Job Search Results

156 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2025/07/06 Sunday 04:07PM Pacific Time by ContractJobHunter. )

Listings 1 - 156
Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Electrical Engineers Needed

Description:
2 openings for Electrical Engineers to support an A321 passenger to freighter conversion / Dragon program.

They will be onsite in Wichita, KS. Period of performance is ~5 months each assuming a start in the next few weeks. We can accommodate a wide variety of skills, but they will need to have some experience with Airbus doing electrical Wire Diagrams, Wire routing, and potentially some experience doing electrical based reports supporting certification. Primary CAD package they will use is AutoCad. Someone with 5 years’ experience or greater is acceptable.


The Structures Company LLC is an AA/EOE.
 
Job Number: 512
Job Location: Wichita, KS
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: No
Duration: 5+ Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Candidate will work within the thermodynamics team on LM Aero programs. The thermodynamics team executes engineering tasks across all LM Aero lines of business. Candidate will be responsible for providing technical analysis for complex problems involving heat transfer and thermodynamics, mentoring junior team members in thermal analysis and thermodynamics tools and best practices, implementing standard work practices, and tailoring processes to program needs.

Candidate will develop and analyze complex thermal management system architectures (Environmental Control Systems (ECS), and/or Power and Thermal Management Systems (PTMS)) and structural temperatures for next generation air vehicle platforms. Experience in thermal structural modelling and analysis of complex structures required. Responsibilities include modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools, and summarizing work and presenting to internal and external customers.

Strong experience with common thermal analysis tool sets with ability to develop tools for analysis automation and optimization are desired. Experience with Matlab/Simulink, high-level programming language(s) (C, C++, Fortran, Python, etc.), and advanced engineering analysis and CAD packages is highly desirable.

Must be self-motivated with a strong work ethic, communication and presentation, time management, and interpersonal skills able to work in a fast-paced, dynamic environment.
Thermal analysis experience required
Must have experience in at least one of the following: C, C++, or Fortran
Bachelors degree or Equivalent relevant experience required
Experience in Heat transfer and thermo dynamic analysis required
Experience with Thermal analysis tools required

Sinda experience preferred
 
Job Number: CJH - 6843-1
Job Location: Fort Worth, T X
Rate: 95
Per Diem: Split
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Candidate will work within the thermodynamics team on LM Aero programs. The thermodynamics team executes engineering tasks across all LM Aero lines of business. Candidate will be responsible for providing technical analysis for complex problems involving heat transfer and thermodynamics, mentoring junior team members in thermal analysis and thermodynamics tools and best practices, implementing standard work practices, and tailoring processes to program needs.



Candidate will develop and analyze complex thermal management system architectures (Environmental Control Systems (ECS), and/or Power and Thermal Management Systems (PTMS)) and structural temperatures for next generation air vehicle platforms. Experience in thermal structural modelling and analysis of complex structures required. Responsibilities include modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools, and summarizing work and presenting to internal and external customers.



Strong experience with common thermal analysis tool sets with ability to develop tools for analysis automation and optimization are desired. Experience with Matlab/Simulink, high-level programming language(s) (C, C++, Fortran, Python, etc.), and advanced engineering analysis and CAD packages is highly desirable.



Must be self-motivated with a strong work ethic, communication and presentation, time management, and interpersonal skills able to work in a fast-paced, dynamic environment.



Comments:

Thermal analysis experience required

Must have experience in at least one of the following: C, C++, or Fortran

Bachelors degree or Equivalent relevant experience required

Experience in Heat transfer and thermo dynamic analysis required

Experience with Thermal analysis tools required



Sinda experience preferred

***Must have Secret Clearance***

***Must have covid vaccination card needed for this position**
 
Job Number: CJH - 7295-1
Job Location: Fort Worth, T X
Rate: 95
Per Diem: Split
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mod Designers-Structures-SolidWorks-OK area

Description:
Our client is involved in the modification of aircraft structures & interiors with ongoing projects is seeking an experienced design engineer for their operations in Kansas
Experience with previous aircraft freighter conversion design work preferred or experience with aircraft primary structures design such as fuselage, cargo door, wing or interiors such as LOPA, Galleys, etc. Proficiency with Solidworks is preferred.

The Lead Structural Engineer will provide leadership and technical direction to the structures team in the design and certification of a modified business jet airframe

Job Roles & Responsibilities

Manage a team of Drafters, Designers, Stress Analysts and Aerodynamic Engineers working to produce updated external and internal loads to inform the reinforcement of the business jet airframe.
Provide program and technical direction to team by assigning tasks from conceptual design through completion of project.
Review designs, drawings, and reports for accuracy and completeness to ensure design meets company and FAA part 25 certification requirements.
Support development of test plans and participate in structural testing of the airframe.
Support manufacturing team and suppliers throughout fabrication and assembly of aircraft.
Coordinate Engineering Change Order process supporting cost, weight, and manufacturing improvements.
Work with Stress, Dynamics, Mass Properties, Aerodynamic, and Certification Engineers to provide airworthiness or certification assessments of the aircraft design.
Required Qualifications:

Minimum of 4-5 years of experience managing aircraft program engineering teams

Ability to effectively communicate and coordinate with program management, customers, company functions, and the engineering team to achieve program goals
Ability to effectively plan, assign, and status tasking for the engineering team
Experience with airframe modifications
Experience with aircraft weight, balance, and loading
Experience with FAA airworthiness standards and documentation
Experience with modified aircraft flight testing
Demonstrated experience in aircraft structural design and analysis including static, fatigue, and damage tolerance
Experience in Special Mission Aircraft modification and Aircraft Sensor Integration programs with a focus in aircraft structures

Responsibilities include the design, development, qualification, and documentation of technical data packages, which are used for modification programs. Additionally, provide engineering support for existing manufactured product through investigation, problem resolution, ECN/EO and drawing revision documentation.

If interested, please send your updated resume in Word doc format to Kevin at engineer@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly

Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada and Europe. We have been in business 20 years in the US and 8 years in Europe.
 
Job Number: KD-0319
Job Location: OK, OK
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: KELTIA DESIGN INC
Attention: Kevin
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer

Description:
An Airframe Design Engineer job in Palo Alto, CA is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for creating designs that are cost effective and easy to fabricate for a part 23 aircraft while utilizing NX design software. To be considered for this role, you will have a B.S. Degree in Engineering along with 5+ years of experience with lightweight structures

Airframe Design Engineer Job Responsibilities:
* Perform trade studies, requirements derivation, and establish the overall vehicle configuration based on requirements
* Apply understanding of loads paths, design best practices, and hand calcs to design robust structural configurations
* Apply design for manufacturing concepts to create designs that are cost effective and easy to fabricate. Preferred experience with composite sandwich construction and adhesive paste bonding
* Develop company standards for composite and metallic part CAD models and drawings
* Work closely with and mentor other engineers on the design, stress and M&P teams
* Provide technical guidance on design concepts (risk vs. cost vs. performance)
* Support manufacturing to validate and verify that designs meet requirements and specifications

Airframe Design Engineer Job Requirements:
* B.S. Degree in Engineering
* 5+ years of experience with lightweight structures
* Experience with the design of large bonded structures, sandwich construction, hand laid prepreg carbon fiber or machined metal
* Ability to design and analyze simple components
* An understanding of load paths and laminate design fundamentals
* Strong CAD skills in NX (preferred), Solidworks, Catia or Creo
* Familiarity with PDM systems
* Experience with the manufacturing of composite parts
* Experience with analyzing and dispositioning non-conformances
* Knowledge of FAA aircraft certification requirements for Part 23 aircraft
* Self-starter, team player, and desire to work in a fast-paced environment

If you are interested in this Airframe Design Engineer job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 317668
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Architect Technician – North of Everett, WA - Direct Position-0804

Description:
Our client north of Everett, WA area is looking for an Architect Technician to support their expanding business.

Ideal candidates will have experience working in an architecture firm, have experience with SketchUp Pro
•1-4 years of experience in multi-dimensional architecture office desired.
•B. Arch (or equivalent) accredited degree or relevant professional experience
•Working knowledge of SketchUp and Layout is preferable
•Working knowledge in AutoCad, Adobe Suites, MS Office, are helpful
•Great attitude, highly motivated, detail oriented, with good verbal communication.
•Self-starter, team player, that doesn't require extra supervision.
•To be punctual, reliable and have dependable transportation.
Duties Include (but not limited to):
•Modeling; Drafting with SketchUp and Layout.
•3D modeling, plans, elevations, sections, details.
•Project site visits for As-builts, photo's, and Construction Observation.
•Structural drawings, foundation, framing and details.
•Sketch-Up 3D modeling & Layout Working Drawings.
•Adobe Suites -- rendering, proposals, website, etc.
•MS Office Suite -- Word, Excel, Power Point, Publisher, etc.
•Some client, contractor and permitting interaction.
•Basic understanding of ACAD and/or Revit.
Possible Benefits Include:
•After 90 Days - Health Contribution, Eligible for Family/Sick Leave.
•After 1 Year - 401k Plan, up to a 10% performance bonus.
•After 2 years - additional performance bonuses
Job Type:
Full-time.
Benefits:
•401(k).
•Health Insurance.
•Paid Time Off.
Experience:
•Architecture: 3 years (Required)
•Construction: 1 year (Preferred)
•Sketch Up: 1 year (Preferred)
Education:
•Associate (Preferred)

If interested, please send your updated resume in Word doc format to Kiersten at cad4@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly

Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada and Europe. We have been in business 20 years in the US and 8 years in Europe.
 
Job Number: KD-0804
Job Location: WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: KELTIA DESIGN INC
Attention: Kiersten
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Wire Harness Design - Mentor Graphics

Description:
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704

TSC is an AA/EOE.
 
Job Location: Manassas, VA
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Creo Cable and Harness Design Engineers-REMOTE

Description:
Seeking Avionics Creo Cable and Harness Design Engineers-REMOTE
Design of electrical harnesses for power distribution, RF, communication and high-speed data signal
Selection of harness components and hardware, connectors, backshells, cable and wire
Understanding and application of EMI/RFI and harness shielding
Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
Design and integration of harness support brackets
Support design configuration development and trade studies
Provide technical guidance for hardware installation
Support the assembly and testing of cables and harnesses
Report on activity schedule and technical status
Identify opportunities for technical improvements
=====
B.S. degree or higher in Mechanical or an appropriate engineering field
5+ years of experience designing Wire Harnesses for the Aerospace industry
Experience with Creo and Windchill and Routed System Designer (RSD)
Understanding and application of wire derating analysis
Familiar with existing applicable harness standards: IPC/WHMA-A-620A, NASA-STD-8739.4
Strong electrical/mechanical design and integration skills using 3-D CAD software
Must be a U.S. citizen or national, U.S. permanent resident
=======
If qualified, email a WORD version copy of your resume along with your hourly pay rate and then call Peggy at 774-210-4108 to discuss. Referrals appreciated!
 
