille Zunker
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 11/23/2020
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    Avionics Engineer

    Description:
    The Avionics Engineer reports to the Manager, Avionics Engineering and is responsible for the engineering data,
    instructions, documents, and technical support that economically ensures the safety, airworthiness, and reliability of aircraft within the following ATA chapter subjects: 22, 23, 24, 26, 28, 31, 33, 34, 45, 46, 77.

    Responsibilities:
    1. Issue instructions (EO’s) and documents to economically support operations and return aircraft to service in a
    safe, airworthy, and timely manner.
    2. Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for
    repairs, alterations, and modifications.
    3. Report on the status of projects and issues as directed.
    4. Update technical source documents as applicable to insure accuracy.
    5. Support integration of new and previously operated aircraft.
    6. Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside
    engineering departments; regulatory personnel; and other outside agencies.
    7. Participate in industry working groups, industry steering committees, industry meetings, and conferences.
    8. Review work of consultant, contract, and MRO Systems Engineers.

    Key Objectives (Metrics):
    1. Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness
    Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues.
    2. Develop product improvement modifications as directed by Reliability Indicators.
     
    Job Number: 87451200
    Job Location: KY
    Rate: Direct Salary
    Duration: Perm work
    Input Date: 07/13/2021
    Last Updated: 09/17/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    Avionics Engineer

    Description:
    Unique Skills:
    Avionics and/or Electrical system development and integration experience is required.
    Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
    Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
    Understanding of DO-160, DO-178 and DO-254 processes is preferred.
    System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
    ARP-4754A experience including requirements development, validation and verification is preferred.
    Experience with IBM DOORS or other requirements management database is preferred
    Bachelor's Degree in Engineering Required.
    10+ years of Avionics and/or Electrical Systems Engineering experience.
     
    Job Number: 374793
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 05/11/2021
    Last Updated: 09/18/2021
    Firm Name: CTS INTERNATIONAL
    Address: 160 NW GILMAN BLVD STE 250
    City, State: ISSAQUAH, WA 98027
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Avionics Engineer (16 needed)

    Description:
    Unique Skills:
    • Avionics and/or Electrical system development and integration experience is required.
    • Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
    • Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
    • Understanding of DO-160, DO-178 and DO-254 processes is preferred.
    • System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
    • ARP-4754A experience including requirements development, validation and verification is preferred.
    • Experience with IBM DOORS or other requirements management database is preferred.
     
    Job Number: 24-536
    Job Location: Savannah, GA
    Rate: $68-75/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/16/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: brandon@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Avionics Installer I

    Description:
    PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

    Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

    Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 

     

    Unique Skills:



    Must be willing to work any shift as required




    Education and Experience Requirements: 



    • High School diploma/GED.
    • General knowledge of applicable regulatory requirements and customer specifications.
    • Must know how to use a multimeter.
    • Entry level position.
    • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.


    Other Requirements:
    1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
    2. Ability to read and interpret basic blueprints and schematic diagrams.
    3. Strong written and verbal skills required.
    4. Computer skills and general software knowledge necessary.


     
    Job Number: 2110135450
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 07/22/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PyiMQAS&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics System with embedded DO-178 software Engineer

    Description:
    Position Requirements:
    Experience with embedded software development.
    Preference will be given for additional work in flight controls and/or avionics, embedded software development, and testing.

    • Experience with DO-178 Level A software or other embedded software development and testing is required.
    • Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
    • Experience with software Configuration Management
    • Experience with Primary Development Environment:
    o MathWorks MATLAB / Simulink
    o C/C++ code
    o C# test scripts
     
    Job Number: TX9851
    Job Location: FT Worth, TX
    Rate: 55-70hr.
    Per Diem: offered
    Overtime: Possible
    Duration: 12 Months
    Start Date: 2/3 wks from offer
    Input Date: 04/27/2021
    Last Updated: 09/10/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Systems Engineer

    Description:
    Job Summary:
    Responsible for the research, integration, testing, certification, and follow-on support of avionics and electrical components and software for general aviation aircraft. Work closely with equipment manufacturers, as well as other systems engineers and test pilots within the organization to establish and refine cross-system requirements for a highly integrated avionics system to help ensure a high quality end user experience with a safe, robust, and intuitive system design.

    Job Duties and Responsibilities (Essential Functions):
    Integration and testing of avionics and electrical systems and equipment, including:
    Requirements development and traceability
    Research and identification of potential solutions to design objectives
    Detail design and installation
    Test case development, execution, and troubleshooting on both bench and aircraft
    Coordinate design development and system integration with subcontractors
    Generate high quality reports and test plans that will be used to meet FAR Part 23 certification requirements
    Generate engineering documentation in accordance with company procedures to develop and maintain type design data for multiple aircraft

    Qualifications:
    To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The below requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    Required Education and/or Experience:
    Bachelor%u2019s degree in Electrical or Aerospace Engineering (or equivalent) required
    10-14 years experience with general aviation avionics development/integration
    Prior experience with the following is desirable:
    Integrated avionics systems (e.g. G1000, G3000, etc.)
    Avionics systems, software and hardware development processes (e.g. ARP-4754/DO-178/DO-254).
    Requirements traceability (DOORS, JAMA, etc.)
    Equipment environmental qualification (e.g. DO-160)
    Distinguishing Education and/or Experience:
    Previous certification experience with standards such as 14 CFR Part 23.
    %u2022 Process development experience (Six Sigma Green belt or others).
    Process mapping and deployment experience (VSM).
    Use of design tools such as CREO, MATLAB, VBA, or similar programs.
    Requirements Management tool experience (PTC Integrity, Doors, Jama, or equivalent).
    Change Management and Configuration Management tool experience (JIRA, Windchill, Clearquest, Clearcase, or equivalent).
    Pilot or Ground School experience preferred.

    Demonstrated Proficiencies/Skills/Abilities:
    Must be able to demonstrate the ability to read, write and speak the English language
    Ability to communicate technical knowledge in a clear and understandable manner
    Ability to work both independently and within a cross-functional team
    Ability to efficiently learn new skills and manage multiple tasks
    Use of lab equipment, such as oscilloscopes, signal generators, and spectrum analyzers
    Proficient with Microsoft Office (Outlook, Excel, PowerPoint, Word, Visio)
    Familiarity with Atlassian JIRA, PTC Windchill PDM, and PTC Creo tools preferred
     
    Job Location: REMOTE
    Rate: $65-$70/HR.
    Input Date: 07/19/2021
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Tracey Hill
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Website: www.jsginc.com

    Avionics Systems Engineers with DOORS, V&V, DO-160

    Description:
    Contract-Avionics/Power Engineer-REQ#167670 in Savannah, GA
    Skills:
    Avionics and/or Electrical system development and integration experience is required.
    Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
    Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
    Understanding of DO-160, DO-178 and DO-254 processes is preferred.
    System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
    ARP-4754A experience including requirements development, validation and verification is preferred.
    Experience with IBM DOORS or other requirements management database is preferred.
    ====================
    If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then call Peggy at 774-210-4108 Referrals appreciated!!
     
