Job Search Results

967 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 01:56PM Pacific Time by ContractJobHunter. )

Listings 1 - 967

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2438 - MISSION SYSTEMS ENGINEERING - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Candidates must possess a degree in Engineering (Systems Design, Aerospace, Electrical, Software, or Mechanical Engineering)

Must have a proven track record as a System Designer/Architect capable of conceptualizing, designing and building complex systems from initial customer requirements through to product delivery and commissioning.

Eight (8) or more years of experience of diverse product development in end-to-end deployed systems in a leadership role is required.

Experience developing and mentoring engineers and other technical staff.

The candidate must have comprehensive engineering knowledge in more than one discipline.
 
Job Number: 2438
Job Location: US Northeast, US Northeast
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24 Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2440 - ELECTRICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Electrical engineers to currently support a number of programs across the Space Mission organization.

Candidates must have a Bachelor's or Master's degree in electrical engineering.

Must be experienced utilizing electronic design tools such as ORCAD Capture, PSpice A/D including Advanced Analysis, OrCAD Signal Explorer, ISE Design Suite, ModelSim, Synplify, and Matlab/Simulink.

Proficient with laboratory equipment: power supplies, multimeters, function generators, oscilloscopes, dynamic signal analyzers, impedance analyzers, and network analyzers.

Candidates are expected to understand the basics of interfacing between hardware and software.

Experience developing and/or testing equipment for space applications.

Familiar with Actual Fusion, Xilinx V5, and arm microprocessor would be an asset.
 
Job Number: 2440
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2441 - SOFTWARE DEVELOPMENT ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Software Development engineers currently support a number of programs across the Space Mission organization.

Candidates must possess a Master's degree in Computer Science or Computing Systems Engineering.

A minimum of 4 years design and development experience with 2 years in Rovers software development, QNX and RTEMS experience and related device driver development.

Must possess experience with languages such as C, C++, Java, Matlab/Simulink and the ability to work closely with electrical engineers.

Well versed in software lifecycle, software configuration management and development process.

Design, development, implementation of Data Handling Unit and basic understanding of Avionics systems.

Experience with Pushbroom, CMOS telescopes and the following interfaces: SpaceWire, Hotlink, LVDS, UDP TCP/IP, CSSDS, RS422, CAN bus , SPI , 8051, Fusion.
 
Job Number: 2441
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2443 - STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports

Support various research and development projects

Bachelor in aerospace or mechanical engineering.

Minimum of 5 years MRB experience.

Experience, including at least one of the following skills, structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Have practical knowledge and experience of Nastran/Patran

Excellent knowledge of aircraft structure and system installation technical requirements.

Knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.
Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Bilingual - have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2443
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2444 - MATERIAL & PROCESSES - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare and approve Test Plans Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;
Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 8 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical aerospace and military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

A team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).

You are familiar with flammability certification requirements as per FAR 25.
 
Job Number: 2444
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2445 - PRODUCT STRUCTURE MANAGEMENT - cv, word doc only

Description:
Responsible for the Product Structure Management within the Global 7000-8000 Program for Interiors and Completions Engineering.

Create and maintain the top levels of a configured product structure from the design phase through certification and transitioning to a sustaining program.Participate in the organization of the completions product structure to optimize Engineering packages with all available customer options.

Participate in the maintenance of the Options Catalog.

Configure the engineering packages in the PLM system and create AC specific product structures.

Work with the Customer Interfacing Team to create project specific Options listings.

Create the Customer Configuration Lists defining all engineering packages required to meet selected options and create Top-Level AC specific engineering lists.

Maintain and define rules controlling the applicability of the Engineering packages in relation to Customer options. Program these rules in the VSpec Customer Definition Software.

Responsibility for control, health and quality of the Aircraft Interiors configured product structures.

Keep an oversight over the product changes and maintain the product structure.

Support the Completions Engineering groups at different
development and customer aircraft definition milestones as needed.

A degree in Aerospace or Mechanical Engineering or equivalent education.

Minimum of 5-7 years%u2019 experience in design, product configuration management.

Possess strong knowledge and technical expertise of product structure configuration within a PDM/PLM tool is essential.

Knowledge of aerospace industry best practices.

Are proficient with ENOVIA VPLM V5 product suite, especially with the product configuration workbenches.

Have knowledge of Business Aircraft Completions.

Experience on CATIA V5, experience with Knowledge Based Engineering (KBE) is an asset

Have experience with SAP & eProduct.

Have experience in pulling together the efforts of varied groups with different objectives and mindsets towards a common objective.

Are resourceful in identifying and removing roadblocks and looking for creative ways to overcome challenges, and can maintain a strong adherence to the Program long-term vision.

Motivated by challenges and a drive for results, bringing a proven track record of success

Good communication and technical report writing skills - able to clearly and concisely convey information and vulgarize technical subjects.

Bilingual (French and English), oral and written is an asset.

Would be available to work on a Tuesday to Saturday schedule if required.

Have a sense of teamwork, the ability to work with minimal supervision, the ability to work in a dynamic environment, you are mobile (Montreal) and you are able to make decisions autonomously.
 
Job Number: 2445
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Houston, TX

Description:
STS AeroStaff Services now offers Aircraft Records Specialist jobs in Houston, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Records Specialist is responsible for data entry, audits, and updates of daily production documentation by the maintenance organization.


Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items

• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance

• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system

• Performs the removal and installation of components in the Component Control System module of the maintenance computer system

• Reviews and Updates documentation pertaining to AD’s and modification compliance in the Modification Control System module of the maintenance computer system

• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft

• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system

• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports

• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance

• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations

• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations

• Produces Aircraft Records specification reports when requested from outside parties

• Monitor correction requests

• Interact with Planning, Records, Reliability, Production and Engineering departments

• Responsible for verifying the accuracy of maintenance databases through various reports

• Submits recommendations for process improvements and assists Records Analyst in training new Employees


Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred

• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred

• Must be able to master PC software packages including Microsoft Excel/Word/Access applications

• Experience working with an imaging system software is a plus

• Experience working with the Maxi-Merlin main frame application is a plus

• Ability to learn to read technical documents, follow instructions, and understand office procedures

• Must have vision ability sufficient to view and read computer monitor on a frequent basis Must be able to lift 30 pounds and drive on secured airport property

• Must be able to comply with Company attendance standards as described in established guidelines

• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information

• Must have a valid driver’s license at time of hire and be comfortable driving at night

• Candidate must be able to type 40 WPM, detailed oriented, self-starter, dependable, able to multi task, work in a close environment with a Team and able to work productively with little supervision


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42283
Job Location: Houston, TX
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Equipment & Tool Designer

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-03769
Job Location: Troy, MI
Rate: BOE
Per Diem: yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Eric Janda
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the aircraft.

Previous Garmin experience is required.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.

Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-022
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Work as a member of a team of systems engineers performing and providing technical direction for the development, engineering, interfacing, integration, and testing of complex hardware/software for Mission Systems products consisting of military and civil flight data recorder products and/or military stores management systems products while positively affecting short-term and long-term business goals and objectives.



" Experience in the following systems engineering lifecycle phases: concept development, requirements management, system architecture, system design and development, systems integration, systems verification & validation

" Experience working on projects with a requirement for RTCA/DO-254, RTCA/DO-178B/C or equivalent

" Familiarity with Military interface and environmental standards such as MIL-STD-1553, MIL-STD-1760, MIL-STD-461, and MIL-STD-810

" Experience with engineering tools such as Dimensions, DOORS, or Enterprise Architect

" Familiarity with basic programming and scripting languages such as Visual Basic, Python, or C

" Familiarity with Problem Reporting and Change Control processes

" Existing Systems expertise within the Aviation Industry

" Provide required customer interaction to specify top-level requirements for systems that meet the customer goals and further refine these top-level requirements into specifications, architectures, configuration baselines, and lower-level requirements suitable for implementation

" Responsible for project planning activities, including work tasks, project scope, schedule and budget




 
Job Number: 18-23067
Job Location: Grand Rapids, MI
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-17 00:00:00.0
Start Date: 2018-06-18 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAE Engineer

Description:


Description:

BS Degree in ME/AERO. Minimum of 6+ years of industry experience as CAE analyst and specific solver software usage depending on department speciality area. Minimum of 5 years of experience using pre-prcessor / post-processor tools (Hyperworks) for complex vehicle system level CAE model construction, visualization, and analysis. Related advanced degree may be substituted for 2 years of experience.
 
Job Number: NSR10028CAE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CONTRACTS SUPERVISOR

Description:
JSG is seeking a Contracts Supervisor for one of our premier Aerospace clients in Moorpark, CA. This is a full-time permanent opportunity.



Job Summary:

The Contracts Supervisor provides oversight and guidance to the Moorpark office contract management team. The contracts team is tasked with establishing and maintaining contractual agreements that facilitate: 1) a clear understanding of commitments, 2) balancing risk between the company and the customer, 3) timely invoicing and payment, 4) positive customer relations, and 5) accurate communication with the internal organization.

Roles and Responsibilities:

The Contracts Supervisor’s main responsibilities include:

Provide oversight, leadership and development to a team of contract professionals.

Represent the Contract Administration organization with peer organizations and customers to develop plans, organize work, negotiate terms, monitor progress, and resolve problems.
Assure that all clarifications and amendments of negotiations are incorporated into the final contract.
Participate in the planning, organizing, monitoring, and assessment of the team’s work.
Direct responsibility for handling high profile contracts from cradle to grave, including but not limited to:
Review solicitation and prepare responses for proposals, bids, and contract modifications.
Analyze contracting requirements, special provisions, and terms and conditions to ensure compliance with laws, regulations, corporate policies, and business unit procedures.
Prepare and administer the necessary correspondence, negotiation memoranda, and contract documentation to ensure timely and coordinated submittals.
Prepare, organize, and maintain contract records and files documenting contract performance, compliance, and contract closeout.

