Job Search Results

644 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:15AM Pacific Time by ContractJobHunter. )

Listings 1 - 644

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Analysis Engineers Needed

Description:
• Must have experience analyzing primary aircraft structures.
• Composites/Metallic experience
• MUST be able to do hand calculations to improve structure
• NO test or software experience needed.
• This is converting old production line aircraft drawings to UG NX/CAD. There will be several other projects backing this up.
• Must be US Citizen



The Structures Company LLC is an AA/EOE.
 
Job Number: 493
Job Location: Vero Beach, FL
Rate: $75-$80/Hr. **DOE**
Per Diem: Yes
Overtime: NO
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 06/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
45721-1- Systems Engineer 3 - Reliability, Maintainability and System Health

Description:
***POSSIBLE REMOTE POSITION***

Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification

• Bachelor's of Science degree or higher from an accredited course of study in an engineering discipline, computer science, mathematics, physics or chemistry.
• 5 or more years' related work experience in an engineering field
• Design for Safety (airplane and system design, failure modes, rates, effects, propagation and detection analysis, architecture & operational provisions, safety & certification analysis, certification support),
• Experience with Fault Tree Analysis (FTA)
• Experience with Fault Tree Analysis software tools such as CAFTA, FaultTree+ or similar software application
• Experience in one or more airplane systems design or analysis (e.g. Flight Controls, Hydraulics, Avionics, Fuels, propulsion, etc.)
• Top 3-5 Soft Skills for culture fit:
a. Communication
b. Collaboration
c. Adaptability
• Minimum bachelor degree in an engineering field with 5 years or more of engineering experience
• Experience with Fault Tree Analysis software tools such as CAFTA, FaultTree+ or similar software application.
• Experience working with companies, such as Cessna and gulfstream would be a plus


The Structures Company LLC is an AA/EOE.
 
Job Number: 478
Job Location: Everett, WA
Rate: $78/Hr.***DOE***
Per Diem: Possible
Duration: 7 Months - Possible Extension
Start Date: ASAP
Input Date: 06/24/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 02/08/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/14/2022
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
An Advanced Engineering Technician job in Scottsdale, AZ is currently available through Belcan. In this role, you will work under the direction of a technical lead and be part of a design team, working in a lab environment conducting tests and aiding in the integration of the design at the board, module, and higher levels of product integration. To be considered for this role, you will have an Associates degree and a minimum of 2 years related work experience.

Advanced Engineering Technician Job Duties:

* Experience working with RF test equipment up to 40 GHz. This includes vector signal network analyzers, communication signal analyzers and a variety of spectrum analyzers as well as high speed oscilloscopes.
* Experience automating test process though software such as Labview.
* Ability to develop test procedures, maintain test equipment integrity and generate test reports
* Conduct tests and aide in the integration of board design, module, and higher levels of product integration
* Experience working with large signal characterization of high power amplifiers including Pout, IIP2, IIP3, and P1dB compression point as well as load pulls of discrete devices and circuits. Thermal management of the test environment and experience working with cold plates as well as environmental chambers.
* Applicant will work under the direction of a technical lead and be part of a design team experienced in modeling and characterizing board level circuit designs, packaging, antennas, and RF front-ends

Qualifications:

* Associate's Degree
* Experience with Software Defined Radios
* Experience with legacy analog AM and FM waveforms and related measurements

If you are interested in this Advanced Engineering Technician job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 310888
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/02/2021
Last Updated: 08/24/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Software Engineer - Network and Switch Software Development and Verification

Description:
ABOUT THE JOB:
Be part of a team that designs, develops and integrates highly complex software functions. You will be instrumental in designing the Switch Software supporting a Next Generation Avionics network. You will generate innovative solutions; trying different and novel ways to deal with problems and opportunities.

REQUIRED SKILLS:
• Bachelor’s degree in Engineering or Computer Science
• 7+ years Aerospace Engineering experience
• Experience with DO-178B/C software development life cycle
• Able to define DO-178C DAL A compliant software verification and validation strategy and methods
• Able to develop verification and validation infrastructure
• Knowledge of software configuration management and chang management practices
• Software Requirements and design decisions for Network Switch
• Hardware Device Driver development
• Software architecture and coding
• Integration
• Certification
• Test
• Application Definition
• Ability to code in multiple languages (C, C++, python)
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• Experience with A664 / AFDX networking
• Experience with TI Hercules microcontroller development environment
• Individuals who are self-motivated and able to work with little supervision, who consistently take the initiative to get things done, do things before being asked by others or forced to by events

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engine Control System Bench Test - Lead and Contributing Engineers

Description:
ABOUT THE JOB:
Seeking lead and contributing engineers for aerospace engine control system bench test development in support of system verification testing for a new aircraft propulsion turbine engine control unit design. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the system verification test development process.

REQUIRED SKILLS:
• Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
• 7+ years aerospace engineering experience
• Aerospace controls product experience
• System test bench verification experience
• Knowledge of ARP4754A and DO-178 certification guidelines
• Experience performing test data post processing and analysis
• Experience authoring system test plans and procedures
• Background in control system engineering and integration
• Has a disciplined requirements-based engineering approach to system verification
• Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
• Ability to manage a variety of complicated tasks, situations, and people

PREFERRED SKILLS:
• For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
• For a lead engineer role, demonstrated history of guiding small engineering teams through the systems verification process
• Propulsion or APU turbine engine control system verification test development
• Experience with Rational ClearCase, ClearQuest, and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-36 months
Start Date: ASAP
Input Date: 07/02/2021
Last Updated: 07/13/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engine LRU System Development - Lead and Contributing Engineers

Description:
ABOUT THE JOB:
Seeking lead and contributing engineers for aerospace engine LRU development for a new aircraft propulsion turbine design including engine health monitoring system and torque sensing functions. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the development process.

REQUIRED SKILLS:
• Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
• 7+ years aerospace engineering experience
• Knowledge of ARP4754A and experience with model-based system development and certification
• Effective coordination and communication with:
o Systems engineering teams
o Multi-disciplinary team members
o Internal and External project management organizations
• Experience in System requirements development
• Experience in Control system engineering and integration
• Has a disciplined requirements-based engineering approach to system design, and demonstrates the following skills:
o Requirements analysis and decomposition
o Requirements validation
o Change management
• Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
• Ability to manage a variety of complicated tasks, situations, and people

PREFERRED SKILLS:
• For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
• For a lead engineer role, demonstrated history of guiding small engineering teams through the development process
Propulsion or APU turbine engine control system development
• Engine Health Monitoring (EHM) system experience
• Torque sensing system experience
• Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
• Experience with electro-mechanical components used in control systems, and interfacing those components to a controller
• Knowledge of DO-178 certification guidelines
• Experience working with component suppliers to refine component requirements/specifications, and to develop and approve qualification plans
• Experience with Rational ClearCase, ClearQuest and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-36 months
Start Date: ASAP
Input Date: 07/02/2021
Last Updated: 07/13/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II

Description:
Chipton-Ross is seeking 80 Aircraft Mechanic II's located in San Antonio, TX.

RESPONSIBILITIES:
Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
Use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
Maintain necessary certifications, licenses and permits as required for assigned work.

REQUIRED EXPERIENCE:
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Experience working as an aircraft mechanic
Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; Mission requirements and / or workload may require both scheduled and unscheduled overtime)

PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):

Currently possess an FAA A&P License or Military Technical School equivalent
Computer skills experience including but not limited to: aircraft related systems and basic Microsoft Suite software (i.e. Word, Excel)
Experience reading and understanding engineering drawings, blueprints, schematics, and specifications

EDUCATION:
Accredited High School Diploma or Equivalent

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30PM
 
Job Number: 190853
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 months
Input Date: 05/04/2021
Last Updated: 06/13/2022
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 3

Description:
Inconen is looking for an Aircraft Performance Software Developer 3 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14929
Job Location: Savannah, GA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 4

Description:
Inconen is looking for an Aircraft Performance Software Developer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14930
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics DO-178 Software Development

Description:
ABOUT THE JOB:
This position is responsible for avionics software development activities in accordance with the DO-178 lifecycle. Activities include development of software requirements, software design, software code, and software verification test cases and procedures.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* 5+ years Aerospace Engineering experience
* Knowledge of DO-178 full lifecycle development process and its application in the development of complex systems software
* Experience developing software to run under a real time operating system (RTOS)
* Experience with requirements capture and management, and associated tools
* Experience translating software requirements to C/C++ language code
* Experience in development of detailed design documents
* Experience translating software requirements to software verification test cases
* Experience developing software verification test procedures
* Familiar with Software Change Request (SCR) processes and tools
* Familiar with software configuration management processes and tools

PREFERRED SKILLS:
* TCAS, Transponder, TAWS/EGPWS product experience
* Experience with Green Hills Integrity RTOS
* Experience with Rational ClearCase, ClearQuest and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo + extensions
Start Date: July
Input Date: 07/01/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System with embedded DO-178 software Engineer

Description:
Position Requirements:
Experience with embedded software development.
Preference will be given for additional work in flight controls and/or avionics, embedded software development, and testing.

• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with software Configuration Management
• Experience with Primary Development Environment:
o MathWorks MATLAB / Simulink
o C/C++ code
o C# test scripts
 
Job Number: TX9851
Job Location: FT Worth, TX
Rate: 55-70hr.
Per Diem: offered
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 04/27/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Job Summary:
Responsible for the research, integration, testing, certification, and follow-on support of avionics and electrical components and software for general aviation aircraft. Work closely with equipment manufacturers, as well as other systems engineers and test pilots within the organization to establish and refine cross-system requirements for a highly integrated avionics system to help ensure a high quality end user experience with a safe, robust, and intuitive system design.

Job Duties and Responsibilities (Essential Functions):
Integration and testing of avionics and electrical systems and equipment, including:
Requirements development and traceability
Research and identification of potential solutions to design objectives
Detail design and installation
Test case development, execution, and troubleshooting on both bench and aircraft
Coordinate design development and system integration with subcontractors
Generate high quality reports and test plans that will be used to meet FAR Part 23 certification requirements
Generate engineering documentation in accordance with company procedures to develop and maintain type design data for multiple aircraft

Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The below requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Required Education and/or Experience:
Bachelor%u2019s degree in Electrical or Aerospace Engineering (or equivalent) required
10-14 years experience with general aviation avionics development/integration
Prior experience with the following is desirable:
Integrated avionics systems (e.g. G1000, G3000, etc.)
Avionics systems, software and hardware development processes (e.g. ARP-4754/DO-178/DO-254).
Requirements traceability (DOORS, JAMA, etc.)
Equipment environmental qualification (e.g. DO-160)
Distinguishing Education and/or Experience:
Previous certification experience with standards such as 14 CFR Part 23.
%u2022 Process development experience (Six Sigma Green belt or others).
Process mapping and deployment experience (VSM).
Use of design tools such as CREO, MATLAB, VBA, or similar programs.
Requirements Management tool experience (PTC Integrity, Doors, Jama, or equivalent).
Change Management and Configuration Management tool experience (JIRA, Windchill, Clearquest, Clearcase, or equivalent).
Pilot or Ground School experience preferred.

Demonstrated Proficiencies/Skills/Abilities:
Must be able to demonstrate the ability to read, write and speak the English language
Ability to communicate technical knowledge in a clear and understandable manner
Ability to work both independently and within a cross-functional team
Ability to efficiently learn new skills and manage multiple tasks
Use of lab equipment, such as oscilloscopes, signal generators, and spectrum analyzers
Proficient with Microsoft Office (Outlook, Excel, PowerPoint, Word, Visio)
Familiarity with Atlassian JIRA, PTC Windchill PDM, and PTC Creo tools preferred
 
Job Location: REMOTE
Rate: $65-$70/HR.
Input Date: 07/19/2021
Firm Name: JOHNSON SERVICE GROUP
Attention: Tracey Hill
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Programmer

Description:
Responsible for programming a coordinate measuring machine (CMM). Also, fixing, maintaining and updating the CMM. Minimum requirement is PC-DMIS (Dimensional Measurement Interface Specification) utilizing BladeRunner software is a PLUS.
 
Job Number: 61543
Job Location: El Cajon, CA
Rate: Open
Duration: 12 months
Input Date: 07/09/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - TS I - TC Programs

Description:
Inconen is looking for a Certification Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Job Responsibilities:
1. Prepares, develops, and reviews complex certification plans describing the project scope, certification deliverables, means of compliance, and test/conformity requirements.
2. Coordinates with ODA Unit Members to resolve issues with certification deliverables and 8100-9 finding.
3. Reviews TIA pre-requisites, drafts TIA, and creates problem reports memo.
4. Independently prepares Summary Compliance Reports for complex projects.
5. Responsible for tracking project task assignments, status, and estimated complete dates as assigned.
6. Recommends improvements to existing processes.

