Job Search Results

548 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/10/28 Thursday 03:28AM Pacific Time by ContractJobHunter. )

Listings 1 - 548

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
12 Mechanical Design Engineers Needed w/Solidworks

Description:
Must have knowledge of SolidWorks as a drafting tool. The ME’s will be updating aircraft structural models based on analysis provided by Stress Engineers. Must be capable of selecting materials (from a short list of allowable aluminum alloys) appropriate to meet or exceed the required material properties defined by the stress analysis. ME will need to calculate edge and pitch distances for each fastener drawing update. Working in Oklahoma City is necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 483
Job Location: Oklahoma City, OK
Rate: $58-$65/Hr. **DOE**
Per Diem: Possible
Duration: 3-6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 07/06/2021
Last Updated: 08/26/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Mechanical / Airframe Designers Needed - NX

Description:
• Light aircraft experience modeling and drawings starting from Mylar and hand drawn.
• Must have experience with NX and TeamCenter 13
• Good communication and ability to work well in an IPT with stress, tooling, production
• Must be US Citizen


The Structures Company LLC is an AA/EOE.
 
Job Number: 492
Job Location: Vero Beach, FL
Rate: $55-$65/Hr. **DOE**
Per Diem: Yes
Overtime: NO
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/08/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

4 Mechanical Systems Design Engineers Needed

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Number: 491
Job Location: Greensboro, NC
Rate: $60-$66/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year +
Start Date: 4-6 Weeks
Input Date: 07/12/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13717

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Work with Engineering, Operations Support and individuals in other departments.
Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
Interpret basic engineering drawings, diagrams and schematics
Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
Conduct, analyze and document statistically based experiments to define process parameters
Implement and document complex solutions for process improvement
Design and construct basic tooling and fixtures to accomplish unique tasks
Organize, analyze and interpret data to identify cause/effect relationships and recommends resolution/process improvement

 What You’ll Need:

Solid knowledge and proficiency in the use of fabrication tools
Ability to fabricate complex hardware
Solid knowledge of generally accepted technical theory
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
Superior communication and collaboration skills

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

Associate’s Degree in related discipline or equivalent is required combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13717
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/16/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13718

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Work with Engineering, Operations Support and individuals in other departments.
Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment.
Interpret basic engineering drawings, diagrams and schematics
Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
Conduct, analyze and document statistically based experiments to define process parameters
Implement and document complex solutions for process improvement
Design and construct basic tooling and fixtures to accomplish unique tasks
Organize, analyze and interpret data to identify cause/effect relationships and recommends resolution/process improvement

What You’ll Need:

Solid knowledge and proficiency in the use of fabrication tools
Ability to fabricate complex hardware
Solid knowledge of generally accepted technical theory
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
Superior communication and collaboration skills

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

Associate’s Degree combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
 
Job Number: Job ID # 2021-13718
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/16/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13719

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Work with Engineering, Operations Support and individuals in other departments.
Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment.
Interpret basic engineering drawings, diagrams and schematics
Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
Conduct, analyze and document statistically based experiments to define process parameters
Implements and documents complex solutions for process improvement
Design and construct basic tooling and fixtures to accomplish unique tasks
Organize, analyze and interpret data to identify cause/effect relationships and recommends resolution/process improvement

What You’ll Need:

Solid knowledge and proficiency in the use of fabrication tools
Ability to fabricate complex hardware
Solid knowledge of generally accepted technical theory
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
Superior communication and collaboration skills

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

Associate’s Degree combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13719
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/16/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engine Control System Bench Test - Lead and Contributing Engineers

Description:
ABOUT THE JOB:
Seeking lead and contributing engineers for aerospace engine control system bench test development in support of system verification testing for a new aircraft propulsion turbine engine control unit design. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the system verification test development process.

REQUIRED SKILLS:
• Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
• 7+ years aerospace engineering experience
• Aerospace controls product experience
• System test bench verification experience
• Knowledge of ARP4754A and DO-178 certification guidelines
• Experience performing test data post processing and analysis
• Experience authoring system test plans and procedures
• Background in control system engineering and integration
• Has a disciplined requirements-based engineering approach to system verification
• Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
• Ability to manage a variety of complicated tasks, situations, and people

PREFERRED SKILLS:
• For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
• For a lead engineer role, demonstrated history of guiding small engineering teams through the systems verification process
• Propulsion or APU turbine engine control system verification test development
• Experience with Rational ClearCase, ClearQuest, and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-36 months
Start Date: ASAP
Input Date: 07/02/2021
Last Updated: 07/13/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engine LRU System Development - Lead and Contributing Engineers

Description:
ABOUT THE JOB:
Seeking lead and contributing engineers for aerospace engine LRU development for a new aircraft propulsion turbine design including engine health monitoring system and torque sensing functions. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the development process.

REQUIRED SKILLS:
• Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
• 7+ years aerospace engineering experience
• Knowledge of ARP4754A and experience with model-based system development and certification
• Effective coordination and communication with:
o Systems engineering teams
o Multi-disciplinary team members
o Internal and External project management organizations
• Experience in System requirements development
• Experience in Control system engineering and integration
• Has a disciplined requirements-based engineering approach to system design, and demonstrates the following skills:
o Requirements analysis and decomposition
o Requirements validation
o Change management
• Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
• Ability to manage a variety of complicated tasks, situations, and people

PREFERRED SKILLS:
• For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
• For a lead engineer role, demonstrated history of guiding small engineering teams through the development process
Propulsion or APU turbine engine control system development
• Engine Health Monitoring (EHM) system experience
• Torque sensing system experience
• Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
• Experience with electro-mechanical components used in control systems, and interfacing those components to a controller
• Knowledge of DO-178 certification guidelines
• Experience working with component suppliers to refine component requirements/specifications, and to develop and approve qualification plans
• Experience with Rational ClearCase, ClearQuest and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-36 months
Start Date: ASAP
Input Date: 07/02/2021
Last Updated: 07/13/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technician-Vertical Lift

Description:
Aircraft Assembly Technician-Vertical Lift

Job ID # 2021-13673

Contract Opportunity

Location: Mesa, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Follow computer based and other specific processes and systems, including manufacturing planning and blueprints, as well as other forms of both written and oral instructions.
Mechanical, electrical/avionics, sheet metal or composites work on Apache Longbow Helicopters.
Follow specific tool control, FOD (Foreign Object, Debris) control and safety guidelines and policies.

What You’ll Need:

Experience in assembly, disassembly, install, test and troubleshooting of mechanical and electrical assemblies and sub-assemblies on Apache Longbow Helicopters.
Minimum of 1 year of experience with aircraft assembly processes.
Experience reading and interpreting assembly instructions or drawings.
Preferred (Desired) Qualifications:
Prefer specific Apache Longbow knowledge in systems such as Hydraulics, Flight Controls, Rigs, Fuel, Environmental Control Systems, Avionics, Wire Harness Installation and routing, Fairings, Brakes.
A & P License preferred

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

High School Diploma/GED

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13673
Job Location: Mesa, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/08/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technicians

Description:
STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

 Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Essential Knowledge, Skills & Abilities:

Education: 

High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.

Experience: 

A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment/  Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37807
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Assembler-Vertical Lift

Description:
Aircraft Structural Assembler-Vertical Lift

Job ID # 2021-13672

Contract Opportunity

Location: Mesa, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems. Identify nonconforming parts, conditions and manufacturing processes.
Work with engineering to improve manufacturing processes.
Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment.
Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one Assembly to another as with fairings and the mating of major assemblies callouts, butt, station and water lines; blind pick up of hole locations for blank parts from existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gauges and scales.
Report all non-conformances to manufacturing supervision or corrective action representative.
Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
Report on job status and restraints to coworkers and supervision;
Identify production inefficiencies and suggests potential improvements to product or process.

What You’ll Need:

Knowledgeable and skilled in basic sheet metal, riveting, assembly methods and common shop practices.
Knowledgeable and able to interpret and work from blueprints, sketches and written and verbal instructions.
Knowledgeable and able to apply shop math.
Knowledgeable and able to use computer systems for office and shop applications.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

High School Diploma/GED

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13672
Job Location: Mesa, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/08/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures/Sheet Metal Tech

Description:
Acara Solutions is seeking qualified Structures Technicians to support our customers aviation production business in Nashville, TN:

Pay Rate: $26 - $32/hour DOE

JOB DESCRIPTION


Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM's) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before signing off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.



Working Conditions / Environment/ Special Requirements

Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 'Respirator Protection' regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required.
 
Job Number: 487368
Job Location: Nashville, TN
Rate: 26-32
Per Diem: Possible
Overtime: YES
Duration: temp to direct
Start Date: ASAP
Input Date: 07/15/2021
Firm Name: ACARA SOLUTIONS INC
Attention: Megan Tates
Address: 250 INTERNATIONAL DRIVE
P O BOX 9057

City, State: WILLIAMSVILLE, NY 14231-9057
Website: www.acarasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector (1st Shift)

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Candidate must have Airframe and Powerplant license.

Education and Experience Requirements:
1. High School graduate/GED. Airframe and Powerplant License required.
2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills.
2. Must be able to prioritize tasks.
3. Strong computer skills.
4. Must be able to work all shifts.
5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 15210
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector (2nd Shift)

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Candidate must have Airframe and Powerplant license.

Education and Experience Requirements:
1. High School graduate/GED. Airframe and Powerplant License required.
2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills.
2. Must be able to prioritize tasks.
3. Strong computer skills.
4. Must be able to work all shifts.
5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 15211
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector (Weekend Day Shift)

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Candidate must have Airframe and Powerplant license.

Education and Experience Requirements:
1. High School graduate/GED. Airframe and Powerplant License required.
2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills.
2. Must be able to prioritize tasks.
3. Strong computer skills.
4. Must be able to work all shifts.
5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 15212
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required A&P license and five years inspection.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 15529
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/08/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr. (2nd Shift)

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Have Knowledge experimental aircraft inspection and conformity.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 15329
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler

Description:
Position Overview:
Make sub-assemblies consisting of printed circuit boards with applicable components.  Assembles a completed
electro-mechanical unit utilizing sub-assemblies, air tools, and miscellaneous parts.

Major Tasks and Responsibilities:
  • Assembles printed circuit boards by insertion of applicable components in through-hole fashion utilizing specific work instructions, procedures and various hand and air tools.
  • Installs sub-assemblies, miscellaneous hardware into specific unit enclosures at a final assembly level utilizing specific work instructions, procedures and various hand and air tools.
  • Above processes include electrical function test at printed circuit board and final assembly level accomplished by utilizing test fixtures provided by electrical engineering.
  • Other duties as required (i.e. packing, etc.)


Qualifications:

  • Minimum 4+ months production work experience within a manufacturing industry.
  • An electro-mechanical aptitude is desirable.
  • Ability to work cross-functionally with individuals and teams to achieve department/production goals.
  • Strive for continuous process improvement in daily activities.
  • Ability to follow through on tasks assigned to completion.
  • Must be able to stand at work station for 8 hours.
  • Must be able to lift up to 26 lbs.


Education and Experience:

  • High school diploma/GED


Physical Requirements:
While performing the duties of this job, the employee is regularly required to stand 8 to 10 hours a day depending on shift.  Also sit, talk, hear, and walk.  The employee will frequently be required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl.  The employee must occasionally lift and/or move up to 26 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
 

 
Job Number: 2110131334
Job Location: North Kingstown, RI
Duration: 3 months
Input Date: 05/18/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Joe Coccia
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmQBQA0&URLSource=cjhunter

Assembler A

Description:
Chipton-Ross is seeking 4 Assembler A's located in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

REQUIRED EXPERIENCE:
- Computer literate
- Must be able to read, write and speak English language

Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.

Safety
Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances

Safety shoes are required.
Completely cover the toes, heels and top of your foot.
Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric,
Heels are less than 2 inches high and have heel base greater than 1 square inch.
Soles are at least " thick

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift

Assignments may require contractors to change shifts and work frequent overtime.

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 190706
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 04/19/2021
Last Updated: 10/27/2021
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler- 40717

Description:
We have an Excellent Contract to Hire position for an Assembler to join a leading Company located in the Millersville, MD area.

**Must be able to have active Secret Clearance or be able to obtain one.**

Fully proficient support individual contributors. Works under limited supervision. Maybe a resource to other employees in areas of expertise. Assignments are moderately difficult.

Essential Functions:
• Responsible for performing a wide variety of electronic or electro-mechanical assembly operations which may include skilled handwork or utilizing automated production equipment.
• Comprehends and interprets a variety of technical specifications, terms, and documents.
• Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on assembly units.
• Makes setups and adjustments holding tolerances to blueprint specifications.
• Other duties as assigned

Qualifications:
• Requires fully proficient job knowledge/skills.
• Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience.
• Secret Clearance required ** This position will be in a cleared facility and requires a clearance. All candidates must have an active clearance or be willing to obtain a Secret clearance. **
 
Job Number: 40717
Job Location: Millersville, MD
Rate: $28.00
Per Diem: NO
Overtime: YES
Duration: Temp to Hire
Start Date: ASAP
Input Date: 08/26/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Assembly Supervisor

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.


 
  Requirements
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following area: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.
  6.  Skills and Abilities Required:
  7. Strong problem solving, analytical, and technical skills.
  8. Strong oral and written communication skills.
  9. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  10. Experience implementing or being part of a Lean Manufacturing organizations.
  11. Demonstrated success in implementation of continuous improvement initiatives.
  12. Ability to read and interpret prints and engineering documents.
  13. Familiar with Microsoft Office (Power Point, Excel, and Word).
  14. Self-motivated with ability to foster moral amongst his/her team

 
Job Number: 2110131542
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 06/29/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pmx9QAC&URLSource=cjhunter

Assembly Supervisor-1st Shift

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.

