Job Search Results

313 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/09/19 Sunday 05:00PM Pacific Time by ContractJobHunter. )

Listings 1 - 313

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Manufacturing Engineers Needed

Description:
Description :
Coordinates with engineering, manufacturing, and supply teams to develop and guide the program manufacturing and tooling plan.
Ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. Uses process engineering principles and techniques.
Develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations.
Performs trade and cost studies and assists in leading integrated product and process teams. Ability to apply knowledge in one or more of the following areas; Composite non-metallic, Electrical/Electronics, Machining, Sheet metal, Systems and Structures


Requirements:

Must be available to work all Shifts.

5+ years of experience


The Structures Company LLC is an AA/EOE.
 
Job Number: 494
Job Location: Kinston, NC
Rate: $55-$65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 08/08/2021
Last Updated: 08/11/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13758

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Provide an opportunity to further advance the cutting-edge technology that supports some of our nation’s core defense/intelligence services and systems.
Perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics.
Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules.
Task would include developing and prepare reports, procedure documentation, and a high level of understanding of product specifications.
Interface daily with engineering and may be tasked to run special tests.
Work successfully with associates in other departments and understand cross-functional relation
Work on assignments that are difficult, requiring judgment in resolving issues or in making recommendations
Focus is on completing tasks or activities supporting implementation of procedures
Receive little instruction on daily work with general instructions on newly introduced assignments
May provide direction to other employees with similar duties

What You’ll Need:

Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
Able to demonstrate skills and initiative to complete actions.
Able to manage time effectively in order to support multiple projects throughout the work day.
Strong background in electrical test techniques is required.
Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required.
Read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.
Has a solid understanding of the job skills and learns company policies and procedures to complete routine tasks

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

Associate’s Degree in a related discipline or equivalent combinate with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
 
Job Number: Job ID # 2021-13758
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/21/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13760

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Provide an opportunity to further advance the cutting-edge technology that supports some of our nation’s core defense/intelligence services and systems. 
Perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics.
Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules.
Develop and prepare reports, procedure documentation, and a high level of understanding of product specifications.

What You’ll Need:

Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required.
Read and follow detailed work instructions and/or test procedures.
Second and/or third shift coverage will be required for most assignments.
Has a solid understanding of the job skills and learns company policies and procedures to complete routine tasks
Works on assignments that are difficult, requiring judgment in resolving issues or in making recommendations
Focus is on completing tasks or activities supporting implementation of procedures
Receives little instruction on daily work with general instructions on newly introduced assignments
May provide direction to other employees with similar duties
Prefer recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build. Candidate qualifications include:
Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
Interface daily with engineering and may be tasked to run special tests.
Able to demonstrate skills and initiative to complete actions.
Able to manage time effectively in order to support multiple projects throughout the work day.
Work successfully with associates in other departments and understand cross-functional relationships. 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

Associate’s Degree in a related discipline or equivalent combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13760
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/21/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13759

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Provide an opportunity to further advance the cutting-edge technology that supports some of our nation’s core defense/intelligence services and systems.
Perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics.
Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules.
Develop and prepare reports, procedure documentation, and a high level of understanding of product specifications.

What You’ll Need:

Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.
Has a solid understanding of the job skills and learns company policies and procedures to complete routine tasks
Works on assignments that are difficult, requiring judgment in resolving issues or in making recommendations
Focus is on completing tasks or activities supporting implementation of procedures
Receives little instruction on daily work with general instructions on newly introduced assignments
May provide direction to other employees with similar duties
Prefer recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build. Candidate qualifications include:
Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
Interface daily with engineering and may be tasked to run special tests.
Able to demonstrate skills and initiative to complete actions.
Able to manage time effectively in order to support multiple projects throughout the work day.
Work successfully with associates in other departments and understand cross-functional relationships. 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

Associate’s Degree in related discipline or equivalent combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13759
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/21/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-2nd shift

Description:
An Advanced Engineering Technician-2nd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-2nd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-2nd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 312826
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/02/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-2nd shift

Description:
An Advanced Engineering Technician-2nd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-2nd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-2nd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314490
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-3rd shift

Description:
An Advanced Engineering Technician-3rd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-3rd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-3rd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314491
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airborne Maintenance System - Senior System Designer- Aerospace - China.

Description:
Airborne Maintenance System -  Senior System Designer - Aerospace - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Airborne Maintenance Systems Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Masters Degree in Computing, Communications  Electronics,  Electrical  Control.
  • Have experience in health monitoring, fault diagnosis or related system development.
  • Understand the development process of avionics system / subsystem of civil aircraft.
  • Have strong research ability and be able to identify the development trend of technology.
  • Have team management experience, strong sense of responsibility, good communication skills and team spirit, positive working attitude, optimistic.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-384
Job Location: China, China
Rate: Remuneration dependant upon experience
Per Diem: --
Overtime: --
Duration: 1-3 Years
Start Date: 06/28/2021
Input Date: 06/29/2021
Last Updated: 07/27/2021
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technicians

Description:
STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

 Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Essential Knowledge, Skills & Abilities:

Education: 

High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.

Experience: 

A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment/  Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37807
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Product Integrity Tester / Inspector (2nd shift)

Description:
PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (2nd shift) for an open position in Coatesville PA

The ideal candidate will:
  • Support and lead testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations.
  • Perform the inspection of demonstrator and production aircraft for functional operation and conformance to government and company standards and specifications.
  • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.


The candidate may:

  • Perform preflight and post flight inspections in accordance with standard procedure on flight-proven aircraft.
  • Inspect any adjustments, repairs, or modifications made on the aircraft.
  • Monitor and verify quality in accordance with statistical process or other control procedures.

A&P Licensure is strongly desired

 
Job Number: 2010120746
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 06/07/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PCCFQA4&URLSource=cjhunter

Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic)

Description:
PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic) for an open position in Coatesville PA

The ideal candidate will:
  • Inspect aircraft and component parts for structural integrity using nondestructive inspection methods.
  • Interpret nondestructive inspection test results and provide information about defects to repair center.
  • Perform nondestructive inspection on structures, components, and systems.
  • Detect flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, and ultrasonic test equipment.
  • Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.
  • Perform the inspection of modification and production aircraft for functional operation and conformance to government and company standards and specifications.
  • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.
  • May perform pre-flight and post-flight inspections in accordance with standard procedure on flight-proven aircraft.
  • May inspect any adjustments, repairs, or modifications made on the aircraft.
  • Must be able to work in confined spaces, elevated platforms for an extended period of time.
  • Must be willing to work off-shifts as required.
  • Must be willing and able to lift 30 lbs.

Basic Qualifications:
  • Documented proof of the minimum requirements for:
    • Level II in Fluorescent Penetrant
    • Level II Eddy Current
    • Level II Ultrasonic in accordance with NAS 410.

  • Basic Excel and MS Word Experience, ability to read blueprints.
     

Desired Skills:

  • Any other level II NAS 410 Qualifications.
  • Airframe and Powerplant Certificate preferred.

 
Job Number: 2110127910
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 05/20/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcwqQAC&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is hiring for Electronic Assemblers to work at the Honeywell - Clearwater, FL location.

2nd or 3rd Shift Openings
 
PDS Tech, Inc. is hiring for Electronic Assemblers to work at the Honeywell - Clearwater, FL location.

Job Details:
  • Assembles fabricated parts at floor stations
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications
  • Uses hand tools and power tools to assemble units according to product specifications
  • Identifies units that fail tests or tolerance levels and repairs as necessary


  • Soldering jumper wires, through hole components, fine pitch components, small SMT components etc. parts vary in size and complexity.
  • Epoxy application is needed on various components of the assemblies, ranging from very small components to larger components.


  • Relies on instructions and pre-established guidelines to perform the functions of the job

Skills/Qualifications:
  • Due to government regulations, must be a US Citizen
  • High School Diploma or GED
  • 5+ years of Assembler experience (i.e. soldering, wiring & electronics).
  • Recent experience soldering under microscope is required
  • Ability to work with “fine pitch” components & detail chassis wiring
  • Good hand dexterity
  • Working knowledge of computers strongly desired
  • IPC Certification a plus
  • Good written & verbal communication skills
  • Good Team Player


  • Must be willing to work weekends, Holidays and extended hours on an as need basis
  • Vision Test will be required

 
Job Number: 2110134884
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 07/08/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxBEQA0&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is hiring for Electronic Assemblers to work at the Honeywell - Clearwater, FL location.
2nd & 3rd Shift Openings (**Will train on 1st Shift for the first 2-3 months**)
 
**NEW HIRE BONUS: Earn up to in $2k Bonuses in first 90 days!**

Job Details:
  • Perform standard work assigned to meet production requirements and the respective schedules.
  • Flex to work different tasks and work cells to meet business objectives and customer needs.
  • Monitor, assist, and improve all aspects of Safety, Quality, Delivery, Inventory, and Productivity in the work cells.
  • Adhere to Standard Work and complete continuous improvement activities.
  • Utilize computer to access work instructions, access and/or input labor tracking, work in progress tracking, non-conformance tracking, and configuration information.
  • Complete required training for product assembly, work instruction layout, procedures, and processes.
  • Complete certification training to perform various tasks within the assigned work cell. Work towards becoming an expert associate for assigned cell tasks.
  • Actively participate in daily team meetings and associated tasks.
  • Become part of a flexible work force, supporting ISC operational and production needs as required.

 
 
Prerequisites:
  • Requires a high school diploma or its equivalent
  • Requires up to 2+ years' experience in the field or in a related area
  • Soldering and final assembly experience
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field
  • Excellent hand-eye coordination
  • Attention to detail
  • US Citizenship required
  • Ability to lift at least 15 lbs


 
 
Job Number: 2110129193
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 05/06/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PgcXQAS&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is hiring for Electronic Assemblers to work at the Honeywell - Clearwater, FL location.
*2nd Shift
 
**New Hire Bonus: Earn up to $2k Bonus in first 90 days!**



Job Details:
  • Assembles fabricated parts at floor stations
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications
  • Uses hand tools and power tools to assemble units according to product specifications
  • Identifies units that fail tests or tolerance levels and repairs as necessary


  • Soldering jumper wires, through hole components, fine pitch components, small SMT components etc. parts vary in size and complexity.
  • Epoxy application is needed on various components of the assemblies, ranging from very small components to larger components.


  • Relies on instructions and pre-established guidelines to perform the functions of the job

Skills/Qualifications:
  • Due to government regulations, must be a US Citizen
  • High School Diploma or GED
  • 3+ years of Assembler experience (i.e. soldering, wiring & electronics).
  • Experience soldering under microscope required
  • Good hand dexterity
  • Working knowledge of computers strongly desired
  • IPC Certification a plus
  • Good written & verbal communication skills


  • Must be willing to work weekends, Holidays and extended hours on an as need basis
  • Vision Test will be required

 
Job Number: 2110133583
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 07/12/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pt0zQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on printed circuit card assemblies.
Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications.
Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-610 (and other) quality standards. Troubleshooting of process parameters to improve yield.

Required Skills:
Three years’ experience working with Surface Mount Technology (SMT) material.
• Three years’ experience in IPC-610 and/or J-STD-001 soldering
• Demonstrated printed circuit knowledge and experience
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in building circuit card assemblies
• Experienced working with a microscope
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
 
Job Number: CJH-R-6058
Job Location: Clearwater, FL
Rate: $16
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler- 40717

Description:
We have an Excellent Contract to Hire position for an Assembler to join a leading Company located in the Millersville, MD area.

**Must be able to have active Secret Clearance or be able to obtain one.**

Fully proficient support individual contributors. Works under limited supervision. Maybe a resource to other employees in areas of expertise. Assignments are moderately difficult.

Essential Functions:
• Responsible for performing a wide variety of electronic or electro-mechanical assembly operations which may include skilled handwork or utilizing automated production equipment.
• Comprehends and interprets a variety of technical specifications, terms, and documents.
• Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on assembly units.
• Makes setups and adjustments holding tolerances to blueprint specifications.
• Other duties as assigned

Qualifications:
• Requires fully proficient job knowledge/skills.
• Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience.
• Secret Clearance required ** This position will be in a cleared facility and requires a clearance. All candidates must have an active clearance or be willing to obtain a Secret clearance. **
 
Job Number: 40717
Job Location: Millersville, MD
Rate: $28.00
Per Diem: NO
Overtime: YES
Duration: Temp to Hire
Start Date: ASAP
Input Date: 08/26/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Assembly & Test Technician

Description:
PDS Tech, Inc. is hiring for Assembly & Test Technician’s to work at the Honeywell - Clearwater, FL location.
2nd Shift openings

**New Hire Bonus: Earn up to $2k Bonus in first 90 days!**


Job Details:
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • Relies on limited experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under direct supervision.
  • A certain degree of creativity and latitude is required.
  • Typically reports to a supervisor.
  • Lifting is generally at or below 30Lbs. without significant repetitions

Qualifications / Skills:
 
  • High School Diploma/GED Required.
  • US Citizenship Required
  • Requires knowledge of industry specific tests and testing equipment.
  • Requires 0-2 years of solder and manufacturing experience in the field or in a related area.
  • Familiar with standard concepts, practices, and procedures within a particular field.

 
Job Number: 2110131537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 07/07/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmwaQAC&URLSource=cjhunter

Assembly Supervisor

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.


 
  Requirements
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following area: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.
  6.  Skills and Abilities Required:
  7. Strong problem solving, analytical, and technical skills.
  8. Strong oral and written communication skills.
  9. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  10. Experience implementing or being part of a Lean Manufacturing organizations.
  11. Demonstrated success in implementation of continuous improvement initiatives.
  12. Ability to read and interpret prints and engineering documents.
  13. Familiar with Microsoft Office (Power Point, Excel, and Word).
  14. Self-motivated with ability to foster moral amongst his/her team

 
Job Number: 2110131542
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 06/29/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pmx9QAC&URLSource=cjhunter

Assembly Supervisor-1st Shift

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.

  Requirements:
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following areas: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.

  Skills and Abilities Required:

  1. Strong problem solving, analytical, and technical skills.
  2. Strong oral and written communication skills.
  3. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  4. Experience implementing or being part of a Lean Manufacturing organizations.
  5. Demonstrated success in implementation of continuous improvement initiatives.
  6. Ability to read and interpret prints and engineering documents.
  7. Familiar with Microsoft Office (Power Point, Excel, and Word).
  8. Self-motivated with ability to foster moral among his/her team.

 
Job Number: 2110131461
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 07/21/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmiBQAS&URLSource=cjhunter

Automotive Resident Engineer (System Engineering)

Description:
  • CAN, LIN, UDS, Communication protocols
  • Vector Tools (CANalyzer/CANoe)
  • DET Tool
  • Bench/Vehicle Level Testing
  • Issue Tracking/Issue Analysis (JIRA Tools)

 
  • Microsoft Tools ( MS Excel, Word, PowerPoint)
  • Google Suite
  • Electronics/Embedded Systems
  • Knowledge of vehicle Sensors (cameras, ultrasonics)
  • Knowledge of Autonomous Drive Features
  • Knowledge of System Architecture Design/Requirements
  • Knowledge of Functional Safety/ISO 26262
  • Knowledge of Vehicular Systems
  • Cross-Functional Collaboration
  • Data collection/acquisition
  • Debugging in vehicle or in plant conditions

 
Job Number: 2010122591
Job Location: KS City, MO
Duration: 6 months
Input Date: 02/11/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PJ5OQAW&URLSource=cjhunter

Automotive Technicians

Description:
Summary:
The main function of an electronics technician is to lay out, build, test, troubleshoot, repair, and modify developmental and production electronic components, parts, equipment, and systems, such as computer equipment, applying principles and theories of electronics, engineering mathematics, electronic and electrical testing. A typical electronics technician has the ability to make engineering drawings, and read and interpret blueprints.


Job Responsibilities:
• Read blueprints, wiring diagrams, schematic drawings, and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
• Test electronics units, using standard test equipment, and analyze results to evaluate performance and determine need for adjustment.
• Perform preventative maintenance and calibration of equipment and systems.
• Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
• Maintain system logs and manuals to document testing and operation of equipment.
• Write reports and record data on testing techniques, laboratory equipment, and specifications to assist engineers.
Track and document repairs, truck configurations, and Truck records.
• Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools

 
Qualifications:
• Creativity, verbal and written communication skills, analytical and problem solving ability.
• Team player and detail oriented.
• Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Knowledge of the practical application of engineering science and technology.

• Bachelor's degree in engineering required.
• 5-7 years experience required.

 
 
Job Number: 2010122253
Job Location: Portland, OR
Duration: 6 months
Input Date: 04/07/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PGzcQAG&URLSource=cjhunter

Avionics Installer I

Description:
PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 

 

Unique Skills:



Must be willing to work any shift as required




Education and Experience Requirements: 



  • High School diploma/GED.
  • General knowledge of applicable regulatory requirements and customer specifications.
  • Must know how to use a multimeter.
  • Entry level position.
  • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.


Other Requirements:
1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Strong written and verbal skills required.
4. Computer skills and general software knowledge necessary.


 
Job Number: 2110135450
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/22/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PyiMQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
An Avionics Technician job in Palo Alto, CA is currently accepting applications. This is a 2-month contract position with our key aviation client. In this role, you will be responsible for fabricate and install wire harnesses, and electronic systems, modules, and sub-assemblies on our industry leading eVTOL aircraft. You will be working in a fast-paced prototype development environment and will be expected to work as part of a team. To be considered for this role, you will have a High School Diploma or equivalent along with 5+ years of aviation experience performing modifications or aircraft wiring installs and 3+ years of experience as a harness technician working on application critical, high-complexity harnesses.

Avionics Technician Job Responsibilities:
* Install and fabricate wire harnesses through lay in, routing, dressing and connector termination using aerospace approved tooling and best practices.
* Locate and install harness mounting hardware inclusive of click studs and clamps.
* Able to work from both very detailed, released manufacturing drawings as well as development harnesses sketches.
* Meet scheduled timelines and, in some cases, aggressive deadlines to have hardware ready for project milestones
* Follow engineering designs and building concepts/prototypes assisting with testing, continuity checks and data collection.

Avionics Technician Job Requirements:
* High School Diploma or equivalent. A&P Certification preferred
* 5+ years of aviation experience performing modifications or aircraft wiring installs
* 3+ years of experience as a harness technician working on application critical, high-complexity harnesses
* Underpinning knowledge of IPC 610/620
* Demonstrated familiarity with AC43.13-B
* Prior experience of bundling harness using techniques and methods including wax string lacing
* Must have hands on experience using shop tools and calibrated aerospace tooling including torque wrenches, crimping and striping tools.
* Must be able to lift 25 lbs unassisted
* Must be able to distinguish colors
* Prior work experience in the aerospace industry. Composite airframe preferred.
* Successful experience in a fast paced prototype/design environment

If you are interested in this Avionics Technician job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314285
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/15/2021
Last Updated: 09/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 09/17/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

CAD Designer Specialist

Description:
PDS Tech is seeking CAD Designer Specialists near Wilmington, MA. 

This position will be responsible for providing Design support to customer-funded programs and internal research efforts within our Intelligence, Surveillance and Reconnaissance (ISR) business units. Our intelligence, surveillance, and reconnaissance (ISR) solutions serve a broad array of government, civil and commercial customers by enhancing information superiority, contributing to our national security and providing actionable data for the protection of property and human life. We specialize in high-reliability airborne and space-based remote sensing payloads that offer active and motion imaging and data processing, exploitation, and dissemination. We also provide solutions that map and monitor the earth for a variety of commercial and governmental users.

Responsibilities:
  • Provide CAD support (Autodesk Inventor) to engineers and other designers.
  • Generate new drawings and documentation, as well as modify existing drawings and documentation.
  • Manage and control mechanical digital data files and drawings.
  • Prepare and incorporate engineering change orders.
  • Input data and manage hardware structures in a Product Data Management tool (Vault).