Job Number: PL Creo Cable Harness
Job Location: REMOTE, REMOTE
Rate: 60-80/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 06/10/2025
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Avionics Manufacturing Engineer

Description:
An MRB Avionics Engineer job is currently available at Belcan. This is contract opportunity with benefits in Tehachapi, CA. To be considered for this role, you will need a Bachelor's degree and at least 3 years of engineering experience or an equivalent degree and experience combination.

MRB Avionics Engineer job duties:
Requirements
* B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
* At least 5 years of relevant industry experience
* Understanding of MRB requirements & procedures
* Provide avionics production support and drawing redlines
* Engineer to provide support to technicians on harness assembly, harness installation, and harness terminations on-ship. Provide guidance and redlines if required.
* Experience with wire harness design and install drawings is a plus.
* Experience with flight test instrumentation (strain gauges specifically) is a plus.
* Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
* Working knowledge and experience integrating various mechanical systems into a composite aircraft.
* Review and provide final engineering technical disposition of non-conformance notifications
* Participate in product Corrective Action Board (CAR) reviews
* Willingness to support weekend shift operations


Responsibilities
* Inspect avionics production work such as wire harness assembly and instrumentation
* Performs other duties as assigned
* May require 2nd, 3rd, or 4th shift work



 
Job Number: 317672
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Operator & Programmer

Description:
Introduction


Visium Resources has been asked to identify qualified candidates for this CNC Operator / Programmer position.

This position is a direct hire opportunity which is to be on-site in Orlando, FL.


Summary


The CNC Operator & Programmer position will have an opportunity to work with state-of-the-art equipment in machining and product design.

We are looking for an experienced machinist to assist our R&D engineers by programming and operating machinery including mills, lathes, and wire EDMs to produce components to specifications. The successful candidate will be accountable for in-process production quality assurance and leading troubleshooting efforts. We prize lifelong learning and expect our new machinist to bring machining experience of immediate value to the business while also being open to learning new skills while on the job.


While typical shop hours are from 8am to 5pm, this job will require rotating shift work when workload increases. Shiftwork is likely to be from 3pm-11pm during these times.

Programming, setting up, and operating 5-axis simultaneous CNC milling machines and other machining equipment involving precision tolerances(tenths).
Ability to generate CAM for machining parts. Expectation is to go from part file (3D Model) to finished part (CAM/Conversational).
Experience working in a R&D/Job Shop. Able to see the big picture and balance labor time vs. machine time.
Reading blueprints and understanding GD&T to ensure parts are produced according to required tolerances and specifications.
Selecting and applying proper tooling.
Responsible for verification and documentation of part dimensions and tolerances as required for quality.
Prototyping and creating models and early samples of products built to test concepts and processes.
Required to visually inspect parts for surface details and machining finishes with close attention to detail.
Knowledge of general shop math.
Providing consultation and training on CNC machine abilities and techniques.
Responsible for keeping equipment and work area clean and orderly.
Provide general upkeep and preventative maintenance on machines and other tools.
Ability to work safely and adhere to company policies and procedures.
Perform other duties assigned by the Engineering teams.

Qualified candidates would have the following:

US Citizen or Approved to work in the U.S.
Strong 5-axis simultaneous milling programming skills required. Minimum 8 years' of experience working with CNC Mills (Okuma MU5000V is a plus).
Experience with exotic materials; Nickel based alloys.
Intermediate understanding of part modeling and strong knowledge of fixture design.
Experience working with Siemens NX CAD/CAM software is a plus.
Prototyping experience is a plus.
MUST HAVE knowledge of programming and use of G&M codes.
MUST HAVE the ability to read and interpret blueprints.
Ability to use applicable inspection/measurement equipment: micrometers, calipers etc. as required.
Good communication skills and the desire to work in a team environment is a must.
Exhibit close attention to detail.
Show a strong initiative to succeed.
Qualify for fitness of duty on all work sites including, but not necessarily limited to, passing both drug tests and background checks.
Additional Physical Requirements:

Have full body mobility and be able to twist, turn, bend at the waist, squat and go up and down stairs.
Able to lift heavy objects up to 50lbs.
Able to work on feet for extended periods of time.
Able to walk and move about the Center to work with team members.
Able to use hands to finger, handle, or feel; reach with hands and arms; talk and hear.
Job duties frequently require the employee to climb or balance and stoop, kneel, crouch or crawl.
The vision requirements include; close vision, distance vision, color vision and peripheral vision






________________________________________________________________________________________________


Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.

Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
 
Job Number: 9488
Job Location: Orlando, FL
Rate: Open
Overtime: Poss
Duration: 3 Mos - Direct
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: VISIUM RESOURCES
Attention: David Story
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1

Description:
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1
12 month contract

Pay rate: $55-60/hr W2

Analog / Mixed-signal Circuit Design Engineer

Electrical engineer to design board level electronic circuits and equipment for aerospace avionics.
Requirements:
-BSEE and 5 years, or MSEE and 3 years of mixed signal circuit design experience.
-Proficiency with simulation, Pspice and Cadence Schematic Capture.
-Proficiency in hardware troubleshooting / software debugging.
-Physical testing experience including proficiency with lab measurement equipment (oscilloscope, logic analyzer, etc).
-Ability to clearly communicate complex technical concepts verbally and in written form.
Position includes generation of design documents, specifications, user's manuals, test plans, analyses, etc.
 
Job Number: 4016-1
Job Location: Chandler, AZ
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: TALENTPRO CONSULTING
Attention: Angelia
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer

Description:
A Composite Design Engineer role located in Salt Lake City, Utah is currently available through Belcan. The Composite Design Engineer will design and validate aerospace structures, assemblies, and mechanical systems, primarily using advanced composite materials, metallics and engineered plastics. You will work cooperatively with operations to optimize the design for quality, cost, and throughput, and communicate the design and validation through CAD models, drawings, test plans, test reports and maintenance manuals.

Composite Design Engineer job duties:

* Produces innovative and intelligent designs of structures, assemblies and mechanical systems
using design specifications or department/customer guidelines and requirements. Typical
structures will be designed from advanced composite materials, engineered plastics, machined,
and welded metals.
* Specify materials, process, and parts in consideration of product certification.
* Works cooperatively with operations, manufacturing engineering, tooling engineering and
suppliers to optimize ease of manufacturing, cost, weight, and quality.
* Creates accurate 3D models/drawings and engineering data required to communicate designs to
manufacturing, suppliers and the customer.
* Creates and validates the engineering bill of material (EBOM) and maintains the design data in a
PDM system.
* Prepares engineering change notices to support manufacturing, customers, and certification.
* Recommends and plans testing to validate engineering results.
* Works with supply chain for availability, cost, and lead times for purchased parts.
* Actively participates in initial production to prevent and/or solve any engineering issues.
* Applies theoretical knowledge and engineering techniques to solve complex engineering
problems. Analyze root cause and recommend corrective actions.
* Prepares technical content for maintenance manuals and recommended spares provisioning for
airline customers.
* Point of contact for customer technical issues.

EDUCATION AND EXPERIENCE REQUIRED

* BS/BA in Degree in Mechanical Engineering, Aerospace Engineering or Equivalent (AE/CE/IE)
* Basic technical skills, theories and concepts related to the design and development of high-
performance composites structures and other mechanical systems.
* Application of CAD tools to design of composites. CATIA Composites Design (CPD) preferred.
(SOLIDWORKS and 2D AutoCAD a plus).
* Prefer Enovia LCA and Wind-chill PDM experience.
* Working knowledge of other related disciplines such as GD&T, tooling, machining, and other
composite processes.
* Experience in 3D model-based definition (CATIA FT&A preferred).
* Experience in product testing and qualification (Mechanical, environmental, system and
subscale/prototype test and development)
* Experience in material testing primarily for composites and bonded joints (ASTM/ISO)
* Experience in FAA regulations and Airline Maintenance Manuals
* Demonstrated history of creative problem solving in a team environment
* Willingness to perform 'hands-on' work in a dynamic setting
* Ability to work to provided schedules and deadlines
* Customer and operations focused
* Results driven with attention to detail.
* Good written and oral communication
* Self-motivated and engaged learner

If you are interested in this Composite Design Engineer role located in Salt Lake City, Utah please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 317561
Job Location: Salt Lake City, UT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer(Composites Structural Design)

Description:
An MRB Composites Structural Design Engineer jobs are currently available through Belcan in Bear Valley Springs, CA. These are contractor positions planned for a duration of 6 months with the potential to extend. Great matching candidates will have 5-20 years+ of Aircraft Design Experience and a BS Degree in Engineering or related field. You will be responsible for collaborating with the engineering and manufacturing teams to accurately define mechanical requirements, systems interfaces, and produce manufacturing drawings.

MRB Composite Structural Design Engineer job duties:
* Provide technical expertise in the definition, design, and manufacturing of composite structures
* Collaborate with other disciplines to assure efficient, accurate, producible design results
* Effectively communicate across disciplines and coordinate the implementation of design constraints to achieve an optimal design
* Quickly and accurately communicate risks, technical/schedule/cost, and risk avoidance opportunities using appropriate program procedures
* Exhibit respectful and effective communication skills appropriate to a service provider-based atmosphere
* Provide general build support including assisting in the evaluation of non-conforming hardware

Qualifications:
* B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
* At least 5 years of relevant industry experience
* Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
* Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
* Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
* Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
* Knowledge and experience with AS9100 a plus
* Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
* Experience with manufacturing based ERP systems a plus
* Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
* Strong team player and ability to work independently with excellent organizational and problem-solving skills
* Composite and metal design experience preferred
* Understanding of MRB requirements & procedures
* Extensive working knowledge of engineering drawings / requirements
* NDT/Visual non-conformance disposition expertise
* Experience with control & segregation requirements for non-conforming material
* Familiarization with records accuracy & completeness (including data codes)
* Ability to facilitate inadequate cause & corrective action resolutions
* Familiarization with rework vs accept disposition risk assessments
* Familiarization with final dispositions & re-submit codes
* Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage)
* Experience should be in a production and/or schedule-driven environment
* Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
* Strong written/verbal communication and interpersonal skills
* Typically a 9 hour work day, with some scheduled weekend support required


If you are interested in this Composites Structural Design Engineer job please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!


 
Job Number: 317404
Job Location: Bear Valley Springs, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Tucson, AZ is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for developing engineering designs of components, assemblies, subassemblies, and subsystems. To be considered for this role, you will have a B.S. Degree in Engineering along with 2 - 5 years with system and/or hardware design and analysis experience.

