Job Search Results

123 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/03/05 Friday 05:23PM Pacific Time by ContractJobHunter. )

Listings 1 - 123

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
59955 | Propulsion System Controls Engineer

Description:
Propulsion System Controls Engineer

Location: Fort Worth, TX (76118)

Job ID: #59955

12 month contract

The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements.

Position Responsibilities:

• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:

• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:

• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:

• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans



Hours:8:00am to 5:00pm



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 59955
Job Location: Fort Worth, TX
Duration: 12 month
Start Date: Jan/Feb 2021
Input Date: 01/06/2021
Last Updated: 02/09/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Mechanical Engineer

Description:
An Advanced Mechanical Engineer job in Pittsfield, MA is currently available through Belcan. In this role, you will be responsible for designing and developing in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines. To be considered for this role, you will have a Bachelor's degree in Mechanical Engineering, or a related specialize area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Mechanical Engineer Job duties:

* Gather all wire and cable construction, routing, and COORD requirements at a programmatic level.
* Define processes for design tools and design best practices to implement cabling designs.
* Define material and deliverables for the entire cable plant on a program.
* Prepare design review material to be presented both internally and externally (to the customer).
* Interface directly with other subcontractors on the program to support proving inputs and review comments to shared interfaces and data.

Qualifications:

* Fully capable with solid modeling CAD tools to create mechanical models and drawings.
* Fully proficient with cabling tools (Mentor /Capital Harness experience preferred) to create cable harness and stand-alone cable drawings.
* Fully proficient with technical standards, manufacturing/fabrication methods, and government/industry standards.
* Provide support to the Manufacturing organization during the build cycle.

If you are interested in this Advanced Mechanical Engineer position in Pittsfield, MA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 307762
Job Location: Pittsfield, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/31/2020
Last Updated: 01/22/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScoutWonsang
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Rotorcraft Flight Control Systems Engineer, Fort Worth, TX

Description:
Aerospace Rotorcraft Flight Control Systems Engineer, Fort Worth, TX
JR-020008

Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

Aerospace Rotorcraft Flight Controls Engineer

You Will:
Flight Controls engineer is a multi-skilled technical person capable of providing expertise in conceptual design, development, integration, and verification and test algorithms for the Advanced Helicopter. This position will employ the skills above to assist in progressing overall Flight Controls system conceptual design readiness for a proposal response of the Advanced Helicopter program of record. The position requires coordination across system and program boundaries as the Flight Controls IPT representative to ensure alignment of air vehicle systems. This position will also develop Flight Control Systems content for the Advanced Helicopter program of record proposal related to all aspects of Flight Control Systems development, specifically hardware, software, control strategy, and verification, as well as, manage and provide status updates on the development, schedule, and risk associated with Flight Control System content readiness.

You’ll Need:

• At least 8 years of relevant Flight Control Systems experience with a focus in any of the following: hardware, software, systems integration, or control laws.
• Previous proposal experience is preferred
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• RTCA DO-160, MIL-STD-810, RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems, and multiple data protocols
• Experience with Enovia, DOORS, and Serena Dimensions
• Development of system requirements, architectures, and schematics.
• Experience with current industry software languages and practices
• This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)

Education: Bachelor’s Degree is required. Major in Aerospace, Mechanical, Electrical, or Software Engineering or Computer Science is preferred. Related degrees with relevant experience will be considered.

Years of Experience: At least 10 years of relevant experience in aerospace industry is required. Experience in Helicopter flight controls is preferred.
Citizenship: US person

Skills & Experience
Electronic Engineering, Embedded Systems Engineering, Systems Engineering, System Software Development
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
Apply

Application Web URL Address:

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/FCS-Software-Engineer_JR-020008
 
Job Number: JR-020008
Job Location: Fort Worth, TX
Input Date: 01/11/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Engine Mechanics

Description:
STS Technical Services is hiring Aircraft Engine Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
Technicians needed for powerplant line crew
Must have an A&P (both licenses)
Must be willing to travel both domestic and abroad
Must be willing to work Overtime with short notice and possibly holidays
Must have, or be able to get, a US Passport
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35085
Job Location: Oscoda, MI
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Tyler Alda
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technicians

Description:
STS Technical Services is hiring Aircraft Structures Technicians in Nashville, Tennessee.

Position Summary:

Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

Duties & Responsibilities:
Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repairs using test equipment specified in technical manuals.
Completes work package documentation by signing/stamping off after finishing all designated operations.
Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
Provide information and documentation for engineering requests.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
Qualifications:

Education:

High School/ GED
A&P and / or structures experience a plus, or repairman’s certificate may substitute for A&P.

Experience:

Prefer at least 2 years experience.
Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge, Skills & Abilities:

Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 'Respirator Protection' regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required.
Employees will be subject to the random drug and alcohol testing under FAA regulations.
Valid Drivers License.
Must be able to work in hot/Cold – Indoor/Outdoor.
Must be able to lift up to 50 lbs unassisted.
Must be able to do work above head.
Must be able to work at heights.
Must be able to work in confined spaces.
Must be able to climb.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36258
Job Location: Nashville, TN
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Ken Perkins
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your backyard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36246
Job Location: Oscoda, MI
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Tyler Alda
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer

Description:
An Applications Engineer job in Tempe, AZ is currently available through Belcan. The Applications Engineer will assist the Sales team with technical expertise throughout the sales process. They define equipment configurations and specifications together with customers and internal resources based on process requirements. They provide strategic guidance to the product development teams within the organization on future product development.

Job Duties:
* Presents technology to prospective customers during visits, phone conversations and online meetings.
* Seeks to understand customer requirements (process capability, performance, cost of ownership, etc.) as thoroughly as possible.
* Develops equipment configurations with the customer and the sales management team.
* Validates technical equipment performance specifications (acceptance criteria) with customers.
* Conducts equipment and process demonstrations with process engineer.
* Provides technical application support to customers (remotely and onsite), sales and service staff.
* Attends trade shows and technical conferences.
* Creates technical reports and authors technical papers.
* Analyzes the scope of work for process demonstrations and contract services.
* Researches, collects and reports information on the ability and capacity of company products and competing equipment.
* Aids in the design and development of equipment and systems, and redesign of existing systems to fulfill the needs of customers.
* Responsibilities also include providing equipment functionality and capability reports to the Sales team and acting as technical liaison to the Sales team.
* Develop understanding of product line.
* Must be able to travel domestically and internationally overnight, as needed, up to 70% of the time. Must possess a valid passport.
* This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver's license and have acceptable driving privileges.

Qualifications:
* BS or BA in Mechanical Engineering or related engineering discipline and 7-7 years in a related field
* Preferable to have experience with relevant technology.
* Must be able to effectively present information to all levels within a customer organization.
* Proficiency with JMP is required.
* Experienced in the area of capital equipment for the semiconductor industry.
* Preferable to have experience in semiconductor processing for MEMS, IC, LED or Semiconductor applications.
* Project Management skills for small projects.
* Preferred to have Kepner-Tregoe Problem Solving Decision Management training.

If you are interested in the Applications Engineer job in Tempe, AZ, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 306829
Job Location: Tempe, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/16/2020
Last Updated: 01/25/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician III

Description:
An Avionics Technician III job in Centennial, CO is currently available through Belcan. In this role, you will be responsible for installing, testing, troubleshooting, and repairing our aircraft avionics and electrical system components and keeping our aircraft in airworthy condition. To be considered for this role, you will have a High school diploma or GED equivalent and at least 5 years of relevant experience. A higher level degree may substitute for experience. An active Secret U.S. Security Clearance required.

Avionics Technician III Job duties:

* Repair and maintain electronic systems involved with the operation of an aircraft
* Installing, testing, troubleshooting, and repairing our aircraft avionics and electrical system components and keeping our aircraft in airworthy condition
* Support the design and creation of aerospace and defense technologies

Qualifications:

* Strong understanding and experience with wiring and wiring repair. Ability to understand an interpret technical schematics and drawings, especially wiring
* Strong understanding and experience with wiring and wiring repair
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* An active Secret U.S. Security Clearance required

If you are interested in this Avionics Technician III job in Centennial, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308255
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/07/2021
Last Updated: 01/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians

Description:
STS Technical Services is hiring Avionics Technicians in Nashville, Tennessee.

Job Description:

Performs avionics and electrical systems maintenance according to FCC, FAA and Company Policies and Regulations. Troubleshoots, tests, repairs and installs avionics components such as aircraft communication, navigation, radar and electronic instrument systems. Operates and maintains test equipment and trade associated tools.

Duties & Responsibilities:
Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionic systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc. Fabricates wiring harnesses, installs/modifies avionic and electrical systems.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
Inspects completed work before sign off to identify any needed rework and performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping off after finishing all designated operations.
Performs installation of digital avionic equipment.
Interprets avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
Adjusts, repairs, or replaces malfunctioning components or assemblies, using hand tools and soldering iron.
Installs electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering iron.
Interprets flight test data to diagnose malfunctions and systemic performance problems.
Sets up and operates ground support and test equipment to perform functional flight test of electrical and electronic systems.
Tests components or assemblies, using circuit tester, oscilloscope, and voltmeter.
Trouble shoots, repairs, reworks, and modifies worn or defective assemblies, components or systems.
Qualifications:

Education:

High School/ GED
Current A&P or an FAA Repairman Certificate (Avionics).
Desired:FCC License.

Experience:

5 years actual and recent depot level aircraft avionics experience is required, (repair of electrical systems, flight control systems, instrumentation and wiring); proficiency with: interpretation of avionic/electrical wiring diagrams, wire identification, harness fabrication, cables, fittings, circuits and connectors
Desired:Prior experience in executive jet repair facility.

Knowledge, Skills & Abilities:

Assignments require Comprehensive Knowledge of all possible tasks and responsibilities within their Technical Area.
Troubleshooting — determining causes of operating errors and deciding what to do about it.
Installation — Installing equipment, machines, wiring, or programs to meet specifications.
Repairing — Repairing machines or systems using the needed tools.
Equipment Selection — determining the kind of tools and equipment needed to do a job.
Equipment Maintenance — performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Knowledge of machines and tools, including their uses, repairs and maintenance.
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 'Respirator Protection' regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36260
Job Location: Nashville, TN
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Ken Perkins
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD DRAFTER, Bloomington, IL

Description:
CAD DRAFTER, Bloomington, IL, JR-019689

• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defense, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

We are looking for a CAD Drafter. You will learn on the job all necessary skills required to draft and design Telecommunications wireless projects. You will learn to draft in multiple CAD platforms and navigate proprietary software systems required to complete technical telecommunication design packages that will be used for zoning, permitting, final design and construction. You will will also design fiber optic cables, above and below ground equipment cabinets, telephone poles and other underground structures and draft them in an accurate and error-free design package to be delivered to the customer. You will report directly to the Engineering Section Manager in our Erie, PA office.

Position located in the Erie, PA office. Candidate must have reliable transportation to & from office on a daily basis.

You Will:

• Create Telecommunication Engineering designs and layouts.
• Create AutoCAD drawing packages and permit drawings for wireless sites.
• Interpret engineering designs, redlines and incorporate into A&E drawing packages.
• Develop necessary templates used to create AutoCAD drawing packages.
• Work with senior designers to develop drawings, calculations and equipment applications for the telecom industry using AutoCAD.
• Organize and analyze drawings before set up and discuss project complexity and time estimates with technical and supervisory personnel.
• Provide technical support to design engineers, project managers and other technicians.
• Maintain project drawing files, drawing library, and associated records and documentation per company policies.

You'll Need:

• High School diploma
• 2+ years of experience in drafting (civil, electrical or architectural industry preferred)
• 2+ years of experience in AutoCAD (2018), MicroStation or other CAD program.
• Proficient in Microsoft Office programs.
• 1 year of experience with interpreting utility, topographic, street or profile maps is preferred.
• Reliable transportation to the office on a daily basis

Skills & Experience
auto cad, Microsoft Excel User, Telecommunications
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019689
Job Location: Bloomington, IL
Input Date: 02/15/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will take customer requirements for an aerospace fluid control component and create a viable design solution that can be carried through all phases such as design, development, testing and manufacturing. To be considered for this role, you will have a B.S. Degree in Mechanical or Industrial Engineering along with a minimum of five years of experience designing fluid control components like Valves, Regulators and Pressure Vessels.

