Job Search Results

603 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/03/02 Tuesday 06:28PM Pacific Time by ContractJobHunter. )

Listings 1 - 603

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
166498
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Desired Start Date: 1/13/2020
End Date: 4/30/2020
Position Type: Contract

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging experience desired


Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 26-29/hr max
Duration: 4 months + extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Will perform Material Review Board (MRB) Engineering, primarily for structural related details, assemblies and installations on the F-22.
2. Will be responsible for providing dispositions to non-conforming material documents.
3. Experience with aircraft interchangeability / replaceability requirements, tool usage in an aircraft production environment, F-22 blueprint and specification familiarity, and basic aircraft systems knowledge is strongly preferred. 4. Will be required to coordinate across a large number of functional areas, including Manufacturing, Quality Assurance, Structures and Systems groups, Safety, Material and Processes and Special Technology.
5. CATIA proficiency is preferred. Previous aircraft MRB authority is highly desired.
6. Must be a US Citizen.
7. This position is located at a facility that requires special access.
8. This position requires a Final Secret Clearance to start.
9. Second shift coverage, weekend work, odd shifts and holiday work may be required to support the test schedule.

Desired skills
1. Good technical, communication, team, and presentation skills.
2. Previous Material Review Board (MRB) Authority.
3. Major in CE, ME, or AE preferred.
4. Desired skills CATIA 3D Modeling.
5. GD&T understanding.
6. Composite repair.
7. Final finish/spec tech familiarity.
8. Interchangeability requirements knowledge.
9. QADs/ DIMS/ related software experience.
10. Some weekend, odd shift and holiday work may be required.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11935
Job Location: Edwards AFB, CA
Rate: $80.00 - $91.53/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. Interim Clearance would be acceptable****

Job Description:
1. Function as an F-35 Low Observables (LO) engineer and subject matter expert.
2. Five (5) years minimum Low Observables and/or radar signature experience.
3. Research defects, author engineering dispositions, and provide detailed instructions for F-35 aircraft.
4. Explain, oversee, and assist with repairs.
5. Lead non-standard LO work.
6. Provide schedule, labor, and materials estimates.
7. Interface with maintainers, engineers, and management, both at PAX River Integrated Test Force and externally.
8. Provide LO-related briefings. Assist QA with inspections.

Desired Skills:
1. Capable of interpreting aircraft low observable engineering drawings.
2. Good technical report writer and photographer.
3. Proficency with Microsoft Office suite (Word, Powerpoint, Excel, Outlook) or windows operating system.
4. Familiar with F-35 LO materials suite.
5. Familiar with F-35 JTD, PDM, JDL, LOHAS, RVR, and F-35 specs.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11943
Job Location: Patuxent River, MD
Rate: $57.48 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. The Pax Flying Qualities (FQ) Engineer's primary roles will be to support structural FQ flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft.
2. This includes providing real time control room monitoring support of FQ parameters on the STOVL and CV flight test aircraft, conducting pre-flight FQ predictions and post flight data requests, and supporting FQ flight test anomaly resolution and correlation of predictive aerodynamic databases with measured flight test data.
3. The successful applicant will be frequently required to attend briefings with the customer and represent LM.

Basic Qualifications
1. Experience with aircraft flying qualities analysis such as handling qualities, stability and control, and/or control law development.
2. Flying Qualities Flight Test experience

Desired skills
1. Experience with the F-35 FQ analysis methods
2. F-35 Flying Qualities and Air Data Flight Test Experience
3. The candidate must be able to work independently and proficiently with flying qualities analysis and flight test.
4. Good written and verbal skills are required.
5. MATLAB experience
6. Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook) and MS Windows operating system.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11938
Job Location: Patuxent River, MD
Rate: $57.48 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Flight Test Engineer
2. Provide Flight Test Engineering support for the full spectrum of ADP Flight Test activities from proposal development through post-flight test reporting.
3. Will be required to customize test processes to individual customers and circumstances. Assess prototype aircraft operations for risk and assist in develop appropriate mitigating procedures.
4. During test execution phase, support mission conduct, configuration management, troubleshooting, and asset scheduling.
5. Travel, overtime, odd shifts, and weekend work may be required.

Basic Qualifications:
1. Bachelor's degree in a STEM discipline
2. Flight Test conduct experience
3. Author of test planning documentation

Desired Skills:
1. Developmental test program experience
2. Presentation experience to company and customer audiences
3. Proposal development experience
 
Job Number: 11939
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret would be acceptable****

Job Description:
1. Flight Test Engineer for Navy F-35 test aircraft at Patuxent River NAS, Maryland.
2. The successful applicant will provide Ground and Flight Operations engineering support.
3. Tasks will include coordination and execution of pre-flight and post-flight activities to ensure aircraft's test readiness including issuance, and closure of documentation relating to work performed on the aircraft, and coordination of aircraft modifications.
4. Position may be responsible for control and tracking of aircraft configuration, coordinating and staging of support equipment, and coordinating with other organizations associated with test readiness.
5. Tasks include planning and executing weapons test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of weapons related test flights, requesting/analyzing post-flight data, and supporting weapons system anomaly resolution as well as on-aircraft troubleshooting of weapons related hardware.
6. May also include support flight science (Flying Qualities/Performance/Structural Loads/Structural Dynamics) flight test, providing real time control room monitoring support of the STOVL and CV flight test aircraft, conducting pre-flight predictions and post flight data requests, and supporting flight test anomaly resolution and correlation of predictive aerodynamic databases with measured flight test data.

This position will work with maintenance and engineering personnel. The ability to interface with all levels of project management is desired.
1. Developing and publishing test plans and flight test cards,
2. Determining and communicating aircraft test requirements and configuration to responsible engineering, maintenance, instrumentation, and flight operations personnel to ensure aircraft readiness,
3. Complying with published test safety plans and standard operating procedures,
4. Conducting test missions and performing test mission briefings and debriefings, after meeting qualification requirements.
5. Evaluating results from flight activities and incorporating 'lessons learned' into future test activities.
6. 'Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access.'
7. Position requires an interim secret clearance to start.

Desired skills
1. Demonstrated Verbal and Written Communication skills along with experience in LM applications and electronic tools: ALIS, JEDI, PDM, and JDL and wiring diagrams; aircraft ground test experience.
2. Plus to have a Bachelor's degree.
3. MATLAB experience
4. Proficient programmer and tool developer in FORTRAN, VBA, or C/C++.
5. Experience working with UNIX/LINUX based workstations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11941
Job Location: Patuxent River, MD
Rate: $57.48 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Flight Test Engineer supporting the F-35B and F-35C aircraft as a Test Conductor/Test Director within the F-35 Integrated Test Force, NAS Patuxent River, Maryland.
2. Position will work with military, contractor, and civil service personnel as members of the flight test team.

Duties and responsibilities include planning, scheduling, and executing flight test mission requirements by:
1. Interfacing with counterparts to define test requirements and priorities.
2. Developing test plans and flight test cards,
3. Determining and communicating aircraft test requirements and configuration to responsible engineering, maintenance, instrumentation, and flight operations personnel to ensure aircraft readiness,
4. Complying with published test safety plans and standard operating procedures,
5. Conducting test briefings & missions after meeting qualification requirements.
6. Participating in test missions as a Test Conductor/Test Director in a mission control room.
7. Participating in reviews of flight clearance documents, and aircraft operating limits.
8. Ensuring accurate and timely reporting of flight test program status and results.
9. Evaluating results from flight activities and incorporating 'lessons learned' into future test activities.

Basic Qualifications:
1. Extensive F-35 Test Conductor/Test Director experience.
2. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.

Desired Skills:
1. Technical group lead experience.
2. Ability to pass medical requirements required to participate in shipboard testing.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11942
Job Location: Patuxent River, MD
Rate: $57.48 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166409 Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB Catia - Clearance CA

Description:
167092 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2653-1
Max Pay Rate: $91.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will perform Material Review Board (MRB) Engineering, primarily for structural related details, assemblies and installations on the F-22.

Will be responsible for providing dispositions to non-conforming material documents. Experience with aircraft interchangeability / replaceability requirements, tool usage in an aircraft production environment, F-22 blueprint and specification familiarity, and basic aircraft systems knowledge is strongly preferred. Will be required to coordinate across a large number of functional areas, including Manufacturing, Quality Assurance, Structures and Systems groups, Safety, Material and Processes and Special Technology.
Second shift coverage, weekend work, odd shifts and holiday work may be required to support the test schedule.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

CATIA proficiency is preferred. Previous aircraft MRB authority is highly desired.

Desired skills
• Good technical, communication, team, and presentation skills.
• Previous Material Review Board (MRB) Authority.
• Major in CE, ME, or AE preferred.
• Desired skills CATIA 3D Modeling.
• GD&T understanding.
• Composite repair.
• Final finish/spec tech familiarity.
• Interchangeability requirements knowledge.
• QADs/ DIMS/ related software experience.
• Some weekend, odd shift and holiday work may be required.

Qty 1 position
 
Job Number: JE-2653-1S
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB F-16 - no clearance SC

Description:
167210 Job Title: Aeronautical Engineer

Work Site Address: Greenville, SC 29605
Job Number: 2918-1
Max Pay Rate: $44.00/hr
Start Date: 1/27/2020
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Looking for engineer to be part of the new Production of the F-16 and other project opportunities.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.
Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Primary duties of this job will support the Planning tasks as the production planning is created, support the on-site MRB engineers to include anomaly investigation, technical solution development and coordination with the MRB engineer for preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Additionally, this position requires skills as an Airframe Design Engineer to use their technical expertise to design aircraft structure and subsystems installations. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structure design. The candidate will be responsible for layout and detail modeling of aircraft structure, structural assemblies, layouts and detail drawings using CATIA V5 and CADDAM, participating in trade studies, creating and maintaining interface control drawings, and coordination with Integrated Product Teams.

The engineering candidate will be required to coordinate across many functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action.

Qualifications and Education Requirements
Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.
Candidate must value and support diversity.
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Skills: Category Name Required Importance Experience
Areas of Expertise CATIA No 4
Areas of Expertise F-16 No 2
Technical Skills Ability to Read Engineering Drawings Yes 1
Technical Skills Engineering Design Principles Yes 3
Technical Skills Configuration Management No 5

Qty 2 position
 
Job Number: JEG-2918-1
Job Location: Greenville, SC
Rate: 44/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / flight test - Clearance CA

Description:
167101 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2685-1
Max Pay Rate: $91.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Flight Test Engineering tasking across multiple ADP programs. On some programs will be the sole voice representing flight test Full spectrum of tasking from proposal development through post flight test reporting.

Will be required to customize test processes to individual customers and circumstances. Assess prototype aircraft operations for risk and assist in develop appropriate mitigating procedures.
During flight phase will be the primary individual for controlling test execution, configuration management, troubleshooting, and asset scheduling. Travel, overtime, odd shifts, and weekend work may be required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
- Flight Test execution experience
- Experience with authoring flight test documentation
- Configuration management experience
- Presentation experience to company and customer audiences
- Experience interfacing with all levels of customer management

Desired skills
-Developmental test program experience
-Test project lead or ship lead experience
-Mission Test Director experience
-Proposal development experience
-Must be willing to mentor junior-level team members


Qty 1 position
 
Job Number: JE-2685-1TS
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer (Flight Controls Dept)

Description:
As the Air Data Systems Senior Engineer you will report to the Flight Control Systems IPT Lead and be responsible for all activities related to the air data systems for the jet. In addition to a more traditional Air Data system this aircraft may require development of an optical air data sensing system to enable our Mach Cutoff System (MCS) control concepts.