Requirements and Education:

The successful candidate must have a Bachelor's degree in a business or technical discipline. Master’s degree or JD preferred.
6 or more years of contracts management experience with 1-2 years of supervisory experience in a manufacturing environment working with government and commercial aerospace and defense contracts.

Prior work experience interpreting contract requirements, terms and conditions evaluation and negotiation.
Knowledge of FAR/DFARs requirements and US Government export regulations are also desirable.
Responsible for interacting with all business segments and management.

Must be a U.S. Citizen.

Competencies:

Excellent written, verbal and presentation skills suitable for interaction with customers and various levels of management.
Efficiency, attention to detail, and a high level of accuracy.
Self-starter with strong analytical and problem-solving skills
Effective time management skills.
Capable of dealing with multiple internal and external (domestic/international) customers
Ability to Work with offsite teams.
Proficient with Microsoft office suite software.
Knowledge with IFS, SAP, Oracle or other type of ERP/MRP software.
Knowledge of FARS, DFARs, EAR and ITAR requirements a plus.
 
Job Number: 366381
Job Location: Moorpark, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Cabeling Designer

Description:
We are looking for an Electrical Designers that will be responsible for leading the electrical design process of related components and systems from concept to production in order to achieve the product objectives within a specified time.

RESPONSIBILITIES:
1. Establishes a reasonable project development schedule from concept to production implementation in line with overall business requirements.
2. Supports all design related component styling, purchasing and manufacturing issues with emphasis on quality, reliability, timely delivery, and cost.
3. Determines ideal electrical component placement and manufacturing route to ensure overall design, performance, and cost conformance.
4. Determines nature and type of electronic models, detail drawings, and analysis required to support the above and supervises their release through the release cycle.
5. Prepares preliminary sketches and/or schematic diagrams and/or presentations to aid in the understanding and solution of engineering problems.
6. Participates in design reviews on projects to ensure adequate input and involvement from all interested groups.
7. Performs other miscellaneous project related assignments.

Requirements:
1. 5 years minimum related design experience
2. Required - extensive experience with Pro-Engineer (Creo 2.0 or 3.0)
3. Desired - extensive experience with Pro/Cabling
4. Desired – extensive experience with Routed System Designer (RSD) & Creo Schematics 2.0 or 3.0
5. Superior technical knowledge as demonstrated by academic experience and broad practical experience in design.
6. Excellent verbal and written communication skills.
7. Demonstrated ability to lead major process change in a way that enhances overall corporate performance.
8. High level of people skills, able to work in a team environment.
9. Ability to work with domestic and international technology partners.
10. Direct and coordinate contract design team.
11. Microsoft software including Excel, Project, Word, Outlook and PowerPoint
 
Job Number: AG
Job Location: Wyoming, MN
Rate: 45
Per Diem: C2D
Overtime: Possible
Duration: 6 months c2D
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Development EWIS AR/DER

Description:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company

As an EWIS AR for Cabin Development, you will:
• Review and approve engineering designs for EWIS compliance aspects
• Interact and coordinate with FAA/DERs/ARs during a certification project
• Coordinate, complete and track certification tasks
• Write/review/approve certification plans, test plans, test reports and prepare related paperwork and forms.

What you'll bring to the team:
• Preferably, you will have been a Gulfstream Authorized Representative (AR), a Company AR at another company or an FAA Delegated Engineering Representative (DER)
• Knowledge and understanding of CFR14 - Part 21, 23, 25, 91, 135
• EWIS Certification and DER experience finding compliance with 14 CFR Part 25, Subpart H, Sections 25.1701 through 25.1733
• Expertise with aircraft interiors required
• Experience with certification activities associated with Supplemental Type Certificates (STC)

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Word
• Excel
• Power Point
• Outlook

Education
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15+) years progressively responsible engineering exp in specific tech discipline with Bachelors.
• Requires approval of Eng PRB incl bus justification

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry
 
Job Number: 24-261
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer
Savannah, GA
Rate: $55-$62

Unique Skills:

Unique Skills: -This position provides technical and project oversight of projects for Post-TC design changes for company's certified aircraft. -The chosen candidate will serve as a liaison between the company (the applicant) and FAA/ODA, engineering focal and other Civil Aviation Authorities. - The chosen candidate must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in aircraft TC and Post-TC design change (both major & minor) projects is highly desirable Education and Experience Requirements: Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities. Position Purpose: Under minimum supervision, performs a variety of engineering tasks to support Post-TC (Type Certificate) major design change projects and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations. Principle Duties and Responsibilities/Essential Functions: 1. Reviews Post-TC Major Design Change Projects data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure Cert documentation is prepared and processed in accordance with approved procedures. 2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance. 4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects. 5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations. 6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products. Additional Functions: 1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues. 2. Develops department training material. 3. Assumes responsibility for assigned projects, tasks, or processes. 4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues. 5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned. Other Requirements: 1. Must be proficient in working with MS Office software. 2. Strong background with Federal Aviation Administration (FAA) certification processes. 3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must be very experienced in working with regulatory requirements. 5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 6. Must have excellent organizational and planning skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 9000
Job Location: Savannah, GA
Rate: $55-$62
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Clinical Integration Engineer (JBOSS Req)

Description:
ENEA…an environment where you can innovate.

The Clinical Integration Engineer is responsible for designing, maintaining and solving HL7 integration between our Safety Software and our EHR Partners using Mirth Connect with custom Java code for mapping input and output.

Also, includes onsite participation with customer “go live” events for seamless coordination and administration with our EMR Partners. As well as improving our Java based safety software applications.

Essential Duties & Responsibilities

--Develop object oriented software solutions using Java as the primary programming language.
--Interact and manage multiple EHR Partners and Clinical Integration customers to problem solve in a real-time basis.
--Represent our client with professionalism, which includes appropriate attire when engaged with our partners and customers.
--Lead investigations of complex system level issues to determine root cause and propose resolutions.
--Write and maintain technical procedures and documentation for the application interfaces developed.
--Work in an agile, object-oriented, team environment with version control, change management and continuous improvement protocols.
--Ensure compliance with company’s quality systems and software development practices.

Knowledge, Skills & Qualifications

**MUST HAVE STRONG JBOSS BACKGROUND TO BE CONSIDERED**
Software Engineer with strong knowledge of Java and SQL Server (or other database servers)
Experience with developing HL7 interfaces using Mirth Connect (or other EHR Interoperability Technology)
Ability to perform network diagnostics and/or knowledge of networking protocols
Knowledge of healthcare / hospital environments a plus.
Ability to quickly grasp complex technical concepts and make them easily understandable in text and pictures.
Good data analysis, communication, troubleshooting and writing skills are required.
Ability to work under deadline driven pressure.
Skilled at prioritization and multi-tasking.

Education and Experience

Bachelor’s degree in Computer Science or related field.
5+ years’ experience in a software engineering role.
2+ years’ developing software using Java.
1+ year of JavaScript experience.

We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.

OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: 610
Job Location: San Diego, CA
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
**Must be a U.S. Person for purposes of export compliance. A U.S. Person is defined as either a Green Card Holder or U.S. Citizen.**

**NEED CANDIDATES TO START IMMEDIATELY WITHIN THE NEXT 2 WEEKS!**

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 30657-1
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Engineer

Description:
We are seeking for an experienced Cyber Security Engineer for this well-known company in Washington State. You will provide technical knowledge and analysis of highly specialized applications and operational environment, high-level functional systems analysis, design, integration, documentation and implementation advice on moderately complex problems that require an appropriate level of knowledge of the subject matter for effective implementation.

RESPONSIBILITIES:
Strong working knowledge of IA concepts such as patch management, two-factor authentication, host-based security, intrusion detection, security event management and defense-in-depth.
Experience in security architecture design, Security Audit tools, security requirements generation, security testing, administration of security devices such as firewalls and intrusion detection systems.
A strong understanding of Security Technical Implementation Guides (STIGS), HBSS, ACAS, Software Assurance techniques & tools. Additionally, experience with security products such as vulnerability scanning and network assessment tools.
Security engineering skills with a working knowledge of Information Assurance (IA) technology, NIST standards, DoDI 8500.2 and SP 800-53.
Experience in the Cybersecurity Lifecycle to include: generating IA requirements, creating IA architecture design, configuring IA audit tools, conducting IA verification and performing IA compliance.
Excellent technical document preparation and verbal communication skills are required for presentation of technical IA issues

REQUIREMENTS:
Bachelors Degree in Computer Science, Engineering or Cybersecurity with increasingly responsible roles in software/network engineering and the development of Information Assurance solutions.
Experience with Information Assurance policies and procedures and the ability to apply IA requirements to an existing system.
CISSP, CISA, CCIE or equivalent years of experience required.
 
Job Location: Everett, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Software Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Required Experience:



  • 5-10 years in aerospace/defense industry

  • 4 years of relevant experience in the fields of computer processing technology, PP, AT, or Cybersecurity

  • Experience in requirements generation, design, development, integration, and testing of systems for military applications

  • Experience with weapon systems, processing timelines, and real-time operating systems

  • Experience leading and advising DoD customers on PP issues

  • Experience with program protection concepts, anti-tamper, cryptography, and security solutions

  • Familiarity with documentation and tools such as: DoD 8500 series, DoD 5200 series, NIST Special Publications (800-53, 800-37, etc.)

  • Active DoD Secret Security clearance with ability to obtain Top Secret clearance

  • Project management experience


 


Desired Experience and Skills:



  • DoD Top Secret clearance with current SSBI within last 5 years

  • Cyber Certifications in accordance with DoDD 8570/DoDD 8140 such as CISSP, GSLC, CEH

  • Aircraft/store integration experience

  • Experience briefing customer communities on PP, AT, or Cybersecurity


 


Education Required:



  • BS, Electrical Engineering or Computer Science

  • MS, Electrical Engineering or Computer Science Desired


 
Job Number: O8197317
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Analyst

Description:
Wanted: Data Analyst for our client in New Jersey. Previous experience in applying data science against open source media to support intelligence collection and data fusion. Apply today to be considered for this position!

