Job Search Results

99 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:17PM Pacific Time by ContractJobHunter. )

Listings 1 - 99

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
44425-1 - Wire Design & Installation Engineer

Description:
Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Software Experience:

• WIRS
• CaddStation
• AdobePro
• CatiaV5
• Bogart
• ProgeCAD


The Structures Company LLC is an AA/EOE.
 
Job Number: 464
Job Location: Oklahoma City, OK
Rate: $55/Hr. *DOE*
Per Diem: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 05/26/2021
Last Updated: 05/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
61035 - Reliability & Maintainability Engineer

Description:
Reliability & Maintainability Engineer

Location: Fort Worth, TX (76118)

Job ID: #61035

12 month contract 

Position Responsibilities:
• Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
• Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Assess manufacturing parametrics and maintenance removal times.
• Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
• Perform budget estimating and management tasks.
Qualifications

Education Requirements:
• Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.
Position Requirements:
• Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
• Proficiency in Microsoft Office
• Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
• Candidates must be eligible to obtain Secret Security Clearance
Preferred Skills:
• Prior military experience maintaining rotory or tiltrotor aircraft.
• Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
• Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
• Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
• Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
• Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
• Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
• Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
• Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
• Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61035
Job Location: Fort Worth, TX
Duration: 12 month
Input Date: 04/30/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Publications –Technical Writer, Arlington, TX

Description:
Aerospace Technical Publications –Technical Writer, Arlington, TX

JR-020866



• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

JOB SUMMARY:

Administer and coordinate the development of Aerospace technical publications, related data and technical services support. The project is about the creation and revision of the maintenance documentation in S1000D & iSpec2200 standard. The manuals include but not limited to:
• Line Maintenance Manuals
• Fault Isolation Manuals
• Illustrated Parts Catalogues
• Illustrated Tools and Equipment Catalogues
• Engine Manual (EM)
• Engine Illustrated Parts Catalogues (EIPC)
• Component Maintenance Manuals (CMM)
• Component Maintenance Publications (CMP)
• Inspection and Repair Manual (IRM)
• Service Bulletins (SB)
• Service Information Letters (SIL)
• Spare Parts Bulletin (SPB)
The inputs will be Engineering Drawings, Bill of materials (BOMs), Production operation sheets, Technical mark-ups from Engineering, Factory Modification Sheets (FMS), Change Requests, SIL, SBs, TRs, repair procedure and customer specific documents.
The softwares used are R4i S1000D Suite, Adobe Acrobat Professional, Arbortext, Isodraw, NX, Visualizations Mockup and JT2GO.

ESSENTIAL JOB DUTIES:
• Administer and coordinate Technical Publications and Document Control groups consistent with the goals and objectives of the Engineering Department.
• Research and review engineering design drawings, engineering orders, and related technical data defining aeroengine modifications and determine their effect on aeroengine technical manuals and publications such as CMM, IPC etc.
• Write/Author technical content in Simplified Technical English based on the engineering inputs.
• Provide written data in S1000D standards using Client specific CSDB and publishing packages for the above technical manuals and.
• Develop, maintain and manage all document control services performed for the client.
• Provide input and suggestions for the continuous improvement of the various Department procedures, controls, flows and systems, and become familiar with Cyient internal policies and procedures.
• Maintain involvement in day-to-day Cyient operations to ensure that the highest level of technical support is maintained at all times.

Qualifications:

MINIMUM:
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. 'US Person' includes US Citizen, lawful permanent resident, refugee, or asylee.
• Five (5) years minimum technical publications experience involving aircraft/aeroengine related assignments as a Technical Author, Technical Illustrator or Editor.
• Must possess comprehensive knowledge of technical publications development practices, business environment, the S1000D standards and aircraft technical manuals such as MM, IPC, etc.
• Must have comprehensive knowledge of personal computer systems with Microsoft Office, xml/sgml editors and S1000D platforms. Must have excellent oral, written and organizational skills that are easily applied to administration and supervision.
• Must be able to read, write and understand English.
• Must have the ability to supervise, organize and motivate technical and clerical employees.

Preferred:
• Strong hands-on experience in developing illustrations for Aircraft CMM, AMM, SRM and Service bulletins
• Exposure to Aero Engines, Aero systems & Avionics systems is preferred Familiar and on-hands experience in various Technical publications tools – IsoDraw,
• Familiar with CAD Tools (NX, Catia, etc) and importing product data to generate illustrations
• Sound knowledge of Techpub standards like S1000D, ATA 100, iSpec 2200, ASD-STE 100 and Simplified Technical English.
• Ability to work in environment using Common Source Data Base (CSDB) and tools like R4i CSDB.
• Ability to create intelligent graphics and companion files as per S1000D standards.
• Awareness of various OEM business rules of Airbus and Boeing etc. while working on S1000D projects
• Responsible for the on time delivery and quality of the projects
• Good oral and writing skills, Ability to read and interpret engineering drawings

Skills & Experience
Technical author, Technical Illustrator, Technical Publications
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
• Apply


https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Arlington-Texas/Technical-Publications--Technical-Writer_JR-020866
 
Job Number: JR-020866
Job Location: Arlington, TX
Input Date: 04/21/2021
Firm Name: CYIENT
Attention: Elizabeth
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager - Level 2 / Level 3

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

Duties:
Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
30% - Perform validation of manufacturing bills-of-material and their attribute data.
15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
10% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required
-Proficiency with Microsoft Office products (e.g. Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 15169
Job Location: Huntsville, AL
Rate: $45.00 - $53.85/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/22/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager Level 2 / Level 3 (Contract)

Description:
Configuration Manager Level 2 / Level 3 (Contract) - Huntsville, AL

Pay Rate: 53hr

Overview:
• ** Candidates must be U.S. Citizens without Dual Citizenship **
• ** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **
• Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.
o 30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
o 30% - Perform validation of manufacturing bills-of-material and their attribute data.
o 15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
o 15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
o 10% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
• Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
• Experience and knowledge of PTC Windchill desired.
• Knowledge of design, development and manufacture of mechanical and electrical systems desired.
• Oracle ERP is highly preferred but not required Proficiency with Microsoft Office products (e.g. Word, Excel, and PowerPoint) required.
• Additional Skills: CAD / Electrical Systems / Operations / Change Management