    Job Number: PL Avionics
    Job Location: Savannah, GA
    Rate: $65-75/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2-3 weeks
    Input Date: 05/11/2021
    Last Updated: 09/17/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Technician

    Description:
    An Avionics Technician job in Palo Alto, CA is currently accepting applications. This is a 2-month contract position with our key aviation client. In this role, you will be responsible for fabricate and install wire harnesses, and electronic systems, modules, and sub-assemblies on our industry leading eVTOL aircraft. You will be working in a fast-paced prototype development environment and will be expected to work as part of a team. To be considered for this role, you will have a High School Diploma or equivalent along with 5+ years of aviation experience performing modifications or aircraft wiring installs and 3+ years of experience as a harness technician working on application critical, high-complexity harnesses.

    Avionics Technician Job Responsibilities:
    * Install and fabricate wire harnesses through lay in, routing, dressing and connector termination using aerospace approved tooling and best practices.
    * Locate and install harness mounting hardware inclusive of click studs and clamps.
    * Able to work from both very detailed, released manufacturing drawings as well as development harnesses sketches.
    * Meet scheduled timelines and, in some cases, aggressive deadlines to have hardware ready for project milestones
    * Follow engineering designs and building concepts/prototypes assisting with testing, continuity checks and data collection.

    Avionics Technician Job Requirements:
    * High School Diploma or equivalent. A&P Certification preferred
    * 5+ years of aviation experience performing modifications or aircraft wiring installs
    * 3+ years of experience as a harness technician working on application critical, high-complexity harnesses
    * Underpinning knowledge of IPC 610/620
    * Demonstrated familiarity with AC43.13-B
    * Prior experience of bundling harness using techniques and methods including wax string lacing
    * Must have hands on experience using shop tools and calibrated aerospace tooling including torque wrenches, crimping and striping tools.
    * Must be able to lift 25 lbs unassisted
    * Must be able to distinguish colors
    * Prior work experience in the aerospace industry. Composite airframe preferred.
    * Successful experience in a fast paced prototype/design environment

    If you are interested in this Avionics Technician job in Palo Alto, CA, please apply via the 'apply now' link provided.

    Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
     
    Job Number: 314285
    Job Location: Palo Alto, CA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 07/15/2021
    Last Updated: 09/14/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    Avionics Technicians (A&P or FCC License) - 1st shift

    Description:
    PDS Tech is seeking Experienced Avionics Technicians with their A&P or FCC License for open positions in Coatesville PA

    The ideal candidate will:

    • Correctly manufacture, route, install, and repair electrical wiring to Engineering Drawings and Standards.
    • Read and interpret wiring diagrams and relevant Maintenance Manuals to install and test avionics and Helicopter Systems equipment as assigned
    • Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams
    • Properly build and accomplish final installs of complex wiring harnesses to Engineering Drawings and Standards.
    • Perform routine continuity and power checks to ensure harness integrity.
    • Troubleshoot electrical and avionics system on board aircraft and make necessary adjustments or repairs as assigned.
    • Route and clamp multiple wiring harnesses through airframe structure to both picture and Standards.
    • Ensure strict compliance with the Tool Control Program.
    • Comply with and participate in the FOD Program

    Required Skills
    • Ability to Read and interpret schematic, technical drawings, and wiring diagrams.
    • Proficient in the use of avionics tools to include insertion/removal tools correct crimpers.  Must be able to select proper pins, crimp tools, removal and insertion tools for proper terminations of wiring connectors.
    • Strong Communication skills; written and verbal
    • Must be Detail Oriented and able to Multi-Task
    • Strong problem solving and evaluation skills


    Education & Experience

    • High School Diploma or equivalent (required)
    • Technical School Certification or equivalent (required)
    • Valid A&P and/or FCC license (preferred)
    • 3 – 5 years recent experience minimum


    Requirements

    • This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
    • Must be a US citizen or Permanent Resident Alien
    • Must have the ability to speak, read, and write English language
    • Be capable of working overtime and any assigned shift.
    • Be capable of lifting a minimum of 25 lbs.


     
     
    Job Number: 2110129988
    Job Location: Coatesville, PA
    Duration: 15 months
    Input Date: 04/27/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PicYQAS&URLSource=cjhunter

    Avionics Technicians (A&P or FCC License) - 2nd shift

    Description:
    ​​​​​PDS Tech is seeking Experienced Avionics Technicians with their A&P or FCC Licenses for open positions in Coatesville PA

    The ideal candidate will:
    • Correctly manufacture, route, install, and repair electrical wiring to Engineering Drawings and Standards.
    • Read and interpret wiring diagrams and relevant Maintenance Manuals to install and test avionics and Helicopter Systems equipment as assigned
    • Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams
    • Properly build and accomplish final installs of complex wiring harnesses to Engineering Drawings and Standards.
    • Perform routine continuity and power checks to ensure harness integrity.
    • Troubleshoot electrical and avionics system on board aircraft and make necessary adjustments or repairs as assigned.
    • Route and clamp multiple wiring harnesses through airframe structure to both picture and Standards.
    • Ensure strict compliance with the Tool Control Program.
    • Comply with and participate in the FOD Program.

    Required Skills
    • Ability to Read and interpret schematic, technical drawings, and wiring diagrams.
    • Proficient in the use of avionics tools to include insertion/removal tools correct crimpers.  Must be able to select proper pins, crimp tools, removal and insertion tools for proper terminations of wiring connectors.
    • Strong Communication skills; written and verbal
    • Must be Detail Oriented and able to Multi-Task
    • Strong problem solving and evaluation skills


    Education & Experience

    • High School Diploma or equivalent (required)
    • Technical School Certification or equivalent (required)
    • Valid A&P and/or FCC license (preferred)
    • 3 – 5 years recent experience minimum


    Requirements

    • This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
    • Must be a US citizen or Permanent Resident Alien
    • Must have the ability to speak, read, and write English language
    • Be capable of working overtime and any assigned shift.
    • Be capable of lifting a minimum of 25 lbs.

     
    Job Number: 2110127318
    Job Location: Coatesville, PA
    Duration: 12 months
    Input Date: 07/19/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PbJZQA0&URLSource=cjhunter

    Avionics and Electrical Systems Installation Engineer

    Description:
    Minimum Requirements
    Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
    • Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
    • Strong computer, written and verbal communication skills required.
    • Time management skills are required to work multiple concurrent projects of various size and scope.
    • Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
    • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

    Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

    Description/Comment:
    The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
    ========
    If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
    call Peggy at 774-210-4108 Referrals appreciated!!
     