The ideal candidate for this position will perform the following tasks:
* Design and develop methods, processes, and systems to consolidate and analyze structured and unstructured, diverse sources including big data sources.
* Develop and use advanced software programs, algorithms, querying and automated processes to cleanse, integrate and evaluate datasets and models complex business problems.
* Works with cross-discipline teams in order to ensure connectivity between various databases and systems.
* Identifies meaningful insights and interprets and communicates findings and recommendations.
* May develop information tools, algorithms, dashboards, and queries to monitor and improve business performance.
* Maintains awareness of emerging analytics and big-data technologies.

Mandatory Qualifications and Experience:
* Previous experience in applying data science against open source media to support intelligence collection and data fusion.
* Bachelors in Mathematics, Statistics, Computer Science or equivalent.
* Preferred languages: R, SAS, Python, Matlab, SQL, Hive, Pig, Spark.
* Must be U.S citizen.

Desired Qualifications and Experience:
* Applying data science against open source media to support Intelligence collection and data fusion.
* Predictive Modeling
* Story-Telling and Visualization
* Distributed Computing
* Cloud - AWS and/or OpenStack
* Web Services/API knowledge (REST, GraphQL)
* Common data transport formats (e.g., JSON, XML, Parquet, Avro, Proto Buf)
* Experience with Agile development processes
* Hadoop Ecosystem (e.g., MapReduce, Hive, Pig, Spark, HBase, Kudu, Impala, HDFS) experience
* Java and/or Python programming experience
* Experience with both SQL and noSQL databases

The ideal candidate for this position will possess the following skills and characteristics:
* Must have strong problem solving skills, business acumen, and demonstrated excellent oral and written communication skills.
* Able to work in a team environment
* Basic understanding of Data Science concepts

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127906
Job Location: Moorestown, NJ
Start Date: 06/18/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:


Description:

Job Title: Scale Model Designer


BS Degree in ME/EE/AE. Design Engineer with over 2 years of engineering experience in actual creation of required components per specialty (concept, specification setting and layout creation and negotiation capability) and CATIA V5 experience.

Activities include working from scan / surface and drawing data available for each vehicle development project and designing a scale model that is used for aerodynamic research and development in a scale wind tunnel environment. Along with designing vehicle models, candidate will also be responsible to work with aerodynamic development engineers to develop special test parts, fixtures for sensors, and help design countermeasure parts used in aerodynamic tests. Ideal candidate will have extensive design skills and be proficient in CATIA software package. Knowledge of Magics software would be a bonus, but not required. Machine design and automotive proficiency are a plus, as well as some hands on mechanical abilities. A good understanding of rapid prototype manufacturing techniques is also a bonus.
.
Over time and may be required depending on project load / Schedule.
 
Job Number: NSR10029DE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Please share updated resume at ravi@iconma.com

Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
The client Company is seeking engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, Lab Windows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 664-Electronic Sys Design & Analy
 
Job Number: 18-09719
Job Location: Oklahoma City,, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Everett, WA
Duration: 6 months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-08982
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA/ Long Beach, CA
Duration: 6 months

Description:
The client is seeking a design and analysis (level 4) engineer in Avionics Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities:
- Serving as a Cognizant Engineer on projects where supplier to client are designing new / altering existing avionics hardware
- Reviewing supplier technical documentation for adequacy and accuracy
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 664-Electronic Sys Design & Analy

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-09270
Job Location: Huntington Beach,, CA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Electrical Systems Design)

Description:
Design and Analysis Engineer 4

Location: Everett, WA
Duration: 3 months

Job Description:
Generic Statement of Work:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work:
777X Air supply, support of Qualification testing (coordination between Client Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07302
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Jacksonville, FL
Duration: 6 month contract
Pay Rate: $39.00/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Job Description:
- Performs mid to high level complexity drafting and design of assembly level CAD and Drawings.
- Must be proficient with SolidWorks CAD software including 3D modeling and drawing creation.
- Must have a thorough understanding of ASME Drawing Standards including ASME Y14.5 Dimensioning and Tolerancing (GD&T).
- The applicant will be expected to be capable of generating as well as self-checking full drawing packages including complete dimensioning callouts to meet engineering and design requirements.
- Experience with designing for or manufacturing molded products and associated tooling is a plus.

Requirements:
- Associates Degree
- U.S. Citizen
- 15 – 20 years of experience
 
Job Number: 9133
Job Location: Jacksonville, FL
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Design & Analysis Engineer III & IV - (AL)

Description:
SEVERAL OPENINGS IN THE HUNTSVILLE, AL AREA.

ACTIVE SECRET CLEARANCE REQUIRED TO START.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (Formerly 'Comforce')
 
Job Number: EEAL-Secret
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Design & Analysis Engineer III - (WA)

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Our Aerospace Client is seeking a engineer on a Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV - (HB)

Description:
We are seeking a design and analysis (level 4) engineer in Avionics Engineering on a Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities

Serving as a Cognizant Engineer on projects where supplier to Client are designing new / altering existing avionics hardware
Reviewing supplier technical documentation for adequacy and accuracy
Managing hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & field operation issues
Researching new technologies for potential application
Developing solutions to technical problems of safety of flight scope and impact
Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
Work with customers and their Client representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEEngIVHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Active DoD secret clearance to start.
Responsibilities to include the development, integration and documentation of electrical cable designs of air vehicle systems. Develop electrical wiring designs of a functional system including the selection of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc. Designs to be accomplished utilizing the HarnesSys wiring tool and TeamCenter. Create block diagrams, system wiring diagrams and detailed cable assembly “Product Definition Packages” (PDPs) using SAE AS 50881 and proven commercial practices. Facilitation of design reviews with key stakeholders to ensure designs meet requirements. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions.
Qualifications:
Basic Qualifications:
14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education will be considered in lieu of degree. Minimum of 9 years’ experience directly related to aircraft design and integration, as well as proven engineering team leadership abilities or equivalent education/years of experience. Demonstrated experience with 3D modeling software (NX or equivalent). Preferred Qualifications:
Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university. Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing the NX software.
 
Job Number: 682018
Job Location: Melbourne, FL
Rate: 100p/hour
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: June 2018
Input Date: 11/14/2020
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Lead efforts in designing, building, and testing of electrical systems for military, commercial and industrial electronic applications. The candidate will provide electrical engineering expertise and participate in multi-discipline integrated product team working closely with Program Managers and Systems, Software, Mechanical, Electrical and Manufacturing Engineers.


Working knowledge of OrCAD, PADS, Altium, AutoCAD and Solidwork
Experience with leading the Hardware Development Process, including CM, MRB, SDR and analysis
Hands-on experience with the full product life-cycle from engineering proposal to manufacturing release
Experience with military and commercial standards (MIL-STD-461, MIL-S-901D, IPC-610, FCC/CE)
Familiar with MATLAB, C/C++ and other programming languages.
Familiar with mixed signal schematic and PCB layout techniques
 
Job Number: 42270
Job Location: Waltham, MA
Per Diem: pos
Overtime: pos
Duration: 6 mont +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Candidate will perform electrical design, development, integration and troubleshooting of power, simulated and actual aircraft electrical signals, simulated cockpit electrical panels in Mission Procedures Trainers and lab-based test stands. Candidate will prepare electrical design drawings, assemble, integrate, and test avionics test stand components.

REQUIRED EXPERIENCE:
Knowledge of electrical power, discrete, synchro, analog, and Mil-Std-1553 data interfaces. Experience in electrical design, development, and test of lab-based avionics test stands. Experience with VME-based processor and data interface components.
Circuit board soldering certification. Experience with PC-based hardware and software.
Create and update schematics and mechanical drawing using AutoCAD 4-5 Years
Electronic/Electrical Designs Perform complete simulator electronic/electrical designs. 0-3 Years
Mil-Std-1553 Knowledge of 1553 bus interfaces and implementation. 0-3 Years

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift
Part-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171274
Job Location: Palmdale, CA
Rate: $47 to $70.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: Yes
Start Date: Yes
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Required Skills:
- Experience designing data acquisition systems for aircraft and test lab environment.
- Working knowledge of force, flow, pressure and temperature sensing technologies.
- Knowledge of ARINC bus architectures; 664, 429, 825
- Experience with IADS data display and analysis software

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8930
Job Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (TSI)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills:
• Experience designing data acquisition systems for aircraft and test lab environment.
• Working knowledge of force, flow, pressure and temperature sensing technologies.
• Knowledge of ARINC bus architectures; 664, 429, 825
• Experience with IADS data display and analysis software

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-244
Job Location: Savannah, GA
Rate: $52-57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Hardware Circuit Design

Description:


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description



  • This position focuses on circuit board designs for digital hardware in communication products.

  • We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering.

  • This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links.

  • Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products.


 


Candidates must have the following skills:



  • Must possess or be eligible for obtaining a U.S. DOD Secret Clearance. U.S. Citizenship is required. Candidate selected will be subject to a government security investigation and must meet eligibility requirements.

  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

  • Circuit board design experience including experience with schematic capture tools

  • Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).


 


Desired Experience/Skills:



  • Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer

  • Knowledge of FPGA, ARM, and DDR memory is highly desired.

  • Knowledge in the area of high speed design practices including signal integrity is also desired.

  • Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems






 
Job Number: R13927
Job Location: Cedar Rapids, IA
Rate: 50-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Test Specialist

Description:
Notes from the Hiring Manager:

* Testing background with electrical work experiences; ability to read blueprints, engineering drawings
* Networking and circuitry exp with above average computer knowledge (Linux, VMWare, Redhat, etc.)
* Awareness/knowledge of electrical safety and power requirements

Summary:

To perform Configuration and Acceptance Testing of Complex Electronic Systems / Assemblies. Performs a variety of complex technical functions related to the support of manufacturing and engineering activities such as set-up, operation, testing or calibration of systems, circuitry, networking, software, and specialized equipment within a production setting.

