Job Search Results

247 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2022/09/28 Wednesday 06:38AM Pacific Time by ContractJobHunter. )

Listings 1 - 247

Go To My Job Tracker

Expand all descriptions

A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Fort Lauderdale, Florida.

Job Summary:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Job Duties:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc…
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions
Consults the Maintenance Lead if technical assistance is needed during the repair process
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer
Completes work package documentation by signing/stamping after finishing all designated operations
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness
Provides supervisor with performance statistics and other operational data, as requested
Properly accounts for time and materials used in all inspection and maintenance activities
Essential Knowledge, Skills & Abilities:
High School/ GED
A&P and / structures experience a plus
A&P License
Minimum 2 to 5 years’ experience with small aircraft/ general aviation trained in one aircraft type
Proficient and demonstrated skill with the aircraft
Several years or actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.)
Proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions
Experience using power or pneumatic hand tools
Assignments require Standard Knowledge of a Technical Area
Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level
Performs moderately complex Technical Assignments
Assists Advanced Level Technicians on more complex technical assignments
Knowledge of machines and tools, including their uses, repairs and maintenance
Knowledge of principles and processes for providing customer service
Skilled with repairing, troubleshooting, installing and equipment maintenance
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 39691
Job Location: Fort Lauderdale, FL
Input Date: 09/20/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Sabrina Craig
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Email: Sabrina.Craig@ststechnicaljobs.com
Website: www.stsaviationgroup.com

A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Kinston, North Carolina.

Position Overview:

The aircraft maintenance mechanic must accurately repair and perform scheduled maintenance on all airplanes, as well as perform inspections as required by the Federal Aviation Administration (FAA).

Duties/Responsibilities:
Performs regular maintenance on aircraft.
Professionally trains and leads other employees in proper work techniques.
Project Management; Accurately estimates work time and materials for scheduled jobs.
Fully analyzes all required blueprints, drawings, work orders and sketches to troubleshoot, repair and install desired product or part.
Detects errors and corrects through proper departmental channels.
Ensures proper working condition of mechanical systems before flight.
Develops and maintains records of maintenance, repairs, inspections, and any reports related to parts or services.
Inspects and examines engines, wings, propellers, tails, and other parts to identify cracks, corrosion, or other defects.
Inspects hoses and lubricates joints; replaces any that show signs of needing repair.
Consults maintenance manuals and specifications to identify correct operations and specifications for replacements or repairs.
Installs new parts to replace or repair defective or recalled parts or to enhance the performance of the aircraft; performs these tasks efficiently and to specifications.
Repairs sheet metal as needed.
Ensures proper function of engines and operating systems via a variety of tests and tools.
Identifies and resolves mechanical problems based on visual inspections or reports from pilot or crew.
Collaborates, as needed, with airframe and power plant (A&P) mechanics or other appropriate personnel to repair engines and non-instrumental parts.
This position requires up to 5 percent travel. Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected. Performs other related duties as assigned.
Required Skills/Abilities:
Thorough understanding of aircraft parts, systems, and mechanics.
Thorough understanding of tools and testing methods used to ensure proper functioning of an aircraft and its parts, systems, and mechanics.
Ability to read, comprehend, and adhere to manual instructions to resolve complex mechanical issues.
Proficient in Microsoft Office Suite or related software used to complete and maintain records.
Detail-oriented with mechanical inclination. Superior and careful workmanship.
Leadership and team oriented.
Ability to perform consistently under stressful conditions.
Ability to perform basic inspections and repairs.
Ability to learn new skills and methods of repairs.
Sufficient oral and verbal communication skills, as needed, to discuss equipment malfunctions and complete reports.
Must be authorized to work lawfully in the United States, must provide two forms of Federal Identification. Education and Experience:
High school diploma or equivalent required.
A&P mechanic certification by the FAA required (Airframe only with timeline for obtaining Powerplant certification).
Minimum three years transport-category jet aircraft-related experience or have demonstrated knowledge, skills and abilities required to perform all job tasks. Extensive knowledge of all aircraft mechanical systems functions and interactions. Thorough working knowledge of all current FAA regulations, IPM and ATA codes
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a recruiting professional directly, please call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 42092
Job Location: Kinston, NC
Input Date: 09/20/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Joshua Schlesner
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Email: Joshua.Schlesner@ststechnicaljobs.com
Website: www.stsaviationgroup.com

A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36242
Job Location: Oscoda, MI
Input Date: 09/20/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Joseph Richard
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Email: Joseph.Richard@ststechnicaljobs.com
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
An Advanced Engineering Technician job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's Degree in a related discipline, plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Engineering Technician Job duties:

* Interprets basic engineering drawings, diagrams and schematics.
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems.
* Conducts, analyzes and documents statistically based experiments to define process parameters.
* Implements and documents complex solutions for process improvement.
* Designs and constructs basic tooling and fixtures to accomplish unique tasks.

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.
* Solid knowledge and proficiency in the use of fabrication tools.
* Ability to fabricate complex hardware.
* Solid knowledge of generally accepted technical theory.


If you are interested in this Advanced Engineering Technician position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 325515
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/06/2022
Last Updated: 08/08/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician (Secret)

Description:
An Advanced Engineering Technician 2nd Shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's Degree in a related discipline, plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Engineering Technician 2nd Shift Job duties:

* Interprets basic engineering drawings, diagrams and schematics.
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems.
* Conducts, analyzes and documents statistically based experiments to define process parameters.
* Implements and documents complex solutions for process improvement.
* Designs and constructs basic tooling and fixtures to accomplish unique tasks.

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.
* Solid knowledge and proficiency in the use of fabrication tools.
* Ability to fabricate complex hardware.
* Solid knowledge of generally accepted technical theory.


If you are interested in this Advanced Engineering Technician 2nd Shift position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 324549
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/02/2022
Last Updated: 08/23/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Software Engineer

Description:
An Advanced Software Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for performing infrastructure requirements analysis, participate in research, design, development, and test of software and tools, to include development of new work products or enhancing existing applications, systems, or embedded products. To be considered for this role, you will have a Bachelors Degree in Software Engineering or a related Science, Engineering or Mathematics field, plus a minimum of 5 or more years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Software Engineer Job duties:

* Software application development (primarily Java) in a process-oriented organization.
* Maintains hardware, software, and related components of project.
* Leverages scaled agile ceremonies, practices, and organization to plan, communicate, develop, and deliver Minimum Viable Product (MVP) solutions.
* Researches and analyzes data, such as customer design proposals, market trends, state of technology and industry, specifications, and manuals to determine feasibility of design.


Qualifications:

* Proficient ability to use the appropriate standards, processes, procedures, and tools throughout the software development life cycle to support the generation of technical engineering products.
* Software C/C++ and Java Development.
* Capable of working on problems of diverse scope requiring extensive analysis of data and evaluation of a multitude of factors.
* Skilled in communicating issues, impacts, and corrective actions.
* Remote available


If you are interested in this Advanced Software Engineer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 322779
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/06/2022
Last Updated: 08/17/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Systems Engineer (Electrical Design)

Description:
An Advanced Systems Engineer (Electrical Design) job in McLeansville, NC is currently available through Belcan. In this role, you will be responsible for performing requirements analysis, review, and management at all levels (system, sub-system, component, etc.). To be considered for this role, you will have a Bachelor's degree in Systems Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Systems Engineer (Electrical Design) Job duties:

* Performs technical functional analysis, performance analysis, system design, and participates in detail trade studies.
* Performs systems integration, test planning and documentation, and test execution (verification), validation and interface definition studies of subsystem or system elements under supervision of the lead systems engineer.
* Performs technical planning, cost and risk analyses, and supportability and effectiveness analyses for subsystems and system elements.
* Perform technical system modeling and simulation testing.
* Defines processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility.

Qualifications:

* Expert Proficiency in the use and understanding of traditional Systems Engineering concepts, principles, and theories.
* Expert Proficiency in Electrical Engineering concepts, principles, and theories - specifically control system hardware, circuit cards, and sensors.
* Expert Proficiency in the design, layout, test, and integration of CCAs (Circuit Card Assemblies).
* Expert Proficiency with schematic capture and PCB layout, Xpedition Designer proficiency preferred.
* Proficiency with test equipment such power supplies, data acquisition units, oscilloscopes, and digital multi-meters.
* Proficiency with simulation tools such as MATLAB and LTSPICE.
* Familiarity with electronic design for EMI, shock, thermal, and vibration.
* Familiarity with requirements management tools (DOORS).

If you are interested in this Advanced Systems Engineer (Electrical Design) position in McLeansville, NC please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 326156
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/30/2022
Last Updated: 09/20/2022
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Aerospace Designer (NX)

Description:
An Aerospace Designer job in Cincinnati, OH is currently available through Belcan. In this role, you will be developing 3D models and working with Detailers to create 2D drawings of pre- and post-production detail parts, assemblies, sub-systems, and integrations for aircraft engines. A Government Secret Clearance is needed or the ability to obtain one is a requirement for these positions.
Principle Responsibilities:
1. Using engineering design basis requirements, determines the appropriate design package.
2. Coordinate with the Project Manager/Senior Designer, on technical design, form fit and function.
3. Works with design group assigned to project, in the development and final completion of the design package for issue to client.
4. Prepares various drawings and discipline design documents such as specifications, material and equipment lists, change orders, transmittals, etc., as required.
5. Ensures compliance with established design standards and practices.
6. Ensures operability and maintenance.
7. Assists in mentoring and training of detailers as required.
8. Documents all agreements and understandings reached with other disciplines and client personnel.
9. Resolves client questions or field problems concerning the design package.
10. Identifies design scope changes and their impact.

Required Qualifications:

· Strong parametric CAD design utilizing NX and TeamCenter.
· Microsoft Office Suite experience
· Proficient use of ANSI/ASME Y14.1-2009 design and drafting standards including GD&T applications
· Experience with reviewing engineering drawings and related documents for technical accuracy
· Excellent communication and interpersonal skill
· Ability to function with minimal supervision
· Able to efficiently multitask and flexible enough to meet evolving customer prioritization of tasks
· Legal authorization to work in the U.S. is required/must be U.S. Citizen or U.S. Person

Preferred Qualifications:
· NX is the preferred CAD software
· Experience with Stack-ups
· Familiarity with aerospace manufacturing processes but not required.
· Experience working in aerospace field, specifically Turbine engine experience
· Experience Casting, Forgings and Machining's.
· Experience with Model Based Definition (MBD) is a plus but not required.
Environment:
Office sedentary; use of work phones, computers, printers, and general office equipment.
Physical Demands: No exposure to field conditions or manufacturing environments.
Travel: 0%
Qualifications:
A. Education: Associate degree or equivalent experience.
B. Minimum Experience: Minimum of an associate degree in drafting from an accredited vocational/technical institute
C. Preferred Experience: Minimum of two (2) year industrial drafting or the equivalent of an associate degree in drafting from an accredited vocational/technical institute; or a degree from four (4) year bachelor's degree in engineering field.
D. Technology: Proficient in the use of CAD and other computer processing tools.

 
Job Number: 318185
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/05/2022
Last Updated: 09/28/2022
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
City, State: Belcan - Recruiting
Email: awdonofrio@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=318185&job_number=318185

Aerospace Tool & Die Engineer

Description:
Seeking Principal Tool Engineer for defense aerospace company in El Segundo, CA for 12+ months CONTRACT
US Citizen required
CLEARABLE – not needed walking in (prior secret w clean background)
Must pass Drug Test & Background Check

Job Description
Seeking a Principal Engineer Tool Design to join our team of qualified, diverse individuals.

The selected candidate works with program management on industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Acts as tool integration focal and follows tooling proposals, cost estimates, master schedules, and acts as cost account manager focal for the department. Knowledge of tool manufacturing process is required for this role as well as tool inspection methods such as laser inspection.

A successful Principal Tool Engineer shall be able to understand the tool manufacturing process, create schedules and budgets as well as put proposals together. This person shall be able to conceptualize tool designs, and understand tool drawings for fabrication.

The Tool Engineer, while being the principal contributor and/or leader, shall work with internal/external customers, and colleagues to ensure that the tool fabrication meets the customer needs and see it through each phase of the productions process.

In addition, it is essential that this person have the ability to mentor less experienced engineers/technicians, work autonomously and in a team environment, adapt to processes and company policy while providing input or methods of process/design innovation.

Duties
Duties include, but are not limited to:
• Execute and prepare meetings with leadership including program management to status and provide project updates.
• Process tracking via Earned Value Management System (EVMS).
• Execution/Lead/Coordination of design and fabrication requirements for tools and fixtures with customers, both internal and external.
•Conduct root cause failure investigations and implement associated corrective actions.
•Lead and Assist Product Development Team with new product releases to ensure manufacturability, validate process/technology.
• Responsible for tracking cost management aspects of program regarding tool manufacturing.

Basic Qualifications:
• Bachelor’s Degree with 5 years of experience in medium to large scale tooling fabrication and/or production fabrication including composites, metallic, coatings application, and/or production manufacturing operations OR Master's Degree with 3 years of experience OR 9 years of experience in lieu of a degree
•The ability to obtain and maintain a DOD Secret Clearance within a reasonable period of time, as determined by the company to meet its business need
***This CONTRACT that does NOT include any paid holidays, paid vacation or sick days***
If qualified, email a WORD version copy of your resume and then call Peggy at 774-210-4108 to discuss.
 
Job Number: PL-Tool Eng.CA
Job Location: El Segundo, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 2-3 weeks
Input Date: 06/13/2022
Last Updated: 09/27/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Maintenance Technician (South Carolina)

Description:

Location: North Charleston, SC

Very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for per diem and overtime Sick pay, and holiday pay for those who qualify

Summary:


Flight Readiness Technician B

Performs final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery.
On this assignment teammates are expected to work safely with the highest quality and integrity. Collaborate with humility inclusion and transparency and respect one another and advance a global, diverse team.
The assignment requires teammates to perform final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery.
KEYWORDS: composites, commercial aircraft, rework OR modifications, pre flight, post flight, routine checks, fuel run, engine run, A&P license.
Looking for exp with live aircraft need this exp, 1-7 years exp on aircraft maintenance and aircraft structures, mx includes hydraulic, pneumatic, electrical, propulsion.

Required Skills/Experience
1-7 Years experience in the following:

1. Pre Flight- Post Flight- troubleshooting- working on live aircraft
2. Aircraft maintenance and repair
3. Major dispatch services
4. Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations.
5. Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company.
6. Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics).
7. Knowledge of quality systems (e.g., inspection process, Company quality procedures).
8. Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy.
9. Must be able to stand, lift up to 35lbs and climb stairs
10. Will be working outside in the elements 100% of the time- Outside on the flightline in all seasons.
11. 787 or composite aircraft experience required

Preferred:
A&P License
Must be available to work 1,2,3 shift as business needs change

Typical shift times:
5:30am- 2pm
2:30am-11pm
11pm-6am
2021 FRTI Assignment tenure Bonuses do not apply to this req; ensure your recruiters are aware and are not discussing this as a perk.
Additional Skills:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2801-2785-11534
Job Location: North Charleston SC
Per Diem: --
Overtime: --
Start Date: 2022-07-07
Input Date: 01/28/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Support Mechanics (REQ# 32800)

Description:
STS Technical Services is hiring Aircraft Support Mechanics in Atlanta, Georgia.

Job Summary:
Preferred Fulltime Employee contract Aircraft Support Mechanic (ASM) performs various tasks using appropriate equipment in the use of technical functions related to Aircraft Maintenance.
These tasks include, Airframe and Engine/Component Mtc .
This position may require other technical functions as developed.
This position requires a working knowledge, understanding and familiarity with approved manuals and procedures as associated with the job function.
Practices safety conscious behaviors in all operational processes and procedures.
Performs various tasks using appropriate equipment to assist mechanics in non-technical functions related to aircraft interior or cargo bin component changes such as those involving slide panels, carpeting, flooring, light bulb changes, seat operational checks, commissary/catering equipment and cargo container repairs.
May require other non-technical functions as developed.
Practices safety conscious behaviors in all operational processes and procedures.
Qualifications:
The PFE ASM position requires a high school diploma or equivalent.
An Airframe and Powerplant license and Avionics experience is preferred, but not required.
A minimum of one license is required along with the ability to secure the second license within 12 months of employment.
Candidate must be willing to work rotating or fixed shifts.
Additionally, candidate must be able to read and write English and comprehend and apply information contained in technical manuals.
Candidate must also be able to work and operate in a safe and compliant manner.
Must be able to work without close supervision.
Candidate should have strong organizational skills and be able to respond to changing or multiple work demands.
Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems.
Must achieve a satisfactory score on tests structured to determine the ability to perform essential job functions.
Must meet the physical requirements which qualify a person to perform essential job functions.
Must be able to multi-task and work under pressure.
Additional Requirements:
Have a valid driver's license
Be able to DOT drug test
Be authorized to work in the US
Have the ability to work a flexible schedule including weekends and holidays
Successfully Complete full AMT testing ( 4 )  Mechanical Aptitude, Spatial Relations, Job Orientation, Troubleshooting
Successfully complete Delta Pre- Employment  Screening
Equal Opportunities for Everyone:
STS Technical Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
STS Technical Services is committed to the full inclusion of all qualified individuals. In keeping with our our commitment, STS Technical Services will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact our team at 1-800-359-4787.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 42353
Job Location: Atlanta, GA
Input Date: 08/05/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Jennifer Flintrop
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Support Mechanics (REQ# 32807)

Description:
STS Technical Services is hiring Aircraft Support Mechanics in Detroit, Michigan.