Qualifications:
• Associates Degree and a minimum of 8 years of prior related experience or Bachelor’s Degree and a minimum of 4 years of prior related experience, or equivalent.
• Bachelor’s Degree and a minimum of 2 years of prior related experience or 2 years post-Secondary/ Associates Degree and a minimum of 6 years of prior related experience

Preferred Additional Skills:
• Expert knowledge in 3D parametric CAD modeling and PDM systems. Experience with Inventor and Vault highly desirable.
• Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
• Knowledge of applicable government and industry standards including ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.
• Strong understanding and application of Geometric Dimensioning and Tolerancing.
• Previous experience in designing electro-optical and opto-mechanical payloads and sub-systems for aerospace & military defense applications.
• Experience in developing interfaces between spacecraft, payload systems, and sub-assemblies is highly desired.
• Previous experience in supporting the design of space structures, mechanisms, electronics packaging, and/or composite structures.
• Outstanding oral, written and presentation skills for interfacing with senior management and customers.
• DOD secret security clearance desired.

Security Clearance:
Please be aware this position requires the ability to obtain a Security Clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

 
Job Number: 2110135056
Job Location: Wilmington, MA
Duration: 6 months
Input Date: 07/19/2021
Last Updated: 09/17/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxeIQAS&URLSource=cjhunter

CNC Programmer

Description:
A CNC Programmer job in Los Alamitos, CA is currently available through Belcan. In this role, you will be responsible for the managing, programming and maintenance of computer numeric controlled (CNC) equipment for prototype (first run) and production of composite parts within the facility. To be considered for this role, you will have a High School Diploma, or equivalent, plus 5-7 years of relevant experience.

CNC Programmer Job duties:

* Review electronic or written blueprints or specifications for a job
* Review and obtain proper tooling
* Program extremely close tolerance parts
* CNC program in Mastercam (2020) 3, 4, and 5 axis geometry, proving out programs prior to machining, machining of parts and tools through CNC machining on 3-axis vertical mills, Large Capacity 5-axis CNC Router, 2 axis lathe and manual machining
* Work with operators, program managers, engineers to determine project scope, schedule and important job details
* Determine methods, tooling, feeds, speeds and all other necessary requirements necessary for manufacturing of parts
* Machine composite materials including carbon, fiberglass, honeycomb, and others
* Direct or train other employees in machine setup, running, maintenance and cleaning
* On occasion, you may be asked to work irregular hours to accommodate manufacturing schedules
* Keep program managers informed of operations, problems, and opportunities as they arise
* Maintain appropriate records and documentation

Qualifications:

* Prior experience with MasterCAM programming
* Programming 3, 4 and 5 axis Mill & 2 axis Turn equipment
* Must have strong GD&T knowledge to interpret engineering drawings from sketches, determine cutting or grinding tools to be used, method of holding, and machine speeds and feeds
* Varied CNC operating experience desirable
* Must have worked in CNC programming demonstrating a high degree of proficiency
* Experience machining a variety of materials.
* Solid understanding of manufacturing processes for layup, trim, and assembly of composite hardware
* Previous experience working in a fast-paced production environment with high quality requirements; example military, aerospace or medical equipment highly preferred
* Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
* Ability to read/interpret engineering drawings and specifications
* Able to perform basic mathematics (addition, subtraction, multiplication, division)
* Ability to identify composite damages


If you are interested in this CNC Programmer position in Los Alamitos, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314467
Job Location: Los Alamitos, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
City, State: West Region
Email: sswatkins@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=314467&job_number=314467

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Assembler

Description:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cabinet assemblies which includes installing cables, subassemblies and circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

• One-year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electrostatic Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and cabinet assemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers
Will not get max pay rate without extensive, stable experience.
Degree not required.
Supervisor is looking for candidates who are mechanically inclined
 
Job Number: CJH-R-6056
Job Location: Clearwater, FL
Rate: $20
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

Chemical Technician

Description:
PDS Tech, Inc. is seeking a Chemical Technician / Formulation Technician in Milwaukee, WI 

How will you make an impact?
The Chemical Technician / Formulation Technician is responsible to



  • perform equipment cleaning,
  • staging of manufacturing materials,
  • manage and handle hazardous waste according to current procedures,
  • maintain accurate physical and electronic inventory levels by correctly issuing materials in the system.


What will you do?



  • Follow established methods and standard operating procedures
  • Prepare chromatographic supports and reagents
  • Packing and un-packing of chromatographic columns.
  • Clean and maintain production equipment, clean and organize storage, laboratory and receiving areas
  • Follows World Class Manufacturing or continuous improvement guidelines to support Operations
  • The position is also responsible for any other duties apparent or assigned


 





    How will you get here?
    Education:



    • Associates degree in Science (Chemistry is preferred) or High School diploma/GED

    Experience:

    • 1-2 years’ active experience in handling chemicals, glassware and equipment
    • Ability to read, understand and follow work instructions. Ability to convey pertinent written and verbal information
    • Basic mathematical skills (including knowledge in use of the metric system, conversions, and calculations)
    • Ability in the use of electronic systems (computer etc.) and MS office (word, excel) knowledge
    • Comfortable in handling chemicals, solvents, and potentially hazardous/bio-hazardous substances
    • Must be available to work overtime, including weekends as production schedule warrants

    Physical Requirements:
    While performing the duties of this job, the employee is frequently required to walk, sit, stoop, stand, bend, kneel, crouch and crawl. Also use hands to finger, handle, manipulate, or feel objects, tools, and controls

    • The employee frequently lifts and/or move 50 pounds and occasionally lift and/or move more than 50 pounds with assistance
    • Specific vision abilities required for this position include close vision, distant vision, depth perception and the ability to adjust focus and differentiate between basic colors.
    • Must understand and comply with RCRA Standards by successfully completing initial training for Hazardous Waste Handling within 90 days of date of hire, comply with standards, and annual training.



     




       
      Job Number: 2110131111
      Job Location: Milwaukee, WI
      Duration: 6 months
      Input Date: 06/21/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Len Foy
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PlmZQAS&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Complex Electronic Hardware Verification Engineers - Aerospace -China.

      Description:
      Complex Electronic Hardware Verification Engineers - Aerospace -China.


      Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Electronic Hardware Verification of complex systems.

      This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


      Required Experience and Qualifications:
      • Simulation test
      • Bachelors Degree or above.
      • Experience in FPGA / ASIC design or verification, proficient in Verilog or SV, enthusiastic about verification.
      • Familiar with Modelsim or questasim.
      • Familiar with Linux system.
      • Experience in TCL, Perl, Makefile, assertion and other languages or scripts is preferred.
      • Users with veri / Debussy, ies / IUS, primetime, conformal, Vincent (CDC tool) and other verification tools are preferred.
      • Familiar with video processing, Ethernet protocol or ARINC664 protocol is preferred.
      • Knowledge of DO254 is preferred.
      • Strong learning ability, problem analysis ability and communication ability.
      Role and Duties:
       
      • Responsible for the development of functional simulation (pre simulation) test cases, including functional simulation test code and script.
      • Responsible for improving the code coverage, so that the statement, branch, condition, expression coverage reaches 100%.
      • Responsible for timing simulation (post simulation), including the simulation of maximum delay and minimum delay.
      • Responsible for writing simulation test step documents, describing the test step execution process and criteria.
      • Responsible for output test report and test summary.
      • Participate in peer review of responsible documents or codes, and other related peer review.

      Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
       
      Job Number: BH-387
      Job Location: China, China
      Rate: Remuneration depending upon experience level
      Per Diem: --
      Overtime: --
      Duration: 1-2 years
      Start Date: 06/28/2021
      Input Date: 06/29/2021
      Last Updated: 07/27/2021
      Firm Name: STRONGFIELD TECHNOLOGIES USA INC
      Attention: Graham Bird
      Address: 5000 BIRCH ST STE 3000
      City, State: NEWPORT BEACH, CA 92660
      Website: www.strongfield.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design and Analysis Engineer

      Description:
      Design and Analysis Engineer

      Job ID # 2021-13761

      Contract Opportunity

      Location: Oklahoma City, OK

      Industry: Aerospace & Defense

      Minimum Clearance: Ability to Obtain Secret Clearance

      Minimum Education: Bachelor's Degree

      Minimum Experience: 5 Years

       

      What You’ll Do:

      Work with customers to develop and document complex electronic and electrical system requirements.
      Analyze and translate requirements into system, hardware and software designs and interface specifications.
      Test and validate to ensure system designs meet operational and functional requirements.
      Monitor supplier performance to ensure system integration and compliance with requirements.
      Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
      Research specific technology advances for potential application to company business needs.
      Collaborate with multiple engineering disciplines in the development, testing, and support of the C-17 platform.
      Responsible for operating the Avionics/Flight Controls simulation laboratories for the C-17 program.
      These laboratories are systems and software development and test facilities for actual and simulated LRU (Line Replaceable Unit) integration and test.
      Responsible for the configuration of the test facility, integration and test of aircraft/simulation software and hardware, and executing test procedures.
      Interfacing with design engineers will be vital, as is defining lab configurations which support requirements needed to test ongoing aircraft enhancements and modernization efforts.
      May actually have to 'fly' the C-17 simulator for trouble shooting or for customer support in a test or maintenance environment.
      Develop solutions to a variety of problems of moderate scope and complexity.

      What You’ll Need:

      Experience with aircraft Systems Integration such as avionics and flight controls
      Experience in testing flight critical systems via simulators and hardware-in-the-loop environment
      Experience in software testing systems (Avionics)
      Preferred Qualifications (Desired Skills/Experience):
      C-17 operations, and data systems
      Working with commercial communication standards such as 1553, RS422, and Ethernet

      *U.S. Citizenship is required by law, regulation, executive order, or government contract.




      Education & Experience:

      Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 5 + years of relevant work experience in an Engineering classification or a Master’s Degree combined with 3 + years of relevant work experience in an Engineering Classification; or a PhD with experience in an Engineering Classification. ABET is the preferred, although not required, accreditation standard.

      What to Expect:

      Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
      Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

       

       

      Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

       

       

      Resources

      For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

      For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

       
       
      Job Number: Job ID # 2021-13761
      Job Location: Oklahoma City, OK
      Rate: Open
      Per Diem: No
      Overtime: Possible
      Duration: 6 Months
      Input Date: 07/21/2021
      Firm Name: MOSELEY TECHNICAL SERVICES INC
      Attention: Brentley Sisk
      Address: 7500 S MEMORIAL PKWY STE 215-R
      City, State: HUNTSVILLE, AL 35802
      Phone: 256/880-0446
      Fax Phone: 256/880-0936
      Website: www.moseleytechnical.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design and Analysis Engineer

      Description:
      Design and Analysis Engineer

      Job ID # 2021-13732

      Contract Opportunity

      Location: Saint Louis, MO

      Industry: Aerospace & Defense

      Minimum Education: Bachelor’s Degree

       

      What You’ll Do:

      Assist with the development and documentation of electronic and electrical system requirements.
      Develop or modify basic hardware and software designs based on defined requirements.
      Perform system tests to verify operational and functional requirements.
      Assist in monitoring suppliers'' performance to ensure compliance with requirements.
      Support resolution of product integration issues and production anomalies.
      Research basic technologies for potential application to company business needs.
      Work on test equipment repairs.
      Look at electrical drawings and fixing obsolesce issues with parts.
      Estimate repairs needed for broken test equipment.
      Coordinate with procurement to get repair parts for support equipment.

      What You’ll Need:

      Read electrical schematics and drawings.
      Experience with support equipment like DMMs, O Scopes, function generators, experience with communication protocols like 1553, RS422 or 232, ARINC 429…

      *U.S. Citizenship is required by law, regulation, executive order, or government contract.




      Education & Experience:

      Bachelor’s, Master or Doctorate of Science from an accredited course of study, in Engineering, Computer Science, Mathematics, Physics or Chemistry. ABET is preferred, although not required, accreditation standard.

      What to Expect:

      Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
      Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

       

       

      Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

       

       

      Resources

      For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

      For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

       
       
      Job Number: Job ID # 2021-13732
      Job Location: St. Louis, MO
      Rate: Open
      Per Diem: No
      Overtime: Possible
      Duration: 6 Months
      Input Date: 07/19/2021
      Firm Name: MOSELEY TECHNICAL SERVICES INC
      Attention: Brentley Sisk
      Address: 7500 S MEMORIAL PKWY STE 215-R
      City, State: HUNTSVILLE, AL 35802
      Phone: 256/880-0446
      Fax Phone: 256/880-0936
      Website: www.moseleytechnical.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Design and Analysis Engineer / Saint Louis, MO

      Description:
      Design and Analysis Engineer 1

      Location: Saint Louis, MO
      Duration: 6+ Months

      Description:
      Assists with the development and documentation of electronic and electrical system requirements. Develops or modifies basic hardware and software designs based on defined requirements. Performs system tests to verify operational and functional requirements. Assists in monitoring suppliers'' performance to ensure compliance with requirements. Supports resolution of product integration issues and production anomalies. Researches basic technologies for potential application to company business needs.

      Working on test equipment repairs. Looking @ electrical drawings and fixing obsolesce issues with parts. Estimating repairs needed for broken test equipment. Coordinating with procurement to get repair parts for support equipment.

      Top 3-5 technical/software skills needed to perform this role/job:
      Read electrical schematics and drawings. Experience with support equipment like DMMs, O Scopes, function generators, experience with communication protocols like 1553, RS422 or 232, ARINC 429

      BSEE (required) bachelors in electrical engineering

      Education / Experience:
      Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
       
      Job Location: St Louis, MO
      Rate: Open
      Per Diem: Split
      Overtime: Possible
      Duration: 6 months
      Start Date: asap
      Input Date: 07/19/2021
      Firm Name: ICONMA LLC
      Attention: Mohamed Zoheb
      Address: 850 STEPHENSON HWY STE 612
      City, State: TROY, MI 48083
      Phone: 248/602-3856
      Website: iconma.com

      ELECTRICAL ASSEMBLER

      Description:
      Displays knowledge of Electrical Theory and usage of NEC and NFPA 79 in the assembly of machines with AC and DC circuits. Reads engineering drawings to assemble, rebuild, and repair electrical components.  Sets up and operates a variety of power tools (such as drill press, band saw and stud welder), to assist in the assembly of machines and components. Works unsupervised and provides training and cross-training to other employees. Coordinates with engineering personnel, and makes changes as required to update print packages.
      ESSENTIAL DUTIES:
      Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electrical equipment.
      Assembles electrical components, sub-assemblies, and systems according to engineering drawings.  Positions and aligns parts in specified relationship to each other.  Mounts assembled components and attaches functional and cosmetic hardware such as caps, clamps and knobs.
      Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures.
      Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves.  Tests for proper sequencing of machine operations. Assists R & D technicians and engineering in developing new equipment.
      Sets up and operates a variety of hand tools such as drill press, saws, shear and break.  Operates tow motor, pallet jack, hoist, pipe bender, pipe threader, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
      Uses business system to enter time spent working on assemblies/sub-assemblies and to complete operations.
      Uses PC to interface with programmable controllers and servo modules, transfer drive parameters and run diagnostics checks.  Must be able to manually load programs into electrical components.
      Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in house testing and field installation of machinery.
      Coordinates with engineering to ensure Engineering Change Requests are submitted.
      Ensures that Engineering Change Orders are processed and assembled.
      Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
      Assists other departments to optimize throughput.
       
      Completion of a Vocational Diploma in an electrical-related field, or equivalent experience or training. Must be computer literate and capable of reading engineering drawings.  Must have tools required to perform daily routines. Must be capable to set up and operate power tools.  Possesses basic knowledge of oscilloscope. Position requires a team player who is quality conscious, industrious and detail oriented. 

      2nd shift Hours:  Mon-Thurs 2:25pm to 12:55am, 4-10's
      3rd Shift Hours:  Mon-Thurs 9:30pm to 8:00am, 4-10's
       
       
      Job Number: 2110126340
      Job Location: Appleton, WI
      Duration: 6 months
      Input Date: 04/12/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tyler Belisle
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PY5lQAG&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Elect Design and Analy Engr

      Description:
      Elect Design and Analy Engr

      Job ID # 2021-13679

      Contract Opportunity

      Location: Tukwila, WA

      Industry: Aerospace & Defense

      Minimum Clearance: Ability to Obtain Secret Clearance

      Minimum Education: Bachelor’s Degree

      Minimum Experience: 9 Years

       

      What You’ll Do:

      Lead analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products.
      Lead development of high-level and detailed designs consistent with requirements and specifications.
      Lead reviews of testing and analysis activity to assure compliance to requirements.
      Identify, track and status technical performance measures to measure progress and ensure compliance with requirements.
      Lead activities in support of Supplier Management with make/buy recommendations and other technical services.
      Coordinate engineering support throughout the lifecycle of the product.
      Plan research projects to develop concepts for future product designs to meet projected requirements.
      Work under minimal direction.

      What You’ll Need:

      Ability to Obtain Secret Clearance
      Thorough understanding of industry-standard electronic design automation (EDA) tools for IC layout and physical verification – e.g. those from Cadence, Mentor Graphics, and Synopsys
      Experience with standard cell development and/or familiarity with structured, pitched, or arrayed layout
      Knowledge of performance analog and high-power layout techniques
      Experience exercising and debugging the IC verification flow (DRC, LVS, XOR, PEX, etc.)
      Demonstrated successful IC designs implemented in advanced commercial semiconductor fabrication process technologies – e.g.. <22nm FinFET), silicon-on-insulator (SOI), and/or silicon germanium (SiGe) processes. Experience with layout techniques for managing IR drop, RC delay, electromigration, self heating and coupling capacitance Preferred Qualifications: Experience with Radiation-Hardened By Design (RHBD) layout techniques Experience with scripting to automate IC layout (e.g. SKILL, Perl, Python) Experience with experimental process technologies (e.g. Gate-all-around FETs (GAAFETs)) *U.S. Citizenship is required by law, regulation, executive order, or government contract. Education & Experience: Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 9 + years of releant work experience; or an equivalent combination of technical education and experience. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. What to Expect: Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications. Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.     Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.     Resources For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/ For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/  
       
      Job Number: Job ID # 2021-13679
      Job Location: Tukwila, WA
      Rate: Open
      Per Diem: No
      Overtime: Possible
      Duration: 6 Months
      Input Date: 07/09/2021
      Firm Name: MOSELEY TECHNICAL SERVICES INC
      Attention: Brentley Sisk
      Address: 7500 S MEMORIAL PKWY STE 215-R
      City, State: HUNTSVILLE, AL 35802
      Phone: 256/880-0446
      Fax Phone: 256/880-0936
      Website: www.moseleytechnical.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Elect Design and Analy Engr 4- Remote JOB

      Description:
      Elect Design and Analy Engr 4

      Location: Hazelwood, MO/ Remote
      Duration: 12 months with possible extension

      Description:
      Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

      Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for Xilinx FPGA based firmware systems. Leads development of code and integration of complex firmware components into a fully functional system. Develops firmware verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure firmware system requirements are met. Provides technical leadership for firmware projects. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads firmware research and development projects. Serves as a subject matter expert for firmware domains, system-specific issues, processes and regulations. Tracks and evaluates firmware team performance to ensure product and process conformance to project plans and industry standards. Trains and mentors others. Works under consultative direction.

      Basic Qualifications (Required Skills/Experience)
      - Bachelor Degree or higher in Engineering, Mathematics or Physics
      - 6+ years’ of experience in Digital FPGA verification, with design experience
      - Verification work experience using Verilog or SystemVerilog, with UVM methodology

      Preferred Qualifications (Desired Skills/Experience)
      - Experience developing Universal Verification Methodology (UVM) compatible testbench components such as predictor, monitor, scorebard and Universal Verification Component (UVC) agents
      - Experience writing UVM virtual sequences and UVC sequences
      - Experience writing SystemVerilog assertion (SVA), and Covergroup/Coverpoints
      - Experience architecting and developing verification methods to verify FPGA level requirements
      - Experience writing simulation plan and generating simulation artifacts
      - Experience in DO-254 verification process
      - Experience in code coverage analysis
      - Experience using Linux or Unix terminal commands
      - Experience with scripting language like Perl and shell script
      - Experience using Revision Control Systems: GIT, BitBucket
      - Experience in running and managing regression, as well as providing regression result traceability to requirements.