Unique Requirements:
1. Knowledge of phases of TC, post-TC and STC certification projects, and the associated FAA Orders and Policy.
2. Knowledge of Part 25 regulations, how those regulations drive design and system redundancy requirements, and the supporting regulatory guidance material.
3. Understanding of software assurance and complex hardware requirements and applicability to our aircraft systems.
4. Experience determining appropriate means of compliance.
5. Understanding of certification testing process and deliverables.
6. Understanding of airworthiness limitations and associated regulations and operating requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12862
Job Location: Savannah, GA
Rate: $55.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/27/2021
Last Updated: 08/12/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Systems Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services. Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Unique Skills:
• Proficient in System level Wire Diagram/Schematic design for aircraft.
• Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
• Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
• Ability to complete system level ELA (Electrical Load Analysis).
• Ability to develop or decipher technical and test specifications.
• Knowledge of 14 CFR 25 Subpart H - EWIS based design.
• Knowledge of Catia V5.
• Part 25 Certification experience for cabin interiors preferred.
• Familiarity with aircraft STC procedures preferred.
• Makes technical decisions and provides recommendations demonstrating leadership authority.
• Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-559
Job Location: Savannah, GA
Rate: $65-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/15/2021
Last Updated: 11/16/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Systems Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Electrical Systems Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Proficient in System level Wire Diagram/Schematic design for aircraft.
Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
Ability to complete system level ELA (Electrical Load Analysis).
Ability to develop or decipher technical and test specifications.
Knowledge of 14 CFR 25 Subpart H - EWIS based design.
Knowledge of Catia V5.
Part 25 Certification experience for cabin interiors preferred.
Familiarity with aircraft STC procedures preferred.
Makes technical decisions and provides recommendations demonstrating leadership authority.
Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15573
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 03/01/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager - Level 2 / Level 3

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Pay Range: Level 2 = $40.00 - $43.75/HR / Level 3 = $50.00 - $53.85/HR
Schedule: 9/80

** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Hardware Configuration Management role. NOT a Software Configuration role **

Duties:
-Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

-25% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
-25% - Perform validation of manufacturing bills-of-material and their attribute data.
-20% - Perform Contract and Supplier Data Management processing in accordance with program data requirements and statements of work.
-15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
-10% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
-5% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required.
-Proficiency with Microsoft Office products (e.g., Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 15242
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/29/2021
Last Updated: 08/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer-Aero Mechanisms WA-0805 July 21

Description:
Design Engineer - Aerospace Mechanisms - Seattle WA area - 0805

Our client in the Seattle, WA area is a leading designer and manufacturer of specialty aircraft modifications and products, our client has several new programs and looking for great candidates to discuss direct opportunities for Design Engineers with Mechanism Experience using Solidworks or a similar CAD system


Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada, and Europe. We have been in business 20 years in the US and 8 years in Europe.

MECHANICAL DESIGN ENGINEER – MECHANISMS

Solidworks or any 3D modeling software design personnel to develop aerospace mechanisms for latches, doors, etc that include the generation of models, specifications, and drawings.
You will be responsible for designing and identifying component parameters, selecting materials, assemblies, and parts to be used for commercial aircraft
You can demonstrate your background with mechanisms, kinematics, or structures design in the aircraft industry,
Preparation of FAA documents and test plans; knowledge of aerospace industry materials, hardware, and processes;
knowledge of FAA regulations;

Qualifications:

Bachelor's degree from a four-year college or university, or equivalent of education and experience
Minimum of ten years of experience as a Design Engineer preferably within the aerospace industry.
Experience in a manufacturing environment preferred, especially working with composite materials.
Strong communication and interaction skills.
Ability to lead continuous improvement projects and use /evaluate statistical data analysis tools during continuous improvement projects.
Proficient in the use of Microsoft Office Suite including Word, Excel, PowerPoint, and Outlook.

If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
 
Job Location: Seattle, WA
Rate: DOE
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/19/2021
Firm Name: KELTIA DESIGN INC
Attention: Jason Ruppert
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer / Saint Louis, MO

Description:
Design and Analysis Engineer 1

Location: Saint Louis, MO
Duration: 6+ Months

Description:
Assists with the development and documentation of electronic and electrical system requirements. Develops or modifies basic hardware and software designs based on defined requirements. Performs system tests to verify operational and functional requirements. Assists in monitoring suppliers'' performance to ensure compliance with requirements. Supports resolution of product integration issues and production anomalies. Researches basic technologies for potential application to company business needs.

Working on test equipment repairs. Looking @ electrical drawings and fixing obsolesce issues with parts. Estimating repairs needed for broken test equipment. Coordinating with procurement to get repair parts for support equipment.

Top 3-5 technical/software skills needed to perform this role/job:
Read electrical schematics and drawings. Experience with support equipment like DMMs, O Scopes, function generators, experience with communication protocols like 1553, RS422 or 232, ARINC 429

BSEE (required) bachelors in electrical engineering

Education / Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Location: St Louis, MO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Design Engineer to provide production support and design improvements for a complex high-powered multi-channel analog transmitter used in undersea acoustic sensors.
Responsibilities will include working with other engineers (Mechanical, Electrical, Software, Test, Manufacturing, and Quality).

Deliverable Product
* Experienced or desire to gain experience in troubleshooting analog/power hardware with some elements of digital hardware
* Familiarity with troubleshooting down to the component level to identify root cause, and fishbone analysis type troubleshooting techniques
* Expertise in reviewing test data and spotting trends suggesting anomalous performance
* Firm understanding of electronic parts, and fundamentals of electrical engineering theory
* Familiarity with spice modelling applications

People
* Desire to work closely with Program Office, Quality, manufacturing assemblers, test technicians, and field engineering to help drive product deliveries to the US Navy
* Skilled at working within a diverse team
* Capable of leading junior engineers in their day to day assignments
* Capable of communicating with a broad set of disciplines including manufacturing, quality, test, engineering, team leads, program management, and senior management

Test Systems
* Familiarity with test systems design, reviewing electrical and mechanical drawings for test systems and test cables
* Experienced or desire to become experienced in applications utilizing Test Stand and Labview
* Desire to create techniques and methods to drive process improvements, and drive workmanship errors/test defects to zero
* Familiarity with testing and driving product through ambient, vibration, and thermal test environments

Basic Qualifications :
Demonstrated experience in industry with
* Proficiency with electrical engineering design experience
* Proficiency in troubleshooting of electrical circuitry
* Proficiency in SPICE-based circuit simulation tools.
Must have the following experience
* Power supply design
* Analog Circuit Card Assembly design and analysis
* Experience in mixed signal design & A/D conversion, as well as MATLAB experience
Desired skills :
The ideal candidate will have experience with:
* Voltage regulation
* Power conditioning
* Designing electronics for acoustic sensors
* Acoustic systems analysis
* DC/DC conversion
* Sensing and control
 
Job Number: 58672
Job Location: Marion, Mass
Duration: 15 months
Start Date: ASAP
Input Date: 07/13/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - ECU and LRU Design

Description:
ABOUT THE JOB:
Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 5+ years Aerospace circuit design experience
• Control systems and/or supporting component hardware design experience
• Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
• Experience developing hardware requirements from system requirements and managing those requirements
• Engines/Propulsion, APU, or Flight Controls experience
• Schematic capture
• In-depth circuit analysis and simulation
• DOORS proficiency
• Effective communication skills (both verbal and written)
• Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:
• Engine ECU and LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - RF Circuits and Systems

Description:
ABOUT THE JOB:
This position is responsible for electrical design of RF and microwave circuits in TCAS and weather radar systems.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 7+ years RF and microwave circuits design experience
• Experience developing requirements for RF systems
• Ability to optimize and center RF circuits
• Experience with PWB layout of RF circuits
• Experience coordinating with FPGA, systems and software engineers to optimize a design
• Ability to support MOPS (minimum operational performance standards) testing and troubleshooting
• Experience supporting qualification testing and troubleshooting
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• Familiarity with one or more of the following: TCAS, transponder, DME, ground proximity warning system, and weather radar products

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 11/19/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Space Systems

Description:
ABOUT THE JOB:
Be part of a team that designs solutions that support deep space exploration.

REQUIRED SKILLS:
• Bachelor’s degree in Engineering or Computer Science
• 7+ years Aerospace Engineering experience
• Experience designing analog circuits
• Experience with designing motor drive circuits
• Experience designing half-bridges
• Strong background in power supply design
• Familiarity with component selection and design for deep space radiation concerns
• Software architecture and coding
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• Experience with Mentor Suite tools
• Experience with digital signal processors (DSP)

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 08/06/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer

Description:
The contractor will sit on site in the Orlando office and will need to wear a mask and socially distance while at work.

The contractor must have an Interim Secret DOD clearance to start for 6 of the 8 positions. The other 2 positions require a full Secret DOD clearance.

Please list last clearance investigation date on resume.

Please state latest C++ IEEE version, in which candidate has experience, on resume.

MFC is looking for an experienced Software Engineer to develop embedded real-time software. Selected candidate will integrate algorithms into C++ applications. Candidate is expected to be proficient in C/C++ IEEE 11 or later. The candidate needs experience in hardware to software integration, Intel multi-core processors, multi-threaded applications, Linux, middleware, simulation, VxWorks, Graphical interfaces, and full software life-cycle development.

Mandatory:

Bachelor's degree in Computer Engineering, Computer Science, Software Engineering, or related discipline Must be a US Citizen with the ability to acquire a Secret clearance from the DOD Agile development C and C++ IEEE version 11 or later Embedded real-time software development Full software life-cycle development Hardware/Software integration Intel Multi-core processors Linux Multi-threaded C++ programming Software configuration management / source code versioning

Desired:

Active Protection System Data Analysis tools Data Distribution Services (DDS) Design pattern usage Documentation - technical from design to test Embedded to simulation software integration Git – source code versioning / configuration management GitLab - source code versioning with DevOps capabilities Graphical interface (GUI) development Jira - issue tracking and agile project management Linux - Red Hat MatLab Operational Flight Program (OFP) Python - Scripting Qt - GUI development Reusable modular design Scripting Software Architecture Software simulation development Visual Studio - GUI development

Skill Matrix:

Bachelor's degree in Computer Engineering, Computer Science, Software Engineering, or related discipline
Must have an Interim Secret clearance from the DOD 9-10 years - YES on the resume
C and C++ IEEE version 11 or later - 9-10 years - YES on the resume
Embedded real-time software development 9-10 years - YES on the resume
Full software life-cycle development 9-10 years - YES on the resume
Hardware to software integration 9-10 years - YES on the resume
Intel Multi-core processors 9-10 years - YES on the resume
Linux 9-10 years - YES on the resume
Multi-threaded C++ programming 9-10 years - YES on the resume
Agile development techniques and practices 4-5 years - YES on the resume
 
Job Number: JPC - 98061
Job Location: Olando, FL
Rate: $90 per hour on W2
Per Diem: split
Overtime: Allowed
Duration: 12 months
Start Date: ASAP
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer Level 3

Description:
Candidate will need to be able to sit onsite in Grand Prairie and will be required to wear a mask/ face covering while working***
Must have Active Secret from the Department of Defense (DOD) and clearance status and last investigation date must be listed on top of resume.
Real-time embedded software engineers are needed to develop new code in C++ and modify code in Ada utilizing a cross compiler for Ada to C++. The candidate must have experience in C++, Ada, cross compiler usage, as well as experience developing for both Linux and Windows. Experience with full life-cycle development is required.

Skill/Experience/Education
Mandatory
DOD Secret Clearance. Bachelor's degree in Computer Science, Computer Engineering, or Electrical Engineering.
Real-time embedded software development. Algorithm translation to embedded real-time code.
Full lifecycle development.
Language – Ada. Language – C++. Operating System (OS) - Linux Operating System (OS) - Windows.