Job Summary:

Preferred Fulltime Employee contract Aircraft Support Mechanic (ASM) performs various tasks using appropriate equipment in the use of technical functions related to Aircraft Maintenance. These tasks include, Airframe and Engine/Component Mtc . This position may require other technical functions as developed. This position requires a working knowledge, understanding and familiarity with approved manuals and procedures as associated with the job function. Practices safety conscious behaviors in all operational processes and procedures.

Performs various tasks using appropriate equipment to assist mechanics in non-technical functions related to aircraft interior or cargo bin component changes such as those involving slide panels, carpeting, flooring, light bulb changes, seat operational checks, commissary/catering equipment and cargo container repairs. May require other non-technical functions as developed. Practices safety conscious behaviors in all operational processes and procedures.

Qualifications:
The PFE ASM position requires a high school diploma or equivalent.
An Airframe and Powerplant license and Avionics experience is preferred but not required.
A minimum of one license is required along with the ability to secure the second license within 12 months of employment.
Candidate must be willing to work rotating or fixed shifts.
Additionally, candidate must be able to read and write English and comprehend and apply information contained in technical manuals.
Candidate must also be able to work and operate in a safe and compliant manner.
Must be able to work without close supervision.
Candidate should have strong organizational skills and be able to respond to changing or multiple work demands.
Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems.
Must achieve a satisfactory score on tests structured to determine the ability to perform essential job functions.
Must meet the physical requirements which qualify a person to perform essential job functions.
Must be able to multi-task and work under pressure.
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals.
Must have at least six months of acceptable mechanical experience or appropriate technical training.
Candidates who have graduated from high school with a vocational diploma or other diploma that includes a minimum of six (6) units of study (2-3 years) in a major vocational field will be considered.
The acceptable vocational fields are: automotive, metals and electrical/electronics.
To be considered based on high school vocational qualifications, candidates must provide copies of their high school transcripts listing courses, grades and credits.
Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems.
Must achieve a satisfactory score on tests structured to determine the ability to perform essential job functions.
Must meet the physical requirements which qualify a person to perform essential job functions. Must be familiar with the use of a VHF radio and be able to multi-task and work under pressure.
Must Haves:
Have a valid driver's license
Be able to DOT drug test
Be authorized to work in the US
Have the ability to work a flexible schedule including weekends and holidays
Successfully Complete full AMT testing ( 4 )  Mechanical Aptitude, Spatial Relations, Job Orientation, Troubleshooting
Successfully complete Delta Pre- Employment  Screening
Be at least 18 years of age
Be able to pass an extensive background check, drug test and audiogram
Must be performing satisfactorily in current position.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 42350
Job Location: Detroit, MI
Input Date: 08/05/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Nikita Khassanov
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Support Mechanics (REQ# 32811)

Description:
STS Technical Services is hiring Aircraft Support Mechanics in Minneapolis, Minnesota.

Job Summary:
Preferred Fulltime Employee contract Aircraft Support Mechanic (ASM) performs various tasks using appropriate equipment in the use of technical functions related to Aircraft Maintenance.
These tasks include, Airframe and Engine/Component Mtc .
This position may require other technical functions as developed.
This position requires a working knowledge, understanding and familiarity with approved manuals and procedures as associated with the job function.
Practices safety conscious behaviors in all operational processes and procedures.
Performs various tasks using appropriate equipment to assist mechanics in non-technical functions related to aircraft interior or cargo bin component changes such as those involving slide panels, carpeting, flooring, light bulb changes, seat operational checks, commissary/catering equipment and cargo container repairs.
May require other non-technical functions as developed.
Practices safety conscious behaviors in all operational processes and procedures.
Qualifications:
The PFE ASM position requires a high school diploma or equivalent.
An Airframe and Powerplant license and Avionics experience is preferred, but not required.
A minimum of one license is required along with the ability to secure the second license within 12 months of employment.
Candidate must be willing to work rotating or fixed shifts.
Additionally, candidate must be able to read and write English and comprehend and apply information contained in technical manuals.
Candidate must also be able to work and operate in a safe and compliant manner.
Must be able to work without close supervision.
Candidate should have strong organizational skills and be able to respond to changing or multiple work demands.
Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems.
Must achieve a satisfactory score on tests structured to determine the ability to perform essential job functions.
Must meet the physical requirements which qualify a person to perform essential job functions.
Must be able to multi-task and work under pressure.
Additional Requirements:
Have a valid driver's license
Be able to DOT drug test
Be authorized to work in the US
Have the ability to work a flexible schedule including weekends and holidays
Successfully Complete full AMT testing ( 4 )  Mechanical Aptitude, Spatial Relations, Job Orientation, Troubleshooting
Successfully complete Delta Pre-Employment  Screening
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 42349
Job Location: Minneapolis, MN
Input Date: 08/05/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Kristofer Cagle
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Support Mechanics (REQ# 32853)

Description:
STS Technical Services is hiring Aircraft Support Mechanics in Orlando, Florida.

Job Summary:

Preferred Fulltime Employee contract Aircraft Support Mechanic (ASM) performs various tasks using appropriate equipment in the use of technical functions related to Aircraft Maintenance. These tasks include, Airframe and Engine/Component Mtc . This position may require other technical functions as developed. This position requires a working knowledge, understanding and familiarity with approved manuals and procedures as associated with the job function. Practices safety conscious behaviors in all operational processes and procedures.

Performs various tasks using appropriate equipment to assist mechanics in non-technical functions related to aircraft interior or cargo bin component changes such as those involving slide panels, carpeting, flooring, light bulb changes, seat operational checks, commissary/catering equipment and cargo container repairs. May require other non-technical functions as developed. Practices safety conscious behaviors in all operational processes and procedures.

Qualifications:
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals.
Requires high school diploma or G.E.D.
Must have at least six months of acceptable mechanical experience or appropriate technical training.
Candidates who have graduated from high school with a vocational diploma or other diploma that includes a minimum of six (6) units of study (2-3 years) in a major vocational field will be considered.
The acceptable vocational fields are: automotive, metals and electrical/electronics.
To be considered based on high school vocational qualifications, candidates must provide copies of their high school transcripts listing courses, grades and credits.
Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems.
Must achieve a satisfactory score on tests structured to determine the ability to perform essential job functions.
Must meet the physical requirements which qualify a person to perform essential job functions.
Must be familiar with the use of a VHF radio and be able to multi-task and work under pressure.
An Airframe and Powerplant license and Avionics experience is preferred but not required.
A minimum of one license is required along with the ability to secure the second license within 12 months of employment.
Candidate must be willing to work rotating or fixed shifts.
Additionally, candidate must be able to read and write English and comprehend and apply information contained in technical manuals.
Candidate must also be able to work and operate in a safe and compliant manner.
Must be able to work without close supervision.
Candidate should have strong organizational skills and be able to respond to changing or multiple work demands.
Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems.
Must achieve a satisfactory score on tests structured to determine the ability to perform essential job functions.
Must meet the physical requirements which qualify a person to perform essential job functions.
Must Haves:
Have a valid driver's license
Be able to DOT drug test
Be authorized to work in the US
Have the ability to work a flexible schedule including weekends and holidays
Successfully Complete full AMT testing ( 4 )  Mechanical Aptitude, Spatial Relations, Job Orientation, Troubleshooting
Successfully complete Delta Pre- Employment  Screening
Be at least 18 years of age
Be able to pass an extensive background check, drug test and audiogram
Must be performing satisfactorily in current position.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 42366
Job Location: Orlando, FL
Input Date: 08/05/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Kristofer Cagle
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Mechanics (REQ# 32895)

Description:
STS Technical Services is hiring Airframe & Powerplant Technicians in Boston, Massachusetts.

Job Summary:
Inspect, test, repair, maintain, and service aircraft.
Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications.
Perform visual inspections during assembly of part and after repair or installation of component.
Perform operational checks after maintenance is performed to ensure proper operation.
Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks.
Disassemble and inspect parts for wear, warping, or other defects.
Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.
Test engine and system operations, using testing equipment.
Service and maintain aircraft systems.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned tasks.
Other duties may be assigned.
Requirements:
FAA Airframe and Powerplant license.
Must have 2+ years experience within commercial aviation.
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals.
Must be able to document maintenance performed on required forms.
Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models.
Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)
Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines.
Practice safety conscious behaviors in all operational processes and procedures.
High School Diploma or equivalent.
Successfully complete a fingerprint-based Criminal History Records check prior to beginning work.
Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds.
Must be willing to work rotating or fixed shifts.
A valid clear driver’s license.
As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 42338
Job Location: Boston, MA
Input Date: 08/05/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Jennifer Flintrop
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Airworthiness Engineer II

Description:

Unique Skills:

1) Strong background with Federal Aviation Certification Processes and upderstanding and application of 14 CFR part 21 and part 25 regulations for Engineering Type Design change projects.

2) Ability to review and understand engineering certification plans and provide guidance for compliance demonstration.

3) Experience working engineering design change projects (on the engineering side) is required.

4) Some understanding of EASA processes and CS 25 regulatory requirements is required (experience with other foreign authoriies is acceptable in lieu of EASA).

5) Previous experience working with a delegated organization (ODA, DAS, DOA) is preferred but not required.

6) Understanding of conformity is desired.

Education and Experience Requirements
Bachelor's Degree in a discipline relevant to the position required. 10 years specific certification experience or 15 years broad engineering experience. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.Position Purpose:

Guides and independently performs a variety of engineering and supportive tasks associated with the Compliance Assurance Organization, Organization Designation Authority, FAA, EASA and other foreign civil aviation authorities. Responsibilities include guiding, generating, processing, and supporting the review of engineering documentation required. for certification programs from project start to closure.
Job Description

Prepares, develops, and reviews complex certification plans describing the project scope, certification deliverables, means of compliance, and test/conformity requirements. Coordinates with EAR to resolve issues with certification deliverables and 8100-9 finding. Prepares TIA pre-requisites, draft TIA, and open projects/open PR memo. Hosts Pre-Flight Board Meeting with FAA. Independently prepares Summary Compliance Reports for more complex projects. Responsible for tracking project task assignments, status, and estimated complete dates as assigned. Develop and present briefings on certification strategy, status to program leadership, as assigned. Develops TC and STC FCAA validation deliverables including ROM development, application & classification, SSD & SEI effectivity, schedule development, meeting agendas, presentation coordination for generation with Subject Matter Experts and review, TC & STC internal coordination and action tracking, FCAA responses, ensure publication of minutes and actions, develops validation work plans, TC & STC internal coordination and action tracking, coordinates company responses for Issue papers / CRIs / CAIs, and the FAA responses, coordinate the review of draft VTC, VTCDS, final AFMS and coordinate responses for closure of the validation project.

Other Requirements:

Working knowledge of Phases of TC, post-TC and STC certification projects, and the associated FAA Orders and Policy; ODA Procedures Manual and key differences in process between different types of projects; Part 25 regulations, how those regulations drive design and system redundancy requirements, and the supporting regulatory guidance material; Certification testing process and deliverables; Airworthiness limitations and associated regulations and operating requirements; Differing certification bases across the production models; Determining design changes (major/minor) and what systems and regulations may be impacted by those design changes; and Validation procedures, project classification and significant standards differences for EASA, Brazil, Canada and China. In-depth knowledge of design and systems knowledge across multiple models, requirements and potential issues that would be applicable for new/novel technologies, and validation procedures, project classification and significant standards differences across a range of countries.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2715-2699-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 01/18/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Engineer - Programmer

Description:
Johnson Service Group is hiring an Automation Engineer - Programmer for our client in Huntington Beach, CA.

DUTIES AND RESPONSIBILITIES

Program control systems – SCADA, PLC, HMI, Historian, Communications hardware, etc.
Design, configure, and program HMI screens to support the overall control of the equipment and process, ensuring proper configuration is in place for PLC/HMI hardware to effectively communicate.
Setup and startup of hardware and software for the PLC, HMI, variable frequency drives, control, and communications networks.
Coordinate with management and automation team members regarding control system development, standards, and implementation.
Work with production and process development team to capture data and develop custom automation systems suited to department needs.
Participate in testing and commissioning of the control system.
Ensure QA/QC process is established and implemented as related to the control system – programming, implementation, and testing.
Load, test and document control system programs and communication systems.
Coordinate with sub-contractors and suppliers as related to control system supply, integration, implementation, and testing.
Conduct end-user training.
Work and communicate effectively with other disciplines, task leaders, and project managers.
Identify technologies to be used for future applications and extensions of current architectures.
QUALIFICATIONS

5+ years of industrial automation programming or related work experience.
Bachelor of Science degree in Electrical, Mechanical, Chemical or Computer Engineering or Associate Degree in Engineering or trade school program completion in relevant field.
Ability to understand chemical dosing and effectively automating the controls system to achieve a steady, consistent dosage.
Understanding of industrial environments, engineering, and production processes.
AutoCAD or other design software (Solidworks, Inventor, etc.) knowledge preferred.
Experience with any of the following PLCs: Allen Bradly, Modicon, Siemens, AutomationDirect, and Omron. Proven experience with any of the following HMI, or SCADA software packages AutomationDirect's C-More, Ignition SCADA by Inductive Automation, Wonderware, FactoryTalk View ME/SE, Vijeo Citect, Ci-Tech, etc.
Experience with motor controls: electrical or drive type, VFD, VSD.
 
Job Number: JE-392523
Job Location: Huntington Beach, CA
Rate: salary DOE
Duration: direct hire
Input Date: 08/31/2022
Last Updated: 09/12/2022
Firm Name: JOHNSON SERVICE GROUP
Attention: Jeana Edrozo
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Buyer

Description:
***MUST LIVE NEAR BETHLEHAM PA****
M-F 1st shift 8am 4:30pm

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Job Description

Responsible for planning, sourcing, and procurement of goods as required by a variety of procurement categories. The Buyer / Sr. Buyer will work closely with suppliers, customers, and all departments within PMC, to ensure the customer's requirements are met, and communicate any issues quickly and accurately. This is a full time exempt, salary position and reports directly to the Supply Chain Manager.

Responsibilities

    Maintain positive working relationships with customers, suppliers, and Atlas personnel from other organizations. Analyzes MRP requirements and issues Purchase Orders to suppliers based on system parameters. Develops Requests for Quotations and analyze supplier responses. Negotiates with suppliers to obtain cost savings, economical prices, quantities, delivery dates, and payment terms according to Atlas specifications, production schedules, material requirements, and company policies and procedures. Track delivery of open purchase orders and advise appropriate personnel if customer delivery is in danger of not being met. Attend required meetings with complete and accurate data Maintain ethical business practices in all aspects of position as an upstanding Atlas representative. Monitor any/all immediate buy needs to verify timely deliveries. Accomplish daily tasks accurately and in a timely manner (phone calls/email) Document all issues of concern and important information Understand and perform within the company's Policy Manual Maintain inventory levels and ensure levels/orders adhere to the ABC policy set forth. Ensure profitability on procured products. Develop recommendations to improve policies and procedures Minimize days/hours missed during standard business days (notify supervisor prior to any/all time away in advance when able to). Utilizes problem solving skills to provide solutions to problems that arise on a daily basis.

Additional Responsibilities

    All employees are responsible for the quality of their work and implementation of the Quality Policy. Ensure that document and digital data control is in compliance with AS9100 guidelines. Has authority to stop any production order for quality concerns. Performs other similar or related duties as necessary. Consistently provides professional business communication to internal & external customers and peers. Strives to consistently act in accordance with normal business professionalism principles during all company events, including meetings, off-site supplier visits, audits etc.

Job Qualifications

    High School Diploma or G.E.D., College degree preferred MRP/ERP experience highly desired Detail oriented with meticulous work habits Proficient in Microsoft Office Must have excellent interpersonal and communication skills Team Oriented

Work Environment

    Office and Industrial shop environment

Skills & Knowledge Requirements

    Atlas Employee Handbook Atlas AS9100 Quality System Atlas Safety Handbook Basic Blueprint reading Efficient in Microsoft Office; including Excel, Power-point & Word. Communication skills; phone, email Understands Supply Chain Principles

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3754-3736-11534
Job Location: Bensalem PA
Per Diem: --
Overtime: --
Start Date: 2022-05-12
Input Date: 05/08/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Buyer/Procurement Analyst

Description:
This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Job Description:
1. Purpose of Job:
The Buyer Specialist is a key aftermarket supply chain position with the responsibility to ensure critical support is provided for our Helicopter customers operating around the world. Activities revolve around processing repairs, supplier quotes, etc. using SAP Enterprise Resource Planning (ERP) system as the primary processing environment for the Trumbull Commercial Aftermarket MRO & Repairs.

2. Assigned Duties:
The Buyer Specialist's role will be responsible for the delivery, cost, and quality of their respective repair vendors.
    The analyst must take ownership for all vendors within their jurisdiction from a strategic and transactional vantagepoint. Maintain open repair orders and issue supplier performance reports as needed Negotiate pricing and contractual terms. Manage supplier relationships and performance issues. Expediting and coordinating material requirements to suppliers for repaired Trumbull components. Manage the return and speedy replacement of defective materials. Review and qualify new and existing suppliers as needed. Supplier surveys may include site visitation involving the auditing of supplier procedures used in the repair of products and services. Managing communication with customers related to pricing, contract flow down, civil airworthiness certification, quality and delivery. Monitor supplier portal to ensure suppliers are properly maintaining commit dates. Make recommendations to suppliers to enable them to better serve and conduct business in a co-operative and ethical manner in accordance with Company guidelines to achieve departmental and company business objectives as defined by management. Manage weekly metrics and goal. Work on-site at GXO North Haven, CT Facility a minimum of one day per week and work with GXO Team and Supply Chain Commercial Repair Buyers to resolve/clear and report/document NCI Items as assigned by Management. Other tasks as assigned by management.

