Job Search Results

548 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 12:28PM Pacific Time by ContractJobHunter. )

Listings 1 - 548

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Mechanical / Structural Design Engineers Needed w/Solidworks

Description:
Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, or other related discipline
6 or more years of Primary Airframe structural design experience.
Practical knowledge of engineering principles and practices
Must have familiarity with Solidworks.
Must be US Citizens
Experience in the Aerospace and Defense Industry
Enovia/PLM experience
Understanding of applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

The Structures Company LLC is an AA/EOE.
 
Job Number: 483
Job Location: Englewood/Centennial, CO
Rate: $55-$75/Hr. **DOE**
Per Diem: Yes
Overtime: No
Duration: Long-term
Start Date: ASAP
Input Date: 08/11/2022
Last Updated: 11/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Mechanical / Airframe Designers Needed - NX

Description:
• Light aircraft experience modeling and drawings starting from Mylar and hand drawn.
• Must have experience with NX and TeamCenter 13
• Good communication and ability to work well in an IPT with stress, tooling, production
• Must be US Citizen


The Structures Company LLC is an AA/EOE.
 
Job Number: 492
Job Location: Vero Beach, FL
Rate: $55-$65/Hr. **DOE**
Per Diem: Yes
Overtime: NO
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/08/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 06/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Mechanical Systems Design Engineers Needed

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Number: 491
Job Location: Greensboro, NC
Rate: $60-$66/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year +
Start Date: 4-6 Weeks
Input Date: 07/12/2021
Last Updated: 06/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/14/2022
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 02/08/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engine Control System Bench Test - Lead and Contributing Engineers

Description:
ABOUT THE JOB:
Seeking lead and contributing engineers for aerospace engine control system bench test development in support of system verification testing for a new aircraft propulsion turbine engine control unit design. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the system verification test development process.

REQUIRED SKILLS:
• Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
• 7+ years aerospace engineering experience
• Aerospace controls product experience
• System test bench verification experience
• Knowledge of ARP4754A and DO-178 certification guidelines
• Experience performing test data post processing and analysis
• Experience authoring system test plans and procedures
• Background in control system engineering and integration
• Has a disciplined requirements-based engineering approach to system verification
• Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
• Ability to manage a variety of complicated tasks, situations, and people

PREFERRED SKILLS:
• For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
• For a lead engineer role, demonstrated history of guiding small engineering teams through the systems verification process
• Propulsion or APU turbine engine control system verification test development
• Experience with Rational ClearCase, ClearQuest, and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-36 months
Start Date: ASAP
Input Date: 07/02/2021
Last Updated: 07/13/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engine LRU System Development - Lead and Contributing Engineers

Description:
ABOUT THE JOB:
Seeking lead and contributing engineers for aerospace engine LRU development for a new aircraft propulsion turbine design including engine health monitoring system and torque sensing functions. The successful lead engineer candidate has exceptional technical skills and a demonstrated history of guiding small engineering teams through the development process.

REQUIRED SKILLS:
• Bachelor's or higher degree in a relevant engineering field - mechanical, electrical, systems, aerospace, software, etc.
• 7+ years aerospace engineering experience
• Knowledge of ARP4754A and experience with model-based system development and certification
• Effective coordination and communication with:
o Systems engineering teams
o Multi-disciplinary team members
o Internal and External project management organizations
• Experience in System requirements development
• Experience in Control system engineering and integration
• Has a disciplined requirements-based engineering approach to system design, and demonstrates the following skills:
o Requirements analysis and decomposition
o Requirements validation
o Change management
• Individuals who are self-motivated, able to work with little supervision, and who consistently take the initiative to get things done
• Ability to manage a variety of complicated tasks, situations, and people

PREFERRED SKILLS:
• For a lead engineer role, strong technical leadership, capable of providing guidance and oversight
• For a lead engineer role, demonstrated history of guiding small engineering teams through the development process
Propulsion or APU turbine engine control system development
• Engine Health Monitoring (EHM) system experience
• Torque sensing system experience
• Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
• Experience with electro-mechanical components used in control systems, and interfacing those components to a controller
• Knowledge of DO-178 certification guidelines
• Experience working with component suppliers to refine component requirements/specifications, and to develop and approve qualification plans
• Experience with Rational ClearCase, ClearQuest and DOORS

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-36 months
Start Date: ASAP
Input Date: 07/02/2021
Last Updated: 07/13/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technicians

Description:
STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

 Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Essential Knowledge, Skills & Abilities:

Education: 

High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.

Experience: 

A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment/  Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37807
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures/Sheet Metal Tech

Description:
Acara Solutions is seeking qualified Structures Technicians to support our customers aviation production business in Nashville, TN:

Pay Rate: $26 - $32/hour DOE

JOB DESCRIPTION


Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM's) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before signing off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.



Working Conditions / Environment/ Special Requirements

Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 'Respirator Protection' regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required.
 
Job Number: 487368
Job Location: Nashville, TN
Rate: 26-32
Per Diem: Possible
Overtime: YES
Duration: temp to direct
Start Date: ASAP
Input Date: 07/15/2021
Firm Name: ACARA SOLUTIONS INC
Attention: Megan Tates
Address: 250 INTERNATIONAL DRIVE
P O BOX 9057

City, State: WILLIAMSVILLE, NY 14231-9057
Website: www.acarasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector (1st Shift)

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Candidate must have Airframe and Powerplant license.

Education and Experience Requirements:
1. High School graduate/GED. Airframe and Powerplant License required.
2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills.
2. Must be able to prioritize tasks.
3. Strong computer skills.
4. Must be able to work all shifts.
5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 15210
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector (2nd Shift)

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Candidate must have Airframe and Powerplant license.

Education and Experience Requirements:
1. High School graduate/GED. Airframe and Powerplant License required.
2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills.
2. Must be able to prioritize tasks.
3. Strong computer skills.
4. Must be able to work all shifts.
5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 15211
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector (Weekend Day Shift)

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Candidate must have Airframe and Powerplant license.

Education and Experience Requirements:
1. High School graduate/GED. Airframe and Powerplant License required.
2. Four (4) years aircraft inspection experience on large/mid-size aircraft.
3. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
4. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
1. The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills.
2. Must be able to prioritize tasks.
3. Strong computer skills.
4. Must be able to work all shifts.
5. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 15212
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required A&P license and five years inspection.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 15529
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/08/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr. (2nd Shift)

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Have Knowledge experimental aircraft inspection and conformity.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 15329
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 07/27/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler- 40717

Description:
We have an Excellent Contract to Hire position for an Assembler to join a leading Company located in the Millersville, MD area.

**Must be able to have active Secret Clearance or be able to obtain one.**

Fully proficient support individual contributors. Works under limited supervision. Maybe a resource to other employees in areas of expertise. Assignments are moderately difficult.

Essential Functions:
• Responsible for performing a wide variety of electronic or electro-mechanical assembly operations which may include skilled handwork or utilizing automated production equipment.
• Comprehends and interprets a variety of technical specifications, terms, and documents.
• Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on assembly units.
• Makes setups and adjustments holding tolerances to blueprint specifications.
• Other duties as assigned

Qualifications:
• Requires fully proficient job knowledge/skills.
• Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience.
• Secret Clearance required ** This position will be in a cleared facility and requires a clearance. All candidates must have an active clearance or be willing to obtain a Secret clearance. **
 
Job Number: 40717
Job Location: Millersville, MD
Rate: $28.00
Per Diem: NO
Overtime: YES
Duration: Temp to Hire
Start Date: ASAP
Input Date: 08/26/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO REMOTE Aircraft Structures Mechanical Engineers and Designers

Description:
Looking for CREO degreed and non-degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
 
Job Number: PL CREO
Job Location: REMOTE, REMOTE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 01/26/2022
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Assembler

Description:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cabinet assemblies which includes installing cables, subassemblies and circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

• One-year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electrostatic Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and cabinet assemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers
Will not get max pay rate without extensive, stable experience.
Degree not required.
Supervisor is looking for candidates who are mechanically inclined
 
Job Number: CJH-R-6056
Job Location: Clearwater, FL
Rate: $20
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Mechanical System Design Engineer-Savannah GA

Description:
Must be proficient in Catia V5 and preferably Catia V4 with Smarteam experience. Must have experience with design and electrical equipment installations or aircraft mechanical systems design. Previous aircraft modification experience is desired.


If you are interested in this contract position and would like to apply, simply send me an e-mail with your up to date resume.

davellino@advancedtechno.com
 
Job Number: GA3625
Job Location: GA
Rate: 65/70hr.
Per Diem: Available
Overtime: most likely
Duration: long term
Start Date: 2/3 wks from offer
Input Date: 05/05/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Interiors, Engineer 4

Description:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Unique Skills:
• Capitol Harness &/or Mentor Graphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
• Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
• Catia V5 basic navigation experience.
• Aircraft electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-506
Job Location: Savannah, GA
Rate: $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/15/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Mechanical Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
Proficient in Catia V5
Proficient in Smarteam
Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
Experience of routing plumbing on various monuments
Electrical Harness Installation (EHI) experience also a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15574
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 02/24/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager - Level 2 / Level 3

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Pay Range: Level 2 = $40.00 - $43.75/HR / Level 3 = $50.00 - $53.85/HR
Schedule: 9/80

** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Hardware Configuration Management role. NOT a Software Configuration role **

Duties:
-Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

-25% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
-25% - Perform validation of manufacturing bills-of-material and their attribute data.
-20% - Perform Contract and Supplier Data Management processing in accordance with program data requirements and statements of work.
-15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
-10% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
-5% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required.
-Proficiency with Microsoft Office products (e.g., Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 15242
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/29/2021
Last Updated: 08/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager - Level 2 / Level 3

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

Duties:
Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
30% - Perform validation of manufacturing bills-of-material and their attribute data.
15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
10% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required
-Proficiency with Microsoft Office products (e.g. Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 15169
Job Location: Huntsville, AL
Rate: $45.00 - $53.85/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/22/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO/Windchill Mechanical Designer (Structures)

Description:
Seeking Creo/Windchill Mechanical Designer (Structures):
•Design and maintenance of structural product definition by preparing design layouts and drawings in Creo, modifying existing designs and resolving design discrepancies

•Experience with Design for Manufacturing and Design for Assembly
 
Job Number: PL Creo Structures
Job Location: Renton, WA
Rate: $50-60/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2 weeks
Input Date: 04/27/2022
Last Updated: 06/03/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Susan Clark
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer-Aero Mechanisms WA-0805 July 21

Description:
Design Engineer - Aerospace Mechanisms - Seattle WA area - 0805

Our client in the Seattle, WA area is a leading designer and manufacturer of specialty aircraft modifications and products, our client has several new programs and looking for great candidates to discuss direct opportunities for Design Engineers with Mechanism Experience using Solidworks or a similar CAD system


Keltia is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada, and Europe. We have been in business 20 years in the US and 8 years in Europe.

MECHANICAL DESIGN ENGINEER – MECHANISMS

Solidworks or any 3D modeling software design personnel to develop aerospace mechanisms for latches, doors, etc that include the generation of models, specifications, and drawings.
You will be responsible for designing and identifying component parameters, selecting materials, assemblies, and parts to be used for commercial aircraft
You can demonstrate your background with mechanisms, kinematics, or structures design in the aircraft industry,
Preparation of FAA documents and test plans; knowledge of aerospace industry materials, hardware, and processes;
knowledge of FAA regulations;

Qualifications:

Bachelor's degree from a four-year college or university, or equivalent of education and experience
Minimum of ten years of experience as a Design Engineer preferably within the aerospace industry.
Experience in a manufacturing environment preferred, especially working with composite materials.
Strong communication and interaction skills.
Ability to lead continuous improvement projects and use /evaluate statistical data analysis tools during continuous improvement projects.
Proficient in the use of Microsoft Office Suite including Word, Excel, PowerPoint, and Outlook.