Desired
Desired Ada/C++ binding/wrapping Agile techniques Code and Document peer review - Code Collaborator Data Distribution Services (DDS) by RTI Documentation - technical design Documentation - test procedures Issue/Change tracking - Jira Language - Fortran 95 Operating System (OS) - Linux: CentOS Operating System (OS) - Linux: Redhat Publish / Subscribe communication protocol Source code configuration management - Git Test software development Testing based on performance requirements VxWorks

Skill Matrix
Skill Name Description
Bachelor's degree in Computer Engineering, Software Engineering or Computer Science.
DOD Secret Clearance with investigation date
Real-time embedded software
Ada
C++
Linux OS
Windows OS
Full life-cycle development
Ada/C++ binding/wrapping
Agile techniques
 
Job Number: JPC - 93797
Job Location: Grand Prairie, TX
Rate: $108 per hour on W2
Per Diem: split
Overtime: allowed
Duration: 12 months
Start Date: ASAP
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer Level 3

Description:
Indotronix is looking for a Software Engineer to develop and maintain real-time embedded software applications in an Agile development environment. Typical applications are software products related to sensor control, image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C++ hosted on either a PC or custom hardware with and embedded processor and utilizing real-time operating systems like VxWorks, Embedded Linux, or Integrity. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience throughout the entire software development lifecycle including architecture, design, code implementation, and integration and test. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. Bonus skills would be familiarity with continuous test environment management, Cyber Security, Department of Defense products, board support package and device driver development.

Skill/Experience/Education
Mandatory
Agile development techniques and practices C++ 11 or higher Embedded real-time software development Full software life-cycle development Hardware & Software Integration Linux OS Simulation software Software configuration management Windows

Desired
Ada
Autopilot
C++ cross-compiler to microprocessor
Creation of flight performance models
Debug in an embedded environment using telemetry, data collection and data reduction tools to acquire and analyze data
Embedded to Simulation code merge
Gimbal line of sight control
GPS-aided inertial navigation
Guidance
Integrated Flight Simulation (IFS)
IR seeker image processing
Launch sequence and control
Mission data transfer and 1553 interface algorithms
Operational Flight Program (OFP)
Perl
Python
Universal Armament Interface (UAI)
 
Job Number: JPC - 98062
Job Location: Orlando, FL
Rate: $90 per hour on W2
Per Diem: split
Overtime: Allowed
Duration: 12 months
Start Date: ASAP
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
An Embedded Software Engineer job in Phoenix, AZ is currently available through Belcan. The Embedded Software Engineer will work with a small, high-performance team to develop new products and technology with a strong focus on design requirements, performance, improvement, reliability, manufacturing, and project completion. To be considered for this position you will need a Bachelor's Degree in Computer Engineering, Computer Science or equivalent plus a minimum of 5 years of experience in development of software/firmware for electronic products.

Job Duties:
* Proven experience developing and implementing software for embedded devices and systems
* Proficiency with software configuration and management tools, defect tracking tools and peer review
* Knowledge of best practices for full software development life cycle, including coding standards, code reviews, source control management, build processes, testing and operation
* Proven ability to work with complex algorithms and data structures, write code from the ground up, and test and improve existing code
* Application architecture and design patterns
* Experience in development of distributed/scalable systems
* Graphical User Interfaces

Qualifications:

* BS Computer Engineering, Computer Science or equivalent.
* Minimum 5 years' experience in development of software/firmware for electronic products.
* Ability to read schematics and data sheets for components.
* Software and firmware for microcontrollers, wireless communications devices, battery management, machine controls, etc.
* OS coding including real time operating systems (RTOS).
* Communication protocols including UDP, TCP/IP, Modbus, SFTP, IMAP, Ethernet, IoT protocols and standards.
* C++, C, Java, Python, assembly language.
* Knowledge of application programming interface (API).
* Experience with digital control systems.
* Knowledge of quality and reliability engineering principles.
* Experience working with suppliers.


If you are interested in the Embedded Software Engineer job in Phoenix, AZ, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313554
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/18/2021
Last Updated: 08/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Electrical Engineer

Description:
A FPGA Electrical Engineer job is currently available at Belcan in Lexington, KY. This is a full time, direct job with full benefits. Great matching candidates will have a Bachelor's Degree in Electrical Engineering (or similar), with at least five years of experience with FPGA design & programming. You will be participating in FPGA design from requirements development to hardware implementation for the aerospace and defense markets.

FPGA Electrical Engineer job duties:
* Program requirements decomposition, analysis, definition, and traceability using tools such as DOORS or equivalent.
* Program requirements verification (acceptance test plans, test reports, analysis reports, inspection reports) and validation for regulatory approval (example: avionics certifications using DO-254).
* Support hardware requirement generation with systems and subsystems teams to determine meaningful and testable requirements for the design, preferably in a model-based system engineering environment (MBSE).
* FPGA programming/development in Verilog/VHDL/System Verilog.
* Assist in electrical design and development, PCB Design and layout, wiring/harnesses, performance, risk, safety, operation and design reviews.
* Electrical Hardware in loop testing.

Qualifications:
* Bachelor of Science Degree in Electrical Engineering, Computer Engineering, or related STEM field.
* Five to 10 years' experience focused on FPGA development or electrical/hardware development/integration (preferably within the aerospace software/systems, power systems, or complicated technical systems area)
* Required experience in Verilog/VHDL/System Verilog
* Familiarity with design/analysis of electrical systems for EMI/EMC compliance
* Atlassian tools experience (JIRA, Confluence, Git)
* Experience in LINUX / RTOS (including Red Hat)
* Scripting, Programming and Analysis: TCL, Python, Linux shell and Windows batch scripting; C / C++; MATLAB / Simulink, Rhapsody CAMEO MagicDraw, Python, HSPICE and HFSS (or similar modeling/analysis tools)
* Legal authorization to work in the US required: US Citizenship due to nature of the work
Desired but not required:
* Regulatory experience preferred: DO-254, DO-160, Mil 704, 461, 464 or similar automotive standards
* Ability to deal with ambiguity, to be adaptable, to work across multi-discipline teams, solve complex problems and to drive results

If you are interested in this FPGA Electrical Engineer job in Lexington, KY please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 312292
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/06/2021
Last Updated: 10/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer - SW Developer

Description:
Inconen is looking for a Flight Test Instrumentation Engineer - SW Developer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Experience developing software programs in any of the following languages: Python, JavaScript, Java, C#, C, or C++
2. Experience developing graphical user interfaces
3. Strong communication skills
4. Ability to develop and test prototype applications on flight test hardware to validate designs

Education and Experience Requirements:
1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. Entry level. 0 to 18 months experience.

Position Purpose:
1. Performs engineering work related to the investigation and solution of basic problems associated with research, design, development, service and manufacture of company aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Provides technical assistance to engineering staff and contributes by completing discrete engineering tasks on schedule
2. Using company procedures, applies engineering knowledge to resolve routine issues
3. Analyzes and evaluates results of project activities
4. Prepares recommendations for changes and compiles necessary reports for various department supervision
5. Recognizes discrepancies and/or problems with analysis/test results and works toward corrective action

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Continues learning and developing knowledge of application of technical principles, theories, and concepts in assigned field of expertise
3. Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade level will be established by each discipline.
2. Work is closely supervised/monitored, follows established procedures and methods.
3. Failure to achieve results may cause delays in program schedules.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily with direct supervisor, mentor, and other exempt professionals in the group or department.
6. Works under general supervision for most tasks.
 
Job Number: 15375
Job Location: Savannah, GA
Rate: $30.99 - $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 12/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Graphics Software Engineers - Aerospace - Avionics - China.

Description:
Graphics Software Engineers - Aerospace - Avionics - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Graphics Software for Avionics.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
  • Bachelors Degree or above.
  • Proficient in C or C + + language, good framework and module design ability, good programming habits.
  • Have strong communication skills, language skills, and strong ability to analyse and solve problems.
  • Familiar with Linux or VxWorks series operating system, have a deep understanding of operating system operation principle, GNU compiler tool chain and script programming.
  • Working background in avionics system / software is preferred, familiar with OpenGL / ARINC661 standard is preferred.
  • Computer graphics related background is preferred.

Role and Duties:
  • R & D Engineer of positioning graphics software, responsible for the development and optimization of general graphics components, SVS and TAWS.
  • Research and development of graphic service software.
  • Expand and develop ARINC661 server software.
  • Develop HMI related display interface.
  • Develop SVS / TAWS.
  • Support the development of application software.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-389
Job Location: China, China
Rate: Remuneration Negotiable
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 06/28/2021
Input Date: 06/29/2021
Last Updated: 07/27/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities Engineer

Description:
Position Responsibilities:

Test planning, execution, and reporting on FAA flight tests for Flight Characteristics, Category-A Performance, Category-B Performance, and other related flight tests.
Technical lead for:
Test preparedness and planning including test plan writing
Preparing and presenting company test data packages to the FAA
Preflight test team briefs
Real-time telemetered flight tests
Post-flight team debriefs
Test data analyses
Final test report authoring
Interface with other disciplines (e.g. Avionics, Powerplant, etc.) and organizations both internal and external (FAA, Bell Flight Test Engineering, etc.)

Education Requirements:

Major in Aerospace Engineering or Mechanical Engineering is preferred.
Related degrees with relevant experience will be considered.

Position Requirements:

All years of experience will be considered, preferred at least 5+ years of relevant experience in Aerospace industry is preferred
Must be a proven self-starter and leader requiring minimal supervision, with excellent written and oral communication skills, and computer skills
Familiarity with the following is preferred:
Aircraft / Helicopter flight test and supporting activities
Flight Characteristics / Handling Qualities test and analytical experience
FAA Part 29 or similar FAR regulations or similar military qualification
IADS software for real-time telemetry flight test operations
Bell’s CAFTA flight test data software system
MathWorks MATLAB and Simulink software
ADS-33 and other Handling Qualities specifications
Experience with configuration management tools such as Enovia
Flight director, navigation, autopilot and autonomous flight systems
6 degree of freedom simulation models

The recruiter's contact number is 469-785-4744.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61567
Job Location: Arlington, TX
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: one year
Start Date: July-Aug
Input Date: 07/13/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer

Description:
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

Integration Engineer 2 duties:

* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.

EDUCATION AND EXPERIENCE REQUIRED:

* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 313425
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/24/2021
Last Updated: 08/02/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Description

General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.


Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.


Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company LLC is an AA/EOE.
 
Job Number: 467
Job Location: Greensboro, NC
Rate: $60-$62/Hr.**DOE**
Per Diem: Yes
Overtime: Possible
Duration: 1+ Year
Start Date: 4-6 Weeks
Input Date: 05/11/2021
Last Updated: 07/30/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
LRU and Components Engineer - Engine Control System

Description:
This position is responsible for requirements management of line replaceable units (LRUs) and components used on a new aircraft turbine propulsion system. The successful candidate will have systems engineering experience and understand how to develop and flow system requirements to the individual LRU and components suppliers.

REQUIRED SKILLS:

* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* Systems requirements flow down & management experience
* Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
* Understanding of design process
* Understanding of qualification process
* DOORS proficiency
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:

* Supplier Management of Components such as valves, temp/pressure sensors, torque sensors, etc.

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:

Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 6 mo +
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Labview Programmer

Description:
Qualifications:
• software developer in LabView
• Proven Realtime experience with high speed data acquisition
• Demonstrated knowledge of multiple chassis synchronization
• Must be comfortable with…
o Parallel loops
o TCP/IP
o Object oriented programming
o Message handling
o MathScript or Matlab
 
Job Number: TX5874
Job Location: TX
Rate: Very Good
Per Diem: offered
Overtime: NO
Duration: 12 Months plus
Start Date: 2/3 wks from offer
Input Date: 06/23/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
Previous Gulfstream planning and/or shop floor experience preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15133
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (2nd Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (2nd Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. This position is for 2nd shift.
2. Previous Gulfstream shop floor experience supporting live aircraft preferred.
3. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15330
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 08/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2nd Shift

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• This position is for 2nd shift. Previous company shop floor experience supporting live aircraft preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-544
Job Location: Savannah, GA
Rate: $52.50-55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 05/21/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Operations Analyst

Description:
• Position requires experience of aircraft maintenance/modification.
• Knowledgeable in shop mathematics and practices sufficient to perform assigned duties.
• Experience in working with schematics, specifications, assembly drawings and standard operating procedures.
• Proficient in computer skills including but not limited to: aircraft related systems and basic office software.
• Experience with VIP aircraft or specialty aircraft interiors installations.
• FAA certification in Airframe and/or Power Plant AND minimum of seven (7) years’ experience is preferred not required.
 
Job Number: MOA-TX
Job Location: San Antonio, TX
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 06 months
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/21/2021
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 2

Description:
Performs the Make planning activities associated with Manufacturing Resource Planning (MRP) transactions. Performs one or more multiple manufacturing activities within various manufacturing functions. Maintains production systems integrity to drive inventory optimization to minimize cost. Expedites and optimizes material flow through the supply chain to meet customer requirements. Coordinates with manufacturing and Operations Management to provide shop floor control on make parts, analyzes and controls production schedule and capacity requirements, executes the plan, provides timely status and expedites or works around plans to preserve schedule. Coordinates with Supply Chain Stakeholders including Procurement and Operations Management to determine appropriate time phased plan for procured parts and executes processes to ensure deliverables meet production schedule requirements. Maintains MRP parameters including lead times and lot sizes and coordinates with Engineering and Change Board Rep to make the associated changes to the BOM.