On any given day you might:
  • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
  • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
  • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
  • Research new air data concepts and technologies that fit the Aerion technology roadmap
  • Provide validation and verification of air data systems requirements

    We're looking for someone who has:
  • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
  • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
  • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
  • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
  • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
  • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
  • Optical air data systems experience desired
  • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
     
  • Job Number: 42-030
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Design Support Engineers

    Description:
    Exp. with Mechanical Design of Composite & Metallic Components & Assemblies. Catia V5, Enovia PLM, ECR's
     
    Job Number: 1231
    Job Location: Baltimore, MD
    Rate: $60-$75 DOE
    Per Diem: yes-split
    Overtime: Possible
    Duration: 6 mos+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEK PROFESSIONALS INC
    Attention: Greg Ambrose
    Address: 103 CHESLEY DR STE 207
    City, State: MEDIA, PA 19063
    Phone: 610/534-8701
    800 Phone: 877/271-1799
    Fax Phone: 610/534-8697
    Website: www.hitekprofessionals.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Interiors Design Engineer - Solidworks

    Description:
    Position Summary:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes.

    • Must have Aircraft Interior Completions experience.
    • Must have a strong background utilizing Solidworks
    • Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
    • Must have 3D modeling experience in Solidworks

    The Structures Company is an AA/EOE.
     
    Job Location: Indianapolis, IN
    Rate: $50-57/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Painter - no clearance SC

    Description:
    166698
    Job Title: Aircraft Painter

    Work Site Address: Greenville, SC 29605
    Job Number: 2516-1
    Max Pay Rate: $29.00/hr
    Start Date: 11/4/2019
    End Date: 6/29/2020
    Position Type: Contract

    Job Summary:
    Coats surfaces of aircraft with paint, Polyurethane, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.

    Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and applies markings to include minor and major markings using stencil materials, insignia, letters, or numerals, on aircraft surface, using stencils.

    Qualifications and Education Requirements
    Ability to operate snorkel and scissor lifts.

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise Paint Process No 1 2 - 4 Years

    Qty 2 positions
    Manager asked to please inform candidates that the LM facility closes for Christmas break.
     
    Job Number: JEG-2516-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 8 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Stress Engineer Openings

    Description:
    Aircraft Stress Engineers needed.
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: IN
    Rate: Open / DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Aircraft Stress Engineers

    Description:
    Nastran, Patran a plus
     
    Job Location: GA/WI
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Structural Analysis Engineer (Level 2, 3, 4)

    Description:
    Future Vertical Lift Program

    Our client is seeking an Airframe Structural Analysis engineer to join the company’s Future Vertical Lift programs working
    new product development in an innovative and dynamic design environment. The Airframe Structural Analysis Engineer
    is responsible for analyzing airframe structures for stress and strength requirements, material selection, stiffness
    requirements, weight optimization, and performance for the company's Military and Commercial Programs. 


    Position Responsibilities:
    - Apply basic engineering principles/concepts to complete tasks under the supervision of the technical lead engineer
    - With technical oversight, applies scientific analysis and mathematical models to predict and measure the outcome and
    consequence of design, in terms of stress, strength, life, stiffness, and weight
    - Demonstrate critical thinking & creative 'out of the box' thinking
    - Communicate to team members effectively
    - Demonstrate basic knowledge of aircraft structure, Bell design and production processes, and structural analysis tools
    - Develop solutions to routine technical problems of limited scope

    Education Requirements:
    - Bachelor's Degree in Mechanical or Aerospace Engineering or equivalent is required
    - Master’s Degree is preferred

    Position Requirements:
    - Experience at all levels will be considered with a minimum of 2 years related experience.
    - PC proficiency in NASTRAN / PATRAN, Microsoft Word, Excel, PowerPoint, and Outlook is preferred
    - Previous structural stress and fatigue analysis experience preferred
    - Must have the ability to work effectively within a team
    - Must have the ability to prioritize a variety of assignments
    - Good interpersonal and organizational skills are required

    Please send resumes to Becky at bnorman@butler.com. Phone number is 469-785-4744.

    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 58547
    Job Location: Fort Worth, TX
    Rate: Market
    Per Diem: possible
    Overtime: possible
    Duration: 12 months
    Start Date: February 2020
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Becky Norman
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician

    Description:
    Avionic Technician

    Job ID # 2019-10491

    Contract Opportunity

    Location: Greenville, SC

    Industry: Aerospace & Defense

     

    What You’ll Do:

    Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
    Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
    Work from schematics, engineering drawings and written or verbal instructions.
    Operate related equipment; conducts tests and reports data in prescribed format.
    Perform calibration and alignment checks.
    Make adjustments, modifications, and replacements as directed.
    Prepare prescribed compounds and solutions.
     

    What You’ll Need:

    Modification experience strongly desired.
    Must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
    Areas if Expertise: C-130.
    This position supports a 9/80A-1st shift work schedule.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

     

    What to Expect:

    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
     

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

     

     

    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

     
     
    Job Number: 2020-10491
    Job Location: Greenville, SC
    Input Date: 11/14/2020
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    166688 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2464-1
    Max Pay Rate: $29.50/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

    Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 1 2 - 4 Years
    Areas of Expertise C-130H No 1 2 - 4 Years

    Qty 8 positions
    This is an URGENT request.
     
    Job Number: JEG-2464-1
    Job Location: Greenville, SC
    Rate: 29.50/hr max
    Duration: 8 months plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    167249 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2948-1
    Max Pay Rate: $29.00/hr
    Start Date: 1/16/2020
    End Date: 8/14/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

    Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
    Installs wire harnesses in aircraft to include routing and termination.

    Qualifications and Education Requirements
    Modification experience STRONGLY desired
    Must have previous aircraft modification experience.

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification Yes 1
    Areas of Expertise C-130 No 1

    Qty 10 positions
    Contract length likely to extend
    MORE RESUMES NEEDED
    Modification experience STRONGLY desired

    Manager motivated to make selections quickly
     
    Job Number: JEG-2948-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 8 months plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / C-130 desired - no clearance SC

    Description:
    165856/1895-1
    Avionic Technician
    Greenville, SC 29605
    29/hr max

    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

    Areas of Expertise C-130 No 1 4 - 6 Years

    Qty 5 positions needed
    Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
     
    Job Number: JEG-1895-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 6 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 11/23/2020
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
    2. Experience working electro-optic (EO) systems.

    Desired Skills:
    1. Active F-22 Project Clearance desired.
    2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
    3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
    4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
    5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11703
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Bachelor's degree in technical discipline
    2. Experience with Aircraft Avionics systems

    Desired Skills:
    1. Active F-22 Projects Clearance
    2. Experience presenting
    3. Experience with customer interaction
    4. Experience with AGILE
    5. Diligent at maintaining relevant members apprised of task status
    6. Experience with Microsoft Office tools (i.e. Excel, Outlook, and PowerPoint)

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11705
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
    2. Experience with developing and delivering software

    Desired Skills:
    1. Experience with fixed wing aircraft datalink and
    Communication/Navigation/Identifications systems.
    2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
    3. An understanding of the build, integration, and test processes
    4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11627
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer / avionics flight control systems - Clearance TX

    Description:
    166422
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2146-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    - Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
    - Experience with developing and delivering software
    Desired skills
    - Experience with fixed wing aircraft datalink and
    Communication/Navigation/Identifications systems.
    - Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
    - An understanding of the build, integration, and test processes
    - The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

    Qty 1 position
     
    Job Number: JE-2146-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Engineering (Structural/Mechanical)

    Description:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Unique Skills:
    • This position is in the Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad.
    • Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales.
    • Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations.
    • The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft.
    • Designers will create data consistent with industry accepted drafting practices and company standards.
    • Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule.
    • Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
    • Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Responsible for an entire engineering project of major complexity within established scope
    • Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    • Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    • Leads the development of innovative principles and ideas
    • Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    • Works under consultative direction; uses independent judgment to accomplish objectives
    • Develops standards and guides for diverse engineering activities
    • Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
     
    Job Number: 24-380
    Job Location: Appleton, WI
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer - Interior Furnishings

    Description:
    The ideal candidate will have experience in the following:
    1. Use of finite element analysis for both primary and secondary structures
    2. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations 3. A working knowledge of FAR part 25 certification requirements
    4. A good understanding of a fast phased completion style environment
    5. Working knowledge of FEMAP is required
    6. MRB experience for both Primary and Secondary Structures

    Education/Experience
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 24-366
    Job Location: Savannah, GA
    Rate: $68-$75/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Technician (20+ openings)

    Description:
    Job Description
    Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
    Composites fabrication & sub-assembly:
    • Fabrication of parts using wet layup and pre-impregnated composite materials
    • Knowledge of properly preparing tooling for layup (Clean, seal, release)
    • Placement and consolidation of composite materials in tooling
    • Grinding, cutting, and trimming of parts
    • Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
    • Bonding composite structures
    • Hand-finishing parts to proper fitment
    • Wet layup with multiple resin systems and fabrics
    • Locating parts and creating fixtures to blueprints and / or engineering instructions
    • Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
    Required:
    • 3+ years of experience with composites or aircraft fabrication and assembly preferred.
    • Flexible to work overtime/modified/Non-standard shifts preferred
    • 5S/FOD/Tool control programs mandatory
    • Ability to perform repairs on composite structures
    • Experienced with quality inspection points and process documentation.
    • Knowledge of resins, mixing, ratios, and paste mixes.
    Physical Requirements
    • Must be able to stand for extended periods – 8 hours min.
    • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
    • Physically able to handle items weighing up to 40lbs (unassisted).
    • Working in confined spaces
    • Working on Elevated Platforms
    Job Type: Full-time
    Salary: $16.00 to $45.00 /hour
     
    Job Location: Mojave, CA
    Rate: 16-40/hr
    Per Diem: Yes
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Specialist

    Description:
    **Prefer someone direct for this role, but will consider a contractor.**

    Required skills:
    • Configuration Management experience required
    • Experience with Airbus is a plus
    • Experience with “change boards” required
    • Experience with SmarTeam required.
    • BS degree required
    • Background utilizing DOORS is a plus
    • Combination of responsibilities/duties related to configuration of the product. This role has responsibility to ensure everyone understands processes and program goals. Training others may be periodically required to ensure compliance.
    • Ensure that milestones and deliverables are met
    • Ensure that all organizations are working together
    • Deliver product to the same objectives with the same quality standards and expectations.




    Job Description:
    Applies extensive knowledge of principles, theories, concepts and industry practices to
    plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.

    Formal Education, Training, Professional Certification and Work Experience:
    Bachelor degree in an appropriate discipline from an accredited four-year college or university and five (5) or more years related experience and/or training.



    The Structures Company is an AA/EOE.
     
    Job Number: 354
    Job Location: Tulsa, OK
    Rate: $110K **DOE**
    Duration: DIRECT/FULL-TIME POSITION
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Contract Administrator (Aerospace)

    Description:
    NEW Job Opportunity: Contract Administration Specialist’s - Hazelwood, MO
    Location: Hazelwood, MO
    Duration: 1 year plus ++++
    Rate: $ 42.00 to $ 50.00 p/hr Depending on level and exp.

    Job Description:
    Client has multiple openings for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has open positions to support either USG or DCS programs. The USG position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The DCS position would support international or commercial customers across similar platforms.

    Primary Responsibilities include:
    • RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
    • As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
    • Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
    • Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
    • Submits offers and serves as official Boeing representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
    • Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
    • This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.
    Education/experience typically acquired through advanced education (e.g. Bachelor).