Design Engineer Job Responsibilities:
* Independently develop engineering designs of components, assemblies, subassemblies, and subsystems
* Independently generate production drawings of components, assemblies, subassemblies, and subsystems
* Interface with internal customers (Design Leads, IPT Leads and Project Managers) to present technical results and/or convey challenges that must be overcome

Design Engineer Job Requirements:
* B.S. Degree in Engineering
* 2 - 5 years with system and/or hardware design and analysis experience
* Experience in one or more of the following discipline areas: Life Support System Design, Crew Systems Design, Crew Cabin Design, Mechanical Design, or Thermal Control System Design
* Knowledge of, and skills in, SOLIDWORKS CAD software to generate CAD models and production drawings per company drawing standards
* Proficiency in the understanding and use of GD&T per ASME Y14.5
* Knowledge of, and skills in, Product Data Management tools (SOLIDWORKS PDM preferred)
* Ability to conceptualize design solutions and generate CAD renderings given a limited set of requirements
* Skills in Microsoft Office applications (Excel, Word, Outlook, PowerPoint)
* Knowledge and experience with design and development of spacecraft, spacesuits, aircraft, military, or other relevant vehicles, systems, subsystems, assemblies, and/or components
* Ideally, but not required, knowledge and experience in at least one of the following discipline areas: Environmental Control and Life support Systems, Thermal Control Systems, Crew Systems, Cabin Design, Mechanical Design, Mechanical Analysis, or Thermal Analysis
* Knowledge and experience on the engineering product lifecycle, ranging from requirements development through design, manufacture, test, and operations

If you are interested in this Design Engineer job in Tucson, AZ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314854
Job Location: Tucson, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Design Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Our client mandates that all employees and contractors must be fully vaccinated for COVID-19 **
** Secret Clearance not required but preferred **
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate's resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred **
** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using Pro-E/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineer's research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Additional Skills:
-Target mechanical experience
-CREO 5 (working level experience)
-Windchill Product Lifecyle Management (PLM) experience
-Pressurized fluid systems (gas and liquid)
-High pressure systems 10,000 psi gaseous and 2000 liquid
-Machined hardware (subtractive manufacturing)
-Additive manufacturing (some…may 10%)
-Component design
-Hardware integration
-Joining methods - Welding, bolted joints, mechanical fittings
-Stainless steel tubing for fluid routing - bent tubing, orbital welding, mechanical end connections, ¼' to ¾' diameter, .027 to .035 wall thickness
-Integration - thrusters, valves (often times supplier parts), pyro valve, regulators, orifices, ancillary hardware such as machined custom brackets to off the shelf p-clamps.
-Materials - 300 series SS, Inconel, Aluminum, Titanium
-Material compatibility considerations to Hydrazine and N2O4. Helium, Nitrogen, Argon
-Experience working with integrated product teams
-Experience working with analysis teams to evaluate structural margins (to include CAD model preparation for meshing)
-Geometric Dimensioning and Tolerance Specification knowledge and practical application to include tolerance stackups
-Mechanical part selection (picking out bolts, washers, o-ring, Teflon seals, p-clamps, etc.) and preparing the geometry in the hardware under design
-Machine shop experience desired
-Precision, tight tolerance machined hardware (some tolerances down to +/- .001)
-Needs to have ability to prepare and present designs for team review
-Self-starter, deadline driven

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 17002
Job Location: Canoga Park, CA
Rate: $45.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Verification Engineer

Description:
A Digital Verification Engineer job in Redmond, WA is currently available through Belcan. This will be a full-time direct hire opportunity. In this role, you will be responsible for supporting the automotive 3D LiDAR sensing application. This is a great opportunity to become a key member of the digital team bringing your experience and vision to designing prototype hardware. To be considered for this role, you will have a Bachelors degree in Electrical Engineering or a related discipline and 1 or more years of relevant experience.

Digital Verification Engineer Job duties:

* Develop self-checking test benches using standard verification techniques.
* Develop directed/constraint-random test cases.
* Run RTL and gate-simulations, debug problems.
* Running and triaging regressions, tracking bugs, and analyzing coverage.
* Supporting automated regression and test Linux environment.

Qualifications:

* BS in Electrical Engineering or related field and 1+ years of experience or equivalent
combination of education and experience.
* A solid understanding of object-oriented concepts and experience designing class-based test
benches.
* A solid understanding of object-oriented concepts and experience designing class-based test
benches.
* Knowledge of System Verilog/OVM/UVM.
* Python or similar scripting language.
* Experience with HDL simulators (Mentor, Cadence, Synopsys etc).

If you are interested in this Digital Verification Engineer position in Redmond, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 317007
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (Low voltage) Designer with AutoCAD skills

Description:
Our client in Northern WA area is a Security System company looking for an electrical Designer with experience in Low Voltage electrical design with AutoCAD skills to design alarm systems and create schematics/diagrams.


Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace, architecture, medical device, and other industries in WA State, around the US, Canada and Europe. We have been in business 20 years in the US and 8 years in Europe.

Position purpose/core responsibilities:

The Drafter will produce electrical and alarm system designs and drawings in AutoCAD and maintain design department resources (block libraries, etc).

Main Duties:

It is expected that the following duties will be performed in a timely, accurate manner while following appropriate procedures and meeting applicable standards of performance and deadlines.

Create designs and drawings in AutoCAD from engineering specifications..
Ensure designs adhere to company standards and engineering requirements.
Other duties as assigned.
Qualifications:

Strong knowledge of low voltage electrical systems design
Professional AutoCAD drafting experience: 3+years (Preferred)
Able to understand system specification documents and convert these into designs and drawings.
Able to discuss system designs with engineering staff and communicate design intent to customers.
Reliable, punctual, detail-orientated.
Strong computer technical skills.
Effectively communicate with team members.
Ability to shift priorities quickly.
Electrical or Engineering Drafting background.
On-site commercial construction experience a plus.
If interested, please send your updated resume in Word doc format to engineer@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
 
Job Number: KD-1919
Job Location: WA
Rate: DOE
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: KELTIA DESIGN INC
Attention: kevin
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (Low voltage) Designer with AutoCAD skills

Description:
Our client in Northern WA area is a Security System company looking for an electrical Designer with experience in Low Voltage electrical design with AutoCAD skills to design alarm systems and create schematics/diagrams.


Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace, architecture, medical device, and other industries in WA State, around the US, Canada and Europe. We have been in business 20 years in the US and 8 years in Europe.

Position purpose/core responsibilities:

The Drafter will produce electrical and alarm system designs and drawings in AutoCAD and maintain design department resources (block libraries, etc).

Main Duties:

It is expected that the following duties will be performed in a timely, accurate manner while following appropriate procedures and meeting applicable standards of performance and deadlines.

Create designs and drawings in AutoCAD from engineering specifications..
Ensure designs adhere to company standards and engineering requirements.
Other duties as assigned.
Qualifications:

Strong knowledge of low voltage electrical systems design
Professional AutoCAD drafting experience: 3+years (Preferred)
Able to understand system specification documents and convert these into designs and drawings.
Able to discuss system designs with engineering staff and communicate design intent to customers.
Reliable, punctual, detail-orientated.
Strong computer technical skills.
Effectively communicate with team members.
Ability to shift priorities quickly.
Electrical or Engineering Drafting background.
On-site commercial construction experience a plus.
If interested, please send your updated resume in Word doc format to engineer@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
 
Job Number: KD-1919
Input Date: 06/10/2025
Firm Name: KELTIA DESIGN INC
Attention: kevin
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
An Electrical Engineer job in Salem, VA is currently available at Belcan. To be considered for this role, you must have a Bachelor's degree in Electrical Engineering and 2-10 years of experience with design and development tools. In this role you will be part of a team developing electric power generation and control platforms used for solar, batter storage, wind, and other applications.

Essential Responsibilities
Electrical Engineer Job Duties:
· Develop hardware design documentation for embedded control systems.
· Design electrical schematics and print circuit boards for electric power systems.
· Develop FPGA-based solutions for communications and other I/O.
· Provide technical support to resolve field issues
· Own and maintain electronic platforms across throughout the product life cycle.
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals

Job Qualifications:
· Strong demonstrated aptitude for electrical design.
· Digital and analog circuit design expertise
· FPGA development experience
· Familiarity with Cadence tool chain
· Familiarity Altera and/or Xilinx toolchains
· Co-op or internship experience with design and development tools.
· Electrical Engineering Degree or Computer Engineering Degree
· Legal authorization to work in the U.S. is required/U.S. Citizen only

Preferred Skills:
FPGA coding, Spice, Printed Circuit Board design, interest or experience in electric power industry
 
Job Number: 318272
Job Location: Salem, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: VarunSingh
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Aeronautical -- Secret

Description:
Responsibilities:
• Support efforts to develop and mature solid rocket motor propulsion system programs and internal research and development activities.
• Support BD with support of new business opportunities via marketing efforts and proposal support.
• Support efforts with creation of preliminary designs in support of new business opportunities and proposals.
• Support propulsion and subsystem IPT leads to ensure technical and cost execution of each system component.
• Check completed layouts and drawings for clarity, completeness, conformity to standards, specifications, and accuracy of dimensioning.
• Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, contractual specification requirements and cost, and make recommendations for improvement.
• Document and present design, manufacturing and testing status as needed.
Qualifications - External
REQUIREMENTS:
This requisition may be filled at either as Engineer Propulsion or a Principal Engineer Propulsion Basic Qualifications Propulsion Engineer:
• Bachelor’s Degree in Mechanical/Aerospace Engineering & 2 years of experience or Master’s Degree in Mechanical/Aerospace Engineering & 0 years of experience
• Ability to obtain a Secret Clearance, which requires US Citizenship as a pre-requisite
• Working knowledge of Computer Aided Design (CAD) software
• Proficient ability to use Microsoft Office suite (Excel, Word, Power Point, Project)
• Knowledge of general machine shop fabrication processes
• Excellent interpersonal, communication, writing, presentation and critical thinking skills.
• Ability and willingness to travel to meet with various customers, in both government and industry, and to interface with suppliers.

Basic Qualifications Principal Propulsion Engineer:
• Bachelor’s Degree in Mechanical/Aerospace Engineering & 5 years of experience or Master’s Degree in Mechanical/Aerospace Engineering & 3 years of experience or a PhD
• Ability to obtain a Secret Clearance, which requires US Citizenship as a pre-requisite
• Working knowledge of Computer Aided Design (CAD) software
• Proficient ability to use Microsoft Office suite (Excel, Word, Power Point, Project)
• Knowledge of ANSI Geometric Dimensioning and Tolerancing (GD&T)
• Knowledge of general machine shop fabrication processes
• Excellent interpersonal, communication, writing, presentation and critical thinking skills.
• Ability and willingness to travel to meet with various customers, in both government and industry, and to interface with suppliers.

