Job Search Results

367 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/02/17 Monday 05:40AM Pacific Time by ContractJobHunter. )

Listings 1 - 367

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret would be acceptable****

Job Description:
1. Flight Test Engineer for Navy F-35 test aircraft at Patuxent River NAS, Maryland.
2. The successful applicant will provide Ground and Flight Operations engineering support.
3. Tasks will include coordination and execution of pre-flight and post-flight activities to ensure aircraft's test readiness including issuance, and closure of documentation relating to work performed on the aircraft, and coordination of aircraft modifications.
4. Position may be responsible for control and tracking of aircraft configuration, coordinating and staging of support equipment, and coordinating with other organizations associated with test readiness.
5. Tasks include planning and executing weapons test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of weapons related test flights, requesting/analyzing post-flight data, and supporting weapons system anomaly resolution as well as on-aircraft troubleshooting of weapons related hardware.
6. May also include support flight science (Flying Qualities/Performance/Structural Loads/Structural Dynamics) flight test, providing real time control room monitoring support of the STOVL and CV flight test aircraft, conducting pre-flight predictions and post flight data requests, and supporting flight test anomaly resolution and correlation of predictive aerodynamic databases with measured flight test data.

This position will work with maintenance and engineering personnel. The ability to interface with all levels of project management is desired.
1. Developing and publishing test plans and flight test cards,
2. Determining and communicating aircraft test requirements and configuration to responsible engineering, maintenance, instrumentation, and flight operations personnel to ensure aircraft readiness,
3. Complying with published test safety plans and standard operating procedures,
4. Conducting test missions and performing test mission briefings and debriefings, after meeting qualification requirements.
5. Evaluating results from flight activities and incorporating 'lessons learned' into future test activities.
6. 'Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access.'
7. Position requires an interim secret clearance to start.

Desired skills
1. Demonstrated Verbal and Written Communication skills along with experience in LM applications and electronic tools: ALIS, JEDI, PDM, and JDL and wiring diagrams; aircraft ground test experience.
2. Plus to have a Bachelor's degree.
3. MATLAB experience
4. Proficient programmer and tool developer in FORTRAN, VBA, or C/C++.
5. Experience working with UNIX/LINUX based workstations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11941
Job Location: Patuxent River, MD
Rate: $57.48 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 12/09/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aircraft Painter B

Description:
Chipton-Ross is seeking 20 Aircraft Painter B's for openings in North Charleston, SC.

RESPONSIBILITIES:
Performs painting of aircraft sections per customer''s design and unique livery requirements. Verifies aircraft is ready for exterior finish. Makes necessary patterns, performs layout and applies prescribed primers, paints and finishes to exterior of aircraft. Prepares exterior surface of aircraft for painting.

REQUIRED EXPERIENCE:
- Suitable candidates for these aircraft painter positions will have THREE years of direct Aerospace paint experience as a minimum requirement, and preferably have greater than FIVE years of Aerospace painting experience.
- CANDIDATES WITHOUT AEROSPACE PAINTING EXPERIENCE will NOT be considered.

ADDITIONAL EXPERIENCE:
Adhesive Materials/Processes - Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.
Color Match - Knowledge of color space, color analysis, paint formulation, and paint application techniques to evaluate, match, and develop decorative finishes.
Engineering Drawings & Specs - Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
General Shop Processes - Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
Materials & Processing - Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).
Organic Chemical Processing - Knowledge of organic chemical processes (such as top-coating, priming, surface cleaning).
Polymers & Composite Materials - Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

WORK ENVIRONMENT:
• Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
• Contact with sealants and solvents, exposure to noise, working on elevated platforms
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
• Occasional contact with metals
• Exposure to plastics and solvents to atmospheric conditions
• Frequent exposure to noise

EDUCATION:
Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

FULL TIME/2ND SHIFT
WORK HOURS: 2:30 PM - 11:00 PM
Candidates must be able to support all shifts per business needs. Shifts will be assigned during assignment to meet business needs.

MISCELLANEOUS:
Candidates will be required to attend and pass a training classes. Failure of training may be cause for assignment termination. This position requires an individual to work at heights utilizing fall protection equipment. Candidate must be able to obtain Fall Protection Certification. This is also contingency of assignment - Fall Protection Regulations - OSHA 1926, 191066, 1910 Subpart D.

 
Job Number: 183776
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 12/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Painter C

Description:
Chipton-Ross is seeking 20 Aircraft Painter C's for openings in North Charleston, SC.

RESPONSIBILITIES:
Performs painting of aircraft sections per customer''s design and unique livery requirements. Verifies aircraft is ready for exterior finish. Makes necessary patterns, performs layout and applies prescribed primers, paints and finishes to exterior of aircraft. Prepares exterior surface of aircraft for painting.

REQUIRED EXPERIENCE:
- Suitable candidates for these aircraft painter positions will have THREE years of direct Aerospace paint experience as a minimum requirement, and preferably have greater than FIVE years of Aerospace painting experience.
- CANDIDATES WITHOUT AEROSPACE PAINTING EXPERIENCE will NOT be considered.

ADDITIONAL EXPERIENCE:
Adhesive Materials/Processes - Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.
Color Match - Knowledge of color space, color analysis, paint formulation, and paint application techniques to evaluate, match, and develop decorative finishes.
Engineering Drawings & Specs - Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
General Shop Processes - Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
Materials & Processing - Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).
Organic Chemical Processing - Knowledge of organic chemical processes (such as top-coating, priming, surface cleaning).
Polymers & Composite Materials - Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

WORK ENVIRONMENT:
• Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
• Contact with sealants and solvents, exposure to noise, working on elevated platforms
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
• Occasional contact with metals
• Exposure to plastics and solvents to atmospheric conditions
• Frequent exposure to noise

EDUCATION:
Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

FULL TIME/2ND SHIFT
WORK HOURS: 2:30 PM - 11:00 PM
Candidates must be able to support all shifts per business needs. Shifts will be assigned during assignment to meet business needs.

MISCELLANEOUS:
Candidates will be required to attend and pass a training classes. Failure of training may be cause for assignment termination. This position requires an individual to work at heights utilizing fall protection equipment. Candidate must be able to obtain Fall Protection Certification. This is also contingency of assignment - Fall Protection Regulations - OSHA 1926, 191066, 1910 Subpart D.

 
Job Number: 183774
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 12/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Application Developer / Analyst

Description:
Design, develop, code, test, document and implement new applications as necessary, modify existing web applications, and maintain and support the current web environment;
- Meet with end users to gather project requirements;
- Day to day support for LDWF web based systems;
- Day to day support of SQL databases, including database migrations, upgrades, design, and creation;
- Transform separate data sources such as spreadsheets and paper documents to constraint based common database structures;
- Develop workflow approval processes to assist in transforming paper processes to electronic processes;
- Must have working knowledge of accounting principles
- Provide technical knowledge transfer, training and documentation to OTS staff for all work
- Provide user training and manuals.
AdditionalJob Details:

Basic Qualifications:
- Microsoft .NET with C# - Microsoft IIS 7.5 and higher
- MVC (Model View Controller)
- Web Services/Methods (XML, JSON, SOAP) - Microsoft SQL 2012 and higher
- SQL SSRS/SSIS (Reporting Services/Information Services) Preferred Qualifications:
- PowerBI and/or Tableau
 
Job Number: x20190203
Job Location: Baton Rouge, LA
Rate: $40.00/hr
Duration: 54 - 55 Months
Input Date: 11/20/2019
Last Updated: 02/13/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

Assembler

Description:
PDS Tech, Inc. is seeking an Assembler in Clearwater, FL.

Please contact Casey Carrion via phone 719-510-0778 or email your resume to ccarrion@pdstech.com


Summary:
  • Assembles fabricated parts at floor stations
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications
  • Uses hand tools and power tools to assemble units according to product specifications
  • Identifies units that fail tests or tolerance levels and repairs as necessary
  • Relies on instructions and pre-established guidelines to perform the functions of the job
  • Works under immediate supervision








 
Skills/Qualifications:
  • Due to government regulations, must be a US Citizen
  • High School Diploma or GED
  • 5-7 years of Assembler experience (i.e. soldering, wiring & electronics).
  • Ability to work with “fine pitch” components & detail chassis wiring
  • Working knowledge of computers strongly desired
  • IPC-7711/7721 IPC Certification Training
  • IPC/WHMA-A-620 Certification Training
  • Self-directed teaming skills
  • Good written & verbal communication skills
  • Continuous Improvement skills (6-Sigma); greenbelt is a plus
  • Good Team Player

 
Job Number: 1910108119
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 10/24/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQ5JQAU&URLSource=cjhunter

Assembler - Level 4

Description:
PDS Tech, Inc. is seeking an Assembler in Clearwater, FL.
1st & 2nd Shift Openings

Job Details:
  • Assembles fabricated parts at floor stations
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications
  • Uses hand tools and power tools to assemble units according to product specifications
  • Identifies units that fail tests or tolerance levels and repairs as necessary
  • Relies on instructions and pre-established guidelines to perform the functions of the job
  • Works under immediate supervision
  • Primary job functions do not typically require exercising independent judgment





 
Skills/Qualifications:
  • Due to government regulations, must be a US Citizen
  • High School Diploma or GED
  • 5-7 years of Assembler experience (i.e. soldering, wiring & electronics).
  • Ability to work with “fine pitch” components & detail chassis wiring
  • Working knowledge of computers strongly desired
  • IPC Certification a plus
  • Self-directed teaming skills
  • Good written & verbal communication skills
  • Continuous Improvement skills (6-Sigma); greenbelt is a plus
  • Good Team Player



 
 
Job Number: 2010110587
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 12/31/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002feIfQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166612 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2358-1
Max Pay Rate: $21.00/hr
Start Date: 10/26/2019
End Date: 10/26/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.


Skills: Category Name Required Importance Experience
Technical Skills Ability to work in a production environment Yes 4 1 - 2 Years
Technical Skills Assembly Process Yes 5 1 - 2 Years
Technical Skills Basic Computer Skills Yes 6 1 - 2 Years
Technical Skills IPC-A-610 Yes 3 1 - 2 Years
Technical Skills IPC-J-STD Yes 2 1 - 2 Years
Technical Skills Soldering Yes 1 1 - 2 Years


Qty 3 positions
A BS Degree is NOT required for these positions.
 
Job Number: LMRMS-2358-1
Job Location: Marion, MA
Rate: 21/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166646 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2461-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract


Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position does not require a BS Degree.
Prefer candidates with J Standard as well as IPCA 6-10 and 6-20.

Qty 1 position
Hiring Manager would prefer to see candidates with J Standard as well as IPCA 6-10 and 6-20.
 