Job Description:

> Knowledge of analog and digital symbol identification
> Knowledge of test practices and procedures.
> Personal computer skills required to configure and load SW.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
> LINUX Operating System experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

Knowledge, Skills, And Abilities Required:

> 5+ years of experience with an Associate’s Degree (highly preferred) or technical training in a related field
> Must be a US Citizen (applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information).
> State of the art knowledge of electronics - both digital logic and analog basics.
> Knowledge of Linux, VMWare, Redhat & other software packages used in virtual machines.
> Ability to operate test equipment and build test tooling in fully integrated electronic system.
> Knowledge of test practices and procedures, specifically trouble shooting methodology.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to understand component specifications.
 
Job Number: 028_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Loads Analysis Engineers - Many Needed

Description:
**Must be degreed
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis

*Email resumes to mmccarthy@pdstech.com
 
Job Number: BO-OK-Loads/ELE
Job Location: Oklahoma City, OK
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (WA)

Description:
Generic Statement of Work: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work: 777X Air supply, support of Qualification testing (coordination between Boeing Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEIVWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Avionics

Description:
Major purpose:

Software Engineers support computational systems architecture and system software for real-time simulation applications; create new and modified simulation models using established modeling techniques; and work closely with other engineering disciplines.





Required

" BS Computer Science, or related discipline, or equivalent experience required

" Software engineering experience mid-level preferred

" Ability to apply sound engineering principles and develop innovative solutions

" Demonstrated ability to design, develop, document, test and debug simulation software and systems that contain logical and mathematical solutions

" Experience implementing functional requirements for computer software

" Software languages FORTRAN, C/C++, Ada

" ClearCase experience a plus

" Excellent communication skills including oral, written, interpersonal, and listening

" Proven success in a fast paced development environment and possess a willingness to take ownership, accept accountability, and thrive under pressure

" Strong problem solving and analytical skills

" Flexibility to support occasional overtime, weekend work, shift work and site travel (CONUS)

" General computer skills including use of Microsoft Office products



*********Active DoD Secret Clearance within a six year investigation period REQUIRED**********





Desired

" Linux and Unix experience a plus

" Familiarity with aircraft avionics 1553 protocol and simulator experience

" Experience working in a production environment

" Knowledge of different testing methodologies (e.g., White/Gray/Black box testing)

" Experience with Flight Simulation and/or Radar Systems



 
Job Number: 18-20097
Job Location: Binghamton, NY
Rate: 85.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-18 00:00:00.0
Start Date: 2018-06-18 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Helena, MT
Duration: 5 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications:
5+ years of experience using CATIA V5
2+ years of client Tool Design experience
GD&T Standards Training
1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications:
1+ year(s) experience using Enovia
6 months experience in fixture fabrication
Experience with hydraulic/pneumatic design

Additional Information:
Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and client PDM.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-09273
Job Location: Helena, MT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: July 1
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 4 months (with possible extension)

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer
 
Job Number: 18-07634
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 4 months+
Start Date: 6/4/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 4 months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07634
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE AREA.

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: ToolDesEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III (Helena, MT)

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications: 5+ years of experience using CATIA V5 2+ years of Boeing Tool Design experience GD&T Standards Training 1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications: 1+ year(s) experience using Enovia 6 months experience in fixture fabrication experience with hydraulic/pneumatic design

Additional Information:

Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and Boeing PDM.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipToolDesMT
Job Location: Helena, MT
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 1

Description:
Equipment & Tool Engineer 1

Location: Ridley Park, PA
Duration: 6 months

Description:
Assists with the development of basic equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data for equipment and tooling. Assists with compliance reviews regarding safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Supports the tracking of contractual performance milestones, the development of preventative maintenance and spares plans, assists with production readiness planning, and training of Production and Maintenance personnel. Develops and implements basic work-arounds and maintains configuration of hardware, software and documentation. Assists with the disposition of assets.

Education / Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer

Please share updated resume at ravi@iconma.com for more details.
 
Job Number: 18-07210
Job Location: Ridley Park,, PA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3 (Robotics/Automation)

Description:
Equipment & Tool Engineer 3

Location: Everett, WA
Duration: 9 months

Description:
The primary responsibilities of the job roles include the following:
Ensure factory equipment functions to meet production system requirements and verify rate equipment technical requirements are satisfied through procurement and commissioning.
The successful candidate will have automation experience and a strong problem solving background troubleshooting complex production equipment as well as an ability to support procurement of rate equipment projects.

Responsibilities include the following:
- Supports the evaluation of program and project requirements, develops moderately complex equipment concepts and designs solutions for the Production System.
- Ensure compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
- Validates contractual performance milestones, maintains configuration control, conducts project and in-depth technical reviews, prepares plans for productions readiness, preventative maintenance, and spares.
- Conducts equipment training for Production and Maintenance personnel. Develops and implements moderately complex work-arounds and maintains configuration of hardware, software and documentation.
- Supports in-production equipment and troubleshoots issues working with equipment services to perform root cause corrective action resulting in preventative measures to minimize downtime.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Must have at least 5 years of experience working with manufacturing or equipment systems.
Excellent aptitude to understand the technical details and their effect on the overall system is required.
Familiarity with PLC programming, Siemens and/or FANUC, CNC logic and/or experience programming equipment machine controls is required.

Skill Code: 66U-Designer Engineer

Please share updated resume at ravi@iconma.com
 
Job Number: 18-03766
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 4 months Job Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-07642
Job Location: Everett, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: sachin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 6-7 months Description: Key Skill Needs: - Experience leading control system design projects for aerospace and/or automotive industries. - Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment. - Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers. - Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment. - Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc). - Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability. - Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners). - Systems thinking and ability to isolate issues from a variety of interlinked systems. - Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.) - Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects. - Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.) - Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment. - Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc. - Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively. Preferred Systems Experience/Knowledge: - Siemens TIA Portal - Siemens Step 7 PLC programming software - Siemens WinAC RTX - Siemens SINUMERIK 840 D SL System Maintenance and Programming - Siemens SIMOTION software - Siemens HT8 and HMI Pro software - Siemens WinCC Advance and WinCC Flexible HMI programming software - Siemens SCALANCE industrial network switches X408, X308, X208, etc... - Siemens Simatic IT software suite - Sunrise AGV software - Siemens PROFINET Primary Setup Tool - SICK Safety Scanner Configuration & Diagnostic Software (CDS) - Kepware or similar OPC software Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-08984
Job Location: Everett, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: sachin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer
 
Job Number: 18-08984
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: 6/23/17
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA & ASIC Design/Verification Engineer

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: R13869
Job Location: Cedar Rapids, IA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer with active secret CA

Description:
Requirement#AERO-REQ-0832
Work Location Palmdale, CA
Work Week 9/80-A
Priority High
Needed Date 06/19/2018
End Date 06/07/2019
Number of Resources 1
Security Clearance Secret

Title Flight Controls Engineer-N
Description
•Flight Critical Systems
•Failure Management for flight critical systems and failure modes & effects testing
•Flight Test Operations
•Flight Control System mechanization which includes the software and hardware •Failure management for redundant flight critical and integrated systems •Aeronautical Engineering Instruction and System Check Outs for Flight Control System
•On-aircraft problem resolution for all flight control systems to ensure the aircraft is safe and ready for daily flight operations.
•Mission Control Room Support
•1394 Fire Spy analysis tool
•Integrated trouble shooting experience which includes flight control and other Vehicle Systems components which fall outside FCS area
•Flight Test verification and validation activities

Skill/Experience/Education
Mandatory:

Experience with building system integration laboratories, perform system integration and testing of avionics components.

Electrical engineering background with ability to design electrical harness to connect avionics component using Ethernet, serial, analog, and 1553 busses.

Experience with design of power system architecture for avionics components using 5, 20 through 270 volts DC

Demonstrated ability coordinating with systems engineering, hardware designers, and software developers.

Must have a Secret clearance to start
Desired:

B.S. Degree or above in Engineering or related field



Interview Required Yes

OT Allowed No
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0832
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Apps Designer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term W2 contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST BE A U.S. CITIZEN****

Required Skills:
- Must have at least 2 years of Salesforce Administrator experience
- Must have experience collaborating with a Salesforce.com development team
- Prefer candidate with experience configuring a new implementation
- Prefer candidate with Salesforce Administrator certification

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job and 6 years experience as an IT professional with broad experience across multiple IT disciplines or 4 years specific system configuration, development and deployment experience.

Position Purpose:
Designs, develops, tests and implements application software including client, server and middleware. This includes designing and building algorithms and data structures and application performance monitoring and tuning.

Principle Duties and Responsibilities:
Essential Functions: 1. Creates software design at the component level based on the application architecture and the detailed business requirements. 2. Develops algorithms and data structures 3. Develops strategies for the monitoring, preventive maintenance and disaster recovery of applications. 4. Serve as technical expert in at least one application within a portfolio. 5. Assures that solution designs meet requirements for scalability, performance and quality in accordance with negotiated service level agreements. 6. Participates in the assessment and resolution of software defects. 7. Assists project management with the development of work breakdown structures, project plans and skills required. to develop and implement applications. 8. Participates in design reviews for implementation projects. 9. Conducts technical evaluations. 10. Participates in the review, business case development and implementation of software development tools, methodology and software development standards. 11. Understands IS Security measures and current standards, practices and technology.

Additional Functions: 1. Serves as liaison with suppliers for sustaining activities. 2. Assists with evaluation and recommendations regarding purchased software packages, and supporting services. 3. Using knowledge of technology and existing systems, mentors junior staff on building and maintaining application systems. Perform other duties as assigned.

Other Requirements: 1. Expert in one or more software development languages. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Solid understanding of system lifecycle methodologies, software development tools and standards. 4. Experience working in teams. 5. Proficiency with an Integrated Development Environment (IDE) desired. 6. Proficiency with MS Office. 7. Ability to solve problems quickly and completely. Ability to identify tasks which require automation. 8. Strong inter-personal and communication skills; must be capable of explaining complex procedures in writing or verbally. Must be able to write proposals and make presentations to internal customers and professional peers. 9. Provides technical direction for application development teams. 10. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.