  Requirements:
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following areas: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.

  Skills and Abilities Required:

  1. Strong problem solving, analytical, and technical skills.
  2. Strong oral and written communication skills.
  3. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  4. Experience implementing or being part of a Lean Manufacturing organizations.
  5. Demonstrated success in implementation of continuous improvement initiatives.
  6. Ability to read and interpret prints and engineering documents.
  7. Familiar with Microsoft Office (Power Point, Excel, and Word).
  8. Self-motivated with ability to foster moral among his/her team.

 
Job Number: 2110131461
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 07/21/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmiBQAS&URLSource=cjhunter

Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

CAD Designer Specialist

Description:
PDS Tech is seeking CAD Designer Specialists near Wilmington, MA. 

This position will be responsible for providing Design support to customer-funded programs and internal research efforts within our Intelligence, Surveillance and Reconnaissance (ISR) business units. Our intelligence, surveillance, and reconnaissance (ISR) solutions serve a broad array of government, civil and commercial customers by enhancing information superiority, contributing to our national security and providing actionable data for the protection of property and human life. We specialize in high-reliability airborne and space-based remote sensing payloads that offer active and motion imaging and data processing, exploitation, and dissemination. We also provide solutions that map and monitor the earth for a variety of commercial and governmental users.

Responsibilities:
  • Provide CAD support (Autodesk Inventor) to engineers and other designers.
  • Generate new drawings and documentation, as well as modify existing drawings and documentation.
  • Manage and control mechanical digital data files and drawings.
  • Prepare and incorporate engineering change orders.
  • Input data and manage hardware structures in a Product Data Management tool (Vault).

Qualifications:
• Associates Degree and a minimum of 8 years of prior related experience or Bachelor’s Degree and a minimum of 4 years of prior related experience, or equivalent.
• Bachelor’s Degree and a minimum of 2 years of prior related experience or 2 years post-Secondary/ Associates Degree and a minimum of 6 years of prior related experience

Preferred Additional Skills:
• Expert knowledge in 3D parametric CAD modeling and PDM systems. Experience with Inventor and Vault highly desirable.
• Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
• Knowledge of applicable government and industry standards including ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.
• Strong understanding and application of Geometric Dimensioning and Tolerancing.
• Previous experience in designing electro-optical and opto-mechanical payloads and sub-systems for aerospace & military defense applications.
• Experience in developing interfaces between spacecraft, payload systems, and sub-assemblies is highly desired.
• Previous experience in supporting the design of space structures, mechanisms, electronics packaging, and/or composite structures.
• Outstanding oral, written and presentation skills for interfacing with senior management and customers.
• DOD secret security clearance desired.

Security Clearance:
Please be aware this position requires the ability to obtain a Security Clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

 
Job Number: 2110135056
Job Location: Wilmington, MA
Duration: 6 months
Input Date: 07/19/2021
Last Updated: 10/28/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxeIQAS&URLSource=cjhunter

CREO Aircraft Structures Mechanical Engineers and Designers

Description:
Looking for CREO degreed and non degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
 
Job Number: PL CREO
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 10/01/2021
Last Updated: 10/27/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Assembler

Description:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cabinet assemblies which includes installing cables, subassemblies and circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

• One-year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electrostatic Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and cabinet assemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers
Will not get max pay rate without extensive, stable experience.
Degree not required.
Supervisor is looking for candidates who are mechanically inclined
 
Job Number: CJH-R-6056
Job Location: Clearwater, FL
Rate: $20
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Mechanical System Design Engineer-Savannah GA

Description:
Must be proficient in Catia V5 and preferably Catia V4 with Smarteam experience. Must have experience with design and electrical equipment installations or aircraft mechanical systems design. Previous aircraft modification experience is desired.


If you are interested in this contract position and would like to apply, simply send me an e-mail with your up to date resume.

davellino@advancedtechno.com
 
Job Number: GA3625
Job Location: GA
Rate: 65/70hr.
Per Diem: Available
Overtime: most likely
Duration: long term
Start Date: 2/3 wks from offer
Input Date: 05/05/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Civil/Mechanical Engineer Supervisor

Description:
AKKA Technologies (Mother Company of PDS) is currently looking for a Civil/Mechanical Supervisor  for an Energy customer in El Paso, CO.
Our customer, a multinational natural gas and electrical energy utilities company, is building a Photovoltaic Power Plant in the USA. The Civil/Mechanical Supervisor is responsible for familiarizing themselves with all aspects of the project, from structural drawings to budgets to deadlines. They also make sure all parties are doing what they are supposed to do, and they carry out visual inspections of work completed.


Responsibilities:
  • Supervise a team of Civil and Mechanical Engineers
  • Review all technical documentation provided by the EPC contractor to ensure it is in compliance with: Contract Obligations, Project Technical Specifications, Acceptable Standards, Regulations, & Project Authorizations.
  • Order changes or address unforeseen events during construction.


 



 

 




    Qualifications:
    • Bachelor Degree
    • 5+ years of Construction Experience
    • 5+ years in Solar PV Construction 

     
    Job Number: 2110132894
    Job Location: Elbert, CO
    Duration: 6 months
    Input Date: 07/21/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Scout Wonsang
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pqr4QAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Interiors, Engineer 4

    Description:
    Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

    Unique Skills:
    • Capitol Harness &/or Mentor Graphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
    • Experience with systems development, layout, and logic
    • Familiarity in mechanical system design preferred.
    • Analyze Electrical designs in 3D models preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    • Catia V5 basic navigation experience.
    • Aircraft electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-506
    Job Location: Savannah, GA
    Rate: $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/27/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Completions Mechanical Design Engineer, Completions - Eng. Contractor 4

    Description:
    Inconen is looking for a Completions Mechanical Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    Proficient in Catia V5
    Proficient in Smarteam
    Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
    Experience of routing plumbing on various monuments
    Electrical Harness Installation (EHI) experience also a plus.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15574
    Job Location: Savannah, GA
    Rate: $65.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/16/2021
    Last Updated: 10/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Manager - Level 2 / Level 3

    Description:
    Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

    Pay Range: Level 2 = $40.00 - $43.75/HR / Level 3 = $50.00 - $53.85/HR
    Schedule: 9/80

    ** Candidates must be U.S. Citizens without Dual Citizenship **
    ** This is a Hardware Configuration Management role. NOT a Software Configuration role **

    Duties:
    -Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

    -25% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
    -25% - Perform validation of manufacturing bills-of-material and their attribute data.
    -20% - Perform Contract and Supplier Data Management processing in accordance with program data requirements and statements of work.
    -15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
    -10% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
    -5% - Participate in preparation for and leadership of Configuration Control Boards.

    Skills:
    -Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
    -Experience and knowledge of PTC Windchill desired.
    -Knowledge of design, development and manufacture of mechanical and electrical systems desired.
    -Oracle ERP is highly preferred but not required.
    -Proficiency with Microsoft Office products (e.g., Word, Excel, PowerPoint) required.

    Education:
    -Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
     
    Job Number: 15242
    Job Location: Canoga Park, CA
    Rate: DOE
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 12 Mos
    Start Date: ASAP
    Input Date: 06/29/2021
    Last Updated: 08/10/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Manager - Level 2 / Level 3

    Description:
    Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

    ** Candidates must be U.S. Citizens without Dual Citizenship **
    ** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

    Duties:
    Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

    30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
    30% - Perform validation of manufacturing bills-of-material and their attribute data.
    15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
    15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
    10% - Participate in preparation for and leadership of Configuration Control Boards.

    Skills:
    -Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
    -Experience and knowledge of PTC Windchill desired.
    -Knowledge of design, development and manufacture of mechanical and electrical systems desired.
    -Oracle ERP is highly preferred but not required
    -Proficiency with Microsoft Office products (e.g. Word, Excel, PowerPoint) required.

    Education:
    -Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
     
    Job Number: 15169
    Job Location: Huntsville, AL
    Rate: $45.00 - $53.85/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 12 Mos
    Start Date: ASAP
    Input Date: 06/22/2021
    Last Updated: 08/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    CREO/Windchill Mechanical Designer (Structures)

    Description:
    Seeking Creo/Windchill Mechanical Designer (Structures):
    •Design and maintenance of structural product definition by preparing design layouts and drawings in Creo, modifying existing designs and resolving design discrepancies

    •Experience with Design for Manufacturing and Design for Assembly
    If qualified, email a WORD version copy of your resume along with your hourly pay rate and then call Peggy at 774-210-4108 to discuss. Referrals appreciated!
     
    Job Number: PL Creo Structures
    Job Location: Renton, WA
    Rate: $50-60/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6-12+ months
    Start Date: 2 weeks
    Input Date: 10/07/2021
    Last Updated: 10/27/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer-Aero Mechanisms WA-0805 July 21

    Description:
    Design Engineer - Aerospace Mechanisms - Seattle WA area - 0805

    Our client in the Seattle, WA area is a leading designer and manufacturer of specialty aircraft modifications and products, our client has several new programs and looking for great candidates to discuss direct opportunities for Design Engineers with Mechanism Experience using Solidworks or a similar CAD system


    Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada, and Europe. We have been in business 20 years in the US and 8 years in Europe.

    MECHANICAL DESIGN ENGINEER – MECHANISMS

    Solidworks or any 3D modeling software design personnel to develop aerospace mechanisms for latches, doors, etc that include the generation of models, specifications, and drawings.
    You will be responsible for designing and identifying component parameters, selecting materials, assemblies, and parts to be used for commercial aircraft
    You can demonstrate your background with mechanisms, kinematics, or structures design in the aircraft industry,
    Preparation of FAA documents and test plans; knowledge of aerospace industry materials, hardware, and processes;
    knowledge of FAA regulations;

    Qualifications:

    Bachelor's degree from a four-year college or university, or equivalent of education and experience
    Minimum of ten years of experience as a Design Engineer preferably within the aerospace industry.
    Experience in a manufacturing environment preferred, especially working with composite materials.
    Strong communication and interaction skills.
    Ability to lead continuous improvement projects and use /evaluate statistical data analysis tools during continuous improvement projects.
    Proficient in the use of Microsoft Office Suite including Word, Excel, PowerPoint, and Outlook.

    If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
     
    Job Location: Seattle, WA
    Rate: DOE
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/19/2021
    Firm Name: KELTIA DESIGN INC
    Attention: Jason Ruppert
    Address: 2333 SEA WAY BLVD STE 212
    City, State: EVERETT, WA 98203
    Phone: 206/368-9812
    Fax Phone: 206/237-8950
    Website: www.keltia-design.com

    Die Maintenance

    Description:
    Job purpose
    Responsible for die maintenance, die installation, effective evaluation and repair of dies.
    Essential Functions
    • Support equipment / die downtime in a dynamic fast-paced environment.
    • Develop and support die maintenance and improvement projects.
    • Support weekend and shutdown die issues.
    • Support training of other die associates.


    • Support of the engineering group in short / long term projects.
    • Support machine checks, preventative maintenance duties, line troubleshooting and reporting of problems and repairs;

    Additional Responsibilities

    • Performs other duties as assigned.
    • Utilizes hand tools, power tools, and hoists/cranes to repair and maintain dies and associated equipment.
    • Utilizes calipers, micrometers and other gauges to evaluate production components.
    • May be trained and assigned to operate a forklift.
    • Keeps work area clean of debris and safety hazards.
    • Complies with Safety Policies and reports unsafe conditions.
    • May be trained and assigned to perform Plant Start-up & Shutdown Procedures and Weekend/Holiday Shutdown Facilities Check.
    • Work on daily activities as assigned by the Team Leader.
    • Respond to die downtime and recovery issues.
    • Monitor dies for potential problems identification.
    • Perform quality & running efficiency improvements to the dies.
    • Perform scheduled preventative maintenance plans & activities.
    • Quality confirmation of completed work.
    • Perform zone inspections.
    • Perform all phases of die and associated troubleshooting on electrical, mechanical, hydraulic, and/or pneumatic systems including process water controls and lines


    Education, Experience and Competencies

    • High School Diploma or equivalent and a minimum of five (5) years of experience as a maintenance technician.
    • Ability to read, write, speak and understand English well.
    • Must demonstrate capability of using hand and power tools.


    • Understands safety policies, quality policy and environmental policies.
    • Has basic understanding of GD&T etc.
    • Ability to analyze die & process problems and implement repairs & countermeasures for:


    • Hydraulic cylinder issues
    • Mechanical issues
    • Ability to weld & hard finish.
    • Demonstrate solid “Troubleshooting” skills.
    • General computer/data entry skills.
    • General electrical troubleshooting.
    • General machine tool knowledge.
    • Understanding of 2D drawings.
    • Ability to be a self-starter, learn on a continual basis, train others and work well in a team atmosphere.
    • Capability to work with minimal supervision.
    • Good communication skills.
    • Basic knowledge of mechanical, electrical, hydraulic, and pneumatic functions and components.
    • Ability to demonstrate a proactive approach with die maintenance and Ability to troubleshoot.
    • Team Oriented.


    • Self-starter imitative / Drive/ Eager to learn.