Education:
• Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Location: Huntsville, AL
Rate: 53.00
Per Diem: split
Duration: 6 mos +
Start Date: asap
Input Date: 04/22/2021
Firm Name: NESC STAFFING
Attention: Jacob Arenstein
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer

Description:
Under limited general direction and following established procedures in accordance with contractual requirements and the client's policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

* 10 years as a drawing and model checker for Aerospace mechanical hardware**

** Strong proficiency using GD&T per ASME Y14.5 **

** 5-10 years Creo and Windchill PLM System **

10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 82812
Job Location: Canoga Park, CA
Rate: $60.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Kristan Anderson
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition Designer

Description:
Creo Product Definition Designer position for Aerojet in Huntsville AL:

Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition tolerance stacks and calculations, includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:


10 years of experience with CAD systems (Creo 5.0 or higher preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
Knowledge of Mechanical Aerospace hardware required.
Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
ASME Certification in GD&T is a plus.
Ability to read and interpret product definition and related specifications.

Education: Requires a Bachelor's degree in an appropriate discipline and at least 10 years of related experience or an equivalent combination of education
 
Job Number: 82743
Job Location: Huntsville, AL
Rate: $60.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Kristan Anderson
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition Designer - Level 3

Description:
Inconen is looking for a Creo Product Definition Designer – Level 3 for our client, a well known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **

Duties:
Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition tolerance stacks and calculations, includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
-Knowledge of Mechanical Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 10 years of related experience or an equivalent combination of education.
 
Job Number: 15052
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/18/2021
Last Updated: 06/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter

Description:
The incumbent requires conceptual direction with minimal technical inputs from a Senior Design/Project Engineer on design tasks. Incompletely defined requirements must be developed into specific designs generating a full design package consisting of layouts, schematics, detail drawings, assembly drawings, parts lists, etc. suitable for prototype and subsequently production release. The incumbent often directs other drafting personnel in the completion of assignments. Working independently or with an Engineer, the incumbent also generates dimensional and functional specifications for vendor supplied components.

The position presents design results for review and substantiates soundness of design through discussion of assumptions, constraints and analyses used. The position interacts with Development, Product and Manufacturing Methods Engineers as well as outside vendors during the course of product design
The position requires a level of technical know how that is commensurate with extensive experience in the design of high performance, high density packages.
Siemens Teamcenter/NX Computer Aided Design (CAD), 2D installation drawings, assembly drawings, machining drawings
BS/BA Degree
 
Job Number: 82876
Job Location: East Aurora, NY
Rate: $40+/hr
Per Diem: NO
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Kristan Anderson
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Requirements includes:
BS degree in Mechanical Engineering, or equivalent BS degree is preferred,
3 years of experience in 2D and 3D CAD modeling in automotive industry, preferably in design of chassis or powertrain components.
Practical engineering experience with race car chassis or powertrain design, fabrication, and related mechanical systems.
Simulation skills including FEA and kinematic geometry modeling.
Ability to read and understand engineering drawings and standard codes.
Knowledge of GD&T practices
Knowledge of mechanical and cost calculation process.
Strong data analysis and problem-solving skills with ability to identify true root causes.
Ability to create innovative design concepts based on sound engineering principles.
Ability to accurately apply engineering theories to design layouts and drawings.
Background in designing parts for an electrification project is a plus.
 
Job Number: 82833
Job Location: Santa Clarita, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 05/11/2021
Last Updated: 05/24/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Roby Lane
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Design Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret clearance preferred but not required **
** This will start out as a remote role **
** Candidates must have GD&T (Geometric Dimensioning & Tolerancing) and Creo CAD software experience. Windchill experience preferred **
** 6 years minimum of related experience as a Mechanical Design Engineer, with 6 years minimum of related experience using ProE/Creo CAD systems. Experience with rocket propulsion design preferred **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of liquid bi-propellant rocket propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Strong ability to design mechanical parts and assemblies.
-Good understanding of machining methods and mechanical joining techniques (welding, brazing, bolted joints)
-Responsible for designing and developing of propulsion products.
-Applies research to the planning, design, and development of rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Responsible for design modeling and coordination with other disciplines including analysis, manufacturing engineering, quality engineering, materials & process engineering, project engineering, etc.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies for design optimization.

Skills:
-Candidates must have experience with Creo & GD&T.
-Certifications are a plus.
-Windchill experience preferred.
-Mechanical Design and development Engineer’s research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Keywords:
-DESIGN ENGINEER
-CREO
-GEOMETRIC DIMENSIONING
-GEOMETRIC TOLERANCING
-WINDCHILL
-CAD
-CAD SOFTWARE
-ASSEMBLY
-ENGINEER
-ENGINES
-FABRICATION
-MANUFACTURING ENGINEERING
-MECHANICAL DESIGN
-OPTIMIZATION
-PROCESS ENGINEERING
-PROE
-ANALOG SILICON
-AUTO CAD
-CONCEPTUAL DESIGN
-DESIGN MODELING
-INDUSTRIAL/MANUFACTURING
-INTEGRATION
-INTEGRATOR
-SYSTEMS DESIGN
-TOLERANCE ANALYSIS

Education:
-BS degree in an Engineering field or equivalent field.
-MS degree is desired.
 
Job Number: 15174
Job Location: Canoga Park, CA
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 04/20/2021
Last Updated: 05/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Inconen is looking for a Design Engineer – Level 3 for our client, a well-known Aerospace Company, in Redmond, WA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have GD&T (Geometric Dimensioning & Tolerancing) and Creo CAD software experience. Windchill experience preferred **
** 6 years minimum of related experience as a Mechanical Design Engineer, with 6 years minimum of related experience using ProE/Creo CAD systems. Experience with rocket propulsion design preferred **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of liquid bi-propellant rocket propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Responsible for designing and developing of in-space propulsion products
-Applies research to the planning, design, and development of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Responsible for design modeling and coordination with other disciplines including analysis, manufacturing engineering, quality engineering, materials & process engineering, project engineering, etc.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies for design optimization.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent.
-MS degree is desired.
-6+ years of related experience required.
 