Job Number: LMRMS-2461-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance VA

Description:
167392 Job Title: Assembler

Work Site Address: Manassas, VA 20110
Job Number: 3021-1
Max Pay Rate: $25.00/hr
Start Date: 2/9/2020
End Date: 2/28/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.
The candidate will support Prep for Ship activities in the Paint/Prep area for all Manassas programs.
Activities will include paint / touch-up of units, preparing unit deliverables for presentation / sell-off to customer, and the coordination and presentation of units for final sell-off to various Navy customers.
This position may have some very light assembly work.

Qualifications and Education Requirements
This position does NOT require a BS degree. HS diploma is required.
1-3 years of manufacturing experience.

Qty 1 position
Hourly Pay Rate Range is $18-$25 based on candidates experience.
 
Job Number: LMRMS-3021-1
Job Location: Manassas, VA
Rate: 18-25/hr max
Duration: 12 months
Input Date: 01/17/2020
Last Updated: 02/04/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / cable harness, soldering required - no clearance FL

Description:
167182
Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2902-1
Max Pay Rate: $22.00/hr
Start Date: 1/6/2020
End Date: 12/18/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Mandatory Must be able to Solder
• Must have good manual dexterity
• Strong mechanical build experience accurately reading and interpreting written work instruction, drawings, sketches, and wiring diagrams.
• experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Use of manual and automatic wire strippers.
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions.

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years
Technical Skills Cable Harness Yes 5 2 - 4 Years

Qty 3 positions
 
Job Number: LMRMS-2902-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 12/20/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering / assembly experience - no clearance URGENT MA

Description:
167109 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2561-1
Max Pay Rate: $15.00/hr
Desired Start Date: 12/30/2019
End Date: 12/28/2020

Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position DOES NOT require a BS

Skills: Category Name Required Importance Experience
Technical Skills Assembly Process No 1 < 1 Year Technical Skills Soldering No 1 < 1 Year Qty 9 positions
 
Job Number: LMRMS-2561-1
Job Location: Marion, MA
Rate: 15/hr max
Duration: 12 months
Input Date: 12/09/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering experience required - 2nd Shift - no clearance URGENT MA

Description:
166645 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2458-1
Max Pay Rate: $20.00/hr
Start Date: 11/4/2019
End Date: 11/2/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This is an Entry Level position.
This position does not require a BS Degree.

Skills: Category Name Required Importance Experience
Technical Skills Soldering No 1 < 1 Year Qty 1 position 2nd shift
 
Job Number: LMRMS-2458-1
Job Location: Marion, MA
Rate: 20/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Assembler / soldering required - no clearance FL

Description:
167138 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2855-1
Max Pay Rate: $22.00/hr
Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Must have Soldering Experience, a test will be issued within the first 3 days of training.
Pay Rate $15-$22/hr. Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2855-1
Job Location: Oldsmar, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 02/14/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Assembler B

Description:
Chipton-Ross is seeking a Assembler B for an opening in El Segundo, CA.

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Assembles, inspects, modifies and reworks developmental electronic subsystems, subunits, assemblies, components and harnesses and cables, used for experimental and preproduction purposes. Under engineering direction sets up and operates all types of equipment to fabricate and assemble complete flight, developmental and prototype microelectronic circuit assemblies. May set up and operate small bench microweld machines in laboratory areas. Typical Duties and Responsibilities:
• Works from blueprints, schematics, samples lacking complete details or specific information, assembly drawings, sketches, oral and written instructions requiring the identification of all circuit symbols, wiring codes and electrical components.
• Determines work sequence, positions, assembles and modifies developmental electronic devices such as radar synchronizers, computers and roll servo units in accordance with schematics, wiring diagrams or other specifications, using pre-drilled chassis and printed wiring boards. Routes and connects wires and cables in the proper manner so that parts, wires or cables are reasonably accessible for removal and replacement and are mechanically connected, soldered or welded according to prescribed standards. Fabricates and routes wire harnesses and cables on panels, modules and chassis. Uses appropriate technology to assure components assembled will not shift position. Fabricates thin or thick film substrates using all appropriate processes. Fabricates and assemble microminiature circuit parts using special resins, thermo compression die bonding, ultrasonic and parallel gap microwelding and microsoldering techniques.
• Identifies and selects, as called out on schematic wiring diagrams, various electrical components of proper value or size by color code, coded label or other related identification characteristics. Identifies terminal connections for components as required.
• Installs parts and components for proper rotation and polarity. Checks for proper continuity, workmanship and make capacitance and resistance measurements.
• Assists in the development of revised or new methods, techniques and procedures. Makes oral and written reports as required.
• Works efficiently and completes all task with little or no supervision, performs soldering on all type of standard and fine pitch components. Perform soldering on complex wire connectors with little or no supervision, Applies bonding staking and coating. Assists engineering in improving methods, processes and procedures.
• Ascertains that all welds are satisfactory or removes components and rewelds.
• Cleans equipment as required.
• Meets necessary certifications as required.
• Performs rework of the same nature and level of difficulty as described.
• Performs incidental related duties as assigned or required.

ADDITIONAL EXPERIENCE:
• IPC J-STD-001 Training and Certification preferred but not required.

EDUCATION:
Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate)

FULL TIME/FIRST SHIFT
WORK HOURS: 5:30 AM - 2:30 AM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 183757
Job Location: El Segundo, CA
Rate: $DOE
Duration: 5 Months
Input Date: 12/20/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician

Description:
Avionic Technician

Job ID # 2019-10491

Contract Opportunity

Location: Greenville, SC

Industry: Aerospace & Defense

 

What You’ll Do:

Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
Work from schematics, engineering drawings and written or verbal instructions.
Operate related equipment; conducts tests and reports data in prescribed format.
Perform calibration and alignment checks.
Make adjustments, modifications, and replacements as directed.
Prepare prescribed compounds and solutions.
 

What You’ll Need:

Modification experience strongly desired.
Must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
Areas if Expertise: C-130.
This position supports a 9/80A-1st shift work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2020-10491
Job Location: Greenville, SC
Input Date: 01/07/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Avionic Technician

Description:
Chipton-Ross is seeking an Avionic Technician for an opportunity in Greenville, SC

RESPONSIBILITIES:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

DESIRED EXPERIENCE:
Aircraft Modification 2-4 years and C-130H 2-4 years

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

WORK HOURS:
Full-Time, 9/80A-1st Shift

 
Job Number: 182557
Job Location: Greenville, SC
Rate: $DOE
Duration: 9 months
Input Date: 10/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 01/13/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionic Technician - no clearance URGENT SC

Description:
167249 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2948-1
Max Pay Rate: $29.00/hr
Start Date: 1/16/2020
End Date: 8/14/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Installs wire harnesses in aircraft to include routing and termination.

Qualifications and Education Requirements
Modification experience STRONGLY desired
Must have previous aircraft modification experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification Yes 1
Areas of Expertise C-130 No 1

Qty 10 positions
Contract length likely to extend
MORE RESUMES NEEDED
Modification experience STRONGLY desired

Manager motivated to make selections quickly
 
Job Number: JEG-2948-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months plus extension
Input Date: 02/10/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 desired - no clearance SC

Description:
165856/1895-1
Avionic Technician
Greenville, SC 29605
29/hr max

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

Areas of Expertise C-130 No 1 4 - 6 Years

Qty 5 positions needed
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG-1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/01/2019
Last Updated: 02/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics Certification Engineer

Description:
Support the verification and test of high-performance Avionics hardware and systems.
• Perform system and component-level avionics requirements validation and verification
• Document failure mode, effects, and critical analysis (FMECA) cases and pursue corrective actions
• Write and update technical documentation for certification
• Capture and communicate technical risks and waivers
• Analyze test and flight data, to help with verification activities
• Detailed electronics design and analysis experience
• Experience with DO-160, MIL-STD-1540, or SMC-S-016 Environmental test standards
• Familiarity with ARP4754A, DO-254 and DO-178 and related Design processes
• Experience / exposure to IBM DOORs tool
 
Job Number: 4545
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 05/02/2019
Last Updated: 02/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience with avionic sub-systems.
2. Previous experience with DD-1494 (Frequency Allocation Request) or Spectrum certification.
3. RF compatibility analysis or EEE (electromagnetic environmental effects) experience.

Desired Skills:
1. Specific knowledge and hands on experience with CNI subsystems.
2. Knowledge of IFF.
3. F-35 program experience.
4. Current F-35 clearances including SAP.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11743
Job Location: Fort Worth, TX
Rate: $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/22/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience with avionic subsystems
2. F-35 factory or fleet/field experience
3. Previous experience with subcontractor technical management.
4. Electronic subsystems troubleshooting experience

Desired Skills:
1. Specific knowledge and hands on experience with CNI, Radar, EW, or ICP subsystems.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. F-35 program, PHM and Sustainment experience.
4. Electronic/optical device level knowledge
5. Ability to work across multiple internal and external customers/organizations to resolve technical and production issues.
6. Current F-35 program experience and clearances.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11747
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/22/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret is acceptable****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university.
2. Experience in avionics or electronic warfare system integration and test.

Desired Skills:
1. Direct hands-on experience with system integration/testing and data analysis.
2. Willingness to contribute in both technical and non-technical areas to ensure team/program success.
3. Experience in product development and testing of supplier developed hardware.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11704
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in technical discipline
2. Experience with Aircraft Avionics systems

Desired Skills:
1. Active F-22 Projects Clearance
2. Experience presenting
3. Experience with customer interaction
4. Experience with AGILE
5. Diligent at maintaining relevant members apprised of task status
6. Experience with Microsoft Office tools (i.e. Excel, Outlook, and PowerPoint)

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11705
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
1. Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
2. Any familiarity with JSF avionics suite or systems engineering processes.
3. JSF program clearance.
4. Good communication and analytical skills.
5. Experience designing, programming and testing mission data
6. Experience in data analysis of Combat Integrated Mission System
7. Experience with Electronic Warfare Integrated Reprogramming (EWIR)
8. Hands on lab testing of RF systems
9. Experience with Foreign Military Exploitations (FME)
10. Proficient with Microsoft Office products and Database applications

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11673
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / F-35 avionic subsystems - Clearance TX

Description:
166665
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2232-1
Max Pay Rate: $72.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Basic Qualifications
Experience with avionic subsystems
F-35 factory or fleet/field experience
Previous experience with subcontractor technical management.
Electronic subsystems troubleshooting experience

Desired skills
Specific knowledge and hands on experience with CNI, Radar, EW, or ICP subsystems.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
F-35 program, PHM and Sustainment experience.
Electronic/optical device level knowledge
Ability to work across multiple internal and external customers/organizations to resolve technical and production issues.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2232-1S
Job Location: Fort Worth, TX
Rate: 72/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / RF compatibility analysis or EEE (electromagnetic environmental effects) experience - Clearance TX

Description:
166653 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2231-1
Max Pay Rate: $72.00/hr
Start Date: 10/29/2019
End Date: 1/29/1021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
Experience with avionic sub-systems
Previous experience with DD-1494 (Frequency Allocation Request) or Spectrum certification
RF compatibility analysis or EEE (electromagnetic environmental effects) experience

Desired skills
Specific knowledge and hands on experience with CNI subsystems.
Knowledge of IFF.
F-35 program experience.
Current F-35 clearances including SAP.