    HOW TO APPLY:
    1. Email resume in MS Word Doc Format: albert.peniche@yoh.com
    2. Please include month/day of birth (NOT Year) – required for this aerospace client •
     
    Job Number: AP289158
    Job Location: Hazelwood, MO
    Rate: $ 45.00 - $ 53.00 p/hr
    Per Diem: No
    Overtime: Yes
    Duration: 1 year plus ++
    Start Date: 2 Weeks
    Input Date: 11/14/2020
    Firm Name: YOH SERVICES
    Attention: Albert Pe niche
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/791-1565
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Processing Engineer

    Description:
    Data Processing Engineer

    Edwards AFB, CA
    $80/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

    Description:
    Engineering professional to join its Flight Test Data Operations group at Edwards AFB in support of flight test of the F22 Fighter.

    Successful candidate will function as a Data Processing Engineer for Flight Test activity at the F22 Combined Test Force (CTF), Edwards Air Force Base, CA. Position is primarily tasked with supporting daily flight test data center operations by preparing and post-processing flight test data products.

    Supporting tasks include:
    * Receive, process and troubleshoot IRIG 106 formatted data products per established processes.
    * Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities.
    * Diagnosis and resolution of problems encountered in the recovery of test data.
    * Develop, test, and troubleshoot data processing algorithms for aircraft data.
    * Support IT assignments as required.

    At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

    This position is for first shift (nominally 7am - 4pm). Candidate must be willing to work extended hours, weekends, and rotations to first in support of mission goals.

    Candidate must have the communication, organization, and planning skills to handle a highly dynamic flight test environment.

    Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position an active Secret security clearance, with a current background investigation is required.

    **Must be a US Citizen. This position is located at a facility that requires special access.**
    Experience working in a Flight Test organization

    * Hardware and/or software programming experience

    * Experience working with IRIG Standard 106 including Chapter 10 (recorded data) and Chapter 9 (TMATS)

    * Experience with and/or knowledge of Teletronics Corporation (TTC) hardware and software

    * Symvionics IADS (Interactive Analysis and Display System) use and programming

    * Experience with and/or knowledge of Air Force Flight Test Center (AFFTC) regulations and operating procedures

    * Experience with and/or knowledge of working with communications protocols, Specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485

    * Excellent communication skills

    * Demonstrated ability to develop and implement process improvement initiatives
     
    Job Number: 11928
    Job Location: Edwards, CA
    Rate: 80.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Processing Engineer

    Description:
    Data Processing Engineer

    Palmdale, CA
    $90/hr
    15 month W2 contract
    First Shift, 9/80
    *MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

    Description:
    This company is looking for someone to join the historic Skunk Works™ as a flight test data processing engineer. The candidate will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale.

    The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
    The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

    Tasks include:
    * Receive, process and troubleshoot IRIG 106 formatted data products per established processes
    * Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
    * Diagnosis and resolution of problems encountered in the recovery of test data
    * Support IT assignments as required

    At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

    The applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. This position requires an active Secret security clearance.

    Must be a US Citizen. This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.

    Desired skills
    The ideal candidate possesses:
    * Experience with IT infrastructure operations, computer networking, and/or software programming concepts
    * Experience in data processing and network system administration
    * Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
    * Programming in C/C++
    * Security+ certification
    * Subject Matter Expert in data collection systems
    * Experience working with the LM application Common Data Processing
    * Experience with installation of Network Server systems for data processing
    * Experience working in flight test
    * Hardware and/or software programming experience
    * Understanding of IRIG 106
    * Experience with various instrumentation vendors hardware and software
    * Symvionics IADS (Interactive Analysis and Display System) use and programming
    * Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
    * Demonstrated ability to develop and implement process improvement initiatives
    * Excellent communication skills
    * Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)
     
    Job Number: 11924
    Job Location: Palmdale, CA
    Rate: 90.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    3. Knowledge with placard creation/installation and/or seat engineering/installation highly preferred.
    4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    7. Design Engineer will be required to liaison with the shop on engineering issues.
    8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis, and Configuration Analysis.
    9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11964
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    3. Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations.
    4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    7. Design Engineer will be required to liaison with the shop on engineering issues.
    8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis , and Configuration Analysis.
    9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 11965
    Job Location: Savannah, GA
    Rate: $55.00 - $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer ( Clearfield, Utah ) S9271212

    Description:
    Design Engineer ( Clearfield, Utah ) S9271212
    12 month Contract

    Pay Rate:$70-80/hr W2

    Active Secret Clearance Required

    Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

    Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

    Top three skills:
    Must have an active clearance with an investigation within the last 4.5 years
    BS in Engineering with a minimum of 10 years related experience in design engineering function
    Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
     
    Job Number: S9271212
    Job Location: Clearfield, UT
    Rate: Open
    Per Diem: no
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer - Solidworks

    Description:
    POSITION SUMMARY:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



    ESSENTIAL JOB FUNCTIONS:
    1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
    2. Utilizes airworthiness requirements and the project specification to create drawings.
    3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
    4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
    5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
    6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
    7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
    9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
    10. Using company procedures, applies engineering knowledge to resolve complex issues.
    11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
    12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
    2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
    3. Familiarity with the Supplemental Type Certificate (STC) process

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
    3. Ability to read, write, speak, and understand the English language.
    4. Computer Aided Drafting/Design - SolidWorks required
    5. Aviation background and electrical systems experience required.
    6. Strong knowledge of industry mechanical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Strong communication and problem-solving skills.
    9. Strong time-management and organizational skills.





    The Structures Company is an AA/EOE.
     
    Job Number: 339
    Job Location: Indianapolis, IN
    Rate: $50-57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer 5

    Description:
    Design and Analysis Engineer 5

    Location: Oklahoma City, OK
    Duration: 6+ Months

    Description:
    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


    Other job responsibilities may include:
    - Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    - Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    - Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    - Works with other to develop program test strategies.
    - Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    - Conducts program independent reviews and reports results to program leadership.
    - Provides critical support of fielded hardware and software over the entire product lifecycle.
    - Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    - Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    - Works under consultative mentorship.

    Basic Qualifications (Required Skills and Experience)
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


    Skill Code: 622-Electrical Systems Design
     
    Job Location: Oklahoma City, OK
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design/Engineer - Mechanical Interiors

    Description:
    Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
     
    Job Number: 20-149926
    Job Location: WI
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design/Engineer - Mechanical Interiors

    Description:
    Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
     
    Job Number: 20-149926
    Job Location: WI
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    E3D Installation Design - Catia V5

    Description:
    Designing electrical harnesses for equipped cabinetry and interiors furnishings for all current production Falcon aircraft. Responsible for Aft Vanity and Lavatory, Sideledge, Divan and Seat harness installations
     
    Job Number: 20-838
    Job Location: Central USA
    Per Diem: Split
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EE Technical Designer

    Description:
    EE Technical Designer 3

    Location: Tukwila, WA
    Duration: 6 Months

    Job Description:
    Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
    Come join client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

    Position Responsibilities:
    - Support the development, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
    - Using design tools prepares documentation and incorporates design changes.
    - Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
    - Supports engineering system design and functionality validation activities.
    - Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
    - Coordinates activities and products with internal partners and external suppliers.
    - Works under general direction.

    Basic Qualifications (Required Skills and Experience):
    - 5 or more years of designing or supporting electrical wire harness Installations
    - Education/experience typically acquired through advanced education (e.g. Associate) and typically 5 or more years' related work experience or an equivalent combination of education and experience

    Preferred Qualifications (Desired Skills/Experience):
    - Active security clearance is preferred
    - Client Defense Experience preferred but not required

    Skill Code:
    65L-Wiring Installation Design
     
    Job Number: 20-00039
    Job Location: Tukwila, WA
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: 1/31/2020
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Constance Whitcomb
    Address: 4620 E 53RD ST
    City, State: DAVENPORT, IA 52807
    Phone: 312/502-4795
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EWIS Design Engineer

    Description:
    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    • Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    • Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical is required
    • Knowledge of Mentor Graphics Capital software is required

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-306
    Job Location: Savannah, GA
    Rate: $58-$63/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EWIS Design Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    5. Aerospace Experience is required.
    6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.
    7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.
    8. Knowledge of Catia V5 Electrical is required.
    9. Knowledge of Mentor Graphics Capital software is required.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11909
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EWIS Harness Installation Design Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique skills:
    1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
    2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
    3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
    4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    5. Aerospace Experience is required
    6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    8. Knowledge of Catia V5 Electrical is required

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11921
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Capitol Logic & Harness XC

    Description:
    Unique Skills:
    1. Mentor Graphics Capitol Logic and Harness XC experience required.
    2. Catia V5 experience preferred.
    3. 14 CFR 25 Subpart H - EWIS based design experience required.
    4. Completions electrical system design experience preferred.
    5. Part 25 Certification experience for cabin interiors preferred.
    6. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    7. Experience with power distribution, lighting, switching, and harness routing required.
    8. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    9. Familiarity with aircraft STC procedures preferred.
    10. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
    11. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11995
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Quality Engineer

    Description:
    Unique Skills:
    1. Candidate will be performing quality checks on electrical designs in support of our client's Completions.
    2. At a minimum, the candidate will:
    a. Analyze electrical designs created in AutoCAD and Capital Harness.
    b. Clearly document quality findings to design team and collaborate on issue resolution.
    c. Analyze electrical harness routing created using CATIA V5 EHI.

    The ideal candidate will have experience in the following:
    1. General CATIA V5 experience is required.
    2. Electrical Engineering degree strongly preferred.
    3. EWIS experience strongly preferred.
    4. Aircraft interiors electrical engineering design and/or quality experience is preferred.
    5. Experience with 14 CFR Part 25, 91, and 135 certification relative to Cabin interiors is preferred.
    6. Experience with systems development, layout, logic, and wiring diagram creation is preferred.
    7. Experience with power distribution, lighting, switching, wire sizing and routing is preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11997
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    As part of the Completions Engineering Electrical Definition Team:
    - Define and create Build Lists of interior components for G500 / G600 aircraft
    - Evaluate customization requests for engineering and manufacturing feasibility
    - Analyze models to determine asset re-use or new custom engineering requirements
    - Support evaluation and determination of certification strategy of aircraft
    - Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    - CATIA V5 / SmarTeam preferred
    - Experience using CHS/EHI tools a plus

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient
     
    Job Number: 149123
    Job Location: Savannah, GA
    Rate: 70-76 per hour
    Per Diem: yes
    Overtime: possible
    Duration: L-T
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    As part of the Completions Engineering Electrical Definition Team:
    1. Define and create Build Lists of interior components for G500 / G600 aircraft
    2. Evaluate customization requests for engineering and manufacturing feasibility
    3. Analyze models to determine asset re-use or new custom engineering requirements
    4. Support evaluation and determination of certification strategy of aircraft
    5. Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    6. CATIA V5 / SmarTeam preferred
    7. Experience using CHS/EHI tools a plus

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12015
    Job Location: Savannah, GA
    Rate: $71.43 - $76.98/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
     
    Job Number: 20- 148741
    Job Location: Savannah, GA
    Per Diem: Split
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    As part of the Completions Engineering Electrical Definition Team:
    • Define and create Build Lists of interior components for aircraft
    • Evaluate customization requests for engineering and manufacturing feasibility
    • Analyze models to determine asset re-use or new custom engineering requirements
    • Support evaluation and determination of certification strategy of aircraft
    • Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    • CATIA V5 / SmarTeam preferred
    • Experience using CHS/EHI tools a plus

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-375
    Job Location: Savannah, GA
    Rate: $72-$77/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GV, GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12014
    Job Location: Savannah, GA
    Rate: $53.17 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GV, GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12016
    Job Location: Savannah, GA
    Rate: $59.52 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Location: GA
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
     