Job Number: 15055
Job Location: Redmond, WA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 4 Mos
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Inconen is looking for a Design Engineer - Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret Clearance not required but preferred **
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate’s resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using ProE/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent field.
-MS degree is desired.
 
Job Number: 15175
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 04/20/2021
Last Updated: 05/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Inconen is looking for a Design Engineer – Level 4 for our client, a well-known Aerospace Company, in Redmond, WA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have GD&T (Geometric Dimensioning & Tolerancing) and Creo CAD software experience. Windchill experience preferred **
** 10 years minimum of related experience as a Mechanical Design Engineer, with 10 years minimum of related experience using ProE/Creo CAD systems. Experience with rocket propulsion design preferred **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of liquid bi-propellant rocket propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Responsible for designing and developing of in-space propulsion products
-Applies research to the planning, design, and development of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Responsible for design modeling and coordination with other disciplines including analysis, manufacturing engineering, quality engineering, materials & process engineering, project engineering, etc.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies for design optimization.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent.
-MS degree is desired.
-10+ years of related experience required.
 
Job Number: 15056
Job Location: Redmond, WA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 4 Mos
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Inconen is looking for a Design Engineer – Level 4 in for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** An Active Secret Clearance is highly preferred, but not required **
** Candidates should have really strong GD&T (Geometric Dimensioning and Tolerancing) experience. Please provide summaries of candidates GD&T experience on their resumes **
** Candidates must have significant experience with Creo. Windchill experience strongly preferred.**
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **
** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Duties: Design Engineer
- Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
-Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
-Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
-Applies theories of heat and energy transfer to create practical solutions to technical problems
-Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
-Winchill experience strongly preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 12620
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 Mos
Start Date: ASAP
Input Date: 05/04/2021
Last Updated: 05/09/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer- Level 3/4

Description:
** Secret Clearance not required but preferred **

** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate's resume **

** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Skills:
-Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 82880
Job Location: Canoga Park, CA
Per Diem: Possible
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 05/11/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Roby Lane
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 3

Description:
Inconen is looking for an Engine System Design Engineer – Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** An Active Secret Clearance is highly preferred, but not required **

Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-6+ years of related experience.
 
Job Number: 15049
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/13/2021
Last Updated: 05/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 3

Description:
Must Haves:

CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.

Extensive knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education: Bachelor of Science in Mechanical Engineering or related engineering degree

CREO
SYSTEM ENGINEERING
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
 
Job Number: 82838
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Roby
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 4

Description:
Inconen is looking for an Engine System Design Engineer – Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** An Active Secret Clearance is highly preferred, but not required **

Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-10+ years of related experience.
 
Job Number: 15039
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/10/2021
Last Updated: 05/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You will also be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components
meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience. This is a great opportunity with a growing company.

Engineering Technician III Job duties:

* Ability to read and understand mechanical and electrical drawings, diagrams, schematics
and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand
tools, and power tools
* Comfortable working in confined spaces
* Experience in fabrication work to include metal, aluminum, composite, & plastics
* Has working knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Competency in the use of basic measuring tools (calipers, micrometers, height gages)
* Computer literacy in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions

Qualifications:
* Associate's Degree in a related field of study and at least 4 years of relevant experience.
* Previous experience and/or certifications within the aerospace and defense industry
* Previous experience in a manufacturing environment
* Experience with AutoCAD or other 3-D CAD software
* The ability to obtain and maintain a Security Clearance may be required

If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 310524
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/16/2021
Last Updated: 06/09/2021
Firm Name: BELCAN TECHSERVICES
Attention: IsabellaLardieri
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware/Software Engineer

Description:
A Hardware/Software Engineer job in Phoenix, AZ is currently available through Belcan. The Hardware Software Engineer will work with a small, high-performance team to develop new products and technology with a strong focus on design requirements, performance, improvement, reliability, manufacturing, and project completion. To be considered for this position you will need proven ability to work independently, proven teamwork skills with strong communication, and thrive in a high-paced product development environment.

Job Duties:
* Proven experience developing and implementing software for embedded devices and systems.
* Software and firmware for microcontrollers, wireless communications devices, battery management, machine controls, etc.
* Proficiency with software configuration and management tools, defect tracking tools and peer review.
* Knowledge of best practices for full software development life cycle, including coding standards, code reviews, source control management, build processes, testing and operation.
* OS coding including real time operating systems (RTOS).
* Proven ability to work with complex algorithms and data structures, write code from the ground up, and test and improve existing code.
* Communication protocols including UDP, TCP/IP, Modbus, SFTP, IMAP, Ethernet, IoT protocols and standards.
* C++, C, Java, Python, assembly language.
* Experience integrating RF devices with a microprocessor or microcontroller.
* Circuit simulation, pcb layout and optimization, reliability evaluation and low noise circuit design utilizing both analog and digital circuitry hardware CAD such as ORCAD EDA capture.
* Experience designing analog and digital circuits for feedback-control based power regulation and motor control.
* Experience performing ESD, EMI, steady state and transient electrical tests.
* Knowledge of IOT, SOC and related communication protocols, Wifi, MQTT, Bluetooth etc.




Qualifications:
* BS Electrical Engineering, Computer Engineering or equivalent.
* 3-5 in development of electronic products.
* Software and firmware for microcontrollers, wireless communications devices, battery management, machine controls, etc.
* Proficiency with software configuration and management tools, defect tracking tools and peer review.
* Knowledge of best practices for full software development life cycle, including coding standards, code reviews, source control management, build processes, testing and operation.
* Knowledge of standards and codes such as UL and NEC.
* Experience working with suppliers.
* Programming experience.
* Knowledge of quality and reliability engineering principles.