    Job Number: PL Avionics
    Job Location: KS & GA
    Rate: 70/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6-12+ months
    Start Date: 2-3 weeks
    Input Date: 04/23/2021
    Last Updated: 09/17/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    Avionics/Electrical Engineer (Contract)

    Description:

    PDS is looking for an Avionics/Electrical Engineer in Wichita, KS:



    In your role, you will:

    • Review certification plans
    • Write development and certification test procedures (Test Definition Sheets)
    • Plot and analyze ground and flight test data
    • Create flight test reports containing data demonstrating proper system operation as required by TC/FAA/EASA Regulations
    • Assist technicians in troubleshooting aircraft avionics system problems
    • Create development engineering documentation for design changes, in a flight test environment
    • Provide system performance analysis to ensure proper operation as per the design specification


    Qualifications
    As our ideal candidate,
    • You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in Avionics systems design and certification OR a minimum of 12 years’ experience if no degree.
    • You must have previous experience of supporting aircraft ground, flight, and functional testing. 
    • You have a working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems. (preferred)
    • You must have a good working knowledge of FAA & EASA Part 25 certification requirements.
    • You must have working knowledge of RTCA documents DO-178 and DO-160.
    • You must have the ability to interpret software documentation including logic diagrams related to avionics systems.
    • You must have experience with utilizing ARINC data to isolate faults related to system controls software.
    • You will demonstrate good teamwork and English communication skills, both oral and written, and be PC literate.
    • You will demonstrate interpersonal skills necessary to establish and maintain effective working relationships with co-workers, employees, management and suppliers.
    • You must be self-motivated, able to coordinate multiple activities and manage time effectively.


     
    Job Number: 2110127190
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 03/24/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rick Ingle
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PavfQAC&URLSource=cjhunter

    Avionics/Electrical Engineer (Contract)

    Description:

    PDS is looking for an Avionics Electrical Engineer in Wichita, KS:



    In your role, you will:
    • Review certification plans
    • Write development and certification test procedures (Test Definition Sheets)
    • Plot and analyze ground and flight test data
    • Create flight test reports containing data demonstrating proper system operation as required by TC/FAA/EASA Regulations
    • Assist technicians in troubleshooting aircraft avionics system problems
    • Create development engineering documentation for design changes, in a flight test environment
    • Provide system performance analysis to ensure proper operation as per the design specification

     

    Qualifications
    As our ideal candidate,
    • You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in Avionics systems design, testing and/or certification OR a minimum of 12 years’ experience if no degree.
    • You must have previous experience of supporting aircraft ground, flight, and functional testing
    • You have a working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems (preferred)
    • You must have a good working knowledge of FAA & EASA Part 25 certification requirements.
    • You must have working knowledge of RTCA documents DO-178 and DO-160.
    • You must have the ability to interpret software documentation including logic diagrams related to avionics systems.
    • You must have experience with utilizing ARINC data to isolate faults related to system controls software.
    • You will demonstrate good teamwork and English communication skills, both oral and written, and be PC literate.
    • You will demonstrate interpersonal skills necessary to establish and maintain effective working relationships with co-workers, employees, management and suppliers.
    • You must be self-motivated, able to coordinate multiple activities and manage time effectively.

     

     
    Job Number: 2110130725
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 05/07/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisa Petersen
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pkr4QAC&URLSource=cjhunter

    Avionics/Power Engineer

    Description:
    Inconen is looking for an Avionics/Power Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    -Avionics and/or Electrical system development and integration experience is required.
    -Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
    -Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
    -Understanding of DO-160, DO-178 and DO-254 processes is preferred.
    -System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
    -ARP-4754A experience including requirements development, validation and verification is preferred.
    -Experience with IBM DOORS or other requirements management database is preferred.

    Education:
    -Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    -Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Other Requirements
    -Advanced degree in engineering related field preferred.
    -The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 15265
    Job Location: Savannah, GA
    Rate: $68.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/11/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    CREO Aircraft Structures Mechanical Engineers and Designers

    Description:
    Looking for CREO degreed and non degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
     
    Job Number: PL CREO
    Job Location: WA
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6-12 months
    Start Date: 2 weeks
    Input Date: 07/14/2021
    Last Updated: 09/17/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Catia V5 Mechanical System Design Engineer-Savannah GA

    Description:
    Must be proficient in Catia V5 and preferably Catia V4 with Smarteam experience. Must have experience with design and electrical equipment installations or aircraft mechanical systems design. Previous aircraft modification experience is desired.


    If you are interested in this contract position and would like to apply, simply send me an e-mail with your up to date resume.

    davellino@advancedtechno.com
     
    Job Number: GA3625
    Job Location: GA
    Rate: 65/70hr.
    Per Diem: Available
    Overtime: most likely
    Duration: long term
    Start Date: 2/3 wks from offer
    Input Date: 05/05/2021
    Last Updated: 09/10/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Certification Engineer - TS I - TC Programs

    Description:
    Inconen is looking for a Certification Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Job Responsibilities:
    1. Prepares, develops, and reviews complex certification plans describing the project scope, certification deliverables, means of compliance, and test/conformity requirements.
    2. Coordinates with ODA Unit Members to resolve issues with certification deliverables and 8100-9 finding.
    3. Reviews TIA pre-requisites, drafts TIA, and creates problem reports memo.
    4. Independently prepares Summary Compliance Reports for complex projects.
    5. Responsible for tracking project task assignments, status, and estimated complete dates as assigned.
    6. Recommends improvements to existing processes.

    Unique Requirements:
    1. Knowledge of phases of TC, post-TC and STC certification projects, and the associated FAA Orders and Policy.
    2. Knowledge of Part 25 regulations, how those regulations drive design and system redundancy requirements, and the supporting regulatory guidance material.
    3. Understanding of software assurance and complex hardware requirements and applicability to our aircraft systems.
    4. Experience determining appropriate means of compliance.
    5. Understanding of certification testing process and deliverables.
    6. Understanding of airworthiness limitations and associated regulations and operating requirements.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12862
    Job Location: Savannah, GA
    Rate: $55.00 - $62.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/27/2021
    Last Updated: 08/12/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Combat AirCrft Trng Spec

    Description:
    Combat AirCrft Trng Spec

    Job ID # 2021-13764

    Contract Opportunity

    Location: Hazelwood, MO

    Industry: Aerospace & Defense

    Minimum Clearance: Ability to Obtain Secret Clearance

    Minimum Education: Bachelor’s Degree

    Minimum Experience: 10 Years

     

    What You’ll Do:

    Develop technical proposals for high performance aircrew training.
    Determine customer requirements and develops training courses and materials to satisfy requirements.
    Teach developed courses using a variety of media and training devices.
    Assess participant learning and adjusts presentation to ensure successful understanding by all students.
    Mentor other team members.
    Work under minimal direction.