3. Skills Required:
    Strong computer skills MS office (Excel, PowerPoint, Word, etc.) and SAP ERP System skills. Strong analytical skills, business judgment and adaptability skills. Communicate effectively with internal/external customers and management using written and or verbal methods as required. High level of data analysis and reporting experience

4. Experience Required:
    Demonstrated ability to proactively manage and organize multiple priorities in a fast paced environment. 3-5 years' experience in working with external vendors and setting performance standards of excellence. Previous experience with SAP ERP system a Plus but not a requirement Ability to influence and aggressively hold suppliers accountable to established performance metrics. Identifying Process improvements using LM Enterprise Excellence Continuous Process improvement principles & methods. Establish strong relationships with our supply base and Trumbull MRO Shop management. Focus on results and be proactive. Demonstrated ability to proactively manage and organize multiple priorities in a fast paced environment. Self-motivated and able to work on own initiative. Must be an excellent Team player. Able to adapt and work on a fast paced environment

This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.


Job Description:
    Plans and conducts audits and assessments of supplier''s systems, processes and products. Documents and reports audit and assessment results. Inspects or verifies products for compliance with requirements. Assists with assessments of supplier capability and capacity to perform current or potential future work. Provides supplier education and coaching on quality systems, regulatory compliance issues and company initiatives. Resolves routine issues and concerns

Required Qualifications:
    Understanding of Part Manufacturing Supplier quality knowledge, Supplier contract knowledge Supplier audit experience Supplier qualification experience

Preferred Qualifications:
    Sheet metal, composite, machining, aircraft assessment experience Aviation experience is a big plus Bachelors Degree Preferred

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4203-4180-11534
Job Location: Trumbull CT
Per Diem: --
Overtime: --
Start Date: 2022-09-12
Input Date: 08/02/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Joshua Garza
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Designer - Aerospace

Description:
Johnson Service Group is hiring an Electrical Engineer for our client in Bothell, WA.

Job Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Looking for an electrical engineer to design a circuit card for a laser system.
Ideal candidate would also have layout experience and could design and layout a full circuit card and assist in the fabrication process if necessary.
Experience with Circuit Design is Required.
Experience with OrCAD or Zuken schematic tools is Highly Desired.
Experience with Graphic layout and design is Highly Desired.
BA Degree is Required.
 
Job Number: JE-392491
Job Location: Bothell, WA
Rate: 55-65/hr
Duration: 4 months + extension
Input Date: 08/31/2022
Last Updated: 09/09/2022
Firm Name: JOHNSON SERVICE GROUP
Attention: Jeana Edrozo
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil/Structural Engineer

Description:
Job Responsibilities

• Originate and check complex structural engineering deliverables, such as steel and concrete calculations, specifications, material requisitions.

• Reviews and coordinates technical documents with/from other engineering disciplines, procurement, and construction.

• Prepare technical reports related to specific design issues.

• Manage specifically assigned project activities.

• Assist in constructability reviews.

• Support construction by dispositioning field change requests and nonconformance reports.

• Act as a mentor or coach for subordinate engineers and designers.

• Schedule and coordinate off-project review requirements for engineering deliverables.

• Lead and/or participate in technical discussions with client, suppliers, construction, etc.

Qualifications

• BS degree in structural/civil engineering from an accredited university or college, and six years progressive related experience.

• PE in Civil or related Engineering Registration.

• Ability to independently execute the detailed design of complex steel and/or concrete structures.

• Thorough knowledge and application of the AISC Steel Construction Manual, ACI 318, and ASCE 7.

• Proficient in the use of structural analysis software such as GTSTRUDL or SAP 2000.

• Experience with GADD applications, such as AutoCAD.

• Experience in the use of Microsoft Excel, Word, Outlook, Access and PowerPoint.

• Thorough knowledge of engineering deliverables, such as drawings, specifications, and material requisitions and of construction methods for concrete and steel structures.

• Understands work processes of other disciplines and departments on projects.

• Ability to express technical issues in a clear and concise manner, both written and verbally.

• Ability to resolve design issues with subordinates, suppliers, other engineering disciplines, construction, and the client.

• Experience in civil structural design in industrial, nuclear, nuclear waste and/or defense facilities.

• Proficient in the use of Mathcad or similar software.

• Thorough knowledge of the provisions of ACI 349, AISC N690, ASCE 4-98, ASCE 7, and IBC codes.

• Experience with managing discipline software life cycle documentation.

• Necessary skills to present technical subjects with competence and confidence.

• Experience in resolving field problems associated with FCNs, FCRs, NCRs, CDRs, and/or SDDRs.
 
Job Number: 22888
Job Location: Cape Canaveral, FL
Rate: Open
Per Diem: $141/day
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/30/2022
Firm Name: MORSON INTERNATIONAL INC
Attention: Karen Roe
Address: 4950 YONGE ST, 2110
City, State: NORTH YORK, ON M2N 6K1
Country: CANADA
Phone: 416/477-7138
Website: www.morsoncanada.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Construction Technician

Description:
W2 contract to perm (for the right candidate)
China Lake/ Ridgecrest CA- Locals preferred but some relocation assistance might be available (but no Per Diem -other than Per Diem split, if qualified).
• A minimum of 6 years of verified experience as a Quality Control Manager or Superintendent working for general contractors on NAVFAC or Army Corps of Engineers (ACOE) or other Federal projects.
OR
• 10 years of verified foreman experience in one or more of following trades: Concrete; Mechanical, Electrical, Masonry, or Carpentry on commercial/industrial/military projects. OR
• 5 years as an Engineering Technician with either NAVFAC or the ACOE.
26303
SCA H&W Pay Rate: $4.22/hr (paid for the first 40 hours worked each week)
 
Job Number: MS26303
Job Location: China Lake, CA
Rate: $38-$45
Per Diem: Split
Overtime: yes
Duration: 3-6 months to perm (possibly)
Start Date: ASAP
Input Date: 07/27/2022
Firm Name: NESC STAFFING
Attention: Amanda Spencer
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Data and Controls Test Engineer

Description:
PDS Tech is currently seeking a Data and Controls Test Engineer for our client in Santa Cruz, CA
Overview
We are seeking a motivated individual to join our Testing team to develop the data acquisition, controls and hardware/software interface tools needed to perform and automate structural, environmental, and functional tests of flight-critical components and subsystems for VTOL electric aircraft. The data collected during these tests will inform the company’s hardware design efforts and pave the way to production-ready hardware. The team is made up of extremely talented, hardworking, proactive, and hands-on individuals, operating in a very fast-paced and rewarding environment. We are looking to expand this team with like-minded individuals looking to make a mark in the transportation industry.

Responsibilities

  • Work in a small team to develop a test software ecosystem that allows for automation of new and existing testing platforms, using NI LabView and a variety of industry and proprietary platforms. 
  • Develop instrumentation and controls hardware, test fixture GUI, LabView VIs and any other necessary tools to enable test execution and automation. 
  • Specify, review, and incorporate new types of data acquisition instruments into the data pipeline. 
  • Analyze data collected during the tests to generate reports to provide quantifiable feedback to the engineering teams that will allow them to optimize their designs. 
  • Help to guide the architecture of testing software to help smooth the transition from R&D testing into manufacturing acceptance testing. 

Required
  • B.S. in Electrical or Computer Science Engineering or relevant discipline  
  • 5+ years of relevant work experience 
  • Experience with data acquisition hardware such as ammeters, foil strain gauges, accelerometers, load cells, thermistors, transducers, etc. (including sensor installation) 
  • Fluent in using LabVIEW for data collection, automation, and control 
  • Experience using LabView for data collection and Diadem/MATLAB for data processing 
  • Experience using scripting languages to build and integrate complex software systems 
  • Excellent problem solving and communication skills  
  • Hands-on attitude with strong analytical background  
  • Pursuant to various local, state, and federal regulations, you must show proof of your full COVID-19 vaccination status prior to your start date.  Exemption requests are available for bona fide religious and medical circumstances.

Desired

  • M.S./Ph.D. in relevant discipline  
  • Experience with industrial test laboratory environments and procedures 
  • Experience with NI TestStand & Knowledge of NI Hardware 
  • Hands-on machine shop skills using lathe, mill, welder, and other machine shop equipment 
  • Experience with high voltage electronics. 
  • Experience testing aircraft composite structures. 
  • Experience testing aircraft mechanical systems. 
  • Aerospace and rapid prototyping experience 
  • Experience working with LabVIEW Real Time for control and data acquisition

     
Job Number: 2210150907
Job Location: Santa Cruz, CA
Duration: 6 months
Input Date: 05/07/2022
Last Updated: 09/28/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: denglert@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jpNbQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Tooling and Fixtures - Medical Device Products - Remote possible

Description:
Design Engineer - Tooling and Fixtures - Medical Device Products - Remote possible - CA - 1903

Our client in the California area is involved in the design and manufacture of Medical Device products for Neurovascular applications. They are currently seeking an experienced Design Engineer for tooling and fixtures for their operations.

Perform a hands-on engineering and liaison role between our design team, manufacturing engineering, internal manufacturing and external suppliers.

Develop and improve processes related to Tool Engineering design/build and specification buy for Parts and Sub-assembly Production.
Lead capability assessments, and troubleshooting investigations related to Production Tooling and Ground Support Equipment.
Lead projects to reduce cycle time, flow time and improve outcomes.
Take a significant leadership role in both designing and specification purchases of large, complex tool and equipment packages.
Maintain and report on activity schedule, budget, and technical status.
Drive to root cause, corrective action, and preventive action.
Mentor and educate on tooling and Ground Support Equipment design and fabrication.
Author and maintain tool engineering standards and specifications.
This position will be located in Kent, WA with the frequent travel to our Orbital Launch Site in Cape Canaveral, FL.

Qualifications
B.S. degree in mechanical engineering, medical engineering, civil engineering or other engineering discipline.
12+ years of demonstrated resourcefulness and execution within complex, rapidly-changing manufacturing environments.
Experience with tool and/or equipment engineering in the medical aera.
Desire to work hands-on leading a team, throughout the development, production and launch operation phases of the product lifecycle.
Strong Project Management skills consistent with leading a team including suppliers through the complex Development, Production and Operations phases.
Schedule and Budget Management Experience
Excellent attention to detail and strong task ownership, someone who demonstrates pride in all work and willingness to perform low-level tasks when needed.
Strong written and oral communication skills.
Strong CAD Skills with experience using PROe/CREO, NX or CATIA.
Strong GD&T skills.
Strong analysis skills.
Experience with requirements development for tooling and Ground Support Equipment.
Experience in generating tooling and equipment specifications.
Experience in generating tooling and Ground Support Equipment Statements of Work.
Experience in both development and production environments.
Must be willing to travel up to 20% of the time.
Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

Desired
Experience with medical product manufacturing.
PMP certification.
Experience and knowledge of medical materials.
Passion for advancing the commercial medical industry.
M.S. degree in mechanical engineering, medical engineering, civil engineering or other engineering discipline.
Experience in small company, startup, or growth transition environments.
Kaizen, Six Sigma, or related training.
Prior management experience in tool or equipment engineering at a medical company or supplier.

If interested, please send your updated resume in Word doc format to Katie at cad2@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
 
Job Number: KD1903
Job Location: CA, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/05/2022
Firm Name: KELTIA DESIGN INC
Attention: Kevin Burtchaell
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

ECS Electrical Engineer

Description:
An ECS Electrical Engineer job in Palo Alto, CA is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for designing ECS (and related subsystems) for performance and producibility. To be considered for this role, you will have a B.S. Degree in Electrical Engineering along with 10+ years of relevant experience and experience with 14 CFR Part 23 or 25 Certification programs.

Industrial Engineer Job Responsibilities:
* Capture and validate electrical related requirements
* Define electrical hardware logic control, as applicable
* Create electrical schematics/sizing to feed EWIS team
* Review/approve electrical diagrams/installation documentation/activities
* Analyze electrical functionality of Safety documents
* Evaluate ECS components electrical characteristics
* Coordinate components simulation (as an input to Flight Science team)
* Evaluate system performance under normal/abnormal electrical transients
* Define electrical interfaces: Create and maintain eICD
* Define Flight Test instrumentation electrical interfaces
* Prepare and maintain 'Electrical Load characteristics document' to feed LVPS
* Establish voltage drop levels for optimized wiring weight and system performance
* Review DO160 Electrical sections equipment qualification
* Qualification (electrical) documents review/approval

ECS Electrical Engineer Job Requirements:
* Bachelor's Degree in Electrical Engineering or a related field
* Experience with 14 CFR Part 23 or 25 Certification programs
* 10 years of relevant experience
* Knowledge and experience in ECS systems (ATA 25)
* Experience with the following tasks is an asset: Development assurance process (V&V and ARP-4754), Safety process (ARP4761), Equipment qualification (DO160)
* Experience with Requirements Management Tools such as DOORs, Jama or Polarion
* Experience with Model Based Systems Engineering

If you are interested in this ECS Electrical Engineer job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 324478
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/18/2022
Last Updated: 09/28/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=324478&job_number=324478

EHS Manager

Description:

If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver, and can make things happen - apply today!

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION FOR EHS MANAGER:-DIRECT HIRE

What we are looking for:

EHS Manager will need to focus his/her time developing programs and addressing noncompliance issues outlined in the Road Map

- Manages the environmental, health, and safety management system ensuring employee safety and well-being, reducing company risk/liability and focusing on overall stewardship for company and community EHS priorities
- Evaluates operations, equipment (new and existing) and practices for environmental health and safety compliance with regulatory and ABL standards
- Administer and maintain Safety compliance programs such as LOTO, Hazard Communication, EAP, Hearing Conservation, PPE, Hot Work, Confined Spaces, Respiratory Protection, BBP, etc.
- Complete regulatory required inspections, audits, and reporting
- Monitor the site to ensure it is operating in compliance with OSHA, EPA, and DOT regulations
- Establishes and implements environmental, health, safety and industrial / occupational hygiene compliance programs.
- Prepare and submit reports to federal and state and local regulatory agencies as required
- Create, update, and coordinate emergency response plans (HMBP) with state and local emergency planning committees
- Provide EHS functional leadership and partner with manufacturing/engineering/test teams and others as needed, to ensure environmental and regulatory compliance
- Serve as the principal Emergency Coordinator and respond to on-site emergencies involving people, products or waste
- Direct responsibility for completing and submitting all required regulatory reporting for air emissions, toxic chemicals, waste disposal, storm water discharges and hazardous materials reporting
- Manage and maintain compliance programs and reporting for air (NESHAP, AER), waste (RCRA, HWR), water permits and authorizations (NPDES, SWPPP), SPCC, TRI and Tier II reporting, and lead sustainability initiatives
- Lead execution of a strong CAPA (Corrective Action / Preventive Action) and Root Cause Analysis program that drives site improvement in Safety and Environmental Health
- Manages EHS Training by developing, administering and/or facilitating necessary training modules to ensure that training personnel and employees understand and can execute established procedures while meeting all EPA, OSHA and DOT requirements
- Manage and track KPIs with leading indicators of performance; partner with the site to establish goals and improvement targets and drive initiatives to achieve those goals
- Coordinate with stakeholders, functional or operation leaders as necessary over the course of the project
- Develop and maintain policies and documentation at the site level related to corporate EHS program

What you bring:

- This individual will have strong collaboration skills and the ability to partner with all functional areas
- BS degree required in Occupational Health & Safety; Chemical, Mechanical, Environmental, or Safety Engineering or Science related field or equivalent experience
- 7+ years of experience in Environmental, Health & Safety management including Industrial Hygiene
- 5+ years of experience in a manufacturing work environment; preferably aerospace
- Extensive knowledge of occupational safety regulations and policies
- Knowledge of EHS software systems.
- Proficient in Microsoft Office Suite, with intermediate to advanced Excel skills
- Excellent written and verbal communication skills; ability to communicate technical requirements and data to others that do not have the same expertise or experience
- Excellent listening skills and ability to understand and interpret business needs to define communication requirements for a variety of audiences
- Strong initiative and self-starter; ability to prioritize and multiple tasks and deadlines
- Strong analytical skills, excellent troubleshooting skills and ability to conduct root cause analysis
Must have the ability to lead and manage project teams; set clear goals and objectives and drive performance results

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2819-2803-11534
Job Location: El Segundo CA
Per Diem: --
Overtime: --
Start Date: 2022-04-14
Input Date: 01/29/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Elle King
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

EHS Manager

Description:

If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver, and can make things happen - apply today!