Preferred Qualifications:
• Current Active Security Clearance
• Working knowledge of NX
• Additive manufacturing experience
 
Job Number: 2110141053
Job Location: Elkton, MD
Rate: 55.00
Per Diem: Possible
Overtime: Possible
Duration: 9 Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland, Sr
Address: 545 E JOHN CARPENTER FWY STE 950
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electrical - Secret

Description:
Job Knowledge/Technical Skills
Performs research, design, and development in such areas as power conditioning electronics, analog circuit design, digital circuit design, FPGA design, and other general electrical engineering design functions.
Applies research to the planning, design, development and testing of electrical circuits for use in military applications.
Is capable of generating design schematics preferably with experience using CAD tools such as Mentor Graphics.
Develops specifications for and performs selection of components for use in electrical circuits for military applications. Utilizes electrical CAD tools such as Mentor System Vision for circuit performance prediction in aid of circuit development.
Oversees board layout and provides pertinent design factors for first pass success on circuit realization.
Compiles and analyzes test data to determine effect of design on electrical circuits for military applications.
Possess strong analytical skills to enable risk analyses and management throughout program.
Possess strong interpersonal skills to work effectively within a development team to understand system level interdependencies that impact requirements and design constraints.
Preferably an understanding of Design for Six Sigma (DFSS) disciplines; including design for assembly / design for manufacturing (DFA/DFM).
Qualifications - External
Prerequisites:
Requires a minimum BSEE or BSCE +5 years or an MSEE +3 years from an accredited college.
Design experience in the areas of analog, digital, power conditioning, PWB/CCA design and evaluation, electronics packaging, processors and FPGAs. History of leading technical activities.
Experience in modeling and simulation of systems at various levels of integration.
Prefer experience in developing high reliability electronics to meet military environments such as extreme temperature conditions, high G shock loads, vibration, and extended storage times.
Ability to communicate clearly and effectively to cross functional team members.
Ability to work independently as well as in a team environment.
Ability to work effectively in a fast paced, rapidly changing, short turn-around environment.
Position may require occasional travel to meet with various customers, in both government and industry, and to interface with suppliers.
Experience in technical leadership of an electronics development program requiring the coordination of engineering work effort is preferred.
Required:
US Citizenship
Active Secret Clearance
 
Job Number: 2110141084
Job Location: Minneapolis, MN
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland, Sr
Address: 545 E JOHN CARPENTER FWY STE 950
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician II

Description:
Are you looking for a challenging opportunity that leverages your technical expertise? We may have the position you are seeking!

As an Engineering Technician II, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.

Must-haves:
*Associate's degree in a related field of study and at least 2 years of relevant experience
*A higher level degree may substitute for experience
*Related experience may be considered in lieu of required education
*Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
*Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Preferred:
*Previous experience and/or certifications within the aerospace and defense industry
*Previous experience in a manufacturing environment
*Experience with AutoCAD or other 3-D CAD software
*The ability to obtain and maintain a Security Clearance may be required Learn more about *the background check process for Security Clearances

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Middleton, WI
Rate: $25/HR - $29.50/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GSE Project Engineer - Level 2 / Level 3

Description:
Inconen is looking for a GSE Project Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

**Project Engineer with Ground Support Equipment (GSE) experience is required**
**Aerospace Assembly Support Equipment Design Experience**
**Position requires knowledge of aerospace handling, installation and transportation methods and products to support**
**This position will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Solid Rocket motors**
**Experience in Design and Manufacturing is a must**
**5 to 10 years of experience and a Bachelors Degree or equivalent are required**


Duties:
-Under minimal supervision, performs engineering clean sheet design assessments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Product Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Solid Rocket Motors
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.
-Experience with lifting devices, transportation and handling.

Desired Skills:
-Experience with CREO Cad Software.
-Experience with over-road transport of critical items, including the permitting process for chemicals and explosives transport.

Education:
-Bachelor’s degree in Mechanical Engineering or Aerospace Engineering and 5-10 years of related technical experience as engineer or equivalent combination of education and experience.
 
Job Number: 16991
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer II

Description:
We are currently seeking a motivated and tenacious engineer who will support Assembly Integration and Test operations as a representative of spacecraft design.

The ideal candidate will excel in a demanding, fast-paced, and evolving environment where they will work as part of a strong, agile and highly motivated team to accomplish the first of its kind commercial winged-body spacecraft. This individual takes pride in his/her thoroughness, emphasis on follow through, interorganizational communication skills and attention to requirements conformance. The candidate will be able to problem solve from the component level to installation level addressing often first time problems and use strong logic and engineering tools to come up with solutions to problems that meet or exceed drawing and document requirements. A successful applicant will have the ability to thrive in a challenging multidisciplinary build environment, collectively solving build problems that require collaboration and agreement of the Design, Quality and Manufacturing organizations.

Liaison engineer team members are responsible as the primary interface for manufacturing floor activity for Cargo Module fabrication on the CRS2 program. Liaison’s goal is to ensure design requirements are met between production, planning, and supply chain, while maintaining schedule. Through a detailed understanding of the build processes, design requirements and extensive collaboration with the internal teams designing and managing installations, this team is a key stakeholder to ensure that the overall build of CM design achieves all objectives.

Primary Responsibilities Include:
*Nonconformance (MRB)
*Assess, disposition, analyze, justify, determine cause and relay improvements for build discrepancies, errors and other nonconformance's.
*Provide guidance on when NC’s are appropriate vs other engineering change options, enforce process standards, and provide streamlined support to quickly address and close.
*Understand, prioritize, communicate and execute nonconformance against program schedule.

Engineering Change:
*Develop and utilize knowledge of various engineering change options, determine and execute the appropriate change option that creates the shortest path and meets engineering requirements for each unique problem.
*Document, prioritize, communicate, and track required engineering changes fed back to the spacecraft design organization for resolution.
*Work closely with manufacturing, quality, planning, and procurement teams to address changes and shepherd them through fruition on the production floor.
*Contribute to innovative, time saving, and cost-effective improvements to help streamline engineering change and response times.

Drawings, Processes and Technical Specifications:
*Provide guidance to technicians, engineers, and quality assurance engineers related to drawing and spacecraft requirements by overseeing installations; providing training, and information briefs on key topics.
*Support the development and maintenance of program specific technical specifications, and follow through on execution of these specifications to drive efficiency.
*Contribute to development and execution of standard repairs, analysis methods, and acceptable defects to streamline defects processing through MRB.
*Monitor existing processes and nonconformance trends to develop tools and other methods to reduce manufacturing build hours and quality issues, increase production rates, and remove waste from complex processes.

Must-haves:
*Bachelor’s degree in aerospace, mechanical, industrial or manufacturing engineering
Background in the aerospace industry preferred, but not required.
*3+ years, 1 years of which were in a manufacturing environment

Preferred:
*Aerospace propulsion, hydraulics, mechanisms design and build experience desired
*Familiarity with CNC machine control, especially automated tube bending
*Thorough understanding of welding, specifically TIG welding and orbital tube welding machines
*General knowledge of industry standard plumbing and piping system codes, including ASME B31.1/31.3 and D17.1
*Familiarity with common tube joining methods, including fittings and seals of various types
*General knowledge of aerospace NDE, including RT, UT, hydro/pneumatic testing
*Experience in design and build of primary and secondary composite structures
*Experience in design and build of metallic structures and fittings
*Proficient or familiar with hand calculation methods for structural analysis
*Proficiency preferred in NX CAD, but experience is another CAD package is acceptable
*Familiar with typical PLM architecture
*Excel, or similar data analysis software
*Experience with utilizing, developing, optimizing, interpreting and maintaining process specifications and work instructions
*Ability to influence without authority, tenacious, and highly energetic
*Able to adapt to a fast-paced and evolving work environment
*Confident and competent in communication across departments and at different levels of leadership
*Experience driving cross-functional changes to address specific technical problems
*Experience monitoring, tracking, and continually improving design via root cause analysis

Additional Responsibilities Include:
*This position will be shift work to cover 24/7 operations.
*Some shifts include weekend work, 3-6 month rotations between week and weekend shifts, and full time second shift based on the specific needs of production
*Position will require individuals comfortable working as the sole design representative if on 2nd or weekends
*Position may require split responsibilities between the Liaison and Design Engineering organizations.

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Denver, CO
Rate: $44/HR-$46/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Composite Structures

Description:
Manufacturing Engineer - Composite Structures
Mojave, CA
US Persons is a MUST

We are seeking a Composite Structures Manufacturing Engineer with experience in composite aircraft production. The primary task will be to help establish the manufacturing process flow and documentation for the fabrication and assembly of composites structure in an effort to set up production operations for the Production Team. The manufacturing engineer in this position will help define what production equipment, tools, systems, and materials will be required in order to create an efficient, organized, and lean factory. After production operations begin, the engineer will assist overseeing much of the composite fabrication and assembly and work on process improvement and production optimization using lean processes and tools.

Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years’ experience in lieu of formal education.
Experience with aircraft composites fabrication and assembly required.
FAA approved Airframe and Powerplant license (A&P License) a plus.
Experience with aircraft systems integration, installation, and assembly a plus.
Knowledge of lean manufacturing philosophies and tools.
Excellent verbal and written communication skills.
Excellent interpersonal and coaching skills.
Ability to interact with all levels of the organization.
Excellent organizational skills and problem-solving skills.
Strong team player.
Excellent computer skills, word, excel, MS Project and Powerpoint.
CAD experience (CATIA V5 preferred).
GD&T skills through experience and/or formal training.
Knowledge and experience with AS9100 a plus.
Experience with manufacturing based ERP systems a plus.

The Structures Company LLC is an AA/EOE
 
Job Number: 503
Job Location: Mojave, CA
Rate: $55-65/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Mechanical Systems

Description:
Manufacturing Engineer, Mechanical Systems
Mojave, CA
US Persons a MUST

We are seeking a first-rate qualified manufacturing engineer with experience in aircraft mechanical system fabrication, assembly and integration. The primary task for this role will be to help establish the manufacturing process flow and documentation for the installation of mechanical systems in an effort to set up production operations for the Production Team. The engineer in this position will help define what production equipment, tools, systems, and materials will be required in order to create an efficient, organized, and lean factory. After production operations begin, the engineer will assist overseeing much of the systems installation and work on process improvement and production optimization using lean processes and tools.

Experience with aircraft mechanical systems integration, installation, assembly, or modification required.
 FAA approved Airframe and Powerplant license (A&P License) a plus.
 Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years’ experience in lieu of formal education.
 Experience with composite structure and assembly a plus.
 Knowledge of lean manufacturing philosophies and tools.
 Excellent verbal and written communication skills.
 Excellent interpersonal and coaching skills.
 Ability to interact with all levels of the organization.
 Excellent organizational skills and problem-solving skills.
 Strong team player.
 Excellent computer skills, word, excel, MS Project and Powerpoint.
 CAD experience (CATIA V5 and Solidworks preferred).
 GD&T skills through experience and/or formal training.
 Knowledge and experience with AS9100 a plus.
 Experience with manufacturing based ERP systems a plus.

The Structures Company LLC is an AA/EOE
 
Job Number: 502
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Production Support

Description:
General Summary:
The Manufacturing Engineer position is responsible for the efficient build of a high quality aircraft which includes but not limited to: configuration control, creation of planning, tooling (manufacturing aides), work sequencing and designing efficient build methods. Successful candidate must have a strong mechanical background with sheet metal (Structures), and aircraft production experience.

Duties and Responsibilities:
1. Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment.
2. Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications.
3. Develops solutions for production problems relating to materials, manufacturing processes and/or the right tooling.
4. Interprets engineering drawings to determine requirements meet objectives. Acts as liaison between Design Engineering, Tooling department, Quality, and Production.
5. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required
6. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
7. Ensures completed tasks have been performed and inspected in accordance with HACI standards. Identifies and corrects assigned production and manufacturing issues.
8. Prepares and updates planning. Assist with BOM identification and control. Prepares tool orders and verifies compliance.
Education, Experience, Certification and/or Licensure:
1. Bachelors’ degree (Technical) plus 2 years aviation experience
2. Lean, 5S and experience in a manufacturing environment
3. Preferred, Six Sigma Training.
4. Experience with process improvement and cost savings.
5. Preferred, GD&T Training
6. Preferred, Airframe & Powerplant license
7. Preferred, Interiors experience


Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
12. Working knowledge of sheet metal related processes including (but not limited to): Metal Forming, Bending, Laser Cutting, Shearing, Stamping, Stretch Forming, Waterjet Cutting, and Basic Machining Operations

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.



