Job Search Results

404 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 05:21AM Pacific Time by ContractJobHunter. )

Listings 1 - 404

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Design Engineers Needed

Description:
• Must have STC/commercial aircraft modification experience.
• Either Structural design experience, or System design experience required.
• Catia V5 experience required.
• Will also need to check in daily, attend weekly/daily conference calls, work on site at the facility in Tucson and require little to no supervision.



The Structures Company LLC is an AA/EOE.
 
Job Number: 474
Job Location: Tucson, AZ
Rate: Up to $63/Hr. **DOE**
Per Diem: Possible
Overtime: No
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/30/2021
Last Updated: 05/12/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
44442-1 - Manufacturing Planner III - Electrical/Electronics -

Description:
General Job Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

PROJECT/SKILLS
• Create wire harness fabrication planning, bills of material, and first article inspection plans. Development of installation plans may follow once the harnesses are ready to be installed in the aircraft. Initially working on fabrication and installation for work construction offering.
• Experience with tech writing is a huge plus

Education/experience
Typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).

*Out-of-state candidates are acceptable due to nature of job*
*Schedule: operates on 4/10 schedule, 5AM-3:30PM*
*U.S. citizenship required*


The Structures Company LLC is an AA/EOE.
 
Job Number: 468
Job Location: Mesa, AZ
Rate: Up to $50/Hr. **DOE**
Per Diem: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 04/15/2021
Last Updated: 05/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
61035 - Reliability & Maintainability Engineer

Description:
Reliability & Maintainability Engineer

Location: Fort Worth, TX (76118)

Job ID: #61035

12 month contract 

Position Responsibilities:
• Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
• Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Assess manufacturing parametrics and maintenance removal times.
• Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
• Perform budget estimating and management tasks.
Qualifications

Education Requirements:
• Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.
Position Requirements:
• Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
• Proficiency in Microsoft Office
• Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
• Candidates must be eligible to obtain Secret Security Clearance
Preferred Skills:
• Prior military experience maintaining rotory or tiltrotor aircraft.
• Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
• Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
• Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
• Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
• Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
• Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
• Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
• Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
• Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
• Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61035
Job Location: Fort Worth, TX
Duration: 12 month
Input Date: 04/30/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Technicians

Description:
STS Technical Services is hiring A&P Technicians in Macon, Georgia. 

Job Description:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Qualifications:

Education:

High School/ GED
A&P

Experience:

Required: A & P License; minimum 2 to 5 years’ experience with small aircraft/ general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft.
Several years or actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools.

Knowledge, Skills & Abilities:

Assignments require Standard Knowledge of a Technical Area.
Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
Performs moderately complex Technical Assignments.
Assists Advanced Level Technicians on more complex technical assignments.
Knowledge of machines and tools, including their uses, repairs and maintenance.
Knowledge of principles and processes for providing customer service.
Skilled with repairing, troubleshooting, installing and equipment maintenance.
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36533
Job Location: Macon, GA
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Nicole Taylor
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Technicians

Description:
STS Technical Services is hiring A&P Technicians in Macon, Georgia. 

Job Description:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Qualifications:

Education:

High School/ GED
A&P

Experience:

Required: A & P License; minimum 2 to 5 years’ experience with small aircraft/ general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft.
Several years or actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools.

Knowledge, Skills & Abilities:

Assignments require Standard Knowledge of a Technical Area.
Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
Performs moderately complex Technical Assignments.
Assists Advanced Level Technicians on more complex technical assignments.
Knowledge of machines and tools, including their uses, repairs and maintenance.
Knowledge of principles and processes for providing customer service.
Skilled with repairing, troubleshooting, installing and equipment maintenance.
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36533
Job Location: Macon, GA
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Nicole.Taylor@ststechnicaljobs.com
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ACAS / TCAS System Development Engineer

Description:
ABOUT THE JOB:
This position is responsible for system development activities for an Aircraft Collision Avoidance System (ACAS) in accordance with ARP4754A systems development cycle.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Knowledge of ARP4754A systems development cycle
• Familiarity with DO-178B
• Experience with requirements development, capture and management
• Experience with DOORS for requirements capture and management
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

HIGHLY PREFERRED SKILLS:
• Familiarity with Aircraft Collision Avoidance Systems (Detect and Avoid)
• Familiarity with DO-386, Minimum Operational Performance Standards for unmanned aircraft

PREFERRED SKILLS:
• TCAS product experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 04/30/2021
Last Updated: 05/10/2021
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Civil Aircraft Leading Scientist - Design and Research - China.

Description:
Advanced Civil Aircraft Leading Scientist - Design and Research - China.


Our Aerospace Client in China requires additional support for their current and future programs. They require an Scientist for Aircraft Design and Research activity - New Energy - New Materials - New Technology.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Have  high-level scientific and technological innovation ability and team leadership ability, be good at grasping the global trend of science and technology, and be able to lead the team to seize strategic opportunities and form a competitive advantage.
  • Having first-class academic achievements and influence in the field; or mastering advanced, key and core technologies.
  • Good experience in leading the team to carry out innovative activities and excellent academic exchange ability.
  • Doctorate Degree or High Level Degree and relevant experience.
  • Good command of English listening, speaking, reading and writing.
Job Description:
 
  • Organize the formulation of business development plan, formulate and implement annual goals and strategies, and grasp the overall direction and business realization.
  • Grasp the research direction of business sector, track the international and domestic frontier, and promote the development of business sector construction.
     
  • According to the business development needs of corresponding sectors, the organization and construction of core business architecture, major project technology selection and new technology research work, and the formulation and implementation of major business technology decisions, solutions and major iterations.
  • Team management, team building, incentive, training, improve the overall technical ability, improve the R & D specifications, processes, management system.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight
their relevant experience upon application.


 
Job Number: BH-368
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Structural Dynamic Analysis Engineer - Aircraft - China.

Description:
Advanced Structural Dynamic Analysis Engineer - Aircraft - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Advanced Structural Dynamic Analysis.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Experienced in conventional structural dynamic response analysis software (NASTRAN, ANSYS, etc.).
  • Working experience in vibration field (more than 10 years).
  • Solid and rich mechanical vibration professional foundation.
  • Working experience in international Aerospace companies with a  doctoral degree  preferred.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
  • Modelling analysis and optimization of structural dynamic characteristics (modal, response).

 Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-366
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Catia V6 & 3DExperience PLM Engineer, Fort Worth, TX

Description:
Aerospace Catia V6 & 3DExperience PLM Engineer, Fort Worth, TX
JR-020963

• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

Responsibilities:

The incumbent has responsibility to upgrade the existing PLM (Enovia), against the Production engineering changes,
• Read and interpret engineering drawings, engineering Bill of Material (BOM), and engineering notes.
• Production engineering Updates: Process Planning, Tool Design requirements, NC Programming process, Manufacturing process planning, materials and treatments, Non-metallics requirements, inspection process changes
• Update the product digital definition within the Product Lifecycle Management (PLM) system with related specifications and supporting documentation as depicted on the face of the engineering drawing / exiting / revised Process changes.
• Release product updates using Dassault Systems 3DExperience and ENOVIA system.

Skills:

• Read and interpret an engineering drawing, experience with an aircraft engineering drawing is a plus.
• Understanding Aircraft Structures, systems, and assemblies
• Must have strong computer skills using Microsoft office Suite
• This position requires use of Information Traffic in Arms Regulations (ITAR).
• Production Engineering Skills (Process Planning, Tool Design, NC Programming, Overall shop floor Operations, Vendor liaison, Mfg Management etc).
• The ability to work independently on all Manufacturing Engineering activities – methods engineering
• Proficiency in Catia V6 / Dassault Systems 3DExperience for modeling and detailing required for Manufacturing Engineering.
• Understanding of Shop floor practices.

Primary System Environments:

• Dassault Systems 3DExperience
• ENOVIA
• Bedvue (Data base)
• SharePoint

Education: BS in Engineering Discipline (EE, ME, Aero desired)
Years of Experience: Aerospace/Defense – 5 years related experience.
Citizenship: US citizen
Skills & Experience
ENOVIA, Production Engineering, Product Lifecycle Management (PLM) Software

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
• Apply

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Arlington-Texas/PLM-Engineer_JR-020963
 
Job Number: JR-020963
Job Location: Fort Worth, TX
Input Date: 05/13/2021
Firm Name: CYIENT
Attention: Elizabet
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Model Based Systems Engineer, Fort Worth, TX

Description:
Aerospace Model Based Systems Engineer, Fort Worth, TX
JR-022258

You Will:
• Conduct system-of-systems modeling, operations analysis, and requirements decomposition for development and production products.
• Define and trace vehicle design requirements, test data, and performance values associated with engineering and manufacturing development of the aircraft and its subsystems
• Coordinate and execute milestone project reviews, technical reviews, and decision tradeoff analysis.
• Develop requirement and requirements specifications for the air system and subsystems, support development of requirements and specifications for component and assemblies.
• Develop operational models using the DoD Architecture Framework
• Use Model Based Systems Engineering principles to develop SysML systems descriptions
• Manage program reviews to include Systems Requirements and System Functional Reviews, Preliminary Design and Critical Design Reviews.
• Collaborate with design engineers in the development of Statements of Work.
• Coordinate with design engineers, specialty engineering, flight technology and build team to ensure a coherent set of requirements is being developed. • Execute design reviews at the Tier I and Tier II level, ensuring all necessary deliverables are complete and to the required standard.
• Assist in the management of the program product lifecycle management tool for the program.
• Work with IPTs to develop verification plans for each subsystem.
• Perform RIO development and tracking with program management and support IPT RIO management.
•Track and capture design decision notices, impacts and design changes as they occur throughout the program.
Ability to apply systems engineering processes in support of system life cycle development

You Will Need:
• Demonstrated knowledge of Model Based Systems Engineering (MBSE) experience highly preferred
• Experience in SysML, MBSE and DoDAF modeling
• Proficiency with MagicDraw
• System-of-systems modeling experience
• Parametric modeling and simulation

Education: •Bachelor of Science in applicable Engineering Discipline (Systems, Aerospace, Electrical or Mechanical Engineering required)
• Master’s degree preferred.
Years of Experience: 5-7+ years engineering in the Aerospace industry
Citizenship: US person
 
Job Number: JR-022258
Job Location: Fort Worth, TX
Input Date: 05/03/2021
Firm Name: CYIENT
Attention: Elizabeth
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Publications –Technical Writer, Arlington, TX

Description:
Aerospace Technical Publications –Technical Writer, Arlington, TX

JR-020866



• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

JOB SUMMARY:

Administer and coordinate the development of Aerospace technical publications, related data and technical services support. The project is about the creation and revision of the maintenance documentation in S1000D & iSpec2200 standard. The manuals include but not limited to:
• Line Maintenance Manuals
• Fault Isolation Manuals
• Illustrated Parts Catalogues
• Illustrated Tools and Equipment Catalogues
• Engine Manual (EM)
• Engine Illustrated Parts Catalogues (EIPC)
• Component Maintenance Manuals (CMM)
• Component Maintenance Publications (CMP)
• Inspection and Repair Manual (IRM)
• Service Bulletins (SB)
• Service Information Letters (SIL)
• Spare Parts Bulletin (SPB)
The inputs will be Engineering Drawings, Bill of materials (BOMs), Production operation sheets, Technical mark-ups from Engineering, Factory Modification Sheets (FMS), Change Requests, SIL, SBs, TRs, repair procedure and customer specific documents.
The softwares used are R4i S1000D Suite, Adobe Acrobat Professional, Arbortext, Isodraw, NX, Visualizations Mockup and JT2GO.

ESSENTIAL JOB DUTIES:
• Administer and coordinate Technical Publications and Document Control groups consistent with the goals and objectives of the Engineering Department.
• Research and review engineering design drawings, engineering orders, and related technical data defining aeroengine modifications and determine their effect on aeroengine technical manuals and publications such as CMM, IPC etc.
• Write/Author technical content in Simplified Technical English based on the engineering inputs.
• Provide written data in S1000D standards using Client specific CSDB and publishing packages for the above technical manuals and.
• Develop, maintain and manage all document control services performed for the client.
• Provide input and suggestions for the continuous improvement of the various Department procedures, controls, flows and systems, and become familiar with Cyient internal policies and procedures.
• Maintain involvement in day-to-day Cyient operations to ensure that the highest level of technical support is maintained at all times.

Qualifications:

MINIMUM:
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. 'US Person' includes US Citizen, lawful permanent resident, refugee, or asylee.
• Five (5) years minimum technical publications experience involving aircraft/aeroengine related assignments as a Technical Author, Technical Illustrator or Editor.
• Must possess comprehensive knowledge of technical publications development practices, business environment, the S1000D standards and aircraft technical manuals such as MM, IPC, etc.
• Must have comprehensive knowledge of personal computer systems with Microsoft Office, xml/sgml editors and S1000D platforms. Must have excellent oral, written and organizational skills that are easily applied to administration and supervision.
• Must be able to read, write and understand English.
• Must have the ability to supervise, organize and motivate technical and clerical employees.

Preferred:
• Strong hands-on experience in developing illustrations for Aircraft CMM, AMM, SRM and Service bulletins
• Exposure to Aero Engines, Aero systems & Avionics systems is preferred Familiar and on-hands experience in various Technical publications tools – IsoDraw,
• Familiar with CAD Tools (NX, Catia, etc) and importing product data to generate illustrations
• Sound knowledge of Techpub standards like S1000D, ATA 100, iSpec 2200, ASD-STE 100 and Simplified Technical English.
• Ability to work in environment using Common Source Data Base (CSDB) and tools like R4i CSDB.
• Ability to create intelligent graphics and companion files as per S1000D standards.
• Awareness of various OEM business rules of Airbus and Boeing etc. while working on S1000D projects
• Responsible for the on time delivery and quality of the projects
• Good oral and writing skills, Ability to read and interpret engineering drawings

Skills & Experience
Technical author, Technical Illustrator, Technical Publications
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
• Apply


https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Arlington-Texas/Technical-Publications--Technical-Writer_JR-020866
 
Job Number: JR-020866
Job Location: Arlington, TX
Input Date: 04/21/2021
Firm Name: CYIENT
Attention: Elizabeth
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Aerodynamic Shape Design - China

Description:
Aircraft Aerodynamic Shape Design - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Aerodynamic Shape Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 

  • Degree qualified or Doctorate level.
 
  • Have a strong level of aircraft overall design and aerodynamic shape design, have rich experience in whole aircraft aerodynamic shape design and multidisciplinary optimization and analysis, and have participated in shape design of many models (15 years or above).
 
  • Have rich experience in shape quality control, proficient in the shape design workflow, quality control system and quality improvement methods of the models.
 
  • Proficient in the formulation method of shape tolerance index, proficient in aircraft waste resistance control, master the factors influencing tolerance formulation, and be able to carry out analysis
 
  • Familiar with aircraft structure design and process design, familiar with the method of dimensional tolerance allocation, able to accurately grasp the key sensitive factors affecting aircraft performance index, and formulate optimization measures.
 
  • Have rich experience in aircraft shape deviation evaluation, and have strong ability to analyse, solve, communicate and coordinate aircraft shape related problems encountered in engineering, manufacturing and operation.
 
  • Have  project management experience, can lead the team to carry out the work of aircraft shape quality control and shape quality improvement
 
  • Equivalent qualification of aerodynamic shape design and six sigma qualification are preferred
 
  • Master the development trend of new technology in the industry, have certain foresight, and be able to use the existing resources of the company to carry out advanced theoretical research and design analysis of aerodynamic shape
 
  • Proficient in English listening, speaking, reading and writing
 

Role and Duties:
 
  • Assist the department leaders to control and improve the aerodynamic shape and shape quality of aircraft products, and improve the shape professional ability system and design quality management system
  • Assist the chief model engineer in tackling major engineering problems and key technologies of shape specialty
  • Advanced aerodynamic shape theory research and design analysis.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Part Time position as well as Full Time.



 
Job Number: BH-338
Job Location: China, China
Rate: Salary + Expanses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Automated Flight Systems Design - Electric Control - China.

Description:
Aircraft Automated Flight Systems Design - Electric Control - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Automated Flight Systems Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 10 years working in the field of automatic flight system for aerospace companies.
  • Working experience in flight control system, requirement analysis and architecture design of flight control system, safety analysis experience.
  • Experience in automatic flight system control law, automatic landing, software development or simulation model development.
  • Have control theory and control engineering, navigation guidance and control experience. 
  • Degree Major in information and communication engineering, electronic science and technology, civil aviation airborne electronic information engineering, aerospace science and technology, software engineering, etc. or master relevant professional knowledge, and be proficient in using relevant tools and software;
  • Good ability of using computer, developing simulation model and programming software.
  • Dedication and Integrity.
  • Proficient in English listening, speaking, reading and writing.
 

Job Description:
 
  • Automatic flight system design post mainly designs the functions, requirements and architecture of CATIII automatic landing system.
  • Automatic flight (including automatic landing) control law and mode logic conversion, The design of monitor and voting device.
  • Airworthiness compliance test verification of automatic landing system.
  • Cat IIIA automatic landing system desktop verification and Monte Carlo simulation verification, cat IIIA automatic landing system function, performance, cross-linking, pilot in the loop evaluation test verification, cat IIIA automatic landing system airworthiness compliance scheme research.
  • Automatic flight (including automatic landing) system mode logic conversion design . Automatic flight (including automatic landing) system control law design,
  • Cat IIIB automatic landing system function definition and decomposition, requirement definition and decomposition (including model-based performance requirement decomposition) and architecture design.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-367
Job Location: China, China
Rate: Salary + Expenses and Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Automatic Flight Control Systems Design Specialist - China.

Description:

Aircraft Automatic Flight Control Systems Design Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Automatic Flight Control Systems Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 10 years in the field of automatic flight system.
  • Working experience in civil avionics system.
  • Experience in avionics system requirement analysis, architecture design and safety evaluation.
  • Experience in algorithm research, software development or simulation model development of internal core function modules of automatic flight system.
  • Proficient in English listening, speaking, reading and writing.
  • Degree qualified or Doctorate.
Role and Duties:
 
  • Cat IIIA automatic landing system desktop verification and Monte Carlo simulation verification, cat IIIA automatic landing system function, performance, cross-linking, pilot in the loop evaluation test verification, cat IIIA automatic landing system airworthiness compliance scheme research.
 
  • Automatic flight (including automatic landing) system control law design, automatic flight (including automatic landing) system mode logic conversion design.
  • Cat IIIB automatic landing system function definition and decomposition, requirements definition and decomposition (including model-based performance requirements decomposition) and architecture design.

Candidates should be prepared to live and work in China full time on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-355
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Brake Control System Integrated Design - China

Description:
Aircraft Brake Control System Integrated Design - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Brake Control System Integrated Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • At least 10 years experience in brake control law design in Aerospace company.
  • Experience in forward design, implementation, debugging and optimization of brake control law.
  • Have solid and rich control theory foundation.
  • Proficient in MATLAB, motion and other software.
  • Team work, self driving and result oriented.
  • Doctoral degree is preferred.
  • Familiar with brake control system forward design process, familiar with 4754A, MBSE theory and method.
  • Proficient in advanced automatic control theory.
  • Proficient in brake control system functional architecture, physical architecture, control architecture design.
  • Proficient in simulation analysis of brake control law of brake system, proficient in advanced full adjustment anti-skid algorithm and control logic development.
  • Proficient in software development and parameter adjustment of brake control system.
  • Brake control system function analysis, brake control system requirements capture, validation and validation, brake control system physical architecture and design, brake control system integration design, brake control system interface definition capabilities.
  • Key equipment design of brake control system, control law and logic design of brake control system, human-machine interface design of brake control system, simulation of brake control system.
  • Software design of brake control system and complex electronic hardware design of brake control system.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
 
  •  Integration design, simulation calculation, controller development, flight test, airworthiness certification and other work of the brake control system (ATA32) in the whole life cycle of each model.
  • Top level functions, requirements, interface definition and allocation of brake control system, top-level architecture design, top-level flight test planning and airworthiness compliance planning, etc.
  • The top-level functional architecture, physical architecture and control architecture of brake control system are designed.
  • Modelling and Simulation of brake control law.
  • Software and hardware development of brake control law.
  • Brake control system integration design work.

 Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-345
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electronic Flight Manual Specialist - China

Description:
Aircraft Electronic Flight Manual Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Electronic Flight Manual System.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:

 
  • Experience in civil aircraft performance algorithm design and performance software development, airworthiness certification experience such as do-178 B / C, electronic flight manual development and airworthiness certification experience is preferred, with more than 10 years of working experience.
  • Proficient in performance algorithm, proficient in performance software development, proficient in electronic flight manual or airborne software airworthiness certification.
  • Have strong model experience.
  • Good communication and expression skills
  • Good team work spirit
  • .Proficient in English listening, speaking, reading and writing
  • Degree qualified or Doctorate.

  Role and Duties:

 

  • Participate in EFM requirement analysis and design
  • Participate in the software architecture design of electronic flight manual
  • Participate in the design of electronic flight manual performance algorithm
  • Participate in the formulation of technical scheme, technical specification and technical index of the aircraft's electronic flight manual
  • Participate in solving airworthiness certification technical problems of the aircraft's electronic flight manual
  • Participate in the application research of new technology in civil aircraft performance calculation software.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Full Time employment.



 
Job Number: BH-342
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Engine Mechanics

Description:
STS Technical Services is hiring Aircraft Engine Mechanics in Ypsilanti, Michigan.

Position Summary:

Aircraft Engine Mechanic doing teardown, inspections and overhauls on a variety of different aircraft engine models.

Responsibilities:
Disassemble, inspect, assemble engines I.A.W. Manufacturers Manuals.
Perform engine removals and installations on-wing.
Be proficient in reading OEM Manuals and precision measuring tools.
Perform repair processes to engine components.
Qualifications:
Must be able to multitask, respect / maintain confidentiality, be service oriented, be trustworthy / ethical, and be sensitive/respectful of diverse populations/cultures.
Must work at a fast pace and handle stress and problematic issues well with a good attitude.
Experience and Skills Aircraft Engine experience preferred.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36928
Job Location: Ypsilanti, MI
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Amber Mallak
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Environmental Control Systems Integrated Simulation Design - China.