    What You’ll Need:

    Ability to Obtain Secret Clearance
    A minimum of 1000 pilot-in-command or instructor pilot flight hours of rotary wing aircraft.
    A minimum of 300 flight hours as pilot in an AH-64 Apache Longbow aircraft. Knowledgeable of tactical missions and weapons employment in the Apache Longbow aircraft.

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.




    Education & Experience:

    Bachelor’s Degree combined with 10 + years of relevant work experience; or an equivalent combination of education and experience.

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
     
    Job Number: Job ID # 2021-13764
    Job Location: Hazelwood, MO
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 12 Months
    Input Date: 07/21/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Completions Electrical Interiors, Engineer 4

    Description:
    Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

    Unique Skills:
    • Capitol Harness &/or Mentor Graphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
    • Experience with systems development, layout, and logic
    • Familiarity in mechanical system design preferred.
    • Analyze Electrical designs in 3D models preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    • Catia V5 basic navigation experience.
    • Aircraft electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-506
    Job Location: Savannah, GA
    Rate: $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/16/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Completions Electrical Systems Design Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services. Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

    Unique Skills:
    • Proficient in System level Wire Diagram/Schematic design for aircraft.
    • Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
    • Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
    • Ability to complete system level ELA (Electrical Load Analysis).
    • Ability to develop or decipher technical and test specifications.
    • Knowledge of 14 CFR 25 Subpart H - EWIS based design.
    • Knowledge of Catia V5.
    • Part 25 Certification experience for cabin interiors preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Makes technical decisions and provides recommendations demonstrating leadership authority.
    • Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-559
    Job Location: Savannah, GA
    Rate: $65-$72/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/16/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Completions Electrical Systems Design Engineer, Completions - Eng. Contractor 4

    Description:
    Inconen is looking for a Completions Electrical Systems Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

    Proficient in System level Wire Diagram/Schematic design for aircraft.
    Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
    Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
    Ability to complete system level ELA (Electrical Load Analysis).
    Ability to develop or decipher technical and test specifications.
    Knowledge of 14 CFR 25 Subpart H - EWIS based design.
    Knowledge of Catia V5.
    Part 25 Certification experience for cabin interiors preferred.
    Familiarity with aircraft STC procedures preferred.
    Makes technical decisions and provides recommendations demonstrating leadership authority.
    Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15573
    Job Location: Savannah, GA
    Rate: $65.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/16/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Completions Mechanical Design Engineer, Completions - Eng. Contractor 4

    Description:
    Inconen is looking for a Completions Mechanical Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    Proficient in Catia V5
    Proficient in Smarteam
    Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
    Experience of routing plumbing on various monuments
    Electrical Harness Installation (EHI) experience also a plus.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15574
    Job Location: Savannah, GA
    Rate: $65.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/16/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Complex Electronic Hardware Verification Engineers - Aerospace -China.

    Description:
    Complex Electronic Hardware Verification Engineers - Aerospace -China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Electronic Hardware Verification of complex systems.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
    • Simulation test
    • Bachelors Degree or above.
    • Experience in FPGA / ASIC design or verification, proficient in Verilog or SV, enthusiastic about verification.
    • Familiar with Modelsim or questasim.
    • Familiar with Linux system.
    • Experience in TCL, Perl, Makefile, assertion and other languages or scripts is preferred.
    • Users with veri / Debussy, ies / IUS, primetime, conformal, Vincent (CDC tool) and other verification tools are preferred.
    • Familiar with video processing, Ethernet protocol or ARINC664 protocol is preferred.
    • Knowledge of DO254 is preferred.
    • Strong learning ability, problem analysis ability and communication ability.
    Role and Duties:
     
    • Responsible for the development of functional simulation (pre simulation) test cases, including functional simulation test code and script.
    • Responsible for improving the code coverage, so that the statement, branch, condition, expression coverage reaches 100%.
    • Responsible for timing simulation (post simulation), including the simulation of maximum delay and minimum delay.
    • Responsible for writing simulation test step documents, describing the test step execution process and criteria.
    • Responsible for output test report and test summary.
    • Participate in peer review of responsible documents or codes, and other related peer review.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
     
    Job Number: BH-387
    Job Location: China, China
    Rate: Remuneration depending upon experience level
    Per Diem: --
    Overtime: --
    Duration: 1-2 years
    Start Date: 06/28/2021
    Input Date: 06/29/2021
    Last Updated: 07/27/2021
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    Cyber Security Systems Engineer

    Description:
    Chipton-Ross is seeking a Cyber Security Systems Engineer or an opening in Poway, CA.

    RESPONSIBILITIES:
    We have an exciting opportunity for a Cyber Security Systems Engineer for our Unmanned Aerial Systems (UAS) Cybersecurity team located in Poway, CA. This role reports to the Systems Cybersecurity Engineering department, which includes aircraft, datalinks, sensor payloads and ground control stations. This position will focus on the design, development, qualification, integration and fielding of program protection and security solutions for UAS platforms.

    Provide support to projects and obtain/maintain the regulatory compliance's such as Accreditation and Authorization (A&A), Interim Authority to Test (IATT) and Authorization to Operate (ATO).

    Follow the Risk Management Framework (RMF) Process, cradle to grave by defining security requirements to implementation and test and support leading to an authorization.

    Analyze and recommend security features on all facets of the UAS.

    Develop and maintain RMF artifacts.

    Analyze missions and systems for potential Abuse and Misuse conditions along with consequences and propose mitigation approaches.

    Assesses multiple security solutions for best fit with customer requirements, establishes detailed system requirements and allocation of those requirements to sub-systems and engages with all engineering disciplines to quantitatively assess a system's [in] ability to resist cyber-attack over a range of cataloged attack Tactics, Techniques, and Procedures (TTPs).

    Provide guidance on ensuring systems are specified, designed, developed, implemented, integrated, and sustained to meet security needs, goals and objectives.

    Research and develop unique technical capabilities and processes for understanding, assessing, and analyzing system and technology resilience and security.

    Assist in systems security analysis and assessments, including identifying risk criticalities and handling options, to inform decision making.

    Assist in development of systems security and cybersecurity strategy development, system testing and evaluation, and verification and validation efforts.

    Analyze system requirements, software, hardware, supply chain, and integration approaches using analysis tools to identify vulnerabilities and system architecture, design, and implementation flaws.

    Must have experience assessing an over-arching set of environments including hardware/system configurations in order to:

    Develop security engineering solutions for UAS hardware and software

    Communicate status of the project to stakeholders
    Ensure cyber risks are mitigated and communicated effectively to the customer

    Be responsive to information technology guidelines, policies and directives

    Implement and maintain security features in addition to developing test procedures

    Educate non-cybersecurity personnel about the cybersecurity engineering process and importance of cybersecurity

    Demonstrated understanding of encryption, firewalls, antivirus, etc. are required for this position.

    Performs other duties as assigned or required

    REQUIREMENTS:
    Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
    Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.

    Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks.

