Job Search Results

534 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/07/31 Saturday 10:46AM Pacific Time by ContractJobHunter. )

Listings 1 - 534

Go To My Job Tracker

Expand all descriptions

4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 07/31/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

4 Mechanical Systems Design Engineers Needed

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Number: 491
Job Location: Greensboro, NC
Rate: $60-$66/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year +
Start Date: 4-6 Weeks
Input Date: 07/12/2021
Last Updated: 07/31/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

7 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with CPD, composite workbench.

We are seeking 7 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 07/31/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 07/26/2021
Last Updated: 07/31/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 07/19/2021
Last Updated: 07/31/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Mechanic

Description:
PDS Tech is seeking A&P Mechanics in Newburgh, NY.
In your role, you will:

  • Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems.
  • Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft.
  • Required to tow and move aircraft during the performance of maintenance duties.
  • Assists in the cleaning of parts and components during the repair and assembly of aircraft.
  • Performs other tasks and duties associated with the aircraft operation


 

 

 


EDUCATION: • High school education or equivalent required • A&P License is required. • Experience or working knowledge of mechanical devices. Prefer basic knowledge of aircraft systems.

Experience on mechanical repair of vehicles, preferably aircraft –through technical training, apprenticeship, schooling, or similar experience is preferred.

Must be able to obtain and maintain an airport security badge through the local airport authority, if applicable.
 
 
Job Number: 2110124651
Job Location: Newburgh, NY
Duration: 3 months
Input Date: 04/06/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PSXoQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
An Advanced Engineering Technician job in Scottsdale, AZ is currently available through Belcan. In this role, you will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Engineering Technician Job duties:

* Interprets basic engineering drawings, diagrams and schematics
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems
* Conducts, analyzes and documents statistically based experiments to define process parameters
* Implements and documents complex solutions for process improvement
* Designs and constructs basic tooling and fixtures to accomplish unique tasks
* Organizes, analyzes and interprets data to identify cause/effect relationships and recommends resolution/process improvement

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience
* Solid knowledge and proficiency in the use of fabrication tools
* Ability to fabricate complex hardware
* Solid knowledge of generally accepted technical theory


If you are interested in this Advanced Engineering Technician position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312982
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/28/2021
Last Updated: 07/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13370

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
Interpret basic engineering drawings, diagrams and schematics
Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
Conduct, analyze and document statistically based experiments to define process parameters
Implement and document complex solutions for process improvement
Design and construct basic tooling and fixtures to accomplish unique tasks
Organize, analyze and interpret data to identify cause/effect relationships and recommends resolution/process improvement

What You’ll Need:

Secret Clearance
Solid knowledge and proficiency in the use of fabrication tools
Ability to fabricate complex hardware
Solid knowledge of generally accepted technical theory
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
Superior communication and collaboration skills

Education & Experience:

Associate’s Degree in a related discipline or equivalent combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13370
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 06/03/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13317

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment.
Interpret basic engineering drawings, diagrams and schematics
Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
Conduct, analyze and document statistically based experiments to define process parameters
Implement and document complex solutions for process improvement
Design and construct basic tooling and fixtures to accomplish unique tasks
Organize, analyze and interpret data to identify cause/effect relationships and recommends resolution/process improvement

What You’ll Need:

Solid knowledge and proficiency in the use of fabrication tools
Ability to fabricate complex hardware
Solid knowledge of generally accepted technical theory
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
Superior communication and collaboration skills

Education & Experience:

Associate’s Degree in related discipline or equivalent is required combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13317
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 05/27/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2021-13315

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 years

 

What You’ll Do:

Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment.
Interpret basic engineering drawings, diagrams and schematics
Construct, modify, debug, troubleshoot, calibrate, test and adjust a variety of tools, equipment and systems
Conduct, analyze and document statistically based experiments to define process parameters
Implement and document complex solutions for process improvement
Design and construct basic tooling and fixtures to accomplish unique tasks
Organize, analyze and interpret data to identify cause/effect relationships and recommends resolution/process improvement

What You’ll Need:

Solid knowledge and proficiency in the use of fabrication tools
Ability to fabricate complex hardware
Solid knowledge of generally accepted technical theory
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
Superior communication and collaboration skills

Education & Experience:

Associate’s Degree in a related discipline or equivalent combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13315
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 05/27/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician - 2nd Shift

Description:
An Advanced Engineering Technician - 2nd Shift Technician job in Scottsdale, AZ is currently available through Belcan. In this role, you will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Engineering Technician - 2nd Shift Job duties:

* Interprets basic engineering drawings, diagrams and schematics
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems
* Conducts, analyzes and documents statistically based experiments to define process parameters
* Implements and documents complex solutions for process improvement
* Designs and constructs basic tooling and fixtures to accomplish unique tasks
* Organizes, analyzes and interprets data to identify cause/effect relationships and recommends resolution/process improvement

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience
* Solid knowledge and proficiency in the use of fabrication tools
* Ability to fabricate complex hardware
* Solid knowledge of generally accepted technical theory


If you are interested in this Advanced Engineering Technician - 2nd Shift position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312983
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/28/2021
Last Updated: 07/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician - Secret

Description:
An Advanced Engineering Technician - Secret job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's Degree in a related discipline, plus a minimum of 3 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Advanced Engineering Technician - Secret Job duties:

* Interprets basic engineering drawings, diagrams and schematics.
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems.
* Conducts, analyzes and documents statistically based experiments to define process parameters.
* Implements and documents complex solutions for process improvement.
* Designs and constructs basic tooling and fixtures to accomplish unique tasks.

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.
* Solid knowledge of generally accepted technical theory.
* Solid knowledge and proficiency in the use of fabrication tools.
* Ability to fabricate complex hardware.

If you are interested in this Advanced Engineering Technician - Secret position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313164
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/05/2021
Last Updated: 07/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Manufacturing/Production Operator

Description:
Advanced Manufacturing/Production Operator

Job ID # 2021-13415

Contract Opportunity

Location: Bloomington, Minnesota

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Perform fabrication or inspection functions in a research, production or pre-production environment by reading and interpreting moderately complex schematics and drawings.
Follow more advanced methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, coating operations on circuit boards, subassemblies or units, we’ll rely on you to build or integrate hardware for prototypes, subassemblies or systems, perform moderately complex electrical tests along with more complex rework and refurbishment of hardware and systems.

What You’ll Need:

Ability to perform more advanced loading and configuring of customer/standard software on customer device
Ability to accurately complete process paperwork and entering data into the applicable work order management system
Solid computer, communication and time management skills
Solid knowledge of measuring/test equipment and math
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
Preferred experience:
Experience operating the MyData100 and MyData15 SMT pick and place machines, EKRA screen printing, AOI quality testing, BTU convection oven reflow, soldering electronic or electromechanical assemblies, previous certification to J-STD-001E

Education & Experience:

High School Diploma/GED combined with 4 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13415
Job Location: Bloomington, MN
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 06/07/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Structural Dynamic Analysis Engineer - Aircraft - China.

Description:
Advanced Structural Dynamic Analysis Engineer - Aircraft - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Advanced Structural Dynamic Analysis.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Experienced in conventional structural dynamic response analysis software (NASTRAN, ANSYS, etc.).
  • Working experience in vibration field (more than 10 years).
  • Solid and rich mechanical vibration professional foundation.
  • Working experience in international Aerospace companies with a  doctoral degree  preferred.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
  • Modelling analysis and optimization of structural dynamic characteristics (modal, response).

 Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-366
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Assembler-Vertical Lift

Description:
Aircraft Structural Assembler-Vertical Lift

Job ID # 2021-13345

Contract Opportunity

Location: Mesa, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment.
Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one Assembly to another as with fairings and the mating of major assemblies callouts, butt, station and water lines; blind pick up of hole locations for blank parts from existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gauges and scales.
Report all non-conformances to manufacturing supervision or corrective action representative.
Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Report on job status and restraints to coworkers and supervision;
Identify production inefficiencies and suggests potential improvements to product or process.

What You’ll Need:

Knowledgeable and skilled in basic sheet metal, riveting, assembly methods and common shop practices.
Knowledgeable and able to interpret and work from blueprints, sketches and written and verbal instructions.
Knowledgeable and able to apply shop math.
Knowledgeable and able to use computer systems for office and shop applications.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.

Education & Experience:

High School Diploma/GED

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/

 
 
Job Number: Job ID # 2021-13345
Job Location: Mesa, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/02/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Assembler

Description:
Position Overview:
Make sub-assemblies consisting of printed circuit boards with applicable components.  Assembles a completed
electro-mechanical unit utilizing sub-assemblies, air tools, and miscellaneous parts.

Major Tasks and Responsibilities:
  • Assembles printed circuit boards by insertion of applicable components in through-hole fashion utilizing specific work instructions, procedures and various hand and air tools.
  • Installs sub-assemblies, miscellaneous hardware into specific unit enclosures at a final assembly level utilizing specific work instructions, procedures and various hand and air tools.
  • Above processes include electrical function test at printed circuit board and final assembly level accomplished by utilizing test fixtures provided by electrical engineering.
  • Other duties as required (i.e. packing, etc.)


Qualifications:

  • Minimum 4+ months production work experience within a manufacturing industry.
  • An electro-mechanical aptitude is desirable.
  • Ability to work cross-functionally with individuals and teams to achieve department/production goals.
  • Strive for continuous process improvement in daily activities.
  • Ability to follow through on tasks assigned to completion.
  • Must be able to stand at work station for 8 hours.
  • Must be able to lift up to 26 lbs.


Education and Experience:

  • High school diploma/GED


Physical Requirements:
While performing the duties of this job, the employee is regularly required to stand 8 to 10 hours a day depending on shift.  Also sit, talk, hear, and walk.  The employee will frequently be required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl.  The employee must occasionally lift and/or move up to 26 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
 

 
Job Number: 2110131334
Job Location: North Kingstown, RI
Duration: 3 months
Input Date: 05/18/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Joe Coccia
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmQBQA0&URLSource=cjhunter

Assembler

Description:
PDS Tech is looking for Assemblers for our client in Collierville, TN. Candidates will gain valuable experience working in a world-class manufacturing facility. These positions are full time positions and candidates will work directly with the client. 

Job responsibilities:

Position components and/or sub-assemblies in correct relationship by either manual means or by using locating fixtures

Technical Tasks:
  • Secure with mechanical fasteners (screws, clips, etc.) or adhesives
  • Check parts and alignment, setting aside faulty material and notifying Supervisor
  • Clean parts and/or sub-assemblies as required
  • Repair damage to painted parts with brush or spray
  • Connect to gas/air/electric test equipment and check as specified
  • Package, carton and identify (stencil, etc.)
  • Determine and record production counts
  • Keep equipment and working area clean and in good order
  • Perform quality checks as required
  • Responsible for quality and parts that meet customer expectations
  • Meet customer deadlines 

Qualifications
  • Ability to acquire necessary skills/knowledge/certifications as required
  • Previous experience working successfully in a team environment
  • Ability to handle multiple tasks
  • Effectively interact & communicate within team and other functional groups
  • Solid work history
  • Education/Experience: High School Diploma or equivalent


 
 
Job Number: 2110124396
Job Location: Collierville, TN
Duration: 3 months
Input Date: 02/01/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PRh6QAG&URLSource=cjhunter

Assembler A

Description:
Chipton-Ross is seeking 3 Assembler A's located in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

REQUIRED EXPERIENCE:
***Manufacturing experience in semiconductor products, medical devices.
-Intricate work on microscope
-Handling fragile materials
-Familiar with and has chemical usage experience
-Vacuum systems

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Must be available to work any shift:
Shift: 1, 2 or 3
Start Time: 1st: 6am, 2nd: 2pm, 3rd: 10pm
End Time: 1st: 2:30am, 2nd: 10:30pm, 3rd: 6:30am

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 189080
Job Location: Sylmar, CA
Rate: $DOE
Duration: 9 months
Input Date: 01/27/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: khardage@chiptonross.com
Website: www.chiptonross.com

Assembler A

Description:
Chipton-Ross is seeking 4 Assembler A's located in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

REQUIRED EXPERIENCE:
- Computer literate
- Must be able to read, write and speak English language

Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.

Safety
Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances

Safety shoes are required.
Completely cover the toes, heels and top of your foot.
Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric,
Heels are less than 2 inches high and have heel base greater than 1 square inch.
Soles are at least " thick

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift

Assignments may require contractors to change shifts and work frequent overtime.

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 190706
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 04/19/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 04/13/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

Assembly Operator

Description:
Chipton-Ross is seeking an Assembly Operator for an opening in Tempe, AZ.

RESPONSIBILITIES:
The Assembly Operator's primary function is to perform a variety of tasks to assemble potted modules that meet all specifications and that only quality product moves forward. The ideal candidate must be able to multitask in a manufacturing environment for the purpose of assembling or inspecting night vision assemblies against set criteria with collected data for use in the production and compliance assurance of image tubes.

All of the work will be performed in an environment that requires prolonged sitting or standing.


Must be able to consistently report to work and be on time for scheduled shift
Ability to work with small fragile parts
Ability to follow work instructions and make operation entries on computer terminals
Microscope and inspection experience
Use of hand tools and specialized testing equipment
Participate in process improvements
Keep work area orderly and clean
Teamwork oriented
Work with engineering and engineering technicians
Perform other duties as assigned

REQUIREMENTS:
1 to 2 years related work experience
Previous ISO environment experience
Attention to detail
Knowledge of all safety (mechanical, chemical, electrical) procedures applicable to the job
J-STD solder certification and/ or experience preferred
Lean manufacturing principles and 5-S
Computer experience required and Microsoft literacy preferred

EDUCATION:
HSD/GED

SHIFT:
9/80 work week
2:30 P.M. to 12:00 A.M.
 