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Design Engineer Job Responsibilities:
* Complete new projects from creation of proposals through development, qualification, and production support
* Determine feasibility of designs considering costs, time limitations, and technical factors
* Apply engineering principles to design, develop, or modify new or existing products
* Conduct analytical studies on engineering proposals to develop design for products
* Analyze test data and reports to determine if design meets functional and performance specifications
* Prepare or directs preparations of component layouts and detailed drawings
* Plans and develops experimental test programs
* Prevent or eliminate defects in new or existing products

Design Engineer Job Requirements:
* B.S. in Mechanical or Industrial Engineering or the technical equivalent
* Minimum of five years of hands-on experience designing fluid control components like Valves, Regulators and Pressure Vessels for the aerospace industry
* Experience with AutoCAD and SolidWorks software is a must
* Project engineering and communication skills
* Ability to perform in a fast paced, 'hands-on' environment
* An Advanced Degree is preferred
* Hands-on experience with software like ANSYS, MathCAD, Solid Works, Pro-E or equivalent is desired
* Understanding or Six Sigma/Lean Manufacturing techniques and methods is desired

If you are interested in this Design Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 303447
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:

An Electrical Engineer job in is currently available through Belcan. In this role, you will be responsible for research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering or other related discipline, and six or more years of relevant experience.

Electrical Engineer Requirements:

* Bachelors of Science Degree in Electrical Engineering or other related discipline.
* Ten plus years of relevant experience.
* Demonstrated knowledge of engineering principles and practices.
* Understanding of Computer Aided Engineering Tools (CAD).
* Background in the Aerospace and Defense Industry.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
* Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL).
* Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes.
* Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI).
* Experience in digital or analog circuit design and schematic capture.
* Understanding of the printed circuit board layout process and tools.
* Able to obtain and maintain a Security Clearance.
* Must be a US Citizen.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308264
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/12/2021
Last Updated: 01/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Environmental, Health and Safety Representative

Description:
Environmental, Health and Safety Representative

Job ID # 2021-12295

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 10 Years

 

What You’ll Do:

Support company efforts to ensure compliance with all EHS program expectations and applicable federal, state and local regulations, and company policies and procedures.
Support and maintain the site EHS Management System (ISO 14001 & ISO 45001) program and registrations.
Gather and analyze data, then use it to develop recommendations and educate employees on specific EHS matters.
Collect, manage and report EHS data for periodic EHS regulatory documents and metrics.
Maintain EHS management system (ISO 14001 & ISO 45001) documents, internal audits, and related processes and program elements
Support EHS risk assessments related to jobs performed by employees, and develop and recommend risk mitigation strategies
Take samples and measurements for Industrial Hygiene purposes and reporting results and recommendations
Support and assist others (managers, employees, etc.) to complete their safety and compliance responsibilities (audits, follow safety rules, etc.)
Support EHS compliance inspections and audits, enforce EHS policies and regulations, and ensure corrective actions are monitored and documented
Support waste management and disposal activities and ensure compliance with applicable RCRA and DOT requirements
Assist with completing and documenting all regulatory compliance activities through the EHS Calendar according to regulatory deadlines
Complete, document and submit required EHS reports and recordkeeping information as necessary
Maintain SHC environmental permits
Perform Contractor / Service Provider Safety Briefings (EHSI C-9)
Support the investigation of incidents including HAZMAT spills/releases, employee injuries and near-miss incidents.
Monitor closure of effective corrective / preventive actions, as assigned
Review SDS for new materials for approval for use within GDLS (EHSI I-03)
Support state and federal agencies such as State Environmental agencies, EPA (MI-EGLE, GLWA), OSHA (MIOSHA), NRC, DOT inspections and information requests
Support respirator fit tests (EHSI E-03)
Develop, deliver and support EHS / Safety Talks and campaigns
Perform other EHS-related duties, as assigned
Perform studies to monitor and assess employees' exposure to health risks, and to measure effectiveness of occupational health programs, policies and procedures
Maintain current knowledge of environmental, occupational health and safety and material transportation legislation.
Core Competencies :
Leadership / Sharing the Safety Vision
Lead by example and seeks out opportunities and techniques to further this goal.
Use persuasion to gain the support and cooperation from stakeholders, superiors, colleagues, subordinates and other parties to achieve a desired course of action consistent with the organization strategic goals and objectives.
EHS Scientific and Technical Expertise:
Seek out and improves, health & safety and regulatory knowledge.
Work with leadership to analyze and prioritize critical problems accurately and quickly; and is highly collaborative.
Work with leadership to analyze data, recognize meaningful test results, interpret results, and present the results in an appropriate way to different types of audiences.
Time Management:
Use time to their advantage, needs to be able to manage a variety of given tasks, avoid procrastination, prioritize tasks in line with regulatory, department, company deadlines and goals, this includes day-to-day tasks, multi-phase projects, and investigations, along with internal and external customer requests.
Communication:
Effective communication is a critical skill for the EHS Representative in order to communicate applicable Safety and Health regulatory requirements and company policies, procedures, work instructions, and much more.
Task Oriented:
The EHS Representative is a task driven position, This means the position is dedicated to fulfilling the tasks required of the EHS Department, For example: Timely completion of tasks that align with GDLS goals; implements reliable, effective metrics to measure outcomes; models accountability; thinks of innovative ways to spread awareness of Company and EHS Policies and best practices.
Environment
Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Most work is performed in an office environment.
While performing the duties of this job, the employee is required to walk 25% of the time, stand 25% of the time and sit 50% of the time.
In the course of on-site work and during facility visits, employee will be working around military vehicles, powered industrial trucks and hazardous waste.
The employee may occasionally be required to lift and or carry up to 25 lbs.
Employee will use computer, phone, copier and other office equipment in the course of a day.
While performing the duties of this job, the employee is occasionally required to use hand to finger, handle or feel objects, touch and use tools, reach with hands and arms, climb stairs, bend, stoop, twist, lift, reach, push, pull, grasp, balance, kneel, crouch, crawl, grasp, talk, hear, and walk during the course of employment.
Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and an ability to adjust focus
What You’ll Need:

Be familiar with and support SARA Title III reporting requirements
Be familiar with OSHA Fall Protection requirements and support the company, program compliance activities.
Be familiar with Michigan Industrial Stormwater Management requirements and certifications; Ability to achieve Stormwater Operator certificate
Position may require travel to other company CONUS locations.
Possess a high level of the following competencies in order to be successful in this position.
The EHS Representative requires the ability to communicate and share the tone for safety at the company.
Exposed to weather conditions prevalent at the time, this may include warm, hot or cold temperatures.
The noise level in the work environment is typically moderate.
Proficient knowledge of relevant laws, policies and procedures including CAA, RCRA, CWA and other related laws and regulations.
RCRA and DOT Training certificates
Strong communication skills including written, verbal, listening, and customer service skills with the ability to effectively communicate with and work well with others in order to manage projects, meetings, etc.
Strong organizational skills with a high consideration to detail and the ability to work independently as well as in a group environment.
Must be able to be entrusted with confidential information.
Familiar working with various office equipment, computers and various programs including Word, Outlook, PowerPoint, Excel, cloud-based systems, networking, and e-mail programs.
Ability to detect and solve problems effectively.
Ability to work effectively even under pressure.
Expert time management skills
Must be able to satisfy company Military Vehicle Safe Work Requirements criteria including Anthropometric Size Restrictions (ASR) for vehicle entry.
Position may require travel to other GDLS CONUS locations.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree and/or certification in an EHS related filed combined with 10 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2021-12295
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/12/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Custom Fabrication Estimator

Description:
An Estimator job in Rockwall, Texas is currently available through Belcan. This is a direct hire opportunity with one our manufacturing clients that specializes in electro-mechanical assembly, precision sheet metal fabrication, CNC machining, welding, laser cutting, and powder coating. To be considered for position, you must have previous precision sheet metal experience with a good understanding of shop floor and processes.

Estimator Job duties:

* Reviews data to determine material and labor requirements and prepares itemized lists.
* Calculate run times, provide material, equipment, and labor estimate for Sheet Metal.
* Understand the scope of work to bid after reading a SOW, project narrative, or RFP.
* Establish and maintain working relationships with vendors and sub vendors.
* Translate User Needs into Design Input Requirements to comply with regulatory requirements and best-practice standards.
* Promotes the company's capabilities and expertise when dealing directly with key decision-makers in the owner or general contracting companies.
* Participates in pre-bid meetings and bid strategy meetings when requested.

Qualifications:

* High School Diploma or equivalent.
* Five plus years' of electromechanical assembly estimating experience in a sheet metal fabrication manufacturing work environment.
* Knowledge with SolidWorks.
* Experience with an ERP System.
* Mathematical Skills: Must be able to use general business mathematics, algebra, and geometry to calculate loads and CFM requirements.

If you are interested in this Estimator position in Rockwall, Texas please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 307884
Job Location: Rockwall, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/23/2020
Last Updated: 02/22/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

F5 Engineering Ground Test / Structural Laboratory Technicians (1st Shift)

Description:
PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test / Structural Laboratory Technicians in Stratford CT.

The Structural Lab Technician should be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.
  • Must possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2010113683
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnLJQA0&URLSource=cjhunter

F5 Engineering Ground Test Laboratory Technician - 1st Shift

Description:
PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test Laboratory Technicians in Stratford CT.

The ideal candidate will be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.
  • Must possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2010121878
Job Location: Stratford, CT
Per Diem: No
Duration: 15 months
Input Date: 11/24/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PFWkQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
The Structures / Fatigue and Damage Tolerance engineer will be responsible and involved in all aspects of our products. From continued field support of legacy to on-going line support and aftermarket product enhancements. Emphasis is on ensuring that the airframe is both durable (free from cracks) and tolerant of the unexpected damage that might occur during its operational life. Responsible for ensuring the aircraft is structurally sound throughout the operating envelope

5+ Years with military and civil aircraft experience
Structures Engineering
Good with internal and external customers
BS Engineering
 
Job Location: KS
Input Date: 01/13/2021
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Resources Coordinator (TEMP)

Description:
A Human Resources Coordinator (Temp) job in Brea, California is currently available through Belcan. In this role, you will be responsible the day to day administrative support to the Human Resources Department. To be considered for this role, you will have a High School Diploma and 2 years of Human Resources experience.

Human Resources Coordinator (TEMP) Job duties:

* Maintains documentation relating to personnel activities such as, recruitment, training, performance evaluations and grievances.
* Reviews resumes, schedules interviews, administers testing of applicants and forwards results to management.
* Compiles and maintains personnel files and HRIS System entries.
* Generates various reports for human resources leadership.
* Carefully handles sensitive and confidential information/ situations and documentation.
* Communicates effectively through phone, e-mail, and correspondence while maintaining a professional manner.
* Other responsibilities as assigned.

Qualifications:

* High School Diploma
* Two years of Human Resources experience.
* Knowledge and experience in human resources processes and the ability to coordinate activities for a team.
* Ability to recognize and solve typical problems and select solutions from established options.
* Proficient within Microsoft Suite Programs.

If you are interested in this Human Resources Coordinator (TEMP) position in Brea, California please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 308386
Job Location: Brea, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/12/2021
Last Updated: 01/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer

Job ID # 2021-12296

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

 

What You’ll Do:

Analyze and design sequence of operations and workflow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.
May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations.
Conduct studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.
May assist facilities engineers in the planning and design of facilities.
Develop labor standards; perform time studies on new or existing processes; support the bidding process with new standards; provide support to manufacturing through monitoring of cost metrics, and through initiatives that result in waste elimination and process improvements.
Perform simulations, capacity planning, and produce savings packages.
Work single piece flow initiatives that reduce the hours per unit of our products.
Must have good communication skills and be able to work effectively in a team environment.
What You’ll Need:

Ability to Obtain Secret Clearance .
Good communication skills
Microsoft Excel experience is required
Desired Skills:
Experienced with Microsoft Office (PowerPoint, Access, Word, and Excel)
Experience with Statistical Analysis
Experience with Simulation software
Strong written and verbal communication skills
Knowledge of Lean manufacturing concepts and techniques
Experience in a Manufacturing environment
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Industrial Engineering.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2021-12296
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 01/12/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
Education: Bachelor's Degree mandate to have.
 
Job Number: IE_TX
Job Location: San Antonio, TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 01/08/2021
Last Updated: 01/22/2021
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Industrial Engineer / Production Planner

Description:
PDS Tech is seeking an Industrial Engineer / Production Planner for an open position in Stratford CT

The ideal candidate will be a degreed Industrial Engineer with 1-3 years of experience in Aerospace (Fixed or Rotary Wing) who can estimate, plan and analyze cost and schedule performance.