    Knowledge of hardware, software, supply chain, systems vulnerabilities, anti-tamper and exploitation approach is desired.

    Experience in vulnerability discovery, and analysis tools, fuzzing tools, and dynamic system analysis is desired.

    Experience in technical evaluations of contractor proposals for systems resiliency, security, and cybersecurity considerations.

    Able to work extended hours as required.

    A Professional Engineering License is desirable.

    PREFERRED QUALIFICATIONS:
    ( but are not limited to)

    CISSP (Certified Information Systems Security Professional)

    CSSLP (Certified Secure Software Lifecycle Professional)

    Certified Information Security Manager (CISM)
    CASP (CompTia Advanced Security Practitioner)

    EDUCATION:
    Bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education.

    SHIFT:
    9/80

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 191499
    Job Location: Poway, CA
    Rate: $DOE
    Duration: 6 Months
    Input Date: 05/25/2021
    Last Updated: 09/19/2021
    Firm Name: CHIPTON ROSS
    Attention: Zachary Fasano
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: zfasano@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity/Checker - Special Missions

    Description:
    Inconen is looking for a Data Integrity/Checker - Special Missions for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Required Skills:
    Familiar with Gulfstream Model based design (MBD) requirements and 2D drawing practices. Preferable to have experience in aircraft modification design programs. Special Missions experience is a plus. Must have familiarity with CATIA V5 and SmarTeam view only functions.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15399
    Job Location: Savannah, GA
    Rate: $55.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/07/2021
    Last Updated: 07/30/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity/Checker-Special Missions

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company's products and services.

    Unique Skills:
    Required Familiar with company's Model based design (MBD) requirements and 2D drawing practices. Preferable to have experience in aircraft modification design programs. Special Missions experience is a plus. Must have familiarity with CATIA V5 and SmarTeam view only functions.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
    • Is consulted extensively by associates and others as a recognized authority within the field.
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    • Approach to problem solving balances technical product, cost and schedule.
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-551
    Job Location: Savannah, GA
    Rate: $55 - $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/07/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer-Aero Mechanisms WA-0805 July 21

    Description:
    Design Engineer - Aerospace Mechanisms - Seattle WA area - 0805

    Our client in the Seattle, WA area is a leading designer and manufacturer of specialty aircraft modifications and products, our client has several new programs and looking for great candidates to discuss direct opportunities for Design Engineers with Mechanism Experience using Solidworks or a similar CAD system


    Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada, and Europe. We have been in business 20 years in the US and 8 years in Europe.

    MECHANICAL DESIGN ENGINEER – MECHANISMS

    Solidworks or any 3D modeling software design personnel to develop aerospace mechanisms for latches, doors, etc that include the generation of models, specifications, and drawings.
    You will be responsible for designing and identifying component parameters, selecting materials, assemblies, and parts to be used for commercial aircraft
    You can demonstrate your background with mechanisms, kinematics, or structures design in the aircraft industry,
    Preparation of FAA documents and test plans; knowledge of aerospace industry materials, hardware, and processes;
    knowledge of FAA regulations;

    Qualifications:

    Bachelor's degree from a four-year college or university, or equivalent of education and experience
    Minimum of ten years of experience as a Design Engineer preferably within the aerospace industry.
    Experience in a manufacturing environment preferred, especially working with composite materials.
    Strong communication and interaction skills.
    Ability to lead continuous improvement projects and use /evaluate statistical data analysis tools during continuous improvement projects.
    Proficient in the use of Microsoft Office Suite including Word, Excel, PowerPoint, and Outlook.

    If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
     
    Job Location: Seattle, WA
    Rate: DOE
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/19/2021
    Firm Name: KELTIA DESIGN INC
    Attention: Jason Ruppert
    Address: 2333 SEA WAY BLVD STE 212
    City, State: EVERETT, WA 98203
    Phone: 206/368-9812
    Fax Phone: 206/237-8950
    Website: www.keltia-design.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer

    Description:
    Design and Analysis Engineer

    Job ID # 2021-13761

    Contract Opportunity

    Location: Oklahoma City, OK

    Industry: Aerospace & Defense

    Minimum Clearance: Ability to Obtain Secret Clearance

    Minimum Education: Bachelor's Degree

    Minimum Experience: 5 Years

     

    What You’ll Do:

    Work with customers to develop and document complex electronic and electrical system requirements.
    Analyze and translate requirements into system, hardware and software designs and interface specifications.
    Test and validate to ensure system designs meet operational and functional requirements.
    Monitor supplier performance to ensure system integration and compliance with requirements.
    Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    Research specific technology advances for potential application to company business needs.
    Collaborate with multiple engineering disciplines in the development, testing, and support of the C-17 platform.
    Responsible for operating the Avionics/Flight Controls simulation laboratories for the C-17 program.
    These laboratories are systems and software development and test facilities for actual and simulated LRU (Line Replaceable Unit) integration and test.
    Responsible for the configuration of the test facility, integration and test of aircraft/simulation software and hardware, and executing test procedures.
    Interfacing with design engineers will be vital, as is defining lab configurations which support requirements needed to test ongoing aircraft enhancements and modernization efforts.
    May actually have to 'fly' the C-17 simulator for trouble shooting or for customer support in a test or maintenance environment.
    Develop solutions to a variety of problems of moderate scope and complexity.

    What You’ll Need:

    Experience with aircraft Systems Integration such as avionics and flight controls
    Experience in testing flight critical systems via simulators and hardware-in-the-loop environment
    Experience in software testing systems (Avionics)
    Preferred Qualifications (Desired Skills/Experience):
    C-17 operations, and data systems
    Working with commercial communication standards such as 1553, RS422, and Ethernet

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.




    Education & Experience:

    Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 5 + years of relevant work experience in an Engineering classification or a Master’s Degree combined with 3 + years of relevant work experience in an Engineering Classification; or a PhD with experience in an Engineering Classification. ABET is the preferred, although not required, accreditation standard.

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-13761
    Job Location: Oklahoma City, OK
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 6 Months
    Input Date: 07/21/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Electrical Aircraft Interiors Engineer with Mentorgraphics

    Description:
    ===========================================
    Engineer Contractor 3 - Electrical Interiors in Savannah, GA
    Unique Skills:
    • Capitol Harness &/or Mentorgraphics experience
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
    • Familiarity in mechanical system design preferred.
    • Analyze Electrical designs in 3D models preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
    • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
     
    Job Number: PL Elec Interiors
    Job Location: Savannah, GA
    Rate: $60-65/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2-3 weeks
    Input Date: 03/23/2021
    Last Updated: 09/17/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    Electrical Applications Engineer

    Description:
    Inconen is looking for an Electrical Applications Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Required Skills:
    -Candidate must have in-depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
    -In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
    -Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
    -Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

    Education Requirements:
    -Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    -Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15311
    Job Location: Savannah, GA
    Rate: $66.00 - $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/18/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Electrical Design Engineer

    Description:
    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
    Unique Skills:
    Experience with Capital Logic required
    Experience with Smarteam preferred
    Experience with Instrumentation electrical design a plus
    Experience with Aircraft electrical wiring diagrams a plus
    Analog electrical design experience a plus

    Education and Experience Requirements:
    Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 374920
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 06/16/2021
    Last Updated: 09/18/2021
    Firm Name: CTS INTERNATIONAL
    Address: 160 NW GILMAN BLVD STE 250
    City, State: ISSAQUAH, WA 98027
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Design Engineer

    Description:
    Inconen is looking for an Electrical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    -Experience with Capital Logic required.
    -Experience with Smarteam preferred.
    -Experience with Instrumentation electrical design a plus.
    -Experience with Aircraft electrical wiring diagrams a plus.
    -Analog electrical design experience a plus.