     
    Job Number: 2110130144
    Job Location: Ridgeville, SC
    Duration: 6 months
    Input Date: 04/27/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Leah Swan
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pj0VQAS&URLSource=cjhunter

    Electrical & Mechanical Technician

    Description:
    PDS Tech, Inc. is seeking a Electrical & Mechanical Technician in Portland, OR.

    Overview
    The primary function of an Electrical & Mechanical Technician is to lay out, build, update, test, troubleshoot, repair, and modify developmental and production vehicle electrical systems, components and power take off accessories, including chassis and cab wiring routing & clipping and HVAC systems functionality. The expectation is that the potential candidate will have adequate skills to be able to perform mechanical repairs and preventative maintenance on the vehicles as well as need arises.

    Job Responsibilities
    • Perform work orders primarily related to electrical systems (part installs, inspections, repair, maintenance & service) on test vehicles.
    • Analyze failure modes and provide root cause analysis.  Document complaints clearly and accurately.  Contact Design engineering and other Product Validation groups to support troubleshooting & root cause evaluations
    • Document, photograph, and report all claims relative to failures, malfunctions, and/or complaints in shop work order system (ManagerPlus)
    • Support electrical system vehicle updates including but not limited to; Product Validation Requests (PVRs), engine repowers, and ground up builds
    • Diagnose issues associated with vehicle electrical system hardware, wiring & software, and update to the required electrical hardware & software versions as required.
    • Also be able to perform mechanical repairs, oil changes, preventative maintenance services, and minor/ major inspections on commercial vehicles (engine and chassis) as required.
    • Support sustaining operations by working directly with the Vehicle Engineers, Documentation team and the other shop technicians. Work closely with the test drivers, participate at the morning huddle, and provide maintenance updates.
    • Ensure vehicles are safe to operate, and the shop safety is #1 priority

    Qualifications
    • Minimum three years of experience in electrical systems repairs, maintenance and servicing of commercial vehicles is required.
    • Associates Degree or Trade School Certification in Automotive or Diesel Technology is preferred but not required
    • Solid understanding and familiarity with commercial vehicle repair & service with emphasis on, Drive Train, Cab, Chassis, Mechatronics electrical systems, including Multi-Plexing systems are required.
    • Basic understanding of the commercial vehicle Mechanical systems are required.
    • Understanding of engineering processes & their downstream impacts, as well as the ability to read and interpret engineering drawings (GDT knowledge) and electrical schematics is required.
    • Experience in commercial vehicles testing is highly desired but not a must.
    • Class A commercial Driver license is preferred.
    • Working knowledge of Heavy Duty & Medium Duty Detroit and Cummins engines and aftertreatment systems are highly desired.
    • Proficiency with Company’s computer systems including PartsPro, ViewCad and Product Validation Portal & Manager Plus is preferred.
    • Experience with standard shop equipment such as jacks, jack stands, power tools, torque wrench, HVAC machine & Hunter alignment system is preferred.
    • Experience with diagnostic tools such as ServiceLink, Cummins InSite, Drumroll, WABCO Toolbox, etc. is highly desired.
    • Candidate must have excellent verbal, written and presentation skills and be proficient with Microsoft Office Suite of products. Technical command of English language is required.
    • Potential candidate must be well organized, extremely detail oriented, ambitious, authentic, and be able to work independently and /or in team settings.
    • Has to be capable of efficiently multitasking and work under pressure.
    • Candidate has to have a convincing personality and pride in the appearance of their work environment.

     
    Job Number: 2110128528
    Job Location: Portland, OR
    Duration: 12 months
    Input Date: 07/16/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Melissa Cuellar
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PeWGQA0&URLSource=cjhunter

    Electrical Aircraft Interiors Engineer with Mentorgraphics

    Description:
    ===========================================
    Engineer Contractor 3 - Electrical Interiors in Savannah, GA
    Unique Skills:
    • Capitol Harness &/or Mentorgraphics experience
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
    • Familiarity in mechanical system design preferred.
    • Analyze Electrical designs in 3D models preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
    • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
     
    Job Number: PL Elec Interiors
    Job Location: Savannah, GA
    Rate: $60-65/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2-3 weeks
    Input Date: 03/23/2021
    Last Updated: 10/27/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    Electrical Assembler

    Description:
    Chipton-Ross is seeking an Electrical Assembler for an opening in Philadelphia, PA.


    RESPONSIBILITIES:
    Circuit Breaker/Switchgear Apparatus Assembler and Wireman
    Under general direction of supervisor, perform any assembly operation and wiring function to final completion or refurbishment on all breakers, switchgear, cradles or any related large air circuit breaker apparatus. Install, align and secure parts, sub-assemblies and other components including meters, relays, control switches, cradles, circuit breakers or any other related accessory devices.
    Use hand and portable power tools as necessary. Operate machine tools such as drill press, grinder, band saw, belt sander, or similar aids as prescribed by manufacturer's specifications.

    REQUIREMENTS:
    Minimal of 3 to 5 years of relevant experience.

    Adjust clearance and contacts for proper mechanical and electrical action using feeler gauges, fixed gauges, and similar aids.

    Make specified pilot assemblies or assembly changes.

    May be required to assist field service personnel in the repair of units.

    Utilize job orders, job cards, bills of material, service reports, parts lists, sketches, assembly and detailed drawings, schematics, wiring diagrams, standard shop practices or verbal instructions for all operations. Draw parts and materials from stock storage racks or trays. Detect and correct any electrical or mechanical defects which may cause improper operations and check own work for accuracy and completeness. May work with customers and customer inspectors. Refer all unusual conditions to supervisor. Perform other duties as assigned.

    EDUCATION:
    High School Diploma or equivalent

    SHIFT:
    Full-Time
     
    Job Number: 192370
    Job Location: Philadelphia, PA
    Rate: Up to $24.00 DOE
    Duration: 5 months
    Input Date: 07/02/2021
    Last Updated: 10/27/2021
    Firm Name: CHIPTON ROSS
    Attention: Christopher Conaway
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: cconaway@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Designer - OK - Secret Clearance

    Description:
    Electrical Designer
    Location: Oklahoma City, OK
    Hourly Rate: $40.00 - $53.00
    Duration: 6 months, possible extension
    Benefits: Per Diem available, overtime possible, medical, dental, 401K
    **Our client requires that candidates must have an active/current DoD Secret Personnel Clearance (PCL) to start, for which the U.S. Government requires U.S. Citizenship.**

    Education and Experience:
    • High school diploma or GED plus 3 or more years’ experience in electrical design, OR Associates’ degree plus 1 or more years’ experience in electrical design.
    • Electrical design using Catia V5 or NX (Unigraphics) desired.
    • U.S. Secret Security Clearance is required to start.

    Tasks and Responsibilities:
    Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers.

    Reference Number: VEVBA
     
    Job Number: 585949373
    Job Location: Oklahoma City, OK
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 07/08/2021
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: 4010 WATSON PLAZA DR STE 138
    City, State: LAKEWOOD, CA 90712
    800 Phone: 866/277-3343
    Fax Phone: 562/420-7688
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Electrical Design Engineer to provide production support and design improvements for a complex high-powered multi-channel analog transmitter used in undersea acoustic sensors.
    Responsibilities will include working with other engineers (Mechanical, Electrical, Software, Test, Manufacturing, and Quality).

    Deliverable Product
    * Experienced or desire to gain experience in troubleshooting analog/power hardware with some elements of digital hardware
    * Familiarity with troubleshooting down to the component level to identify root cause, and fishbone analysis type troubleshooting techniques
    * Expertise in reviewing test data and spotting trends suggesting anomalous performance
    * Firm understanding of electronic parts, and fundamentals of electrical engineering theory
    * Familiarity with spice modelling applications

    People
    * Desire to work closely with Program Office, Quality, manufacturing assemblers, test technicians, and field engineering to help drive product deliveries to the US Navy
    * Skilled at working within a diverse team
    * Capable of leading junior engineers in their day to day assignments
    * Capable of communicating with a broad set of disciplines including manufacturing, quality, test, engineering, team leads, program management, and senior management

    Test Systems
    * Familiarity with test systems design, reviewing electrical and mechanical drawings for test systems and test cables
    * Experienced or desire to become experienced in applications utilizing Test Stand and Labview
    * Desire to create techniques and methods to drive process improvements, and drive workmanship errors/test defects to zero
    * Familiarity with testing and driving product through ambient, vibration, and thermal test environments

    Basic Qualifications :
    Demonstrated experience in industry with
    * Proficiency with electrical engineering design experience
    * Proficiency in troubleshooting of electrical circuitry
    * Proficiency in SPICE-based circuit simulation tools.
    Must have the following experience
    * Power supply design
    * Analog Circuit Card Assembly design and analysis
    * Experience in mixed signal design & A/D conversion, as well as MATLAB experience
    Desired skills :
    The ideal candidate will have experience with:
    * Voltage regulation
    * Power conditioning
    * Designing electronics for acoustic sensors
    * Acoustic systems analysis
    * DC/DC conversion
    * Sensing and control
     
    Job Number: 58672
    Job Location: Marion, Mass
    Duration: 15 months
    Start Date: ASAP
    Input Date: 07/13/2021
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 4010 WATSON PLAZA DR STE 138
    City, State: LAKEWOOD, CA 90712
    800 Phone: 866/277-3343
    Fax Phone: 562/420-7688
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - ECU and LRU Design

    Description:
    ABOUT THE JOB:
    Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

    REQUIRED SKILLS:
    • Bachelor’s degree in Electrical Engineering
    • 5+ years Aerospace circuit design experience
    • Control systems and/or supporting component hardware design experience
    • Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
    • Experience developing hardware requirements from system requirements and managing those requirements
    • Engines/Propulsion, APU, or Flight Controls experience
    • Schematic capture
    • In-depth circuit analysis and simulation
    • DOORS proficiency
    • Effective communication skills (both verbal and written)
    • Self-motivated, accountable, detail-oriented

    PREFERRED SKILLS:
    • Engine ECU and LRU familiarity

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: TBD
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/24/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer, Completions

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    • Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    • Catia V5 experiences a preference.
    • 14 CFR 25 Subpart H - EWIS based design experience a must.
    • Completions electrical system design experience preferred.
    • Part 25 Certification experience for cabin interiors preferred.
    • Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    • Experience with power distribution, lighting, switching, and harness routing required.
    • Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly
    • Makes technical decisions and provides recommendations demonstrating leadership authority.
    • Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements
    • Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements
    • Develops standards and guides for diverse engineering activities
    • Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    • Perform other duties as assigned.
     
    Job Number: 24-488
    Job Location: Savannah, GA
    Rate: $70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/02/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro Mechanical Engineer

    Description:
    Description:
    Electro-Mechanical Engineer to perform cable harness and electronics packaging design for a missiles program starting as soon as possible.
    The engineer will be responsible for cable drawings and routing for the Seeker Wire Harness redesign.
    Responsibilities will include coordination with SME's to specify harness design and material selection and work with vendors to identify applicable components.
    Tasks will include cable design, drawing updates and release, parts and material definition.

    Mandatory:
    Must sit onsite at the facility.
    Must be USC.
    Active secret required to start.
    Familiarity with military electrical/electro-mechanical components and their selection.
    Creo.
    Windchill.
    Harness design, and drawing release process.
    Requires 5+ years of experience.
     
    Job Number: CJH-M-3199
    Job Location: Orlando, FL
    Rate: $90
    Per Diem: Yes
    Overtime: Yes
    Duration: 9 Months
    Start Date: ASAP
    Input Date: 07/15/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro Mechanical Engr Level 3

    Description:
    Indotronix is looking for an Electro-Mechanical Engineer to perform cable harness and electronics packaging design for a missiles program starting as soon as possible. The engineer will be responsible for cable drawings and routing for the Seeker Wire Harness redesign. Responsibilities will include coordination with SME's to specify harness design and material selection and work with vendors to identify applicable components. Tasks will include cable design, drawing updates and release, parts and material definition.

    Mandatory:
    • Must sit onsite at the facility.
    • Active secret required to start.
    • Familiarity with military electrical/electro-mechanical components and their selection.
    • Creo.
    • Windchill.
    • Harness design, and the LM drawing release process.
    • Requires 5+ years of experience.
     
    Job Number: CJH-99-CM
    Job Location: orlando, FL
    Rate: $90 per hour on W2
    Per Diem: split
    Overtime: Yes
    Input Date: 07/15/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Technician

    Description:
    Must have Active DOD Secret Clearance
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
    Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.
    Works from schematics, engineering drawings and written or verbal instructions.
    Operates related equipment; conducts tests and reports data in prescribed format.
    Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed.

    Requirements:
    Candidate MUST be solder certified to IPC-610 and J-STD
    Must be familiar with operation of electronic lab equipment (oscilloscope, spectrum analyzers, wave form generators etc.)
    Must be able to build cables and bread boards from engineering sketches and verbal instructions
    Must be able to troubleshoot printed circuit boards to component level
    Must have good problem solving skills
    Must be able to work independently with minimal supervision
    Must have active DOD Clearance at Secret Level
    Must have an Associate’s degree OR 5 years minimum experience.