      Skill Code: 608-Elect Design and Analysis Engr-General
       
      Job Location: Hazelwood, MO
      Rate: Open
      Per Diem: no
      Overtime: no
      Duration: 12 months
      Start Date: asap
      Input Date: 07/01/2021
      Last Updated: 07/15/2021
      Firm Name: ICONMA LLC
      Attention: Mohamed Zoheb
      Address: 850 STEPHENSON HWY STE 612
      City, State: TROY, MI 48083
      Phone: 248/602-3856
      Website: iconma.com

      Electrical Design & Analysis Engineer

      Description:
      MUST BE US PERSONS - REMOTE WORK IS AN OPTION
      DESIRED EXPERIENCE:
      • VHDL,
      • Xilinx FPGA’s
      • System Verilog
      • UVM
      • FPGA On Target Testing (OTT)
      • DO-254
      • MIL-STD-882E
      • MIL-HDBK-516C
      • Bachelor’s Degree with 5+ years of experience

      INTERVIEW PROCESS:

      The manager is looking to schedule interviews as soon as possible. These will be phone interviews with the Chief Firmware Engineer and the Engineer Manager where they will primarily discuss the candidates experience with VHDL, developing DO-254 processes and experience with On Target Testing.

      JOB DESCRIPTION
      Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

      Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for Xilinx FPGA based firmware systems. Leads development of code and integration of complex firmware components into a fully functional system. Develops firmware verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure firmware system requirements are met. Provides technical leadership for firmware projects. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads firmware research and development projects. Serves as a subject matter expert for firmware domains, system-specific issues, processes and regulations. Tracks and evaluates firmware team performance to ensure product and process conformance to project plans and industry standards. Trains and mentors others. Works under consultative direction.

      This will be a 12 month assignment on a team of 30 where they will be developing requirements, code, and test procedures for safety critical avionics. This opening is open to virtual candidates, as the person selected for this role will not be required to sit on-site.

      TSC LLC is an AA/EOE
       
      Job Location: Hazelwood OR Remote, MO
      Rate: $60-73/hr
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 Months+
      Start Date: ASAP
      Input Date: 06/21/2021
      Last Updated: 09/18/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Chris Sheets
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: ChrisSheets@thestructurescompany.com
      Website: www.thestructurescompany.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design Engineer

      Description:
      An Electrical Design Engineer job in Windsor, CT is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Electrical Engineering and five+ years of related industry experience.
      In this job, you will support requirements, design, development, and testing of components and integrated systems in a faced-paced highly collaborative cross functional team environment.

      Electrical Design Engineer job duties include:
      * Support the definition, decomposition and compliance traceability of requirements for components and subsystems within
      complex systems. Effectively communicate requirements across all technical disciplines and levels of management
      * Define system architecture and conduct trades studies to support optimal product concepts and development
      * Create component level specifications, circuit and component layout/packaging models, perform dynamic
      simulation/analysis of digital, analog, power, and mixed circuit designs
      * Create schematics, define EMI/EMC compliance schema, and specify wiring requirements for power and communication
      systems
      * Facilitate cross functional team collaboration in component development, system optimization, and development of
      certification test program plans
      * Create test plans and procedures for safety critical component and system level verification and validation
      * Monitor design, build, verification and validation efforts, drive team responses as required to keep plan execution to
      established metrics on track.
      * Maintain requirements V&V compliance matrices, generate and present performance reports to client organization
      stakeholders
      * Perform data analysis, root cause determination, and initiate corrective actions for deviation to performance, or schedule
      metrics on the project
      * Generate and present overall project status reports to Belcan and Client organization stakeholders

      Job Qualifications:
      * BS or MS degree in Electrical Engineering or similar
      * At least 5 years experience with highly regulated industry product development, certification, and quality control
      standards (ISO/IEC; 9001,9100, RTCA; DO-160, DO-254, DO-178, MIL-STD; 461,464,704; NFPA-70, UL-1741)
      * Skilled with modeling and analysis, integrated circuit design/layout, wire harness design, requirements compliance
      management. Familiarity with MBSE processes and tools is a plus
      * Knowledge of power generation/conversion/distribution, electrical machines, communication, and control systems
      * Self-motivated, adaptable, highly organized and possess excellent communication/collaboration skills. Project
      management experience is a plus.

      Desired Skills:
      * Advanced understanding of semiconductor devices for power electronics
      * Motor controller design experience
      * Advanced understanding of semiconductor devices for power electronics
      * Motor controller design experience
      * Multidiscipline team building, problem solving, and leadership skills are critical
      * Experience with complex system design, integration, test, and deployment is highly desirable

      If you are interested in this Electrical Design Engineer job in Windsor, CT, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

      Belcan is an equal opportunity employer. EOE/M/F/D/V

      Build a challenging and rewarding career with an industry leader!

      http://belcan.com/
       
      Job Number: 310873
      Job Location: Windsor, CT
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 05/28/2021
      Last Updated: 07/28/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: KevinGesner
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Candidates must have Interim Secret level clearance to Start
      Please be advised that this Request is looking for local/nearby Marion, MA contractors to work at the Marion, MA site until November 2022.
      Will perform FPGA firmware architecture and design.
      Designs will include some digital signal processing, messaging, control and high speed communications.
      Devices will include Xilinx FPGAs, including the Xilinx Kintex 7.
      Will be interfacing with program leadership and teammates on a regular basis.

      Basic qualifications:
      Experience in FPGA architecture and design
      • Applied knowledge of Xilinx devices and their associated application environments.
      • Possess technical expertise to implement designs without appreciable direction.
      • Experience with FPGAs, Microprocessors, DSPs, and Interface Controllers.
      • Successful candidate may develop technical solutions to complex problems which require the regular use of ingenuity and creativity applied to FPGA design and/or board design.
      • Some project leadership experience
      • Excellent oral, written, and presentation skills

      Desired skills:
      • Knowledge of digital signal processing functions, (radar, electronic warfare, and sonar)
      • Extensive VHDL firmware programming capability
      • Xilinx Vivado development
      • Build and test an executable hardware implementation of written code.
      • Use of the Mentor Questasim or Modelsim simulator
      • Experience with MATLAB modeling
      • Any Experience with Higher level code development, (Simulink HDL Coder and/or Xilinx System Generator)
       
      Job Number: CJH-R- 6027
      Job Location: Marion, MA
      Rate: $82
      Per Diem: Yes
      Overtime: Yes
      Duration: 15 Months
      Start Date: ASAP
      Input Date: 07/16/2021
      Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
      Attention: Venkat Mantha
      Address: 687 LEE RD STE 350
      City, State: ROCHESTER, NY 14606
      Phone: 745/473-1137
      Website: www.iic.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Electrical Design Engineer to provide production support and design improvements for a complex high-powered multi-channel analog transmitter used in undersea acoustic sensors.
      Responsibilities will include working with other engineers (Mechanical, Electrical, Software, Test, Manufacturing, and Quality).

      Deliverable Product
      * Experienced or desire to gain experience in troubleshooting analog/power hardware with some elements of digital hardware
      * Familiarity with troubleshooting down to the component level to identify root cause, and fishbone analysis type troubleshooting techniques
      * Expertise in reviewing test data and spotting trends suggesting anomalous performance
      * Firm understanding of electronic parts, and fundamentals of electrical engineering theory
      * Familiarity with spice modelling applications

      People
      * Desire to work closely with Program Office, Quality, manufacturing assemblers, test technicians, and field engineering to help drive product deliveries to the US Navy
      * Skilled at working within a diverse team
      * Capable of leading junior engineers in their day to day assignments
      * Capable of communicating with a broad set of disciplines including manufacturing, quality, test, engineering, team leads, program management, and senior management

      Test Systems
      * Familiarity with test systems design, reviewing electrical and mechanical drawings for test systems and test cables
      * Experienced or desire to become experienced in applications utilizing Test Stand and Labview
      * Desire to create techniques and methods to drive process improvements, and drive workmanship errors/test defects to zero
      * Familiarity with testing and driving product through ambient, vibration, and thermal test environments

      Basic Qualifications :
      Demonstrated experience in industry with
      * Proficiency with electrical engineering design experience
      * Proficiency in troubleshooting of electrical circuitry
      * Proficiency in SPICE-based circuit simulation tools.
      Must have the following experience
      * Power supply design
      * Analog Circuit Card Assembly design and analysis
      * Experience in mixed signal design & A/D conversion, as well as MATLAB experience
      Desired skills :
      The ideal candidate will have experience with:
      * Voltage regulation
      * Power conditioning
      * Designing electronics for acoustic sensors
      * Acoustic systems analysis
      * DC/DC conversion
      * Sensing and control
       
      Job Number: 58672
      Job Location: Marion, Mass
      Duration: 15 months
      Start Date: ASAP
      Input Date: 07/13/2021
      Firm Name: APOLLO PROFESSIONAL SOLUTIONS
      Attention: Rick Nussbaum
      Address: 4010 WATSON PLAZA DR STE 138
      City, State: LAKEWOOD, CA 90712
      800 Phone: 866/277-3343
      Fax Phone: 562/420-7688
      Website: www.apollopros.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      ****Please be advised that this Request is looking for local/nearby Marion, MA contractors to work at the Marion, MA site until November 2022. With good work performance, and if the contractor desires to move to Syracuse, NY, he/she will be invited to apply as a permanent employee, relocating to Syracuse.*****

      Must have Interim Secret level clearance to Start
      Occasional overtime is anticipated.


      Should be competent in performing in-lab troubleshooting of complex analog, digital, and power electronics systems; as well as finding root-cause of failures down to the component level.
      Sound technical skills, communication skills (written and verbal), and have the ability to work independently, are paramount.


      In this role the candidate will work in cross discipline team.
      Proficiency with laboratory experience with DVMs, oscilloscopes, logic analyzers, etc. are required.
      The person must also be capable of resolving obsolete component issues ranging from pin-for-pin drop in replacements, to board design changes.
      Responsibilities include close involvement with systems engineering; development of electrical hardware solutions; troubleshooting issues; test planning; test development; and test execution.

      Basic Qualifications :
      • Experience testing and troubleshooting complex electronics
      • Strong analog and digital design & troubleshooting skills
      • Proficiency with common laboratory engineering tools including logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipment.
      • MS Office suite expertise, High proficiency with multitasking
      • Good verbal, written, and presentation skills

      Desired skills :
      • Military design experience
      • Knowledgeable of system cabling design
      • Knowledgeable in RF communications.
      • Knowledgeable of board layout and IPC Specs
      • Knowledge of electrical/computing system design (servers, switches, power, packaging, custom circuits)
      • Excellent Leadership/Communication/Team Skills
      ____________________
       
      Job Number: 61604
      Job Location: Marion, MA
      Per Diem: No
      Overtime: Possible
      Duration: 15 months
      Input Date: 07/09/2021
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: William Carriveau
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      The candidate should be competent in performing in-lab troubleshooting of complex analog, digital, and power electronics systems; as well as finding root-cause of failures down to the component level.
      Sound technical skills, communication skills (written and verbal), and have the ability to work independently, are paramount.
      In this role the candidate will work in cross discipline team.
      Proficiency with laboratory experience with DVMs, oscilloscopes, logic analyzers, etc. are required.
      The person must also be capable of resolving obsolete component issues ranging from pin-for-pin drop in replacements, to board design changes.
      Responsibilities include close involvement with systems engineering; development of electrical hardware solutions; troubleshooting issues; test planning; test development; and test execution.
      Basic Qualifications :
      * Experience testing and troubleshooting complex electronics
      * Strong analog and digital design & troubleshooting skills
      * Proficiency with common laboratory engineering tools including logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipment.
      * MS Office suite expertise, High proficiency with multitasking
      * Good verbal, written, and presentation skills
      Desired skills :
      * Military design experience
      * Knowledgeable of system cabling design
      * Knowledgeable in RF communications.
      * Knowledgeable of board layout and IPC Specs
      * Knowledge of electrical/computing system design (servers, switches, power, packaging, custom circuits)
      * Excellent Leadership/Communication/Team Skills
      Skills:

      Education: BS+4-8 YRS or MS+2-6 YRS
       
      Job Number: 58637
      Job Location: Marion, Mass
      Overtime: Occassional
      Duration: 15 months
      Start Date: ASAP
      Input Date: 07/09/2021
      Firm Name: APOLLO PROFESSIONAL SOLUTIONS
      Attention: Rick Nussbaum
      Address: 4010 WATSON PLAZA DR STE 138
      City, State: LAKEWOOD, CA 90712
      800 Phone: 866/277-3343
      Fax Phone: 562/420-7688
      Website: www.apollopros.com

      Electrical Engineer - ECU and LRU Design

      Description:
      ABOUT THE JOB:
      Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

      REQUIRED SKILLS:
      • Bachelor’s degree in Electrical Engineering
      • 5+ years Aerospace circuit design experience
      • Control systems and/or supporting component hardware design experience
      • Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
      • Experience developing hardware requirements from system requirements and managing those requirements
      • Engines/Propulsion, APU, or Flight Controls experience
      • Schematic capture
      • In-depth circuit analysis and simulation
      • DOORS proficiency
      • Effective communication skills (both verbal and written)
      • Self-motivated, accountable, detail-oriented

      PREFERRED SKILLS:
      • Engine ECU and LRU familiarity

      Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

      ABOUT THE COMPANY:
      Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

      This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

      RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

      To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
       
      Job Location: Phoenix, AZ
      Rate: Open
      Per Diem: No
      Overtime: Straight Time
      Duration: TBD
      Start Date: ASAP
      Input Date: 08/06/2021
      Last Updated: 09/10/2021
      Firm Name: REAL TIME CONSULTING
      Attention: Kathy Heath
      Address: 20601 N 19TH AVE STE 110
      City, State: PHOENIX, AZ 85027
      Phone: 623/792-8946
      Email: RTC-TalentMgmt@Real-Time-Consulting.com
      Website: www.real-time-consulting.com

      Electrical Engineer - Secret

      Description:
      PDS Tech, Inc. is seeking an Electrical Engineer, in Marion, MA.

      Job Description:

      • The candidate should be competent in performing in-lab troubleshooting of complex analog, digital, and power electronics systems; as well as finding the root cause of failures down to the component level.
      • Sound technical skills, communication skills (written and verbal), and have the ability to work independently, are paramount.
        In this role, the candidate will work in a cross-discipline team.
      • Proficiency with laboratory experience with DVMs, oscilloscopes, logic analyzers, etc. is required.
      • The person must also be capable of resolving obsolete component issues ranging from a pin-for-pin drop in replacements, to board design changes.
      • Responsibilities include close involvement with systems engineering; development of electrical hardware solutions; troubleshooting issues; test planning; test development; and test execution. 
         

      Basic Qualifications:
      • Experience testing and troubleshooting complex electronics
      • Strong analog and digital design & troubleshooting skills
      • Proficiency with common laboratory engineering tools including logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipment.
      • MS Office suite expertise, High proficiency with multitasking
      • Good verbal, written, and presentation skills Desired skills :
      • Military design experience
      • Knowledgeable of system cabling design
      • Knowledgeable in RF communications.
      • Knowledgeable of board layout and IPC Specs
      • Knowledge of electrical/computing system design (servers, switches, power, packaging, custom circuits)
      • Excellent Leadership/Communication/Team Skills
      Candidates must have Interim Secret level clearance to Start 
      • BS+4-8 YRS or MS+2-6 YRS

       
      Job Number: 2110134569
      Job Location: Marion, MA
      Duration: 8 months
      Input Date: 07/07/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Gus Sanchez
      Address: 1215 FERN RIDGE PKWY STE 231
      City, State: ST LOUIS, MO 63141
      Phone: 314/628-9143
      800 Phone: 800/472-3737
      Fax Phone: 314/628-9485
      Email: cecjstlouis@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pw11QAC&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical/Analog Design Engineer

      Description:
      An Electrical/Analog Design Engineer job in McLeansville, NC is currently available through Belcan. In this role, you will participate in electrical requirements analysis and definition, functional analysis, performance analysis (e.g. timing, power, etc.), design, integration and verification of electrical components, equipment and systems. You will also plan and lead electrical engineering root cause analysis as well as develop and present electrical requirements and results to internal management and customers. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering, a related specialized area or field is required plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

      Electrical/Analog Design Engineer Job duties:
      * Solid use of electrical engineering concepts, principles, and theories
      * Proven knowledge of electrical engineering processes and design tools
      * Circuit Design expertise
      * Analog design and instrumentation (design and analysis)
      * Power systems / Module design. Experience should include multiple power topology design experience from few watts to KW+ converters.
      * Feedback / Control systems experience
      * Power System architecture and grounding
      * Isolated Switching Converters
      * Transmission Line Effects in power systems
      * EMI test and control methods (MIL-STD-461, FCC / IDE / VDE, etc)
      * Magnetics Design and High Speed Design experience are desirable
      * Strong troubleshooting ability: must be able to diagnose a problem by narrowing the point of failure sequentially through components
      * The use of specialized laboratory equipment such as spectrum analyzers, oscilloscopes, and other test equipment for development, testing, and troubleshooting
      * Experience in writing specifications, requirements, and verification procedures for complex electronic systems and components
      * Ability to travel as needed


      Qualifications:
      * A Bachelor's degree in Electrical Engineering, a related specialized area or field is required plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience
      * Schematic capture (Mentor Graphics or similar electronic design tools)
      * Embedded firmware (C, C++)
      * FPGA Design - VHDL (Xilinx)
      * Sensor control & management
      * Familiarity with Radio frequency (RF) communications systems
      * Familiarity with Fiber Optic Communications Systems
      * Familiarity with Power supply and high voltage direct current (DC) design, development, qualification, and testing
      * Master's Degree in Electrical or Computer Engineering


      If you are interested in this Electrical/Analog Design Engineer position in McLeansville, NC please apply via the 'apply now' link provided.
      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 314444
      Job Location: Mc Leansville, NC
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 07/20/2021
      Last Updated: 08/12/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: FrancisOsolnick
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical/Analog Design Engineer

      Description:
      Electrical/Analog Design Engineer

      Job ID # 2021-13734

      Contract Opportunity

      Location: McLeansville, NC

      Industry: Aerospace & Defense

      Minimum Clearance: Ability to Obtain Secret Clearance

      Minimum Education: Bachelor’s Degree

      Minimum Experience: 5 Years

       

      What You’ll Do:

      Participate in electrical requirements analysis and definition, functional analysis, performance analysis (e.g. timing, power, etc.), design, integration and verification of electrical components, equipment and systems.
      Plan and lead electrical engineering root cause analysis as well as develops and presents electrical requirements and results to internal management and our customers.

      What You’ll Need:

      Ability to Obtain Secret Clearance
      Solid use of electrical engineering concepts, principles, and theories
      Proven knowledge of electrical engineering processes and design tools
      Circuit Design expertise
      Analog design and instrumentation (design and analysis)
      Power systems / Module design.  Experience should include multiple power topology design experience from few watts to KW+ converters.
      Feedback / Control systems experience
      Power System architecture and grounding
      Isolated Switching Converters
      Transmission Line Effects in power systems
      EMI test and control methods (MIL-STD-461, FCC / IDE / VDE, etc)
      Magnetics Design and High Speed Design experience are desirable
      Strong troubleshooting ability: must be able to diagnose a problem by narrowing the point of failure sequentially through components
      The use of specialized laboratory equipment such as spectrum analyzers, oscilloscopes, and other test equipment for development, testing, and troubleshooting
      Experience in writing specifications, requirements, and verification procedures for complex electronic systems and components
      Ability to travel as needed
      Creative thinking with the ability to multi-task
      Keeps abreast of technology trends
      Effectively handle complex assignments independently or in multiple work groups
      Ability to sell concepts and ideas to project leaders, program manager and customers
      Qualifications Preferred:
      Schematic capture (Mentor Graphics or similar electronic design tools)
      Embedded firmware (C, C++)
      FPGA Design - VHDL (Xilinx)
      Sensor control & management
      Familiarity with Radio frequency (RF) communications systems
      Familiarity with Fiber Optic Communications Systems
      Familiarity with Power supply and high voltage direct current (DC) design, development, qualification, and testing  
      Master’s Degree in Electrical or Computer Engineering

      *U.S. Citizenship is required by law, regulation, executive order, or government contract.