    Education and Experience Requirements:
    -Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    -Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15447
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/16/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • Experience with Capital Logic required
    • Experience with Smarteam preferred
    • Experience with Instrumentation electrical design a plus
    • Experience with Aircraft electrical wiring diagrams a plus
    • Analog electrical design experience a plus

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects.
    • Provides specialized technical assistance to team members.
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    • Determines and develops own approach to solutions within schedule and cost objectives.
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
    • Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    • Actively works to improve daily processes and ensures all work meets customer requirements.
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-552
    Job Location: Savannah, GA
    Rate: $58-$63/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/16/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Electrical Engineer - ECU and LRU Design

    Description:
    ABOUT THE JOB:
    Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

    REQUIRED SKILLS:
    • Bachelor’s degree in Electrical Engineering
    • 5+ years Aerospace circuit design experience
    • Control systems and/or supporting component hardware design experience
    • Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
    • Experience developing hardware requirements from system requirements and managing those requirements
    • Engines/Propulsion, APU, or Flight Controls experience
    • Schematic capture
    • In-depth circuit analysis and simulation
    • DOORS proficiency
    • Effective communication skills (both verbal and written)
    • Self-motivated, accountable, detail-oriented

    PREFERRED SKILLS:
    • Engine ECU and LRU familiarity

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: TBD
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/10/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Email: RTC-TalentMgmt@Real-Time-Consulting.com
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer, Completions

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    • Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    • Catia V5 experiences a preference.
    • 14 CFR 25 Subpart H - EWIS based design experience a must.
    • Completions electrical system design experience preferred.
    • Part 25 Certification experience for cabin interiors preferred.
    • Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    • Experience with power distribution, lighting, switching, and harness routing required.
    • Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly
    • Makes technical decisions and provides recommendations demonstrating leadership authority.
    • Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements
    • Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements
    • Develops standards and guides for diverse engineering activities
    • Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    • Perform other duties as assigned.
     
    Job Number: 24-488
    Job Location: Savannah, GA
    Rate: $70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/02/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Electrical Harness Installation Eng/Secondary Structure (10 needed)

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Unique Skills:
    • Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    • Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    • Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical workbench is necessary
    • Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects .
    • Provides specialized technical assistance to team members.
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
    • Determines and develops own approach to solutions within schedule and cost objectives .
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
    • Acts as liaison with representatives outside of the assigned group/area .

    Additional Functions:
    • Actively works to improve daily processes and ensures all work meets customer requirements .
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
    • Perform other duties as assigned.
     
    Job Number: 24-523
    Job Location: Savannah, GA
    Rate: $66-70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/16/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    Electrical Harness Installation Engineer/Secondary Structures

    Description:
    Inconen is looking for a Electrical Harness Installation Engineer/Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

    Unique skills:
    1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    5. Aerospace Experience is required
    6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    8. Knowledge of Catia V5 Electrical workbench is necessary
    9. Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15220
    Job Location: Savannah, GA
    Rate: $66.00 - $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/03/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Embedded Software Engineer

    Description:
    PDS is seeking an Embedded Software Engineer for an open position in Ft. Worth, TX

    The 429 Embedded Software Engineer will be responsible for (but not limited to) the following:
    • Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
    • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
    • Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
    • Develop and update requirements and verification traceability
    • Conduct software integration and testing on target hardware
    • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
    • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
    • Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

    Education Requirements: 
    • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred.  Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
    • Master’s Degree in the Engineering disciplines mentioned above is suggested

     Position Requirements: 

    • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
    • Experience with DO-178 Level A software or other embedded software development and testing is required.
    • Experience with Flight Controls Computer Software.
    • Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
    • Experience with Primary Development Environment:
      • MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
      • C/C++ code
      • C# test scripts
      • Serena Dimensions / PVCS
      • Git
      • Embedded Software Development environments


     
    Job Number: 2010119389
    Job Location: Fort Worth, TX
    Per Diem: No
    Duration: 12 months
    Input Date: 05/25/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P8RqQAK&URLSource=cjhunter

    Eng. Contractor 3: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15036
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Eng. Contractor 4: Electrical Engineer, Completions

    Description:
    Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    1) Catia V5 experiences a preference.
    2) 14 CFR 25 Subpart H - EWIS based design experience a must.
    3) Completions electrical system design experience preferred.
    4) Part 25 Certification experience for cabin interiors preferred.
    5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    6) Experience with power distribution, lighting, switching, and harness routing required.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.
    9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
    10) Makes technical decisions and provides recommendations demonstrating leadership authority.
    11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
    12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
    13) Develops standards and guides for diverse engineering activities.
    14) Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12828
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 07/22/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Eng. Contractor 4: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15037
    Job Location: Savannah, GA
    Rate: $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 09/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Manager - Aerospace WA-1601 July 2021

    Description:
    Our client in the Seattle, WA area is a Leading FAA Certified Aerospace Repair and Service company specializing in cockpit repairs including avionics who are looking for a Manager of Engineering. This individual will develop, maintain and effectively execute development and R&D project plans in accordance with the company's strategic plan and will be responsible for production programs sustaining engineering.

    Keltia Design is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada and Europe. We have been in business for over 20 years in the US and 9 years in Europe.

    Job Types: Full-time, Contract and Permanent Positions

    Hands-on Engineering Manager Key Requirements
    • Experience in leading teams and in project management
    • Experience getting DER repairs/PMA/STC approved by the FAA
    • Experience with aircraft transparencies
    • Experience determining and articulating cost/benefit analysis of development projects
    • Experience/ability presenting to airline customers
    • This position is not just design/reverse engineering – it also is responsible for driving production/efficiency improvements

    Responsibilities:

    This individual must have a thorough understanding of the aircraft materials and structures markets and be familiar with suppliers, customers and OEWs in the Air Transport/RegionaI markets. Additional experience in General Aviation would be a plus.