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION FOR EHS MANAGER:-DIRECT HIRE

What we are looking for:

EHS Manager will need to focus his/her time developing programs and addressing noncompliance issues outlined in the Road Map

- Manages the environmental, health, and safety management system ensuring employee safety and well-being, reducing company risk/liability and focusing on overall stewardship for company and community EHS priorities
- Evaluates operations, equipment (new and existing) and practices for environmental health and safety compliance with regulatory and ABL standards
- Administer and maintain Safety compliance programs such as LOTO, Hazard Communication, EAP, Hearing Conservation, PPE, Hot Work, Confined Spaces, Respiratory Protection, BBP, etc.
- Complete regulatory required inspections, audits, and reporting
- Monitor the site to ensure it is operating in compliance with OSHA, EPA, and DOT regulations
- Establishes and implements environmental, health, safety and industrial / occupational hygiene compliance programs.
- Prepare and submit reports to federal and state and local regulatory agencies as required
- Create, update, and coordinate emergency response plans (HMBP) with state and local emergency planning committees
- Provide EHS functional leadership and partner with manufacturing/engineering/test teams and others as needed, to ensure environmental and regulatory compliance
- Serve as the principal Emergency Coordinator and respond to on-site emergencies involving people, products or waste
- Direct responsibility for completing and submitting all required regulatory reporting for air emissions, toxic chemicals, waste disposal, storm water discharges and hazardous materials reporting
- Manage and maintain compliance programs and reporting for air (NESHAP, AER), waste (RCRA, HWR), water permits and authorizations (NPDES, SWPPP), SPCC, TRI and Tier II reporting, and lead sustainability initiatives
- Lead execution of a strong CAPA (Corrective Action / Preventive Action) and Root Cause Analysis program that drives site improvement in Safety and Environmental Health
- Manages EHS Training by developing, administering and/or facilitating necessary training modules to ensure that training personnel and employees understand and can execute established procedures while meeting all EPA, OSHA and DOT requirements
- Manage and track KPIs with leading indicators of performance; partner with the site to establish goals and improvement targets and drive initiatives to achieve those goals
- Coordinate with stakeholders, functional or operation leaders as necessary over the course of the project
- Develop and maintain policies and documentation at the site level related to corporate EHS program

What you bring:

- This individual will have strong collaboration skills and the ability to partner with all functional areas
- BS degree required in Occupational Health & Safety; Chemical, Mechanical, Environmental, or Safety Engineering or Science related field or equivalent experience
- 7+ years of experience in Environmental, Health & Safety management including Industrial Hygiene
- 5+ years of experience in a manufacturing work environment; preferably aerospace
- Extensive knowledge of occupational safety regulations and policies
- Knowledge of EHS software systems.
- Proficient in Microsoft Office Suite, with intermediate to advanced Excel skills
- Excellent written and verbal communication skills; ability to communicate technical requirements and data to others that do not have the same expertise or experience
- Excellent listening skills and ability to understand and interpret business needs to define communication requirements for a variety of audiences
- Strong initiative and self-starter; ability to prioritize and multiple tasks and deadlines
- Strong analytical skills, excellent troubleshooting skills and ability to conduct root cause analysis
Must have the ability to lead and manage project teams; set clear goals and objectives and drive performance results

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2818-2802-11534
Job Location: Long Beach CA
Per Diem: --
Overtime: --
Start Date: 2022-04-14
Input Date: 01/29/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Elle King
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Electrical Design Engineer 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Our engineers share a passion to redefine what's possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you!
Join Production Engineering in building our next generation of amazing products. Each day, you'll work alongside experts in production, quality, design, and supply chain roles to guide aircraft from design to delivery and beyond. Bring your ideas and help shape the future of aerospace manufacturing.

Commercial Airplanes is seeking a CONTRACTOR Mid-Level Equipment & Tool Engineers to support 777, 777X, and Fabrication programs within the Puget Sound region. A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out in the factory, interacting with mechanics, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.
In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
Work Location/Building: EVERETT, WA / AUBURN, WA / PUYALLUP, WA
HOW WILL LOCATION PLACEMENT BE DETERMINED? Will depend on business need

- SUPPLIERS: note the candidates location preference on the top of their resume.
Remote, onsite or a combination of both? Combination onsite and remote (3+ days on site)

Are you okay with out-of-state candidates?: YES must relocate at their own expense

Does this position have any physical requirements/limitations? - Required to be on the shop floor be able to walk around and climb stairs.

Primary Responsibilities:
-Electrical Controls: Program, integrate, and/or troubleshoot equipment, including but not limited to:Programmable Logic Controllers (Numerical Controls (Human Machine Interfaces
-Work in a cross-functional team alongside specialists from manufacturing, quality, safety, post-production services, product development, suppliers, and vendors
-Equipment and Data Acquisition for reliability
-Cisco Router validation and integration of MOXA router
Additional Skills:
Basic Qualifications (Required Skills/ Experience):
Minimum 3 years of experience working in an engineering discipline
3 or more years of experience with production systems in a manufacturing or engineering capacity
PLC, CNC, HMI, or robot programming, commissioning, and maintaining experience in automation industry

Preferred Qualifications (Desired Skills/Experience):
2 or more years of experience working to industry standards including compliance with electrical and safety codes
2+ years of experience working with hardware and/or software configuration management
2+ years working with network integration of industrial equipment
Equipment Procurement
Project Management Experience
Technical Writing
Requirements Gathering
Experience using basic Microsoft Office and office computing systems
Ability to learn in a fast paced environment
Ability to collaborate with both the engineering work force and the mechanics on the factory floor

Education requirements please make sure all submitted candidates have a Bachelor of Science degree or higher in engineering, computer science, mathematics, physics or chemistry. If they do not meet this requirement, please withdraw them from consideration ASAP
Typical education/experience:
Degree and typical experience in engineering classification:
o Bachelor's and 7 or more years' experience
o Master's with 5 or more years' experience
o PhD with 3 or more years' experience
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?:
Airplane Configuration
Analyze & Interpret Engr Data
Assembly Process
Calibration Measurement
Computer Aided Design Tools
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
-Work with Network Integration on equipment; includes root cause corrective action, regression testing, development of key performance indicator dashboards, and work with asset tag - feedback/ data collection

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3127-3111-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-06-07
Input Date: 03/02/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Job Description:
• Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
• Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
• Looking for an electrical engineer to design a circuit card for a laser system.
• Ideal candidate would also have layout experience and could design and layout a full circuit card and assist in the fabrication process if necessary.
• Experience with Circuit Design is Required.
• Experience with OrCAD or Zuken schematic tools is Highly Desired.
• Experience with Graphic layout and design is Highly Desired.
• BA Degree is Required.

Notes:
• Looking for an electrical engineer to design a circuit card for a laser system.
• Ideal candidate would also have layout experience and could design and layout a full circuit card and assist in the fabrication process if necessary.
• Experience with Circuit Design is Required.
• Experience with OrCAD or Zuken schematic tools is Highly Desired.
• Experience with Graphic layout and design is Highly Desired.
• BA Degree is Required.

Education:
• BS+16 YRS or MS+14 YRS.
 
Job Number: 1
Job Location: Bothell, WA
Rate: NA
Per Diem: NA
Overtime: NA
Duration: 06 Months
Start Date: 2 week
Input Date: 08/03/2022
Firm Name: PACER STAFFING
Attention: Amit Sharma
Address: 1445 CITY AVE STE 10B
City, State: WYNNEWOOD, PA 19096
Phone: 215/666-0012
Website: pacerstaffing.com

Electrical Engineer

Description:
This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks for commercial, industrial, and domestic purposes.

Job Description:
Research, development, design, and test of electrical components, equipment, systems, and networks for underwater vehicles and systems. This job will involve taking an individual from the initial concepts and architecture of a submersible system to the final test and delivery of the product. The focused products we develop are submersible vehicles ranging from remotely operated (ROVs) to autonomously controlled (AUVs) to manned submersibles. Our engineers are exposed to many design, development, and testing aspects of various undersea vehicles and systems. The engineer will be responsible for supporting the design, production, and test through the life cycle. The position requires research, design, development, and testing of complex electrical designs including electrical analysis, hands-on testing and troubleshooting, and formal documentation of the electrical design. Many programs that will be worked on require broad electrical support, including issue resolution to distributed I/O architectures, RF systems, remote test station equipment, power distribution systems, and fiber optic interconnects. Work across disciplines during integration and test activities is required. Flexibility to support scheduled and unscheduled weekend and off-shift hour as well as travel for field support as needed.
Worker will Telework < 50%
No clearance required to start but candidate must be able to obtain a clearance in the event that they are converted to full time. Do not submit anybody who would be unable to obtain a clearance.
Additional Skills:
Skills:
Category
Name
Required
Importance
Experience
Areas of Expertise Circuit Design Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting Yes 1 4 - 6 Years
Areas of Expertise Vehicle Architecture No 4 1 - 2 Years
Technical Skills Electronic Testing Yes 1 4 - 6 Years
Technical Skills Electronics Yes 1 4 - 6 Years

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4157-4135-11534
Job Location: Riviera Beach FL
Per Diem: --
Overtime: --
Start Date: 2022-09-07
Input Date: 07/14/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Electrical Engineer

Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks for commercial, industrial, and domestic purposes.

Job Description:
Research, development, design, and test of electrical components, equipment, systems, and networks for underwater vehicles and systems. This job will involve taking an individual from the initial concepts and architecture of a submersible system to the final test and delivery of the product. The focused products we develop are submersible vehicles ranging from remotely operated (ROVs) to autonomously controlled (AUVs) to manned submersibles. Our engineers are exposed to many design, development, and testing aspects of various undersea vehicles and systems. The engineer will be responsible for supporting the design, production, and test through the life cycle. The position requires research, design, development, and testing of complex electrical designs including electrical analysis, hands-on testing and troubleshooting, and formal documentation of the electrical design. Many programs that will be worked on require broad electrical support, including issue resolution to distributed I/O architectures, RF systems, remote test station equipment, power distribution systems, and fiber optic interconnects. Work across disciplines during integration and test activities is required. Flexibility to support scheduled and unscheduled weekend and off-shift hour as well as travel for field support as needed.
Additional Sills:
Skills:
Category
Name
Required
Importance
Experience
Areas of Expertise Circuit Design Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting Yes 1 4 - 6 Years
Areas of Expertise Vehicle Architecture No 4 1 - 2 Years
Technical Skills Electronic Testing Yes 1 4 - 6 Years
Technical Skills Electronics Yes 1 4 - 6 Years

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3071-3055-11534
Job Location: Riviera Beach FL
Per Diem: --
Overtime: --
Start Date: 2022-06-02
Input Date: 02/24/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Andrew Lowden
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Electrical Maintenance Manager

Description:
Job Title: Electrical Maintenance Manager
Location: Mesa, AZ
Zip Code: 85212
Area Code: 480, 602, 623
Start Date: Right Away
Keywords: #steelmill #electrialmaintenance #nowhiring

An Electrical Maintenance Manager job is available with a client in Mesa, AZ. In this role you will be responsible for managing multiple project designs, scopes, budgets, and installations. You will also be responsible for driving continuous improvement, employee productivity, uptime improvements, and lead time reductions. To be considered for this role, you will have an Associate's Degree in a related technical discipline and a minimum of 5 years of operational leadership experience.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

* Work with the stakeholders from the start of each project to ensure you understand the project scope and vision.
* Anticipates maintenance expenditures and provides estimates to forecast and meet budgetary requirements.
* Prepare accurate cost estimates, resulting in projects that operate on the budget established in the estimate.
* Drive continuous improvement; employee productivity, uptime improvements, lead time reductions.
* Facilitate the compensation planning, performance assessment and employee development planning processes.

KNOWLEDGE / SKILL / ABILITY / EDUCATION / EXPERIENCE:
* 2-year degree in related technical discipline required.
* Minimum 5 years industrial maintenance experience.
* Minimum 5 years successful operational leadership experience.
* Strong scheduling, planning, organizing, problem solving, time managing, and prioritizing work skills.
* Capable of managing multiple project designs, scopes, budgets, and installations.
* Experience managing people and budgets.
* Mentor and train team members on proper equipment use.


If you are interested in this Electrical Maintenance Manager job in Mesa, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 327237
Job Location: Mesa, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2022
Last Updated: 09/28/2022
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
City, State: West Region
Email: dvanschaick@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=327237&job_number=327237

Electrical Robotics Design Engineer

Description:

JOB TITLE: Electrical Robotics Design Engineer

LOCATION: Everett, WA

Very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

Our engineers share a passion to redefine what's possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! Each day, you'll work alongside experts in production, quality, design, and supply chain roles to guide aircraft from design to delivery and beyond. Bring your ideas and help shape the future of aerospace manufacturing. Commercial Airplanes is seeking Mid-Level Equipment & Tool Engineers to support 777 and 777X within the Puget Sound region. A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out in the factory, interacting with mechanics, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.


Primary Responsibilities:
    Electrical Controls: Program, integrate, and/or troubleshoot equipment, including but not limited to:Programmable Logic Controllers (Numerical Controls (Human Machine Interfaces Work in a cross-functional team alongside specialists from manufacturing, quality, safety, post-production services, product development, suppliers, and vendors Equipment and Data Acquisition for reliability Work with Network Integration on equipment; includes root cause corrective action, regression testing, development of key performance indicator dashboards, and work with asset tag feedback/ data collection Cisco Router validation and integration of MOXA router

Desired Skills:

    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Degree and typical experience in engineering classification: Bachelor's and 7 or more years' experience Master's with 5 or more years' experience PhD with 3 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Basic Qualifications (Required Skills/ Experience):

    Minimum 3 years of experience working in an engineering discipline 3 or more years of experience with production systems in a manufacturing or engineering capacity PLC, CNC, HMI, or robot programming, commissioning, and maintaining experience in automation industry
Preferred Qualifications (Desired Skills/Experience):
    2 or more years of experience working to industry standards including compliance with electrical and safety codes 2+ years of experience working with hardware and/or software configuration management 2+ years working with network integration of industrial equipment Equipment Procurement Project Management Experience Technical Writing Requirements Gathering Experience using basic Microsoft Office and office computing systems Ability to learn in a fast paced environment Ability to collaborate with both the engineering work force and the mechanics on the factory floor
Geographical Location Preference:

Of the following locations, please indicate those in which you are NOT willing or able to work:
USA - Puyallup, WA
USA Auburn, WA
USA Renton, WA
USA Everett, WA

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4285-4262-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-09-01
Input Date: 07/14/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Joshua Garza
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Electrical Robotics Design Engineer

Description:

JOB TITLE: Electrical Robotics Design Engineer

LOCATION: Everett, WA

Very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

    Our engineers share a passion to redefine what's possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! Join our Production Engineering in building our next generation of amazing products. Each day, you'll work alongside experts in production, quality, design, and supply chain roles to guide aircraft from design to delivery and beyond. Bring your ideas to Boeing and help shape the future of aerospace manufacturing. We are seeking Mid-Level Equipment & Tool Engineers to support 777 and 777X programs. A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out in the factory, interacting with mechanics, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity. Role fully onsite 5 days a week

Primary Responsibilities:

    Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Manage projects to completion, effectively coordinating across all involved groups, to maintain configuration (hardware and/or software) and to ensure compliance with industry safety standards. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Performs studies and make recommendation for disposition of assets. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. In Electrical Controls roles: Program, integrate, and/or troubleshoot complex production equipment, including but not limited to: industrial robots, Programmable Logic Controllers (PLC), Numerical Controls (NC), Human Machine Interfaces (HMI), and/or automatic drives. Work in a cross-functional team alongside specialists from manufacturing, quality, safety, post-production services, product development, suppliers, and vendors. Contribute to the effectiveness of the organization by communicating, collaborating, teaching, and mentoring others. Conducts training for Production and Maintenance personnel. The position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Desired Skills:

    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

Typical education/experience:

    Degree and typical experience in engineering classification. Bachelor's and 7 or more years' experience Master's with 5 or more years' experience PhD with 3 or more years' experience. Bachelor's degree or higher in ABET accredited course of study in engineering or engineering technology.

Basic Qualifications (Required Skills/ Experience):

    Minimum 3 years of experience working in an engineering discipline. Minimum 3 years of experience with production systems in a manufacturing or engineering capacity.

Preferred Qualifications:

    5 or more years of experience working in an Equipment or Tool Engineering role. 5 or more years of experience working in a production environment. 3 or more years of CATIA or equivalent solid modeling experience. 2 or more years of experience with programming, integrating or troubleshooting industrial robots from OEMs such as ABB or FANUC, or PLCs, NCs, HMIs, or Drives such as Siemens, FANUC or Allen Bradley. 2 or more years of experience working to industry standards including compliance with electrical and safety codes. 2 or more years of experience working with hardware and/or software configuration management. Experience in Automation and robotics Experience working with Composites Ability to learn in a fast paced environment Ability to collaborate with both the engineering work force and the mechanics on the factory floor

Geographical Location Preference:

Of the following locations, please indicate those in which you are NOT willing or able to work:

USA - Puyallup, WA
USA Auburn, WA
USA Renton, WA
USA Everett, WA

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4284-4261-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-08-12
Input Date: 07/14/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Electrical/Instrumentation Design Engineer - Systems Test

Description:
PDS Tech is currently seeking an Electrical/Instrumentation Design Engineer - Systems Test for our client in Santa Cruz, CA
I am looking for an Electrical Engineer that is able to do detailed electrical design work, primarily ground based, for high voltage and low voltage systems.  Also, should have a strong understanding of systems engineering.