The Industrial Engineer (IE) / Production Planner will work in the Flight Operations Department and track, report and analyze progress of the Flight Program of aircraft in the Hangar.

The ideal candidate will:

  • Analyze and design sequence of operations and workflow to improve efficiencies in plant and production facilities and equipment layouts
  • Establish methods for maximum utilization of production facilities and personnel.
  • Conducts studies pertaining to cost control and cost reduction.


The ideal candidate may:

  • Establish or assist in establishing accident prevention measures


  • Manage training programs for personnel concerning all phases of production operations.
  • Assist facilities engineers in the planning and design of facilities.

A BS degree is required
 
Job Number: 2010123079
Job Location: Stratford, CT
Duration: 15 months
Input Date: 12/24/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PLg3QAG&URLSource=cjhunter

Industrial Engineer 4

Description:
Chipton-Ross is seeking a Industrial Engineer 4 for an opening in San Antonio, TX.

RESPONSIBILITIES:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 3:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 188323
Job Location: San Antonio, TX
Rate: $DOE
Duration: 12 Months
Input Date: 11/18/2020
Last Updated: 03/05/2021
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Lab Test Engineer

Description:
PDS Tech is seeking an Lab Test Engineer, in Colorado Springs, CO.

Summary:

  • Manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
  • Review schematics and customer requirements for each product to assure accurate tests are being performed for each product.
  • Create detailed testing procedures for fire and gas detection products.
  • Evaluate and understand the Bill of Materials to verify all of the components are considered during testing.
  • Prioritize tasks and testing procedures to meet company and customer goals.
  • Execute validation and regression level tests.
  • Verify functional requirement on new product designs.
  • Create effective testing procedures in order to execute 200+ tests using multitasking techniques.
  • Track progress on program testing to ensure schedule goals.
  • Document product and procedure test results in an organized manner for leadership and co-workers to review.
  • Analyze defective components and product systems.
  • Conduct failure analysis, document the cause(s), and notify the team and supervisor of results.
  • Compile and report any unusual conditions or high risk results that could affect the quality or safety of the product.
  • Follow-up with engineering teams on re-designed product or products that needed technical updates or changes resulting from non-compliant test results.
  • Review, test, and validate agency requirements for each product to ensure compliance to agency standards.
  • Collaborate with the team and share ideas on process improvement.

Qualifications:
  • 4+ years of experience working as a technician or test engineer on electronic products in an engineering lab (combination of years spent in product design are also applicable).
  • Proficient using digital and analog testing equipment such as multimeters, oscilloscopes.
  • Excellent self-task management/prioritization and documentation skills in a R&D or testing lab environment.
  • Understands how to read and interpret schematics, installation sheets, and bill of materials.
  • Demonstrated analytical and problem solving skills with little to no supervision.
  • Interpersonal skills to work with several departments, including engineering and production.
  • Excellent verbal and written communication skills.
  • Experience working on failure probability models and risk mitigation plans.
  • General understanding of engineering equipment like soldering irons, hand-held power tools.
  • Expert on Microsoft Office (especially Excel and macros in Excel).
  • Ability to stand for long periods of time and lift up to 50 lbs. with or without reasonable accommodation.
  • Must be authorized to work in the U.S.A. without restrictions.

Preferred:

  • Experience with a Surface Mount Technology (SMT) a plus.
  • Knowledge of Engineering Graphical Packages.
  • Worked in the fire and gas industry with knowledge of regulatory standards such as UL268/217/521/EN54.
  • Expertise in Minitab, and/ Or LabVIEW.
  • Past experience with product design.

Educations:

  • Bachelors


  • Associate’s Degree in electrical technology, electrical test technician, or related field with 6+ years of experience. 2+ in an electrical lab test environment with remainder in product design.
  • Bachelor’s Degree in electronics engineering technology, engineering technology, or related field is preferred 2+ years of experience in an electrical lab test environment or product design.

 
Job Number: 2010111048
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fgGKQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Line Maintenance Mechanics

Description:
STS Technical Services is hiring Line Maintenance Mechanics in Punta Gorda, Florida.

Duties & Responsibilities:
Technicians working on aircraft, components or related parts of aircraft are responsible to perform work outlined on applicable work forms in accordance with airlines policies and procedures, manufacturer’s manuals and FAA requirements
Overhaul, maintenance, and repair of airframe components, power plants, aircraft communication, navigation equipment, and associated components in accordance with airlines manuals, manufacturer’s manuals, bulletins, and orders
Ensure that the appropriate tag is attached to all parts removed from an aircraft in accordance with Airlines policy
The Technician, in performing his or her duties is required to be constantly alert for defective, worn or failed parts as well as safe working conditions
Proper execution of an Airworthiness Release
Responsible to sign for the accomplishment of work on applicable work forms and records
A Technician, when qualified, may be required to perform the duties of Inspector in accordance with the Inspector job classification as described in the manual
Responsible to keep the work area in a clean, safe and orderly manner
Will be assigned to such housekeeping duties as policing his or her work and/or repair area as well as maintenance of company property
Process all necessary paperwork as mandated by regulation
Other duties as assigned
Qualifications:
Combination of Education and Experience will be considered
Must be authorized to work in the US as defined by the Immigration Act of 1986
Must pass a Criminal Background Check
Education: High School Diploma/GED
Valid Airframe & Powerplant Certification (A&P)
Minimum two (2) years of experience in aircraft maintenance for Part 121 environments
Candidates MUST have line maintenance experience on heavy aircraft; Airbus HIGHLY preferred
Must have a valid Driver’s License and clean driving record
Sponsorship is not available for this role
Preferred Requirements
Effective Communication skills, both verbal and written
Proficiency with Microsoft Office Word and Outlook email
Airbus experience and Airbus GEN FAMs
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36061
Job Location: Punta Gorda, FL
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Dominique Flynn
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Linux Systems Administrator

Description:
A Linux Systems Administrator job in Ft. Belvoir, VA is currently available through Belcan. In this role, you will be responsible for overseeing the daily operations and administration of the IT server infrastructure. You will also perform a wide variety of duties which include, but are not limited to, analysis, installation, modification, documentation, maintenance, problem diagnosis, and repair of all server technology hardware and software. To be considered for this role, you will have a Bachelor's degree in a specialized area, plus a minimum of 5 years of relevant experience. A current active Department of Defense TS/SCI security clearance is required at the time of hire.

Linux Systems Administrator Job duties:

* Provides hardware and software technical guidance to core IT administrators and remote sites.
* Red Hat LINUX command level administration.
* Trusted Network Environment (TNE) Pit Bull command level administration.
* Create and resolve helpdesk action items.
* Manage cross domain enterprise level solutions.

Qualifications:

* 8+ Years of LINUX Administrator experience supporting a high user base (1000+ users).
* Red Hat Enterprise Linux 6.x and 7.x. experience is a plus.
* Technically fluent in the design and use of multiple Red Hat Enterprise Virtualization, VMware, vSphere, vCenter, ESXi, Microsoft Hyper-V in a distributed environment.
* Proficiency in one or more scripting languages (bash, Perl, Python).

If you are interested in this Linux Systems Administrator job in Ft. Belvoir, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 307410
Job Location: Fort Belvoir, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/16/2020
Last Updated: 01/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Linux Systems Engineer

Description:
A Linux Systems Engineer job in Chantilly, VA is currently available through Belcan. In this role, you will be responsible for the design, testing, deployment, maintenance, operation, and evolution of the systems directly supporting the insider threat detection program of a large government customer in the United States Intelligence Community (USIC). To be considered for this role, you will have a Bachelor's degree in systems engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience. Agile experience preferred. A TS/SCI security clearance with the ability to obtain a Polygraph is required at time of hire.

Linux Systems Engineer Job Duties:

*Red Hat Enterprise Linux 6/7 experience
*Experience deploying, operating, monitoring, patching, troubleshooting Linux Hosts
*NFS, SAMBA, AD/LDAP integration, Web Servers, Tomcat, LVM, YUM, and Linux security hardening
*Able to install Linux servers, troubleshoot hardware/software installation and basic networking issues
*Basic familiarity with BASH Scripting, kickstart deployments
*Basic familiarity with Red Hat Satellite Server technologies
*Basic familiarity with configuring Storage Area Network connectivity over Fiber Channel

Qualifications:

*Familiarity with Windows systems, VMWare, Hadoop, and Storage Area Networks, Big Data Analytical environments
*Strong verbal and written communication skills
*Ability to work independently with little supervision
*Demonstrated ability to quickly learn, retain, and apply good interpersonal skills, and perform effectively under time pressure

If you are interested in this Linux Systems Engineer job in Chantilly, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 307907
Job Location: Chantilly, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/16/2020
Last Updated: 01/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Loads & Dynamics Engineer 3 & 4

Description:
Job Description:
  • Support loads and/or structural dynamics assessments for various production and developmental aircraft and weapons products at the St Louis and surrounding sites.They will be assigned to teams that design, analyze, and test products to assess the impact of launch, flight and landing environments / maneuvers on vehicle structural response and to predict structural loading and stiffness requirements for all parts and sub-systems.

Required:
  • Demonstrated experience in aerodynamics, structural Analysis, structural dynamics, or stability and control.
  • Experience in Modelling & Simulation and Tools & Process development.
  • Demonstrated problem-solving skills.
  • Possess interpersonal communication (written & verbal) skills in a team oriented environment.
  • Ability to interact professionally with customer, supplier, field & production representatives.
  • Requires Bachelor's degree in an engineering from an accredited course of study - Aerospace, Mechanical or Civil Engineering
  • Some positions require the ability to obtain a US Security clearance, which requires US Citizen; some require US person for ITAR purposes.  


 
 
Job Number: 2010110794
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 12/01/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBdQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Operators

Description:
STS Technical Services is hiring Logistics Operators in Nashville, Tennessee.

Job Summary:

Performs a combination of warehouse, shipping and/or receiving tasks, as well as tracks company inventory.

Job Duties:
Perform basic tasks in regards to the receiving process
Receive inter-company PO’s
Perform the Volume and Manifest transactions
Research information pertaining to incoming shipments
Put away of parts to stock
Perform basic tasks in regards to the shipping process
Arrange delivery of parts offsite or customer pick up.
Generate shipping documentation, including AWB (airway bill), invoice, SLI (Shippers Letters of Instructions) and other;
Manual shipments
Perform “Skip Lot” and UOM conversions
Domestic and International shipping
Perform basic tasks in warehouse organization and management
Analyze basic material movements to locate parts, serial number, and quantity change.
Perform stock transfers and labeling, as well as parts packing and repacking when needed;
Perform cycle counts and recounts
Return of stock material re-certified/repaired
May be required to handle shipping and receiving of hazardous material.
Handles emergencies (such as no SAP, parts expediting, panic ticket system)
May be required to handle hazardous material documentation, and international paperwork
Suggests improvements on activities, processes and tasks
Qualifications:
Generally 1-3 years of experience in area of responsibility
Experience in warehouse or manufacturing environment or equivalent combination of education and experience preferred
High School/ GED required
Assignments require basic knowledge of a technical or functional area
Rapid learning and application of new information and concepts within the functional area takes place
Ability to multitask, multi-functional, and a team player
Forklift certified and ability to operate machinery and power-tools
Knowledge of shipping and receiving functions
Knowledge of inventory systems and methods
User knowledge of Excel, and Microsoft Word
Able to navigate through SAP
Valid Driver License is required
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35803
Job Location: Nashville, TN
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jeffrey Blau
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Manufacturing Engineer II

Description:
A Manufacturing Engineer II job in Louisville, CO is currently available through Belcan. In this role, you will be responsible reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. To be considered for this role, you will have a Bachelor's of Science degree in related discipline and typically 3 or more years of relevant experience.

Manufacturing Engineer II Job duties:

* Consultation with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible
* Reviewing engineering designs for productivity and the development of tooling and fixtures, work instructions, production process and procedures
* Involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle

Qualifications:

* Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
* Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes
* Experience with Computer Aided Engineering tools
* Experience with new product introduction and transition to production

If you are interested in this Manufacturing Engineer II job in Louisville, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308340
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2021
Last Updated: 03/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScoutWonsang
City, State: West Region
Email: swonsang@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=308340&job_number=308340

Material Handler

Description:
PDS Tech, Inc. is seeking a Material Handler in Portland, OR.