    Supervise and lead engineers and/or technicians who design repairs for cockpit window structures and transparencies
    Coordinate engineering activities with manufacturing, quality, sales and marketing, and other groups within the Company, consistent with the Company's strategic goals.
    Coordinate and direct projects, making detailed plans to accomplish goals and direct the integration of technical activities.
    Monitor production for trends and implement lasting corrective actions.
    Oversee the research and development of new products and procedures.
    Hire, train, and mentor other engineers and supporting staff.
    Assign, direct, and evaluate the engineering team's work; and oversee the development and maintenance of the team's competence.

    Experience:

    BS in Aeronautical Engineering, Mechanical Engineering, or a related engineering discipline. Advanced degree preferred.
    Minimum Of 5 years engineering experience in the Aerospace MRO industry
    Extensive experience with FAA certification programs, preferably involving aircraft structures.
    Prefer Six Sigma Black Belt or equivalent certification

    Eligibility Requirement:

    Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible. This is an FAA Safety Sensitive position.

    If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
     
    Job Location: Seattle, WA
    Rate: DOE
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/19/2021
    Firm Name: KELTIA DESIGN INC
    Attention: Jason Ruppert
    Address: 2333 SEA WAY BLVD STE 212
    City, State: EVERETT, WA 98203
    Phone: 206/368-9812
    Fax Phone: 206/237-8950
    Website: www.keltia-design.com

    Engineering Technician

    Description:
    PDS Tech, Inc. is seeking a Engineering Technician, in Stratford, CT.
    Job Responsibilities: 

    Composite technicians support the fabrication, assembly, calibration, and test of rotorcraft scale models, and the fabrication, static testing and environmental conditioning of composite test articles.

    Specific responsibilities will include:
    • Design equipment and facilities to support ground test operations.
    • Types of facilities to be engineered include component fatigue and static test machines, rotor and transmission test stands for performance and acceptance testing, power system test beds, airframe/landing gear drop test, airframe shake tests and aircraft tie-down facilities.
    • Responsibility spans from conceptual design to the operational product including resolution of all issues related to design, structural analysis, procurement, fabrication, installation and operation.
    • In addition, the candidate may also be assigned to the oversight of the detail design and planning process as well as the support of subsequent documentation at the manufacturing, assembly and installation level.


     
    Job Number: 2010114347
    Job Location: Stratford, CT
    Duration: 15 months
    Input Date: 07/05/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Keith Zingler
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Oq6xQAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Technician 3

    Description:
    An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

    Engineering Technician 3 duties:

    * Support engineering activities such as, test, check-out, modification, fabrication and assembly of
    prototype electro mechanical systems, experimental design circuitry, or specialized test
    equipment.
    * Assemble, test, and debug test fixtures and informal test procedures.
    * Perform calibration checks on electronic instruments; troubleshoot an electronics system to
    determine cause and remedy for malfunctioning.
    * Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
    perform testing, checkout and trouble-shooting functions with minimum supervision.
    * Perform compliance testing to industry and customer-defined requirements on new and legacy
    electromechanical devices.
    * Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
    test programs, oscilloscopes, signal generators and specialized test apparatus.
    * Provide work leadership to lower level technicians.
    * Perform other duties as assigned.

    EDUCATION AND EXPERIENCE REQUIRED

    * Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
    schooling and experience required.
    * Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
    testing.
    * Aptitude and experience in board level testing and component level troubleshooting, repair, and
    rework.
    * Experience in using computer based tools and procedures to perform, document, and track
    testing.
    * Must have experience with power supplies and logic systems.
    * Excellent test and troubleshooting skills and independent judgment.
    * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
    lawfully admitted into the U.S. as a refugee or granted asylum.

    If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

     
    Job Number: 313811
    Job Location: Kirkland, wa
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 06/30/2021
    Last Updated: 09/15/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    Entry Level Aircraft Maintenance and Repair Technician

    Description:
    PDS Tech is seeking an Entry Level Aircraft Maintenance and Repair Technician for an open position in Trumbull CT. 

    The ideal candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

    Assigned Duties

    • Work independently with limited supervision.
    • Use precision measuring instruments and gauges such as feeler gauges, dial indicators, micrometers, calipers.
    • Perform repair of detail components by filing, stoning, lapping and polishing.
    • Using power and hand tools for drilling, sanding and riveting.
    • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
    • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
    • Follow procedures found in component maintenance manuals, service bulletins, ORI’s,
      OREI’s, drawings, check sheets, etc.
    • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
    • Chemically treat repaired surfaces in accordance with approved data.
    • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
    • Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
    • Use hydraulic test equipment.


     
    Experience Required
    • High School Diploma or Equivalent required
       

    Experience Preferred

    • Aerospace Powerplant and/or Airframe license preferred.
    • Min. 2 yrs. experience in Aerospace Maintenance preferred.


     
     
    Job Number: 2110133412
    Job Location: Trumbull, CT
    Duration: 12 months
    Input Date: 07/21/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PsQHQA0&URLSource=cjhunter

    Entry Level Aircraft Mechanic Repair Technicians

    Description:
    PDS Tech is seeking Entry Level Aircraft Mechanic Repair Technicians for open positions in Opa Locka FL.

    The duties and responsibilities of the position include:
    • Be able to disassemble landing gear into major and minor components for processing
    • Remove bushings from components using hydraulic equipment and special tools as required
    • Clean parts by steam and/or solvent cleaning in accordance with overhaul manual and GR specifications
    • Perform internal material logistics duties for overhaul components
    • Check in components and produce required documentation for processing.

    Basic Qualifications
    • 0-3 of experience with shop or manufacturing equipment
    • Moderate computer skills
    • Ability to operate hand tools, electrical and pneumatic tools


    Education
    High school diploma or GED

    This is an FAA Safety Sensitive position.  Candidates will be in an FAA Drug Screen program.
     
     
    Job Number: 2110128513
    Job Location: Opa Locka, FL
    Per Diem: No
    Duration: 18 months
    Input Date: 04/02/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PeUtQAK&URLSource=cjhunter

    Experienced Aircraft Mechanical Test Engineer (Remote position)

    Description:
    PDS Tech is seeking a Remote Experienced Aircraft Mechanical Test Engineer(Position will start off remotely and then transition on-site in Stratford CT)

    The ideal candidate will be responsible for specific discrete tasks covering all aspects of ground testing helicopter components and systems.

    This position requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Main tasks include:
    • Support and management of bench testing including support of supplier testing as well as in-house component laboratory tests to validate component designs;
    • Writing and reviewing technical documents for development and qualification requirements, procedures and test results;
    • Review of supplier qualification plans, procedures, reports and drawings.


    Requirements

    • 5 years minimum experience with component bench testing is a plus
    • Background with qualification to MIL-STD-810 and RTCA-DO-160 requirements


    Tasks include:

    • Detailed test planning,
    • Coordination with internal and external customers,
    • Test conduct,
    • Use of computer data analysis tools, and
    • Generation of test plans and reports.