If you are interested in the Hardware/Software Engineer job in Phoenix, AZ, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 311786
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Hydraulic Design - Aircraft Hydraulics - China

Description:
Integrated  Hydraulic Design - Aircraft Hydraulics - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Integrated Aircraft Hydraulics Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Experience in designing mechanical products and components, including bolt, hinge, door mechanism, lock, valve, pump and actuators.
  • Working experience in international well-known Hydraulics Companies, institutions or universities, doctoral degree is preferred.
  • Preferred working experience in civil aircraft OEM or related mainstream suppliers.
  • Good command of English listening, speaking, reading and writing.
   Role and Duties:
 
  • Coordinate with overall aerodynamics, performance stability, structure, flight crew control, pilot, electrical system, system strength, customer service, airline customer, manufacturing, airline operation, supplier management and aircraft safety and other related teams to develop world-class competitive mechanical and hydraulic system products.
  • Develop and confirm requirements and interface definitions.
  • Carry out detailed design of new products.
  • Conduct a variety of comprehensive analysis / simulation, using CAD system tools (e.g CATIA V5) and mathematical modelling tools (such as Simulink MATLAB and EASY5).
  • Verify the design and performance through product level, system level and aircraft level tests.
  • Participate in design review and supplier communication management.
  • Participate in airworthiness activities related to client products.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-346
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
The primary responsibilities will include design, manufacture, integration and test aspects of the nose and main landing gear. Specific tasks will include supporting component NCRs, ownership for First Flight Readiness Review documentation, supporting bench testing of subsystems, oleo shock absorber performance drop testing, landing gear integration, landing gear retraction / extension swing testing.

Required Knowledge, Skills, and Abilities:
• 5+ years industry experience with landing gear systems
• Industry experience with landing gear performance requirements
• Industry experience designing, performing initial sizing analysis, and producing technical drawings of components in CAD
• Industry experience with integrated systems testing, test plan writing, and report authoring
• Well versed in Geometric Dimensioning and Tolerancing (GD&T) standards
• Excellent communication skills
• Ability to partner internally and research and interact with potential suppliers

Preferred Knowledge, Skills, and Abilities:
• 5+ years industry experience as a responsible engineer on landing gear
• Experience using Simulink to model landing gear systems
• Experience with modeling and dynamic simulations of fluid-mechanical systems
• Industry experience designing parts, performing stress analysis, producing drawings and working with large assemblies within the SolidWorks environment
• Knowledge of kinematic analysis/synthesis of mechanisms
• Working knowledge of aerospace aluminum and steel alloys, heat treats, and manufacturing processes
• Experience with full life cycle of aircraft system development including design, integration, and test
• Experience developing, refining and managing system level requirements from formal and informal sources
• Experience with manned experimental aircraft flight testing

Degrees and Certifications:
• An undergraduate degree in Aerospace Engineering or Mechanical Engineering is required
 
Job Number: 45-012
Job Location: Denver, CO
Rate: $70-80/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/02/2021
Last Updated: 06/03/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

This role is responsible for the development of technologies and products that leverage advanced technologies to provide discriminating capability to our customers. This requires engagement in every phase of the system development lifecycle including: data collection & test, and verification & validation.

Activities will range from designs for manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designing sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapting machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Computer Skills: Proficient in Microsoft Office including Word, Excel, PowerPoint and Outlook. Working knowledge of Matlab, Catia, Solidworks and other CAD applications a plus
 
Job Location: Stratford, CT
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 04/29/2021
Firm Name: RCM TECHNOLOGIES INC
Attention: James
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/225-5700
Fax Phone: 203/377-6298
Website: www.rcmt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
Previous Gulfstream planning and/or shop floor experience preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15133
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Structures planning and manufacturing modeling experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 15089
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Previous Gulfstream planning and shop floor experience. Advanced knowledge of SAP and Solumina required.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 15139
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer 1

Description:
SSE is looking for Mechanical Systems Design & Analysis Engineer 1 to fill a role in St. Louis, MO.


FULL BENEFITS: includes 12 PAID HOLIDAYS & 13 PTO DAYS per year (NO WAIT PERIOD), 401k match.


JOB DESCRIPTION:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs limited detail design development and modification of mechanical and fluid system installations. Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under close supervision.

Position Responsibilities:
Your duties as a design engineer will include, but are not limited to:
• Create new 3-dimensional layouts for a wide variety of mechanical support equipment (SE) in Unigraphics NX
• Perform detail drawing / design development and modification of structural components and assemblies
• Make engineering design decisions on materials, material processes, finishes, components, and assembly
• Modify or develop and release detail designs, via model based definition or 2-D drawings and parts lists via Teamcenter
• Support internal, informal peer reviews and formal design reviews with USAF and USN customers, as needed
• Perform technical support of manufacturing / fabrication, typically at local suppliers, as needed
• Assist in informal testing of support equipment, including aircraft and/or component physical and functional interface, as needed
• Learn quickly with mentoring / assistance from other design engineers

PREFERRED SKILLS/ QUALIFICATIONS:
• Experience with creating mechanical engineering drawings and/or drawing changes
• Experience in creating 3-D models in CAD
• Experience with a PDM, such as Teamcenter
• Experience working in a team setting
• Some familiarity with mechanical engineering design
• Ability to work flexible hours and occasional overtime

• “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen required

EDUCATION:
• Bachelor’s degree (or higher) in mechanical or aerospace engineering. ABET is the preferred, although not required.
 