Job Number: 189461
Job Location: Tempe. AZ,
Rate: Up to $15.00 DOE
Duration: 5 months
Input Date: 04/10/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Automotive Bench Technician

Description:
PDS Tech Inc., is seeking a Bench Technician I in Auburn Hills, MI

Responsibilities:
• Building wire harnesses and test boxes for bench test systems and vehicle builds.
• Fabricate brackets to mount ADAS sensors to vehicles.
• Fabricate brackets to mout data acquisition systems and/or ground truth reference systems in vehicles.
• Perform functional bench tests of ADAS products and data acquisition systems.
• He/she will report to and receive training, daily guidance and work packages from the ADAS Supervisors and their staff.  Additional support and guidance will be provided by the Contract Company’s Team leader.
 
Requirements:
• Associates degree in a technical field (preferably automotive).
• 2+ years’ experience in an electrical/electronic test lab environment.
• Excellent organizational, verbal and written communications skills - communicate in English clearly and effectively.
• Computer proficiency with basic computer programs including the Microsoft office suite (Word, Excel, and PowerPoint).
• Ability to read/understand electrical schematics.
• Familiar with automotive hardware, such as switches, relays, power distribution, etc.
• Proficient with common hand tools, power tools, soldering equipment, and multimeters.
• Posses the mechanical ability to build and de-bug wire harnesses and break-out boxes.
• Well motivated, self-starter, high integrity, and team player.
• Able to work in a team environment, flexible, and able to multitask to meet project timing (time management skills)
• Valid driver’s license with clean driving record.
• Must be able to lift 25 pounds.
• Logical problem solver with good attention to detail.

Preferred Qualifications:
• 3+ years’ experience in automotive component testing.
• Component Data analysis post processing; compiling and analysis of test results.
• ADAS component and feature knowledge.
• Computerized data logging systems experience
 
Job Number: 2010117893
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/20/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Melissa Cuellar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P3iuQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician IV

Description:
An Avionics Technician IV job in Louisville, Colorado is currently available through Belcan. You will be responsible for using your skills and expertise to perform a variety repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will need an High School Diploma and +10 years of Avionics equipment repair experience in Satellite/Aerospace/Aviation/Defense equipment.

JOB DUTIES:
* Leads a group through the build and test processes to support production efforts
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers
* Works with the program team to support the production schedules
* Performs wiring harness routing and installation in confined spaces following specified procedures
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards
* Tests electrical assemblies by manual and automated means
* Assists engineering with performing tests, collection of test data, troubleshooting, and assessing the manufacturability of new cabling designs
* Performs basic mechanical and electrical removals and installations
* Performs and documents all work according to established company processes
* Observes all safety precautions when working with ESD sensitive hardware

REQUIREMENTS:
* +15 years of Avionics Experience
* HS Diploma min
* Modifications, Repairs, Assemblies
* Avionics Installation, tooling, wiring, wiring repair, soldering, crimping
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Rate: Up to $36/hr DOE

If you are interested in this Avionics Technician IV job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




 
Job Number: 312221
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/04/2021
Last Updated: 07/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 07/30/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

CNC & Manual Machinists-1st and 2nd shift

Description:
As a CNC and/or manual Machinist you will play an important role in our shop.   You will have the opportunity to work with an amazing team of tradespeople. You will learn about our world-class products and will have the opportunity to proudly apply your skills in machining on our equipment.
  • Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
  • Plans stock inventory by checking stock is correct to the part being made.
  • Programs mills and lathes by entering instructions, including zero and reference points; setting tools, offsets, compensation; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
  • Sets-up mills and/or lathes by installing and adjusting three-jaw chucks, installing and indicating vices, fixture plates, parallels, tools, attachments, stops.
  • Loads machine by lifting stock into position either into a vice, three jaw chuck or to a fixture plate/parallels.
  • Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards.
  • Ability to take measurements accurately using various measurement tools; micrometers, calipers, set up and read bore gage.

To succeed in this role, you will need: 
  • High School Diploma or equivalent
  • Certificate or diploma in CNC Machine Tool a plus
  • 2-3 years’ experience as a CNC or manual machine operator.
  • Ability to translate mechanical documents and engineering drawings.
  • Great attention to detail with a goal-driven attitude.
  • Ability to accept responsibility and account for his/her actions.
  • Ability to perform work accurately and thoroughly.
  • Ability to pay attention to the minute details of a project or task.
  • Experience with Vertical Lathes and/or Horizontal Boring Machines

 
Job Number: 2110132727
Job Location: Lenox, MA
Duration: 6 months
Input Date: 05/28/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqR5QAK&URLSource=cjhunter

CNC Machinist / Programmer

Description:
PDS TECH INC is currently looking for a Sr CNC Machinist / Programmer for our client in Santa Clarita. 

Responsible to program, machine and improve the efficiency and cost of manufacturing prototype components designed by engineering.   Design tooling, fixtures and create manufacturing process from scratch to be able to manufacture the complex parts from engineering designers.  Provide mechanical, manufacturing guidance to the engineering department  during concept of designs and before drawings are released to ensure components are designed for manufacturability requirements.

Minimum of a High School diploma. Understanding and knowledgeable of geometry and trigonometry principles. Some machine shop/manufacturing technology and tooling coursework. 
7 years of experience programming 5 axis CNC, creating tooling, fixtures and manufacturing processes to manufacture components.
5 years’ experience running Mazak multi-axis using Mazatrol and/or CAM software including creating tool path process.
Experience in modifying engineering models for the appropriate CNC machines; designing CAD models and developing manufacturing process to machine complex parts.
Complete understanding of reading blueprints and drawings.
Experience with lathes Mills-Horizontal and Vertical CNC Milling Machines; CNC Turning Center; Drill press; Band and. Horizontal saw and Deburring with hand tools. Experience with had CNC multi-axis grinding background would be preferred. Ability to effectively interface with multiple departments and personality types. 
Strong understanding and experience with close tolerance machining and using precise measuring tools.
Comprehensive knowledge of machine setup procedures.

US Citizenship required.

If you are interested, please send resume to: denglert@pdstech.com then call DJ 714-384-0004
 

 
Job Number: 2110124626
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 02/02/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PSRBQA4&URLSource=cjhunter

CNC Operator

Description:
CNC Machinist
Primary Objective: 
Supports production operations by performing moderate to difficult machining operations.  A CNC Machinist II operates various types of machine tools and performs progressive machining operations for metal parts, tools and machines with close tolerance and focus on high quality and accurate parts.  May suggest edits to the NC programmer in the course of making parts. 

Key Job Duties:   
Reads and interprets specific machining instructions from complex blueprints, part and machine drawings.
Must be able to set up all tooling, write and execute complex programs.
Sets up, operates and programs a broad range of production work involving close tolerance and set ups that are exacting that are somewhat involved and have moderate to high degree of difficulty.
Performs other secondary operations such as stamping part numbers and deburring during machine cycle times.
Inspects machine parts to ensure they meet proper size, shape, or tolerance specs using micrometers and other measuring tools and devices.
Performs routine maintenance.
Performs quality audits of completed work within the machine shop department.
Must be able to write programs without assistance.
Participates in and contributes to the lean manufacturing journey.
Assists in other areas and performs additional tasks as needed.
Position may transition to second shift
 
Requirements
High School Diploma or GED required
Technical Degree in Machine Tool Technology or related field preferred
Must be good at problem solving, have good mechanical aptitude, and able to learn and understand job methods and instructions in a timely manner
2+ years of relevant machining experience desired
Excellent work history desired
Must be able to stand for long periods of time and regularly lift 50+ pounds on a regular basis
 
 
Job Number: 2010118545
Job Location: Oneida, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P5sNQAS&URLSource=cjhunter

CREO Aircraft Structures Mechanical Engineers and Designers

Description:
Looking for CREO degreed and non degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
 
Job Number: PL CREO
Job Location: WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/14/2021
Last Updated: 07/30/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Cabin Stress Engineer

Description:
PDS Tech is seeking candidates for a Cabin Stress Engineer position in Mobile, AL

Position Summary:



The Stress Engineer (Contract) will apply knowledge of engineering principles, theories, concepts, industry practices and standards to deliver high quality design engineering solutions while assuring procedural compliance within assigned engineering project teams.



Primary Responsibilities:



  • Plan, organize and prioritize work contents based on project deliverables.
  • Perform detailed stress analysis of aircraft cabin or cargo components, by classical hand analysis as well as Finite Element methods, to support the structural design efforts of new and modified components from the conceptual phase to development and certification.
  • Generate stress substantiation reports.
  • Develop or review structural qualification plans in accordance with Company standards and regulatory requirements.
  • Review and approve vendor drawings, stress reports, and test reports when delegated.
  • Coordinate with design engineers, team lead, suppliers and technical management personnel to assure that the design meets or exceeds the project deliverables and complies with the regulatory requirements.
  • Coordinate stress activities Company and Suppliers
  • Participate in regularly scheduled design reviews, and is responsible to present stress findings and challenge design solutions.
  • Develop research plans and participate in industry committees at company's request. Maintains a current knowledge of developments in the field of Structural Mechanics in order to recommend innovations to improve the quality, performance, cost of the company product.
  • Compile and generate progress reports to convey deliverable objectives.
  • Provide guidance to junior level stress engineers with regards to analysis methods, process or tools.
  • Demonstrate a strong work ethic and sense of urgency for completing work assignments.

Experience / Skills / Training:



  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 2 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad. HyperMesh
  • Exposure to FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools

 

Education / Special Qualifications:



Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering


 
Job Number: 2110129256
Job Location: Mobile, AL
Duration: 6 months
Input Date: 06/08/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PgiyQAC&URLSource=cjhunter

Catia V5 Mechanical System Design Engineer-Savannah GA

Description:
Must be proficient in Catia V5 and preferably Catia V4 with Smarteam experience. Must have experience with design and electrical equipment installations or aircraft mechanical systems design. Previous aircraft modification experience is desired.


If you are interested in this contract position and would like to apply, simply send me an e-mail with your up to date resume.

davellino@advancedtechno.com
 
Job Number: GA3625
Job Location: GA
Rate: 65/70hr.
Per Diem: Available
Overtime: most likely
Duration: long term
Start Date: 2/3 wks from offer
Input Date: 05/05/2021
Last Updated: 07/30/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Lead Engineer, Lunar Lander

Description:

The Chief Engineer: Lunar Lander will lead the design, assembly, test and operations of the lunar lander. The ideal candidate will have experience with the full life cycle of space programs from conception to operations and have proven success in leading engineering teams to achieve ambitious goals.
Duties & Responsibilities



  • Lead the technical decision-making process and guide technical development across all lunar lander subsystems disciplines 
  • Lead technical reviews, engineering change, and configuration management process adherence
  • Oversee vehicle level systems engineering processes including trade studies, applying industry standards, requirements development, verification and validation planning
  • Identify technical issues and proactively implements resolutions to mitigate schedule and cost impacts
  • Provide technical mentorship to team members and monitor technical integrity of all team member contributions

 
Professional Requirements

  • A Bachelor’s degree, Master’s or PhD preferred -- in Aerospace, Electrical, or Mechanical Engineering.
  • Experience as the technical lead designing, developing, building, and testing of spacecraft or satellites.
  • A minimum of 5 years of experience in design, development, test, and operations across multiple programs
  • Experience taking a product from concept phase through prototyping, launch and operations
  • Must be able to quickly develop subject matter expertise in a specific project.
  • Previous experience in a technical leadership role for a complex aerospace project.


  • A strong grasp of systems engineering practices 
  • Excellent communication skills

Additional Desired Skills and Experience --  

  • A minimum of 10 years experience in design, development, test, and operations across multiple programs 
  • Experience with lunar or deep space missions and technology development for these missions
  • Hands on experience in assembly, integration and testing of space hardware


 
Job Number: 2110129523
Job Location: Mojave, CA
Duration: 36 months
Input Date: 04/23/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PhIOQA0&URLSource=cjhunter

Completions Electrical Interiors, Engineer 4

Description:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Unique Skills:
• Capitol Harness &/or Mentor Graphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
• Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
• Catia V5 basic navigation experience.
• Aircraft electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-506
Job Location: Savannah, GA
Rate: $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/02/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Component Qualification Test Engineer

Description:
PDS Tech is seeking a Component Qualification Test Engineer that is familiar with the Sikorsky Test / Supplier Quality process in Stratford CT

The ideal candidate will:
  • Support and manage Hydro-Mechanical and Electro-Mechanical Supplier Component laboratory tests to validate component designs
  • Write technical documents for development and qualification requirements, procedures and results
  • Review supplier qualification plans, procedures, and reports and drawings.


Primary reason for this sub-contractor is to support supplier qualifications on FVL programs.




  
Must have:
  • Understanding of Supplier Component Qualification process
  • Expose and experience with the Sikorsky Supplier Qualification process and norms.
  • BS degree or higher in Mechanical Engineering
  • 20+ years of experience.
  • Ability to travel, including out of the country.
  • Knowledge of system engineering.

 
Job Number: 2010118879
Job Location: Stratford, CT
Duration: 15 months
Input Date: 11/14/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6jlQAC&URLSource=cjhunter

Configuration Manager - Level 2 / Level 3

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Pay Range: Level 2 = $40.00 - $43.75/HR / Level 3 = $50.00 - $53.85/HR
Schedule: 9/80

** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Hardware Configuration Management role. NOT a Software Configuration role **

Duties:
-Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.

-25% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
-25% - Perform validation of manufacturing bills-of-material and their attribute data.
-20% - Perform Contract and Supplier Data Management processing in accordance with program data requirements and statements of work.
-15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
-10% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
-5% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required.
-Proficiency with Microsoft Office products (e.g., Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 15242
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 06/29/2021
Last Updated: 07/30/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Construction Supervisor

Description:
Chipton-Ross is seeking a Construction Supervisor for an opening in San Diego, CA.