Overview:
The position of Material Handler is fast paced and requires the worker to retrieve and deliver products correctly. The individual filling this role will work closely with co-workers and supervisors ensuring that all parts are counted correctly and are housed in appropriate locations. Strong communication skills are essential, as well as basic computer knowledge. The Material Handler must be able to develop and maintain strong working relationships. Attendance and punctuality are essential.


Responsibilities:
  • General warehouse operations, load and unload trucks, shipping and receiving, movement of material, package tracking, dock labor, and transportation / distribution.
  • Identify various assembly components by part number.
  • Pick parts for restocking in different warehouse locations.
  • Work in a time efficient manner and at a productive pace without direct supervision.
  • Use computer to log in warehouse movements and part receiving.
  • Complete picking orders accurately and efficiently in multiple warehouses.
  • Take direction from supervisor.

Qualifications:
  • High School diploma or GED.
  • Valid Driver’s license.
  • Industrial forklift certification (preferred)
  • Knowledge of basic warehouse and receiving processes.
  • Experience entering inventory transactions in an MRP system
  • Produce quality work at a fast pace, standing on feet all day.
  • Self-motivated with ability to work independently and proficiently.
  • Detail oriented, organized and able to handle a high volume of product safely and efficiently.
  • Professional demeanor with co-workers, suppliers and customers if necessary.
  • Clearly read, write and comprehend English.
  • Use a hand truck and pallet jack.
  • Good written and verbal skills.


Physical Requirements:

  • Lifting and carrying 30 – 40 pounds; sometimes up to 50 pounds
    Frequent bending, kneeling, reaching, stooping, squatting, pushing; standing for long periods of time; able to travel across a variety of surfaces (stairs, ramps, uneven terrain).


     

 
Job Number: 2010123163
Job Location: Portland, OR
Duration: 24 months
Input Date: 01/13/2021
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Melissa Cuellar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PMI3QAO&URLSource=cjhunter

Mechanical Systems Design & Analyst Engineer 4 Top Secret

Description:

PDS Tech, Inc. is seeking a Mechanical  Systems  Design & Analyst Engineer 4 Top Secret in El Segundo, CA
Description

  • Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design.
  • Leads activities to validate and verify mechanical and fluid systems requirements.
  • Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation.
  • Performs and documents analyses.
  • Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
  • Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design.
  • Supports proposal preparation and new business development efforts.
  • Trains and coaches others.
  • Works under minimal direction.
  • The Lead Mechanical Engineer is responsible for ensuring a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering.

Primary Responsibilities
*Develop and verify space vehicle mechanical design.
*Analyze and verify mechanical performance of hardware components a vehicle.
*Perform detailed system design and verification activities.
*Support system level integration and validation.
*Analyze system level performance.
*Perform analyses and trades in support of a rapid prototype system.
*Manage performance of critical suppliers to ensure subsystem compliance and delivery.


Education
  • Bachelors of Science degree in Aerospace, Civil or Mechanical Engineering. *9 years or more of experience in aircraft or spacecraft mechanical design. *3 years or more of experience in supplier technical evaluation and technical performance management.


Basic Qualifications

  • This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design.
  • Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment.
  • This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our teams capabilities.


Preferred Qualifications
*Experience leading an integrated product multi-disciplinary team
*Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
*Experience integrating design at spacecraft level
*Experience working with spacecraft mechanical design
*Experience in development, build and test of small and medium-sized space vehicles
*Experience in dynamic rapid prototyping environment
*Experience working on proprietary programs with a variety of Government entities in a classified environment
*SSBI (Single Scope Background Investigation) highly desired

 
Job Number: 2010119880
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P9fuQAC&URLSource=cjhunter

Mechanical System Design & Analysis Engineer 4

Description:
Chipton-Ross is seeking a Mechanical System Design & Analysis Engineer 4 located in El Segundo, CA.

RESPONSIBILITIES:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others. Works under minimal direction.

The Lead Mechanical Engineer is responsible for ensuring a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering. This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design. Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment. This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our teams capabilities.

ADDITIONAL RESPONSIBILITIES:
Develop and verify space vehicle mechanical design.
Analyze and verify mechanical performance of hardware components a vehicle.
Perform detailed system design and verification activities.
Support system level integration and validation.
Analyze system level performance.
Perform analyses and trades in support of a rapid prototype system.
Manage performance of critical suppliers to ensure subsystem compliance and delivery.

REQUIRED EXPERIENCE:
Bachelors of Science degree in Aerospace, Civil or Mechanical Engineering.
9 years or more of experience in aircraft or spacecraft mechanical design.
3 years or more of experience in supplier technical evaluation and technical performance management.

ADDITIONAL EXPERIENCE:
Experience leading an integrated product multi-disciplinary team
Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
Experience integrating design at spacecraft level
Experience working with spacecraft mechanical design
Experience in development, build and test of small and medium-sized space vehicles
Experience in dynamic rapid prototyping environment
Experience working on proprietary programs with a variety of Government entities in a classified environment

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience).

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

TRAVEL: YES
Frequent travel to Kent, WA may be required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 187761
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanics

Description:
STS Technical Services is hiring Mechanics in Oshkosh, Wisconsin.

Job Summary:

STS Technical Services is actively seeking candidates for a Mechanic role with our Fortune 500 Client! In this role, you’ll assist in the diagnoses of vehicle malfunctions, perform preventive maintenance and repair various types of heavy military transit and support vehicles with the assistance of a skilled mechanic, either in the field or at the operations garage.

Your duties would also include basic vehicle repair, basic paint and body repair and basic electric/electronic diagnosis and repair under supervision. You’ll assist skilled mechanics in the work assigned by the Maintenance Supervisor, and you’ll report to the Maintenance Supervisor on duty.

Daily Duties:
Works toward proficiency in the diagnosis and repair of all heavy wheeled vehicles
Works to become proficient in the removal and replacement of vehicle components
Works to develop accurate diagnosis skills and effective repair and/or replacement of component techniques necessary for the proper functioning of assigned equipment
Works to learn and performs preventive maintenance inspections
Works to develop skills necessary to perform timely and effective repair of any problems identified during preventive maintenance inspections
Repairing and adjusting torsion arms, air bags, and all other components of suspension system
Testing, repairing and/or replacing components of electrical and lighting systems.
Training and/or Education:
High school diploma/GED required
Must have 2 – 5 years heavy equipment maintenance experience or related
Why Should You Apply?
Work Schedule – Mon- Thurs. 6:30am-4:30pm Fridays 6:30am-10:30am.
10 annual paid holidays
Paid vacation after 6 months
Work in a brand new temperature controlled facility
Comprehensive medical, dental and vision benefits offered
Top compensation for the area
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36317
Job Location: Oshkosh, WI
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Tammer Fadel
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

NDT Technician Level 1

Description:
PDS Tech is looking for NDT I Technicians for direct hire opportunities in Hollister, CA.  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849.  Pay varies depending on experience and NDT level.  
 

  • These roles may support the 2nd Shift with differential pay.

  • Performs all tasks associated with industrial radiography to include setting up the radiograph exposures and processing the radiograph, reading and interpreting radiographs; and developing techniques and procedures regarding such; is cognizant of all safety aspects of radiography. 
  • Ensure that the procedures and specifications are met prior to, during and after x-ray examination.
  • Non-destructive testing.
  • Conduct tests, interpret and evaluate for acceptance or rejection and document.
  • Provide necessary guidance and /or supervision to trainees, Level I and Level II techs in the technique in which they are certified.
  • Be familiar with codes, standards, and other contractual documents that control the method as utilized by the employer. 
  • Develop written instructions for radiography from approved general procedures. 
  • X-ray testing-exposure and interpretation of film.
  • Training of lesser experienced techs.
  • Preparation and approval of techniques and reports.
  • Calibration and maintenance of equipment.
  • Calibration monitoring.
  • Interface with engineering, production and customers.

  • High school or equivalent.
  • 80 hours formal training to NAS 410 or ASNT as a Level III radiographer.
  • 1600 hours experience in radiography.
  • Basic computer skills required.
  • Ability to obtain a certificate in Hazardous Material/Waste and Transportation.
  • Ability to obtain a DOD security clearance is preferred.
  • Ability to lift 50 pounds.
  • Excellent verbal and written communication skills.

 
Job Number: 2010117519
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P2TGQA0&URLSource=cjhunter

Principal Software Engineer

Description:
A Principal Software Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for further advancing the cutting-edge technology that supports some of our nation's core defense/intelligence services and systems. To be considered for this role, Bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience; agile experience preferred.

Principal Software Engineer Job duties:

* Perform software requirements analysis, participate in research, design, develop and test software and tools, to include development of new work products or enhancing existing applications
* Apply the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of technical engineering products
* Provide leadership to cross functional software development teams and lead small technical proposals and contributes to medium sized proposals
* Perform technical planning, verification and validation of others work, cost and risk analysis, and supportability and effectiveness analyses for total systems
* Participate in internal reviews of software components and systems

Qualifications:

* Proficient in one of the following: Java, C++, C, or JavaScript (using object oriented techniques) and web Services knowledge such as HTML, CSS, JavaScript, React, and Redux
* Strong leadership skills suitable for recruiting, leading and managing teams of engineers to solve challenging problems
* Strong fundamentals in data structures and algorithms along with solid object oriented programming and software design skills
* Deep exposure to Unix/Linux systems as well as Windows

If you are interested in this Principal Software Engineer job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 307917
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2020
Last Updated: 03/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
City, State: West Region
Email: dhart@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=307917&job_number=307917

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Technicians

Description:
STS Technical Services is hiring Production Technicians in Menomonee Falls, Wisconsin.

Responsibilities:
Work on the assembly line doing a variety of tasks to support the assembly of engines and transmissions.
Provide support in our client’s machining operation to include loading and unloading of parts, quality inspection, and other tasks within a CNC environment.
Qualifications:
Must have High School Diploma, OR GED, OR one-year work experience -OR- a Manufacturing Skills Standard Certification (MSSC).
Must be able to perform in a high-speed manufacturing environment while standing for long periods.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35555
Job Location: Menomonee Falls, WI
Input Date: 01/07/2021
Last Updated: 02/01/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jeffrey Blau
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Propulsion Controls Engineer

Description:
Responsibilities:
• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:
• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:
• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:
• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

To be considered and complete submittal to client, please e-mail me the following:

1 Why are you looking for work?
2 Include an up to date resume
3 W-2 Hourly Rate request (Any benefit cost should be factored)
4 Day and month of birth for submittal (signature code for system).
5 Four Digits (unique identifier)
6 Your Availability upon offer
 
Job Number: BTX8912
Job Location: FT Worth, TX
Rate: 55-70hr.
Per Diem: offered
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 01/05/2021
Last Updated: 03/05/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Control Engineer

Description:
804 Technology is currently looking for Propulsions Systems Control Engineer for a long term contract job opportunity located in Fort Worth TX. The complete job description and my contact information are listed below. If you are interested please respond be sending me your resume and your availability.

Salary is based on experience and Per Diem is available to those that qualify.
Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description
The Future Long-Range Assault Aircraft (FLRAA) Future Vertical Lift (FVL) Program has an opportunity available for a Propulsion System Controls Engineer. The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements.

Position Responsibilities:
• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:
• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:
• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:
• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
 
Job Number: Propulsion804
Job Location: Fort Worth, TX
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 01/06/2021
Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Systems Controls Engineer

Description:
The Propulsion System Controls Engineer will be responsible for the design, integration and qualification of a full authority digital engine control systems meeting program and customer requirements. This is for an entirely new aircraft design and function.

Position Responsibilities:

• The Propulsion System Controls Engineer will be responsible for:
• Providing technical direction for propulsion system suppliers
• Developing system requirements, architectures, interfaces, performance specifications, plans/procedures, and schematics
• Supporting component, systems integration lab and flight test activities
• Coordinating with other integrated product teams, such as Integrated Vehicle Health Management, Avionics and Flight Controls, to define system interfaces and capabilities

Education Requirements:

• Bachelor of Science or Engineering Degree is required. Major in Mechanical Engineering or Aerospace Engineering is preferred.