      Education & Experience:

      Bachelor’s Degree in Electrical Engineering, a related specialized area or field combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + years of relevant work experience.

      What to Expect:

      Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
      Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

       

       

      Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

       

       

      Resources

      For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

      For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
       
      Job Number: Job ID # 2021-13734
      Job Location: McLeansville, NC
      Rate: Open
      Per Diem: No
      Overtime: Possible
      Duration: 12 Months
      Input Date: 07/19/2021
      Firm Name: MOSELEY TECHNICAL SERVICES INC
      Attention: Brentley Sisk
      Address: 7500 S MEMORIAL PKWY STE 215-R
      City, State: HUNTSVILLE, AL 35802
      Phone: 256/880-0446
      Fax Phone: 256/880-0936
      Website: www.moseleytechnical.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electro Mechanical Engineer

      Description:
      Description:
      Electro-Mechanical Engineer to perform cable harness and electronics packaging design for a missiles program starting as soon as possible.
      The engineer will be responsible for cable drawings and routing for the Seeker Wire Harness redesign.
      Responsibilities will include coordination with SME's to specify harness design and material selection and work with vendors to identify applicable components.
      Tasks will include cable design, drawing updates and release, parts and material definition.

      Mandatory:
      Must sit onsite at the facility.
      Must be USC.
      Active secret required to start.
      Familiarity with military electrical/electro-mechanical components and their selection.
      Creo.
      Windchill.
      Harness design, and drawing release process.
      Requires 5+ years of experience.
       
      Job Number: CJH-M-3199
      Job Location: Orlando, FL
      Rate: $90
      Per Diem: Yes
      Overtime: Yes
      Duration: 9 Months
      Start Date: ASAP
      Input Date: 07/15/2021
      Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
      Attention: Venkat Mantha
      Address: 687 LEE RD STE 350
      City, State: ROCHESTER, NY 14606
      Phone: 745/473-1137
      Website: www.iic.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electro Mechanical Engr Level 3

      Description:
      Indotronix is looking for an Electro-Mechanical Engineer to perform cable harness and electronics packaging design for a missiles program starting as soon as possible. The engineer will be responsible for cable drawings and routing for the Seeker Wire Harness redesign. Responsibilities will include coordination with SME's to specify harness design and material selection and work with vendors to identify applicable components. Tasks will include cable design, drawing updates and release, parts and material definition.

      Mandatory:
      • Must sit onsite at the facility.
      • Active secret required to start.
      • Familiarity with military electrical/electro-mechanical components and their selection.
      • Creo.
      • Windchill.
      • Harness design, and the LM drawing release process.
      • Requires 5+ years of experience.
       
      Job Number: CJH-99-CM
      Job Location: orlando, FL
      Rate: $90 per hour on W2
      Per Diem: split
      Overtime: Yes
      Input Date: 07/15/2021
      Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
      Attention: Venkat Mantha
      Address: 687 LEE RD STE 350
      City, State: ROCHESTER, NY 14606
      Phone: 745/473-1137
      Website: www.iic.com

      Electro-physics Engineer/Scientist 4

      Description:
      PDS Tech, Inc. is seeking an Electro-physics Engineer/Scientist in Berkeley, MO.

      Description:

      • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
      • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
      • Develops architectures to integrate multiple systems into higher level systems and platforms.
      • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
      • Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements.
      • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
      • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
      • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
      • Writes appropriate sections of proposals to support development of new business
      • Provides general mentorship

      Additional Responsibilities Include:

      • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      • Develops architectures to integrate systems and components into higher level systems and platforms
      • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      • Defines and conducts tests to validate performance of designs to requirements
      • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      • Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      • Writes appropriate sections of proposals to support development of new business
      • Provides general mentorship

      Basic Qualifications (Required Skills/Experience):
      • Posses a Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree
      • Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)
      • Willing to Travel Domestically and internationally as needed

      Preferred Qualifications (Desired Skills/Experience):

      • B.S Degree or higher in Electrical/Aerospace Engineering or Physics
      • Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      • Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      • Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      • Experience working within an engineering organization
      • Experience with lightning testing and analysis

      Typical Education/Experience:

      • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

       
      Job Number: 2110133294
      Job Location: Saint Louis, MO
      Duration: 12 months
      Input Date: 06/17/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Elisa Petersen
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ps2SQAS&URLSource=cjhunter

      Electro-physics Engineer/Scientist 5

      Description:
      PDS Tech, Inc. is seeking an Electro-physics Engineer/Scientist in Berkeley, MO

      Description:

      • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
      • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
      • Develops architectures to integrate multiple systems into higher level systems and platforms.
      • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
      • Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements.
      • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
      • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
      • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
      • Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business.
      • Works under consultative direction.

      Additional Responsibilities Include:

      • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      • Develops architectures to integrate systems and components into higher level systems and platforms
      • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      • Defines and conducts tests to validate performance of designs to requirements
      • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      • Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      • Writes appropriate sections of proposals to support development of new business
      • Provides general mentorship

      Basic Qualifications (Required Skills/Experience):
      • Posses a Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree
      • Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)
      • Willing to Travel Domestically and internationally as needed

      Preferred Qualifications (Desired Skills/Experience):

      • B.S Degree or higher in Electrical/Aerospace Engineering or Physics
      • Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      • Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      • Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      • Experience working within an engineering organization
      • Experience with lightning testing and analysis
      • Previous experience with RF systems and antenna simulation, integration, and testing
      • Experience with complex electromagnetic and RF modeling and simulation tools such as Ansys EMIT or Altair FEKO

      Typical Education/Experience:

      • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

       
      Job Number: 2110133293
      Job Location: Saint Louis, MO
      Duration: 12 months
      Input Date: 06/15/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Elisa Petersen
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ps2NQAS&URLSource=cjhunter

      Electronic Assembler

      Description:
      ASSEMBLERS NEEDED ALL SHIFTS
      MULTIPLE POSITIONS AVAILABLE
       
      We are currently in need Electronic Assemblers for a top company in Clearwater, FL.

      1st Shift - 6:00 am - 2:30 pm / M-Fr
      2nd Shift -  2:00p-10:30p / M-Fr
      3rd Shift - 10:00 p - 6:30 am / M-Fr
      Weekends Only - (Fri/Sat/Sun) Days 6a-7p or Nights 6p-7a 

       6-12 Month, Temp to Hire
      Paid Weekly on Fridays
      Benefits eligible after 90 days

       
      Job Details:
      • Performs standard testing processes on a variety of equipment and records and analyzes results.
      • Relies on limited experience and judgment to plan and accomplish goals.
      • Performs a variety of tasks.
      • Works under direct supervision.
      • A certain degree of creativity and latitude is required.
      • Typically reports to a supervisor.
      • Lifting is generally at or below 30Lbs. without significant repetitions.

      Prerequisites:
      • Requires a high school diploma or its equivalent
      • US Citizenship required
      • Prior electronic assembly experience preferred
      • Excellent hand-eye coordination
      • Attention to detail
      • Ability to lift at least 15 lbs

       
      Job Number: 2110126855
      Job Location: Clearwater, FL
      Duration: 6 months
      Input Date: 05/24/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Casey Carrion
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PZsNQAW&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronics Engineer

      Description:
      The candidate will perform engineering analysis and evaluation of piece parts procured for use in product design and manufacture, including Space applications. The candidate will also ensure that specified piece parts adequately fulfill engineering and program requirements and provide for control and standardization of parts. Other responsibilities include:
      Analyzes engineering and program requirements for parts and their application.
      Analyzes requirements to ensure that parts are not over or under specified and maintains consistency with engineering intent.
      Supports part selection activities during design and development.
      Performs part research for other functions and interfaces directly with part suppliers.
      Prepares and revises part procurement specifications for definition and control purposes to facilitate part/material acquisition.
      Supports supplier management and material procurement activities

      Familiarity with aerospace design and manufacturing environments.
      Knowledge of military specifications and standards
      Knowledge of aerospace manufacturers products, part selection processes, and specifications.
      Excellent oral and written communications, and familiarity with MS Office applications
       
      Job Number: 36629
      Job Location: NY
      Rate: Open
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mos +
      Start Date: ASAP
      Input Date: 07/14/2021
      Firm Name: PANTHER GROUP
      Attention: Marques
      Address: 5 MILL AND MAIN PL STE 430
      City, State: MAYNARD, MA 01754
      Phone: 781/790-7900
      800 Phone: 800/776-0562
      Fax Phone: 781/672-2570
      Website: www.thepanthergrp.com

      Electronics Technician

      Description:
      PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


      In your role, you will:
      • Assemble electrical or electronic systems and support structures.
      • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
      • Hand solder components under a microscope.  Fine pitch soldering experience is required.
      • Use hand tools and work instructions to assemble units according to product specifications.
      • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

      Qualifications:
      • Fine pitch soldering experience is required is a plus 
      • 5 years experience in electronics assembly preferred.
      • Must have a High School Diploma or GED
      • Associates degree in Electronics or Engineering Technology desired.

      Desired Certifications:

      • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
      • IPC-7711/7721: Rework and Repair of Electronic Assemblies
      • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

      Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

      Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

       
       
      Job Number: 1610047076
      Job Location: Clearwater, FL
      Per Diem: No
      Duration: 12 months
      Input Date: 06/30/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Clyde Callwood
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronics Technician

      Description:
      Must have Active DOD Secret Clearance
      Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
      Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.
      Works from schematics, engineering drawings and written or verbal instructions.
      Operates related equipment; conducts tests and reports data in prescribed format.
      Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed.

      Requirements:
      Candidate MUST be solder certified to IPC-610 and J-STD
      Must be familiar with operation of electronic lab equipment (oscilloscope, spectrum analyzers, wave form generators etc.)
      Must be able to build cables and bread boards from engineering sketches and verbal instructions
      Must be able to troubleshoot printed circuit boards to component level
      Must have good problem solving skills
      Must be able to work independently with minimal supervision
      Must have active DOD Clearance at Secret Level
      Must have an Associate’s degree OR 5 years minimum experience.

      Desired Experience:
      Experience with underwater vehicles, torpedo and sonar electronics
      Experience with RF troubleshooting
      Experienced with MS Office
       
      Job Number: CJH-R- 5967
      Job Location: Marion, MA
      Rate: $43
      Per Diem: Yes
      Overtime: Yes
      Duration: 12 Months
      Start Date: ASAP
      Input Date: 07/16/2021
      Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
      Attention: Venkat Mantha
      Address: 687 LEE RD STE 350
      City, State: ROCHESTER, NY 14606
      Phone: 745/473-1137
      Website: www.iic.com

      Electrophysics Engineer/Scientist 5 - Electromagnetic Compatibility

      Description:
      **This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.**

      Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.

      Additional Responsibilities Include:
      •Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      •Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      •Develops architectures to integrate systems and components into higher level systems and platforms
      •Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      •Defines and conducts tests to validate performance of designs to requirements
      •Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      •Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      •Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      •Writes appropriate sections of proposals to support development of new business
      •Provides general mentorship
      Basic Qualifications (Required Skills/Experience):
      •Posses a Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree
      •Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)
      •Willing to Travel Domestically and internationally as needed

      Preferred Qualifications (Desired Skills/Experience):
      •B.S Degree or higher in Electrical/Aerospace Engineering or Physics
      •Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      •Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      •Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      •Experience working within an engineering organization
      •Experience with lightning testing and analysis
      •Previous experience with RF systems and antenna simulation, integration, and testing
      •Experience with complex electromagnetic and RF modeling and simulation tools such as Ansys EMIT or Altair FEKO

      Typical Education/Experience:
      Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
       
      Job Number: 374924
      Job Location: Berkeley, MO
      Rate: TBD
      Duration: 12 - months
      Start Date: ASAP
      Input Date: 06/16/2021
      Last Updated: 09/18/2021
      Firm Name: CTS INTERNATIONAL
      Address: 160 NW GILMAN BLVD STE 250
      City, State: ISSAQUAH, WA 98027
      Phone: 425/451-0051
      Fax Phone: 425/635-7630
      Email: cjhunter@ctsinternational.com
      Website: www.ctsinternational.com

      Embedded Software Engineer

      Description:
      PDS is seeking an Embedded Software Engineer for an open position in Ft. Worth, TX

      The 429 Embedded Software Engineer will be responsible for (but not limited to) the following:
      • Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
      • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
      • Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
      • Develop and update requirements and verification traceability
      • Conduct software integration and testing on target hardware
      • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
      • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
      • Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

      Education Requirements: 
      • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred.  Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
      • Master’s Degree in the Engineering disciplines mentioned above is suggested

       Position Requirements: 

      • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
      • Experience with DO-178 Level A software or other embedded software development and testing is required.
      • Experience with Flight Controls Computer Software.
      • Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
      • Experience with Primary Development Environment:
        • MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
        • C/C++ code
        • C# test scripts
        • Serena Dimensions / PVCS
        • Git
        • Embedded Software Development environments


       
      Job Number: 2010119389
      Job Location: Fort Worth, TX
      Per Diem: No
      Duration: 12 months
      Input Date: 05/25/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P8RqQAK&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Embedded Software Engineer

      Description:
      An Embedded Software Engineer job in Phoenix, AZ is currently available through Belcan. The Embedded Software Engineer will work with a small, high-performance team to develop new products and technology with a strong focus on design requirements, performance, improvement, reliability, manufacturing, and project completion. To be considered for this position you will need a Bachelor's Degree in Computer Engineering, Computer Science or equivalent plus a minimum of 5 years of experience in development of software/firmware for electronic products.

      Job Duties:
      * Proven experience developing and implementing software for embedded devices and systems
      * Proficiency with software configuration and management tools, defect tracking tools and peer review
      * Knowledge of best practices for full software development life cycle, including coding standards, code reviews, source control management, build processes, testing and operation
      * Proven ability to work with complex algorithms and data structures, write code from the ground up, and test and improve existing code
      * Application architecture and design patterns
      * Experience in development of distributed/scalable systems
      * Graphical User Interfaces

      Qualifications:

      * BS Computer Engineering, Computer Science or equivalent.
      * Minimum 5 years' experience in development of software/firmware for electronic products.
      * Ability to read schematics and data sheets for components.
      * Software and firmware for microcontrollers, wireless communications devices, battery management, machine controls, etc.
      * OS coding including real time operating systems (RTOS).
      * Communication protocols including UDP, TCP/IP, Modbus, SFTP, IMAP, Ethernet, IoT protocols and standards.
      * C++, C, Java, Python, assembly language.
      * Knowledge of application programming interface (API).
      * Experience with digital control systems.
      * Knowledge of quality and reliability engineering principles.
      * Experience working with suppliers.


      If you are interested in the Embedded Software Engineer job in Phoenix, AZ, please apply via the link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 313554
      Job Location: Phoenix, AZ
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 06/18/2021
      Last Updated: 08/04/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Engineering Technician 3

      Description:
      An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

      Engineering Technician 3 duties:

      * Support engineering activities such as, test, check-out, modification, fabrication and assembly of
      prototype electro mechanical systems, experimental design circuitry, or specialized test
      equipment.
      * Assemble, test, and debug test fixtures and informal test procedures.
      * Perform calibration checks on electronic instruments; troubleshoot an electronics system to
      determine cause and remedy for malfunctioning.
      * Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
      perform testing, checkout and trouble-shooting functions with minimum supervision.
      * Perform compliance testing to industry and customer-defined requirements on new and legacy
      electromechanical devices.
      * Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
      test programs, oscilloscopes, signal generators and specialized test apparatus.
      * Provide work leadership to lower level technicians.
      * Perform other duties as assigned.

      EDUCATION AND EXPERIENCE REQUIRED

      * Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
      schooling and experience required.
      * Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
      testing.
      * Aptitude and experience in board level testing and component level troubleshooting, repair, and
      rework.
      * Experience in using computer based tools and procedures to perform, document, and track
      testing.
      * Must have experience with power supplies and logic systems.
      * Excellent test and troubleshooting skills and independent judgment.
      * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
      lawfully admitted into the U.S. as a refugee or granted asylum.

      If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 313811
      Job Location: Kirkland, wa
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 06/30/2021
      Last Updated: 09/15/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Environmental Validation Engineer

      Description:
      PDS Tech Inc., is seeking an Environmental Validation Engineer in Troy, MI

      Overview:
      Responsible for Environmental Validation activities from RFQ to final customer’s acceptation.
      The Environmental Validation Engineer leads the environmental test activities according to the company’s rules and international standards.

      Responsibilities:
      • Responsible for determining the scope and needs of Environmental tests.
      • Responsible to book resources (Chambers, external l ab)
      • Realize the test (electrical, mechanical, environmental, reliability) in the standard time and in line with the instruction sheet (test specification) and according to projects and customer’s milestones.
      • Defines environmental test cases according to requirements and Environmental test standards.
      • Develops, maintains and drives Environmental Test Plan and Environmental Test Specification to approval.
      • Prepare and review of the environmental test reports.
      • Explains and discusses the environmental test results with the project team and customers.
      • Reports status and problems to the Project team, R&D PTM, and other Metiers.
      • Prepares FVS (Fixe, Variable, Specific) check from Environmental Validation perspective.
      • Performs Environmental Validation risk analysis.
      • Maintain up to date Dashboard and Environmental Tool calendar.
      • Provide work instruction to test houses to enable efficient transfer of test equipment.
      • Contribute to product problems solving, support 5W2H / PDCA.
      • Contribute to the improvement of the laboratory’s tools such as: Instruction sheets, logs, development and validation tools.
      • Improve test efficiency
      • Carry out all work to comply with Quality Management System and Validation Engineering Processes e.g. ASPICE, ISO/IATF16949.
      • Coordinate logistics of test racks from and company’s local laboratory and other laboratories worldwide.
      • Track all equipment sent off site with Tracking number to be kept on file.


       
      Qualifications:
      • Bachelor’s in computer science, electrical or mechanical engineering.
      • Min. 2 years’ experience and knowledge of test & validation methods in the automotive industry
      • Knowledge of automotive electronics systems
      • Proficient with MS Office / Google Suite.
      • Basic knowledge in National Instruments LabVIEW and TestStand software - Certified LabVIEW
      • Basic knowledge instrumentation interfacing over PXI, PCI, USB, RS232 & GPIB
      • Basic knowledge in hardware and peripherals
      • Ability to read, analyze and interpret complex documents /schematics.
      • Basic knowledge of automotive electronics systems
      • Validation experience with knowledge of test & validation methods
      • Basic knowledge of accelerated life testing
      • Basic knowledge of IATF 16949


       
       
      Job Number: 2110124764
      Job Location: Troy, MI
      Duration: 12 months
      Input Date: 05/24/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jack Beard
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PT3rQAG&URLSource=cjhunter

      Fabrication Specialist A

      Description:
      Chipton-Ross is seeking 10 Fabrication Specialist A's for an opening in Salt Lake City, UT.

      RESPONSIBILITIES:
      Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

      EDUCATION:
      Accredited High school diploma or GED and typically 1 or more years related experience or an equivalent combination of education and experience.