The Structures Company LLC is an AA/EOE.
 
Job Number: 509
Job Location: Greensboro, NC
Rate: $35-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Tooling

Description:
Sr. Tooling Engineer
Mojave, CA
US Persons a MUST

We are seeking a first rate Sr. Tooling Engineer with experience in tooling design and composite aircraft production. The primary task for this role will be to design Composite layup tooling as well as being the subject matter expert. This engineer will be able to evaluate factors such as tolerance, production rate, cure temperature, program schedule, CTE, and part quantity to determine the best options for tooling.

Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline preferred, or 7+ years’ experience in lieu of formal education.
10+ years of role related experience may be substituted for formal education.
Experience in aircraft composite fabrication and assembly processes.
Knowledge of lean manufacturing philosophies and tools.
Excellent verbal and written communication skills.
Excellent interpersonal and coaching skills.
Ability to interact with all levels of the organization.
Excellent Organizational Skills and problem-solving skills.
Strong team player
Excellent computer skills, word, excel and PowerPoint.
CAD experience (Catia V5 preferred, but any CAD experience acceptable)
Ability to read, interpret and create engineering drawings.
Knowledge and experience with AS9100 a plus.
Experience with manufacturing based ERP systems a plus.
Knowledge of GD&T a plus

The Structures Company LLC is an AA/EOE
 
Job Number: 501
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Are you known for your attention to detail and pride yourself in being a responsible professional Manufacturing Engineer? Join our team and take your career to new heights!

Position Purpose:
*Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
*Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
*Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
*Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
*Author DRDI/DMT rework instructions to support effective corrective actions.
*Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
*Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
*Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
*Investigate and assist in preparing justification for equipment and facility requests.
*Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
*Participate in Design for Manufacturing assessments with Engineering.
*Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
*Perform audit of co-workers output based on defined requirements and procedures.
*Must demonstrate knowledge of ME policies and procedures.
*Incorporate Lean Manufacturing Methodology into existing and future processes.
*With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
*Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
*Support all Safety, Sustainability and Ergonomic Initiatives.
*Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
*Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
*Initiate and maintain accurate daily/weekly activity status based on work output, as required.
*Perform other duties as assigned.
*Proven knowledge of Lean and/or Six Sigma principles.
*Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
*Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
*Lean Six Sigma Greenbelt Certification or higher preferred.

Unique Skills:
*Catia V5, SmarTeam,
*SAP and Solumina experience required
*G700 manufacturing line support experience preferred
*G700 MBOM / Work Instruction authoring experience preferred

Education Requirements:
*Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*Eighteen months Manufacturing Engineering, planning, or related technical experience.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Savannah, GA
Rate: $48/HR-$55/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous SAP MRP experience preferred
Previous Solumina MES experience preferred
Previous work experience in fast paced manufacturing environment
Knowledge of Lean Manufacturing Principles

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16767
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17043
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Experience in SAP and Solumina preferred.
-Root Cause Correct Action Experience required.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17314
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Unique Skills:
• Experience in SAP and Solumina preferred. Root Cause Correct Action Experience required.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-637
Job Location: Savannah, GA
Rate: $52.50-$55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Weekend Day Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Previous planning experience with Solumina.
- Experience with ship side support.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17042
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Second Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (Second Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Catia V5, SmarTeam, SAP and Solumina experience required
- G700 manufacturing line support experience preferred
- G700 MBOM / Work Instruction authoring experience preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17187
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Weekend Day Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Catia V5, SmarTeam, SAP and Solumina experience required
- G700 manufacturing line support experience preferred
- G700 MBOM / Work Instruction authoring experience preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17191
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Willingness to work flexible schedule to include weekends and stay over as required to support scheduled A/C flights.
2. Previous experience supporting live A/C strongly preferred.
3. Previous Solumina planning experience strongly preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 17185
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 17214
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.

Unique Skills:
• Willingness to work flexible schedule to include weekends and stay over as required to support scheduled A/C flights. Previous experience supporting live A/C strongly preferred.
• Previous Solumina planning experience strongly preferred.

Essential Functions:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
• Ensure quality policies are being practiced; make recommendations to improve quality.
• Perform other duties as assigned.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 24-268
Job Location: Savannah, GA
Rate: $62/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Inconen is looking for a Mass Properties Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Minimum 5 years of broad Mass Properties experience.
-Mass Properties Special Missions work experience preferred. Experience with using 3D CAD tools, CATIA V5 preferred.
-Strong Excel, PowerPoint and Word skills required.
-Robust understanding of aircraft W&B and operational loading of aircraft.

Education and Experience Requirements:
-Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17017
Job Location: Savannah, GA
Rate: $67.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
A Mechanical Engineer job in Palo Alto, CA is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for the design, analysis, prototype build, and testing of an actuated mechanism on the aircraft. To be considered for this role, you will have a B.S. Degree in Engineering along with at least five (5) years of experience with metallic component design and analysis, preferably mechanisms.

Mechanical Engineer Job Responsibilities:
* Apply understanding of load paths, design best practices, and mass/volumetric constraints to collaboratively design key propulsion mechanisms.
* Analyze components and systems using a combination of hand calculations and FEA.
* Generate engineering drawings for components and assemblies using GD&T.
* Maintain assembly CAD and release parts and drawings in PDM.
* Work closely with other teams (systems, certification, airframe, wire harness engineering, etc) and clearly communicate timelines, clearances, load paths, etc.
* Be responsible for hardware sizing and selection, including fasteners, bearings, and actuators. Work directly with suppliers to source hardware to meet requirements.
* Mentor junior mechanical engineers, and contribute to team resources and shared knowledge through participation in design reviews, generating how-tos, and setting an example of excellent work.
* Complete prototype builds and support testing of mechanisms to verify that designs meet requirements and specifications.

Mechanical Engineer Job Requirements:
* B.S. Degree in Engineering
* 5+ years of experience with metallic component design and analysis, preferably mechanisms
* CAD expert (NX preferred)
* Experience with a PDM system (Teamcenter preferred)
* GD&T experience
* Knowledge of FAA aircraft certification requirements for Part 23 aircraft
* Hands-on machine shop experience
* Demonstrated interest in aviation
* Mechatronics and actuation background

If you are interested in this Mechanical Engineer job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 317351
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer with Aerospace/Aircraft background

Required:
Bachelor's of Science degree in Mechanical Engineering or related Engineering discipline and typically 10 or more years of relevant experience Significant practical knowledge of engineering principles and practices

Experience with Computer Aided Engineering tools

Small team leadership experience

Familiarity working in multi‐disciplinary design and development teams

Experience in a tight, schedule driven environment

The ability to obtain and maintain a Security Clearance may be required. Learn more about the background check process for Security Clearances
Preferred:

Solidworks CAD experience (2D and 3D)

Experience applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

Understanding of Engineering Simulation such as Finite Element structural Analysis (FEA), Computational Fluid Dynamics (CFD) and Thermal Analysis

Background in the Aviation and Defense Industry

Knowledge of industry‐standard mechanical design principles, to include, but not limited to parametric design, model‐based definition, material hardware selection, manufacturing, and production processes

Enovia/PLM experience a plus
 
Job Location: CO
Input Date: 06/10/2025
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

Mechanical System Design 2

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs detail design development and modification of mechanical and fluid system installations. Performs spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under general supervision.

Responsibilities:
Support the design, analysis, test, and integration of air vehicle subsystems, including but not limited to:
o Landing gear, Steering, Braking, Flight control actuation, Hydraulic systems, Launch and recovery, Payload doors, Environment control system ECS, Ground service equipment - GSE
Support definition of requirements for air vehicle subsystems.
Manage functional and physical interfaces between vehicle subsystems and the vehicle.
Performs analysis, modeling, and simulation to verify subsystems and components meet requirements.
Support execution of component, subsystem, and system-level testing, including generating test plans and procedures, test execution, and analysis of test results.
Communicates information about vehicle subsystem design, requirements, and performance between the design team, management, customer, subcontractors, and vendors.
Minimum Requirements
Minimum of B.S. in mechanical or aerospace engineering (or related STEM discipline) plus 2+ years of relevant experience (or equivalent combination of technical education and experience).
Demonstrated expertise in development of aerospace vehicle subsystems.
Experience with CAD software (CATIA V5 preferred).
Excellent written and communication skills.
Must be a U.S. Person.
Desired Requirements
Experience leading the development of aerospace systems, from conceptual design through production.
Project management experience.
Experience with system engineering processes, including but not limited to requirements development, system safety analysis (FHA, FTA, FMEA development), and reliability analysis.
Experience with finite element analysis, multi-body dynamics analysis, and/or thermal analysis.
Hands-on experience working with machine shops, specifying fasteners, bearings, and other hardware, integrating prototype aircraft, and conducting performance tests.

Physical Requirements
On-site/Hybrid in Manassas, VA - preferred
On-site/Hybrid in Cambridge, MA - acceptable

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2251-2248-11534
Job Location: Manassas VA
Per Diem: --
Overtime: --
Start Date: 2022-04-25
Input Date: 06/10/2025
Last Updated: 07/06/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design 3

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

Responsibilities:
Conduct the design, analysis, test, and integration of air vehicle subsystems, including but not limited to:
o Landing gear, Steering, Braking, Flight control actuation, Hydraulic systems, Launch and recovery, Payload doors, Environment control system ECS, Ground service equipment - GSE
Support definition of requirements for air vehicle subsystems.
Manage functional and physical interfaces between vehicle subsystems and the vehicle.
Performs analysis, modeling, and simulation to verify subsystems and components meet requirements.
Support execution of component, subsystem, and system-level testing, including generating test plans and procedures, test execution, and analysis of test results.
Communicates information about vehicle subsystem design, requirements, and performance between the design team, management, customer, subcontractors, and vendors.
Minimum Requirements
Minimum of B.S. in mechanical or aerospace engineering (or related STEM discipline) plus 5+ years of relevant experience (or equivalent combination of technical education and experience).
Demonstrated expertise in development of aerospace vehicle subsystems.
Experience with CAD software (CATIA V5 preferred).
Excellent written and communication skills.
Must be a U.S. Person.
Desired Requirements
Experience leading the development of aerospace systems, from conceptual design through production.
Project management experience.
Experience with system engineering processes, including but not limited to requirements development, system safety analysis (FHA, FTA, FMEA development), and reliability analysis.
Experience with finite element analysis, multi-body dynamics analysis, and/or thermal analysis.
Hands-on experience working with machine shops, specifying fasteners, bearings, and other hardware, integrating prototype aircraft, and conducting performance tests.
Physical Requirements
On-site/Hybrid in Manassas, VA - preferred
On-site/Hybrid in Cambridge, MA - acceptable
Fully Remote - acceptable, case-by-base

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2252-2249-11534
Job Location: Manassas VA
Per Diem: --
Overtime: --
Start Date: 2022-03-24
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer(Mechanical Systems)

Description:
A MRB Engineering job is currently available through Belcan in Bear Valley Springs, CA. This is a 6-month contract assignment with the possibility of being extended. Great matching candidates will have 5-20 years+ of Aircraft Design Experience and a BS Degree in Engineering or related field. You will be responsible for collaborating with the engineering and manufacturing teams to accurately define mechanical requirements, systems interfaces, and produce manufacturing drawings.