    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.  This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, and mission equipment.  Tasks also include the development and implementation of test procedures used to validate proper installation of aircraft systems and components during final assembly, and supporting and establishing operating limitations for both flight test programs and fielded aircraft

     
    Job Number: 2110126208
    Job Location: Stratford, CT
    Duration: 12 months
    Input Date: 03/08/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PXYMQA4&URLSource=cjhunter

    F5 Engineering Ground Test Laboratory Technician

    Description:
    PDS Tech is seeking 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

    The Lab technician must:
    • Be capable of working from engineering drawings
    • with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
    • Be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
    • Possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
    • Possess a strong aptitude for industrial hydraulic component fabrication and assembly.
    • Be able to read and interpret engineering mechanical drawings and fluid power schematics.
    • Be able to work from elevated work platforms at various heights.
    • Be willing and able to work in inclement weather.
    • Be capable and comfortable working within a diverse team environment.
      Possess skills and aptitude to operate test facilities and data acquisition systems.


     
    Job Number: 2110131544
    Job Location: Stratford, CT
    Duration: 15 months
    Input Date: 05/21/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmxJQAS&URLSource=cjhunter

    F5 Engineering Ground Test Laboratory Technician - 1st Shift

    Description:
    PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

    The ideal candidate will be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
    • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
    • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
    • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
    • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
    • Must be able to work from elevated work platforms at various heights.
    • Must be willing and able to work in inclement weather.
    • Must be capable and comfortable working within a diverse team environment.
    • Must possess skills and aptitude to operate test facilities and data acquisition systems.


     
    Job Number: 2010121878
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 15 months
    Input Date: 11/24/2020
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PFWkQAO&URLSource=cjhunter

    F5 Engineering Ground Test Laboratory Technician - 2nd Shift

    Description:
    PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

    The ideal candidate will be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
    • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
    • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
    • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
    • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
    • Must be able to work from elevated work platforms at various heights.
    • Must be willing and able to work in inclement weather.
    • Must be capable and comfortable working within a diverse team environment.
    • Must possess skills and aptitude to operate test facilities and data acquisition systems.


     
    Job Number: 2010121877
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 15 months
    Input Date: 06/16/2021
    Last Updated: 09/17/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PFWfQAO&URLSource=cjhunter

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Fatigue & Damage Tolerance Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services
    Unique Skills
    • Fatigue and Damage Tolerance analyses of aircraft primary structure and modifications, updating inspection intervals, and writing FDT reports.
    • Stress Analysis on Fuselage, Wing, and Empennage Required
    • Full-Scale Fatigue Test Analysis and Investigations Required
    • Experience with Patran/Nastran, Abaqus, StressCheck is Required
    • Familiarity with FDT Analysis Methods AFGROW and Cracks98 Preferred
    • Component Test Requirements and Test Data Correlation Preferred
    • Methods Development for Analytical and Fatigue Test Spectrums Preferred
    • Internal Loads Development Preferred
    • Experience with SmarTeam & Catia V5 to support stress analysis and drawing release
    • Ability to write and review technical documents and reports environment

    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 374934
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 06/21/2021
    Last Updated: 09/18/2021
    Firm Name: CTS INTERNATIONAL
    Address: 160 NW GILMAN BLVD STE 250
    City, State: ISSAQUAH, WA 98027
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fatigue and Damage Tolerance Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • Fatigue and Damage Tolerance analyses of aircraft primary structure and modifications, updating inspection intervals, and writing FDT reports.
    • Stress Analysis on Fuselage, Wing, and Empennage Required
    • Full-Scale Fatigue Test Analysis and Investigations Required
    • Experience with Patran/Nastran, Abaqus, StressCheck is Required
    • Familiarity with FDT Analysis Methods AFGROW and Cracks98 Preferred
    • Component Test Requirements and Test Data Correlation Preferred
    • Methods Development for Analytical and Fatigue Test Spectrums Preferred
    • Internal Loads Development Preferred
    • Experience with SmarTeam & Catia V5 to support stress analysis and drawing release
    • Ability to write and review technical documents and reports environment

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-554
    Job Location: Savannah, GA
    Rate: $70-$77/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ year
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 08/30/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fatigue and Damage Tolerance Engineer

    Description:
    Inconen is looking for a Fatigue and Damage Tolerance Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    • Fatigue and Damage Tolerance analyses of aircraft primary structure and modifications, updating inspection intervals, and writing FDT reports.
    • Stress Analysis on Fuselage, Wing, and Empennage Required
    • Full-Scale Fatigue Test Analysis and Investigations Required
    • Experience with Patran/Nastran, Abaqus, StressCheck is Required
    • Familiarity with FDT Analysis Methods AFGROW and Cracks98 Preferred
    • Component Test Requirements and Test Data Correlation Preferred
    • Methods Development for Analytical and Fatigue Test Spectrums Preferred
    • Internal Loads Development Preferred
    • Experience with SmarTeam & Catia V5 to support stress analysis and drawing release
    • Ability to write and review technical documents and reports environment

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15468
    Job Location: Savannah, GA
    Rate: $70.00 - $77.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/21/2021
    Last Updated: 09/13/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Flight Controls Technician

    Description:
    Chipton-Ross is seeking 8 Flight Control Technicians

    JOB SUMMARY:
    Responsible for mechanical maintenance (preservation, repair, inspection, overhaul, replacement of parts) on Commercial aircraft types in strict adherence to instructions provided in appropriate technical documentation.

    ESSENTIAL RESPONSIBILITIES:

    1. Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor's directives and manuals to complete all routine and non-routine assignments in a timely manner.

    2. Operationally check, test, rig and adjust aircraft flight control systems to ensure functionality to manufacturer's specifications.

    3. Support training activities within the crew including assisting and providing on the job training to lesser skilled mechanics.

    4. Maintain and store various tools in a serviceable condition.

    5.Adhere to safe maintenance practices and keep a clean work area.

    6. Maintain and supply personal records of work performed on OJT forms for the Training Department.

    7. Successfully complete any courses deemed necessary by the Training Department.

    8.Perform any work that may be assigned by his or her supervisor.

    WORKING ENVIRONMENT:

    SUPERVISION: Under general direction. Normally performs duties after receiving general instructions as to methods, procedures, and desired end results. Some opportunity for discretion when making selections among a few, easily identifiable choices. Assignment is usually reviewed upon completion.

    INTERPERSONAL RELATIONS: A moderate level of interpersonal skills is required to maintain an effective relationship with co-workers and supervision.

    PHYSICAL ENVIRONMENT: Requires easy mobility around various sections of aircraft and
    the dexterity to remove and replace parts in a timely manner. Requires mental skills and quickness with the ability to cope with stress and intense effort or exertion usually caused by long working hours. Must have the capacity to gain knowledge by hearing for one's own safety due to the dangers involved. Working environment requires standing 90% of the workday on hard surfaces. Must be able to lift 50lbs.