    Desired Experience:
    Experience with underwater vehicles, torpedo and sonar electronics
    Experience with RF troubleshooting
    Experienced with MS Office
     
    Job Number: CJH-R- 5967
    Job Location: Marion, MA
    Rate: $43
    Per Diem: Yes
    Overtime: Yes
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 07/16/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Eng. Contractor 3: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15036
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 10/06/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Eng. Contractor 4: Electrical Engineer, Completions

    Description:
    Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    1) Catia V5 experiences a preference.
    2) 14 CFR 25 Subpart H - EWIS based design experience a must.
    3) Completions electrical system design experience preferred.
    4) Part 25 Certification experience for cabin interiors preferred.
    5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    6) Experience with power distribution, lighting, switching, and harness routing required.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.
    9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
    10) Makes technical decisions and provides recommendations demonstrating leadership authority.
    11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
    12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
    13) Develops standards and guides for diverse engineering activities.
    14) Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12828
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 07/22/2021
    Last Updated: 10/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Eng. Contractor 4: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15037
    Job Location: Savannah, GA
    Rate: $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 10/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Manager - Aerospace WA-1601 July 2021

    Description:
    Our client in the Seattle, WA area is a Leading FAA Certified Aerospace Repair and Service company specializing in cockpit repairs including avionics who are looking for a Manager of Engineering. This individual will develop, maintain and effectively execute development and R&D project plans in accordance with the company's strategic plan and will be responsible for production programs sustaining engineering.

    Keltia Design is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada and Europe. We have been in business for over 20 years in the US and 9 years in Europe.

    Job Types: Full-time, Contract and Permanent Positions

    Hands-on Engineering Manager Key Requirements
    • Experience in leading teams and in project management
    • Experience getting DER repairs/PMA/STC approved by the FAA
    • Experience with aircraft transparencies
    • Experience determining and articulating cost/benefit analysis of development projects
    • Experience/ability presenting to airline customers
    • This position is not just design/reverse engineering – it also is responsible for driving production/efficiency improvements

    Responsibilities:

    This individual must have a thorough understanding of the aircraft materials and structures markets and be familiar with suppliers, customers and OEWs in the Air Transport/RegionaI markets. Additional experience in General Aviation would be a plus.

    Supervise and lead engineers and/or technicians who design repairs for cockpit window structures and transparencies
    Coordinate engineering activities with manufacturing, quality, sales and marketing, and other groups within the Company, consistent with the Company's strategic goals.
    Coordinate and direct projects, making detailed plans to accomplish goals and direct the integration of technical activities.
    Monitor production for trends and implement lasting corrective actions.
    Oversee the research and development of new products and procedures.
    Hire, train, and mentor other engineers and supporting staff.
    Assign, direct, and evaluate the engineering team's work; and oversee the development and maintenance of the team's competence.

    Experience:

    BS in Aeronautical Engineering, Mechanical Engineering, or a related engineering discipline. Advanced degree preferred.
    Minimum Of 5 years engineering experience in the Aerospace MRO industry
    Extensive experience with FAA certification programs, preferably involving aircraft structures.
    Prefer Six Sigma Black Belt or equivalent certification

    Eligibility Requirement:

    Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible. This is an FAA Safety Sensitive position.

    If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
     
    Job Location: Seattle, WA
    Rate: DOE
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/19/2021
    Firm Name: KELTIA DESIGN INC
    Attention: Jason Ruppert
    Address: 2333 SEA WAY BLVD STE 212
    City, State: EVERETT, WA 98203
    Phone: 206/368-9812
    Fax Phone: 206/237-8950
    Website: www.keltia-design.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Operations Technician

    Description:
    Engineering Operations Technician – Technology Development
    Job Title: Technician Spec Sr

    Description: This Company is commercializing a new class of flow battery technology for low-cost grid-scale energy storage based on novel aqueous electrolyte solutions. We are seeking a highly motivated individual to join our Engineering Operations team in supporting the execution of the test program in Andover, MA.

    Typical responsibilities will include installation, operation, troubleshooting and disassembly of battery systems, equipment calibration & repair, inventory management and facilities support. The successful candidate will interface with chemical, mechanical and electrical engineers, battery scientists and lab technicians in driving lean initiatives and optimizing operating efficiency. The individual must be a proactive team player with keen attention to detail and flexibility to adapt to a dynamic and challenging work environment.

    Basic Qualifications:
    • High school diploma/general education degree (GED) (Associate's/Bachelor's degree in STEM field preferred) and at least 3 years laboratory experience
    • Experience with chemical handling, basic plumbing, mechanical power tools and electrical systems
    • Basic knowledge of MS Excel and MS Word
    • Ability to lift 50lbs, work on a lab floor and stand for prolonged periods of time

    Desired Skills:
    • Experience with electrochemical systems and/or chemical lab environments executing test scripts on complex systems
    • Experience following written and verbal procedures, updating laboratory SOPs and identifying areas of improvement
    • Familiarity with Lean Six Sigma principles and experience with implementation of associated tools eg 5s, Kaizen etc
    • Strong communication and organizational skills with attention to detail

    Ideal candidate will have experience in an industrial lab setting in a wet chemistry environment.
     
    Job Number: 1247
    Job Location: Andover, MA
    Rate: $25.00 - $30.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months to Start
    Start Date: ASAP
    Input Date: 07/21/2021
    Last Updated: 07/26/2021
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Kerry Moreland
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Technician 3

    Description:
    An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

    Engineering Technician 3 duties:

    * Support engineering activities such as, test, check-out, modification, fabrication and assembly of
    prototype electro mechanical systems, experimental design circuitry, or specialized test
    equipment.
    * Assemble, test, and debug test fixtures and informal test procedures.
    * Perform calibration checks on electronic instruments; troubleshoot an electronics system to
    determine cause and remedy for malfunctioning.
    * Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
    perform testing, checkout and trouble-shooting functions with minimum supervision.
    * Perform compliance testing to industry and customer-defined requirements on new and legacy
    electromechanical devices.
    * Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
    test programs, oscilloscopes, signal generators and specialized test apparatus.
    * Provide work leadership to lower level technicians.
    * Perform other duties as assigned.

    EDUCATION AND EXPERIENCE REQUIRED

    * Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
    schooling and experience required.
    * Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
    testing.
    * Aptitude and experience in board level testing and component level troubleshooting, repair, and
    rework.
    * Experience in using computer based tools and procedures to perform, document, and track
    testing.
    * Must have experience with power supplies and logic systems.
    * Excellent test and troubleshooting skills and independent judgment.
    * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
    lawfully admitted into the U.S. as a refugee or granted asylum.

    If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

     
    Job Number: 313811
    Job Location: Kirkland, wa
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 06/30/2021
    Last Updated: 09/15/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    F5 Engineering Ground Test Laboratory Technician

    Description:
    PDS Tech is seeking 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

    The Lab technician must:
    • Be capable of working from engineering drawings
    • with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
    • Be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
    • Possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
    • Possess a strong aptitude for industrial hydraulic component fabrication and assembly.
    • Be able to read and interpret engineering mechanical drawings and fluid power schematics.
    • Be able to work from elevated work platforms at various heights.
    • Be willing and able to work in inclement weather.
    • Be capable and comfortable working within a diverse team environment.
      Possess skills and aptitude to operate test facilities and data acquisition systems.


     
    Job Number: 2110131544
    Job Location: Stratford, CT
    Duration: 15 months
    Input Date: 05/21/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmxJQAS&URLSource=cjhunter

    Fabrication Specialist A

    Description:
    Chipton-Ross is seeking 10 Fabrication Specialist A's for an opening in Salt Lake City, UT.

    RESPONSIBILITIES:
    Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

    EDUCATION:
    Accredited High school diploma or GED and typically 1 or more years related experience or an equivalent combination of education and experience.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 5:00 PM
     
    Job Number: 191966
    Job Location: Salt Lake City, UT
    Rate: $DOE
    Duration: 6 Months
    Input Date: 06/15/2021
    Last Updated: 10/27/2021
    Firm Name: CHIPTON ROSS
    Attention: Cody Reposa
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: creposa@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Mechanical Design Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Unique Skills:
    • Flight Test Mechanical Design Experience Required
    • Smarteam Experience Required
    • CATIA V5 Experience Required
    • MRB Experience Preferred
    • Company Experience Preferred

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
    • Is consulted extensively by associates and others as a recognized authority within the field.
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    • Approach to problem solving balances technical product, cost and schedule.
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

    Additional Functions:
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    • Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-562
    Job Location: Savannah, GA
    Rate: $58-$62/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 07/19/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Cameron Town
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Flight Test Mechanical Design Engineer

    Description:
    Inconen is looking for a Flight Test Mechanical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Flight Test Mechanical Design Experience Required
    Smarteam Experience Required
    CATIA V5 Experience Required
    MRB Experience Preferred
    Gulfstream Experience Preferred

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15580
    Job Location: Savannah, GA
    Rate: $70.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/18/2021
    Last Updated: 10/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Gen Electro/Mech Assm Spec

    Description:
    Gen Electro/Mech Assm Spec

    Job ID # 2021-13720

    Contract Opportunity

    Location: Germantown, MD

    Industry: Aerospace & Defense

    Minimum Education: High School Diploma/GED

    Minimum Experience: 7 years

     

    What You’ll Do:

    Perform complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies.
    Perform rework, repair and modification to parts and assemblies.
    Present statistical data to team for analysis and problem resolution.
    Provide complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists.
    Coordinate with manager and other departments to coordinate work flow and resolve issues.
    Perform complex rework, repair and modification to parts and assemblies.
    Assemble and deliver kits. Performs simple receiving and inspections procedures on incoming materials.
    Document inspection results in accordance with applicable procedures.
    Coordinate with management or other departments to establish work priorities.
    Update work status documentation.
    Work under minimal supervision.
    Perform complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
    Perform complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
    Coordinate with supervisor and other departments to coordinate work flow and resolve issues.
    Coordinate with supervisor to establish work priorities.
    Work under minimal supervision.

    What You’ll Need:

    More than 5 years of experience in electronics and electro-mechanical assemblies.
    More than 5 years of experience in a manufacturing or assembly environment.
    More than 5 years of experience performing soldering and electronics repair to the component level.
    More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.
    Preferred Qualifications:
    Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.




    Education & Experience:

    High School Diploma/GED combined with 7 + years of relevant work experience; or an equivalent combination of education and experience.

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
     
    Job Number: Job ID # 2021-13720
    Job Location: Germantown, MD
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 6 Months
    Input Date: 07/16/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    HVAC Testing Technician (Temp-to-Perm)

    Description:
    PDS Tech is seeking HVAC Testing Technicians for open position in East Syracuse NY.  These are Temp-to-Perm positions.

    The ideal candidate will support delivery of maintenance and/or upgrades to existing customer-owned equipment or installation of new equipment.  They will also conduct customer training on products, services and upgraded capabilities

    SPECIFIC RESPONSIBILITIES:

    • Fabricate and assemble testing apparatuses to support testing and development of commercial HVAC products.
    • Accurately record and document test data utilizing data systems and database.
    • Perform electrical and mechanical modifications to test units and components.
    • Learn HVAC product certification standards.
    • Calibrate test equipment.
    • Troubleshoot units or instrumentation issues.

    TYPICAL EDUCATIONAL REQUIREMENTS:
    • AA/AS degree (or other 2-year post high school training) or 2 years’ relevant experience.


    KEY QUALIFICATIONS:

    • Two years HVAC or machine shop experience.
    • Good understand of basic electrical wiring.
    • Experience working with combustible and pressurized gasses.
    • Experience with basic hand and power tools, and other electrical equipment.
    • Proficiency in brazing preferred.
    • Ability to read and understand test assignments.
    • Basic skills in Microsoft Word, Excel, and Outlook
    • Ability to communicate effectively, follow oral and written instructions.
    • Ability to write clear, concise, and consistent emails.
    • Strong safety record.
    • Ability to multitask and shift priorities with very short notice.
    • Physical requirements: lift up to 50 lbs. occasionally.

     
    Job Number: 2110133529
    Job Location: East Syracuse, NY
    Duration: 5 months
    Input Date: 06/22/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PsqjQAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Handling Qualities Engineer

    Description:
    Position Responsibilities:

    Test planning, execution, and reporting on FAA flight tests for Flight Characteristics, Category-A Performance, Category-B Performance, and other related flight tests.
    Technical lead for:
    Test preparedness and planning including test plan writing
    Preparing and presenting company test data packages to the FAA
    Preflight test team briefs
    Real-time telemetered flight tests
    Post-flight team debriefs
    Test data analyses
    Final test report authoring
    Interface with other disciplines (e.g. Avionics, Powerplant, etc.) and organizations both internal and external (FAA, Bell Flight Test Engineering, etc.)

    Education Requirements:

    Major in Aerospace Engineering or Mechanical Engineering is preferred.
    Related degrees with relevant experience will be considered.

    Position Requirements:

    All years of experience will be considered, preferred at least 5+ years of relevant experience in Aerospace industry is preferred
    Must be a proven self-starter and leader requiring minimal supervision, with excellent written and oral communication skills, and computer skills
    Familiarity with the following is preferred:
    Aircraft / Helicopter flight test and supporting activities
    Flight Characteristics / Handling Qualities test and analytical experience
    FAA Part 29 or similar FAR regulations or similar military qualification
    IADS software for real-time telemetry flight test operations
    Bell’s CAFTA flight test data software system
    MathWorks MATLAB and Simulink software
    ADS-33 and other Handling Qualities specifications
    Experience with configuration management tools such as Enovia
    Flight director, navigation, autopilot and autonomous flight systems
    6 degree of freedom simulation models

    The recruiter's contact number is 469-785-4744.

    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 61567
    Job Location: Arlington, TX
    Rate: DOE
    Per Diem: possible
    Overtime: possible
    Duration: one year
    Start Date: July-Aug
    Input Date: 07/13/2021
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Becky Norman
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    Industrial Engineer - Contract - Aerospace Industry Experience a MUST

    Description:
    This Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.
    MUST have 6+ years in the aerospace/aircraft industry.