Description:
Aircraft Environmental Control Systems Integrated Simulation Design - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Environmental Control Systems Integrated Simulation Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Proficient in MATLAB, Simulink simulation tools and use.
  • Proficient in control law and logic design of environmental control system.
  • Proficient in real-time simulation model of control law and control logic.
  • Proficient in real-time simulation model parameter adjustment, verification and system integration simulation of control law and control logic.
  • Familiar with DO-178
  • Familiar with real-time simulation industry requirements, the latest developments.
  • Participated in the system design based on real-time simulation of civil aircraft project.
  • Good command of English listening, speaking, reading and writing.
  Role and Duties:
 
  • Design, specification and process establishment of control law and logic of environmental control system.
  • Real time simulation modelling, specification and process establishment of control law and control logic of environmental control system.
  • Real time model parameter adjustment and verification of control law and control logic of environmental control system.
  • Real time simulation integration and verification of environmental control system.
  • Tracking the frontier technology of real-time simulation.
  • Real time simulation training.
  • Assist in real-time simulation design and verification planning of control system.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-347
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fire Protection Systems Specialist - China

Description:
Aircraft Fire Protection Systems Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Fire Protection Systems.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.



Required Experience and Qualifications:
 
  • At least 3 years experience in aircraft fire protection design or fire protection system design.
  • Participated in aircraft fire prevention or Airworthiness of fire prevention system.
  • Experience in aircraft system integration design.
  • Have the ability and experience of CFD calculation and analysis.
  • Have participated in at least one type of aircraft fire protection or fire protection system design.
  • Familiar with Halon alternative fire fighting technology, relevant working experience is preferred.
  •  Aircraft system engineering design; aircraft fire protection system design; fire science; computational fluid dynamics; fire simulation and simulation; basic knowledge of aircraft airworthiness certification.
  • Be able to design and integrate related subsystems independently.
  • Be able to independently carry out fire extinguishing system performance simulation analysis or aircraft fire simulation.
  • Be able to independently carry out the test design of related subsystems of fire protection system.
  • Conscientiousness, good teamwork spirit, good communication and coordination ability, multi-cultural working atmosphere.
  • Proficient in English listening, speaking, reading and writing.
  • Degree qualified or Doctorate.
Role and Duties:
 
  • Design of fire protection system for specified aircraft.
  • Definition and confirmation of fire protection system requirements for specified aircraft models.
  • Airworthiness verification plan formulation and compliance description of fire protection system for specified aircraft models.
  • Simulation analysis of fire extinguishing system for specified aircraft.
  • Selection and evaluation of environmental protection fire extinguishing agent.
  • Environmental protection fire extinguishing system design and verification test planning, and participate in the construction of test facilities.
  • Work related to airworthiness certification of environmental protection fire extinguishing system and communicate with FAA, EASA and other authorities.
  • Participate in fire risk analysis and assessment of specified aircraft models.
  • Participate in the formulation of fire extinguishing system simulation analysis specification.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 


 
Job Number: BH-351
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Flight Controls Systems Analysis Engineer - China.

Description:
Aircraft Flight Controls Systems Analysis Engineer - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Flight Controls Systems Analysis.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 10 years experience in safety design and evaluation of flight control system.
  • Working experience in international Aerospace Company.
  • Good command of English listening, speaking, reading and writing.
  • Degree qualified or Doctorate.

 Role and Duties:
 
  • Participate in the Aircraft's airworthiness certification flight control system safety evidence documents (including SSA) preparation.
  • Participate in the preliminary safety assessment of the Aircrafts flight control system (PSSA).
  • Assist the flight control system department to improve the safety design and analysis ability of flight control system.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 

 
Job Number: BH-353
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Flight Management System Design - China.

Description:
Aircraft Flight Management System Design - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Flight Management System Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Working experience in international Aerospace Companies,  institutions or universities, degree qualified or  doctoral degree.
  • More than 10 years in the field of flight management system.
  • Working experience in civil avionics system.
  • Experience in avionics system requirement analysis, architecture design and safety evaluation.
  • Experience in algorithm research, software development or simulation model development of internal core function modules of flight management system.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
 
  • The core algorithm and calculation logic design of performance management, trajectory prediction, horizontal guidance, vertical guidance and other functional modules of flight management system.
  •  Simulation model development of performance management, trajectory prediction, horizontal guidance, vertical guidance and other functional modules of flight management system.
  • Simulation model integration test between internal modules of flight management system.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-354
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Flight Test Operation Manual Specialist - China.

Description:
Aircraft Flight Test Operation Manual Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Flight Test Operation Manual creation.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Doctoral level, with senior industry experience could be relaxed to Degree level with Flight control technology experience, aircraft overall design, aerodynamics and flight mechanics, aircraft power engineering, aircraft structure and strength design, flight control engineering, aircraft avionics and electrical, aviation engineering experience.
  • Familiar with unit operation procedure, more than 10 years experience in design or test verification of operation procedure. Pilot or flight test engineer qualification is preferred, civil wide body aircraft type working experience is preferred.
  • Have the knowledge of civil aircraft overall design, flight manual and system principle.
  • Familiar with the flight manual of each typical aircraft type, familiar with the design requirements and design verification methods of civil aircraft crew operation procedures.
  • Good computer use ability, communication ability, logical thinking ability, analytical ability and oral ability.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
 
  • Engaged in the design and verification of the clients flight manual operation procedures.
  • Carry out research on the operation procedures of typical civil aircraft flight manual.
  • Carry out optimization and verification of aircraft operation program design.
  • Complete customized flight manual design for  aircraft.
  • Establish and improve the verification method and specification of flight manual operation procedure design.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.



 
Job Number: BH-361
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Flight Test Planning Specialist - China.

Description:
Aircraft Flight Test Planning Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Flight Test Planning.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Working experience in aerospace companies. Doctoral degree is preferred; major in aircraft overall design, aerodynamics and flight mechanics, aircraft power engineering, aircraft structure and strength design, flight control engineering, aircraft avionics and electrical, aviation engineering.
  • More than 10 years and at least two types of flight test experience, including at least 3 years of civil aircraft flight test experience. Flight test engineer qualification is preferred, flight test experience of civil wide body aircraft is preferred.
  • Have civil aircraft overall design knowledge, flight test knowledge and system principles.
  • Be familiar with the purpose and method of civil aircraft flight test, understand the logical relationship of each subject, and have the ability to analyse flight test requirements and plan model flight test scheme.
  • Good computer use ability, communication ability, logical thinking ability, analytical ability and oral ability.
  • Good command of English listening, speaking, reading and writing.
  Role and Duties:
 
  • Engaged in Clients model flight test demand analysis, flight test planning research and design work.
  • Research on flight test planning and implementation experience of typical civil aircraft models.
  • Carry out flight test demand analysis of the Aircraft and other models.
  • Complete the flight test planning of the Aircraft and other models.
  • Establish and improve flight test requirement analysis method and flight test planning specification.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-362
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Inerting Systems Engineer - China.

Description:
Aircraft Fuel Inerting Systems Engineer - China.

Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Fuel Inerting Systems.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:

 
  • More than 20 years working experience in fuel inerting systems.
  • More than 15 years working experience in fuel inerting system integration.
  • Familiar with international and domestic standards and specifications of fuel inerting system.
  • Good command of English listening, speaking, reading and writing.
  • Degree qualified or Doctorate.
 Role and Duties:
 
  • Fuel inerting system integration capacity building.
  • Key technical support for airworthiness certification of Aircraft fuel inerting system.
  • Construction of fuel inerting system standard specification system.
  • Requirement capture design and analysis.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 

 
Job Number: BH-348
Job Location: China, China
Rate: Salary +Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Tank Safety Specialist - China.

Description:
Aircraft Fuel Tank Safety Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Fuel Tank Safety, explosion prevention.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 5 years working experience in civil aircraft fuel system or fuel tank explosion protection field. Working experience in aircraft design companies.
  • Proficient in fuel tank ignition source protection technology.
  • Proficient in flammability analysis algorithm and inerting system performance calculation.
  • Proficient in English listening, speaking, reading and writing.
  • Degree qualified or Doctorate.
.Role and Duties:
 
  • Proficient in fuel tank system ignition source protection, especially proficient in composite material fuel tank system lightning ignition source protection design, analysis and verification.
  • Proficient in fuel tank inerting system development requirements, development process and main design indicators, leading the team to improve inerting system integration design ability.
  • Fuel tank thermal analysis, fuel tank oxygen concentration analysis, quantitative analysis of fuel tank flammability related work.
  • Participate in the aircrafts fuel tank explosion proof airworthiness certification technical issues.
  • Participate in the aircraft project composite fuel tank system ignition source protection scheme design, lightning protection design analysis, other key technology research.
  • Participate in civil aircraft ignition source protection, inerting system technical specifications, technical indicators.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 

 
Job Number: BH-352
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 05/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Level Integrated Test Technology Engineer - China.

Description:
Aircraft Level Integrated Test Technology Engineer - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Level Integrated Test Technology.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Skilled Engineer with working experience more than 10 years.
  • Master professional knowledge of aircraft operation system, scene capture, analysis, modelling and simulation.
  • Good at using MATLAB, Magicdraw, Python is preferred.
  • Proficient in English listening, speaking, reading and writing.
  • Degree qualified or Doctorate.


Role and Duties:
 
  • Carry out the technical research of aircraft scene verification test environment construction project.
  • The model project team coordinates the overall planning of the aircraft level physical integration test task, and provides guidance and technical support for the test verification work of the model project team or each unit.
  • Undertake the professional capacity building of aircraft physics integration based on scene.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 



 
Job Number: BH-343
Job Location: China, China
Rate: Salary +
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Line Maintenance Mechanics

Description:
STS Technical Services is hiring Aircraft Line Maintenance Mechanics in Mesa, Arizona.

Job Duties:
Maintenance Technicians are FAA certified Airframe and Powerplant (A&P) who perform direct maintenance in accordance with Airlines Continuous Aircraft Maintenance Program (CAMP).
Technicians working on aircraft, components or related parts of aircraft are responsible to perform work outlined on applicable work forms in accordance with airlines policies and procedures, manufacturer’s manuals and FAA requirements.
Overhaul, maintenance, and repair of airframe components, power plants, aircraft communication, navigation equipment, and associated components in accordance with airlines manuals, manufacturer’s manuals, bulletins, and orders.
Ensure that the appropriate tag is attached to all parts removed from an aircraft in accordance with Airlines policy.
The Technician, in performing his or her duties is required to be constantly alert for defective, worn or failed parts as well as safe working conditions.
Proper execution of an Airworthiness Release.
Responsible to sign for the accomplishment of work on applicable work forms and records.
A Technician, when qualified, may be required to perform the duties of Inspector in accordance with the Inspector job classification as described in the manual.
Responsible to keep the work area in a clean, safe and orderly manner.
Will be assigned to such housekeeping duties as policing his or her work and/or repair area as well as maintenance of company property.
Process all necessary paperwork as mandated by regulation.
Other duties as assigned.
Qualifications:
Combination of Education and Experience will be considered.
Must be authorized to work in the US as defined by the Immigration Act of 1986.
Must pass a Criminal Background Check.
Education: High School Diploma/GED
Valid Airframe & Powerplant Certification (A&P)
Minimum two (2) years of experience in aircraft maintenance for Part 121 environments.
Previous A320 experience
A320 Gen Fam (verifiable)
Must have a valid Driver’s License and clean driving record
Sponsorship is not available for this role
Effective Communication skills, both verbal and written.
Proficiency with Microsoft Office Word and Outlook email.
Physical Requirements:
The Physical Demands and Work Environment described here are a representative of those that must be met by a Team Member to successfully perform the essential functions of the role.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role.
Mechanic – While performing the duties of this job, the Team Member is regularly required to stand, sit, talk, hear, see, reach, stoop, kneel, climb, and use hands and fingers to operate various tools (i.e. drills, ladders, welding, chemicals, etc.).
May be required to lift, push, pull, or carry up to 300 lbs. May be required to work various shifts/days in a 24-hour situation.
Regular attendance is a requirement of the role. Exposure to extreme noise (i.e. airport with planes, vehicles, and other machinery), temperature, wind, and light fluctuations. Ability to work in a confined area as well as the ability to sit at a computer terminal for an extended period of time.
Ability to wear personal protective gear. Some travel may be a requirement of the role.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37035
Job Location: Mesa, AZ
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Amanda Ruby
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Load Integration Design Specialist - China.

Description:
Aircraft Load Integration Design Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Load Integration Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 15 years of experience in load design and more than 5 years of experience in load management in Aerospace companies.
  • Be familiar with the whole design process and method of large civil aircraft model, have deep insight and understanding of the load airworthiness requirements and design technology development trend of international large passenger aircraft.
  •  Be able to formulate the load work plan and requirements for the whole design cycle of the model.
  • Master load modelling method and verification method.
  • Ability to quickly evaluate the load magnitude of large aircraft components.
  • Be able to plan professional development.
  • Have the ability to skilfully use professional standards, norms and processes.
  • Have the ability to use professional knowledge to solve and guide model technical problems.
  • Have the ability to cooperate and coordinate with related majors by using professional knowledge.
  • Professional, serious working attitude, strong sense of responsibility.
  • Good command of English listening, speaking, reading and writing.
  • Degree or Doctorate qualified.

Role and Duties:
 
  • Load design work plan.
  • Load design requirement management guidance.
  • Guidance of load design scenario definition.
  • Guidance of load modelling method.
  • Establish the sensitivity analysis scheme of load design input.
  • Guidance of load flight test verification.
  • Group guidance on load airworthiness compliance.
  • Load design risk assessment.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-360
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Operation Scenario and Operation Environment Analysis Engineer - China

Description:
Aircraft Operation Scenario and Operation Environment Analysis Engineer - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Operation Scenario and Operation Environment Analysis.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • At least 10 years working experience in aircraft / system design
  • More than 10 years of civil aircraft operation experience or conducted operation scenario research
  • Have the knowledge and background of system engineering, and have carried out key research on the process of functional analysis.
  • Familiar with SysML modeling language
  • Proficient in English listening, speaking, reading and writing
  • With international Company experience or well-known enterprises, institutions or university experience,  a doctorate is preferred.
  Role and Duties:
 
  • Establish the definition method and process of aircraft operation scenario
  • Establish the scene database of aircraft operation
  • Establish scenario based functional analysis method and process
  • Establish the best practice of scenario based functional analysis method
  • Aircraft operation scenario definition and analysis training.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Part Time position as well as Full Time.
 
Job Number: BH-336
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Melbourne, Florida.

Position Overview:

The Aircraft Painter is in charge of aircraft and its sub-assemblies painting and sealing process including surface preparation, masking, and chemicals handling.  This may include limited duties of paint and sealant application.

Job Duties:
Prepare surfaces to be painted or sealed as requested by the working instructions using abrasives, solvents, and brushes.
May perform sealant application assuring compliance with technical and quality requirements.
May assist with application or installation of logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, and patterns.
Ensures the use of appropriate technical references and tools in performing paint and sealing duties.
Perform cleaning and maintenance of all currently used painting or sealing equipment.
Sets up ladders, and scaffolding according to regulations and aircraft requirement.
Ensures all Federal and local environmental and OSHA/TOSHA regulations are complied with.
Basic Qualifications:
Generally 0-3 years of related and recent experience in aeronautical environment.
High School or GED familiar
Knowledge of preparation and painting of aircraft, support equipment, and allied components.
Safety procedures for Chemicals handling.
Knowledge of blueprints and painting diagrams.
Strong ability on paint spraying
Understand technical management and quality assurance procedures.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State, and Federal regulations.
Must be able to be respirator qualified.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a recruiting professional directly, please call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35413
Job Location: Melbourne, FL
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Nicole Taylor
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 3

Description:
Inconen is looking for an Aircraft Performance Software Developer 3 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14929
Job Location: Savannah, GA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 4

Description:
Inconen is looking for an Aircraft Performance Software Developer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14930
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 4

Description:
Unique Skills:
Preference will be given to:

• Candidate with Computer Science degree with some exposure to aerospace, or
• Candidate with Aerospace degree with advanced programming skills
• Advanced programming skills and experience with various programs including Matlab, Python, C, C++
• DO-178 experience highly desired

Preferred but not required:

• EFB, SCAP experience
• Aircraft Performance background
• Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Company's products and services.

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 163443
Job Location: Savannah, GA
Rate: $65.00 - $72.00 Per Hour
Per Diem: Possible
Overtime: Possible
Duration: Open End Contract
Start Date: ASAP
Input Date: 04/07/2021
Last Updated: 05/18/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Powerplant Systems Integration Engineer - China

Description:
Aircraft Powerplant Systems Integration Engineer - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Powerplant Systems Integration Engineering.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Proficient in civil aircraft engine design and power plant system integration technology.
  • More than 10 years in the field of civil aircraft power plant system .Working experience in other large engine or aircraft design institutes.
  • Good communication and expression skills.
  • Good team work spirit.
  • Proficient in English listening, speaking, reading and writing.
  • Degree Qualified or Doctorate.
 

.Role and Duties:
 
  • Proficient in civil aviation engine development requirements, development process and main design indicators, lead the team to improve the overall understanding level of engine and engine matching design ability.
  • Proficient in power plant system integration, have rich model experience, lead the team to define and improve the R & D process of power plant system.
  • Organize and sort out the key core technology of power plant system integration and formulate the research plan, lead the team to improve the power plant system integration ability.
  • Participate in the evaluation of potential suppliers of the aircrafts power plant and nacelle, and formulate technical specifications for engine selection.
  • Participate in the formulation of overall technical scheme, technical specification and technical index of the aircrafts power plant and nacelle.
  • Participate in the aircrafts project nacelle and aircraft engine interface definition scheme.
  • Take the lead in solving the technical problems of flight test and forensics for the designated aircrafts power plant system.
Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Full Time employment.

 
Job Number: BH-349
Job Location: China, China
Rate: Salary + Expenses , Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sealing Integration Engineer - China

Description:
Aircraft Sealing Integration Engineer - China.
Fixed Term Contract Basis, Full or Part Time.



Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Sealing Technology and Integration. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
  • More than 20 years working experience in aviation seal research and development.
  • Familiar with aviation sealing products.
  • Excellent standard of English.

Job Description:
  • Definition of aircraft sealing requirements.
  • Decomposition of key sealing technologies.
  • Seal verification of core equipment.
  • Aircraft pneumatic seal verification.
  • Integrated verification of aircraft fire protection, air tightness and oil tightness.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
 
Job Number: BH-308
Job Location: Shanghai, China
Rate: Good Salary and Benefits - Negotiable
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 11/14/2020
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Specific Risk Analysis Engineer - China

Description:
Aircraft Specific Risk Analysis Engineer - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Specific Risk Analysis.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:

 
  • More than 10 years of working experience in ARP4761 based aircraft safety assessment and airworthiness verification.
 
  •  Has rich practical experience in PRA, especially tire burst and RAT blade off, PRA, such as rear pressure frame rupture and tail scrape, as well as the system viability and single event effect.
 
  • Degree qualified or Doctorate.
 
  • Have strong simulation modelling ability, be good at using simulation model to analyse and verify specific risk projects, improve design and optimize test scheme.
 
  • Have certain team leadership skills, be able to lead the team to solve the difficult problems of model specific risk analysis.
 
  • Good command of English listening, speaking, reading and writing.

Role and Duties:
 
  • Engaged in aircraft level specific risk analysis and research, output specific risk solutions, analysis specifications, simulation models, and enhance professional core competence.
 
  • Assist the model chief engineer to tackle major problems of specific risks in model projects.. Key technology research, promote the closure of model specific risk analysis projects.
 
  • Support and improve the existing aircraft level safety work system, specifications, technical solutions and other professional technology construction.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 
Job Number: BH-340
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Standard Electronic Parts Design Specialist - China.

Description:
Aircraft Standard Electronic Parts Design Specialist -  China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Standard Electronic Parts Design and Engineering.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • With international well-known enterprises, institutions or universities working experience, with a Doctorate degree is preferred in  computer science and technology, control science and engineering, communication engineering, electronic information engineering, automation .
  • More than 10 years working experience in the following areas: Design, development, application and integration of avionics products for civil aviation.
  • Reliability design of avionics in civil aviation.
  • Management of electronic components of airborne equipment.
  • Design, simulation, verification and application of electronic components.
  • Proficient in electronic and electrical, signal processing, automatic control principle and other aspects of professional knowledge.
  • Solid foundation of electronic components, familiar with brand, principle, material, parameter and application of components, able to provide support for design and selection.
  • Have knowledge of electronic components reliability verification planning and failure analysis.
  • Good computer skills, communication skills, logical thinking ability, analytical ability and oral ability.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:

 
  • Engaged in the management procedure of electronic components of Chinese commercial aircraft borne system / equipment.
  • Construction and evaluation of product system and verification system.
  • Build electronic component management and control system of airborne system / equipment supplier and carry out corresponding evaluation.
  • Carry out the construction of the specification system framework for electronic components of airborne equipment.
  • Construct the reliability model and database of electronic components of airborne equipment .Application control and airworthiness compliance of electronic components of airborne equipment.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
 

 
Job Number: BH-356
Job Location: China, China
Rate: Salary + Expenses , Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Crashworthiness Design Specialist - China.

Description:
Aircraft Structural Crashworthiness Design Specialist - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Structural Crashworthiness Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 20 years working experience in structural impact simulation analysis.
  • Proficient in aviation structure impact dynamics theory and test method.
  • Proficient in explicit finite element analysis algorithm and program development.
  • Working experience in international Aerospace Companies.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
 
  • Research on impact failure constitutive model of metal and composite materials.
  • Experimental study on impact dynamic properties of metal and composite materials.
  • Development of constitutive model program.
  • Development of explicit structural impact analysis algorithm.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-358
Job Location: China, China
Rate: Salary + Expenses , Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Datum and Stiffness Design - (Loads and Aeroelasticity) - China.