A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8913
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Sr. Mobile Developer

Description:
IT Sr Mobile Developer

Location: Savannah, GA
Pay Rate: $63/hr - $66/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
iOS and android native app development skills. ( Swift, Objective C, Java, HTML, NodeJS ) Experience with Xcode IDE, code repositories (Git), understanding of creating and consuming APIs. Prefer knowledge with JavaScript and React or Angular.

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eight (8) years of experience as an IT professional with broad experience across multiple IT disciplines.


Position Purpose:
Designs, develops, tests and implements complex enterprise applications software including client, server and middleware. This includes designing and building complex algorithms and data structures and application performance monitoring and tuning.

Principle Duties and Responsibilities/Essential Functions:
1. Creates complex software design at the component level based on the application architecture and the detailed business requirements. 2. Develops complex algorithms and data structures 3. Assists with the translation of logical data design to physical database design. 4. Develops strategies for the monitoring, preventive maintenance and disaster recovery of complex applications. 5. Serves as technical expert in one or more applications within a portfolio. 6. Assures that solution designs meet requirements for scalability, performance and quality in accordance with negotiated service level agreements. 7. Participates in the assessment and resolution of complex software defects. 8. Assists project management with the development of work breakdown structures, project plans and skills required. to develop and implement applications. 9. Participates in design reviews for implementation projects. 10. Conducts technical evaluations. 11. Leads the review, business case development and implementation of software development tools, methodology and software development standards. 12. Understands IS Security measures and current standards, practices and technology.

Additional Functions:
1. Serves as liaison with suppliers for sustaining activities. 2. Assists with evaluation and recommendations regarding purchased software packages, and supporting services. 3. Supports management in recruiting and hiring 4. Using knowledge of technology and existing systems, mentors junior staff on building and maintaining application systems. Perform other duties as assigned.

Other Requirements:
1. Expert in one or more software development languages. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Solid understanding of system lifecycle methodologies, software development tools and standards. 4. Experience working in teams. 5. Proficiency with an Integrated Development Environment (IDE) desired. 6. Proficiency with MS Office. 7. Ability to solve problems quickly and completely. Ability to identify tasks which require automation. 8. Strong inter-personal and communication skills; must be capable of explaining complex procedures in writing or verbally. Must be able to write proposals and make presentations to internal customers and professional peers. 9. Provides technical direction for application development teams. 10. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.
A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8848
Job Location: Savannah, GA
Rate: 63-66
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) - Secret Clearance

Description:
Information Systems Security Officer – Level 3 - Secret Clearance

Location: Sunnyvale, CA
Pay Rate: DOE
Duration: 3-4 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Skills Required
• Knowledgeable of information technology security technical principles, Information Assurance methodologies and concepts
• IS auditing experience
• Working knowledge of Security Technical Implementation Guides (STIG)
• Knowledgeable of Operating System security requirements
• Understanding of configuration management principles
• Must be a team player, self-motivated, and a quick learner
• Hands on experience with IA tools
• SIPRNet management experience
•Bachelor's degree and 9-15 years' experience or Master's degree and 7-13 years experience

Description:
'LMS Information Systems Cyber Security team is looking for an assertive and self-confident Information Systems Security Officer (ISSO) to partner with the program and government customers to perform the duties as a Secret Internet Protocol Router Network (SIPRNet) ISSO located at the LM-SPACE Sunnyvale, CA campus. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

The ISSO will oversee day-to-day information system (IS) security operations including hardware and software implementations. The ISSO carries out technical administration of IS and gives direction to the system administrators in accordance with internal LM and customer security requirements, primarily using National Industrial Security Program Operating Manual (NISPOM) guidance as it pertains to SIPRNET and additional customer direction. Ability to work independently as well as in a teaming environment. Adaptable to diverse office situations, procedures and demands.
Job duties include:
- Develop, maintain, and update security documentation to include SSP, SCTM, Continuous Monitoring, POAMs, RAR, SAR, etc.
- Auditing of the IS, system administrators and program engineers
- Constant upkeep, monitoring, analysis, and response to network and security events.
- Documents compliance actions within the approved automated compliance tracking system or develops a plan of actions and milestones (POAM) maintained, and disposed of in accordance with internal security policies and practices outlined in the security plan.
- Ensures configuration management (CM) for security-relevant IS software, hardware, and firmware is maintained and documented in accordance with baseline.
- Ensures all information system security-related documentation is current and accessible to properly authorized individuals.
- Ensures records are maintained for workstations, software, servers, routers, firewalls, network switches, telephony equipment, etc. throughout the information system's life cycle.
- Evaluates proposed changes or additions to the information system, and advises the ISSM of their security relevance.
- Assist and conduct security IS education.
- Participates in internal/external security audits/inspections; performs risk assessments
- Leads investigations of computer security violations and incidents, reporting as necessary to ISSM
- Ensure proper protection and / or corrective measures have been taken when an incident or vulnerability has been discovered
- Develop, implement and enforce Information Security Policies and Procedures together with ISSM/FSO
- Develop and oversee Information Systems Security Plans / SSP (Certification/Accreditation) together with ISSM
 
Job Number: 8963
Job Location: Sunnyvale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer – Level 2

Description:
Location: Moorestown, NJ
Rate: $80.00 - $90.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Exempt
Per Diem Split: Possible

****MUST BE A U.S. CITIZEN****
****MUST HAVE AN ACTIVE SECRET CLEARANCE OR TO HAVE HAD ONE WITHIN THE LAST 2 YEARS****


Job Description:
- The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
- This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
- This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
- This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
- This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
- The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.


Skill/Experience/Education
Mandatory:
****MUST HAVE AN ACTIVE SECRET CLEARANCE OR TO HAVE HAD ONE WITHIN THE LAST 2 YEARS****
- BS Degree in Electrical Engineering or Electrical and Computer Engineering.
- Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
- Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
- Configuration management and change management experience using ClearCase, ClearQuest and UCM.
 
Job Number: 9358
Job Location: Moorestown, NJ
Rate: $80.00 - $90.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
International eCommerce Build & Deploy Leader

Description:
We are seeking for an International eCommerce Built & Deploy Leader for a well-known company in WA, state. This position will be responsible for oversight and administration of the code base that supports SAP Hybris Solution. The position requires a candidate to develop, oversee and maintain the build/release system which is comprised of branching, scripting, build configurations and compiled code deployments.

This includes build automations, auditing Web Server Configuration in non-production and production
environments. In addition, the Build Master will also spend time in development activities which includes enhancements and updates to the source code to get it streamlined and compatible for build automation, manual and automated deployments, troubleshooting and fixing issues in the source code for any build/release errors and compatibility issues.

Candidates must have hands on experience with build and release automated and manual processes for application deployment.

RESPONSIBILITIES

Responsible for architecting, maintaining, and streamlining the automated build and release process from code compilation, build definitions, to deploying releases to multiple environments
Technical Expertise in troubleshooting techniques for source code compilation issues, automated build packages errors and deployment issues
Responsible for deployment quality and solving post-build issues
Coordinate & maintain source control branches and versioning of software branches such as master, develop, release and feature branches.
Perform integrations with merge conflicts
Have an in-depth understanding of the hosted server environments, the various applications deployed, the systems, the platforms supporting those and the 3rd party operational tools
Facilitating and championing the quick resolution of problems found during any build and deployment efforts to non-production or production
Creating and maintaining documentation of the build/release process by working with the Release manager
Investigating tools and processes and integrating them so that they can improve the reliability, stability and efficiency with which the build and release happens
Working closely with the development and Operations Support team to integrate new deployment processes and strategies to meet the new feature requirements
Work with the technical teams to automate build and deployment process through build system for all applicable applications and database scripts
Merge manual and automatic procedures into a single, highly-repeatable process
Design and configure continuous integration build system through collaboration with development and Operations Support teams
Working knowledge of Environment configuration management
Assist the Operations support Team with deployment responsibilities
Responsible for ensuring continuous maintenance of build servers which includes archiving of old packages, build retention policies, cleanups and other build agent configurations
Ability to do manual build and deployments whenever automation process do not work or it is still not yet ready for new applications
Ability to continually learn new techniques, research and bring in new technologies, process and techniques relevant to the work
Coordinate full and partial builds that may only include certain subsystems of the entire application
Work with the DevOps / Infrastructure team to assess, audit and maintain environments
Work with the project and release management to ensure targeted release dates are achieved
Create implementation and recovery plans for releases
Handle appropriate communication both prior to and following all releases with all technical / devops teams
Audit and Accountability Responsibility for Infrastructure(s) / Environment(s)
Atlassian Administration - Permissions Management (Confluence, JIRA, GIT, Stash, Bit Bucket, etc.)