Position Requirements:

• Minimum of 10 years of relevant experience is required
• Experience integrating engine control systems with aircraft avionics and flight control systems
• Must be a proven self-starter requiring minimal supervision, with excellent written and oral communication skills, and PC skills.
• Experience with supplier management is preferred
• Experience mentoring engineers is preferred

Familiarity with the following is preferred:

• System engineering and configuration management processes. Experience with Model Based Systems Engineering and SysML preferred
• Experience with the product development phase
• Cyber security applied to airborne systems
• System Architectures, such as Modular Open System Architecture, Open Architecture and Integrated Modular Avionics
• FAA, CFRs, Civil Certification and Military Qualification of software and airborne electronics hardware
• Generation of System Safety Assessments, Failure Hazard Analysis, Qualification/Certification plans and Test plans
 
Job Number: 11617740
Job Location: Fort Worth, TX
Rate: $75.00
Per Diem: Possible
Overtime: Yes
Duration: One Year May Be Extended
Start Date: ASAP
Input Date: 01/05/2021
Last Updated: 01/11/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

QUALITY CONTROL INSPECTOR

Description:
PDS Tech, Inc. is seeking Quality Control Inspector in in Wichita, KS.

Summary:
  • I Responsibilities: 1. Inspect, identify, repair, and data entry on the leak points in valves and hydraulic components using hydraulic tester
  • 2. Should be able to use the hydraulic tester and helium sniffer effectively after the training



    3. Effectively use signal detectors to identify leak points in hydraulic components



    4. Should be able to work in a fast-paced environment



    5. Effectively communicate defects back to operators/team leads



    6. Complete tasks by following work instructions, process sheets, check sheets, photos, and carrying out assignments given by Supervisor in an efficient manner



    7. Responsible for helping to maintain good housekeeping practices in accordance with company requirements



    8. Rotate between three consecutive work stations to compete various assembly tasks



    9. Perform all tasks within safety guidelines.



    10. Contribute to the continuous improvement process.



    11. Perform other duties as assigned by lead person or department team leader

Qualifications:

1. Good understanding on the nomenclature and function of valves and hydraulic components used in skid steers

2. Hands on experience in assembly

3. Knowledge in WCM principles

4. High School Diploma or GED

5. 2+ years of experience working within a manufacturing or industrial environment with at least 3 months in production setting

6. Ability to work with computers and software systems

7. Ability to read, write, and comprehend simple instructions, short correspondence, and memos

8. Must be able to lift up to 50 pounds

9. Ability to perform each essential duty and physical requirements satisfactorily

10. Familiar with database front end usage is a plus

11. Previous experience with signal detectors is a plus
 
Job Number: 2010122832
Job Location: Wichita, KS
Duration: 6 months
Input Date: 12/15/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PKEXQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
A Quality Assurance Engineer II job in Louisville, CO is currently available through Belcan. In this role, you will be responsible ensuring all quality standards are met for our products and production equipment. To be considered for this role, you will have a Bachelor's degree in a related Engineering field and at least 3 years of relevant experience.

Quality Assurance Engineer II Job duties:

* Designing and testing our processes, mechanisms and equipment and developing standardized quality acceptance criteria
* Ensure all quality standards are met for our products and production equipment
* Technical responsibilities during planning, organizing, and conducting our projects involves the design and development of new evaluation and control processes utilizing statistical analysis and other control/risk mitigation techniques

Qualifications:

* Knowledge of Quality System requirements and contract quality requirements.
* Experience in manufacturing and inspection
* Preferred Experience in the aerospace and defense industry
* Ability to read and interpret technical drawings and schematics, parts lists, specifications, instructions and test procedures
* Knowledge of SO9001, AS9001 standards

If you are interested in this Quality Assurance Engineer II job in Louisville, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308005
Job Location: Broomfield, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/19/2020
Last Updated: 01/26/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Quality Manager

Description:
Duties:
Perform duties required to establish product standards for the company: responsible for developing and administering the company quality control programs, including the Quality Management system; ensure that customers receive prompt replies to their quality concerns; supervise and direct activities of QC staff and machine shop inspection personnel; maintains suite of metrics to show trends and opportunities for improvement; perform related activities; perform other duties as directed. Overall responsibility for development, administration and oversight for company. Ensures the Company meets its objectives while maintaining compliance with (1) operational regulatory authorities including OSHA, Environmental and other Federal and State Governments.

Basic Skills:

  • ISO
  • NCR’s
  • Document Control
  • Supplier Development
  • Address supplier quality issues and risks; establish and maintain a formal feedback system to capture, communicate and resolve quality issues; lead PPAP, APQP and Sample Approval Process to assure timely and appropriate quality results for new products; work with Purchasing Department personnel to continually improve supplier performance; visit suppliers as needed.

Responsibilities:
  • This position supervises up to 7-8 direct reports.
  • Responsible for Environmental, Health and Safety management and policy commitments as prescribed for this role in company’s care.
  • Responsible for developing and administering the company Quality Management System.
  • Direct and coordinate the overall quality specifications and standards for raw materials, processes and finished products.
  • Develop Quality Control Plan or process control procedures that will ensure production of finished products which meet quality specifications and standards.
  • Contact customers and suppliers to confer on specific quality problems; ensure that established quality control procedures and policies are coordinated throughout the organization; ensure compliance with government regulations.
  • Supervise and direct activities of QC staff and machine shop inspection personnel provide the environment, necessary training and assistance to each employee supervised to permit growth and development.
  • Organize and/or facilitate teams to attack specific quality issues in true root cause problem solving fashion; establish and lead a customer complaint team that addresses corrective actions relative to customer complaints and concerns associated with, but not limited to, product quality and packaging errors; visit customers as needed.
  • Address supplier quality issues and risks; establish and maintain a formal feedback system to capture, communicate and resolve quality issues; lead PPAP, APQP and Sample Approval Process to assure timely and appropriate quality results for new products; work with Purchasing Department personnel to continually improve supplier performance; visit suppliers as needed.
  • Assure a safe workplace through employee involvement, risk reduction and incident follow up to root cause elimination.
  • Develop the quality strategy aligned to the annual business operating plan, involving the team to gain ownership in the expectations; then be accountable for results.
  • Develops initiates, maintains, and revises policies and procedures for the general operation of the Company Compliance Program and its related activities to prevent illegal, unethical, or improper conduct.
  • Collaborates with other departments (e.g., Finance, Human Resources, Information Technology, Sales, Operations, etc.) to direct compliance issues to appropriate existing channels for investigation and resolution.
  • Maintains appropriate relations with authoritative personnel at all regulatory agencies and facilitates visits of those personnel to our facilities.
  • Responds to alleged violations of rules, regulations, policies, procedures, and Standards of Conduct by evaluating, or recommending the initiation of, investigative procedures. Develops and oversees systems for handling of violations.
  • Acts as an independent review and evaluation body to ensure that compliance issues/concerns within the organization are being appropriately evaluated, investigated and resolved.
  • Monitors and, as necessary, coordinates compliance activities of other departments to remain abreast of the status of all compliance activities and to identify trends.
  • Identifies potential areas of compliance vulnerability and risk, develops/implements corrective action plans for resolution of problematic issues, and provides general guidance on how to avoid or deal with similar situations in the future.
  • Chairs the ISO Management meeting to keep senior management informed of the operation and progress of compliance efforts.
  • Ensures proper reporting of violations or potential violations to duly authorized enforcement agencies as appropriate and/or required.
  • Works with the Human Resources Department and others as appropriate to maintain an effective compliance training program, including appropriate introductory training for new employees as well as ongoing training for identified employees and managers.
  • Monitors the performance of the Compliance Program and relates activities on a continuing basis, taking appropriate steps to improve its effectiveness.

Requirements:
Requires a bachelor’s degree in Business-related field or an equivalent combination of education and experience 
Master’s degree is a plus. Lean or Six Sigma certification is a plus. Requires a minimum of five years manufacturing experience to satisfactorily perform the requirements of the position, which includes time in a Quality discipline and working within a certified quality management system
Certification in environmental, safety or industrial hygiene
Training or knowledge of Emergency Response procedures (Haz-Mat, confined space rescue, etc.)
Advanced knowledge of ES&H regulations (OSHA, EPA, DOT, etc.)
Communication excellence for verbal, written and presentation success
Strategic and systemic competencies to effectively drive continuous improvement
 
 
Job Number: 2010120036
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PA5IQAW&URLSource=cjhunter

Sales Engineer

Description:
A Sales Engineer role located in Seattle, WA is currently available through Belcan. The Sales Engineer is responsible for concept, specification, Engineer interaction, and Sales Support of Custom Engineered Systems, for a 53-year-old, Seattle based manufacturer of industrial hovercraft load moving equipment, tooling and ground support systems. Perfect position for a creative problem solver, as every project presents new challenges!

Sales Engineer duties:

* Work directly with Regional Managers, Customers and Dealers to specify and support the sale of
Custom Engineered and Modified Standard products.
* Partner with inside/outside Sales to plan, prepare and execute on strategic projects in complex
sales cycles
* Communicate directly with customers' engineering team to assess challenges, and collaborate on
appropriate solutions.
* Prepare costing budget, suggested sale price, and strategy to win orders.
* Deliver solution concept to our Engineering team, and work with them to ensure final design
meets the customer expectation.
* Provide ongoing technical support to customers and Sales Team.
* Moderate travel required - visit customers to view technical applications, and form an engineer
to engineer 'partnership' to enhance sales.

EDUCATION AND EXPERIENCE REQUIRED:

* Engineering degree in a technical field
* 3+ years of experience in a manufacturing environment
* Strong written, oral, and presentation skills
* Ability to travel moderately.
* Competitive, entrepreneurial spirit, and driven to succeed.

If you are interested in this Sales Engineer role located in Seattle, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 306475
Job Location: Seattle, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: West Region
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=306475&job_number=306475

Satellite Mechanisms Technician

Description:
Chipton-Ross is seeking 13 Satellite Mechanisms Technicians located in El Segundo, CA.

RESPONSIBILITIES:
Works from preliminary and released design drawings, procedures, test specifications, manufacturing, planning, oral and written instructions. Knowledge of electrical principles is required.
Assists in the fabrication and performance of inspections, manufacturing tests, diagnosis of malfunctions, and preparation of mechanisms for engineering tests. Performs a limited number of tests without direction.
Operates shop equipment such as mechanical and electronic gauges, sine plates, concentricity instruments, tool makers, microscopes and precision weighing equipment. Sets up and operates precision cleaning equipment.
Performs most of the bonding operations, thermal processes, precision measurements, in-process tests and data reduction made in the shop.
Performs work assignments in a clean room environment.
Performs rework of the same nature and level of difficulty as described.
Meets necessary certifications as required.
Performs incidental related duties as assigned or required.

REQUIRED EXPERIENCE:
1 year or less experience doing mechanical or electromechanical work on:
Cars, automotive repair, engines
Remote control cars, planes, drones, gimbals
Military vehicles, aircraft, engines, drones, gimbals, wire harness installation and repair, connector assembly
HVAC installation, wiring, maintenance and repair
Machining, industrial equipment such as air compressors, vacuum pumps, and hydraulic presses
Knowledgeable in using precision measuring devices (i.e. height gages, micrometers, depth gages, and calipers).
* Vision Requirements: Color Vision, Level 2; Visual Acuity, Near 20/20 and Visual Acuity, Far, 20/30

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM
 
Job Number: 188104
Job Location: El Segundo, CA
Rate: $DOE
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Senior Manufacturing Engineer - SECRET

Description:
PDS Tech is seeking a Senior Manufacturing Engineer with an Active Secret Clearance. 

Actively collecting and screening resumes for upcoming needs, please email gsanchez@pdstech.com or call 314-264-3135 to discuss. 

Responsibilities: 

The Senior Manufacturing Engineer in the Defense Airframe business line is responsible for delivering manufacturing engineering solutions to the Programs and Operations organizations up to Life Cycle Gate (LCG) 7.   ME’s develop these solutions to enable and deliver Zero Defect Manufacturing processes during the New Product Introduction (NPI) phase of the product Life Cycle.  ME’s are accountable for defining and delivering robust and capable manufacturing process technology as it applies to materials, tooling, part fabrication and assembly.
  • Responsible for technical support of manufacturing development and integration for New Product Introduction (NPI).
  • Responsible for the implementation of tooling and or production planning, from original concept through to production. ME’s design these processes with a high degree of process capability utilizing standard Zero Defect Manufacturing (ZDM) tool suite.
  • ME’s are accountable for product development, first article development, configuration changes, build process definition and implementation.
  • ME’s deliver measurable, metrics driven results in line with Operational & Program goals.
  • Maintain positive, team relationships with internal and external customers, as well as co-workers
  • Continuously improve production processes by implementing Lean initiatives.
  • Develop technical solutions to complex problems.
  • Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances.
  • Exemplifying a safety-first mind-set and ensuring compliance with the Aerospace Health, Safety and Environmental policies and standards.