Qty 1 position
 
Job Number: JE-2231-1S
Job Location: Fort Worth, TX
Rate: 72/hr max
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / RF flight test EWS ECM EW Radar TX

Description:
166522 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2179-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
• Any familiarity with JSF avionics suite or systems engineering processes.
• Good communication and analytical skills.
• Experience designing, programming and testing mission data
• Experience in data analysis of Combat Integrated Mission System
• Experience with Electronic Warfare Integrated Reprogramming (EWIR)
• Hands on lab testing of RF systems
• Experience with Foreign Military Exploitations (FME)
• Proficient with Microsoft Office products and Database applications



Qty 2 positions
 
Job Number: JE-2179-1ATO
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/07/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166552
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2306-1
Max Pay Rate: $62.26/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university
Experience in avionics or electronic warfare system integration and test.
Desired skills
Direct hands-on experience with system integration/testing and data analysis.
Willingness to contribute in both technical and non-technical areas to ensure team/program success.
Experience in product development and testing of supplier developed hardware.

Qty 1 position
 
Job Number: JE-2306-1S
Job Location: Fort Worth, TX
Rate: 62.26/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Business Analyst 3

Description:
RESUME REQUIREMENTS:
- Given the candidate is selected and an offer is presented, how much time is needed before they can start?
- CTH Salary requirements
- Include current location on resumes


Business Analyst
- Business Process SME responsible for requirements documentation including Business Use Cases, interviews and information architecture baseline for workflows
- Technical and Process SME responsible for documenting all specifications including requirements, design, and administration guides
- Responsible for support of configuration and implementation activities
- Lead design and develop of support documentation, System Manual, Operating Procedures & Training Materials
- Analysis of business application and electronic record content; development of guidelines to capture, manage, preserve, and dispose of record content over its lifecycle
- Implementing information management policies and procedures
- Development of detail work plans
- Provides analysis of problems and recommends solutions
- Prepare operating procedures documentation
- Content & Communications

Additional Job Details:
Mandatory expertise and relevant experience: Minimum 2-5 years of experience in Enterprise Content Management; with detail knowledge of retention schedules, classification schemes, taxonomy and Records Management best practices
- Experience with implementation of Document Management programs
- Experience with large-scale content migration Desirable expertise and relevant experience:
- Master’s degree in Library and Information Science (MLIS), Certified Records Manager or other relevant job experience.
- Experience working with FileNet P8 platform, IBM Content Manager, IBM Case Manager, IBM Content Navigator, and IBM Enterprise Records.
- Working knowledge of Document Management software
- Knowledge of Louisiana State Archives requirements for maintaining and destruction of records
 
Job Number: x20190195
Job Location: Baton Rouge, LA
Duration: 55 Months
Input Date: 11/14/2019
Last Updated: 02/13/2020
Firm Name: XPEERANT
Attention: Don Semple
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: dsemple@xpeerant.com
Website: www.xpeerant.com

Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Communications Contractor FL

Description:
167349 Job Title: Communications Contractor

Work Site Address: Orlando, FL 32825

Max Pay Rate: $19.00/hr
Start Date: 1/13/2020
End Date: 1/13/2021
Position Type: Contract

Job Summary:
This position will be challenged with projects focused on communication and dissemination of information such as policy, procedures, trends and directives of communications within the security organizations, through various forms of media, examples: Connect Security electronic newsletter, web pages, memos/messages, talking points and other pertinent materials.

Critical writing and editing of security procedures on technical content. Strong communications skills will be needed in this position. This position is writing intensive and, thus, requires strong writing and editing skills. The position also requires an ability to work with senior leadership and manage multiple projects; to think strategically and develop and execute well-rounded plans; and to provide internal communication guidance to various audiences while ensure spelling, punctuation, capitalization, and grammar contained with security communications is correct. Other projects within the Security function may be assigned.

Qualifications and Education Requirements
• Marketing/Communications BA Degree is required.
• Does not need to have actual marketing experience, especially if they are recently graduated.
• Does need to be ok with public speaking and have excellent writing skills.
• Strong experience in public speaking
• Excellent presentation skills
• Demonstrated effective project management skills
• Effective writing and verbal communications skills
• Strategic, critical thinker
• Effective interpersonal skills and demonstrated ability to work with employees and leaders at all levels of the organization.
• Ability to handle multiple priorities under deadlines
• Agile, adaptable self-starter
• Proficiency with various Microsoft Office Suite applications
• Experience in writing communications and memos
• Ability to perform updates on webpages

Qty 1 position

Possible temp to hire
Does not need to have actual marketing experience, especially if they are recently graduated.
Does need to be ok with public speaking and have excellent writing skills.
 
Job Number: LMEBS-001
Job Location: Orlando, FL
Rate: 19/hr max
Duration: 12 months
Input Date: 01/13/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Contracts Administrator

Description:
Chipton-Ross is seeking a Contracts Administrator for an opening in Redmond, WA.

RESPONSIBILITIES:
The Level 2 Contracts Administrator performs entry level professional assignments under direct supervision.

20% Assists in the administration of major contracts. Supports proposal development and negotiations and associated contract awards, change orders and/or modifications. Responsible for preparing a variety of reports, documentation, justification, and recommendations as directed. Coordinates with a multi-disciplined Program Management team for preparation of proposal documents in response to external customers proposal requests. Performs review and evaluation of terms and conditions of contracts for contractual requirements and risks. Coordinates with Program Management team and Accounts Receivable to provide timely invoicing and payment for assigned contracts.

20% Interfaces with internal and external customers to answer inquiries, conducts fact-finding discussions, and interprets contract terms for problem resolution

15% Prepares weekly status reporting to management of work in progress, prepares response to internal data calls as required.

15% Performs contract closeout activities to include physical and electronic filing and interaction with multi-functional teams.

10% Organizes and assumes responsibility for maintenance of files, records and other documents.

10% Stays current on changes to government regulations and industry practices.

10% Fosters ethical conduct, practices and personal integrity throughout the Company to ensure the ability to attract and retain customers in a highly competitive environment

REQUIRED EXPERIENCE:
Must have excellent knowledge of personal computer applications including word processing, spreadsheet and database.
Possess substantial knowledge of standard office procedures, filing systems, related office machines and general aspects of the job.
Must have excellent oral and written communication skills to interact effectively with individuals representing outside organizations and or within the company.
Ability to work well under constantly changing deadlines and priorities expected.

DESIRED EXPERIENCE:
Familiarity or working knowledge of Federal Acquisition Regulation, Defense Federal Regulations (DFAR), related federal and state legislation and regulations, and the Uniform Commercial Code. Prior contract administration experience within the Aerospace & Defense industry. Positive attitude, ability to self-initiate and take ownership of assignments.
Basic understanding of operations control and proposal evaluation desired.
Full understanding and application of contract administration principles, concepts, practices and standards a plus

EDUCATION:
Accredited Bachelor's degree in an appropriate discipline with three (3) years experience, or an equivalent combination of education and experience.

WORK HOURS:
9/80
Full-Time

 
Job Number: 183973
Job Location: Redmond, WA
Rate: $DOE
Duration: 3 Months CTH
Input Date: 01/08/2020
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Silmese Graves
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: sgraves@chiptonross.com
Website: www.chiptonross.com

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

Job Summary


This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities 

  • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
  • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
  • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
  • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


  • Prepare analysis and verification of product costs in support of special projects from the engineering group
  • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Qualifications:
  • Must have an Active DoD Secret Clearance
  • Excellent computer skills (EXCEL, PowerPoint, & Word).
  • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
  • 2 years of experience in estimating techniques or labor time standard development
  • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications 

  • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
  • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
  • Understanding of contractual agreements (FAR, TINA).
  • Strong analytical and planning skills
  • Excellent computer skills (MS Office Suite).
  • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
  • Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

Cyber Software Engineer

Description:
PDS Tech, Inc. is seeking am Cyber Software Engineer in Baltimore, MD.
Description: 

  • Roles and Responsibilities:
    Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met. Java and Nifi are highly desired.
     

Qualifications: Targeted Skills:
- Java and other high level development languages
- NiFi
- Linux OS
- Scripting Languages (Javascript, Perl, PHP, Python, Ruby, etc...)

Education: B.S. in Computer Science or other STEM field or 4 years of relevant software development/engineering experience in lieu of degree

Security Clearance: Active TS/SCI w/Polygraph

Desired Additional Skills/Backgrounds:
- Cyber Security
- RESTful
- Agile
- Jira
- C/C++
- Python
- Cloud (Apache Hadoop/AWS)
- Cloud development certification
- Spring
- Angular
- Test Automation
- Android app development
- UI/UX
- Database Administration
 
 
Job Number: 1910104515
Job Location: Annapolis, MD
Duration: 12 months
Input Date: 07/16/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTvLQAW&URLSource=cjhunter

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking an Electrical/Electronic Systems Engineer 3 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181534
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 09/09/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

•Leads work with customers to develop and document complex electronic and electrical system requirements.
•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
•Leads work to test and validate to ensure system designs meet operational and functional requirements.
•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
•Researches technology advances for potential application to company business needs.
•Makes recommendations for technology investments.
•Works under minimal mentorship.

EDUCATION:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182602
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Long Beach, CA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM
 
Job Number: 182329
Job Location: Long Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 10/11/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 02/13/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 5 for an opportunity in Oklahoma City, OK

RESPONSIBILITIES:
• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Works with other to develop program test strategies.
• Manages performance of critical suppliers to ensure system integration and compliance with requirements.
• Conducts program independent reviews and reports results to program leadership.
• Provides critical support of fielded hardware and software over the entire product lifecycle.
• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Works under consultative mentorship.