Job Number: 44758
Job Location: St. Louis, MO
Rate: BOE
Per Diem: No
Overtime: possible
Duration: 12 months
Start Date: TBD
Input Date: 04/21/2021
Firm Name: SSE INC
Attention: Thomas Bahan
Address: 9666 OLIVE STE 710
City, State: ST LOUIS, MO 63132
Phone: 314/439-4728
Website: www.sseinc.com/careers

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Coordinator

Description:
An Architectural Project Coordinator role located in Las Vegas, NV is currently available through Belcan. The Architectural Project Coordinator will be taught leadership skills and is a person who gets things done with minor supervision and direction by Senior Associates. A Project Coordinator-6 is a Professionally Degreed Graduate Architecture or Engineer, or an Associates Degreed professional with Seven (7) to Ten (10) years of professional experience

Architectural Project Coordinator Job Requirements:

* Assist in coordinating and leading the project team, with direction from the Project Manager, in developing construction contract documents for MID RANGE TO SMALL Building Projects. Engage with the PM and IPT to communicate task assignments, solicit status updates, and maintain program milestone achievement projections.
* Assist the Project Manager with project administration from schematic design phase through construction administration phase.
* A Project Coordinator-6 will be assigned specific responsibilities (as listed under the Project Coordinator-7) for specific projects. As a Project Coordinator-6 skill levels increase, project responsibilities will be increased proportionally, thus allowing Project Managers to effectively manage more projects.
* A Project Coordinator-6 may be called upon to assume full Project Coordinator-7 responsibilities. These assignments will be based on the individual Project Coordinator-6 skill level and the specific project's scope of work.
* Be aware of the project scope and of the Client's objectives, Satisfy Client's goals.
* Responsible for successful execution of the project and construction contract documents. The Project Coordinator is one of the Project Managers resources in organizing, coordinating, researching information, code analysis and troubleshooting the project.
* Receive incoming project information and distribute it to the project team and to outside consultants as directed by the Project Manager.
* Represents the firm in a professional manner and provides the quality control for the preparation of construction contract documents. Follows applicable guidelines for project standards as described in the CAD Manual and the Associates Policy & Procedure Manual.
* Assist with review of preliminary designs; reviews of schedules with labor projections. Provides guidance and training for other Project Coordinators and Technical Associates. Assists with maintaining specific project job files; attends project team meetings; anticipates and interprets problems and recommends solutions; reallocates work as necessary to meet scheduled deadlines; Assists in preparing memos and correspondence to Clients and coordinates correspondence with the Project Manager or Principal In-Charge.

EDUCATION AND EXPERIENCE REQUIRED:
* Professional Degree Graduate Architect/Engineer, or holds an Associate's Degree in Architecture/Engineering with a minimum of Seven (7) to Ten (10) years professional experience.
* Relevant work experience to include experience in all phases of architectural drafting, detailing scheduling, and coordination, plus a good knowledge of civil, structural, mechanical and electrical engineering, or any combination of education and experience that provides equivalent knowledge, skill and abilities.
* Strong computer aptitude to include thorough knowledge of computer-aided drafting and design systems.
* Ability to guide and supervise the work of others.
* Strong organizational skills.
* A thorough knowledge of ALL National Building codes.
* Strong understanding of building materials and construction methods and strong knowledge of procedures for production of construction documents.
* Ability to add, subtract, multiply and divide; perform calculation using fractions, decimals, and percentages; perform algebra, geometry and trigonometric calculations.
* Strong ability to make independent decisions within a general framework.
* Attend in-house seminars and continuing education outside of the office.
* Well-developed analytical and problem-solving skills.

If you are interested in this An Architectural Project Coordinator role located in Las Vegas, NV please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312116
Job Location: Las Vegas, NV
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/03/2021
Last Updated: 12/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Hypersonics)

Description:
Top aerospace client is looking to add a Project Engineer to their Hypersonics group. Role will be to coordinate design and development of air breathing hypersonic propulsion systems.

Duties:

-Under general direction, performs project engineering assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
-Typical responsibilities include: Provides imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques.
-Conceives and plans projects involving the development of new methods to attain objectives.
-Provides direction in problem investigations and resolution across functional areas.
-Prepares technical requirements and design requirements in support of project goals.
-Keeps current within area of specialty in support of project assignments.
-May perform as the engineering cost account manager.
-May provide technical guidance to less senior project engineers and project support personnel.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Erroneous decisions or recommendations or failure to get results may result in serious project delays and considerable expenditure of resources.
-Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:

-Interpersonal skills to effectively interface with all levels of personnel; Ability to communicate clearly and concisely; Ability to read and interpret blueprints and technical drawings; Organizational skill to effectively plan and coordinate schedules, cost and work flow.
-May require the use of engineering test equipment, CAD, and various computer systems.
-Understanding of program and technical requirements necessary to achieve complex technical objectives.
-Ability to operate effectively in a team environment.

Education:

-Bachelor's degree in an appropriate science and five years of related technical experience or equivalent combination of education and experience.

** Candidates must be U.S. Citizens without Dual Citizenship **

** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **
 
Job Number: 82789
Job Location: Jupiter, FL
Rate: $42.00-$54.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 10 Months
Start Date: Now
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Taylor Webb
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - Level 2 / Level 3 (Hypersonics)

Description:
Inconen is looking for a Project Engineer - Level 2 / Level 3 (Hypersonics) for our client, a well-known Aerospace Company, in Jupiter, FL.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

Duties
-Role will be to coordinate design and development of air breathing hypersonic propulsion systems.
-Under general direction, performs project engineering assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
-Typical responsibilities include: Provides imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques.
-Conceives and plans projects involving the development of new methods to attain objectives.
-Provides direction in problem investigations and resolution across functional areas.
-Prepares technical requirements and design requirements in support of project goals.
-Keeps current within area of specialty in support of project assignments.
-May perform as the engineering cost account manager.
-May provide technical guidance to less senior project engineers and project support personnel.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Erroneous decisions or recommendations or failure to get results may result in serious project delays and considerable expenditure of resources.
-Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
-Interpersonal skills to effectively interface with all levels of personnel; Ability to communicate clearly and concisely; Ability to read and interpret blueprints and technical drawings; Organizational skill to effectively plan and coordinate schedules, cost and work flow.
-May require the use of engineering test equipment, CAD, and various computer systems.
-Understanding of program and technical requirements necessary to achieve complex technical objectives
-Ability to operate effectively in a team environment.

Education:
-Bachelor’s degree in an appropriate science and five years of related technical experience or equivalent combination of education and experience.
 