Required Qualifications:



  • Bachelor’s Degree in Engineering (Aerospace, Mechanical, Electrical, Chemical)
  • 5 years’ experience in Manufacturing Engineering.
  • Working knowledge of LEAN processes and practices
  • Working knowledge of quality system models such as ISO9000, AS9100, or D1-9000
  • Fluent in English language, both written and spoken
  • Must be a US Citizen
  • Possess an active US DOD Secret Clearance 

Additional Qualifications:

  • Demonstrated experience with AS-9145 Zero Defect Manufacturing, or equivalent automotive PPAP experience
  • Experience with New Product / Process introduction (industrialization) & existing production process improvements
  • Knowledge of statistics and statistical process control (SPC)
  • Strong background with Microsoft Office tools, especially Excel

 
Job Number: 2010121250
Job Location: Garden Grove, CA
Per Diem: Yes
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PDXtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Systems Engineer

Description:
A Senior Principal Systems Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for guiding all phases of system development and support for new business pursuits. To be considered for this role, Bachelor's degree in systems engineering, a related specialized area or field is required plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience. Agile experience preferred. Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.

Senior Principal Systems Engineer Job duties:

* Guide all phases of system development and support for new business pursuits related to the battle management, emergency response, and data analytics systems by providing technical strategy, operational concept development, system architecture definition, requirements analysis, trade studies, and leadership through design, implementation, integration, and test phases
* Proactively determine use cases and requirements, define your own tasks, and execute with little oversight. You will accomplish program goals despite obstacles, ambiguity, changing requirements, and a fast-paced environment
* Participate in requirements analysis and management, functional analysis, performance analysis, system design, trade studies, systems integration and test (verification) in the development and evaluation of networks and information systems
* Mentor and guide less experienced engineers, because you are motivated to improve our work environment and help others
* Support and develop our technical culture by being engaged, intellectually curious, friendly, motivated to solve complex problems, and inspired to deliver superior user-centered design

Qualifications:

* Bachelor's degree in systems engineering, a related specialized area or field is required plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience. Agile experience preferred. Department of Defense TS/SCI security clearance is required at time of hire
* Substantial use, understanding and tailoring of systems engineering concepts, principles and theories
* Substantial proficiency with requirements management & system modeling tools
* Ability to recognize various architectural patterns, apply them appropriately, understand strengths/weaknesses within those architectures and develop architectural variations as necessary

If you are interested in this Senior Principal Systems Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 307918
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2020
Last Updated: 02/22/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Project Engineer

Description:
A Senior Project Engineer position located in Fort Walton Beach, FL is currently available through Belcan. In this role, you will be responsible for leading all engineering that a complex program involves to complete on time and within budget. Will schedule, plan, forecast, resource and manage all the technical activities aiming at assuring project accuracy and quality from conception to completion. To be considered for this role, you will have a Master's or Bachelor's degree in Engineering and 10 years of related experience in the aerospace or defense industry. This is a permanent opportunity with a growing company and has excellent upward mobility.

JOB TITLE Job duties:
* Proven track record as a Project Engineer for Development Programs with a Defense Contractor, within domains of Data Links, Avionics, or Sensor Systems
* Responsible for leading all engineering efforts for a complex project or projects on time and budget
* Ensure design compliance with all project requirements
* Review customer specifications and requirements, and lead a project team to develop designs to best support them, including cost as a key design variable Domain Experience with Arc Fault Detection Systems a plus
* Experience with EVMS and IMS knowledge a plus (Earned Value Management System and Integrated Master Schedule)
* Requires use of DOORS for requirements management
* Lead a project team or teams as assigned

Qualifications:
* Master's degree in engineering or related technical field preferred or Bachelor's with equivalent combination of education and experience
* Minimum of 10 years of experience
* Mastery of technologies and domain knowledge
* Expected to have knowledge and experience in multiple engineering disciplines
* Ability to independently lead a team of engineers to complete a complex project or projects
* Ability to obtain and maintain a Secret Clearance

If you are interested in this Senior Project Engineer position in Fort Walton, FL, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 306697
Job Location: Fort Walton Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/25/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Senior Software Engineer

Description:
A Senior Software Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for performing software requirements analysis, participating in research, designing, developing and testing software and tools, to include development of new work products or enhancing existing applications. To be considered for this role, you will have a bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience; agile experience preferred. Department of Defense Top Secret/SCI security clearance is required at time of hire.

Senior Software Engineer Job Duties:
*Perform technical planning, verification and validation of others work, cost and risk analysis, and supportability and effectiveness analyses for total systems
*Apply the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of technical engineering products
*Research and analyze data, such as customer design proposals, market trends, state of technology and industry, specifications and manuals to determine feasibility of design or application
*Support and develop our technical culture by being engaged, intellectually curious, friendly, motivated to solve complex problems, and inspired to deliver superior user-centered design
*Participate in internal reviews of software components and systems

Qualifications:
*Strong fundamentals in data structures and algorithms
*Solid object oriented programming and software design skills
*Proficient in one of the following: Java, C++, C, or JavaScript (using object oriented techniques)
*Web Services knowledge such as HTML, CSS, JavaScript, React, and Redux
*User Interface development
*Computer science theory (e.g., data structures, algorithms, computational complexity)
*Appreciation for user-centric design
*Full use and understanding of software engineering concepts, principles, and theories
*Effective communication and attention to detail
*Deep exposure to Unix/Linux systems as well as Windows

If you are interested in this Senior Software Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.




 
Job Number: 307943
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2020
Last Updated: 03/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
City, State: West Region
Email: sswatkins@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=307943&job_number=307943

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Stock/Receiving Associate

Description:
Senior Stock/Receiving Associate

Job ID # 2021-12268

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

 

What You’ll Do:

Possess necessary computer skills to proficiently handle routine tasks
Perform the physical or administrative tasks involved in the receiving, storing, distributing and order
Fulfillment of materials, parts, supplies, and equipment
Accurately completes paperwork or system transactions applicable to functions such as receipts or issues
Awareness of company policy and procedures related to job function
Communicate clearly with coworkers, planners, material managers, and internal customers
Maintain accurate stockroom, inventory and system data
Research material shortages and supports problem solving resolution
May gather data for internal audits and extract reports from various computer systems
May handle and process classified material
What You’ll Need:

Lifts heavy items
Ability to heavy items and operate a forklift or other power industrial vehicles
Good computer skills with knowledge of the enterprise software tools (MRP, Receiving) and associated data
Clear knowledge of material receiving, control and inventory methodology
Clear knowledge of Government Customer Property Control
General working knowledge of material receiving, control and inventory methodology
General knowledge of receipt and storage of product
General customer service skills
General collaboration skills
General working knowledge of the enterprise software tools (MRP and Receiving) and associated data
General problem solving skills
General knowledge of Government Customer Property Control
Ability to track, expedite, and pick material shortages to the manufacturing floor
Certification in assigned area is preferred if appropriate.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 2 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2021-12268
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 01/05/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Soldering Assembly Specialist

Description:
A Soldering Assembly Specialist role located in West Caldwell, NJ is currently available at Belcan. The Solder Assembler will perform assembly and testing of printed circuit boards, electromechanical devices, customized integrated systems, cables and wire harnesses.

Soldering Assembly Specialist duties:
* Set up and operate necessary equipment & machinery
* Repair and rework defective or returned assemblies
* Work off of assembly drawings and component IDs
* Forming & bending wire to specification
* Soldering components & sub-assemblies as directed to build and complete a circuit card
assembly
* Perform miscellaneous job-related duties as assigned

Requirements:
* One+ year of experience soldering under a microscope
* High School diploma or equivalent
* Ability to read/write English
* Basic arithmetic knowledge
* Finger dexterity a must
* Ability to work effectively with diverse populations
* US citizen or permanent resident required due to the nature of the work

Preferred but not required:
* J-STD-001 certification
* Mil-Std experience

If you are interested in this Solder Assembler role in West Caldwell, NJ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 305148
Job Location: West Caldwell, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 02/16/2021
Firm Name: BELCAN TECHSERVICES
Attention: KaitlynnPeters
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced ASIC/FPGA Engineer 2

Description:
A Sr. Advanced ASIC/FPGA Engineer 2 job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments. To be considered for this role, you will have a Bachelor's Degree in Electrical or Computer Engineering, or a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Advanced ASIC/FPGA Engineer 2 Job duties:

* Responsible for the definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments.
* Determine the architecture, system simulation and detailed design approach.
* Evaluate process flow.
* Create test simulation plans and verify test results.

Qualifications:

* Significant understanding and experience with the utilization of ASIC/FPGA engineering concepts, principles, and theories.
* Ability to provide resolution to a diverse range of complex problems which require the use of ingenuity and creativity.
* Strong awareness of organization and customer business objectives and engineering's role in achieving them.
* Experience effectively leading teams, through proven leadership skills.
* Keeps abreast of technology trends in ASIC / FPGA.

If you are interested in this Sr. Advanced ASIC/FPGA Engineer 2 job in Greensboro, NC, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 306216
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 02/22/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. CNC Maintenance Technician

Description:
A Sr. CNC Maintenance Technician job in Lake Forest, CA is currently available through Belcan. In this role, you will be responsible for maintaining and repairing CNC 5-axis equipment throughout the facility in accordance with standard procedures, internal requirements, manufacturer's specifications, and safety policies. To be considered for this role, you will have a Requires a High School Diploma/GED and four (4) years relevant work experience with CNC 5-axis maintenance repair.

Sr. CNC Maintenance Technician Job duties:

* Work closely with manufacturing, engineering, and maintenance to get CNC machines up and running to capacity along with maintaining necessary records/documents of maintenance work performed
* Follows detailed operational instructions, procedures and blueprints while conducting maintenance activities
* Determines preventative maintenance requirements for equipment and trains equipment operators to perform routine maintenance
* Maintains a safe and effective work area/environment, using appropriate personal protective and safety equipment
* Regular, consistent, and punctual attendance is required. May need to work nights and weekends, variable schedule(s), and additional hours as necessary

Qualifications:

* Expertise in CNC manufacturing equipment maintenance/repair and solid knowledge in CNC maintenance management
* Proficient in recognizing and solving complex problems from established operating procedures and/or scientific methods
* Ability to read and interpret documents, schematics, and blueprints along with working knowledge of Fidia, Fanuc, Siemens or Heidenhain controllers
* Electrical, hydraulic, and mechanical test equipment knowledge

If you are interested in this Sr. CNC Maintenance Technician job in Lake Forest, CA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308045
Job Location: Lake Forest, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/23/2020
Last Updated: 01/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
A Sr. Manufacturing Engineer job in Marion, VA is currently available through Belcan. In this role, you will be responsible for providing engineering support to all aspects of the Tactical Shelters product line from design and development through start-up, production, integration and test. To be considered for this role, you will have a Bachelor's degree in Manufacturing or Industrial Engineering, or a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Manufacturing Engineer Job duties:

* Provides hands on engineering support to manufacturing/operations in the manufacture of tactical shelters.
* Develops manufacturing BOMs, workflow routers and work instructions for new designs and build to print projects.
* Develops tooling approaches and coordinates tool design and fabrication efforts for new product builds.
* Analyzes and develops processes for manufacturing tolerance control.
* Supports design and development of military tactical shelters covering such areas as detail fabrication, adhesive bonded sandwich panels, mechanical assembly and basic lighting and power systems.

Qualifications:

* Bachelor's degree in Manufacturing or Industrial Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.
* Has mechanical aptitude and strong analytical ability to resolve technical issues, develop new products and develop creative and innovative ideas and solutions.
* Experience and working knowledge of mechanical assembly, welding of thin walled aluminum, aluminum sheet metal fabrication, CNC machining, chemical processes, aluminum skin/honeycomb sandwich panel bonding and painting materials and processes.
* Experience analyzing and developing processes for manufacturing tolerance control.

If you are interested in this Sr. Manufacturing Engineer job in Marion, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 305939
Job Location: Marion, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Hardware Systems Engineer

Description:
A Sr. Principal Hardware Systems Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible and accountable for the electrical technical planning, scheduling, cost analysis, risk analysis and successful execution of major project and programs containing substantial, complex electrical content. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering, or a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Principal Hardware Systems Engineer Job duties:

* Leads electrical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. timing, power, etc.), interface analysis and definition for the design and verification of electrical components, equipment and systems for major programs and projects containing substantial, complex electrical content.
* Leads the requirements and functional allocation to electrical units, modules and components Expert in the principles and techniques of Electrical Engineering.
* Plans and leads electrical engineering root cause analysis for complex electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues.
* Leads the generation and maintenance of electrical work products (i.e. plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers.
* Develops and presents electrical requirements, concepts, designs, decisions and results to internal management, other organizations, teammates and customers.