      FULL TIME/FIRST SHIFT
      WORK HOURS: 8:00 AM - 5:00 PM
       
      Job Number: 191966
      Job Location: Salt Lake City, UT
      Rate: $DOE
      Duration: 6 Months
      Input Date: 06/15/2021
      Last Updated: 09/19/2021
      Firm Name: CHIPTON ROSS
      Attention: Cody Reposa
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: creposa@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Gen Electro/Mech Assm Spec

      Description:
      Gen Electro/Mech Assm Spec

      Job ID # 2021-13720

      Contract Opportunity

      Location: Germantown, MD

      Industry: Aerospace & Defense

      Minimum Education: High School Diploma/GED

      Minimum Experience: 7 years

       

      What You’ll Do:

      Perform complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies.
      Perform rework, repair and modification to parts and assemblies.
      Present statistical data to team for analysis and problem resolution.
      Provide complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists.
      Coordinate with manager and other departments to coordinate work flow and resolve issues.
      Perform complex rework, repair and modification to parts and assemblies.
      Assemble and deliver kits. Performs simple receiving and inspections procedures on incoming materials.
      Document inspection results in accordance with applicable procedures.
      Coordinate with management or other departments to establish work priorities.
      Update work status documentation.
      Work under minimal supervision.
      Perform complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
      Perform complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
      Coordinate with supervisor and other departments to coordinate work flow and resolve issues.
      Coordinate with supervisor to establish work priorities.
      Work under minimal supervision.

      What You’ll Need:

      More than 5 years of experience in electronics and electro-mechanical assemblies.
      More than 5 years of experience in a manufacturing or assembly environment.
      More than 5 years of experience performing soldering and electronics repair to the component level.
      More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.
      Preferred Qualifications:
      Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.

      *U.S. Citizenship is required by law, regulation, executive order, or government contract.




      Education & Experience:

      High School Diploma/GED combined with 7 + years of relevant work experience; or an equivalent combination of education and experience.

      What to Expect:

      Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
      Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

       

       

      Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

       

       

      Resources

      For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

      For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
       
      Job Number: Job ID # 2021-13720
      Job Location: Germantown, MD
      Rate: Open
      Per Diem: No
      Overtime: Possible
      Duration: 6 Months
      Input Date: 07/16/2021
      Firm Name: MOSELEY TECHNICAL SERVICES INC
      Attention: Brentley Sisk
      Address: 7500 S MEMORIAL PKWY STE 215-R
      City, State: HUNTSVILLE, AL 35802
      Phone: 256/880-0446
      Fax Phone: 256/880-0936
      Website: www.moseleytechnical.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Hardware Engineer

      Description:
      A Hardware Engineer job in Phoenix, AZ is currently available through Belcan. The Hardware Engineer will work with a small, high-performance team to develop new products and technology with a strong focus on design requirements, performance, improvement, reliability, manufacturing, and project completion. To be considered for this position you will need a Bachelor's Degree in Electrical Engineering or equivalent plus a minimum of 5 years of experience in development of electronic products.

      Job Duties:
      * Proven experience bringing products to completion on time and on budget.
      * Ability to read schematics and data sheets for components.
      * Knowledge of IOT, SOC and related communication protocols, Wi-Fi, MQTT, Bluetooth etc.
      * Experience working with firmware designers to refine implementations.

      Qualifications:
      * BS Electrical Engineering or equivalent.
      * At least 5 years' experience in development of electronic products.
      * Experience trouble-shooting boards and systems.
      * Experience preparing supporting documents and bills of material.
      * Experience designing analog and digital circuits for feedback-control based power regulation and motor control.
      * Circuit simulation, PCB layout and optimization, reliability evaluation and low noise circuit design utilizing both analog and digital circuitry hardware CAD such as ORCAD EDA capture.
      * Knowledge of Application Programming Interfaces.
      * Experience with digital control systems.
      * Programming experience.
      * Background in power engineering.
      * Knowledge of quality and reliability engineering principles.
      * Experience with specification of components.
      * Knowledge of standards and codes such as UL and NEC.
      * Experience working with suppliers.

      If you are interested in the Hardware Engineer job in Phoenix, AZ, please apply via the link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 313555
      Job Location: Phoenix, AZ
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 06/18/2021
      Last Updated: 08/04/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Helicopter Product Integrity and Quality Control Inspectors (A&P)

      Description:
      PDS Tech is seeking Helicopter Product Integrity and Quality Control Inspectors (A&P) in Coatesville PA

      The ideal candidate will perform the inspection of demonstrator and production aircraft for functional operation and conformance to government and company standards and specifications.

      They will:
      • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.
      • Perform preflight and postflight inspections in accordance with standard procedures on flight-proven aircraft.
      • Inspect any adjustments, repairs, or modifications made on the aircraft.
      • Monitor and verify quality in accordance with statistical process or other control procedures.


      Familiarity with Sikorsky S92 or H92 model aircraft is preferred.

      Minimum 5 years rotorcraft inspection A&P license is required
       

       
      Job Number: 2010122500
      Job Location: Coatesville, PA
      Duration: 9 months
      Input Date: 02/18/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Stephanie Spolzino
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PILCQA4&URLSource=cjhunter

      Inspector

      Description:
      PDS Tech, Inc. is hiring for an  Electronic Inspector to work at the Honeywell - Clearwater, FL location.
      1st Shift Opening

      **New Hire Bonus: Earn up to $2k Bonus in first 90 days!**

      Job Details:
      • Performs quality control inspections, checks, and tests during the manufacture of products.
      • Inspects materials, parts and products at different stages of production.
      • Records observations and may make recommendations for improving processes.
      • Relies on limited experience and judgment to plan and accomplish goals.
      • Performs a variety of tasks.

      Job Requirements:
      • High School Diploma or GED Required
      • 4-6 years of related electronic inspection experience
      • Prior Soldering / Assembly experience a plus
      • Familiar with standard concepts, practices, and procedures within a particular field.
      • US Citizenship Required
      • Vision Test will be required

       
      Job Number: 2110135273
      Job Location: Clearwater, FL
      Duration: 6 months
      Input Date: 07/20/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Casey Carrion
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PyOGQA0&URLSource=cjhunter

      Instrument Technician

      Description:
      Chipton-Ross is seeking an Instrument Technician for an opening in Torrance, CA.

      RESPONSIBILITIES:
      Need for an experienced INSTRUMENT TECHNICIAN to calibrate electronic equipment used to support manufacturing operations. Will calibrate a variety of items including ESD workstations, power supplies, DVMs, power meters, lab standards, RF and high-voltage systems, and test stations used for RF amplifier and power component testing.


      REQUIREMENTS:
      At least five years of experience performing equipment calibration
      AC/DC calibration experience verifying voltage, current, and resistance measurements of test equipment and standards
      Ability to troubleshoot equipment, utilizing schematics to carry out required equipment adjustments and minor repairs, is preferred
      Proficient in Ohms Law theory and measurement calculations
      PC proficiency using Microsoft Word and Excel
      Effective written and verbal communication skills are required
      Ability to work well in a team environment
      Understanding of Mil Standard 45662A and ANSI Z540 calibration system requirements
      Experience writing and/or modifying calibration procedures
      Some computer programming experience would be helpful


      EDUCATION:
      An associate's degree in electronics is preferred

      SHIFT:
      9/80
      7AM-4:30PM


      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.





       
      Job Number: 190276
      Job Location: Torrance, CA
      Rate: $30 to $36.00 DOE
      Duration: 5 months
      Input Date: 03/29/2021
      Last Updated: 09/19/2021
      Firm Name: CHIPTON ROSS
      Attention: Juan Saldarriaga
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jsaldarriaga@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Integration Engineer

      Description:
      An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

      Integration Engineer 2 duties:

      * Develop and perform circuit card level and unit level testing to ensure a successful product
      delivery to customer's aircraft.
      * Develop and document test equipment to support lab testing.
      * Provide technical assistance to senior staff in support of current programs.
      * Prepare and review custom test equipment drawings and designs, using electrical and
      mechanical hardware and software, with guidance from other engineers, to enable test of
      aircraft electrical power equipment.
      * Analyze and solve a variety of technical problems through use of test data and specification
      requirements. Organize and analyze data and document results. Review results to ensure their
      accuracy and appropriateness.
      * Prepare and present technical information of limited scope for internal engineers, program
      personnel, and other internal customers.
      * Acts as an individual contributor, building stable working relationships internally through tasks
      and assignments.
      * Guide internal technicians as required in performing system integration and development tests
      and custom test equipment build.

      EDUCATION AND EXPERIENCE REQUIRED:

      * Electrical engineering background with a BSEE degree.
      * 2 plus years of experience
      * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
      lawfully admitted into the U.S. as a refugee or granted asylum.

      If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


       
      Job Number: 313425
      Job Location: Kirkland, WA
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 06/24/2021
      Last Updated: 08/02/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Jr Truck/Electronics Technician

      Description:
      PDS Tech, Inc. is seeking a Jr Truck Technician in Portland, OR.

      Overview:
      If you have an entrepreneurial spirit and passion for Technology challenges; and use your creativity to bring solutions oriented implementations forward you are meant for this team. You will be part of the team who pushes the industry standards regarding autonomous vehicle development to the next level. This is your chance to join us as we define the next chapter of the trucking industry. We can’t wait to hear from you!

      Responsibilities:
      In this position, you will be part of the team of vehicle experts that rebuild, and build Freightliner vehicles for autonomous use. You will be handling state of the art Mechatronics equipment and build up highly complex machines. In order to be successful you will be able to align and perform within a team that is working on the best possibly assembly solution considering electronics, wiring, and mechanics. Also, you will support our Engineers with test equipment and custom build ups, trouble shooting, issue tracking and documentation.



       
      Qualifications:


      • Experience with Mechanic and Electronic equipment
      • Diagnostics and troubleshooting experience
      • Microsoft Office tool set
      • Build up wire harnesses and/or mechatronic systems
      • Ability to read, assess, and execute base on complex schematics and drawings
      • Passionate about learning and Technology
      • CDL preferred
      • Trucking and Freightliner experience preferred
         

       
      Job Number: 2110125481
      Job Location: Portland, OR
      Duration: 24 months
      Input Date: 02/22/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Melissa Cuellar
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PVCfQAO&URLSource=cjhunter

      LIDAR Tech II

      Description:
      PDS Tech, Inc. is seeking a LIDAR Technician II in Carpinteria, CA

      Overview: 
      The Systems Engineering Department of the ADAS Business Unit NAFTA conducts system level testing of lidar sensors for sample production in support of product development for OEM projects. This includes meeting OEM Customer performance requirements which are verified Bench level (L2) Test Stations testing and comparing this performance against defined Customer requirements.

      Responsibilities:
      • Building wire harnesses and test boxes for bench test systems.
      • Perform functional bench tests of ADAS products and data acquisition systems.
      • Develop scripts to support automated bench test systems.
      • He/she will report to and receive training, daily guidance and work packages from the ADAS Supervisors and their staff.  Additional support and guidance will be provided by the Contract Company’s Team leader.

      Qualifications:
      • Associates degree in a technical field (preferably automotive).
      • 4+ years experience in an electrical/electronics test lab environment.
      • Proficient in light computer programming, such as: CAPL scripting, using Vector or Intrepid Tools, C/C++ scripting, MatLab, etc.
      • Excellent organizational, verbal and written communications skills.  The candidate must be able to clearly and effectively communicate in English.
      • Computer proficiency with the Microsoft office suite (Word, Excel, and PowerPoint).
      • Able to read/understand electrical schematics, technical specifications, and blueprints..
      • Able to design and de-bug wire harnesses, break-out boxes and related equipment
      • Familiar with automotive hardware, such as switches, relays, power distribution, etc.
      • Proficient with common hand tools, power tools, soldering equipment, and multimeters.
      • Well motivated, self starter, high integrity and team player.
      • Able to work in a team environment, flexible, and able to multi­task to meet project timing (time management skills)
      • Valid driver’s license with clean driving record.
      • Must be able to lift 25 pounds.
      • Logical problem solver with good attention to detail.


      Preferred Qualifications and Desired Competencies:

      • 5+ years’ experience in automotive component testing.
      • Component Data analysis post processing; compiling and analysis of test results.
      • ­ADAS component and feature knowledge.
      • Computerized data logging systems experience.

       
      Job Number: 2110133736
      Job Location: Carpinteria, CA
      Duration: 12 months
      Input Date: 06/24/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Luke Polansky
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PtNOQA0&URLSource=cjhunter

      Lab Technician - Maintenance

      Description:
      Overview
      Maintain, update laboratory equipment to insure continuous operation of laboratory testing.

      Assist / Perform laboratory tests, including set-up, monitoring, measurement, data collection and reporting under guidance of lab Engineers in a test laboratory. 

      Responsibilities
      Laboratory maintenance and updates.

      • Organize the calibration of the Environment lab equipment.
      • Standardize the Test Bench set-up to facilitate usage and improve maintenance.
      • Create a controlled database for all the test benches, including B.O.M, Software rev level.
      • Work with Methods & Tools (M&T) team to develop test environment solutions to enable Design & Process Validation (DV/PV)
      • Contribute to the improvement of the laboratory’s tools such as: Instruction sheets, logs, development and validation tools, process automation.
      • Minimize test cycle times.
      • Input to work instructions for test houses to enable efficient transfer of test equipment
      • Support building and implementation of robust and efficient automated test benches


      Laboratory testing

      • Realize the test (electrical, mechanical, environmental, reliability) in the standard time and in line with the instruction sheet (test specification)
      • In case of difficulty, try to solve it by him/or herself or with support if needed (team leader, validation dept manager, validation engineer, project team member…). Apply the QRQC methodology
      • Input into writing of the test report taking into account the real test conditions, use pictures for more comprehension.
      • Contribute to product problems solving, support 5W2H / PDCA.
      • Police parts logistics and correct archive the parts after test (bags, labels, boxes, pallets).
      • Coordinate planning for the planned testing and allocated resources (chambers, tools, benches,…).
      • Coordinate the specific tools needed for the validation (test specification and follow-up) whenever they are done inside or external of the company.
      • Carry out all work to comply with Quality Management System and Validation Engineering Processes e.g. ASPICE, ISO/IATF16949.
      • Execution of testing using lab equipment (using thermal chambers, IPx) as per test specification.
      • Safety focussed and dedicated to maintaining high quality standards.
      • Report testing status to the val engineer responsible on a regular basis (QRQC, 5mm…)
      • Contribute to test reports, peer-reviews of data and follow up
      • Participate in lessons learned across the various projects
      • Warranty parts traceability, storage and disposition.
      • Coordinate logistics of test racks from & to laboratory and other laboratories worldwide.
      • Track all equipment sent off site ie Tracking number to be kept on file.
      • Request RMA/DAT from Rio Bravo by provide product serial # and Qty
      • Ensure parts have identification label and Shipping data
      • Ensure all warranty information captured (VIN#, MY, Repair date, Build date, Causal part, 3C’s etc) in the tracker before shipping
      • Dispose (scrapped) the parts according to established retention time following internal and customer Procedures

      Qualifications:
      • Min 5 years’ experience and knowledge of test & validation methods in the automotive industry
      • Knowledge of automotive electronics systems
      • Proficient with MS Office / Google Suite.


      Nice to have

      • Basic knowledge in National Instruments LabVIEW and TestStand software - Certified LabVIEW
      • Basic knowledge instrumentation interfacing over PXI, PCI, USB, RS232 & GPIB
      • Basic knowledge in hardware and peripherals
      • Ability to read, analyze and interpret complex documents /schematics.
      • Basic knowledge of automotive electronics systems
      • Validation experience with knowledge of test & validation methods
      • Basic knowledge of accelerated life testing
      • Basic knowledge of IATF 16949
      • Spanish is a plus

       
      Job Number: 2110131553
      Job Location: Troy, MI
      Duration: 24 months
      Input Date: 05/24/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Melissa Cuellar
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pn2jQAC&URLSource=cjhunter

      Lead Engineering Technician

      Description:
      PDS Tech, Inc. is hiring for a  Lead Engineering Technician to work at the Honeywell - Clearwater, FL location.


      Description:
      • Performs hands-on diverse technical tasks related to testing of advanced electronics assemblies for space and defense applications.
      • This position supports testing, troubleshooting and fault isolation of these assemblies by performing well-defined development tests, system integration, and formal acceptance tests, which includes environmental testing.
      • Proactiveness, good communication skills, and discipline are essential for this position.
      • This job entails dynamic, thermal, and functional testing. It includes the ability to set-up, program, and operate special test equipment for the program to perform Acceptance Test Procedures.
      • It also requires lifting and handling fixtures as well as the ability to handle and manipulate delicate hardware and circuit card assemblies.
      • Must be able to keep detailed test logs, follow detailed test procedures without error and provide daily pass-along shift information (both verbal and written documentation).
      • Execute on cleanliness/standardization, Safety, equipment/lab maintenance and Operating System tasks on a daily basis; demonstrate commitment to continuous improvement.
      • Daily interaction with both test technicians and engineers.
      • Communication and Teamwork skills are extremely important.


       
      Qualifications:
      • Associates or technical degree required; equivalent military training/experience acceptable as well
      • Due to Government regulations, U.S. Citizenship is required.
      • Familiar with computers/computer applications (i.e. Word, Excel,)


      • Experience with Guidance and Navigation systems is a plus.
      • Experience with General Purpose Test Equipment (i.e. as oscilloscopes, spectrum analyzers, and logic analyzers).
      • Attention to detail is a must. Ability to follow step-by-step procedures and follow precise instructions
      • Environmental test experience is a plus.
      • Ability, flexibility, and willingness to work different shifts, flex shifts, and alternate work weeks including overtime and weekends on a long-term daily basis as business needs require
      • Ability to read schematics, follow procedures, and apply computer skills and technical knowledge to competently troubleshoot and resolve technical problems.
      • Capable of generating clear and precise technical documentation for the preparation of action registers, engineering orders, and data book entries.


       

       
      Job Number: 2110135100
      Job Location: Clearwater, FL
      Duration: 7 months
      Input Date: 07/19/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Casey Carrion
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxlzQAC&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Manufacturing Engineer III

      Description:
      We are seeking a Manufacturing Engineer III with experience in board level electrical assemblies and testing.

      Bachelors of Science degree in related discipline and 6+ years of experience is a MUST
      Experience with Computer Aided Engineering tools
      Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
      Familiarity with the construction of circuit card assemblies
      Background in the Aerospace and Defense Industry
      Background in Electrical Engineering or equivalent work experience in electronics
      Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)

      A HUGE PLUS: Experience working on space hardware.
      Background in Satellite Electronics Build and Testing or Spacecraft level Assembly, Integration and Test

      The Structures Company is an AA/EOE
       
      Job Location: Denver, CO
      Rate: $45-50/hr
      Per Diem: Yes
      Overtime: Maybe
      Duration: Long-term
      Start Date: ASAP
      Input Date: 04/14/2021
      Last Updated: 08/02/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Chris Sheets
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Website: www.thestructurescompany.com

      Powertrain Controls Engineer

      Description:
      The Powertrain Controls Engineer – Intermediate is responsible for new feature development, and enhancements to existing algorithms. The Powertrain Controls Engineer - Intermediate will work closely with a cross functional team, utilizing various tools (vehicle, HIL, Dyno, Virtual, rapid prototyping) through the V-model development process to ensure quality and robustness of the production algorithms.