RESPONSIBILITIES:
Develop, deliver, and present project plans and schedule.
Develop contract documents for work activities (civil, structural, mechanical, electrical); lead job walks; support proposal review and selection.
Review and approve construction submittals.
Present Environmental, Health, and Safety (EH&S) requirements to contracted workers coming onsite, review plans for safety concerns, and monitor job site for safe practices.
Proactively monitor and verify work activities are progressing according to schedule; identify concerns and develop mitigations. Report on project status.
Conduct inspection and operational verification of installed components and systems, includes equipment such as pumps and motors, in accordance with design drawings/specifications and industry practices.
Verify quality of work and coordinate inspection by the Quality Assurance group.
Review and approve invoices.
Manage change orders and revision of contract documents.
Create punch lists and see-through correction of defective work.
Supervise system startup and commissioning.
Supervises the budgetary, costing and final inspection of construction projects.
Supervises outside contractors and conducts construction surveillance to ensure adherence to construction requirements.
Ensures compliance with company policy, procedures and safety regulations.
Documents and maintains required paperwork pertaining to work projects.
Maintain the strict confidentiality of sensitive information.
Performs other duties as assigned.


REQUIREMENTS:
May substitute equivalent experience in lieu of education. Must demonstrate expertise of building and site design, construction, operation and maintenance as well detailed and extensive knowledge of design and construction methods and processes related to building construction and maintenance. Must have knowledge of codes, standards and regulations as they apply to design, construction, operations and maintenance of buildings and building sites. Must be able to organize, schedule, conduct, and coordinate workloads and staff to meet established milestones. Must be customer focused and possess: (1) a valid California driver's license with a good driving record verified by the DMV; (2) the ability to identify issues, analyze and interpret data; (3) good analytical, verbal and written communication skills to accurately document, report, and present findings to a variety of audiences including management and external parties; (4) strong interpersonal skills to influence and guide all levels of employees; (5) the ability to maintain the confidentiality of sensitive information; (6) the ability to select, train, and motivate personnel; (7) the ability to represent the company on external projects; and (8) strong computer skills. Must be able to work extended hours and travel as required

Must demonstrate expertise of building and site design, construction, operation and maintenance as well detailed and extensive knowledge of design and construction methods and processes related to cooling water system piping fabrication and installation.
Must have knowledge of codes, standards and regulations as they apply to design, construction, operations and maintenance of buildings and building sites.
Must be able to organize, schedule, conduct, and coordinate workloads and staff to meet established milestones.
Must be customer focused and possess: (1) the ability to identify issues, analyze and interpret data; (2) good analytical, verbal and written communication skills to accurately document, report, and present findings to a variety of audiences including management and external parties; (3) strong interpersonal skills to influence and guide all levels of employees; (4) the ability to maintain the confidentiality of sensitive information; (5) the ability to represent the company on external projects; and (6) strong computer skills.
Must be able to work extended hours and travel as required.


EDUCATION:
Bachelor's degree in architecture, engineering, facilities management or a related discipline and nine or more years of progressive professional experience in construction or facilities management with at least three of those years in a management role.

SHIFT:
5/40
 
Job Number: 190766
Job Location: San Diego, CA
Rate: $DOE
Duration: 7 months
Input Date: 04/20/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Silmese Graves
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: sgraves@chiptonross.com
Website: www.chiptonross.com

Creo/Windchill Mechanical Designer (Structures)

Description:
Seeking Creo/Windchill Mechanical Designer (Structures):
•Design and maintenance of structural product definition by preparing design layouts and drawings in Creo, modifying existing designs and resolving design discrepancies

•Experience with Design for Manufacturing and Design for Assembly
If qualified, email a WORD version copy of your resume along with your hourly pay rate and then call Peggy at 774-210-4108 to discuss. Referrals appreciated!
 
Job Number: PL Creo Structures
Job Location: Renton, WA
Rate: $50-60/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2 weeks
Input Date: 02/08/2021
Last Updated: 07/30/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Customer Service and Parts Sales Coordinator

Description:
This position is responsible for selling machine parts and auxiliary machinery to new and existing customers, generating parts and machine quotations, handling customer inquiries, and working with technical team members in the field. This position also provides technical support to customers, to meet their expectations and maintain positive relationships. This position is also responsible for the administration of the Return Goods Policy and Procedure.
  1. Responds to customer service calls regarding equipment, operational problems, trouble-shooting and part identification. When necessary, relays information and directs customers and potential customers to find the information they need.
  2. Creates parts quotes for both manufactured and purchased parts, as well as auxiliary machinery. Ensures that quotes are prepared accurately and efficiently for timely presentation to the customers.
  3. Proactively contacts all customers on customer calling list, at least once a month, to check on the status of equipment at their facilities and offer assistance with any problems.
  4. Periodically visits customer plants to maintain and improve customer relations.
  5. Sells and processes parts orders and auxiliary machine orders, retrofit kits and service contracts.
  6. Establishes manufactured and purchased parts quotes accurately and efficiently for presentation to the customer.
  7. Enters and maintains purchased and manufactured parts pricing in computer system.
  8. Initiates credit memos to ensure customers receive proper credit, when applicable.
  9. Prepares monthly customer mailers, and sends them to all customers in database. Responsible for maintaining an accurate, up-to-date customer database.


  1. Responsible for administration of the Return Goods Procedure which involves issuing RGAs to customers, initiating the proper paperwork, and returning items to suppliers for repair or replacement.
  2. Acts as an agent for external manufacturers by supplying units, parts and services. This involves price quotes, placing purchase orders and ensuring orders from the vendor are received and examined before re-shipment to customers.
  3. Responsible for machinery set-up at trade shows. Assists with the operation of equipment during the duration of the show, and meets with customers and potential customers.

An Associate's Degree in business or equivalent experience/training, plus two or more years of experience in technical sales.  A technical background, both mechanical and electrical, along with the ability to read engineering drawings, is preferred. Requires attention to detail, accuracy, a high energy level and superior communication skills, both oral and written. Must be able to work under stressful conditions with frequent interruptions. Knowledge of computerized order entry systems and database programs required. Must have a working knowledge of an integrated manufacturing system.  Additionally, training in a second language (preferably Spanish) would be beneficial.
 
 
Job Number: 2110131778
Job Location: Appleton, WI
Duration: 6 months
Input Date: 05/26/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PnfSQAS&URLSource=cjhunter

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Kent, WA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. Position Responsibilities:
-Works with customers (internal and external) to develop and document complex avionics, electronic and electrical system lab requirements/architectures, including simulation requirements
-Analyzes and translates requirements into lab architecture, hardware and software simulation designs and interface specifications
-Develops trade studies, analyzes results, and performs design reviews
-Develops and maintains electrical product detail, assembly and lab installation designs (e.g., power, harness routing and payloads)
-Monitors supplier performance to ensure system integration and compliance with requirements
-Supports fabrication and integration through disciplined trouble-shooting, problem-reporting, and root-cause corrective action processes. Integration activities involve avionics, mechanical systems and software.
-Conducts tests and validates electrical system to ensure system designs meet operational and functional requirements
-Must possess good organizational, interpersonal, and problem solving skills
-Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments
-Ability to adjust priorities to multiple demands and unanticipated events

REQUIRED EXPERIENCE:
- Must have a Bachelor's, Master's, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ADDITIONAL EXPERIENCE:
- Electrical Engineering degree preferred
- Electrical power systems experience
- Space-related product / program experience (i.e. satellites, spacecraft, missile systems, etc.)

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 190031
Job Location: Kent, WA
Rate: $DOE
Duration: 12 Months
Input Date: 03/15/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Kent, WA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments. Position Responsibilities:
-Works with customers (internal and external) to develop and document complex avionics, electronic and electrical system lab requirements/architectures, including simulation requirements
-Analyzes and translates requirements into lab architecture, hardware and software simulation designs and interface specifications
-Develops trade studies, analyzes results, and performs design reviews
-Develops and maintains electrical product detail, assembly and lab installation designs (e.g., power, harness routing and payloads)
-Monitors supplier performance to ensure system integration and compliance with requirements
-Supports fabrication and integration through disciplined trouble-shooting, problem-reporting, and root-cause corrective action processes. Integration activities involve avionics, mechanical systems and software.
-Conducts tests and validates electrical system to ensure system designs meet operational and functional requirements
-Must possess good organizational, interpersonal, and problem solving skills
-Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments
-Ability to adjust priorities to multiple demands and unanticipated events

REQUIRED EXPERIENCE:
- Must have a Bachelor's, Master's, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ADDITIONAL EXPERIENCE:
- Electrical Engineering degree preferred
- Electrical power systems experience
- Space-related product / program experience (i.e. satellites, spacecraft, missile systems, etc.)

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 190032
Job Location: Kent, WA
Rate: $DOE
Duration: 12 Months
Input Date: 03/15/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Die Maintenance

Description:
Job purpose
Responsible for die maintenance, die installation, effective evaluation and repair of dies.
Essential Functions
  • Support equipment / die downtime in a dynamic fast-paced environment.
  • Develop and support die maintenance and improvement projects.
  • Support weekend and shutdown die issues.
  • Support training of other die associates.


  • Support of the engineering group in short / long term projects.
  • Support machine checks, preventative maintenance duties, line troubleshooting and reporting of problems and repairs;

Additional Responsibilities

  • Performs other duties as assigned.
  • Utilizes hand tools, power tools, and hoists/cranes to repair and maintain dies and associated equipment.
  • Utilizes calipers, micrometers and other gauges to evaluate production components.
  • May be trained and assigned to operate a forklift.
  • Keeps work area clean of debris and safety hazards.
  • Complies with Safety Policies and reports unsafe conditions.
  • May be trained and assigned to perform Plant Start-up & Shutdown Procedures and Weekend/Holiday Shutdown Facilities Check.
  • Work on daily activities as assigned by the Team Leader.
  • Respond to die downtime and recovery issues.
  • Monitor dies for potential problems identification.
  • Perform quality & running efficiency improvements to the dies.
  • Perform scheduled preventative maintenance plans & activities.
  • Quality confirmation of completed work.
  • Perform zone inspections.
  • Perform all phases of die and associated troubleshooting on electrical, mechanical, hydraulic, and/or pneumatic systems including process water controls and lines


Education, Experience and Competencies

  • High School Diploma or equivalent and a minimum of five (5) years of experience as a maintenance technician.
  • Ability to read, write, speak and understand English well.
  • Must demonstrate capability of using hand and power tools.


  • Understands safety policies, quality policy and environmental policies.
  • Has basic understanding of GD&T etc.
  • Ability to analyze die & process problems and implement repairs & countermeasures for:


  • Hydraulic cylinder issues
  • Mechanical issues
  • Ability to weld & hard finish.
  • Demonstrate solid “Troubleshooting” skills.
  • General computer/data entry skills.
  • General electrical troubleshooting.
  • General machine tool knowledge.
  • Understanding of 2D drawings.
  • Ability to be a self-starter, learn on a continual basis, train others and work well in a team atmosphere.
  • Capability to work with minimal supervision.
  • Good communication skills.
  • Basic knowledge of mechanical, electrical, hydraulic, and pneumatic functions and components.
  • Ability to demonstrate a proactive approach with die maintenance and Ability to troubleshoot.
  • Team Oriented.


  • Self-starter imitative / Drive/ Eager to learn.


 
Job Number: 2110130144
Job Location: Ridgeville, SC
Duration: 6 months
Input Date: 04/27/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pj0VQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer

Job ID # 2021-13334

Contract Opportunity

Location: San Antonio, TX

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

Minimum Education: Associate’s Degree

Minimum Experience: 6 Years

 

What You’ll Do:

Develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
Use design tools prepares documentation and incorporates design changes.
Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Support engineering system design and functionality validation activities.
Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
Coordinate activities and products with internal partners and external suppliers.
Works under minimal direction.

What You’ll Need:

Ability to Obtain Secret Clearance

Education & Experience:

Associate’s Degree in a related discipline combined with 6 + years of relevant work experience; or an equivalent combination of education and experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
 
Job Number: Job ID # 2021-13334
Job Location: San Antonio, TX
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 06/01/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer

Job ID # 2021-13335

Contract Opportunity

Location: San Antonio, TX

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Allow the possibility to see your released engineering be installed while supporting the build during shipside support.
Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design.
Lead, develop, and maintain cable/wire harness detail and assembly designs.
Perform design reviews to validate spatial integration and requirements verification.
Develop and maintain electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry).
During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
Document processes, specifications and procedures that support the design and manufacture of electrical commodities.
Develop basic statements of work.
Analyze functional and physical input to assure development of complete integrated design.
Work under minimal direction.
Develop, maintain and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
Use design tools prepares documentation and incorporates design changes.
Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Support engineering system design and functionality validation activities.
Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
Coordinate activities and products with internal partners and external suppliers.
Work under minimal direction.

What You’ll Need:

Ability to Obtain Secret Clearance

Education & Experience:

Associate’s Degree combined with 3 + years of relevant work experience; or an equivalent combination of education and experience.

What to Expect:

Applicants selected for employment will be required to pass a preemployment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/jobseekers/

For more information about Moseley visit: http://www.moseleytechnical.com/aboutus/
 
Job Number: Job ID # 2021-13335
Job Location: San Antonio, TX
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 06/01/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electrical Aircraft Interiors Engineer with Mentorgraphics

Description:
===========================================
Engineer Contractor 3 - Electrical Interiors in Savannah, GA
Unique Skills:
• Capitol Harness &/or Mentorgraphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: PL Elec Interiors
Job Location: Savannah, GA
Rate: $60-65/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/23/2021
Last Updated: 07/30/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer - Technical Design

Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
Using design tools prepares documentation and incorporates design changes.
Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Supports engineering system design and functionality validation activities.
Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
Coordinates activities and products with internal partners and external suppliers.
 