REQUIRED EXPERIENCE:
Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 182841
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/06/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

ELECTRICAL ASSEMBLER

Description:
Displays knowledge of Electrical Theory and usage of NEC and NFPA 79 in the assembly of machines with AC and DC circuits. Reads engineering drawings to assemble, rebuild, and repair electrical components.  Sets up and operates a variety of power tools (such as drill press, band saw and stud welder), to assist in the assembly of machines and components. Works unsupervised and provides training and cross-training to other employees. Coordinates with engineering personnel, and makes changes as required to update print packages.
ESSENTIAL DUTIES:
Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electrical equipment.
Assembles electrical components, sub-assemblies, and systems according to engineering drawings.  Positions and aligns parts in specified relationship to each other.  Mounts assembled components and attaches functional and cosmetic hardware such as caps, clamps and knobs.
Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures.
Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves.  Tests for proper sequencing of machine operations. Assists R & D technicians and engineering in developing new equipment.
Sets up and operates a variety of hand tools such as drill press, saws, shear and break.  Operates tow motor, pallet jack, hoist, pipe bender, pipe threader, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
Uses business system to enter time spent working on assemblies/sub-assemblies and to complete operations.
Uses PC to interface with programmable controllers and servo modules, transfer drive parameters and run diagnostics checks.  Must be able to manually load programs into electrical components.
Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in house testing and field installation of machinery.
Coordinates with engineering to ensure Engineering Change Requests are submitted.
Ensures that Engineering Change Orders are processed and assembled.
Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
Assists other departments to optimize throughput.
 
Completion of a Vocational Diploma in an electrical-related field, or equivalent experience or training. Must be computer literate and capable of reading engineering drawings.  Must have tools required to perform daily routines. Must be capable to set up and operate power tools.  Possesses basic knowledge of oscilloscope. Position requires a team player who is quality conscious, industrious and detail oriented. 

2nd shift Hours:  Mon-Thurs 2:25pm to 12:55am, 4-10's
3rd Shift Hours:  Mon-Thurs 9:30pm to 8:00am, 4-10's
 
 
Job Number: 1910107526
Job Location: Appleton, WI
Duration: 6 months
Input Date: 10/10/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fNb0QAE&URLSource=cjhunter

Elect Design and Analy Engr 2

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:

  • Maintains detailed requirements and specifications for various electronic products. Develops detailed designs of limited scope. Conducts various methods of testing and analysis to support design. Gathers data for technical performance measures and performs basic analysis. Provides basic engineering support throughout the lifecycle of the product. Conducts trade studies and literature research to support future product designs. Works under general supervision.
    Assignments may deal with

    • Reviewing supplier and partner qualification data.

    • Circuit Analysis/Layout/Design/Manufacturing.

    • FPGA design/development/integration.

    • Perform Trade Studies/Modeling.

    • Cross-functional coordination and integration.

    • Develop Design Requirements and Plans.

    • Provide Engineering Support to Supplier Management Procurement Activities.
     

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, com
 
Job Number: 1910109285
Job Location: OK City, OK
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Allyson Bright
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fWJkQAM&URLSource=cjhunter

Elect Design and Analy Engr 4

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 12+ Months

Description:
The Electronics Products Shared Integrated Product Group at The Client Company's Satellite Development Center in El Segundo, California is seeking an experienced electrical engineer whose area of expertise is electronics test and automated test system design. Our automated test systems include those designed for testing RF/microwave/millimeter-wave electronics, power electronics, and digital electronics for space applications. Units requiring automated test range from single-board computers to switching networks, modems, and microwave electronics used in space-based applications. The person in this position will be responsible for test system architecture definition, hands-on test development and test system design, verification, validation and documentation, as well as providing project management and leadership for less senior personnel.

Applicable skills for this position range from test software development to electronics hardware specification and design. Experience in control, analog, digital or power supply circuit design is desired. Software/coding experience using LabView, Test Stand, C/C#, Python, FPGA Verilog/VHDL, and Matlab Signal Processing is a plus. Understanding intermodulation distortion, phase noise, and spurious measurement test techniques and familiarity with S-parameters is also a plus. Strong writing and presentation skills are required.

Responsibilities:
- Leading design teams of 2 to 10 people in automated test system development activities with cost and project schedule accountability
- Development of test system requirements and verification methodologies
- Make recommendations for test equipment procurement
- Hands-on design, documentation and design leadership of automated test system development projects
- Lead STE design reviews showing adherence to STE development processes
- Supporting test system proposals and bids
- Resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage
- Participate in STE personnel development through mentoring and group presentations

Skill Code: 608-Elect Design and Analysis Engr-General

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 02/13/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Elect Design and Analysis Engr

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in El Segundo, CA.

Summary:

  • Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products.
  • Leads development of high-level and detailed designs consistent with requirements and specifications.
  • Leads reviews of testing and analysis activity to assure compliance to requirements.
  • Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.
  • Leads activities in support of Supplier Management with make/buy recommendations and other technical services.
  • Coordinates engineering support throughout the lifecycle of the product.
  • Plans research projects to develop concepts for future product designs to meet projected requirements.
  • Works under minimal direction.

Prerequisites:
  • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

 
Job Number: 1910108842
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/11/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fUCXQA2&URLSource=cjhunter

Election Day Field Techs

Description:
PDS Tech is seeking skilled computer and electronic technicians to work as Field Technicians for a 3 day project.

 
Rate/HR or Other$26/hour
Local or Non-Local ContractorLocal Contractor
Date Requested1/3/2020
Requested byTravis Kester, PM
(contractors should address any questions about this project to the requestor)Travis.kester@dominionvoting.com
 619.416.1783
ProjectSan Francisco March 2020 Consolidated Presidential Primary Election
Contractors Requested35 Field Techs (more if qualified and able), 6 Phone Coordinators
Siteseveral locations + San Francisco City Hall (for phone coordinators)
RoleField Technician (35+), Phone Coordinator (6)
DatesFriday 2/28 (coordinators), Saturday 2/29 (techs + coordinators), Tuesday 3/3 (techs + coordinators)
Hours/Days (Mon - Fri unless otherwise noted)Friday 2/28 (2pm – 5pm), Saturday 2/29 (1pm – 5pm), Tuesday 3/3 (all day, 6am – 9pm or later)
DVS On Site Lead/Customer ContactTravis Kester
Is overnight travel required?No
Will non-overnight travel expenses be reimbursed? (normal commute to and from work is not reimbursable)Yes, we provide rental cars and reimburse for gas mileage if tank needing to be filled + required parking fees (if any)
Will contractor be allowed to fly home on weekends if project lasts more than one week?n/a
Dress CodeBusiness Casual
Is heavy lifting required (over 50 lbs. individually)Lifting but not over 50 lbs.
Comment 
Other (hotel, parking, travel, etc.)Techs will be expected to travel from site-to-site in rental car & will be reimbursed for any parking/travel fees within job scope
Waive background check and drug screen?No
 (option for returning contractors only) Waived for returning contractors
For assistance with travel arrangements, please contactn/a
Is DVS timesheet requiredYes
DVS Timesheet ApproverTravis Kester
travis.kester@dominionvoting.com
619.416.1783
DVS Timesheet Backup ApproverNick Coudsy
Nick.coudsy@dominionvoting.com
323.351.9347
DVS Expense Report ApproverTravis Kester / PDS personnel
travis.kester@dominionvoting.com
619.416.1783

  • Minimum of 2 years customer service experience
  • Ability to lift up to 50lb
  • Must have valid driver's license and good driving record
  • Must have mobile phone

 
Job Number: 2010110688
Job Location: San Francisco, CA
Per Diem: No
Duration: 0 months
Input Date: 01/13/2020
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002feldQAA&URLSource=cjhunter

Electrical Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking a Electrical Design and Analysis Engineer 3 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

OKC Electronic Products Group is seeking experience electrical circuit design engineers. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.

Assignments may deal with

• Reviewing supplier and partner qualification data.
• Circuit Analysis/Layout/Design/Manufacturing.
• FPGA design/development/integration.
• Perform Trade Studies/Modeling.
• Cross-functional coordination and integration.
• Develop Design Requirements and Plans.
• Provide Engineering Support to Supplier Management Procurement Activities.
• Perform Engineering Investigations and Troubleshooting Efforts.
• Develop and perform Acceptance Test Procedures.
• Test Automation for aircraft modifications.

Other job responsibilities may include

• Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
• Develops high-level and detailed designs consistent with requirements and specifications.
• Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.
• Supports Supplier Management with make/buy recommendations and other technical services of limited scope.
• Provides engineering support throughout the lifecycle of the product.
• Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
• Works under general mentorship.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

WORK HOURS: 7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182607
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Electrical Design and Analysis Engineer 4 for an opening in Germantown, MD.

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 9:00 AM - 5:00 PM
 
Job Number: 184059
Job Location: Germantown, MD
Rate: $DOE
Duration: 12 Months
Input Date: 01/14/2020
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Electrical Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Electrical Design and Analysis Engineer 4 for an opening in Germantown, MD.

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 9:00 AM - 5:00 PM
 
Job Number: 184025
Job Location: Germantown, MD
Rate: $DOE
Duration: 12 Months
Input Date: 01/13/2020
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electrical Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking an Electrical Design and Analysis Engineer 4 for an opportunity in El Segundo, CA

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM


 
Job Number: 183427
Job Location: El Segundo, CA
Rate: $DOE
Duration: 10 Months
Input Date: 12/05/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electrical Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking 3 Electrical Design and Analysis Engineer 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182646
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/28/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Three Locations: Fort Worth, TX & Palmdale, CA & Marietta, GA
$64/hr
15 month W2 contract
First Shift
*DOD SECRET CLEARANCE HIGHLY PREFERRED*

Description:
ccepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.


Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.

Complete understanding and wide application of technical principles, theories and concepts, in the field. General knowledge of other related disciplines. Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.

Position may involve occasional travel and/or off-shift work.

Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: 11979
Job Location: Fort Worth, TX
Rate: 64.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 01/15/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Three Locations: Fort Worth, TX & Palmdale, CA & Marietta, GA
$64/hr
15 month W2 contract
First Shift
*DOD SECRET CLEARANCE HIGHLY PREFERRED*

Description:
Accepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.

Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.

Applies extensive technical expertise, and has full knowledge of other related disciplines. Develops technical solutions to complex problems which require the regular use of ingenuity and creativity.

Position may involve occasional travel and/or off-shift work.

Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: 11984
Job Location: Fort Worth, TX
Rate: 64.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15
Start Date: ASAP
Input Date: 01/15/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Littleton, CO
$62/hr
7 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Position Description
Researches designs develops and tests a variety of electronic equipment and systems including radar and radiation detection equipment; radio television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment. Company Special Test Equipment (STE) team that supports multiple programs across within LM Space, building test racks that checkout flight hardware prior to spacecraft integration. This position is for the Raptor Avionics Project.

Skills Required
- Experience developing circuit card/box Special Test Equipment.
* Experience performing integration and test of circuit card/box STE.
* Experience with PWB design, cable design, and/or board verification.
* Hardware/Software test experience.
* Experience deriving requirements and writing specifications based on system requirements.
* Experience with electrical test system implementation and troubleshooting activities

Skills Preferred
* Experienced with Zuken CR8000, Design Gateway (schematic capture) and Design Force (layout)
* Fast-paced development experience.
* Knowledgeable with electrical parts selection and parts procurement
* Comfortable with troubleshooting electronic circuitry and assemblies
* Experience presenting and communicating effectively to a broad technical community

Experience Required
4 + years work experience

Experience Preferred
Special Test Equipment Design for Avionics and or Power Systems for Flight Card, Module or Box level testing. Willingness to learn new environments, work independently in fast-paced development environment.