Overview
We are seeking a highly organized, passionate individual to join our system testing team. As part of this team, you will support the design and execution of structural, environmental, and functional tests of flight-critical components and subsystems for VTOL electric aircraft. You will also be directly involved in systems integration testing for the S4 aircraft. The data collected during these tests will inform the company’s hardware design efforts and pave the way to production-ready hardware. Our team is made up of extremely talented, hardworking, proactive, and hands-on individuals, operating in a very fast-paced and rewarding environment. We are looking to expand this team with like-minded individuals looking to make a mark in the transportation industry.

Responsibilities
  • Perform test and electrical/instrumentation equipment requirements definition, test equipment selection, test equipment detailed design for the S4 systems integration test lab
  • Be responsible for the electrical design and instrumentation design portions of our system test venues, from conceptual design to detailed engineering and drawings
  • Use proprietary or open-source tools or frameworks to design Hardware In the Loop (HIL) tests for software, electrical, mechanical, and energy components of the aircraft system
  • Create test setups for aircraft hardware by working closely with the mechanical, electrical, energy systems, and software teams, to capture the nuances of aircraft components, subsystem architectures, and operating conditions, and turn them into representative tests that will allow for validation of component and system designs
  • Develop formal test procedures, instrumentation guidelines, test fixture assembly/installation and any other necessary tools to allow for repeatable testing of specimens as discussed
  • Act as a test engineer on the environmental, integrated system and functional test rigs to validate design and system response against established benchmarks
  • Analyze data collected during the aforementioned tests to generate reports to provide quantifiable feedback to the engineering teams that will allow them to optimize their designs

Required
B.S. in Electrical Engineering, Electronics Engineering, Aerospace Engineering, or equivalent industry experience
Experience in developing electrical and instrumentation designs and schematics for test equipment
Experience with high-voltage electronics
Experience developing Hardware In the Loop tests
Experience with instrumentation techniques and sensors
Experience with data acquisition techniques
Strong analytical background
Excellent problem solving and communication skills
 
Desired
M.S./Ph.D. in relevant discipline
5+ years of work experience in relevant industry
Fluent in Python for test software creation
Experience with aircraft certification (DO-178B and DO-178C), regulatory requirements, compliance testing, aircraft software engineering processes, and test verification
Experience with industrial test laboratory environments and procedures
Experience with Altium schematic capture
Experience on aircraft systems integration test labs
Polarion requirements and test case documentation experienced a plus 
If interested, please reach out to discuss, thank you - DJ

     
Job Number: 2210151740
Job Location: Santa Cruz, CA
Duration: 6 months
Input Date: 04/25/2022
Last Updated: 09/28/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: denglert@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jtGjQAI&URLSource=cjhunter

Electrical-Mechanical Designer

Description:
A Designer job in Phoenix, AZ is currently available at Belcan. To be considered for this role, you will have an Associates degree in Computer Aided Design or related degree, and five to ten years of experience designing components using Creo, with previous Aerospace experience strongly preferred. In this role, you will perform design tasks to include electrical & mechanical design, drafting, and redline incorporations.

Designer Job duties:
*Create and revises complex Electrical & Mechanical design concepts, layouts, drawings by investigating and analyzing customer specific problems. Designs will include cable designs, electrical schematics, electrical interconnect drawings, electrical cable routings, electrical housing designs among other electrical/mechanical design needs.
* Assures that mechanical cable parts and assemblies will fit or interface properly within limits or allowable tolerances without interference.
* Maintains records, files, drawings, part lists, specifications, standards or other data essential to the completion of drawings as required.
* Create specifications and models for OEM customer off the shelf components for use in electrical and mechanical designs.
* Verifies own completed work checking mechanical layouts, making mathematical calculations as required using handbooks and catalogs in support of drafting calculations, materials used and quantities.

Qualifications:
*Requires Associates in Computer Aided Design, or similar degree with 2+ years of experience.
*Must have demonstrated communication and interpersonal skills ensuring positive customer relations.
*Must have demonstrated ability on AutoCAD platform to develop design concepts. Previous experience with Creo Parametric & Windchill PLM is desired.
*Knowledge of electrical design concepts with experience of integration between electrical and mechanical Designs.
*Beneficial to have knowledge of mechanical design concepts with Geometric Dimensioning and Tolerancing (GD&T).
*Beneficial to have demonstrated abilities with Creo Schematics.
*Beneficial to have demonstrated abilities with Creo surfacing.
*Beneficial to have prior leadership experience.
*Beneficial to have demonstrated abilities with Revit.

If you are interested in this Designer job in Phoenix, AZ, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 315659
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/25/2021
Last Updated: 09/28/2022
Firm Name: BELCAN TECHSERVICES
Attention: JosephKlont
City, State: Belcan - Recruiting
Email: jklont@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=315659&job_number=315659

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Designer - Eng. Contractor 3

Description:
Project Designer - Eng. Contractor 3

Location: Savannah, GA
Pay Rate: DOE
Job Type: Long Term Contract
Schedule: First Shift

Unique Skills:
-This role will support the Industrial Design/ Cabin innovation department as a 'Project Designer'
-Industrial Design or design related background preferred.
-Skills: 3D Modeling with Solidworks, Rendering, Model/ Making & mockups, Problem solving, Analytical thinking, Concept presentation, Time management, and detail oriented.
-Should be a self-starter that can work independently and within a team.
-Ability to develop requirements, draft schedules, and understand budgets.
-Knowledge of benchmarking and focus groups to understand current products and markets.
-Flexible to changes with ability to replan, re focus and re task to support the end goals.

Education and Experience Requirements
-Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Job Description
Principle Duties and Responsibilities:
Essential Functions:
-Contributes to planning, developing and coordinating of important engineering projects .
-Provides specialized technical assistance to team members .
-Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
-Determines and develops own approach to solutions within schedule and cost objectives .
-Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives .
-Acts as liaison with representatives outside of the assigned group/area .

Additional Functions:
-Actively works to improve daily processes and ensures all work meets customer requirements .
-Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
-Perform other duties as assigned.

Other Requirements:
-Advanced degree in engineering related field preferred
-The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18523
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/19/2022
Last Updated: 09/13/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineering Test Support

Description:
Job Title: Engineering Test Support
Salary: $87.00/hr
Status: Contract
Location: Scottsdale, AZ
Zip Code: 85257
Start Date: Right Away
Keywords: #engineeringjobs #defense #nowhiring
wst160

An Engineering Test Support job is available with a client in Scottsdale, AZ. In this role you will be responsible for participating in the planning of technical approaches, resources, schedules, budgets and equipment required for the testing and evaluating of new systems, products and special devices. You will prepare test and diagnostic programs, design test fixtures and equipment, and complete specifications and procedures throughout the engineering development lifecycle. To be considered for this role you will have a Bachelors Degree in Engineering or a related specialized area/field and 10 or more years of relevant job-related experience.

ENGINEERING TEST SUPPORT DUTIES AND RESPONSIBILITIES:

* Supports planning for, execution of, and documentation for system verification throughout the engineering development lifecycle, generating system test work products.
* Prepares and executes test cases and procedures for new products.
* Develops and conducts functional, operational, and/or performance tests on hardware, software, and systems.
* Assists with the design, development and implementation of cost-effective methods of testing and troubleshooting of hardware, software and systems for all phases of product development.
* Travel may be required.


KNOWLEDGE / SKILL / ABILITY / EDUCATION / EXPERIENCE:
* Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 10+ years of job-related experience, or a Master's degree with 8+ years of job-related experience.
* System processes and scripting languages such as JavaScript, Python, Perl is desired.
* Excellent knowledge of other related disciplines such as software, hardware, mechanical and systems engineering.
* Advanced skills with avionics installation tooling, wiring, wiring repair, wiring installation, soldering, and crimping techniques.
* Excellent use and understanding of test engineering concepts, principles, and theories.
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military.
* Team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments.


If you are interested in this Engineering Test Support job in Scottsdale, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 327429
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/05/2022
Last Updated: 09/28/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=327429&job_number=327429

Environmental Field Technician

Description:
PDS Tech is currently recruiting for a Environmental Field Technician to work in Carnegie, PA for a Direct position!

SUMMARY

A Project Scientist I (PS1) is an entry level position. This is a field-testing role that involves conducting air emissions testing for industrial clients. Using a teamwork approach with other members of the testing teams, a PS1 will support the basic aspects of testing projects including equipment preparation, deployment, staging/breakdown and sampling tasks assigned to them.

JOB DESCRIPTION:
  • Good verbal communication skills (Internally and with Clients and Regulators).
  • Mechanical and Electrical skills and knowledge of “how things work”.
  • Professional Appearance and Behavior.
  • Maintain Positive Attitude with ability to work well in groups.
  • Desire to Achieve Goals and grow into higher positions of leadership.
  • Ability to submit timesheets and expense reports on time
  • Safety and DOT Compliance
  • Successfully adheres to Health and Safety Program Manual
  • Follow all DOT requirements as trained to do so.
  • Proper use of Electronic Logging Device (ELD).
  • Demonstrates ability to work safely in office
  • Demonstrates ability to work safely in field
  • Conduct on-site field testing
  • Equipment and Mobile Lab Cleaning
  • Glassware Preparation
  • Assist in Equipment mobilizations and demobilizations
  • Follow current standards, codes and procedures regarding safe and effective use of equipment, maintenance programs and other policies as trained to do so.
  • Ensure the company is represented in a professional manner while at customer sites and in the office
  • Follow all test methods, procedures, and processes as trained to do so for quality source testing

Required Education and experience:
  • High School Diploma required. AS or BS degree preferred (Science and Engineering related fields ideal).
  • Computer skills  - Basic knowledge of Word, Excel, Adobe, Outlook.
  • Valid Driver’s License

Physical Demands

  • Must be able to meet certain physical demands such as:
  • Consistent standing or walking
  • Consistent bending, crouching or stooping
  • Frequent lifting of objects weighing up to 75 pounds
  • Climbing ladders and/or stairs
  • Use of tools or equipment requiring a high degree of dexterity
  • Ability to distinguish between shades of color
  • Ability to operate an Aerial Lift from the platform or deck
  • Ability and Willingness to work at elevated heights on stack platforms up to 300 feet
  • Must be willing to work outdoors in industrial environments.


Position Type/Expected Hours of Work
Full Time: Must be available to work plus 40 hours as well as some nights and weekends.

Travel
Must be able to travel (up to 95%) and maintain a valid driver’s license.



 

     
Job Number: 2210153593
Job Location: Carnegie, PA
Duration: 3 months
Input Date: 06/02/2022
Last Updated: 09/28/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: Leah Swan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: lswan@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003k3dNQAQ&URLSource=cjhunter

Environmental Health and Safety Specialist

Description:

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Your Mission
    Develops, implements, and evaluates safety policies, procedures, and programs to reduce work-related accidents, eliminate potentially hazardous conditions and control financial losses Responsible for assigned existing and on-going safety and environmental programs such as Hazard Communication, Hearing Conservation, Respiratory Protection, Hazardous Waste, Investigates causes of accidents and recommends changes in procedures, equipment usage, and/or work environment to correct problems and prevent recurrence Recommends and reviews results of corrective actions Participates in regular safety meetings with company employees to discuss potential environmental and/or safety problems, interpret procedures and discusses other safety-related issues Performs liaison function with outside agencies such as the EPA, Cal-OSHA, and County Agencies Operates, maintains and calibrates sophisticated environmental monitoring and sampling equipment Performs required industrial hygiene sampling Evaluates new equipment and processes Inspects equipment, tools and work aides for proper and safe operation and recommends removal from service for required repairs or modifications as necessary Research regulations, standards and codes, and coordinates compliance with federal, state and local environmental legislation Performs job site inspections to ensure safe working conditions, detect potential problems and rate potential problems according to factors such as probability and potential severity of injuries Develops and conducts employee training programs on safe work practices, first aid, fire procedures, and other environmental and safety related issues Conducts individual employee training as needed Maintains training records on Environmental, Health and Safety related matters Designs conventional and computerized record keeping systems May operate company vehicles Regular and reliable attendance and performance are required
What you bring
Knowledge of:
    Federal, state, county, local, OSHA, O.T and EPA requirements and industry standards Proper courses of action to prevent or reduce accidents Modern and innovative approaches to health and safety management Training techniques, training program development, development of procedures and manuals, and techniques of implementing and promoting programs in a multifaceted organization
Ability to and Skill in:
    Organize work, manages multiple priorities, and meet deadlines Identify needs and develop programs and work procedures to promote employee safety and occupational health Conduct investigations and prepare reports on safety-related issues Instruct and motivate employees in a positive effective manner Develop and maintain constructive professional working relationships with all encountered in the course of work Communicate effectively both orally and in writing with state and federal agencies, all levels of employees, and industry working groups Use advanced audio/visual equipment Proficiently use personal computer and applicable software (Microsoft Office, Excel, Access Database, and Power Point)
Minimum Qualifications Education and/or Experience: College level training and experience equivalent to:
    Bachelors' degree with major course work in occupational health and safety, industrial hygiene, environmental compliance, hazardous materials management, or closely related A Masters' degree in a position related field may be considered in lieu of one year experience. Position related experience may be considered on a case-by-case basis in lieu of degree Two years recent full-time position related experience in the field of occupational health and safety, including the planning and execution of safety program elements, accident investigation and equipment inspection
Required Licenses/Certifications:

Must possess and maintain a current, valid California driver's license and satisfactory driving record

CPR and First Aid Certified or ability/willingness to quickly get

Trainer for Lift Trucks/Scissor Lifts certified/able to be certified to train operators

Professional certifications achieved or in progress such as ASP/CSP/OHST etc. desirable but not required

Physical Requirement:

Use personal protective equipment such as gloves, hardhat, safety glasses or goggles, hearing protection, respirators and fall protection equipment. Able to walk, stoop, bend and subject to hot/dusty locations perform inspections. Climbing stairs or ladders and work on elevated heights, with appropriate protective equipment. Ability to lift 25 pounds occasionally.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3536-3518-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-05-10
Input Date: 04/21/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Megan giusti
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Equipment Engr 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Leads project teams to develop complex specifications, conceptual and final designs, cost estimates and provides maintenance support for the procurement or modification of equipment systems (e.g., ovens, autoclaves, furnaces, tank lines, etc.). Reviews specifications and/or designs to assess compliance with customer requirements, codes and applicable regulations by applying knowledge of process engineering, practices, and materials and takes appropriate corrective action. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, outside consultants and government agencies.Leads teams to perform complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability to specify configuration of new assets in order to support reliability programs. Performs and documents condition code analysis of complex equipment as part of a team. Reviews records, inspects, measures, and tests to document assets operating and maintainability condition for the purpose of determining whether to continue to operate, repair, surplus, or replace. Assists in the development of equipment condition coding processes and standards. Controls hardware, software and documentation configuration of complex equipment in accordance with company procedures and legal requirements to ensure a maintainable, repeatable process. Assists in the development configuration management policies and processes. Creates cost estimates for the acquisition and/or installation or modification of complex equipment to support customer budget and business planning activities for current and future year requirements. Assists in the development of cost estimating policies and processes. Creates, reviews and approves complex equipment designs through the application of engineering methodologies for the acquisition, creation, or modification of equipment. Designs will meet the stakeholders'' validated specifications, requirements, and/or functions, including adherence to applicable legal requirements. Incorporates maintainability and reliability principles into all designs. Ensures the integration of equipment with related infrastructure. Assists in the development of design standards and tools. Creates, reviews, revises, maintains, and organizes equipment documents and drawings for complex equipment in accordance with company procedures and legal requirements. Assists in the development of documentation standards. Develops, approves, and implements the testing and acceptance of complex equipment to validate that equipment performance meets the documented specifications. Documents results for historical record. Assists in the development of equipment testing and acceptance standards. Utilizes project management tools to plan, manage, and execute multiple major/complex projects by leading a team of stakeholders in the acquisition and modification of equipment to enable the customer to achieve the defined business objectives in accordance with company and accounting policies as applied to equipment. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information to Sr. management. Assists in the creation of contract scope, terms, and conditions. Ensures suppliers comply with all contract obligations. Develops and recommends equipment reliability improvements through the application of reliability engineering tools to ensure that equipment operational and maintenance processes are effective and efficient for operations customers. Improves existing equipment reliability. Ensures that new equipment designs address maintainability and reliability principles. Provides technical recommendations and solutions by investigating, evaluating, interfacing with suppliers and stakeholders, troubleshooting and responding to maintenance/operator questions related to complex equipment. Assists in the development of equipment reliability policies and processes. Develops, reviews and approves bid and procurement specifications for complex equipment by teaming with cross functional subject matter experts and applying engineering methodologies for the acquisition or modification of equipment which will meet the stakeholders'' requirements. Incorporates maintainability and reliability principles into all specifications. Assists in the development of equipment specification standards. Researches technologies, processes, materials, and methodologies related to complex equipment by attending educational events, reading technical publications, reviewing emerging trends, and studying historical data in order to identify opportunities for improvement in current and future projects. Mentors and shares learning with peers. Advises stakeholders on technology developments relevant to technical and business strategies. Identifies and assists in developing strategies and tactics to address market dynamics of our suppliers and their products. Trains and/or assists in the development and delivery of training of operators, maintenance personnel and others in order to transmit information necessary to correctly operate and maintain complex equipment. Delivers training for new or modified equipment, changes in process, changes in personnel, and/or as periodically required by company policy or legal requirement.