MUST BE US CITIZEN. MUST HAVE a 4 year Bachelors degree from an accredited college in a related discipline. - Demonstrated proficient knowledge of computer systems, databases, and programs - Demonstrate strong analytical, problem solving, and multitasking skills - Inventory Control and material handling knowledge - Experience with using Material Requirements Planning Software
Desired - SAP Experience - Understanding of Demand and Supply, across multiple build locations
 
Job Number: 21-16564
Job Location: Ocala, FL
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 7/26/2021
Input Date: 07/16/2021
Last Updated: 07/21/2021
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner Level 2

Description:
1. Performs the Make planning activities associated with Manufacturing Resource Planning (MRP) transactions.
2. Performs one or more multiple manufacturing activities within various manufacturing functions.
3. Maintains production systems integrity to drive inventory optimization to minimize cost.
4. Expedites and optimizes material flow through the supply chain to meet customer requirements.
5. Coordinates with manufacturing and Operations Management to provide shop floor control on make parts, analyzes and controls production schedule and capacity requirements, executes the plan, provides timely status and expedites or works around plans to preserve schedule.
6. Coordinates with Supply Chain Stakeholders including Procurement and Operations Management to determine appropriate time phased plan for procured parts and executes processes to ensure deliverables meet production schedule requirements.
7. Maintains MRP parameters including lead times and lot sizes and coordinates with Engineering and Change Board Rep to make the associated changes to the BOM.
8. This facility requires special access and therefore all candidates must be a US Citizen.


Mandatory Skills:

 MUST HAVE a 4 year Bachelor’s degree from an accredited college in a related discipline.
 Demonstrated proficient knowledge of computer systems, databases, and programs
 Demonstrate strong analytical, problem solving, and multitasking skills
 Inventory Control and material handling knowledge
 Experience with using Material Requirements Planning Software



Desired:

SAP Experience - Understanding of Demand and Supply, across multiple build locations

Skill Matrix:

MRP - Experience or training with using Material Requirements Planning Software - 4-5 Years - MANDATORY ON THE RESUME
Operations - Experience or training in a manufacturing environment - 4-5 Years - MANDATORY ON THE RESUME
 
Job Number: JPC - 101854
Job Location: ocala, FL
Rate: $36 per hour W2
Per Diem: split
Overtime: yes
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design

Description:
Must sit onsite at the facility.
Must be USC.
Ability to obtain clearance.
Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).
 
Job Number: CJH-M-3195
Job Location: GRAND PRAIRIE, TX
Rate: $90
Per Diem: Yes
Overtime: Yes
Duration: 10 Months
Start Date: ASAP
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Level 3

Description:
Indotronix seeking an experienced Mechanical Design Engineer for a position in Grand Prairie, TX, to support Production Engineering efforts associated with a legacy missile program.
The candidate for this position will work in a Production Program environment and support Material Review Board (MRB) type activities associated with specific missile / canister components for an international customer. The preferred candidate will be the Mechanical Engineering point of contact for the legacy program relating to Missile and Canister hardware, and will support hardware recertification and production contracts.

The candidate will be expected to screen and evaluate failures, defects, production issues, and/or questions from the international customer and leverage engineering teams as necessary to develop viable solutions, usually in time sensitive situations.

Other notable tasks include: Development of 3D drawing models and creation/release of 2D engineering drawings using 3D CAD Software, preferably PTC CREO-4.

Interface development and generation of Instructional Engineering Release (IER) documents. Technical support to program suppliers for procured components.

Collaborate / Coordinate with other Mechanical Engineering (Structures, Thermal and M&P) and technical disciplines (Electrical Engineering, Systems Engineering, Software Engineering, Product Support), Procurement (Materials and Subcontract Management), Quality Assurance, Manufacturing Engineering, Production Operations, and product line suppliers / vendors.

Provide engineering liaison effort to support the fabrication, assembly and integration tasks associated with the product line, including auditing manufacturing work instructions, production process reviews, and attending supplier audits.

Support product line validations (PLVs) at program suppliers and first article inspections. Review proposed mechanical related changes from the US production team and assess the impacts/applicability to the International program. Interface with customers, a multi-functional team (Engineering, Configuration Management, Global Supply Chain, Contracts, Program Management, Manufacturing, International Trade and Compliance) in a fast-paced dynamic environment to support production and meet program commitments.

Travel to support and provide technical assistance to existing / new suppliers, support hardware fabrication, assembly, integration, and testing activities in CAMDEN, Arkansas, and provide on-site support to the programs international customer.

Mandatory skills:

Must sit onsite at the facility.
Must be USC.
Ability to obtain clearance.
Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).

Desired:

Exposure to Geometric Dimensioning and Tolerancing (GD&T). Experience with detail, assembly, and installation type 2D drawings. Knowledge of manufacturing and manufacturing processes. Knowledge of mechanical drawing standards. The candidate should have experience with Material Review Board (MRB) type experience, where disposition of discrepancy reports will be required by engineering. Knowledge of Microsoft Office software (Excel, Word, and PowerPoint). Knowledge of Agile PLM (for 2D drawing release).
 
Job Number: JPC - 101777
Job Location: Grand Prairie, TX
Rate: $90 per hour on W2
Per Diem: Split
Overtime: Allowed
Duration: 10+ months
Start Date: ASAP
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Level 3

Description:
Indotronix seeks an experienced Mechanical Design Engineer for a position in Grand Prairie, TX, to support Production Engineering efforts associated with a legacy missile program.
The candidate for this position will work in a Production Program environment and support Material Review Board (MRB) type activities associated with specific missile / canister components for an international customer.
The preferred candidate will be the Mechanical Engineering point of contact for the legacy program relating to Missile and Canister hardware, and will support hardware recertification and production contracts.
The candidate will be expected to screen and evaluate failures, defects, production issues, and/or questions from the international customer and leverage engineering teams as necessary to develop viable solutions, usually in time sensitive situations.
Other notable tasks include:
Development of 3D drawing models and creation/release of 2D engineering drawings using 3D CAD Software, preferably PTC CREO-4.
Interface development and generation of Instructional Engineering Release (IER) documents. Technical support to program suppliers for procured components. Collaborate / Coordinate with other Mechanical Engineering (Structures, Thermal and M&P) and technical disciplines (Electrical Engineering, Systems Engineering, Software Engineering, Product Support), Procurement (Materials and Subcontract Management), Quality Assurance, Manufacturing Engineering, Production Operations, and product line suppliers / vendors.
Provide engineering liaison effort to support the fabrication, assembly and integration tasks associated with the product line, including auditing manufacturing work instructions, production process reviews, and attending supplier audits.
Support product line validations (PLVs) at program suppliers and first article inspections. Review proposed mechanical related changes from the US production team and assess the impacts/applicability to the International program.
Interface with customers, a multi-functional team (Engineering, Configuration Management, Global Supply Chain, Contracts, Program Management, Manufacturing, International Trade and Compliance) in a fast-paced dynamic environment to support production and meet program commitments.
Travel to support and provide technical assistance to existing / new suppliers, support hardware fabrication, assembly, integration, and testing activities in CAMDEN, Arkansas, and provide on-site support to the programs international customer.

Mandatory skills:
• Must sit onsite at the facility.
• Ability to obtain secret clearance.
• Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
• Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
• 3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).

Desired skills:
• Exposure to Geometric Dimensioning and Tolerancing (GD&T).
• Experience with detail, assembly, and installation type 2D drawings Knowledge of manufacturing and manufacturing processes.
• Knowledge of mechanical drawing standards.
• The candidate should have experience with Material Review Board (MRB) type experience, where disposition of discrepancy reports will be required by engineering.
• Knowledge of Microsoft Office software (Excel, Word, and PowerPoint).
• Knowledge of Agile PLM (for 2D drawing release).
 
Job Number: CJH-088
Job Location: Grand Prairie, TX
Rate: $90 per hour on W2
Per Diem: split
Overtime: allowed
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operational Flight Program Software Engineer

Description:
1) You will need to have real-time simulation experience
2) Experienced in re-hosting aircraft operational flight programs (OFPs) for simulation purposes?
3) Do you have experience rehosting applications from the Green Hills RTOS to Linux?
4) Are you able to obtain a Secret Clearance?

*No Testers or candidates who are only 'familiar' with architecture. Must have hands on experience to be considered
• Much more important is the domain knowledge a candidate possesses.
• The best candidates will have experience from Boeing or Lockheed Martin, either developing OFPs or re-hosting them for simulation.
*Candidates may be able to start without active clearance but it will limit the actions they can perform. They must be able to obtain a Secret clearance to continue working in this role and be considered for potential conversion to FTE*


The successful candidate will support integration and configuration of computational system architecture and software for real-time simulation applications
• Entry level engineers will support functional requirements implementation for software systems
• Create new simulation models using established and new modeling techniques
• Design, develop, code, integrate and test simulation software to meet requirements
• Troubleshoot and maintain existing simulation models
• Apply software engineering principles to complete assigned tasks and schedule commitments
• Complete work with a reasonable amount of direction
• Must possess the ability to work within and positively contribute to a team environment
• Apply sound engineering principles, develop innovative solutions and participate in design reviews
• Prepare, check and coordinate release of support documentation to appropriate program and company standards
• Communicate status/issues along with solutions/recommendations to lead engineers

Required

• Experience designing and developing software to an ICD (Interface Control Document)
• Experience working in large software systems
• Experience debugging complicated software issues
• Experience developing scripts to automate repetitive file editing tasks
• Integration and Test experience in a collaborative team environment
• Knowledge of compiler differences and ability to modify software for a specific compiler
• Required Languages: C++, Ada, Perl
• Required Operating Systems: Linux

Desired
• Experience working with RTOS (Real-time Operating Systems)
• Experience porting large software systems to new platforms
• Experience developing embedded software for defense applications
• Experience working with MIL-STD-1553 and/or ARINC interfaces
• Experience using gdb or other live debugging tools
• Experience in flight simulation (preferred)
• Knowledge of computer networking standards (Ethernet)
• Experience using Rational ClearCase
• Experience in assembly language programming (any processor)
• Active DoD SECRET or higher clearance
• Desired: FORTRAN, Python
 
Job Number: 20747
Job Location: Arlington, TX
Rate: Based on ExperienceLevel and Skillset
Per Diem: No
Overtime: Possible
Duration: One Year
Start Date: ASAP
Input Date: 07/21/2021
Last Updated: 07/26/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations Analyst I

Description:
An Operations Analyst I job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for generating reports of the physical configuration for completed items, recognizing discrepancies resulting from data entry errors and troubleshooting the associated records and processes. To be considered for this role, you will have a Bachelors degree in a related field and typically 0-2 years of relevant experience.

Operations Analyst I Job duties:

* Work with local personnel and coworkers at other sites to implement the new processes, and train participants.
* Responsibilities will also include publishing metrics on usage of hardware with limited life-consumed vs. allowable and remaining life-to support maintenance planning by hardware owners and Operations.
* Responsibilities will include generating reports of the physical configuration for completed items, recognizing discrepancies resulting from data entry errors and troubleshooting the associated records and processes.
* Overseeing how our flight hardware performance data is imported into the archiving/cataloging system.

Qualifications:

* Experience using PDM/PLM systems such as Windchill and Enovia 3D Experience software.
* Familiarity with forecasting, Key Performance Indicator (KPI) measurement.
* Previous experience with Physical Configuration Auditing and assembling/reviewing certification data packages.
* Knowledge of industry standards in Quality and Configuration Management (AS9100, ISO 9001, EIA-649, MIL-HDBK-61).

Pay Range: $33/hr to $35/hr DOE

If you are interested in this Operations Analyst I position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313747
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/25/2021
Last Updated: 08/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power System Design Engineer

Description:
A Power System Design Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for the electrical technical planning, scheduling, cost analysis, risk analysis, and successful execution of major projects and programs containing substantial complex electrical content. To be considered for this role, you will have a Bachelor's Degree in Electrical Engineering, or a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Power System Design Engineer Job duties:

* Responsible and accountable for the electrical technical planning, scheduling, cost analysis, risk analysis and successful execution of major projects and programs containing substantial, complex electrical content.
* Lead electrical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. timing, power, etc.), interface analysis and definition for the design and verification of electrical components, equipment and systems.
* Use of computer software tools for electrical calculations and electrical schematics used for documenting power system and power circuit designs.
* Drives development of innovative technologies.