Job Number: TD_TX
Job Location: San Antonio, TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 06 months
Start Date: ASAP
Input Date: 06/07/2021
Last Updated: 06/11/2021
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Engineer

Description:
PDS Tech working with a local DOD company seeking a qualified Electrical Engineer for its Hypersonics line of business in Huntsville, AL for a Contract to Direct Opportunity! 

The successful candidate will serve as an Electrical Engineer with duties that span design of both hardware and software, test equipment, supporting manufacturing activities, and working with sub-contractors/suppliers on electrical aspects of Hypersonic Glide Bodies (HGB). Specific duties may encompass analog/digital circuit design, working with software running on a real-time operating system, utilizing LabVIEW on test equipment and/or supporting design for hardware-in-the-loop (HWIL) equipment. Work will be conducted in an integration/production facility along with a laboratory environment.


Basic Qualifications:

  • A Bachelor’s degree in Electrical Engineering or Computer Engineering, Physics, EE Technology from an ABET accredited school is required. No Mechanical or Aerospace degrees
  • Candidate should have at least 5 years of relevant experience.
  • Circuit design experience – analog, digital, power
  • Experience with electrical schematics and cable diagrams
  • Experience with support equipment activities both electrical and mechanical
  • A foundational understanding of ESD, FOD, and acceptance testing


Nice to Have:

  • Software skills – C, MATLAB, Simulink
  • Real-time Operating System – Speedgoat or similar
  • LabVIEW
  • Experience with Mentor Graphics DxDesigner, Altium, OrCAD, or similar


Candidate must be a resident of the North Alabama area or willing to relocate to the Huntsville - North Alabama, AL area.

 
Job Number: 2110123369
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 02/02/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PNRkQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer
East Syracuse, NY

Performs research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Required:
• Proficient in electro-mechanical design
• Ability to read and modify electric schematics, write electrical systems requirements
• Understanding of electrical analysis, electrical protection power consumption
• Experience with wiring, connectors, harnessing
• Capable of providing technical leadership to junior engineers, self-directed and highly motivated
• Possess analytical thinking, troubleshooting, and problem-solving skills
• Ability to learn new tools, methods and technologies as requirements evolve
• Strong communication and organizational skills
• Comfortable with both collaborative and independent work in a global team setting
 
Job Number: 58182
Job Location: Glen Burnie, MD
Rate: 95.00
Duration: 1 year
Start Date: asap
Input Date: 06/10/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jim Pyle
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Engineer, in East Syracuse, NY.

Description:

Engineering - Electrical - Experienced Performs research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes. Typically 4 - 8 years of relevant experience
Job Specific Requirements    
Required:
• Proficient in electro-mechanical design
• Ability to read and modify electric schematics, write electrical systems requirements
• Understanding of electrical analysis, electrical protection power consumption
• Experience with wiring, connectors, harnessing
• Capable of providing technical leadership to junior engineers, self-directed and highly motivated
• Possess analytical thinking, troubleshooting, and problem-solving skills
• Ability to learn new tools, methods and technologies as requirements evolve
• Strong communication and organizational skills
• Comfortable with both collaborative and independent work in a global team setting


 
Desired:
Development, Technology and Methodology
• Experience in power supplies, batteries, power converters
• Controller I/O understanding/experience
• Familiarity with HVAC&R equipment and systems
• Experience in new product design and qualification
• Proficient in modern experimental methods, instrumentation, and measurement systems
• Ability to lead and work on multiple projects simultaneously
• Ability to coordinate activities in a global team environment


Customer Focus:

• Create, refine and clarify requirements with engineers from different technical background.
• Understand the end-user application of products and impact on controls.
• Evaluate and respond to customer questions and issues.


Education:

B.S. degree in Electrical Engineering with 7-10 years of experience in electrical systems design and qualification.
M.S. degree in Electrical Engineering with 3-5 years of experience in electrical systems design and qualification.

 
Job Number: 2110132771
Job Location: East Syracuse, NY
Duration: 12 months
Input Date: 06/01/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqWjQAK&URLSource=cjhunter

Electrical Engineer - ECU and LRU Design

Description:
ABOUT THE JOB:
Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 5+ years Aerospace circuit design experience
• Control systems and/or supporting component hardware design experience
• Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
• Experience developing hardware requirements from system requirements and managing those requirements
• Engines/Propulsion, APU, or Flight Controls experience
• Schematic capture
• In-depth circuit analysis and simulation
• DOORS proficiency
• Effective communication skills (both verbal and written)
• Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:
• Engine ECU and LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 07/22/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Email: RTC-TalentMgmt@Real-Time-Consulting.com
Website: www.real-time-consulting.com

Electrical Engineer - Test Facility

Description:
ABOUT THE JOB:
Primary job focus is design and risk mitigation of gas turbine propulsion test systems of all types and sizes, from complete test facilities to individual test benches.

REQUIRED SKILLS:
• Bachelor of Science degree in Electrical or Mechanical Engineering.
• Minimum 5 years of Electrical Engineering experience.
• Experience in industrial automation including control design and implementation.
• Minimum 2 years of Electrical drawing experience, AutoCad or AutoCad Electrical with an ability to review drawings, catch errors and provide corrective feedback on designs.
• Minimum 2 years of PLC ladder logic programming experience with experience with PLC hardware and HMI user interface screens.
• An understanding of mechanical systems, such as valves, load banks, and dynamometers.
• Ability to write Facility Control Software, solving software communication issues, designing HUE driven user screens and reducing maintenance costs through effective software architecture.
• Experience with 3-phase power and its distribution in a test facility.
• Ability to manage time, supplies, personnel, and budget to meet challenging deadlines.
• Skilled at creating accurate cost estimates and schedules for test system designs.
• Willing to work with vendors to size and select hardware.
• A skilled leader, a great listener, and someone who exercises creative thinking when designing new systems or applying innovative methods to repair existing ones.

PREFERRED SKILLS:
• Experience in the Aerospace Industry mechanical testing environment with oversight responsibilities.

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-18 months
Start Date: ASAP
Input Date: 07/30/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Email: RTC-TalentMgmt@Real-Time-Consulting.com
Website: www.real-time-consulting.com

Electrical Engineer, Completions

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
• Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
• Catia V5 experiences a preference.
• 14 CFR 25 Subpart H - EWIS based design experience a must.
• Completions electrical system design experience preferred.
• Part 25 Certification experience for cabin interiors preferred.
• Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
• Experience with power distribution, lighting, switching, and harness routing required.
• Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
• Familiarity with aircraft STC procedures preferred.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly
• Makes technical decisions and provides recommendations demonstrating leadership authority.
• Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements
• Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements
• Develops standards and guides for diverse engineering activities
• Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
 
Job Number: 24-488
Job Location: Savannah, GA
Rate: $70/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/02/2021
Last Updated: 07/21/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Test Facility

Description:
ABOUT THE JOB:
This position is part of a team that supports testing highly complex turbine engine products. The Electrical Technician is responsible for fabricating, maintaining, and testing electrical systems and components to support the development and certification of gas turbine aircraft propulsion engines.

REQUIRED SKILLS:
• Associate in Science degree in Electrical Technology or equivalent experience.
• Minimum 7 years of Electrical Technician experience.
• Ability to read and interpret electrical drawings.
• Experience working from layout drawings, wire lists and schematics.
• Experience with fitout from utility and control system drops to motors, pumps, actuators, etc.
• Experience with 3-phase power and its distribution in a test facility.
• Experience in testing, troubleshooting and repairing electrical equipment.
• Experience with ordering components used in fabrication of wire harnesses, interface (Bud) boxes, etc.
• Experience fabricating wire harnesses.
• Experience installing wire harnesses for wiring control systems / PLCs to peripheral devices such as temperature sensors, speed sensors, actuators, etc.
• Experience fabricating interface boxes for signal breakout, signal interconnection, etc.

PREFERRED SKILLS:
• Experience in the Aerospace Industry mechanical testing environment.
• Experience with AutoCad or AutoCad Electrical.
• An understanding of mechanical systems, such as valves, load banks, and dynamometers.

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-18 months
Start Date: ASAP
Input Date: 05/27/2021
Last Updated: 06/09/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Packaging Engineer - Level 3 / Level 4

Description:
Inconen is looking for an Electro-Mechanical Packaging Engineer - Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **

Duties:
-Perform engineering design tasks related to the design of complex space electronics and electrical cables/harnesses for application in demanding mission environments and electrical test equipment.
-Design duties include electronics packaging of complex space electronics, electrical cables/harnesses, and electrical test equipment, definition of electrical mechanical interfaces, capture designs in CREO for release in Windchill, prepare and present relevant designs at design reviews, and to fully participate in a multifunctional team development environment.

Skills:
-Experience with CREO and Windchill a plus.

Education:
-Requires a Bachelor’s degree in Mechanical/Aerospace Engineering and at least 5 years of direct experience with packaging space/power electronics for application in harsh environments including space, or an equivalent combination of education and experience.
 
Job Number: 15378
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/01/2021
Last Updated: 06/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Embedded Software Engineer

Description:
PDS is seeking an Embedded Software Engineer for an open position in Ft. Worth, TX

The 429 Embedded Software Engineer will be responsible for (but not limited to) the following:
  • Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
  • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
  • Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
  • Develop and update requirements and verification traceability
  • Conduct software integration and testing on target hardware
  • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
  • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
  • Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements: 
  • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred.  Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
  • Master’s Degree in the Engineering disciplines mentioned above is suggested

 Position Requirements: 

  • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
  • Experience with DO-178 Level A software or other embedded software development and testing is required.
  • Experience with Flight Controls Computer Software.
  • Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
  • Experience with Primary Development Environment:
    • MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
    • C/C++ code
    • C# test scripts
    • Serena Dimensions / PVCS
    • Git
    • Embedded Software Development environments


 
Job Number: 2010119389
Job Location: Fort Worth, TX
Per Diem: No
Duration: 12 months
Input Date: 05/25/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P8RqQAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Major Defense Contractor is seeking an experienced self-motivated cation: Fort Worth, TX (76118)

12 month contractEmbedded Controls Software Engineer. The embedded controls software role will integrate with technology and vehicle platform development teams with focus on the propulsion systems. The emerging concept vehicles provide opportunities for flight controls software engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a diverse team of engineers capable of executing in a challenging and fast-paced environment.

Develop embedded DO-178 software for Flight Control System (FCS) with complex hardware.
Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks MATLAB & SIMULINK toolsets
Develop and update requirements and verification traceability
Conduct software integration and testing on target hardware
Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
Perform LLT and HLT execution on desktop environment and target electronic hardware integrated with real sensors and actuators in a lab environment
Development and implementation of safety critical primary control software in both ‘bare metal’ main executives and real time operating systems environments.
Design and implementation of real time embedded control functionality including in-line monitoring, redundancy management and start/periodic built-in test [S/PBIT].
Design and test of Flight Control Systems (FCS) with embedded DO-178 software and DO-254 complex hardware, including Fly-By-Wire Flight Control Systems
System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing in desktop simulation environment and systems integration labs, aircraft flight test, and aircraft/system qualification and certification

Education Requirements
Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Electrical Engineering, Computer Science Engineering required. Other technical degrees may be considered with relevant work experience.


Position Requirements

Experience at all levels will be considered with a minimum of 5 years specific experience with embedded control software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.

Familiarity with relevant standards, for example: RTCA DO-160, MIL-STD-810, RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems.
Software version control
Programming in C/C++
Embedded environments
HW initialization and synchronization,
MathWorks MATLAB/Simulink Embedded coder considered a plus

Communication Standards
ARINC 429
RS232/422/485
Familiarity with model-based systems engineering
Experience with creation of system specifications, requirements traceability, and verification
Development and implementation of safety critical primary control software in both ‘bare metal’ main executives and real time operating systems environments.
Design and implementation of real time embedded control functionality including in-line monitoring, redundancy management and start/periodic built-in test [S/PBIT].

Please send resumes to Becky at bnorman@butler.com. The phone number is 469-785-4744. (Please do not call the 203 number.)

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61110
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: June 2021
Input Date: 06/02/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Eng. Contractor 3: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15036
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 07/30/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Eng. Contractor 4: Electrical Engineer, Completions

Description:
Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
1) Catia V5 experiences a preference.
2) 14 CFR 25 Subpart H - EWIS based design experience a must.
3) Completions electrical system design experience preferred.
4) Part 25 Certification experience for cabin interiors preferred.
5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6) Experience with power distribution, lighting, switching, and harness routing required.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.
9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
10) Makes technical decisions and provides recommendations demonstrating leadership authority.
11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
13) Develops standards and guides for diverse engineering activities.
14) Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12828
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 07/30/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Eng. Contractor 4: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15037
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 07/30/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer I- Job ID 46276

Description:
We have an Excellent Contract position for an Engineering Designer to join a leading Company located in the Walled Lake, MI area.

Develops designs for electronic, electro-mechanical, or mechanical equipment.
Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal.
Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures.
Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Receives assignments in the form of objectives and establishes goals to meet objectives. Work is reviewed and measured based on meeting objectives and schedules.
Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Exercises independent judgment within defined procedures and practices to determine appropriate action.
Contributes to the implementation of the organization's goals and objectives. Decisions or failure to achieve results may cause delays in schedules.
May interact with outside customers and functional peer groups.
Interaction normally involves the exchange or presentation of factual information.
Receives no instruction on routine work, specific instructions on new assignments. May provide guidance to other personnel.
Applies the basic fundamentals, concepts, practices, and procedures to acquire the knowledge and experience to become proficient in the job.
Complex choice of action requires considerable logic, knowledge, and understanding in order to find out the cause, analyze the problem and determine which course of action to take.

TYPICAL EDUCATION AND EXPERIENCE:
High school education or equivalent and 3+ years related experience.
 