    Job Number: 20- 148741
    Job Location: Savannah, GA
    Per Diem: Split
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Preferred candidate will have:
    o Catia V5 basic navigation experience.
    o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    o EWIS Certification familiarity & experience preferred.
    o Familiarity with aircraft STC procedures preferred.
    o Experience with electrical systems test plans and reports.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-377
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Preferred candidate will have:
    o Catia V5 basic navigation experience.
    o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    o EWIS Certification familiarity & experience preferred.
    o Familiarity with aircraft STC procedures preferred.
    o Experience with electrical systems test plans and reports.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-376
    Job Location: Savannah, GA
    Rate: $55-$60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Data Processing Engineer - Clearance CA

    Description:
    167091 Job Title: Electrical Engineer / Data Processing Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2677-1
    Max Pay Rate: $90.00/hr
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
    The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

    Tasks include:
    • Receive, process and troubleshoot IRIG 106 formatted data products per established processes
    • Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
    • Diagnosis and resolution of problems encountered in the recovery of test data
    • Support IT assignments as required

    At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Desired skills
    The ideal candidate possesses:
    • Experience with IT infrastructure operations, computer networking, and/or software programming concepts
    • Experience in data processing and network system administration
    • Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
    • Programming in C/C++
    • Certification
    • Subject Matter Expert in data collection systems
    • Experience working with the application Common Data Processing
    • Experience with installation of Network Server systems for data processing
    • Experience working in flight test
    • Hardware and/or software programming experience
    • Understanding of IRIG 106
    • Experience with various instrumentation vendors hardware and software
    • Symvionics IADS (Interactive Analysis and Display System) use and programming
    • Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
    • Demonstrated ability to develop and implement process improvement initiatives
    • Excellent communication skills
    • Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

    Qty 1 position

    This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
     
    Job Number: JE-2677-1S
    Job Location: Palmdale, CA
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Instrumentation Engineer - Clearance CA

    Description:
    167083 Job Title: Electrical Engineer / Instrumentation Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2678-1
    Max Pay Rate: $100.00/hr
    Start Date: 11/22/2019
    End Date: 2/9/2021
    Position Type: Contract

    Job Summary:
    Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

    Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

    The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

    This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Basic Qualifications
    • Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
    • Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
    • Experience developing data acquisition systems for air vehicles

    Experience with the following:
    - Microsoft Office
    - Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

    Desired skills
    • Using various CAD programs such as Catia, Autocad, etc.
    • Using general test equipment such as oscilloscopes and spectrum analyzers.
    • Understanding of IRIG 106
    • Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
    • GPS and IRIG time standards
    • Video protocols and compression

    The applicant must have excellent organizational and communications skills
    • Applicant should have knowledge of Systems Engineering practices and concepts
    • Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
    • Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
    • Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

    Qty 2 positions
     
    Job Number: JE-2678-1S
    Job Location: Palmdale, CA
    Rate: 100/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Instrumentation Engineer - Clearance CA

    Description:
    167093 Job Title: Electrical Engineer / Instrumentation Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2657-1
    Max Pay Rate: $90.00/hr M
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Responsible for performing pre-flight of aircraft instrumentation.

    Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    - Analog and digital circuit design and analysis.
    - Signal conditioning, transducers, and data acquisition.
    - Ability to interpret electrical drawings.
    - Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
    - Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
    - CATIA, CCD, AutoCAD or similar design tools.
    - Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
    - Microprocessor firmware design and embedded system design
    - Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
    - Flight test instrumentation protocols and standards
    - GPS and IRIG time standards
    - Real time and post test data processing Flight Test Experience
    - Proficient communication skills

    Qty 2 positions
     
    Job Number: JE-2657-1S
    Job Location: Palmdale, CA
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Design - Completions

    Description:
    1) Electrical Harness Installation (EHI) design experience required.
    2) Catia V5 experience required.
    3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4) 14 CFR 25 Subpart H - EWIS based design experience required.
    5) Completions electrical system design experience preferred.
    6) Part 25 Certification experience for cabin interiors preferred.
    7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8) Experience with power distribution, lighting, switching, and harness routing required.
    9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10) Familiarity with aircraft STC procedures preferred.
    11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


    Education and Experience Requirements:

    1.) Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2.) Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-369
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Design Engineer

    Description:
    Unique Skills:
    1. Electrical Harness Installation (EHI) design experience required.
    2. Catia V5 experience required.
    3. Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4. 14 CFR 25 Subpart H - EWIS based design experience required.
    5. Completions electrical system design experience preferred.
    6. Part 25 Certification experience for cabin interiors preferred.
    7. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8. Experience with power distribution, lighting, switching, and harness routing required.
    9. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10. Familiarity with aircraft STC procedures preferred.
    11. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11994
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Instrumentation Design Engineer W/ Secret Clearance

    Description:
    This is a full time, 14 month contract position located in Lancaster, CA*



    We are hiring for an Electrical Engineer who will be designing, analyzing and testing military aircraft instrumentation responsible for instrumentation modification via T2 Mod process for F22’s. Daily work will consist of troubleshooting instrumentation installations utilizing electrical drawings and providing modification to electrical drawings utilizing Visio/Catia.



    Required;
    *8 years’ experience in instrumentation designing including analog/digital circuit design and analysis.
    *Strong experience in supporting fast paced flight test programs; knowledge of Signal conditioning, transducers, and data acquisition.
    *Experience using CATIA, CCD, AutoCAD or other design tools; able to read drawings.
    *knowledge of Lockheed Aero Flight Test Instrumentation processes, procedures, and tools.
    *Real time and post test data processing Flight Test Experience
    *Active Secret Clearance



    Pluses:
    *knowledge of Lockheed Aero Flight Test Instrumentation processes, procedures, and tools.
    *Familiar with electronics troubleshooting using including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, etc.
    *Microprocessor firmware design and embedded system design
    *Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
    *Flight test instrumentation protocols and standards; GPS and IRIG time standards
     
    Job Number: 038
    Job Location: Lancaster, CA
    Rate: $90.00
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Integration Engineer

    Description:
    POSITION SUMMARY:
    The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Provide engineering design and analysis of electrical systems and components.
    2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
    3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
    4. Work experience with EWIS standard design and wire separation requirements.
    5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
    6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
    7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
    9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
    10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
    11. Develops and implements engineering modifications and retrofits to completions in progress.
    12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
    13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    14. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
    2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with SolidWorks.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
    4. Aviation background and experience with electrical systems.
    5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
    6. Strong knowledge of industry electrical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
    9. Requires reasoning/analytical skills to creatively design and problem solve.
    10. Strong communication and problem-solving skills.
    11. Strong time-management and organizational skills.




    The Structures Company is an AA/EOE.
     
    Job Number: 347
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

    In your role, you will:
    • Assemble fabricated aircraft parts at floor stations.
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
    Qualifications:
    • Fine pitch soldering experience is required. (watch maker certifications)
    • 4 years experience in electronics assembly.
    • High School Diploma required.
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
     
     
    Job Number: 1810083538
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 11/14/2020
    Last Updated: 03/02/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Clearance GA

    Description:
    2884-1 Embedded S/W Engineer
    Work Location: Marietta, GA
    Status: Open

    Qty: 1
    Desired Start Date: 1/29/2020
    End Date: 1/19/2021

    Job Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

    Required
    - Experience in the use of Windows and Unix Operating Systems.
    - 4+ years experience of software development in high order languages (C++, Java and/or Ada).
    - Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

    Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
    Pay Rate: $72.00 Hourly
     
    Job Number: JE-2884-1S6
    Job Location: Marietta, GA
    Rate: 72/hr max
    Per Diem: pd split possible
    Duration: 1 year plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer

    Description:
    Embedded Software Engineer

    Marietta, GA
    $72/hr
    1 year+ W2 contract
    First Shift, 4x10
    *MUST HAVE AN ACTIVE DoD SECRET CLEARANCE*

    Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.
    Required
    - Experience in the use of Windows and Unix Operating Systems.
    - 4+ years experience of software development in high order languages (C++, Java and/or Ada).
    - Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
     
    Job Number: 12017
    Job Location: Marietta, GA
    Rate: 72.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer - Infrared and Aircraft Simulation

    Description:
    *This is a full time, 18 month contract position, located on site in Marietta, GA*


    We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft simulation software. This includes pilot-in-the-loop fighter and airlift simulations and systems integration laboratories (SIL). The particular simulators include those for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft.



    Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, debugging, verification /validation of aircraft avionics and other systems.



    Required:

    *4 years’ experience developing, integrating and testing simulation software in a high-level language (C++, Java, Ada). in a Unix or Windows environment.

    *Experience with Infrared (IR) or Electro-Optical (EO) applications

    *Active Secret Clearance, with an investigation in last 5 years.

    *Engineering Degree



    Pluses:

    *Experience in Solaris or Linux systems

    *Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation

    *Embedded RTOS development experience
     
    Job Number: 073
    Job Location: Marietta, GA
    Rate: $66.00
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F& DT Engineer

    Description:
    This position supports the development of aircraft structures as a Fatigue and Damage Tolerance analyst. Duties include performing fatigue and damage tolerance analyses for metallic parts. Methods include the use of both classical hand calculations and computer techniques to develop high strength to weight ratio structures.
    Primary Responsibilities:
    Perform durability and damage tolerance analyses to verify that structural integrity requirements have been met. Team assignments may include detail part sizing, layout maturation, trade study analysis, weight reduction efforts, certification activity, or in-service support.
    Document analyses in support of trade studies or detail drawing sign-out for airframe structure. Contact customers, suppliers, and/or subcontractors to exchange technical data and to discuss project performance.
    Additional Responsibilities:
    Position requires in-depth knowledge of classical and numerical (Finite Element) stress analysis methods.
    Provide leadership and on-the-job training for less experienced structural analysts.
    Accept broad objectives with agreed deadlines, but establish the tasks required and how they should be completed. Capable of working independently.
    Ensure application of best practices and identifies the need for enhanced processes, methods, and tools.
    Utilize tool sets at an advance level.
    Technical signature authority in assigned discipline if appropriate.
    Education / Special Qualifications:
    Bachelor of Science (BS) Degree in Engineering (Aero, Civil, Mechanical) with a strong curriculum emphasis on structural design and analysis and mechanics of materials is required. A Master's Degree in Engineering is a plus.
    Minimum 6 years total analysis experience in airframe design programs. At least 3 years of experience in F&DT or a master's degree with emphasis on fracture mechanics is desired.
    Qualified Experience / Skills / Training:
    Experience in airframe design, stress analysis, composites, MRB, FAR/JAR/CS/Part 21, Certification, CATIA, NASTRAN, PATRAN and HYPERWORKS is desired.
    Proficiency with Microsoft Office Suite (Excel, Word, & PowerPoint) required.
    Proficiency with G-Suite (Docs, Sheets, Slides) a plus.
    Communication Skills:
    Must be able to communication effectively in English (verbal and written)
    Conversational in French and/or German is a plus, but not required.
     
    Job Number: 1299425
    Job Location: Wichita, KS
    Rate: 60-75 hourly
    Per Diem: yes
    Overtime: possible
    Duration: L-T
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F/22 and F/35 Flight Test Software Engineer

    Description:
    ***Requires Active Secret Clearance to Apply***
    **15-18 Month Contract, located in Palmdale, CA**

    Our client is seeking an F-22 and an F-35 Flight Test Software Engineer to develop data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.