Qualifications:

* Demonstrated use and understanding of electrical engineering concepts, principles, and theories.
* Demonstrated understanding of electrical engineering processes.
* Aware of business objective and Engineering role in achieving business objectives.
* Understands and applies project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls.

If you are interested in this Sr. Principal Hardware Systems Engineer job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 307266
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/19/2020
Last Updated: 02/25/2021
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Structural Engineer

Description:
A Sr. Structural Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for examining complex metallic and composite structures and systems as well as the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will have a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 10 or more years of relevant experience.

Sr. Structural Engineer Job duties:

* Support the development of primary and secondary flight structures for the Cargo System through structural stress analysis, using both finite element methods and hand calculations
* Originate specifications, control documents, verification and validation plans, procedures, reports, or other documentation in support of design and development activities
* Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements
* Familiarity with fiber reinforced polymer composites analysis including classical laminate theory and finite element modeling techniques is required
* Work with test engineers to develop full-scale test conditions that successfully envelop flight conditions for critical failure modes

Qualifications:

* Experience in Engineering Simulation using Finite Element structural analysis (FEA) tools such as MSC Patran, Nastran, FEMAP, or ANSYS
* Familiarity with NASA and/or FAA structural analysis standards
* Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes
* Basic knowledge of Computer Aided Engineering tools

If you are interested in this Sr. Structural Engineer job in Louisville, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308336
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2021
Last Updated: 01/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Verification Engineer

Description:
A Sr. Systems Verification Engineer job in San Antonio, TX is currently available through Belcan with one of our key aerospace clients in support of prestigious aircraft systems retro-fit/overhaul. In this role, you will be responsible for collaborating with all Systems Engineers and other IPTs (Integrated Product Teams) in accomplishing project task. You will also be responsible for coordination of technical efforts in accordance with the SE project SOW, CDRLs, the project IMP, engineering standard work, and the project IMS. To be considered for this role, you will have a Bachelor's degree Engineering plus a minimum of 10 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Systems Verification Engineer Job duties:

* Requirements Management, Risk Management, System Integration and Issue Resolution, Verification Planning, compliance gap closure, and requirements traceability.
* Support the Chief System Engineer (CSE) and the SE Technical Lead in execution of compliance updates to the subsystem specifications to provide traceability to the Air Vehicle Specification.
* Work with cross-functional teams to resolve issues and ensure the successful integration of design solutions and changes.
* Responsibilities include creating and presenting technical data and metrics, and representing the project in meetings with leadership.

Qualifications:

* This job requires an understanding of the operation and interrelationships of aircraft systems; an appreciation for the impact that configuration or requirements changes may have on performance related attributes, cost and schedule.
* The individual should have experience and a strong understanding of Earned Value Management (EVM).
* The individual will need to be able to work with cross-functional teams to resolve issues and ensure the successful integration of design solutions and changes.
* Experience and proficiency with requirements management tools such as DOORS is preferred.

If you are interested in this Sr. Systems Verification Engineer job in San Antonio, TX, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 303642
Job Location: San Antonio, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/24/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stock Assistant

Description:
Stock Assistant

Job ID # 2021-12306

Contract Opportunity

Location: Jacksonville, FL

Industry: Aerospace & Defense

 

What You’ll Do:

Perform a combination of manual and clerical duties to receive, store, and issue equipment, materials, and supplies in a central warehouse.
Examine stock to verify conformance to specifications and invoices; stores articles according to identifying factors; fills orders or issues supplies from stock; requisitions stock to fill incoming orders; and prepares stock use reports.
Determine methods or places for storage considering guidelines for temperature, humidity, weight or height limits, turnover, floor loading capacity, and required space.
Perform integrated logistics duties and responsibilities associated with daily warehouse operations, including but not limited to, receiving incoming material in inventory and purchasing software, hand delivery to customer sites in Jacksonville, shipment of items to internal and external customers, and general warehousing support. Compile records with quantity, cost, and type of material received, in stock, or issued.
What You’ll Need:

Ability to operate various material handling equipment in accordance with safety requirements and procedures.
Ability to safely move material of various sizes and weights throughout the warehouse and onto/off of trucks. Materials may include industrial material, crates, furniture, electronics, HAZMAT, lumber, vehicles, 55-gallon drums, and other military items.
Ability to read and understand manifests and other transportation documents.
Attention to detail and ability to maintain accurate records.
Must have shipping/receiving and warehouse experience
Forklift certification
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2021-12306
Job Location: Jacksonville, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 10 Months
Input Date: 01/13/2021
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Strategic Quote Analyst

Description:
A Strategic Quote Analyst job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible providing administrative support directly related to supply chain department activities, managers and staff. To be considered for this role, you will have a High School diploma or equivalent is required plus a minimum of 6 years of relevant experience

Strategic Quote Analyst Job duties:

* Processes requests for quotes to suppliers - prior experience is preferred
* Supports proposal and design to cost activities to meet Program needs and requirements
* Coordinates design to cost and design to unit cost activities with internal partners to acquire products and services in a cost effective and timely manner
* Collaborates with commodity managers, line of business managers, engineering, material leads and estimators to make them aware of potential supplier risk
* Monitors program activity to ensure end user accountability and compliance to program and policy

Qualifications:

* Knowledge of reading a Bill of Materials and parts list
* Strong computer skills, proficiency with MS office and other software tools
* Good interpersonal and communication skills, verbal and written
* Solid understanding of the job and applies knowledge and skills to complete a varied range of tasks

If you are interested in this Strategic Quote Analyst job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308388
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/12/2021
Last Updated: 02/22/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Stress Analysis Engineers

Description:
5 Aircraft Stress Engineers Needed in Colorado.
Primary Responsibilities Include:
Support the development of primary and secondary flight structures for the Cargo System through structural stress analysis, using both finite element methods and hand calculations.
Familiarity with fiber reinforced polymer composites analysis including classical laminate theory and finite element modeling techniques is required.
The analysts will work with test engineers to develop full-scale test conditions that successfully envelop flight conditions for critical failure modes.
Originate specifications, control documents, verification and validation plans, procedures, reports, or other documentation in support of design and development activities
Prepare material for, and conduct, periodic design reviews
Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements

Must-haves:
Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience
Understanding of engineering principles and practices
Basic knowledge of Computer Aided Engineering tools
Experience working in multi-disciplinary design and development teams
Exposure to Static and/or Dynamic Analyses

Preferred:
Experience in Engineering Simulation using Finite Element structural analysis (FEA) tools such as MSC Patran, Nastran, FEMAP, or ANSYS
Experience performing fatigue and damage tolerance analysis utilizing tools such as NASGRO or AFGROW
Static test analysis and test correlation
Laminate optimization
Dynamic loads analysis
Development & application of spacecraft and aircraft loads and environments
Familiarity with progressive failure analysis & damage tolerance
Familiarity with NASA and/or FAA structural analysis standards
Ability to perform classical analysis using industry standard hand calculation methods
Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes
Ability to author substantiation reports
Background in the Aerospace and Defense Industry
The ability to obtain and maintain a Security Clearance may be required.

The Structures Company is an AA/EOE.
 
Job Number: 439
Job Location: Boulder, CO
Rate: $50-$75/Hr
Per Diem: Yes
Overtime: No
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 02/04/2021
Last Updated: 03/05/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Currently reviewing and collecting resumes for anticipated upcoming needs. 

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 2010113357
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002frFRQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer III

Description:
A Structural Engineer III job in Englewood, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 14 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance required

Structural Engineer III Job duties:

* Examine complex metallic and composite structures and systems
* Familiarity with aircraft structure/construction
* Familiarity with industry standard analytical methods (Niu, Bruhn, etc.)
* Experience in both classical structural analysis and finite element analysis of metallic and composite aircraft primary and secondary structure
* Ability to prioritize workloads and show flexibility to changing situations / demands
* Ability to communicate with all levels of management, customers, and individual contributors

Qualifications:

* Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 14 or more years of relevant experience
* Demonstrate working knowledge of regulatory and applicable airworthiness criteria including Mil-hdbk-516C and/or 14 CFR Part 25 and Part 23
* Knowledge and experience of aircraft modification programs
* Experience in damage tolerance analysis of metallic aircraft structure
* Experience with MSC Patran/Nastran or Siemens Femap/NX Nastran
* Solidworks and/or CATIA experience. Understands Product Lifecycle Management
* Experience in Structural Dynamics/Vibration analysis
* Experience with narrow body transport category aircraft
* Experienced in execution of government contracts
* Experience in integrating mission systems across a wide variety of primary/secondary structure
* Experience in VBA programming

If you are interested in this Structural Engineer III job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 307481
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/01/2020
Last Updated: 01/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Structural Engineer

Description:
A Sr. Structural Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for examining complex metallic and composite structures and systems as well as the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will have a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience.

Sr. Structural Engineer Job duties:

* Support the development of primary and secondary flight structures for the Cargo System through structural stress analysis, using both finite element methods and hand calculations
* Familiarity with fiber reinforced polymer composites analysis including classical laminate theory and finite element modeling techniques is required
* Work with test engineers to develop full-scale test conditions that successfully envelop flight conditions for critical failure modes
* Originate specifications, control documents, verification and validation plans, procedures, reports, or other documentation in support of design and development activities
* Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements

Qualifications:

* Basic knowledge of Computer Aided Engineering tools
* Experience in Engineering Simulation using Finite Element structural analysis (FEA) tools such as MSC Patran, Nastran, FEMAP, or ANSYS
* Familiarity with NASA and/or FAA structural analysis standard
* Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

If you are interested in this Sr. Structural Engineer job in Louisville, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 308338
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2021
Last Updated: 02/01/2021
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Systems Engineer 5

Description:
Chipton-Ross is seeking a Systems Engineer 5 for an opportunity in El Segundo, CA.

RESPONSIBILITIES:
Seeking a Senior Satellite Narrowband Payload Systems Engineer (Level 5) to support our Space & Launch programs in El Segundo, CA. As a Satellite Digital Payload Systems Engineer, you will design, develop, and deliver state-of-the-art payloads for space-based applications for commercial, civil, Milsatcom, and/or national security programs. You will lead a highly-motivated team that works with domestic or international customers on their latest satellite systems. This is a 1st shift position.

Project assignments typically span the complete program life cycle, from internal trades, concept studies and system definition, to satellite development, launch, and on-orbit operations and test. Candidates will belong to a systems

Primary Responsibilities:
Define and develop satellite systems and payload architectures.
Lead trade studies for advanced technology designs.
Define and verify space payload system requirements and interfaces.
Lead system-level CONOPS development, functional analysis and decomposition.
Lead payload integration and validation.
Perform analyses and simulations for space payload systems.
Perform hardware engineering support, design reviews, and unit sell-off.
Lead system verification preparation, execution, troubleshooting, and sell-off.
Mentor the program junior systems engineers and review their work for quality.

REQUIRED EXPERIENCE:
Basic (Required) Qualifications:
Bachelor's Degree or higher from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
10 years' experience working with digital hardware design, test, and verification.
5 years' experience working on aerospace payload systems.
5 years' experience in engineering leadership.

Preferred (Desired) Qualifications
Experience with technology development and project management.
Experience working with cross-functional teams.

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS: 8:00AM-6:00PM
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 188209
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer, New York, New York

Description:
Systems Engineer, New York, New York
JR-019453

• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

About the role: Work with technical staff to understand problems with software and develops specifications to resolve them. Resolve customer complaints and respond to suggestions for improvements and enhancements from third-party customers. Location: Rochester, NY

You will: Manage requirements across the whole lifecycle. This will include capturing and analyzing all partner requirements – maintaining full traceability at all levels (from requirement definition, planning/scheduling, to development, testing, defect management, to cycle and release management), and documenting the results of verification activities to demonstrate compliance. Migrate requirements from DOORS to QC, Develop coverage. Build any required reporting templates for requirements and trace matrices - export to Windchill for system of record. Simplify Workflow - There is an implementation that needs to be simplified (Quality Center scripting changes for ease of use)Integration of risk management plan (RMP) sheet into QC and allow for updating on new import and updated RMP Sheet Integration with Testing tools, Application automation, Issue / incident management tools, Agile team tools for User stories / Epics / Releases Be a project resource to create system documentation including : User needs, Design Input, Risk management and planning in cooperation with test team.