    Duties and Responsibilities:
    1. Leading process optimization efforts to address specific business requirements and to eliminate waste from assembly processes.
    2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.
    3. Implementing productivity improvements.
    4. Working with cross functional teams to develop best practice solutions.
    5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.
    6. Implementing mistake-proofing controls to maintain or improve process quality.
    7. Conducting root cause analyses to address specific process or quality problems.
    8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.
    9. Performing Time Studies to understand processes and performance metrics.
    10. Documenting processes using process mapping and value stream mapping.
    11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.
    12. Designing facility layout alternatives.

    Education, Work Experience, Certification and/or Licensure:
    Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
    Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
    Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
    CATIA and AutoCAD experience is a plus.
    Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
    Strong analytical skills coupled with a creative and open mind towards alternative methods.

    Knowledge, Skills and Abilities:
    Strong analytical and innovative skills.
    Strong work ethic.
    Ability to multitask.
    Ability to work under minimal supervision.
    Detail oriented.
    Excellent problem solving skills.
    Ability to read and interpret engineering drawing and/or specification requirements.
    Excellent communication skills, both verbal and written.
    Excellent presentation skills.
    Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
    Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Greensboro, NC
    Rate: $45-60/hr DOE
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 07/28/2021
    Last Updated: 10/27/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: ChrisSheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    Industrial Engineer - Direct Position

    Description:
    General Summary:

    The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

    Duties and Responsibilities:

    1. Leading process optimization efforts to address specific business requirements and to eliminate waste from HACI assembly processes.

    2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.

    3. Implementing productivity improvements.

    4. Working with cross functional teams to develop best practice solutions.

    5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.

    6. Implementing mistake-proofing controls to maintain or improve process quality.

    7. Conducting root cause analyses to address specific process or quality problems.

    8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.

    9. Performing Time Studies to understand processes and performance metrics.

    10. Documenting processes using process mapping and value stream mapping.

    11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.

    12. Designing facility layout alternatives.



    Education, Work Experience, Certification and/or Licensure:

    Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
    Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
    Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
    CATIA and AutoCAD experience is a plus.
    Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
    Strong analytical skills coupled with a creative and open mind towards alternative methods.
    Knowledge, Skills and Abilities:

    Strong analytical and innovative skills.
    Strong work ethic.
    Ability to multitask.
    Ability to work under minimal supervision.
    Detail oriented.
    Excellent problem solving skills.
    Ability to read and interpret engineering drawing and/or specification requirements.
    Excellent communication skills, both verbal and written.
    Excellent presentation skills.
    Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
    Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 496
    Job Location: Greensboro, NC
    Rate: $120-$140K **DOE**
    Per Diem: No
    Duration: DIRECT POSITION
    Start Date: 4-5 Weeks
    Input Date: 07/29/2021
    Last Updated: 10/27/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: Debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Integration Engineer

    Description:
    An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

    Integration Engineer 2 duties:

    * Develop and perform circuit card level and unit level testing to ensure a successful product
    delivery to customer's aircraft.
    * Develop and document test equipment to support lab testing.
    * Provide technical assistance to senior staff in support of current programs.
    * Prepare and review custom test equipment drawings and designs, using electrical and
    mechanical hardware and software, with guidance from other engineers, to enable test of
    aircraft electrical power equipment.
    * Analyze and solve a variety of technical problems through use of test data and specification
    requirements. Organize and analyze data and document results. Review results to ensure their
    accuracy and appropriateness.
    * Prepare and present technical information of limited scope for internal engineers, program
    personnel, and other internal customers.
    * Acts as an individual contributor, building stable working relationships internally through tasks
    and assignments.
    * Guide internal technicians as required in performing system integration and development tests
    and custom test equipment build.

    EDUCATION AND EXPERIENCE REQUIRED:

    * Electrical engineering background with a BSEE degree.
    * 2 plus years of experience
    * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
    lawfully admitted into the U.S. as a refugee or granted asylum.

    If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


     
    Job Number: 313425
    Job Location: Kirkland, WA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 06/24/2021
    Last Updated: 08/02/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Description

    General Summary:
    The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

    Duties and Responsibilities:
    1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
    2. Develops designs for form/fit/function to meet customer and design criteria.
    3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
    4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
    5. Makes recommendations to engineering lead/management.
    6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
    7. Ensures adherence to program schedule.
    8. Performs other duties as assigned.


    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
    2. Masters’ degree in Engineering preferred.
    3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.


    Knowledge, Skills and Abilities:
    1. Working knowledge of conceptual design development of aircraft interiors.
    2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
    3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
    4. Familiarity with 14CFR Part 23/25.
    5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
    6. Proficiency in Teamcenter (or equivalent PLM tool).
    7. Ability to work independently or within a team environment.
    8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
    9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 467
    Job Location: Greensboro, NC
    Rate: $60-$62/Hr.**DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ Year
    Start Date: 4-6 Weeks
    Input Date: 05/11/2021
    Last Updated: 07/30/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Interior Mechanical Design Engineer

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

    Proficient in Catia V5
    Proficient in Smarteam
    Experience designing aircraft Interior components, furnishings and Interior Installations required (eg: galleys, lavatories, liners, personal service units, etc)
    Experience of routing plumbing on various monuments

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 374971
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 07/16/2021
    Last Updated: 10/26/2021
    Firm Name: CTS INTERNATIONAL
    Address: 160 NW GILMAN BLVD STE 250
    City, State: ISSAQUAH, WA 98027
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Lab Technician - Maintenance

    Description:
    Overview
    Maintain, update laboratory equipment to insure continuous operation of laboratory testing.

    Assist / Perform laboratory tests, including set-up, monitoring, measurement, data collection and reporting under guidance of lab Engineers in a test laboratory. 

    Responsibilities
    Laboratory maintenance and updates.

    • Organize the calibration of the Environment lab equipment.
    • Standardize the Test Bench set-up to facilitate usage and improve maintenance.
    • Create a controlled database for all the test benches, including B.O.M, Software rev level.
    • Work with Methods & Tools (M&T) team to develop test environment solutions to enable Design & Process Validation (DV/PV)
    • Contribute to the improvement of the laboratory’s tools such as: Instruction sheets, logs, development and validation tools, process automation.
    • Minimize test cycle times.
    • Input to work instructions for test houses to enable efficient transfer of test equipment
    • Support building and implementation of robust and efficient automated test benches


    Laboratory testing

    • Realize the test (electrical, mechanical, environmental, reliability) in the standard time and in line with the instruction sheet (test specification)
    • In case of difficulty, try to solve it by him/or herself or with support if needed (team leader, validation dept manager, validation engineer, project team member…). Apply the QRQC methodology
    • Input into writing of the test report taking into account the real test conditions, use pictures for more comprehension.
    • Contribute to product problems solving, support 5W2H / PDCA.
    • Police parts logistics and correct archive the parts after test (bags, labels, boxes, pallets).
    • Coordinate planning for the planned testing and allocated resources (chambers, tools, benches,…).
    • Coordinate the specific tools needed for the validation (test specification and follow-up) whenever they are done inside or external of the company.
    • Carry out all work to comply with Quality Management System and Validation Engineering Processes e.g. ASPICE, ISO/IATF16949.
    • Execution of testing using lab equipment (using thermal chambers, IPx) as per test specification.
    • Safety focussed and dedicated to maintaining high quality standards.
    • Report testing status to the val engineer responsible on a regular basis (QRQC, 5mm…)
    • Contribute to test reports, peer-reviews of data and follow up
    • Participate in lessons learned across the various projects
    • Warranty parts traceability, storage and disposition.
    • Coordinate logistics of test racks from & to laboratory and other laboratories worldwide.
    • Track all equipment sent off site ie Tracking number to be kept on file.
    • Request RMA/DAT from Rio Bravo by provide product serial # and Qty
    • Ensure parts have identification label and Shipping data
    • Ensure all warranty information captured (VIN#, MY, Repair date, Build date, Causal part, 3C’s etc) in the tracker before shipping
    • Dispose (scrapped) the parts according to established retention time following internal and customer Procedures

    Qualifications:
    • Min 5 years’ experience and knowledge of test & validation methods in the automotive industry
    • Knowledge of automotive electronics systems
    • Proficient with MS Office / Google Suite.


    Nice to have

    • Basic knowledge in National Instruments LabVIEW and TestStand software - Certified LabVIEW
    • Basic knowledge instrumentation interfacing over PXI, PCI, USB, RS232 & GPIB
    • Basic knowledge in hardware and peripherals
    • Ability to read, analyze and interpret complex documents /schematics.
    • Basic knowledge of automotive electronics systems
    • Validation experience with knowledge of test & validation methods
    • Basic knowledge of accelerated life testing
    • Basic knowledge of IATF 16949
    • Spanish is a plus

     
    Job Number: 2110131553
    Job Location: Troy, MI
    Duration: 24 months
    Input Date: 05/24/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Melissa Cuellar
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pn2jQAC&URLSource=cjhunter

    Landing Gear Assembler (Weekend shift - Fri, Sat, Sun)

    Description:
    PDS Tech is seeking Landing Gear Assemblers for open positions in Fort Worth TX

    There are 3 shifts available
    • 1st Shift Monday - Thursday 5am – 3:30 pm
    • 2nd shift Monday – Thursday 3:20 pm – 1:50 am
    • Weekend Shift Friday – Sunday 5:00 am – 5:00 pm (36 hours)


    The ideal candidate will:

    • Conduct major and minor assembly of landing gear components, assemblies and sub-assemblies.
    • Ensure all required assembly tasks are completed in compliance with federal regulations, customer guidelines, and company policies Interface with stakeholders (i.e. engineering, planning, inspection and customer) in a professional manner
    • Adhere to predetermined shelf life procedures
    • Comply with hazardous material disposal procedures Understand and model safe work procedures
    • Be responsible for understanding, interpreting and training employees on the procedures as outlined in work instructions
    • Champion implementation of Continuous Improvement methodologies to reduce cost, improve quality and ensure on-time delivery
    • Deploy use of Lean Manufacturing
    • Demonstrate awareness and understanding of the EHS policy, procedures and management system.
    • Comply with all EH&S policies and procedures.

    These positions:
    • May require off-site work at a customer facility which may require the work to be performed outdoors
    • May require off-shift work


    Education / Certifications
    High School Diploma or GED

    Experience/Qualifications

    • Minimum of one year of mechanical assembly experience
    • Must be able to read and interpret manufacturing blueprints and other pertinent documents used for assembly of landing gear (i.e. mfg. specifications, quality documentation etc.)
    • Ability to communicate with all levels
    • Assembler must be able to work with precision tools and large mechanical equipment.

     
    Job Number: 2110130640
    Job Location: Fort Worth, TX
    Duration: 12 months
    Input Date: 06/02/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PkPyQAK&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Maintenance Technician

    Description:
    A Lead Maintenance Technician job is available with a service client in Riverside, Ca.. The individual will manage and direct the day-to-day performance of the material handling equipment supported by his/her specific team. This person's decisions can have a moderate to high-level impact on business operations. This role will be working on 1st shift 5:30AM to 2:00PM or 3rd shift 9:30 PM to 6:00 AM

    Responsibilities:

    * Lead, coordinate, and direct all functions of their report staff.
    * Perform at professional level to interpret/process more complex, less-clearly defined issues.
    * Identify and resolve complex problems.
    * Define workflows, jobs, and reporting relationships to gain optimum effectiveness.
    * Participate in development of department budgets and business plans for functional area.
    * Evaluate and recommend changes in methods or procedures within own area of responsibility.
    * Identify resource needs and will develop justification.
    * Troubleshoot and resolve complex problems.

    Requirements:
    * Associates degree, Technical degree, or equivalent experience.
    * Demonstrate and apply broad knowledge of concepts, practices, and procedures for managed work group(s) and understanding and application of supervisory approaches for work direction, motivation, performance management, and disciplinary action
    * Possess 5 years of successful experience in a directly related field and successful demonstration of position and key responsibilities as presented above.
    * Experience with Allen-Bradley or equivalent PLC controls platforms, DeviceNet, PROFIBUS, Ethernet, or equivalent network communications platform, electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics , control panels, and Servo Drives, PC controllers, dc power supplies, optical devices (i.e.,encoders, photoeyes, etc.)
    * Knowledge of automated equipment; preferably automated material handling systems, Mechanical experience, Lean Principles (4-Step Problem Solve, Kaizen, 5S, etc.) and Microsoft Office
    * Able to evaluate and analyze system/equipment performance data, perform root cause analysis, and manage resolution of design-performance issues
    * Able to gauge, identify, and implement training based on skill assessment results, manage KPIs and fault data using rack and measure, evaluate and analyze the data, and implement and direct improvement
    * Able to create reports and communication materials to track and report performance issues.
    * Demonstrate continuous improvement of maintenance and operations of MHE to the customer.

    THIS IS A CONTRACT TO HIRE POSITION

    If you are interested in this Lead Maintenance Technician job with our client in Riverside please apply via the 'apply now' link provided.

    Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com
     
    Job Number: 312598
    Job Location: Riverside, CA
    Rate: --
    Per Diem: --
    Overtime: --
    Duration: JOB-CONTRACT_TYPE
    Start Date: --
    Input Date: 07/02/2021
    Last Updated: 07/28/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Manufacturing Engineer

    Description:
    Major Purpose:

    Subject matter expert with comprehensive knowledge of job area and in-depth knowledge of project management. Manages large, complex project initiatives of substantial importance to the organization with minimal oversight or direction. Communicates within and outside of the organization to explain and influence changes to practices, processes and approaches. Makes significant improvements in processes, systems, or products. Provides input into new products/processes and implements operational plans that have measurable impact on business or functional results.