Job Number: 46276
Job Location: Walled Lake, MI
Rate: 29.50
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 06/10/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer II- Job ID 46273

Description:
We have an Excellent Contract position for an Engineering Designer to join a leading Company located in the Walled Lake, MI area.

Job Responsibilities:
Develops designs for electronic, electro-mechanical, or mechanical equipment.
Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal.
Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures.
Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Receives assignments in the form of objectives and establishes goals to meet objectives. Work is reviewed and measured based on meeting objectives and schedules.
Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Exercises independent judgment within defined procedures and practices to determine appropriate action.
Contributes to the implementation of organization's goals and objectives. Decisions or failure to achieve results may cause delays in schedules.
May interact with outside customers and functional peer groups.
Interaction normally involves exchange or presentation of factual information.
Receives no instruction on routine work, specific instructions on new assignments. May provide guidance to other personnel.
Applies the basic fundamental, concepts, practices, and procedures to acquire the knowledge and experience to become proficient in the job.
Complex choice of action which requires considerable logic, knowledge, and understanding in order to find out the cause, analyze the problem and determine which course of action to take.

Basic Hiring Criteria:
Bachelor's degree or equivalent and 2+ years related experience.
 
Job Number: 46273
Job Location: Walled Lake, Mi
Rate: 29.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 06/10/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer III- Job ID 46275

Description:
We have an Excellent Contract position for an Engineering Designer to join a leading Company located in the Walled Lake, MI area.

Develops designs for electronic, electro-mechanical, or mechanical equipment.
Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal.
Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures.
Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Receives assignments in the form of objectives and establishes goals to meet objectives. Work is reviewed and measured based on meeting objectives and schedules.
Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Exercises independent judgment within defined procedures and practices to determine appropriate action.
Contributes to the implementation of the organization's goals and objectives. Decisions or failure to achieve results may cause delays in schedules.
May interact with outside customers and functional peer groups.
Interaction normally involves the exchange or presentation of factual information.
Receives no instruction on routine work, specific instructions on new assignments. May provide guidance to other personnel.
Applies the basic fundamentals, concepts, practices, and procedures to acquire the knowledge and experience to become proficient in the job.
Complex choice of action requires considerable logic, knowledge, and understanding in order to find out the cause, analyze the problem and determine which course of action to take.

TYPICAL EDUCATION AND EXPERIENCE:
Bachelor's degree or equivalent and 6+ years related experience.
 
Job Number: 46275
Job Location: Walled Lake, MI
Rate: 29.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 06/10/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Manager - Aerospace- Seattle, WA area -1601

Description:
Manager of Engineering - Aerospace- Seattle, WA area

Our client in the Seattle, WA area is a leading aerospace repair and service company specializing in windows, avionics and instruments who are looking for a Manager of Engineering responsible for providing support for their Company. This individual will develop, maintain and effectively execute development and R&D project plans in accordance with the company's strategic plan and will be responsible for production programs sustaining engineering.

Keltia Design is a technical support services company providing Engineering Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace and other industries in WA State, around the US, Canada and Europe. We have been in business 20 years in the US and 8 years in Europe.

Job Types: Full-time, Contract and Permanent Positions

Responsibilities:
This individual must have a thorough understanding of the aircraft materials and structures markets and be familiar with suppliers, customers and OEWs in the Air Transport/RegionaI markets. Additional experience in General Aviation would be a plus.
• Supervise and lead engineers and/or technicians who design repairs for cockpit window structures and transparencies
• Coordinate engineering activities with manufacturing, quality, sales and marketing, and other groups within the Company, consistent with the Company's strategic goals.
• Coordinate and direct projects, making detailed plans to accomplish goals and direct the integration of technical activities.
• Monitor production for trends and implement lasting corrective actions.
• Oversee the research and development of new products and procedures.
• Hire, train, and mentor other engineers and supporting staff.
• Assign, direct, and evaluate the engineering team's work; and oversee the development and maintenance of the team's competence.
• Perform administrative functions such as reviewing and writing reports, enforcing rules, and making recommendations about the purchase of materials or services
• Consult with customers to prepare project specifications.
• Present and explain proposals, reports, and findings to management, production, marketing and customers
• Make detailed plans to accomplish goals.
• Analyze market demand and available resources.
• Review, approve, or modify product designs.
• Prepare budgets, bids, contracts, approve expenditures.
• Draft proposals and reports for clients.
• Improve manufacturing processes.
• Develop overall concepts for a new product.
• Check technical accuracy of work.
• Establish administrative policies, procedures, and standards.
• Confer with management, production, and marketing staff to discuss project specifications and procedures.
• Support the Company by developing department metrics, analyze, and implement actions to improve processes.
• Analyze technology and resource needs to plan and assess the feasibility of projects.
• Direct, review, and approve product designs and changes.
• Develop and implement policies, standards and procedures for the engineering and technical work performed
Experience:

• BS in Aeronautical Engineering, Mechanical Engineering, or a related engineering discipline. Advanced degree preferred.
• Minimum Of 5 years engineering experience in the Aerospace MRO industry
• Extensive experience with FAA certification programs, preferably involving aircraft structures.
• B.S. degree Industrial Engineering, Mechanical, Chemical, Electrical, Aeronautical or equivalent work experience.
• Prefer Six Sigma Black Belt or equivalent certification
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible. This is an FAA Safety Sensitive position.

If interested, please send your updated resume in Word doc format to Jason at jr@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.b
 
Job Number: JRR-1601 05/21
Input Date: 05/30/2021
Firm Name: KELTIA DESIGN INC
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Engineering Quality Assurance

Description:
PDS Tech is seeking an Engineering Quality Assurance Associate in Kinston, NC-

Duties:
  • Develops processes, systems, and equipment that ensure the quality, reliability, and system safety of company or procured products and services.
  • Provides quality system design and analysis review to validate the integrity of quality decisions that affect products and services
  • Analyzes contractual, product definition, and specification requirements for the development or modification of methods, procedures, and metrics needed to ensure that quality standards and practices are attained.
  • Analyzes and provides material review dispositions for nonconforming materials, parts, and equipment.
  • Performs scientific evaluations and analyses and processes audits.
  • Tests and approves products, processes, equipment, and measurement systems.
  • Ensures that resulting processes provide for configuration management. Participates in design and product reviews to ensure that producibility, inspectability, reliability, safety, Quality System integrity, and business process management objectives are met.
  • Performs such research as benchmarking to industry standards; analyzes and compiles performance reports and process control statistics in order to determine and improve process capability or product quality.
  • Performs root cause analyses.
  • Recommends and supports the implementation of corrective actions that are necessary to reduce or eliminate nonconformance to design specifications.
  • Interfaces with company employees, suppliers, customers, and regulatory agencies to ensure compliance with contractual, company, and regulatory requirements.
  • Develops and uses statistical methodologies to ensure that specified levels of safety, reliability, and process capability are achieved, maintained, or improved.
  • Define process flow, performs PFMEA & Control plan
  • Ability to put all PPAP documents together & submit to customer for approval
  • Ability to perform Gage R&R, SPC, Cp / CPk
  • Ability to implement a Quality Management System for a new program

Requirements:



  • Bachelor's of Science in Aerospace, Mechanical, Industrial Engineering or other related course of study from an ABET accredited University
  • Minimum 5+ years of experience required 



Preferred Qualifications:


  • Experience with RCCA (root cause/corrective action) / 8D Methodology
  • Proficiency with Microsoft Office (mainly Word, Excel & PowerPoint)
  • Proficiency with PFMEA, Control plan, & PPAP
  • Ability to travel to customers & suppliers, as needed

 
Job Number: 2110131568
Job Location: Kinston, NC
Per Diem: No
Duration: 6 months
Input Date: 05/24/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pn41QAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible for using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure systems and components meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience.

Engineering Technician III Job duties:
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
* Completes parts lists, checks drawings in accordance with released engineering
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
* Assists as required during inspection verification or modification/maintenance procedures
* Has experience in fabrication work including metal, aluminum, composite and plastics
* Has basic knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Understands the use of basic measuring tools (calipers, micrometers, height gages)
* Proficient in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions


Qualifications:
* Associate's degree in a related field of study and at least 4 years of relevant experience
* A higher level degree may substitute for experience
* Related experience may be considered in lieu of required education
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools


If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




 
Job Number: 310327
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/10/2021
Last Updated: 06/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible for using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure systems and components meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience.

Engineering Technician III Job duties:
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
* Completes parts lists, checks drawings in accordance with released engineering
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
* Assists as required during inspection verification or modification/maintenance procedures
* Has experience in fabrication work including metal, aluminum, composite and plastics
* Has basic knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Understands the use of basic measuring tools (calipers, micrometers, height gages)
* Proficient in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions


Qualifications:
* Associate's degree in a related field of study and at least 4 years of relevant experience
* A higher level degree may substitute for experience
* Related experience may be considered in lieu of required education
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools


If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




 
Job Number: 310539
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/16/2021
Last Updated: 06/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible for using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure systems and components meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience.

Engineering Technician III Job duties:
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
* Completes parts lists, checks drawings in accordance with released engineering
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
* Assists as required during inspection verification or modification/maintenance procedures
* Has experience in fabrication work including metal, aluminum, composite and plastics
* Has basic knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Understands the use of basic measuring tools (calipers, micrometers, height gages)
* Proficient in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions


Qualifications:
* Associate's degree in a related field of study and at least 4 years of relevant experience
* A higher level degree may substitute for experience
* Related experience may be considered in lieu of required education
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools


If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




 
Job Number: 310540
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/16/2021
Last Updated: 06/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician IV

Description:
An Engineering Technician IV job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible for performing a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 6 years of relevant experience.

Engineering Technician IV Job duties:
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
* Completes parts lists, checks drawings in accordance with released engineering
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
* Assists as required during inspection verification or modification/maintenance procedures
* Has experience in fabrication work including metal, aluminum, composite and plastics
* Has basic knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Understands the use of basic measuring tools (calipers, micrometers, height gages)
* Proficient in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions

Qualifications:
* Associate's degree in a related field of study and 6 or more years of experience
* A higher level degree may substitute for experience
* Related experience may be considered in lieu of required education
* Ability to understand and interpret moderately complex technical schematics, diagrams, blueprints, manuals and/or publications
* Thorough understanding of the use of standard laboratory test equipment, spectrum analyzers, network analyzers, Oscilloscope, Pitot static equipment, other measurement equipment, hand tools, and power tools
* Advanced skills with assembly, connectors and crimping techniques

Pay Rate: Up to $32/hr DOE

If you are interested in this Engineering Technician IV job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




 
Job Number: 310326
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/10/2021
Last Updated: 07/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Environmental Validation Engineer

Description:
PDS Tech Inc., is seeking an Environmental Validation Engineer in Troy, MI

Overview:
Responsible for Environmental Validation activities from RFQ to final customer’s acceptation.
The Environmental Validation Engineer leads the environmental test activities according to the company’s rules and international standards.

Responsibilities:
  • Responsible for determining the scope and needs of Environmental tests.
  • Responsible to book resources (Chambers, external l ab)
  • Realize the test (electrical, mechanical, environmental, reliability) in the standard time and in line with the instruction sheet (test specification) and according to projects and customer’s milestones.
  • Defines environmental test cases according to requirements and Environmental test standards.
  • Develops, maintains and drives Environmental Test Plan and Environmental Test Specification to approval.
  • Prepare and review of the environmental test reports.
  • Explains and discusses the environmental test results with the project team and customers.
  • Reports status and problems to the Project team, R&D PTM, and other Metiers.
  • Prepares FVS (Fixe, Variable, Specific) check from Environmental Validation perspective.
  • Performs Environmental Validation risk analysis.
  • Maintain up to date Dashboard and Environmental Tool calendar.
  • Provide work instruction to test houses to enable efficient transfer of test equipment.
  • Contribute to product problems solving, support 5W2H / PDCA.
  • Contribute to the improvement of the laboratory’s tools such as: Instruction sheets, logs, development and validation tools.
  • Improve test efficiency
  • Carry out all work to comply with Quality Management System and Validation Engineering Processes e.g. ASPICE, ISO/IATF16949.
  • Coordinate logistics of test racks from and company’s local laboratory and other laboratories worldwide.
  • Track all equipment sent off site with Tracking number to be kept on file.


 
Qualifications:
  • Bachelor’s in computer science, electrical or mechanical engineering.
  • Min. 2 years’ experience and knowledge of test & validation methods in the automotive industry
  • Knowledge of automotive electronics systems
  • Proficient with MS Office / Google Suite.
  • Basic knowledge in National Instruments LabVIEW and TestStand software - Certified LabVIEW
  • Basic knowledge instrumentation interfacing over PXI, PCI, USB, RS232 & GPIB
  • Basic knowledge in hardware and peripherals
  • Ability to read, analyze and interpret complex documents /schematics.
  • Basic knowledge of automotive electronics systems
  • Validation experience with knowledge of test & validation methods
  • Basic knowledge of accelerated life testing
  • Basic knowledge of IATF 16949


 
 
Job Number: 2110124764
Job Location: Troy, MI
Duration: 12 months
Input Date: 05/24/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PT3rQAG&URLSource=cjhunter

Experienced Aircraft Mechanical Test Engineer (Remote position)

Description:
PDS Tech is seeking a Remote Experienced Aircraft Mechanical Test Engineer(Position will start off remotely and then transition on-site in Stratford CT)

The ideal candidate will be responsible for specific discrete tasks covering all aspects of ground testing helicopter components and systems.

This position requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

Main tasks include:
  • Support and management of bench testing including support of supplier testing as well as in-house component laboratory tests to validate component designs;
  • Writing and reviewing technical documents for development and qualification requirements, procedures and test results;
  • Review of supplier qualification plans, procedures, reports and drawings.