Qualifications:

* Experience in specification, design and testing of AC (1-phase/3-phase) power distribution, DC power distribution, power protection/control systems and related circuits.
* Experience in designing for military environments and design for compliance to military standards (MIL-STD-801, MIL-STD-461 and MIL-STD-1275).
* Experience in design for compliance to NFPA 70-National Electrical Code-Note: this is a *MUST HAVE* skill.
* Experience with use of computer software tools for electrical calculations and electrical schematics used for documenting power system and power circuit designs (examples: Microsoft Excel, Microsoft Visio, Cadence OrCad, Mentor Graphics DxDesigner).

If you are interested in this Power System Design Engineer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313764
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/25/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Instrumentation Engineer

Description:
In this role you can expect to lead a small team of engineers and technicians through a fast paced, cutting-edge flight test program. You will be responsible for designing, procuring, installing and troubleshooting the onboard data acquisition system on an exciting new aircraft project.

Ongoing engineering R&D work can be expected upon completion of the flight test project. Following the flight test program, you will work on the research and design of aerospace electrical and electromechanical systems, participate in environmental qualification testing, take part in flight test data acquisition and data reduction, write technical certification documents, and assist in manufacturing, installation, and product life cycle ongoing support.

This job will be primarily based at a test location in Washington State. Occasional travel to home office in Sandpoint, Idaho can be expected. Travel is required.

Job Description: Own the development, design, engineering and function of an onboard flight test data acquisition system. Position reports to Program Lead Engineer. Other expected duties include:

Define requirements for onboard data acquisition and telemetry system
Direct small team of engineers & techs to meet the needs of the program
Design and implement hardware and software solutions for ground and flight test
Work closely with vendors and partners
Install sensors, wiring, an any required electronic equipment in experimental test vehicle
Generate and review wiring diagrams, bill of materials, and installation drawings
Prepare data system for daily test execution
Calibrate, validate, document, and troubleshoot all installed sensors and equipment
Participate in ground, bench, and flight tests.
Data capture, storage, processing and analysis.
Draft proposals, cost estimates, plans, reports, and other documents as required
Review technical drawings and service documents to ensure compliance with engineering specifications and regulations
Qualifications:

10+ years instrumentation experience in experimental flight test
Experience leading an instrumentation effort is strongly preferred
Experience in Data Acquisition and software integration
Applicant must have experience using MS Excel, and MS Word
Applicant must demonstrate good technical writing skills
Must be able to communicate clearly and effectively within a multi-disciplinary team structure.
Fluency in written and spoken English is required
Education:

B.S. in Electrical Engineering or equivalent.

The Structures Company LLC is an AA/EOE.
 
Job Number: 498
Job Location: Arlington, WA
Rate: Up to $80/Hr., DOE
Per Diem: Possible
Duration: 6-12 Months, possibly longer
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 12/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
804 Technology is currently looking for a Process Engineer with CaapsNC software experience for a contract job opportunity located in Grand Prairie, TX. My contact information is listed below. If you are interested please respond be sending me your resume and your availability. Thank you in advance for your time.
Salary: Based on Experience

Brian Smith - 636-928-0330
bsmith@804technology.com

The ideal candidate will possess a thorough knowledge of the following:
• Responsible for creating in process probing programs for a leading aerospace company during the launch of new type of aircraft
• Creation of probing routines using CaapsNC software
• Part model extraction for programming using Catia V6
• Performing and interpreting probing data on Drive System / Rotor components and assemblies.
• Maintain all programs and documentation developed at Bell
• Must have Catia V5 /V6 experience along with 5+ years N/C Programming
• Effective communication and interpersonal skills required to interface with executive management and customer representatives.
• Proficient in the use of Microsoft Office products (Power Point, Access, Word and Excel).
• Excellent written and verbal communication skills.
• Familiar with 3-4-5 axis Milling and/or multi-axis, multi-function machinery
• Familiar with Makino 4 & 5 axis machines a plus
• Familiar with Zeiss Calyspo and or Hexagon PC-Dmis Software is a plus.

Education
• Two-year degree preferred or work experience in aerospace technical discipline programming.

Experience
• 5 years minimum experience with N/C Programming.
• 1 Year minimum experience with CappsNC


Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
 
Job Number: Process804
Job Location: Grand Prairie, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 4-6months
Start Date: ASAP
Input Date: 07/09/2021
Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
Process Engineer

Location: Grand Prairie, TX (75050)

Duration: 4 months

Rate: Open/W2



****MUST HAVE ONE YEAR EXPERIENCE PROGRAMMING CAPPSNC****


This position exists to provide programming for “in process” Probing Routines at the Drive Systems Center . Primary responsibility is evaluating inspection data, interpreting drawings (Blue Prints) and the engineering intent with GD&T, completing records of inspections, and writing CMM procedures for Various components.

The ideal candidate will possess a thorough knowledge of the following:

• Responsible for creating in process probing programs for a leading aerospace company during the launch of new type of aircraft
• Creation of probing routines using CaapsNC software
• Part model extraction for programming using Catia V6
• Performing and interpreting probing data on Drive System / Rotor components and assemblies.
• Maintain all programs and documentation developed at Bell
• Must have Catia V5 /V6 experience along with 5+ years N/C Programming
• Effective communication and interpersonal skills required to interface with executive management and customer representatives.
• Proficient in the use of Microsoft Office products (Power Point, Access, Word and Excel).
• Excellent written and verbal communication skills.
• Familiar with 3-4-5 axis Milling and/or multi-axis, multi-function machinery
• Familiar with Makino 4 & 5 axis machines a plus
• Familiar with Zeiss Calyspo and or Hexagon PC-Dmis Software is a plus.
Education
• Two-year degree preferred or work experience in aerospace technical discipline programming.

Experience
• 5 years minimum experience with N/C Programming.
• 1 Year minimum experience with CappsNC

Hours: 8:00am to 5:00pm

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61602
Job Location: Grand Prairie, TX
Rate: Open
Duration: 4 months
Start Date: ASAP
Input Date: 07/09/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning Scheduling Analyst Sr.

Description:
Inconen is looking for a Program Planning Scheduling Analyst Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
-Experience developing aircraft modification build schedules.
-Experience developing Integrated Master Schedules and critical path analysis

Education and Experience Requirements:
-Bachelor's Degree in Industrial Engineering, Business Administration, or related curriculum required or equivalent combination of education and experience to successfully perform the essential functions of the job.
-6 years formal scheduling experience with regard to planning, scheduling, and maintaining overall business analysis of managed programs.

Position Purpose:
-Under minimal supervision gathers, evaluates past and present information to develop schedules, program plans, financial and resource plans, and other duties needed to support assigned programs.
-Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principle Duties and Responsibilities:
Essential Functions:
1. Develop and maintain the schedule and/or financial operations of assigned programs that may include any or all of the following coordination with Programs, Engineering, Finance, Operations, Sales, and Product Support.
2. Develop and utilize efficient tools for collecting and maintaining business and financial analysis data. Analyze data to identify financial and non-financial impacts of managed programs.
3. Provide detail information to support planning and implementing development strategy analysis, including risk management and program impact analysis.
4. Interfaces with the Leads and Managers to status, forecast, and build recovery plans to the master schedule.
5. Conduct detail analysis with an emphasis on achieving cost and maximizing savings of the approved budget.
6. Identify opportunities of improvement in planning and scheduling, cost control, productivity, capacity planning and analysis.
7. Assist the suppliers in the development of performance metrics, capacity plans, employee training matrices, milestone plans and project plans.

Additional Functions:
1. Provide management with project status updates, feedback, and appropriate reporting.
2. Coordinate with the departmental leads and managers to flag disconnects between approved budget and schedule.
3. Perform other duties as assigned.

Other Requirements:
1. Requires advanced knowledge and experience with PC based software such as MS Excel, Project, Access, Word and PPT.
 
Job Number: 15165
Job Location: Savannah, GA
Rate: $36.13 - $40.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/15/2021
Last Updated: 10/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager - New York , Remote work

Description:
Project Manager - New York , Remote work

JOB DESCRIPTION
Operating groups are collaborating on a global Product Lifecycle Management (PLM) program. This multi-year journey will consist of numerous projects focused on a global enterprise wide re-implementation of our PLM solution, the Siemens Teamcenter system.

• Under the direction of the Product Lifecycle Management (PLM) Rollout Project Manager provide critical support of the rollout of the Aerospace & Defense PLM Teamcenter software solution to Space and Defense and Aircraft groups worldwide by driving the data evaluation and migration effort including scheduling, tracking tasks, completion status, and monitor task progress

• Organize project planning, risk assessments and status meetings with small groups of PLM team members and engineering representatives in relation to data migration activities
• Drive the System Integration Testing (SIT) and User Acceptance Testing (UAT) events to organize all team members from the PLM team and business engineering representatives to test the migration solution

• Work with external vendor on touch point for migration activities
• Coordinate regular meetings between migration vendor, target site, and PLM migration team
 
Job Number: 698743002
Job Location: Remote, NY
Per Diem: NO
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 07/09/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer - Melbourne, FL/ Fort Worth TX

Description:
Responsible for testing a component, feature and or feature set. Works independently and contributes to the immediate team and to other teams across business. S/he contributes to quality engineering discussions.

Essential Responsibilities:

In this role, you will:

Own small-sized quality engineering tasks; and delivers as per the commitments, while helping team members
Make technology choices at individual level and has ability to analyze impact
Apply principles of SDLC and methodologies like SAFe/Agile, CI, Software and Product Security, Integration, Scalability, Documentation Practices, refactoring and Testing Techniques
Integrate project testing with continuous-integration process
Prepare Reusable functions, which improve the robustness, re-usability, and maintainability of the test scripts
Work with fellow team members to diagnose defects and formulate solutions
Develop and executes maintainable automation tests for acceptance, integration, end-to-end, functional, and regression test cases

Basic Qualifications:

Bachelor’s Degree in Computer Science or in “STEM” Majors (Science, Technology, Engineering and Math)
A minimum of 5 years of professional experience in OR Master’s degree with 3 years of experience

Legal authorization to work in the U.S. is required. Wabtec may agree to sponsor an individual for an employment visa now or in the future if there is a shortage of individuals with particular skills.




Desired Characteristics:

Technical Expertise:

Extensive experience in test automation using RestAssured, API Automation or other API automation tools with coding knowledge in Java in a SAFe/Agile environment
Working knowledge of CI/CD to support continuous automation and deployment process with basic knowledge of Linux/Unix scripting is required
Experience with issue-tracking and agile project management tools such as Rally, XWiki, HP ALM etc.
Experience working with virtual machines (VMs) as part of a test/integration infrastructure
Knowledge of cloud technologies in AWS

Business Acumen:

Demonstrates the initiative to explore alternate technology and approaches to solving problems
Skilled in breaking down problems, documenting problem statements and estimating efforts
Demonstrates awareness about competitors and industry trends
Has the ability to analyze impact of technology choices

Leadership:

Ability to takes ownership of small sized tasks and deliver while helping team members
Ensures understanding of issues and presents clear rationale. Able to speak to mutual needs and win-win solutions. Uses two-way communication to influence outcomes and ongoing results
Identifies misalignments with goals, objectives, and work direction against the organizational strategy. Makes suggestions to course correct
Continuously measures deliverables of self and team against scheduled commitments. Effectively balances different, competing objectives

Personal Attributes:

Strong oral and written communication skills
Strong interpersonal skills
Effective team building and problem solving abilities
 
Job Number: 10430-1
Job Location: Melbourne, FL
Rate: 60/hr
Input Date: 07/20/2021
Firm Name: ADVANTIS GLOBAL
Attention: Kelsey Alton
Address: 200 E CAMPBELL AVE 2ND FL
City, State: CAMPBELL, CA 95008
Phone: 415/612-3338
Website: www.advantisglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineering Manager

Description:
An RF Engineering Manager job in Round Rock, TX is currently available through Belcan with one of our Electronics repair clients in the semi-conductor industry. You will be responsible for all engineering activity at company. Products include Radio frequency and DC power delivery systems. To be considered for this role, you will need a BSEE or MSEE degree or another relevant engineering field and at least 8 years of relevant experience. This is a great opportunity with a growing company.