MRB Engineer job duties:
* Provide technical expertise in the definition, design, and manufacturing of mechanical systems
* Collaborate with other disciplines to assure efficient, accurate, producible design results
* Effectively communicate across disciplines and coordinate the implementation of design constraints to achieve an optimal design
* Quickly and accurately communicate risks, technical/schedule/cost, and risk avoidance opportunities using appropriate program procedures
* Exhibit respectful and effective communication skills appropriate to a service provider-based atmosphere
* Provide general build support including assisting in the evaluation of non-conforming hardware

Qualifications:
* B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
* At least 5 years of relevant industry experience
* Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
* Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
* Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
* Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
* Knowledge and experience with AS9100 a plus
* Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
* Experience with manufacturing based ERP systems a plus
* Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
* Strong team player and ability to work independently with excellent organizational and problem-solving skills
* Composite and metal design experience preferred
* Understanding of MRB requirements & procedures
* Extensive working knowledge of engineering drawings / requirements
* NDT/Visual non-conformance disposition expertise
* Experience with control & segregation requirements for non-conforming material
* Familiarization with records accuracy & completeness (including data codes)
* Ability to facilitate inadequate cause & corrective action resolutions
* Familiarization with rework vs accept disposition risk assessments
* Familiarization with final dispositions & re-submit codes
* Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage)
* Experience should be in a production and/or schedule-driven environment
* Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
* Strong written/verbal communication and interpersonal skills
* Typically a 9 hour work day, with some scheduled weekend support required


If you are interested in this Mechanical Systems Design Engineer job please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 317403
Job Location: Bear Valley Springs, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Programmer 2

Description:
Assists in numerous tasks related to numerical controlled manufacturing, including research and data collection to support cross functional teams, establishing technical requirements for manufacturing and producibility and planning the integration of new machining techniques and manufacturing methods, processes, software and equipment. Develops, revises and verifies Machine Control Data (MCD) and geometry. Provides machine operator instructions and documentation for automated or numerically controlled equipment per established process. Works under general supervision.

Project/day-to-day activities will include programming simple to complex 3-5 axis CNC mill jobs.

Top 3-5 technical/software skills needed to perform this role/job: UG NX Cad/Cam, Vericut, and Machining experience.

100% onsite

Education/experience typically acquired through advanced education (e.g. Associate) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor, 3 years' related work experience, etc.).

Shift expectations: 2nd shift. Will start on 1st shift for 3-6 months then move to 2nd shift

Work schedule: M-F

Start time: End time: 1st shift 6:00 am – 2:30 pm, 2nd shift 2:30 pm – 11:00 pm

Potential conversion for the ideal candidate
 
Job Number: JPC-1955
Rate: 53 HR
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Systems Controls Engineer

Description:
A Power Systems Controls Engineer job is currently available through Belcan. As a Power Systems Controls Engineer you will provide field service systems integration engineering and technical consultation for customers in the areas of system design, programming, installation, start up, maintenance, repair, training and modification of automated control systems and power management systems. To be considered for this position, you will need a Bachelors in Electrical, Chemical or Mechanical Engineering and 3-5 years' experience.

Responsibilities:
* Write and deploy complex power and control schemes including load shedding/ peak shaving schemes utilizing multiple distributed energy resources, Microgrid operations, breaker control schemes, SCADA system development.
* Ensure projects have proper controls, metering and monitoring. Controls include Power meters, automation equipment (PLC/HMI), protective relays, load sharing, synchronization, etc.
* Provide sketches, mark-ups and direction to Electrical Designers to develop project drawings. Review and approve project drawings. You may also be responsible for completing the CAD drawings.
* Capable of programming in SQL, Visual Basic, C, C++, C#, or equivalent
* Knowledge of digital multifunction relays for genset protection and utility requirements: GE Multilin and Schweitzer Engineering Laboratories

Qualifications:
* Bachelors Degree from an accredited university
* 3+ years' experience in the power system industry
* Knowledge of SCADA systems and associated protocols is preferred
* Experience with any of the following manufactures: Emerson DeltaV, GE, Modicon PLCs, Rockwell Automation, Wonderware, Siemens


If you are interested in this Power Systems Control job, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 317354
Job Location: Houston, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal ASIC Design Engineer

Description:
A Principal ASIC Design Engineer role located in Gresham, Oregon is currently available through Belcan. The Principal ASIC Design Engineer will get hands-on experience developing next generation of storage and memory controller SoC products. This will involve taking a design from initial concept to production form. Throughout you will work beside experienced engineers and be exposed to Best-In-Class engineering practices. Working side-by-side with some of the brightest minds and most innovative people in the industry, you won't just fill a position, you will be given an opportunity to work on a team where your contributions matter. If this sounds like the kind of environment you'd like to participate in, we'd like to hear from you!

Principal ASIC Design Engineer Requirements:

* Design and implement complex digital integrated circuits at the block, subsystem or device level
* Communicate regularly with the design and verification teams to solve technical problems and
status.
* Provide support of products from specification through to production.
* Read and understand applicable protocol standards.

EDUCATION AND EXPERIENCE REQUIRED:

* Bachelor's or Master's degree in Electrical Engineering, Computer Engineering with 8+ years
related experience.
* Extensive experience with RTL design and coding of synthesizable logic using Verilog, System
Verilog.
* Experience with low power design techniques.
* Familiar with all aspects of the digital ASIC design flow including design, verification, debug,
logic synthesis, physical layout, static timing analysis, and revision control.
* Strong coding / scripting skills with languages such as C/C++, Python, Perl, tcl, etc.
* Working knowledge of Synopsys or Cadence tool flows for simulation, synthesis, and STA.
* Working knowledge of Design for Test (DFT) principles.
* Experience with integration of 3rd party IP and support.
* Protocol knowledge with PCI-Express®, CXL and/or DDR SDRAM protocol is an asset.
* Protocol knowledge SAS/SATA is an asset.
* Experience with embedded microcontrollers and microprocessors is an asset.
* Experience with AXI/APB/AHP is an asset.
* Experience with UVM verification methodology is an asset.
* Excellent analytical and debugging skills and the ability to proactively solve issues.
* Excellent teamwork and time management skills, and ability to work under pressure.
* Excellent communication (written and verbal) and documentation skills.
* Ability to quickly ramp on new projects.
* Must be a US Person

If you are interested in this Principal ASIC Design Engineer role located in Gresham, Oregon please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 317614
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Tool Designer ( Palmdale, CA ) 4257-1

Description:
Principal Engineer Tool Designer ( Palmdale, CA ) 4257-1
6 Month Contract

Pay rate: $50-58/hr W2

A successful Principal Engineer Tool Designer (TD) shall be able to design simple to complex tooling, Drill Jigs and Assembly Jigs, Dies, via Catia/NX to support production. This person shall be able to conceptualize these designs in 3D, detail the CAD model and detail the drawings for fabrication. These drawings shall be properly laid out using views and dimensions that are in compliance with ASME Y14.1-5 standards.
The TD, while being the principle contributor and/or leader, shall work with internal/external customers, and colleagues to ensure that the design meets the customer needs and see it through each phase of the engineering process (Design, Fabrication, and Implementation).
In addition, it is essential that this person have the ability to mentor less experienced engineers, work autonomously and in a team environment, adapt to processes and company policy while providing input or methods of process/design innovation.

Duties include, but are not limited to:
• Execution/Lead/Coordination of design and fabrication requirements for tools and fixtures with customers, both internal and external.
• Performing tolerance analysis to ensure form/fit/function.
• Conduct root cause failure investigations and implement associated corrective actions.
• Lead and Assist Product Development Team with new product designs to ensure manufacturability, validate process/technology.

Basic Requirements:
• Direct experience designing in with 3D CAD e.g. CATIA, NX, CREO etc.
• Direct experience in the application/use of GD&T in accordance with ASME 14.5
Preferred Qualifications:
• STEM Degree (Science, Technical, Engineering or Mathematical)
• Composite experience and process knowledge
• Direct Tool design experience of medium to large scale tooling
• Direct Aerospace Tooling experience
 
Job Number: 4257-1
Job Location: Palmdale, CA
Rate: 55
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: TALENTPRO CONSULTING
Attention: Angelia Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Supervisor

Description:
An Advisory need for a Production Supervisor job is currently available through Belcan in the domestic U.S. This job is a remote position that will travel and deploy to customers within manufacturing and supply chain environments. As critical project issues and needs for crisis intervention arise, this job will deploy to those customers. This job is a flexible, subcontract 1099 status. Great matching candidates will have strong manufacturing and supply chain leadership and supervisory skills capable of driving measurable solutions and outcomes for clients. In this job, you will be on site at customers and/or customer suppliers working to assess, mitigate, consult, identify, and administer outcomes.

Production Supervisor job duties:
* Deploy and travel to the customer(s) as needed.
* Act as an advisor and consult customer by working as a team member ensuring critical customer needs are met.
* Plans and assigns work, and recommends improvements in production methods, equipment, operating procedures, and working conditions.
* Provides leadership and utilizes independent judgment and action necessary to maintain normal on-going operations.
* Ensures employees perform work safely and that equipment is maintained and processes are carried out in compliance with health, safety and environment policies and procedures.
* Manages departmental performance metrics and provides regular KPI progress reports to Leadership. Supports data activities to deliver proper reports to internal and external customers.
* Ensures work meets quality standards. Addresses any non-conforming materials incidents; follows through on quality concern mitigation.
* Provides cross-functional communication with other department supervisors and managers to insure inventory control, production schedules, and on-time delivery.
* Communicate and interact with shop floor personnel, quality/process teams, customer management team, material teams, purchasing teams and other engineers involved in the process.

Qualifications:
* Proven Leader and Subject Matter Expert (SME) within manufacturing and supply chain production.
* Capable of operating onsite alone to professionally represent Belcan to support multiple parties' interests (Customer/Supplier).
* Operate with speed and precision.
* Ability to travel as needed and deploy rapidly in short notice to begin work due to assessment, supply chain disruptions, and project improvement initiatives.
* Background working with Automotive/Aerospace/Industrial OEMs, suppliers, and/or tooling and machine operations.
* Demonstrated capability to accurately assess deficiencies in manufacturing processes, and possesses the technical know-how to troubleshoot and solve complex manufacturability problems.
* Must have experience in both short and long-term improvement projects, with demonstrated capability to gain consensus and implement manufacturing process improvements.
* Proficient in their understanding and performance drivers of contracted KPIs
* Root cause analysis and lean methodologies to aid in both throughput, quality and capacity related issues.