Description:
Aircraft Structural Datum and Stiffness Design ( Loads and Aeroelasticity) - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Structural Datum and Stiffness Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 10 years working experience in aircraft load / stress calculation.
  • Experience in load calculation and load distribution.
  • Experience in static aeroelastic design and flutter design;
  • Proficient in Patran / NASTRAN software.
  • Good command of English listening, speaking, reading and writing.
  • Degree or Doctorate qualified.
  Role and Duties:
 
  • Top level planning of aircraft stiffness design in the whole life cycle of each model.
  • The confirmation and verification of aircraft stiffness design requirements, the design of aircraft target stiffness, the research of frontier technology in the field of stiffness design, the formulation of relevant standards / specifications / and the teaching of past knowledge.
  • The design of the target stiffness index of each component; the coupling loading of the whole aircraft aerodynamic load and structural load; the calculation processing of the whole aircraft aerodynamic load; the calculation processing of the whole aircraft structural load; the sensitivity analysis of the static aeroelastic energy and the stiffness parameters; the sensitivity analysis of the flutter performance and the stiffness parameters.
  • Top level planning of aircraft structural benchmark design in the whole life cycle of each model; confirmation and verification of aircraft structural benchmark design requirements , aircraft structural benchmark design, research on cutting-edge technology in the field of structural benchmark, formulation of relevant standards / specifications / and teaching of post knowledge.
  • Analysis of force transfer route and load of aircraft stage.
  • Aeroelastic and flutter design of aircraft.
  • Conversion and loading from aerodynamic load to structural finite element load.
  • The finite element models (static model, flutter fishbone model and static aeroelastic fluid structure coupling model) are established and analysed.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 

 
Job Number: BH-357
Job Location: China, China
Rate: Salary + Expenses , Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Installers

Description:
STS Technical Services is hiring Aircraft Structural Installers in Huntsville, Alabama. 

Duties & Responsibilities:
Installs units, parts, equipment, and components in structural assembly, according to drawings and specifications, using hand tools and power tools.
Educational Requirements:
HS or GED equivalent- Required
FAA A&P or appropriate military occupational specialty training - required
Experience Needed:
5 years’ experience
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36560
Job Location: Huntsville, AL
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Anthony Mengarelli
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Mechanics

Description:
STS Technical Services is now hiring Aircraft Structures Mechanics in Oscoda, Michigan.

Job Description:

The Aircraft Sheet Metal Mechanic repairs, fabricates, modifies, and installs sheet metal parts, items, and assemblies. Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, knowledge of tools and equipment required in the sheet metal trade, and knowledge of shop mathematics and principles.

Job Responsibilities:
Shoot and buck rivets to specifications following FAA guidelines
Recognize differences in types of metals including structural strength and thickness
Perform sheet metal bends to guidelines and specifications as dictated in normal aviation practices
Remove existing rivets from aircraft structure
Work with and around a variety of chemicals and follow all OSHA standards in regards to PPE
Build components for aircraft applications using a variety of sheet metal materials
Make decisions regarding how to make repairs and know what repairs can and can’t be done
Understand and apply FAA standards
Read blueprints to ensure build and modification completion, follow both written and verbal instructions
Effectively document job completion paperwork
Other duties as assigned
Job Requirements:
Valid FAA Airframe & Powerplant license strongly preferred
Previous experience working with sheet metal, or completion of a technical school program in a similar field of study
Must provide own tools
Ability to use and effectively manager ERP program, time clock and company intranet
Manage time to effectively meet company priorities
Abilities:
Crawl in and out of tight spaces
Lay in a prone position for more than 4 hours
Comfortably work at elevated heights of at least 40 feet for extended periods of time
Lift balance, and carry 50 lbs.
Work in enclosed hangars and exterior weather conditions
Work in close proximity to other people
Benefits:
A $500 referral bonus if your referral works at least 60 days
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your backyard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36331
Job Location: Oscoda, MI
Input Date: 05/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Amber Mallak
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector

Description:
Inconen is looking for an Airworthiness Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Four (4) years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Communicates with management as required to identify work assignments and delivery schedules. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval. 4. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 5. Performs other duties as required.

Other Requirements: 1. Strong written and verbal communication skills. Must be able to prioritize tasks. 2. Strong computer skills. 3. Must be able to work all shifts. 4. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 14975
Job Location: Savannah, GA
Rate: $29.13 - $32.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/02/2021
Last Updated: 05/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr. (2nd Shift)

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Must have A & P license and prior A/C inspection experience

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years’ experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 14996
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/10/2021
Last Updated: 05/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog / Digital Design Engineer

Description:
• The Analog / Digital Design Engineer will have experience as a hybrid discipline with expertise on both the digital and analog side of design. This role plays a part on design teams and design architectures for low and high-power control electronics, motor control electronics and power management systems.
• Moog Aircraft Analog / Digital Design Engineers require not only state of the art electronics design know-how but also experience designing for requirements such as: high shock and vibration, thermal management with extreme external temperature variation, high voltage, altitude variation, failure mode mitigation and arc threat management, minimized weight, robust packaging, long life and a low recurring cost.
• Responsible for not only the technical solution but also meeting recurring and non-recurring cost targets.
• This role will be interacting not only with the design engineering team, but other disciplines such as program management, system engineering, actuation engineering, safety and reliability, product engineering and others. Leadership skills are a must.

Bachelors of Science Degree in Electrical Engineering
• Master's Degree in Electrical Engineering or related technical field is preferred
• 8+ years of relevant experience in a design environment is required
• Experience in low voltage analog design.
• Experience in high speed digital logic circuits including FPGA, ASICS and DSP.
• Experience in circuit level design and adherence to military design guidelines.
• A military/aerospace background and familiarity with the design life cycle including design, qualification and certification of electronics for aircraft applications is desired.
• Familiarity with CCA Level design / Verification & Validation / Risk reduction efforts
• The position may require a low amount of domestic travel (up to 3 times per year)
 
Job Number: 82873
Job Location: East Aurora, NY
Rate: 60.00
Per Diem: No
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 04/21/2021
Firm Name: MOTIVE WORKFORCE SOLUTIONS
Attention: Kristan Anderson
Address: 5122 BOLSA AVE STE 112
City, State: HUNTINGTON BEACH, CA 92649
Phone: 714/901-3804
Fax Phone: 714/901-3814
Website: www.2roads.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Inconen is looking for a Avionics Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
1. Integrated Modular Avionics experience required
2. Requirements development, integration, testing, supplier management experience required
3. Aircraft testing, troubleshooting experience preferred
4. ARP-4754 experience preferred

Education and Experience Requirements:
Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2.Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12860
Job Location: Savannah, GA
Rate: $65.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 01/26/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System with embedded DO-178 software Engineer

Description:
Position Requirements:
Experience with embedded software development.
Preference will be given for additional work in flight controls and/or avionics, embedded software development, and testing.

• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with software Configuration Management
• Experience with Primary Development Environment:
o MathWorks MATLAB / Simulink
o C/C++ code
o C# test scripts
 
Job Number: TX9851
Job Location: FT Worth, TX
Rate: 55-70hr.
Per Diem: offered
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 04/27/2021
Last Updated: 09/10/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician IV

Description:
An Avionics Technician IV job in Louisville, Colorado is currently available through Belcan. You will be responsible for using your skills and expertise to perform a variety repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will need an High School Diploma and +10 years of Avionics equipment repair experience in Satellite/Aerospace/Aviation/Defense equipment.

JOB DUTIES:
* Leads a group through the build and test processes to support production efforts
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers
* Works with the program team to support the production schedules
* Performs wiring harness routing and installation in confined spaces following specified procedures
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards
* Tests electrical assemblies by manual and automated means
* Assists engineering with performing tests, collection of test data, troubleshooting, and assessing the manufacturability of new cabling designs
* Performs basic mechanical and electrical removals and installations
* Performs and documents all work according to established company processes
* Observes all safety precautions when working with ESD sensitive hardware

REQUIREMENTS:
* +15 years of Avionics Experience
* HS Diploma min
* Modifications, Repairs, Assemblies
* Avionics Installation, tooling, wiring, wiring repair, soldering, crimping
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Rate: Up to $36/hr DOE

If you are interested in this Avionics Technician IV job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.




 
Job Number: 312221
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/04/2021
Last Updated: 07/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer Degree Required

Description:
We have multiple positions open for Aircraft CREO Design Engineers. Degree Required
 
Job Number: TG/ CREO
Job Location: Kent, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LY
Start Date: ASAP
Input Date: 04/20/2021
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Todd Gerber
Address: 8000 S CHESTER ST SUITE 150
City, State: CENTENNIAL, CO 80112
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Prepares, develops, and reviews complex certification plans describing the project scope, certification deliverables, means of compliance, and test/conformity requirements. 2. Coordinates with ODA Unit Members to resolve issues with certification deliverables and 8100-9 finding. 3. Reviews TIA pre-requisites, drafts TIA, and creates problem reports memo. 4. Independently prepares Summary Compliance Reports for complex projects. 5. Responsible for tracking project task assignments, status, and estimated complete dates as assigned. 6. Recommends improvements to existing processes.
Unique Requirements:
1. Knowledge of phases of TC, post-TC and STC certification projects, and the associated FAA Orders and Policy 2. Knowledge of Part 25 regulations, how those regulations drive design and system redundancy requirements, and the supporting regulatory guidance material 3. Understanding of software assurance and complex hardware requirements and applicability to aircraft systems 4. Experience determining appropriate means of compliance 5. Understanding of certification testing process and deliverables 6. Understanding of airworthiness limitations and associated regulations and operating requirements.
 
Job Number: 21-161863
Job Location: WI
Per Diem: Up to $70.00 per hour
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/03/2021
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer Contract position is for the Completions Certification Engineering Group. This group supports completion related activities for new designs of interior furnishings and amenities as part of outfitting new Gulfstream aircraft along with supporting other Certification related activities. Must have a thorough working knowledge of Title 14 of the Code of Federal Regulations (14CFR - especially Chapter I, Part 25), as it pertains to Federal Aviation Administration (FAA) regulation procedures and the STC process as it relates to certification of Aircraft Interiors. Candidate should have experience creating certification documents such as ICAs, Ground/Flight Test Plans, Compliance Checklists, Project Specific Certification Plans, etc.
This position requires experience in program management, effective communication skills, and a demonstrated ability to coordinate Company certification programs for alterations and modifications.
Assignments are executed under the direction of the Certification Manager to meet the Engineering, Certification and manufacturing schedules. Additional responsibilities are outlined in the job description and as assigned.
 
Job Number: 21-164384
Job Location: WI
Rate: $70.00 per hour
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 08/24/2021
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - TS I - TC Programs

Description:
Inconen is looking for a Certification Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Job Responsibilities:
1. Prepares, develops, and reviews complex certification plans describing the project scope, certification deliverables, means of compliance, and test/conformity requirements.
2. Coordinates with ODA Unit Members to resolve issues with certification deliverables and 8100-9 finding.
3. Reviews TIA pre-requisites, drafts TIA, and creates problem reports memo.
4. Independently prepares Summary Compliance Reports for complex projects.
5. Responsible for tracking project task assignments, status, and estimated complete dates as assigned.
6. Recommends improvements to existing processes.

Unique Requirements:
1. Knowledge of phases of TC, post-TC and STC certification projects, and the associated FAA Orders and Policy.
2. Knowledge of Part 25 regulations, how those regulations drive design and system redundancy requirements, and the supporting regulatory guidance material.
3. Understanding of software assurance and complex hardware requirements and applicability to our aircraft systems.
4. Experience determining appropriate means of compliance.
5. Understanding of certification testing process and deliverables.
6. Understanding of airworthiness limitations and associated regulations and operating requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12862
Job Location: Savannah, GA
Rate: $55.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/27/2021
Last Updated: 08/12/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Inspector

Description:
Inconen is looking for a Certification Inspector for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
Must have A&P license and be able to get ODA IAR certifications for conformity and airworthiness function codes within 6 months of hiring

Education and Experience Requirements:
High School Diploma or GED required. Seven (7) years aircraft inspection experience to include three (3) years inspection experience on large or mid-size aircraft (or same type and complexity as Gulfstream aircraft). Other Airframe and Powerplant (A&P) license preferred or must be able to obtain a Repairman Certificate required. ASQ certificate (American Society for Quality) preferred. Other Inspection Authorization (IA) preferred. preferred.

Position Purpose:
Performs certification inspections in a timely and efficient manner to ensure aircraft and/or component airworthiness. Physically inspects aircraft, components, and reviews related documentation to ensure workmanship meets acceptable standards of quality and that customer aircraft/components are returned to service in an airworthy condition with all required. documentation properly completed and filed. As an ODA Inspection Authorized Representative (IAR) or FAA Designee, works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/ODA requirements.

Principle Duties and Responsibilities:
Essential Functions: 1. Performs inspection and airworthiness inspection duties utilizing accepted/approved data including QC/QA procedures, instructions, and other related documents. Conducts first article inspections to ensure compliance with FAA and/or ODA approved procedures and ensures all associated records are properly completed. 2. Performs inspections and certifies acft/component as airworthy prior to delivery and Return to Service. 3. Issuance of FAA 8130-3 Forms in accordance with FAA/ODA requirements for authorized functions and activities to include conformity, prototype, export, in addition to 14 CFR Part 43 Return to Service activities. 4. As an IAR, plans and performs certification inspections to type design requirements in support of acft/component certification. 5. Continually monitors repair station compliance to the requirements of 14 CFR Part 145 and the FAA accepted site Repair Station and Quality Control Manuals. 6. Develops and approves acft log book entries relating to acft configuration and installations. 7. Performs FAA acft/component certification activities as an IAR. 8. If appointed as an IAR, manages Product/Article certification activities. 9. Provides technical support to inspection personnel in supporting the FAA and/or ODA documented requirements. 10. Supports the coordination of inspection workloads according to priorities, efficiency and cost effectiveness. Perform other duties as assigned.

Other Requirements: 1. Previous verifiable experience as a DAR/DMIR/ODAR/ODA-Unit Member in good-standing is highly preferred and may offset some or all of the experience requirements. 2. Competent in the use of all job related tools and equipment. 3. Proficient in blueprint/drawing reading, use/interpretation of Maintenance Manuals, CMP, ADTS, Travelers, Customer Bulletins, Airworthiness Directives, test specifications and other manufacturing and/or inspection related documentation as required. 4. Must possess verifiable working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. 5. Must possess a verifiable working knowledge of the FAA Regulations, Orders, and other guidance pertinent to issuance of export airworthiness approvals & conformity determination as defined in FAA Order 8100.8D Appendix A (as revised) and 8100.15 (as revised). 6. For postings supporting IAR activities, must be able to complete FAA/ODA initial/recurrent designee training within established timeframe to include obtaining a passing certificate as part of the IAR application process. 7. For postings supporting IAR activities, must be capable of obtaining IAR designee appointment within established timeframe depending on function code(s) required for position.
 
Job Number: 14976
Job Location: Savannah, GA
Rate: $36.55 - $40.61/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/02/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Aircraft Layout Design - China.

Description:

Civil Aircraft Layout Design - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Civil Aircraft Layout Design.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • More than 10 years of experience in R & D of mainstream commercial aircraft systems layout, participating in or leading the whole process of iterative verification of layout scheme demonstration of multiple aircraft models.
 
  • Degree level or Doctorate.
 
  • Have in-depth research on advanced theories and methods of aircraft layout design.
 
  • Be familiar with the system layout method, process and specification, and understand the technical characteristics, installation requirements, operation and maintenance performance of system equipment from different suppliers.
 
  • Experience in airworthiness provisions, system survivability and compliance verification related to engine, APU or rat rotor burst.
 
  • Have excellent 3D digital prototype simulation modelling ability, be able to use simulation design means to carry out trade-off analysis, quantitative evaluation and fast iteration of the whole aircraft layout scheme.
 
  • With unique technological innovation ability, can enhance the professional technical ability of Client's programs.
 
  • Proficient in English listening, speaking, reading and writing;
 


Role and Duties:
  • The system architecture function of the whole System  is analysed, and the analysis information is implemented into the whole process of trade-off analysis, design, verification and iteration of equipment level layout scheme.
 
  • The theoretical research and engineering implementation of advanced technology of whole aircraft layout, including layout scheme trade-off analysis theory, simulation modelling and analysis method. Rapid layout design method, etc.
 
  • General layout and modular design and analysis training.
 
  • Enhance and innovate the core capabilities of aircraft level layout design technology system, theory, method, specification and process.
 
  • According to the business requirements of the general layout, the coordination principle of the top floor layout of civil aircraft, the division of the coordination area, the planning and layout of the main channel, the control of the separation surface, the subdivision, the modular design and manufacturing and other work coordination and research.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Part Time position as well as Full Time.
 
 
Job Number: BH-339
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 04/21/2021
Input Date: 04/22/2021
Last Updated: 06/18/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Commercial Aircraft Project Management Expert - China.

Description:
Commercial Aircraft Project Management Expert - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Commercial Aircraft Project Management.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Working experience in international Aerospace Companies, doctoral degree preferred, major in project management or aviation related.
  • Have more than 10 years of practical experience in large-scale scientific and technological equipment development project management, and have actually engaged in the planning, construction, evaluation and training of organization level project management system.
  • Engaged in project group management / project portfolio management, with cross project integration management related work experience.
  • Engaged in project management system document system, tools, software, methods, process template library establishment, evaluation, optimization and best practice case summary work.
  • With PMP / IPMP / valid certificate, familiar with project management in controlled environment (PRINCE2), successful project group management (MSP), relevant theories and best practices of project group management.
  • Good communication and cooperation skills, professional dedication.
  • Good command of English listening, speaking, reading and writing.

Role and Duties:

 
  • Responsible for planning and establishing the company  organization level commercial aircraft project management system, and carrying out top-level overall management and integrated management of the project.
  • Responsible for establishing the control system of access control process in the whole life cycle of commercial aircraft project.
  • Responsible for planning and establishing management system and document system related to commercial aircraft project group management and project portfolio management.
  • Responsible for organizing the evaluation and optimization of the company's project management system document system, tools, software, methods and process template library.
  • Responsible for organizing the evaluation and optimization of civil aircraft development project management standard specification system.
  • Responsible for organizing the establishment of project management best practice case base.
  • Responsible for the leading practice training related to project management.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-363
Job Location: China, China
Rate: Fixed Term Contract Salary + Expenses, Benefits.
Per Diem: --
Overtime: --
Duration: 1 - 3 years
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Commercial Aircraft System Engineering Expert - China.

Description:
Commercial Aircraft System Engineering Expert  - China.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Commercial Aircraft System Engineering.

This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Working experience in international Aerospace Companies, doctoral degree is preferred.
  • At least 5 years working experience in civil aircraft system engineering.
  • Ability and experience in drafting system engineering management plan (SEMP).
  • Experience in product development or technology management.
  • Familiar with civil aircraft development process.
  • Deeply participate in International Association of systems engineering and other activities, such as drafting relevant standards and specifications, making special reports, etc.
  • Good command of English listening, speaking, reading and writing.
Role and Duties:
 
  • Be responsible for guiding the research of system engineering theory and best practice at home and abroad, and participate in the drafting of relevant standards.
  • Responsible for leading the revision of the client's system engineering manual.
  • Responsible for researching the company's system engineering process, tools and methods, mbse, templates, checklists, etc.
  • Be responsible for guiding and coordinating the work interface among technical management, and promoting the integration of system engineering process, methods and tools with model R & D process.
  • Responsible for drafting system engineering management plan (SEMP) for each model.
  •  Be responsible for guiding the construction of system engineer team structure and specific qualification requirements, and guiding the development of relevant training materials.
  • Responsible for studying the implementation path and method of the concept of industrial chain supply chain system engineering.
  • Responsible for the integrity, rationality and efficiency of PLM platform requirements and functional architecture.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-364
Job Location: China, China
Rate: Salary + Expenses, Benefits
Per Diem: --
Overtime: --
Duration: 1 - 3 YEARS
Start Date: 04/20/2021
Input Date: 04/21/2021
Last Updated: 06/17/2021
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Interiors

Description:
Unique Skills:
• Capitol Harness &/or Mentorgraphics experience • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic • Familiarity in mechanical system design preferred. • Analyze Electrical designs in 3D models preferred. • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
Experience credit considered for related advanced degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services
Principle Duties and Responsibilities:

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 164791
Job Location: Savannah, GA
Rate: $60.00
Per Diem: Possible
Overtime: Yes
Duration: Open End Contract
Start Date: ASAP
Input Date: 03/23/2021
Last Updated: 05/10/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Support Project Specialist

Description:
Inconen is looking for a Customer Support Project Specialist for our client, a well known Aerospace Company, in Savannah, GA.

Unique Skills:
Aircraft experience is desired.
Data analysis experience (SQL, Python, R) is desired.

Education and Experience Requirements:
Bachelor's Degree in Program Management, Engineering, Finance or related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 years experience in A/C design, mfg or service and support, to include 3 years program management consisting of any combination of supervisory experience, complex program management, and/or technical experience.

Position Purpose:
Create and provide integrated plans for input to new products in development. Manages cross functional project teams that coordinates product development. Responsibilities include guiding and leading the team in achieving the goals of the project including issue identification, resolution and contingency planning.

Principle Duties and Responsibilities:
Essential Functions: 1. Assesses project issues and develops resolutions to meet productivity, quality and stakeholders goals and objectives. 2. Reviews, manages, proactively challenges, and controls status of projects operation of the programs and budgets 3. Manages schedules and prepare status reports. 4. Develops mechanisms for monitoring project progress and for intervention and problem solving with team members and line managers. 5. Acts as a liaison with alliance partners and thought leaders external to the company. 6. Interfaces with stakeholders to ensure requirements are met. 7. Analyzes program certification schedule and performance targets/guarantee progress. 8. Develops draft master schedules for new product development. 9. Monitors variance analysis to schedules and budgets for all projects to ensure desired savings/revenue are achieved. 10. Monitors quality, reliability and availability issues to ensure top drivers are identified and resolved.

Additional Functions: 1. Supports departments Intranet Web site and newsletters to maintain Technical and Program updates. 2. Support supplier design and program reviews to insure program deliverables, schedules and budgets are met. Perform other duties as assigned.

Other Requirements: 1. Requires a comprehensive knowledge of Aircraft Industry Production, Engineering, Quality, Completion, Material and Service Support Operations. 2. Requires a detailed understanding of Program/Project Management processes and procedures and an intimate understanding of in service A/C operations.
 
Job Number: 14978
Job Location: Savannah, GA
Rate: $45.32 - $50.35/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/02/2021
Last Updated: 05/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DCAS (Display and Crew Alerting System) design expert - Avionics - China.

Description:
DCAS (Display and Crew Alerting System) Design Expert - Avionics - China. Fixed term contract basis.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Avionics relating to DCAS on Civil Passenger Aircraft. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Minimum of 10 years technical experience with civil aircraft/avionics development diagrams.
  • Bachelors degree in aerospace, electronic or computer engineering.
  • Knowledge of relevant regulations and industry standards?ARP-4754A, AC25-11B, DO-160, DO-178B, DO-254).
  • Familiar with ISOGraph, RAM Commander,Relex etc. safety analysis tools.
  • Good command of English.