RF Engineering Manager Job duties:

* Responsible for all engineering activity at company
* Leads both tactical and strategic technical responses to customer needs.
* Lead a group of experienced engineers to support the repair of over 700 different products, evolving processes, and techniques with new technology.
* Experience in RF and DC equipment for the semi-conductor industry
* Lead the company into a full PLM system upgrade integrated with the existing ERP system.
* Work with outside suppliers such as PCB, PCBA assembly, and Machine Shops to realize designs.
* Mentor growth in both teams and on an individual level.

Qualifications:

* BSEE or MSEE degree or another relevant engineering field.
* Must have three years of experience managing engineering teams delivering successful products/projects-additionally, at least five years of as a practicing engineer with experience in RF or related fields. A total of eight years experience minimum.
* Have a proven ability to manage both Engineering Technicians and Engineering Professionals' teams to motivate, set priorities, and facilitate.
* Understand the difference between a product repair organization and a manufacturing/product production company and what contributes to the productivity of both.
* Demonstrated experience with CAE software such as Genesys, Sonet, Alibre, and Circuit Studio or equivalent tools.
* Applicant will need to have an applied understanding of electrical, mechanical, and software disciplines to lead this team.
* Knowledgeable in RF generators and matching networks in the 400KHz to 200 MHz spectrum with power levels of several Kilowatts (not cell phone technology).

If you are interested in this RF Engineering Manager job in Round Rock, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 312582
Job Location: Round Rock, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/14/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Seeking a Reliability Engineer to provide general Specialty Engineering.
Reporting to the Logistics and Sustainment Engineering (LSE) Manager, candidate will assist in the execution of Reliability, maintainability, testability and safety activities with minimal supervision.
This position develops, coordinates and conducts technical studies and evaluations of engineering design concepts and design of experiments constructs.
Candidate will be required to provide status on activities as part of monthly program reviews, failure review boards, and corrective action boards.
Reports status of technical performance, schedule performance, and budget performance
Participates in technical and programmatic reviews and meetings
Interfaces with multi-disciplined / cross-functional teams to achieve success (Production Operations, Contract Management, Engineering, Quality, Business Ops and Program Management)

Mandatory skills:
Must be USC.
Must be able to sit onsite at facility.
Active secret.
Requires 5 - 10 years of experience.
Candidate should be a self-starter capable of performing assigned tasks with little or no direction and interface well with other program disciplines.
Candidate should be an analytical thinker with demonstrated ability of solving complex problems which require ingenuity and innovations.
Proven Reliability, Maintainability, and FRACAS experience.
Experience with performing reliability predictions.
Experience with reliability FRACAS and data mining.
Experience with RelM software tools.
Excellent written and verbal communication skills.
 
Job Number: CJH-M-3165
Job Location: Orlando, FL
Rate: $90
Per Diem: Yes
Overtime: Yes
Duration: 9 Months
Start Date: 8/02/2021
Input Date: 07/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. Electronic Hardware Design Engineer

Description:
A SR. Electronic Hardware Design Engineer job in Everett, WA is currently available through Belcan. In the SR. Electronic Hardware Design role, you will responsible for analysis, requirement definition, design, test and verification, integration and troubleshooting of complex electronic hardware systems, including certification. As a Senior Engineer, you will be leading development projects, including schedule and cost performance, and provide engineering mentorship.

SR. Electronic Hardware Design Engineer job duties:

* Lead Hardware Design electronic circuits developments for our audio systems, including
overseeing airborne electronic hardware device full life cycle development, from conception to
certification
* Define systems and electrical requirements for new design or updated designs
* Develop detailed performance specifications
* Perform preliminary and detailed design activities - including block diagrams, trade off studies
and design reviews, schematic capture, design analysis, prototype tests, and design reviews
* Develop equipment to support integration test and documentation for certification
* Provide troubleshooting support to New Product Introduction manufacturing
* Lead all project phases from planning to execution and certification
* Lead design reviews
* Work with internal and external customers
* Oversee efforts of and mentor less experienced engineers

EDUCATION AND EXPERIENCE REQUIRED:

* B S. in Aerospace/Electrical/Computer Science Engineering
* 7+ years's experience in hardware electrical design
* Experience with avionics or audio aircraft subsystems
* Demonstrated experience or credentials (PMP) in project execution and completion
* An entrepreneurial spirit (proactive, resourceful, highly motivated with good communication
skills)
* Solid understanding of manufacturing and design trade-offs
* Solve complex problems with minimal supervision and tight schedules
* Experience with simulation software
* Experience in showing compliance in accordance with FAA regulations associated with Airborne
Electronic Hardware (AEH)
* Strong understanding of Do-254 and ARP 4754A

If you are interested in this SR. Electronic Hardware Design Engineer role located in Everett, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 312345
Job Location: Everett, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/08/2021
Last Updated: 08/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Software Engineer

Description:
REAL TIME CONSULTING (An RTCo Company)—POSITION DESCRIPTION
JOB TITLE: Senior Avionics Software Engineer

ABOUT THE JOB:
This position is responsible for software life cycle support including development of requirements, design, and documentation of software in support of an Advanced Data Transfer Unit (ADTE). Desired individuals are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Computer Engineering
• Minimum of 7 years of experience in a related Software Design Engineering discipline
• Understanding of the software development lifecycle
• Proficiency with embedded software design and development, preferably for Avionics applications
• Ability to code in multiple languages (C and Ada)
• Experience reviewing code and extracting functional requirements from the code.
• Experience developing software requirements for avionics applications
• Proficiency performing functional and software architecture development
• Experience and proficiency using the DOORS requirements management tool.
• Experience with Software architecture and coding, and integration
• Experience with verification and Validation Strategy and Methods
• Experience developing sample functional code proof of concepts in Perl, Python and Simulink

PREFERRED SKILLS:
• 15 years of experience in a related Software Design Engineering discipline
• Ability to work with cross functional teams
• Strong oral and written communication skills
• Strong interpersonal and leadership skills

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 4 months
Start Date: ASAP
Input Date: 07/13/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Digital Hardware Engineer

Description:
A Senior Digital Hardware Engineer role located in Chandler, AZ is currently available through Belcan. The Senior Digital Hardware Engineer product design and manufacturing technologies and families include but are not limited to:

Up/Down Converters Hybrid Microelectronics
Switch Filter/Amplifier Assemblies Surface Mount Technologies
Sources & Synthesizers Integrated Multichip Modules & Assemblies
Transceivers Monolithic/Hybrid/Discrete Components
Receiver Exciters Analog/Digital Control Electronics

The Engineer's role involves full life-cycle product development from system concept and requirements through design, production, and verification, working in integrated product teams spanning RF Design Engineering, Manufacturing, and Program Management.

Senior Digital Hardware Engineer duties:

* Hardware and firmware development and verification for PIC/microcontrollers and FPGAs
* Design, develop and test digital subsystems using CPLDs, FPGAs and or discrete logic
* Schematic capture and board layout using PADS
* Design complex multi-layer mixed signal digital control boards
* Use of basic test equipment for analysis and debugging of analog and digital circuits including
oscilloscopes, logic analyzers, power supplies, and function-generators (familiarity with signal
synthesizers, spectrum analyzers and other RF equipment desired)
* Data bus I2C, SPI, RS422, RS232, UART
* Conversion of customer requirements to required hardware and firmware design
* Hands on resolution of technical problems during test and integration
* Generate and review technical product documentation, ICD's and presentation documentation for
customer design reviews
* Work effectively with all functional groups to achieve product performance and cost targets.
* Build quality and manufacturability into the design. Define/understand/comply with company and
regulatory guidelines to assure a safe operating environment
* Understand, decompose, and define product and process requirements to support product
development, sustaining and R&D
* Generate and review product development documentation including proposals, technical reports,
procedures, correspondence, etc. necessary to satisfy customer and program requirements.
* Self-directed and motivated while working and communicating effectively within a team
environment that consists of RF design engineering, operations, quality, and business disciplines
* Design test equipment hardware and software, select and procure equipment necessary to
obtain desired results and accuracy, integrate and/or build automated test systems of low or
medium complexity
* Design, code and debug computer/data acquisition systems necessary for
automated testing.

EDUCATION AND EXPERIENCE REQUIRED:

* Education/Certification: BA or BS Degree in an engineering discipline. Masters or PhD preferred.
* Experience: min of 5-10 years of relevant work experience
* Experience programming using C in an embedded environment a plus
* Experience in PADS a plus
* Experience with Xilinx Spartan 7, Xilinx Zynq-7000, and LabVIEW a plus
* Experience with Automated test system design, and programming of data acquisition systems a
plus
* LabVIEW, TestStand, or similar system-design platforms. SPICE, CADs, Schematic Design and
Layout
* Expertise in digital component design and analysis, modeling and simulation, layout and circuit
level design and test
* Product development experience with meeting customer schedules is needed

If you are interested in this Senior Digital Hardware Engineer role located in Chandler, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 311838
Job Location: Chandler, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/22/2021
Last Updated: 08/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Architect Engineers - Aerospace - China.

Description:
Software Architect Engineers - Aerospace - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialists with strong experience In Software Architecture relating to Avionic Systems.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:

  • Bachelors Degree or above.
  • Proficient in C or C + + language, good framework and module design ability, good programming habits.
  • Have strong communication skills, language skills, and strong ability to analyse and solve problems.
  • Familiar with Linux or VxWorks series operating system, have a deep understanding of operating system operation principle, GNU compiler tool chain and script programming.
  • Working background in avionics system / software is preferred, familiar with ARINC 653 operating system is preferred.

Role and Duties:
  • Positioning software architecture engineering, responsible for the overall software design of the whole display system, demonstration of related schemes, etc. the main responsibilities are as follows:
  • Design the software architecture of the display system.
  • Support system level architecture design of display system.
  • Responsible for software integration of application, basic components and operating system platform.
  • Responsible for the development of general basic services of display system.
  • Support the research and development of application software and underlying basic software.
  • Responsible for the overall software demonstration of major projects and platform professional construction.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-388
Job Location: China, China
Rate: Remuneration dependant upon experience level
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 06/28/2021
Input Date: 06/29/2021
Last Updated: 09/09/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Development Engineer - Control System

Description:
This position is responsible for design of Full Authority Digital Engine Control (FADEC) software used for control of aircraft turbine engines.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Controls systems software development
• Engines/Propulsion, APU, or Flight Controls experience
• Knowledge of DO-178B/C Level A (DAL A) and its application in the development of complex systems software
• Software architecture experience
• Expert in translating software requirements to C language code
• Experience in design and code traceability
• Familiar with requirements capture and management, and associated tools
• Familiar with Software Change Request (SCR) processes and tools
• Familiar with software configuration management processes and tools

PREFERRED SKILLS:
• Engines/Propulsion product experience
• Familiar with DOORS for engineering requirements management
• Familiar with ClearQuest for management of SCRs
• Familiar with ClearCase for software configuration management
• Familiar with Rhapsody design modeling
• Experience with derived requirement impact dispositions

THE FOLLOWING SKILLS WOULD BE A PLUS:
• Experience developing DO-178B/C certification planning documents

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Verification Engineer - Eng. Contractor 3

Description:
Inconen is looking for a Software Verification Engineer - Eng. Contractor 3 for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Degree in Software Engineering, Aerospace Engineering, Computer Science, or equivalent.
2. Familiarity with real-time embedded software applications, preferably for airborne electronic systems.
3. Experience performing software verification activities for airborne electronic systems preferred (Flight Control Systems or Avionics for example).
4. Proficient in MATLAB/Simulink.
5. Experience performing Hardware in the Loop testing, including unit testing (test bench) and in a lab integrated with peripheral systems and real-time simulations.
6. Basic understanding of C/C++ or an equivalent programming language.
7. Familiarity with DO-178C and DO-331 preferred.
8. Capable of working with Version Control Systems (SVN, git, or equivalent).
9. Experience writing software requirements.
10. Experience authoring requirements-based test procedures.
11. Working knowledge of the principles of control science and theory.
12. Ability to read and understand functional block diagrams.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related advanced degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members.
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
4. Determines and develops own approach to solutions within schedule and cost objectives.
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12899
Job Location: Savannah, GA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/02/2021
Last Updated: 09/13/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr RF Design Engineer

Description:
A Senior RF Engineer role located in Chandler, AZ is currently available through Belcan. Sr RF Engineer will use established procedures and work under limited supervision to perform assigned tasks by working cross-functionally with Engineering, Operations, Suppliers and Customers. Provide engineering services for RF/Microwave/ Millimeter military hardware systems for defense application including responsibility for product design, technical proposals, prototype to production, performance, customer presentations, schedule, and cost requirements. Will have expert knowledge of concepts, practices and procedures of assigned product or program.