If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
 
Job Location: Seattle, WA
Rate: DOE
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/19/2021
Firm Name: KELTIA DESIGN INC
Attention: Jason Ruppert
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Aircraft Interiors Engineer with Mentorgraphics

Description:
===========================================
Engineer Contractor 3 - Electrical Interiors in Savannah, GA
Unique Skills:
• Capitol Harness &/or Mentorgraphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: PL Elec Interiors
Job Location: Savannah, GA
Rate: $60-65/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/23/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer - OK - Secret Clearance

Description:
Electrical Designer
Location: Oklahoma City, OK
Hourly Rate: $40.00 - $53.00
Duration: 6 months, possible extension
Benefits: Per Diem available, overtime possible, medical, dental, 401K
**Our client requires that candidates must have an active/current DoD Secret Personnel Clearance (PCL) to start, for which the U.S. Government requires U.S. Citizenship.**

Education and Experience:
• High school diploma or GED plus 3 or more years’ experience in electrical design, OR Associates’ degree plus 1 or more years’ experience in electrical design.
• Electrical design using Catia V5 or NX (Unigraphics) desired.
• U.S. Secret Security Clearance is required to start.

Tasks and Responsibilities:
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers.

Reference Number: VEVBA
 
Job Number: 585949373
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/08/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Design Engineer to provide production support and design improvements for a complex high-powered multi-channel analog transmitter used in undersea acoustic sensors.
Responsibilities will include working with other engineers (Mechanical, Electrical, Software, Test, Manufacturing, and Quality).

Deliverable Product
* Experienced or desire to gain experience in troubleshooting analog/power hardware with some elements of digital hardware
* Familiarity with troubleshooting down to the component level to identify root cause, and fishbone analysis type troubleshooting techniques
* Expertise in reviewing test data and spotting trends suggesting anomalous performance
* Firm understanding of electronic parts, and fundamentals of electrical engineering theory
* Familiarity with spice modelling applications

People
* Desire to work closely with Program Office, Quality, manufacturing assemblers, test technicians, and field engineering to help drive product deliveries to the US Navy
* Skilled at working within a diverse team
* Capable of leading junior engineers in their day to day assignments
* Capable of communicating with a broad set of disciplines including manufacturing, quality, test, engineering, team leads, program management, and senior management

Test Systems
* Familiarity with test systems design, reviewing electrical and mechanical drawings for test systems and test cables
* Experienced or desire to become experienced in applications utilizing Test Stand and Labview
* Desire to create techniques and methods to drive process improvements, and drive workmanship errors/test defects to zero
* Familiarity with testing and driving product through ambient, vibration, and thermal test environments

Basic Qualifications :
Demonstrated experience in industry with
* Proficiency with electrical engineering design experience
* Proficiency in troubleshooting of electrical circuitry
* Proficiency in SPICE-based circuit simulation tools.
Must have the following experience
* Power supply design
* Analog Circuit Card Assembly design and analysis
* Experience in mixed signal design & A/D conversion, as well as MATLAB experience
Desired skills :
The ideal candidate will have experience with:
* Voltage regulation
* Power conditioning
* Designing electronics for acoustic sensors
* Acoustic systems analysis
* DC/DC conversion
* Sensing and control
 
Job Number: 58672
Job Location: Marion, Mass
Duration: 15 months
Start Date: ASAP
Input Date: 07/13/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - ECU and LRU Design

Description:
ABOUT THE JOB:
Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 5+ years Aerospace circuit design experience
• Control systems and/or supporting component hardware design experience
• Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
• Experience developing hardware requirements from system requirements and managing those requirements
• Engines/Propulsion, APU, or Flight Controls experience
• Schematic capture
• In-depth circuit analysis and simulation
• DOORS proficiency
• Effective communication skills (both verbal and written)
• Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:
• Engine ECU and LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Completions

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
• Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
• Catia V5 experiences a preference.
• 14 CFR 25 Subpart H - EWIS based design experience a must.
• Completions electrical system design experience preferred.
• Part 25 Certification experience for cabin interiors preferred.
• Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
• Experience with power distribution, lighting, switching, and harness routing required.
• Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
• Familiarity with aircraft STC procedures preferred.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly
• Makes technical decisions and provides recommendations demonstrating leadership authority.
• Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements
• Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements
• Develops standards and guides for diverse engineering activities
• Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
 
Job Number: 24-488
Job Location: Savannah, GA
Rate: $70/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/02/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro Mechanical Engineer

Description:
Description:
Electro-Mechanical Engineer to perform cable harness and electronics packaging design for a missiles program starting as soon as possible.
The engineer will be responsible for cable drawings and routing for the Seeker Wire Harness redesign.
Responsibilities will include coordination with SME's to specify harness design and material selection and work with vendors to identify applicable components.
Tasks will include cable design, drawing updates and release, parts and material definition.

Mandatory:
Must sit onsite at the facility.
Must be USC.
Active secret required to start.
Familiarity with military electrical/electro-mechanical components and their selection.
Creo.
Windchill.
Harness design, and drawing release process.
Requires 5+ years of experience.
 
Job Number: CJH-M-3199
Job Location: Orlando, FL
Rate: $90
Per Diem: Yes
Overtime: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro Mechanical Engr Level 3

Description:
Indotronix is looking for an Electro-Mechanical Engineer to perform cable harness and electronics packaging design for a missiles program starting as soon as possible. The engineer will be responsible for cable drawings and routing for the Seeker Wire Harness redesign. Responsibilities will include coordination with SME's to specify harness design and material selection and work with vendors to identify applicable components. Tasks will include cable design, drawing updates and release, parts and material definition.

Mandatory:
• Must sit onsite at the facility.
• Active secret required to start.
• Familiarity with military electrical/electro-mechanical components and their selection.
• Creo.
• Windchill.
• Harness design, and the LM drawing release process.
• Requires 5+ years of experience.
 
Job Number: CJH-99-CM
Job Location: orlando, FL
Rate: $90 per hour on W2
Per Diem: split
Overtime: Yes
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Must have Active DOD Secret Clearance
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.
Works from schematics, engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed.

Requirements:
Candidate MUST be solder certified to IPC-610 and J-STD
Must be familiar with operation of electronic lab equipment (oscilloscope, spectrum analyzers, wave form generators etc.)
Must be able to build cables and bread boards from engineering sketches and verbal instructions
Must be able to troubleshoot printed circuit boards to component level
Must have good problem solving skills
Must be able to work independently with minimal supervision
Must have active DOD Clearance at Secret Level
Must have an Associate’s degree OR 5 years minimum experience.

Desired Experience:
Experience with underwater vehicles, torpedo and sonar electronics
Experience with RF troubleshooting
Experienced with MS Office
 
Job Number: CJH-R- 5967
Job Location: Marion, MA
Rate: $43
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 3: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15036
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Electrical Engineer, Completions

Description:
Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
1) Catia V5 experiences a preference.
2) 14 CFR 25 Subpart H - EWIS based design experience a must.
3) Completions electrical system design experience preferred.
4) Part 25 Certification experience for cabin interiors preferred.
5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6) Experience with power distribution, lighting, switching, and harness routing required.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.
9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
10) Makes technical decisions and provides recommendations demonstrating leadership authority.
11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
13) Develops standards and guides for diverse engineering activities.
14) Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12828
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15037
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Manager - Aerospace WA-1601 July 2021

Description:
Our client in the Seattle, WA area is a Leading FAA Certified Aerospace Repair and Service company specializing in cockpit repairs including avionics who are looking for a Manager of Engineering. This individual will develop, maintain and effectively execute development and R&D project plans in accordance with the company's strategic plan and will be responsible for production programs sustaining engineering.

Keltia Design is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada and Europe. We have been in business for over 20 years in the US and 9 years in Europe.

Job Types: Full-time, Contract and Permanent Positions

Hands-on Engineering Manager Key Requirements
• Experience in leading teams and in project management
• Experience getting DER repairs/PMA/STC approved by the FAA
• Experience with aircraft transparencies
• Experience determining and articulating cost/benefit analysis of development projects
• Experience/ability presenting to airline customers
• This position is not just design/reverse engineering – it also is responsible for driving production/efficiency improvements

Responsibilities:

This individual must have a thorough understanding of the aircraft materials and structures markets and be familiar with suppliers, customers and OEWs in the Air Transport/RegionaI markets. Additional experience in General Aviation would be a plus.

Supervise and lead engineers and/or technicians who design repairs for cockpit window structures and transparencies
Coordinate engineering activities with manufacturing, quality, sales and marketing, and other groups within the Company, consistent with the Company's strategic goals.
Coordinate and direct projects, making detailed plans to accomplish goals and direct the integration of technical activities.
Monitor production for trends and implement lasting corrective actions.
Oversee the research and development of new products and procedures.
Hire, train, and mentor other engineers and supporting staff.
Assign, direct, and evaluate the engineering team's work; and oversee the development and maintenance of the team's competence.

Experience:

BS in Aeronautical Engineering, Mechanical Engineering, or a related engineering discipline. Advanced degree preferred.
Minimum Of 5 years engineering experience in the Aerospace MRO industry
Extensive experience with FAA certification programs, preferably involving aircraft structures.
Prefer Six Sigma Black Belt or equivalent certification

Eligibility Requirement:

Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible. This is an FAA Safety Sensitive position.

If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
 
Job Location: Seattle, WA
Rate: DOE
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/19/2021
Firm Name: KELTIA DESIGN INC
Attention: Jason Ruppert
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Operations Technician

Description:
Engineering Operations Technician – Technology Development
Job Title: Technician Spec Sr

Description: This Company is commercializing a new class of flow battery technology for low-cost grid-scale energy storage based on novel aqueous electrolyte solutions. We are seeking a highly motivated individual to join our Engineering Operations team in supporting the execution of the test program in Andover, MA.

Typical responsibilities will include installation, operation, troubleshooting and disassembly of battery systems, equipment calibration & repair, inventory management and facilities support. The successful candidate will interface with chemical, mechanical and electrical engineers, battery scientists and lab technicians in driving lean initiatives and optimizing operating efficiency. The individual must be a proactive team player with keen attention to detail and flexibility to adapt to a dynamic and challenging work environment.

Basic Qualifications:
• High school diploma/general education degree (GED) (Associate's/Bachelor's degree in STEM field preferred) and at least 3 years laboratory experience
• Experience with chemical handling, basic plumbing, mechanical power tools and electrical systems
• Basic knowledge of MS Excel and MS Word
• Ability to lift 50lbs, work on a lab floor and stand for prolonged periods of time

Desired Skills:
• Experience with electrochemical systems and/or chemical lab environments executing test scripts on complex systems
• Experience following written and verbal procedures, updating laboratory SOPs and identifying areas of improvement
• Familiarity with Lean Six Sigma principles and experience with implementation of associated tools eg 5s, Kaizen etc
• Strong communication and organizational skills with attention to detail

Ideal candidate will have experience in an industrial lab setting in a wet chemistry environment.
 
Job Number: 1247
Job Location: Andover, MA
Rate: $25.00 - $30.00
Per Diem: Possible
Overtime: Possible
Duration: 6 Months to Start
Start Date: ASAP
Input Date: 07/21/2021
Last Updated: 07/26/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 3

Description:
An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

Engineering Technician 3 duties:

* Support engineering activities such as, test, check-out, modification, fabrication and assembly of
prototype electro mechanical systems, experimental design circuitry, or specialized test
equipment.
* Assemble, test, and debug test fixtures and informal test procedures.
* Perform calibration checks on electronic instruments; troubleshoot an electronics system to
determine cause and remedy for malfunctioning.
* Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
perform testing, checkout and trouble-shooting functions with minimum supervision.
* Perform compliance testing to industry and customer-defined requirements on new and legacy
electromechanical devices.
* Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
test programs, oscilloscopes, signal generators and specialized test apparatus.
* Provide work leadership to lower level technicians.
* Perform other duties as assigned.

EDUCATION AND EXPERIENCE REQUIRED

* Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
schooling and experience required.
* Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
testing.
* Aptitude and experience in board level testing and component level troubleshooting, repair, and
rework.
* Experience in using computer based tools and procedures to perform, document, and track
testing.
* Must have experience with power supplies and logic systems.
* Excellent test and troubleshooting skills and independent judgment.
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313811
Job Location: Kirkland, wa
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/30/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Flight Test Mechanical Design Experience Required
• Smarteam Experience Required
• CATIA V5 Experience Required
• MRB Experience Preferred
• Company Experience Preferred

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field.
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule.
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-562
Job Location: Savannah, GA
Rate: $58-$62/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 07/19/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Inconen is looking for a Flight Test Mechanical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Experience Required
MRB Experience Preferred
Gulfstream Experience Preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15580
Job Location: Savannah, GA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 12/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities Engineer

Description:
Position Responsibilities:

Test planning, execution, and reporting on FAA flight tests for Flight Characteristics, Category-A Performance, Category-B Performance, and other related flight tests.
Technical lead for:
Test preparedness and planning including test plan writing
Preparing and presenting company test data packages to the FAA
Preflight test team briefs
Real-time telemetered flight tests
Post-flight team debriefs
Test data analyses
Final test report authoring
Interface with other disciplines (e.g. Avionics, Powerplant, etc.) and organizations both internal and external (FAA, Bell Flight Test Engineering, etc.)