Requirements

  • 5 years minimum experience with component bench testing is a plus
  • Background with qualification to MIL-STD-810 and RTCA-DO-160 requirements


Tasks include:

  • Detailed test planning,
  • Coordination with internal and external customers,
  • Test conduct,
  • Use of computer data analysis tools, and
  • Generation of test plans and reports.


Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.  This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, and mission equipment.  Tasks also include the development and implementation of test procedures used to validate proper installation of aircraft systems and components during final assembly, and supporting and establishing operating limitations for both flight test programs and fielded aircraft

 
Job Number: 2110126208
Job Location: Stratford, CT
Duration: 12 months
Input Date: 03/08/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PXYMQA4&URLSource=cjhunter

F5 Engineering Ground Test Laboratory Technician

Description:
PDS Tech is seeking 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

The Lab technician must:
  • Be capable of working from engineering drawings
  • with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Be able to work from elevated work platforms at various heights.
  • Be willing and able to work in inclement weather.
  • Be capable and comfortable working within a diverse team environment.
    Possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2110131544
Job Location: Stratford, CT
Duration: 15 months
Input Date: 05/21/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmxJQAS&URLSource=cjhunter

F5 Engineering Ground Test Laboratory Technician - 1st Shift

Description:
PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

The ideal candidate will be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.
  • Must possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2010121878
Job Location: Stratford, CT
Per Diem: No
Duration: 15 months
Input Date: 11/24/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PFWkQAO&URLSource=cjhunter

FAA Assembly Mechanic

Description:
PDS Tech, Inc. is seeking an FAA Assembly Mechanic, in Phoenix, AZ.

Description:

•    Constructs, maintains, and tests mechanical equipment, machinery, and components.
•    Identifies parts for replacement and machines that need new parts and places orders as necessary.
•    Requires a high school diploma or its equivalent.
•    May be required to complete an apprenticeship and/or formal training in area of specialty.
•    May require 2-4 years of experience in the field or in a related area.
•    Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
•    Relies on instructions and pre-established guidelines to perform the functions of the job.
•    Works under immediate supervision.
•    Primary job functions do not typically require exercising independent judgment.
•    Typically reports to a supervisor or manager.

Requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.

 
Job Number: 2110131308
Job Location: Memphis, TN
Duration: 5 months
Input Date: 05/06/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Ramon Quintana
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmM9QAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Maintenance Technician

Description:
A Facilities Maintenance Technician job in Cedar Park, Texas is currently available through Belcan with one of our Manufacturing clients. You will be responsible for carrying out all facility maintenance duties to keep facility up and running. To be considered for this role, you will need three plus of experience in Facilities Maintenance position. High School Diploma or GED is required.

Facilities Maintenance Technician Job duties:
* Troubleshoot, diagnose, and repair equipment and facilities. Equipment will include: ◦Electrical equipment including facility wiring, generators, sub panels, junction boxes.
* Mechanical equipment including cranes, doors, plumbing, HVAC systems, compressors
* Provide training to customers (and co-workers) in relation to proper operation, preventative maintenance, and fault finding of company equipment
* May also perform complex duties which include planning and implementation for programmed facilities plans and general maintenance.
* Carry out cleaning and general maintenance responsibilities, including, but not limited to major machine repairs and equipment inspections.

Qualifications:
* 3+ years of experience in HVAC diagnostic and repairs.
* High School Diploma or GED required.
* Basic electrical 120V to 480V and basic math knowledge.
* Must be able to lift to 40 lbs.
* Read and interpret blueprints and other specifications.
* Use of hand tools, power tools, and precision-measuring instruments.

If you are interested in this Facilities Maintenance Technician job in Cedar Park, TX, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 310286
Job Location: Cedar Park, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 03/09/2021
Last Updated: 06/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Flight Controls Technician

Description:
Chipton-Ross is seeking 8 Flight Control Technicians

JOB SUMMARY:
Responsible for mechanical maintenance (preservation, repair, inspection, overhaul, replacement of parts) on Commercial aircraft types in strict adherence to instructions provided in appropriate technical documentation.

ESSENTIAL RESPONSIBILITIES:

1. Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor's directives and manuals to complete all routine and non-routine assignments in a timely manner.

2. Operationally check, test, rig and adjust aircraft flight control systems to ensure functionality to manufacturer's specifications.

3. Support training activities within the crew including assisting and providing on the job training to lesser skilled mechanics.

4. Maintain and store various tools in a serviceable condition.

5.Adhere to safe maintenance practices and keep a clean work area.

6. Maintain and supply personal records of work performed on OJT forms for the Training Department.

7. Successfully complete any courses deemed necessary by the Training Department.

8.Perform any work that may be assigned by his or her supervisor.

WORKING ENVIRONMENT:

SUPERVISION: Under general direction. Normally performs duties after receiving general instructions as to methods, procedures, and desired end results. Some opportunity for discretion when making selections among a few, easily identifiable choices. Assignment is usually reviewed upon completion.

INTERPERSONAL RELATIONS: A moderate level of interpersonal skills is required to maintain an effective relationship with co-workers and supervision.

PHYSICAL ENVIRONMENT: Requires easy mobility around various sections of aircraft and
the dexterity to remove and replace parts in a timely manner. Requires mental skills and quickness with the ability to cope with stress and intense effort or exertion usually caused by long working hours. Must have the capacity to gain knowledge by hearing for one's own safety due to the dangers involved. Working environment requires standing 90% of the workday on hard surfaces. Must be able to lift 50lbs. and report to work regularly.

OWNERSHIP OF TOOLS: Must possess a toolbox containing the minimum tools required for APG mechanics.

JOB QUALIFICATIONS:

EDUCATION: High school diploma or GED required. A&P License desired or specialized training.
EXPERIENCE: Minimum of 5 years preferred in heavy commercial maintenance.

PREFERRED EXPERIENCE: Flight Controls experience with MD11's, however any aircraft will suffice.

 
Job Number: 188680
Job Location: San Antonio, TX
Rate: $27 to $30.00 DOE
Duration: 6 Months
Input Date: 01/04/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Dan Mulvihill
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmulvihill@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Seeking Flight Test Engineer for long term contract in Savannah, GA
Skills:
Test experience supporting aircraft propulsion or aircraft mechanical systems. Email resume and then call Peggy at 774-210-4108.
 
Job Number: Flight Test PL
Job Location: Savannah, GA
Rate: $75-77/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2 weeks
Input Date: 12/16/2020
Last Updated: 07/07/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Lundie
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
 
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
 
The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
 
They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
 
They will:
  • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
  • Support and manipulate Microsoft based tools in support of project schedule and status.
  • Communicate with other program integrated product teams.
  • Compile and analyze performance reports.


.
The ideal candidate will have:
  • Superior business and data skills,
  • Knowledge of IMS based project management and can work in a team environment.
  • Understanding of Aerospace, Helicopter and / or development program experience
  • Knowledge of mechanical / structural design and test

 
Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
 
 
Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Keith Zingler
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Design Engineer - Level 2/3 - Level 3/4

Description:
Inconen is looking for a Harness Design Engineer - Level 2/3 - Level 3/4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Pay Range: Level 2/3 = $50.00 - $60.00/HR / Level 3/4 = $70.00 - $80.00/HR
Job Type: 3 Month Contract
Schedule:9/80

** Candidates must be U.S. Citizens without Dual Citizenship **

Duties:
-Support Electro-Mechanical Packaging of wiring harnesses and generate appropriate CAD models and design drawings as required.
-Experience in design of STE cables and harnesses for Aerospace and Defense products applications.
-Proficiency in use of Creo PDM/Link and Windchill required.
-Additional proficiency with GD&T and tolerance analysis preferred.

Skills:
-Prior experience and detailed knowledge of Windchill PDMLink 10.1 (or greater)
-Previous experience with Lifecycle Management workflow, MODELCHECK, product structure, etc., preferred
-Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
-Mechanism Design/Constraints
-Advanced part modeling techniques including the use of relations, analysis features, and flexible -components
-Top-Down Design using Reference Skeletons including Copy Geometry, Publish Geometry, Relative Datums and Shrink-wraps - Preferred

Preferred Experience with Creo Cabling application including:
-Utilizing logical reference data (automated Network routing using neutral wire format)
-Harness flattening using Creo Harness-MFG extension
-Preferred Working knowledge of Creo Schematics 2.0 (or greater) desired including:
-Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
-Schematics creation utilizing a Central Catalog

Education:
-BSME or equivalent with 10 years of experience or 15 + years of equivalent experience – L3/L4
-BSME or equivalent with 5 years of experience or 8 + years of equivalent experience – L2/L3
 
Job Number: 15237
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 05/06/2021
Last Updated: 07/13/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Hot Stamp Operator

Description:
As a Hot Stamp Operator, you'll be trained how to operate each machine utilized in production of insert chip technology secured cards. You will be responsible for the set up and operation of the machines and will program computer batches from an order ticket to load data. In this role you will perform quality checks, confirm quantity produced, and ensure the batch is correct per the job ticket. A great machine operator is reliable and able to work with attention to detail and safety standards. The overall goal of this role is to ensure that production procedures are carried out smoothly to maximize efficiency.

In this role, you will perform the following duties:
o Set up machines (calibration, cleaning etc.) to start a production cycle.
o Control and adjust machine settings, according to the job ticket.
o Feed raw material or parts to semi-automated machines.
o Inspect parts with precision and measuring tools.
o Test operation of machines periodically.
o Resolve machine errors and issues that might occur while operating.
o Maintain activity logs related to daily secured card production.
 
Basic qualifications for consideration:
o High School Diploma or equivalent is preferred but is not required.
o Experience in a fast paced, high volume production environment and understanding of production concepts.
o Strong mechanical aptitude.
o Deep knowledge of production operation.
o Experience operating a computer workstation.
o Ability to work overtime including Holidays and weekends during peak periods.
o Flexibility with working in other areas on occasion.
o Strong ability to multi-task.
o Ability to work with associates with collaboration related to productivity, safety and quality of work.

Physical Requirements:
o Be able, as it is necessary-to climb, stretch, crouch or kneel.
o Successful performance requires good vision including close vision for accurate attention to detail.
o Work requires incumbent to be mobile and in a standing / walking position.
o Ability to lift up to 50 lbs regularly.
o Uses hands to handle, finger, or feel objects and to perform keyboarding.
 
 
Job Number: 2010115285
Job Location: Nashville, TN
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou0wQAC&URLSource=cjhunter

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 2110132001
Job Location: Hollister, CA
Duration: 0 months
Input Date: 05/27/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PoGmQAK&URLSource=cjhunter

In process Inspector

Description:
PDS Tech is currently recruiting for an In Process Inspector in the Hollister, CA area.  

This role has potential for overtime and pay differential for 2nd shift.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 2010119109
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7YSQA0&URLSource=cjhunter

InProcess Inspector

Description:
PDS Tech is currently seeking InProcess Inspectors for Hollister, CA
 

Description:  


This position requires the ability to perform limited visual, mechanical and electrical inspection functions in manufacturing areas under minimum supervision.  The individual must be dedicated to the quality function and a drive to enhance the quality of both the product and processes. 
 
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a lower level technical nature with record keeping as a major part of the duties.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a "go/no-go" nature.
  • Interpret basic drawings and instructions.
  • Uses a variety of precision measuring instruments.
  • Other functions that may be assigned.

 
  • High School Diploma,  college-level business courses a plus
  • Knowledge in the use of basic mechanical measuring tools
  • Ability to interpret basic drawings and instructions
  • Basic computer skills, MS Office knowledge
  • Good problem solving skills
  • Good written, verbal, mathematical and analytical skills
  • United States Citizen  

 
Job Number: 2110131997
Job Location: Hollister, CA
Duration: 3 months
Input Date: 05/25/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PoGNQA0&URLSource=cjhunter

Industrial Engineer

Description:

As an Industrial Engineer you will be supporting the manufacturing team by managing the daily production schedule, level loading work packages, and supporting daily manufacturing activities. You will work across multiple areas of manufacturing engineering planning, including structures, mechanisms / mechanical, electrical systems and tooling.

Responsibilities:



  • Monitor and manage production scheduling and level loading work packages
  • Will be responsible for managing on-site supplier/vendor schedules and activities
  • Responsible for communicating major supply chain issues to manufacturing from Supply Chain
  • Applies knowledge of product design, fabrication, assembly, tooling, and materials
  • Validate and ensure production readiness of design/build solutions, assembly processes, tooling and required materials.
  • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements
  • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout
  • Provide producibility analysis and recommend design/build concepts for inclusion in facilities and manufacturing planning
  • Develops daily KPI metrics that help drive the company goals.

 
Requirements:
  • Bachelor’s degree preferred
  • 5 plus years of experience preferred
  • Ability to thrive in a dynamic fast-paced company
  • Excellent interpersonal verbal and written communication skills.
  • Experience with Determinant Assembly (DA) implementation
  • Experience working with 3D models such as CATIA and Solid works is a plus
  • Experience in development and implementation of process efficiencies, design for assembly opportunities, and incorporation of engineering changes.
  • Strong problem-solving skills, the ability to be resourceful, and the ability to exercise creative thinking
  •  International work experience is a plus

 
Job Number: 2110130934
Job Location: Arlington, WA
Duration: 6 months
Input Date: 05/13/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PlN2QAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
General Summary:

The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:
1. Leading process optimization efforts to address specific business requirements and to eliminate waste from HACI assembly processes.

2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.

3. Implementing productivity improvements.

4. Working with cross functional teams to develop best practice solutions.

5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.

6. Implementing mistake-proofing controls to maintain or improve process quality.

7. Conducting root cause analyses to address specific process or quality problems.

8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.

9. Performing Time Studies to understand processes and performance metrics.

10. Documenting processes using process mapping and value stream mapping.

11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.

12. Designing facility layout alternatives.



Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
CATIA and AutoCAD experience is a plus.
Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
Strong analytical skills coupled with a creative and open mind towards alternative methods.