Sr RF Engineer duties:

* May lead a team of engineers on assigned projects. Some of our products include:
*Up / Down Converters *Hybrid Microelectronics
*Switch Filter/Amplifier Assemblies *Surface Mount Technologies (SMT)
*Sources & Synthesizers Transceivers *Monolithic / Hybrid / Discrete Components
*Receiver Exciters *Integrated Multichip Modules & Assemblies
*Analog / Digital Control Electronics
*End to End Systems cascade analysis, utilizing modeling and circuit simulation software tools or
system performance using analytical tools.
* Detailed analysis and design of RF (from VHF through millimeter-wave) and mixed-signal
communications hardware components (front ends, IF sections, phase-lock loops, AGC loops,
synthesizers).
* Linear and EM simulation analyses of planar and 3D circuits.
* Filter modeling, analysis and design, using microstrip, stripline and lumped element.
* System integration, test and development of RF/millimeter-wave communications hardware for
spaceflight.
* Schematic capture and PWB/PCB layouts for complex multi-layer designs, including RF circuits &
features, DC support circuitry.
* Investigate, evaluate new emerging technologies for integration into products.
* Work with interdisciplinary teams to ensure that the designs meet the customers electrical,
environmental as well as internal manufacturing requirements and standards.
* Function as technical interface for customers and attend technical meetings as required.
* Translate customer specification; generate design documentation required for prototype and/or
production releases as needed.
* Document new designs per established guidelines including but not limited to simulations, test
circuit measurements, tolerance analysis, thermal and stress analysis.
* Provide appropriate input to the development of test procedures, fixtures and software.
* Respond to RFQ/RFPs input & quote information relative to Engineering & Production cost.
* Any other tasks assigned by your supervisor or management.

EDUCATION AND EXPERIENCE REQUIRED:

* Education/Certification: BS degree in Electrical Engineering minimum, Master's or PhD in EE
preferred.
* 10+ years of experience in microwave/milometer-wave design theory component design;
Experience with high reliability hardware from conceptual design through flight delivery;
Experience with microwave modeling tools (I.e. Genesys, ADS, AWR Microwave Office,
AnsoftHFSS, Ansoft Designer, Ansoft Maxwell, MATLAB and AutoCAD or equivalent software.
* Knowledge of RF/Microwave theory; Systems architecture, RF architecture, RF/Microwave circuit
design; Detailed knowledge of RF and mixed-signal design techniques and technologies,
including receivers, frequency converters, synthesizers, and transmitters, mixers, amplifiers,
PLLs, low phase noise VCOs, filters, etc., from DC > 40Ghz; Magnetic circuit analysis experience
desired.
* Applicants selected could be subject to a Government security investigation and must meet the
eligibility requirements for access to classified information.
* Eligibility requirements include U.S. Citizens

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 311839
Job Location: Chandler, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/22/2021
Last Updated: 08/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Staff Software Architect - Melbourne, FL / Fort Worth, TX / Atlanta, GA / Remote

Description:
Job Overview: Senior Architect experienced with cloud native technologies is needed to help lead a large program on a multi-year contract. This position will be responsible for helping lead a large scale and a long-term product strategy centered around native cloud architecture and Java related technologies.

Essential Responsibilities: In this role, you will:

Lead and coordinate the domain technical and business discussions relative to future architecture direction across the product portfolio or product line.
Deliver Cloud Native Architecture for large Railroad for an Enterprise scale application that utilizes Microservices Software Development Principles.
Work with software development teams to provide software framework components that achieve architectural objectives and accelerate software delivery.
Understand security and compliance requirements; establish seamless integration with Cyber Security and Compliance teams. Support Cyber Security procedures for the product portfolio.
Serve as a Subject Matter Expert (SME) for the Dispatch technical architecture including tool, shared libraries and runtime efficiency
Mentor and teach the engineering population on best practices
Work hand in hand with the DevOps team
Drive delivery of configurable product architecture to solve common problems driving towards product architecture vision. Deliver framework components and design guidelines for services and library components.
Demonstrate expert level skill in problem decomposition and ability to navigate through ambiguity
Engage frequently (80%) with the development team; facilitate discussions, provide clarification, story acceptance and refinement, testing and validation; contributes to design activities and decisions
Maintain overall industry knowledge and trends to show leadership to employee base and customers
Provide accurate and timely status of Content plan and current execution status to Wabtec engineering leadership
Demonstrate superior persuasion and influencing skills that ensure alignment between customer, product manager and engineering team
Demonstrates excelling business acumen, knows latest industry trends and is looked at as an internal expert on the product as well as the associated competitive landscape
Coach and Mentor junior team members

Basic Qualifications:

Bachelor’s Degree in Computer Science or in “STEM” Majors (Science, Technology, Engineering and Math)
5-10 Years of experience in architecture, software design and cloud technologies
Proven understanding of software and system level design patterns using Java and related software ecosystems


Eligibility Requirements: (Country Specific)
Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas
Must be willing to travel up to 15%
Location is flexible, ideally
Desired Characteristics:

Hands-on experience with cloud native technologies, deployment, and customer engagement.
Experience in Red Hat technologies such as Quarkus, JBoss, Red Hat SSO, RHEL.
Experience with distributed SQL systems, messages systems such as AMQP, Kafka and cache systems such as Redis.
Proven experience in delivering Highly Available 5-9s application for mission critical system.
Advanced understanding of Kubernetes, software design patterns for HA and versioned microservices
Ability to understand the technology stack and its impact on the final product. Capable of efficiently conducting customer and stakeholder interviews and elaborate on personas.
Experience with Rally, Jira, or other defect/work tracking tools. Capable of generating Agile metrics reports (burn-up, burn-down, velocity, etc.) and interpreting the results for larger audiences.
Superior knowledge of the Software Development Life Cycle and strong collaboration history with Quality Engineering and Dev Ops teams.
Strong problem-solving abilities and capable of articulating specific technical topics or assignments to others. Ability to break down complex problems and estimate level of effort.
Understanding of microservice based and message driven architectures

Business Acumen:

Demonstrates the initiative to explore alternate technology and approaches to solving problems
Skilled in breaking down problems, documenting problem statements and estimating efforts
Has the ability to analyze impact of technology choices
 
Job Number: 10472-1 -
Job Location: Remote
Rate: 95/hr
Duration: 1 year
Start Date: ASAP
Input Date: 07/20/2021
Firm Name: ADVANTIS GLOBAL
Attention: Kelsey Alton
Address: 200 E CAMPBELL AVE 2ND FL
City, State: CAMPBELL, CA 95008
Phone: 415/612-3338
Website: www.advantisglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Facility Maintenance Technician

Description:
Belcan has a job with a service client for a Senior PLC/Maintenance Technician located in Riverside, CA This person will function as one of the Sr.Lead Technician's at the customer site for a long term maintenance contract.
Key responsibilities;
* Preventive and predictive maintenance, scheduled maintenance, corrective maintenance, scheduled repairs, emergency repairs, and performs complex maintenance on tools, test equipment, etc.
* Log all service work performed, downtime during repair, and account for equipment service requests of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs.
* Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
* Guides on-site technical and operational support in the design, development, installation and maintenance of equipment and systems of a very complex nature. Guides very complex site surveys to develop base or installation design plans. Guides training customers to maintain and adjust very complex equipment. Develops and submits reports covering all job activity. Guides the maintenance of very complex tools, test equipment, calibration items, etc. May develop the planning and estimating of labor categories, rates, material dollar costs, transportation expenses and per diem rates to complete very complex proposals. Guides the review of very complex task plans, drawings, and installation schematics and provides continual guidance throughout task duration.
* Mentors junior techs. Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
* Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements and service training to customers.

Qualifications;
* Associate degree required, BS/BA in related discipline preferred. Specialized skill training/certification may be required.
* Skills including a balance of Electronics, Electrical and Mechanical skills with an emphasis on Controls.
* Strong electrical mechanical background and ability to troubleshoot problems. Need to be able to perform maintenance functions and make repairs in a professional and workman like manner. Need to learn system operations in quick fashion. Needs to be willing to follow procedures and read prints, schematics. Must have an excellent safety record. Must have AB PLC and RS Logix experience. Must have Rockwell software experience. Must be able to utilize CMMS.
* Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
* Five years maintenance experience with some conveyor equipment and material handling experience is preferred.
* Demonstrates and applies comprehensive knowledge of field of specialization to the successful completion of complex assignments. Demonstrates advanced knowledge of concepts, practices, and procedures of particular area of specialization. Demonstrates significant knowledge of organizations business practices and issues faced and contributes to problem resolution of those issues. Generally, 5 years of successful experience in area

THERE IS A FIRST SHIFT & 3RD SHIFT POSITION
Hours that we will work when we are 24/7
1st 5:30am - 2:00pm
3rd 9:30pm - 6:00am

THIS IS A CONTRACT TO HIRE POSITION. AVERAGE PAY IS $30.00/HR. SALARY BASED ON EDUCATION, JOB KNOWLEDGE, AND EXPERIENCE. ROTATIONAL WEEKENDS.

If you are interested in this Senior Maintenance Technician job in Riverside, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.


 
Job Number: 312596
Job Location: Riverside, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Network Engineer

Description:
Inconen is looking for a Sr. Network Engineer for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **
** This is a 3-month temp-to-hire role or possibly straight to direct **
** Preferred location is Huntsville. Can also be located in Canoga Park, CA (L.A.) or Jupiter, FL. Please specify location availability on the resume **
** Looking for VERY senior candidates **

Duties:
50% - Provide technical hardware and software support for Classified Enterprise WAN environment to include configuration, racking, cabling for Cisco Switches, Palo Alto Firewalls, Routers, Cisco Jabber, and Cisco Call Manager and other teleconferencing capabilities. Includes IP Phone configurations.
20% - Address service request and incident tickets submitted by the user population requesting new access or break/fix activities to support the user community
20% - Apply System Technical Implementation Guidelines (STIGs) to systems, apply compliance and hardening updates and represent the company during audit activities to help maintain accreditation and authorization to operate
10% - Support projects and help support Linux and Networking environments.

Skills:
-Experience with AF Data and Voice Networks—to include management and maintenance
-Shall have knowledge of the General Dynamics TACLANE line of Network Encryptors (INE).
-Knowledge of procedures to load various cryptographic equipment including: TACLANE, FASTLANE, vIPER, STE, KIV-7, and KG-84.
-Knowledge of COMSEC electronic key management systems and local site key management policies.
-Microsoft Active Directory knowledge.
-Provide Tier 2 network support for a complex enterprise WAN and LAN network.
-Detailed knowledge of audio and video (A/V) concepts (i.e. how to set up and cable a room for VTC, where to put microphones to prevent feedback or audio issues, lighting, video, etc.).
-Analyzes/maintains/administers LAN/WAN systems, including planning, designing, evaluating, selecting, and upgrading operating systems and protocol suites and configuring communication media with concentrators, bridges, and other devices.
-Resolves interoperability problems to obtain operations across all platforms, including email, file transfer, multimedia, teleconferencing, etc.
-Plans network layout design.
-Requires an in-depth knowledge of LAN/WAN communications, network hardware such as Cisco routers, Ethernet switches, bridges, gateways, firewalls, and encryption devices (i.e., Micro and Gig E Taclanes).
-The engineer shall also have an in-depth knowledge of routing protocol such as RIP, EIGRP, BGP, and OSPF.
-Palo Alto Firewall configuration experience
-Demonstrates a strong understanding and practical experience with technologies such as MPLS, VPLS, VPNs, and traffic engineering.
-Also, desirable to have thorough knowledge of the principles, methods, and techniques used in managing help desk, network troubleshooting, and support, as well as active directory enterprise, network management software and tool suites (i.e., MS SharePoint, NetIQ, Nagios & MRTG). Knowledge of or certification in one or more specific applications or processes may be required, depending on job assignment. In addition, requires competence in systems analysis and technical writing to support SOPs.
-Designing architecture to include the software, hardware and communications to support the total requirements
-Ensuring that the network/transport layers of the common operating environment are compliant.
-Evaluating analytically and systematically problems of work flows and network usage, organization and planning and develops appropriate corrective action.
-Expert knowledge of TCP/IP protocols (emphasis on Multicast) and Doman Name Systems (DNS).
-Expert knowledge of network architectures and associated equipment including, but not limited to zones, screening devices, and typical design.
-Systems Expert on email delivery, specifically including all aspects of POP3 and SMTP.
-Familiarity with direct attached and network attached storage devices, protocols and techniques to include iSCSI.
-Understanding of Virtual Machines (VM) and knowledge of VM configurations.
-Demonstrated ability to interface with remote users via chat, telephone, instant messaging and email to assist in troubleshooting.
-Strong knowledge of hardening systems, running SCAP tools and implementing STIGs on systems
-Ability to address audit requirements
-Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
-Strong documentation skills and ability to document and diagram solutions using tools like MS Visio

Education:
-Desire a Bachelor’s in Computer Science or a related technology field and at least 6 years of experience in network and server infrastructure or an equivalent combination of education and experience.
 