Education Requirements:

Major in Aerospace Engineering or Mechanical Engineering is preferred.
Related degrees with relevant experience will be considered.

Position Requirements:

All years of experience will be considered, preferred at least 5+ years of relevant experience in Aerospace industry is preferred
Must be a proven self-starter and leader requiring minimal supervision, with excellent written and oral communication skills, and computer skills
Familiarity with the following is preferred:
Aircraft / Helicopter flight test and supporting activities
Flight Characteristics / Handling Qualities test and analytical experience
FAA Part 29 or similar FAR regulations or similar military qualification
IADS software for real-time telemetry flight test operations
Bell’s CAFTA flight test data software system
MathWorks MATLAB and Simulink software
ADS-33 and other Handling Qualities specifications
Experience with configuration management tools such as Enovia
Flight director, navigation, autopilot and autonomous flight systems
6 degree of freedom simulation models

The recruiter's contact number is 469-785-4744.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61567
Job Location: Arlington, TX
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: one year
Start Date: July-Aug
Input Date: 07/13/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Contract - Aerospace Industry Experience a MUST

Description:
This Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.
MUST have 6+ years in the aerospace/aircraft industry.

Duties and Responsibilities:
1. Leading process optimization efforts to address specific business requirements and to eliminate waste from assembly processes.
2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.
3. Implementing productivity improvements.
4. Working with cross functional teams to develop best practice solutions.
5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.
6. Implementing mistake-proofing controls to maintain or improve process quality.
7. Conducting root cause analyses to address specific process or quality problems.
8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.
9. Performing Time Studies to understand processes and performance metrics.
10. Documenting processes using process mapping and value stream mapping.
11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.
12. Designing facility layout alternatives.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
CATIA and AutoCAD experience is a plus.
Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
Strong analytical skills coupled with a creative and open mind towards alternative methods.

Knowledge, Skills and Abilities:
Strong analytical and innovative skills.
Strong work ethic.
Ability to multitask.
Ability to work under minimal supervision.
Detail oriented.
Excellent problem solving skills.
Ability to read and interpret engineering drawing and/or specification requirements.
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: $45-60/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/28/2021
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Direct Position

Description:
General Summary:

The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:

1. Leading process optimization efforts to address specific business requirements and to eliminate waste from HACI assembly processes.

2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.

3. Implementing productivity improvements.

4. Working with cross functional teams to develop best practice solutions.

5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.

6. Implementing mistake-proofing controls to maintain or improve process quality.

7. Conducting root cause analyses to address specific process or quality problems.

8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.

9. Performing Time Studies to understand processes and performance metrics.

10. Documenting processes using process mapping and value stream mapping.

11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.

12. Designing facility layout alternatives.



Education, Work Experience, Certification and/or Licensure:

Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
CATIA and AutoCAD experience is a plus.
Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
Strong analytical skills coupled with a creative and open mind towards alternative methods.
Knowledge, Skills and Abilities:

Strong analytical and innovative skills.
Strong work ethic.
Ability to multitask.
Ability to work under minimal supervision.
Detail oriented.
Excellent problem solving skills.
Ability to read and interpret engineering drawing and/or specification requirements.
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

The Structures Company LLC is an AA/EOE.
 
Job Number: 496
Job Location: Greensboro, NC
Rate: $120-$140K **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-5 Weeks
Input Date: 07/29/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer

Description:
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

Integration Engineer 2 duties:

* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.

EDUCATION AND EXPERIENCE REQUIRED:

* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 313425
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/24/2021
Last Updated: 08/02/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Description

General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.


Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.


Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company LLC is an AA/EOE.
 
Job Number: 467
Job Location: Greensboro, NC
Rate: $60-$62/Hr.**DOE**
Per Diem: Yes
Overtime: Possible
Duration: 1+ Year
Start Date: 4-6 Weeks
Input Date: 05/11/2021
Last Updated: 07/30/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Maintenance Technician

Description:
A Lead Maintenance Technician job is available with a service client in Riverside, Ca.. The individual will manage and direct the day-to-day performance of the material handling equipment supported by his/her specific team. This person's decisions can have a moderate to high-level impact on business operations. This role will be working on 1st shift 5:30AM to 2:00PM or 3rd shift 9:30 PM to 6:00 AM

Responsibilities:

* Lead, coordinate, and direct all functions of their report staff.
* Perform at professional level to interpret/process more complex, less-clearly defined issues.
* Identify and resolve complex problems.
* Define workflows, jobs, and reporting relationships to gain optimum effectiveness.
* Participate in development of department budgets and business plans for functional area.
* Evaluate and recommend changes in methods or procedures within own area of responsibility.
* Identify resource needs and will develop justification.
* Troubleshoot and resolve complex problems.

Requirements:
* Associates degree, Technical degree, or equivalent experience.
* Demonstrate and apply broad knowledge of concepts, practices, and procedures for managed work group(s) and understanding and application of supervisory approaches for work direction, motivation, performance management, and disciplinary action
* Possess 5 years of successful experience in a directly related field and successful demonstration of position and key responsibilities as presented above.
* Experience with Allen-Bradley or equivalent PLC controls platforms, DeviceNet, PROFIBUS, Ethernet, or equivalent network communications platform, electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics , control panels, and Servo Drives, PC controllers, dc power supplies, optical devices (i.e.,encoders, photoeyes, etc.)
* Knowledge of automated equipment; preferably automated material handling systems, Mechanical experience, Lean Principles (4-Step Problem Solve, Kaizen, 5S, etc.) and Microsoft Office
* Able to evaluate and analyze system/equipment performance data, perform root cause analysis, and manage resolution of design-performance issues
* Able to gauge, identify, and implement training based on skill assessment results, manage KPIs and fault data using rack and measure, evaluate and analyze the data, and implement and direct improvement
* Able to create reports and communication materials to track and report performance issues.
* Demonstrate continuous improvement of maintenance and operations of MHE to the customer.

THIS IS A CONTRACT TO HIRE POSITION

If you are interested in this Lead Maintenance Technician job with our client in Riverside please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com
 
Job Number: 312598
Job Location: Riverside, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/02/2021
Last Updated: 07/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Manufacturing Engineer

Description:
Major Purpose:

Subject matter expert with comprehensive knowledge of job area and in-depth knowledge of project management. Manages large, complex project initiatives of substantial importance to the organization with minimal oversight or direction. Communicates within and outside of the organization to explain and influence changes to practices, processes and approaches. Makes significant improvements in processes, systems, or products. Provides input into new products/processes and implements operational plans that have measurable impact on business or functional results.

Major Functions:

• Directs the development of plans and activities in production area(s) to meet production goals, quality, and cost objectives.
• Optimizes program production schedules based on product introduction, equipment efficiency, and materials supply.
• Plans and administers program procedures and budgets.
• Makes budgetary recommendations and at higher levels, controls capital expenditures and direct/indirect labor and is responsible for managing two or more of the following activities related to operations: manufacturing, production planning, manufacturing engineering, test, quality, or shipping/receiving/stores.
• Develops schedules and manpower requirements for program requirements.
• Develops, implements and analyzes manufacturing plans and projects and communicates them to internal and external customers.
• Defines, develops and transfers manufacturing and engineering tools, strategies and systems.
• Develops high level manufacturing strategies for specific products and processes.
• Ability to work in a strong matrixed organization with cross functional groups/teams while meeting and exceeding set goals & metrics.
• Cost technical and schedule performance are part of the key deliverables.
• Actively participates with engineering project teams in order to coordinate the release of new products.
• This role will be responsible for the transitioning of a developmental R&D program into a manufacturing production program. (Prototype to full production of complex large electro mechanical assemblies).
• Estimates and tracks manufacturing costs and makes recommendations for tooling and process requirements of new or existing product lines.
• Maintains records and reporting systems for coordination of manufacturing operations.
• Up to 25-40% travel.

Technical/Functional Skills:

• Requires comprehensive level knowledge of job area typically obtained through advanced education combined with experience.
• May have in-depth knowledge of project management and EVMS.
• Requires proficiency with MS Project & Critical Path Analysis.

Education:

• Bachelor’s Degree and minimum 9 years of prior relevant experience.
• Graduate Degree and a minimum of 7 years of prior related experience.
• Active Secret clearance required.

Preferred Qualifications:
• FAR/DFAR knowledge would be desirable.
 
Job Number: 61489
Job Location: Goleta, CA
Rate: Open
Duration: temp to perm
Start Date: ASAP
Input Date: 07/09/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
A Manufacturing / Quality Engineer job is currently available at Belcan in Rutland, VT. This is a full time, direct job with full benefits. Great matching candidates will have a strong & successful Manufacturing & Quality Engineering work history. You will be working onsite at our large aerospace manufacturing customer.
 
Manufacturing / Quality Engineer job duties:
* Support hardware production
* Identify production issues and recommend solutions to maintain production workflow
* Identify and recommend production cost reduction methods
* Identify, track and recommend solutions to quality issues throughout the production process

Qualifications:
* At least five years of Manufacturing & Quality Engineering experience, within aerospace and in a manufacturing/shop floor
environment
* Ability to read blue prints and routers, GD&T knowledge
* Braze / Heat Treat experience
* String understanding of MRB (material review), FAIs (first article), and quality procedures (AS9100 & ISO)
* Legal authorization to work in the US required

Desired but not required skills:
* Mechanical or Manufacturing Engineering Degree
 
If you are interested in this Manufacturing / Quality Engineering job in Rutland, VT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
www.BELCAN.com

 
Job Number: 311619
Job Location: Rutland, VT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/23/2021
Last Updated: 09/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Electrical

Description:
General Summary:

Performs Manufacturing Engineer assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager/Assistant Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery to coordinate with other departments, outside organizations, customers, and suppliers, to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer employee, also has the ability to develop solutions for production problems relating to electrical, harnesses and avionics, manufacturing processes, and/or tooling. The employee must be highly analytical, innovative and be a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines



Duties and Responsibilities:

Analyze a variety of engineering data to help determine requirements to meet objectives
Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
Work on various product and process flow segments of developmental projects
Conduct RCCA tests or experiments, record and evaluate data and report findings
Responsible for process capability studies, test capability studies, & through-put rates
Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
Identify, and develop specifications for purchase and installation of new capital-equipment
Work with engineers and other personnel on continuous improvement projects as required
Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
Promote and contribute to overall team environment
Review and development of specifications and processes applicable to aircraft electrical systems
Procedure documentation for assembly/fabrication/operation of new or existing components
Evaluates/improve assembly and testing methods
Adhere to production times, staffing requirements, and related costs on quality control and industry standards
Assist in identifying and evaluating suppliers for new or critical processes & components
Assist purchasing in resolving supplier technical questions, drawing and specification interpretation



Education, Work Experience, Certification and/or Licensure:

B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
Minimum 8 years aerospace industry experience in electrical & avionics design evaluation, build and installation
Strong Knowledge of industry standards, processes and specifications related to aircraft electrical systems
Must have a strong working knowledge of the following:
Evaluating harness designs
Harness routing considerations
Connector & pinning configurations
LRU placement, orientation and mounting scheme
Proposing design changes based on RCCA findings
Organizing and presenting technical information to all levels of management
Strong communication skills
Basic CATIA V5 experience is a plus
Strong knowledge of design/drafting practices
Design for manufacturability
Basic level GD&T proficiency in reading/understanding engineering drawings


Knowledge, Skills and Abilities:

Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of details, assemblies, and installations
Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
The employee may be asked to participate in activities to enhance and support production teamwork, and provide an environment for all team members to participate in continuous improvement
The ability to read and interpret engineering drawings and/or specification requirements
Excellent problem solving skills and the ability to work in a diverse environment
Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
Employee must have ability to work independently and multitask with a strong work ethic
Time management and prioritization of assignments
Willingness to work outside of assigned areas (mechanical systems, structures, interiors, etc.)


The Structures Company LLC is an AA/EOE.
 