REQUIREMENTS

Expertise in GIT based source code management and build definition setups
Good experience in creating build and release process documents
Expert in source code branching techniques and maintenance of those
Expertise in Release automation management tools for single and multiple environment deployments
Ability to troubleshoot and fix compilation issues in the source code when required
Must possess strong application support troubleshooting skills
Experience with Continuous Integration and Deployment using tools such as: Xebia Labs, Jenkins, Chef, Bamboo or any other CI system equivalent
Experience with build and scripting tools such as ANT / NAnt, Maven, Perl, and UNIX shell scripting
Python scripting, Perl scripting knowledge.
Candidate having brief sanity test experience (Load SW on HW and perform testing)
Experience administering a source code management tool such as Subversion or Git
Excellent interpersonal and diplomatic skills as well as a positive attitude.
Must possess excellent customer service, communication skills and time management skills
Organized and deadline driven with the ability to track multiple tasks simultaneously
Able to effectively set priorities and work well under deadlines with a strong attention to detail
Adapts well in a team oriented, professional, fast-paced, dynamic environment
Handle confidential and sensitive matters with tact and diplomacy
Independent working, ability to learn the updates and new technologies quickly and as well to work as a team member
Must be able to develop good working relationships with colleagues, internal clients and management as well as work as an effective and integral team member
Strong communication skills, both oral and written, including presentation skills
Demonstrated team-building skills with ability to influence and motivate team members that report to other groups in the organization
Extreme responsiveness with a strong sense of urgency
Able to flex to support the changing needs of a release
Adept at assessing issues with ability to devise workable solutions quickly responding appropriately
Proven ability to support and collaborate with multiple Project Managers within a Program
Flexible, must be able to change priorities quickly, focus on new ones without distraction, able to deal with conflict and work under pressure to meet deliverable dates / timelines
Must have experience in negotiating timelines and deliverables with a strong sense of urgency
Program / Project Management experience managing medium/large scale projects using traditional agile development methodologies
Proven experience in Agile / DevOps methodologies
Must possess strong process knowledge of System Development Life Cycles
Experience with executing project governance including change control and issue/risk management
Working knowledge of Project Management Tools (Confluence, JIRA, Microsoft Project, SmartSheets, etc.)
Must be able to adjust work hours to accommodate global teams
Ability and willingness to travel globally
24 x 7 x 365 operations - evening, weekend, and holiday work will be required Recommended skills, abilities, and certifications
Experience in eCommerce Solutions (specifically Hybris eCommerce Platforms)
Experience with projects focused on infrastructures and software solutions
2-5 years of retail business knowledge
Project Management certification and/or demonstrated core project management skills based on familiarity with the Project Management Body of Knowledge (PMBOK)
Proficient in the use of the Google products: email, spreadsheet, document, presentation, analytics
Knowledge of French, Spanish, Korean, Mandarin a plus
 
Job Location: Issaquah, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
JAVA Software Engineer (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Rockwell Collins is currently seeking qualified candidates for a JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 3 years of hands on coding in Java using industry standard Object Oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Experience designing, configuring and developing complex system architectures using Virtual Machines (VMs), going beyond just setting up or doing application development on VMs

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents).

  • Understanding of Network Management fundamentals

  • Working knowledge of scripting languages such as Perl, bash, etc

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13943
Job Location: Richardson, TX
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Engineer - Military Platforms (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • Our expertise in flight deck avionics, cabin electronics, mission communications, information management, and simulation and training is strengthened by our global service and support network that spans 27 countries.

  • Working together, our global team of 20,000 employees shares a vision to create the most trusted source of communication and aviation electronics solutions, applying both insight and foresight to help our customers succeed. We are currently seeking qualified candidates for a Senior JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 5 years of hands on coding in Java using industry standard object oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Familiarity with virtual machine environments and their usage in complex system architectures

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Experience with setup/configuration of virtual machine environments (such as VmWare or equivalents)

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents)

  • Experience with Ethernet-based interfaces/protocols (IPv6 and SIP), serial interfaces, etc.

  • Understanding of Network Management fundamentals

  • Experience using SNMPv3 to monitor/control equipment

  • Working knowledge of scripting languages such as Perl, bash, etc.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14003
Job Location: Richardson, TX
Rate: 75-85
Per Diem: Yes, Split
Overtime: Some
Duration: 16 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Embedded Software Engineer

Description:
Lead Software Engineer

ENEA…an environment where you can innovate.

This is a Contract-To-Hire Opportunity located in Mesa, AZ.

The most successful candidate will have 7-10+ years of RECENT C/C++ Windows embedded development.

It is preferable that you have experience developing within FDA standard protocols & regulations but we may consider an individual who is otherwise qualified and has worked under strict or safety-critical embedded development. This person will need to understand not only the similarities of the standards but also the differences.

Essential Functions:

Full lifecycle software development, including design, implementation, test and qualification of embedded software for FDA Certified Medical Devices
Capture requirements to ensure code meets customer expectations
Identify, evaluate and implement tools and processes to continually improve the software development process
Conduct code reviews and apply best practices and coding standards

Required Skills/Qualifications/Competencies:

BS in Computer Science or related degree
7-10+ years of hands-on experience with C/C++ on a Windows platform
Object Oriented software development
Strong documentation experience
Ability to work with little direct supervision, independently or in small teams
Excellent organizational and documentation skills
Good verbal and written communication skills
Able to communicate effectively with remote team members
Strong self-motivation and initiative
Capable of working on both high and low level software
The versatility to contribute to upfront requirements, architectural design, implementation and integration with full documentation

Preferred Skills/Qualifications/Competencies

Medical device development experience
Debugging hardware using software
Manufacturing line control or test software
Experience with any of the following: Win32, MFC, Windows Embedded, USB development, LabVIEW.
We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.
OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: 595
Job Location: Phoenix, AZ
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 with active secret CA

Description:
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2


Duties:

Additional Information: CANDIDATES NEEDED! Manager is active. Active Secret clearance required or active within last 2 years.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years **



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEERAEROSPACEACTIVE SECRET CLEARANCE

State/Province: California
City/Town: Canoga Park

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386
Job Location: Canoga Park, CA
Rate: 50-66/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required

ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: Mojave, CA
Rate: $65.00
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S6820283

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S6820283
6+ Month Contract

Pay rate : $50-60/hr W2

Job #S6820283 • Must have an active secret clearance with an investigation within the last 4.5 years (or 4 years 6 months)

Responsibilities include but are not limited to the following:
• Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system)
• Insure models and drawings meet all department standards and customer requirements.
• Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members.
• Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements.
• Work with internal customers to concept needed support equipment for new and existing programs.
• Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules.
• Review models, drawings and designs for manufacturability.
• Ability to effectively problem solve with a team.
• Support continuous improvement both personal and as a team.
Requirements:
• 4 year BS Design and Drafting or equivalent experience
• Working knowledge of GD&T.
• Knowledge of MS Office.
• Familiar with machine design and aircraft tooling.
• Ability to work in a team environment.
• Ability and willingness to work overtime as necessary is required.
• Experience with model checking for accuracy and model integrity.
• Experience with creating drawings.
• CATIA V5, TcUA, NX or other 3D modeling software a plus.
 
Job Number: S6820283
Job Location: Clearfield, UT
Rate: 60
Per Diem: split
Overtime: poss
Duration: 6+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Our electronics manufacturing plant is looking for a mid level Manufacturing Engineer with at least 7 years of experience in CCA design for manufacture and fabrication.  Candidates should display the ability to work well within a team environment and foster positive working relationships with people from diverse job classifications and backgrounds.  The candidate should possess the flexibility to positively impact a wide variety of CCA processes in a fast paced manufacturing environment.

Engineering Processes:

Authoring electronic work instructions to comply with design requirements

Performing DFM reviews to include panel/PWB design  and applying knowledge of manufacturing design best practices

Driving efficiency and quality improvements in a high mix/low volume environment

Selecting and driving procurement of capital technologies to improve capabilities

Designing/procuring SMT solder stencils to support production needs

Analyzing quality trends and implementing corrective actions

Performing failure analysis to include root cause determination

Developing manufacturing controls to handle sensitive CCA materials

Determining and program appropriate reflow profiles for SMT boards

Setting up and structuring manufacturing Bills of Material (Oracle experience preferred)

Programming/Daily Processes:

Providing technical support to production to ensure that goals are met

Generating SMT programs for hands on operators to run (Siemens/Siplace experience preferred)

Programming solder paste application/inspection equipment

AOI programming for automated inspection (Yes Tech experience preferred)

Selective solder programming (Juki experience preferred)

Programming x-ray for automated inspection (GE experience preferred)


Other Duties:

Support a production team and help to implement process improvements

All other duties as assigned

Position Requirements Candidate should possess a Bachelors Degree in an Engineering discipline preferably Manufacturing with a minimim of 7 years applicable experience.

Candidate should also possess;

Proficiency and experience with Valor DFM software is a big plus

Experience with manufacturing under government contracts is preferred

Experience in high mix, low volume operations is preferred

Candidates should possess a strong technical knowledge and the ability to effectively communicate with all levels of the organization

Knowledge of the Microsoft Office Suite of products and general computer proficiency is required

Candidates must demonstrate effective verbal and written communication

Experience with Lean manufacturing concepts (LSS GB, BB, ETC)

Be able to obtain a security clearance
 
Job Number: 42343
Job Location: Tallahassee, FL
Rate: Open
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 1-Electrical/Electronics

Description:
Manufacturing Engineer 1

Location: Ridley Park, PA
Duration: 6 months

Description:
Supports the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) to support the integration of technical solutions across multiple disciplines. Supports the development, identification and implementation of conceptual designs and maintenance of the program architecture for build. Participates in the implementation of manufacturing plans. Investigates technical problems. Participates in the implementation of Lean principles and technologies. Interfaces with IPTs and internal customers to develop products, skills, knowledge and experience.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. Additionally, ABET is the preferred, although not required, accreditation standard.

Skills:
Preferred Qualifications- Experience working with manufacturing process.
Experience with Microsoft Office, Excel and PowerPoint.

Skills:
Category Name Required Level
Software Skills MS Excel No Novice
Software Skills MS PowerPoint No Novice

Skill Code:
66T-Electrical/Electronics
 
Job Number: 18-09741
Job Location: Ridley Park, PA
Per Diem: possible
Overtime: possible
Duration: 6 months
Start Date: 7/2/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 2

Description:
Please share updated resume at ravi@iconma.com

Manufacturing Planner 2

Location: Ridley Park, PA
Duration: 6 months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Assists in reviewing supplier data to ensure manufacturing related requirements are met. Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements. Assists in tooling dispositions. Investigates and resolves manufacturing related issues of limited scope. Assists with producibility assessments for part or product designs. Assists in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops work statements and sequencing of events to support delivery commitments. Assists in the review, maintenance and monitoring of internal documents. Works under general supervision.

Education / Experience:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Preferred Qualifications
Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.

Skills:
Category Name Required Level
Software Skills MS Excel No Novice
Software Skills MS Office No Novice
Software Skills MS PowerPoint No Novice
Software Skills PDM No Novice

Skill Code:
67B-Electrical/Electronics
 
Job Number: 18-09738
Job Location: Ridley Park,, PA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mastercam Programmer IV / local only CA

Description:
8253386
Job Title: Mastercam Programmer IV

Number of Positions: 1

Remaining Positions: 1

Duties:


Looking for candidates who are open to converting to Aerojet employees eventually.