Job Number: 15350
Job Location: Huntsville, AL
Rate: $60.00 - $67.19/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer - IMA Platform

Description:
ABOUT THE JOB:
This position is responsible for development and test of an integrated modular avionics (IMA) platform.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* 7+ years aerospace system engineering experience
* System design experience using ARP4754A guidelines
* Experience with Integrated Modular Avionics (IMA)
* Experience with system verification testing
* Experience updating system requirement from problem reports
* Experience with coverage analysis of system requirements to hardware, software and test requirements
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

HIGHLY PREFERRED SKILLS:
* Experience with ARINC 664, Part 7 - Avionics Full-Duplex Switched Ethernet (AFDX)
* Experience with system certification to Design Assurance Level (DAL) A or DAL B.

PREFERRED SKILLS:
* Experience with DO-178
* Experience with DO-254
* Experience with IMA General Processing Modules (GPM)
* Experience with ARINC 429 and CAN 825 I/O

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12 months
Start Date: ASAP
Input Date: 08/09/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Administrator - REMOTE / Clearance a plus

Description:
Candidate must have the ability to pass a National Agency Clearance with Inquiries (NACI) screening.

U.S. Citizen Required:
Yes Remote: (Most work can be done from home, but some days will require being on-site to interact with the hardware.

• The main function is to support and maintain Software and Hardware used on the program.

Collaborative Team environment in an agile setting under the Scaled Agile Framework (SAFe

Install new / rebuild existing physical and virtual servers and configure hardware, peripherals, services, settings, directories, storage, etc. in accordance with standards and project/operational requirements
• Develop and maintain installation, configuration and security procedures.
• Perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, systems and key processes, monitor Nagios and update monitors as needed.
• Perform daily backup operations, ensuring all required file systems and system data are successfully backed up. Verify completion of scheduled backup jobs to local storage and replication to remote storage.
• Repair and recover from hardware or software failures. Coordinate and communicate with impacted end user communities.
• Apply OS/application patches and upgrades on a regular basis, and upgrade administrative tools and utilities. Configure / add new services as necessary.
• Perform ongoing performance, system and application tuning, hardware upgrades, and resource optimization as required. Configure CPU, memory, and disk partitions as required.
• Monitor virtual computing environment, servers, virtual machines, data stores, networks. Perform application and firmware updates as required.
 
Job Number: MD9642
Rate: 50/60
Per Diem: NO
Input Date: 03/31/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic @ 774-210-4106
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV (Secret Clearance)

Description:
Inconen is looking for a Systems Engineer IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Hardware Systems role, NOT Software or Electrical systems **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace)
-Advanced degree desirable. Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.
 
Job Number: 15530
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/12/2021
Last Updated: 08/12/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Engine Control Requirements Development

Description:
This position is responsible for developing system requirements for a new aircraft turbine propulsion control system. Technical Lead experience is a PLUS.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* Aerospace propulsion engine controls product experience
* System Requirements Development experience including allocation of requirements to software and hardware
* System Development Process knowledge
* Model-based Software Development Process knowledge
* Hardware Development Process knowledge
* System Change Request (SCR) Process experience
* Certification Guidelines knowledge: ARP-4754, DO-331, DO-178, DO-254
* DOORs proficiency
* Effective Communication Skills (both verbal and written)
* Self-motivated, Accountable, Detail-oriented

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 07/30/2021
Last Updated: 08/06/2021
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer III

Description:
A Systems Safety Engineer III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, architecting, modeling, simulating, testing, certifying and improving cutting edge products and services. To be considered for this role, you will have a Bachelor's degree in Systems Engineering or a related discipline and typically 3 years or more of relevant experience.

Systems Safety Engineer III Job duties:

* Research, architect, model, simulate, test, certify and improve cutting edge products and services.
* Work closely with design partners, developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools.
* In charge of system-level ownership of new system safety or reliability products and processes through the product lifecycle.

Qualifications:

* Knowledge of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.
* Experience in developing Failure Modes and Effects Analysis as well as Reliability Analysis products.
* Experience in or knowledge of System Safety Engineering analysis and products, including but not limited to fault tree analysis, hazard analysis, computer based control system (CBCS) analysis, must work and must not work function analysis, etc.
* Experience with software/hardware integration, including avionics and electrical distribution systems.

Pay Range: $37/hr to $50.87/hr

If you are interested in this Systems Safety Engineer III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314379
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/17/2021
Last Updated: 11/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TCAS System Test Engineer

Description:
REAL TIME CONSULTING (An RTCo Company)—POSITION DESCRIPTION
JOB TITLE: TCAS System Test Engineer

ABOUT THE JOB:
This position is responsible for system test activities for an Aircraft Collision Avoidance System (ACAS) in accordance with ARP4754A systems and DO-178B software development cycle.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Knowledge of ARP4754A systems development cycle
• Familiarity with DO-178B software development cycle
• Experience with DOORS for test case capture and management
• Experience developing system level tests for a VALFAC (validation facility) environment including
o Authoring new test scripts
o Updating test scripts
o Running tests
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• Familiarity with Aircraft Collision Avoidance Systems
• TCAS product experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 4 months
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Illustrator

Description:
Inconen is looking for a Technical Illustrator for our client, a well-known Aerospace Company, in Camden, AR.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
-Performs a broad array of Technical Illustration, editing and layouts in support of software configuration for work instruction creation on the Delmia Velocity product for Camden.
-Support team of engineers, technicians, inspectors and other technical experts to create product assembly instructions.
-From rough drafts or existing text supplied by Manufacturing Engineers (MEs), condense written process instructions into the simplest possible terms to provide a concise, easily understood series of steps needed to create a product.
-Working from engineering drawings, existing 3D CAD files, photographs or videos, sketches, written and sometimes verbal descriptions, use graphics software to create technical illustrations that accurately depict key events and changes to the product that occur during product build.
-Use standardized icons, symbols, notes and other elements to indicate key process and quality controls, safety requirements, and environmental safeguards needed during product build.
-Using publishing software, assemble text, illustrations, and other graphic elements into a finished set of assembly instruction conforming to company standards.

Skills:
Required:
-Experience creating and editing Visual Planning, Technical written work instructions.
-Experience in Delmia R15 or other version of same software.

Desired:
-Possession of a valid driver’s license.

Education:
-Bachelor of Science or equivalent combination of education and experience.
-5+ years of related experience.
 
Job Number: 15405
Job Location: Camden, AR
Rate: $45.00 - $48.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 Mos
Start Date: ASAP
Input Date: 07/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Illustrator

Description:
Inconen is looking for a Technical Illustrator for our client, a well-known Aerospace Company, in Camden, AR.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
-Performs a broad array of Technical Illustration, editing and layouts in support of software configuration for work instruction creation on the Delmia Velocity product for Camden.
-Support team of engineers, technicians, inspectors and other technical experts to create product assembly instructions.
-From rough drafts or existing text supplied by Manufacturing Engineers (MEs), condense written process instructions into the simplest possible terms to provide a concise, easily understood series of steps needed to create a product.
-Working from engineering drawings, existing 3D CAD files, photographs or videos, sketches, written and sometimes verbal descriptions, use graphics software to create technical illustrations that accurately depict key events and changes to the product that occur during product build.
-Use standardized icons, symbols, notes and other elements to indicate key process and quality controls, safety requirements, and environmental safeguards needed during product build.
-Using publishing software, assemble text, illustrations, and other graphic elements into a finished set of assembly instruction conforming to company standards.

Skills:
Required:
-Experience creating and editing Visual Planning, Technical written work instructions.
-Experience in Delmia R15 or other version of same software.

Desired:
-Possession of a valid driver’s license.

Education:
-Bachelor of Science or equivalent combination of education and experience.
-5+ years of related experience.
 
Job Number: 15605
Job Location: Camden, AR
Rate: $45.00 - $48.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 07/21/2021
Last Updated: 07/22/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Developer/Test Engineer to design, review and modify Test Programs. This effort includes: Design and or Redesigning current test adapters and designing, reviewing and modifying test software, integrating said test adapters with common core test sets, creating validation procedures and certifying ITAs for DVT, CQT, and production phases.
Must exhibit experience working in an engineering development environment to support the Program with moderate to complex CCAs with analog, digital and FPGA components. This will require attention to noise and grounding and communication at high speed data rates.
 
Job Number: 3221
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 07/21/2021
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Inspector Sr.

Description:
Inconen is looking for a Tooling Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Education and Experience Requirements:
High school diploma/GED. Valid Driver’s License required. Must be proficient in blueprint reading/interpretation, shop math, and quality control manual as required. Eight (8) years technically related experience to include at least six (6) years related inspection experience.

Other Requirements: 1. Ability to import and export inspection data in many different formats (Word, Excel, PDF, etc.). 2. Model Base systems (Cadam, Catia V4, Catia V5) experience preferred. 3. Must be proficient in use of inspection tools and equipment. 4. Must be proficient in use of conventional optical measurement equipment. 5. Must be competent with theodolite and laser tracker systems. 6. Ability to recognize potential problems with drawings and elevate to management. 7. Must be competent with coordinate measurement machines (CMM). 8. Must be competent with electronic tool record keeping system. 9. Must be able to lift up to 40 pounds & pass the vision test as required by area job responsibilities. 10. Must have good communication skills.

Position Purpose:
Under limited supervision, performs inspection duties and assists other tooling inspectors in general and technical aspects of Quality Control in a specified area of tooling inspection.

Principal Duties and Responsibilities:
Essential Functions: 1. Prepares inspection documentation and maintains files as required. Ensures current engineering revisions are incorporated per established procedures. 2. Performs periodic inspections to ensure compliance per FAA requirements and approved quality procedures. 3. Creates Model Base inspection processes using CATIA model-based tool designs that can be used for both fabrication and rework of tools by the tool shop personnel. 4. Analyzes data using Metrologic inspection software and create electronic quality folders in SmarTeam to store inspection data for all model-based tooling. 5. Promotes and maintains quality standards and processes. 6. Works with tooling suppliers to ensure the inspection data is correct and in the proper format on all incoming tools. 7. Makes recommendations to Tooling Management on continuous improvements in the tooling inspection area. 8. Ensures proper use and storage of area tools, equipment and supplies. Advises management of any associated problems or other requirements.

Additional Functions: 1. Assists other inspectors as required. 2. Performs other duties as assigned.
 
Job Number: 15134
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Vehicle Dynamics Engineer

Description:
Responsibilities include creating and improving systems application of tools & methods. Research, analyze and implement on-track performance gains in racing car configurations, using predictive simulation technologies. Develop simulation tools & methodologies.

Requirements include: Degree in Mechanical Engineering or Mathematics or equivalent years of experience in automotive or racing industry. 5 years of configuration, operation, and validation of vehicle dynamics software (steady-state lap simulation, dynamic parametric models, multi-body simulations, etc.). Experience with vehicle test rigs: 7-post testing, kinematics & compliance rig, etc. Processing and analysis of time-series data in time, frequency, and spatial domains (visualization, signal processing). Practical Experience with racing car set-up problems and methodologies. Must have professional race team experience.
 
Job Number: 81650
Job Location: Brownsburg, IN
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 06/11/2021
Last Updated: 07/20/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Mark Johnston
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Web and Media Programmer

Description:
Experience with requirements development, navigation, and content strategy
Proficiency with fundamental front-end languages: HTML, CSS, and JavaScript
Proficiency with JavaScript frameworks: React, jQuery, Bootstrap, media queries
Proficiency with technology platforms and content management systems: AEM, Unily, and WordPress
Knowledge in building effective and intuitive website applications with functional databases
Proficiency in developing responsive mobile design
Experience in consuming application programming interfaces (APIs)
Experience in GitLab or version control
Proficiency with design and workflow collaboration software
Familiarity UI/UX and proficiency with wireframe development
 
Job Number: CJH-M-3158
Job Location: Orlando, FL
Rate: $35
Per Diem: Yes
Overtime: Yes
Duration: 12
Start Date: 7/26/2021
Input Date: 07/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

Back to Advanced Job Search