Leads project teams to develop complex specifications, conceptual and final designs, cost estimates and provides maintenance support for the procurement or modification of equipment systems (e.g. metal finishing tank lines (chemical process dip tanks, rinse tanks, spray tanks, dryers), industrial waste water plant, scrubbers, sparge air blowers, exhaust fans, pumps, heat exchangers, piping systems, chemical transfer lines, tank heating and cooling systems, rectifiers, etc.).
Trains and/or assists in the development and delivery of training of operators, maintenance personnel and others in order to transmit information necessary to correctly operate and maintain complex equipment. Delivers training for new or modified equipment, changes in process, changes in personnel, and/or as periodically required by company policy or legal requirement.
Role is onsite NO remote option. Will be onsite at Auburn WA site.
Travel may only include driving between two sites, around 20-25 miles each way. Auburn to Puyallup site.
Training will begin onsite. Successfully completing training is a contingency for this assignment.
Additional Skills:
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3642-3624-11534
Job Location: Auburn WA
Per Diem: --
Overtime: --
Start Date: 2022-09-12
Input Date: 04/21/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Communicates problems and issues to others for resolution. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies. Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Communicates problems and issues to others for resolution. Develops moderately complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Facilitates the implementation of moderately complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Communicates problems and issues to others for resolution. Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies. Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Ensures accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Manages or supports construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.Produces or procures detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents. Translates customer requirements into design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. With limited supervision, develops and updates design standards and site-specific operating procedures in order to establish common practices. Provides input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts. Translates customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements. Plans, manages, and executes projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Assists in the creation of contract scope. Ensures suppliers comply with all contract obligations.Interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.
Skills
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
Knowledge of facilities requirements analysis, facilities planning, facilities design standards and specifications, building codes, and facilities evaluation techniques and methodologies in support of product planning, deployment and on-going support.
Knowledge of relevant government laws and regulations impacting the functional responsibilities of the occupation.
Ability to utilize technological tools (e.g., PC's, web sites) and business system applications to manage, synthesize, and interpret data relevant to workloads, responsibilities, problem identifications and resolutions. Ability to operate relevant personal computing hardware (e.g., personal computers, software, printers, storage media) and standard software (e.g., word processing, graphics packages, spreadsheets/databases).
Knowledge of mechanical engineering theories (e.g., compressible/incompressible fluid flow, Bernoulli's Theorem, thermodynamics, control theory, Mohr's theory of stress) and methods/formula selection (e.g., vibration analysis, seismic analysis, fan laws, load calculations, heat transfer, flow, air/water balancing, root cause analysis, pressure drop).
Knowledge of applicable mechanical engineering regulations/standards (e.g., OSHA, CALOSHA, WISHA, American Society of Mechanical Engineers, American Society Heating, Refrigeration and Air Conditioning Engineers, American National Standards Institute, National Fire Protection Association Standard, Underwriters Laboratory Testing Lab), codes (e.g., Uniform Building Code, Uniform Mechanical Code, Uniform Plumbing Code), and ordinances (e.g., local building code amendments, energy code).
Knowledge of mechanical systems' (e.g., air conditioning, steam, piping, dust collecting, controls, refrigeration, water systems, industrial waste, fire suppression) capability, capacity, operating characteristics (e.g., temperature, pressure, flow, energy efficiencies), and constructability (e.g., space, interface, interference, accessibility).
Ability to use tools and applications in costing and sizing of small to large size projects.
Ability to interpret/develop policies, practices, processes, and procedures as they apply to technical documentation to ensure quality product delivery.
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.
The ability to use established physical, mechanical, or scientific principles and perform appropriate tests to identify and solve problems encountered on the job. This includes the ability to locate and isolate the problem, identify possible solutions, and select approaches that are practical and effective.
Additional Skills:
PROJECT/SKILLS
Proj Sched & Resource Mgmt
Information Technology Fluency
Engr Knowledge/Comprehension
Enabling technology/Innovation & Invention
Engineering Drawings & Specs
Auto CAD fluency
Skills: Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3408-3390-11534
Job Location: Puyallup WA
Per Diem: --
Overtime: --
Start Date: 2022-05-04
Input Date: 04/02/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

We are seeking a Senior Facilities Mechanical Engineer (Level 4) to join our Facilities and Asset Management team located in Auburn, Washington.
This mechanical engineering position will provide leadership on material handling, industrial building HVAC and controls, automation and mechanical systems, reliability and building automation.
This position is based primarily in Auburn, Washington. However, up to 50% travel is required between our Fredrickson (located in Puyallup, WA) and Auburn sites.

Position Responsibilities:
Leads project teams to develop complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural, civil/structural, mechanical, and electrical phases of buildings, equipment installations, utility systems and grounds. Reviews engineering designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials, and takes appropriate corrective action.
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.
Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents.
Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees. Leads the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.
Leads in translation of customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements.
Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Manages the creation of contract scope. Ensures suppliers comply with all contract obligations. Leads in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree or greater in an engineering related field
5+ years of experience reading & understanding engineering drawings, blueprints, schematics, and specifications
3+ years of experience leading engineering teams
3+ years of experience using AutoCAD (or similar CAD package)

Preferred Qualifications (Desired Skills/Experience):
5+ years of experience in a mechanical engineering role
5+ years of experience applying Root Cause Corrective Action (RCCA), or other similar rigorous problem/analysis/resolution, processes to engineering development and manufacturing/production efforts
5+ years of experience assisting with reliability processes in engineering
5+ years of experience in reliability and maintenance methodologies and tools
5+ years of experience repairing and maintaining high pressure steam boilers and air compressors
5+ years of experience working with industrial building HVAC and controls, chilled water, compressed air, process piping, vacuum piping, plumbing, fire protection, and steam & condensate systems
5+ years of experience with applicable codes e.g. NFPA, IBC, UPC, WSEC, and ASME
Experience with electrical, mechanical, and/or structural engineering systems
Remote, onsite or a combination of both? Combination, onsite 2 days week requirement. Eventually more time onsite a week could be required.
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Additional Skills:
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4060-4038-11534
Job Location: Auburn WA
Per Diem: --
Overtime: --
Start Date: 2022-07-11
Input Date: 05/21/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

We are seeking a Senior Level Facilities Electrical Engineer (Level 4) CONTRACTOR to join our Engineering and Technology (E&T) team within Facilities and Asset Management.
You will lead project teams in electrical phases of buildings, equipment installations, utility systems and grounds. This will involve review of electrical designs to assess compliance with customer requirements, building codes and regulations by applying your expertise of construction principles, practices, and materials.
You will also have the opportunity to lead and impact the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning.

Position Responsibilities:
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action.
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.).
Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.
Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements.
Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance.
Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents.
Leads in the translation of customer requirements to design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees.
Analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.
Leads in translation of customer requirements. Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies.
Start Time: 6-7 AM
o Team meeting at 8 am is required.
End Time: 2-3 PM
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree or greater in an engineering related field
5+ years of experience using AutoCAD (or similar CAD package) REQUIRED
5+ years of experience reading & understanding engineering drawings, blueprints, schematics, and specifications
Experience in the switching of high voltage lines and breakers with a minimum of 13.2 KVA

Preferred Qualifications (Desired Skills/Experience):
5+ years of experience in a electrical engineering role
Experience with Arch Flash labeling
Understanding of NFPA 70E standard
5+ years of experience with electrical systems including National Electrical Code, basic relay logic and high voltage systems
5+ years of experience leading engineering teams
5+ years of experience applying Root Cause Corrective Action (RCCA), or other similar rigorous problem/analysis/resolution, processes to engineering development and manufacturing/production efforts
5+ years of experience assisting with reliability processes in engineering
5+ years of experience in reliability and maintenance methodologies and tools
Additional Skills:
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?:
Accountability and Responsibility
Electrical Engineering NEC/Regulations
Electrical Detail Design
Electrical Engineering Drawing
Working in a team environment, be able to collaborate with others on the team, willing/able to work with others.
Ability to project engineer assigned work.

MUST HAVE
Senior engineer that can work project work.
5+ years of experience using AutoCAD (or similar CAD package) REQUIRED
o Remote, onsite or a combination of both? COMBO
Onsite: 3 days on average subject to change.
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.Due to Company education requirements please make sure all submitted candidates have a Bachelor of Science degree or higher in engineering, computer science, mathematics, physics or chemistry. If they do not meet this requirement, please withdraw them from consideration ASAPBasic Qualifications

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3031-3015-11534
Job Location: Tukwila WA
Per Diem: --
Overtime: --
Start Date: 2022-03-25
Input Date: 02/24/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Maint Spec B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Basic knowledge of building codes, regulations and safety procedures. Under general supervision, demonstrates increased skill level in construction to include rough-in and lay-out. Is able to read basic blueprints and becomes familiar with building codes. May be considered an apprentice. Under general supervision, provides general support in response to routine trouble calls. Demonstrated understanding of customer service concepts. Under general supervision, demonstrates increased skill level in the repair and maintenance of plant and office facilities. Uses power tools under general supervision. Under general supervision, uses hand and power tools to construct, renovate and repair facilities and equipment.

The Mesa Facilities and Asset Management (F&AM) organization is seeking a Facilities Plant Maintenance Specialist (Level B) to join our Equipment Maintenance team. This is a 1st shift position located in Mesa, Arizona

This statement of work will involve providing equipment maintenance for manufacturing and test equipment. You will be supporting equipment to include fiber cutting and placement equipment, autoclaves, CNC's, water jets, laser wire markers, trim and drill, NDI (non-destructive inspection), ultrasonic scanners, and x-rays.

Position Responsibilities:

Repairs and maintains equipment & demonstrates experience in these areas under general supervision
Responds to trouble calls and resolves a variety of problems from basic to moderate scope and complexity, with assistance as needed
Follows safety procedures and regulations
Interprets basic schematics and diagrams
Utilizes a variety of hand and power tools to construct, renovate and repair equipment under general supervisior
Works with electrical systems and electronic components of complex industrial machinery and equipment, following manuals, schematic diagrams, blueprints, and other specifications
Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions
May receive specialized equipment training
May provide or support training to customers on the general use of equipment
Requesting contractors who can do 1st or 2nd shift. Please advise your candidates ahead of time.

Employer will not sponsor applicants for employment visa status.

Basic Qualifications (Required Skills/Experience):
High School diploma/GED
Experience performing plant equipment and/or production equipment maintenance
Experience working with detailed work instructions or reading & interpreting blueprints & drawing
Written and verbal communication skills

Preferred Qualifications (Desired Skills/Experience):
Trade school certification or education
1+ year of experience with troubleshooting system faults and developing preventative maintenance plans
1+ year of experience working in a manufacturing environment
1+ year of experience using Maximo or other Computerized Maintenance Software Systems
1+ year of experience with automation systems maintenance, robotics systems, and various types of equipment controllers, such as Siemens 840D, Fanuc, and Allen Bradley PLC's
1+ year of experience with Microsoft Office products like Outlook, PowerPoint, Excel, and Word
Organizational and interpersonal skills & ability to work cooperatively as a team member
Willingness to learn and apply new skills

Typical Education & Experience:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3224-3207-11534
Job Location: Mesa AZ
Per Diem: --
Overtime: --
Start Date: 2022-05-18
Input Date: 03/12/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Plant Maint Spec B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Basic knowledge of building codes, regulations and safety procedures. Under general supervision, demonstrates increased skill level in construction to include rough-in and lay-out. Is able to read basic blueprints and becomes familiar with building codes. May be considered an apprentice. Under general supervision, provides general support in response to routine trouble calls. Demonstrated understanding of customer service concepts. Under general supervision, demonstrates increased skill level in the repair and maintenance of plant and office facilities. Uses power tools under general supervision. Under general supervision, uses hand and power tools to construct, renovate and repair facilities and equipment.

The Mesa Facilities and Asset Management (F&AM) organization is seeking a Facilities Plant Maintenance Specialist (Level B) to join our Equipment Maintenance team. This is a 1st shift position located in Mesa, Arizona.

This statement of work will involve providing equipment maintenance for manufacturing and test equipment. You will be supporting equipment to include fiber cutting and placement equipment, autoclaves, CNC's, water jets, laser wire markers, trim and drill, NDI (non-destructive inspection), ultrasonic scanners, and x-rays.

Position Responsibilities:

Repairs and maintains equipment & demonstrates experience in these areas under general supervision

Responds to trouble calls and resolves a variety of problems from basic to moderate scope and complexity, with assistance as needed

Follows safety procedures and regulations

Interprets basic schematics and diagrams

Utilizes a variety of hand and power tools to construct, renovate and repair equipment under general supervision

Works with electrical systems and electronic components of complex industrial machinery and equipment, following manuals, schematic diagrams, blueprints, and other specifications

Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions

May receive specialized equipment training

May provide or support training to customers on the general use of equipment

Employer will not sponsor applicants for employment visa status.


Basic Qualifications (Required Skills/Experience):

High School diploma/GED

Experience performing plant equipment and/or production equipment maintenance

Experience working with detailed work instructions or reading & interpreting blueprints & drawings

Written and verbal communication skills


Preferred Qualifications (Desired Skills/Experience):

Trade school certification or education

1+ year of experience with troubleshooting system faults and developing preventative maintenance plans

1+ year of experience working in a manufacturing environment

1+ year of experience using Maximo or other Computerized Maintenance Software Systems

1+ year of experience with automation systems maintenance, robotics systems, and various types of equipment controllers, such as Siemens 840D, Fanuc, and Allen Bradley PLC's

1+ year of experience with Microsoft Office products like Outlook, PowerPoint, Excel, and Word

Organizational and interpersonal skills & ability to work cooperatively as a team member

Willingness to learn and apply new skills


Typical Education & Experience:

Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2888-2872-11534
Job Location: Mesa AZ
Per Diem: --
Overtime: --
Start Date: 2022-04-21
Input Date: 02/10/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Facilities Technician

Description:

JOB TITLE : Facilities Technician

LOCATION : Mojave, CA

Join us for an exciting opportunity to create history!

We are a national staffing firm working with some of the top-tier aerospace companies in the world. The contracts are regularly extended, and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description?

    Do you meet the educational requirements for this job?

    Do you meet the experience requirements for this job?

    Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract: Ongoing

    Location: Mojave, CA (90 minutes from Los Angeles, CA)

    Contract 12 mos. - potential for direct hire

    Medical, dental, and vision plan with United Healthcare

    Robust 401K

    Potential for bonuses

    Sick pay, and holiday pay for those who qualify

Summary:

    Assist facilities technicians with preventive maintenance on industrial equipment. Assist facilities technicians with troubleshooting of electrical and mechanical issues. Assist facilities technicians with basic carpentry, mechanical, plumbing, and painting of facilities. Perform cleaning in mechanical rooms and on industrial equipment. Perform outdoor landscaping and yard cleaning.

Desired Skills:

    Ability to stand for extended periods 9 hours minimum. Must be able to lift and handle materials and items up to 50 pounds, and occasionally 50+ with assistance. Must be able to work in uncontrolled outdoor conditions. Such as high winds, and high or low temperatures. Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces. Must have basic understanding of mechanical and electrical principles. Must have basic knowledge of hand and power tools.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential for bonuses, sick pay, and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft,

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2328-2318-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-07-15
Input Date: 11/09/2021
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Readiness Technician B

Description:
Flight Readiness Technician

Job ID # 2022-17177

Contract Opportunity

Location: North Charleston, SC

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 1 Year

 

What You’ll Do:

Perform final component installation and systems operational functional testing.
Perform rework, modification, maintenance, preflight and post-flight checks for delivery.
On this assignment teammates are expected to work safely with the highest quality and integrity.
Collaborate with humility inclusion and transparency and respect one another and advance a global, diverse team.
Perform final component installation and systems operational functional testing.
Perform rework, modification, maintenance, preflight and post-flight checks for delivery.

What You’ll Need:

1-7 Years experience in the following:
Pre Flight- Post Flight- troubleshooting- working on live aircraft
Aircraft maintenance and repair
Major dispatch services
Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations.
Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company.
Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics).
Knowledge of quality systems (e.g., inspection process, Boeing quality procedures).
Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy.
Must be able to stand, lift up to 35lbs and climb stairs
Will be working outside in the elements 100% of the time- Outside on the flightline in all seasons.
787 or composite aircraft experience required
Preferred:
A&P License

 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.




Education & Experience:

High School Diploma/GED combined with 1 + year of relevant work experience; or an equivalent combination of education and experience.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2022-17177
Job Location: North Charleston, SC
Input Date: 08/03/2022
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Flight Readiness Technician B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.


Job Description: South Carolina
Flight Readiness Technician B


Performs final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery.
On this assignment teammates are expected to work safely with the highest quality and integrity. Collaborate with humility inclusion and transparency and respect one another and advance a global, diverse team.
The assignment requires teammates to perform final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery.

Required Skills/Experience
1-7 Years experience in the following:

1. Pre Flight- Post Flight- troubleshooting- working on live aircraft
2. Aircraft maintenance and repair
3. Major dispatch services
4. Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations.
5. Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company.
6. Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics).
7. Knowledge of quality systems (e.g., inspection process, Boeing quality procedures).
8. Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy.
9. Must be able to stand, lift up to 35lbs and climb stairs
10. Will be working outside in the elements 100% of the time- Outside on the flightline in all seasons.
11. 787 or composite aircraft experience required

Preferred:
A&P License
Education:
High School Diploma

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4498-4476-11534
Job Location: North Charleston SC
Per Diem: --
Overtime: --
Start Date: 2022-09-07
Input Date: 07/12/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Joshua Garza
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Flight Readiness Technician B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

These roles will be supporting the 787 program.