    Required Skills
    *Experience developing, testing, and troubleshooting data processing algorithms for aircraft data
    *Experience with hardware and software programming
    *Experience with Teletronics (TTC) hardware and software
    *Experience with IADS (Interactive Analysis and Display System) use and programming
    *Experience working with Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
    *Understanding of aeronautical telemetry applications and standards IRIG 106
    *Bachelors Degree in Electrical Engineering, Computer Engineering or Aerospace Engineering

    Desired
    *Experience with and/or knowledge of Air Force Flight Test Center (AFFTC) regulations and operating procedures
    *Masters Degree in Electrical Engineering, Computer Engineering or Aerospace Engineering
     
    Job Number: 1115
    Job Location: Edwards AFB
    Rate: DOE
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: shay
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer

    Description:
    Flight Controls Engineer

    Edwards AFB, CA
    $85/hr
    15 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*

    Description:
    Support Flight Sciences testing for the F22 Raptor. Provide on-site support for F22 flight test at Edwards AFB, CA. Monitor loads, flying quality, propulsion, utility, and subsystems. Monitor aircraft in the control room to verify safe flight test operations. Verify Instrumentation is working correctly in support of flight test missions. Collect and review flight test data. Support ground testing of various F22 components such as external stores pylon calibrations. Write documentation describing flight and ground test results. A BS degree in Engineer is required (prefer Aeronautical Engineering) with five to eight years of one of the specific loads, flying quality, propulsion, utility, and subsystems areas. The applicant must be able to attain specific program accesses for performing this job.

    - Aircraft flight test knowledge.
    - Flight Sciences background (Structures, Propulsion, Flying Qualities or Utilities & Subsystems.
    - Data analysis skills.
    - Computer skills to include MS Excel, Word, and MATLAB.
    - Familiar with Edwards AFB flight operations.
    - Familiar with Air Force Test Center processes.
    - Ability to interface with management personnel & team members.
    - Flight test experience.
     
    Job Number: 11931
    Job Location: Edwards, CA
    Rate: 85.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer - Clearance CA

    Description:
    Engineering - Flight Controls Engineer

    Work Location: Edwards AFB
    Status: Open
    Qty: 1
    Desired Start Date: 12/9/2019
    End Date: 2/26/2021

    Job Description:
    Support Flight Sciences testing for the F22 Raptor. Provide on-site support for F22 flight test at Edwards AFB, CA. Monitor loads, flying quality, propulsion, utility, and subsystems. Monitor aircraft in the control room to verify safe flight test operations. Verify Instrumentation is working correctly in support of flight test missions. Collect and review flight test data. Support ground testing of various F22 components such as external stores pylon calibrations. Write documentation describing flight and ground test results. A BS degree in Engineer is required (prefer Aeronautical Engineering) with five to eight years of one of the specific loads, flying quality, propulsion, utility, and subsystems areas. The applicant must be able to attain specific program accesses for performing this job.

    - Aircraft flight test knowledge.
    - Flight Sciences background (Structures, Propulsion, Flying Qualities or Utilities & Subsystems.
    - Data analysis skills.
    - Computer skills to include MS Excel, Word, and MATLAB.
    - Familiar with Edwards AFB flight operations.
    - Familiar with Air Force Test Center processes.
    - Ability to interface with management personnel & team members.
    - Flight test experience.

    Work Location: Palmdale, CA
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $85.00 Hourly

    Work Schedule: 9/80-A
     
    Job Number: JE-2656-1S
    Job Location: Edwards AFB, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

    Description:
    166860 Job Title: Flight Controls Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2648-1
    Max Pay Rate: $85.00/hr
    Start Date: 12/2/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

    This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
    (1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
    (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
    (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
    (4) coordinate as required with other organizations associated with test readiness.

    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.

    Desired Skills
    (F-16 experience is highly preferred / F-22 & F35 experience desired)
    Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired.
    -Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


    Qty 4 positions

    Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
    Work location is Edwards AFB
     
    Job Number: JE-2648-1S
    Job Location: Edwards AFB, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations / URGENT - Clearance MD

    Description:
    Flight Operations
    Work Location: Patuxent River, MD - RMS
    Status: Open

    Qty: 5
    Desired Start Date: 12/9/2019
    End Date: 2/26/2021

    Job Description:
    The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

    -The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

    -The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

    -The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

    -Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

    Basic Qualifications
    -Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

    Desired skills
    -Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

    -Computer programming experience.
    -MATLAB experience.
    -Proficiency with Microsoft Office suite (Word, Powerpoint,
    Excel, Outlook) and Microsoft Windows operating system.
    -Works well within a team and possesses good written and verbal communication skills.

    CNE Work Location: Fort Worth, TX
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $74.00 Hourly
     
    Job Number: LMRMS-2699-1S
    Job Location: Patuxent River, MD
    Rate: 74/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Control Engineer

    Description:
    Flight Test Control Engineer

    Edwards AFB, CA
    $85/hr
    15 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*

    Description:
    This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
    **Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

    **Must be a US Citizen. This position is located at a facility that requires special access.**

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    Must have an active/current Secret clearance.

    Desired skills
    *Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    - (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
     
    Job Number: 11932
    Job Location: Edwards, CA
    Rate: 85.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Control Engineer

    Description:
    Flight Test Control Engineer

    Edwards Air Force Base, CA
    $85/hr
    15 month W2 contract
    Swing Shift, 9/80
    *MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

    Description
    This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
    **Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

    **Must be a US Citizen. This position is located at a facility that requires special access.**

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    Must have an active/current Secret clearance.

    Desired skills
    *Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    - (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
     
    Job Number: 11852
    Job Location: Palmdale, CA
    Rate: 85.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Experience developing flight test plans for fixed-wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed-wing test aircraft
    Experience performing analysis of post-flight data to determine pass/fail

    We post all current job openings at www.hi-tecsolutions.com/jobs
     
    Job Number: 148303
    Job Location: Savannah, GA
    Rate: 70.00 hrly
    Per Diem: yes
    Overtime: yes
    Duration: L-T
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed wing test aircraft
    Experience performing analysis of post flight data to determine pass/fail
     
    Job Number: 20-148303
    Job Location: Southeast
    Rate: $70.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed wing test aircraft
    Experience performing analysis of post flight data to determine pass/fail
     
    Job Number: 20-148303
    Job Location: Southeast
    Rate: $70.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

    Unique Skills:
    • Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    • Experience executing test procedures onboard experimental fixed wing test aircraft
    • Experience performing analysis of post flight data to determine pass/fail

    Essential Functions:
    • Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
    • Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
    • Work with engineering and test pilots to define test points that are conducted on test aircraft
    • Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
    • Definition of the aircraft configuration to support the on aircraft test
    • Tracks test points and updates pass/fail/repeat status
    • Supports on aircraft ground/flight testing as required.
    • Provides the judgment on acceptable test data during or post flight
    • Processing of data following a test flight to document test results
    • Development of flight test reports to show compliance with test requirements
    • Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
    • Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
    • Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
    • Conducts flight test brief with flight ops and engineering
    • Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
    • Generates and transmits post flight test summary
    • Conducts debrief of test mission with test crew and engineering

    Education and Experience Requirements:
    • Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
     
    Job Number: 24-378
    Job Location: Savannah, GA
    Rate: $55-$70/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
    2. Experience executing test procedures onboard experimental fixed wing test aircraft.
    3. Experience performing analysis of post flight data to determine pass/fail.

    Education and Experience Requirements:
    1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
    3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
    4. Flight Test Engineer Certification may offset one year of experience requirement.

    Position Purpose:
    1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
    2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
    3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
    4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
    5. Definition of the aircraft configuration to support the on aircraft test.
    6. Tracks test points and updates pass/fail/repeat status.
    7. Supports on aircraft ground/flight testing as required.
    8. Provides the judgment on acceptable test data during or post flight.
    9. Processing of data following a test flight to document test results.
    10. Development of flight test reports to show compliance with test requirements.
    11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
    12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
    13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
    14. Conducts flight test brief with flight ops and engineering.
    15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
    16. Generates and transmits post flight test summary.
    17. Conducts debrief of test mission with test crew and engineering.

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    4. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12036
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Patuxent River, MD
    $74/hr
    15 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*

    Description:
    The Flight Test Engineer's primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

    -The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

    -The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

    -The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.


    -Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.
    **Must be a US Citizen. This position is located at a facility that requires special access and a Secret clearance to start.**

    Basic Qualifications
    -Bachelor's degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

    Desired skills
    -Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

    -Computer programming experience.
    -MATLAB experience.
    -Proficiency with Microsoft Office suite (Word, Powerpoint,
    Excel, Outlook) and Microsoft Windows operating system.
    -Works well within a team and possesses good written and verbal communication skills.
     
    Job Number: 11933
    Job Location: Patuxent River, MD
    Rate: 74.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Specialist

    Description:
    Flight Test Instrumentation Specialist

    Fort Worth, TX
    $50/hr
    15 month W2 contract
    Second Shift
    *MUST BE A U.S. CITIZEN*

    Description:
    *This position is for 2nd Shift*
    The Flight Test Instrumentation Specialist is responsible for supporting the build, install/modification, and demodification of Instrumentation measurements and supporting equipment. This position will support instrumentation leadership and represented employees. Responsibilities include a broad range of oversite, including but not limited to, metal fabrication (CNC machining and sheet metal hand forming), electrical harness fabrication, structure and electrical install on aircraft, and maintenance and removal of instrumentation measurements and equipment on aircraft. This position requires strong team work skills, administrative, communication (written and verbal) and interpersonal skills. May be required to act as supervisor during supervision absence.

    Must be a US citizen. This position is at a facility that requires special access.

    Basic Qualifications
    -Experience in ONE of the following:
    -Metal fabrication experience
    -CNC machining experience
    -Harness fabrication and routing (install)
    -Flight Line/Aircraft modification experience

    Desired skills
    -Prior specialist experience
    -Excellent communication skills
    -Ability to work with varying levels of management across multiple organizations
    -SFM, PDM, EDMS
    -Experience working in a union environment
     
    Job Number: 11934
    Job Location: Fort Worth, TX
    Rate: 50.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Operations Engineer F35

    Description:
    *This is a full time, 15 month contract position located in Patuxent River, MD*



    We are hiring for a Flight Test / Instrumentation Operations Engineer, to work on F35 Test and Verification (T&V) including mechanical/electrical installations and modifications to the FTI Airborne Data Acquisition and Camera Systems, handle post flight data, attend pre/post-flight briefings, develop/maintain instrumentation configuration control documentation and data system configuration files and manage support requirements for real-time FTI system health monitoring in a mission control room environment.



    Required:
    *Experience in flight test engineering that involves some of the following: data acquisition, telemetry, digital/analog circuits, RF applications, sensors applications.
    *Good instrumentation background.
    *Ability to travel, as needed (more info on this during the interview)

    *Active Top Secret Clearance
    *4 year degree in an engineering discipline



    Pluses:
    *F35 experience

    *Knowledge of instrumentation devices to develop, test, and troubleshoot data processing algorithms for aircraft data
    *Familiarity with bus protocols;
    *Developing, writing and executing data processing acceptance test procedures;
    *Implementation of Windows workstations on an enterprise network;
    *Knowledge of IADS; IRIG Chapter 10 recording; TMATS; GPS and IRIG time standards and receiving devices
    *Proficient computer skills and Windows10/Microsoft Office user experience.
     