** Phone interview, followed by an In-Person interview is required. Candidates must be able to attend an in-person interview at their own expense **



** As part of the in-person interview candidates will be required to take a written test along with creating an NC program from 3D models using NX including Vericut verification **



** Selected candidates who perform well will be converted to a direct employee **





Required (Please screen for these items and make sure the experience is accurately reflected on resumes):



** Expertise in Mastercam Version X – 2018 **



** Expertise in Turn-Mill, 3, 4 & 5 Axis Milling, Horizontal and Vertical Lathes, programming of high

temp alloy materials **



Shall be responsible for creating new CNC programs, setup instructions, prove-out of new technologies, first article inspection review and error resolution, fixture design, modify existing CNC programs, as well as project estimating.
Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
Shall closely interact with Process Engineers, Manufacturing Engineers and Machinists to ensure that error-free first-time-through CNC programs are created and delivered to Manufacturing within required delivery dates.
Make proper cutting tool selections; taking into consideration such factors as workholding device, material type, material removal volume, speeds, feeds, and machine tool imitations.
Use Vericut machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and error-free first-time-through CNC machining processes.
Develop, write probe logic macros to perform on machine touch probe measuring, work offset updates, cutter offset updates, and part feature data collection.
Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Proficient in Mastercam Version X – 2018 CNC programming is required **



** Proficient in Lathe, Mill-Turn, and up to 5 axis Mill CNC programming of high temp alloy materials is required **



** Proficient in cutting to selection to support CNC programming is required **





Preferred Requirements:



-Proficient in Siemens NX9-NX11 NC programming is desired

-Proficient in Vericut CNC machining simulation is desired

-Proficient in Type II macro CNC Programming is desired

Education:
Preferred: Bachelor’s degree with 10 -15 years of CNC machining and programming experience. Will accept equivalent experience in lieu of degree, consideration is on a case by case basis.

Skills:
Required
MASTERCAMCNC MASTERCAMCNC PROGRAMMINGCNC PROGRAMMING 5 AXISLATHE MILL
Additional
LATHE

State/Province: California
City/Town: Canoga Park

Start Date: 07/02/2018 Hours Per Week: 40.00
Est. End Date: 07/02/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8253386
Job Location: Canoga Park, CA
Rate: 50/hr max
Per Diem: no - local only
Duration: 12 months
Start Date: CTH possible
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
'Must be able to acquire DoD Secret clearance, but can start without clearance or with Interim Secret clearance.”

Selected candidate will perform conceptual, detail structural design, analysis, testing and producibility of system components. Candidate must be proficient in the use of Catia AND Creo large model assemblies, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers. The candidate will be required to work closely with Production Operations to develop producible solutions.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 42387
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Eglin AFB, FL
Rate: $35.00 - $55.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Description
CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY. This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- Experience with Catia V5 3D parametric modeling and drafting
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives
- Active DoD secret clearance

Desired:
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software
 
Job Number: 9636
Job Location: Crestview, FL
Rate: $35.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Responsibilities



  • Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable

  • Perform autonomously under the direction of team leaders, program management and engineering management

  • Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach

  • Contribute to schedule creation and ensure schedule commitments are met

  • Create and present program and/or task status presentations to team members and engineering management

  • Create and present clear and concise technical descriptions to engineering leadership and customers

  • Mentor junior engineers and provide guidance to design manufacturing team members

  • Provide input to design and document reviews

  • Spearhead investigations for open ended complex problems

  • Develop detailed hardware requirements based on product theory, system level requirements and customer requirements

  • Complete designs that meet documented hardware requirements

  • Create test procedures to support the testing of products to industry and government standards

  • Review hardware defects and identify systemic root causes and process improvements


 


Basic Qualifications



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering

  • US Citizenship or Permanent Resident (Green Card) required

  • Experience in mechanical engineering design and development

  • Knowledge of engineering materials and processes

  • Experience with structural and thermal management design

  • Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)

  • Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles

  • Strong technical, analytical and problem solving skills

  • Ability to effectively communicate throughout all levels of the organization


 


Additional skills or experience a plus:



  • Packaging of electronic and/or precision optical systems

  • Design of manufacturing, calibration and test support equipment

  • Aluminum fabrication techniques including: machining & investment casting

  • Experience in avionics or aerospace industry

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14060
Job Location: Wilsonville, ORE
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Electro/Mechanical Testing

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Mechanical Engineer is responsible for overseeing the development and implementation of complex test equipment solutions, hardware and software, for use in testing Electro-mechanical Systems and Cabin Systems products in support of Engineering, Operations, Service locations and airline customers.

  • The Mechanical Engineer will take direction from the Test Equipment Senior Engineering Manager to complete test equipment bids, define requirements, development activities, integration, validation, documentation, project execution and Test Engineering supporting efforts. 


 


RESPONSIBILITIES INCLUDE: 



  • Lead the development of test equipment hardware and software for testing both new and legacy products. This includes Planning, design, integrate, verification, validation, and documentation activities for relatively simple to moderately difficult test solutions for both new and legacy products.

  • Develop test solutions bids by providing accurate cost and schedule estimates along with technical descriptions of proposed test solutions.

  • Follow Life Cycle Test Strategy Development guidelines to provide cost effective test solutions utilizing modularity and reuse whenever possible.

  • Support outsourcing efforts per ARINC-625 test equipment development outsourcing standard


 


EXPERIENCE REQUIRED: 



  • Must be capable of requirements generation, development, design, and drafting of complex test equipment utilized for testing of electro-mechanical aerospace products including; flap actuation systems, Horizontal Trim Stabilizer Actuators (HSTA's), and Pilot Controls Systems. Candidate should be experience with product testing which includes manufacturing assembly and test, Endurance and Fatigue testing based on customer requirements. Must have in-depth understanding of both MIL-STD-810 (military) and RTCA/DO-160 (commercial) specifications and ARINC 625-2 (Test Equipment Development). 

  • Must have an in-depth understanding of following principals and equipment: Kinematics, metallurgic properties, stress and structural analysis, RVDT's, LVDT's, load cells, load cell amplifiers, Programmable Logic Controllers (PLC's), DC Brushless Motors/ Controllers and National Instruments data control/acquisition hardware and associate software. 

  • Must have experience using electrical, mechanical and hydraulic test measurement equipment, Ansys 4.5, Unigraphics NX6, Autocad, and Solid Works Mechanical Design software and desktop PC applications programs including MS Word, Excel, Power Point, Visio and MS Project. Additionally, experience in programming while using National Instruments Labview for Windows, C, C++, C# programming is a plus.

  • Must be able to read and interpret mechanical assembly drawings and hydraulic, mechanical and electrical schematics.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14043
Job Location: Irvine, CA
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Electro/Mechanical Testing

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Mechanical Engineer is responsible for overseeing the development and implementation of complex test equipment solutions, hardware and software, for use in testing Electro-mechanical Systems and Cabin Systems products in support of Engineering, Operations, Service locations and airline customers.

  • The Mechanical Engineer will take direction from the Test Equipment Senior Engineering Manager to complete test equipment bids, define requirements, development activities, integration, validation, documentation, project execution and Test Engineering supporting efforts. 


 


RESPONSIBILITIES INCLUDE: 



  • Lead the development of test equipment hardware and software for testing both new and legacy products. This includes Planning, design, integrate, verification, validation, and documentation activities for relatively simple to moderately difficult test solutions for both new and legacy products.

  • Develop test solutions bids by providing accurate cost and schedule estimates along with technical descriptions of proposed test solutions.

  • Follow Life Cycle Test Strategy Development guidelines to provide cost effective test solutions utilizing modularity and reuse whenever possible.

  • Perform concurrent test development with product development by coordinating with product development teams to direct design for testability, documenting test requirements, and generating test procedures for final product acceptance.

  • Work with Operations and Engineering to develop test solutions required for Qualification and Acceptance testing, and ESS/HASS/HALT testing the product in accordance with manufacturing test plans. 

  • Provide prompt test equipment support for legacy systems for Operations, Service locations and Product Support to minimize product stop shipments.

  • Support outsourcing efforts per ARINC-625 test equipment development outsourcing standard along with Rockwell Collins policies and procedures.


 


EXPERIENCE REQUIRED: 



  • Must be capable of requirements generation, development, design, and drafting of complex test equipment utilized for testing of electromechanical aerospace products including; flap actuation systems, Horizontal Trim Stabilizer Actuators (HSTA's), and Pilot Controls Systems. Candidate should be experience with product testing which includes manufacturing assembly and test, Endurance and Fatigue testing based on customer requirements. Must have in-depth understanding of both MIL-STD-810 (military) and RTCA/DO-160 (commercial) specifications and ARINC 625-2 (Test Equipment Development). 

  • Must have an in-depth understanding of following principals and equipment: Kinematics, metallurgic properties, stress and structural analysis, RVDT's, LVDT's, load cells, load cell amplifiers, Programmable Logic Controllers (PLC's), DC Brushless Motors/ Controllers and National Instruments data control/acquisition hardware and associate software. 

  • Must have experience using electrical, mechanical and hydraulic test measurement equipment, Ansys 4.5, Unigraphics NX6, Autocad, and Solid Works Mechanical Design software and desktop PC applications programs including MS Word, Excel, Power Point, Visio and MS Project. Additionally, experience in programming while using National Instruments Labview for Windows, C, C++, C# programming is a plus.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14044
Job Location: Irvine, CA
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer Level 4

Description:
Description

The successful candidate will provide product engineering support to PWB/CCA design activities for Ground base, AirBorne, surface ship and under seas programs. Candidate will interact with PWB designers, and electrical/mechanical engineers and production facilities.
Candidate will work as a member of Integrated Product Development teams throughout the design process to ensure PWB/CCA designs are optimized for manufacturing.
Perform DFM (Design for Manufacturing) reviews of PWB/CCA designs to ensure producibility goals are met within technical, cost and schedule requirements.
Support the transition of designs to manufacturing by providing technical support to both internal and external facilities.
Assist in the resolution of design issues identified during production. Keep DFM standards up to date with improvements in manufacturing process capabilities.
Perform trade studies
Skill/Experience/Education 

Mandatory:

The candidate must have previous experience and knowledge of manufacturing processes and materials related to PWB/CCA designs and production.