Desired but not required skills:
* Mechanical aptitude and an understanding of design for manufacturing concepts.
* Hands on experience in the shop/manufacturing environment.
* Understanding of Mechanics of Materials and Structural Design.
* Knowledge of CAD Modeling (2D, 3D).
* Proficiency in MS Office products
* Experience with Cost reduction.

If you are interested in this Production Supervisor job that is remote and travels, please apply via the 'apply now' link provided.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com


 
Job Number: 313998
Job Location: Detroit, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Coordinator

Description:
An Architectural Project Coordinator role located in Las Vegas, NV is currently available through Belcan. The Architectural Project Coordinator will be taught leadership skills and is a person who gets things done with minor supervision and direction by Senior Associates. A Project Coordinator-6 is a Professionally Degreed Graduate Architecture or Engineer, or an Associates Degreed professional with Seven (7) to Ten (10) years of professional experience

Architectural Project Coordinator Job Requirements:

* Assist in coordinating and leading the project team, with direction from the Project Manager, in developing construction contract documents for MID RANGE TO SMALL Building Projects. Engage with the PM and IPT to communicate task assignments, solicit status updates, and maintain program milestone achievement projections.
* Assist the Project Manager with project administration from schematic design phase through construction administration phase.
* A Project Coordinator-6 will be assigned specific responsibilities (as listed under the Project Coordinator-7) for specific projects. As a Project Coordinator-6 skill levels increase, project responsibilities will be increased proportionally, thus allowing Project Managers to effectively manage more projects.
* A Project Coordinator-6 may be called upon to assume full Project Coordinator-7 responsibilities. These assignments will be based on the individual Project Coordinator-6 skill level and the specific project's scope of work.
* Be aware of the project scope and of the Client's objectives, Satisfy Client's goals.
* Responsible for successful execution of the project and construction contract documents. The Project Coordinator is one of the Project Managers resources in organizing, coordinating, researching information, code analysis and troubleshooting the project.
* Receive incoming project information and distribute it to the project team and to outside consultants as directed by the Project Manager.
* Represents the firm in a professional manner and provides the quality control for the preparation of construction contract documents. Follows applicable guidelines for project standards as described in the CAD Manual and the Associates Policy & Procedure Manual.
* Assist with review of preliminary designs; reviews of schedules with labor projections. Provides guidance and training for other Project Coordinators and Technical Associates. Assists with maintaining specific project job files; attends project team meetings; anticipates and interprets problems and recommends solutions; reallocates work as necessary to meet scheduled deadlines; Assists in preparing memos and correspondence to Clients and coordinates correspondence with the Project Manager or Principal In-Charge.

EDUCATION AND EXPERIENCE REQUIRED:
* Professional Degree Graduate Architect/Engineer, or holds an Associate's Degree in Architecture/Engineering with a minimum of Seven (7) to Ten (10) years professional experience.
* Relevant work experience to include experience in all phases of architectural drafting, detailing scheduling, and coordination, plus a good knowledge of civil, structural, mechanical and electrical engineering, or any combination of education and experience that provides equivalent knowledge, skill and abilities.
* Strong computer aptitude to include thorough knowledge of computer-aided drafting and design systems.
* Ability to guide and supervise the work of others.
* Strong organizational skills.
* A thorough knowledge of ALL National Building codes.
* Strong understanding of building materials and construction methods and strong knowledge of procedures for production of construction documents.
* Ability to add, subtract, multiply and divide; perform calculation using fractions, decimals, and percentages; perform algebra, geometry and trigonometric calculations.
* Strong ability to make independent decisions within a general framework.
* Attend in-house seminars and continuing education outside of the office.
* Well-developed analytical and problem-solving skills.

If you are interested in this An Architectural Project Coordinator role located in Las Vegas, NV please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312116
Job Location: Las Vegas, NV
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Engineer ( Elkton, MD ) 3636-1, 4008-1

Description:
Propulsion Engineer ( Elkton, MD ) 3636-1, 4008-1
9 Month Contract

Pay rate: $40-50/hr

Responsibilities:
• Support efforts to develop and mature solid rocket motor propulsion system programs and internal research and development activities.
• Support BD with support of new business opportunities via marketing efforts and proposal support.
• Support efforts with creation of preliminary designs in support of new business opportunities and proposals.
• Support propulsion and subsystem IPT leads to ensure technical and cost execution of each system component.
• Check completed layouts and drawings for clarity, completeness, conformity to standards, specifications, and accuracy of dimensioning.
• Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, contractual specification requirements and cost, and make recommendations for improvement.
• Document and present design, manufacturing and testing status as needed.
This requisition may be filled at either as Engineer Propulsion or a Principal Engineer Propulsion Basic

Qualifications Propulsion Engineer:
• Bachelor’s Degree in Mechanical/Aerospace Engineering & 2 years of experience or Master’s Degree in Mechanical/Aerospace Engineering & 0 years of experience
• Ability to obtain a Secret Clearance, which requires US Citizenship as a pre-requisite
• Working knowledge of Computer Aided Design (CAD) software
• Proficient ability to use Microsoft Office suite (Excel, Word, Power Point, Project)
• Knowledge of general machine shop fabrication processes
• Excellent interpersonal, communication, writing, presentation and critical thinking skills.
• Ability and willingness to travel to meet with various customers, in both government and industry, and to interface with suppliers.

Basic Qualifications Principal Propulsion Engineer:
• Bachelor’s Degree in Mechanical/Aerospace Engineering & 5 years of experience or Master’s Degree in Mechanical/Aerospace Engineering & 3 years of experience or a PhD
• Ability to obtain a Secret Clearance, which requires US Citizenship as a pre-requisite
• Working knowledge of Computer Aided Design (CAD) software
• Proficient ability to use Microsoft Office suite (Excel, Word, Power Point, Project)
• Knowledge of ANSI Geometric Dimensioning and Tolerancing (GD&T)
• Knowledge of general machine shop fabrication processes
• Excellent interpersonal, communication, writing, presentation and critical thinking skills.
• Ability and willingness to travel to meet with various customers, in both government and industry, and to interface with suppliers.

Preferred Qualifications:
• Current Active Security Clearance
• Working knowledge of NX
• Additive manufacturing experience
 
Job Number: 4008-1
Job Location: Elkton, MD
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 9 Month
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Engineer

Description:
A Senior Design Engineer position in Plano, TX is currently available through Belcan. In this position, you will design and develop new and derivative optical semiconductor products, and work with a team to establish specifications, implement design, verify product functionality and enable release to manufacturing. To be considered for this role, you must be high energy, resourceful self-starter who demonstrates technology skills and capabilities.

Senior Design Engineer job duties:
* Lead projects through development lifecycle; demonstrate ownership and end-to-end accountability to implement and complete projects in a cost-effective and timely manner.
* Lead cross-functional technical teams including project planning.
* Plan and track the project via project schedules to ensure requirements and project deadlines are met.
* Resolve engineering design and test problems.
* Communicate requirements, schedules and deliverable information to internal and external customers and suppliers.
* Generate technical specifications including data sheets, requirements specifications and product specifications.
* Support Marketing by providing technical information required for data sheets and other marketing literature; providing feasibility studies for candidate new products and technology needed to serve targeted markets.
* Support sales by providing proposals and technical information related to new business opportunity activities.
* Assist with recruiting team members.

Skills & Experience
* BS/MS in Electrical Engineering
* 8+ years experience
* Experience in circuit design or semiconductor design
* Working knowledge of semiconductor processes and testing, with good mechanical aptitude. Experience with optical systems is a plus.
* Experience working in a lab setting with familiarity with test instruments.
* Experience writing system requirements.
* Ability to read and understand detailed technical documents such as design drawings, mechanical drawings, processes and product specifications.
* Ability to utilize applicable CAD/CAE development tools. Experience in programming languages is a plus.
* Strong communications skills both verbally and written. Capable of working effectively with customers, co-workers and supervisors.

If you are interested in this Senior Design Engineer job in Plano, TX please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 318091
Job Location: Carrollton, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Project Component Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Senior Project Component Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Secret clearance preferred but not required**

Job Summary:
-Seeking a Senior Engineer to join our Valves and Actuators team in the Project and Component Engineering department in Canoga Park, CA (Los Angeles area).
-You will join a team working on the development, fabrication and test of propulsion system valve and actuator hardware.

Duties:
-Under general direction, the Project Component Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.

-25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
-25%: Supplier integration with external suppliers ensuing requirements is achieved on time and within budget.
-20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
-20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
-10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to aerospace valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test;
-Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years of experience in related field. MSME/AE degree is highly desirable.
 
Job Number: 17326
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Engineer - Airframe - MUST BE US Persons

Description:
We are seeking an experienced Senior Test Engineer to support Structural Testing of components, assemblies, and integrated airframes. The main tasks of this role is to is to collect test requirements, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment.

Professional Requirements
• 5 years or more experience in aerospace with an emphasis on aerospace structural testing or equivalent laboratory test engineering experience.
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with MTS or equivalent Controls and Data Programs.
• Results oriented, focused on safety, reliability and deliverables to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and Problem-solving Skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be U.S. persons

Education and Experience Required. Bachelor’s degree in Aerospace or Mechanical Engineering from an accredited institution, with a concentration in Design, Structures, Testing or Materials.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Engineer - Systems - MUST BE US Persons

Description:
We are seeking an experienced Senior level test engineer to support structures, systems and avionics testing of components, assemblies, and integrated airframes. The main tasks of this role is to is to collect test requirements, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment.

Professional Requirements
• 5 years or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• Fixture Design and Analysis
• Vibration fixture modal analysis
• Control, instrumentation, and data acquisition for variety of environmental tests of avionics and mech systems
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Ability to perform at a high level with minimal direction.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be U.S. persons

Education and Experience. Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Solid Propulsion Design Engineer – Level 3

Description:
Inconen is looking for a Solid Propulsion Design Engineer – Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

Duties:
-Under general direction, candidate will guide component design and system design of Nozzles, Igniters, Actuators, Pressure Vessels and Solid Propellant used in Solid Propulsion Systems, Controllable Solid Propulsion Systems and Air-Breathing Propulsion Systems.

-40% - Provided Design solutions for Solid Propulsion Systems, Controllable Solid Propulsion Systems and Air-Breathing Propulsion Systems. Propulsion design activities include strategic booster motors, tactical rocket motors and controllable solids. Will work independently and with more senior engineers to develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. May provide guidance to less Senior Engineers and act as lead on assigned projects. Supports trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Conceive and plan design tasks with general direction and work effectively within an Integrated Product Team (IPT) environment.
-30% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.
-20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.
-10% - Participate in presentations for internal and external customer proposal. Responsible for describing design capabilities, proposed design approach, and rationale with cost estimates and schedule.

Skills:
-A strong mechanical aptitude and experience with CAD software tools (CREO) is desired, as well as proficiency with Microsoft Office products (Word, Excel and PowerPoint).

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.
 