      Responsibilities include but are not limited to: 

      •            Interface with systems and calibration to fully understand the requirements
      •            Develop implementation strategies
      •            Assess and document the impacts against regulatory requirement
      •            Markup models to ensure the design meets functional/operational requirements
      •            Validate the design during the production process
      •            Ensure project is on track by developing plans, track progress, and present technical report to management and project chiefs.
      •            Participate in the decision making process on controls strategy design to achieve functional objectives


       
      Requirements:
      • BS degree Electrical Engineering is required from an accredited University
      • 3-5 years of engineering work experience preferred. 
      • Should be knowledgeable in MATLAB/Simulink.
      • Should be knowledgeable in Powertrain systems - specifically, computer based tools and process based development, emissions control systems development, and calibration refinement.
      • Embedded software experience desirable. Electronic module/system experience desirable. Outstanding interpersonal and problem solving skills. Quick study who is passionate about his/her work and willing to go above and beyond.
      • Self-starter who is able to work cross-functionally with other people

      Driving and Travel Requirements:
      Will be required to drive a company car.  A valid driver’s license is required as well as a clean driving record.    
      Will be required to travel domestically and internationally up to 20% 
       
      Job Number: 2010122458
      Job Location: Auburn Hills, MI
      Duration: 12 months
      Input Date: 12/09/2020
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jack Beard
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PHkwQAG&URLSource=cjhunter

      Principal Instrumentation Engineer

      Description:
      In this role you can expect to lead a small team of engineers and technicians through a fast paced, cutting-edge flight test program. You will be responsible for designing, procuring, installing and troubleshooting the onboard data acquisition system on an exciting new aircraft project.

      Ongoing engineering R&D work can be expected upon completion of the flight test project. Following the flight test program, you will work on the research and design of aerospace electrical and electromechanical systems, participate in environmental qualification testing, take part in flight test data acquisition and data reduction, write technical certification documents, and assist in manufacturing, installation, and product life cycle ongoing support.

      This job will be primarily based at a test location in Washington State. Occasional travel to home office in Sandpoint, Idaho can be expected. Travel is required.

      Job Description: Own the development, design, engineering and function of an onboard flight test data acquisition system. Position reports to Program Lead Engineer. Other expected duties include:

      Define requirements for onboard data acquisition and telemetry system
      Direct small team of engineers & techs to meet the needs of the program
      Design and implement hardware and software solutions for ground and flight test
      Work closely with vendors and partners
      Install sensors, wiring, an any required electronic equipment in experimental test vehicle
      Generate and review wiring diagrams, bill of materials, and installation drawings
      Prepare data system for daily test execution
      Calibrate, validate, document, and troubleshoot all installed sensors and equipment
      Participate in ground, bench, and flight tests.
      Data capture, storage, processing and analysis.
      Draft proposals, cost estimates, plans, reports, and other documents as required
      Review technical drawings and service documents to ensure compliance with engineering specifications and regulations
      Qualifications:

      10+ years instrumentation experience in experimental flight test
      Experience leading an instrumentation effort is strongly preferred
      Experience in Data Acquisition and software integration
      Applicant must have experience using MS Excel, and MS Word
      Applicant must demonstrate good technical writing skills
      Must be able to communicate clearly and effectively within a multi-disciplinary team structure.
      Fluency in written and spoken English is required
      Education:

      B.S. in Electrical Engineering or equivalent.

      The Structures Company LLC is an AA/EOE.
       
      Job Number: 498
      Job Location: Arlington, WA
      Rate: Up to $80/Hr., DOE
      Per Diem: Possible
      Duration: 6-12 Months, possibly longer
      Start Date: ASAP
      Input Date: 07/01/2021
      Last Updated: 09/18/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Debbie Aubert
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: Debbieaubert@thestructurescompany.com
      Website: www.thestructurescompany.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Product Review Engineer

      Description:
      Product Review Engineer

      Job ID # 2021-13688

      Contract Opportunity

      Location: Heath, OH

      Industry: Aerospace & Defense

      Minimum Education: Bachelor’s Degree

      Minimum Experience: 2 Years

       

      What You’ll Do:

      Appl basic knowledge of company design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer.
      Analyze, conduct failure analysis, root cause analysis and troubleshoots to understand root cause.
      Provide assistance to identify solutions.
      Provide written dispositions for routine design non-conformances.
      Support activities to identify deviations that could impact design intent and safety and product/process improvements.
      Develop routine customer correspondence for continued safe operation and maintenance of equipment.
      Participate in Material Review Boards and Integrated Product Teams (IPTs).
      Ensure supplier and build partner comply with Boeing standards.
      Represent the engineering community in the build through post production environment.
      Recommend simple non-destructive test procedures, tools, standards.
      Conduct simple static strength analysis to validate interim design repairs meet original design loads criteria.

      What You’ll Need:

      1+ years of hands Electronics troubleshooting experience
      ENG Degree Required
      Preferred:
      RD Experience

      *U.S. Citizenship is required by law, regulation, executive order, or government contract.




      Education & Experience:

      Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 2 + years of relevant work experience; or an equivalent combination of education and experience. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

      What to Expect:

      Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
      Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

       

       

      Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

       

       

      Resources

      For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

      For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

       
       
      Job Number: Job ID # 2021-13688
      Job Location: Heath, OH
      Rate: Open
      Per Diem: No
      Overtime: Possible
      Duration: 5 Months
      Input Date: 07/14/2021
      Firm Name: MOSELEY TECHNICAL SERVICES INC
      Attention: Brentley Sisk
      Address: 7500 S MEMORIAL PKWY STE 215-R
      City, State: HUNTSVILLE, AL 35802
      Phone: 256/880-0446
      Fax Phone: 256/880-0936
      Website: www.moseleytechnical.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Project Managers Avionics - China

      Description:
      Project Managers Avionics - China.


      Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Project Management of Avionics Projects.

      This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


      Required Experience and Qualifications:
       
      • Minimum Full time Undergraduate  in Computing , Communications,  Electronics, Electrical Control.
      •  More than 5 years of experience in civil aircraft airborne system development, and familiar with the system development process.
      •  Use MS tools, such as project, Excel, etc.
      • Have a strong sense of responsibility and communication skills, and have a certain ability to work under pressure.
      • Familiar with SAE ARP 4754a is preferred.
      • PMP certificate is preferred.

      Role and Duties:
      • According to the project management process, be responsible for the development of project scope, resources and schedule. Provide coordination and communication between teams.

      The main responsibilities include:
      • Identify the task scope of the system team and make the master plan.
      • Responsible for monitoring plan operation data, analyzing problems and reporting regularly.
      • Be responsible for identifying plan operation risks and seeking risk mitigation measures.
      • Responsible for plan change and impact analysis.
      • Be responsible for the measurement and monitoring of team human resource demand.
      • Be responsible for auditing the secondary plan within the system team.
      • Track the action items of special work.
      • Promote communication and coordination among teams.
      • Other key projects need to be managed according to the earned value management mode.

      Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
       
      Job Number: BH-386
      Job Location: China, China
      Rate: Remuneration dependant upon experience level
      Per Diem: --
      Overtime: --
      Duration: 1-3 years
      Start Date: 06/28/2021
      Input Date: 06/29/2021
      Last Updated: 07/27/2021
      Firm Name: STRONGFIELD TECHNOLOGIES USA INC
      Attention: Graham Bird
      Address: 5000 BIRCH ST STE 3000
      City, State: NEWPORT BEACH, CA 92660
      Website: www.strongfield.com

      Quality Engineer

      Description:
      A Quality Engineer job is currently available at Belcan in Santa Clara, CA. This is a full time, long term contract position. Great matching candidates will have at least three years of experience in the quality engineering field ideally within the aerospace & electronics industries. You will be performing various quality engineering tasks within both shop and office settings: FAI's, inspection techniques, ISO 9001 & AS9100 quality practices, creation of standard work, supplier assessments and approvals, and root cause/corrective actions (RCCA).

      Quality Engineer job duties:
      * Creation and modification of standard work for internal quality processes
      * Assist team in tracking, documenting, and dispositioning non-conforming hardware using various quality tools.
      * Inspection of parts (if needed) at the customer facility, and also local third part facility.
      * Engineering drawing review and approvals
      * Review of FAI (first article inspection) reports and validity of part conformance
      * Creation of quality notifications within SAP, with ability to disposition quality notifications accurately.
      * Determine and help implement corrective action and mistake proofing
      * Supplier assessments and approval
      * Supplier Development

      Qualifications:
      * Associate degree in Engineering (minimum)
      * Three+ years of quality engineering experience within the aerospace industry
      * Strong familiarity with IPC-A-610; certification desired
      * Knowledge of ISO and AS9100 quality requirements
      * Knowledge of manufacturing practices
      * Knowledge of blueprints and supporting specifications
      * Familiarity with PPAP or PFMEA's
      * Familiarity of using statistical analysis (SPC)
      * Legal authorization to work in the US required: Due to the nature of this work, US CITIZENSHIP

      Desired but not required skills:
      * SAP knowledge
      * Lean Six Sigma experience
      * External (supplier) auditing experience

      If you are interested in this Quality Engineer job in Santa Clara, CA please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

      Belcan is an equal opportunity employer. EOE/M/F/D/V

      Build a challenging and rewarding career with an industry leader!

      www.BELCAN.com
       
      Job Number: 313631
      Job Location: Santa Clara, CA
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 06/22/2021
      Last Updated: 09/19/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: KevinGesner
      City, State: Belcan - Recruiting
      Email: kgesner@belcan.com
      Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=313631&job_number=313631

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Quality Engineer

      Description:
      A Quality Engineer job is currently available at Belcan in Logan, UT. This is a full time, long term contract position. Great matching candidates will have at least three years of experience in the quality engineering field ideally within the aerospace & electronics industries. You will be performing various quality engineering tasks within both shop and office settings: FAI's, inspection techniques, ISO 9001 & AS9100 quality practices, creation of standard work, supplier assessments and approvals, and root cause/corrective actions (RCCA).

      Quality Engineer job duties:
      * Creation and modification of standard work for internal quality processes
      * Assist team in tracking, documenting, and dispositioning non-conforming hardware using various quality tools.
      * Inspection of parts (if needed) at the customer facility, and also local third part facility.
      * Engineering drawing review and approvals
      * Review of FAI (first article inspection) reports and validity of part conformance
      * Creation of quality notifications within SAP, with ability to disposition quality notifications accurately.
      * Determine and help implement corrective action and mistake proofing
      * Supplier assessments and approval
      * Supplier Development

      Qualifications:
      * Associate degree in Engineering (minimum)
      * Three+ years of quality engineering experience within the aerospace industry
      * Strong familiarity with IPC-A-610; certification desired
      * Knowledge of ISO and AS9100 quality requirements
      * Knowledge of manufacturing practices
      * Knowledge of blueprints and supporting specifications
      * Familiarity with PPAP or PFMEA's
      * Familiarity of using statistical analysis (SPC)
      * Legal authorization to work in the US required: Due to the nature of this work, US CITIZENSHIP

      Desired but not required skills:
      * SAP knowledge
      * Lean Six Sigma experience
      * External (supplier) auditing experience

      If you are interested in this Quality Engineer job in Logan, UT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

      Belcan is an equal opportunity employer. EOE/M/F/D/V

      Build a challenging and rewarding career with an industry leader!

      www.BELCAN.com
       
      Job Number: 313633
      Job Location: Logan, UT
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 06/22/2021
      Last Updated: 09/09/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: KevinGesner
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      RF Engineering Manager

      Description:
      An RF Engineering Manager job in Round Rock, TX is currently available through Belcan with one of our Electronics repair clients in the semi-conductor industry. You will be responsible for all engineering activity at company. Products include Radio frequency and DC power delivery systems. To be considered for this role, you will need a BSEE or MSEE degree or another relevant engineering field and at least 8 years of relevant experience. This is a great opportunity with a growing company.

      RF Engineering Manager Job duties:

      * Responsible for all engineering activity at company
      * Leads both tactical and strategic technical responses to customer needs.
      * Lead a group of experienced engineers to support the repair of over 700 different products, evolving processes, and techniques with new technology.
      * Experience in RF and DC equipment for the semi-conductor industry
      * Lead the company into a full PLM system upgrade integrated with the existing ERP system.
      * Work with outside suppliers such as PCB, PCBA assembly, and Machine Shops to realize designs.
      * Mentor growth in both teams and on an individual level.

      Qualifications:

      * BSEE or MSEE degree or another relevant engineering field.
      * Must have three years of experience managing engineering teams delivering successful products/projects-additionally, at least five years of as a practicing engineer with experience in RF or related fields. A total of eight years experience minimum.
      * Have a proven ability to manage both Engineering Technicians and Engineering Professionals' teams to motivate, set priorities, and facilitate.
      * Understand the difference between a product repair organization and a manufacturing/product production company and what contributes to the productivity of both.
      * Demonstrated experience with CAE software such as Genesys, Sonet, Alibre, and Circuit Studio or equivalent tools.
      * Applicant will need to have an applied understanding of electrical, mechanical, and software disciplines to lead this team.
      * Knowledgeable in RF generators and matching networks in the 400KHz to 200 MHz spectrum with power levels of several Kilowatts (not cell phone technology).

      If you are interested in this RF Engineering Manager job in Round Rock, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
       
      Job Number: 312582
      Job Location: Round Rock, TX
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 05/14/2021
      Last Updated: 08/12/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: BarrySparks
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      SR. Electronic Hardware Design Engineer

      Description:
      A SR. Electronic Hardware Design Engineer job in Everett, WA is currently available through Belcan. In the SR. Electronic Hardware Design role, you will responsible for analysis, requirement definition, design, test and verification, integration and troubleshooting of complex electronic hardware systems, including certification. As a Senior Engineer, you will be leading development projects, including schedule and cost performance, and provide engineering mentorship.

      SR. Electronic Hardware Design Engineer job duties:

      * Lead Hardware Design electronic circuits developments for our audio systems, including
      overseeing airborne electronic hardware device full life cycle development, from conception to
      certification
      * Define systems and electrical requirements for new design or updated designs
      * Develop detailed performance specifications
      * Perform preliminary and detailed design activities - including block diagrams, trade off studies
      and design reviews, schematic capture, design analysis, prototype tests, and design reviews
      * Develop equipment to support integration test and documentation for certification
      * Provide troubleshooting support to New Product Introduction manufacturing
      * Lead all project phases from planning to execution and certification
      * Lead design reviews
      * Work with internal and external customers
      * Oversee efforts of and mentor less experienced engineers

      EDUCATION AND EXPERIENCE REQUIRED:

      * B S. in Aerospace/Electrical/Computer Science Engineering
      * 7+ years's experience in hardware electrical design
      * Experience with avionics or audio aircraft subsystems
      * Demonstrated experience or credentials (PMP) in project execution and completion
      * An entrepreneurial spirit (proactive, resourceful, highly motivated with good communication
      skills)
      * Solid understanding of manufacturing and design trade-offs
      * Solve complex problems with minimal supervision and tight schedules
      * Experience with simulation software
      * Experience in showing compliance in accordance with FAA regulations associated with Airborne
      Electronic Hardware (AEH)
      * Strong understanding of Do-254 and ARP 4754A

      If you are interested in this SR. Electronic Hardware Design Engineer role located in Everett, WA please apply via the 'apply now' link provided.
      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



       
      Job Number: 312345
      Job Location: Everett, WA
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 05/08/2021
      Last Updated: 08/20/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: FrancisOsolnick
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Scheduler

      Description:
      Chipton-Ross is seeking a Master Scheduler for an opening in El Segundo, CA.

      Responsibilities:
      Seeking a Master Scheduler to support the Aerospace Electronics business. The Master Scheduler is responsible for the planning, scheduling and monitoring the movement of materials and returns through the production cycle to determine required materials needed to complete a job. The successful candidate will also have responsibility for MRP management, inventory reporting and performing the following duties under minimal supervision, independent decision making in company policy framework.

      Essential Duties and Responsibilities include the following, other duties may be assigned:
      " Maintains Master Schedule to establish sequence and lead time of each operation to meet shipping dates according to sales forecasts or customer orders.
      " Prepares daily, weekly and monthly reporting of on time delivery, inventory analysis, bonded orders, forecasts, finished goods, MRP, EOL and customer portals.
      " Reviews and approves sales quotes for components and end items.
      " Plans and schedules workflow for each product line according to previously established manufacturing sequences and lead times.
      " Oversee the SIM Management process and SIM database support.
      " Management of Product Serialization database.
      " Confers with department supervisors to determine status of assigned projects.
      " Revise production schedules when required due to design changes, labor or material shortages, backlogs, collaborating with management, sales, production or engineering.
      " Expedites operations that delay schedules and alters schedules to meet unforeseen conditions.
      " Maintains timely control of orders, amendments, shipping notices, and other documents.
      " Works closely with Program Management in preparing timeline of product.
      " Daily availability to include evenings and weekends when necessary to reach goals and deadlines.

      Qualifications:
      " Bachelor's degree (B.S.) from four-year college or university in a related field and minimum of ten years of directly related experience and/or training OR equivalent combination of education and experience.
      " Minimum of ten years of manufacturing scheduling experience/knowledge required. Aerospace industry experience a plus.
      " Must have a strong understanding of MRP/ERP system. XA experience a plus.
      " To perform this job successfully, the ideal candidate should have a general knowledge of the Microsoft Office Suite with advanced experience using Excel to include pivot table, macros, and databases required.

      Work Schedule
      1st Shift, 5/40

       
      Job Number: 191942
      Job Location: El Segundo, CA
      Rate: $40 to $43.00 DOE
      Duration: 6+ months
      Input Date: 06/15/2021
      Last Updated: 09/19/2021
      Firm Name: CHIPTON ROSS
      Attention: Silmese Graves
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: sgraves@chiptonross.com
      Website: www.chiptonross.com

      Scientist 4

      Description:
      Chipton-Ross is seeking a Scientist 4 for an opening in Berkeley, MO.

      RESPONSIBILITIES:
      Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

      POSITION RESPONSIBILITIES:
      Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      Develops architectures to integrate systems and components into higher level systems and platforms
      Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      Defines and conducts tests to validate performance of designs to requirements
      Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      Writes appropriate sections of proposals to support development of new business
      Provides general mentorship

      BASIC QUALIFICATIONS:
      Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)

      PREFERRED QUALIFICATIONS:
      Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      Experience working within an engineering organization
      Experience with lightning testing and analysis

      EDUCATION:
      Accredited Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree. Required
      Accredited B.S Degree or higher in Electrical/Aerospace Engineering or Physics.

      TRAVEL: YES
      Willing to Travel Domestically and internationally as needed

      FULL TIME/FIRST SHIFT
      WORK HOURS: 7:00 AM - 4:00 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      ADDITIONAL INFORMATION:
      This position will be in-person to start and potentially transition to a hybrid position. Candidate will need to be local or willing to relocate.
       
      Job Number: 192032
      Job Location: Berkeley, MO
      Rate: $DOE
      Duration: 12 Months
      Input Date: 06/16/2021
      Last Updated: 09/19/2021
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Scientist 5

      Description:
      Chipton-Ross is seeking a Scientist 4 for an opening in Berkeley, MO.

      RESPONSIBILITIES:
      Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.

      POSITION RESPONSIBILITIES:
      Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      Develops architectures to integrate systems and components into higher level systems and platforms
      Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      Defines and conducts tests to validate performance of designs to requirements
      Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      Writes appropriate sections of proposals to support development of new business
      Provides general mentorship

      BASIC QUALIFICATIONS:
      Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)

      PREFERRED QUALIFICATIONS:
      Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      Experience working within an engineering organization
      Experience with lightning testing and analysis
      Previous experience with RF systems and antenna simulation, integration, and testing
      Experience with complex electromagnetic and RF modeling and simulation tools such as Ansys EMIT or Altair FEKO

      EDUCATION:
      Accredited Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree. Required
      Accredited B.S Degree or higher in Electrical/Aerospace Engineering or Physics

      TRAVEL: YES
      Willing to Travel Domestically and internationally as needed

      FULL TIME/FIRST SHIFT
      WORK HOURS: 7:00 AM - 4:00 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      ADDITIONAL INFORMATION:
      This position will be in-person to start and potentially transition to a hybrid position. Candidate will need to be local or willing to relocate.
       