Education Required
Bachelor's degree Electronics or Electrical Engineering, Computer Engineering degree
 
Job Number: 11955
Job Location: Littleton, CO
Rate: 62
Per Diem: Split Possible
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 12/11/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
PDS Tech is seeking an Electrical Engineer, in Florence, SC.

Summary:

  • Responsible for wiring diagram creation and maintenance, as well as controller and field wiring design.
  • Utilize knowledge of power components, distribution and protection, and controls theory and application.
  • Provide product support for a variety of electronic elevator components and electrical systems.
  • Must possess at least a bachelor's or its equivalent in Electrical Engineering and at least five years of work experience in an Electrical Engineering field. In the alternative, at least a master's or its equivalent in Electrical Engineering and at least three years of work experience in an Electrical Engineering field would be acceptable.
  • Must also possess the following: working knowledge of power distribution, protection and control systems; experience with electrical codes and standards, understanding of power components, distribution and protection, controls theory and application; electrical engineering background with wiring diagrams, system analysis, motor and control applications; experience with ECAD tools such as Cadence, PSpice, ViewLogic, AutoCad, E3; experience working across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel; understanding of PCB assembly and other manufacturing processes; and experience with test and measurement equipment. Any suitable combination of education/training and/or experience would be acceptable.


 
Job Number: 1910097443
Job Location: Florence, SC
Duration: 12 months
Input Date: 12/10/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jennifer Morgan
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r8aGQAQ&URLSource=cjhunter

Electrical Engineer

Description:
Job Title: Electrical Engineer
Location: Riviera Beach, FL
Duration: 1 year with possible extension

Job Description: Researches, develops, designs, and tests electrical components, equipment, systems, and networks for underwater vehicles and systems.

This position requires experience in selecting and designing electronic assemblies. The position also entails requirements review, component selection, creation of design packages, and generation of test procedures.
The engineer will be responsible for supporting the design development through the release cycle. The position requires research, design, development, and testing of complex electrical designs including documentation development, hands-on test and troubleshooting, and formal documentation of the electrical design. Programs require broad electrical support, including issue resolution to distributed I/O architectures, RF systems, remote test station equipment, fiber optics interconnect, network troubleshooting, and power distribution systems. Work across disciplines
during integration and test activities is required. Experienced with underwater vehicles desired.
 
Job Location: Riviera Beach, FL
Rate: OPEN
Per Diem: YES
Overtime: YES
Duration: 1 Year
Start Date: ASAP
Input Date: 11/19/2019
Last Updated: 02/13/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: rchaudhary@iconma.com
Website: iconma.com

Electrical Engineer - Power

Description:
A Power/Electrical Engineer job in Anaheim, California is currently available through Belcan. This is a contract role with one of aerospace clients. You will be responsible for design and development of electrical power equipment for shipboard applications and design support of other applications. To be considered for this role, you will need to have a Bachelor of Science degree in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years experience in the design of power conversion equipment or related equivalent experience and/or training.

Power/Electrical Engineer Job duties:
* Provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment and systems under moderate supervision.
* Participate in all stages of development from design through manufacturing support and system integration.
* Interpret customer specifications to define requirements for power electronics circuit and systems design.
* Starting from conceptual phase, provide detail design of switch mode power converters and inverters, transformer rectifiers, control loops and/or magnetic components.
* Perform engineering analysis of power electrical circuits and systems.
* Perform hardware bring-up and integration and support power conversion systems hardware / software integration.
* Provide complete documentation, product verification and part\'s list.
* Write product and test specifications.
* Provide sustaining engineering on existing products supporting manufacturing and test departments.
* Provide technical support for manufacturing, production and fielded equipment.

Qualifications:
* Bachelor of Science degree (B. S.) in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years\' experience in the design of power conversion equipment or related equivalent experience and/or training.
* Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
* Circuit analysis applications, PSPICE preferred.
* Magnetics design and closed control loop design experience, a plus.
* Must be able to work as a key member of the design team with other Power Design Engineers, Digital and Analog Engineers, System Engineers and Software Engineers.
* Proven effective communication with Senior Project Management and customer representatives is essential.

If you are interested in this Power/Electrical Engineer job in Anaheim, California, please apply via the \'apply now\' link provided.  Belcan is a leading provider of qualified personnel to many of the world\'s most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298328
Job Location: Anaheim, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2020
Last Updated: 02/16/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: Texas
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=298328&job_number=298328

Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/19/2019
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167093 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2657-1
Max Pay Rate: $90.00/hr M
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Responsible for performing pre-flight of aircraft instrumentation.

Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

- Analog and digital circuit design and analysis.
- Signal conditioning, transducers, and data acquisition.
- Ability to interpret electrical drawings.
- Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
- Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
- CATIA, CCD, AutoCAD or similar design tools.
- Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
- Microprocessor firmware design and embedded system design
- Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
- Flight test instrumentation protocols and standards
- GPS and IRIG time standards
- Real time and post test data processing Flight Test Experience
- Proficient communication skills

Qty 2 positions
 
Job Number: JE-2657-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Engineer in El Segundo, CA

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 10+ Months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 676-Digital and Analog Circuits and Pwr Supply Design
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 10 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 02/13/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Instrumentation Design Engineer W/ Secret Clearance

Description:
This is a full time, 14 month contract position located in Lancaster, CA*



We are hiring for an Electrical Engineer who will be designing, analyzing and testing military aircraft instrumentation responsible for instrumentation modification via T2 Mod process for F22’s. Daily work will consist of troubleshooting instrumentation installations utilizing electrical drawings and providing modification to electrical drawings utilizing Visio/Catia.



Required;
*8 years’ experience in instrumentation designing including analog/digital circuit design and analysis.
*Strong experience in supporting fast paced flight test programs; knowledge of Signal conditioning, transducers, and data acquisition.
*Experience using CATIA, CCD, AutoCAD or other design tools; able to read drawings.
*knowledge of Lockheed Aero Flight Test Instrumentation processes, procedures, and tools.
*Real time and post test data processing Flight Test Experience
*Active Secret Clearance



Pluses:
*knowledge of Lockheed Aero Flight Test Instrumentation processes, procedures, and tools.
*Familiar with electronics troubleshooting using including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, etc.
*Microprocessor firmware design and embedded system design
*Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
*Flight test instrumentation protocols and standards; GPS and IRIG time standards
 
Job Number: 038
Job Location: Lancaster, CA
Rate: $90.00
Per Diem: yes split
Input Date: 02/07/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electrical Systems Design Engineer 4 - Power Systems

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

•Leads work with customers to develop and document complex electronic and electrical system requirements.
•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
•Leads work to test and validate to ensure system designs meet operational and functional requirements.
•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
•Researches technology advances for potential application to company business needs.
•Makes recommendations for technology investments.
•Works under minimal mentorship.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 374235
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 02/17/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design and Analysis Engineer 5

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:
  • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    Other job responsibilities may include
    • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Works with other to develop program test strategies.
    • Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conducts program independent reviews and reports results to program leadership.
    • Provides critical support of fielded hardware and software over the entire product lifecycle.
    • Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Works under consultative mentorship.

     

Basic Qualifications (Required Skills and Experience)

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

 
 
Job Number: 1910108677
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJWQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Edwards AFB CA

Description:
166690
Job Title: Electrical Technician

Work Site Address: Palmdale, CA 93599
Job Number: 2504-1
Max Pay Rate: $32.64/hr
Start Date: 12/16/2019
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2504-1S
Job Location: Edwards AFB, CA
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Nellis AFB NV

Description:
166689
Job Title: Electrical Technician

Work Site Address: Las Vegas, NV 89191
Job Number: 2505-1
Max Pay Rate: $32.64/hr
Start Date: 11/5/2019
End Date: 5/20/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.


Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
Work location is Nellis AFB
 
Job Number: JEG-2505-1S
Job Location: Nellis AFB, NV
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 02/03/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Engineer

Description:
*This is a full time, 1 year contract position located in York, PA*

*Alternate locations available to work from, Minneapolis or San Jose*

*Per diem split is available for out of the area applicants*



We are seeking a contract Electrical Engineer specializing in vehicle electronics and wire harness designing. We are working on optimizing the design the wiring harnesses and cable assemblies which will integrated into military ground vehicles, such as tanks and armored personnel carriers.



Daily duties will consist of specifying/design of components from requirements and work on through modeling, simulation and analysis or test that requirements are met. Will work on creating engineering documentation (specs, ICDs, design documents, and technical/test reports) and complete technical data packages. Handle cost estimating, scheduling assigned electrical design projects; work on ECOs and change proposals as well as monitoring to ensure manufacturing, and delivery of components schedules are met. Applicant will assist drafters / designers in creating clear and releasable documents.



Required:
*3 years’ experience designing electrical & wire harnesses systems for military vehicles.
*Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
*Understanding of military electrical connectors and cabling specs such as SAEJ1939 CANBus/CANalyzer.

*Familiar with C4ISR equipment and vision enhancement systems including cameras and displays.

*Working knowledge of vehicle positioning systems.

*Experience using electrical test equipment including oscilloscopes, meters, power supplies.
*Knowledge of MIL-STD 1553,MIL-STD 100

*4 year degree in Engineering





Pluses:
*Experience integrating military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
 
Job Number: 314
Job Location: Sterling Hts, MI
Rate: DOE
Per Diem: yes split
Input Date: 02/07/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electrical/Electronic Installation Design

Description:
PDS Tech, Inc. is seeking an Electrical/Electronic Installation Design, in Tukwila, WA.

Summary:

  • Provides guidance in the development of cable/wire harness detail and assembly designs.
  • Provides guidance in the development of electrical product detail, assembly and installation designs.
  • Provides direction used by multiple teams to analyze complex results and performs design reviews.
  • Provides guidance in engineering design disposition on discrepancies.
  • Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
  • Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
  • Directs the technical review of supplier capabilities to facilitate source selection.
  • Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
  • Works under consultative direction.