Job Number: 12878
Job Location: Jupiter, FL
Rate: Level 2 = $40.00 - $42.00/HR / Level 3 = $50.00 - $54.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 Mos
Start Date: ASAP
Input Date: 04/21/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project and Component Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Project and Component Engineer – Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret Clearance desired but not required **

Duties:
-Position is for a development engineer in support of development of rocket engine combustion devices hardware in missile defense systems. Knowledge of pressure-fed hypergolic propellant systems is desirable.
-Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
-Supports combustion devices hardware through the entire product life cycle.
-Analyzes and verifies product design and performance for adequacy and reliability.
-Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
-Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Skills:
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
-Ability to read and interpret blueprints, technical drawings and specifications;
-Ability to communicate clearly and concisely;
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.

Education:
-Bachelor’s degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 15140
Job Location: Canoga Park, CA
Rate: Level 2 = $45.00 - $50.00/HR / Level 3 = $55.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 04/10/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability & Maintainability Engineer

Description:
Hi,



Hope you are doing well, please let me know if you are interested in below position.



Role: Reliability & Maintainability Engineer

Location: Ft. Worth TX

Duration: Contract.

Job ID: 35280



Position Responsibilities:
• Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
• Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Assess manufacturing Parametrics and maintenance removal times.
• Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
• Perform budget estimating and management tasks.
Qualifications

Education Requirements:
• Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.


Position Requirements:
• Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
• Proficiency in Microsoft Office
• Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
• Candidates must be eligible to obtain Secret Security Clearance

Preferred Skills:

• Prior military experience maintaining rotory or tiltrotor aircraft.
• Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
• Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
• Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
• Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
• Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
• Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
• Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
• Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
• Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).
 
Job Number: 35280
Job Location: Ft. Worth, TX
Rate: $75
Input Date: 04/30/2021
Firm Name: BRAVOTECH
Attention: Sandy Singh
Address: 18111 PRESTON RD STE 630
City, State: DALLAS, TX 75252
Phone: 903/815-1590
Website: www.bravotech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
804 Technology is currently looking for a Reliability Engineer for a long term contract job opportunity located in Fort Worth TX. The Reliability Engineer will collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards. Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation. Assess manufacturing parametrics and maintenance removal times. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

Pay: $65-70/hour based on experience and Per Diem is available to those that qualify.
Location: Fort Worth TX 76118

Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description/Comment:
Position Responsibilities:
• Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
• Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Assess manufacturing parametrics and maintenance removal times.
• Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
• Perform budget estimating and management tasks.

Qualifications
Education Requirements:
• Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.
• Position Requirements:
• Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
• Proficiency in Microsoft Office
• Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
• Candidates must be eligible to obtain Secret Security Clearance

Preferred Skills:
• Prior military experience maintaining rotory or tiltrotor aircraft.
• Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
• Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
• Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
• Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
• Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
• Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
• Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
• Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
• Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).


I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
 
Job Number: Reliability 804
Job Location: Fort Worth, TX
Rate: $65-70/hour
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 06/11/2021
Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Designer/Checker Engineer

Description:
Job Description:
As a Tooling Designer / Checker you will be responsible for developing design concepts and producing efficient designs that support Aerospace requirements. You will also be responsible for checking the drawings of other engineers and designers in the department for compliance to department and industry standards as well as constructability.
Responsibilities for a designer include but are not limited to the following:
• Develop tooling concepts and support Tool Engineers in developing drawings.
• Have a working knowledge of material strengths and engineering applications to assure compliance to requirements.
• Interface with design review teams to assure customer satisfaction with design.
• Manage multiple projects at once and create efficient designs to meet the program cost and schedule requirements.
• Have the ability and knowledge to check drawing against department standards.
• Work alongside the Tool Engineer to ensure overall program quality, delivery, and cost objectives are achieved.
• Work with internal Customers to concept needed support equipment for new and existing programs.
• Developing tooling concepts, creating/reviewing and improving manufacturing processes to meet Customer requirements.
• Work closely with Tool Engineers to create final drawings
• Understand design costs and schedules
• Review drawings and designs for manufacturability and completeness.
• Support Continuous Improvement
Responsibilities for a checker include but are not limited to the following:
• Evaluate tool designs for compliance to standards (IPHM, HOPS,), as well as industry dimension and tolerancing standards (ASME Y14.5M-2009).
• Evaluate design to determine manufacturability of tool design including proper dimensioning to produce an acceptable, functional tool.
• Evaluate design for functionality to ensure tool will perform per user request.
• Review design package for completeness.
• Communicate the changes needed in a concise but direct manner.
• Build productive, positive relationships with other team members.
Requirements:
• Bachelor’s degree plus minimum 5 years’ experience in Mechanical design.
• Hands on or working knowledge of Machining and/or Fabrication practices.
• Hands on knowledge of ASME Y14.5M-2009, Dimensioning and Tolerance Standard.
• Experience with NX CAD systems
• Lean Manufacturing principals
• Good problem-solving skills
• Strong oral and written communication skills
• Good organization and multi-tasking skills
• Technical attention to detail on past projects and assignments.
 
Job Number: 4.30.21
Job Location: Salt Lake City, UT
Rate: $60.00
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 04/30/2021
Firm Name: TRACKER ENGINEERING
Attention: Rick Sparks
Address: 3837 S 2700 E
City, State: SALT LAKE CITY, UT 84109
Phone: 801/815-8200

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Digital Hardware Engineer

Description:
A Senior Digital Hardware Engineer role located in Chandler, AZ is currently available through Belcan. The Senior Digital Hardware Engineer product design and manufacturing technologies and families include but are not limited to:

Up/Down Converters Hybrid Microelectronics
Switch Filter/Amplifier Assemblies Surface Mount Technologies
Sources & Synthesizers Integrated Multichip Modules & Assemblies
Transceivers Monolithic/Hybrid/Discrete Components
Receiver Exciters Analog/Digital Control Electronics

The Engineer's role involves full life-cycle product development from system concept and requirements through design, production, and verification, working in integrated product teams spanning RF Design Engineering, Manufacturing, and Program Management.