      Job Number: 192034
      Job Location: Berkeley, MO
      Rate: $DOE
      Duration: 12 Months
      Input Date: 06/16/2021
      Last Updated: 09/19/2021
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Senior Digital Hardware Engineer

      Description:
      A Senior Digital Hardware Engineer role located in Chandler, AZ is currently available through Belcan. The Senior Digital Hardware Engineer product design and manufacturing technologies and families include but are not limited to:

      Up/Down Converters Hybrid Microelectronics
      Switch Filter/Amplifier Assemblies Surface Mount Technologies
      Sources & Synthesizers Integrated Multichip Modules & Assemblies
      Transceivers Monolithic/Hybrid/Discrete Components
      Receiver Exciters Analog/Digital Control Electronics

      The Engineer's role involves full life-cycle product development from system concept and requirements through design, production, and verification, working in integrated product teams spanning RF Design Engineering, Manufacturing, and Program Management.

      Senior Digital Hardware Engineer duties:

      * Hardware and firmware development and verification for PIC/microcontrollers and FPGAs
      * Design, develop and test digital subsystems using CPLDs, FPGAs and or discrete logic
      * Schematic capture and board layout using PADS
      * Design complex multi-layer mixed signal digital control boards
      * Use of basic test equipment for analysis and debugging of analog and digital circuits including
      oscilloscopes, logic analyzers, power supplies, and function-generators (familiarity with signal
      synthesizers, spectrum analyzers and other RF equipment desired)
      * Data bus I2C, SPI, RS422, RS232, UART
      * Conversion of customer requirements to required hardware and firmware design
      * Hands on resolution of technical problems during test and integration
      * Generate and review technical product documentation, ICD's and presentation documentation for
      customer design reviews
      * Work effectively with all functional groups to achieve product performance and cost targets.
      * Build quality and manufacturability into the design. Define/understand/comply with company and
      regulatory guidelines to assure a safe operating environment
      * Understand, decompose, and define product and process requirements to support product
      development, sustaining and R&D
      * Generate and review product development documentation including proposals, technical reports,
      procedures, correspondence, etc. necessary to satisfy customer and program requirements.
      * Self-directed and motivated while working and communicating effectively within a team
      environment that consists of RF design engineering, operations, quality, and business disciplines
      * Design test equipment hardware and software, select and procure equipment necessary to
      obtain desired results and accuracy, integrate and/or build automated test systems of low or
      medium complexity
      * Design, code and debug computer/data acquisition systems necessary for
      automated testing.

      EDUCATION AND EXPERIENCE REQUIRED:

      * Education/Certification: BA or BS Degree in an engineering discipline. Masters or PhD preferred.
      * Experience: min of 5-10 years of relevant work experience
      * Experience programming using C in an embedded environment a plus
      * Experience in PADS a plus
      * Experience with Xilinx Spartan 7, Xilinx Zynq-7000, and LabVIEW a plus
      * Experience with Automated test system design, and programming of data acquisition systems a
      plus
      * LabVIEW, TestStand, or similar system-design platforms. SPICE, CADs, Schematic Design and
      Layout
      * Expertise in digital component design and analysis, modeling and simulation, layout and circuit
      level design and test
      * Product development experience with meeting customer schedules is needed

      If you are interested in this Senior Digital Hardware Engineer role located in Chandler, AZ please apply via the 'apply now' link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



       
      Job Number: 311838
      Job Location: Chandler, AZ
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 04/22/2021
      Last Updated: 08/11/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: FrancisOsolnick
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Senior Electrical Engineer

      Description:
      Job description




      Senior Electrical Engineer, Spacecraft Command & Data Handling



      This leadership position is for a highly-experienced electrical engineer who can lead the Command & Data Handling (CDH) subsystem team to define requirements, develop the architecture, implement the design, and verify the subsystem for a spacecraft.



      What You’ll Do



      • CDH technical lead - This position is 70% technical and 30% management.
      • Work daily with the larger CDH team on technical definition, implementation, and verification.
      • Establish strong working relationships with system engineering team, integration and test team, and peers for the other spacecraft subsystems.
      • Prepare and manage subsystem architecture and interfaces.  A strong hardware backgrounds is required.
      • Generate verification and validation plans, and work with Integration and Test team to ensure the subsystem meets requirements.
      • Present architecture, implementation, and verification to customer.
      • Collaborate with the spacecraft system engineers on technology insertion into new bus architectures.
      • Extensive technical writing (Proposal development, Contractual elements, procedural definitions, specifications, interfaces, analysis support and description documents).
      • Prepare and give presentations to peers, management and customers.
      • Maintain a regular and predictable work schedule.
      • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
      • Perform other duties as necessary.


      What You’ll Need



      • BS or higher in Engineering or a related technical field is required plus 8 or more years of related experience. 
      • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
      • Current Top Secret/SCI security clearance required.
      • Minimum of 6 years of direct experience in electronics or avionics subsystem design or test.
      • A solid understanding of all aspects of requirements definition, decomposition, and flow-down, architectural trade studies, architectural and interface definition, hardware specifications, interface control, analyses, and verification.
      • Knowledge of electronics designed for EMI/EMC/ESD compliance.
      • Proven expertise in subcontract management.
      • Extensive experience with defining, developing and delivering space qualified hardware.
      • Intellectual curiosity combined with a strong desire to learn.
      • Strong oral, written, and presentation skills.
      • Effective in multidisciplinary large team work environment with broad responsibilities and minimal oversight.


      Working Conditions



      • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
      • May occasionally work in production work centers where use of protective equipment and gear is required.
      • May access other facilities in various weather conditions.
      • Travel and local commute between Ball campuses and other possible non-Ball locations may be required.


      US CITIZENSHIP REQUIRED




      Job description




      Senior Electrical Engineer, Spacecraft Command & Data Handling



      This leadership position is for a highly-experienced electrical engineer who can lead the Command & Data Handling (CDH) subsystem team to define requirements, develop the architecture, implement the design, and verify the subsystem for a spacecraft.



      What You’ll Do



      • CDH technical lead - This position is 70% technical and 30% management.
      • Work daily with the larger CDH team on technical definition, implementation, and verification.
      • Establish strong working relationships with system engineering team, integration and test team, and peers for the other spacecraft subsystems.
      • Prepare and manage subsystem architecture and interfaces.  A strong hardware backgrounds is required.
      • Generate verification and validation plans, and work with Integration and Test team to ensure the subsystem meets requirements.
      • Present architecture, implementation, and verification to customer.
      • Collaborate with the spacecraft system engineers on technology insertion into new bus architectures.
      • Extensive technical writing (Proposal development, Contractual elements, procedural definitions, specifications, interfaces, analysis support and description documents).
      • Prepare and give presentations to peers, management and customers.
      • Maintain a regular and predictable work schedule.
      • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
      • Perform other duties as necessary.


      What You’ll Need



      • BS or higher in Engineering or a related technical field is required plus 8 or more years of related experience. 
      • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
      • Current Top Secret/SCI security clearance required.
      • Minimum of 6 years of direct experience in electronics or avionics subsystem design or test.
      • A solid understanding of all aspects of requirements definition, decomposition, and flow-down, architectural trade studies, architectural and interface definition, hardware specifications, interface control, analyses, and verification.
      • Knowledge of electronics designed for EMI/EMC/ESD compliance.
      • Proven expertise in subcontract management.
      • Extensive experience with defining, developing and delivering space qualified hardware.
      • Intellectual curiosity combined with a strong desire to learn.
      • Strong oral, written, and presentation skills.
      • Effective in multidisciplinary large team work environment with broad responsibilities and minimal oversight.


      Working Conditions



      • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
      • May occasionally work in production work centers where use of protective equipment and gear is required.
      • May access other facilities in various weather conditions.
      • Travel and local commute between Ball campuses and other possible non-Ball locations may be required.


      US CITIZENSHIP REQUIRED




       
      Job Number: 2010115066
      Job Location: Boulder, CO
      Duration: 100 months
      Input Date: 07/15/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Patrick Mahoney
      Address: 2154 N CENTER ST STE 405D
      City, State: NORTH CHARLESTON, SC 29406
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OtGhQAK&URLSource=cjhunter

      Senior Product Design Engineer

      Description:
      PDS Tech, Inc. is seeking a Senior Product Design Engineer, Glendale, AZ.

      Summary:
      • Specific activities include review of data packages for compliance to materials and properties specifications, generation of contract deliverables such as Materials Identification and Usage Lists (MIUL’s), Materials and Process Control Plans, Corrosion Control Plans, Contamination Control Plans, PDR/CDR presentations, etc. Other activities include review and approval of engineering drawing changes and providing materials & process expertise for solving Production issues.
      • The position will operate within a broader MatEng team working in partnership with experienced MPE engineers located at the Glendale and Clearwater facilities.
      • The successful candidate should have a broad-based knowledge of materials and processes for Space and/or high-reliability hardware and will have the responsibility to ensure designs for assigned programs meet customer requirements.
      • The individual will interact with both internal and external technical experts and function as the primary technical interface for materials and process-related issues for specific programs.
      • The candidate will be supporting materials engineering tasks related to the design, manufacture and test of both electronic systems (guidance and navigation, displays, communication) and mechanical systems (reaction wheel assemblies, controlled moment gyros, pointing systems) for Defense, Space and Commercial Aerospace products.
      • The successful candidate will also support technical team discussions, develop analytical test plans, review test reports for accuracy, generate/write technical reports and participate in / support failure analysis, develop and execute self-directed technical projects, and execute technical tasks with team members until completion.

      Basic Qualifications:
      • Bachelor’s Degree in Materials Science, Materials Engineering, Chemical Engineering, or Chemistry - other related engineering disciplines may be considered.
      • 3+ years experience working directly in Materials and Process Engineering design and applications roles supporting high-reliability hardware.


      Additional Qualifications:

      • Direct experience in aerospace design and manufacturing environment is preferred.
      • Direct experience with military/aerospace specifications is preferred.
      • Direct experience with solder metallurgy, printed board assembly, cable and wire harness assembly, chemical processes (paint/plating), composites is preferred.
      • Hands-on experience with polymers testing
      • Strong focus on problem-solving
      • Ability to work as both a team member and a task leader
      • Ability to quickly assimilate new concepts and information
      • Ability to multi-task work assignments
      • Ability to work in a dynamic and changing environment
      • Ability to self-correct problems and work independently with minimal work direction
      • Excellent communication skills - verbal and written
      • Strong computer skills, especially Microsoft Excel, Word, Project, PowerPoint

       
      Job Number: 2110134293
      Job Location: Glendale, AZ
      Duration: 9 months
      Input Date: 06/24/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Ramon Quintana
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PusZQAS&URLSource=cjhunter

      Senior Software Engineer, Drive Systems

      Description:
      Job Description:
      • Performs reviews of complex customers' standards specification and other documentation to determine software engineering requirements
      • Develop software requirements and design architecture, control concept and complex flow chart.
      • Completes estimates for complex modules under development and estimate amount of work.
      • Present design concept, quality confirmation check sheet and design progress at Design Review Meetings.
      • Create complex code of drive system and chassis control software
      • Performs the prototype software testing in the lab and travel to machine worksites when it’s needed.
      • Performs presentation of complex technical findings and developments

       
      Qualification Required - B.E. electrical/Electronics/computer and equivalent

      Primary Skills:
      • Proficiency in engineering principles including AC motor/generator, Inverter/converter, energy storage, etc.
      • Proficient in C programing language is required
      • Understanding of Linux and Linux application development.
      • Experience with communication protocols including J1939 and TCP/IP.
      • An understanding of Micro-controllers and Embedded development.
      • Experience in leading development projects and ability to take ownership of projects and drive them to completion with minimal supervision.
      • Experience bench testing and debugging embedded systems.
      • Ability to lead Associate Design Engineers, Design Engineers and Contract employees as required.
      • Proficiency in software applications including Microsoft Excel, Word and Power Point, as a minimum.
      • Ability and willingness to travel, including international travel up to 20% of working time.

      Secondary Skills:
      • Experience in LabView programing language is desired.
      • Experience developing CAN/J1939 datalink communication software.
      • Experience with model-based software development including Matlab/Simulink and embedded software architecture experience.
      • Experience with mining trucks or mining equipment.

       
       
      Job Number: 2110133495
      Job Location: Peoria, IL
      Duration: 6 months
      Input Date: 06/22/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Madeline Turriff
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PsnGQAS&URLSource=cjhunter

      Senior Solderer

      Description:
      A Senior Solderer job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred Due to the nature of the work performed in this facility, US citizenship is required.

      Senior Solderer Job duties:

      * Perform fabrication or inspection functions in a research, production or pre-production environment by building or integrating hardware for prototypes, assemblies and large complex systems, soldering ribbons/strip line skills for RF performance
      * Previous J-STD-001 space addendum or NASA 8739 certification is preferred

      Qualifications:

      * A High School diploma or equivalent plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred
      * Ability to solder complex assemblies, small jumper wires.
      * Ability to read a drawing, and wire list
      * Ability to perform more advanced fabrication and marking
      * Distinct communication and computer skills
      * Solid knowledge of Statistics and SPC applications

      If you are interested in this Senior Solderer position in Scottsdale, AZ please apply via the 'apply now' link provided.
      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 313660
      Job Location: Scottsdale, AZ
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 07/02/2021
      Last Updated: 09/19/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      City, State: West Region
      Email: sswatkins@belcan.com
      Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=313660&job_number=313660

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Senior System Designer of Aircraft Communications and Navigation Systems - China

      Description:
      Senior System Designer of Aircraft Communications and Navigation Systems - China.


      Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Communications and Navigation Systems design .

      This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


      Required Experience and Qualifications:
      • Masters degree with Major in Computing , Communications,  Electronics, Electrical Control.
      • Aviation radio communication, radio navigation or related professional background knowledge.
      • Have application experience in communication and navigation.
      • Understand the development process of avionics system / subsystem of civil aircraft.
      • Have strong research ability and be able to identify the development trend of technology.
      • Have team management experience, strong sense of responsibility, good communication skills and team spirit, positive working attitude, optimistic, dare to challenge.
      Role and Duties:
      • Lead the development direction identification and construction planning of communication and navigation specialty.
      • Capture and confirm the requirements of communication and navigation system.
      • Responsible for the architecture design and trade-off evaluation of communication and navigation system;
      • Responsible for the definition of communication and navigation system interface.
      • Responsible for the design and evaluation of man-machine effectiveness of communication and navigation system.
      • Responsible for technical docking and integration support of docking communication and navigation system suppliers.

      Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 

       
      Job Number: BH-385
      Job Location: China, China
      Rate: Remuneration dependant upon experience
      Per Diem: --
      Overtime: --
      Duration: 1-3 years
      Start Date: 06/28/2021
      Input Date: 06/29/2021
      Last Updated: 07/27/2021
      Firm Name: STRONGFIELD TECHNOLOGIES USA INC
      Attention: Graham Bird
      Address: 5000 BIRCH ST STE 3000
      City, State: NEWPORT BEACH, CA 92660
      Website: www.strongfield.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Senior Technician-Equipment Maintenance

      Description:
      A Senior Technician-Equipment Maintenance role located in Gresham, Oregon is currently available through Belcan. The Senior Technician-Equipment Maintenance role will support maintenance and repair of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.

      Senior Technician-Equipment Maintenance Requirements:

      * Repair and Maintain LAM, Tel and AMAT Etch systems.
      * Repair and Maintain Novellus & Mattson Strip systems.
      * Trouble-shoot electronic, electrical and mechanical problems.
      * Read and interpret mechanical prints and electrical/electronic schematics.
      * Work with systems containing radiation, electrical, mechanical, liquid and gas hazards.
      * Practice effective and productive written and verbal communication.
      * Document work in maintenance logs effectively.
      * Follow procedures and instructions.
      * Able to contribute as a reliable and effective team member with minimal supervision.

      EDUCATION AND EXPERIENCE REQUIRED:

      * AA degree in a technical field,Or equivalent semiconductor industry experience, military training
      or technical degree.
      * 5-7 years of experience in Etch equipment maintenance.
      * Solid organizational, documentation and writing skills.
      * Creative problem-solving and decision-making skills.
      * Self-directed, self-motivated.
      * Proficient with MS Office products.

      If you are interested in this Senior Technician-Equipment (Etching Machine) role located in Gresham, Oregon please apply via the 'apply now' link provided.
      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 314351
      Job Location: Gresham, OR
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 07/20/2021
      Last Updated: 09/09/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: FrancisOsolnick
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Software Engineer - Secret

      Description:
      PDS Tech, Inc. is seeking a Software Engineer, in Fort Worth, TX

      Summary:
       You will be part of the highly innovative Simulation & System Test (SST) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within SST resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software

      Description
      • Experience in one or more areas related to simulation software, e.g. real-time executives, modeling and simulation, visual systems, data management, analysis systems, etc.
      • Experience with C++ programming language
      • Experience with Linux operating systems
      • Experience with Object-Oriented Analysis (OOA) / Object-Oriented Design (OOD) techniques
      • Bachelor’s degree in an Engineering/Technical Field
      • Experience with software in a highly integration-intensive environment
      • Experience with Aircraft Avionics Sensors – Electronic Warfare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperture System (DAS), Electro-Optical Targeting System (EOTS)
      • Experience with Agile software development methodologies and tools, such as VersionOne and JIRA
      • Experience with software automation and DevSecOps tools, such as Ansible and Jenkins

      Skill/Experience/Education
      Mandatory

      • C++ and LINUX experience required (and shown in previous work history, not just summary)
      • Object-Oriented Design (OOD) experience required
      • Qualified candidates will have a strong software background to work with simulation tools
      • Simulation /training software experience a plus
      • ACTIVE secret clearance with a background investigation within the last 6 years IS REQUIRED
      • Must be onsite in Fort Worth, TX 100% of the time

       
      Job Number: 2110132870
      Job Location: Fort Worth, TX
      Duration: 12 months
      Input Date: 07/14/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Nicole Emfinger
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqoUQAS&URLSource=cjhunter

      Software Engineer - Secret

      Description:
      PDS Tech, Inc. is seeking a Software Engineer, in Fort Worth, TX

      Summary:
       You will be part of the highly innovative Simulation & System Test (SST) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within SST resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software

      Description
      Experience in one or more areas related to simulation software, e.g. real-time executives, modeling and simulation, visual systems, data management, analysis systems, etc.
      • Experience with C++ programming language
      • Experience with Linux operating systems
      • Experience with Object-Oriented Analysis (OOA) / Object-Oriented Design (OOD) techniques
      • Bachelor’s degree in an Engineering/Technical Field
      • Experience with software in a highly integration-intensive environment
      • Experience with Aircraft Avionics Sensors – Electronic Warfare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperture System (DAS), Electro-Optical Targeting System (EOTS)
      • Experience with Agile software development methodologies and tools, such as VersionOne and JIRA
      • Experience with software automation and DevSecOps tools, such as Ansible and Jenkins

      Skill/Experience/Education
      Mandatory

      • C++ and LINUX experience required (and shown in previous work history, not just summary)
      • Object-Oriented Design (OOD) experience required
      • Qualified candidates will have a strong software background to work with simulation tools
      • Simulation /training software experience a plus
      • ACTIVE secret clearance with a background investigation within the last 6 years IS REQUIRED
      • Must be onsite in Fort Worth, TX 100% of the time

       
      Job Number: 2110132868
      Job Location: Fort Worth, TX
      Duration: 12 months
      Input Date: 07/15/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Nicole Emfinger
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqoKQAS&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Software Verification Engineer - Eng. Contractor 3

      Description:
      Inconen is looking for a Software Verification Engineer - Eng. Contractor 3 for our client, a well-known Aerospace Company, in Savannah, GA.

      Unique Skills:
      1. Degree in Software Engineering, Aerospace Engineering, Computer Science, or equivalent.
      2. Familiarity with real-time embedded software applications, preferably for airborne electronic systems.
      3. Experience performing software verification activities for airborne electronic systems preferred (Flight Control Systems or Avionics for example).
      4. Proficient in MATLAB/Simulink.
      5. Experience performing Hardware in the Loop testing, including unit testing (test bench) and in a lab integrated with peripheral systems and real-time simulations.
      6. Basic understanding of C/C++ or an equivalent programming language.
      7. Familiarity with DO-178C and DO-331 preferred.
      8. Capable of working with Version Control Systems (SVN, git, or equivalent).
      9. Experience writing software requirements.
      10. Experience authoring requirements-based test procedures.
      11. Working knowledge of the principles of control science and theory.
      12. Ability to read and understand functional block diagrams.