Knowledge, Skills and Abilities:
Strong analytical and innovative skills.
Strong work ethic.
Ability to multitask.
Ability to work under minimal supervision.
Detail oriented.
Excellent problem solving skills.
Ability to read and interpret engineering drawing and/or specification requirements.
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.


The Structures Company LLC is an AA/EOE.
 
Job Number: 480
Job Location: Greensboro, NC
Rate: $50/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year+
Start Date: 4-6 Weeks
Input Date: 06/02/2021
Last Updated: 06/21/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Instrumentation Technician

Description:
PDS is seeking an Experimental Instrumentation Technician for an open position in Wichita, KS.

Candidates will be responsible for carrying out Instrumentation DAS (data acquisition system) installation and troubleshooting duties on experimental aircraft. Candidates will be required to perform these duties in support of new product and sustaining aircraft designs. These duties will include coordination with other Engineering and technical groups to help develop, implement, monitor and status assignments.
Responsibilities:
• Candidate will plan and perform the work involved in the installation, calibration, and troubleshooting of instrumentation systems required for data acquisition on experimental aircraft.
• Candidate will be utilizing various types of specialized test equipment to troubleshoot data acquisition systems on aircraft.
• Candidate will be working independently and be responsible for good decision making.
• Candidate will be working with all aspects of experimental aircraft design and will be required to frequently interact with engineering personnel

 
 

Experience: Any of these will work

• Basic Instrumentation knowledge

• Military aircraft electrical

• On Aircraft avionics skills

Education and Requirements:
A.A.S. or certificate, preferably in Electronics.
• Comprehensive training and fundamental skills for hands-on electrical/mechanical troubleshooting of aircraft systems.
• Ability to utilize computers, to create and modify data acquisition software.
• Knowledge of PCM (Pulse Coded Modulation) based data acquisition system layout and design.
• Ability to deal with change and work in a dynamic environment.
• Excellent written and verbal communication skills are required.

 

 
Job Number: 2110124271
Job Location: Wichita, KS
Duration: 12 months
Input Date: 04/08/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PREHQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Hydraulic Design - Aircraft Hydraulics - China

Description:
Integrated  Hydraulic Design - Aircraft Hydraulics - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Integrated Aircraft Hydraulics Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Experience in designing mechanical products and components, including bolt, hinge, door mechanism, lock, valve, pump and actuators.
  • Working experience in international well-known Hydraulics Companies, institutions or universities, doctoral degree is preferred.
  • Preferred working experience in civil aircraft OEM or related mainstream suppliers.
  • Good command of English listening, speaking, reading and writing.
   Role and Duties:
 
  • Coordinate with overall aerodynamics, performance stability, structure, flight crew control, pilot, electrical system, system strength, customer service, airline customer, manufacturing, airline operation, supplier management and aircraft safety and other related teams to develop world-class competitive mechanical and hydraulic system products.
  • Develop and confirm requirements and interface definitions.
  • Carry out detailed design of new products.
  • Conduct a variety of comprehensive analysis / simulation, using CAD system tools (e.g CATIA V5) and mathematical modelling tools (such as Simulink MATLAB and EASY5).
  • Verify the design and performance through product level, system level and aircraft level tests.
  • Participate in design review and supplier communication management.
  • Participate in airworthiness activities related to client products.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-346
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer

Description:
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

Integration Engineer 2 duties:

* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.

EDUCATION AND EXPERIENCE REQUIRED:

* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 309499
Job Location: Kirkland, WA 98034,
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/03/2021
Last Updated: 06/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Description

General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.


Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.


Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

The Structures Company LLC is an AA/EOE.
 
Job Number: 467
Job Location: Greensboro, NC
Rate: $60-$62/Hr.**DOE**
Per Diem: Yes
Overtime: Possible
Duration: 1+ Year
Start Date: 4-6 Weeks
Input Date: 05/11/2021
Last Updated: 07/30/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Lab Technician - Maintenance

Description:
Overview
Maintain, update laboratory equipment to insure continuous operation of laboratory testing.

Assist / Perform laboratory tests, including set-up, monitoring, measurement, data collection and reporting under guidance of lab Engineers in a test laboratory. 

Responsibilities
Laboratory maintenance and updates.

  • Organize the calibration of the Environment lab equipment.
  • Standardize the Test Bench set-up to facilitate usage and improve maintenance.
  • Create a controlled database for all the test benches, including B.O.M, Software rev level.
  • Work with Methods & Tools (M&T) team to develop test environment solutions to enable Design & Process Validation (DV/PV)
  • Contribute to the improvement of the laboratory’s tools such as: Instruction sheets, logs, development and validation tools, process automation.
  • Minimize test cycle times.
  • Input to work instructions for test houses to enable efficient transfer of test equipment
  • Support building and implementation of robust and efficient automated test benches


Laboratory testing

  • Realize the test (electrical, mechanical, environmental, reliability) in the standard time and in line with the instruction sheet (test specification)
  • In case of difficulty, try to solve it by him/or herself or with support if needed (team leader, validation dept manager, validation engineer, project team member…). Apply the QRQC methodology
  • Input into writing of the test report taking into account the real test conditions, use pictures for more comprehension.
  • Contribute to product problems solving, support 5W2H / PDCA.
  • Police parts logistics and correct archive the parts after test (bags, labels, boxes, pallets).
  • Coordinate planning for the planned testing and allocated resources (chambers, tools, benches,…).
  • Coordinate the specific tools needed for the validation (test specification and follow-up) whenever they are done inside or external of the company.
  • Carry out all work to comply with Quality Management System and Validation Engineering Processes e.g. ASPICE, ISO/IATF16949.
  • Execution of testing using lab equipment (using thermal chambers, IPx) as per test specification.
  • Safety focussed and dedicated to maintaining high quality standards.
  • Report testing status to the val engineer responsible on a regular basis (QRQC, 5mm…)
  • Contribute to test reports, peer-reviews of data and follow up
  • Participate in lessons learned across the various projects
  • Warranty parts traceability, storage and disposition.
  • Coordinate logistics of test racks from & to laboratory and other laboratories worldwide.
  • Track all equipment sent off site ie Tracking number to be kept on file.
  • Request RMA/DAT from Rio Bravo by provide product serial # and Qty
  • Ensure parts have identification label and Shipping data
  • Ensure all warranty information captured (VIN#, MY, Repair date, Build date, Causal part, 3C’s etc) in the tracker before shipping
  • Dispose (scrapped) the parts according to established retention time following internal and customer Procedures

Qualifications:
  • Min 5 years’ experience and knowledge of test & validation methods in the automotive industry
  • Knowledge of automotive electronics systems
  • Proficient with MS Office / Google Suite.


Nice to have

  • Basic knowledge in National Instruments LabVIEW and TestStand software - Certified LabVIEW
  • Basic knowledge instrumentation interfacing over PXI, PCI, USB, RS232 & GPIB
  • Basic knowledge in hardware and peripherals
  • Ability to read, analyze and interpret complex documents /schematics.
  • Basic knowledge of automotive electronics systems
  • Validation experience with knowledge of test & validation methods
  • Basic knowledge of accelerated life testing
  • Basic knowledge of IATF 16949
  • Spanish is a plus

 
Job Number: 2110131553
Job Location: Troy, MI
Duration: 24 months
Input Date: 05/24/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Melissa Cuellar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pn2jQAC&URLSource=cjhunter

Lead CNC Machinist-2nd shift

Description:
Lead CNC Machinist
Primary Objective: 
Supports production operations by performing moderate to difficult machining operations.  A CNC Machinist II operates various types of machine tools and performs progressive machining operations for metal parts, tools and machines with close tolerance and focus on high quality and accurate parts.  May suggest edits to the NC programmer in the course of making parts. 

Key Job Duties:   
Reads and interprets specific machining instructions from complex blueprints, part and machine drawings.
Must be able to set up all tooling, write and execute complex programs.
Sets up, operates and programs a broad range of production work involving close tolerance and set ups that are exacting that are somewhat involved and have moderate to high degree of difficulty.
Performs other secondary operations such as stamping part numbers and deburring during machine cycle times.
Inspects machine parts to ensure they meet proper size, shape, or tolerance specs using micrometers and other measuring tools and devices.
Performs routine maintenance.
Performs quality audits of completed work within the machine shop department.
Must be able to write programs without assistance.
Participates in and contributes to the lean manufacturing journey.
Assists in other areas and performs additional tasks as needed.
Position may transition to second shift
 
Requirements
High School Diploma or GED required
Technical Degree in Machine Tool Technology or related field preferred
Must be able to program, conversational, G-Code and run multiple machines (milling/lathe)
Must be good at problem solving, have good mechanical aptitude, and able to learn and understand job methods and instructions in a timely manner
5+ years of relevant machining experience desired
Excellent work history desired
Must be able to stand for long periods of time and regularly lift 50+ pounds on a regular basis
 
 
Job Number: 2110124670
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 04/12/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PSZlQAO&URLSource=cjhunter

Lead Propulsion Engineer - LOX-Methane focus 

Description:

Lead Propulsion Engineer - LOX-Methane focus 


Mojave, CA by August 15, 2021
Masten is growing a team of top-notch propulsion engineers. The Senior Propulsion Engineer role is responsible for developing new propulsion systems to meet mission requirements. This includes conceptual, design, manufacturing and test of propulsion components and systems.
Responsibilities

  • Providing engineering expertise in the area of design, development, and test of methane/LOX propulsion systems.
  • Focus on the propulsion system of the future reusable suborbital VTVL flight program. Other tasks may include technology development and support of other projects.
  • Providing mentorship and guidance to less experienced technical team members - potentially up to 5 teammates

Accountabilities:

  • Conceptual and detailed design of LOX-Methane propulsion systems including items such as combustion chambers, injectors, pre-burners, gas generators, turbines, pumps, valves, propellant feed systems, tanks, pressurization systems
  • Design of the ground support equipment (GSE) and tooling for engine manufacturing, testing, and maintenance.
  • Design risk analysis.
  • Fluid CAD and simulation modeling, including propellant slosh and pogo oscillations.
  • Component and assembly specifications.
  • Fabrication and assembly schematics and procedures for engine and GSE.
  • Component testing procedures, including priming and water hammer analysis.
  • Provide technical guidance to fabricators and technicians 
  • System manufacturing and testing.

Required Skills/Experience:

  • Innovative and passionate about space
  • Experience leveraging additive manufacturing in engine design.
  • Bachelor's or advanced degree in aerospace engineering, manufacturing engineering, materials engineering, mechanical engineering, or engineering physics
  • 5+ years of professional experience working with combustion devices or fluid systems
  • Experience using CAD to design parts/assemblies
  • Experience developing hardware from concept to working prototypes
  • Hands-on project experience with fluid and mechanical systems, preferably as a team or sub-team lead
  • Experience with various propulsion system cycles and their benefits and nuances
  • Experience with cryogenic and supercritical fluid behavior.

Preferred Skills/Experience:

  • Master's degree in mechanical engineering or aeronautical/astronautical engineering
  • 8+ years of professional experience in aerospace engineering
  • 5+ years experience in engine test
  • Conjugate heat transfer analysis experience with high heat flux heat exchangers
  • Analytical/scientific programming experience (Python, Matlab, Excel, etc.)
  • Hands-on fabrication skills


 
Job Number: 2110128084
Job Location: Mojave, CA
Duration: 36 months
Input Date: 04/05/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PdIOQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead, Systems Engineering - Top Secret/SCI Required

Description:
The Systems Engineering Department is seeking a systems engineer to be a Lead or Chief Systems Engineer on a one or more programs. SSG specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control.
The successful candidate will act as the program technical lead, interface with the end customer, suppliers, and other external stakeholders. Regular duties include developing CONOPS into system requirements, managing specifications, and providing technical leadership from program kickoff to end item delivery.
The Lead or Chief Systems Engineer ensures the product is fully tested, requirements are verified and sold off, and the end item is delivered on schedule and within the allocated budget.

Essential Functions:
• Provide technical leadership, maintain customer communications, and organize work packages and assignments to meet program objectives.
• Establish product requirements and ensure the delivered end item meets the customer’s product specifications.

• Holds Technical Subject Matter Expertise in electrical, mechanical, electromechanical, optical or equivalent engineering discipline.
• Relevant experience with the design, manufacture, integration, test and sell-off of space-based subsystems.
• Ability to manage multiple and competing priorities.
• Ability to lead program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR).
• Ability to collaborate across all levels of leadership.
• Experience in empowering employees, leading and motivating teams, and fostering collaboration.
• Strong communication and interpersonal skills – taking complex concepts and sharing with others
• Ability to architect an end to end space system with a full understanding of the product lifecycle
• Experience with project management aspects of technology development programs.
• Experience with estimating and managing costs, & creating and managing schedules.

Qualifications:
• BS degree in Engineering, Physics, or other related scientific discipline and at least 7+ years of relevant space-based EO/IR systems engineering work experience; or Masters Degree in Engineering, Physics, or other related scientific discipline and 5+ years of relevant space-based EO/IR systems engineering work experience.
• 7+ years systems engineering experience with space-based EO/IR systems with electromechanical pointing and focus control.
• Candidate must hold an active Top Secret/SCI clearance as a prerequisite.
 
Job Number: 20191
Job Location: Wilmington, MA
Rate: $65.00 - $75.00
Per Diem: No
Overtime: Yes
Duration: One Year
Start Date: ASAP
Input Date: 05/10/2021
Last Updated: 06/16/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Loader

Description:
Chipton-Ross is seeking a Part-Time Loader for an opportunity in Grove City, OH.