Job Number: 484
Job Location: Greensboro, NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year+
Start Date: 4-6 Weeks
Input Date: 08/09/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
Previous Gulfstream planning and/or shop floor experience preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15133
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (2nd Shift)

Description:
Inconen is looking for a Manufacturing Engineer II (2nd Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. This position is for 2nd shift.
2. Previous Gulfstream shop floor experience supporting live aircraft preferred.
3. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15330
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 08/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2nd Shift

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• This position is for 2nd shift. Previous company shop floor experience supporting live aircraft preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-544
Job Location: Savannah, GA
Rate: $52.50-55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 05/21/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Previous Gulfstream planning and shop floor experience. Advanced knowledge of SAP and Solumina required.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 15139
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineers for Goleta or Oxnard, CA

Description:
Manufacturing Engineers
Goleta, CA OR Oxnard, CA
1 year contract
US Citizenship REQUIRED
Secret clearance NOT required
Drug Test
Background Check
Proof of US Citizenship WILL be required

Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Ensures processes and procedures are in compliance with regulations.

Please see managers comments:

• Since this is a Manufacturing Engineering position, they should have a minimum of a BS in Engineering (any engineering major is fine). This is not necessarily a requirement to perform the job as a Contract Engineer, but this would be a requirement if they are successful as a contract hire and we decide to convert them to be permanent. Based on how fast we are growing, I only want to hire people on contract that have a potential of becoming a permanent employee.

• They should have thorough mechanically / electrically oriented manufacturing engineering experience (ideally in the Aerospace industry). Some of the resumes indicate that they have ME experience, but it is in food or chemical. Also, some resumes show that they have manufacturing engineering experience as a planner, but not technical manufacturing engineering experience solving problems or responsible

• It is also important for them to have completed a significant manufacturing engineering project, ideally one where they led a team to accomplish the individual project tasks.
• They also need to have problem solving experience, even better to be green belt or black belt certified.

=====
If qualified, email a WORD version copy of your resume and then call Peggy at 774-210-4108 to discuss.
 
Job Number: PL Mfg Goleta
Job Location: Goleta or Oxnard, CA
Rate: $60/per hour
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 2-3 weeks
Input Date: 05/21/2021
Last Updated: 01/26/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Unique Skills:
• Required Reviews multi-disciplines (Structures, Electrical, Mechanical) Design Smarteam and Catia workflows from a Materials and Processes Engineering perspective.
• Demonstrated a productive relationship communicating technical requirements and expectations with suppliers.

Education and Experience Requirements:
• Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
• 18 months of related Engineering experience.
• Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Essential Functions:
• Solves typical engineering problems within assigned discipline
• Provides technical assistance to engineering staff and contributes to completion of project milestones
• Responsible for a complex engineering assignment, or a full project of lesser complexity
• Follows established schedules while developing plans for engineering assignments
• Obtains appropriate level of supervisor approvals for work accuracy and adequacy
• Proficiently applies company/organization policies and procedures

Additional Functions:
• Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.
• The level of technical skills and abilities appropriate for this grade will be established by each discipline.
• Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
• Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
• Ability to convey technical concepts in both written and verbal formats.
• Contacts are primarily within the organization, with occasional customer contacts on routine issues.
• Works under general supervision for routine tasks of minor complexity.
• With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 24-550
Job Location: Savannah, GA
Rate: $36-$46/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/04/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer - Contractor 2

Description:
Inconen is looking for a Materials and Processes Engineer - Contractor 2 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Required Skills:
1. Reviews multi-disciplines (Structures, Electrical, Mechanical) Design Smarteam and Catia workflows from a Materials and Processes Engineering perspective.
2. Demonstrated a productive relationship communicating technical requirements and expectations with suppliers.

Education and Experience Requirements:
1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
2. 18 months of related Engineering experience.
3. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Solves typical engineering problems within assigned discipline
2. Provides technical assistance to engineering staff and contributes to completion of project milestones
3. Responsible for a complex engineering assignment, or a full project of lesser complexity
4. Follows established schedules while developing plans for engineering assignments
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
3. Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower-level engineering staff.
 
Job Number: 15392
Job Location: Savannah, GA
Rate: $36.00 - $46.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/04/2021
Last Updated: 08/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design

Description:
Must sit onsite at the facility.
Must be USC.
Ability to obtain clearance.
Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).
 
Job Number: CJH-M-3195
Job Location: GRAND PRAIRIE, TX
Rate: $90
Per Diem: Yes
Overtime: Yes
Duration: 10 Months
Start Date: ASAP
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Responsible for the mechanical design, engineering documentation, trade studies, drawing release, GD&T and producibility for a selected program. Selected candidate will perform conceptual, detail structural design, and producibility studies, as well as lead design reviews, hardware fabrication, integration, and test phases. Extensive mechanical design experience in concept development, detail design, and hardware build and test is highly desirable. Candidate should have excellent verbal and written skills, ability to perform trade studies, interface with major suppliers on complex mechanical assemblies, and capable of working in a dynamic group supporting multiple organizations (internally and externally). Experience with precision optics is desired. Preference for experience in CREO

Ability to obtain secret clearance
 
Job Number: 36657
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 07/20/2021
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Engineering 4

Description:
Completions Mechanical Design Engineer, Completions - Eng Contractor 4

Unique Skills:

• Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
• Proficient in Catia V5
• Proficient in Smarteam
• Experience designing aircraft Interior components, furnishings and Interior Installations required (eg: galleys, lavatories, liners, personal service units, etc)
• Experience of routing plumbing on various monuments
• Electrical Harness Installation (EHI) experience also a plus.


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 21-171982
Job Location: GA
Rate: $65.00 - $72.00
Overtime: Possible
Duration: 6 months+
Start Date: ASAP
Input Date: 08/24/2021
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer, Completions

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
o Proficient in Catia V5
o Proficient in Smarteam
o Experience designing aircraft Interior components, furnishings and Interior Installations required (eg: galleys, lavatories, liners, personal service units, etc)
o Experience of routing plumbing on various monuments
o Electrical Harness Installation (EHI) experience also a plus.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field.
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule.
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-558
Job Location: Savannah, GA
Rate: $65-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Level 3

Description:
Indotronix seeking an experienced Mechanical Design Engineer for a position in Grand Prairie, TX, to support Production Engineering efforts associated with a legacy missile program.
The candidate for this position will work in a Production Program environment and support Material Review Board (MRB) type activities associated with specific missile / canister components for an international customer. The preferred candidate will be the Mechanical Engineering point of contact for the legacy program relating to Missile and Canister hardware, and will support hardware recertification and production contracts.

The candidate will be expected to screen and evaluate failures, defects, production issues, and/or questions from the international customer and leverage engineering teams as necessary to develop viable solutions, usually in time sensitive situations.

Other notable tasks include: Development of 3D drawing models and creation/release of 2D engineering drawings using 3D CAD Software, preferably PTC CREO-4.

Interface development and generation of Instructional Engineering Release (IER) documents. Technical support to program suppliers for procured components.

Collaborate / Coordinate with other Mechanical Engineering (Structures, Thermal and M&P) and technical disciplines (Electrical Engineering, Systems Engineering, Software Engineering, Product Support), Procurement (Materials and Subcontract Management), Quality Assurance, Manufacturing Engineering, Production Operations, and product line suppliers / vendors.

Provide engineering liaison effort to support the fabrication, assembly and integration tasks associated with the product line, including auditing manufacturing work instructions, production process reviews, and attending supplier audits.

Support product line validations (PLVs) at program suppliers and first article inspections. Review proposed mechanical related changes from the US production team and assess the impacts/applicability to the International program. Interface with customers, a multi-functional team (Engineering, Configuration Management, Global Supply Chain, Contracts, Program Management, Manufacturing, International Trade and Compliance) in a fast-paced dynamic environment to support production and meet program commitments.

Travel to support and provide technical assistance to existing / new suppliers, support hardware fabrication, assembly, integration, and testing activities in CAMDEN, Arkansas, and provide on-site support to the programs international customer.

Mandatory skills:

Must sit onsite at the facility.
Must be USC.
Ability to obtain clearance.
Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).

Desired:

Exposure to Geometric Dimensioning and Tolerancing (GD&T). Experience with detail, assembly, and installation type 2D drawings. Knowledge of manufacturing and manufacturing processes. Knowledge of mechanical drawing standards. The candidate should have experience with Material Review Board (MRB) type experience, where disposition of discrepancy reports will be required by engineering. Knowledge of Microsoft Office software (Excel, Word, and PowerPoint). Knowledge of Agile PLM (for 2D drawing release).
 
Job Number: JPC - 101777
Job Location: Grand Prairie, TX
Rate: $90 per hour on W2
Per Diem: Split
Overtime: Allowed
Duration: 10+ months
Start Date: ASAP
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Level 3

Description:
Indotronix seeks an experienced Mechanical Design Engineer for a position in Grand Prairie, TX, to support Production Engineering efforts associated with a legacy missile program.
The candidate for this position will work in a Production Program environment and support Material Review Board (MRB) type activities associated with specific missile / canister components for an international customer.
The preferred candidate will be the Mechanical Engineering point of contact for the legacy program relating to Missile and Canister hardware, and will support hardware recertification and production contracts.
The candidate will be expected to screen and evaluate failures, defects, production issues, and/or questions from the international customer and leverage engineering teams as necessary to develop viable solutions, usually in time sensitive situations.
Other notable tasks include:
Development of 3D drawing models and creation/release of 2D engineering drawings using 3D CAD Software, preferably PTC CREO-4.
Interface development and generation of Instructional Engineering Release (IER) documents. Technical support to program suppliers for procured components. Collaborate / Coordinate with other Mechanical Engineering (Structures, Thermal and M&P) and technical disciplines (Electrical Engineering, Systems Engineering, Software Engineering, Product Support), Procurement (Materials and Subcontract Management), Quality Assurance, Manufacturing Engineering, Production Operations, and product line suppliers / vendors.
Provide engineering liaison effort to support the fabrication, assembly and integration tasks associated with the product line, including auditing manufacturing work instructions, production process reviews, and attending supplier audits.
Support product line validations (PLVs) at program suppliers and first article inspections. Review proposed mechanical related changes from the US production team and assess the impacts/applicability to the International program.
Interface with customers, a multi-functional team (Engineering, Configuration Management, Global Supply Chain, Contracts, Program Management, Manufacturing, International Trade and Compliance) in a fast-paced dynamic environment to support production and meet program commitments.
Travel to support and provide technical assistance to existing / new suppliers, support hardware fabrication, assembly, integration, and testing activities in CAMDEN, Arkansas, and provide on-site support to the programs international customer.

Mandatory skills:
• Must sit onsite at the facility.
• Ability to obtain secret clearance.
• Must have the ability to travel (approximately 10-20%) as it may be required to support hardware fabrication / integration activities in Camden, Arkansas and travel internationally to support customer initiatives.
• Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience.
• 3D parametric modeling experience using (preferred 3D parametric modeling software, PTC CREO4).

Desired skills:
• Exposure to Geometric Dimensioning and Tolerancing (GD&T).
• Experience with detail, assembly, and installation type 2D drawings Knowledge of manufacturing and manufacturing processes.
• Knowledge of mechanical drawing standards.
• The candidate should have experience with Material Review Board (MRB) type experience, where disposition of discrepancy reports will be required by engineering.
• Knowledge of Microsoft Office software (Excel, Word, and PowerPoint).
• Knowledge of Agile PLM (for 2D drawing release).
 
Job Number: CJH-088
Job Location: Grand Prairie, TX
Rate: $90 per hour on W2
Per Diem: split
Overtime: allowed
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer 4

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Mechanical Systems Design Engineering experience with Smarteam / CATIA v5

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field.
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule.
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
.
 
Job Number: 24-560
Job Location: Savannah, GA
Rate: $58-$62/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Systems Engineer 4

Description:
Inconen is looking for a Mechanical Design Systems Engineer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Mechanical Systems Design Engineering experience with Smarteam / CATIA v5

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15575
Job Location: Savannah, GA
Rate: $58.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 09/13/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineers

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: $60-66/hr
Per Diem: Yes
Overtime: Possible
Duration: 1-year+
Start Date: ASAP
Input Date: 10/27/2021
Last Updated: 05/26/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Systems Designer

Description:
Inconen is looking for a Structures Systems Designer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Qualified candidates will have:
- Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Prior work experience with Gulfstream aircraft design

Responsibilities include:
- Maintain type design definition of the aircraft by producing the form, fit, and function documentation
- Engage various engineering, manufacturing and product support teams to complete designs
- Participate in design reviews
- Prepare engineering reports and presentations
- Mentoring to junior engineers when required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15576
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/10/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical engineer Level 4

Description:
Mechanical Engineer needed to Lead a multi-discipline team responsible for further development-of and make production ready a replacement coating system. The position will report directly to program management providing status and directing the team to balance technical needs and maintain schedule. The candidate will not only lead the team but also provide technical direction and review/approve changes related to M+P.