Job Description:
  • Provide technical direction on DCAS Architecture and RMST (Reliability, maintainability, Safety and testability) design.
  • Provide technical direction on Certification activities planning for display system, flight crew alerting system, flight vision system. Establish test environment and coordinate with authorities.
  • Participation requirements definition and system integration.
  • Participation and monitor the whole life cycle of DCAS supplier and product.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
    


     
    Job Number: BH-307
    Job Location: Shanghai, China
    Rate: Good Salary and benefits - negotiable
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 10/01/2020
    Input Date: 11/14/2020
    Last Updated: 06/25/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Demand and Requirements Management Planning - Civil Aircraft - China.

    Description:
    Demand  and Requirements Management Planning - Civil Aircraft - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Demand  and Requirements Management Planning.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:

    • Have rich experience in requirements management of large civil aircraft or airborne products (15 years or above in related fields), and be proficient in the method and process of requirements management of large civil aircraft.
    • Have the ability to lead the team to develop business requirements of requirement management platform and tools according to project requirements.
    • Familiar with the information architecture of large civil aircraft requirements at all levels.
    • Master the methods and skills of aircraft level requirement definition and validation.
    • Proficient in IBM Rational doors and its secondary development language DXL, with relevant tool development experience.
    • Proficient in English listening, speaking, reading and writing.
      Role and Duties:

    • Requirement management planning and tool business requirements preparation
    • Support the improvement, validation and validation of aircraft requirements as experts
    • Participate in team decision making and provide support and collaboration to the team

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Part Time position as well as Full Time.
     
     

     
     
    Job Number: BH-337
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/21/2021
    Input Date: 04/22/2021
    Last Updated: 06/18/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer- Job ID 45311

    Description:
    We have an Excellent Contract position for a Design Engineer to join a leading Company located in Huntington Beach, CA, area.

    Create designs of aircraft interior products ranging from but not limited to: bins, galleys, lavatories, or ceiling panels used in commercial and private aircraft using a computer-aided drafting system and support existing designs of products that are manufactured on-site. While creating new designs, considerations of certification, composites/general material selection due to weight restrictions in aircraft, and ease of manufacturing are necessary. Product designs range from basic interior products used in regional aircraft and commercial airlines to first-class and high-end private jets products.

    Responsibilities:
    Produce innovative, intelligent designs for production in a timely manner with respect to the project schedule while optimizing ease of manufacturing, cost, weight, and function.
    Design to mandatory regulatory requirements, customer and company specifications.
    Apply The Companies & Structures’ engineering standards as established in CDE1000, with emphasis on Sections 2, 3, 4, 7, and 10.
    Produce accurate 3D models, preliminary layouts, production details, and assembly drawings while meeting drawing release dates.
    Prepare drawings and other engineering data required for the manufacturing of the product and data submittal to the customer.
    Produce ECNs (Engineering Change Notice) as required to support manufacturing, customers, quality, and certification.
    Release 3D models and drawings, maintaining data integrity according to CDE1002 and CDE1004.
    Act as a shop liaison during initial production of new product designs to prevent and/or solve any engineering issue that may arise.
    Identify problems and develop solutions.
    Collaborate with Supply Chain to examine supplier.

    Qualifications:
    Sound understanding of mechanical systems, the strength of available materials, and manufacturing processes (composite experience is a plus).
    Basic understanding of tolerances and their implications
    Basic understanding of airframe environment, interfaces, airworthiness, and regulatory requirements for passenger aircraft;
    MS Windows.
    Basic knowledge of Microsoft Office (Word, Excel, PowerPoint, Outlook)

    Preferred Qualifications:
    Aeronautical or Mechanical Engineering is preferred.
    CATIA V5, SmarTeam is preferred.
    AutoCAD is useful.

    Basic Hiring Criteria:
    1-2 years of engineering experience.
    BS Engineering/Science OR 2-Yr Technical degree with 2-3 Yrs experience in design engineering
     
    Job Number: 45311
    Job Location: Huntington Beach, CA
    Rate: 44.50
    Per Diem: NO
    Overtime: YES
    Duration: 12 Month+
    Start Date: ASAP
    Input Date: 04/29/2021
    Last Updated: 05/17/2021
    Firm Name: TAD PGS INC
    Attention: Maria Gomez
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 657/250-1893
    800 Phone: 800/261-3779
    Website: www.tadpgs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EPS Engineer

    Description:
    Description:
    Engineers in this role are responsible for providing physical review and technical support to Textron Aviation product lines, suppliers, and other engineering groups to resolve manufacturing nonconformances. Engineers will analyze nonconformances, design deviations, and write repair dispositions on production aircraft. Those solutions focus on design integrity, ensuring aircraft reliability, serviceability, and maintaining certification requirements. MRB Engineering is the operational function.
    This position is primarily a standard first shift position with the potential to require some evening/weekend shifts.

    Minimum Requirements:
    I. Review part/assembly nonconformance rejections; develop repair design/action using appropriate analysis.
    II. Develop and write engineering disposition repair instructions.
    III. Troubleshoot and resolve operational/performance issues with propeller and jet powered passenger aircraft.
    IV. Answer drawing/specification interpretation questions and provide general engineering support to production personnel.
    V. Responsible for adhering to company MRB and QA procedures.
    VI. Additional duties as defined by department management.
    VII. Perform Quality System data analysis and documentation in support of sustaining designs.
    VIII. Coordinate within Engineering Production Support, Supply Chain, and technical groups to develop technical resources for team usage.
    IX. Must be self-motivated and demonstrate a strong ability to complete tasks in a timely manner without direct supervision.
    X. Participate in the development and improvement of processes and tools throughout company.

    • Bachelor’s degree required in, Aerospace Engineering, Mechanical Engineering
    • 5+ years’ relative technical and engineering experience is required
     
    Job Number: 11790986
    Job Location: Wichita, KS
    Rate: $60.00
    Per Diem: Possible
    Overtime: Possible
    Duration: One year
    Start Date: ASAP
    Input Date: 04/06/2021
    Last Updated: 05/18/2021
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Kerry Moreland
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Aircraft Interiors Engineer with Mentorgraphics

    Description:
    ===========================================
    Engineer Contractor 3 - Electrical Interiors in Savannah, GA
    Unique Skills:
    • Capitol Harness &/or Mentorgraphics experience
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    • Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
    • Familiarity in mechanical system design preferred.
    • Analyze Electrical designs in 3D models preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
    • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
     
    Job Number: PL Elec Interiors
    Job Location: Savannah, GA
    Rate: $60-65/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2-3 weeks
    Input Date: 03/23/2021
    Last Updated: 02/10/2022
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Sr. Recruiter
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Eng. Contractor 4: Electrical Engineer, Completions

    Description:
    Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
    1) Catia V5 experiences a preference.
    2) 14 CFR 25 Subpart H - EWIS based design experience a must.
    3) Completions electrical system design experience preferred.
    4) Part 25 Certification experience for cabin interiors preferred.
    5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    6) Experience with power distribution, lighting, switching, and harness routing required.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.
    9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
    10) Makes technical decisions and provides recommendations demonstrating leadership authority.
    11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
    12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
    13) Develops standards and guides for diverse engineering activities.
    14) Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12828
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 07/22/2021
    Last Updated: 11/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - ECU and LRU Design

    Description:
    ABOUT THE JOB:
    Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

    REQUIRED SKILLS:
    • Bachelor’s degree in Electrical Engineering
    • 5+ years Aerospace circuit design experience
    • Control systems and/or supporting component hardware design experience
    • Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
    • Experience developing hardware requirements from system requirements and managing those requirements
    • Engines/Propulsion, APU, or Flight Controls experience
    • Schematic capture
    • In-depth circuit analysis and simulation
    • DOORS proficiency
    • Effective communication skills (both verbal and written)
    • Self-motivated, accountable, detail-oriented

    PREFERRED SKILLS:
    • Engine ECU and LRU familiarity

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: TBD
    Start Date: ASAP
    Input Date: 08/06/2021
    Last Updated: 09/24/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer 4

    Description:
    An Electrical Engineer 4 role located in Kirkland, WA is currently available through Belcan. The Electrical Engineer 4 will Perform the engineering development and associated support of contracted programs, Bid and Proposals and Internal Research and Development activities. Assist in new business development and follow on activities. This is a senior job level requiring leadership, strong technical skills, mentoring skills and good presentation skills. Having wide-ranging experience, uses professional concepts and company objectives to resolve complex issues. Independently applies a high degree of creative ability, engineering skill and judgment in applying engineering principles.

    Electrical Engineer 4 duties:

    * Contribute to and complete development projects on a mutually agreeable budget and schedule.
    * Conduct trade studies to determine optimum approach, develop new and improve existing
    technologies, recommend standard topologies for specific applications
    * Responsible for the technical aspects of design and development of power supplies and USB OUs
    for commercial aircraft.
    * Resolve technical problems with a high degree of analytical expertise and originality and drive
    problems to resolution.
    * Prepare and present analyses and technical rationales for your designs at internal and external
    reviews.
    * Experience in meeting DO-160, Boeing, and Airbus requirements and development and support
    of test procedures/reports
    * Experience using OrCAD, SPICE, and SABER software.
    * May provide EE team leadership on a product development or research project.

    EDUCATION AND EXPERIENCE REQUIRED:

    * Electrical engineering background with a BSEE degree.
    * Demonstrates proficiency in the essential functions of the role, typically obtained with 7 years of
    direct experience in power supply design.
    * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
    lawfully admitted into the U.S. as a refugee or granted asylum.
    * Switched mode power conversion product design and development with responsibility for taking a design from requirements through production is a must have experience

    If you are interested in this Electrical Engineer 4 role located in Kirkland, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age. wst160

     
    Job Number: 308767
    Job Location: Kirkland, WA
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 01/23/2021
    Last Updated: 05/20/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Eng/Secondary Structure (4 needed)

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Unique Skills:
    • Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    • Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    • Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical workbench is necessary
    • Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects .
    • Provides specialized technical assistance to team members.
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
    • Determines and develops own approach to solutions within schedule and cost objectives .
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
    • Acts as liaison with representatives outside of the assigned group/area .

    Additional Functions:
    • Actively works to improve daily processes and ensures all work meets customer requirements .
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
    • Perform other duties as assigned.
     
    Job Number: 24-523
    Job Location: Savannah, GA
    Rate: $66-70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 12/06/2021
    Last Updated: 02/08/2022
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer - Secondary Structures

    Description:
    Inconen is looking for a Electrical Harness Installation Engineer - Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

    Unique skills:
    1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    5. Aerospace Experience is required
    6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    8. Knowledge of Catia V5 Electrical workbench is necessary
    9. Knowledge of Catia V5 Sheetmetal workbench is necessary

    Education and Experience Requirements:
    1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15220
    Job Location: Savannah, GA
    Rate: $66.00 - $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/11/2022
    Last Updated: 02/09/2022
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Power Design Engineer

    Description:
    The Electrical Power Design Engineer will have significant experience as a Power Design role on design teams and design architectures for low and high-power supplies, motor drives, and power management systems.
    • Moog Aircraft Power Design Engineers require not only state of the art electronics design know-how but also experience designing for requirements such as: high shock and vibration, thermal management with extreme external temperature variation, high voltage, altitude variation, failure mode mitigation and arc threat management, minimized weight, robust packaging, long life and a low recurring cost.
    • Responsible for not only the technical solution but also meeting recurring and non-recurring cost targets.
    • This role will be interacting not only with the design engineering team, but other disciplines such as program management, system engineering, actuation engineering, safety and reliability, product engineering and others. Leadership skills are a must.
    Bachelors of Science Degree in Electrical Engineering
    • Master's Degree in Electrical Engineering or related technical field is preferred
    • 8+ years of relevant experience in a design environment is required
    • Experience designing custom low and high-power supplies and filters.
    • Experience designing custom power drive electronics (exceeding 10kW).
    • Experience designing custom magnetics.
    • Familiarity / Experience with conducted emissions and susceptibility
    • A military/aerospace background and familiarity with the design life cycle including design, qualification and certification of electronics for aircraft applications is desired.
    • The position may require a low amount of domestic travel (up to 3 times per year)
     
    Job Number: 82872
    Job Location: East Aurora, NY
    Rate: 60.00
    Per Diem: NO
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: MOTIVE WORKFORCE SOLUTIONS
    Attention: Kristan Anderson
    Address: 5122 BOLSA AVE STE 112
    City, State: HUNTINGTON BEACH, CA 92649
    Phone: 714/901-3804
    Fax Phone: 714/901-3814
    Website: www.2roads.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Technician - Test Facility

    Description:
    ABOUT THE JOB:
    This position is part of a team that supports testing highly complex turbine engine products. The Electrical Technician is responsible for fabricating, maintaining, and testing electrical systems and components to support the development and certification of gas turbine aircraft propulsion engines.

    REQUIRED SKILLS:
    • Associate in Science degree in Electrical Technology or equivalent experience.
    • Minimum 7 years of Electrical Technician experience.
    • Ability to read and interpret electrical drawings.
    • Experience working from layout drawings, wire lists and schematics.
    • Experience with fitout from utility and control system drops to motors, pumps, actuators, etc.
    • Experience with 3-phase power and its distribution in a test facility.
    • Experience in testing, troubleshooting and repairing electrical equipment.
    • Experience with ordering components used in fabrication of wire harnesses, interface (Bud) boxes, etc.
    • Experience fabricating wire harnesses.
    • Experience installing wire harnesses for wiring control systems / PLCs to peripheral devices such as temperature sensors, speed sensors, actuators, etc.
    • Experience fabricating interface boxes for signal breakout, signal interconnection, etc.

    PREFERRED SKILLS:
    • Experience in the Aerospace Industry mechanical testing environment.
    • Experience with AutoCad or AutoCad Electrical.
    • An understanding of mechanical systems, such as valves, load banks, and dynamometers.

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: Straight Time
    Duration: 12-18 months
    Start Date: ASAP
    Input Date: 05/27/2021
    Last Updated: 06/09/2021
    Firm Name: REAL TIME CONSULTING
    Attention: Kathy Heath
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electromagnetic Environment Effects (E3) Protection Engineer - China.

    Description:
    Electromagnetic Environment Effects (E3) Protection Engineer - China.


    Our Aerospace Client based in China is looking for additional Engineering Support . They require an Electromagnetic Environment Effects (E3) Protection Engineer for Design and Verification.

    This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

    Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.


    Responsibilities:

    • Instruct team members on the review of documents about equipment/system level Indirect Effects of Lightning(IEL)/High Intensity Radiated Fields(HIRF)/EMC compliance verification.
    • Instruct the documentation and verification of system level IEL/HIRF tests.
    • Lead the team to conduct troubleshooting of electromagnetic interference onboard.
    • Instruct aircraft level lighting/HIRF/EMC test verification.
    • Compile aircraft level E3 design requirements.
    • Instruct aircraft level EMC/HIRF/IEL simulation and calculation.
    • Establish aircraft level E3 design and verification procedure.

    Skills/ Qualifications / Experience Sought:
     
    • 10+ years' experience in E3 protection design and verification of aviation field and rich experience in type certification.
    • Experience in system level lightning and HIRF verification.
    • Experience in aircraft level E3 design requirement; intensive study in aircraft electromagnetic protection technique.
    • Experience in electromagnetic protection for composite fuselage.
    • Education background in EMC, electromagnetic field and microwave, electronic engineering or other relevant subjects.
    • Familiar with relevant design method and procedure of electromagnetic protection for composite material aircraft. Participated in electromagnetic protection design of relevant type. Civil aircraft project is preferred.
    • Familiar with airworthiness regulations of E3 for civil aircraft. Full participation in the type certification credit procedure desired.
    • Master EM simulation and have experience of aviation program are preferred.
    • Good communication and written skills in English.

    • Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

     
    Job Number: BH-369
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/22/2021
    Input Date: 04/23/2021
    Last Updated: 06/21/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer

    Description:
    Description:

    Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.

    • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.

    • Perform formal software development through design for requirements and requirements verification with C/C++ code and Math Works toolsets

    • Develop and update requirements and verification traceability

    • Conduct software integration and testing on target hardware

    • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results

    • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment

    • Participation in development of subsystems architecture, redundancy management



    Education Requirements:

    • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.

    • Master’s Degree in the Engineering disciplines mentioned above is suggested



    Position Requirements:

    • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in flight controls and/or avionics, embedded software development, and testing.

    • Experience with DO-178 Level A software or other embedded software development and testing is required.

    • Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems

    • Experience with software Configuration Management

    • Experience with Primary Development Environment:

    Math Works MATLAB / Simulink

    C/C++ code

    C# test scripts

    Serena Dimensions / PVCS

    Embedded Software Development environments
     
    Job Number: 35254
    Job Location: Ft. Worth, TX
    Input Date: 04/28/2021
    Firm Name: BRAVOTECH
    Attention: Sandy Singh
    Address: 18111 PRESTON RD STE 630
    City, State: DALLAS, TX 75252
    Phone: 903/815-1590
    Website: www.bravotech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer (Flight Controls)

    Description:
    804 Technology is currently looking for an Embedded Software Engineer (Must have Flight Controls Experience) for a long term contract job opportunity located in Fort Worth TX. The Embedded Software Engineer will design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254. System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification. Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

    Pay: $70-75/hour based on experience and Per Diem is available to those that qualify.
    Location: Fort Worth TX 76118

    Thank you in advance for your time.

    Brian Smith
    314-753-5299
    bsmith@804technology.com
    Description
    • Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
    • System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
    • Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
    • Develop and update requirements and verification traceability
    • Conduct software integration and testing on target hardware
    • Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
    • Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
    • Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

    Education Requirements:
    • Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
    • Master’s Degree in the Engineering disciplines mentioned above is suggested

    Position Requirements:
    • Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
    • Experience with DO-178 Level A software or other embedded software development and testing is required.
    • Familiarity with RTCA DO-178, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
    • Experience with Primary Development Environment:
    • MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
    o C/CC++ code
    o C# test scripts
    o Serena Dimensions / PVCS
    Embedded Software Development environments

    I am currently working remotely. You can reach me in a variety of ways:
    Be safe and stay healthy out there. We are in this together!

    Brian Smith
    Email: bsmith@804technology.com
    Cell: 314-753-5299
    Business: 636-928-0330 (forward message to my email)
    Fax: 636-928-0348

    Brian Smith
    804 Technology
    Recruiting Director
    O. 636-928-0330
    F. 636-928-0348
    C. 314-753-5299
    bsmith@804technology.com
    www.804technology.com

    804 Technology is an equal opportunity employer.
    All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
     
    Job Number: Embedded Soft 804
    Job Location: Fort Worth, TX
    Rate: $70-75/hour
    Per Diem: Split
    Overtime: yes
    Duration: 9 mos plus
    Start Date: ASAP
    Input Date: 06/11/2021
    Firm Name: 804 TECHNOLOGY
    Attention: Brian Smith
    Address: 5381 HIGHWAY N STE 201
    City, State: COTTLEVILLE, MO 63304
    Phone: 636/928-0330
    Fax Phone: 636/530-3693
    Website: www.804technology.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Eng. Contractor 3: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15036
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 10/06/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Eng. Contractor 4: Completions Electrical Interiors

    Description:
    Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**

    Unique Skills:
    1. Capitol Harness &/or Mentor Graphics experience
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
    3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
    4. Experience with systems development, layout, and logic
    5. Familiarity in mechanical system design preferred
    6. Analyze Electrical designs in 3D models preferred
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    1. Catia V5 basic navigation experience
    2. GV, GVI, & GVII electrical system design experience
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
    4. EWIS Certification familiarity & experience preferred
    5. Familiarity with aircraft STC procedures preferred
    6. Experience with electrical systems test plans and reports

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15037
    Job Location: Savannah, GA
    Rate: $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/13/2021
    Last Updated: 11/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Eng. Contractor 3: Certification

    Description:
    Inconen is looking for an Eng. Contractor 3: Certification for our client, a well-known Aerospace Company, in Appleton, WI.

    Unique skills:
    -Required This Certification Engineer Contract position is for the Completions Certification Engineering Group.
    -This group supports completion related activities for new designs of interior furnishings and amenities as part of outfitting new Gulfstream aircraft along with supporting other Certification related activities.
    -Must have a thorough working knowledge of Title 14 of the Code of Federal Regulations (14CFR - especially Chapter I, Part 25), as it pertains to Federal Aviation Administration (FAA) regulation procedures and the STC process as it relates to certification of Aircraft Interiors.
    -Candidate should have experience creating certification documents such as ICAs, Ground/Flight Test Plans, Compliance Checklists, Project Specific Certification Plans, etc.
    -This position requires experience in program management, effective communication skills, and a demonstrated ability to coordinate Company certification programs for alterations and modifications.
    -Assignments are executed under the direction of the Certification Manager to meet the Engineering, Certification and manufacturing schedules.
    -Additional responsibilities are outlined in the job description and as assigned.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15000
    Job Location: Appleton, WI
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 07/07/2021
    Last Updated: 07/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Systems Integration - China

    Description:
    Aircraft Flight Controls Systems Integration - China.
    Fixed Term contract Basis.


    Our Aerospace Client in China requires additional support. for their current and future programs. They desire an Engineer or Specialist with strong experience In Flight Controls Systems Integration  relating to Civil Passenger Aircraft. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:

    • 10 years of engineering experience regarding to FCS integration.
    • The capability of system architecture development, system redundancy management including monitoring and voting is needed.
    • Bachelors Degree  or above.
    • Good command of English.

    Job Description:

    • To Perform FCS integration with the support of other team members, especially for system redundancy management including monitoring and voting.
    • To propose solution for technical issues regarding to FCS integration from our various aircraft programs.
    • To create methods, standards and specifications regarding to FCS redundancy management including voting and monitoring.


    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
     
    Job Number: BH-306
    Job Location: Shanghai, China
    Rate: Good Salary and Benefits - Negotiable
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/21/2021
    Input Date: 11/14/2020
    Last Updated: 06/18/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Line Technician

    Description:
    Position: Flight Line Technician
    Location: Mesa, AZ (85215)
    Duration: Long Term Contract

    Indotronix is seeking Flight Line Technicians for long term job opportunities in Mesa, AZ

    We are seeking candidates with 1 year minimum experience in the aviation or auto body repair field. Knowledge in Painting practices, sanding
    prepping, Pneumatic tools and sprayers. Mixing of paint and application. Experience in any of the above will be considered.

    JOB DESCRIPTION:
    Completes assigned aircraft tasks as directed by Flight Line Crew Chief or supervisor, including open and incomplete planning, one shots, rework, and
    production test and production acceptance test procedures in compliance with written or verbal instructions.

    This position will require the flexibility to work 1st or 2nd shift.

    Primary Responsibilities:
    Follow all documentation required to complete job tasks, such as planning, drawings, processes, standards, technical manuals, schematics, discrepancy
    reports, alerts, directives, and customer maintenance documents.
    Operate all ground support equipment required to supply or service aircraft electrically, hydraulically, pneumatically, and with fuel; verifies
    aircraft preparedness and availability of ground support equipment.
    Troubleshoot anomalies encountered in aircraft subsystems.

    Implement corrective actions.
    Provide scheduled or unscheduled aircraft maintenance prior to flight or afterward, such as daily or special inspections, adjustments, tabbing,
    balancing, and pilot discrepancy repairs.
    Use standard or special tooling required for mechanical, electrical, or airframe installation, removal, rework and repair.
    Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
    Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gages and scales.
    Report all non-conformances to manufacturing supervision or corrective action representative.
    Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
    Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
    Report on job status and restraints to coworkers and supervision.
    Identify production inefficiencies and suggests potential improvements to product or process.
     
    Job Number: 44945-1
    Job Location: Mesa, AZ
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term
    Start Date: ASAP
    Input Date: 04/22/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Gary
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 845/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Readiness Technician

    Description:
    Position: Flight Readiness Technician
    Location: San Antonio, Texas (78226)
    Duration: One Year

    Indotronix is seeking Flight Readiness Technicians for long term job opportunities in San Antonio, TX.

    Job Description
    The assignment involves final component installation and systems operational functional testing. Performs rework, modification, maintenance, preflight and post-flight checks for delivery. Troubleshoots pre-flight and post-flight functions for delivery.

    Required Skills/Experience
    7 or more Years experience in the following
    1. Pre Flight- Post Flight- troubleshooting- working on live aircraft
    2. Aircraft maintenance and repair
    3. Major dispatch services
    4. Knowledge of live aerospace vehicle operations, environment and support. This includes pneumatic, hydraulic, electrical, and propulsion systems operations.
    5. Knowledge of aircraft maintenance processes, policies, culture, and standard practices (e.g., return to service, normal duties/responsibilities, time constraints, available resources) in order to effectively represent the operator within the company.
    6. Knowledge of responsibilities and tasks performed by various Operations departments/disciplines (e.g., Fabrication, Assembly, Tooling, Quality, Industrial Engineering, Manufacturing Engineering). Knowledge of the interactions between departments/disciplines and how their products/processes affect one another and impact non-operations processes (e.g., Engineering, Business, Logistics).
    7. Knowledge of electrical test methodology (e.g., stand alone bench, automated, integration laboratory, simulation, functional test), planning, procedures, equipment (e.g., multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e.g., pass/fail, control limits, tolerances).
    8. Knowledge of quality systems (e.g., inspection process, Boeing quality procedures).
    9. Knowledge of regulatory authorities' (e.g., FAA, JAA, UK CAA) rules, regulations, flight test procedures, and philosophy.
    10. Must be able to stand, lift up to 35lbs and climb stairs
    11. 787 or composite aircraft

    Preferred experience
    1. A&P License
     
    Job Number: 45071-1
    Job Location: San Antonio, TX
    Rate: Hourly
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term
    Start Date: ASAP
    Input Date: 04/30/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Gary Smith
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 845/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Seeking Flight Test Engineer for long term contract in Savannah, GA
    Skills:
    Test experience supporting aircraft propulsion or aircraft mechanical systems. Email resume and then call Peggy at 774-210-4108.
     
    Job Number: Flight Test PL
    Job Location: Savannah, GA
    Rate: $75-77/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Up to 4 years
    Start Date: 2 weeks
    Input Date: 12/16/2020
    Last Updated: 07/07/2021
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy Lundie
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fly by Wire Control Law Design Engineer - Eng. Contractor 3

    Description:
    Inconen is looking for a Fly by Wire Control Law Design Engineer - Eng. Contractor 3 for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique skills required:
    1. This position requires a candidate with work experience in augmented air vehicle control system design, simulation and analysis using state of the art techniques in linear and non-linear modeling and analysis.

    A Control Law Engineer will:
    1. Establish requirements for control systems functionality, integrity, availability and performance to ensure flight safety and Part 25 certification.
    2. Support design and analysis for fly-by-wire primary and automatic flight control laws.
    3. Develop, document, and inspect fly-by-wire control law models for the purposes of flight dynamics analysis.
    4. Conduct, analyze the results and document simulation laboratory tests of the fly-by-wire primary and automatic flight control laws.
    5. Support flight test activities, including validation and verification of control law design troubleshooting/revising control laws as required.
    6. Qualified Candidates will have experience with augmented airplane control law design, modeling, and analysis along with MATLAB & Simulink fluency.

    The Preferred candidate will have:
    1. Knowledge of stability and control and application of handling qualities criteria to control system design.
    2. Experience with 14 CFR Part 25 certification.
    3. Use of IBM DOORS.
    4. Experience working with ARP4754A, DO-178B.
    5. Requirements Development Experience

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12900
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/01/2021
    Last Updated: 01/06/2022
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fly by Wire Control Law Design Engineer - Eng Contractor 4

    Description:
    Inconen is looking for a Fly by Wire Control Law Design Engineer - Eng Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique skills required:
    1. This position requires a candidate with work experience in augmented air vehicle control system design, simulation and analysis using state of the art techniques in linear and non-linear modeling and analysis.

    A Control Law Engineer will:
    1. Establish requirements for control systems functionality, integrity, availability and performance to ensure flight safety and Part 25 certification.
    2. Support design and analysis for fly-by-wire primary and automatic flight control laws.
    3. Develop, document, and inspect fly-by-wire control law models for the purposes of flight dynamics analysis.
    4. Conduct, analyze the results and document simulation laboratory tests of the fly-by-wire primary and automatic flight control laws.
    5. Support flight test activities, including validation and verification of control law design troubleshooting/revising control laws as required.
    6. Qualified Candidates will have experience with augmented airplane control law design, modeling, and analysis along with MATLAB & Simulink fluency.

    The Preferred candidate will have:
    1. Knowledge of stability and control and application of handling qualities criteria to control system design.
    2. Experience with 14 CFR Part 25 certification.
    3. Use of IBM DOORS.
    4. Experience working with ARP4754A, DO-178B.
    5. Requirements Development Experience

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12901
    Job Location: Savannah, GA
    Rate: $65.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/04/2021
    Last Updated: 05/24/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fuel System Engineer

    Description:
    Candidates should have experience with:
    - Aircraft fuel systems and components including wing fuel tanks, delivery, refuel and fuel quantity measurement
    - FAA Part 25/EASA CS-25 certification of fuel system components, including qualification and test plans, test witnessing, data analysis, and reporting
    - Coordinating with fuel system suppliers to meet system and component design, test and certification requirements
    Also desirable:
    - Familiarity with Fuel Tank Ignition Prevention per Part 25.981
    - Experience with aircraft turbine engine installations including nacelles, inlet, thrust reverser and engine build-up
    - Requirements and testing of components in designated fire zones, flammable fluid zones and on firewalls


    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:

    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 160207
    Job Location: Savannah, GA
    Rate: $60.00 - $70.00
    Per Diem: Possible
    Overtime: Possible
    Duration: Open End Contract
    Start Date: ASAP
    Input Date: 04/05/2021
    Last Updated: 05/18/2021
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Kerry Moreland
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fuel Systems Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products

    Unique Skills:
    Candidates should have experience with:
    • Aircraft fuel systems and components including wing fuel tanks, delivery, refuel and fuel quantity measurement
    • FAA Part 25/EASA CS-25 certification of fuel system components, including qualification and test plans, test witnessing, data analysis, and reporting
    • Coordinating with fuel system suppliers to meet system and component design, test and certification requirements
    Also desirable:
    • Familiarity with Fuel Tank Ignition Prevention per Part 25.981
    • Experience with aircraft turbine engine installations including nacelles, inlet, thrust reverser and engine build-up
    • Requirements and testing of components in designated fire zones, flammable fluid zones and on firewalls

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    • Perform other duties as assigned.
     
    Job Number: 24-522
    Job Location: Savannah, GA
    Rate: $60-70/hour
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fuselage Integration Design Specialist - China.

    Description:
    Fuselage Integration Design Specialist - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Fuselage Integration Design.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • At least 10 years of working experience in R & D related to fuselage structure strength of foreign civil aircraft.
    • Have civil aircraft structure integration related professional knowledge and ability.
    • Working experience in fuselage structural strength engineering in the whole life cycle (at least including R & D, certification, batch production and operation).
    • Have the professional knowledge and ability of structural strength design and modification of  civil aircraft derivative models,  have the ability to independently build a complete development idea of derivative structural strength and formulate a research and development path; have rich experience in structural strength design of derivative models, and participate in airworthiness certification of foreign civil aircraft derivative models. Can guide the airworthiness certification of derived structural strength.
    • More than 8 years working experience in R & D of windshield and cockpit door.
    • Rigorous and dedicated, willing to communicate.
    • Proficient in English listening, speaking, reading and writing.
    • Degree or Doctorate qualified.
    Role and Duties:
     
    • R & D plan of fuselage structure design.
    • Overall planning and guidance of fuselage design specifications.
    • Model fuselage design and analysis scene automation planning and guidance.
    • Engineering application of new structural technology.
    • Top level planning and integrated design work related to fuselage structure design, analysis, improvement and capacity building of derivative models (business aircraft, cargo aircraft, etc.). Coordinate the work related to fuselage structure and strength of derivative models, coordinate the verification of fuselage structure of derivative models, development batch delivery, compilation of repair manual, etc., and cooperate with process design and maintenance manual of derivative models. Cooperate with human resources, education and training, project, quality, airworthiness, procurement and supply, configuration and other departments to carry out product related work.
    • Overall planning and guidance of windshield and cockpit door R & D.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.





     
    Job Number: BH-359
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/20/2021
    Input Date: 04/21/2021
    Last Updated: 06/17/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    High Complex System Monitors design and voting Development Specialist- Aircraft Flight Controls

    Description:
    High Complex System Monitors design and voting Development Specialist - Aircraft Flight Controls - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Monitoring and Voting for Aircraft Flight Controls Development on Civil Passenger Aircraft. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     

    • Over 10 years working experience on Monitors design and health management for  High Complex system on civil aircraft.
    • Solid foundation of aerodynamic and control theory.
    • Teamwork, Self-motivation, result-oriented.
    • Excellent communication skill in English.

    Job Description:

    • Develop and verify the monitors and voting technology for Flight control system on aircraft.
    • Redundancy design for complex on-board system.
    • Monitoring threshold design for complex on-board system.
    • High coverage BIT design for on-board system.
    • Build the High Complex System monitors Development team.
    • Build the Validation and Verification Process Steps for Monitors, Development in Complex Systems.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Role can be on Full or Part Time basis.  Applicants are asked to highlight their relevant experience upon application.
     
    Job Number: BH-310
    Job Location: Shanghai, China
    Rate: Good Salary and Benefits - Negotiable
    Per Diem: --
    Overtime: --
    Duration: 1 - 3 years
    Start Date: 04/21/2021
    Input Date: 11/14/2020
    Last Updated: 06/18/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer

    Description:
    The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

    Duties and Responsibilities:
    1. Leading process optimization efforts to address specific business requirements and to eliminate waste from Company assembly processes.
    2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.
    3. Implementing productivity improvements.
    4. Working with cross functional teams to develop best practice solutions.
    5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.
    6. Implementing mistake-proofing controls to maintain or improve process quality.
    7. Conducting root cause analyses to address specific process or quality problems.
    8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.
    9. Performing Time Studies to understand processes and performance metrics.
    10. Documenting processes using process mapping and value stream mapping.
    11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.
    12. Designing facility layout alternatives.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
    2. Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
    3. Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
    4. CATIA and AutoCAD experience is a plus.
    5. Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
    6. Strong analytical skills coupled with a creative and open mind towards alternative methods.

    Knowledge, Skills and Abilities:
    1. Strong analytical and innovative skills.
    2. Strong work ethic.
    3. Ability to multitask.
    4. Ability to work under minimal supervision.
    5. Detail oriented.
    6. Excellent problem solving skills.
    7. Ability to read and interpret engineering drawing and/or specification requirements.
    8. Excellent communication skills, both verbal and written.
    9. Excellent presentation skills.
    10. Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
    11. Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

    Physical Requirements:
    1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    4. Read, hear, speak, and see with no restrictions, as required by job duties.
    5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    6. Effectively communicate in Business English language.
    7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
     
    Job Number: 28-018
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: Yes
    Overtime: Possbile
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 04/30/2021
    Last Updated: 05/14/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Sami Glass
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Intake and Exhaust Design Engineer - Civil Aircraft - China.

    Description:
    Intake and Exhaust Design Engineer - Civil Aircraft - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Intake and Exhaust Design.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:

     
    • Aerodynamic design experience of civil aircraft aerodynamic propulsion system (more than 10 years).
    • Working experience in other  engine or aircraft design institutes.
    • Professional knowledge of fluid mechanics, aerodynamics, aircraft aerodynamic design, aerospace propulsion theory and engineering.
    • Proficient in civil aircraft and engine aerodynamic design and integrated design technology.
    • Good communication skills
    • Good team work spirit
    • Proficient in English listening, speaking, reading and writing
    • Degree Qualified or a Doctorate 

    Role and Duties:
     
    • Civil aircraft aerodynamic propulsion aerodynamic integrated design field development and cutting-edge technology tracking.
    • Civil aircraft aerodynamic propulsion aerodynamic integrated design index, constraint determination and scheme verification planning.
    • Aerodynamic shape design and engine integration of aerodynamic integrated design scheme for civil aircraft aerodynamic propulsion.
    • Development of test scheme for aerodynamic integrated design scheme of aerodynamic propulsion Test verification analysis.
    • The development and construction of tool platform and method specification related to aerodynamic integrated design scheme of aerodynamic propulsion;
    • Support the collaborative work of integrated optimization design and verification of aircraft, propulsion system and airframe system..

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Full Time employment.
     
    Job Number: BH-341
    Job Location: China, China
    Rate: Salary +Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 05/19/2021
    Input Date: 04/21/2021
    Last Updated: 06/17/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Integrated Hydraulic Design - Aircraft Hydraulics - China

    Description:
    Integrated  Hydraulic Design - Aircraft Hydraulics - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Integrated Aircraft Hydraulics Design.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • Experience in designing mechanical products and components, including bolt, hinge, door mechanism, lock, valve, pump and actuators.
    • Working experience in international well-known Hydraulics Companies, institutions or universities, doctoral degree is preferred.
    • Preferred working experience in civil aircraft OEM or related mainstream suppliers.
    • Good command of English listening, speaking, reading and writing.
       Role and Duties:
     
    • Coordinate with overall aerodynamics, performance stability, structure, flight crew control, pilot, electrical system, system strength, customer service, airline customer, manufacturing, airline operation, supplier management and aircraft safety and other related teams to develop world-class competitive mechanical and hydraulic system products.
    • Develop and confirm requirements and interface definitions.
    • Carry out detailed design of new products.
    • Conduct a variety of comprehensive analysis / simulation, using CAD system tools (e.g CATIA V5) and mathematical modelling tools (such as Simulink MATLAB and EASY5).
    • Verify the design and performance through product level, system level and aircraft level tests.
    • Participate in design review and supplier communication management.
    • Participate in airworthiness activities related to client products.
    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 
     
    Job Number: BH-346
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/21/2021
    Input Date: 04/22/2021
    Last Updated: 06/18/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Integration Engineer

    Description:
    An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

    Integration Engineer 2 duties:

    * Develop and perform circuit card level and unit level testing to ensure a successful product
    delivery to customer's aircraft.
    * Develop and document test equipment to support lab testing.
    * Provide technical assistance to senior staff in support of current programs.
    * Prepare and review custom test equipment drawings and designs, using electrical and
    mechanical hardware and software, with guidance from other engineers, to enable test of
    aircraft electrical power equipment.
    * Analyze and solve a variety of technical problems through use of test data and specification
    requirements. Organize and analyze data and document results. Review results to ensure their
    accuracy and appropriateness.
    * Prepare and present technical information of limited scope for internal engineers, program
    personnel, and other internal customers.
    * Acts as an individual contributor, building stable working relationships internally through tasks
    and assignments.
    * Guide internal technicians as required in performing system integration and development tests
    and custom test equipment build.

    EDUCATION AND EXPERIENCE REQUIRED:

    * Electrical engineering background with a BSEE degree.
    * 2 plus years of experience
    * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
    lawfully admitted into the U.S. as a refugee or granted asylum.

    If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


     
    Job Number: 309499
    Job Location: Kirkland, WA 98034,
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 03/03/2021
    Last Updated: 06/14/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Description

    General Summary:
    The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

    Duties and Responsibilities:
    1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
    2. Develops designs for form/fit/function to meet customer and design criteria.
    3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
    4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
    5. Makes recommendations to engineering lead/management.
    6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
    7. Ensures adherence to program schedule.
    8. Performs other duties as assigned.


    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
    2. Masters’ degree in Engineering preferred.
    3. 8+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.


    Knowledge, Skills and Abilities:
    1. Working knowledge of conceptual design development of aircraft interiors.
    2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
    3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
    4. Familiarity with 14CFR Part 23/25.
    5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
    6. Proficiency in Teamcenter (or equivalent PLM tool).
    7. Ability to work independently or within a team environment.
    8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
    9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 467
    Job Location: Greensboro, NC
    Rate: $60-$62/Hr.**DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ Year
    Start Date: 4-6 Weeks
    Input Date: 05/11/2021
    Last Updated: 07/30/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    LRU and Components Engineer - Engine Control System

    Description:
    This position is responsible for requirements management of line replaceable units (LRUs) and components used on a new aircraft turbine propulsion system. The successful candidate will have systems engineering experience and understand how to develop and flow system requirements to the individual LRU and components suppliers.

    REQUIRED SKILLS:

    * Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
    * Systems requirements flow down & management experience
    * Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
    * Understanding of design process
    * Understanding of qualification process
    * DOORS proficiency
    * Ability to drive teams to success
    * Effective communication skills (both verbal and written)
    * Self-motivated, accountable, detail-oriented

    PREFERRED SKILLS:

    * Supplier Management of Components such as valves, temp/pressure sensors, torque sensors, etc.

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:

    Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: StTm/OT
    Duration: 6 mo +
    Start Date: ASAP
    Input Date: 07/01/2021
    Last Updated: 07/22/2021
    Firm Name: REAL TIME CONSULTING
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear Control System Integrated Design - China

    Description:
    Landing Gear Control System Integrated Design - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Aircraft Landing Gear Control System Integrated Design.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:

     
    • Knowledge of landing gear system and hydraulic system.
    • Experience in system analysis, mathematical model and simulation.
    • Experience in model verification and validation.
    • Understand airworthiness and certification requirements.
    • Understand system engineering.
    • Working experience in Matlab / Simulink, Adams and AMESim.
    • Rich experience in requirements compilation and confirmation.
    • At least 20 years working experience in landing gear system or hydraulic system.
    • Working experience in  related mainstream suppliers of Aircraft Hydraulics.
    • Good command of English listening, speaking, reading and writing.
    • Degree Qualified or Doctorate.

    Role and Duties:
     
    • The mathematical model is established and simulated.
    • Dynamic and static loads are calculated.
    • Analyse the performance and frequency response.
    • Steady state, shimmy, model analysis and failure mode analysis are carried out.
    • Verify and confirm the mathematical model.
    • Prepare and confirm performance requirements.
    • Compile and define simulation objectives and acceptable criteria.
    • System optimization design.
    • Define test requirements and test structure analysis.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. Possibilities exist for Full Time employment.
     
    Job Number: BH-344
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/20/2021
    Input Date: 04/21/2021
    Last Updated: 06/17/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear Engineer

    Description:
    The primary responsibilities will include design, manufacture, integration and test aspects of the nose and main landing gear. Specific tasks will include supporting component NCRs, ownership for First Flight Readiness Review documentation, supporting bench testing of subsystems, oleo shock absorber performance drop testing, landing gear integration, landing gear retraction / extension swing testing.

    Required Knowledge, Skills, and Abilities:
    • 5+ years industry experience with landing gear systems
    • Industry experience with landing gear performance requirements
    • Industry experience designing, performing initial sizing analysis, and producing technical drawings of components in CAD
    • Industry experience with integrated systems testing, test plan writing, and report authoring
    • Well versed in Geometric Dimensioning and Tolerancing (GD&T) standards
    • Excellent communication skills
    • Ability to partner internally and research and interact with potential suppliers

    Preferred Knowledge, Skills, and Abilities:
    • 5+ years industry experience as a responsible engineer on landing gear
    • Experience using Simulink to model landing gear systems
    • Experience with modeling and dynamic simulations of fluid-mechanical systems
    • Industry experience designing parts, performing stress analysis, producing drawings and working with large assemblies within the SolidWorks environment
    • Knowledge of kinematic analysis/synthesis of mechanisms
    • Working knowledge of aerospace aluminum and steel alloys, heat treats, and manufacturing processes
    • Experience with full life cycle of aircraft system development including design, integration, and test
    • Experience developing, refining and managing system level requirements from formal and informal sources
    • Experience with manned experimental aircraft flight testing

    Degrees and Certifications:
    • An undergraduate degree in Aerospace Engineering or Mechanical Engineering is required
     
    Job Number: 45-012
    Job Location: Denver, CO
    Rate: $70-80/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 06/02/2021
    Last Updated: 06/03/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Structures Engineer - Flight Test - 2nd Shift

    Description:
    Inconen is looking for an MRB Structures Engineer - Flight Test - 2nd Shift for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    - Bachelors degree in Aerospace or Mechanical Engineering.
    - Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
    - Experience should be in a Production and/or schedule-driven environment. Supporting Flight Test phase of a/c development a plus.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
    - 2nd Shift Position. Typically 4X10 work schedule. Occasional overtime possible.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15059
    Job Location: Savannah, GA
    Rate: $68.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/26/2021
    Last Updated: 06/01/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer 3

    Description:
    Chipton-Ross is seeking a Manufacturing Engineer 3 for an opening in Hazelwood, MO

    RESPONSIBILITIES:
    Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies. Job Responsibilities:
    Reviewing drawings, models, specifications, and other technical documentation to ensure manufacturability of spare parts.
    Building technical data packages for use by suppliers.
    Developing and implementing manufacturing plans
    Analyzing design and build concepts to evaluate a producible definition and investigate alternative solutions to meet producibility requirements.
    Resolving technical problems that would significantly affect performance, cost or schedule.
    Consult and coordinate with other engineering teams across multiple platforms and disciplines.
    Represent Manufacturing Engineering on a cross-functional team to resolve high risk issues

    REQUIRED EXPERIENCE:
    5+ years' experience in engineering
    Experience with CATIA, Unigraphics (NX) or other 3D Computer aided design tools
    Experience with sheet metal, machining processes and composites, as well as knowledge of assembly/installation processes

    ADDITIONAL EXPERIENCE:
    Experience in Tool Engineering
    Experience in Cross Functional environments
    Experience in working with or supporting military aircraft

    EDUCATION:
    Accredited Bachelor's, Master's or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:00 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    ADDITIONAL QUALIFICATIONS:
    Prefer local candidates.
     
    Job Number: 190598
    Job Location: Hazelwood, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/16/2021
    Last Updated: 06/13/2022
    Firm Name: CHIPTON ROSS
    Attention: Richard Barrett
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer 3

    Description:
    SSE is looking for Manufacturing Engineer 3 to fill a role in St. Louis, MO.

    FULL BENEFITS: includes 12 PAID HOLIDAYS & 13 PTO DAYS per year (NO WAIT PERIOD), 401k match.

    JOB DESCRIPTION:
    Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

    Position Responsibilities:
    • Reviewing drawings, models, specifications, and other technical documentation to ensure manufacturability of spare parts.
    • Building technical data packages for use by suppliers.
    • Developing and implementing manufacturing plans.
    • Analyzing design and build concepts to evaluate a producible definition and investigate alternative solutions to meet producibility requirements.
    • Resolving technical problems that would significantly affect performance, cost or schedule.
    • Consult and coordinate with other engineering teams across multiple platforms and disciplines.
    • Represent Manufacturing Engineering on a cross-functional team to resolve high risk issues.

    Required Skills and Experience:
    • 5+ years' experience in engineering.
    • Experience with CATIA, Unigraphics (NX) or other 3D Computer aided design tools.
    • Experience with sheet metal, machining processes and composites, as well as knowledge of assembly/installation processes.

    Preferred, Skills and Experience:
    • Experience in Tool Engineering
    • Experience in Cross Functional environments
    • Experience in working with or supporting military aircraft

    • “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen required.

    Education:
    • Bachelor's, Master's or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET accreditation is the preferred, although not required, accreditation standard.
     
    Job Number: 44768
    Job Location: St. Louis, MO
    Rate: BOE
    Per Diem: No
    Overtime: No
    Duration: 12 months
    Start Date: TBD
    Input Date: 04/21/2021
    Firm Name: SSE INC
    Attention: Justin Udany
    Address: 9666 OLIVE STE 710
    City, State: ST LOUIS, MO 63132
    Phone: 314/439-4728
    Website: www.sseinc.com/careers

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II - 4 Openings

    Description:
    Manufacturing Engineer II - 4 Openings
    US CITIZENSHIP IS A MUST
    Must-have:
    • Bachelor's of Science degree in related discipline and 3 or more years of relevant experience
    • Experience with Computer Aided Engineering tools

    Location – Louisville, CO
    Rate - $35-40/hr.
    Must have one of the following:

    Thermal protection systems- This will be working to support bonding on thermal tiles on an aircraft. Need folks with bonding and surface preparation background and experience with work instructions

    Propulsion- We need folks with experience with orbital welding of tubing. This could be out of medical or another field. Anyone with Bi-metallic welding experience would be highly desirable. Experience with work instructions is also desirable.

    Ground support equipment- Looking for folks with experience with crane lift operations or design of lifting fixtures. Experience with work instructions is also desirable.

    Preferred Experience:
    • Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
    • Background in the Aerospace and Defense Industry
    • Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes
    • Familiarity with work instruction/traveler development
    • Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)
    • Experience with new product introduction and transition to production
    • Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

    The Structures Company LLC is an AA/EOE
     
    Job Location: Louisville, CO
    Rate: $30-40/hr DOE
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 04/14/2021
    Last Updated: 08/02/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mass Properties Engineer

    Description:
    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    The successful candidate shall have experience with Weight and Balance for outfitting of an airplane. Candidate shall have knowledge of the applicable regulations governing weight and balance operations. Experience working within an ODA environment a plus. Experience working with sales a plus. Candidate must have excellent written and verbal skills.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-526
    Job Location: Savannah or Dallas, GA or TX
    Rate: $60-$65/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 05/05/2021
    Last Updated: 05/14/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Completions Engineer - Contractor 5

    Description:
    Inconen is looking for a Mechanical Design Completions Engineer - Contractor 5 for our client, a well-known Aerospace Company, in Appleton, WI.

    ** Candidates must be a U.S. Citizen or Permanent Resident **

    Unique Skills:
    -Must have a least bachelor’s degree
    -This is a Design Engineer position in Structural/Mechanical Engineering for Completions Engineering.
    -Responsibilities primarily involve engineering design, modeling, and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    -Examples include custom cabinetries such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations.
    -The design engineer will design installations for these commodities along with necessary airframe modifications to meet load requirements of the interior installation.
    -Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5.
    -Candidate must have significant experience with AutoCAD, Catia V5, and Smarteam.
    -The design engineer will employ design standards consistent with company standards and accepted design methods.
    -Engineer will be required to liaison with the shop on engineering issues.
    -Candidate must have a minimum of 10 years of design experience in business aviation completions.
    -Experience with EWIS preferred.
    -Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule.
    -Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Education and Experience Requirements:
    -Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -13 years specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    -Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    -Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Responsible for an entire engineering project of major complexity within established scope
    2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    4. Leads the development of innovative principles and ideas
    5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    6. Works under consultative direction; uses independent judgment to accomplish objectives
    7. Develops standards and guides for diverse engineering activities
    8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15142
    Job Location: Appleton, WI
    Rate: $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/12/2021
    Last Updated: 05/10/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Design & Analysis Engineer 1

    Description:
    SSE is looking for Mechanical Systems Design & Analysis Engineer 1 to fill a role in St. Louis, MO.


    FULL BENEFITS: includes 12 PAID HOLIDAYS & 13 PTO DAYS per year (NO WAIT PERIOD), 401k match.


    JOB DESCRIPTION:
    Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs limited detail design development and modification of mechanical and fluid system installations. Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under close supervision.

    Position Responsibilities:
    Your duties as a design engineer will include, but are not limited to:
    • Create new 3-dimensional layouts for a wide variety of mechanical support equipment (SE) in Unigraphics NX
    • Perform detail drawing / design development and modification of structural components and assemblies
    • Make engineering design decisions on materials, material processes, finishes, components, and assembly
    • Modify or develop and release detail designs, via model based definition or 2-D drawings and parts lists via Teamcenter
    • Support internal, informal peer reviews and formal design reviews with USAF and USN customers, as needed
    • Perform technical support of manufacturing / fabrication, typically at local suppliers, as needed
    • Assist in informal testing of support equipment, including aircraft and/or component physical and functional interface, as needed
    • Learn quickly with mentoring / assistance from other design engineers

    PREFERRED SKILLS/ QUALIFICATIONS:
    • Experience with creating mechanical engineering drawings and/or drawing changes
    • Experience in creating 3-D models in CAD
    • Experience with a PDM, such as Teamcenter
    • Experience working in a team setting
    • Some familiarity with mechanical engineering design
    • Ability to work flexible hours and occasional overtime

    • “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen required

    EDUCATION:
    • Bachelor’s degree (or higher) in mechanical or aerospace engineering. ABET is the preferred, although not required.
     
    Job Number: 44758
    Job Location: St. Louis, MO
    Rate: BOE
    Per Diem: No
    Overtime: possible
    Duration: 12 months
    Start Date: TBD
    Input Date: 04/21/2021
    Firm Name: SSE INC
    Attention: Thomas Bahan
    Address: 9666 OLIVE STE 710
    City, State: ST LOUIS, MO 63132
    Phone: 314/439-4728
    Website: www.sseinc.com/careers

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Design Engineers

    Description:
    Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
    1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
    2. Performs trade studies to identify optimal engineering solution.
    3. Collaborates with the Integrated Product Team to resolve cross functional issues.
    4. Reviews work performed by others and ensure work is to the highest standard.
    5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    6. Have the ability to understand and apply certification requirements.
    7. Implement design solutions optimized for cost and weight.
    8. Manages task execution to ensure on-time and on-target completion.
    9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
    10. Searches for problem root cause and develop corrective action plans and solutions.
    11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
    12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

    Education, Work Experience, Certification and/or Licensure:

    1. BS in Mechanical Engineering with 10-15 years directly related experience
    1. OR MS / MBA with 8-13 years of experience
    2. OR 18-23 years directly related experience
    2. Some Travel will be required


    Knowledge, Skills and Abilities:
    1. Proficient in use of CATIA Version 5.
    2. Advanced knowledge of drafting rules.
    3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
    4. Proficient in Microsoft Office Products.
    5. Use of Team Center.
    6. Familiar with FAR Part 23 or Part 25.
    7. Functional knowledge of SAP.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Greensboro, NC
    Rate: $60-66/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1-year+
    Start Date: ASAP
    Input Date: 10/27/2021
    Last Updated: 05/26/2022
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer (2nd Shift)

    Description:
    Inconen is looking for a Mechanical Systems MRB Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**
    **Candidates must show their related Mechanical Systems MRB Engineering experience in resume**

    Unique Skills:
    Experience in MRB / Liaison Engineering with major Aircraft manufacturer. Experience with Aircraft Mechanical Systems troubleshooting & repair highly desirable. Experience with Flight Controls rigging & trims a plus.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 13 years specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 14950
    Job Location: Savannah, GA
    Rate: $68.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/07/2021
    Last Updated: 07/16/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer - 2nd Shift

    Description:
    Unique Skills:

    Experience in MRB / Liaison Engineering with major Aircraft manufacturer. Experience with Aircraft Mechanical Systems troubleshooting & repair highly desirable. Experience with Flight Controls rigging & trims a plus.


    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:

    Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering or related curriculum preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline
    .
     
    Job Number: 163591
    Job Location: Savannah, GA
    Rate: $68.00 - $72.00
    Per Diem: Possible
    Overtime: Possible
    Duration: Open End Contract
    Start Date: ASAP
    Input Date: 04/07/2021
    Last Updated: 05/18/2021
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Kerry Moreland
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Nacelle and Thrust Reverser Development Specialist - China

    Description:
    Nacelle and Thrust Reverser Development Specialist - China.


    Our Aerospace Client in China requires additional support for their current and future pro.grams. They desire an Engineer or Specialist with strong experience In Nacelle and Thrust Reverser Development.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • More than 10 years in the field of civil aircraft nacelle development.
    • Experience in nacelle component design and system integration research and development.
    • Directly participated in the certification of nacelle airworthiness.
    • Aircraft system engineering design.
    • Design of reverse thrust device for civil aircraft nacelle.
    • Civil aircraft nacelle design and integration.
    • Be able to design the thrust reverser independently.
    • Be able to lead the team to carry out nacelle design and integration work.
    • Conscientiousness, good teamwork spirit, good communication and coordination ability, multi-cultural working atmosphere.
    • Proficient in English listening, speaking, reading and writing.
    • Degree qualified or Doctorate.
       Role and Duties:
     
    • Define, analyse and confirm the nacelle requirements, especially the nacelle requirements from the engine.
    • Design, verification and forensics of the reverse thrust device of the specified model nacelle, and lead the team to improve the reverse thrust integrated design ability.
    • Component design and system integration scheme of specified type nacelle.
    • Specify the type of nacelle test verification and forensics planning, Preparation of standards and specifications related to nacelle design and integration.
    • Training on nacelle design and integration.
    • Participate in solving the difficult problems in the operation of the specified model route and flight test certification stage, and provide technical consultation.
    • Participate in the trade-off of new technology and new scheme for specified type of nacelle.
    • Participate in the key core technology research of nacelle integrated design and integration.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application. 


     
    Job Number: BH-350
    Job Location: China, China
    Rate: Salary+ Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/20/2021
    Input Date: 04/21/2021
    Last Updated: 06/17/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Integration Engineer 1

    Description:
    Inconen is looking for a Powerplant Integration Engineer 1 for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    Experience and or interest in Aircraft propulsion system integration desired

    Education and Experience Requirements:
    Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. Entry level. 0 to 18 months experience.

    Position Purpose:
    Performs engineering work related to the investigation and solution of basic problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Provides technical assistance to engineering staff and contributes by completing discrete engineering tasks on schedule 2. Using company procedures, applies engineering knowledge to resolve routine issues 3. Analyzes and evaluates results of project activities 4. Prepares recommendations for changes and compiles necessary reports for various department supervision 5. Recognizes discrepancies and/or problems with analysis/test results and works toward corrective action

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Continues learning and developing knowledge of application of technical principles, theories, and concepts in assigned field of expertise Perform other duties as assigned.

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade level will be established by each discipline. 2. Work is closely supervised/monitored, follows established procedures and methods. 3. Failure to achieve results may cause delays in program schedules. 4. Ability to convey technical concepts in both written and verbal formats. 5. Contacts are primarily with direct supervisor, mentor, and other exempt professionals in the group or department. 6. Works under general supervision for most tasks.
     
    Job Number: 15072
    Job Location: Savannah, GA
    Rate: $32.92 - $37.16/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/29/2021
    Last Updated: 06/04/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Integration Engineer 2

    Description:
    Inconen is looking for a Powerplant Integration Engineer 2 for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    1. Experience in aircraft powerplant integration or aircraft systems engineering is desired.

    Education and Experience Requirements:
    1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
    2. 18 months of related Engineering experience.
    3. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

    Position Purpose:
    1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Solves typical engineering problems within assigned discipline.
    2. Provides technical assistance to engineering staff and contributes to completion of project milestones.
    3. Responsible for a complex engineering assignment, or a full project of lesser complexity.
    4. Follows established schedules while developing plans for engineering assignments.
    5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy.
    6. Proficiently applies company/organization policies and procedures.

    Additional Functions:
    1. Actively works to improve daily processes, and ensures all work meets customer requirements.
    2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
    3. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    4. Ability to convey technical concepts in both written and verbal formats.
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    6. Works under general supervision for routine tasks of minor complexity.
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Number: 15073
    Job Location: Savannah, GA
    Rate: $52.50 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/29/2021
    Last Updated: 05/04/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Systems Engineer

    Description:
    Inconen is looking for a Powerplant Systems Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

    **Candidates must be a U.S. Citizen or Permanent Resident**
    **Candidates must show their related Powerplant Systems Engineering experience in resume**

    Candidates should have experience with:
    - Aircraft turbine engine installations including nacelles, inlet, thrust reverser and powerplant systems.
    - FAA Part 25/EASA CS-25 certification of powerplant system components, including RTCA DO160 qualification test requirements, test plans, test witnessing, data analysis, and reporting.
    - Requirements and testing of components in designated fire zones, flammable fluid zones and firewalls.
    - Coordinating with engine and nacelle suppliers to meet system and component design, test and certification requirements.

    Also desirable:
    - General knowledge of aircraft turbine engine operation and performance.
    - Must have at least 3 years working experience with interfacing various aircraft subsystems and typical program development phases; preliminary design, TRR, PDR, CDR and qualification.
    - Ideal candidate will have experience with CATIA V5.
    - Must have experience validating and verifying system level requirements using ARP4754A.
    - Must have worked on at least one engine/aircraft certification program integrating aspects of: thrust reverser, engine air and hydraulic systems, anti-icing systems.
    - Must be able to review system schematics and wiring diagrams.
    - Experience working in a fast-paced team environment.
    - Will accept a Master's degree (or foreign degree equivalent) in Engineering or a related field plus 3 years of the above-listed experience or a Ph.D. (or foreign degree equivalent) in Engineering or a related field plus one year of the above-listed experience.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 14958
    Job Location: Savannah, GA
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/25/2021
    Last Updated: 05/10/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Program Planning Scheduling Analyst Sr.

    Description:
    Inconen is looking for a Program Planning Scheduling Analyst Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

    ** Candidates must be a U.S. Citizen or Permanent Resident **

    Unique Skills:
    -Experience developing aircraft modification build schedules.
    -Experience developing Integrated Master Schedules and critical path analysis

    Education and Experience Requirements:
    -Bachelor's Degree in Industrial Engineering, Business Administration, or related curriculum required or equivalent combination of education and experience to successfully perform the essential functions of the job.
    -6 years formal scheduling experience with regard to planning, scheduling, and maintaining overall business analysis of managed programs.

    Position Purpose:
    -Under minimal supervision gathers, evaluates past and present information to develop schedules, program plans, financial and resource plans, and other duties needed to support assigned programs.
    -Responsible for supporting the team with resource loaded plans and forecast analysis as required.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Develop and maintain the schedule and/or financial operations of assigned programs that may include any or all of the following coordination with Programs, Engineering, Finance, Operations, Sales, and Product Support.
    2. Develop and utilize efficient tools for collecting and maintaining business and financial analysis data. Analyze data to identify financial and non-financial impacts of managed programs.
    3. Provide detail information to support planning and implementing development strategy analysis, including risk management and program impact analysis.
    4. Interfaces with the Leads and Managers to status, forecast, and build recovery plans to the master schedule.
    5. Conduct detail analysis with an emphasis on achieving cost and maximizing savings of the approved budget.
    6. Identify opportunities of improvement in planning and scheduling, cost control, productivity, capacity planning and analysis.
    7. Assist the suppliers in the development of performance metrics, capacity plans, employee training matrices, milestone plans and project plans.

    Additional Functions:
    1. Provide management with project status updates, feedback, and appropriate reporting.
    2. Coordinate with the departmental leads and managers to flag disconnects between approved budget and schedule.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Requires advanced knowledge and experience with PC based software such as MS Excel, Project, Access, Word and PPT.
     
    Job Number: 15165
    Job Location: Savannah, GA
    Rate: $36.13 - $40.14/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 06/15/2021
    Last Updated: 10/03/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer - F/A-18 Aircraft Systems

    Description:
    Position: Project Engineer 4
    Location: Hazelwood, Missouri (63042)
    Duration: One Year

    Indotronix is seeking a Project Engineer for a long term job opportunity in Hazelwood, MO. This role will require the employee to obtain an
    Interim DoD Secret Clearance.

    JOB DESCRIPTION
    We are seeking a Project Engineer to support the F/A-18 international programs as the Air Vehicle Technical Integrator for Malaysia and Kuwait.
    The Air Vehicle Technical Integrator partners with program management, avionics integrators, and logistics integrators to develop holistic
    sustainment solutions to international customers. The Air Vehicle Technical Integrator is the primary technical point of contact for all air
    vehicle engineering issues and general support activities for the F/A-18 international customers and the US Navy program office.
    This is an excellent opportunity to gain experience interfacing with diverse customers, partner with program management to achieve program
    objectives, demonstrate leadership skills, and expand professional networks.
    The successful candidate must have excellent leadership, communication, organization, and problem solving skills. A strong dedication to customer
    satisfaction is essential as well as the ability to effectively team with Boeing IPTs, customers, and suppliers. Aircraft structural analysis
    experience and experience managing projects is required. Knowledge of the F/A-18 aircraft systems, understanding of the in-service engineering
    process, knowledge of the Foreign Military Sales process, and familiarity with export and contract requirements are preferred.

    Qualifications:
    As a technical integrator supporting F/A-18, your duties will include (but are not limited to):

    •Work directly with the international customers to understand airframe/aero-structure issues and develop solutions with the support of the
    Boeing Integrated Product Teams (IPTs) to meet or exceed international country requirements
    •Facilitate tasking and communication with Boeing, US Navy, and foreign military customers in support of international country F/A-18 program
    objectives and ensure all Air Vehicle engineering issues are being addressed
    •Coordinate with multi-disciplined teams, including avionics and logistics integrators, engineering IPTs, Contracts, and Export
    •Respond to requests for support service estimates, technical information, and other queries
    •Assist in resolving problems generated during flight operations and maintenance activities
    •Deliver CDRLs and other customer requirements
    •Manage problem investigations, tracking, reporting and resolution
    •Participate in In-Service Support Reviews (ISSRs), Technical Coordination Meetings (TCMs), and other meetings as required
    •Some International and domestic travel is required

    •5+ years of experience with structural/airframe engineering on the FA-18 or other tactical aircraft
    •3+ years of experience do you have coordinating the operational aspects of ongoing projects, and serving as liaison between project and
    team, finance, planning, scheduling and management
    •Bachelor’s degree or higher in an engineering field
     
    Job Number: 45084-1
    Job Location: Hazelwood, MO
    Rate: Hourly
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term
    Start Date: ASAP
    Input Date: 04/30/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Gary Smith
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 845/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineers

    Description:
    Experience leading projects consisting of multidiscipline teams.
    • Familiar with the technologies being applied to modern Support Equipment.
    • Understanding business case development and evaluation.
    • Experience communicating, verbally and in writing, with senior management.
    • 5+ years of experience leading business driven decisions to include budgets, staffing levels, Basis of Estimates (BoE), Request for Proposals (RFP) and Statements of Work (SOW)
    • 10+ years of experience working with Support Equipment.
    • Engineering degree in any of the following majors: Aeronautical Engineering; Aerospace Engineering; Computer Engineering; Electrical Engineering; Mechanical Engineering; Systems Engineering, Computer Science or Electrical Engineering Technology
    Preferred Qualifications (Desired Skills/Experience):
    • Familiarity with Support Equipment customers, military and commercial.
    • 5+ years of experience with aircraft systems, structures, or propulsion

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: BO-MO-Project Engineer
    Job Location: St. Louis, MO
    Rate: $85.00/hour+
    Per Diem: Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 04/27/2021
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Engineer

    Description:
    General Summary:
    Develops, directs, and accomplishes Quality Assurance programs that require the application of advanced Quality Assurance techniques and methods.

    Duties and Responsibilities:

    1. Performs Planning Work Instruction review prior to issuance to manufacturing, ensuring that Quality Assurance operations are correctly placed and drawing Quality Assurance requirements are adequately addressed.
    2. Supports discrepancy report activity, along with calibration and tooling.
    3. Directs quality assurance personnel assigned as inspectors in specific areas of responsibility.
    4. Directs the solution of problems affecting the quality of completed aircraft. Assures that the planned courses of action are compatible with contractual commitment, established schedules, cost estimates, available facilities/equipment and other Quality Assurance considerations.
    5. Develops Quality Assurance programs for new products/processes, outlining organization required, inspection techniques and methods, manpower requirements, and facility needs.
    6. Analyzes inspection methods, tools, equipment, and facilities to determine basic requirements for control of quality at desired level.
    7. Organizes, plans, and directs the development/administration/improvements of Quality Assurance functions in support of reliability programs.
    8. Leads the activity of personnel assigned to this function in advanced phases of data analysis, correlation of failure reporting and processing methods and functional program study.

    Qualifications

    Education, Work Experience, Certification and/or Licensure:

    1. BS degree in Engineering or other related field of study preferred.
    2. 2 years minimum of aircraft related Quality Engineering experience.
    3. Experience working corrective actions for FAA requirements.
    4. Experience working FAA audits preferred.
    5. Will consider related experience in lieu of earned academic degree or aircraft familiarity.



    Knowledge, Skills and Abilities:

    1. Excellent oral and written English communication skills.
    2. Excellent computer Microsoft Suite application (Word, Excel, Access, Lotus Notes).
    3. Strong analytical skills are required.
    4. Must be effective in working in an environment that requires the ability to: multi-task, adapt to frequently changing priorities, and to produce quality and timely deliverables within a setting where there are limited established procedures and protocol ambiguity may exist.
    5. Experience, knowledge, or interest in Aerospace, new aircraft development, certification and/or manufacturing is preferred.
    6. Experience in development and oversight of an FAA Part 21 approved Quality System preferred

    7. Ability to act independently with at minimum level of supervision.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 468
    Job Location: Greensboro, NC
    Rate: $50/Hr. **DOE**
    Per Diem: Possible
    Duration: Long Term
    Start Date: 4-6 Weeks
    Input Date: 06/24/2021
    Last Updated: 08/13/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Engineer FAIRS- Aircraft Manufacturing - China.

    Description:
    Quality Engineer FAIRS - Aircraft Manufacturing - China.
     

    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Quality Engineering - FAIRS First Article Inspection.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.

     

    Role and Duties:

    • Responsible for the review and technical preparation of aircraft project structure and system assembly related process documents (assembly outline, advanced assembly outline).
     
    • Responsible for formulating aircraft project structure, system assembly related first article inspection plan, and preparation of first article inspection quality plan, etc.
     
    • Responsible for the preparation of the inspection requirements and plans in the relevant delivery specification SPS for the components of the model project structures supplier, the preparation of the structural component inspection plan, analysis of the inspection results, and preparation of the measurement report.
     
    • Responsible for compiling the acceptance inspection form for the structural parts and finished parts of the model project, and formulating the acceptance inspection requirements.
     

    Required Experience and Qualifications:

     

    • Bachelor degree or above, aircraft, mechanical, electrical, aircraft manufacturing majors, aviation colleges are preferred. 2-3 years and above, quality-related work experience, aerospace industry quality-related work experience.
     
    • Proficient in AS/EN9100 system, proficient in using quality management tools and methods.
     

    Candidates should be prepared to live and work in China full time on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
     
    Job Number: BH-370
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/28/2021
    Input Date: 04/29/2021
    Last Updated: 08/06/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability & Maintainability Engineer

    Description:
    Hi,



    Hope you are doing well, please let me know if you are interested in below position.



    Role: Reliability & Maintainability Engineer

    Location: Ft. Worth TX

    Duration: Contract.

    Job ID: 35280



    Position Responsibilities:
    • Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
    • Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
    • Assess manufacturing Parametrics and maintenance removal times.
    • Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
    • Perform budget estimating and management tasks.
    Qualifications

    Education Requirements:
    • Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.


    Position Requirements:
    • Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
    • Proficiency in Microsoft Office
    • Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
    • Candidates must be eligible to obtain Secret Security Clearance

    Preferred Skills:

    • Prior military experience maintaining rotory or tiltrotor aircraft.
    • Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
    • Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
    • Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
    • Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
    • Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
    • Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
    • Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
    • Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
    • Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
    • Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).
     
    Job Number: 35280
    Job Location: Ft. Worth, TX
    Rate: $75
    Input Date: 04/30/2021
    Firm Name: BRAVOTECH
    Attention: Sandy Singh
    Address: 18111 PRESTON RD STE 630
    City, State: DALLAS, TX 75252
    Phone: 903/815-1590
    Website: www.bravotech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Reliability Engineer

    Description:
    804 Technology is currently looking for a Reliability Engineer for a long term contract job opportunity located in Fort Worth TX. The Reliability Engineer will collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards. Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation. Assess manufacturing parametrics and maintenance removal times. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

    Pay: $65-70/hour based on experience and Per Diem is available to those that qualify.
    Location: Fort Worth TX 76118

    Thank you in advance for your time.

    Brian Smith
    314-753-5299
    bsmith@804technology.com
    Description/Comment:
    Position Responsibilities:
    • Collect, analyze and score Failure Reporting, Analysis and Corrective Action System (FRACAS) data. Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components including participation in Reliability Review scoring boards.
    • Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
    • Assess manufacturing parametrics and maintenance removal times.
    • Formulate reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) using Windchill Quality Solutions software.
    • Perform budget estimating and management tasks.

    Qualifications
    Education Requirements:
    • Bachelor's Degree in Mechanical, Electrical, Aerospace or Systems Engineering is required.
    • Position Requirements:
    • Multiple levels of experience will be considered with a minimum of 2 years of R&M experience in a defense related industry is preferred.
    • Proficiency in Microsoft Office
    • Effective written and verbal communication skills needed to brief top-level management, customers and/or large groups on an occasional-to-frequent basis
    • Candidates must be eligible to obtain Secret Security Clearance

    Preferred Skills:
    • Prior military experience maintaining rotory or tiltrotor aircraft.
    • Applicable experience formulating reliability analyses and predictions (including development of failure rate estimates based on handbook techniques and historical data) preferably using PTC Windchill Quality Solutions software
    • Knowledge of procedures involved with collecting, analyzing, and scoring of Failure Reporting, Analysis and Corrective Action System (FRACAS) data.
    • Recent experience performing Root Cause Analysis (RCA), Engineering Investigations (EI) and Corrective Action Plans (CAP) for failed aircraft components.
    • Knowledge of rotary aircraft systems/sub-systems to include troubleshooting techniques, reliability/maintainability issues and assessment of maintenance removal times.
    • Proficient in the review of flight logs, quality records, manufacturing records and engineering drawings including use of CAD software, preferably CATIA.
    • Applicable experience performing Failure Modes, Effects and Criticality Analyses (FMECA).
    • Experience in conducting engineering investigations with suppliers and customers and participation in Reliability Review scoring boards
    • Applicable experience performing testability assessments including Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), fault detection and fault isolation.
    • Familiarity and/or experience with reliability test plans, R&M program plans, Statements of Work (SOW) and specification preparation.
    • Working knowledge in a related discipline (Avionics, Propulsion, Hydraulics, etc).


    I am currently working remotely. You can reach me in a variety of ways:
    Be safe and stay healthy out there. We are in this together!

    Brian Smith
    Email: bsmith@804technology.com
    Cell: 314-753-5299
    Business: 636-928-0330 (forward message to my email)
    Fax: 636-928-0348

    Brian Smith
    804 Technology
    Recruiting Director
    O. 636-928-0330
    F. 636-928-0348
    C. 314-753-5299
    bsmith@804technology.com
    www.804technology.com

    804 Technology is an equal opportunity employer.
    All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
     
    Job Number: Reliability 804
    Job Location: Fort Worth, TX
    Rate: $65-70/hour
    Per Diem: Split
    Overtime: Possible
    Duration: 9 mos plus
    Start Date: ASAP
    Input Date: 06/11/2021
    Firm Name: 804 TECHNOLOGY
    Attention: Brian Smith
    Address: 5381 HIGHWAY N STE 201
    City, State: COTTLEVILLE, MO 63304
    Phone: 636/928-0330
    Fax Phone: 636/530-3693
    Website: www.804technology.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Remote Regional Sales Manager

    Description:
    A Remote Regional Sales Manager job is currently available through Belcan with one of our Aviation clients. To be considered for this position will be need Business/Corporate Aviation MRO experience, possess high energy, assertive and self-motivated. This position will be expected to travel in region to generate prospects, formulate work scopes, and finalize the sale of client aviation needs. This is a remote position that requires 50%-75% travel

    Regional Sales Manager duties:
    * Conducts regional sales calls through visits, correspondence, telephone, and email
    * Monitors/manages sales/market conditions within assigned sales territory
    * Maintains relationship with regional Business Aviation organizations
    * Develops/maintains a relationship with aviation OEMs, suppliers, brokers, and vendors to increase knowledge of aircraft maintenance and repairs
    * Will be required to work closely with the aviation managers to develop proposals and project schedules
    * Maintains interaction with the Quoting Department to accurately develop airframe proposals
    * Expands sales within assigned territory with particular focus on Airframe business
    * Manages territory and pipeline data in Salesforce.com
    * Manages expenses within the budget

    Qualifications:
    * Must be located in New England Area
    * Must be authorized to work in the US.
    * High school diploma or equivalent required; Bachelor's degree preferred.
    * Minimum of five years in a customer-facing aviation (MRO) sales role. Direct business aviation (MRO) sales experience over a region, preferred.
    * Position resides and works out of the East region.
    Strong industry contacts in business aviation preferred.
    * Airframe technical background preferred, with emphasis on the following: Dassault Falcon Jet, Embraer Legacy, Bombardier Global Express, and Challenger.
    * Strong interpersonal, verbal, and written communication skills.
    * Proficient in computer applications: MSWord, Excel. Ideal candidate will also be proficient in SFDC.
    * A&P Certificate or other industry certification preferred.

    If you are interested in this Regional Sales Manager position please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

     
    Job Number: 311752
    Job Location: Windsor, CT
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/21/2021
    Last Updated: 06/02/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: HaleyThomas
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Aerospace Avionics Engineer

    Description:
    Review and support Avionics Certification activities including:
    • Create aircraft and system level requirements for Avionics systems and identify the validation and verification methods.
    • Create and review Certification Plans.
    • Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
    • Review qualification by similarity and/or analysis reports.
    • Review system safety documents (PSSA, SFHA, AFHA, SSA and Particular Risk Analysis).
    • Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    • Perform Component Drawing Reviews.
    • Complete aircraft assembly and installation drawing reviews.
    • Participate in Aircraft and Systems Design Reviews.
    • Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with suppliers.
    • Coordinate with certification authorities to seek clarification on requirements.
    • Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
    • Create, review and approve interface control documents and any sub level wiring interface documents.
    • Create Design compliance reports for Avionic Systems
    Support Avionics Flight Testing activities including;
    • Discuss, write and review test plans and preparation activities with flight test team.
    • Help prepare and review pre and post flight briefings.
    • Monitor live flight data, typically via telemetry, during flight test on aircraft.
    • Process, analyze, and draw conclusions from post flight data.
    • Make assessments to ensure safety of flight determination.
    • Document flight test design problems for long term fix.
    • Generate and review appropriate limitations documentation.
    • Create and approve rig and ground test requirements and procedures
    • Witness and conduct rig and ground tests
    • Create test reports to verify that the objectives of the rig, ground or flight tests were accomplished per the requirements.
    Experience Requirements:
    Four (4) years’ aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/NAV/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
    Experience & Knowledge of DO-178, DO-254, ARP7454, ARINC-429 and ARNIC-664
     
    Job Number: SAAE-001
    Job Location: Seattle, WA
    Rate: $80/hr
    Per Diem: Split
    Overtime: Possible
    Duration: 6+ mo
    Start Date: ASAP
    Input Date: 06/15/2021
    Firm Name: WINDSPEED TECHNOLOGIES
    Attention: Bruce Stewart
    Address: 2615 W CASINO RD STE 4B
    City, State: EVERETT, WA 98204
    Phone: 425/248-0372
    Fax Phone: 800/568-0556
    Website: www.windspeedtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Hardware Engineer - Avionics - China.

    Description:
    Senior Hardware Engineer - Avionics - China.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Hardware Engineering for Aerospace applications.

    This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
     
    • Experience in International Aerospace companies, a doctorate is preferred in electrical and electronic engineering, computer science, automation control and other related majors.
    • Experience in avionics hardware design (at least 10 years);
    • Solid grasp of PCB / FPGA / DSP / Power PC Design Foundation.
    • Have the ability to plan, design, implement, debug and optimize complex embedded development.
    • Team work, self driving and result oriented.
    • Good command of English listening, speaking, reading and writing.
    Role and Duties:
     
    • Design of hardware scheme in the development of airborne controller.
    • Hardware schematic design of airborne controller.
    • Prepare hardware BOM and assist component suppliers to select or purchase components.
    • Develop rapid prototype for functional testing.
    • Controller hardware integration and laboratory testing.
    • Assist the controller development team in forensics.
    • Set up the R & D team of airborne controller electronic hardware.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

     
    Job Number: BH-365
    Job Location: China, China
    Rate: Salary + Expenses, Benefits
    Per Diem: --
    Overtime: --
    Duration: 1-3 years
    Start Date: 04/21/2021
    Input Date: 04/22/2021
    Last Updated: 06/18/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Simulation Engineer - Tech Spec II

    Description:
    Inconen is looking for a Simulation Engineer - Tech Spec II for our client, a well-known Aerospace Company, in Savannah, GA.

    ** Candidates must be a U.S. Citizen or Permanent Resident **

    Unique Skills:
    -Experience with interacting/updating/troubleshooting real time HIL simulation platforms (e.g. ADI, NI, Speedgoat)
    -Aircraft system simulation experience
    -Ability to read aircraft/simulation electrical drawings
    -Preferred experience integrating various hardware I/O (analog, discrete, data bus, etc.) into a real time simulation platform
    -Preferred experience with integration of aircraft system simulation models to corresponding real aircraft controller hardware (LRUs)
    -Understanding of standard aircraft industry, I/O protocols (i.e. ARINC 429, 664, 485, 717, etc.)
    -Preferred experience with rectifying lab problem reports by troubleshooting, developing solutions and implementation of any issue identified with the simulation platform, simulation models, LRU electrical connections, or auxiliary test equipment
    -Ability to interact with diverse perspectives in order to satisfy lab customer requirements, questions and/or test assistance
    -Preferred proficiency with the utilization of Simulink or High-level language (Fortran, C++, etc.) in a real time simulation environment
    -Preferred experience with Python for the purposes of creating scripts for automation of tests or conducted on a real time simulation platform

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15164
    Job Location: Savannah, GA
    Rate: $68.00 - $72.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/19/2021
    Last Updated: 06/14/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Verification Engineer - Eng Contractor 2

    Description:
    Inconen is looking for a Software Verification Engineer - Eng Contractor 2 for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    1. Degree in Software Engineering, Aerospace Engineering, Computer Science, or equivalent.
    2. Familiarity with real-time embedded software applications, preferably for airborne electronic systems.
    3. Experience performing software verification activities for airborne electronic systems preferred (Flight Control Systems or Avionics for example).
    4. Proficient in MATLAB/Simulink.
    5. Experience performing Hardware in the Loop testing, including unit testing (test bench) and in a lab integrated with peripheral systems and real-time simulations.
    6. Basic understanding of C/C++ or an equivalent programming language.
    7. Familiarity with DO-178C and DO-331 preferred.
    8. Capable of working with Version Control Systems (SVN, git, or equivalent).
    9. Experience writing software requirements.
    10. Experience authoring requirements-based test procedures.
    11. Working knowledge of the principles of control science and theory.
    12. Ability to read and understand functional block diagrams.

    Education and Experience Requirements:
    1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
    2. 18 months of related Engineering experience.
    3. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

    Position Purpose:
    1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Solves typical engineering problems within assigned discipline.
    2. Provides technical assistance to engineering staff and contributes to completion of project milestones.
    3. Responsible for a complex engineering assignment, or a full project of lesser complexity.
    4. Follows established schedules while developing plans for engineering assignments.
    5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy.
    6. Proficiently applies company/organization policies and procedures.

    Additional Functions:
    1. Actively works to improve daily processes, and ensures all work meets customer requirements.
    2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
    3. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    4. Ability to convey technical concepts in both written and verbal formats.
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    6. Works under general supervision for routine tasks of minor complexity.
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Number: 12898
    Job Location: Savannah, GA
    Rate: $40.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/04/2021
    Last Updated: 06/22/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Verification Engineer - Eng. Contractor 3

    Description:
    Inconen is looking for a Software Verification Engineer - Eng. Contractor 3 for our client, a well-known Aerospace Company, in Savannah, GA.

    Unique Skills:
    1. Degree in Software Engineering, Aerospace Engineering, Computer Science, or equivalent.
    2. Familiarity with real-time embedded software applications, preferably for airborne electronic systems.
    3. Experience performing software verification activities for airborne electronic systems preferred (Flight Control Systems or Avionics for example).
    4. Proficient in MATLAB/Simulink.
    5. Experience performing Hardware in the Loop testing, including unit testing (test bench) and in a lab integrated with peripheral systems and real-time simulations.
    6. Basic understanding of C/C++ or an equivalent programming language.
    7. Familiarity with DO-178C and DO-331 preferred.
    8. Capable of working with Version Control Systems (SVN, git, or equivalent).
    9. Experience writing software requirements.
    10. Experience authoring requirements-based test procedures.
    11. Working knowledge of the principles of control science and theory.
    12. Ability to read and understand functional block diagrams.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related advanced degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12899
    Job Location: Savannah, GA
    Rate: $55.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 09/02/2021
    Last Updated: 09/13/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Specialist Engineer - Flow induced Structural vibration response analysis - China

    Description:
    Specialist Engineer - Flow induced Structural vibration response analysis - China. Fixed Term Contract Basis, Full or Part Time.


    Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Flow induced Structural vibration response analysis. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


    Required Experience and Qualifications:
    • Master fluid solid coupling  analysis software(Ansys).
    • Over 10 years working experience on Civil Aircraft vibration and aerodynamic design.
    • Solid foundation in mechanical vibration and aerodynamics.
    • Good communication skills in English.


    Job Description:
    • Knowledge of Flow induced Structural vibration problems of flight test analysis.
    • Analyse and optimise flow induced Structural vibration.
    • Test Planning of Flow induced Structural vibration.

    Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
     
    Job Number: BH-309
    Job Location: Shanghai, China
    Rate: Salary and Benefits Package
    Per Diem: --
    Overtime: --
    Duration: 1- 3 years
    Start Date: 05/12/2021
    Input Date: 11/14/2020
    Last Updated: 06/10/2021
    Firm Name: STRONGFIELD TECHNOLOGIES INC
    Attention: Graham Bird
    Address: 1200 MCGILL COLLEGE AVE STE 1100
    City, State: MONTREAL, PQ H3B 4G7
    Country: CANADA
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Aerospace Engineer

    Description:
    A Sr. Aerospace Engineer job in Centennial, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. To be considered for this role, you will need a Bachelors of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 10 or more years of relevant experience. The ability to obtain and maintain a Secret U.S. Security Clearance is required. MUST BE US CITIZEN. This is a great opportunity with a growing company.

    Sr. Aerospace Engineer Job duties:
    * Research, design, develop, test, certify, deploy and improve cutting edge products and services.
    * Develop complex aerodynamic components, structures, and systems
    * Design and development, analysis, and test of new products and processes throughout the product lifecycle.

    Skills & Experience
    * Bachelors of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 10 or more years of relevant experience
    * Practical knowledge of engineering principles and practices
    * Understanding of Computer Aided Engineering tools and Finite Element Analysis (FEA)
    * Experience working in multi-disciplinary design and development teams
    * The ability to obtain and maintain a Secret U.S. Security Clearance is required

    Preferred Skills:
    * Exposure to Engineering Simulation such Computational Fluid Dynamics (CFD) and Thermal Analysis using tools such as StarCCM or CFD++.
    * Understanding of aircraft external loads, aircraft performance and stability and control.
    * Familiarity with wind tunnel and aircraft flight test.
    * Background in the Aerospace and Defense Industry
    * Understanding of system-level static and dynamic modeling and simulation
    * Exposure to aircraft stability principles and control system design and analysis
    * Knowledge of industry standard aerospace principles, to include, but not limited to parametric design, model-based definition, fundamentals of flight mechanics

    Pay Range: Up to $70/hr DOE

    If you are interested in this Sr. Aerospace Engineer job in Centennial, CO please apply via the 'apply now' link provided.
    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


     
    Job Number: 312037
    Job Location: Centennial, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/28/2021
    Last Updated: 07/09/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Aerospace Engineer

    Description:
    Requirement:
    Bachelor's of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 10 or more years of relevant experience
    Practical knowledge of engineering principles and practices
    Understanding of Computer Aided Engineering tools and Finite Element Analysis (FEA)
    Experience working in multi-disciplinary design and development teams

    The ability to obtain and maintain a Secret U.S. Security Clearance is required

    Preferred:

    Exposure to Engineering Simulation such Computational Fluid Dynamics (CFD) and Thermal Analysis using tools such as StarCCM or CFD++.
    Understanding of aircraft external loads, aircraft performance and stability and control.
    Familiarity with wind tunnel and aircraft flight test.
    Background in the Aerospace and Defense Industry
    Understanding of system-level static and dynamic modeling and simulation
    Exposure to aircraft stability principles and control system design and analysis
    Knowledge of industry standard aerospace principles, to include, but not limited to parametric design, model-based definition, fundamentals of flight mechanics
     
    Job Location: CO
    Input Date: 04/28/2021
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Candace Pham
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis, Interior Furnishings - Engineer Contractor 4

    Description:
    Inconen is looking for a Stress Analysis, Interior Furnishings - Engineer Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

    Required Unique skills:
    Required Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation.

    The ideal candidate will have experience in the following:
    - Use of finite element analysis for both primary and secondary structures required. Working knowledge of FEMAP preferred.
    - Experience performing structural analysis on interior furnishing is preferred.
    - A good understanding of a fast paced completion-style environment
    - Primary structures experience preferred. MRB experience is preferred.
    - Experience working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations preferred.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12767
    Job Location: Savannah, GA
    Rate: $68.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 01/06/2021
    Last Updated: 05/04/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer - Interiors

    Description:
    Structural analysis of interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation.

    The ideal candidate will have experience in the following:

    - Use of finite element analysis for both primary and secondary structures required. Working knowledge of FEMAP preferred.
    - Experience performing structural analysis on interior furnishing is preferred.
    - A good understanding of a fast paced completion-style environment
    - Primary structures experience preferred. MRB experience is preferred.
    - Experience working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations preferred
     
    Job Number: 21-165341
    Job Location: GA
    Rate: $60.00 - $65.00 per hour
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/03/2021
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer Openings

    Description:
    We have a need for several Aircraft Stress Engineers.
    MUST BE US CITIZENS
    $65-80/hr pay rates depending on experience.
    MUST have experience analyzing primary aircraft structures.
    Nastran experience is a MUST.
    Fatigue and Damage Tolerance experience is a MUST.
    Composites experience is MUST.
    BSME or related degree is a MUST.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Wichtia, KS
    Rate: $65-80/hr DOE
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 06/14/2021
    Last Updated: 06/30/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural / Payloads Design Engineer 2

    Description:
    SSE is looking for Structural / Payloads Design Engineer 2 to fill a role in St. Louis, MO.

    FULL BENEFITS: includes 12 PAID HOLIDAYS & 13 PTO DAYS per year (NO WAIT PERIOD), 401k match.

    JOB DESCRIPTION:
    Assists to develop, integrate and document structural and interior payload system requirements to establish the system design. Develops, maintains and modifies basic structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs tests to validate and verify systems and components meet requirements and specifications. Assists with supplier development, test and production activities and coordination with the supplier to optimize the design and achieve program goals. Supports investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general supervision.

    Position Responsibilities:
    Your duties as an engineer will include (but are not limited to):
    • Engineering reach back to the prime organization, mechanical, structural, manufacturing engineering and systems engineering.
    • Develop recommendations for supplier related issues and coordinate with Supplier Management.
    • Implement design changes on spares configurations and new manufacturing processing.
    • Develop and implement continuous improvements plans to provide more efficiencies in spares design and fabrication that provide value to Boeing and the customer.
    • Develop and implement plans to improve supplier coordination to ensure compliance with the requirements.
    • Assists in Model Based Definition activities, converting 2D drawings to 3D models.

    Required Skills and Experience:
    • Experience with CATIA, Unigraphics (NX) or other 3D Computer aided design tools.
    • Minimum 1 year of experience using the following Computer Aided Design (CAD) tools: Teamcenter & Unigraphics

    Preferred, Skills and Experience:
    • Experience working with or supporting military aircraft
    • Ability to prioritize work and manage multiple projects and programs
    • Experience working in a cross functional environment

    • “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen required.

    Education:
    • Bachelor's Degree or higher from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET accreditation is preferred.
     
    Job Number: 44767
    Job Location: ST LOUIS, MO
    Rate: BOE
    Per Diem: No
    Overtime: No
    Duration: 12 months
    Start Date: TBD
    Input Date: 04/21/2021
    Firm Name: SSE INC
    Attention: Thomas Bahan
    Address: 9666 OLIVE STE 710
    City, State: ST LOUIS, MO 63132
    Phone: 314/439-4728
    Website: www.sseinc.com/careers

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineers - Level 3

    Description:
    **Must have active secret clearance
    This position will provide static and durability/damage tolerance (DaDT) structural analysis and documentation in support of a tactical fighter program.
    Must have active secret clearance
    o 3+ years of experience in structural fatigue analysis
    o 3+ years of experience in a military or commercial aircraft environment
    o Must have at least a Bachelor's degree or higher in Engineering

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: Stress-Bo_MO
    Job Location: St. Louis, MO
    Rate: $72.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: Long term
    Start Date: ASAP
    Input Date: 04/27/2021
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineer III

    Description:
    A Structural Engineer III- Thermal Protection Systems job in Louisville, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 6 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance may be required.

    Structural Engineer III Job duties:

    * You will primarily be responsible for performing structural analysis, using finite element
    methods and hand calculations.
    * You will be assigned structural analysis tasks that may include structural sizing for primary and secondary structure, non-conformance evaluations, mass trade studies, test analysis, model correlation, and conceptual level studies.
    * Support the development of Thermal Protection Systems (TPS) for the Dream Chaser Cargo
    * System through structural analysis, using both finite element methods and hand calculations
    * Proficiency with FEMAP/NASTRAN analysis tools and methods
    * Proficiency with MATLAB programming and automation (desired)
    * Knowledge of TPS materials (such as AETB tile and strain isolation pads) and their unique
    characteristics (desired)
    * The analysts will work with test engineers to develop full-scale test conditions that successfully envelop flight conditions for critical failure modes.
    * Originate specifications, control documents, verification and validation plans, procedures,
    reports, or other documentation in support of design and development activities
    * Prepare material for, and conduct, periodic design reviews
    * Execute engineering design and development activities consistent with Customer quality,
    cost, and schedule requirements

    Qualifications:

    * Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 6 or more years of relevant experience
    * Knowledge of Computer Aided Engineering tools
    * Ability to work in multi-disciplinary design and development teams
    * Experience to Static and/or Dynamic Analyses
    * Experience in Engineering Simulation using Finite Element structural analysis (FEA) tools
    such as MSC Patran, Nastran, FEMAP, or ANSYS
    * Experience performing fatigue and damage tolerance analysis utilizing tools such as NASGRO or AFGROW
    * Ability to perform classical analysis using industry standard hand calculation methods
    * Knowledge of industry-standard mechanical design principles, to include, but not limited to
    parametric design, model-based definition, material hardware selection, manufacturing and
    production processes
    * Ability to author substantiation reports
    * Background in the Aerospace and Defense Industry
    * The ability to obtain and maintain a Security Clearance may be required.

    To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful
    permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to
    obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

    If you are interested in this Structural Engineer III-Thermal Protection Systems job in Louisville, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

     
    Job Number: 311059
    Job Location: Louisville, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 03/31/2021
    Last Updated: 05/11/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineer III

    Description:
    A Structural Engineer III job in Englewood, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 6 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance required.

    Structural Engineer III Job duties:

    * Examine complex metallic and composite structures and systems
    * Familiarity with aircraft structure/construction
    * Familiarity with industry standard analytical methods (Niu, Bruhn, etc.)
    * Experience in both classical structural analysis and finite element analysis of metallic and composite aircraft primary and secondary structure
    * Ability to prioritize workloads and show flexibility to changing situations / demands
    * Ability to communicate with all levels of management, customers, and individual contributors

    Qualifications:

    * Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 6 or more years of relevant experience
    * Demonstrate working knowledge of regulatory and applicable airworthiness criteria including Mil-hdbk-516C and/or 14 CFR Part 25 and Part 23
    * Knowledge and experience of aircraft modification programs
    * Experience in damage tolerance analysis of metallic aircraft structure
    * Experience with MSC Patran/Nastran or Siemens Femap/NX Nastran
    * Solidworks and/or CATIA experience. Understands Product Lifecycle Management
    * Experience in Structural Dynamics/Vibration analysis
    * Experience with narrow body transport category aircraft
    * Experienced in execution of government contracts
    * Experience in integrating mission systems across a wide variety of primary/secondary structure
    * Experience in VBA programming

    If you are interested in this Structural Engineer III job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

     
    Job Number: 311283
    Job Location: Englewood, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 04/06/2021
    Last Updated: 06/18/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Stress Engineer II

    Description:
    A Structural Stress Engineer II job in Louisville, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering or other related discipline and 3 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance may be required.

    Structural Stress Engineer II Job duties:

    * Support the development of primary and secondary structures for spacecraft
    * Design, analysis, production, testing, and integration of development and flight hardware.
    Understand, plan, and execute technical activities in accordance with company policies,
    procedures, and work instructions and specific Customer requirements
    * Originate specifications, control documents, verification and validation plans, procedures,
    reports, or other documentation in support of design and development activities
    * Prepare material for, and conduct, periodic design reviews.
    * Execute engineering design and development activities consistent with Customer quality,
    cost, and schedule requirements

    Qualifications:
    * Requires a BS in Mechanical Engineering or equivalent.
    * 3+ years of relevant experience
    * Familiarity with fiber reinforced polymer composites analysis including classical laminate
    theory and finite element modeling techniques
    * Static test analysis and test correlation
    * Fiber reinforced polymer composite materials
    * Structures for aircraft, spacecraft, or launch vehicles
    * Laminate optimization
    * Dynamic loads analysis
    * Development and application of spacecraft and aircraft loads and environments
    * Progressive failure analysis and damage tolerance
    * NASA and/or FAA structural design standards
    * The ability to obtain and maintain a Security Clearance may be required.

    To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful
    permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to
    obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

    If you are interested in this Structural Stress Engineer II job in Louisville, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

     
    Job Number: 312214
    Job Location: Louisville, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 05/04/2021
    Last Updated: 06/18/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: BarrySparks
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Technician III

    Description:
    A Structural Technician III job in Colorado Springs, Colorado is available with one of Belcan's top aerospace clients. In this job you will be using your skills and expertise to perform variety of our operations procedures to assemble and/or create major assembly structures and minor part-fitting operations. You'll be responsible for modifying incomplete and complete assemblies and incorporating the changes into the structure, monitoring and verifying quality in accordance with statistical process or other control procedures, and performing various maintenance duties.

    Requirements:
    * High school diploma or GED equivalent and at least 5 years of relevant experience
    * A higher-level degree may substitute for experience
    * Related experience may be considered in lieu of required education
    * Possess a high degree of technical competency
    * Ability to understand and interpret technical schematics and diagrams, especially electrical
    * Aircraft structural modification experience
    * Repair station experience
    * C-130 airframe experience
    * An active Secret U.S. Security Clearance is required

    If you are interested in this Structural Technician III job in Colorado Springs, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

     
    Job Number: 310073
    Job Location: Colorado Springs, CO
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 03/03/2021
    Last Updated: 06/11/2021
    Firm Name: BELCAN TECHSERVICES
    Attention: ScottWatkins
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Website: www.belcan.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures MRB Engineer - Special Missions

    Description:
    Inconen is looking for a Structures MRB Engineer - Special Missions for our client, a well-known Aerospace Company, in Savannah, GA.

    ** Candidates must be a U.S. Citizen or Permanent Resident **

    Unique Skills:
    - Bachelors degree in Aerospace or Mechanical Engineering.
    - Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
    - 1st Shift Position Typically 4X10 work schedule. Occasional overtime possible.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2.The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15163
    Job Location: Savannah, GA
    Rate: $66.67 - $71.43/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/19/2021
    Last Updated: 06/23/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures MRB Engineer - Special Missions (Weekend Day Shift)

    Description:
    Inconen is looking for a Structures MRB Engineer - Special Missions (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

    ** Candidates must be a U.S. Citizen or Permanent Resident **

    Unique Skills:
    - Bachelor’s degree in Aerospace or Mechanical Engineering.
    - Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Gulfstream GV/G550 experience a plus.
    - Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
    - Experience should be in a Production and/or schedule-driven environment.
    - Supporting structural a/c modifications a plus.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Corridor, Word, Excel)
    - Weekend Shift position. Typically, 4X10 work schedule. Occasional overtime possible.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2.The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 15162
    Job Location: Savannah, GA
    Rate: $66.67 - $71.43/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/19/2021
    Last Updated: 10/21/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures Mechanic

    Description:
    • Active Secret Clearance Required
    • • Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.
    Skill Matrix:
    Structures Yes 1 6+ Years
    U-2 Yes 1 2 - 4 Years
     
    Job Number: CJH-5742
    Job Location: Edwards AFB, CA
    Rate: 32.64
    Per Diem: YES
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 06/08/2021
    Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
    Attention: Venkat Mantha
    Address: 687 LEE RD STE 350
    City, State: ROCHESTER, NY 14606
    Phone: 845/473-1137
    Website: www.iic.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Supply Attendants

    Description:
    STS Technical Services is hiring Supply Attendants in Atlanta, Georgia.

    Supply Attendant Responsibilities:
    The Supply Attendant is responsible for warehousing and distribution of aircraft parts and related materials within logistics operation.
    Duties include, but are not limited to: data accuracy, compliance processes, packaging preservation, proper binning, issuing, receiving and shipping of material managed in the stores operation.
    Further responsibilities include, but are not limited to: responsible for safe operation of mechanical and manual material handling equipment; responsible for safe operation of company vehicle.
    Qualifications:
    Must have a valid driver's license and High School Diploma.
    Must be able to work ANY shift this is a 24/7 operation. Nights/weekends/holidays.
    Should possess the ability to meet deadlines with high productivity and accuracy.
    Prefer experience in warehousing and logistics.
    Must be a team player with focus on customer service.
    Must be able to work a flexible schedule including weekends and holidays.
    Must be willing to work rotating shifts and weekends.
    Additionally, candidate must be able to read and write English and have some working knowledge of personal computers.
    Must be able to work well with others.
    Must be able to work in a safe manner and be able to lift up to 80 lbs utilizing proper equipment or assistance.
    Must be performing satisfactorily in present position.
    About STS Technical Services:

    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.

    #ZR
     
    Job Number: 36738
    Job Location: Atlanta, GA
    Input Date: 05/11/2021
    Firm Name: STS AEROSTAFF SERVICES
    Attention: Megan Shelton
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer 2

    Description:
    SSE is looking for Systems Engineer 2 to fill a role in St. Louis, MO.

    FULL BENEFITS: includes 12 PAID HOLIDAYS & 13 PTO DAYS per year (NO WAIT PERIOD), 401k match.

    JOB DESCRIPTION:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify basic lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Supports the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes.

    SKILLS/QUALIFICATIONS

    Basic Required Qualifications:
    • Must have the ability to be granted special program access, which requires US Citizenship.
    • Must be willing to meet work assignment/travel requirements.

    Desired Experience, Skills and Qualifications:
    • Good understanding of Air Vehicle and Mission Systems
    • A basic understanding of Aircraft Reliability and Maintainability concepts and tools

    Typical Education:
    • Bachelor’s Degree or higher in Engineering
    • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent.
    • ABET accreditation is the preferred, although not required, accreditation standard.

    Typical Experience:
    • Using a variety of media, clearly conveys information and ideas to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
    • Takes steps to develop and maintain the knowledge, skill, and ability to perform.
    • Work with the project teams to ensure process rigor on Air Vehicle projects as well as Mission
    Systems projects.

    • “This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.” US Citizen required.

    Travel Comments:
    • Occasional travel (10%) may be required in support of the program and customer.
     
    Job Number: 44783
    Job Location: St. Louis, MO
    Rate: BOE
    Per Diem: No
    Overtime: possible
    Duration: 12 months
    Start Date: TBD
    Input Date: 04/21/2021
    Firm Name: SSE INC
    Attention: Justin Udany
    Address: 9666 OLIVE STE 710
    City, State: ST LOUIS, MO 63132
    Phone: 314/439-4728
    Website: www.sseinc.com/careers

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer - Engine Control Requirements Development

    Description:
    This position is responsible for developing system requirements for a new aircraft turbine propulsion control system. Technical Lead experience is a PLUS.

    REQUIRED SKILLS:
    * Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
    * Aerospace propulsion engine controls product experience
    * System Requirements Development experience including allocation of requirements to software and hardware
    * System Development Process knowledge
    * Model-based Software Development Process knowledge
    * Hardware Development Process knowledge
    * System Change Request (SCR) Process experience
    * Certification Guidelines knowledge: ARP-4754, DO-331, DO-178, DO-254
    * DOORs proficiency
    * Effective Communication Skills (both verbal and written)
    * Self-motivated, Accountable, Detail-oriented

    Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

    ABOUT THE COMPANY:
    Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

    This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

    RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

    To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
     
    Job Location: Phoenix, AZ
    Rate: Open
    Per Diem: No
    Overtime: StTm/OT
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 07/30/2021
    Last Updated: 08/06/2021
    Firm Name: REAL TIME CONSULTING
    Address: 20601 N 19TH AVE STE 110
    City, State: PHOENIX, AZ 85027
    Phone: 623/792-8946
    Website: www.real-time-consulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Engineer

    Description:
    General Summary:
    The Tool Design Engineer develops and designs tools to support aircraft manufacturing in compliance to engineering requirements and the manufacturing process. Tool Design Engineer will be responsible to coordinate and facilitate design reviews both internally and with external suppliers working interdepartmentally as needed. The perspective candidate should be an experienced professional with knowledge of aircraft tooling, aircraft manufacturing processes and ASME Y14.5 Geometric Dimensioning and Tolerancing.

    Duties and Responsibilities:
    • Reviews tool requests, engineering models and drawings for development of new tool designs or tool modifications.
    • Develops concepts for tools in support of new engineering development.
    • Develops 3D models and 2D drawings to design production tooling to support program requirements.
    • Develops and writes tool usage guidelines for tool functionality.
    • Coordinates and facilitates both internal and external tool design reviews to ensure tool. design compliance to Engineering and Manufacturing requirements.
    • Develops advanced tool design concepts and recommends improvements to tool design. processes, procedures and philosophies.

    Education, Work Experience, Certification and/or Licensure:
    • Associates degree in technical field, Bachelors' degree preferred.
    • Minimum 8 years of experience with aircraft tool design.
    • Proficient in Catia with minimum 15,000 hrs.
    • ASME GDTP (Geometric Dimensioning and Tolerancing Professional) Certificate preferred.

    Knowledge, Skills and Abilities:
    • Broad knowledge and experience in tooling for commercial or general aviation aircraft.
    • Experience with composite tooling, assembly tooling, automation, tool fabrication practices, machining practices, and metrology concepts (laser tracker/CMM).
    • Experience with master tooling, datum scheme development, and major structural assembly tool development.
    • Proficient in GD&T.
    • Strong oral and written communication skills.
    • Working knowledge of Microsoft Office Suites (Word, Excel, Power Point and Lotus Notes).
    • Excellent analytical and problem solving skills and attention to detail.
    • Strong interpersonal skills.
    • Ability to multitask.

    Physical Requirements:
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
     
    Job Number: 28-018
    Job Location: Greensboro, NC
    Rate: D.O.E.
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 04/30/2021
    Last Updated: 05/14/2021
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    UAS Electrical and RF Engineer - Payloads

    Description:
    Description: Our Client is looking for highly talented Unmanned Aerial Systems (UAS) Electrical and RF Engineer-payloads. You will be responsible for research & development, upgrading & updating, maintaining the Avionics, RF subsystems, and payload system of an electric aircraft from product manufacturing to product end-of-life.

    Purpose: The UAS Electrical and RF Engineer-payloads under Swift-X will be at the forefront of R&D for current and future products to advance our technologies' positive impact on a global scale.

    Duties and Responsibilities:


    Update, maintain, and sustain avionics and RF engineering drawings
    Update, maintain, and sustain aircraft subcomponent inventory
    Design, update and troubleshoot EMI/EMC to minimize noise in the system
    Develop wire harness design, fabrication drawings, electronics prototyping, soldering, analog and digital circuitry, high speed and low speed CAN
    Develop payload systems solutions to advance real-time data collection
    Establish integration, process, and procedures for payload systems operation
    Update, maintain, and sustain avionics and RF wiring harnesses and subsystems
    Implement incremental avionics design improvements
    Aid anomaly investigations and determine required avionics or RF repairs
    Support avionics and RF production activities
    Update, maintain, and sustain avionics engineering documentation
    Interface with distributors regarding product issues
    Track and remedy field avionics issues
    Support and maintain engineering processes
    Track electronic component obsolescence activities
    Lead electronic BOM cost-out activities

    Qualifications:

    5+ years in Electrical Engineering, Aeronautical engineering, physics, or other related discipline with equivalent experience
    Experience in Design or Test of embedded systems incorporating many of the following:
    Interface with ISM band radios (any of the: 900MHz, 2.4GHz, 5.8GHz bands)
    Communication protocols for narrowband and Spread spectrum (Direct sequence and or frequency hop cellular radios)
    EO/IR sensor devices /subsystems
    Analog and digital Sensor interfaces and protocols
    Control of Gimbal based devices
    Good understanding of board design and component placement/layout of mixed digital, analog, and RF electronics and antennas to prevent EM interference and susceptibility.
    Experience creating, tracking, and updating product Bill of Materials (BOMs) and Engineering Drawings
    Ability to create and review REV controlled electrical engineering drawings that helps to define and illustrate specific requirements, processes, and designs.
    High degree of comfort with using hardware and software test tools (oscilloscopes, logic analyzers, Spectrum analyzers, Multimeters, RF power meters, vector scopes, antennae pattern analysis)
    Coordinates manufacturing, construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and design requirements
    Inspects completed installations and observes operations to ensure conformance to design and equipment specifications and compliance with operational & safety standards
    Troubleshoots complex systems such as avionics, embedded systems, and Radio Frequency (RF) links, supporting Flight Test operations
    Performs design and analysis tasks under general supervision and may be involved in developing budgets, estimating labor, material, and construction costs. Demonstrates familiarity with HDL programming, C/C++, PCB design process and UAV subsystems along with associated software
    Assesses root cause to critical issues and contributes to sustainability and reliability of products. Consistent in demonstrating ability to research and re-engineer to propose alternate solutions to issues. Demonstrates full understanding & knowledge of engineering principles within the specific technical discipline.
    Hands-on experience in integrating electro-mechanical systems
    Candidates must be US Person for compliance with ITAR (International Traffic in Arms Regulations)
     
    Job Number: 82867
    Job Location: South Orange County, CA
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: Contract, Contract to Hire or Direct Hire
    Start Date: ASAP
    Input Date: 04/21/2021
    Firm Name: MOTIVE WORKFORCE SOLUTIONS
    Attention: Kristan Anderson
    Address: 5122 BOLSA AVE STE 112
    City, State: HUNTINGTON BEACH, CA 92649
    Phone: 714/901-3804
    Fax Phone: 714/901-3814
    Website: www.2roads.com

    Back to Advanced Job Search