Basic Qualifications 

  • (Required Skills and Experience):14 or more years of designing or supporting electrical wire harness Installations
  • Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications

  • (Desired Skills/Experience):Active security clearance is preferred
  • Defense Experience preferred but not required

 
Job Number: 1910110207
Job Location: Seattle, WA
Duration: 6 months
Input Date: 12/23/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Erin Singer
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fbLeQAI&URLSource=cjhunter

Electronic Systems Design & Analysis Engineer 3 - 374149

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374149
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 02/17/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/24/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

In your role, you will:
  • Assemble fabricated aircraft parts at floor stations.
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
Qualifications:
  • Fine pitch soldering experience is required. (watch maker certifications)
  • 4 years experience in electronics assembly.
  • High School Diploma required.
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
 
 
Job Number: 1810083538
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 12/04/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician - 2nd Shift / component level testing - no clearance FL

Description:
167171 Job Title: Electronics Technician

Work Site Address: Clearwater, FL 34677
Job Number: 2894-1
Max Pay Rate: $26.00/hr
Start Date: 1/13/2020
End Date: 11/20/2020
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Adjusts and calibrates systems as required. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures.

Troubleshoots to the component level. Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. Requires a strong knowledge of Solid State devices and micro-circuitry. Works in a dynamic production environment and is able to produce at a high level in support of customer schedules. Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards, signal generators, and RF Power Meters.

Qualifications and Education Requirements
Basic Qualifications :
1 year of direct experience
Proficient in component level troubleshooting of solid state, digital, and RF circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.

Desired skills :
RF component level troubleshooting
Spea Flying Probe experience
ICT experience
Familiarity with Radar Systems

Typical Minimums :
High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.
- Radio Frequency troubleshooting experience is desired
- Testing to the component level of electronic components
- Must be willing to work overtime

Skills: Category Name Required Importance Experience
Technical Skills Basic Computer Skills Yes 5 2 - 4 Years
Technical Skills Radio Frequency (RF) No 5 2 - 4 Years

Qty 3 position
This is a 2nd Shift position.
*The supervisor is in urgently in need of new resumes*
 
Job Number: LMRMS-2894-1
Job Location: Oldsmar, FL
Rate: 26/hr max
Duration: 10 months
Input Date: 01/08/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrophysics Engineer/Scientist 4

Description:
Chipton-Ross is seeking 3 Electrophysics Engineer/Scientist 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with
•Reviewing supplier and partner qualification data
•Nuclear Hardening analysis and test
•EMI/C analysis and test
•EMSEC/TEMPEST analysis and test
•HIRF/Lightning analysis and test
•RF Co-Site analysis
•Antenna Coupling analysis
•Electrical Power Quality and Load analysis
•Test Automation for aircraft modifications

Other job responsibilities may include:
•Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
•Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
•Develops architectures to integrate systems and components into higher level systems and platforms.
•Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
•Defines and conducts tests to validate performance of designs to requirements.
•Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
•Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
•Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
•Writes appropriate sections of proposals to support development of new business.
•Works under general direction.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182605
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

Description:
**Requires the ability to obtain Secret Clearance**

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

Other job responsibilities may include
•Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
•Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
•Develops architectures to integrate complex systems and components into higher level systems and platforms.
•Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
•Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
•Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
•Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
•Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
•Generates major sections of proposals to support development of new business.
•Works under minimal mentorship.

OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

•Reviewing supplier and partner qualification data
•Nuclear Hardening analysis and test
•EMI/C analysis and test
•EMSEC/TEMPEST analysis and test
•HIRF/Lightning analysis and test
•RF Co-Site analysis
•Antenna Coupling analysis
•Electrical Power Quality and Load analysis
•Test Automation for aircraft modifications.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374234
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 02/17/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrophysics Engr/Scien 4

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

Summary:

  • Reviewing supplier and partner qualification data.
  • Nuclear Hardening analysis and test.
  • EMI/C analysis and test.
  • EMSEC/TEMPEST analysis and test.
  • HIRF/Lightning analysis and test.
  • RF Co-Site analysis.
  • Antenna Coupling analysis.
  • Electrical Power Quality and Load analysis.
  • Test Automation for aircraft modifications.

Other job responsibilities may include:

  • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate complex systems and components into higher level systems and platforms.
  • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
  • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Generates major sections of proposals to support development of new business.
  • Works under minimal mentorship.

Prerequisites:
  • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
  • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
  • Must possess good organizational, interpersonal, and problem solving skills.
  • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
  • Ability to adjust priorities to multiple demands and unanticipated events.
  • Highly motivated and must work well in a team environment.
  • The ability to communicate effectively, both verbally and in writing.

Preferred Qualifications:

  • Active U.S. Security Clearance.
  • Previous experience in the defense or aerospace industry.
  • Previous experience in Electrical Effects.

 
Job Number: 1910108236
Job Location: OK City, OK
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQVrQAM&URLSource=cjhunter

Electrophysics Engr/Scien 5

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

Summary:

  • Reviewing supplier and partner qualification data.
  • Nuclear Hardening analysis and test.
  • EMI/C analysis and test.
  • EMSEC/TEMPEST analysis and test.
  • HIRF/Lightning analysis and test.
  • RF Co-Site analysis.
  • Antenna Coupling analysis.
  • Electrical Power Quality and Load analysis.
  • Test Automation for aircraft modifications.

Other job responsibilities may include:

  • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate multiple systems into higher level systems and platforms.
  • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
  • Develops new and improved modeling and simulation techniques.
  • Leads development and execution of critical tests to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Creates new tools to improve management of projects.
  • Leads development of major sections of large-scale proposals to support development of new business.
  • Works under consultative mentorship.

Prerequisites:
  • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
  • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
  • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
  • Must possess good organizational, interpersonal, and problem solving skills.
  • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
  • Ability to adjust priorities to multiple demands and unanticipated events.
  • Highly motivated and must work well in a team environment.
  • The ability to communicate effectively, both verbally and in writing.

Preferred Qualifications:

  • Active U.S. Security Clearance/TS is a plus.
  • Previous experience in the defense or aerospace industry.
  • Previous experience in Electrical Effects.

 
Job Number: 1910108675
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJCQA2&URLSource=cjhunter

Electrophysics Engr/Scien 5

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in El Segundo, CA.

Position Responsibilities:

o Design and development projects for state-of-the art MMIC/RFIC electronics for communication systems and space-based applications.

o Design responsibilities for high power, high efficiency MMIC power amplifiers.

o Activities and duties will include RF circuit design, requirements and interface definition, modeling and analysis, hands-on testing, performance and design verification.

o Solve anomalies that occur during integration and test, as well as support external sub-contractors in development of articles to be delivered to the Satellite Development Center.

o This position will report to the manager of Microelectronics in the Space Electronics Capability organization.


 
Basic Qualifications :

o This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

o Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry

o Industrial experience designing and delivering custom MMICs and/or RFICs to production programs.

o Experience in the design and delivery of high efficiency, high linearity power amplifiers required.

o Experience designing custom MMICs in Gallium Arsenide (GaAs) and Gallium Nitride (GaN) semiconductor technologies.

Preferred Qualifications (Desired Skills/Experience):

o Demonstrated technical experience in the field of RF electronics and MMIC/RFIC circuit design.

o Additional experience in the design of RF systems or subsystems and the ability to decompose RF system requirements to MMIC and RFIC requirements is desired.

o Experience with RF/MMIC circuit design in SiGe RFIC components.

o Experience in ECAD tools; including Microwave Office or ADS, Ansys HFSS, Sonnet, and Axiem, etc.

o Experience in non-linear FET modeling and load-pull measurements.

o Experience Microwave/millimeter-wave and Printed Circuit Board design (PCB) and Microwave packaging.
 
Job Number: 1910109019
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fV3QQAU&URLSource=cjhunter

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

FAA Technician - Electronic - Level 2

Description:
PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • Ability to READ SCHEMATICS a PLUS- To diagose and repair circuitry
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 2-4 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS - Fine Pitch, Surface Mount and/or Through hole
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.
  •  
  • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st, 2nd or 3rd shift.
  • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
  • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

Please send your resume to mmarquez@pdstech.com today!!
 
Job Number: 1910109061
Job Location: Olathe, KS
Duration: 6 months
Input Date: 11/11/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fVDRQA2&URLSource=cjhunter

FPGA / RTL Hardware Engineer

Description:
*This is a full time, 1 year contract to hire position located in Nashua, NH*



We are seeking an electronic hardware engineer who will support and develop FPGA/RTL designs from design to system integration (design, test, troubleshoot) for embedded military/aerospace analog/digital/mixed signal multi-layer circuit card assemblies/applications.



Candidate duties will include RTL coding, VHDL synthetization placement and routing. For the work, Xilinx Vivado and possibly Altera, Microsemi, Lattice FPGAs will be used. Candidate will be responsible for their design, update/create the specs, and create the RTL design (from bottom up) or from a leveraged code block. Candidate will make a standalone testbench for the design to test basic functionality before handing it off the Design Verification team for detailed testing. Once complete, the designed product will go to the lab for testing and debugging.



Required:
*10 years of FPGA or ASIC digital circuit design in RTL/VHDL (RTL designers also considered)
*Experience with Source Control Tools/Bug Tracking; experience working in a lab environment
*Experience with lab Integration, debug, root cause analysis, lab tools.
*BSEE or equivalent
*Active Secret Clearance



Pluses:
*Xilinx Vivado Verilog or System Verilog
*Linux, GIT Bug Tracking tool such as GForge or JIRA
*FPGA verification and validation
*Testing of VHDL source code, DSP PCIE
*Serial interfaces (MIL-STD-1553, ARINC-429, RS422, RS485, etc), backplane buses including VME, PCI, PCIE
 
Job Number: 562
Job Location: Nashua, NH
Rate: $104.00
Per Diem: yes split
Input Date: 02/07/2020
Last Updated: 02/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 6 Fabrication Specialist A's located in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
3:30 PM - 12:00 AM
 
Job Number: 180163
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 07/02/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Admin

Description:
Facilities Project Admin

Job ID # 2020-10550

Contract Opportunity

Location: Hazelwood, MO

Industry: Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 6 years

 

What You’ll Do:

Evaluates for major projects, contractor proposals for fair and reasonable cost.
Administers contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures.
Provides guidance to less experienced employees.
Obtains facilities design and resources commitments for major projects.
Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates.
Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan.
Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits.
Finalized work package will provide documents to implement the project.
Provides guidance to less experienced employees.
Evaluates requests and meet with customer to define requirements for major projects.
Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements.
Creates layouts and conceptual designs.
Ensures compliance with Boeing and regulatory standards such as city, county, state, federal.
Develops options so that facilities modifications are accomplished within project objectives.
Works with affected parties to define functionality and constructability.
Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis.
Negotiates options with customer to select the best solution for customer and company.
Provides guidance to less experienced employees.
On major projects, ensures completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings.
Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities.
Provides guidance to less experienced employees.
On major projects, monitors and coordinate implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews.
Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents.
Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements.
Provides guidance to less experienced employees.
Receives customer requests for major facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods.
Validates against acceptance criteria for new requests and acknowledges customer requests.
Logs requests into work management system in order to document, track, and perform work.
 