The assignment will be to lead the activities (and staff) to mature and productionize the replacement coating. The assignment includes but is not limited to:

• Lead multi-discipline team/report to JASSM management.
• Lead activities to productionize coating
• Work with Planning to maintain IMS on track
• Validate Coating
• Qualify Coating to Production Requirements
• Lead coating of hardware activities
• Lead Pole Model Activities (new process validation/qualification)
• Work with Production Operations and Low Observable (LO) engineers to define Robot sprayers requirements
• Assist with classified finish kit drawings

Mandatory skills:

Must be USC.
Must be able to sit onsite at facility.
Active secret required to start.
Minimum 10 years experience working as a Materials and Process Engineer.
A strong foundation in Materials and Processing (M+P) is required for this effort.
Bachelor's Degree from an accredited college in a Material Science and or Mechanical Engineering or related discipline.
Familiarity with aerospace materials, processes, and LO coatings -Prior experience with leading a team and overseeing large material validation, process development, and testing efforts.
Demonstrated strong problem solving and analytical skills.
Excellent English writing and verbal communication skills.
 
Job Number: CJH-JPC - 01725
Job Location: Orlando, FL
Rate: $95 per hour on W2
Per Diem: split
Overtime: allowed
Input Date: 07/15/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Paint Equipment Design Engineer

Description:
A Paint Equipment Design Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for driving development and continuous improvement of equipment, paint process and standards with the Paint Shop. To be considered for this role, you will have a Bachelor's degree in Industrial, Mechanical, or Electrical Engineering plus a minimum of 3 years of experience in a technical engineering role.

Paint Equipment Design Engineer Job duties:

* Perform root cause analysis on equipment bad actors and major unplanned downtime. Develop and implement solutions using problem solving analysis such 8D and several other tools.

* Work in a team of engineers and technicians as an in-house integration team that scopes and executes projects from concept through to start-up and commissioning.
* Become subject matter expert on all equipment - mechanical, electrical, instrumentation and controls - and train other engineers and technicians in the paint shop.
* Takes initiative to create, implement and improve PM documents and schedules, under the direction of the maintenance management.
* Perform major equipment repairs and rebuilds, (some weekends and holidays required).

Qualifications:

* Knowledge on paint processes and robot programming (Durr equipment is a plus).
* Skilled with the use of a variety of hand and portable tools, as well as general machining and welding.
* Able to read and interpret mechanical drawings and electrical schematics.
* Willing to perform shift work (nights) and overtime as required.

If you are interested in this Paint Equipment Design Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308796
Job Location: Fremont, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/27/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Coordinator

Description:
An Architectural Project Coordinator role located in Las Vegas, NV is currently available through Belcan. The Architectural Project Coordinator will be taught leadership skills and is a person who gets things done with minor supervision and direction by Senior Associates. A Project Coordinator-6 is a Professionally Degreed Graduate Architecture or Engineer, or an Associates Degreed professional with Seven (7) to Ten (10) years of professional experience

Architectural Project Coordinator Job Requirements:

* Assist in coordinating and leading the project team, with direction from the Project Manager, in developing construction contract documents for MID RANGE TO SMALL Building Projects. Engage with the PM and IPT to communicate task assignments, solicit status updates, and maintain program milestone achievement projections.
* Assist the Project Manager with project administration from schematic design phase through construction administration phase.
* A Project Coordinator-6 will be assigned specific responsibilities (as listed under the Project Coordinator-7) for specific projects. As a Project Coordinator-6 skill levels increase, project responsibilities will be increased proportionally, thus allowing Project Managers to effectively manage more projects.
* A Project Coordinator-6 may be called upon to assume full Project Coordinator-7 responsibilities. These assignments will be based on the individual Project Coordinator-6 skill level and the specific project's scope of work.
* Be aware of the project scope and of the Client's objectives, Satisfy Client's goals.
* Responsible for successful execution of the project and construction contract documents. The Project Coordinator is one of the Project Managers resources in organizing, coordinating, researching information, code analysis and troubleshooting the project.
* Receive incoming project information and distribute it to the project team and to outside consultants as directed by the Project Manager.
* Represents the firm in a professional manner and provides the quality control for the preparation of construction contract documents. Follows applicable guidelines for project standards as described in the CAD Manual and the Associates Policy & Procedure Manual.
* Assist with review of preliminary designs; reviews of schedules with labor projections. Provides guidance and training for other Project Coordinators and Technical Associates. Assists with maintaining specific project job files; attends project team meetings; anticipates and interprets problems and recommends solutions; reallocates work as necessary to meet scheduled deadlines; Assists in preparing memos and correspondence to Clients and coordinates correspondence with the Project Manager or Principal In-Charge.

EDUCATION AND EXPERIENCE REQUIRED:
* Professional Degree Graduate Architect/Engineer, or holds an Associate's Degree in Architecture/Engineering with a minimum of Seven (7) to Ten (10) years professional experience.
* Relevant work experience to include experience in all phases of architectural drafting, detailing scheduling, and coordination, plus a good knowledge of civil, structural, mechanical and electrical engineering, or any combination of education and experience that provides equivalent knowledge, skill and abilities.
* Strong computer aptitude to include thorough knowledge of computer-aided drafting and design systems.
* Ability to guide and supervise the work of others.
* Strong organizational skills.
* A thorough knowledge of ALL National Building codes.
* Strong understanding of building materials and construction methods and strong knowledge of procedures for production of construction documents.
* Ability to add, subtract, multiply and divide; perform calculation using fractions, decimals, and percentages; perform algebra, geometry and trigonometric calculations.
* Strong ability to make independent decisions within a general framework.
* Attend in-house seminars and continuing education outside of the office.
* Well-developed analytical and problem-solving skills.

If you are interested in this An Architectural Project Coordinator role located in Las Vegas, NV please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312116
Job Location: Las Vegas, NV
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/03/2021
Last Updated: 12/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project and Component Engineer (Systems Components)

Description:
Inconen is looking for a Project and Component Engineer (Systems Components) for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Active Secret Clearance or active within the last two years is required **
** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
** Candidates should have 3 years of related work experience **

Duties:
-Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

-25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
-25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
-20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-10%: Develops trade studies, design concepts, systems integration and component-level test plans.
-10%: Supplier integration with external vendors
-10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
-A Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: 15486
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/23/2021
Last Updated: 09/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Description:

Develops processes, systems, and equipment that ensure the quality, reliability, and system safety of company or procured products and services. Provides quality system design and analysis review to validate the integrity of quality decisions that affect products and services .Analyzes contractual, product definition, and specification requirements for the development or modification of methods, procedures, and metrics needed to ensure that quality standards and practices are attained. Analyzes and provides material review dispositions for nonconforming materials, parts, and equipment. Performs scientific evaluations and analyses and processes audits. Tests and approves products, processes, equipment, and measurement systems. Ensures that resulting processes provide for configuration management. Participates in design and product reviews to ensure that producibility, inspectability, reliability, safety, Quality System integrity, and business process management objectives are met. Performs such research as benchmarking to industry standards; analyzes and compiles performance reports and process control statistics in order to determine and improve process capability or product quality. Performs root cause analyses. Recommends and supports the implementation of corrective actions that are necessary to reduce or eliminate nonconformance to design specifications. Interfaces with company employees, suppliers, customers, and regulatory agencies to ensure compliance with contractual, company, and regulatory requirements. Develops and uses statistical methodologies to ensure that specified levels of safety, reliability, and process capability are achieved, maintained, or improved.
• Define process flow, performs PFMEA & Control plan
• Ability to put all PPAP documents together & submit to customer for approval
• Ability to perform Gage R&R, SPC, Cp / CPk
• Ability to implement a Quality Management System for a new program



Requirements:
Bachelor's of Science in Aerospace, Mechanical, Industrial Engineering or other related course of study from an ABET accredited University
Minimum 5+ years of experience required


Preferred Qualifications:
• Experience with RCCA (root cause/corrective action) / 8D Methodology
• Proficiency with Microsoft Office (mainly Word, Excel & PowerPoint)
• Proficiency with PFMEA, Control plan, & PPAP
• Ability to travel to customers & suppliers, as needed




The Structures Company LLC is an AA/EOE.
 
Job Number: 497
Job Location: Kinston, NC
Rate: $60-$65/Hr. ***DOE***
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/24/2021
Last Updated: 08/13/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer FAIRS- Aircraft Manufacturing - China.

Description:
Quality Engineer FAIRS - Aircraft Manufacturing - China.
 

Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Quality Engineering - FAIRS First Article Inspection.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.

 

Role and Duties:

  • Responsible for the review and technical preparation of aircraft project structure and system assembly related process documents (assembly outline, advanced assembly outline).
 
  • Responsible for formulating aircraft project structure, system assembly related first article inspection plan, and preparation of first article inspection quality plan, etc.
 
  • Responsible for the preparation of the inspection requirements and plans in the relevant delivery specification SPS for the components of the model project structures supplier, the preparation of the structural component inspection plan, analysis of the inspection results, and preparation of the measurement report.
 
  • Responsible for compiling the acceptance inspection form for the structural parts and finished parts of the model project, and formulating the acceptance inspection requirements.
 

Required Experience and Qualifications:

 

  • Bachelor degree or above, aircraft, mechanical, electrical, aircraft manufacturing majors, aviation colleges are preferred. 2-3 years and above, quality-related work experience, aerospace industry quality-related work experience.
 
  • Proficient in AS/EN9100 system, proficient in using quality management tools and methods.
 

Candidates should be prepared to live and work in China full time on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-370
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/28/2021
Input Date: 04/29/2021
Last Updated: 08/06/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector III

Description:
A Quality Assurance Inspector III in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible and capable of dimensionally inspecting high-tolerance spacecraft components using Faro-Laser system and a wide range of higher precision measuring or Non-Destructive Evaluation equipment. Experience and understanding of the theories of metrology is needed to be successful in this position. To be considered for this role, you will need a High School Diploma or equivalent and 5 years' experience in a Mechanical Inspection environment. This is a great opportunity with a growing company.
*Must be willing to work shifts on a rotational basis and weekends/on-call as needed*

Quality Assurance Inspector III Job duties:

* Inspect and file/record incoming part history records.
* Perform accurate mechanical, physical and visual inspection of raw materials, components,
and sub-assemblies per Inspection Plans, drawings and other specification requirements.
* Read and interpret specifications and part prints.
* Initiate nonconformance reports (NCs) as required
* Ensure calibration and maintenance of inspection equipment is up to date prior to conducting
inspection operations.
* Perform product identification and traceability activities, as required.
* Work with other company personnel to resolve inspection questions.
* Communicate with project engineers to ensure compliance with the final product
requirements.
* Document information on the computer in various databases and other internal programs
* Participates in in-process and final inspection as needed.
* Trains collateral duty Inspectors
* Perform other miscellaneous duties as assigned
* Follow all clean-up and housekeeping procedures. Comply with all quality, safety, and work
rules and regulations.
* As needed, assist Quality Engineers with conduct of First Article, in-process, and final
inspections
* Train contract / temporary employees in the inspection procedures.

Qualifications:

* 5 years' experience in a Manufacturing Quality Control environment.
* 5 years' experience in aviation or spacecraft preferred
* Previous mechanical inspection background with ability to use Faro-Laser System and basic hand measurement tools (calipers, micrometers, thread gauges etc.)
* As required by site, knowledge of and ability to use a wide range of higher precision
measuring or Non-Destructive Evaluation equipment.
* Minimum (5) years' experience in mechanical inspection and inspection techniques.
* Self-starter requiring minimal supervision.
* Effective teamwork, interpersonal, and communication skills.
* Good written and verbal communication skills.
* Experience with MS Excel and Word.
* Proficient with geometry and trigonometry (machine shop math).
* Knowledge and ability to interpret Geometric Dimensioning & Tolerance per ASME Y14.5M

Pay Rate: Up to $30/hr DOE

If you are interested in this Quality Assurance Inspector III in Louisville, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 312882
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/26/2021
Last Updated: 07/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector IV (Laser-FARO)

Description:
A Quality Inspector IV (Laser-FARO) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for performing inspection duties to ensure that incoming parts, in-process production and shipped product fulfill all company quality requirements. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 5 years of experience in mechanical inspection and inspection techniques.