Job Number: 17207
Job Location: Huntsville, AL
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr CREO Designer with 9 years of CREO (San Jose, CA)

Description:
***Minimum 9 years of design/drafting experience using Pro-E/Creo***
======
Sr. Designer to create innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.
===============================
If qualified, email a WORD version copy of your resume and then call to discuss at 774-210-4108.
 
Job Number: PL CREO CA
Job Location: San Jose, CA
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2-3 weeks
Input Date: 06/10/2025
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Designer-NX 19 -***Recent UG NX 19 experience mandatory!!***

Description:
Sr. Designer to support program initiatives. ***Current UG NX 19 experience required***MUST See this in the RESUME!*** Creates innovative and practical mechanical and electro-mechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design. Current UG NX 19 experience required.

Current UG NX 19 experience required. Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to provide direction to a design team.

Minimum 9 years of design/drafting experience using UG NX CAD system. Recent UG NX 19 experience mandatory. Associate Degree with emphasis in engineering drafting/design or an equivalent combination of training and experience; plus a minimum of nine additional years drafting and design experience, including five years of advanced design concepts and applications.

***This CONTRACT that does NOT include any paid holidays, paid vacation or sick days***
=========================
If qualified, email a WORD version copy of your resume and then call to discuss at 774-210-4108.
I need the last 4 of your social security # as well as your hourly pay rate in order to get you submitted! Referrals appreciated!
 
Job Number: NX - PL
Job Location: York, PA
Rate: 50.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2-3 weeks
Input Date: 06/10/2025
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Metrologist

Description:
A Sr. Metrologist job in Brea, CA is currently available through Belcan. In this role, you will be responsible for providing expert knowledge in metrology solutions including but not limited to: laser tracker/PCMM inspections, machine alignments, reverse engineering, tool building and assembly, software and hardware training. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 8 years of relevant experience.

Sr. Metrologist Job duties:

* Generate inspection reports to customer specifications. This includes Drawing Based inspection reports, First Article Inspection Reports, Model Based Definition inspection reports, and Dimensional inspection reports.
* Maintain equipment by performing field calibrations and verifying manufacturers maximum performance errors.
* Maintain equipment's cleanliness using manufacturers specifications.
* Assists in recommending solutions for customers applications.
* Generating daily logs to be used for reference if asked by the customer.

Qualifications:

* Expert level experience using Laser Trackers (Leica, Faro and API), PCMM's (Romer and Faro arms), 3D Laser scanners and Total Stations.
* Expert level knowledge of Computer Aided Measuring software (Verisurf, Polyworks, Spatial Analyzer, Buildit etc.).
* Expert level knowledge in blueprint reading and GD&T.
* Solid knowledge of 3D CAD.
* Knowledge in aerospace tooling, composites manufacturing and assembly.

If you are interested in this Sr. Metrologist position in Brea, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316035
Job Location: Brea, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4

Description:
The candidate for this position will guide product design to incorporate new technology and verify structural integrity of various crewed and uncrewed aerial vehicles across commercial and military aircraft, rotorcraft, and spacecraft. Will employ efficient integration of both composite and metallic constructions. Solve complex structural problems by using analytical methods, finite element models/simulations and other analysis tools throughout the development lifecycle.

Requirements:
- BS in Aerospace / Mechanical Engineering or related discipline
- Minimum of 9 years’ experience in the stress analysis field, preferably aerospace or an equivalent combination of technical education and experience – PhD+4 years’ related work experience, MS+7 years’ related work experience
- Must be a US Citizen or Legal US Permanent Resident
- Strong English written, verbal, and electronic communication skills
- Proficiency with Microsoft Office 365 and Windows 10
- Strong experience in classical hand analysis for strength and stability of metallic and composite components
- Working knowledge of MIL-HDBK-516, or FAR Part 23, 25, 27 certification requirements
- Demonstrate proficiency in FEM idealization and good modeling practices using Femap, Nastran, ANSYS, Abacus or other FEA packages
- Experience with a 3D CAD package CATIA V5, Solidworks, Creo, NX/Unigraphics, Fusion 360, etc
- Ability to explain and present analysis and assumptions in a rational manner to customers, leadership, and teammates
- Work at our Manassas VA


Specific Responsibilities:
- Define and document process, certification, and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.
- Work as an individual contributor under minimal direction.
- Write technical reports that are accurate, clear, and comprehensive with minimal review. Provide review and feedback to other analysts
- Lead small teams (3+) and give technical guidance during any stage/level of a program development
- Be proactive in teaching others, sharing experiences, and learning new skills
- Maintain good communication with customers, leadership, or teammates when onsite or remote
- Think ahead and ask questions. Making mistakes is acceptable if we understand and learn from them. Focus on fixing problems when they arise and not placing blame
Desired Skills:
- Experience with prototype development and testing of airframe primary structure
- Automate workflows for speed and efficiency using Microsoft Office 365, VBA, Python, Matlab, or Boeing custom tools
- Experience with fatigue and damage tolerance analysis, categorization of part criticality
- Experience in writing certification reports for Military or FAR Part 23/25/27
- Experience working with FAA or Military DERs
- Resource planning and task estimation for a complex effort supporting bid & proposal
- Able to support the resolution of complex aircraft structural challenges by applying various learned aerospace industry standard classical analysis techniques for both metallic and composite structures
- Cross-disciplinary interests are strongly desired; we love people that combine world-class expertise with a diverse background, hands on experience, and interesting hobbies




The Structures Company LLC is an AA/EOE.
 
Job Number: 525
Job Location: Manassas, VA
Rate: $75-$82/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structural Design Engineer:  Who You Are

Seeking a design engineer with experience developing aircraft modifications or in-service sustainment activities. This role executes work under the supervision of the Design Lead or Manager. Engineers in this position are expected to have strong experience with aerospace standard design practices and methods as well as engineering experience in design and analysis required to develop efficient solutions. 

Structural Design Engineer:  Your Mission

Development of conceptual designs through manufacturing of details, assemblies and installations.
Support operations team to ensure vehicle readiness for flight.  This includes onsite support during implementation of solutions. 
Generate Engineering definition in accordance with the industry and company standards.
Support review of manufacturing plans and procedures to ensure compliance with design requirements.
Manage time effectively to meet the demands of internal customer requirements.
Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.
Structural Design Engineer: What You Bring

Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
4-8+ years of experience in aerospace industry with a strong design emphasis.
In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches.  CATIA V5 preferred.
Experience in aircraft sustainment programs or material review board desired.
Experience with composite tooling, fabrication, and manufacturing methods.
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
Excellent verbal and written communication skills.
Strong team player and ability to work independently with excellent organizational and problem-solving skills.


ITAR Requirements


To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Number: JPC - 1222
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6 Months +
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer - Manufacturing Engineer - Level 3

Description:
Inconen is looking for a Technical Writer - Manufacturing Engineer - Level 3 for our client, a well-known Aerospace Company, in Camden, AR.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

Duties:
-Performs a broad array of Technical Writing and Illustration, editing and layouts in support of work instruction creation in Delmia Velocity software for Camden.
-Looking for manufacturing engineers with technical writing experience, illustration and work instruction creation.
-Support team of engineers, technicians, inspectors and other technical experts to create product assembly instructions.
-From rough drafts or existing text supplied by Manufacturing Engineers (MEs), condense written process instructions into the simplest possible terms to provide a concise, easily understood series of steps needed to create a product.
-Working from engineering drawings, existing 3D CAD files, photographs or videos, sketches, written and sometimes verbal descriptions, use graphics software to create technical illustrations that accurately depict key events and changes to the product that occur during product build.
-Use standard technical writing methods, symbols, notes and other elements to indicate key process and quality controls, safety requirements, and environmental safeguards needed during product manufacture.
-Using publishing software, assemble text, illustrations, and other graphic elements into a finished set of assembly instruction conforming to company standards.

Skills:
Required:
-Experience creating and editing Standard Operating Procedures, Visual Planning and Technical written work instructions.
-Experience in Delmia R15 or other version of same software a plus

Desired:
-Possession of a valid drivers license.

Education:
-Bachelor of Science or equivalent combination of education and experience.
 
Job Number: 17292
Job Location: Camden, AR
Rate: $45.00 - $48.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Palmdale, CA. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315082
Job Location: Palmdale, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Fort Worth, TX. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315081
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Marietta, GA. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315083
Job Location: Marietta, GA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer, Tooling, Composites

Description:
Responsibilities:
Be the company representative onsite at the supplier to help them translate engineering intent, drawings, and configurations into fully functional hardware.

Provide onsite oversight at the supplier.
Review supplier work instructions, procedures, techniques, materials and processes, supply chain, nonconformance reporting and resolution, and obsolescence issues for composites.
Review supplier tooling designs for composite fabrication and assembly.
Lead supplier schedule recovery efforts while ensuring requirements related to technical performance, quality, and services are met.
Ensure that hardware and equipment is manufactured, processed, packaged, and delivered properly, on time, and on budget.

Qualifications:
•Minimum of a B.S. degree in aerospace, mechanical, industrial, or manufacturing engineering; physics; or other major requiring engineering or manufacturing core courses. Composites curriculum is a plus
•7+ years' experience working in composites development or production in hands-on roles
•Expertise in composite hand layup, autoclave cure, trim/drill, tooling, and assembly
•Experience with supplier development for new product introduction
•Demonstrated experience with business communication, can effectively communicate with business, technical and operational teams
•Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion.
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)
 
Job Number: CA2325
Job Location: Woodland Hills CA, CA
Per Diem: offered
Overtime: Possible
Duration: 12 ++ Months plus
Start Date: 2/3 wks from offer
Input Date: 06/10/2025
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer/ Engineer- Multiple Locations, SC

Description:
Tool Engineer 3

Location: North Charleston, SC
Duration: 12+ Months

Description:
Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Basic Qualifications (Required):
Degree and typical experience in engineering classification: Bachelor’s and 5 or more years’ experience, Master’s degree with 3 or more years’ experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Assembly Process
Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.

Computer Aided Design Tools
Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Additional Job Description:
Computer literate
Must be able to read and write training material/job material

Skill Code: 66U-Designer Engineer
 
Job Location: North Charleston, SC
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Urgent Design Engineers ( Level 2-4)

Description:
Design Engineers

Job Description: Designs major components, or major portions of a functional system, or technically advanced prototype, promotional or specific products. Develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of assemblies and details parts of devices, mechanisms, structures, and products. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

Must Have Skills:
CAD- preferably CATIA V4 or V5
Experience reading engineering drawings

Max rate by level:
Level 2- $50
Level 3- $55
Level 4- $60
 
Job Location: Fort Worth, TX
Input Date: 06/10/2025
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Electrical/Electronic Installation Design

Description:
Job Description:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.

Position Responsibilities:
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision

Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o College coursework and/or work experience with computer aided design tools and systems (e.g., computer aided design / computer aided manufacturing (CAD / CAM) software)
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience
Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o CATIA V5 experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with design, production, and build processes is a PLUS
o Communicator, working in teams

Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically < 2 years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 46540-1
Job Location: Ridley Park, PA
Rate: $46/hr
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
Back to Advanced Job Search