Job Description Summary:

On this assignment contractors are expected to work safely with the highest quality and integrity. Collaborate with humility inclusion and transparency and respect one another and advance a global, diverse team.

The assignment requires contractors to perform final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery. Troubleshoots pre-flight and post-flight functions for delivery.

Required Skills/Experience
7 or more Years experience in the following
1. Pre Flight- Post Flight- troubleshooting- working on live aircraft
2. Aircraft maintenance and repair
3. Major dispatch services
4. Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations.
5. Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company.
6. Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics).
7. Knowledge of electrical test methodology (e.g., stand alone bench, automated, integration laboratory, simulation, functional test), planning, procedures, equipment (e.g., multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e.g., pass/fail, control limits, tolerances).
8. Knowledge of quality systems (e.g., inspection process, quality procedures).
9. Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy.
10. Must be able to stand, lift up to 35lbs and climb stairs
11. 787 or composite aircraft

Preferred experience
1. A&P License

Does this position require a U.S person for purposes of Export Compliance?: Yes
Candidates schedule must be flexible- available to work any shift- 1st, 2nd

*Any candidate submitted on 49207-1 that wasn't disqualify or reject and still available please submit on this new req.
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2828-2812-11534
Job Location: San Antonio TX
Per Diem: --
Overtime: --
Start Date: 2022-06-10
Input Date: 02/01/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Flight Readiness Technician B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

These roles will be supporting the 787 program.

Job Description Summary:

On this assignment contractors are expected to work safely with the highest quality and integrity. Collaborate with humility inclusion and transparency and respect one another and advance a global, diverse team.

The assignment requires contractors to perform final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery. Troubleshoots pre-flight and post-flight functions for delivery.

Required Skills/Experience
7 or more Years experience in the following
1. Pre Flight- Post Flight- troubleshooting- working on live aircraft
2. Aircraft maintenance and repair
3. Major dispatch services
4. Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations.
5. Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company.
6. Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics).
7. Knowledge of electrical test methodology (e.g., stand alone bench, automated, integration laboratory, simulation, functional test), planning, procedures, equipment (e.g., multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e.g., pass/fail, control limits, tolerances).
8. Knowledge of quality systems (e.g., inspection process, company quality procedures).
9. Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy.
10. Must be able to stand, lift up to 35lbs and climb stairs
11. 787 or composite aircraft

Preferred experience
1. A&P License

Does this position require a U.S person for purposes of Export Compliance?: Yes
Candidates schedule must be flexible- available to work any shift- 1st, 2nd, 3rd
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2578-2562-11534
Job Location: San Antonio TX
Per Diem: --
Overtime: --
Start Date: 2022-01-31
Input Date: 01/05/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Flightline Mechanic – Systems

Description:

JOB TITLE: Flightline Mechanic Systems

LOCATION: North Charleston, SC

Very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Desired Skills:

KEY SKILLS:

Required Skills/Experience:

    1-7 Years experience in the following: Pre Flight- Post Flight- troubleshooting- working on live aircraft Aircraft maintenance and repair Major dispatch services Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations. Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company. Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics). Knowledge of quality systems (e.g., inspection process, Boeing quality procedures). Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy. Must be able to stand, lift up to 35lbs and climb stairs Will be working outside in the elements 100% of the time- Outside on the flightline in all seasons. 787 or composite aircraft experience required High School diploma/GED or above

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4651-4627-11534
Job Location: North Charleston SC
Per Diem: --
Overtime: --
Start Date: 2022-09-07
Input Date: 08/02/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Joshua Garza
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Fluids Design Engineer

Description:
This position designs hydraulic and pneumatic systems for use on paper machinery.  Fluid designs are integrated with PLC control, and actuate mechanical components as a unified system.
  • Creation of hydraulic and pneumatic circuit drawings.
  • Creation of piping diagrams
  • Creation of Bills of Materials
  • Creation of valve panel assembly drawings
  • Simple to complex layout/design of equipment
  • Component selection
  • System sizing (hydraulic power units, valves, pipes)
  • Engineering calculations for flow and pressure
  • Create installation task lists
  • Participation in installation and start-up as required
  • Participate in customer contact as required
  • Other engineering related activities as needed
  • Provide input to / participate in process improvement programs
  • Provide technical support to other departments

Bachelor’s Degree from a four-year college or University in Electrical Engineering or related technical degree plus 4 years’ experience; or equivalent education and experience.  Must understand fluid circuit design and use AutoCad.  Heavy industrial equipment experience preferred.  Use of Microsoft Office products.
  • Strong interpersonal skills, and the ability to work in a team environment.
  • Competent verbal and written communication skills.
  • Manage multiple conflicting priorities in a fast-paced environment.
  • Flexible and available to interact with customers as required
  • Self-directed and motivated.
  • Take initiative to identify and anticipate customer needs and make recommendations for implementation.
  • Up to 15% travel may be required primarily in USA and Canada.



 

     
Job Number: 2110131488
Job Location: Appleton, WI
Duration: 12 months
Input Date: 05/05/2022
Last Updated: 09/28/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 108 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: kburby@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmojQAC&URLSource=cjhunter

Heavy Structures Mechanic w/ travel assistance

Description:

JOB TITLE: Heavy Structures Mechanic w/ Travel Assistance

LOCATION: San Antonio, TX

$10k total in combined sign on and completion bonuses AND $600 a week in additional per diem for those who qualify! $500 Travel Assistance payable on first paycheck for those who qualify!

Very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job? Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract 12 mos. - potential for extended term $10k total in combined sign on and completion bonuses $600 a week in additional per diem for those who qualify $500 Travel Assistance payable on first paycheck for those who qualify Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

    This mechanic will maintain, repair and modify aircraft structures and structural components of moderate difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation. Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair. Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


POSITION RESPONSIBILITIES:

    Perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas. Locating blind holes necessary for installation of new structural items to existing structure. Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Ability to proficiently access and manipulate computer systems daily for work instructions, drawings, and training. Use of tooling assemblies and fixtures for depot level modification and repair of structural parts. Applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests. This candidate will be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment. Maintain necessary certifications, licenses and permits as required for assigned work. Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Desired Skills:

    Position requires 4+ years of experience in those duties as previously described for satisfactory performance. Demonstrated experience on close tolerance drilling, reaming, removal, and installation to critical support structures including doublers, triplers, seat tracks, planks, stringers, etc. Knowledgeable in shop mathematics and practices Experience in working with schematics, specifications, assembly drawings and standard operating procedures. Proficient in computer skills including but not limited to: aircraft related systems and basic office software The ability to obtain customer approval for aircraft access, for which Dual citizenship or prior citizenship of any other country may preclude the ability to obtain access.
Selected candidates will have:
    4+ years of on-aircraft heavy structures experience. Please clearly indicate on your resume your aircraft platform experience and years of experience with aircraft heavy structures. Demonstrated experience on close tolerance drilling, reaming, removal, and installation to critical support structures including doublers, triplers, seat tracks, planks, stringers, etc. The ability to obtain customer approval for aircraft access, for which Dual citizenship or prior citizenship of any other country may preclude the ability to obtain access.

Preferred Qualifications:
    FAA certification in Airframe and/or Power Plant license is preferred
*Please note* Former military candidates, if trained in Pensacola- they truly have the structures experience the team is seeking Assemblers & composite typically DO NOT have the structures experience required Experience with hand held drilling is a MUST
Note: Travel Assistance, bonuses and per diem provided to those who qualify and is subject to change Reminder- former military members must have terminal leave date on resume to be considered. If they are is currently in the Reserves- please clearly state that on the resume. If they are a civilian contractor working on a based- please state that on resume. If they are active, please consider resubmitting on first day of terminal leave.
Ability to perform the following requirements:
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
Exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
Frequent reaching overhead (3 to 6 hrs)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time
Occasional contact with metals
Frequent exposure to noise

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3392-3374-11534
Job Location: San Antonio TX
Per Diem: --
Overtime: --
Start Date: 2022-08-31
Input Date: 03/24/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Inconen is looking for an Industrial Engineer for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

Duties:
-60% - Optimize Manufacturing & Assembly Operations
Work with factory managers to evaluate manufacturing areas and implement continuous improvement projects and methods aimed at reducing waste, improving flow, improving performance, improving the “visual factory”, and reducing non-conformances. Use lean methods to reduce floor space needed to support efficient hardware fabrication. Perform studies to find ways to eliminate wastefulness in production processes and present findings to area managers. Devise efficient systems and metrics that integrate workers, machines, materials, information, and energy to improve product cost, schedule and or quality.
-20% - Improve Scheduling & Performance Accuracy
View systems as a whole. Asses manufacturing sequences, lead-times, shop floor capacity planning, and area performance to optimize workflow schedules.
Identify system level production constraints and design solutions to resolve constraint.
Support area managers with cost performance analysis, non-conformance analysis, and capacity studies.
20% - Participate and facilitate team projects to resolve operations issues and implement cost reduction initiatives.

Skills:
Required:
-Application of Lean tools & methods to provide business insights
-Work measurement studies (manufacturing standard work) and basic statistical techniques
-Understanding of MRP systems, shop order routings, & resource attributes (including performance, efficiency, & yield factors)
-Performance measurement systems
-Material handling and production planning


Desired:
-Interpret and evaluate data and processes
-Communicate technical information to a wide audience both verbally and in writing
-Use various computer systems to produce reports and spreadsheets
-Comfortable working under limited instruction or guidance to achieve goals and objectives
-Establish working priorities, plan projects, and organize resources

Education:
-Requires a Bachelor's degree in an appropriate discipline and (5) years of experience in a directly related field, or equivalent combination of education and experience.
 
Job Number: 18375
Job Location: Canoga Park, CA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/16/2022
Last Updated: 08/09/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Industrial Engineer

Description:
PDS Tech is recruiting for Industrial Engineers in Waterloo, Ia.
Ideally looking for 1-2+ years exp. but will hire a fresh grad IE with relevant internship & time studies exp.
BS degree in engineering
Exp. with shop floor manufacturing and distribution processes, quality, tooling etc.

Look for fresh grad/Early career IE or Mfg. Engineer with any Time Studies exp. and shop floor exp. in a similar manufacturing setting
 

     
Job Number: 2210150955
Job Location: Waterloo, IA
Duration: 12 months
Input Date: 04/08/2022
Last Updated: 09/28/2022
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 214/647-9600
800 Phone: 800/270-4737
Email: ringle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jpZ4QAI&URLSource=cjhunter

Industrial Engineer

Description:
Join us for an exciting opportunity to create history!

We are a national staffing firm working with some of the top-tier aerospace & spaceship companies globally. Our client is looking for Industrial Engineer to start work right away.

Details
Contract: 6-12 months (possibility of going full time)
Location: Mojave, CA (90 minutes from Los Angeles, CA)

Summary
• Responsible for manufacturing process development, implementation, and continuous improvement to enhance quality, reduce cost, and improve productivity/schedule.
• Support manufacturing safety, production planning, and coordination, execution, and operations process development
• Provide, develop and update metrics to track efficiencies, including planned versus actuals
• Identify root cause, proactive implement corrective and or preventive action to reduce scrap, rework and improve quality
• Improve manufacturing efficiency by analyzing and planning workflow space, processes, and requirements, including equipment/facilities layout/5S implementation
• Develop and support methods that systematically reduce costs through equipment and processes improvements
• Improve manufacturing efficiency by developing time studies and developing criteria for operational steps
• Support input and maintenance of standards for work estimation/bidding

Qualifications
• Must have a B.Sc. Engineering degree from an accredited university
• Two (2) or more years of relevant aerospace, manufacturing, processes, and specifications, including high-performance composites fabrication and structures Engineering design software a plus.
• Knowledge of Kaizen and Lean Manufacturing techniques

About Us
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of Aerospace OEM's and Tier 1 suppliers across the United States.

We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential to earn bonuses, sick pay, and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
 
Job Location: Mojave, CA
Rate: 50-70
Per Diem: Possible
Overtime: Possible
Duration: 6-12 mos
Start Date: ASAP
Input Date: 10/19/2021
Last Updated: 09/27/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Industrial Engineer - Contract - Aerospace Industry Experience a MUST

Description:
This Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.
MUST have 6+ years in the aerospace/aircraft industry.

Duties and Responsibilities:
1. Leading process optimization efforts to address specific business requirements and to eliminate waste from assembly processes.
2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.
3. Implementing productivity improvements.
4. Working with cross functional teams to develop best practice solutions.
5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.
6. Implementing mistake-proofing controls to maintain or improve process quality.
7. Conducting root cause analyses to address specific process or quality problems.
8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.
9. Performing Time Studies to understand processes and performance metrics.
10. Documenting processes using process mapping and value stream mapping.
11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.
12. Designing facility layout alternatives.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
CATIA and AutoCAD experience is a plus.
Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
Strong analytical skills coupled with a creative and open mind towards alternative methods.

Knowledge, Skills and Abilities:
Strong analytical and innovative skills.
Strong work ethic.
Ability to multitask.
Ability to work under minimal supervision.
Detail oriented.
Excellent problem solving skills.
Ability to read and interpret engineering drawing and/or specification requirements.
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: $45-60/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/28/2021
Last Updated: 09/27/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Industrial Engineer 2

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
Position is100% onsite
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Additional Skills:
PROJECT/SKILLS
Work Measurement Techniques
Supply Chain Strategy
Proj Sched & Resource Mgmt
Process Modeling
Process Management Skills
Information Technology Fluency
Design Concepts & Techniques
Engineering Processes
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3552-3534-11534
Job Location: Moses Lake WA
Per Diem: --
Overtime: --
Start Date: 2022-06-15
Input Date: 04/06/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 2

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
4x10 shifts
Additional Skills:
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2999-2983-11534
Job Location: Mesa AZ
Per Diem: --
Overtime: --
Start Date: 2022-05-18
Input Date: 02/18/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 2

Description:
Description

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Work Measurement (Time Studies and Process Observations), excel: data input and data analysis, power point: reports and presentations
Bachelor’s degree in related field or 3+ year experience in process improvements.

Additional:
Excel
PowerPoint
 
Job Number: 45264-1
Job Location: Everett, WA
Rate: DOE
Per Diem: yes
Input Date: 01/28/2022
Last Updated: 09/27/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Industrial Engineer 2

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
Additional Skills:
PROJECT/SKILLS
Analytical Skills (Technical)
Capacity Management
Critical Path Methodology
Engineering Economics Analysis
Design Concepts & Techniques
Information Technology Fluency
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.PROJECT/SKILLS Analytical Skills (Technical) Capacity Management Critical Path Methodology Engineering Economics Analysis Design Concepts & Techniques Information Technology Fluency

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2565-2549-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-01-13
Input Date: 12/29/2021
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 2

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Type of background you are looking for (education, # yrs experience, etc.):
Bachelor's degree in related field or 3+ year experience in process improvements or work measurement
Software skills required:
Excel
PowerPoint

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 1972-1975-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-01-10
Input Date: 12/10/2021
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
Position is 100% onsite
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Additional Skills:
PROJECT/SKILLS
Work Measurement Techniques
Supply Chain Strategy
Proj Sched & Resource Mgmt
Process Modeling
Process Management Skills
Information Technology Fluency
Design Concepts & Techniques
Engineering Processes
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3553-3535-11534
Job Location: Moses Lake WA
Per Diem: --
Overtime: --
Start Date: 2022-06-15
Input Date: 04/08/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 3- VC

Description:
This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Job is100% onsite
Are you okay with out-of-state candidates? Yes, must relocate at own expense
Interview/hiring process? (ex: select based on resume, phone, in person, panel, etc.) Phone screen
Job Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Supporting VC25B
Additional Sills:
Accountability and Responsibility
Analytical Skills (Technical)
Assembly Process
Design Concepts & Techniques
Critical Path Methodology
Engineering Economics Analysis
Mathematical Reasoning
Process Management Skills
Work Measurement Techniques
Education:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4453-4431-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-07-19
Input Date: 07/20/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
Position is 100% onsite
Are you okay with out-of-state candidates?: Yes, must relocate at own expense
Additional Skills:
PROJECT/SKILLS
Work Measurement Techniques
Supply Chain Strategy
Proj Sched & Resource Mgmt
Process Modeling
Process Management Skills
Information Technology Fluency
Design Concepts & Techniques
Engineering Processes
Skills: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3554-3536-11534
Job Location: Moses Lake WA
Per Diem: --
Overtime: --
Start Date: 2022-06-15
Input Date: 04/08/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineer 4

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

The Vertical Lift team is seeking a highly motivated and highly technical Senior Industrial Engineer to drive efficiency in the highly dynamic Depot Repair and Overhaul facility for AH-64 Apache and AH-6 product lines. Position is located in Mesa, AZ

The selected candidate will demonstrate the Company Behaviors and First-Time Quality while contributing to the delivery of Industrial Engineering services supporting Apache aircraft production and component repair and overhaul for USG and International customers.

Position Responsibilities:

Coach and mentor junior engineers and collaborate with teammates across multiple disciplines and functions in our effort to sustain AH-64 and AH-6 products around the globe.

Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.

Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers).

Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.

Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization.

Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule.

Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.

Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).