 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s degree combined with 6+ years of relevant work experience; Master’s degree combined with 4+ years of relevant experience; or equivalent combination of education and experience.

 

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2020-10550
Job Location: Hazelwood, MO
Input Date: 01/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Facilities Project Administrator 3

Description:
Chipton-Ross is seeking 3 Facilities Project Administrator 3's located in Hazelwood, MO.

RESPONSIBILITIES:
Evaluates for major projects, contractor proposals for fair and reasonable cost. Administers contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Provides guidance to less experienced employees. Obtains facilities design and resources commitments for major projects. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits. Finalized work package will provide documents to implement the project. Provides guidance to less experienced employees. Evaluates requests and meet with customer to define requirements for major projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer''s requirements. Creates layouts and conceptual designs. Ensures compliance with Boeing and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Provides guidance to less experienced employees. On major projects, ensures completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Provides guidance to less experienced employees. On major projects, monitors and coordinate implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Provides guidance to less experienced employees. Receives customer requests for major facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Logs requests into work management system in order to document, track, and perform work.

EDUCATION:
Accredited Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).

WORK HOURS:
Full-Time/First Shift
7:00 am - 3:30 pm.

MISCELLANEOUS:
The candidate selected to fill this assignment must successfully pass a credit check performed by the client.


 
Job Number: 183989
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 months
Input Date: 01/10/2020
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: LaVada Pulley
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lpulley@chiptonross.com
Website: www.chiptonross.com

Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Flight Test Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience executing test procedures onboard experimental fixed wing test aircraft.
3. Experience performing analysis of post flight data to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
4. Flight Test Engineer Certification may offset one year of experience requirement.

Position Purpose:
1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
5. Definition of the aircraft configuration to support the on aircraft test.
6. Tracks test points and updates pass/fail/repeat status.
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight.
9. Processing of data following a test flight to document test results.
10. Development of flight test reports to show compliance with test requirements.
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
14. Conducts flight test brief with flight ops and engineering.
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
16. Generates and transmits post flight test summary.
17. Conducts debrief of test mission with test crew and engineering.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Perform other duties as assigned.

Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12036
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 02/07/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Flight Test Engineer

Description:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Unique Skills:
• Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
• Experience executing test procedures onboard experimental fixed wing test aircraft
• Experience performing analysis of post flight data to determine pass/fail

Essential Functions:
• Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
• Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
• Work with engineering and test pilots to define test points that are conducted on test aircraft
• Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
• Definition of the aircraft configuration to support the on aircraft test
• Tracks test points and updates pass/fail/repeat status
• Supports on aircraft ground/flight testing as required.
• Provides the judgment on acceptable test data during or post flight
• Processing of data following a test flight to document test results
• Development of flight test reports to show compliance with test requirements
• Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
• Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
• Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
• Conducts flight test brief with flight ops and engineering
• Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
• Generates and transmits post flight test summary
• Conducts debrief of test mission with test crew and engineering

Education and Experience Requirements:
• Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
 
Job Number: 24-378
Job Location: Savannah, GA
Rate: $55-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed-wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed-wing test aircraft
Experience performing analysis of post-flight data to determine pass/fail

We post all current job openings at www.hi-tecsolutions.com/jobs
 
Job Number: 148303
Job Location: Savannah, GA
Rate: 70.00 hrly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 01/09/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 01/09/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Flight Test Instrumentation Engineer

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


Responsibilities
 
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations  and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Required:
  • Bachelor degree along with a minimum of 1 year of flight test operations experience
    • -Or-
    • A minimum of 5 years of experience in flight test operations in lieu of the degree



  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to quickly learn new software and systems
  • Must be capable and comfortable working within a diverse team environment
  • Strong oral, written, and presentation communication skills

Desired: 

  • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
  • Experience in design of instrumentation installation of sensors, wiring and equipment
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
  • Knowledge of flight test operations and certification requirements.
  • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


 
 
Job Number: 1910108505
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

Flight Test Spec I - Flight Test Engineer

Description:
PDS Tech is seeking an Flight Test Spec I - Flight Test Engineer for an open position in Savannah, GA.
 

Position Purpose:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of aircraft products and services.

Principle Duties and Responsibilities:

Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
3. Work with engineering and test pilots to define test points that are conducted on test aircraft
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
5. Definition of the aircraft configuration to support the on aircraft test
6. Tracks test points and updates pass/fail/repeat status
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight
9. Processing of data following a test flight to document test results
10. Development of flight test reports to show compliance with test requirements
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
14. Conducts flight test brief with flight ops and engineering
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
16. Generates and transmits post flight test summary
17. Conducts debrief of test mission with test crew and engineering

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities Perform other duties as assigned.



 


Education and Experience Requirements:


Job Description


Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.



Unique Skills:

  • Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
  • Experience executing test procedures onboard experimental fixed wing test aircraft
  • Experience performing analysis of post flight data to determine pass/fail


Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 2010110562
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/10/2020
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fe9zQAA&URLSource=cjhunter

Forms Management Specialist

Description:
Chipton-Ross is seeking 3 Forms Management Specialists located in Mesa, AZ

RESPONSIBILITIES:
The Forms Management team helps employees across client create, access, understand, harness, manage, and disseminate information. They optimize the latest developments in information management strategies to support client innovation and competitiveness, delivering high quality, cost effective solutions on a global scale. The Forms Management Specialist will provide forms analysis, design and development, documentation, testing, and technical support using Adobe products and possibly ServiceNow tool in the near future.
• Designs and maintains dynamic electronic forms utilizing advanced scripting techniques and workflow processes
•Develops or customizes workflow applications to streamline business partner processes
• Consults with process owners or process teams to analyze requirements and makes recommendations that utilize capabilities of development software and reduce manual processing
• Utilizes configuration management tools, design tools, debugging tools, and any other environment specific tools necessary to create, test, and implement an application
• Integrates workflow processes with various data sources
• Shares knowledge with peers and recommends changes to common tools
• Develops Information Management Designer training materials
• Delivers end-user training and Forms website content, as required
• Provides mentoring and guidance to junior peers
• Supports the integration with associated Information Management lifecycle functions, business process architecture and Enterprise information system architecture
•Develops and configures business process automations per low level design and technical design documentation to meet defined requirements. Comply with and help to enforce design and coding standards, policies, and procedures. Ensure quality of coded components by performing thorough testing.

EDUCATION:
Accredited Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM
 
Job Number: 183789
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 12/23/2019
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Instrumentation Engineer

Palmdale, CA
$100/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
Instrumentation Engineer
The selected candidate will be responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

The candidate will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Must be a US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position, an active Secret security clearance.

Basic Qualifications
* Bachelor's degree in Electrical/Electronics or Computer Engineering or related discipline.
* Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
* Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
* Using various CAD programs such as Catia, Autocad, etc.
* Using general test equipment such as oscilloscopes and spectrum analyzers.
* Understanding of IRIG 106
* Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
* GPS and IRIG time standards
* Video protocols and compression

The applicant must have excellent organizational and communications skills
* Applicant should have knowledge of Systems Engineering practices and concepts
* Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
* Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
* Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus
 
Job Number: 11930
Job Location: Palmdale, CA
Rate: 100.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Instrumentation Engineer

Edwards AFB, CA
$90/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description:
Instrumentation Engineer for F-22 CTF at Edwards AFB, CA. Responsible for performing preflight of aircraft instrumentation. Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this position an active Top Secret security clearance, with a current background investigation, is preferred.

SUCCESSFUL APPLICANT MUST REPORT TO WORK WITH REQUISITE DOD CLEARANCE.

Must be a US Citizen, this position is located at a facility that requires special access. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. This position requires a Secret Clearance to start.

- Analog and digital circuit design and analysis.
- Signal conditioning, transducers, and data acquisition.
- Ability to interpret electrical drawings.
- Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
- Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
- CATIA, CCD, AutoCAD or similar design tools.
- Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
- Microprocessor firmware design and embedded system design
- Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
- Flight test instrumentation protocols and standards
- GPS and IRIG time standards
- Real time and post test data processing Flight Test Experience
- Proficient communication skills
 
Job Number: 11925
Job Location: Edwards, CA
Rate: 90.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Legal Administrator

Description:
Legal Administrator

Job ID # 2020-10548

Contract Opportunity

Location: Chicago, IL

Industry: Defense

Clearance Requirement:

Minimum Education: High School Diploma / GED

Minimum Experience: 4 years

 

What You’ll Do:

Triage and organize all forms of communication as desired including incoming calls, messages and correspondence received.
Coordinate and process domestic and international business travel arrangements.
Monitor designated business traveler’s logistics and generate expense reports.
Act as liaison and facilitate communications between the law department and clients, assess urgency of situation and determine appropriate action.
Generate, revise, proofread letters, presentations, and correspondence.
Verbally and electronically communicate a wide variety of information to multiple audiences.
Review, assess, prioritize monitor status of pending items, follow up and keep attorney/staff informed.
Manage calendars, coordinate meetings, teleconferences, WebEx meetings and conferences.
Handle appropriately communications of a sensitive and confidential nature.
Maintain files and correspondence using accepted legal office practices and company record keeping systems and procedures.
Process invoices, track department budgets and generate reports using spreadsheets and internal legal matter management system.
Reconcile corporate credit card charges to ensure timely and accurate reimbursement.
Coordinate with the appropriate focal(s) to support the acquisition and maintenance of resources. Order and maintain office supplies.
Plan and implement logistics for executive level internal and external events.
Provide back-up assistance to other Legal Administrators as needed.
 

 

What You’ll Need:

Experience providing administrative support to multiple customers such as executives, managers and staff members.
Extensive work experience using Adobe Professional and Microsoft Office products including Outlook, PowerPoint, Excel, and Word.
Must have a demonstrated ability to work under limited supervision in a fast-paced environment, and perform multiple work assignments concurrently, often within a short period of time.
Must have a positive, flexible, and team-oriented attitude.
Experience making domestic and international travel arrangements and generating expense reports preferred.
Experience in schedule management and travel or event planning preferred.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High school diploma / GED combined with 4+ years of relevant experience.
 

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2020-10548
Job Location: Chicago, IL
Input Date: 01/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Legal Administrator C

Description:
Chipton-Ross is seeking a Legal Administrator C for an opportunity in Chicago, IL

RESPONSIBILITIES:
• Triage and organize all forms of communication as desired including incoming calls, messages and correspondence received.
• Coordinate and process domestic and international business travel arrangements.
• Monitor designated business traveler’s logistics and generate expense reports.
• Act as liaison and facilitate communications between the law department and clients, assess urgency of situation and determine appropriate action.
• Generate, revise, proofread letters, presentations, and correspondence.
• Verbally and electronically communicate a wide variety of information to multiple audiences.
• Review, assess, prioritize monitor status of pending items, follow up and keep attorney/staff informed.
• Manage calendars, coordinate meetings, teleconferences, WebEx meetings and conferences.
• Handle appropriately communications of a sensitive and confidential nature.
• Maintain files and correspondence using accepted legal office practices and company record keeping systems and procedures.
• Process invoices, track department budgets and generate reports using spreadsheets and internal legal matter management system.
• Reconcile corporate credit card charges to ensure timely and accurate reimbursement.
• Coordinate with the appropriate focal(s) to support the acquisition and maintenance of resources. Order and maintain office supplies.
• Plan and implement logistics for executive level internal and external events.
• Provide back-up assistance to other Legal Administrators as needed.