The Warehouse Loader is responsible for assisting in all warehouse activities including, but not limited to, loading, repackaging, inventory, and maintenance. key responsibilities

EXECUTION
Assist with loading trucks with Client products in a way that complies with Company standards. Confirm trucks are loaded accurately, as per Account Manager's request. Ensure product is rotated on trucks and in warehouse in accordance with expiration dates. Properly clean and repackage product as set forth by Company standards. Appropriately dispose of damaged and / or Out Of Code (OOC) product once approved by the Operations Manager. Maintain cleanliness of warehouse by disposing of trash nightly, sweeping floors daily and using floor scrubber periodically.
PHYSICAL REQUIREMENTS
Employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. Employee frequently is required to walk and sit. Employee is occasionally required to stand and stoop, kneel, crouch, or crawl. Employee must regularly lift and/or move up to 25 pounds as needed. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Exposed to moving mechanical parts and outside weather conditions Noise level in the work environment is usually moderate Forklift and commercial vehicle operations minimum experience and qualifications Minimum 18 years old Current driver's license with clean driving record Mathematical skills, including the ability to add, subtract, multiply and divide

PART-TIME (approximately 25 hrs)
WORK HOURS: Monday-Friday: 11:30am-5:30pm

 
Job Number: 188292
Job Location: Grove City, OH
Rate: $DOE
Duration: 3 weeks
Input Date: 11/18/2020
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Zachary Fasano
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: zfasano@chiptonross.com
Website: www.chiptonross.com

Loads & Dynamics Engineer 3 & 4

Description:
Job Description:
  • Support loads and/or structural dynamics assessments for various production and developmental aircraft and weapons products at the St Louis and surrounding sites.They will be assigned to teams that design, analyze, and test products to assess the impact of launch, flight and landing environments / maneuvers on vehicle structural response and to predict structural loading and stiffness requirements for all parts and sub-systems.

Required:
  • Demonstrated experience in aerodynamics, structural Analysis, structural dynamics, or stability and control.
  • Experience in Modelling & Simulation and Tools & Process development.
  • Demonstrated problem-solving skills.
  • Possess interpersonal communication (written & verbal) skills in a team oriented environment.
  • Ability to interact professionally with customer, supplier, field & production representatives.
  • Requires Bachelor's degree in an engineering from an accredited course of study - Aerospace, Mechanical or Civil Engineering
  • Some positions require the ability to obtain a US Security clearance, which requires US Citizen; some require US person for ITAR purposes.  


 
 
Job Number: 2010110794
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 12/01/2020
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBdQAI&URLSource=cjhunter

MP&P Engineer 3

Description:
Chipton-Ross is seeking 4 MP&P Engineer 3's for an opening in Kent, WA.

RESPONSIBILITIES:
Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

POSITION RESPONSIBILITIES:
Assists with definition of requirements for tools, equipment, materials, parts and processes used in the engineering design, manufacture and/or maintenance of Boeing products
Drafts engineering specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes
Assists in evaluation of emerging technologies for potential application to business needs
Assists with development and qualification of new tools, equipment, materials, parts and processes to meet requirements
Performs routine tests and audits to qualify suppliers to applicable requirements
Conducts routine analysis to determine performance or reasons for failures of tools, materials, parts or processes
Assists in implementing corrective and preventive actions
Develops computer and production systems to satisfy user requirements
Uses project management tools to meet cost, technical, and schedule requirements.
Incorporates environmental health and safety, LEAN and Quality principles


REQUIRED EXPERIENCE:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
3+ years of experience in Electrical Engineering

ADDITIONAL EXPERIENCE:
A bachelors degree or higher in Electrical Engineering
Experince in electrical, electronic, electro-mechanical, electro-optical systems
Experience with engineering drawings and specifications
Experience with programming/CAD tools for design, data acquisition, and data analysis (e.g. AutoCAD, MatLab, COMSOL, etc.)

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

TRAVEL: YES
Possible travel.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 191425
Job Location: Kent, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/19/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

MRP/ERP Data Assistant

Description:
GENERAL CHARACTERISTICS:
This position provides assistance and support to the Engineering, Manufacturing Engineering, and Production Planning functions. Position manages existing data while ensuring accurate and timely loading of bills of material and parts data into business system (Epicor); processes "Quick Jobs", floor stock maintenance, and monthly metrics. Position is responsible for the administration of the ECO Process Site and procedures. Position supports workflow functions by moving among various assignments as needed. Work may be performed in an office setting and/or in the manufacturing area as needed.
ESSENTIAL DUTIES:
  1. Interfaces with Engineering, Purchasing, and other Manufacturing Engineering resources to collaboratively ensure data accuracy. Manages part descriptions in all systems to adhere to company standard naming policies. Reviews engineering drawings for consistency and accuracy.
  2. Sets up parts and Bill of Materials (BOM) detail in the business system (Epicor) manually and/or using data import tools.
  3. Serves as owner of Engineering Change Order (ECO) process and template
  4. Acts as Site Owner of ECO Process Site on (SharePoint).
  5. Maintains a firm understanding of each department's requirements in the ECO process and leads undertaking to continually improve process across departments.
  6. Uses VBScript, SQL and advanced Microsoft Excel proficiencies to update ECO template to coincide with process changes.
  7. Reviews Engineering Change Orders (ECO's) for accuracy and comprehension downstream in workflow.
  8. ESSENTIAL DUTIES (Continued):
  9. Maintains a broad knowledge base of business system processes and standards to serve as a Subject Matter Expert (SME). Coordinates with other SMEs to verify and troubleshoot changes in the business system. Creates and/or updates procedures / End User Processes (EUPs) as needed.
  10. Audits business systems for data anomalies, identifies root causes, and devises solutions. Works with IT to correct anomalies through reports and import functions (DMT), and modifies processes as needed to prevent reoccurrences.
  11. Sets up and serves as main contact for floor stock (vendor-managed and company managed). Works with Engineering, Purchasing, Assembly, and Vendors to identify and categorize floor stock parts.
  12. Responsible for setting up and maintaining manufactures / suppliers, processing part costs, calculating manufacturing lead times, etc.
  13. Supports make-or-buy decisions by generating Request For Quotes (RFQs).
  14. Assists Manufacturing Engineering by creating "Quick Jobs", including creating demand, creating a job, getting details form parts, updating routings, job scheduling, printing the job traveler and delivering the job traveler to operation work station.

OUALIFICATIONS REOUIRED:
An Associate degree or equivalent experience working with MRP/ERP is required. Position requires Microsoft Excel proficiency in macros, pivot tables, VBScript, and SQL. Must have working knowledge of an integrated manufacturing system and be capable of reading engineering drawings. Position requires excellent organization and communication skills, an aptitude for dealing well with people, analytical skills, and problem-solving ability. Position requires strong attention to detail. Must be highly reliable and work with minimal supervision. Must be a good organizer and decision-maker. Must be able to think creatively and innovatively. Flexibility and team skills are required. Previous manufacturing engineering experience preferred. Mechanical and electrical aptitude is a plus. Working knowledge or experience with engineering procedures is helpful.
 
 
Job Number: 2110129936
Job Location: Appleton, WI
Duration: 3 months
Input Date: 04/29/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PiTLQA0&URLSource=cjhunter

Machine Operator

Description:
Chipton-Ross is seeking a Machine Operator for an opening in Littleton/ Waterton, CO.

RESPONSIBILITIES:
Sets up and operates a variety of machine tools such as lathes milling machines shapers planers and precision grinders to make metal parts mechanisms tools or machines to exacting tolerances and dimensions. Interprets blueprints sketches and engineering specifications; determines sequence of operations number of cuts required and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work tooling feeds and speeds; measures marks and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material parts and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures.


REQUIREMENTS:
Typically requires completion of a formal apprenticeship or equivalent training and experience.
0-3 years of work experience
Familiar with 3 and 5 Axis machines. Composite machining a plus

EDUCATION:
HSD/GED

SHIFT:
4/10 A Track schedule and is also 2nd shift Monday-Thursday
 
Job Number: 190565
Job Location: Littleton/ Waterton, CO
Rate: $DOE
Duration: 15 months
Input Date: 04/12/2021
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Machinist

Description:
PDS Tech, Inc. is seeking a Machinist in Urbana, OH.

Summary:

  • Assembles, repairs, and fabricates metal parts by operating mechanical equipment.
  • Assembles parts into sub-units or complete units.
  • Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product.
  • Requires a high school diploma or its equivalent.
  • May be required to meet certain certifications in field and to have at least 0-2 years of experience.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision.
  • Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor/manager.


 

Special Considerations:
  • Lifting is generally at or below 30Lbs. without significant repetitions.
  • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
  • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.

 
Job Number: 2110132357
Job Location: Urbana, OH
Duration: 6 months
Input Date: 06/03/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PpKKQA0&URLSource=cjhunter

Machinist 2

Description:
Chipton-Ross is seeking a Machinist 2 for an opening in Chelmsford, MA.

RESPONSIBILITIES:
Sets up and operates a variety of manual and numerically controlled (NC) precison machine tools to make a variety of components, jigs, mechanisms, and/or tools to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on NC machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
- Ability to setup and operate precision 3-axis CNC machines such as Robodrill and Prototrak type machines.
- Ability to produce and edit G-Code NC programs with CamWorks or similar (CAD/CAM software).
- Ability to make on the fly adjustments as needed at the HMI.
- Familiarity with Fanuc, Fadal, and Prototrak controls.
- Familiarity with GD&T.
- Effective planning, prioritizing, and organizing tasks.
- Ability to follow work instructions or engineering drawings.
- Demonstrable commitment to safety at all times.
- Quality oriented and maintains strict attention to detail.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, 1st Shift
Full-Time

 
Job Number: 188032
Job Location: Chelmsford, MA
Rate: Up to $32.00 DOE
Duration: 4 Months
Input Date: 11/14/2020
Last Updated: 07/31/2021
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic

Description:
Maintenance Mechanic
Direct Hire
Starting Pay: $32.00/HR
Location: Saint Louis, MO 63106
Night Shift ONLY: 6:00 p.m. to 6:00 a.m. (12 hour shifts 3-2-2-3).

Summary:
To perform all functions of plant maintenance.   Primary responsibilities for support is preventative and predictive maintenance, calibrations, troubleshooting, repairs, installation of plant equipment, machinery, and buildings in a safe and professional manner.   Work within the guidelines of good manufacturing practices at all times. Support the plant by providing technical support as assigned.

Description:
Repair, maintain and troubleshoot machinery, building utilities, and equipment.
Use and operate Maintenance Department tools, machinery, and equipment in a safe and efficient manner.  Adhere to all GMP procedures.
Work from blueprints, sketches and schematics to troubleshoot and perform repairs on machinery and equipment with minimal instruction from Supervisor.
Assist all maintenance as needed and help in training and development processes.
Knowledge of Electrical/PLC/Instrumentation Control systems.
Proficient with mechanical, electrical, hydraulic and pneumatic equipment and systems.
Pipe fitting and Mechanical knowledge.          
General Welding skills desired or willingness to attain.     
Documentation of actions in service logbooks and work order system.
Capable of working independently or in a team atmosphere.   

Duties:
This position requires detailed knowledge of manufacturing equipment and the ability to make decisions concerning operation of this equipment which directly affects production capabilities.  As the individual progresses through the system, they will be asked to work with a reduced amount of supervision as skills improve.

Education & Experience:
Must have high school diploma or equivalent.
Degree preferred.
Must have a history of good attendance.
Must be willing to continue education through.
Schooling (courses chosen by supervision/management), Seminars, Training sessions, Step Program utilized for growth plan and evaluation.


 

 
Job Number: 2110128947
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 04/06/2021
Last Updated: 07/30/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Simmerman
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PfmiQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician

Description:
A Mid-Level maintenance technician job is available in Jenks, OK for a service client. This person will function as one of the Technicians at the customer site for a long-term maintenance contract.

Responsibilities:
* Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering
* Electromechanical skills, including motors, Troubleshooting skills with PLC controls, servos, gearboxes, and other discrete electrical control components.
* Practice safe work habits and abide by the safety rules in accordance with the safety policies set forth by the client.
* Provide electromechanical corrective repairs and preventative maintenance.
* Log all service work performed, downtime during repair, and account for equipment service requests.
* Participates in complex maintenance tasks, equipment trial runs, investigative tests, troubleshoot equipment failures, repairs and overhauls.
* Participates in training customers on complex products, operations and services.
* Performs semi-complex maintenance on tools, test equipment, etc.
* Maintains documents of all inspections, maintenance and repair work, and failures.
* Participates in the assessment of complex product/equipment performance based on field support data and recommends modifications or improvements.
* Responds to and corrects semi-complex equipment faults.

Requirements:
* Two years maintenance experience is preferred with electromechanical skills, including motors, gearboxes, conveyors, and other discrete components.
* HS diploma or equivalent required. Specialized skill training/certification may be required. An Associates' degree or 1-2 years of vocational technical training preferred.
* Five years maintenance experience with electro-mechanical equipment experience is preferred.
* Demonstrates comprehensive working knowledge of a technical or specialty area, and of operations, methods, and practices. Generally, 2-5 years of successful experience.
* Work in cooperation as a team with the 3PL warehouse operators.

This is a contract to hire position

If you are interested in this Maintenance Technician job in Jenks, OK please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 312906
Job Location: Jenks, OK
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/27/2021
Last Updated: 06/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Maintenance Technician

Description:
This position supports several Production Departments by keeping production equipment operating efficiently. This position ensures Company facilities, including restrooms, are maintained to OSHA and Company standards.

ESSENTIAL TASKS AND RESPONSIBILITIES:

The following job functions are not all-inclusive. The employee will be required to perform other job-related tasks/responsibilities requested by the supervisor. Job duties may change as required by needs of company.
 
  • Ensure production equipment operates efficiently by performing equipment maintenance on a daily basis.
  • Perform daily, weekly and monthly preventative maintenance inspections;
  • Conduct safety compliance inspections and maintains records of production equipment.
  • Performs and instructs personnel in equipment start-up procedures and machine operation.