    Major Functions:

    • Directs the development of plans and activities in production area(s) to meet production goals, quality, and cost objectives.
    • Optimizes program production schedules based on product introduction, equipment efficiency, and materials supply.
    • Plans and administers program procedures and budgets.
    • Makes budgetary recommendations and at higher levels, controls capital expenditures and direct/indirect labor and is responsible for managing two or more of the following activities related to operations: manufacturing, production planning, manufacturing engineering, test, quality, or shipping/receiving/stores.
    • Develops schedules and manpower requirements for program requirements.
    • Develops, implements and analyzes manufacturing plans and projects and communicates them to internal and external customers.
    • Defines, develops and transfers manufacturing and engineering tools, strategies and systems.
    • Develops high level manufacturing strategies for specific products and processes.
    • Ability to work in a strong matrixed organization with cross functional groups/teams while meeting and exceeding set goals & metrics.
    • Cost technical and schedule performance are part of the key deliverables.
    • Actively participates with engineering project teams in order to coordinate the release of new products.
    • This role will be responsible for the transitioning of a developmental R&D program into a manufacturing production program. (Prototype to full production of complex large electro mechanical assemblies).
    • Estimates and tracks manufacturing costs and makes recommendations for tooling and process requirements of new or existing product lines.
    • Maintains records and reporting systems for coordination of manufacturing operations.
    • Up to 25-40% travel.

    Technical/Functional Skills:

    • Requires comprehensive level knowledge of job area typically obtained through advanced education combined with experience.
    • May have in-depth knowledge of project management and EVMS.
    • Requires proficiency with MS Project & Critical Path Analysis.

    Education:

    • Bachelor’s Degree and minimum 9 years of prior relevant experience.
    • Graduate Degree and a minimum of 7 years of prior related experience.
    • Active Secret clearance required.

    Preferred Qualifications:
    • FAR/DFAR knowledge would be desirable.
     
    Job Number: 61489
    Job Location: Goleta, CA
    Rate: Open
    Duration: temp to perm
    Start Date: ASAP
    Input Date: 07/09/2021
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Rich Nguyen
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    Lead Software Engineer

    Description:
    PDS Tech, Inc. is seeking a Lead Software Engineer in Wilmington, MA.

    Responsible for supporting software development activities ranging from proposal response, concept/architecture development, embedded software development (design, code, and unit test), system level integration and test, and post-delivery support requiring a deep understanding of embedded software development for complex aerospace imaging payloads.


    Essential Functions:
    • Experience with the full software development life cycle (e.g., Waterfall, Agile) from conceptualization and requirements analysis through final software verification & validation of space payload level systems and sub-systems for the aerospace and commercial communities.
    • Work with our development staff across multi-disciplined teams to develop flight-based software to support in payload hardware/software Integration & Test (I&T) activities.
    • Establish positive environment of encouragement and mentoring to team members


    Preferred Additional Skills:

    • Familiarity with LabVIEW and MatLab
    • Strong problem solving, mechanical, mathematical and geo-spatial comprehension skills.
    • Excellent oral, written and presentation skills for interfacing with customers, senior management, program management and suppliers as well as mentoring of junior engineers.
    • Ability to obtain Top Secret/SCI clearance

    Qualifications:
    • BS in Computer Science or related field, MS strongly preferred.
    • 7+ years of direct experience in the area of software development, hardware/software interfaces, and test for embedded aerospace applications.
    • Expert knowledge of embedded programming languages and concepts, such as C/C++, and object-oriented design.
    • Experience with Real-Time Operating Systems (RTOS)
    • Experience in payload I&T and ground test equipment development
    • Hands-on experience, in integrating and testing embedded processing systems to the software/hardware level.
    • Thorough understanding of modern hardware/software tools and how these may be used to improve the development process.
    • Strong ability to debug/analyze data
    • Experience with the Linux Operating System (OS)
    • Must possess a current DoD Secret or Top Secret/SCI clearance

     
    Job Number: 2110132859
    Job Location: Wilmington, MA
    Duration: 6 months
    Input Date: 06/03/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Peter Pham
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqmnQAC&URLSource=cjhunter

    MP&P Technical Analyst 3

    Description:
    Chipton-Ross is seeking 4 MP&P Technical Analyst 3's for openings in Kent, WA.

    RESPONSIBILITIES:
    Performs complex analysis and evaluation of parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications. Leads, coordinates and conducts complex analysis of failed parts and processes to reduce or eliminate future failures. Generates test plans, identifies and categorizes failure, determines root cause and documents results and recommendations. Leads the proposal, development and validation of revisions to procedures and specifications. Determines suitability of parts, materials and processes and coordinates resolution of complex issues with suppliers and customers. Supports continuous improvement of products and processes by leading the design, development, fabrication, testing, evaluation and implementation of new concepts and technology. Provides technical expertise, application knowledge and performance history to internal and external customers. Supports the training and development of others.

    Evaluates parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications. Analyzes failed parts and processes to reduce or eliminate future failures. Generates test plans, identifies and categorizes failures, determines root cause and documents results and recommendations. Proposes, develops and validates revisions to procedures and specifications. Determines suitability of parts, materials and processes. Determines suitability of parts, materials and processes and coordinates resolution of issues with suppliers and customers. Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology. Provides knowledge and technical consultation to internal and external customers.

    TECHNICAL COMPETENCIES:
    Analytical Skills (Technical)
    Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
    Design Concepts & Techniques
    Advanced knowledge of design concepts and techniques (e.g., concurrent engineering, Design for Manufacture/Assembly [DFM/A]).
    Engineering Processes
    Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics). Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business).
    Engr Knowledge/Comprehension
    Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.
    Systems Thinking
    Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.

    ADDITIONAL EXPERIENCE:
    Desired Space experience
    Mechanical assembly and aptitude
    Attention to detail

    EDUCATION:
    Accredited education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).

    TRAVEL: YES
    Possible domestic travel

    FULL TIME/FIRST SHIFT
    WORK HOURS: 5:00 AM - 1:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 192085
    Job Location: Kent, WA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 06/18/2021
    Last Updated: 10/27/2021
    Firm Name: CHIPTON ROSS
    Attention: Dan Mulvihill
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: dmulvihill@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    A Manufacturing / Quality Engineer job is currently available at Belcan in Rutland, VT. This is a full time, direct job with full benefits. Great matching candidates will have a strong & successful Manufacturing & Quality Engineering work history. You will be working onsite at our large aerospace manufacturing customer.
     
    Manufacturing / Quality Engineer job duties:
    * Support hardware production
    * Identify production issues and recommend solutions to maintain production workflow
    * Identify and recommend production cost reduction methods
    * Identify, track and recommend solutions to quality issues throughout the production process

    Qualifications:
    * At least five years of Manufacturing & Quality Engineering experience, within aerospace and in a manufacturing/shop floor
    environment
    * Ability to read blue prints and routers, GD&T knowledge
    * Braze / Heat Treat experience
    * String understanding of MRB (material review), FAIs (first article), and quality procedures (AS9100 & ISO)
    * Legal authorization to work in the US required

    Desired but not required skills:
    * Mechanical or Manufacturing Engineering Degree
     
    If you are interested in this Manufacturing / Quality Engineering job in Rutland, VT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
     
    Belcan is an equal opportunity employer. EOE/M/F/D/V
     
    Build a challenging and rewarding career with an industry leader!
     
    www.BELCAN.com

     
    Job Number: 311619
    Job Location: Rutland, VT
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/23/2021
    Last Updated: 09/28/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: AnthonyDonofrio
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    Manufacturing Engineer - Electrical

    Description:
    General Summary:

    Performs Manufacturing Engineer assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager/Assistant Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery to coordinate with other departments, outside organizations, customers, and suppliers, to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer employee, also has the ability to develop solutions for production problems relating to electrical, harnesses and avionics, manufacturing processes, and/or tooling. The employee must be highly analytical, innovative and be a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines



    Duties and Responsibilities:

    Analyze a variety of engineering data to help determine requirements to meet objectives
    Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
    Work on various product and process flow segments of developmental projects
    Conduct RCCA tests or experiments, record and evaluate data and report findings
    Responsible for process capability studies, test capability studies, & through-put rates
    Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
    Identify, and develop specifications for purchase and installation of new capital-equipment
    Work with engineers and other personnel on continuous improvement projects as required
    Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
    Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
    Promote and contribute to overall team environment
    Review and development of specifications and processes applicable to aircraft electrical systems
    Procedure documentation for assembly/fabrication/operation of new or existing components
    Evaluates/improve assembly and testing methods
    Adhere to production times, staffing requirements, and related costs on quality control and industry standards
    Assist in identifying and evaluating suppliers for new or critical processes & components
    Assist purchasing in resolving supplier technical questions, drawing and specification interpretation



    Education, Work Experience, Certification and/or Licensure:

    B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
    Minimum 8 years aerospace industry experience in electrical & avionics design evaluation, build and installation
    Strong Knowledge of industry standards, processes and specifications related to aircraft electrical systems
    Must have a strong working knowledge of the following:
    Evaluating harness designs
    Harness routing considerations
    Connector & pinning configurations
    LRU placement, orientation and mounting scheme
    Proposing design changes based on RCCA findings
    Organizing and presenting technical information to all levels of management
    Strong communication skills
    Basic CATIA V5 experience is a plus
    Strong knowledge of design/drafting practices
    Design for manufacturability
    Basic level GD&T proficiency in reading/understanding engineering drawings


    Knowledge, Skills and Abilities:

    Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
    3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of details, assemblies, and installations
    Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
    The employee may be asked to participate in activities to enhance and support production teamwork, and provide an environment for all team members to participate in continuous improvement
    The ability to read and interpret engineering drawings and/or specification requirements
    Excellent problem solving skills and the ability to work in a diverse environment
    Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
    Employee must have ability to work independently and multitask with a strong work ethic
    Time management and prioritization of assignments
    Willingness to work outside of assigned areas (mechanical systems, structures, interiors, etc.)


    The Structures Company LLC is an AA/EOE.
     
    Job Number: 484
    Job Location: Greensboro, NC
    Rate: $50-$55/Hr. **DOE**
    Per Diem: Yes
    Duration: 1 Year+
    Start Date: 4-6 Weeks
    Input Date: 08/09/2021
    Last Updated: 10/27/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: Debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    Manufacturing Engineer II

    Description:
    Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

    ** Candidates must be a U.S. Citizen or Permanent Resident **

    Unique Skills:
    Previous Gulfstream planning and/or shop floor experience preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
     
    Job Number: 15133
    Job Location: Savannah, GA
    Rate: $52.50 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/18/2021
    Last Updated: 10/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II (2nd Shift)

    Description:
    Inconen is looking for a Manufacturing Engineer II (2nd Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. This position is for 2nd shift.
    2. Previous Gulfstream shop floor experience supporting live aircraft preferred.
    3. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

    Education and Experience Requirements:
    1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Other Requirements:
    1. Proven knowledge of Lean and/or Six Sigma principles.
    2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
    4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Position Purpose:
    1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
    14. Author DRDI/DMT rework instructions to support effective corrective actions.
    15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
    16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
    6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    8. Incorporate Lean Manufacturing Methodology into existing and future processes.
    10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    12. Support all Safety, Sustainability and Ergonomic Initiatives.
    13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions:
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
     
    Job Number: 15330
    Job Location: Savannah, GA
    Rate: $52.50 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/16/2021
    Last Updated: 08/23/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II - 2nd Shift

    Description:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Unique Skills:
    • This position is for 2nd shift. Previous company shop floor experience supporting live aircraft preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

    Education and Experience Requirements:
    • Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Essential Functions:
    • Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    • Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
    • Author DRDI/DMT rework instructions to support effective corrective actions.
    • Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
    • Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    • Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    • Investigate and assist in preparing justification for equipment and facility requests.
    • Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
    • Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    • Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    • Incorporate Lean Manufacturing Methodology into existing and future processes.
    • With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    • Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    • Support all Safety, Sustainability and Ergonomic Initiatives.
    • Aid in development and maintenance of Business Continuity Plan.

    Additional Functions:
    • Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    • Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements:
    • Proven knowledge of Lean and/or Six Sigma principles.
    • Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    • Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
    • Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 24-544
    Job Location: Savannah, GA
    Rate: $52.50-55/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 05/21/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Cameron Town
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer III

    Description:
    Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Previous Gulfstream planning and shop floor experience. Advanced knowledge of SAP and Solumina required.

    Education and Experience Requirements:
    1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 4 years manufacturing engineering, planning, or related technical experience.

    Other Requirements:
    1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
    2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
    4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
    5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
    6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

    Position Purpose:
    1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
    2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings.
    6. Apply statistical methods to estimate future Manufacturing requirements.
    7. Make necessary computer inputs and generate data or reports as needed.
    8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
    9. Keep current on state-of-the-art manufacturing developments.
    10. Incorporate Lean Manufacturing Methodology into existing and future processes.
    11. Develop business case and present to management for process improvement approval.
    12. Assume the duties of the ME Group Head in his/her absence.
    13. Assign and review work of subordinate personnel.
    14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
    15. Lead/coordinate the implementation of projects between multiple orgs.
    16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
    17. Support all Safety, Sustainability and Ergonomic Initiatives.
    18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    19. Author DRDI/DMT rework instructions to support effective corrective actions.
    20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
    21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

    Additional Functions:
    1. Ensure quality policies are being practiced; make recommendations to improve quality.
    2. Perform other duties as assigned.
     