Quality Inspector IV (Laser-FARO) Job duties:

* Receiving and Production Inspection.
* Inspect and file/record incoming part history records.
* Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per Inspection Plans, drawings and other specification requirements.
* Read and interpret specifications and part prints.
* Initiate nonconformance reports (NCs) as required.

Qualifications:

* 2-5 years' experience in a Manufacturing Quality Control environment.
* Previous mechanical inspection background with ability to use Faro-Laser System, CMM (preferably Zeiss), Romer, Laser Tracker and basic hand measurement tools (calipers, micrometers, thread gauges etc.).
* As required by site, knowledge of and ability to use a wide range of higher precision measuring or Non-Destructive Evaluation equipment.
* Knowledge and ability to interpret Geometric Dimensioning & Tolerance per ASME Y14.5M.

Pay Rate: Up to $34.00/hr DOE

If you are interested in this Inspector IV (Laser-FARO) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 313939
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/01/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector III (Laser-FARO)

Description:
A Quality Inspector III (Laser-FARO) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to ensure that incoming parts, in-process production, and shipped product fulfill all quality requirements. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 5 years of experience in mechanical inspection and inspection techniques.

Quality Inspector III (Laser-FARO) Job duties:

* Receiving and Production Inspection.
* Inspect and file/record incoming part history records.
* Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per Inspection Plans, drawings and other specification requirements.
* Read and interpret specifications and part prints.
* Initiate nonconformance reports (NCs) as required.

Qualifications:

* 2-5 years' experience in a Manufacturing Quality Control environment.
* Previous mechanical inspection background with ability to use Faro-Laser System, CMM (preferably Zeiss), Romer, Laser Tracker and basic hand measurement tools (calipers, micrometers, thread gauges etc.).
* As required by site, knowledge of and ability to use a wide range of higher precision measuring or Non-Destructive Evaluation equipment.
* Knowledge and ability to interpret Geometric Dimensioning & Tolerance per ASME Y14.5M.

Pay Rate: Up to $29.50/hr DOE

If you are interested in this Inspector III (Laser-FARO) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313938
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/01/2021
Last Updated: 09/03/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Manager

Description:
A Quality Manager job is currently available at Belcan in Bamberg, South Carolina. This is a full time, direct job with full benefits. Great matching candidates will have five years of quality engineering experience with ISO9001 requirements in a mechanical, micro machining facility, preferably in the automotive or fuel nozzle industry. You will be conducting the activities of a quality manager dealing with ISO9001 compliance, including internal auditing, and process assessments, along with handling quality issues and escapes, and managing the quality engineering and inspection processes.

Quality Manager job duties:
* ISO 9001 compliance
* Management of Quality Engineering function, dealing with new product development through production completion of product, and aftermarket issues. This includes drawing and process sheet reviews and revisions, FAI's, process improvements, inspections, and escapes
* Responsible for inline and final inspection activities

Qualifications:
* Should have at least 5 years experience in the quality engineering field
* 2 year engineering degree or equivalent
* Background with ISO9001 requirements, and automotive quality requirements
* Experience in a machining type environment, preferably micro machining
* Legal authorization to work in the US required

Desired but not required skills:
* 4 years engineering degree or equivalent experience
* ASQ Certified Quality Engineer (CQE) or ASQ Certified Quality Manager (CQM)

If you are interested in this Quality Manager job in Bamberg South Carolina please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 314346
Job Location: Bamberg, SC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/16/2021
Last Updated: 07/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: BeeLor
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
R&D Engineer

Description:
A R&D Engineer role located in Redmond, WA is currently available through Belcan. The R&D Engineer will be responsible for moderately complex research, development, testing and implementation of mechanical systems and systems design with human factors considerations for medical products/devices. Works with the cross-functional teams to develop specifications for product development and prototyping. Develops product design specifications and documents in accordance with company, ISO-13485, FDA and other requirements. Builds product prototypes. Test and verifies product design and prototypes and writes design verification/validation protocols. Writes verification and validation test reports.

R&D Engineer Job Requirements:

* Responsible for the initiation, design, development, execution, and implementation of medical
devices using engineering and scientific principles.
* Invents prototypes and reduces to practice concepts in a rapid prototyping environment and
submits idea disclosures.
* Designs components or functional systems and modifies existing designs to develop or improve
products and facilitate manufacturing operations.
* Gathers information, makes studies; prepares original rough sketches; performs necessary
calculations; coordinates design criteria with engineering, manufacturing, tooling, material, and
planning groups.
* Checks completed layout and details drawings and specifications prepared by others for design
assignments.
* Participate in analyzing, evaluating, and designing solutions to problems affecting product
manufacturability or reliability.
* Interact with Marketing/Sales, Quality and Manufacturing Engineering (where appropriate) to
resolve manufacturing issues associated with product design.
* Provide support in new product transition to Manufacturing.
* Interact with vendors, where appropriate, to provide processing improvements through outside
technology.
* Plans and executes laboratory research and draws conclusions from test results.
* After training, may work in tissue lab.
* May train and/or provide direction to technicians.
* Designs, procures, and fabricates tooling and fixtures.
* Prepares standard reports/documentation to communicate results to the technical community.

EDUCATION AND EXPERIENCE REQUIRED:

* BS in Mechanical Engineering.
* 3+ years' experience.
* Training and expertise in a discipline related to device development, i.e., polymer engineering
and processing, joining methods, metals, etc.
* At least one year of experience in medical device industry, including QSR/ISO experience
* Experience building and bench testing prototypes.
* Experience with CAD/SolidWorks.
* Experience using common shop tools such as drill press, milling machine, lathe.
* Excellent written, verbal and sketch/drawing communication skills.

If you are interested in this R&D Engineer role located in Redmond, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312893
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/26/2021
Last Updated: 08/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineering Manager

Description:
An RF Engineering Manager job in Round Rock, TX is currently available through Belcan with one of our Electronics repair clients in the semi-conductor industry. You will be responsible for all engineering activity at company. Products include Radio frequency and DC power delivery systems. To be considered for this role, you will need a BSEE or MSEE degree or another relevant engineering field and at least 8 years of relevant experience. This is a great opportunity with a growing company.

RF Engineering Manager Job duties:

* Responsible for all engineering activity at company
* Leads both tactical and strategic technical responses to customer needs.
* Lead a group of experienced engineers to support the repair of over 700 different products, evolving processes, and techniques with new technology.
* Experience in RF and DC equipment for the semi-conductor industry
* Lead the company into a full PLM system upgrade integrated with the existing ERP system.
* Work with outside suppliers such as PCB, PCBA assembly, and Machine Shops to realize designs.
* Mentor growth in both teams and on an individual level.

Qualifications:

* BSEE or MSEE degree or another relevant engineering field.
* Must have three years of experience managing engineering teams delivering successful products/projects-additionally, at least five years of as a practicing engineer with experience in RF or related fields. A total of eight years experience minimum.
* Have a proven ability to manage both Engineering Technicians and Engineering Professionals' teams to motivate, set priorities, and facilitate.
* Understand the difference between a product repair organization and a manufacturing/product production company and what contributes to the productivity of both.
* Demonstrated experience with CAE software such as Genesys, Sonet, Alibre, and Circuit Studio or equivalent tools.
* Applicant will need to have an applied understanding of electrical, mechanical, and software disciplines to lead this team.
* Knowledgeable in RF generators and matching networks in the 400KHz to 200 MHz spectrum with power levels of several Kilowatts (not cell phone technology).

If you are interested in this RF Engineering Manager job in Round Rock, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 312582
Job Location: Round Rock, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/14/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Inconen is looking for a Reliability Engineer for our client, a well-known Aerospace Company, in Camden, AR.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
-Our client is looking for a Reliability Engineer to help them oversee certain aspects of their operations.
-In this role, you will perform preventative and predictive maintenance on our tools and equipment.
-We consider these value-added tasks because they help keep our production costs down by preventing interruptions.
-You will also conduct a variety of failure mode and effects analysis (FMEA) and root cause analysis tasks, identifying potential risks to our operations and developing corrective actions.
-In this role, you will contribute to our continual improvement process and help strengthen the overall viability of our company.
-Applicants should have a bachelor’s or master’s degree in mechanical engineering.

Skills:
Required:
-Ensure the reliability of equipment and processes
-Perform preventative and predictive maintenance
-Conduct a variety of failure analyses, including root cause and fault tree analysis
-Identify risks to business operations and develop corrective actions
-Contribute to the continual improvement process

Desired:
-Bachelor’s degree in mechanical or electrical engineering; master’s degree preferred
-Professional experience in manufacturing/production and reliability
-Data analytics skills
-Mechanical and electrical aptitude
-Familiarity with Six Sigma methodology
-Analytical skills

Education:
-Bachelor’s or Master’s degree
-5+ years of related experience
 
Job Number: 15565
Job Location: Camden, AR
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 09/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Job Title: Reliability Engineer
Duties: Our company is looking for a Reliability Engineer to help us oversee certain aspects of our operations. In this role, you will perform preventative and predictive maintenance on our tools and equipment. We consider these value-added tasks because they help keep our production costs down by preventing interruptions. You will also conduct a variety of failure mode and effects analysis (FMEA) and root cause analysis tasks, identifying potential risks to our operations and developing corrective actions. In this role, you will contribute to our continual improvement process and help strengthen the overall viability of our company. Applicants should have a bachelor's or master's degree in mechanical engineering.
Skills: Required:
Ensure the reliability of equipment and processes,Perform preventative and predictive maintenance, Conduct a variety of failure analyses, including root cause, and fault tree analysis, Identify risks to business operations and develop corrective actions, Contribute to the continual improvement process.
Desired:
Bachelor's degree in mechanical or electrical engineering; master's degree preferred. Professional experience in manufacturing/production and reliability. Data analytics skills, Mechanical and electrical aptitude, Familiarity with Six Sigma methodology, Analytical skills

Education: Bachelor's or Master's degree
 
Job Number: 58737
Job Location: Camden, AR
Rate: $70.00
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: 08/02/2021
Input Date: 07/16/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Linda Flynn
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Seeking Manufacturing Engineers III for Savannah, GA

Description:
Contract- Manufacturing Engineer III in
Savannah, GA
Education and Experience Requirements
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Job Description
Principle Duties and Responsibilities:
Essential Functions:
1.Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2.Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3.Author DRDI/DMT rework instructions to support effective corrective actions.
4.Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
5.Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
6.Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
7.Investigate and assist in preparing justification for equipment and facility requests.
8.Perform productibility studies from engineering drawings.
9.Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
10.Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
11.Keep current on state-of-the-art manufacturing developments.
12.Incorporate Lean Manufacturing Methodology into existing and future processes.
13.Develop business case and present to management for process improvement approval.
14.Assume the duties of the ME Group Head in his/her absence.
15.Assign and review work of subordinate personnel.
16.Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
17.Lead/coordinate the implementation of projects between multiple orgs.
18.Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
19.Support all Safety, Sustainability and Ergonomic Initiatives. .

Additional Functions:
1.Ensure quality policies are being practiced; make recommendations to improve quality. .
Perform other duties as assigned.

Other Requirements:
1.Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. .
2.Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3.Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4.Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5.Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
6.Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
=====
Email your Resume and then call Peggy at 774-210-4108 to discuss.
 
Job Number: PL Mfg.Eng.GA
Job Location: Savannah, GA
Rate: $55-70/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2 weeks
Input Date: 12/07/2021
Last Updated: 10/31/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solderer

Description:
A Senior Solderer job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred Due to the nature of the work performed in this facility, US citizenship is required.

Senior Solderer Job duties:

* Perform fabrication or inspection functions in a research, production or pre-production environment by building or integrating hardware for prototypes, assemblies and large complex systems, soldering ribbons/strip line skills for RF performance
* Previous J-STD-001 space addendum or NASA 8739 certification is preferred

Qualifications:

* A High School diploma or equivalent plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred
* Ability to solder complex assemblies, small jumper wires.
* Ability to read a drawing, and wire list
* Ability to perform more advanced fabrication and marking
* Distinct communication and computer skills
* Solid knowledge of Statistics and SPC applications

If you are interested in this Senior Solderer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313660
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technician-Equipment Maintenance

Description:
A Senior Technician-Equipment Maintenance role located in Gresham, Oregon is currently available through Belcan. The Senior Technician-Equipment Maintenance role will support maintenance and repair of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.