    Job Number: 328
    Job Location: Patuxent River, MD
    Rate: $60-65hr
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fly-By-Wire (FBW) Control System Specialist

    Description:
    A Fly-By-Wire Control System Specialist role in Nagoya, Japan is currently available through Belcan. The Fly-By-Wire Control System Specialist will work on activities of as part of HLAS, Secondary Flight Control System Group. This will include interfacing with all other aircraft functions and engineering team members to coordinate and obtain the approval of any task assigned contributing to the aircraft "Flight Control System" Development, Qualification and Certification.
    Fly-By-Wire Control System Specialist job duties:

    * Basic work scope is to develop and finalize MRJ-200 (M90) T/C design, compliant to all applicable Requirements, under company schedule.
    * This activity includes:
    * Evaluating the current aircraft design, with respect to compliance to the Flight Controls related
    airworthiness regulations of JCAB, FAA and EASA.
    * Oversight on design solutions engineered through requirements-based management, complying
    with CFR 14 Part25, ARP4754A, DO 160, DO178b, DO254.
    * Perform requirements management activities: validation, verification.
    * Support Software verification campaigns.
    * Demonstrate compliance for all integration and development requirements and design authority;
    * Support discussions and presentation of the FBW system with the Regulatory Authorities;
    * Reporting on work status and progress through regular technical and program governance to
    upper management.
    * Execute the plan, schedule and priorities directed by IPT and upper management. Where
    deviation to plans exists, proposed alternative methods or recovery plans to secure program
    objectives.
    * Support other ATAs, IPTs and Departments (Customer Support, Flight Test, RIGS etc.) in relation
    to ATA27 dependencies to ensure they meet program milestones.
    * Responsible for technical requirements integration with applicable FBW suppliers and other
    interfacing suppliers as appropriate.
    * Provide leadership and expertise to assist in resolving the FBW performance during any rig
    testing or flight testing.
    * All tasks required to perform above activities are considered within work scope; initiating/
    reviewing related documents, technical calculation, interface discussion with the team members
    and all the other stakeholders including systems, structures, manufacturing, customer support,
    and partners.

    EDUCATION AND EXPERIENCE REQUIRED

    * BS in an Engineering discipline
    * 10 years related experience
    This position requires an estimated commitment of being in Japan for 3 years.
    The primary work location will be in Nagoya, Japan. However, engineers maybe requested to travel or relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. Travel may also be requested to system supplier sites to manage system development and certification activities.
    If you are interested in this Fly-By-Wire Control System Specialist role in Nagoya, Japan please apply via the 'apply now' link provided.

    Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers" better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


     
    Job Number: 296606
    Job Location: Aichi,
    Rate: --
    Per Diem: --
    Overtime: --
    Start Date: --
    Input Date: 11/14/2020
    Firm Name: BELCAN TECHSERVICES
    Attention: JohnMehrmann
    Address: 7820 REDSKY DR
    City, State: CINCINNATI, OH 45249
    Phone: 513/432-2995
    800 Phone: 800/945-1900
    Fax Phone: 513/489-0830
    Website: www.belcan.com

    Ground Test Project Engineer

    Description:
    PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
     
    An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
     
    The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
     
    They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
     
    They will:
    • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
    • Support and manipulate Microsoft based tools in support of project schedule and status.
    • Communicate with other program integrated product teams.
    • Compile and analyze performance reports.


    .
    The ideal candidate will have:
    • Superior business and data skills,
    • Knowledge of IMS based project management and can work in a team environment.
    • Understanding of Aerospace, Helicopter and / or development program experience
    • Knowledge of mechanical / structural design and test

     
    Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
     
     
     
    Job Number: 1910110034
    Job Location: Stratford, CT
    Duration: 6 months
    Input Date: 11/14/2020
    Last Updated: 03/02/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mike Flanery
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineering Manager

    Description:
    Required:
    • Engineering Degree
    • Industrial Engineering background
    • Either a Green Belt, or Black Belt in Lean/Six Sigma Practices
    • Experience with “cost out”, process improvement, lean processes, analytical background.
    • Must have experience managing/leading groups of 8+ Industrial Engineers.
    • Must have an aerospace background
    • Will consider someone who has lead experience from larger companies leading groups of 8 plus engineers, but would prefer someone with management experience.


    Job Description
    Summary Statement: Plans, directs and coordinates activities of an industrial engineering department in the utilization of facilities, equipment, materials and personnel to improve efficiency of operations relative to the production of components, parts, systems and subsystems of operational aircraft. Possesses extensive knowledge of department processes and manages subordinate staff in the day-to-day performance of their jobs to ensure that project and/or department milestones and goals are met and adhering to approved budgets.




    The Structures Company is an AA/EOE.
     
    Job Number: 353
    Job Location: Tulsa, OK
    Rate: $100-$130K **DOE***
    Duration: DIRECT POSITION
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Engineer

    Description:
    Instrumentation Engineer

    Edwards AFB, CA
    $90/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

    Description:
    Instrumentation Engineer for F-22 CTF at Edwards AFB, CA. Responsible for performing preflight of aircraft instrumentation. Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

    Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this position an active Top Secret security clearance, with a current background investigation, is preferred.

    SUCCESSFUL APPLICANT MUST REPORT TO WORK WITH REQUISITE DOD CLEARANCE.

    Must be a US Citizen, this position is located at a facility that requires special access. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. This position requires a Secret Clearance to start.

    - Analog and digital circuit design and analysis.
    - Signal conditioning, transducers, and data acquisition.
    - Ability to interpret electrical drawings.
    - Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
    - Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
    - CATIA, CCD, AutoCAD or similar design tools.
    - Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
    - Microprocessor firmware design and embedded system design
    - Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
    - Flight test instrumentation protocols and standards
    - GPS and IRIG time standards
    - Real time and post test data processing Flight Test Experience
    - Proficient communication skills
     
    Job Number: 11925
    Job Location: Edwards, CA
    Rate: 90.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Engineer

    Description:
    Instrumentation Engineer

    Palmdale, CA
    $100/hr
    15 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*

    Description:
    Instrumentation Engineer
    The selected candidate will be responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

    The candidate will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

    The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

    This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

    Must be a US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position, an active Secret security clearance.

    Basic Qualifications
    * Bachelor's degree in Electrical/Electronics or Computer Engineering or related discipline.
    * Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
    * Experience developing data acquisition systems for air vehicles

    Experience with the following:
    - Microsoft Office
    - Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

    Desired skills
    * Using various CAD programs such as Catia, Autocad, etc.
    * Using general test equipment such as oscilloscopes and spectrum analyzers.
    * Understanding of IRIG 106
    * Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
    * GPS and IRIG time standards
    * Video protocols and compression

    The applicant must have excellent organizational and communications skills
    * Applicant should have knowledge of Systems Engineering practices and concepts
    * Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
    * Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
    * Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus
     
    Job Number: 11930
    Job Location: Palmdale, CA
    Rate: 100.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-368
    Job Location: Savannah, GA
    Rate: $55-$58/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-367
    Job Location: Savannah, GA
    Rate: $58-$63/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Interiors Design Engineer

    Description:
    Position Summary:
    Seeking an experienced design engineer that has experience in the interior completions industry who has lead teams of modelers/interior designers on fast paced completions projects. This person does not have to have Solidworks experience.


    • Must have experience as a lead engineer
    • Must have Aircraft Interior Completions experience.
    • Must have a strong background utilizing CATIA, AutoCAD or Solidworks
    • Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
    • Must have 3D modeling experience


    The Structures Company is an AA/EOE.
     
    Job Number: 355
    Job Location: IN
    Rate: $65/Hr. **DOE**
    Per Diem: Yes
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Low Observable Engineer

    Description:
    *This is a full time, 14 month contract position located in Patuxent River, MD*



    We are hiring for a Stealth/Low Observable Engineer to anchor our program. 5 years minimum Low Observables and/or radar signature experience.



    Daily duties may entail looking into F35 defects, author engineering dispositions, assist with repairs and inspection, provide schedule, labor, and materials estimates. Interface with maintainers, engineers, and management, both at PAX River Integrated Test Force and externally, conduct LO related briefings.



    Required:
    *5 years’ experience as a Low Observables/radar signature/stealth aircraft Engineer
    *Able to read drawings; good report writing; able to take photos.
    *Background in researching defects and author engineering dispositions
    *Active Secret or Interim clearance in place to start



    Pluses:
    *Familiar with F-35 Low Observable (LO) materials suite.
    *Knowledge of F-35 JTD, PDM, JDL, LOHAS, RVR, and F-35 specs.
     
    Job Number: 142
    Job Location: Patuxent River, MD
    Rate: $65.00
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Position Description:
    In your role, you will be responsible to produce the documents for putting together assemblies, based on drawings and specifications. You will harmonize the implementation of changes and will work closely with the Engineering, Material Logistics and Methods departments in Mexico. You will be called upon to take an active part in the configuration management and support production. You are expected to participate in or manage various improvement projects.
    As our ideal candidate, you have a college degree in aerospace with a minimum of two (2) years of relevant experience. You are familiar with Bombardier Aerospace business processes, especially configuration management and Manufacturing. You must have a good analytical mind and be comfortable reading engineering drawings. You are an excellent team player. Your aircraft and design experience will be an asset.
    Requirements:
    Possibility that candidate will be required to work evening shift.
    Key Skills:
    Must have a minimum of two (2) years of relevant experience. Familiarity with Company Aerospace business processes, especially configuration management and Manufacturing is an asset. Must have a good analytical mind and be comfortable reading engineering drawings. Previous aircraft and design experience is an asset. Previous experience using Mentor Graphics software is an asset.
    Education/Degree:
    Technical College Diploma
     
    Job Number: 8975
    Job Location: (Queretaro), Mexico
    Rate: ask recruiter
    Per Diem: Yes
    Overtime: straight time
    Duration: 6 month contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: EXPLEO GROUP
    Attention: Faith
    Address: 220 W DOUGLAS AVE STE 250
    City, State: WICHITA, KS 67202
    Phone: 316/264-3778
    Website: www.expleogroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Burnsville, MN
    $36.50/hr
    1 year W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*
    **NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

    Description:
    Manages high complexity design and planning of layout for assembly and materials handling. Adaptation of machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

    Candidates will support work transfer project to India. Project scope includes baselining current processes, implementation of corrective actions, and related fixture design. Additional duties to include support of legacy product lines. Legacy lines include, aircraft wipers, video systems, and electronic sub systems.

    Desired qualifications:
    Experienced manufacturing engineer capable in process design, work instruction creation and fixture design. Candidate must have good interpersonal skills and be self-motivated. Experience in Aerospace engineering is desired, but not required. Proficiency in SAP, Team center, CREO desired
     
    Job Number: 12025
    Job Location: Burnsville, MN
    Rate: 36.50
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Manufacturing Engineer

    Description:
    CATIA, aircraft systems
     
    Job Location: Southeast
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Manufacturing Engineer

    Description:
    Aircraft experience, CATIA V5
     
    Job Location: Midwest
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - 2nd shift - Clearance TX

    Description:
    Job Title: Manufacturing Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2670-1
    Max Pay Rate: $50.00/hr
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    The Flight Test Instrumentation Specialist is responsible for supporting the build, install/modification, and demodification of Instrumentation measurements and supporting equipment. This position will support instrumentation leadership and represented employees.

    Responsibilities include a broad range of oversite, including but not limited to, metal fabrication (CNC machining and sheet metal hand forming), electrical harness fabrication, structure and electrical install on aircraft, and maintenance and removal of instrumentation measurements and equipment on aircraft. This position requires strong team work skills, administrative, communication (written and verbal) and interpersonal skills. May be required to act as supervisor during supervision absence.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    -Experience in ONE of the following:
    -Metal fabrication experience
    -CNC machining experience
    -Harness fabrication and routing (install)
    -Flight Line/Aircraft modification experience

    Desired skills
    -Prior specialist experience
    -Excellent communication skills
    -Ability to work with varying levels of management across multiple organizations
    -SFM, PDM, EDMS
    -Experience working in a union environment

    Qty 1 position
    *This position is for 2nd Shift*
     
    Job Number: JE-2670-1S
    Job Location: Fort Worth, TX
    Rate: 50/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer W/Secret Clearance 2nd shift

    Description:
    *This is a full time, 14 month position located in FT Worth, TX*



    We are hiring for a 2nd shift Flight Line Manufacturing Engineer who has a background of performing build, install/modification of aircraft. Candidate will be working with composite and metal fabrication (CNC machining and sheet metal hand forming), electrical harness fabrication, structure and electrical installation into aircraft



    Required:
    *5 years’ experience as a manufacturing engineer, preferably in Flight line modifications
    *Experience in metal fabrication and or CNC machining.
    *Familiar with Wire Harness fabrication and routing/installs.
    *Active Secret or Interim Secret to start



    Pluses:
    *Any experience with instrumentation
    *Knowledge of SFM, PDM, EDMS
    *Experience working in a union environment
     
    Job Number: 661
    Job Location: Fort Worth, TX
    Rate: $50.00
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Master Minimum Equipment List Specialist

    Description:
    We are seeking a Minimum Equipment List (MEL) Specialist with aircraft maintenance experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with aircraft operations as well as MMEL (Master Minimum Equipment List) development experience.