    Job Number: 15139
    Job Location: Savannah, GA
    Rate: $62.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/16/2021
    Last Updated: 10/06/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Manufacturing Engineers for Goleta or Oxnard, CA

    Description:
    Manufacturing Engineers
    Goleta, CA OR Oxnard, CA
    1 year contract
    US Citizenship REQUIRED
    Secret clearance NOT required
    Drug Test
    Background Check
    Proof of US Citizenship WILL be required

    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Ensures processes and procedures are in compliance with regulations.

    Please see managers comments:

    • Since this is a Manufacturing Engineering position, they should have a minimum of a BS in Engineering (any engineering major is fine). This is not necessarily a requirement to perform the job as a Contract Engineer, but this would be a requirement if they are successful as a contract hire and we decide to convert them to be permanent. Based on how fast we are growing, I only want to hire people on contract that have a potential of becoming a permanent employee.

    • They should have thorough mechanically / electrically oriented manufacturing engineering experience (ideally in the Aerospace industry). Some of the resumes indicate that they have ME experience, but it is in food or chemical. Also, some resumes show that they have manufacturing engineering experience as a planner, but not technical manufacturing engineering experience solving problems or responsible

    • It is also important for them to have completed a significant manufacturing engineering project, ideally one where they led a team to accomplish the individual project tasks.
    • They also need to have problem solving experience, even better to be green belt or black belt certified.

    =====
    If qualified, email a WORD version copy of your resume and then call Peggy at 774-210-4108 to discuss.
     
    Job Number: PL Mfg Goleta
    Job Location: Goleta or Oxnard, CA
    Rate: $60/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 12+ months
    Start Date: 2-3 weeks
    Input Date: 05/21/2021
    Last Updated: 10/27/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: plundie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Processes Engineer

    Description:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Unique Skills:
    • Required Reviews multi-disciplines (Structures, Electrical, Mechanical) Design Smarteam and Catia workflows from a Materials and Processes Engineering perspective.
    • Demonstrated a productive relationship communicating technical requirements and expectations with suppliers.

    Education and Experience Requirements:
    • Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
    • 18 months of related Engineering experience.
    • Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

    Essential Functions:
    • Solves typical engineering problems within assigned discipline
    • Provides technical assistance to engineering staff and contributes to completion of project milestones
    • Responsible for a complex engineering assignment, or a full project of lesser complexity
    • Follows established schedules while developing plans for engineering assignments
    • Obtains appropriate level of supervisor approvals for work accuracy and adequacy
    • Proficiently applies company/organization policies and procedures

    Additional Functions:
    • Actively works to improve daily processes, and ensures all work meets customer requirements
    Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
    Perform other duties as assigned.
    • The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    • Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    • Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    • Ability to convey technical concepts in both written and verbal formats.
    • Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    • Works under general supervision for routine tasks of minor complexity.
    • With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Number: 24-550
    Job Location: Savannah, GA
    Rate: $36-$46/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/04/2021
    Last Updated: 07/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Processes Engineer - Contractor 2

    Description:
    Inconen is looking for a Materials and Processes Engineer - Contractor 2 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Required Skills:
    1. Reviews multi-disciplines (Structures, Electrical, Mechanical) Design Smarteam and Catia workflows from a Materials and Processes Engineering perspective.
    2. Demonstrated a productive relationship communicating technical requirements and expectations with suppliers.

    Education and Experience Requirements:
    1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
    2. 18 months of related Engineering experience.
    3. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

    Position Purpose:
    1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Solves typical engineering problems within assigned discipline
    2. Provides technical assistance to engineering staff and contributes to completion of project milestones
    3. Responsible for a complex engineering assignment, or a full project of lesser complexity
    4. Follows established schedules while developing plans for engineering assignments
    5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
    6. Proficiently applies company/organization policies and procedures

    Additional Functions:
    1. Actively works to improve daily processes, and ensures all work meets customer requirements.
    2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
    3. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    4. Ability to convey technical concepts in both written and verbal formats.
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    6. Works under general supervision for routine tasks of minor complexity.
    7. With supervision/mentorship, can coordinate the activities for lower-level engineering staff.
     
    Job Number: 15392
    Job Location: Savannah, GA
    Rate: $36.00 - $46.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/04/2021
    Last Updated: 08/23/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mech Sys Design & Anlys Engr

    Description:
    Mech Sys Design & Anlys Engr

    Job ID # 2021-13751

    Contract Opportunity

    Location: Titusville, FL

    Industry: Aerospace & Defense

    Minimum Education: Bachelor’s Degree

    Minimum Experience: 14 Years

     

    What You’ll Do:

    Direct the development and documentation of large scale, complex mechanical and fluid system and thermal environment requirements to establish the system design.
    Develop new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort.
    Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
    Serve as technical consultant for disposition, corrective actions and coordination with cross-functional groups to identify/implement solutions and drive strategic improvements relative to production processes.
    Coach and mentor others.
    Work under consultative direction.

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.




    Education & Experience:

    Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 14 + years of relevant work experience; or an equivalent combination of technical education and experience. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
     
    Job Number: Job ID # 2021-13751
    Job Location: Titusville, FL
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 6 Months
    Input Date: 07/20/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mech Sys Design & Anlys Engr

    Description:
    Mech Sys Design & Anlys Engr

    Job ID # 2021-13714

    Contract Opportunity

    Location: Huntsville, AL

    Industry: Aerospace & Defense

    Minimum Clearance: Ability to Obtain Secret Clearance

    Minimum Education: Bachelor’s Degree

     

    What You’ll Do:

    Support the development and documentation of mechanical and fluid system and thermal environment.
    Support the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers.
    Perform limited detail design development and modification of mechanical and fluid system installations.
    Support team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems.
    Assist in preparing technical documents for mechanical components and systems.
    Assist in supporting proposal preparation and new business development efforts.
    Work under close supervision.

    What You’ll Need:

    2 + years must have experience utlizing Design Tool NX
    Must have an ENG Degree

    *U.S. Citizenship is required by law, regulation, executive order, or government contract.




    Education & Experience:

    Bachelor’s Degree in an Engineering classification from an accredited course of study in Engineering, Computer Science, Mathematics, Physics or Chemistry.

    What to Expect:

    Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

     

     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

     
     
    Job Number: Job ID # 2021-13714
    Job Location: Huntsville, AL
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: 6 Months
    Input Date: 07/16/2021
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Brentley Sisk
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Mech Sys Design & Anlys Engr 1

    Description:
    Chipton-Ross is seeking 4 Mech Sys Design & Anlys Engr 1's for an opportunity in Huntsville, AL.

    RESPONSIBILITIES:
    Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs limited detail design development and modification of mechanical and fluid system installations. Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under close supervision.

    REQUIRED EXPERIENCE:
    2 + years must have experience utlizing Design Tool NX
    Must have an ENG Degree

    EDUCATION:
    Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

    FULL-TIME/FIRST SHIFT
    WORK HOURS: 8:00AM-5:00PM

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    ADDITIONAL INFORMATION:
    Successfully passing and completing OJT or formal classroom training is a contingency for this assignment
     
    Job Number: 192596
    Job Location: Huntsville, AL
    Rate: $DOE
    Duration: 6 Months
    Input Date: 07/15/2021
    Last Updated: 10/27/2021
    Firm Name: CHIPTON ROSS
    Attention: Richard Barrett
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rbarrett@chiptonross.com
    Website: www.chiptonross.com

    Mechanical A&P Technicians

    Description:
    PDS Tech is seeking Mechanical A&P Technicians for open position in Coatesville PA

    The ideal candidate will troubleshoot, repair and service aircraft and engine systems, conduct installation of critical dynamic components (gear boxes, driveshafts, and rotor blades), control rods and landing gear. 

    The candidate must be able to use and interpret various types of test equipment and work from maintenance manuals and wiring diagrams.

    The candidate will be responsible for performing various inspections and appropriate maintenance documentation.  The will ensure strict compliance with the Tool Control Program and comply with and participate in the FOD program.

    An A&P license is required.
    REQUIRED SKILLS:
    • Strong communication skills - written and verbal
    • Must be detail oriented and able to multi-task
    • Strong problem solving and evaluations skills
    • Strong organizational skills
    • Must be proficient in using a computer and in Microsoft Office Programs
    • Ability to work with minimal supervision, and take direction from Lead and Manager


    EDUCATION AND EXPERIENCE:

    • High School Diploma or equivalent (required), Technical school certification and/or U.S. Military experience (preferred).
    • A&P license required
    • 3+ years of recent experience minimum; and/or industry experience working on rotorcraft


    OTHER REQUIREMENTS:

    • This is a safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol Program - screening and quarterly random selections
    • Must be a US citizen or Permanent Resident Alien
    • Must have the ability to speak, write and read in the English language
    • Be capable of working overtime and assigned shift.
    • Be capable of lifting a minimum of 25 lbs.
    • Candidates should be flexible; shift still being determined.

     
    Job Number: 2110129897
    Job Location: Coatesville, PA
    Duration: 15 months
    Input Date: 04/29/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PiOfQAK&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design

    Description:
    Must sit onsite at the facility.
    Must be USC.
    Ability to obtain clearance.
    Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
    Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
    3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).
     
    Job Number: CJH-M-3195
    Job Location: GRAND PRAIRIE, TX
    Rate: $90
    Per Diem: Yes
    Overtime: Yes
    Duration: 10 Months
    Start Date: ASAP
    Input Date: 07/15/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Responsible for the mechanical design, engineering documentation, trade studies, drawing release, GD&T and producibility for a selected program. Selected candidate will perform conceptual, detail structural design, and producibility studies, as well as lead design reviews, hardware fabrication, integration, and test phases. Extensive mechanical design experience in concept development, detail design, and hardware build and test is highly desirable. Candidate should have excellent verbal and written skills, ability to perform trade studies, interface with major suppliers on complex mechanical assemblies, and capable of working in a dynamic group supporting multiple organizations (internally and externally). Experience with precision optics is desired. Preference for experience in CREO

    Ability to obtain secret clearance
     
    Job Number: 36657
    Job Location: FL
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 07/20/2021
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Engineering 4

    Description:
    Completions Mechanical Design Engineer, Completions - Eng Contractor 4

    Unique Skills:

    • Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    • Proficient in Catia V5
    • Proficient in Smarteam
    • Experience designing aircraft Interior components, furnishings and Interior Installations required (eg: galleys, lavatories, liners, personal service units, etc)
    • Experience of routing plumbing on various monuments
    • Electrical Harness Installation (EHI) experience also a plus.


    Education and Experience Requirements:

    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 21-171982
    Job Location: GA
    Rate: $65.00 - $72.00
    Overtime: Possible
    Duration: 6 months+
    Start Date: ASAP
    Input Date: 08/24/2021
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer, Completions

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Unique Skills:
    • Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    o Proficient in Catia V5
    o Proficient in Smarteam
    o Experience designing aircraft Interior components, furnishings and Interior Installations required (eg: galleys, lavatories, liners, personal service units, etc)
    o Experience of routing plumbing on various monuments
    o Electrical Harness Installation (EHI) experience also a plus.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
    • Is consulted extensively by associates and others as a recognized authority within the field.
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    • Approach to problem solving balances technical product, cost and schedule.
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

    Additional Functions:
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    • Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-558
    Job Location: Savannah, GA
    Rate: $65-$72/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/27/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Level 3

    Description:
    Indotronix seeking an experienced Mechanical Design Engineer for a position in Grand Prairie, TX, to support Production Engineering efforts associated with a legacy missile program.
    The candidate for this position will work in a Production Program environment and support Material Review Board (MRB) type activities associated with specific missile / canister components for an international customer. The preferred candidate will be the Mechanical Engineering point of contact for the legacy program relating to Missile and Canister hardware, and will support hardware recertification and production contracts.

    The candidate will be expected to screen and evaluate failures, defects, production issues, and/or questions from the international customer and leverage engineering teams as necessary to develop viable solutions, usually in time sensitive situations.

    Other notable tasks include: Development of 3D drawing models and creation/release of 2D engineering drawings using 3D CAD Software, preferably PTC CREO-4.

    Interface development and generation of Instructional Engineering Release (IER) documents. Technical support to program suppliers for procured components.

    Collaborate / Coordinate with other Mechanical Engineering (Structures, Thermal and M&P) and technical disciplines (Electrical Engineering, Systems Engineering, Software Engineering, Product Support), Procurement (Materials and Subcontract Management), Quality Assurance, Manufacturing Engineering, Production Operations, and product line suppliers / vendors.

    Provide engineering liaison effort to support the fabrication, assembly and integration tasks associated with the product line, including auditing manufacturing work instructions, production process reviews, and attending supplier audits.

    Support product line validations (PLVs) at program suppliers and first article inspections. Review proposed mechanical related changes from the US production team and assess the impacts/applicability to the International program. Interface with customers, a multi-functional team (Engineering, Configuration Management, Global Supply Chain, Contracts, Program Management, Manufacturing, International Trade and Compliance) in a fast-paced dynamic environment to support production and meet program commitments.

    Travel to support and provide technical assistance to existing / new suppliers, support hardware fabrication, assembly, integration, and testing activities in CAMDEN, Arkansas, and provide on-site support to the programs international customer.