Senior Digital Hardware Engineer duties:

* Hardware and firmware development and verification for PIC/microcontrollers and FPGAs
* Design, develop and test digital subsystems using CPLDs, FPGAs and or discrete logic
* Schematic capture and board layout using PADS
* Design complex multi-layer mixed signal digital control boards
* Use of basic test equipment for analysis and debugging of analog and digital circuits including
oscilloscopes, logic analyzers, power supplies, and function-generators (familiarity with signal
synthesizers, spectrum analyzers and other RF equipment desired)
* Data bus I2C, SPI, RS422, RS232, UART
* Conversion of customer requirements to required hardware and firmware design
* Hands on resolution of technical problems during test and integration
* Generate and review technical product documentation, ICD's and presentation documentation for
customer design reviews
* Work effectively with all functional groups to achieve product performance and cost targets.
* Build quality and manufacturability into the design. Define/understand/comply with company and
regulatory guidelines to assure a safe operating environment
* Understand, decompose, and define product and process requirements to support product
development, sustaining and R&D
* Generate and review product development documentation including proposals, technical reports,
procedures, correspondence, etc. necessary to satisfy customer and program requirements.
* Self-directed and motivated while working and communicating effectively within a team
environment that consists of RF design engineering, operations, quality, and business disciplines
* Design test equipment hardware and software, select and procure equipment necessary to
obtain desired results and accuracy, integrate and/or build automated test systems of low or
medium complexity
* Design, code and debug computer/data acquisition systems necessary for
automated testing.

EDUCATION AND EXPERIENCE REQUIRED:

* Education/Certification: BA or BS Degree in an engineering discipline. Masters or PhD preferred.
* Experience: min of 5-10 years of relevant work experience
* Experience programming using C in an embedded environment a plus
* Experience in PADS a plus
* Experience with Xilinx Spartan 7, Xilinx Zynq-7000, and LabVIEW a plus
* Experience with Automated test system design, and programming of data acquisition systems a
plus
* LabVIEW, TestStand, or similar system-design platforms. SPICE, CADs, Schematic Design and
Layout
* Expertise in digital component design and analysis, modeling and simulation, layout and circuit
level design and test
* Product development experience with meeting customer schedules is needed

If you are interested in this Senior Digital Hardware Engineer role located in Chandler, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 311838
Job Location: Chandler, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/22/2021
Last Updated: 08/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Project Component Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Senior Project Component Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret clearance preferred but not required **

Job Summary:
-Seeking a Senior Engineer to join our Valves and Actuators team in the Project and Component Engineering department in Canoga Park, CA (Los Angeles area).
-You will join a team working on the development, fabrication and test of propulsion system valve and actuator hardware.

Duties:
-Under general direction, the Project Component Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.

-25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
-25%: Supplier integration with external suppliers ensuing requirements is achieved on time and within budget.
-20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
-20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
-10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with rocket rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to aerospace valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years of experience in related field. MSME/AE degree is highly desirable.
 
Job Number: 15172
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 04/20/2021
Last Updated: 06/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project and Component Engineer

Description:
** This is NOT a Designer role. This is a Project Engineer role **

Candidates should have 3 years of related work experience

Education: A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills and Experience:
Required Skills:
ACTIVE SECRET CLEARANCE
PROJECT ENGINEER
AEROSPACE ENGINEERING
Additional Skills:
CORRECTIVE ACTION
COMPONENT-LEVEL
AEROSPACE
ELECTRICAL AEROSPACE
FABRICATION
INTEGRATION
INTEGRATOR
LIFE CYCLE
PRODUCT DESIGN
PRODUCT ENGINEER
ENGINEER
SYSTEMS INTEGRATION
TEST PLANS
 
Job Number: 82878
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 06/24/2021
Last Updated: 07/06/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Roby Lane
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Drafter

Description:
A Sr. Drafter role located in Oxnard, CA is currently available through Belcan. The Sr. Drafter will apply scientific principles to design, structure development, machines, tools, systems or manufacturing processes. Predicts operation and economics of items under specific operating conditions.

Sr. Drafter duties:

* Creates and modifies detailed drawings using CAD hardware and software from sketches,
layouts or notes provided by engineering.
* Completes details of major layout drawings prepared by others in accordance with standard
engineering drafting practices.
* Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA.
* Incumbent works from data such as previous drawings, layouts, detailed sketches, notes, verbal
instructions, and standard references directed by engineers.
* Contributes design modifications to facilitate manufacturing operation or quality of product.
* Checks drawing plots versus the project input for correctness and conformance to standards.
* Works with engineers regarding model accuracy, design, drafting standards and ECN/ECR
documentation.
* May work with system management including file maintenance, backup and storage.
* Final drawings must display completeness, clarity, and accuracy.

EDUCATION AND EXPERIENCE REQUIRED:

* 5 years of experience in the RF industry or equivalent.
* Experience using Solidworks.
* AutoCAD.
* Autodesk Inventor is a plus.
* Experience in Microsoft Excel, PowerPoint, Word etc.

If you are interested in this Sr. Drafter role located in Oxnard, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 310161
Job Location: Oxnard, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 03/09/2021
Last Updated: 06/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural / Payloads Design Engineer 2

Description:
SSE is looking for Structural / Payloads Design Engineer 2 to fill a role in St. Louis, MO.

FULL BENEFITS: includes 12 PAID HOLIDAYS & 13 PTO DAYS per year (NO WAIT PERIOD), 401k match.

JOB DESCRIPTION:
Assists to develop, integrate and document structural and interior payload system requirements to establish the system design. Develops, maintains and modifies basic structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs tests to validate and verify systems and components meet requirements and specifications. Assists with supplier development, test and production activities and coordination with the supplier to optimize the design and achieve program goals. Supports investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general supervision.

Position Responsibilities:
Your duties as an engineer will include (but are not limited to):
• Engineering reach back to the prime organization, mechanical, structural, manufacturing engineering and systems engineering.
• Develop recommendations for supplier related issues and coordinate with Supplier Management.
• Implement design changes on spares configurations and new manufacturing processing.
• Develop and implement continuous improvements plans to provide more efficiencies in spares design and fabrication that provide value to Boeing and the customer.
• Develop and implement plans to improve supplier coordination to ensure compliance with the requirements.
• Assists in Model Based Definition activities, converting 2D drawings to 3D models.