The position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skill/Experience):

5+ years of experience with business problem identification, data collection and preparation, interpretation and problem solving

5+ years of experience in aerospace manufacturing operations and/or manufacturing support

5+ years of experience in oversight of budget, development of quarterly EAC, program health metrics, earned value, and management of program critical path

5+ years of experience communicating across organizations with suppliers and leadership


Preferred Qualifications (Desired Skills/Experience):

Experience working with the following software and database technologies is preferred: the Aurora Client, Job Sequencing and Scheduling Toolkit, Capacity Management, Electronic Bar Chart (EBC), E-Visuals, Priority Board, & Mantis

Experience working in both a development and sustaining program environments

1+ years with Manufacturing Execution Systems common image (MESci)

Excellent written, verbal communication and presentation skills

Typical Education/Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2659-2643-11534
Job Location: Mesa AZ
Per Diem: --
Overtime: --
Start Date: 2022-01-14
Input Date: 01/07/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Industrial Engineers

Description:
All industries, nationwide.

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 01/24/2022
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Industrial HVAC and Maintenance Mechanic

Description:
An Industrial HVAC and Maintenance Mechanic job in Mesa, AZ is currently available through Belcan with one of our Construction clients. You will be responsible to troubleshoot all aspects of Medium/High Voltage equipment for an industrial steel production facility. This job is a direct opportunity with excellent benefits!

Industrial HVAC and Maintenance Mechanic Job duties:

* Diagnose malfunctioning systems, apparatus, and components using test equipment, hand tools and personal knowledge to determine root cause
* Use SAP maintenance module in the execution of duties, utilize computers to acquire information, documentation, account for time and corrective actions
* Determine grades and sizes of bolts, pipes, tubing, cables, and wires
* Monitor and inspect equipment for defects. Properly remove defective parts by dismantling devices using hoists, overhead cranes, hand, and power tools
* Possess specific fundamental knowledge of bearings, power transmission equipment, hydraulics/pneumatics, lubrication, welding principles, rigging, overhead cranes, gearboxes, and mobile equipment operation
* Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends

Qualifications:

* High School Diploma or GED
* HVAC Technical School preferred not required
* 2+ years of electrical maintenance experience
* Must be able to interpret blueprints, drawing, and schematics
* Determine grades and sizes of bolts, pipes, tubing, cables, and wires
* Experience with welding, cutting, fabrication, and equipment maintenance
* Ability to stand, walk, bend, and work in heights for extended periods of time in extreme temperatures.
* Ability to work rotating shifts which include weekends and holidays
* 1+ years of HVAC experience required
* Industrial heating and AC repair experience preferred

If you are interested in this Industrial HVAC and Maintenance Mechanic job in Mesa, AZ, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 326416
Job Location: Mesa, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/08/2022
Last Updated: 09/28/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=326416&job_number=326416

Integrated Plng & Sched Spec 2

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Program Management - Integrated Planning and Scheduling Associate

Defense, Space & Security (DS) is seeking multiple Integrated Planning and Scheduling Associates, early career positions to work in St. Louis, MO. Position are within the Site's Master Production and Program Scheduling organization that covers Fixed Wing Aircraft, Tooling, Weapons and Special Projects.

This position is expected to be 100% onsite.

Position Responsibilities:
Supports preparation, development and coordination of an integrated plan and schedule to meet program and/or project requirements.
Assists with the development of program plans, schedules and coordinates with affected organizations, documents work statements and resulting schedules.
Supports the integration of program plans and schedules, horizontally and vertically, across company functional, product groups, suppliers and partners of moderate complexity.
Identifies and reports performance variances.
Develops the Integrated Master Production Plan, schedule and supports change incorporation plans related to Integrated Scheduling products.
Participates in the review of proposed changes to the baseline.

Basic Qualifications (Required Skills/Experience):
Bachelor's degree or higher.
Experience in program planning, project management, integrated scheduling, Industrial Engineering, Business Operations, Supplier Management, shop floor Operations and/or related disciplines.
Experience working with and partnering with cross-functional teams on projects and initiatives
Experience working with Microsoft Office Applications

Preferred Qualifications (Desired Skills/Experience):
Experience with scheduling tools e.g. OPP, Microsoft Project, RAIDSS, or other Project Management Software is a plus.
Additional Skills:
Skills: Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+1 years' related work experience , 7 years' related work experience, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2683-2667-11534
Job Location: Berkeley MO
Per Diem: --
Overtime: --
Start Date: 2022-04-11
Input Date: 01/14/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Integrated Plng & Sched Spec 3

Description:
Job Description: Prepares, develops, coordinates, integrates, analyzes and maintains, integrated plans and schedules for proposals, projects, programs and major initiatives at all levels across functional value streams to meet program and/or project objectives. Tracks, plans, schedules and performs risk analysis for projects, programs and change activities throughout the lifecycle of a program. Performs studies/analysis and planning efforts, within and/or across programs/projects, organizations or business units to determine impacts, constraints and plans involving product development, production rates, process improvement, or program initiatives. Develops the Integrated Master Plan, Integrated Master Schedule and supporting elements, and drives program planning through the Enterprise Gated Process in support of Program requirements and objectives. Performs integration of program plans and schedules, horizontally and vertically, across company functional, product groups, suppliers and partners. Identifies, analyzes and reports schedule performance variances. Performs schedule-related risk and opportunity analyses and provides potential solutions to management. Works with customers to develop performance recovery plans and incorporates in relevant documentation where appropriate. Performs schedule, event and change impact analysis. Oversees implementation planning for change requirements and ensures commitment of stakeholders. Develops and posts planning, scheduling and change related metrics/reports. Maintains disciplined revision control of all planning/schedule baselines.

Requirements:
    Analytical Skills (Technical): Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources. Critical Path Methodology: Knowledge of critical path network methodology (e.g., logic, relationship/interdependency, early/late, start/complete, minimum duration). Earned Value Management: Knowledge of the Earned Value Management System (EVMS) and its application. Engineering Processes:Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics). Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business). Operations Processes: Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics). Proj Management Theory/Concept: Knowledge of Project Management theory, concepts and principles (e.g. theory of constraints, critical path methodology, project risk management, triple constraints, project scope management, project management lifecycle etc.) contained in the Project Management Body of Knowledge (PMBOK[R] Guide). Proj Sched & Resource Mgmt: Ability to create project schedules to identify overall timeframe for project activities to meet the defined project objectives (to include major milestones), identify resource requirements for projects, and manage those resources throughout the project life cycle. Scheduling Tools: Knowledge of master scheduling tools (e.g., #1 Flow, critical path analysis, trend analysis, improvement curve theory, precedence network). Systems Thinking: Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.
Potential for extension and/or conversion.
Candidates will be required to work on site 100% of the time for the first few months but will allow for hybrid work in the future.
Additional Skills:
Skills: Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4362-4339-11534
Job Location: Berkeley MO
Per Diem: --
Overtime: --
Start Date: 2022-08-15
Input Date: 06/29/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Integrated Plng & Sched Spec 3

Description:
This is a very exciting opportunity to work with one of the world's largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available.
Job Description: Prepares, develops, coordinates, integrates, analyzes and maintains, integrated plans and schedules for proposals, projects, programs and major initiatives at all levels across functional value streams to meet program and/or project objectives. Tracks, plans, schedules and performs risk analysis for projects, programs and change activities throughout the lifecycle of a program. Performs studies/analysis and planning efforts, within and/or across programs/projects, organizations or business units to determine impacts, constraints and plans involving product development, production rates, process improvement, or program initiatives. Develops the Integrated Master Plan, Integrated Master Schedule and supporting elements, and drives program planning through the Enterprise Gated Process in support of Program requirements and objectives. Performs integration of program plans and schedules, horizontally and vertically, across company functional, product groups, suppliers and partners. Identifies, analyzes and reports schedule performance variances. Performs schedule-related risk and opportunity analyses and provides potential solutions to management. Works with customers to develop performance recovery plans and incorporates in relevant documentation where appropriate. Performs schedule, event and change impact analysis. Oversees implementation planning for change requirements and ensures commitment of stakeholders. Develops and posts planning, scheduling and change related metrics/reports. Maintains disciplined revision control of all planning/schedule baselines.

Requirements:
    Analytical Skills (Technical): Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources. Critical Path Methodology: Knowledge of critical path network methodology (e.g., logic, relationship/interdependency, early/late, start/complete, minimum duration). Earned Value Management: Knowledge of the Earned Value Management System (EVMS) and its application. Engineering Processes: Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics). Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business). Operations Processes: Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics). Proj Management Theory/Concept: Knowledge of Project Management theory, concepts and principles (e.g. theory of constraints, critical path methodology, project risk management, triple constraints, project scope management, project management lifecycle etc.) contained in the Project Management Body of Knowledge (PMBOK[R] Guide). Proj Sched & Resource Mgmt: Ability to create project schedules to identify overall timeframe for project activities to meet the defined project objectives (to include major milestones), identify resource requirements for projects, and manage those resources throughout the project life cycle. Scheduling Tools: Knowledge of master scheduling tools (e.g., #1 Flow, critical path analysis, trend analysis, improvement curve theory, precedence network). Systems Thinking: Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.
Potential for extension and/or conversion.
Candidates will work on site 100% of the time at first but hybrid work will be allowed in the future.
Additional Skills:
Skills: Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 4361-4338-11534
Job Location: Berkeley MO
Per Diem: --
Overtime: --
Start Date: 2022-08-24
Input Date: 06/29/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Integrated Plng & Sched Spec 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Seeking an Integrated Planning & Scheduling Specialist in OKC

The successful candidate will be able to develop detail-level schedules (below the IMS) for a variety of product value chains from design through delivery. They will demonstrate a commitment to cross-functional integration and engagement, detailed impact analysis, configuration control and change management, vertical alignment throughout schedule tiers, and data-driven performance analysis and reporting. Candidates with Integrated Planning and Scheduling, Manufacturing Engineering, and Industrial engineering experience will likely be well-suited to this position.

Position Responsibilities:
Leads, develops, coordinates, integrates, analyzes, and maintains Commitment Plans and Schedules for complex projects, programs, and change driven activities.
Leads, directs, facilitates and ensures integration of project/program plans and schedules, horizontally and vertically, across company functional, product groups, suppliers and partners.
Develops and establishes lead time requirements and identifies production constraints for a variety of product value chains.
Leads in studies/analysis and planning efforts within and/or across programs/projects, organizations or business units to determine impacts, constraints, and plans involving product development, process improvement, or program initiatives.
Provides analysis and product development initiatives for manufacturing, program and support organizations.
As part of Change Management, conducts impact analysis for program schedules, realigning tasks as required to support production requirements and meet company strategy for work placement.
Provides coaching, mentoring and leadership to lower level employees.

Basic Qualifications (Required Skills/Experience):
Bachelor's degree or higher
3+ years' experience scheduling experience in an engineering and manufacturing environment
3+ years' experience do you have in a finance, scheduling, industrial engineering, change management, strategy, program management, or project management role

Preferred Qualifications (Desired Skills/Experience):
Understanding of lead time analysis and its value to program management, engineering, and supply chain management
Demonstrated ability to integrate work flows across a variety of business and engineering functions
Please make sure the below information is included in the notes of candidates profile for consideration
Current Location:
Availability to relocate:
Degree:
Additional Skills:
Skills: Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2910-2894-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-03-25
Input Date: 02/10/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Integrated Plng and Sched Spec 3 -Baseline/Change Management

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Seeking an Integrated Planning & Scheduling Specialist in OKC

The successful candidate will be able to develop detail-level schedules (below the IMS) for a variety of product value chains from design through delivery. They will demonstrate a commitment to cross-functional integration and engagement, detailed impact analysis, configuration control and change management, vertical alignment throughout schedule tiers, and data-driven performance analysis and reporting. Candidates with Integrated Planning and Scheduling, Manufacturing Engineering, and Industrial engineering experience will likely be well-suited to this position.

Position Responsibilities:
Leads, develops, coordinates, integrates, analyzes, and maintains Commitment Plans and Schedules for complex projects, programs, and change driven activities.
Leads, directs, facilitates and ensures integration of project/program plans and schedules, horizontally and vertically, across company functional, product groups, suppliers and partners.
Develops and establishes lead time requirements and identifies production constraints for a variety of product value chains.
Leads in studies/analysis and planning efforts within and/or across programs/projects, organizations or business units to determine impacts, constraints, and plans involving product development, process improvement, or program initiatives.
Provides analysis and product development initiatives for manufacturing, program and support organizations.
As part of Change Management, conducts impact analysis for program schedules, realigning tasks as required to support production requirements and meet company strategy for work placement.
Provides coaching, mentoring and leadership to lower level employees.

Basic Qualifications (Required Skills/Experience):
Bachelor's degree or higher
3+ years' experience scheduling experience in an engineering and manufacturing environment
3+ years' experience do you have in a finance, scheduling, industrial engineering, change management, strategy, program management, or project management role

Preferred Qualifications (Desired Skills/Experience):
Understanding of lead time analysis and its value to program management, engineering, and supply chain management
Demonstrated ability to integrate work flows across a variety of business and engineering functions

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2389-2378-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-02-08
Input Date: 11/18/2021
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Interior Design Engineer

Description:

We are a national staffing firm working with some of the top-tier aerospace companies in the world! And we are looking for first-class employees to work with our clients.

Details:

    Location: Greensboro, NC Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

    Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application. Develops designs for form/fit/function to meet customer and design criteria. Provides designs for the fabrication process including sheet metal, extrusions and inject molding Validates engineering designs per engineering core principles, design standards, processes and industry best practices. Makes recommendations to engineering lead/management. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes. Ensures adherence to program schedule. Performs other duties as assigned.

Desired Skills:

    Bachelors' degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.) Masters' degree in Engineering preferred. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft. Working knowledge of conceptual design development of aircraft interiors. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc). In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T). Familiarity with 14CFR Part 23/25. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc). Proficiency in Teamcenter (or equivalent PLM tool). Ability to work independently or within a team environment. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2716-2700-11534
Job Location: Greensboro NC
Per Diem: --
Overtime: --
Start Date: 2022-07-13
Input Date: 01/18/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Interior Design Engineer

Description:
Interior Design Engineer
Description

General Summary:

The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:

Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application. Develops designs for form/fit/function to meet customer and design criteria. Provides designs for the fabrication process including sheet metal, extrusions and inject molding Validates engineering designs per engineering core principles, design standards, processes and industry best practices. Makes recommendations to engineering lead/management. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes. Ensures adherence to program schedule. Performs other duties as assigned.

Qualifications

Education, Work Experience, Certification and/or Licensure:

Bachelors' degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.) Masters' degree in Engineering preferred. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:

Working knowledge of conceptual design development of aircraft interiors. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc). In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T). Familiarity with 14CFR Part 23/25. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc). Proficiency in Teamcenter (or equivalent PLM tool). Ability to work independently or within a team environment. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 902-907-11534
Job Location: Greensboro NC
Per Diem: --
Overtime: --
Start Date: 2021-12-08
Input Date: 12/09/2021
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Lead Quality Assurance Engineer

Description:

If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver, and can make things happen - apply today!

This is a very exciting opportunity to work with one of the world's most exciting aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Lead Quality Assurance Engineer
    Manage day to day operations of the quality engineering department interfacing with other departments and the QE manager Represents QE Management in various cross-functional activities with a primary emphasis on compliance to established QMS requirements Provide technical support along with training & mentoring to quality engineering staff in different programs Oversee metric/data collection and reporting from all programs and create/suggest process improvements as needed Champions or delegate with effective direction on long lead improvement activities to ensure departmental and organizational success Perform other activities as assigned by Quality Management

What you bring

    Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Industrial Engineering, or Quality Systems from an accredited university or college (or a high school diploma / GED and a minimum of 4 years of relevant experience in Quality or Engineering) Additional 5 years of experience within a Quality or Engineering position in aircraft/spacecraft assembly or aircraft parts fabrication environment CQE /CQA preferred but not required Strong knowledge in aerospace assembly practices Skilled in use of standard Microsoft Office programs Experience with FAA Part requirements (21,25) & AS9100 standards Proven communication & presentation skills across business levels in verbal and written formats Proven analytical and organizational ability Ability to coordinate multiple projects simultaneously and lead small teams Ability to read and interpret drawing and specifications requirements, with a general understanding of geometric dimensioning and tolerance (GD&T Process improvement experience using lean or six sigma methodologies Proven data collection and analysis skills

Physical and/or Additional Requirements

    Must be able to stoop, bend, crawl, and being able to maneuver in tight Physically able to handle items weighing up to 50lbs (unassisted). Ability and willingness to meet required travel expectations: ~10%

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 3311-3293-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 03/17/2022
Last Updated: 09/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Elle King
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

Liaison Engineer II

Description:
Job Description
    Do you enjoy designing and developing innovative solutions to solve tough problems? Join our team to deliver technological solutions in a rapid and agile production environment. Our Mechanical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from orbital systems to space exploration systems. You'll conceptualize and deliver complex mechanical structures and systems and your technical duties include the design and development of new products and processes throughout the product lifecycle.

    Liaison engineering team members are responsible as Design Engineering's primary interface for manufacturing floor activity for Uncrewed Dream Chaser (UDC) and Cargo Module (CM) fabrication on the CRS2 program. Liaison's goal is to ensure design requirements are met between production, planning, and supply chain, while maintaining schedule. Through a detailed understanding of the build processes, engineering change processes, design requirements and extensive collaboration with the internal teams designing and managing installations, this team is a key stakeholder to ensure that the overall build of UDC and CM design achieves all objectives.

    The ideal candidate will excel in a demanding, fast-paced, and evolving environment where they will work as part of a strong, agile and highly motivated team to accomplish