    Responsibilities of the MMEL Specialist

    Creation and execution of all MMEL development.
    Updating and creating MMEL justification analyses.
    Updating and creating Dispatch Deviations Guide maintenance and operational procedures.
    Coordinating MMEL and associated manuals’ contents with design and safety engineering and the customers.
    Planning, coordinating, observing MMEL validation and verification activities.
    Coordinating with aviation authorities (JCAB, FAA, and EASA) for MMEL approval throughout Flight Operation Evaluation Board review.
    Development a process of updating MMEL as well as monitoring the airline’s MEL operation, evaluating and updating the MMEL documentation process and authority approval process.
    Monitoring and supporting airline’s MEL operation after Entry Into Service.
    Updating and obtain authorities approval for future MMEL revisions.


    Requirements

    4 year engineering degree.
    Minimum 5 years of experience in Aircraft Maintenance or Operations.
    Minimum 3 years of MMEL development experience, including experience coordinating with airworthiness authorities and airlines regarding MMEL documentation.
    Knowledge of CS MMEL and FAA MMEL system (FOEB, Policy Letters, etc.).
    Airline support experience regarding MMEL/MEL.
    Excellent communication skills in English.
    Ability to travel domestically as well as internationally.
     
    Job Location: Japan
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer

    Description:
    We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

    Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

    Duties:
    • Develop and refine material and process requirements
    • Author materials and processing specifications
    • Author material/joint test plans and their associated reports
    • Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
    • Review test plans, process specifications, and other documents to ensure compliance with design requirements
    • Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

    Requirements:
    • Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
    • Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
    • Experience in authoring / revising materials and process specifications for composite materials
    • Experience in authoring test plans and reports
    • Knowledgable of materials testing and characterization methods
    • Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
    • A desire to work in a fast-paced work environment with a motivated team
    • Excellent verbal and written communication skills
    • Excellent organizational skills and problem-solving skills
    • Strong team player
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint
    • Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


    The Structures Company is an AA/EOE.
     
    Job Number: 279
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Processes Engineer

    Description:
    Summary:
    As the Materials & Processes Lead you will report to the Airframe IPT Leadership Team and be responsible for leading development of the material & processes for a business jet.

    On any given day you might:
    • Support building and lead the Materials and Processes team for the aircraft development
    • Lead development of the material and process specifications through collaboration with OEM, suppliers, and vendors to guide program in selecting appropriate materials by drawing from civil, military, and industry standards
    • Provide advice on the applications, properties, and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality, and procurement
    • Perform trade studies, write proposals, and support new business development plans

    We're looking for someone who has:
    • Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred
    • 12+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
    • 3+ years of experience leading technical resources and team
    • Strong knowledge of aerospace materials, advanced manufacturing processes, test methods and design allowable development
    • Knowledge of composite certification and structural bonding requirements for Part 25 preferred
    • In-depth and current knowledge of Part 25 regulatory requirements
    • Demonstrated success in dealing and influencing internal and external stakeholders
    • Experience in engineering support of aircraft production line activities is desirable
    • Strong decision making and communication skills
    • Excellent problem-solving skills across multi-disciplinary skill sets
    • Experience in a global environment working with customers and suppliers

    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
     
    Job Number: 42-038
    Job Location: Reno, NV
    Rate: $75-$95/hr
    Per Diem: YES
    Overtime: Possible
    Duration: 1+Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. **Knowledge with placard creation/installation and/or seat engineering/installation highly preferred** -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
     
    Job Number: 19-148601
    Job Location: GA
    Per Diem: Split
    Overtime: Possible
    Duration: Yaer Plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

    Job Description:
    - Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

    Basic Qualifications:
    - Experience with 3D parametric modeling and drafting in CATIA or similar tool
    - Experience with Teamcenter or similar PDM/PLM software tool
    - Demonstrated success working in a team-based environment to meet objectives
    - Strong communication and presentation skills, both oral and written
    - Experience with Microsoft office suite (Word, Excel, and PowerPoint)
    - BS in Mechanical Engineering from an accredited university

    Desired skills:
    - Familiarity with C-130 or other similar fixed wing or military aircraft
    - Experience working in an aerospace environment with exposure to DoD customers
    - Experience with ANSI/ASME Y14.100 or similar design and drafting standards
    - Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
    - Experience designing, or working with, sheet metal and machined components
    - Experience with creation, review, and approval of engineering change documentation
    - Experience with an engineering change process and/or configuration control process

    Education:
    - Level 2: BS+3-5 YRS or MS+0-3 YRS
     
    Job Number: 11173
    Job Location: Lexington, KY
    Rate: $50.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer / SECRET CLEARANCE/Solid-works, NX, Catia

    Description:
    Desired Qualifications:
    **Candidate must have an ACTIVE SECRET**
    •Prefer 4+ years of directly related experience
    developing 3D models and detailed drawings
    using either Solid-works or NX, or Catia and AutoCAD
    •Familiarity with aircraft systems or Simulation equipment experience.
     
    Job Number: 658574
    Job Location: mid west
    Rate: competitive
    Per Diem: yes
    Overtime: possible
    Duration: 12 month plus/contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    POSITION SUMMARY:
    Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

    • 5+ years of experience.
    • BS degree preferred
    • Must have ON THE JOB EXPERIENCE with Solidworks.
    • Preferably 5 years of experience from aircraft completions industry
    • Must have experience designing waste water systems as that carries the most importance.
    • They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
    • Must be self-sufficient and NOT require guidance.
    • It is preferred if they have experience with collaborating data in Solidworks.
    • Experience with report writing


    The Structures Company is an AA/EOE.
     
    Job Number: 340
    Job Location: IN
    Rate: $57-$65/Hr. **DOE**
    Per Diem: Yes
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer - EBU Experience Needed

    Description:
    Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



    The Structures Company is an AA/EOE.
     
    Job Number: 337
    Job Location: Tulsa, OK
    Rate: $75/Hr.
    Per Diem: Yes
    Overtime: OT - Some as needed
    Duration: 12-18 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer II

    Description:
    Position Purpose:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Unique Skills:
    • Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
    • Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
    • Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
    • Assist in developing and documenting standards for the handling and utilization of metrology equipment.
    • Create standardized inspection reports through the utilization of Metrologic software.
    • Study and optimize equipment performance for increased capacity and equipment efficiency.
    • Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
    • Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
    • Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
    • Coordinate the implementation of projects between multiple organizations.
    • Support all Safety, Sustainability and Ergonomic Initiatives.

    Education and Experience Requirements:
    • Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

    Other Requirements:
    • Extensive knowledge of metrology equipment, software and current measurement techniques.
    • Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
    • Knowledge of Lean and/or Six Sigma principles.
     
    Job Number: 24-370
    Job Location: Brunswick, GA
    Rate: $50-$55/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer II

    Description:
    Position Purpose:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Unique Skills:
    • Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
    • Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
    • Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
    • Assist in developing and documenting standards for the handling and utilization of metrology equipment.
    • Create standardized inspection reports through the utilization of Metrologic software.
    • Study and optimize equipment performance for increased capacity and equipment efficiency.
    • Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
    • Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
    • Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
    • Coordinate the implementation of projects between multiple organizations.
    • Support all Safety, Sustainability and Ergonomic Initiatives.

    Education and Experience Requirements:
    • Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

    Other Requirements:
    • Extensive knowledge of metrology equipment, software and current measurement techniques.
    • Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
    • Knowledge of Lean and/or Six Sigma principles.
     
    Job Number: 24-374
    Job Location: Brunswick, GA
    Rate: $50-$55/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer II

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    Experience with Gulfstream Engineering data preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

    Position Purpose:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

    Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

    Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
     
    Job Number: 11999
    Job Location: Brunswick, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer II

    Description:
    Location: Savannah, GA
    Rate:
    Duration: Long Term Contract
    Shift: 1st Shift
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    Experience with Gulfstream Engineering data preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

    Position Purpose:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

    Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

    Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
     
    Job Number: 11978
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Specialist

    Description:
    Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

    Key Components of position
    • Hands‐on Tooling assembly
    • Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
    • Must be able to lift 50 lbs.
    • Utilizing CAD or 3D software for inspection (one or more of the following):
    o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
    • Metrology
    • Working with laser trackers or similar positioning systems

    Professional requirements for position
    • Hands on experience in setup of large scale precision fixtures or tooling
    • Excellent Organizational Skills and problem-solving skills
    • Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
    • Strong team player
    • Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
    • Must be able to take direction well and is a strong team player.
    • Extreme attention to detail and continual pursuit of perfection.
    • Excellent listening and communication skills.
    • Ability to maintain composure in high pressure situations
    • Excellent organizational skills and problem-solving skills.
    Physical Requirements
    • Must be able to stand for extended periods – 8 hours min.
    • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
    • Physically able to handle items weighing up to 40lbs (unassisted).
    • Working in confined spaces
    • Working on Elevated Platforms

    The Structures Company is an AA/EOE.
     
    Job Number: 284
    Job Location: MoJave, CA
    Rate: $55-$70/Hr.
    Per Diem: Yes
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Modeling/Simulation Software/Software Development Engineer

    Description:
    Experience with:
    • Matlab and hopefully Simulink
    • Python and/or C++
    • Aircraft and/or Spacecraft simulation and modeling
    • Modelling of vehicle systems and subsystems (e.g. Aero, Flight Controls, Propulsion, landing gear, etc.)
    • Modeling of Avionic systems (e.g. Display and display graphics, stub or physics-based Nav and other sensor models, etc.)
    • Software development
    • Requirements development
    • Good verbal/written communication skills
     
    Job Location: Fort Worth, TX
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Tracey Hill
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Multiple Positions: Systems Engineers : St. Louis, MO

    Description:
    Systems Engineer (Level 4, 5, 6)

    Location: St. Louis City, MO
    Duration: 1 year

    Description:
    • Manager is seeking a Experience Systems Engineering Lead for the U.S. Navy Aircraft Carrier Based Autonomous MQ-25 program.
    • The successful candidate will be a self-starter with excellent communication skills, able to plan, design, schedule, and verify a balanced System Safety life-cycle solution. Candidates are expected to work at a dynamic fast pace while serving as the primary System Safety interface to defense industry customers, internal partners, and senior leadership teams.