Senior Technician-Equipment Maintenance Requirements:

* Repair and Maintain LAM, Tel and AMAT Etch systems.
* Repair and Maintain Novellus & Mattson Strip systems.
* Trouble-shoot electronic, electrical and mechanical problems.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Work with systems containing radiation, electrical, mechanical, liquid and gas hazards.
* Practice effective and productive written and verbal communication.
* Document work in maintenance logs effectively.
* Follow procedures and instructions.
* Able to contribute as a reliable and effective team member with minimal supervision.

EDUCATION AND EXPERIENCE REQUIRED:

* AA degree in a technical field,Or equivalent semiconductor industry experience, military training
or technical degree.
* 5-7 years of experience in Etch equipment maintenance.
* Solid organizational, documentation and writing skills.
* Creative problem-solving and decision-making skills.
* Self-directed, self-motivated.
* Proficient with MS Office products.

If you are interested in this Senior Technician-Equipment (Etching Machine) role located in Gresham, Oregon please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314351
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/20/2021
Last Updated: 09/09/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service Engineer

Description:
A Service Engineer job is available with a client in San Jose, CA. The individual will be responsible for working with the customer at their installation site to make certain that the equipment is installed and continues to operate properly.

Responsibilities:
* Installation of our high-tech automated systems, maintenance, service visits and repairs at our customer sites
* Technical consulting on our systems to ensure maximum operational capability and 110% customer satisfaction and promote our customer care contracts
* Co-operate closely with our automation chemists and business managers to provide technical Support
* Actively communicate customer needs and requirements to our service & support management and to the R&D department
* Support production department and perform final tests of tools and equipment
* Training of distributors and new or third-party service engineers
* Perform repairs of customer tools or modules in our repair center

Requirements:
* Solid education in electrical & mechanical engineering
* 3 Years of experience in repair and maintenance of instrumentation used in chemical laboratories (e.g. parallel synthesizers, liquid handlers, auto samplers, HPLC…)
* Enjoy direct contact with customers and frequent travel (national approx. 40-50%)
* Definite customer orientation and confidence to work independently
* General understanding of typical workflows in chemistry laboratories is a huge plus
* Solid communication skills in English, knowledge of any further language is a plus
* Solid user experience with Microsoft office products Excel and Word

THIS IS A DIRECT POSITION

If you are interested in this Service Engineer job in San Jose, CA, please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan Engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314160
Job Location: San Jose, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/10/2021
Last Updated: 02/21/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Siemens NX 12 Designers with Teamcenter

Description:
Mechanical modeling using NX 12 managed with Teamcenter.
Knowledge of Word, Excel, Windows and NX 12 as required.
Education and Experience
• 2 year Technical Degree in Drafting or Engineering and 10 years directly related experience or BS in Engineering and 7 years of related experience.
• Must be experienced with geometric dimensioning and tolerating per ASME Y14.5-2009. GDTP Professional Certification Preferred.
• Must be a U.S. Citizen and ability to obtain DoD security clearance.
Email your resume and call Peggy at 774-210-4108 to discuss.
 
Job Number: PL-NX 12
Job Location: Chandler, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 2-3 weeks
Input Date: 07/21/2021
Last Updated: 09/17/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Mechanical Engineer

Description:
A Sr. Mechanical Engineer in Austin, TX is currently available through Belcan. This is a Direct Hire role. In this role, you will be responsible for the design and manufacturing of electro-mechanical actuators for UAVs. Including requirements gathering, DFM, FEA, supplier sourcing, and assembly processes. Our client is expanding their product line and is looking for an individual who displays an entrepreneurial mindset and is well versed in machine design for the aerospace and defense industry. NO SPONSORSHIP PROVIDED-Must be a US Citizen

Senior Mechanical Engineer job duties:
* Detailed mechanical design of EM actuators including:
* Gearing and bearing design and analysis
* Structural analysis
* Analysis and specification of ancillary EM components (clutches, brakes, position sensors, etc.)
* Tolerance stack-up of precision assemblies
* Provide support proposal efforts in a fast-paced aerospace environment
* Creation and ownership of CAD models
* Generation of customer deliverable test procedures and reports (ATP, QTP, QTR, etc.) as well as other data items (structural analysis, reliability predictions) in support of development

Qualifications:
* Bachelor of Science degree in Mechanical Engineering from an accredited college or university is required; a Master of Science degree is preferred.
* At least ten years of engineering experience required including design experience with mechanical power transmission components.
* Prior experience operating in an AS9100 quality environment is preferred
* Expertise in CAD design tools (SolidWorks is the preferred package)
* Knowledge of Finite Element Analysis (FEA), common aerospace materials and process specification and application
* Working knowledge of geometric dimensioning and tolerancing (GD&T)
* Ability to perform structural analysis and weight optimization
* Must be a US Citizen-NO SPONSORSHIP AVAILABLE

If you are interested in this Sr. Mechanical Engineer job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 309693
Job Location: Austin, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/05/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Facility Maintenance Technician

Description:
Belcan has a job with a service client for a Senior PLC/Maintenance Technician located in Riverside, CA This person will function as one of the Sr.Lead Technician's at the customer site for a long term maintenance contract.
Key responsibilities;
* Preventive and predictive maintenance, scheduled maintenance, corrective maintenance, scheduled repairs, emergency repairs, and performs complex maintenance on tools, test equipment, etc.
* Log all service work performed, downtime during repair, and account for equipment service requests of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs.
* Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
* Guides on-site technical and operational support in the design, development, installation and maintenance of equipment and systems of a very complex nature. Guides very complex site surveys to develop base or installation design plans. Guides training customers to maintain and adjust very complex equipment. Develops and submits reports covering all job activity. Guides the maintenance of very complex tools, test equipment, calibration items, etc. May develop the planning and estimating of labor categories, rates, material dollar costs, transportation expenses and per diem rates to complete very complex proposals. Guides the review of very complex task plans, drawings, and installation schematics and provides continual guidance throughout task duration.
* Mentors junior techs. Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
* Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements and service training to customers.

Qualifications;
* Associate degree required, BS/BA in related discipline preferred. Specialized skill training/certification may be required.
* Skills including a balance of Electronics, Electrical and Mechanical skills with an emphasis on Controls.
* Strong electrical mechanical background and ability to troubleshoot problems. Need to be able to perform maintenance functions and make repairs in a professional and workman like manner. Need to learn system operations in quick fashion. Needs to be willing to follow procedures and read prints, schematics. Must have an excellent safety record. Must have AB PLC and RS Logix experience. Must have Rockwell software experience. Must be able to utilize CMMS.
* Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
* Five years maintenance experience with some conveyor equipment and material handling experience is preferred.
* Demonstrates and applies comprehensive knowledge of field of specialization to the successful completion of complex assignments. Demonstrates advanced knowledge of concepts, practices, and procedures of particular area of specialization. Demonstrates significant knowledge of organizations business practices and issues faced and contributes to problem resolution of those issues. Generally, 5 years of successful experience in area

THERE IS A FIRST SHIFT & 3RD SHIFT POSITION
Hours that we will work when we are 24/7
1st 5:30am - 2:00pm
3rd 9:30pm - 6:00am

THIS IS A CONTRACT TO HIRE POSITION. AVERAGE PAY IS $30.00/HR. SALARY BASED ON EDUCATION, JOB KNOWLEDGE, AND EXPERIENCE. ROTATIONAL WEEKENDS.

If you are interested in this Senior Maintenance Technician job in Riverside, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.


 
Job Number: 312596
Job Location: Riverside, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintenance Technician

Description:
Belcan has a job for a Senior Maintenance Technician located in Phoenix, AZ. The Maintenance Technician level is responsible for the day-to-day troubleshooting and preventative/predictive maintenance. Acts as a senior material handling technician on all equipment that is installed at a specific site location. Helps and mentors lower-level employees.

Key Responsibilities:

* Repair and maintenance of MHE including belt tracking, component adjustment/replacement, component lubrication, etc.
* Completes preventative maintenance routines, documentation, and procedures.
* Use electrical test equipment to troubleshoot electrical circuitry.
* Create and close work orders into asset management system with appropriate data to include labor hours, equipment maintenance, and parts used.
* Troubleshoot conveyance problems and understand resources needed to resolve them.
* Locate and track spare parts from inventory.
* Performs complex maintenance and equipment testing to ensure they meet specifications.
* Helps with training customers to operate equipment.
* Respond to service calls and correct equipment failures and faults.
* Identify problems as they occur and take appropriate steps to solve them.
* Develop and maintain positive working relationships across all levels of the organizations.


Qualifications:

* HS diploma or equivalent required. Associate degree or vocational technical training preferred. Specialized skill training/certification preferred.
* 5+ years of Electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics, and control panels.
* Mechanical experience with gearboxes, sprockets, chains, bearings, guide rollers, and other related equipment.
* Servo drives, PLC, PC controllers, dc power supplies, optical devices (i.e., encoders, photoeyes, etc.
* Knowledge of automated equipment; preferably automated material handling systems. Some experience with Allen-Bradley RSLogix5000 PLC controls platforms.
* Some experience with DeviceNet, PROFIBUS, Ethernet, or equivalent network communications is a plus.
* MS Office products


If you are interested in this Maintenance Technician position in Phoenix, AZ please apply via the 'apply now' link provided.


Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313847
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/02/2021
Last Updated: 07/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
A Sr. Mechanical Engineer job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You'll conceptualize and deliver complex mechanical structures and systems and your technical duties include the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelors Degree in Mechanical Engineering or other related discipline and typically 10 or more years of relevant experience. This is a great opportunity with a growing company.
MUST BE A US CITIZEN.

Sr. Mechanical Engineer Job duties:

* Understanding of applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
* Experience in Engineering Simulation such as Finite Element structural Analysis (FEA), Computational Fluid Dynamics (CFD), and Thermal Analysis
* Background in the Aerospace and Defense Industry
* Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing, and production processes

Qualifications:

* Bachelor's of Science degree in Mechanical Engineering or related discipline and typically 10 or more years of relevant experience
* Practical knowledge of engineering principles and practices
* Experience with Computer Aided Engineering tools
* Familiarity working in multi-disciplinary design and development teams

Pay Rate: Up to $70/hr DOE

If you are interested in this Sr. Mechanical Engineer job in Louisville, CO , please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 312986
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/28/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Quality Inspector

Description:
A Sr. Quality Inspector job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for inspecting parts and materials for compliance to specified requirements and perform real-time defect evaluation. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 2 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Quality Inspector Job duties:

* Inspect parts and materials for compliance to specified requirements and perform real-time defect evaluation.
* Preparation of QA documentation.
* Verification of corrective action implementation and rework.
* Interface with coworkers and internal customers.

Qualifications:

* Minimum of 2 years directly related experience.
* Distinct knowledge of material requirements, fabrication techniques, and manufacturability concepts.
* Superior knowledge of the strategic CAD and file management tools and design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning & Tolerancing).
* Solid understanding of simple mechanical stress; structural, thermal and tolerance analysis.

If you are interested in this Sr. Quality Inspector position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313726
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/24/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Engineer

Description:
A Sr. Systems Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for the evaluation of advanced concepts for emerging space markets and development of next generation architectures and technologies. To be considered for this role, you will have a Bachelors degree in Systems Engineering, or a related field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Systems Engineer Job duties:

* Demonstrated knowledge of engineering principles and practices.
* Experience working in multi-disciplinary design and development teams.
* Thorough understanding of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.

Qualifications:

* Advanced Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLAB.
* Knowledge of industry standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE).
* Background in the Aerospace and Defense Industry.
* Experience leading baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measures.