REQUIRED EXPERIENCE:
- Experience providing administrative support to multiple customers such as executives, managers and staff members.
- Extensive work experience using Adobe Professional and Microsoft Office products including Outlook, PowerPoint, Excel, and Word.
- Must have a demonstrated ability to work under limited supervision in a fast-paced environment, and perform multiple work assignments concurrently, often within a short period of time.
- Must have a positive, flexible, and team-oriented attitude.
- Experience making domestic and international travel arrangements and generating expense reports preferred.
- Experience in schedule management and travel or event planning preferred.

EDUCATION:
Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
Start Time: 8:00 AM
End Time: 5:00 PM

MISCELLANEOUS:
The candidate selected to fill this assignment must successfully pass a credit check performed by the client.

 
Job Number: 183987
Job Location: Chicago, IL
Rate: $DOE
Duration: 3 months
Input Date: 01/10/2020
Last Updated: 02/17/2020
Firm Name: CHIPTON ROSS
Attention: Silmese Graves
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: sgraves@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Tech II

Description:
Nesco has two open positions for Industrial Maintenance Technicians at the Northwest Dallas Plant. These positions will be full-time positions with benefits. Please see the description below for the position either 1st or 2nd Shift.



The Maintenance Technician II is responsible for the support of production equipment and other facility assets. This Technician must be able to perform preventative maintenance, troubleshoot, maintain and repair operating equipment during production and breakdowns. In addition, the Maintenance Technician will work with others to achieve plant business objectives of safety, productivity, customer service, quality, cost and environmental protection.

  • Troubleshoots production equipment and mechanical failures, repairs and performs preventive maintenance (PM) as required to ensure equipment reliability

  • Assists Operations, Quality and Engineering teams with root cause analysis for 5 Why's, Change management, Incident Management, and Non-Conformances to identify reasons for incident causes

  • Works with operators and support production and transfer skills to other technicians

  • Supports the daily operations of Planned Maintenance, Autonomous Maintenance, Corrective, Maintenance, and Preventive Maintenance, Predictive Maintenance standards while working with teams, focus priority, and plant directives.

  • Accurately and fully completes all regulatory and compliance-related documentation and procedures

  • Work with teams to fabricate machine parts as needed and responsible for shop cleaning and 6S

  • Understand and comply with company policies on safety standards

  • Helps maintain spare parts inventory and restocking inventory for the plant as needed

  • Ensures completion of work orders as scheduled and document in CMMS in a timely manner.

  • Reviews equipment instructions, blueprints, electrical, and pneumatic schematics to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem, and possible solutions such as part redesign, substitution of material or parts, or re-engineering of parts or subassemblies


Education Required:

HS Diploma or GED Equivalent

Work Experience Required:


  • Minimum of 5 years of industrial maintenance experience required

  • Mid to high level break-fix & preventative maintenance experience required

  • Strong knowledge of Fanuc, Mitsubishi and Allen Bradly controls

  • Experience with advanced PLC, and/or robotics, and CNC repair required

  • Experience in wrench forge a plus

  • Skills & Knowledge Required:

  • Ability to analyze, troubleshoot and perform repairs

  • Understands electrical, mechanical, fluid power and control systems

  • Understand Ohms law, voltage availability

  • Understand electrical; 460 VAC 3-phase and 110 VAC control sources as far as determining power

  • Knowledge of controls and PLC troubleshooting

  • Demonstrated ability to perform electronic, mechanical and hydraulic repairs used in electrical and mechanical maintenance technician work assignments

  • Must be able to use basic hand tools and specialized tools as appropriate

  • Basic Microsoft Office knowledge and/or Computerized Maintenance Management System (CMMS) knowledge desired

  • Excellent verbal/written communication and customer service skills

  • Additional traits and competencies that define the successful candidate are:

  • Team player attitude that is a highly disciplined, problem-solver with a strong work ethic

  • Physical Demands and Work Environment:

  • Regularly required to stand, walk, reach, stoop, kneel, crouch, and use hands

  • Required to lift and/or move 10 lbs regularly and up to 33 lbs occasional

  • Regularly exposed to moving mechanical parts, strong fumes, loud noises, and occasionally extreme temperatures




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-49535
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-01 00:00:00.0
Start Date: 2019-12-31 00:00:00.0
Input Date: 12/19/2019
Last Updated: 01/30/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Burnsville, MN
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages high complexity design and planning of layout for assembly and materials handling. Adaptation of machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

Candidates will support work transfer project to India. Project scope includes baselining current processes, implementation of corrective actions, and related fixture design. Additional duties to include support of legacy product lines. Legacy lines include, aircraft wipers, video systems, and electronic sub systems.

Desired qualifications:
Experienced manufacturing engineer capable in process design, work instruction creation and fixture design. Candidate must have good interpersonal skills and be self-motivated. Experience in Aerospace engineering is desired, but not required. Proficiency in SAP, Team center, CREO desired
 
Job Number: 12025
Job Location: Burnsville, MN
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/08/2020
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer Level 2

Description:
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.

Desired:
Experienced with SAP Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel). Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming. Strong written and verbal communication skills. Knowledge of Lean manufacturing concepts and techniques, Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts Leadership experience Experience in a Manufacturing environment

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) Years Mandatory(Yes/No)
1 2 3 4 5

Work Instruction Development Development of Work Manufacturing Instructions for CCA or C&H build in SAP. 3 0-3 Years Yes
Hardware Process Development CCA, ECA, and/or C&H 3 0-3 Years Yes
Direct Production Support Provide direction and training to hourly production workers 5 0-3 Years Yes

Special Needs
Category Description Recurring Frequency Mandatory
Training SAP No N/A No
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
 
Job Number: 19-16599
Job Location: Ocala, FL
Per Diem: Possible
Overtime: Yes
Duration: 6 Months
Input Date: 12/12/2019
Last Updated: 02/13/2020
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: snegi@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 4-Tukwila

Description:
Manufacturing Planner 4

Location: Tukwila, WA
Duration: 6 Months

Description:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.

Education / Experience:
A degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 67E-Structures
 
 
Job Number: 20-00899
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 2/10/20
Input Date: 01/22/2020
Last Updated: 01/28/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Supervisor| Direct Hire

Description:
Nesco Resource has an exciting opportunity for the right candidate!



We're seeking a responsible candidate with 5+ years of experience to join our client's Manufacturing Team a fast-growing medical device company.



Open work environment, Team-based, and fast-paced.



Job Details:

Packaging Department


Openings: 1

Title: Packaging Supervisor

Location: Addison, Tx




Job Summary: The packaging supervisor is responsible for overseeing the packaging of medical devices in accordance with Standard Operating Procedures and product specific methods. These responsibilities include the supervision, guidance and evaluation of packaging personnel in accordance with our client's procedures and policies.



Duties and Essential Job Functions:

  • Supervise and perform packaging of medical devices to controlled specifications and processes

  • Supervising and documenting packaging operations as required

  • Assigns work schedules and ensures efficient production coverage by assessing available of appropriate Team Members (i.e. daily staffing, PTO, scheduling, training matrix, etc.) and notify Team Leads / Dept. Manager of conflicts as needed

  • Ensures department is run effectively with priority on safety and quality

  • Responsible for meeting standard production timelines

  • Devises action plans for non-conforming/non-standard issues

  • Growth and Development of employees through appropriate coaching and exemplification of the company's core values

  • Maintaining control of assigned in-process materials and tools

  • Providing training to packaging personnel for processes, procedures and safe equipment use.

  • Acts as an extension to Management in their respective department

  • Assumes responsibility for the 5S in responsible area

  • Ensures that Daily Performance Metrics are communicated and met

  • Participates in cross-functional team activities in the development and implementation of new processes, tools and / or equipment and as part of the normal operational needs

  • Assists in the orientation / training of new Team Members and Contingent Labor to the manufacturing process

  • Maintains supervisor's files including electronic personnel transactions, labor, production and quality reports

  • Conducts periodic reviews of existing tooling, fixtures, and gauges

  • Defines / implements cost effective replacements as technology requires

  • Consistently demonstrate ability to respond to changing situations in a flexible manner in order to meet current needs, such as reprioritizing work as necessary










Experience/Skills Required:


  • 3 + years of Supervisory/Management experience. 5+ direct reports- Preferred

  • Experience working in Manufacturing around machining

  • Ability to think analytically

  • Ability to understand and solve manufacturing problems

  • Ability to prioritize/re-prioritize tasks, and successfully conducts root-cause analysis and implements counter measures

  • Ability to deal with technical, scheduling, project management and cost related issues

  • Ability to Supervise and develop others

  • Strong knowledge of manufacturing processes

  • Sound business acumen

  • Computer literacy required: Microsoft Office including spreadsheet, Power Point, and Database MRP/ERP software

  • Demonstrated ability to communicate orally or in written form with co-workers, Team Members, Managers, Customers, and/or vendors as required

  • Flexibility in schedule to ensure customers' needs have been met




Required Education:


  • Associate Degree or equivalent and relevant work experience.




Physical Requirements:


  • Able to frequently lift up to 10lb and occasionally up to 40lb.

  • Able to work 12 hour shifts and overtime when required.

  • Able to properly wear PPE (Personal Protective Equipment) required for the area of operation such as gloves, ear protection, eye protection, smocks, etc.

  • Able to stand for long periods of time, bend, stoop, lift, reach above shoulders, pull, push, climb up/down stairs.






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-51006
Job Location: Addison, TX
Rate: 65000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2020-01-13 00:00:00.0
Input Date: 12/20/2019
Last Updated: 02/11/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Material Handler III

Description:

The job is physical in that candidate must be able to climb stairs to get to a stockroom environment
They will work in a stockroom environment working on Kitting Electrical computer parts
Work with receiving and delivering small pieces received to distribute to the floor
Will be pulling items and delivering
Will use computer to track so must have computer familiarity
This is NOT a WAREHOUSE forklift material handler role
Basic level but requires physical fitness to handle stairs
Inventory, tracking, counting electronic pieces



 
Job Number: 1910103618
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/06/2020
Last Updated: 02/17/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQd8QAG&URLSource=cjhunter