    Mandatory skills:

    Must sit onsite at the facility.
    Must be USC.
    Ability to obtain clearance.
    Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
    Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
    3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).

    Desired:

    Exposure to Geometric Dimensioning and Tolerancing (GD&T). Experience with detail, assembly, and installation type 2D drawings. Knowledge of manufacturing and manufacturing processes. Knowledge of mechanical drawing standards. The candidate should have experience with Material Review Board (MRB) type experience, where disposition of discrepancy reports will be required by engineering. Knowledge of Microsoft Office software (Excel, Word, and PowerPoint). Knowledge of Agile PLM (for 2D drawing release).
     
    Job Number: JPC - 101777
    Job Location: Grand Prairie, TX
    Rate: $90 per hour on W2
    Per Diem: Split
    Overtime: Allowed
    Duration: 10+ months
    Start Date: ASAP
    Input Date: 07/16/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Level 3

    Description:
    Indotronix seeks an experienced Mechanical Design Engineer for a position in Grand Prairie, TX, to support Production Engineering efforts associated with a legacy missile program.
    The candidate for this position will work in a Production Program environment and support Material Review Board (MRB) type activities associated with specific missile / canister components for an international customer.
    The preferred candidate will be the Mechanical Engineering point of contact for the legacy program relating to Missile and Canister hardware, and will support hardware recertification and production contracts.
    The candidate will be expected to screen and evaluate failures, defects, production issues, and/or questions from the international customer and leverage engineering teams as necessary to develop viable solutions, usually in time sensitive situations.
    Other notable tasks include:
    Development of 3D drawing models and creation/release of 2D engineering drawings using 3D CAD Software, preferably PTC CREO-4.
    Interface development and generation of Instructional Engineering Release (IER) documents. Technical support to program suppliers for procured components. Collaborate / Coordinate with other Mechanical Engineering (Structures, Thermal and M&P) and technical disciplines (Electrical Engineering, Systems Engineering, Software Engineering, Product Support), Procurement (Materials and Subcontract Management), Quality Assurance, Manufacturing Engineering, Production Operations, and product line suppliers / vendors.
    Provide engineering liaison effort to support the fabrication, assembly and integration tasks associated with the product line, including auditing manufacturing work instructions, production process reviews, and attending supplier audits.
    Support product line validations (PLVs) at program suppliers and first article inspections. Review proposed mechanical related changes from the US production team and assess the impacts/applicability to the International program.
    Interface with customers, a multi-functional team (Engineering, Configuration Management, Global Supply Chain, Contracts, Program Management, Manufacturing, International Trade and Compliance) in a fast-paced dynamic environment to support production and meet program commitments.
    Travel to support and provide technical assistance to existing / new suppliers, support hardware fabrication, assembly, integration, and testing activities in CAMDEN, Arkansas, and provide on-site support to the programs international customer.

    Mandatory skills:
    • Must sit onsite at the facility.
    • Ability to obtain secret clearance.
    • Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
    • Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
    • 3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).

    Desired skills:
    • Exposure to Geometric Dimensioning and Tolerancing (GD&T).
    • Experience with detail, assembly, and installation type 2D drawings Knowledge of manufacturing and manufacturing processes.
    • Knowledge of mechanical drawing standards.
    • The candidate should have experience with Material Review Board (MRB) type experience, where disposition of discrepancy reports will be required by engineering.
    • Knowledge of Microsoft Office software (Excel, Word, and PowerPoint).
    • Knowledge of Agile PLM (for 2D drawing release).
     
    Job Number: CJH-088
    Job Location: Grand Prairie, TX
    Rate: $90 per hour on W2
    Per Diem: split
    Overtime: allowed
    Input Date: 07/15/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Design Engineer 4

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Unique Skills:
    • Mechanical Systems Design Engineering experience with Smarteam / CATIA v5

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
    • Is consulted extensively by associates and others as a recognized authority within the field.
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    • Approach to problem solving balances technical product, cost and schedule.
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

    Additional Functions:
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
    .
     
    Job Number: 24-560
    Job Location: Savannah, GA
    Rate: $58-$62/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/27/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Systems Engineer 4

    Description:
    Inconen is looking for a Mechanical Design Systems Engineer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    Mechanical Systems Design Engineering experience with Smarteam / CATIA v5

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15575
    Job Location: Savannah, GA
    Rate: $58.00 - $62.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/16/2021
    Last Updated: 09/13/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Mechanical Designer

    Description:
    Automation, robotics, and Inventor
     
    Job Location: Pittsburgh, PA
    Input Date: 11/23/2020
    Firm Name: BELCAN TECHSERVICES
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Email: bcampbell@belcan.com
    Website: www.belcan.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Southeast
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    With sustaining experience
     
    Job Location: Midwest
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Midwest
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers BSME -- Pro/E

    Description:
    2000 hours Pro/E
     
    Job Location: CT/IN/FL/OR
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Systems Design Engineers

    Description:
    Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
    1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
    2. Performs trade studies to identify optimal engineering solution.
    3. Collaborates with the Integrated Product Team to resolve cross functional issues.
    4. Reviews work performed by others and ensure work is to the highest standard.
    5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    6. Have the ability to understand and apply certification requirements.
    7. Implement design solutions optimized for cost and weight.
    8. Manages task execution to ensure on-time and on-target completion.
    9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
    10. Searches for problem root cause and develop corrective action plans and solutions.
    11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
    12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

    Education, Work Experience, Certification and/or Licensure:

    1. BS in Mechanical Engineering with 10-15 years directly related experience
    1. OR MS / MBA with 8-13 years of experience
    2. OR 18-23 years directly related experience
    2. Some Travel will be required


    Knowledge, Skills and Abilities:
    1. Proficient in use of CATIA Version 5.
    2. Advanced knowledge of drafting rules.
    3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
    4. Proficient in Microsoft Office Products.
    5. Use of Team Center.
    6. Familiar with FAR Part 23 or Part 25.
    7. Functional knowledge of SAP.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Greensboro, NC
    Rate: $60-66/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1-year+
    Start Date: ASAP
    Input Date: 10/27/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: ChrisSheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    Structures Systems Designer

    Description:
    Inconen is looking for a Structures Systems Designer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Qualified candidates will have:
    - Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion)
    - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
    - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies

    Preferred candidates will also have:
    - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
    - Proficiency in SmarTeam PLM database
    - Prior work experience with Gulfstream aircraft design

    Responsibilities include:
    - Maintain type design definition of the aircraft by producing the form, fit, and function documentation
    - Engage various engineering, manufacturing and product support teams to complete designs
    - Participate in design reviews
    - Prepare engineering reports and presentations
    - Mentoring to junior engineers when required

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15576
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/10/2021
    Last Updated: 10/27/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Mechanical Systems Designer Engineer

    Description:
    PDS is seeking a Mechanical Systems Designer Engineer for open positions in Savannah, GA

    Position Purpose
    :
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.



     


     

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     



     Unique skills: Required. Qualified candidates will have: - Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion) - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA) - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies Preferred candidates will also have: - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros - Proficiency in SmarTeam PLM database - Prior work experience with Gulfstream aircraft design Responsibilities include: - Maintain type design definition of the aircraft by producing the form, fit, and function documentation - Engage various engineering, manufacturing and product support teams to complete designs - Participate in design reviews - Prepare engineering reports and presentations - Mentoring to junior engineers when required

    Qualified candidates will have: - Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion) - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA) - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies Preferred candidates will also have: - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros - Proficiency in SmarTeam PLM database - Prior work experience with Gulfstream aircraft design Responsibilities include: - Maintain type design definition of the aircraft by producing the form, fit, and function documentation - Engage various engineering, manufacturing and product support teams to complete designs - Participate in design reviews - Prepare engineering reports and presentations - Mentoring to junior engineers when required





    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2.The level of technical skill and abilities appropriate for this grade will be established by each discipline



     

     


     
    Job Number: 2110135131
    Job Location: Savannah, GA
    Per Diem: No
    Duration: 6 months
    Input Date: 07/08/2021
    Last Updated: 10/28/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxotQAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical engineer Level 4

    Description:
    Mechanical Engineer needed to Lead a multi-discipline team responsible for further development-of and make production ready a replacement coating system. The position will report directly to program management providing status and directing the team to balance technical needs and maintain schedule. The candidate will not only lead the team but also provide technical direction and review/approve changes related to M+P.

    The assignment will be to lead the activities (and staff) to mature and productionize the replacement coating. The assignment includes but is not limited to:

    • Lead multi-discipline team/report to JASSM management.
    • Lead activities to productionize coating
    • Work with Planning to maintain IMS on track
    • Validate Coating
    • Qualify Coating to Production Requirements
    • Lead coating of hardware activities
    • Lead Pole Model Activities (new process validation/qualification)
    • Work with Production Operations and Low Observable (LO) engineers to define Robot sprayers requirements
    • Assist with classified finish kit drawings

    Mandatory skills:

    Must be USC.
    Must be able to sit onsite at facility.
    Active secret required to start.
    Minimum 10 years experience working as a Materials and Process Engineer.
    A strong foundation in Materials and Processing (M+P) is required for this effort.
    Bachelor's Degree from an accredited college in a Material Science and or Mechanical Engineering or related discipline.
    Familiarity with aerospace materials, processes, and LO coatings -Prior experience with leading a team and overseeing large material validation, process development, and testing efforts.
    Demonstrated strong problem solving and analytical skills.
    Excellent English writing and verbal communication skills.
     
    Job Number: CJH-JPC - 01725
    Job Location: Orlando, FL
    Rate: $95 per hour on W2
    Per Diem: split
    Overtime: allowed
    Input Date: 07/15/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 745/473-1137
    Website: www.iic.com

    Mechanical or Manufacturing Engineers

    Description:
    Project management or overhaul experience
     
    Job Location: West
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Onsite Construction Manager

    Description:
    AKKA Technologies (Mother Company of PDS) is currently looking for a Onsite Construction Manager for an Energy customer in El Paso, CO.
    Our customer, a multinational natural gas and electrical energy utilities company, is building a Photovoltaic Power Plant in the USA. The Onsite Construction Manager will oversee onsite construction, commissioning, and start up oversight.

    Responsibilities:
    • Ensure that construction is carried out according to the approved design, schedule, budget and contractual obligations
    • Provide on site support for any unforeseen events during construction
    • Site supervision will include the following
      • Civil/Mechanical Engineering Supervision  
      • Electrical Engineering (LV, MV, and HV) Supervision  
      • Communication / SCASA Supervision  
      • QA/QC Supervision  
      • Health Safety & Environment Supervision  



     



     

     




      Qualifications:
      • Bachelor Degree
      • 8+ years of Construction Experience
      • 5+ years in Solar PV Construction 

       
      Job Number: 2110132888
      Job Location: Elbert, CO
      Duration: 6 months
      Input Date: 06/11/2021
      Last Updated: 10/28/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Scout Wonsang
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqqaQAC&URLSource=cjhunter

      Onsite Construction Manager

      Description:
      AKKA Technologies (Mother Company of PDS) is currently looking for a Onsite Construction Manager for an Energy customer in Fayette, TX.
      Our customer, a multinational natural gas and electrical energy utilities company, is building a Photovoltaic Power Plant in the USA. The Onsite Construction Manager will oversee onsite construction, commissioning, and start up oversight.

      Responsibilities:
      • Ensure that construction is carried out according to the approved design, schedule, budget and contractual obligations
      • Provide on site support for any unforeseen events during construction
      • Site supervision will include the following
        • Civil/Mechanical Engineering Supervision  
        • Electrical Engineering (LV, MV, and HV) Supervision  
        • Communication / SCASA Supervision  
        • QA/QC Supervision  
        • Health Safety & Environment Supervision  



       



       

       




        Qualifications:
        • Bachelor Degree
        • 8+ years of Construction Experience
        • 5+ years in Solar PV Construction 

         
        Job Number: 2110132890
        Job Location: Ellinger, TX
        Duration: 6 months
        Input Date: 07/21/2021
        Last Updated: 10/28/2021
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Scout Wonsang
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqqkQAC&URLSource=cjhunter

        Paint Equipment Design Engineer

        Description:
        A Paint Equipment Design Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for driving development and continuous improvement of equipment, paint process and standards with the Paint Shop. To be considered for this role, you will have a Bachelor's degree in Industrial, Mechanical, or Electrical Engineering plus a minimum of 3 years of experience in a technical engineering role.

        Paint Equipment Design Engineer Job duties:

        * Perform root cause analysis on equipment bad actors and major unplanned downtime. Develop and implement solutions using problem solving analysis such 8D and several other tools.

        * Work in a team of engineers and technicians as an in-house integration team that scopes and executes projects from concept through to start-up and commissioning.
        * Become subject matter expert on all equipment - mechanical, electrical, instrumentation and controls - and train other engineers and technicians in the paint shop.
        * Takes initiative to create, implement and improve PM documents and schedules, under the direction of the maintenance management.
        * Perform major equipment repairs and rebuilds, (some weekends and holidays required).

        Qualifications:

        * Knowledge on paint processes and robot programming (Durr equipment is a plus).
        * Skilled with the use of a variety of hand and portable tools, as well as general machining and welding.
        * Able to read and interpret mechanical drawings and electrical schematics.
        * Willing to perform shift work (nights) and overtime as required.

        If you are interested in this Paint Equipment Design Engineer position in Fremont, CA please apply via the 'apply now' link provided.
        Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

         
        Job Number: 308796
        Job Location: Fremont, CA
        Rate: