Job Search Results

372 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/03/05 Friday 09:25PM Pacific Time by ContractJobHunter. )

Listings 1 - 372

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
59955 | Propulsion System Controls Engineer

Description:
Propulsion System Controls Engineer

Location: Fort Worth, TX (76118)

Job ID: #59955

12 month contract

The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements.

Position Responsibilities:

• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:

• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:

• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:

• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

Hours:8:00am to 5:00pm

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

Job Number: 59955
Job Location: Fort Worth, TX
Duration: 12 month
Start Date: Jan/Feb 2021
Input Date: 01/06/2021
Last Updated: 02/09/2021

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Accountant

Description:
Accountant

Job ID # 2021-12293

Contract Opportunity

Location: Lexington, KY

Industry: Aerospace & Defense

Minimum Clearance: Interim Secret Clearance

Minimum Education: Bachelor’s Degree

What You’ll Do:

Apply principles of accounting to analyze financial information and prepare financial reports.
Maintain or oversees the control of accounts and records in such areas as disbursements, expenses, tax payments, and income.
Compile and analyze financial information to record transactions, prepare reports, and review and verify accuracy.
Prepare balance sheet and profit and loss statements, consolidated financial statements, and other accounting schedules and reports.
May design, modify, install, and/or maintain accounting systems to ensure an adequate recognition of financial transactions.
Responsible for the adherence to and communication of accounting and auditing policies and procedures.
Ensure vendors are paid in a timely manner, makes sure all requirements are met prior to payment.
Work with Global Supply Chain and Sourcing to make sure items are received in prior to payment.
Upon vendor request, sends report with payment details, monitors Accounts Payable accrual, especially at month-end, quarter-end and year-end, to ensure accrual is accurate.
What You’ll Need:

Interim Secret Clearance
Software Skills:
MS Excel

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12293
Job Location: Lexington, KY
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 3 Months
Input Date: 01/12/2021

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Administrative Assistant - Sr 2

Description:
PDS Tech, Inc. is seeking a Administrative Assistant - Sr 2, in Cedar Rapids, IA.,
Job Description

-Performs complex administrative activities in close relationship to the day-to-day work of the department(s) supported.
-May support one or more individuals, but normally works in a confidential and highly responsive relationship with management at a more senior level of responsibility and discretion (Director/Vice President).
-May support management of multi-functional diverse areas.
-Tracks and maintains departmental budgets and assists management in determining budget requirements.
-Types and assembles complex data (i.e., tables, charts, reports and memorandums) under general direction; applies a sound working knowledge of equipment capabilities to plan details of formatting, spacing and page layout.
-Composes/edits letters and memorandums that require an excellent working knowledge of departmental functions.
-Screens telephone calls and business visitors and applies departmental knowledge in response to questions; routes inquiries to appropriate personnel or department. Interfaces with all levels of client personnel and external contacts to coordinate departmental efforts and exchange information requiring moderate interpretation or discussion.
-Schedules appointments, determining priorities and maintaining calendars.
-Establishes, maintains and reviews departmental files; maintains control files on confidential/high priority matters and follows up on outstanding issues when required.
-May prepare materials and agenda for departmental and/or management meetings.
-May be required to attend meetings, seminars, etc., to take notes or furnish information.
-May be responsible for following up on assignments of department, committee, assigned group, etc., to ensure decisions are implemented and appropriate person are notified.
-Responsible for maintaining knowledge and proficiency in state-of-the-art office automation systems to enhance productivity and continuous process improvement.
-Identifies, initiates and coordinates projects to fulfill departmental administrative needs.
-Researches, compiles and analyzes data to prepare reports, tables, charts and graphs.
-Establishes, maintains, and revises personnel records and confidential departmental files including statistical information and financial data.
-Attends meeting and conferences to represent organization by furnishing information and taking notes.
-Clarifies Company policies related to department activities.
-Interfaces with all levels of client personnel and with external contacts to coordinate departmental efforts and exchange information requiring extensive interpretation or discussion.
-May train, guide, or assign work to less experienced Administrative staff.
-May be required to pass a typing test and take shorthand.

-Ability to operate various office machines and equipment.

-Requires knowledge, utilization and proficiency in use of a variety of software packages.

-Requires extensive understanding of office practices and administrative policies and procedures.

-Must be able to establish and maintain effective working relationships with all levels of Rockwell personnel and external contacts.

-Ability to effectively communicate orally and in writing is required.

-High School Diploma or equivalent plus 9 years experience.

Attributes:

Cooperation - Takes personal initiative to proactively serve as team motivator creating strong morale and synergy.

Coordinating - Ensures that information has been received and accurately understood by all parties.

Customer Service Orientation - Provides customers with quality experiences, establishing and maintaining effective relationships.

Dependability - Ensures that all details of a project are accurate before delegating to others.

Detail Orientation - Rarely makes errors but accepts responsibility for those that are made and develops a plan to prevent similar errors from recurring.

Information Management - Uses various software packages to prepare and review documents and records.

Relationships - Develops relationships with others that are based on trust.

Stress Tolerance - Maintains a calm and positive outlook during stressful situations.

REQUIRED:

-US Citizenship

-Proficient in Excel and PowerPoint

-Familiar with Outlook and Google email

-Familiarity with Concur is a plus

-Above average organizational skills and ability to multi-task

Job Number: 2010120275
Job Location: Cedar Rapids, IA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PAmNQAW&URLSource=cjhunter

Aero Logistics Engineer

Description:
PDS is seeking an Aero Logistic Engineer, Fort. Worth, TX.

Summary:

Demonstrates a working knowledge and the requisite skill sets to work within the IPT/organization.
Performs all assigned tasks to an acceptable quality standard with minimal supervision.
Compliant to company processes, procedures, and applicable government regulations.
Support and assist in data preparation and presentation for program reviews and perform other work as directed.
Perform to a set of performance metrics and measurements that give visibility to cost and schedule objectives.
Performs other duties as required.

Position Requirements:

Needs someone with more of a maintenance background – preferably Military background
A&P is preferred but not required
Helicopter experience is a plus
Technical Writer experience is preferable

Education Requirements:

High School diploma or equivalent.
Bachelor's Degree is preferred.

Position Requirements:

Experience in Military logistics and/or experience in aviation logistics preferred.
Must have strong analytical skills.
Must be experienced with the Microsoft software suite.
Must have excellent communication skills.
Position Requirements:
Needs someone with more of a maintenance background – preferably Military background
A&P is preferred but not required
Helicopter experience is a plus
Technical Writer experience is preferable

Job Number: 2010122169
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 12/02/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PGllQAG&URLSource=cjhunter

Aerodynamics Engineer

Description:
PDS Tech Inc is seeking Acoustics Test Engineer in Ann Arbor, MI

Benchmarking using CATIA data, drawings, vehicles and test results
Vehicle evaluation planning, testing and reporting
Study results, propose and develop countermeasures to improve wind noise or aerodynamics
Other duties as assigned

Required Technical Skills:

3+ years’ hands-on experience with vehicle mock-up for wind noise and/or aerodynamic evaluation

3+ years’ experience using acoustic measurement equipment
1+ years’ experience using pressure data acquisition & analysis software
Ability to read and understand component part and assembly drawings
Capability to utilize CATIA for part and system analysis

General Requirements:

BS or MS in mechanical or aerodynamics/aerospace engineering

Knowledge and understanding of aeroacoustic phenomena
On-road and in wind tunnel wind noise testing experience
Ability to communicate technical data with clear conclusion in a visual format

Job Number: 2010121669
Job Location: Ann Arbor, MI
Duration: 24 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PEh5QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Rotorcraft Flight Control Systems Engineer, Fort Worth, TX

Description:
Aerospace Rotorcraft Flight Control Systems Engineer, Fort Worth, TX
JR-020008

Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

Aerospace Rotorcraft Flight Controls Engineer

You Will:
Flight Controls engineer is a multi-skilled technical person capable of providing expertise in conceptual design, development, integration, and verification and test algorithms for the Advanced Helicopter. This position will employ the skills above to assist in progressing overall Flight Controls system conceptual design readiness for a proposal response of the Advanced Helicopter program of record. The position requires coordination across system and program boundaries as the Flight Controls IPT representative to ensure alignment of air vehicle systems. This position will also develop Flight Control Systems content for the Advanced Helicopter program of record proposal related to all aspects of Flight Control Systems development, specifically hardware, software, control strategy, and verification, as well as, manage and provide status updates on the development, schedule, and risk associated with Flight Control System content readiness.

You’ll Need:

• At least 8 years of relevant Flight Control Systems experience with a focus in any of the following: hardware, software, systems integration, or control laws.
• Previous proposal experience is preferred
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• RTCA DO-160, MIL-STD-810, RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems, and multiple data protocols
• Experience with Enovia, DOORS, and Serena Dimensions
• Development of system requirements, architectures, and schematics.
• Experience with current industry software languages and practices
• This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)

Education: Bachelor’s Degree is required. Major in Aerospace, Mechanical, Electrical, or Software Engineering or Computer Science is preferred. Related degrees with relevant experience will be considered.

Years of Experience: At least 10 years of relevant experience in aerospace industry is required. Experience in Helicopter flight controls is preferred.
Citizenship: US person

Skills & Experience
Electronic Engineering, Embedded Systems Engineering, Systems Engineering, System Software Development
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
Apply

Application Web URL Address:

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/FCS-Software-Engineer_JR-020008

Job Number: JR-020008
Job Location: Fort Worth, TX
Input Date: 01/11/2021

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Assembler B

Description:
PDS Tech, Inc. is seeking an Assembler B, in El Segundo, CA.

Typical Duties and Responsibilities:
• Works from test and planning documents, circuit and product diagrams, equipment manuals, and verbal and written instructions.
• Lays out and determines standard methods and sequences to test and troubleshoot complex digital electronic subassemblies, slices and units by performing operations such as inspections, wirechecks, component verifications, and functional testing under various environmental conditions.
• Sets up the test configuration by making all cable connections between the item-under-test and the station. Secures connectors to the proper torque where required.
• Reviews test data for failures and fills out paperwork to report failures.
• Operates commercial and custom test equipment including computer controlled test stations, oscilloscopes, digital multimeters, logic analyzers, chart recorders, and thermal chambers.
• Uses, interprets and critiques circuit and product drawings, and test documents such as specifications and procedures.
• Uses application software on test stations that run under various operating systems, and able to execute batch files.
• Troubleshoots flight hardware under the guidance of an engineer. Fills out paperwork to rework the hardware.
• Troubleshoots and repairs test stations under the guidance of an engineer.
• Sets up test stations for usage by following instructions and diagrams in equipment documents. May involve finding missing equipment and cables.
• Reviews and prepares test data for unit selloff.
• Uses computer application software such as word processing and spreadsheets.
• Performs incidental related duties as assigned or required.Takes units through environmental testing at other facilities by scheduling use of facility, moving equipment to test facility, setting up unit, and testing the unit during the environmental exposure.

Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

Job Number: 2010120985
Job Location: El Segundo, CA
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PCl8QAG&URLSource=cjhunter

Assembler B

Description:
Chipton-Ross is seeking an Assembler B located in El Segundo, CA.

RESPONSIBILITIES:
Operates a variety of advanced computer assisted and computer controlled and manual test equipment to functionally test digital and analog electronic subassemblies, slices, and units or equivalent in accordance with engineering specifications.
Works from test and planning documents, circuit and product diagrams, equipment manuals, and verbal and written instructions.
� Lays out and determines standard methods and sequences to test and troubleshoot complex digital electronic subassemblies, slices and units by performing operations such as inspections, wirechecks, component verifications, and functional testing under various environmental conditions.
� Sets up the test configuration by making all cable connections between the item-under-test and the station. Secures connectors to the proper torque where required.
� Reviews test data for failures and fills out paperwork to report failures.
� Operates commercial and custom test equipment including computer controlled test stations, oscilloscopes, digital multimeters, logic analyzers, chart recorders, and thermal chambers.
� Uses, interprets and critiques circuit and product drawings, and test documents such as specifications and procedures.
� Uses application software on test stations that run under various operating systems, and able to execute batch files.
� Troubleshoots flight hardware under the guidance of an engineer. Fills out paperwork to rework the hardware.
� Troubleshoots and repairs test stations under the guidance of an engineer.
� Sets up test stations for usage by following instructions and diagrams in equipment documents. May involve finding missing equipment and cables.
� Reviews and prepares test data for unit selloff.
� Uses computer application software such as word processing and spreadsheets.
� Performs incidental related duties as assigned or required.Takes units through environmental testing at other facilities by scheduling use of facility, moving equipment to test facility, setting up unit, and testing the unit during the environmental exposure.

REQUIRED EXPERIENCE:
* Vision Requirements: Color Vision, Level 2; Visual Acuity, Near 20/20 and Visual Acuity, Far, 20/30

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM

Job Number: 188101
Job Location: El Segundo, CA
Rate: $DOE
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Assembler C

Description:
Chipton-Ross is seeking a Assembler C for an opening in Sylmar, CA.

RESPONSIBILITIES:
Performs complex production assembly operations on structural parts, mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual or automated assembly tools.
� Assembly, packaging and test of optoelectronic products
� Hands-on experience in fiber optic & microelectronic device packaging, including working with packaging materials, mechanical components, optical components attachment methods and materials, as well as other optoelectronic and microelectronic package assembly processes.
� Experience aligning and assembling packaged optical components for use in optical fiber communications or other semiconductor devices.
� Familiarity and comfort of working with optical fibers
� Hands-on experience in alignment and assembly of fiber optical components as well as optical coupling alignment of optical fibers
� Must be able to operate, setup and prepare wire bonders, wedge bonders and wire pullers (manual and automatic bonders)
� Ability to work with very small components, including handling with tweezers and possess fine manual dexterity
� Ability to conduct inspection of devices and operate under a microscope.
� Knowledge of precision soldering including SMT repair of PCB boards.
� Ability to use various, die attach, optical and other adhesives and epoxies
� Knowledge of basic test equipment: DVM, micrometers, calipers, comparators
� Able to work based on travelers, schematics, drawings and engineering directions, perform tasks carefully, document work thoroughly and observe and detect any significant departures from normal process behavior.
� Good verbal and written communication skills. Must be able to understand work instructions and modify as needed and maintain good and effective communication with management, engineering, and technician peers to continuously improve products and processes
� Good computer skills including use of Microsoft Office and ability to learn and operate specialty software
� Familiarity with ESD practices and LASER safety protocols
� Conduct precision assembly and test of optoelectronic components
� Operate, setup and perform basic troubleshooting of wire and wedge bonders, and wire pulling equipment
� Handle devices that include optical fibers
� Operate custom test equipment, that involves illumination by lasers and work in laser goggles when required
� Prepare reports as needed
� Functions are subject to change to meets the needs of the Company.
� Supports the implementation of engineering and production changes throughout product life cycle.
� Proactively identifies issues and offers solutions to the team.

REQUIRED EXPERIENCE:
Minimum of 5 (five) years of optoelectronic precision assembly experience that includes skills described in the Skills/Knowledge/Abilities section
Position Comments: **** MUST HAVE
Assembly, packaging and test of optoelectronic products
� Hands-on experience in fiber optic & microelectronic device packaging, including working with packaging materials, mechanical components, optical components attachment methods and materials, as well as other optoelectronic and microelectronic package assembly processes.
� Experience aligning and assembling packaged optical components for use in optical fiber communications or other semiconductor devices.
� Familiarity and comfort of working with optical fibers
� Hands-on experience in alignment and assembly of fiber optical components as well as optical coupling alignment of optical fibers
� Ability to work with very small components, including handling with tweezers and possess fine manual dexterity
� Ability to conduct inspection of devices and operate under a microscope.
� Knowledge of precision soldering including SMT repair of PCB boards.
� Ability to use various, die attach, optical and other adhesives and epoxies

WORK ENVIRONMENT:
� Sitting at Inspection Microscope for long periods.
� Daily use of computer and other equipment as required.
� Demonstrated manual dexterity in handling tiny parts with tweezers
� Must be able to attain soldering certifications

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

**AS degree in a STEM discipline is preferred. Requires a High School Diploma and/or equivalent.
Experience**

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

Job Number: 188077
Job Location: Sylmar, CA
Rate: $DOE
Duration: 9 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AutoCAD Specialist

Description:
Develops Computer-Aided Design (CAD) drawings.
Works closely with design originators, preparing drawings or computer models of unusual, complex, or original designs that require a high degree of precision
Assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawings produced.
Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent.
Although working primarily as a drafter, may occasionally interpret general designs prepared by others to complete minor details

Extensive experience with AutoCAD, including Autodesk® Inventor 3D CAD Software.
Understanding of configuration management of 3D and 2D data.
Able to accurately obtain mechanical measurements using calipers, micrometers, height, pin, thread, and radius gauges.

Security Clearance Required

Job Number: 49302
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 01/04/2021

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed

Job Location: Midwest
Input Date: 11/23/2020

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer

Description:
The primary responsibilities will include design, manufacture, integration, and testing of custom circuit boards and embedded system components.

MUST HAVE:
• 5+ years experience including analog and digital PCB design for aerospace industry
• Experience assembling, testing, and troubleshooting prototype circuit designs and PCB assemblies
• Working knowledge of sensors and flight test instrumentation, analog and digital signals
• Experience integrating COTS components including navigation, air data, and communication equipment into airframes
• Experience developing and refining system level requirements from formal and informal sources
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
• Ability to read and create wiring diagrams and troubleshoot wiring on test bench or on vehicle
• Excellent communication skills — able to partner internally and research and interact with potential suppliers

NICE TO HAVE:
• Experience with manned experimental aircraft flight testing
• Experience integrating COTS components including navigation, air data, and communication equipment into airframes
• Experience developing software on microcontrollers
• Exposure to a variety of aircraft hardware development standards

DEGREES AND CERTIFICATION:
• An undergraduate degree in Aerospace, Electrical, or Mechanical Engineering, or Computer Science is required
• A master’s degree in Aerospace, or Electrical Engineering is preferred
• Pilot's license and/or Aircraft Mechanic (A&P) license is a strong plus

Job Number: 45-004
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possbile
Duration: 1+years
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer

Description:
• Help with the numerous software development tasks. Support Jenkins pipeline development, avionics backlog work, continued DAS cleanup work, silicon bird development, etc.
• Requires a strong C++ developer

Qualifications:
• 5+ years industry experience, ideally in aerospace or automotive software development
• Exposure to a wide variety of aircraft software development standards
• Significant experience in C++
• Experience with real time operating systems and process scheduling
• Experience interfacing with I/O hardware including analog, discrete, and serial data
• Experience with socket programming and network communication including an understanding of the physical, data, network, and transport layers
• Experience developing automated test suites
• Excellent communication skills — able to partner internally and research and interact with potential suppliers

Ideal Qualifications:
• Experience as the responsible engineer for critical components of an aircraft avionics suite
• Experience with continuous integration tools
• Experience with Python, shell scripting
• Experience developing and refining system level requirements from formal and informal sources

Job Number: 45-003
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD DRAFTER, Bloomington, IL

Description:
CAD DRAFTER, Bloomington, IL, JR-019689

• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defense, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

We are looking for a CAD Drafter. You will learn on the job all necessary skills required to draft and design Telecommunications wireless projects. You will learn to draft in multiple CAD platforms and navigate proprietary software systems required to complete technical telecommunication design packages that will be used for zoning, permitting, final design and construction. You will will also design fiber optic cables, above and below ground equipment cabinets, telephone poles and other underground structures and draft them in an accurate and error-free design package to be delivered to the customer. You will report directly to the Engineering Section Manager in our Erie, PA office.

Position located in the Erie, PA office. Candidate must have reliable transportation to & from office on a daily basis.

You Will:

• Create Telecommunication Engineering designs and layouts.
• Create AutoCAD drawing packages and permit drawings for wireless sites.
• Interpret engineering designs, redlines and incorporate into A&E drawing packages.
• Develop necessary templates used to create AutoCAD drawing packages.
• Work with senior designers to develop drawings, calculations and equipment applications for the telecom industry using AutoCAD.
• Organize and analyze drawings before set up and discuss project complexity and time estimates with technical and supervisory personnel.
• Provide technical support to design engineers, project managers and other technicians.
• Maintain project drawing files, drawing library, and associated records and documentation per company policies.

You'll Need:

• High School diploma
• 2+ years of experience in drafting (civil, electrical or architectural industry preferred)
• 2+ years of experience in AutoCAD (2018), MicroStation or other CAD program.
• Proficient in Microsoft Office programs.
• 1 year of experience with interpreting utility, topographic, street or profile maps is preferred.
• Reliable transportation to the office on a daily basis

Skills & Experience
auto cad, Microsoft Excel User, Telecommunications
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

Job Number: JR-019689
Job Location: Bloomington, IL
Input Date: 02/15/2021

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Lead Electrical Engineer

Description:
CL - Lead Electrical Engineer

Job ID # 2021-12263

Contract Opportunity

Location: Fairfax, VA

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

What You’ll Do:

Successful execution of the Electrical Engineering efforts for the program
Lead a small team of EEs through the development lifecycle of electrical requirements analysis, functional analysis, performance analysis, design, development, integration, and test
Provide root cause analysis for electrical issues, evaluate and implement solutions to resolve those issues using the appropriate standards, processes, procedures, and tools
Perform detailed research and technical analysis to design and lead the team to develop cable drawings and schematics (vendor products, COTS components, GFE/CFE, specifications, manuals, etc)
Lead the team to generate and maintain electrical documentation (plans, specifications, design documentation, etc)
Substantial contribution to electrical and cable reviews of components, equipment, and systems
Evaluate vendor capability to support product development
Keep abreast of technology trends
Support new business development, proposals, cost estimates for yearly tasking
Lead by example with strong work ethic and ability to multi-task in a collaborative (team) environment
Effectively communicate issues, impacts, and corrective actions
Provide Engineering briefs for program leadership and customers
What You’ll Need:

Secret Clearance
Travel may be required to support root cause analysis and system integration
Required skills:
AutoCAD
Leadership with ability to plan and generate engineering schedules
Proficient in PDF Redline mark ups to review and instruct changes to other engineers
Proficient use and understanding of Electrical Engineering concepts, principles, and theories
Strong understanding and experience with EE design and manufacturing standards (IEEE, UL, MIL-STD, etc.)
Strong understanding and practical experience with Power and EMI/EMC requirements and corresponding MIL-STDs (e.g. MIL-STD-461)
Experience and working understanding of power systems, power supplies requirements, including 3 phase power
Experience with operating standard test equipment and/or development of custom test equipment
Solid experience with electrical requirements testing, verification, and test procedure development and generation
Grasp and apply new information quickly and effectively handle complex assignments
Strong written and verbal communication and presentation skills
Microsoft Office Products
Bonus Skills:
CREO
Windchill
ARCI or SWFTS submarine system development
SONAR and Towed Array knowledge and experience
AN/BQQ-10 SONAR system
Digital Signal Processing
Large System Integration (preferably Navy DOD environment)
Experience with various disciplines of systems engineering (HW, SW, ILS, etc)
Experience with DTC/DTUPC (Design to Cost/Design to Unit Production Cost)
Agile/DevOps Software Development Life Cycle (SDLC)
Agile certifications or equivalent experience as Scrum Master or Product Owner
Preparation of BOEs (Basis of Estimates) and ROMs

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Electrical Engineering, a related specialized area or field combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12263
Job Location: Fairfax, VA
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Network Design Engineer

Description:
CL - Network Design Engineer

Job ID # 2021- 12264

Contract Opportunity

Location: Taunton Massachusetts

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 2 Years

What You’ll Do:

Perform requirements analysis, requirements definition, requirements management, functional analysis, performance analysis, system design, detail trade studies, systems integration and test (verification), validation and interface definition studies of subsystem or system elements under supervision of the lead systems engineer
Perform technical planning, cost and risk analyses, and supportability and effectiveness analyses for subsystems and system elements
Perform customer requirements analysis, develops system requirements and defines allocations to lower levels (elements and components)
Perform detailed technical analyses for a subsystem or system elements
Develop and evaluate systems, networks and information systems to ensure designs meet applicable governmental security specifications
May provide system accreditation/certification evaluation and test support to ensure all technical security features (e.g., identification, authentication, access control, labeling, and auditing) of the system are considered and function properly
May develop system security documentation on both new and fielded information systemsÂ
Participates in Modeling and Simulation
Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
Support the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the system development life cycle
May provide leadership and/or direction to lower level employees
Independently determines proposed approach to solutions
Contribute to the completion of major programs and projects
Plan and execute project tasks for activities described above
Creative, innovative responsibilities requiring advanced decision-making skills
Define processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility
Demonstrate good judgment in selecting methods and techniques for obtaining solutions
Design a complete and complex framework, system or product
Identify, analyze and resolve system design weaknesses
Regular contact with senior levels of internal work groups
Work under limited direction
Contact with Deputy Program Managers Engineering (DPME) and other professionals within the Engineering department and with project teams across the company
Frequent contact with external customers
What You’ll Need:

Secret Clearance
Proficient use and understanding of systems engineering concepts, principles, and theories
Proficient knowledge of other related disciplines
Proficient with requirements management & system modeling tools
Recognizes various architectural patterns
Proficient in Microsoft Office applications
Proficient written and verbal communications skills
Able to sell concepts and ideas
Creative thinker
Ability to multi-task
Proficient ability to grasp and apply new information quickly and effectively handle complex assignments
Shows initiative on assignments, exercises independent judgment and professionally executes projects with little direction
Proficient ability in communicating issues, impacts, and corrective actions
Proficient ability to clearly report relevant to sound systems engineering design
Network certification (CCDP) desired
Familiarity with network protocol analysis and troubleshooting (e.g., Wireshark)
Agile experience preferred.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Systems Engineering, or a related specialized area or field, combined with 2 + years of relevant work experience; or Master’s Degree.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021- 12264
Job Location: Pittsfield, MA
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Network Design Engineer

Description:
CL - Network Design Engineer

Job ID # 2021-12265

Contract Opportunity

Location: Taunton Massachusetts

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

What You’ll Do:

Perform requirements analysis, requirements definition, requirements management, functional analysis, performance analysis, system design, detail trade studies, systems integration and test (verification), validation and interface definition studies of subsystem or system elements under supervision of the lead systems engineer
Perform technical planning, cost and risk analyses, and supportability and effectiveness analyses for subsystems and system elements
Perform customer requirements analysis, develops system requirements and defines allocations to lower levels (elements and components)
Perform detailed technical analyses for a subsystem or system elements
Develop and evaluate systems, networks and information systems to ensure designs meet applicable governmental security specifications
May provide system accreditation/certification evaluation and test support to ensure all technical security features (e.g., identification, authentication, access control, labeling, and auditing) of the system are considered and function properly
May develop system security documentation on both new and fielded information systemsÂ
Participate in Modeling and Simulation
Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
Support the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the system development life cycle
May provide leadership and/or direction to lower level employees
Independently determines proposed approach to solutions
Contribute to the completion of major programs and projects
Plan and execute project tasks for activities described above
Creative, innovative responsibilities requiring advanced decision-making skills
Define processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility
Demonstrate good judgment in selecting methods and techniques for obtaining solutions
Design a complete and complex framework, system or product
Identify, analyze and resolve system design weaknesses
Regular contact with senior levels of internal work groups
Work under limited direction
Contact with Deputy Program Managers Engineering (DPME) and other professionals within the Engineering department and with project teams across the company
Frequent contact with external customers
What You’ll Need:

Secret Clearance
Proficient use and understanding of systems engineering concepts, principles, and theories
Proficient knowledge of other related disciplines
Proficient with requirements management & system modeling tools
Recognizes various architectural patterns
Proficient in Microsoft Office applications
Proficient written and verbal communications skills
Able to sell concepts and ideas
Creative thinker
Ability to multi-task
Proficient ability to grasp and apply new information quickly and effectively handle complex assignments
Shows initiative on assignments, exercises independent judgment and professionally executes projects with little direction
Proficient ability in communicating issues, impacts, and corrective actions
Proficient ability to clearly report relevant to sound systems engineering design
Network certification (CCDP) desired
Familiarity with network protocol analysis and troubleshooting (e.g., Wireshark)
Agile experience preferred.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Systems Engineering, a related specialized area or field combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12265
Job Location: Taunton, MA
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021

CMM Programmer

Description:
Create, develop, edit, and implement new CMM programs on more complex part applications using Zeiss Calypso software from 3D solid models and 2D drawings; audit, implement, and revise programs as need for continuous improvement

Other positions also available! Jobs updated daily at www.nesc.com

Job Location: Newington, NH
Input Date: 11/23/2020

Firm Name: NESC STAFFING
Attention: Joan
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: joan@nesco.com
Website: www.nesc.com

CNC Machinist

Description:
PDS Tech is seeking a CNC Machinist for an open position in Stratford CT

The ideal Candidate must have:

A well-rounded background as a Machinist.
Experience and proficiency operating manual lathes, milling machines, shop tooling, inspection equipment.
Experience and proficiency associated with the programming, setup and operation of CNC equipment
Experience and proficiency with Mastercam software

Prefer Machinist proficient working with HAAS CNC lathes and milling machines

Job Number: 2010121875
Job Location: Stratford, CT
Duration: 15 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PFWVQA4&URLSource=cjhunter

Chemist

Description:
Coordinate with other Quality Control chemists, R&D researchers and formulation specialty
and other manufacturing departments to ensure high quality standards are always met.

Responsibilities:

Follow cGMP, cGLP, and OSHA guidelines with regard to work practices and safety
Perform a variety of analytical procedures in the analysis of pharmaceutical products and raw materials by various testing techniques including but not limited to Wet Chemistry, GC, HPLC, UV-Vis, FTIR, and Dissolution etc.
Qualify, calibrate, and maintain chemical laboratory equipment
Read, understand and interpret analytical procedures
Document work clearly and perform test accurately
Peer review data and reports
General laboratory maintenance

Skills and Abilities Required:

Minimum 2-3 year of experience in USP method / inhouse method of analysis
Minimum 2-3 years of experience preparing cGMP and other laboratory documents
Minimum 2-3 years of experience with cGMP and FDA regulations
Proficient in chromatography software
Excellent organizational and problem-solving skills
Sound knowledge of laboratory apparatus and equipment and a variety of laboratory techniques and work independently with minimum supervision.
Proficient in Microsoft Word, Excel, and PowerPoint
Experience in HPLC, dissolution handling,
Experience troubleshooting the HPLC and GC
Experience with ICH, DEA, Head Space, and IC regulation knowledge
Proficient in Chromeleon and Chemstation software or other similar 21 CFR compliant software.
USP, BP, EP, and JP methods of analysis
Ensure that all data comply with cGMP, FDA and/or other appropriate regulatory guidelines.

Minimum Education and Experience Required:
Bachelor’s degree in Chemistry with a minimum of three (3) years of laboratory experience, preferably in the pharmaceutical industry; or
Master’s degree in Chemistry with a minimum of three (2) years laboratory experience, preferably in the pharmaceutical industry

Job Number: 2010114052
Job Location: Fenton, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Tom Villhard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OotbQAC&URLSource=cjhunter

Chemist

Description:
Chemist
Direct Hire
Location: Saint Louis, MO (Fenton)
Hours: M-F (8 to 5)
Description:
Coordinate with other Quality Control chemists, R&D researchers and formulation specialists and other manufacturing departments to ensure high quality standards are always met.
Responsibilities:

Follow cGMP, cGLP, and OSHA guidelines with regard to work practices and safety
Perform a variety of analytical procedures in the analysis of pharmaceutical products and raw materials by various testing techniques including but not limited to Wet Chemistry, GC, HPLC, UV-Vis, FTIR, and Dissolution etc.
Qualify, calibrate, and maintain chemical laboratory equipment
Read, understand and interpret analytical procedures
Document work clearly and perform test accurately
Peer review data and reports
General laboratory maintenance
Other duties as assigned

Required Skills:

Minimum 2-3 year of experience in USP method / inhouse method of analysis
Minimum 2-3 years of experience preparing cGMP and other laboratory documents
Minimum 2-3 years of experience with cGMP and FDA regulations
Proficient in chromatography software
Excellent organizational and problem-solving skills
Sound knowledge of laboratory apparatus and equipment and a variety of laboratory techniques and work independently with minimum supervision.

Proficient in Microsoft Word, Excel, and PowerPoint
Experience in HPLC, dissolution handling,
Experience troubleshooting the HPLC and GC
Experience with ICH, DEA, Head Space, and IC regulation knowledge
Proficient in Chromeleon and Chemstation software or other similar 21 CFR compliant software.
USP, BP, EP, and JP methods of analysis

Ensure that all data comply with cGMP, FDA and/or other appropriate regulatory guidelines.

Education and Experience:

Bachelor’s degree in Chemistry with a minimum of three (3) years of laboratory experience, preferably in the pharmaceutical industry; or
Master’s degree in Chemistry with a minimum of three (2) years laboratory experience, preferably in the pharmaceutical industry

Job Number: 2010118989
Job Location: Fenton, MO
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7ASQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Analyst II

Description:
A Configuration Analyst II job in Broomfield, Colorado is currently available through Belcan. This is a contract role with one of Space clients. You will manage the configuration of the company's engineering and manufacturing products through the use of a Product Lifecycle Management (PLM) system. To be considered for this role, you will need to have a Bachelor's degree in Business Administration or related field of study and at least 3 years of relevant experience.

Configuration Analyst II Job duties:
* Coordinate, review and implement engineering design and documentation for the Structures and Electrical groups.
* Coordinate with design engineers and project managers to implement complex engineering designs and provide technical assistance in order to ensure accurate design documentation in a fast-paced environment.
* Define release structure and methods of projects.
* Create releases and review cad drawings, parts and bills of material to ensure adherence to quality standards.
* Manage execution of the release plan and communicate and coordinate project work with other departments.
* Monitor and coordinate the overall timing and flow of releases for projects ensuring that schedules are being met.
* Perform quality and accuracy audits of all activities involving the CM system.
* Provide leadership and direction for release maintenance, re-sequencing strategies and quality implementation.

Qualifications:
* Bachelor's degree in Business Administration or related field of study and at least 3 years of relevant experience
* Experience with PLM and PDM systems
* Experience with Windchill PLM and Cost Point ERP
* Experience using PDM/PLM systems such as Windchill, Enovia 3Dxperience software, and CAD tools such as SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA
* Documentation Control Experience
* Familiar with ISO 9001 requirements
* Change Management Experience
* Strong Problem Solving and Analytical Skills
* Effective Communicator
* Excellent Time Management Skills
* Microsoft Office
* Certification in Configuration Management disciplines (CM II or CM PIC would be desirable)
* The ability to obtain and maintain a Security Clearance may be required

If you are interested in this Configuration Analyst II job in Broomfield, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 306808
Job Location: Broomfield, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/19/2021

Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Crash Analysis Engineer

Description:
804 Technology is currently looking for a Crash Analysis Engineer for a long term contract job opportunity located in Fort Worth TX. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

Salary is based on experience and Per Diem is available to those that qualify.
Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description:
A Crash Analysis Engineer opportunity is available to develop Full Scale Crashworthiness Model for the FARA program. Applicants will have the opportunity to influence full system level design based upon their analytical guidance.
The Crash Analysis Engineer is responsible for creation and modification of a detailed non-linear impact & crash dynamics finite element model for FARA aircraft and perform evaluative simulations to guide design.

Position Responsibilities:
• Import complex 3-D solid models from CATIA V4/5/6 platform.
• Perform necessary geometry clean-up and create adequate finite element mesh using Altair Hypermesh and/or other software, for non-linear high-speed impact simulations.
• Perform nonlinear material characterization (impacting object and impacted surface) to capture pre- & post damage behavior using LS DYNA software.
• Develop full aircraft level non-linear crashworthiness model for various landing and crash impact simulations using LS DYNA software.
• Perform trade studies to optimize the design and communicate with other teams.
• Develop presentations/reports of the analytical results and present to management.
• Assist in aircraft level guidance to influence effective low cost/weight design.
• Assist in the development of certification test plan and requirements.
• Work with the other teams to develop Integrated Vehicle solutions for crash safety.

Education Requirements:
• Bachelor of Science or Engineering Degree is required with major preferably in Mechanical Engineering or Aerospace Engineering.
• Masters or Doctorate degree in Aerospace or Mechanical Engineering is preferred.

Position Requirements:
• Different levels of experience will be considered with at least 10+ years of experience in crashworthy design and analysis is preferred.
• Experience with full aircraft/vehicle level system model development, testing and model validation is preferred.
• 8+ years of experience with CATIA (V 4/5/6), Hypermesh and LS DYNA software is preferred.
• Experience with related software tools such as MSC NASTRAN, MSC PATRAN, MSC ADAMS and ANSYS is preferred.
• Experience in system level structure-to-structure interaction as well as fluid-structure interaction is preferred.
• Analysis skills to accomplish complete aircraft level crash analysis
• Experience with non-linear material calibration and correlation to tests.
• Familiarity with military and industry standards for component level qualification, system level requirements and design, is preferred.
• Experience with the creation of system safety assessments is preferred
• Experience with rotorcraft crashworthiness is preferred
• Ability to communicate efficiently and effectively to coordinate, prioritize tasks, and report status
• Ability to build and maintain effective relationships with customers, as well as horizontal integrations across the other teams
• Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook
• Ability to work effectively within a team utilizing good interpersonal and organization skills
• Ability to obtain Secret Security Clearance preferred

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Job Number: Crash/Analyst 804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021

Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Crash Analysis Engineers

Description:
A Crash Analysis Engineer opportunity is available to develop Full Scale Crashworthiness Model for the Bell FARA program. Applicants will have the opportunity to influence full system level design based upon their analytical guidance.
The Crash Analysis Engineer is responsible for creation and modification of a detailed non-linear impact & crash dynamics finite element model for FARA aircraft and perform evaluative simulations to guide design.

Position Responsibilities:

• Import complex 3-D solid models from CATIA V4/5/6 platform.
• Perform necessary geometry clean-up and create adequate finite element mesh using Altair Hypermesh and/or other software, for non-linear high-speed impact simulations.
• Perform nonlinear material characterization (impacting object and impacted surface) to capture pre- & post damage behavior using LS DYNA software.
• Develop full aircraft level non-linear crashworthiness model for various landing and crash impact simulations using LS DYNA software.

Email resume to: mmccarthy@pdstech.com

Job Number: Bell-Tex Crash
Job Location: Ft. Worth, TX
Rate: $65.00-$95.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 01/07/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Threat Assessment Engineer

Description:
Cyber Threat Assessment Engineer

Job ID # 2021-12280

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 10 Years

What You’ll Do:

Apply computer science, engineering, and mathematical analysis concepts and principles and utilize cyber tools in the assessment of cybersecurity threats and vulnerabilities of embedded software, firmware, and hardware
Work closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system
Participate in all phases of the cyber software development life cycle, including requirements analysis, design, implementation, integration, and formal test
Develop and maintain cyber and software tools, scripts and eXtensible Markup Language (XML) files to implement and/or verify proper configurations
Perform cyber software engineering and assessment duties to ensure the software applications are maintained in accordance with all accreditation and configuration control requirements
Conduct cyber risk assessments and conduct risk management framework analysis in order to identify and mitigate potential cybersecurity vulnerabilities
Participate in peer reviews, identify, track and assess solutions to defects
Participate in design and integration troubleshooting/Root Cause Corrective Action (RCCA) and problem report/test incident resolution for production, development, test, or modification projects
Evaluate new Cyber and C4ISR technologies for potential use on GDLS products
Manage, develop, support and conduct trade studies/structured decisions for Cyber test design, environment, and tools, including system-level impacts to include balance of capability, cost, reliability, schedule improvement, and performance across a Cyber, C4ISR vehicle suite
Develop and evaluate checkpoint and design milestone artifacts and Contract Data Requirements List (CDRLs) and review to ensure technical accuracy and compliance with contract requirements
What You’ll Need:

Strong background in high level programming language such as C, C++ , C#, Java, or Ada, particularly in the area of embedded software
Minimum of 10 years related engineering experience preferred
Experience with operating system internals of Linux or VxWorks
Experience with reverse engineering and analysis of software, and experience with cybersecurity tools (i.e. Metasploit, Nessus, Nmap, Fortify, ACAS)
Low-level programming of device drivers in a Linux or VxWorks environment
Experience across the various life cycle phases including software systems architecture development, requirements definition and analysis, OO development, code and unit test, system integration and test
Good ability to grasp and apply new information quickly
Good ability to handle ever increasing responsibility and assignments with growing complexity
Shows initiative on assignments, and professionally executes projects with little direction
Good ability to be a team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments
Working knowledge of software tools supporting Integrated Development Environments (IDE), version control, defect reporting and scripting
Red Hat enterprise Linux Intermediate experience. Familiarity with SELinux is a plus
Experience in interpreting higher level customer requirements and flowing them down to technology areas
Familiarity with various electrical line replaceable units and the development and troubleshooting on electronic hardware
Experience with embedded systems, automotive and military related
Experience with software and computer science principles
Familiarity with Microsoft Office software (Word, Excel, PowerPoint, Visio, Project)
Currently possess or has the ability to rapidly obtain a DoD Secret clearance or higher
US citizenship required
The flexibility to work non-duty hours or on weekends as needed by the project
Must satisfy Anthropometric Size Restrictions for access to military vehicles and be able to climb on vehicles and pass through hatches

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in a STEM(Science, Technology, Engineering or Mathematics) discipline preferably in the area of Cybersecurity, Computer Engineering, Computer Science, or Electrical Engineering from an ABET accredited university. ( Relevant cyber technical certificates will be considered)

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12280
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/06/2021

DOD - Technician - Test - Level 3

Description:
PDS Tech, Inc. is seeking a Test Technician in Clearwater, FL
Weekend Shift (3-12's) Day & Night Shift Options

Summary:

Performs standard testing processes on a variety of equipment and records and analyzes results.
Requires knowledge of industry specific tests and testing equipment.
May recommend changes in testing methods or equipment changes.
Familiar with standard concepts, practices, and procedures within a particular field.
Relies on experience and judgment to plan and accomplish goals.
Conduct performance and diagnostic testing with automated and manual test operated equipment.
Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments.
Handle and process customer material, test records, and associated documentation.
Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements.
Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying policies and procedures.
Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use.
Utilize product & process knowledge to conduct high level troubleshooting.
Support the flexible workforce initiative training and working across multiple test cells and products.
Coach, mentor, and train Interact with other Test Team members.
Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity.
Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
Comply with detailed instructions on all work applying policies and procedures
Utilize tools, computers, and office equipment as required to complete job related tasks.

Prerequisites:

Minimum HS; preferred Associate, Technical, or military equivalent.
Must be a US Citizen only.
Must have an active Secret Clearance.
2+ years of experience in the field or in a related area.

Job Number: 2010118260
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P4r0QAC&URLSource=cjhunter

DOD - Technician - Test - Level 3

Description:
PDS Tech, Inc. is seeking a Test Technician in Clearwater, FL
1st, 2nd & 3rd Shift available

Summary:

Performs standard testing processes on a variety of equipment and records and analyzes results.
Requires knowledge of industry specific tests and testing equipment.
May recommend changes in testing methods or equipment changes.
Familiar with standard concepts, practices, and procedures within a particular field.
Relies on experience and judgment to plan and accomplish goals.
Conduct performance and diagnostic testing with automated and manual test operated equipment.
Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments.
Handle and process customer material, test records, and associated documentation.
Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements.
Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying policies and procedures.
Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use.
Utilize product & process knowledge to conduct high level troubleshooting.
Support the flexible workforce initiative training and working across multiple test cells and products.
Coach, mentor, and train Interact with other Test Team members.
Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity.
Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
Comply with detailed instructions on all work applying policies and procedures
Utilize tools, computers, and office equipment as required to complete job related tasks.

Prerequisites:

Minimum HS; preferred Associate, Technical, or military equivalent.
Must be a US Citizen only.
Must have an active Secret Clearance.
2+ years of experience in the field or in a related area.

Job Number: 2010118258
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will take customer requirements for an aerospace fluid control component and create a viable design solution that can be carried through all phases such as design, development, testing and manufacturing. To be considered for this role, you will have a B.S. Degree in Mechanical or Industrial Engineering along with a minimum of five years of experience designing fluid control components like Valves, Regulators and Pressure Vessels.

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Design Engineer Job Responsibilities:
* Complete new projects from creation of proposals through development, qualification, and production support
* Determine feasibility of designs considering costs, time limitations, and technical factors
* Apply engineering principles to design, develop, or modify new or existing products
* Conduct analytical studies on engineering proposals to develop design for products
* Analyze test data and reports to determine if design meets functional and performance specifications
* Prepare or directs preparations of component layouts and detailed drawings
* Plans and develops experimental test programs
* Prevent or eliminate defects in new or existing products

Design Engineer Job Requirements:
* B.S. in Mechanical or Industrial Engineering or the technical equivalent
* Minimum of five years of hands-on experience designing fluid control components like Valves, Regulators and Pressure Vessels for the aerospace industry
* Experience with AutoCAD and SolidWorks software is a must
* Project engineering and communication skills
* Ability to perform in a fast paced, 'hands-on' environment
* An Advanced Degree is preferred
* Hands-on experience with software like ANSYS, MathCAD, Solid Works, Pro-E or equivalent is desired
* Understanding or Six Sigma/Lean Manufacturing techniques and methods is desired

If you are interested in this Design Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 303447
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/13/2021

Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 5 located in El Segundo, CA.

RESPONSIBILITIES:
Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test. Development of module, board and slice-level requirements derived from higher-level unit requirements. Development and maintenance of performance budgets and analyses that flow into worst case unit analyses. Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists. Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

REQUIRED EXPERIENCE:
Technical skills required are related to RF, Digital and Avionics Communications Subsystems Engineering with the following activities supported in terms of responsibility, authority and accountability:
� Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists.
� Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test.
� Development of module, board and slice-level requirements derived from higher-level unit requirements.
� Development and maintenance of performance budgets and analyses that flow into worst case unit analyses
� Supplier management activities at various supplier sites
� Requirements and verification support for Avionics units

Leads work with customers to develop and document complex electronic and electrical system requirements.
�Oversees the design and build of multiple satellite and avionics units.
�Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
�Leads work to test and validate to ensure system designs meet operational and functional requirements.
�Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
�Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
�Researches technology advances for potential application to company business needs.
�Makes recommendations for technology investments.
�Experience with digital circuit design.
�Knowledge of FPGAs/ASICs

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

TRAVEL: YES - 10% travel

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 188537
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/02/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 5 -

Description:
PDS Tech, Inc. is seeking a Design and Analysis Engineer, in El Segundo, CA

Summary:

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Technical skills required are related to RF, Digital and Avionics Communications Subsystems Engineering with the following activities supported in terms of responsibility, authority and accountability:
• Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists.
• Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test.
• Development of module, board and slice-level requirements derived from higher-level unit requirements.
• Development and maintenance of performance budgets and analyses that flow into worst case unit analyses
• Supplier management activities at various supplier sites
• Requirements and verification support for Avionics units
Leads work with customers to develop and document complex electronic and electrical system requirements.
•Oversees the design and build of multiple satellite and avionics units.
•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
•Leads work to test and validate to ensure system designs meet operational and functional requirements.
•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
•Researches technology advances for potential application to company business needs.
•Makes recommendations for technology investments.
•Experience with digital circuit design.
•Knowledge of FPGAs/ASICs

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry

Job Number: 2010122559
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 12/11/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PIRqQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECU Circuit and Systems Engineer

Description:
This position is responsible for Engine Control Unit (ECU) Circuit and Systems design for a new aircraft turbine propulsion system. The successful candidate will have systems engineering and electrical circuit design experience and understand how to flow system requirements to the hardware and software engineering teams.

REQUIRED SKILLS:

* Bachelor’s degree in Electrical Engineering
* 5+ years Aerospace circuit design experience
* Electro-mechanical systems requirements development experience
* Systems requirements flow down & management experience
* Understanding of electro-mechanical design process
* Proficient in interpreting and analyzing electro-mechanical engineering drawings
* Understanding of DO-160 and its application in the qualification of complex systems hardware
* DOORS proficiency
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:

* Engine ECU and LRU familiarity
* Electro-mechanical circuit testing experience
* Electro-mechanical system integration experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:

Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 6 mo +
Start Date: ASAP
Input Date: 01/05/2021

Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECU Systems Engineer

Description:
This position is responsible for Engine Control Unit (ECU) Systems design for a new aircraft turbine propulsion system. The successful candidate will have systems engineering experience and understand how to flow system requirements to the hardware and software engineering teams.

REQUIRED SKILLS:

* Bachelor’s degree in Electrical/Mechanical/Aerospace Engineering
* 5+ years Aerospace systems engineering experience
* Electro-mechanical systems requirements development experience
* Systems requirements flow down & management experience
* Understanding of electro-mechanical design process
* Proficient in interpreting and analyzing electro-mechanical engineering drawings
* Understanding of DO-160 and its application in the qualification of complex systems hardware
* DOORS proficiency
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:

* Engine ECU and LRU familiarity
* Electro-mechanical circuit testing experience
* Electro-mechanical system integration experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:

Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 6 mo +
Start Date: ASAP
Input Date: 01/05/2021

Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Job ID # 2021-12286

Contract Opportunity

Location: Vandenberg AFB, CA

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 2 years

What You’ll Do:

Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
Disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
Develop and coordinate technical portions of proposals, statements of work and contract specifications.
Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance.
Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
Must understand and comply with (EWR 127-1) Range Safety design and operational requirements in performance of duties
Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing
What You’ll Need:

Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high pressure gases.
Some travel to other client facilities may be required
May need to work on other shifts when needed.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s degree is required combined with 2+ years of relevant work experience; or Master’s degree in electrical engineering.
Electrical Engineering degree is preferred, will consider Mechanical or Aerospace Engineering Degree.
What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12286
Job Location: Vanderburg AFB, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/11/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Electromechanical Lead) Rochester, NY

Description:
Electrical Engineer, JR-019454
(Electromechanical Lead), NY

Role and Responsibilities:

• Obsolescence management for electronics and mechanical components
• Lead the design of complex electronic mechanical system including defining the architecture, schematics development through to manufacturing establishment.
• Systems approach to problem definition, scoping and solving
• Implementing hardware changes, proactive handling of EOL components.
• Root-causing of failures for market returns, participating in problem solving process.
• Hardware testing and troubleshooting, including board bring-up, design of test tooling and adaptation of existing platforms to new specifications.
Experience:
• Experience in design, development, prototyping, testing and transfer to production of complex Electronics/Mechanical systems
• Manage obsolescence for off-the-shelf (OTS) components to include: motors, pumps, actuators, solenoids, hard drives, sensors, heaters, monitors and printers
• Experience in systems integration including hardware and software
• Experience using mechanical design software.
• Experience in Circuit design and ECAD tools Eg. Altium Designer
• Demonstrated ability to deliver products in a regulated environment and the phase gate process
• In Vitro Diagnostics (IVD) industry device development highly preferred
• Familiarity with international standards e.g. ISO 9001, ISO 13485, IEC 61010, IEC 60601, and FDA QSR regulations

Required Skills:
Pro-active update the design of electronic sub-assemblies to resolve obsolescence
Identify relevant requirements from medical device standards and In depth knowledge of regulatory procedures that affect methods and techniques to solve issues when creating designs.
Strong knowledge of fundamentals regarding electronic components and circuits
Systems integration including Electronics and Mechanical hardware
Proficiency with electrical test equipment; oscilloscopes, logic analyzers, etc.
Excellent understanding of mechanical, thermal, electrical, and optical designs and components, and their interactions as a system to meet system performance requirements
Proficiency in analog and digital circuit design including signal processing, a/d, d/a, power circuits
Experience with mechanical design software.
Familiarity with international standards e.g. ISO 9001, ISO 13485, IEC 61010, IEC 60601-1 and IEC 60601-1-2 and FDA QSR regulations
Adherence to OH&S requirements: Safe use of potentially hazardous equipment, liquids etc.

Job Number: JR-019454
Job Location: Rochester, NY
Input Date: 01/27/2021

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Electrical Hardware Engineer

Description:

We are looking to add an Electrical Hardware Engineer to our team who has "cradle to grave" experience with full-lifecycle complex electronic hardware design. This position will have made more than just incremental updates to a design and have experience going from initial requirements captured, through the schematic capture, PCB layout, DFM/DFT and product V&V and release process.
Ideal candidates will have backgrounds at newer EV companies or come from high-volume automotive and consumer electronics backgrounds. Aerospace background is not required as long as candidates exhibit a basic understanding of the unique elements involved in designing avionics for hostile environments.

Key Requirements:

Knowledge of PCB layout software (KiCad preferred, Altium is fine if you are willing to learn KiCad)
Understanding of aero/MIL standards relating to PCB/PWB design (IPC-2221, MIL-PRF-31032, NASA-EE-INST-002, AEC-Q100/101/200)
Detailed understanding of analog/mixed-signal fundamentals
Experience designing 500+ Watt to multi-Kilowatt DC/DC converters (buck-boost, SEPIC, split-pi topology or similar)
Experience working with motor control and/or power electronics (gate drivers for IGBT/MOSFET)
Experience designing mid to high-speed digital hardware (Microcontrollers, CPLD, DSP, System-On-Chip designs)
Fundamental understanding of EMI and grounding

Job Number: 2010119173
Job Location: Mojave, CA
Duration: 36 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7pvQAC&URLSource=cjhunter

Electrical Test Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Test Engineer, in Windsor Locks, CT.

Summary:

Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
This can involve testing, data analysis, and interface with all aspects of the engineering department.
Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
Typical Duties: Support laboratory testing of Space hardware,
Develop and validate tooling concepts,
Author and maintain operation/test procedures,
Preparation of standardized operation/test sheets,
Defining test rig and facility requirements,
Participation on program Integrated Product Development teams,
Review drawings and concepts, and resolve testability concerns.

Prerequisites:

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should include working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
Capability of working independently and is self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.

Bachelors

Job Number: 2010115312
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou6qQAC&URLSource=cjhunter

Embedded Software Developer

Description:
Chipton-Ross is seeking a Embedded Software Developer located in El Segundo, CA

RESPONSIBILITIES:
�Develop, integrate, and test of embedded flight software on a rapid development satellite program.
�Contribute to the full software life cycle.
�Partner with systems engineering and test to write software that meets program needs.
�Coding the engineers duties (which will include helping develop the software team to derive software requirements, evaluate software reuse, and define software architecture).
�Facilitate translation of detailed requirements and algorithms into flight software by closely working with subject matter experts and the software team.
�Define software-in-the-loop environments as well as a hardware-in-the-loop integration and test environments.

REQUIRED EXPERIENCE:
�Experience with a range of computer programming languages; must be fluent in C/C++
�Experience developing on a Linux operating system

ADDITIONAL EXPERIENCE:
� Experience (highly desired) with agile development processes and methods
� Experience in development, build and test of small and medium-sized spacecraft
� Experience in a dynamic rapid prototyping environment
� Prior history working proprietary programs with a variety of Government entities in a classified environment
� Experience developing middleware software
� TS/SSBI highly desired
� Experience with Real Time Operating Systems, such as Integrity, Real-Time Linux or vxWorks
� Knowledge of low-level programming with real-time constraints (example APIs include Unity and the Unreal Engine)
�Knowledge of computer hardware architectures and the extent to which they influence low-level software

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience).

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

TRAVEL: YES
Frequent travel to Kent, WA may be required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 187759
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Embedded Software Engineer

Description:
PDS is seeking an Embedded Software Engineer for an open position in Ft. Worth, TX

The 429 Embedded Software Engineer will be responsible for (but not limited to) the following:

Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
Develop and update requirements and verification traceability
Conduct software integration and testing on target hardware
Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:

Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:

Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
Experience with DO-178 Level A software or other embedded software development and testing is required.
Experience with Flight Controls Computer Software.
Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
Experience with Primary Development Environment:
- MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
- C/C++ code
- C# test scripts
- Serena Dimensions / PVCS
- Git
- Embedded Software Development environments

Job Number: 2010119389
Job Location: Fort Worth, TX
Per Diem: No
Duration: 12 months
Input Date: 11/18/2020
Last Updated: 03/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
804 Technology is currently looking for an Embedded Software Engineer for a long term contract job opportunity located in Fort Worth TX. The Embedded Software Engineer will be responsible for (but not limited to) the following:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration
My contact information is listed below. If you are interested please respond be sending me your resume and your availability. Salary is based on experience and Per Diem is available to those that qualify. Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com

Embedded S/W Engineer – 429 Program:
The 429 Embedded Software Engineer works in Ft. Worth, TX and will be responsible for (but not limited to) the following:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:
• Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
• Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:
• Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with Primary Development Environment:
• MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
• C/C++ code
• C# test scripts
• Serena Dimensions / PVCS
• Git
• Embedded Software Development environments

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Job Number: Software Eng804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021

Engineer I

Description:

Job description

Engineer I – Mission Systems Engineer (Systems Operability)

What You’ll Do

Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems.
Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations.
Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
Maintain a regular and predictable work schedule.
Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
Perform other duties as necessary.

What You’ll Need

BS degree or higher in Engineering or a related technical field is required plus 2 or more years related experience.
Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
Current TS/SCI security clearance required.
Experience working in UNIX, Mac, and MS-Windows environments is preferred.
Good planning, organization, and communication skills.
Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
Good interpersonal and leadership skills.
A willingness and ability to learn many of the technical skills through on-the-job training.
Ability to remain calm and collected in stressful situations.
Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.

Working Conditions

Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
May occasionally work in production work centers where use of protective equipment and gear is required.
May access other facilities in various weather conditions.
Travel and local commute between Ball campuses and other possible non-Ball locations may be required.

Successful candidate will have completed a government national security clearance investigation and must meet eligibility requirements for access to classified information. *U.S. Citizenship is Required. By applying to this position you are agreeing to complete a National Security Clearance Pre-Screen Questionnaire, if one is required, to evaluate your general ability to obtain the required security clearance or government customer access associated with this position.

US CITIZENSHIP REQUIRED

Job description

Engineer I – Mission Systems Engineer (Systems Operability)

What You’ll Do

Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems.
Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations.
Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
Maintain a regular and predictable work schedule.
Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
Perform other duties as necessary.

What You’ll Need

BS degree or higher in Engineering or a related technical field is required plus 2 or more years related experience.
Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
Current TS/SCI security clearance required.
Experience working in UNIX, Mac, and MS-Windows environments is preferred.
Good planning, organization, and communication skills.
Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
Good interpersonal and leadership skills.
A willingness and ability to learn many of the technical skills through on-the-job training.
Ability to remain calm and collected in stressful situations.
Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.

Working Conditions

Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
May occasionally work in production work centers where use of protective equipment and gear is required.
May access other facilities in various weather conditions.
Travel and local commute between Ball campuses and other possible non-Ball locations may be required.

US CITIZENSHIP REQUIRED

Job Number: 2010115065
Job Location: Boulder, CO
Duration: 100 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OtGcQAK&URLSource=cjhunter

Engineer II

Description:

Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems.
Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations.
Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
Maintain a regular and predictable work schedule.
Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
Perform other duties as necessary.

BS degree or higher in Engineering or a related technical field is required plus 5 or more years related experience.
Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
Current TS/SCI security clearance required.
Experience working in UNIX, Mac, and MS-Windows environments is preferred.
Good planning, organization, and communication skills.
Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
Good interpersonal and leadership skills.
A willingness and ability to learn many of the technical skills through on-the-job training.
Ability to remain calm and collected in stressful situations.
Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.

Working Conditions

Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
May occasionally work in production work centers where use of protective equipment and gear is required.
May access other facilities in various weather conditions.
Travel and local commute between Ball campuses and other possible non-Ball locations may be required.

Job Number: 2010114980
Job Location: Boulder, CO
Duration: 48 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full stack Developer - needed, contract

Description:
As a full-stack developer, you will be expected to contribute to all aspects of this platform. You should be comfortable working in and contributing to a microservice architecture that makes use of modern data, cloud and web technologies.

To be successful in this role, you must be fully capable of working autonomously while staying tightly aligned with the team and the teams' goals. You should be a strong, proactive communicator and be willing to share your input and viewpoints regularly. Additionally, you must already have engrained in your habits modern best practices for collaborative software development (clean code, documentation, git, etc.). We need someone who can deliver impactful results when provided a set of requirements and to collaborate with the team and customers to refine the understanding of those requirements as necessary.

Skill/Experience/Education:
Mandatory:
•5+ years of experience as a full-stack developer
•Mastery of Java, JavaScript, SQL
•Demonstrated ability to work effectively in and contribute to a microservice architecture
•Experience with Spring Boot
•Mastery of modern software best practices (clean code, concise documentation, git, etc.)
•Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Desired Skills:
•3+ years of hands-on experience building data systems on a microservice architecture
•3+ years of hands-on experience developing frontends with ReactJS specifically
•Experience building web-based data display and manipulation tools
•Experience with Material UI and material-table
•Experience with AWS, Docker, Kubernetes
•Experience with NoSQL (ElasticSearch, DynamoDB)
•Experience working in a fast paced, high-performance team

Job Number: WA2548
Job Location: WA
Per Diem: offered
Overtime: Possible
Duration: 12 ++ Months plus
Start Date: 2/3 wks from offer
Input Date: 12/18/2020
Last Updated: 02/09/2021

Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer

Job ID # 2021-12296

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

What You’ll Do:

Analyze and design sequence of operations and workflow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.
May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations.
Conduct studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.
May assist facilities engineers in the planning and design of facilities.
Develop labor standards; perform time studies on new or existing processes; support the bidding process with new standards; provide support to manufacturing through monitoring of cost metrics, and through initiatives that result in waste elimination and process improvements.
Perform simulations, capacity planning, and produce savings packages.
Work single piece flow initiatives that reduce the hours per unit of our products.
Must have good communication skills and be able to work effectively in a team environment.
What You’ll Need:

Ability to Obtain Secret Clearance .
Good communication skills
Microsoft Excel experience is required
Desired Skills:
Experienced with Microsoft Office (PowerPoint, Access, Word, and Excel)
Experience with Statistical Analysis
Experience with Simulation software
Strong written and verbal communication skills
Knowledge of Lean manufacturing concepts and techniques
Experience in a Manufacturing environment

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Industrial Engineering.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12296
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/12/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
LRU and Components Engineer - Engine Control System

Description:
This position is responsible for requirements management of line replaceable units (LRUs) and components used on a new aircraft turbine propulsion system. The successful candidate will have systems engineering experience and understand how to develop and flow system requirements to the individual LRU and components suppliers.

REQUIRED SKILLS:

* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* Systems requirements flow down & management experience
* Engine LRU technical proficiency and understanding of the interface between various engine LRU and components
* Understanding of design process
* Understanding of qualification process
* DOORS proficiency
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:

* Supplier Management of Components such as valves, temp/pressure sensors, torque sensors, etc.

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:

Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 6 mo +
Start Date: ASAP
Input Date: 01/21/2021

Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead, Global Trade Licensing

Description:
Primary & Essential Responsibilities:

•Review international license applications to ensure that they meet U.S. Government requirements and are processed in a timely manner
•Provide support to designated companies regarding Trade Compliance requirements in accordance with the U.S. Department of State International Traffic in Arms Regulations (ITAR), with specialized experience with the U.S. Department of Commerce Export
Administration Regulations (EAR)
•Serve as primary point of contact with the U.S. Government in order to submit, manage and resolve any issues related to international trade license applications
•Interface with the U.S. Department of Defense and other USG stakeholders to develop policy guidance to support the Company’s international marketing and sales
•Assist with developing and implementing guidance, procedures, processes and templates to facilitate international license requirements
•Actively participate and support training events (webinars, summits and conferences)
•Performs other duties and responsibilities as required

Position Requirements:

•Bachelor’s degree in relevant field of study or equivalent practical work experience required
•MUST have a strong background in EAR licensing, de Minimis and encryptions regulations
•MUST have a strong background with CCL Category 5 and USML Category XI
•MUST have a strong background in Export Control Reform licensing
•Must meet requirements to act as an Empowered Official in accordance with the ITAR
•Must have or be able to obtain a U.S. Security Clearance of SECRET or higher
•MUST have experience with OCR EASE software
•MUST exhibit a high attention to detail, integrity and discretion
•MUST be able to work well in a team environment
•Ability to manage assignments with limited supervision
•Ability to analyze and suggest solutions to complex problems
•Excellent oral and written communication skills
•Ability to travel up to 10% (when conditions are appropriate)

Preferred Additional Skills:

•Experience working under a Consent Agreement
•Effective interpersonal and communication skills with the ability to interface with personnel at all levels, both verbally and in writing
•Proficiency in Microsoft Office products (Excel, Word, PowerPoint, Outlook) and SharePoint
•Experience writing processes and procedures

Job Number: 19205
Job Location: Arlington, VA
Rate: $60.00
Per Diem: No
Overtime: Yes
Duration: One Year
Start Date: ASAP
Input Date: 01/07/2021
Last Updated: 01/11/2021

Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Linux Systems Administrator

Description:
A Linux Systems Administrator job in Ft. Belvoir, VA is currently available through Belcan. In this role, you will be responsible for overseeing the daily operations and administration of the IT server infrastructure. You will also perform a wide variety of duties which include, but are not limited to, analysis, installation, modification, documentation, maintenance, problem diagnosis, and repair of all server technology hardware and software. To be considered for this role, you will have a Bachelor's degree in a specialized area, plus a minimum of 5 years of relevant experience. A current active Department of Defense TS/SCI security clearance is required at the time of hire.

Linux Systems Administrator Job duties:

* Provides hardware and software technical guidance to core IT administrators and remote sites.
* Red Hat LINUX command level administration.
* Trusted Network Environment (TNE) Pit Bull command level administration.
* Create and resolve helpdesk action items.
* Manage cross domain enterprise level solutions.

Qualifications:

* 8+ Years of LINUX Administrator experience supporting a high user base (1000+ users).
* Red Hat Enterprise Linux 6.x and 7.x. experience is a plus.
* Technically fluent in the design and use of multiple Red Hat Enterprise Virtualization, VMware, vSphere, vCenter, ESXi, Microsoft Hyper-V in a distributed environment.
* Proficiency in one or more scripting languages (bash, Perl, Python).

If you are interested in this Linux Systems Administrator job in Ft. Belvoir, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

Job Number: 307410
Job Location: Fort Belvoir, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/16/2020
Last Updated: 01/20/2021

Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Linux Systems Engineer

Description:
A Linux Systems Engineer job in Chantilly, VA is currently available through Belcan. In this role, you will be responsible for the design, testing, deployment, maintenance, operation, and evolution of the systems directly supporting the insider threat detection program of a large government customer in the United States Intelligence Community (USIC). To be considered for this role, you will have a Bachelor's degree in systems engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience. Agile experience preferred. A TS/SCI security clearance with the ability to obtain a Polygraph is required at time of hire.

Linux Systems Engineer Job Duties:

*Red Hat Enterprise Linux 6/7 experience
*Experience deploying, operating, monitoring, patching, troubleshooting Linux Hosts
*NFS, SAMBA, AD/LDAP integration, Web Servers, Tomcat, LVM, YUM, and Linux security hardening
*Able to install Linux servers, troubleshoot hardware/software installation and basic networking issues
*Basic familiarity with BASH Scripting, kickstart deployments
*Basic familiarity with Red Hat Satellite Server technologies
*Basic familiarity with configuring Storage Area Network connectivity over Fiber Channel

Qualifications:

*Familiarity with Windows systems, VMWare, Hadoop, and Storage Area Networks, Big Data Analytical environments
*Strong verbal and written communication skills
*Ability to work independently with little supervision
*Demonstrated ability to quickly learn, retain, and apply good interpersonal skills, and perform effectively under time pressure

If you are interested in this Linux Systems Engineer job in Chantilly, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

Job Number: 307907
Job Location: Chantilly, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/16/2020
Last Updated: 01/19/2021

Machinist 2

Description:
Chipton-Ross is seeking a Machinist 2 for an opening in Chelmsford, MA.

RESPONSIBILITIES:
Sets up and operates a variety of manual and numerically controlled (NC) precison machine tools to make a variety of components, jigs, mechanisms, and/or tools to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on NC machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
- Ability to setup and operate precision 3-axis CNC machines such as Robodrill and Prototrak type machines.
- Ability to produce and edit G-Code NC programs with CamWorks or similar (CAD/CAM software).
- Ability to make on the fly adjustments as needed at the HMI.
- Familiarity with Fanuc, Fadal, and Prototrak controls.
- Familiarity with GD&T.
- Effective planning, prioritizing, and organizing tasks.
- Ability to follow work instructions or engineering drawings.
- Demonstrable commitment to safety at all times.
- Quality oriented and maintains strict attention to detail.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, 1st Shift
Full-Time

Job Number: 188032
Job Location: Chelmsford, MA
Rate: Up to $32.00 DOE
Duration: 4 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Manufacturing Operator

Description:
PDS Tech is seeking candidates for a Manufacturing Operator position in Carlsbad, CA

Position Summary:

Work in a team-based environment within a manufacturing department responsible for Filling and Assembling reagent kits, used in DNA Sequencing.

Job Responsibilities:

Carry out Standard Operating Procedures involved in high throughput manufacturing, visual inspection, material handling and inventory control.
Operate various automated filling equipment including labeling machines, laboratory instruments and warehouse equipment.
Complete all batch records and manufacturing documents according to quality systems standards as required.
Complete production schedule to plan and maintain sufficient output levels measured on an hourly basis.
Escalate equipment issues to the maintenance team
Require passing of all written competency requirement related to the processes
Semi-routine work situations of limited scope and complexity where ability to recognize deviations from accepted practice is required
Able to work safety with chemicals and hazardous material
Flexible to work varying schedules and hours as needed.
Able to stand for an extended period of time performing repetitive motions.
Will require proficiency in multiple process and equipment within respective manufacturing value stream

Minimum Qualifications:

High School Diploma or Equivalent (required)
Some experience in a manufacturing-based environment

Preferred Qualifications:

Strong verbal and written communication skills
Knowledge of Good Documentation Practices
Experience with ISO 9001, ISO 13485 and/or GMP manufacturing environment
Working knowledge of Microsoft based software such as MS Word and Excel.

Physical Demands and Work Environment:

The physical demands and work environment described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit, stand, walk, talk and hear; use hands to finger, handle or feel; and reach with hands and arms. Close vision and ability to adjust focus required. Regularly required to lift up to 20 pounds. May be required to lift weight of 45 pounds or more, with assistance and/ or with equipment on occasion.

Job Number: 2010121482
Job Location: Carlsbad, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Dru Jackman
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PE1qQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler

Description:
Material Handler

Job ID # 2021-12288

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: High school Diploma / GED

Minimum Experience: 2 years

What You’ll Do:

Help set and meet team goals by analyzing production rates data, reviewing stock records, and preparing purchase orders to determine stock status against production requirements.
Identify material shortages and support problem solving resolution and document and distribute scrap/ salvage parts.
What You’ll Need:

Ability to lift heavy items and potentially operate a forklift
Clear knowledge of the enterprise software and associated data
Clear knowledge of material planning, control and inventory methodology
Ability to handle and process classified material
Clear knowledge of Government / Customer Property Control
Outstanding customer service and communication skills
Computer skills to proficiently handle your routine tasks

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

High school diploma / GED combined with 2+ years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12288
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/11/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer III

Description:
***All remote if access to high speed internet ***

Job Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

Must Haves:
• CNC 5axis composite trim programming aerospace.
• NC Programmer of 5 axis routers to perform trim and drill operations on composite panels for an aircraft.
• Must have experience with 5 axis programming, MasterCam, Vericut, able to interpret GD&T, UG/NX or Catia experience.
• Must be able to use technology effectively to communicate.
• 5+ years of experience programming 5 axis.
• Software skills required are MasterCam, Vericut, Catia or UG/NX
• Experience working at one or more of the following companies would be a plus, Boeing, Spirit, Northrop Grumman, Airbus.

The Structures Company is an AA/EOE.

Job Number: 440
Job Location: WV
Rate: $40-$45/Hr. **DOE**
Duration: 6 Month Contract
Start Date: 1/11/21
Input Date: 01/05/2021
Last Updated: 01/16/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Network Security Specialist - Top Secret

Description:
PDS Tech, Inc. is seeking a STE Cyber Security Network Specialist for the BT&E Space Systems Test organization in El Segundo, CA.

Responsibilities
Responsible for the hardening, deployment, setup, and readiness of network for Special Test Equipment in factory and launch environments.

Position Responsibilities

Scan for vulnerabilities, implement mitigations, install, administer, and troubleshoot on the following operating systems:
Microsoft Windows XP, Microsoft Windows 7, Microsoft Windows 10,
Microsoft Server software from the same eras of Windows above
Multiple Linux distros
Oracle Solaris (UNIX)Desired familiarity with a variety of services and protocols including:
NFS and CIFS network data, SAMBA
NIS, DNS, NTP, SMTP, SNMP, SSH, SFTP, VPN’s
Active Directory, LDAP, Firewalls
RAID storage
Backup methodologies, disaster recovery
HTTP/HTTPS (typically Apache and IIS)
High level DBA skills (install, start, stop, etc): SQL Server and MySQL
Basic familiarity with HP/Agilent, etc. instruments and the ability to set up communications (Ethernet and GPIB)Programming skills:
UNIX/Linux shell scripts (C, Bourne, BASH)
Python script language

This position requires

An active Top Secret (TS/SCI) US Security Clearance and a current Single Scope Background Investigation (SSBI).

(A U.S. Security Clearance that has been active in the past 24 months is considered active.)

Single Scope Background Investigation and 8570 Level II Certification (e.g. CompTIA Security+, CompTIA CySA+, etc.)

Education / Experience

Bachelor's Degree or higher from an accredited course of study in engineering, computer science, mathematics, physics or chemistry.
Education/experience typically acquired through advanced technical education and typically 9 or more years' related work experience or an equivalent combination of technical education and experience.

Job Number: 2010117586
Job Location: El Segundo, CA
Duration: 5 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Nicole Emfinger
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P2jGQAS&URLSource=cjhunter

Network Security Specialist 4

Description:
Chipton-Ross is seeking a Network Security Specialist 4 for an opening in El Segundo, CA.

RESPONSIBILITIES:
Seeking a STE Cyber Security Network Specialist for the BT&E Space Systems Test organization. Responsible for the hardening, deployment, setup, and readiness of network for Special Test Equipment in factory and launch environments. Scan for vulnerabilities, implement mitigations, install, administer, and troubleshoot on the following operating systems:
�Microsoft Windows XP, Microsoft Windows 7, Microsoft Windows 10,
�Microsoft Server software from the same eras of Windows above
�Multiple Linux distros
�Oracle Solaris (UNIX)Desired familiarity with a variety of services and protocols including:
�NFS and CIFS network data, SAMBA
�NIS, DNS, NTP, SMTP, SNMP, SSH, SFTP, VPN�s
�Active Directory, LDAP, Firewalls
�RAID storage
�Backup methodologies, disaster recovery
�HTTP/HTTPS (typically Apache and IIS)
�High level DBA skills (install, start, stop, etc): SQL Server and MySQL
�Basic familiarity with HP/Agilent, etc. instruments and the ability to set up communications (Ethernet and GPIB)Programming skills:
�UNIX/Linux shell scripts (C, Bourne, BASH)
�Python script language

EDUCATION:
Accredited education/experience typically acquired through advanced technical education and typically 9 or more years' related work experience or an equivalent combination of technical education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 5:00 PM

ADDITIONAL REQUIREMENTS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 186988
Job Location: El Segundo, CA
Rate: $DOE
Duration: 5 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Powertrain Controls Engineer

Description:
The Powertrain Controls Engineer – Intermediate is responsible for new feature development, and enhancements to existing algorithms. The Powertrain Controls Engineer - Intermediate will work closely with a cross functional team, utilizing various tools (vehicle, HIL, Dyno, Virtual, rapid prototyping) through the V-model development process to ensure quality and robustness of the production algorithms.

Responsibilities include but are not limited to:
•            Interface with systems and calibration to fully understand the requirements
•            Develop implementation strategies
•            Assess and document the impacts against regulatory requirement
•            Markup models to ensure the design meets functional/operational requirements
•            Validate the design during the production process
•            Ensure project is on track by developing plans, track progress, and present technical report to management and project chiefs.
•            Participate in the decision making process on controls strategy design to achieve functional objectives

Requirements:
• BS degree Electrical Engineering is required from an accredited University
• 3-5 years of engineering work experience preferred.
• Should be knowledgeable in MATLAB/Simulink.
• Should be knowledgeable in Powertrain systems - specifically, computer based tools and process based development, emissions control systems development, and calibration refinement.
• Embedded software experience desirable. Electronic module/system experience desirable. Outstanding interpersonal and problem solving skills. Quick study who is passionate about his/her work and willing to go above and beyond.
• Self-starter who is able to work cross-functionally with other people

Driving and Travel Requirements:
Will be required to drive a company car. A valid driver’s license is required as well as a clean driving record.
Will be required to travel domestically and internationally up to 20%

Job Number: 2010122458
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 12/09/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PHkwQAG&URLSource=cjhunter

Principal Software Engineer

Description:
A Principal Software Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for further advancing the cutting-edge technology that supports some of our nation's core defense/intelligence services and systems. To be considered for this role, Bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience; agile experience preferred.

Principal Software Engineer Job duties:

* Perform software requirements analysis, participate in research, design, develop and test software and tools, to include development of new work products or enhancing existing applications
* Apply the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of technical engineering products
* Provide leadership to cross functional software development teams and lead small technical proposals and contributes to medium sized proposals
* Perform technical planning, verification and validation of others work, cost and risk analysis, and supportability and effectiveness analyses for total systems
* Participate in internal reviews of software components and systems

Qualifications:

* Proficient in one of the following: Java, C++, C, or JavaScript (using object oriented techniques) and web Services knowledge such as HTML, CSS, JavaScript, React, and Redux
* Strong leadership skills suitable for recruiting, leading and managing teams of engineers to solve challenging problems
* Strong fundamentals in data structures and algorithms along with solid object oriented programming and software design skills
* Deep exposure to Unix/Linux systems as well as Windows

If you are interested in this Principal Software Engineer job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

Job Number: 307917
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2020
Last Updated: 03/05/2021

Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
City, State: West Region
Email: dhart@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=307917&job_number=307917

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Rep

Description:
Procurement Rep

Job ID # 2021-12300

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 4 Years

What You’ll Do:

Source, negotiate and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization.
Compile and analyzes statistical data to determine feasibility of buying products and to establish price objectives.
Monitor performance of suppliers.
Compile information to keep informed on price trends and manufacturing processes.
Evaluate areas of opportunity to leverage material acquisitions.
Track data to keep informed on price trends and manufacturing processes.
Negotiate with suppliers and analyzes suppliers' operations to determine factors that affect prices and to determine lowest cost consistent with quality, reliability, and ability to meet required schedules.
Review proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records.
May prepare request for proposals (RFP) and bid packages.
What You’ll Need:

Must have experience with FAR, DFAR, SAP
Software Skills:
SAP

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree combined with 4 + years of relevant work experience; or Master’s Degree combined with 2 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12300
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/13/2021

Product Acceptance Specialist B

Description:
Chipton-Ross is seeking a Product Acceptance Specialist B for an opening in North Charleston, SC.

RESPONSIBILITIES:
Performs, collects and verifies data to support the identification of root cause routine problems. Supports quality source selection and process reviews of suppliers' ability to meet program quality requirements. Assists with hardware, software and system level audits to determine compliance with quality management system standards, configuration assurance, related business, regulatory and customer requirements. Documents audit results in standard formats. Verifies routine product conformance to design requirements. Provides objective evidence of results. Performs auditing, surveillance and monitoring. Identifies and documents discrepancies. Segregates and controls non-conforming items. Performs preliminary review and disposition of non-conformance. Conducts product review with customer during product or process verification. Identifies repetitive or significant non-conformances and initiates requests for corrective action.

REQUIRED EXPERIENCE:
Suitable candidates for these structures contract positions will have ONE year of direct Aerospace Structural Experience as a minimum requirement, and preferably have THREE years of solid Aerospace Structural Experience. CANDIDATES WITHOUT AEROSPACE STRUCTURAL EXPERIENCE will NOT be considered.

ADDITIONAL REQUIREMENTS:
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.
Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Enabling technology/Innovation & Invention
Provide a means to generate giant leaps in performance and capabilities of the user using equipment and methodology. Possess knowledge of hardware and software components which, when properly integrated, enable a specific process to be realized. Understand that all technology enables something. Generates innovative solutions in work situations; tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Systems Thinking
Understands the big picture and the inter-relationships of all positions and activities in the organization, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans and anticipate future events.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the team�s energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

Technical Competencies
Analysis and Corrective Action
Knowledge of root cause analysis and corrective action of non-conformances to reduce scrap, minimize rework, reduce cost and improve quality to meet all requirements. Knowledge of the process for producing product definition data including emergent design changes.

Assembly Process
Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Exp Hardware Inspect & Valid
Knowledge of precision measurement tools and techniques for the inspection and validation of mechanical test hardware components and assemblies (e.g. conventional gages and measurment tools, CMM, laser tracker, theodalites). Familiarity with associated validation software for comparative analysis. Ability to document and report on results, and address descrepencies.

Non-Destructive Eval Processes
Knowledge of non-destructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, penetrant inspection).

Quality Systems Process
Knowledge of quality systems (e.g., inspection process, Boeing quality procedures).

Repair Processes and Concepts
Knowledge of repair concepts including repair station processes, component repair concepts, procedures, and warranty processes and contractual agreements.

Test Data Analysis
Ability to identify the required test parameters, analyze test data to support of real time testing and post test requirements. Validation of test data calculations required.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent . High combination of education and experience (e.g. vocational school/Associate). High School Diploma o GED required

FULL TIME/VARIABLE SHIFT
Must be able to work variable shifts - 1st, 2nd 3rd

Job Number: 188617
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 12/17/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Production Support Technician

Description:
Duties:
• Download, configure and test all units according to set procedures. Inspect for cosmetic failures.
• Fully erase any old program stored in unit as needed.
• Download appropriate test program into unit and fully test functionality of unit as needed.
• (Solder Tech Only) Using documented procedures, repair printed circuit boards or subassemblies by removing and installing electronic and/or mechanical components in the correct orientation and location. Use a soldering iron to perform hand soldering/de-soldering of through-hole and surface mount components; reinstalling electronic components into subassemblies with correct orientation and location.
• Using documented procedures, repair electronic equipment by replacing electronic or mechanical components within in the correct orientation and location (no Soldering necessary)
• Assemble, clean and test units.
• Record all units into repair tracking system.
• Report any informational discrepancies between the unit and its associated paperwork.
• Work within quality control standards; maintain a neat, clean and orderly workstation adhering to all safety standards.
• Assist with special projects as needed.

Candidate Requirements:
• High School diploma or equivalent
• 1 year work experience in a production environment or equivalent technical education
• Basic computer skills (data entry, basic PC navigation skills)
• Ability to communicate effectively
• Ability to read and understand Customer Specific Requirements
• Ability to work in a team environment

Job Requirements:
• Good working knowledge of ESD and workmanship requirements
• Electronics or computer/tablet repair/assembly experience
• Strong computer software and hardware skill
• Expected to read and comprehend process documentation including Bills of Materials and Assembly
drawings
• Expected to communicate well in English both verbally and in written format
• Component Identification Ability required
• Candidates should be very organized with the ability to keep count of parts
• Candidates should have the ability to carry out detailed written or oral instructions
• Assist in other duties required as business needs

Preferred Qualifications:
• Formal Soldering Training or equivalent military training
• Experience soldering / desoldering surface mount and through-hole components
• Electronic component identification
• Ability to read and interpret DMM's
• Computer certification

Job Number: 2110123375
Job Location: Marietta, GA
Duration: 12 months
Input Date: 01/11/2021
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PNWCQA4&URLSource=cjhunter

Project Manager

Description:
PDS Tech, Inc. is seeking a Project Manager in Auburn Hills, MI.

Responsibilities:

Product development process and ensure processes are followed and all product documents and data are completed and stored.
Review and manage project scope, goals, resources, and deliverables.
Track and report project costs, milestones, and other key project metrics.
Prepare team for internal and external design reviews to minimize technical and commercial risks.
Execute change management; document scope requirements and associated risks, track and revise project timeline, forecast project cost and communicate through the appropriate channels.
Provide regular status updates and be the contact person/interface to all involved departments & parties.
Drive engineering and operations teams to keep projects on time and on target.
Manages projects in all aspects of New Product Introduction processes from project initiation through successful transfer into production in manufacturing locations worldwide.
Suppliers lead.
Customer satisfaction oriented.

Qualifications/Education:

Minimum five years’ experience as a project manager managing multiple projects in engineering and production environment.
Knowledgeable of E/E and/or software engineering, design and analysis. Previous E/E and/or software engineering design and analysis experience is a bonus. Prefer experience working with integrated display units.
Bachelor’s degree or equivalent required; degree in technical field preferred.
Must be able to read, write, and speak English fluently.
Proficient in Microsoft Office Suite including MS Project.
Experience with Catia v5 is helpful.
Self-motivated with ability to function in a high energy, fast paced team environment with minimal direction.
Experience collaborating across multifunctional teams.
Must have excellent planning and organizational skills.
Able to build up new customers relationship and trust, to develop and consolidate long terms cooperation.

Job Number: 1910101837
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033g9xQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Test Engineer

Description:
Inconen is looking for a Project Test Engineer for our client, a well-known Aerospace Company, in Windsor Locks, CT.

Job Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Candidate should have experience with project management. In this role the candidate will work with outside test facilities to arrange testing. This will include writing of supplier test paperwork, interfacing with outside test facilities to arrange scheduling and arranging the packaging and shipment of the test item and support equipment to the outside facility. Prior experience with project engineering is preferred.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Education:
Bachelor’s Degree
5+ years of related experience

Job Number: 12684
Job Location: Windsor Locks, CT
Rate: $50.00 - 67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 01/13/2021

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Propulsion Controls Engineer

Description:
Responsibilities:
• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:
• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:
• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:
• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

To be considered and complete submittal to client, please e-mail me the following:

1 Why are you looking for work?
2 Include an up to date resume
3 W-2 Hourly Rate request (Any benefit cost should be factored)
4 Day and month of birth for submittal (signature code for system).
5 Four Digits (unique identifier)
6 Your Availability upon offer

Job Number: BTX8912
Job Location: FT Worth, TX
Rate: 55-70hr.
Per Diem: offered
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 01/05/2021
Last Updated: 03/05/2021

Propulsion System OBD Control Engineer

Description:
The Propulsion System OBD Control Engineer is responsible for providing strategic and technical leadership in the area of propulsion system OBD control solutions. We are looking for top talent to grow OBD control development on next generation propulsion technologies. The candidate will join an agile & fast paced team of propulsion control engineers developing core control strategies, OBD strategies, and system requirements. Responsibilities include but not limited to:
• Leading all aspects of the OBD control strategy development process for a specific technology project including: leading the strategy development, control implementation design, regulatory assessments, setting algorithm performance KPIs, developing calibration methodologies, and competitive benchmarking.

Requirements:
• Bachelor of Science in Control System Engineering, or Mechanical/Electrical Engineering, or Aerospace/Aeronautical Engineering from an ABET accredited university.
• The ideal candidate will have a deep understanding of propulsion system control and OBD requirements and regulations for gasoline and electrified systems.
• Minimum 3 years of experience in OBD controls development - an advanced degree and/or academic research in a related field may count towards experience requirement.
• Demonstrated technical problem solving
• Strong overall knowledge of internal combustion engines & electrified propulsion systems.
• Experience with modeling, simulation, development, testing, and validation.
• Outstanding interpersonal, communication, and problem solving skills.

Preferred Requirements:
• Master of Science in Control System Engineering, or Mechanical/Electrical Engineering, or Aerospace/Aeronautical Engineering from an ABET accredited university
• Demonstrated application of technical excellence in OBD control strategies
• Deep understanding of propulsion system OBD requirements and regulations
• Engine calibration and/or embedded software experience
• Knowledge of propulsion control systems
• Instances of demonstrated application of technical excellence (developed new process, experimental or computational; developed new numerical or modeling procedure; developed new statistical procedure; developed new problem solving approach; etc.)
• Experience with data acquisition and analysis tools such as ETAS-INCA
• Experience with model-based development tools such as MATLAB/SIMULINK

Job Number: 2010122460
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 12/09/2020
Last Updated: 03/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Control Engineer

Description:
804 Technology is currently looking for Propulsions Systems Control Engineer for a long term contract job opportunity located in Fort Worth TX. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

Salary is based on experience and Per Diem is available to those that qualify.
Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description
The Future Long-Range Assault Aircraft (FLRAA) Future Vertical Lift (FVL) Program has an opportunity available for a Propulsion System Controls Engineer. The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements.

Position Responsibilities:
• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:
• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:
• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:
• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Job Number: Propulsion804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Controls Engineer

Description:
The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements. This is for an entirely new aircraft design and function.

Position Responsibilities:

• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:

• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:

• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:

• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

Job Number: 11617740
Job Location: Fort Worth, TX
Rate: $75.00
Per Diem: Possible
Overtime: Yes
Duration: One Year May Be Extended
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021

QUALITY CONTROL INSPECTOR

Description:
PDS Tech, Inc. is seeking Quality Control Inspector in in Wichita, KS.

Summary:

I Responsibilities: 1. Inspect, identify, repair, and data entry on the leak points in valves and hydraulic components using hydraulic tester
2. Should be able to use the hydraulic tester and helium sniffer effectively after the training

3. Effectively use signal detectors to identify leak points in hydraulic components

4. Should be able to work in a fast-paced environment

5. Effectively communicate defects back to operators/team leads

6. Complete tasks by following work instructions, process sheets, check sheets, photos, and carrying out assignments given by Supervisor in an efficient manner

7. Responsible for helping to maintain good housekeeping practices in accordance with company requirements

8. Rotate between three consecutive work stations to compete various assembly tasks

9. Perform all tasks within safety guidelines.

10. Contribute to the continuous improvement process.

11. Perform other duties as assigned by lead person or department team leader

Qualifications:

1. Good understanding on the nomenclature and function of valves and hydraulic components used in skid steers

2. Hands on experience in assembly

3. Knowledge in WCM principles

4. High School Diploma or GED

5. 2+ years of experience working within a manufacturing or industrial environment with at least 3 months in production setting

6. Ability to work with computers and software systems

7. Ability to read, write, and comprehend simple instructions, short correspondence, and memos

8. Must be able to lift up to 50 pounds

9. Ability to perform each essential duty and physical requirements satisfactorily

10. Familiar with database front end usage is a plus

11. Previous experience with signal detectors is a plus

Job Number: 2010122832
Job Location: Wichita, KS
Duration: 6 months
Input Date: 12/15/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PKEXQA4&URLSource=cjhunter

Quality Assurance Engineering

Description:
A quality assurance engineer creates tests to find any problems with software before the product is launched. They identify and analyze any bugs found during testing and document them. They also must to pay very close attention to detail and coach their team on managing testing tools, reporting results, and motivating process improvement. A normal work day for a quality assurance engineer includes developing new tests to run, running the tests, and documenting the results; if any defects are noted the quality assurance engineers will need to collaborate with the software developers to find a fix and patch the program. Once the defect has been patched, they will need to run the test again to make sure there are no new bugs and to make sure the defect found has been corrected.

Job Number: 2010119839
Job Location: Atlanta, GA
Duration: 4 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P9bOQAS&URLSource=cjhunter

Quality Engineer III - Precision Measurement

Description:
Responsibilities:

Develop Inspection work instructions for precision measurement on aircraft sized product, defining steps, datum selection and location , and measurement, documentation and tolerance evaluation of Engineering Drawing requirements

Monitor and verify accuracy and consistency of setups to address; thermal affect and structural movement

Authority for interpretation of Geometric Dimensioning and Tolerancing.

Feeding inputs into production schedule on planned inspections

Generates time standards and resource plans for needed inspection resources Authority for acceptable errors for inspection and fit reliability assessments to verify requirements are met

Responsible for digital inspection training/qualification/operation procedures Coordinates inspection of critical tooling re-validations

Responsible for equipment acquisition and software coordination and planning

Monitor industry for latest releases, new technology

Serves as authority for inspection review and data analysis

Expert in the inspection software and tools utilized

Must-haves:

Bachelor's degree in a related Engineering discipline and at least 6 years of relevant experience

Working knowledge of Faro Arm, Laser Scanner, Handi-Scan and Spatial Analyzer software

Knowledge of Quality System requirements and contract quality requirements

Experience in manufacturing and inspection

Ability to read and interpret technical drawings and schematics, parts lists, specifications, instructions and test procedures

Knowledge of SO9001, AS9001 standards

Preferred:

Experience in the aerospace and defense industry

The Structures Company is an AA/EOE.

Job Number: 433
Job Location: CO
Rate: $55-$58/Hr. ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 6 Month - CtoH
Start Date: ASAP
Input Date: 01/14/2021
Last Updated: 03/05/2021

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Quality Systems Specialist

Description:
• Must have experience with either MM, or CMM machine experience.
• Must have Romer, or Faro Arm equipment experience.
• Must have experience with either Verisurf, Catia, or Polyworks software (Verisurf is preferred).
• Must have experience with GD&T Y14-5 principles to conduct 3D inspections on composite and metallic parts (mostly composite). Will be inspecting hole locations, diameters, planes and geometric dimensions.
• Team player, willingness to learn and flexible to move from job to job
• Must have minimum high school diploma and 5 years with CMM or MM experience
• Any aerospace company would be a plus

The Structures Company is an AA/EOE.

Job Number: 432
Job Location: MS
Rate: ***DOE***
Per Diem: Possible
Duration: 6+ Month CONTRACT TO HIRE
Start Date: ASAP
Input Date: 12/08/2020
Last Updated: 03/05/2021

Real Time Software Engineer Top Secret

Description:
PDS Tech, Inc. is seeking a Real Time Software Engineer in El Segundo, CA

Description
•Develop, integrate, and test of embedded flight software on a rapid development satellite program.
•Contribute to the full software life cycle.
•Partner with systems engineering and test to write software that meets program needs.
•Coding the engineers duties (which will include helping develop the software team to derive software requirements, evaluate software reuse, and define software architecture).
•Facilitate translation of detailed requirements and algorithms into flight software by closely working with subject matter experts and the software team.
•Define software-in-the-loop environments as well as a hardware-in-the-loop integration and test environments.

Education
•BS degree in Computer Science, Math, Physics or Engineering is required.

Qualifications
•Experience with a range of computer programming languages; must be fluent in C/C++
•Experience developing on a Linux operating system

Preferred Qualifications (Desired Skills/Experience):

•A Bachelor's degree with 9 or more years' experience, or a Master's degree with 7 or more years' experience, or a PhD with experience is desired.

•Experience (highly desired) with agile development processes and methods

•Experience in development, build and test of small and medium-sized spacecraft

•Experience in a dynamic rapid prototyping environment

•Prior history working proprietary programs with a variety of Government entities in a classified environment

•Experience developing middleware software

•TS/SSBI highly desired

•Experience with Real Time Operating Systems, such as Integrity, Real-Time Linux or vxWorks

•Knowledge of low-level programming with real-time constraints (example APIs include Unity and the Unreal Engine)

•Knowledge of computer hardware architectures and the extent to which they influence low-level software

Job Number: 2010119879
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215
City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P9fpQAC&URLSource=cjhunter

Reliability & Maintainability Engineer 3 & 4

Description:
Job Description:

Analyzes requirements and develops an R&M engineering program to achieve customer objectives.
Analyzes projected utilization and calculates effect on final system reliability based on individual part reliabilities.
Allocates top level R&M quantitative requirements to design teams. Performs reliability predictions and track performance.
Develop FMECAs; Support Airworthiness and safety engineering as required
Perform Maintainability Analysis; leverage human factors and quality engineering best practices
Perform Reliability Centered Maintenance (RCM) analysis; leverage MSG-3 best practices
Perform Reliability Development Testing (HALT/CAST)
Perform R&M analyses and assessments on selected systems and influence Fault Detection and Isolation BIT requirements
Run scripts to translate these models into a form that is executable logic on the aircraft, and simulate intended operation.
Work with the real-time software development team to integrate the resulting executable applications into the Mission Computing hardware.
Develop Testability models from schematics, FMECAs, ICDS and other available supplier documentation to assess compliance to customer fault detection/isolation requirements. Perform Failure Modes and Effects Testing (FMET)
Develop FRACAS plan and deploy closed loop FRACAS; lead FRB; Maintain RGC’s and perform Weibull Analysis

Required:

Minimum of 5 years experience performing R&M Engineering
Bachelor's, Master's, or PhD with 7 or more years' experience. Degree from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. ABET is the preferred, although not required, accreditation standard.
Radar / Propulsion / Avionics / Hydromechanical and other relevant Aero system knowledge required.
Microsoft Excel, MATLAB/Simulink, Boeing RAMC, and Vanderbilt FACT run time reasoning tools.
MIL-HDBK-217F Reliability Prediction Electronic Equipment.
Rome Air Development Center AD-A153 744 Reliability Derating Procedure.
MIL-STD-1629 Rev A Procedure for Performing a Failure Mode, Effects and Criticality Analysis.
The ability to obtain a US Interim Security Clearance clearance pre start, final post start which requires US Citizen.

Job Number: 2010110791
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBOQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Reliability Engineer

Job ID # 2021-12289

Contract Opportunity

Location: Sterling Heights, MI

Industry: Defense

Clearance Requirement: Ability to Obtain Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 3 years

What You’ll Do:

Interface / coordinate effectively with engineers, support organizations, and customer.
Occasional week day and / or week end overtime required.
Perform reliability engineering and statistical data analysis activities
Perform Reliability assessments of new concepts including:
Predictions and Allocations
Failure Modes
Effects Criticality Analysis (FMECA)
Reliability
Growth Analysis (RGA)
Logistic
Support Analysis (LSA)
Review TIRs and produce FACARs based on Engineering work
Perform Reliability Modelingusing Reliasoft, MADe Software
Support various program, provide reliability support to Engineering and Logisitcs
Maintain Reliability RAM-C model using modern Database tools, such asMS Access, MS Excel (required) and Python, R, SQL (desired)
Perform reliability assessment of design. Follow/monitor results of vehicle testing.
Investigate and report pattern incidents *Perform corrective action investigations
Conduct Root Cause and Corrective Action process, Lead and Maintain FRACAS
Interface with Reliability data bases and run Reliability models (Reliasoft, etc)
Prepare data for scoring/assessment conferences and upper management presentations
Run Design for Six Sigma and Robust Engineering projects

What You’ll Need:

Ability to Obtain Secret clearance is required.
Experience in reliability/maintainability disciplines is highly desired.
Personal computer skills (competent with MS Office applications, Databases, Data Analysis), desired
Programming Languages - Python, R, SQL, Java, etc.
Experience in report preparation and technical writing beneficial.
Ability to read and interpret technical drawings (blueprints, schematics, hydraulic and pneumatic flows)
Some travel required (minimal).

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Electrical, Mechanical, or Computer science combined with 3+ years of relevant work experience.
Masters degree in Engineering is preferred.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12289
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/11/2021

SENIOR PROGRAMMER

Description:
SENIOR PROGRAMMER
Ensures adherence to established standards and may consult with senior managers on technology solutions. Supports existing business systems applications and may be responsible for leading technical aspects of a project. May be responsible for assigning resources and delegating tasks to meet project deliverables. Performs additional job duties as required.

Bachelor’s Degree at College of Engineering and Technology, or equivalent work experience
3 years minimum IT work experience
Expert in multiple languages and tools. Strong knowledge in emerging technologies. Possesses strong knowledge of application development technologies, tools, methodologies as well as all functional areas in IT organization.
Good understanding of how technology relates to business, market and industry and applies such knowledge to support the needs of the business.
Works on highly complex projects and issues within functional technical area.
Works more independently with IT functional units and business units. Recommends strategies for technical aspects of projects as well as broad system improvements.
Coaches and leads less experienced IT staff and business managers. Provides leadership on projects.

Must Haves:
1. .NET C#/VB
2. ASP.NET
3. MSSQL, Other databases
4. REST service experience
5. Enterprise software experience

Nice to Haves:
1. Architecture experience
2. Java or other language experience
3. Javascript, JQUERY
4. Angular or REACT

Job Number: 2010120183
Job Location: Omaha, NE
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SEPv4 Integration Infrastructure & Test Engineer

Description:
SEPv4 Integration Infrastructure & Test Engineer

Job ID # 2021-12290

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

What You’ll Do:

Support for the Abrams SEPv4 vehicle electronic system. This engineer will be responsible for.
Analyzing test plans and electronic system design information for testability needs
Developing integration benchtop capabilities per the Integration Lead's direction:
Dynamic system modeling using tools such as MatLab / Simulink and NI Veristand
Generating network stimuli using tools such as Vector CANoe
Developing Windows-based software applications via Visual Studio .NE
Developing integration life-cycle capabilities, including, but not limited to:
Interface management systems
Inventory management systems
Autocade generation
Developing test scripts using tools such as NI TestStand
Stat using integration test progress on a regular basis
Regular collaboration with the Program Management, System Engineering, Subsystems Engineering, Hardware Engineering, and Software Engineering teams

What You’ll Need:

Experience testing embedded software
Experience developing test applications in NI Veristand, Vector CANoe, Simulink, NI TestStand, or equivalent technology
Experience developing or working with relational databases
Experience developing with MS Visual Studio .NET
Experience developing in Visual Basic, C#, or C++
Experience using Wireshark
Experience with reading and understanding electrical schematics
Working knowledge of HIL, signal conditioning, simulation, and data acquisition
Familiarity with standards such as PCAP, PTP, and PRP

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Electrical Engineering required with a minor in Computer Science or Computer Engineering preferred, combined with 5 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12290
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/11/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SW/Test/Cybersecurity Engineer

Description:
RESPONSIBILITIES:
Create and maintain COTS software tools for integration into software and system build environments; analyzes software requirements; contributes during requirements and design reviews; creates high and low level software design configuration documentation; develop and scan software, create plans for cybersecurity software implementation, and integration of software into system and build environments. Provides long term maintenance and updates for delivered software tools used for test stations. Takes direction from lead engineer and works with individuals from various software development groups. Performs other related duties and assignments as required. Job will require candidate to become an expert knowledgeable of MS Windows 10 Enterprise Operations Systems & Integrated Development Environments (IDE). Candidate must be dedicated, self-motivated and able to work with minimal supervision, work well with other engineers, and be willing to accomplish program goals within cost and schedule.

REQUIRED EXPERIENCE:
Experiences in cybersecurity software build design and configuration Experience in cybersecurity requirements allocations Experience with the cybersecurity COTS Integration Knowledge of cybersecurity requirements allocation and requirement tracing Excellent written communication skills Extensive experience troubleshooting technical systems Excellent presentation skills Embedded Software, C/C++, Configuration management, Requirements management, Software development on PC, Software development and configuration on MS Windows or UNIX

' Cybersecurity software build design and configuration -- 9-10 years experience
' Experience with the cybersecurity COTS Integration - 6-8 years experience
' Extensive experience troubleshooting technical systems/ Troubleshoot complex software and hardware issue during integration and test -- 6-8 years experience
' Labview / Knowledge of National Instruments apps (LabView or Test Stand) -- 4-5 years experience
' Embedded Software, C/C++
' Software development on PC, Software development and configuration on MS Windows or UNIX

DESIRED EXPERIENCE:
Direct Knowledge/Experience with test equipment System Architecture and networks Familiarity with the following standards: NIST 800-53 Security Controls and Risk Management Framework (RMF) Experience with security architecture concepts and test plan development and procedures Acquired security related certification or be willing to obtain a (Security +, CISSP, etc.) within 6 months of hire Knowledge of National Instruments applications such as LabView or Test Stand

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 188690
Job Location: Grand Prairie, TX
Rate: $90-108/hr DOE
Per Diem: Split possible
Overtime: not specified
Duration: 9 months
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/18/2021

Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Sales Support Specialist

Description:
PDS Tech, Inc. is seeking a Sales Support Specialist in Fort Mill, SC
Summary of key responsibilities:

1. Support regional sales leaders in weekly Forecast pulls, SFDC reporting, and Adhoc requests

2. Monitor progress of KPI’s such as visit trends, Training completion, Key Account plans using dashboards and SFDC reporting

3. Provide Sales Support in weekly regional staff calls, and various administrative duties

4. Assist with entering Commission Tickets to ensure timely and accurate pay for reps

5. Lead weekly Software pipeline review, and follow up on rail actions

Qualities that we look for in this position:

1. Associate degree or its equivalent with 1-2 years Sales support experience

2. Must have SFDC experience

3. Ability to follow prewritten operating procedures with limited supervision.

4. Self-motivated/driven and goal oriented

Job Number: 2110123478
Job Location: Fort Mill, SC
Duration: 4 months
Input Date: 01/12/2021
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003POLfQAO&URLSource=cjhunter

Senior Embedded Software Engineer

Description:
Duties: Design and implement software of embedded devices and systems from requirements to production and deployment. Design, develop, code, test and debug system software. Build real-time control software for directed energy products. Analyze and enhance efficiency, stability and scalability of system resources. Support software QA and optimize I/O performance. Provide post production support. Interface with hardware design and development. Assess third party and open source software.

Required Qualifications

- 5+ years development in C++
- Additional experience with one or more modern systems language(s): Python, Java, Go, Rust, etc.
- Versed in multithreaded design (concurrency primitives, resource management, etc.)
- Competent in computer science concepts (algorithms, data structures, object-oriented programming, etc.)
- Strong foundations in mathematics, linear algebra, and physics
- Adequate knowledge of reading schematics and data sheets for components
- Bachelor’s degree in computer science or similar discipline
- US Citizenship and/or Permanent Residency (Future security clearance may be required)

Desired Qualifications

- Experience building software for real-time operating environments with specific latency requirements
- Experience with Embedded Linux and/or software integration with FPGA firmware
- Knowledge or experience with digital signal processing (DSP) or radio frequency (RF) technologies
- Exposure or interest in sensor fusion, machine learning, or AI

We have developed technologies that leverage new breakthroughs in sensors and high-power microwaves, combined with computer vision and advanced software control. Our first broad-market application is a comprehensive defense system to defeat offensive drones at scale.

Job Number: 2010120468
Job Location: Hawthorne, CA
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PBIEQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Production Operator

Description:
Senior Production Operator

Job ID # 2021-12267

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

What You’ll Do:

Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
Read and interpret basic schematics and drawings
Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
Integrate sub-assemblies into final hardware
Perform final assembly of small systems
Perform basic electrical tests
Perform more complex rework and refurbishment of hardware and systems
May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
May conduct manufacturing inspections on processing line in accordance to quality specifications
May be involved in packing, movement and protection of finished product
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Perform general fabrication and marking
Operate less complex equipment
Perform basic loading and configuring of customer/standard software on customer device
Perform basic inspection per documentation
Accurately completes process paperwork and entering data into the applicable work order management system
Support continuous improvement activities and participates in problem solving activities
Maintain a clean and orderly work area
Support safety/housekeeping standards
Contact are primarily within immediate work unit and direct supervisor
Normally follows established procedures on routine work with limited supervision, requires detailed instructions only on new assignments
What You’ll Need:

Clear manufacturing process skills
Clear knowledge of polarity and inspection criteria
Clear knowledge of Bills of Material (BOM)
Clear knowledge of applicable work order tracking Management systems
Clear communication skills, both written and verbal
Ability to work in team environment
Clear computer skills
Clear knowledge of measuring equipment and math
Ability to use various computer software applications to analyze and manage data
Ability to interpret basic documents, work instruction, and schematics
Ability to exhibit adaptability/flexibility
Ability to lift a minimum of 25 pounds

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

High School Diploma/GED combined with 2 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12267
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Project Engineer

Description:
Inconen is looking for a Senior Project Engineer for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **

Duties:
1. Our client seeks a Senior Project/Product Engineer for their Huntsville, AL location.
2. The Senior Project Engineer will plan and perform propulsion program tasks in conjunction with program management.
3. Under limited general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements.
4. Additionally, you will coordinate ballistic, thermal, and structural analyses, as well as perform post-test examination, analyses, and reporting.

You should also have the ability to successfully:
1. Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques.
2. Conceive and plans projects involving the development of new methods to attain objectives.
3. Provide direction in problem investigations and resolution across functional areas.
4. Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated.
5. Prepare technical and design requirements in support of project goals.
6. Keep current in relevant technologies and methods in support of project assignments.
7. May provide technical guidance to less senior project engineers and project support personnel.
8. May be assigned Cost Account Management duties.
9. May perform as the engineering cost account manager.

Skills:
Required:
1. Three (3) or more years of experience with solid propellant propulsion projects is highly desired.
2. CAD knowledge is desirable.
3. Working knowledge of Microsoft Office software is required.
4. Aerospace experience desired.

Education:
1. Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering or related discipline and five (5) or more years of directly related experience.

Job Number: 12705
Job Location: Huntsville, AL
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 02/11/2021

Senior Software Engineer

Description:
A Senior Software Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for performing software requirements analysis, participating in research, designing, developing and testing software and tools, to include development of new work products or enhancing existing applications. To be considered for this role, you will have a bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience; agile experience preferred. Department of Defense Top Secret/SCI security clearance is required at time of hire.

Senior Software Engineer Job Duties:
*Perform technical planning, verification and validation of others work, cost and risk analysis, and supportability and effectiveness analyses for total systems
*Apply the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of technical engineering products
*Research and analyze data, such as customer design proposals, market trends, state of technology and industry, specifications and manuals to determine feasibility of design or application
*Support and develop our technical culture by being engaged, intellectually curious, friendly, motivated to solve complex problems, and inspired to deliver superior user-centered design
*Participate in internal reviews of software components and systems

Qualifications:
*Strong fundamentals in data structures and algorithms
*Solid object oriented programming and software design skills
*Proficient in one of the following: Java, C++, C, or JavaScript (using object oriented techniques)
*Web Services knowledge such as HTML, CSS, JavaScript, React, and Redux
*User Interface development
*Computer science theory (e.g., data structures, algorithms, computational complexity)
*Appreciation for user-centric design
*Full use and understanding of software engineering concepts, principles, and theories
*Effective communication and attention to detail
*Deep exposure to Unix/Linux systems as well as Windows

If you are interested in this Senior Software Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

Job Number: 307943
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2020
Last Updated: 03/05/2021

Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
City, State: West Region
Email: sswatkins@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=307943&job_number=307943

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Stock/Receiving Associate

Description:
Senior Stock/Receiving Associate

Job ID # 2021-12268

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

What You’ll Do:

Possess necessary computer skills to proficiently handle routine tasks
Perform the physical or administrative tasks involved in the receiving, storing, distributing and order
Fulfillment of materials, parts, supplies, and equipment
Accurately completes paperwork or system transactions applicable to functions such as receipts or issues
Awareness of company policy and procedures related to job function
Communicate clearly with coworkers, planners, material managers, and internal customers
Maintain accurate stockroom, inventory and system data
Research material shortages and supports problem solving resolution
May gather data for internal audits and extract reports from various computer systems
May handle and process classified material
What You’ll Need:

Lifts heavy items
Ability to heavy items and operate a forklift or other power industrial vehicles
Good computer skills with knowledge of the enterprise software tools (MRP, Receiving) and associated data
Clear knowledge of material receiving, control and inventory methodology
Clear knowledge of Government Customer Property Control
General working knowledge of material receiving, control and inventory methodology
General knowledge of receipt and storage of product
General customer service skills
General collaboration skills
General working knowledge of the enterprise software tools (MRP and Receiving) and associated data
General problem solving skills
General knowledge of Government Customer Property Control
Ability to track, expedite, and pick material shortages to the manufacturing floor
Certification in assigned area is preferred if appropriate.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

High School Diploma/GED combined with 2 + years of relevant work experience.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12268
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021

Senior Technical Publications Analyst

Description:
PDS Tech, Inc. is seeking a Senior Technical Publications Analyst for an open position in Huntsville, AL.
Description:

Maintain detailed records of all publication changes and source documentation and be able to provide metrics to management.
Host/attend Program Reviews as needed to draft/review content or address comments/concerns.
Investigate/reply to customer comments and coordinate with engineering and suppliers to address comments/concerns as necessary.
Identify areas of opportunity to improve day to day operations and implement ACE tools that aid on waste elimination and process improvement.

Candidate must have knowledge of US Army UH60 A/L/M and International S-70i and S-70A Publications.
Knowledge of MIL-STDs 40051B, 40051C, 40051-1C and S1000D.
Prefer 10+ years experience on UH/MH/HH-60 or S-70 Black Hawk helicopter as either a mechanic, electrician, or avionics maintainer.
Highly proficient in Extensible Markup Language (XML)

Proficient in the use of at least one of the following Editing Software: ArborText, Ultra-Edit and Notepad++

Knowledge in the use of Sikorsky Proprietary Software: Contenta/XyVision

Knowledge in the use of Desktop Applications: Microsoft Office, Beyond Compare, Adobe Acrobat Pro, IADS-4 and IETMs

Ability to oversee multiple projects of varied size and scope

Effective communications skills (both written and oral)

Highly motivated

Strong organizational skills

Able to think and operate independently

Education: BA/BS Degree in Business Administration or related field esperience, or equivalent.

Experience: Prefer 10+ years’ experience on UH/MH/HH-60 or S-70 Black Hawk helicopter as a maintainer specializing in avionics. 4 to 7 years technical writing experience, XML interpretation and understanding, technical background, ability to read and interpret Engineering wiring diagrams, Engineering structural diagrams, Engineering Change Notices (ECNs), Engineering Change Proposals (ECPs), Publication Change Requests (PCRs), and vendor data to aid in incorporating changes into existing publications and/or authoring new publications and various other technical data related to assigned tasks

Job Number: 2010116052
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 11/14/2020
Last Updated: 03/05/2021

Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OwrKQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Engineer

Description:
A Test Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will support component, system and drive testing in a variety of capabilities; Production, R&D and Qualification Testing. You will also be responsible for the functional status, calibration, and readiness of test equipment and instrumentation. To be considered for this role, you will have a B.S. Degree in Engineering along with a minimum of 5+ years' experience in test engineering

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Test Engineer Job Responsibilities:
* Design, modify, or develop test stands, equipment, and test processes for specific projects
* Conduct analytical engineering studies on proposals to develop tests for products
* Plans, schedules, and tests of complex hydraulic and pneumatic control systems and components
* Select the proper equipment and instrumentation, plus lays out test facilities
* Working knowledge of MIL-STD-810 and DO-160
* Develops quotes, selects labs and supervises outside lab testing
* Evaluates engineering test data to determine feasibility of product proposals
* Analyze product or equipment specifications and performance requirements to determine designs that can be produced by existing manufacturing or processing facilities and methods
* Create comprehensive test procedures and prepares detailed test reports
* Work with Design Engineers to ensure appropriate test preparation and execution by identifying in-house resources or sourcing new software, instrumentation, or external test labs
* Develop operating procedures for test equipment
* Assist Design Engineers in executing tests and manage test safety throughout testing
* Install, configure, and calibrate instrumentation used for data recording for drive testing
* Document test setup information for test reports, including conformity/discrepancy records

Test Engineer Job Requirements:
* B.S. in Engineering with 5+ years' experience in test engineering
* Experience developing data acquisition programs in LabVIEW & MATlab, Python, VBA or similar software
* Proven experience in a testing environment operating test equipment
* Experience with SolidWorks or similar CAD software
* Outstanding organization, analytical, and problem-solving skills
* Proven experience conducting development and certification testing of mechanical or electrical hardware
* Familiarity with ASTM, SAE or FMVSS testing and documentation
* Experience operating typical mechanical and electric test equipment - Multimeters, oscilloscopes, soldering stations, load cells, tensile testing machine(s), etc.

If you are interested in this Test Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 303448
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/03/2020
Last Updated: 01/13/2021

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance

Job Location: Denver, CO
Input Date: 11/23/2020

Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

Software Development Engineer

Description:
Position Purpose:
The Software Development Engineer serves as a technical leader in the Software Engineering Department and plays a key role in developing industry leading software for our customers. In this role you will be responsible for defining, developing, and testing complex technical and architectural solutions that support Bank Solutions product strategies and address the market needs of Fiserv clients and their customers.
As a Software Engineer you will have the opportunity to work on a wide variety of projects, where you can apply your existing knowledge to solve new market problems on almost a daily basis.
This is a full-time position in a highly collaborative environment working with other skilled software professionals to deliver high quality software to help clients improve the way they do business.

Business Description:
Analyzes technical and business procedures and assists in the development of detailed specifications from which programs will be written. Develops, codes, tests, debugs, maintains, modifies, and installs computer software. Recommends major changes in procedures and software development activities.

Essential Job Responsibilities:
o Lead in developing complex applications based upon technical and functional specifications
o Assisting in the development of and adhering to technical and functional standards
o Under limited direction, research, define, & complete required additions and changes to financial software products
o Under limited direction, analyze technical specifications for both creation of new or enhancing existing applications for compatibility with other systems
o Participate in strategic planning sessions and technical discussions and demonstrate the ability to assist in translating ideas into technical designs
o Design technical and functional specifications used in the development of Fiserv software, specifically in the Banking product spaces
o Interaction with internal team members across functional areas and across disciplines to include interaction with external clients and third-party entities as needed
o Under general supervision analyze and research client issues to determine/confirm software nonconformities
o Under general supervision, log, test and document Code-in-Folder/Hot Fix, Alert/Service Pack and other release cycled code corrections to include risk analysis for Software non-conformities
o Provide research assistance to other analysts and technicians as needed
o Adhere to technical and functional standards
o Performs other duties as required

Required Qualifications:
Education:
o A completed Bachelor’s Degree in IT, or an Associate’s degree in Computer Programming, or equivalent education in a related discipline is preferred.
Job Related Experience:
o Minimum 5+ years of experience required
o Work experience should include extensive knowledge of Core Banking products
o A successful candidate will have excellent analytical and problem-solving skills, strong communication skills, and a motivation to achieve best-in-class results
Additional Skills/Knowledge:
o Knowledge of programming (i.e. program design, flowcharting, coding, testing, debugging, etc.)
o Knowledge of how to document program design, coding, and maintenance.
o Understanding of how critical project completion is to client satisfaction.
o Knowledge of the relationship between software and hardware interaction.
o The ability to interact with external and internal clients for the purpose of data gathering and design initiation.
o Experience with VB.NET, C#, and Application Server development.
o Familiarity with Microsoft® Word & Excel
o Financial industry interest and experience is beneficial
o Must possess strong knowledge in C#, VB.NET 4.6
o Must have experience in window application using C#/VB.NET
o .NET Remoting, Windows Workflow Foundation, Multi-threading, Asynchronous communication
o Experience with XML
o Experience with SQL server and SQL Skills
o Experience in using SDLC tools including GitHub, JIRA and Jenkins
o Experience in Wireshark and Process Monitor
o Experience in Agile teams
o Experience in Automation using Appium
o Experience in DevOps and CI/CD

Job Number: 2010121981
Job Location: Lincoln, NE
Duration: 12 months
Input Date: 12/02/2020
Last Updated: 03/05/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Development Engineer - TCAS

Description:
This position is responsible for software development activities for a TCAS system in accordance with DO-178 lifecycle. Activities include development of software requirements, software code, and software verification test cases and procedures.

REQUIRED SKILLS:
- Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
- 5+ years Aerospace Engineering experience
- Knowledge of DO-178 full lifecycle development process and its application in the development of complex systems software
- Experience with requirements capture and management, and associated tools
- Experience translating software requirements to C/C++ language code
- Experience in development of detailed design documents
- Experience translating software requirements to software verification test cases
- Experience developing software verification test procedures
- Familiar with Software Change Request (SCR) processes and tools
- Familiar with software configuration management processes and tools

PREFERRED:
- TCAS product experience
- AAA or ASDB experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12-18 months
Start Date: 1/4/2021
Input Date: 01/05/2021

Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Inconen is looking for a Software Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

** Worker will Telework >= 50% **

Job Description:
Plans, conducts, and coordinates software development activities. Designs, develops, documents, tests, and debugs software that contains logical and mathematical solutions to business/mission problems or questions in computer language for solutions by means of data processing equipment. Applies the appropriate standards, processes, procedures, and tools throughout the development life cycle. Applies knowledge of computer hardware and software, subject matter to be programmed in business/mission applications, information processing techniques used, and information gathered from system users to develop software. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Ensures software standards are met.

Mandatory Skill Set
• SQL, XML, Java, Angular, Python
• API Development
• MS SQL Server
• COTS version control SW
• REST
• MS SQL Server DB Admin
• Hibernate or other ORM libraries
• SQL, Java
• Relational DB Design and Architecture experience
• COTS version control SW

Desired Skills:
• Javascript
• IaaS
• Unix
• Visual Studio
• Eclipse
• VMWare
• Artifactory
• Postman
• Experience importing and managing large data volumes
• User and role configuration experience with SQL Server databases

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS

Job Number: 12721
Job Location: Orlando, FL
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 01/13/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Inconen is looking for a Software Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

** Worker will Telework >= 50% **

Job Description:
Plans, conducts, and coordinates software development activities. Designs, develops, documents, tests, and debugs software that contains logical and mathematical solutions to business/mission problems or questions in computer language for solutions by means of data processing equipment. Applies the appropriate standards, processes, procedures, and tools throughout the development life cycle. Applies knowledge of computer hardware and software, subject matter to be programmed in business/mission applications, information processing techniques used, and information gathered from system users to develop software. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Ensures software standards are met.

Mandatory skill set
• REST
• Relational Database Design and Architecture experience
• Search Optimization experience
• Performance Optimization experience
• System Administration experience
• Database troubleshooting experience
• Database administration (DBA) experience
• Software architecture experience
• Data Structure optimization
• Leadership experience
• SQL, XML, Java, Angular, Python
• API Development
• MS SQL Server
• COTS version control SW
• MS SQL Server DB Admin
• Hibernate or other ORM libraries
• COTS version control SW

Desired Skills:
• Javascript
• IaaS
• Unix
• Visual Studio
• Eclipse
• VMWare
• Artifactory
• Postman
• Experience importing and managing large data volumes
• User and role configuration experience with SQL Server databases

Education:
1. Level 4: BS+16 YRS or MS+14 YRS

Job Number: 12724
Job Location: Orlando, FL
Rate: $80.00 - $100.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 01/13/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Job ID # 2021-12299

Contract Opportunity

Location: St Charles, MO

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 9 Years

What You’ll Do:

Lead activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
Lead development of code and integration of complex software components into a fully functional software system.
Develop software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.
Provide technical leadership for software projects and leads software supplier management activities.
Lead development, selection, tailoring and deployment of processes, tools and metrics.
Plan, execute and document software research and development projects.
Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
Track and evaluate software team and supplier performance to ensure product and process conformance to project plans and industry standards.
Work under minimal direction.
What You’ll Need:

Preferred experience in C and Ada programming languages in embedded environments.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 9 + years of relevant work experience or an equivalent combination of technical education and experience; or Master’s combined with 7 + years of relevant work experience. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12299
Job Location: St Charles, MO
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/13/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Job ID # 2021-12298

Contract Opportunity

Location: St Charles, MO

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 9 Years

What You’ll Do:

Lead activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
Lead development of code and integration of complex software components into a fully functional software system.
Develop software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.
Provide technical leadership for software projects and leads software supplier management activities.
Lead development, selection, tailoring and deployment of processes, tools and metrics.
Plan, execute and document software research and development projects.
Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
Track and evaluate software team and supplier performance to ensure product and process conformance to project plans and industry standards.
Work under minimal direction.
What You’ll Do:

Preferred experience in test and development scenarios. Preferred languages: C and Ada

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:

Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics or Chemistry combined with 9 + years of relevant work experience or an equivalent combination of technical education and experience; Master’s Degree combined with 7 + years of relevant work experience. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

Job Number: Job ID # 2021-12298
Job Location: St Charles, MO
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/13/2021

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Note: Active Secret Clearance is required for this role.
Acts as a SME to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
Skill Set: Communications and/or Datalink Software Development, ADA Language, SATURN/SINCARS, Communications/Datalink bus development. (required but not mandate)

Job Number: SE_OKC
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 06 months
Start Date: ASAP
Input Date: 01/11/2021
Last Updated: 01/22/2021

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Software Engineer 3

Description:
Chipton-Ross is seeking a Software Engineer 3 for an opening in Herndon, VA.

RESPONSIBILITIES:
� Participate in engineering control system development tasks including preliminary design, design, integration and formal testing.
� Full software life cycle application development, use of waterfall, spiral or agile methods.
� Designing, coding and debugging applications in various software languages.
� Software analysis, code analysis, requirements analysis, software review, identification of code metrics, system risk analysis and software reliability analysis.
� Object-oriented Design and Analysis (OOA and OOD)
� Software modeling and simulation
� Front end graphical user interface design
� Software testing and quality assurance
� Performance tuning, improvement, balancing, usability & automation.
� Support, maintain and document software functionality
� Integrate software with new and existing systems
� Evaluate and identify new technologies for implementation
� Maintain standards compliance
� Participate in development of long range planning for new projects and facilities
� As new technologies emerge and impact our systems, Expected to learn new technologies very quickly as they emerge and resolve problems

REQUIRED EXPERIENCE:
� Five+ years of prior software development work experience with C/C++ , preferably with automation and control systems
� Customer site field experience.
� Works well individually or in a group setting.
� Ability to work under pressure and time constraints
� Ability to solve problems quickly and completely
� Ability to identify tasks which require automation and automate them
� Possess a positive attitude with ability to "think outside the box"
� Excellent writing skills.
� Familiarity with the following software: C/C++, Ant, Python, Subversion, Confluence, JIRA.

EDUCATION:
Accredited Bachelor�s Degree in Computer Science or related engineering field

WORK HOURS:
9/80
Full-Time

Job Number: 188338
Job Location: Herndon, VA
Rate: Up to $58.00 DOE
Duration: 6 Months
Input Date: 11/23/2020
Last Updated: 03/05/2021

Firm Name: CHIPTON ROSS
Attention: Zachary Fasano
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: zfasano@chiptonross.com
Website: www.chiptonross.com

Software Engineer 4

Description:
PDS Tech, Inc. is seeking Software Engineer in Colorado Springs, CO

Basic Qualifications (Required Skills/Experience):

•Active Top Secret U.S. Security Clearance with ability to obtain a Sensitive Compartmented Information (SCI) Security Clearance

•Bachelor's Degree or higher education

•Experience with C++ design, coding and test

•Experience working in an Agile Environment utilizing tools like Atlassian Suite (Jira, Confluence, Bitbucket, etc)

•Establish a requirements baseline including analysis, derivation, allocation, and traceability of requirements and interfaces, including external systems and organizations

•Experience with requirements management and test process management (TMP) including the use of tools like Rational Dynamic Object Oriented Requirements System (DOORS)

•Experience identifying, performing and review design decisions, conducting trade studies and architecture improvements

•Experience decomposing complex requirements into executable discrete user stories

•Experience working with model-based systems engineering (MBSE) tools like Cameo Enterprise Architecture

Preferred Qualifications (Desired Skills/Experience):

•Sensitive Compartmented Information (SCI) Security Clearance

•Experience establishing and supporting system level management and interfaces

•Experience with software testing at different levels including component, configuration item, subsystem, integration/system, and acceptance testing

•Experience working with system components for satellites and ground systems

•Experience with Linux operating system

•Experience working in DevSecOps or DevOps Continuous Integration / Continuous Delivery environments (CI/CD)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Job Number: 2010121984
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 11/25/2020
Last Updated: 03/05/2021