Required Skills and Experience:
• Experience with CATIA, Unigraphics (NX) or other 3D Computer aided design tools.
• Minimum 1 year of experience using the following Computer Aided Design (CAD) tools: Teamcenter & Unigraphics

Preferred, Skills and Experience:
• Experience working with or supporting military aircraft
• Ability to prioritize work and manage multiple projects and programs
• Experience working in a cross functional environment

• “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen required.

Education:
• Bachelor's Degree or higher from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
• ABET accreditation is preferred.
 
Job Number: 44767
Job Location: ST LOUIS, MO
Rate: BOE
Per Diem: No
Overtime: No
Duration: 12 months
Start Date: TBD
Input Date: 04/21/2021
Firm Name: SSE INC
Attention: Thomas Bahan
Address: 9666 OLIVE STE 710
City, State: ST LOUIS, MO 63132
Phone: 314/439-4728
Website: www.sseinc.com/careers

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
Our Client is seeking a structural analyst responsible for analysis and testing of subsystem structural components using finite element computer codes and classical analysis methods.
Determine most efficient, yet sufficiently thorough method of solving problems.
Utilize knowledge of aerospace materials, structural testing, and basic structural analysis concepts such as strength of materials, stress analysis, and structural dynamics.
Develop finite element models of components and assemblies using CREO, PATRAN, FEMAP, and NASTRAN software.
Perform design factor of safety and margin of safety analysis using strength of materials theory and classical methods.
Process the models to obtain static and dynamic responses to launch, test, and ground handling environments, including definition of test requirements, design of test configuration, administration of tests, and writing test reports.
Ensure all inputs are understood and clearly communicate analysis outputs through standardized report formats.
Perform other duties as required.
Familiarity with advanced composite materials and spacecraft structures is preferred.
Good verbal and written communication, organization and leadership skills are essential.
Position Requirements: Minimum skills are those required to perform the essential functions of the job. Related work experience is a minimum of five (5) years with a B.S. degree or three (3) with a M.S degree.
Minimum BSME, BSCE or related field required.
Experience with CAD Design and Finite Element Analysis software is required.


Experience with Microsoft Office Suite (Outlook, Word, Excel and PowerPoint) is required.
Join a challenging and fast paced group that performs subsystem and system analysis and test!
Develop subsystem structural requirements and structural analysis guidelines to support those requirements. You will also be performing testing and model correlation in development of subsystem structural requirements.
 
Job Number: 82884
Job Location: Palo Alto, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Kristan Anderson
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Payload Design Engineer

Description:
Bachelor's degree or higher from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Minimum 1 year of experience using the following Computer Aided Design (CAD) tools: Teamcenter & Unigraphics.
Engineering reach back to the prime organization, mechanical, structural, manufacturing engineering and systems engineering.
Develop recommendations for supplier related issues and coordinate with Supplier Management.
Implement design changes on spares configurations and new manufacturing processing.
Develop and implement continuous improvements plans to provide more efficiencies in spares design and fabrication that provide value to client and the customer.
Develop and implement plans to improve supplier coordination to ensure compliance with the requirements.
Assists in Model Based Definition activities, converting 2D drawings to 3D models.
 
Job Number: SDE-MO
Job Location: Hazelwood, MO
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/21/2021
Last Updated: 06/07/2021
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer & Tool Engineer

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications (Required):
• Computer Aided Design Tools
Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).
 
Job Number: TD_AZ
Job Location: Mesa, AZ
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 04/29/2021
Last Updated: 05/13/2021
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Inspector Sr.

Description:
Inconen is looking for a Tooling Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Education and Experience Requirements:
High school diploma/GED. Valid Driver’s License required. Must be proficient in blueprint reading/interpretation, shop math, and quality control manual as required. Eight (8) years technically related experience to include at least six (6) years related inspection experience.

Other Requirements: 1. Ability to import and export inspection data in many different formats (Word, Excel, PDF, etc.). 2. Model Base systems (Cadam, Catia V4, Catia V5) experience preferred. 3. Must be proficient in use of inspection tools and equipment. 4. Must be proficient in use of conventional optical measurement equipment. 5. Must be competent with theodolite and laser tracker systems. 6. Ability to recognize potential problems with drawings and elevate to management. 7. Must be competent with coordinate measurement machines (CMM). 8. Must be competent with electronic tool record keeping system. 9. Must be able to lift up to 40 pounds & pass the vision test as required by area job responsibilities. 10. Must have good communication skills.

Position Purpose:
Under limited supervision, performs inspection duties and assists other tooling inspectors in general and technical aspects of Quality Control in a specified area of tooling inspection.

Principal Duties and Responsibilities:
Essential Functions: 1. Prepares inspection documentation and maintains files as required. Ensures current engineering revisions are incorporated per established procedures. 2. Performs periodic inspections to ensure compliance per FAA requirements and approved quality procedures. 3. Creates Model Base inspection processes using CATIA model-based tool designs that can be used for both fabrication and rework of tools by the tool shop personnel. 4. Analyzes data using Metrologic inspection software and create electronic quality folders in SmarTeam to store inspection data for all model-based tooling. 5. Promotes and maintains quality standards and processes. 6. Works with tooling suppliers to ensure the inspection data is correct and in the proper format on all incoming tools. 7. Makes recommendations to Tooling Management on continuous improvements in the tooling inspection area. 8. Ensures proper use and storage of area tools, equipment and supplies. Advises management of any associated problems or other requirements.

Additional Functions: 1. Assists other inspectors as required. 2. Performs other duties as assigned.
 
Job Number: 15134
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/15/2021
Last Updated: 08/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
UG NX vs. 18 or 19 Senior Designers

Description:
Seeking UG NX 18 or 19 Sr. Designers for 6-12 month CONTRACT:

Minimum 9 years of design/drafting experience using UG NX CAD system. RECENT UG NX vs. 18 OR 19 experience mandatory!!
GD&T and MILSPEC/STD's background too!
Email your resume and then call Peggy at 774-210-4108 to discuss!
 
Job Number: PL- NX- PA
Job Location: York, PA
Rate: $51.50 per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2-3 weeks
Input Date: 03/01/2021
Last Updated: 06/08/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Back to Advanced Job Search