      Education and Experience Requirements:
      1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
      3. Experience credit considered for related advanced degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

      Position Purpose:
      1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

      Principle Duties and Responsibilities:
      Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects.
      2. Provides specialized technical assistance to team members.
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
      4. Determines and develops own approach to solutions within schedule and cost objectives.
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
      6. Acts as liaison with representatives outside of the assigned group/area.

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
      3. Perform other duties as assigned.

      Other Requirements:
      1. Advanced degree in engineering related field preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
       
      Job Number: 12899
      Job Location: Savannah, GA
      Rate: $55.00 - $65.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 09/02/2021
      Last Updated: 09/13/2021
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Sr RF Design Engineer

      Description:
      A Senior RF Engineer role located in Chandler, AZ is currently available through Belcan. Sr RF Engineer will use established procedures and work under limited supervision to perform assigned tasks by working cross-functionally with Engineering, Operations, Suppliers and Customers. Provide engineering services for RF/Microwave/ Millimeter military hardware systems for defense application including responsibility for product design, technical proposals, prototype to production, performance, customer presentations, schedule, and cost requirements. Will have expert knowledge of concepts, practices and procedures of assigned product or program.

      Sr RF Engineer duties:

      * May lead a team of engineers on assigned projects. Some of our products include:
      *Up / Down Converters *Hybrid Microelectronics
      *Switch Filter/Amplifier Assemblies *Surface Mount Technologies (SMT)
      *Sources & Synthesizers Transceivers *Monolithic / Hybrid / Discrete Components
      *Receiver Exciters *Integrated Multichip Modules & Assemblies
      *Analog / Digital Control Electronics
      *End to End Systems cascade analysis, utilizing modeling and circuit simulation software tools or
      system performance using analytical tools.
      * Detailed analysis and design of RF (from VHF through millimeter-wave) and mixed-signal
      communications hardware components (front ends, IF sections, phase-lock loops, AGC loops,
      synthesizers).
      * Linear and EM simulation analyses of planar and 3D circuits.
      * Filter modeling, analysis and design, using microstrip, stripline and lumped element.
      * System integration, test and development of RF/millimeter-wave communications hardware for
      spaceflight.
      * Schematic capture and PWB/PCB layouts for complex multi-layer designs, including RF circuits &
      features, DC support circuitry.
      * Investigate, evaluate new emerging technologies for integration into products.
      * Work with interdisciplinary teams to ensure that the designs meet the customers electrical,
      environmental as well as internal manufacturing requirements and standards.
      * Function as technical interface for customers and attend technical meetings as required.
      * Translate customer specification; generate design documentation required for prototype and/or
      production releases as needed.
      * Document new designs per established guidelines including but not limited to simulations, test
      circuit measurements, tolerance analysis, thermal and stress analysis.
      * Provide appropriate input to the development of test procedures, fixtures and software.
      * Respond to RFQ/RFPs input & quote information relative to Engineering & Production cost.
      * Any other tasks assigned by your supervisor or management.

      EDUCATION AND EXPERIENCE REQUIRED:

      * Education/Certification: BS degree in Electrical Engineering minimum, Master's or PhD in EE
      preferred.
      * 10+ years of experience in microwave/milometer-wave design theory component design;
      Experience with high reliability hardware from conceptual design through flight delivery;
      Experience with microwave modeling tools (I.e. Genesys, ADS, AWR Microwave Office,
      AnsoftHFSS, Ansoft Designer, Ansoft Maxwell, MATLAB and AutoCAD or equivalent software.
      * Knowledge of RF/Microwave theory; Systems architecture, RF architecture, RF/Microwave circuit
      design; Detailed knowledge of RF and mixed-signal design techniques and technologies,
      including receivers, frequency converters, synthesizers, and transmitters, mixers, amplifiers,
      PLLs, low phase noise VCOs, filters, etc., from DC > 40Ghz; Magnetic circuit analysis experience
      desired.
      * Applicants selected could be subject to a Government security investigation and must meet the
      eligibility requirements for access to classified information.
      * Eligibility requirements include U.S. Citizens

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
       
      Job Number: 311839
      Job Location: Chandler, AZ
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 04/22/2021
      Last Updated: 08/11/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Sr. Lead Electrical Engineer

      Description:
      Chipton Ross is seeking a Sr. Lead Electrical Engineer in Batesville, IN.

      Job Summary:
      As part of an R&D project team, the Senior Lead / Principal Electrical Engineer owns the design of a complete module, circuit board, or sub-assembly, from conception to design and verification. This individual will work as a lead and ensure that the project progresses in the defined manner. With his/her expert knowledge, the Senior Lead / Principal Electrical Engineer also provides guidance to other engineers on their technical issues, engages in design reviews and helps to resolve the most complex problems. This role will also help create strategies for R&D and the Electrical Engineering group including new technology investigation, electronics platforming, competitive analysis, patent reviews, and technical analysis of target acquisitions.


      Requirements:
      20+ years of engineering experience, or comparable experience
      10+ years leading electrical designs in cross functional teams consisting of discipline specific engineers, or comparable experience
      Working knowledge of Microsoft Office and applicable engineering software
      Strong organizational and communication skills
      Proficient problem-solving and project management skills
      Strong interpersonal skills with the ability to work collaboratively with others in a team environment

      Preferred Experience:
      Designing multiple circuit boards with embedded processors (ARM is preferred) that were produced in medium to high volume (5,000 to 1,000,000 boards per year)
      Working with schematics, layouts, design analysis
      Digital design and basic software development for testing hardware designs
      Experience in the medical device industry and FDA Regulations
      Documenting designs and analysis per FDA certification process including hardware requirements, hardware detailed design, DFMEA, Risk Analysis, and testing requirements
      Designing communication interfaces between circuit boards
      Interfacing both analog and digital sensors to embedded processors including air pressure, temperature, load cells, current measurement, and others
      Designing DC to DC switching power supplies
      Designing for radiated emissions, electrostatic discharge, cost, reliability, and design for manufacturing
      Developing wireless communications including WiFi or Bluetooth
      Experience with simulation tools including MATLAB, Simulink and Multisim

      Education:
      Bachelor's of Science in Electrical Engineering

      Schedule:
      FT, first shift
       
      Job Number: 192573
      Job Location: Batesville, IN
      Rate: $DOE
      Duration: 12 months
      Input Date: 07/13/2021
      Last Updated: 09/19/2021
      Firm Name: CHIPTON ROSS
      Attention: Tyler Harrell
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: tharrell@chiptonross.com
      Website: www.chiptonross.com

      Sr. Facility Maintenance Technician

      Description:
      Belcan has a job with a service client for a Senior PLC/Maintenance Technician located in Riverside, CA This person will function as one of the Sr.Lead Technician's at the customer site for a long term maintenance contract.
      Key responsibilities;
      * Preventive and predictive maintenance, scheduled maintenance, corrective maintenance, scheduled repairs, emergency repairs, and performs complex maintenance on tools, test equipment, etc.
      * Log all service work performed, downtime during repair, and account for equipment service requests of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs.
      * Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
      * Guides on-site technical and operational support in the design, development, installation and maintenance of equipment and systems of a very complex nature. Guides very complex site surveys to develop base or installation design plans. Guides training customers to maintain and adjust very complex equipment. Develops and submits reports covering all job activity. Guides the maintenance of very complex tools, test equipment, calibration items, etc. May develop the planning and estimating of labor categories, rates, material dollar costs, transportation expenses and per diem rates to complete very complex proposals. Guides the review of very complex task plans, drawings, and installation schematics and provides continual guidance throughout task duration.
      * Mentors junior techs. Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
      * Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements and service training to customers.

      Qualifications;
      * Associate degree required, BS/BA in related discipline preferred. Specialized skill training/certification may be required.
      * Skills including a balance of Electronics, Electrical and Mechanical skills with an emphasis on Controls.
      * Strong electrical mechanical background and ability to troubleshoot problems. Need to be able to perform maintenance functions and make repairs in a professional and workman like manner. Need to learn system operations in quick fashion. Needs to be willing to follow procedures and read prints, schematics. Must have an excellent safety record. Must have AB PLC and RS Logix experience. Must have Rockwell software experience. Must be able to utilize CMMS.
      * Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
      * Five years maintenance experience with some conveyor equipment and material handling experience is preferred.
      * Demonstrates and applies comprehensive knowledge of field of specialization to the successful completion of complex assignments. Demonstrates advanced knowledge of concepts, practices, and procedures of particular area of specialization. Demonstrates significant knowledge of organizations business practices and issues faced and contributes to problem resolution of those issues. Generally, 5 years of successful experience in area

      THERE IS A FIRST SHIFT & 3RD SHIFT POSITION
      Hours that we will work when we are 24/7
      1st 5:30am - 2:00pm
      3rd 9:30pm - 6:00am

      THIS IS A CONTRACT TO HIRE POSITION. AVERAGE PAY IS $30.00/HR. SALARY BASED ON EDUCATION, JOB KNOWLEDGE, AND EXPERIENCE. ROTATIONAL WEEKENDS.

      If you are interested in this Senior Maintenance Technician job in Riverside, CA please apply via the 'apply now' link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.


       
      Job Number: 312596
      Job Location: Riverside, CA
      Rate: --
      Per Diem: --
      Overtime: --
      Duration: JOB-CONTRACT_TYPE
      Start Date: --
      Input Date: 07/02/2021
      Last Updated: 09/19/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      City, State: West Region
      Email: sswatkins@belcan.com
      Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=312596&job_number=312596

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Sr. Network Engineer

      Description:
      Inconen is looking for a Sr. Network Engineer for our client, a well-known Aerospace Company, in Huntsville, AL.

      ** Candidates must be U.S. Citizens without Dual Citizenship **
      ** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **
      ** This is a 3-month temp-to-hire role or possibly straight to direct **
      ** Preferred location is Huntsville. Can also be located in Canoga Park, CA (L.A.) or Jupiter, FL. Please specify location availability on the resume **
      ** Looking for VERY senior candidates **

      Duties:
      50% - Provide technical hardware and software support for Classified Enterprise WAN environment to include configuration, racking, cabling for Cisco Switches, Palo Alto Firewalls, Routers, Cisco Jabber, and Cisco Call Manager and other teleconferencing capabilities. Includes IP Phone configurations.
      20% - Address service request and incident tickets submitted by the user population requesting new access or break/fix activities to support the user community
      20% - Apply System Technical Implementation Guidelines (STIGs) to systems, apply compliance and hardening updates and represent the company during audit activities to help maintain accreditation and authorization to operate
      10% - Support projects and help support Linux and Networking environments.

      Skills:
      -Experience with AF Data and Voice Networks—to include management and maintenance
      -Shall have knowledge of the General Dynamics TACLANE line of Network Encryptors (INE).
      -Knowledge of procedures to load various cryptographic equipment including: TACLANE, FASTLANE, vIPER, STE, KIV-7, and KG-84.
      -Knowledge of COMSEC electronic key management systems and local site key management policies.
      -Microsoft Active Directory knowledge.
      -Provide Tier 2 network support for a complex enterprise WAN and LAN network.
      -Detailed knowledge of audio and video (A/V) concepts (i.e. how to set up and cable a room for VTC, where to put microphones to prevent feedback or audio issues, lighting, video, etc.).
      -Analyzes/maintains/administers LAN/WAN systems, including planning, designing, evaluating, selecting, and upgrading operating systems and protocol suites and configuring communication media with concentrators, bridges, and other devices.
      -Resolves interoperability problems to obtain operations across all platforms, including email, file transfer, multimedia, teleconferencing, etc.
      -Plans network layout design.
      -Requires an in-depth knowledge of LAN/WAN communications, network hardware such as Cisco routers, Ethernet switches, bridges, gateways, firewalls, and encryption devices (i.e., Micro and Gig E Taclanes).
      -The engineer shall also have an in-depth knowledge of routing protocol such as RIP, EIGRP, BGP, and OSPF.
      -Palo Alto Firewall configuration experience
      -Demonstrates a strong understanding and practical experience with technologies such as MPLS, VPLS, VPNs, and traffic engineering.
      -Also, desirable to have thorough knowledge of the principles, methods, and techniques used in managing help desk, network troubleshooting, and support, as well as active directory enterprise, network management software and tool suites (i.e., MS SharePoint, NetIQ, Nagios & MRTG). Knowledge of or certification in one or more specific applications or processes may be required, depending on job assignment. In addition, requires competence in systems analysis and technical writing to support SOPs.
      -Designing architecture to include the software, hardware and communications to support the total requirements
      -Ensuring that the network/transport layers of the common operating environment are compliant.
      -Evaluating analytically and systematically problems of work flows and network usage, organization and planning and develops appropriate corrective action.
      -Expert knowledge of TCP/IP protocols (emphasis on Multicast) and Doman Name Systems (DNS).
      -Expert knowledge of network architectures and associated equipment including, but not limited to zones, screening devices, and typical design.
      -Systems Expert on email delivery, specifically including all aspects of POP3 and SMTP.
      -Familiarity with direct attached and network attached storage devices, protocols and techniques to include iSCSI.
      -Understanding of Virtual Machines (VM) and knowledge of VM configurations.
      -Demonstrated ability to interface with remote users via chat, telephone, instant messaging and email to assist in troubleshooting.
      -Strong knowledge of hardening systems, running SCAP tools and implementing STIGs on systems
      -Ability to address audit requirements
      -Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
      -Strong documentation skills and ability to document and diagram solutions using tools like MS Visio

      Education:
      -Desire a Bachelor’s in Computer Science or a related technology field and at least 6 years of experience in network and server infrastructure or an equivalent combination of education and experience.
       
      Job Number: 15350
      Job Location: Huntsville, AL
      Rate: $60.00 - $67.19/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: Temp-to-Hire
      Start Date: ASAP
      Input Date: 07/15/2021
      Last Updated: 07/27/2021
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Sr. RF Engineer

      Description:
      Inconen is looking for a Sr. RF Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

      **Candidates must be a U.S. Citizen without Dual Citizenship**
      **Relocation package if the candidate is more than 50 miles from our location**

      Duties:
      1. Our client, a well-known Aerospace Company, produces complex single, two, and three stage launch vehicles used to support ballistic missile defense testing.
      2. This opening is for a RF Engineer who will be supporting multiple projects that include requirements definition, trade studies, component selection, design, analysis, and testing related to the technologies listed above.
      3. The successful candidate will be well rounded in electrical and RF engineering, self-motivated, detail oriented and able to work both independently and within a team environment.

      Essential Job Functions:
      25 % - Uses fundamentals in electrical engineering both analog & digital electronics.
      25 % - Applies RF principles and design technology in development of RF microwave assemblies and systems as it applies to telemetry.
      10 % - Use of communication transmitters, receivers, power amplifiers, filters, combiners, antennas and flight instrumentation.
      10 % - Designs & supports MIL-STD-461 testing.
      10 % - Uses link analysis, inter-modular analysis and antenna pattern analysis.
      10 % - Designs, develops, integrates and tests military electronic systems with design for manufacturing & environmental constraints such as (EMI, EMC, vibration, packaging thermal ect.)
      10 % - Documents efforts, writes test procedures, reports to completion of milestones with specific procedures.

      Skills:
      1. Ability to use and apply RF principles and design techniques, with experience in development of RF/microwave assemblies and systems as it applies to telemetry.
      2. Experience with communication transmitters, receivers, power amplifiers, filters, combiners, antennas and flight instrumentation.
      3. Experience with link analysis, inter-modulation analysis, and antenna pattern analysis.
      4. Experience with design, development, integration, and test of military electronic systems with design for manufacturing and environmental constraints (EMI/EMC, vibration, packaging, thermal, etc.).
      5. Experience with MIL-STD-461E
      6. Strong Understanding of electrical engineering fundamentals in both analog and digital electronics.
      7. This is a hands-on position for individuals with demonstrated analytical and troubleshooting skills.
      8. Ability to document efforts, write test procedures and reports and contribute to completion of milestones within specific projects.
      9. Excellent written and verbal communication skills.
      10. Experience with Microsoft Word, Excel, and PowerPoint.
      11. May be required to obtain and maintain a U.S. Security Clearance at the appropriate level.
      12. Must be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement.

      Education:
      1. Bachelor's Degree in Engineering and at least 5 years of related experience or an equivalent combination of education and experience required.
       
      Job Number: 12865
      Job Location: Orlando, FL
      Rate: DOE
      Per Diem: Possible
      Overtime: Possible
      Duration: Direct Hire
      Start Date: ASAP
      Input Date: 08/19/2021
      Last Updated: 09/16/2021
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      System Integration Laboratory (SIL) Technicians

      Description:
      PDS Tech is seeking System Integration Laboratory (SIL) Technicians in Stratford CT.

      SIL Technicians must be capable of working from engineering drawings, electrical and electronic schematics with limited guidance to fabricate, install, diagnose and repair equipment and test installations in support of System Integration Laboratory test facilities.

      Must be able to fabricate wire harnesses, test boxes and associated laboratory test equipment.

       

      Experience preferred:
      • Strong electronic and electrical diagnostic and troubleshooting skills.
      • Previous experience with electronic and electrical fabrication.
      • Previous experience working in a laboratory or manufacturing environment.
      • Mechanical and general fabrication skills.
      • Previous experience working with, fabricating and terminating military wiring harnesses and connectors.

       
      Job Number: 2010113788
      Job Location: Stratford, CT
      Duration: 12 months
      Input Date: 05/12/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Stephanie Spolzino
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnnCQAS&URLSource=cjhunter

      Systems Engineer

      Description:
      Job Title: System Engineer
      Responsibilities
      1. Create specifications for Off highway vehicle systems for complex features and functions for the Agricultural  display application software processing GPS Data, Harvesting Machines Yield Data, Handling core business logic for various agricultural operations, ISOBUS 11783 Tack Controller and Virtual Terminal .
      2. Perform the Root Cause Analysis for the defects logged in system.
      3. Participate in Software Validation for every release
      4. Ability to under the C++ Code and support in software solution development , implementation and Testing
      5. Specification of standard electronics to achieve system function
      6. Resolution of functional changes/issues, change requests 
      7. Describe electronic functional testing on test vehicle for Test and Validation Team
      Qualifications
      •Pursuing Bachelor’s Degree in Agricultural,  Electrical Engineering, computer science or EET or related degree area.

       
      Preferred Qualifications
      • Previous experience as System engineer / Designer for Automotive, Off-highway vehicles 
      • Ability to understand the C++ language code
      • Knowledge of vehicle communication and Diagnostics protocols: CAN/LIN/J1939/XCP/UDS
      • Experience with Farm Equipment, Precision Farming systems or connected vehicle systems.
      • Experience in electronic troubleshooting and diagnostics or a related field. Complex mechanical assembly service or troubleshooting acceptable too. 
      • Experience with development and execution of test plans.
      • Ability to demonstrate good written and verbal communication skills required.
      • Ability to demonstrate good computer skills with Word, Excel, MSOffice suite.
      • Ability to work independently with little supervision.
      • Closed loop control system appreciation and understanding – electro-hydraulic, electrical and electronic systems.
      • Mechanical aptitude and appreciation, to supplement, if SW and/or Electrical background
      • Communications protocol experience and understanding (e.g. Serial,  Cellular, Wifi, GPS, ISOBUS).
      • Agricultural, construction, or similar background which demonstrates familiarity with operation of off-highway equipment.
      • Experience using Vector tools CANalyzer / CANoE devices, or other tools for serial bus system data logging and analysis.
       

       
       
      Job Number: 2110134696
      Job Location: Hinsdale, IL
      Duration: 6 months
      Input Date: 07/13/2021
      Last Updated: 09/17/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Madeline Turriff
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PwXmQAK&URLSource=cjhunter