    Position Responsibilities:
    • Candidates shall lead, coach, and develop the System Safety design team and peers for the next generation of talent.
    • Lead the development and execution of a system safety program based on MIL-STD-882E. Tasks include development and continuous improvement of the Hazard Tracking System and the System Safety Working Group Charter, System Safety Management Plan, and System Safety Program Plan.
    • Applies extensive knowledge of aircraft systems and sub-systems (e.g., airframes, propulsion, flight controls, fire protection, hydraulics, electrical, environmental, fuel, lighting, landing/arresting gear and brakes, avionics mission and vehicle management system, Com/NAV, support equipment and command and control systems).
    • Lead in the development and execution of software Level of Rigger (LOR) task development and perform software safety analysis utilizing software criticality indices per MIL-STD-882E.
    • Lead engineering meetings and program reviews, including Gate Reviews, Integrated Product Teams, Working Groups, Configuration Control and Safety Review Boards, and/or Milestone Reviews. Tasks can include safety approval or endorsement of Engineering Change Proposals, Change Notices, Notice of Escapes, Mishap Reports, and/or Requests for Deviation/Waiver.
    • Lead Safety Review Board flight determinations for Notice of Escapes, fleet impact assessments, line stock checks, and other non-conformances.
    • Assess system risks to personnel, equipment or environment. Tasks include Preliminary Hazard List, Preliminary Hazard Analysis, System Requirements Hazard Analysis, Subsystem Hazard Analysis, System Hazard Analysis, Operational and Support Hazard Analysis, Health Hazard Analysis, Functional Hazard Analysis, and Fault Tree Analysis.
    • Evaluates customer/operational needs to define system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces.
    • Leads, develops, maintains and identifies improvements in the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessments.
    • Candidates should be familiar with Earned Value Management (EVM) metrics to achieve life-cycle cost and performance expectations that satisfy contractual requirements and Boeing first time quality obligations.
    • Candidates must collaborate one on one, and in group settings such as sub-system engineering design teams, sub-tier supplier coordination events, and be comfortable presenting before executive leadership teams.

    Qualifications (Desired Skills & Experience):
    • 5 years or more of experience implementing Department of Defense system safety standards MIL STD 882E
    • Experience leading or managing projects and/or teams
    • Master's degree and course work in statistics/safety engineering
    • Bachelor's, Master's or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
    • Military experience

    Typical Education/Experience:
    • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+8 years' related work experience, Master+8 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Skill Code:
    6AL-Systems Safety
     
    Job Location: St Louis, MO
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Non-Destructive Test (NDT) Engineer - Level III

    Description:
    Seeking an aircraft non-destructive test (NDT) engineer with experience in composite materials, processes, and production manufacturing including out of autoclave processing. The engineer will develop NDT methods and maintain specifications for identification and characterization of composite defects used in evaluating damage tolerance, structural life forecasting, and maintaining structural integrity. The engineer will assist in the development and maintenance of composite defect standards for parts and joints. The engineer must be able to recommend and apply appropriate inspection methods and write clear instructions for each technique.

    Key Components
    • Develop, substantiate and maintain NDT related procedures and process standards to meet customer requirements and assure compliance with applicable regulatory requirements.
    • Interpret and apply customer, industry, national, and international standards and specifications as appropriate.
    • Need candidates who can create methods from scratch. This is the key as they are on the ground floor.
    • Ultrasound experience is a plus.
    • Level III certification is a plus.
    • Develop NDT defect standards to assist the quality team in inspection.
    • Work with Design, Stress, and Materials & Process groups to develop and define NDT acceptance criteria to meet damage tolerance requirements for composite structures and joints.
    • Develop and administer training and examinations as necessary to support qualification and certification of NDT Technicians.
    • Generate technical reports and presentations. Present findings to Engineering and Upper Level Management.
    • Evaluate and recommend innovative solutions, applications, and approaches required for meeting business objectives and assuring product integrity.
    • Establish and maintain effective working relationships. Interact appropriately with others in order to maintain a positive and productive work environment.
    • Work independently and provide technical oversight for all NDT related activities in the absence of the Principal NDT Engineer.


    Key Requirements
    Professional Requirements
    • Level III Certification in UT and at least two other methods including IR, LST, RT, PT, or ET. ASNT, NAS 410, A4A Spec 105 or equivalent certification will be considered.
    • A minimum of five years relevant experience for degreed candidates or 10 years for non-degreed candidates.
    • At least three years’ experience as a Level III with a company performing aerospace (or related) NDT.
    • Experience with materials, fabrication methods and inspection of aerospace composites.
    • Experience with technical report writing.
    • Excellent verbal and written communication skills.
    • Excellent organizational and problem-solving skills.
    • Strong team player.
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint. Experience with computer controlled NDT systems is a significant plus.
    • Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

    Minimum Educational Requirements
    B.S. degree in Engineering or related applied sciences. Each higher-level degree, i.e., Master’s Degree or Ph.D., in a related discipline may substitute for two years of experience. Relevant technical experience may also be considered in lieu of education.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 359
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Pilot

    Description:
    We are seeking an experienced pilot to fill a position for an exciting aerospace company in Nagoya, Japan. Interested candidates should have 4000 or more flight hours as well as experience flying with a Japanese Airline.

    Responsibilities of the Pilot
    Perform flight tests and flight test related work.
    Take part in creating effective training programs.
    Provide technical customer support for aviation matters when needed.

    Requirements
    Japanese Transportation Pilot license
    Effective Type 1 Aviation Physical Examination
    Aviation English Proficiency Level 4 or higher
    Air radio pilot license
    4,000 or more hours flight time.
    JET aircraft type limited, with more than 1,000 hours of PIC experience at a Japanese airline
    Limited take-off weight of 50t or more
     
    Job Location: Japan
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Andrew Bondy
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Software Engineer - Clearance FL

    Description:
    Principal Software Engineer (Job Number: 19026145)

    Number of Openings: 3

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: Oct 14, 2019

    Target End Date: Oct 9, 2020
    Requested Hourly Rate: 59.00

    Pay Rate: $59/hr

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year


    Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

    Length of contract is up to 12 months with option to hire.


    The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
    • Full Lifecycle design, implementation, and unit testing of software
    • Work with various sub teams to integrate functionality with other IPTs
    • Actively participate in code reviews
    • Develop SW products from all phases of SW life cycle.


    Basic Qualifications:

    •Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience.
    •Experience developing software / writing code in C/C++ or Ada
    •Experience with Linux


    Preferred Qualifications:

    •Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
    •Strong Problem Solving Skills
    •Experience in Software Test
    •Familiarity with Atlassian tool suite and tools like git and Confluence
    •Familiarity with Agile software development process
    •DOORS experience
    •Eclipse or other integrated development environment (IDE)
    •Knowledge of Linux systems with basic commands
    •Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
    •Experience with OpenGL
     
    Job Number: JK-1821S
    Job Location: Melbourne, FL
    Rate: 59/hr max
    Per Diem: pd split possible
    Duration: 1 year
    Start Date: Contract to Hire
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Process Engineer

    Description:
    ****MUST be a U.S. Citizen****

    Job Description:
    1. Our client in Rome, NY manufactures power transmission systems for both military and commercial aircraft utilizing manufacturing methods such as machining, welding, NDT inspection, painting, assembly, and testing.
    2. This position requires the ability to migrate legacy manufacturing work instructions from Microsoft Excel into a new digital system called Solumina.
    3. During the migration, the candidate(s) will be trained to develop an understanding of the existing manufacturing process to incorporate improvements based off known.
    4. The estimated 1000 legacy work instructions exist in excel which will require full conversion including images, set up details, data collections and hyperlinks to supporting documentation.
    5. An estimated 300 process plans are currently converted into Solumina which provide many examples and templates to reference and develop from.
    6. The use other software systems will be required such as SAP, TeamCenter and Unigraphics (NX) in an effort to enhance the level of detail while converting into the new system.
    7. The candidate(s) will be working with one full time manufacturing engineer dedicated to this project for 1:1 support and direction.
    8. This candidate must be self-motivated, thorough, provide quality instruction, and take pride in their work.
    9. Hands on work experience is a plus.

    Education:
    1. Associates Degree required.
     
    Job Number: 11959
    Job Location: Rome, NY
    Rate: $28.00 - $36.50/HR
    Per Diem: No
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Manager - Aerospace

    Description:
    We are seeking an aerospace project management expert to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of aerospace related experience including certification knowledge as well as exceptional leadership and project management skills.

    Responsibilities of the Project Manager

    Perform all Project Management duties required to finalize aircraft development and Type Certification and Entry into Service.
    Provide evaluation of current aircraft design status until Type Certification is granted by the main certification agencies.
    Preparation and maintenance of a General Schedule for all activities in the group in consistency with the Master Schedule.
    Preparation of lower level schedules and support for sub-group leads in assignment of resources.
    Continuous understanding of progress of supplier’s activities to ensure consistency with program schedules.
    Keep management and relevant members of the team informed on progress of significant activities.
    Planning and coordinating integration of design change activities.
    Understand all assigned systems contract requirements in support of suppliers.
    Provide expertise scheduled activities related to solving planning issues and concerns raised during any testing, Flight testing or otherwise.
    Manage and monitor overall project budget with support from financial controller.
    Identify, manage and follow up project risk, issues and opportunities.
    Establish and maintain proper communication with assigned IPT team, provide guidance to IPT team meet project commitments and deliverables in order to secure program schedule.

    Requirements of the Project Manager

    Minimum 10-years of experience in aerospace required.
    Strong skills and experience coordinating with other division and leading projects.
    Aircraft systems and/or project management experience.
    Excellent overall knowledge about aircraft manufacturing and certification program.
    Prior experience creating governance structure and KPI.
    Have high level communication skills, energetic and driven to complete projects.
    Proficiency with MS Project and MS Excel.
    PMP certification and cost/budget management is preferred.
    Candidates must be fluent in both written and spoken English.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Requirements Management Engineers - Aircraft - China

    Description:
    Requirements Management Engineers - Aircraft - China


    Our Aerospace Client based in China is looking for additional Engineering Support . They require Requirements Management Engineers.

    This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Good salary / remuneration for suitable skilled and qualified candidates.

    Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

    Responsibilities:

    • Responsible for Requirement Management Planning and tools.
    • As expert to support the requirement improvement, validation and verification work.
    • Participate in team decision-making and provide support and collaboration for the team.
    Skills/ Qualifications / Experience Sought:
     
    • Bachelor or above degree.
    • Rich experience in Requirement Management of civil aircraft or onboard products (at least 15 years experience in relevant fields). 
    • Proficient in requirement management and processes of civil aircraft.
    • Capable of leading the team to develop requirements on the requirement management platform and tools according to project requirements.
    • Familiar with the information architecture of interface files of large civil aircraft.
    • Familiar with the methods and techniques of aircraft interface definition and validation.
    • Proficient in IBM Rational Doors and its development language DXL, with relevant tool development experience.
    • Fluent English with good communication skills.

     
    Job Number: BH-62-1
    Job Location: Shanghai, China
    Rate: Good Package / Negotiable 1 - 3 year Fixed Term Contracts
    Per Diem: --
    Overtime: --
    Duration: 1- 3 Years
    Start Date: 12/19/2019
    Input Date: 11/14/2020
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

    Description:
    165400 Job Title: Systems Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 1475-1
    Max Pay Rate: $75.00/hr
    Start Date: 4/15/2019
    End Date: 10/31/2019
    Position Type: Contract


    Job Summary:
    Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


    Roles and Responsibilities
    Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Bachelor's or above in a Technical Engineering Discipline

    Preferred Skills
    Skills Needed:
    • Read Engineering Drawings and Parts List
    • Capture data digitally from parts lists and excel spreadsheets to form new lists
    • Conduct meetings for changes to hardware allocations, tracking and reporting
    • Project Planning, Architecture, Functional Allocations
    • MS Excel, linking and pivot tables
    Attributes
    • Good attitude about work and working with others
    • Attention to detail
    • Good communication skills
    • Team player
    • Initiative and ability to work
    • Passion for detail and getting the job done in a timely fashion
    • RF Testing experience
    • Experience with harness design and fabrication
    • Experience with hardware configuration management

    Qty 5 positions needed
    This position is located at a facility that requires special access.
    Manager will consider both 2 and 3 level candidates.
    Will accept experience in lieu of degree
    Must have Aviation/Aerospace experience
    Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
     
    Job Number: JE-1475-1S
    Job Location: Palmdale, CA
    Rate: 75/hr max
    Duration: 6 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com