You'll need: Expertise working with Quality center Enterprise. You have about 10+ years of experience in developing medical devices and have knowledge of Design Control, ISO13485 and related regulatory requirements. Create requirements documents, including exporting DOORS™ templatesExperience with IVD Medical Device Development Process in compliance with applicable FDA and state regulations, and standards including ISO 13485.

Skills & Experience
DOORS, DXL for DOORS, Requirements Analysis, • Working experience in both Assay and Medical devices • Would have working experience in IVD industries
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019453
Job Location: New York, NY
Input Date: 01/27/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Technical Configuration Engineer

Description:
PDS Tech is seeking a Technical Configuration Engineer, in Florence, SC..

Summary:

Responsibilities: The successful candidate will coordinate timely and accurate implementation of product design changes and operational changes into the new equipment business and system configuration development. This includes product configuration through the maintenance of Concept Configurator, JD Edwards MRP System, MS Access based shop views. Qualified person will take a lead role within IPD teams in providing guidance for proper structuring of drawings and data to support contract specifying, NC programming, Pro-E modeling, supply management and manufacturing requirements. The Employee will have responsibility for engineering change implementation by ensuring data and system’s capability testing from sales to final shipment. May be called upon to participate in special projects, perform data analyses, and work up proposals as required.

Education: Bachelor's degree or equivalent in Engineering, Industrial engineering, Information Technology, Management Information Systems, Computer Science or related field required.

Experience: 2+ years experience in Operations and/or Engineering required. The successful candidate should have a good understanding of engineering drawings, manufacturing systems, manufacturing work flow, mainframe processing, configuration software, and ERP BOM management. The candidate should be able to demonstrate quick comprehension of the changing system requirements. Proficiency in MS Access and Excel are a plus. Good interpersonal and business communications skills are required.

 
Job Number: 2010120189
Job Location: Florence, SC
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PAVeQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Program Manager, Arlington, TX / Remote

Description:
Technical Program Manager, JR-019129, Arlington, TX

Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

About The Role:

Cyient is looking for an experienced, transformational Technical Program Manager to lead the creation, design, development, and delivery of software solutions for a highly valued customer. You must have the ability to form and communicate innovative end-to-end life cycle software solutions to customers in collaboration with internal sales and delivery teams. You must have a proven track record of technical program management, strong leadership abilities and telecommunication business development experience.

You Will:

• Serve as a Technical Program Manager for one large customer and oversee multiple small programs.
• Manage and own customer deliveries in collaboration with onshore and offshore sales, technical and delivery teams.
• Develop proactive and forward thinking business proposals & approach notes for influencing sales.
• Conceptualize, design and develop the vision of technological solutions for our customers at a regional level and work to align your vision with the global strategy group.
• Work with OSS domains - Geographical Information Systems, Physical and Logical Network Inventory Solutions, Service management and Assurance/SMA, Field Force Management, etc.
• Lead solution presentations and demonstrations for prospective customers.
• You will report to the Director of Network Solutions.

You’ll Need:

• Master's Degree in Computer Science or equitable Industry experience and Bachelor’s Degree
• 15+ years of expertise in Architecture and Design of Telecom Network Inventory Management Solutions (Granite, Cramer, M6, UIM or similar)
• 15+ years of experience in Communications/Telecommunications industry in leading Consulting Systems/Solution Integration Business process.
• 5+ years of exposure to emerging technologies (e.g. IOT, RPA, ML, AI, SND and NFV)
• Strong knowledge in Telecom inventory management and OSS/BSS.
• Expert knowledge of NMS/EMS Discovery and Reconciliation.
• Strong knowledge of Software Development Life Cycle (SDLC) Models.
• Experience of GSM and Microwave architecture and Triple (VoIP, HIS, IPTV) and Quad (VoIP, HIS, IPTV and GSM) Plays.
• Strong understanding of business and telecom methodologies and frameworks, such as TM Forum Frameworx & eTOM, Agile/SAFe, DevOps, CI/CD.
• Valid US employment authorization; no visa sponsorships will be considered.

Skills & Experience

Agile Framework, Cramer, OSS Solutions, Software, Telecommunications
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019129R
Job Location: Arlington, TX
Input Date: 01/27/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810083900
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKu6AAE&URLSource=cjhunter

Technician I

Description:

Technician I

Job Description:
  • Perform standard part replacement
  • Ability to complete actions by following the action SMP
  • Identify repairs in the interior, exterior, and panel and will repair them.
  • Testing of vehicle to identify any problems.
  • Performs maintenance and repairs on vehicles.


Education/Experience Requirements:

  • High School Diploma/GED Required.
  • Valid US Driver’s License Required.
  • Certified Alabama Safe Driver Course (or equivalent) Required.
  • Knowledge of how vehicle components work and interact Required.
  • Must be able to stand, walk, sit, talk, and hear.
  • Must be able to lift up to 50 pounds occasionally.
  • Minimum 3 years of experience in repair area and/or assembly environment.
  • Broad base knowledge about how vehicle components work and interact.
  • Previous knowledge and/or experience electrical diagnostic preferred.
  • Previous knowledge and/or experience with a computer-based reference material preferred.



In AKKA
As a technology consulting and engineering group at the forefront of the digital and connected world, AKKA is an accelerator of innovation for the world’s largest industrial players.
We provide them with expertise that encompasses the entire technological environment of the product as well as the system integration skills. A leader in the mobility, aerospace, automotive and rail sectors, our teams also work within the Life Sciences, Energy, Defense, and Tele-communications sectors.
AKKA is above all a community, with 16,300 engineers across 22 countries united by their passion for technology. The well-being and personal and professional development of our teams is our priority. To enable this, we advocate diversity, we promote local management and interaction with our leaders and lastly, we encourage our employees to get involved in sporting activities within the business. Our values of Courage, Respect and Ambition are at the core of our daily activities and enable us to understand the challenges we face in a constantly changing world.
Joining the AKKA Group means being at the heart of innovative projects that leave room for your skills and creativity to shine.




 

 
Job Number: 2110123471
Job Location: Vance, AL
Duration: 99 months
Input Date: 12/30/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: B.T. Mastin
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003POKwQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Inconen is looking for a Tool Design Engineer for our client, a well-known Aerospace Company, in Palmdale, CA.

**Candidates must have an Active Secret Clearance or to have had one within the last 2 years. Last investigation must be within the last 2 years.**
**Candidate will be required to work Onsite.**

Job Description:
1. Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions.
3. Provides technical solutions to a wide range of difficult problems.
4. May use CAD/CAM to design tools.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 12668
Job Location: Palmdale, CA
Rate: $75.00 - $95.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 02/11/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Inconen is looking for a Tool Design Engineer for our client, a well-known Aerospace Company, in Palmdale, CA.

**Candidates must have an Active Secret Clearance or to have had one within the last 2 years. Last investigation must be within the last 5 years.**
**Candidate will be required to work Onsite.**

Job Description:
1. Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions.
3. Provides technical solutions to a wide range of difficult problems.
4. May use CAD/CAM to design tools.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 12636
Job Location: Palmdale, CA
Rate: $75.00 - $95.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 Mos
Start Date: ASAP
Input Date: 01/03/2021
Last Updated: 02/11/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Warehouse Associate (1st shift)

Description:
If you’re looking for a Warehouse Associate job, then look no further! We are looking for candidates who thrive in a fast-moving, warehouse environment at our client site.  These positions are for temp to hire Warehouse Associate roles at our client site that is eager to support your growth and development while gaining valuable warehouse experience.
 
Click “apply now” for immediate consideration!
 
As a Warehouse Associate at our client site, you will work as part of a dynamic team to achieve daily operations goals to ensure on time and error free delivery of products and services to our client’s customers. Primary responsibilities include:
  • Receive in materials – unload trucks, validate quantities and product data and enter data in a computer
  • Pull and/or stock materials using Radio Frequency (RF) scanning system
  • Label, package and prepare material for shipment
  • Perform cycle counts and inventory audits to ensure accurate inventory in system
  • Maintain a clean and safe work environment
  • Utilize pallet jacks, drum dollies, drive forklifts, and/or order picker when trained or certified
  • Other related duties as assigned

 
Do you have what it takes to work for us at our client site?  If you meet the qualifications below, the answer is YES!

  • High School Diploma or GED
  • 1-2 years of related experience
  • Basic computer and forklift skills
  • Safety focused
  • Valued Team Member
  • Ability to lift up to 50 lbs

 
Shifts available:

  • 2:30pm – 11:00pm

 
What’s in it for YOU?

  • Medical, dental, and vision plans
  • 401(k) Plan
  • Skills Training
  • Weekly pay with direct deposit

 
About our Client:
Our client is a  leading, global provider of innovative supply chain solutions. Their promise to customers is to reduce complexity and increase reliability so they can deliver mission-critical solutions that improve our world.
 
With a strong foundation in the aerospace and defence markets, our client utilizes their expertise to serve industrial manufacturing, marine, pharmaceuticals, and beyond. Managing all aspects of supply chain from procurement to warehouse management, from logistics to on-site customer services.
 
Our client is an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, gender, disability, religion/belief, sexual orientation, or age and they welcome our Military Veterans to apply!
 
 
COVID-19 Updates:
Like everyone around the country, we are taking this pandemic and your health serious!  Our client has taken every precaution to keep all workers safe by providing PPE, hand sanitizer, encouraging social distancing, onsite cleaning throughout the day and a deep clean each night. 
 
 
So now that you know about this temp to hire job and about us, the ball’s in your court. For instant consideration for this Warehouse Associate job, click on Apply Now! After submitting your application, you can choose to answer a few quick questions to be pre-qualified for the job, and you will have the opportunity to schedule an immediate interview!
 
See you soon!
 
If you’re looking for a Warehouse Associate job, then look no further! We are looking for candidates who thrive in a fast-moving, warehouse environment at our client site.  These positions are for temp to hire Warehouse Associate roles at our client site that is eager to support your growth and development while gaining valuable warehouse experience.
 
Click “apply now” for immediate consideration!
 
As a Warehouse Associate at our client site, you will work as part of a dynamic team to achieve daily operations goals to ensure on time and error free delivery of products and services to our client’s customers. Primary responsibilities include:
  • Receive in materials – unload trucks, validate quantities and product data and enter data in a computer
  • Pull and/or stock materials using Radio Frequency (RF) scanning system
  • Label, package and prepare material for shipment
  • Perform cycle counts and inventory audits to ensure accurate inventory in system
  • Maintain a clean and safe work environment
  • Utilize pallet jacks, drum dollies, drive forklifts, and/or order picker when trained or certified
  • Other related duties as assigned

 
Do you have what it takes to work for us at our client site?  If you meet the qualifications below, the answer is YES!

  • High School Diploma or GED
  • 1-2 years of related experience
  • Basic computer and forklift skills
  • Safety focused
  • Valued Team Member
  • Ability to lift up to 50 lbs

 
Shifts available:

  • 2:30pm – 11:00pm

 
What’s in it for YOU?

  • Medical, dental, and vision plans
  • 401(k) Plan
  • Skills Training
  • Weekly pay with direct deposit

 
About our Client:
Our client is a leading, global provider of innovative supply chain solutions. Their promise to customers is to reduce complexity and increase reliability so they can deliver mission-critical solutions that improve our world.
 
With a strong foundation in the aerospace and defence markets, our client utilizes their expertise to serve industrial manufacturing, marine, pharmaceuticals, and beyond. Managing all aspects of supply chain from procurement to warehouse management, from logistics to on-site customer services.
 
Our client is an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, gender, disability, religion/belief, sexual orientation, or age and they welcome our Military Veterans to apply!
 
 
COVID-19 Updates:
Like everyone around the country, we are taking this pandemic and your health serious!  Our client has taken every precaution to keep all workers safe by providing PPE, hand sanitizer, encouraging social distancing, onsite cleaning throughout the day and a deep clean each night. 
 
 
So now that you know about this temp to hire job and about us, the ball’s in your court. For instant consideration for this Warehouse Associate job, click on Apply Now! After submitting your application, you can choose to answer a few quick questions to be pre-qualified for the job, and you will have the opportunity to schedule an immediate interview!
 
See you soon!
 
Job Number: 2110123481
Job Location: Jonestown, PA
Duration: 6 months
Input Date: 01/12/2021
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003POM9QAO&URLSource=cjhunter

Back to Advanced Job Search