Pay Range: Up to $70/hr DOE

If you are interested in this Advanced Systems Administration Specialist position in Bloomington, MN please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314130
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/10/2021
Last Updated: 10/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer, Completions

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Unique Skills:
• Position involves work on aircraft interior design integration, mechanical systems and associated components.
• Candidate must have strong experience in aircraft structural analysis including composites, fatigue and damage tolerance.
• Must be skilled in NASTRAN, FEMAP for finite element modeling and analysis. Should have working knowledge of FAR Part 25 certification requirements.
• Experience should include structural analysis for a complete interior cabin design, cabinetry modification such as, galleys, closets, headliners, tables, etc. As well as LRU installations, structural repairs and skin penetrations.
• Must work with little supervision and be a willing team member that will perform work accurately combining sound experience with a common-sense approach.
• The qualified individual will adhere to aggressive schedules and budget requirements.

Duties and Responsibilities include:
• Assisting designers in selecting appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guidelines for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedules.
• Work without appreciable direction; work is reviewed from a long-range perspective for desired results
• Proficient in CATIA V5-SmarTeam/Enovia.
• Office Products such as Power Point, Project, Word and Excel
• AutoCAD Knowledge is a must
• Generating structural analysis for various types of installations and modifications using
• NASTRAN, FEMAP, ELFINI, and ANSYS for finite element modeling and analysis.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-534
Job Location: Dallas, TX
Rate: $68-75/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 05/19/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers Needed - 3 Openings

Description:
General Summary:

Experienced Stress Engineers with composite and metallic primary structures experience.



Duties and Responsibilities:

Serves as subject matter expert stress engineer responsible for metallic primary structure.
Provides leadership and guidance to stress engineers working on certification, analysis and testing.
Works with FAA DER’s and structural testing.
Provides recommendations and status updates to management.
Qualifications

Education, Work Experience, Certification and/or Licensure:

Bachelor’s degree in Aerospace, Mechanical Engineering or related field required. MS preferred.
Minimum of 10 years of engineering experience.


Knowledge, Skills and Abilities:

Experience writing certification stress reports.
Competent classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA.
Ability to explain and present analysis and assumptions in a rational manner.
Knowledge with 3D solid modeling (CATIA v5, Unigraphics).
Exposure to FINITE Element Analysis (NASTRAN, ABAQUS).
Exposure to programming languages (Python, VB Matlab).

The Structures Company LLC is an AA/EOE.
 
Job Number: 481
Job Location: Greensboro, NC
Rate: $65/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 1-year+
Start Date: 4-5 Weeks
Input Date: 07/19/2021
Last Updated: 08/17/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Manufacturing Engineers

Description:
Manufacturing Engineer Positions – Mesa, AZ – St. Louis, MO – New Orleans, LA – Ridley Park, PA – North Charleston, SC. Must have 5+ yrs exp in assembly and installation, fabrication and electrical. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.

Take your Career
to the Next Level
with the Help of Our Staffing Specialists!


 Nationwide Opportunities
 Competitive Compensation
 Great Benefits
 Referral Bonus

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Call for current openings
Multiple national openings for many engineering disciplines!

Andrew Kumar
Recruiter
(843) 955-9221
andrew.kumar@iconma.com
 
Job Location: AZ/MO/LA/PA/SC
Input Date: 01/02/2024
Firm Name: ICONMA LLC
Attention: Andrew Kumar
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 312/502-4795
800 Phone: 843/955-9221
Email: andrew.kumar@iconma.com
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
A Structural Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for supporting the design and construction of a variety of new projects and renovations to existing industrial, manufacturing, and office facilities. To be considered for this role, you will have a Bachelor's degree in Civil/Structural Engineering plus a minimum of 7 years of experience in structural design of commercial, industrial, or oil & gas industries.

Structural Engineer Job duties:

* Coordinate structural design on multidiscipline project teams including Mechanical, Electrical, Piping/Plumbing (MEP) professionals.
* Conduct structural analysis and design of concrete and steel structures, along with the creation of justifying structural calculations.
* Make technical assumptions, think independently to complete assigned work, and draw conclusions based on engineering judgement.
* Present 30% 60% 90% design reviews to stakeholders and multi-discipline teams.
* Manage structural projects from estimating through construction.

Qualifications:

* Registered and in good standing as a Professional Engineer (PE) with active NCEES record and ability to acquire PE license in CA.
* Familiarity with Revit Structural and experienced with Navisworks.
* Detail-oriented and technical, yet experienced enough to see the big picture.
* Willingness to work overtime to meet deadlines.

If you are interested in this Structural Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308784
Job Location: Fremont, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/23/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
A Structural Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for supporting the design and construction of a variety of new projects and renovations to existing industrial, manufacturing, and office facilities. To be considered for this role, you will have a Bachelor's degree in Civil/Structural Engineering plus a minimum of 7 years of experience in structural design of commercial, industrial, or oil & gas industries.

Structural Engineer Job duties:

* Coordinate structural design on multidiscipline project teams including Mechanical, Electrical, Piping/Plumbing (MEP) professionals.
* Conduct structural analysis and design of concrete and steel structures, along with the creation of justifying structural calculations.
* Make technical assumptions, think independently to complete assigned work, and draw conclusions based on engineering judgement.
* Present 30% 60% 90% design reviews to stakeholders and multi-discipline teams.
* Manage structural projects from estimating through construction.

Qualifications:

* Registered and in good standing as a Professional Engineer (PE) with active NCEES record and ability to acquire PE license in CA.
* Familiarity with Revit Structural and experienced with Navisworks.
* Detail-oriented and technical, yet experienced enough to see the big picture.
* Willingness to work overtime to meet deadlines.

If you are interested in this Structural Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308784
Job Location: Fremont, CA
Rate: --
Overtime: Possible
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 02/07/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures In Service Engineer Specialist

Description:
General Summary:
In service engineer will be responsible for aircraft in service engineering solutions. This will encompass repairs, modifications and alterations, system improvements for performance and reliability. This position will support the primary and secondary aluminum and composites aircraft structures.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Collaborates with the Integrated Product Team to resolve cross functional issues.
3. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
4. Manages task execution to ensure on-time and on-target completion.
5. Searches for problem root cause and develop corrective action plans and solutions.
6. Ability to deliver under pressure of AOG conditions; troubleshooting assistance, action plans and technical solutions
7. Provide technical expertise and solutions for in-service issues related to overall product safety, reliability and maintainability
8. Conduct and coordinate redesign investigations, root cause analyses and corrective actions of fleet issues, which may lead to procedural and/or product changes
9. Manage technical requests to meet committed turnaround times / customer requirements
10. Prepare reports and communication packages to support customer meetings, conferences, working groups and other initiatives
11. Build on cooperative working relationships with internal departments, external partners, suppliers and vendors
12. Calculates internal stress loads, preparation of shear and moment diagrams.
13. Provides presentations on various structures of the aircraft.




Qualifications

Education, Work Experience, Certification and/or Licensure:
1. Bachelor's degree in engineering with 5 years of directly related experience
a. or 8 years of work experience in lieu of formal education.


Knowledge, Skills and Abilities:
1. Customer focus and strong communications skills are essential
2. Ability to multitask.
3. Ability work independently as well as in a mutli-functional team environment.
4. Proficient in Microsoft Office Products.
5. Proficient in use of CATIA Version 5.
6. Use of Team Center.
7. Advanced knowledge of drafting rules.
8. Visual Basic, Matlab, Simulink, FiberSim, Determinent Assembly techniques, composite curing, and Geometric Dimensioning and Tolerance experience preferred.
9. Knowledge of principles of structural design mechanics including predicting strength and other possible structural instabilities.
10. Strong mechanical design skills for all structural components of aircraft.




Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.




The Structures Company LLC is an AA/EOE.
 
Job Number: 497
Job Location: Greensboro, NC
Rate: $56-$115K *DOE*
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-6 Weeks
Input Date: 03/03/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Special Missions (Weekend Day Shift)

Description:
Inconen is looking for a Structures MRB Engineer - Special Missions (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
- Bachelor’s degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Gulfstream GV/G550 experience a plus.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Supporting structural a/c modifications a plus.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Corridor, Word, Excel)
- Weekend Shift position. Typically, 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2.The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15162
Job Location: Savannah, GA
Rate: $66.67 - $71.43/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV (Secret Clearance)

Description:
Inconen is looking for a Systems Engineer IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Hardware Systems role, NOT Software or Electrical systems **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace)
-Advanced degree desirable. Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.
 
Job Number: 15530
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/12/2021
Last Updated: 08/12/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician

Description:
This position will initially be for cable and harness assembly which could transition into more complex assemblies.
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.
Works from schematics, engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Exclude technicians working in production or quality assurance.
Cable Harness and Reading Engineering Schematics experience is Required.
BS Degree is NOT Required for this position
 
Job Number: CJH-R-6032
Job Location: Syracuse, NY
Rate: $22
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 07/16/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician Level-3

Description:
Electronics Technician qualified and trained to support electrical/mechanical fabrication and limited testing associated with aerospace related or comparably critical systems.
Tasks include cable / harness fabrication, surface mount and thru-hole soldering, test box layout (including drilling / punching boxes to accept connectors, test points, etc.).

Mandatory:
Security Clearance required
Must be a detailed worker, capable of following written and oral instructions from engineering drawings and other inputs. -
Candidate must be able to pass LM provided solder and harness fabrication training. -
Candidate must have prior surface mount soldering experience -
Experience with cable/harness fabrication, manual soldering (SMT and Thru-Hole), test box layout (including drilling/punching boxes to accept connectors, test points, etc.).
Knowledge and use of basic test equipment such as multimeters as well as basic AC/DC circuitry is required.
Able to support travel for off-site testing activities Program Specific (within U.S.).
Experience with CCAs, subassemblies, assemblies, test boxes and off-site testing in a high paced interactive environment.

Desired:
Related military experience and previous LMC experience is a plus.
IPC-620, IPC-610 and J-STD-001 certification highly desirable.
Prefer that candidate has 5 years of previous aerospace experience.
 
Job Number: CJH-M-3155
Job Location: Orlando, FL
Rate: $35
Per Diem: Yes
Overtime: Yes
Duration: 12
Start Date: 7/12/2021
Input Date: 07/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
A Test Engineer job in Austin, TX is currently available through Belcan. This is a Direct Hire role. The ideal candidate will thrive in a fast-paced role, have a Bachelor's degree in Engineering or a related field and at least three years of experience in the assembly and testing of complex electro-mechanical systems in the aerospace, defense, or engineering. NO SPONSORSHIP PROVIDED-Must be a US Citizen

Test Engineer job duties:
* Execute testing and validation/qualification of products per the defined procedures
* Support the planning and implementation of an AS9100 quality management system
* Collaborate with applicable engineers to define acceptance criteria and limits
* Create and maintain appropriate documentation including, but not limited to: traceability materials/certifications, workflows, and quality records
* Improve and streamline existing assembly processes
* Lead and/or participate in troubleshooting and root-cause analysis of quality events; support process owners in the planning and implementation of corrective measures
* Lead and/or support negotiations with customers concerning quality demand fulfillment(s) and/or resolution of quality deficiencies including preparing external customer documentation.

Qualifications:
* Bachelor's degree in Engineering or a related field from an accredited college or university
* Minimum three years of experience in test engineering, operations, or manufacturing
* Minimum 1-2 years of experience in the assembly and testing of complex electro-mechanical assemblies in a production or prototype environment in the aerospace, defense, or engineering fields
* Prior experience working in an aerospace quality control (AS9100) and manufacturing environment, preferred
* Prior experience with project management, documentation practices, and turbine engines preferred
* Proficient level of working mechanical and electrical knowledge
* Occasional travel required
* Must be a US Citizen-NO SPONSORSHIP AVAILABLE

If you are interested in this Test Engineer job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 312583
Job Location: Austin, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/14/2021
Last Updated: 08/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Vehicle Dynamics Engineer

Description:
Responsibilities include creating and improving systems application of tools & methods. Research, analyze and implement on-track performance gains in racing car configurations, using predictive simulation technologies. Develop simulation tools & methodologies.

Requirements include: Degree in Mechanical Engineering or Mathematics or equivalent years of experience in automotive or racing industry. 5 years of configuration, operation, and validation of vehicle dynamics software (steady-state lap simulation, dynamic parametric models, multi-body simulations, etc.). Experience with vehicle test rigs: 7-post testing, kinematics & compliance rig, etc. Processing and analysis of time-series data in time, frequency, and spatial domains (visualization, signal processing). Practical Experience with racing car set-up problems and methodologies. Must have professional race team experience.
 
Job Number: 81650
Job Location: Brownsburg, IN
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 06/11/2021
Last Updated: 07/20/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Mark Johnston
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

Back to Advanced Job Search