Candidate must be familiar with military systems design/production processes.

Knowledge of industry standards and common practices including but not limited to IPC-2221, J-STD-001, IPC-610, IPC-6012, IPC-600, IPC-6013 and the standards specified within them.

Work in a team environment as well as independently.

Candidate must have well developed communications skills and be able to communicate effectively at all levels including outside PWB design and manufacturing facilities.



Desired:

In-depth knowledge of PWB fabrication and assembly processes.

Familiar with manufacturing processes for high density interconnect (HDI) designs.

Ability to identify and evaluate complex sets of dependent PWB fabrication and assembly processes and develop creative solutions.

Familiar with Zuken and Cadence CAD tools. Experience evaluating design with DFM software tools such as ADIVA or Valor.
 
Job Number: 54200
Job Location: Liverpool, NY
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: Mojave, CA
Rate: Up to $65.00-DOE
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
Mechanical Engineer to design, develop and release system, subsystem componentry, to include component mounting brackets or provisions for various vehicle systems, subsystems devices

Ability to Design and Integrate Fuel, Hydraulic (strong desire), or Automatic Fire Extinguishing (AFES) Subsystems and components into military vehicles

Familiarity with hydraulic hose, tube and fitting standards



Should be able to select and integrate shock isolation mechanisms to meet specific vehicle of component requirements

Ability to design articulating, locking or sliding provisions to Human Factors requirements

Must have CAD software experience in Pro-E or UG's NX

Performing failure analysis
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer IV - Numerical Programmer - (WA)

Description:
Provides expertise in numerical control, machining, programming and Design For Manufacturing and Assembly (DFMA) in support of new and ongoing projects. Establishes technical requirements for manufacturing and producibility. Plans and guides the development and integration of machining techniques, manufacturing methods, processes, software and equipment to support the design, manufacture and inspection of parts and assemblies. Identifies equipment and approaches, coordinates and assigns work and trains/mentors others.

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: NCIVEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Programmer IV / Proficient in Siemens NX9-NX11 CNC programming is required / Turn-Mill, 3, 4 & 5 Axis Milling, Horizontal and Vertical Lathes, programming of high temp alloy materials / Vericut / local only CA

Description:
8253347
Job Title: NX Programmer IV

Number of Positions: 1

Remaining Positions: 1

Duties:




** Phone interview, followed by an In-Person interview is required. Candidates must be able to attend an in-person interview at their own expense **



** As part of the in-person interview candidates will be required to take a written test along with creating an NC program from 3D models using NX including Vericut verification **



** Selected candidates who perform well will be converted to a direct employee **




Required (Please screen for these items and make sure the experience is accurately reflected on resumes):



** Expertise in Siemens NX9-NX11 **



** Expertise in Turn-Mill, 3, 4 & 5 Axis Milling, Horizontal and Vertical Lathes, programming of high temp alloy materials **



** Vericut experience **



Shall be responsible for creating new CNC programs, setup instructions, prove-out of new technologies, first article inspection review and error resolution, fixture design, modify existing CNC programs, as well as project estimating.
Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
Shall closely interact with Process Engineers, Manufacturing Engineers and Machinists to ensure that error-free first-time-through CNC programs are created and delivered to Manufacturing within required delivery dates.
Make proper cutting tool selections; taking into consideration such factors as workholding device, material type, material removal volume, speeds, feeds, and machine tool imitations.
Use Vericut machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and error-free first-time-through CNC machining processes.
Develop, write probe logic macros to perform on machine touch probe measuring, work offset updates, cutter offset updates, and part feature data collection.
Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Proficient in Siemens NX9-NX11 CNC programming is required **



** Proficient in Lathe, Mill-Turn, and up to 5 axis Mill CNC programming of high temp alloy materials is required **



** Proficient in cutting to selection to support CNC programming is required **





Preferred Requirements:



-Proficient in Vericut CNC machining simulation is desired

-Proficient in Type II macro CNC Programming is desired

Education:
Preferred: Bachelor’s degree with 10 -15 years of CNC machining and programming experience. Will accept equivalent experience in lieu of degree, consideration is on a case by case basis.


Skills:
Required
CNC PROGRAMMING CNC PROGRAMMING 5 AXIS SIEMENS UG NX LATHE MILL
Additional
LATHE

State/Province: California
City/Town: Canoga Park

Start Date: 07/02/2018 Hours Per Week: 40.00
Est. End Date: 07/02/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8253347
Job Location: Canoga Park, CA
Rate: 58/hr DOE
Per Diem: no / local only
Duration: 12 months
Start Date: contract to hire
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Optical Engineer

Description:
Candidates must be able to obtain a TS/SCI with Polygraph security clearance. Applicants

Designs, develops, builds and tests systems and products based on optic, photonic and laser technologies
Interacts with device, hardware and software design teams to assist in overall development of optical systems; specifying, selecting and qualifying active and passive optical components, developing and benchmarking system performance models, developing and implementing test procedures and/or evaluating and selecting appropriate test instrumentation
May provide recommendations for cost reduction efforts
Participates in electrical and optical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. optical loss, timing, power, etc.), design, integration, and verification of electrical components, equipment and systems
Applies principles and techniques of Electrical and Optical Engineering
Performs root cause analysis for electrical and optical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
Participates in design reviews of electrical and optical components, equipment and systems
Evaluates vendor capability to support product development
Applies a good understanding of the organizationally defined optical processes used throughout the lifecycle of the program or project
Supports the generation of engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
Contributes to the research and analysis of data, such as customer design proposal specifications, and manuals to determine feasibility of design or application
Selects components and equipment based on analysis of specifications and reliability
Plans sub tasks for activities described above

Considerable use of optical and electrical engineering concepts, principles, and theories
Considerable knowledge of telecommunication applications
Considerable knowledge of optical engineering processes
Keeps abreast of technology trends
Aware of business objective and Engineering role in achieving
Considerable knowledge of Microsoft Office applications
Considerable knowledge of electrical engineering design tools
Considerable written and verbal communications skills
Understands and begins to apply basic project management principles including IMS, earned value, and score cards
Considerable ability to recognize and clearly report information relevant to sound electrical engineering design
 
Job Number: 42365
Job Location: NJ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Oracle Database Developer - Secret Clearance

Description:
Job Description:

Looking for an experience Oracle Developer. Someone who can plan a data migration, read existing queries and perform SQL performance tuning, ETL, overall database design/architecture.



Requires a bachelor's degree in area of specialty and 4-6 years of experience in the field or in a related area.



Responsible for designing and implementing information systems which will adequately support the enterprise infrastructure of the organization. Analyzes system requirements and ensures that systems will offer security and will be effectively integrated with current applications. Ensures that all systems are working at optimal levels and offers support to application development department regarding new technologies and system requirements. Has thorough knowledge of infrastructure, application programming, and web and software applications. Familiar with a variety of the field's concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of tasks. Leads and directs the work of others. A wide degree of creativity and latitude is expected. Typically reports to top management.

 
Job Number: 18-20649
Job Location: Lexington Park, MD
Rate: 50.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-16 00:00:00.0
Start Date: 2018-06-18 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PHP Application Developer

Description:
Job Description:

Client is seeking an application developer to support the Air Force Research Laboratory in the development of custom software utilities, to include interface modules required for the AFRL Enterprise Business System (EBS). The selected candidate will coordinate with AFRL leadership, the EBS Program Office, and any other offices necessary to accomplish these tasks.



Duties will include the following:

Assist Directorate customers in developing business or productivity applications, including: documenting requirements and specifications, identifying solutions, and acquiring, implementing, documenting, training, testing and validating applications.

Develop Windows-based client applications to include connections to Oracle, Microsoft SQL or other database systems employed by the Directorate.

Develop Web applications using accredited software and Web development tools.

Perform database administration of Directorate database resources.

Develop and maintain public web site content in accordance with all required AF regulations working in coordination with the 88th Comm Group and Public Affairs.

Develop and maintain internal web site content for AFRL.



BS in a computer technical field is preferred; however, years of experience may be substituted for a degree.

Security Plus Certification is preferred with a DoD SECRET security clearance. DoD is not a must have requirement.



Experience in the following programming languages is highly desired:

PHP, Laravel Framework, and MS-SQL Database.

Experience in developing within an iBPMS platform (such as Pega) is a plus, but not a requirement.

Although a candidate with Security Plus Certification and a security clearance is preferred, we will work with otherwise highly qualified candidates with the right skillset to achieve these requirements after their hire date.

 
Job Number: 18-23458
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-12-28 00:00:00.0
Start Date: 2018-07-02 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Pilot Controls Systems Engineer

Description:


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems






 
Job Number: R13922
Job Location: Irvine, CA
Rate: 60-70
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Aerodynamics Engineer

Description:
Provide technical leadership for the Aerodynamics group.
Lead development of Aerodynamic requirements for other vehicles based on customer requirements.
Lead the development of processes to support Aerodynamic analysis
Coordinate with ground test and flight test teams to support the qualification for entry into customer service and lead the creation of test plans to support these activities.
Coordinate with management, engineering and other integrated product team staff regarding vehicle design, analysis and testing.
Provides technical mentoring to junior engineers in all technical areas.
Support loads event simulation model development and validation of handling qualities, stability, and control criteria for suborbital space missions
Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
Works with other engineering groups to ensure proper application of design and P&HQ requirements
Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
Develop standardized analysis and reporting tools
Perform model updates from data collected during vehicle or component testing and data created with analytical tools
Develop and maintain P&HQ databases for use in analysis during all flight phases
Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
Air Data Experience
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Anticipates and resolves issues by developing standards and guidelines for diverse engineering activities
Ability to problem solve with a balance of technical product, cost, and schedule
Determines technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative
Maintains current knowledge of developments in the field of specialty and/or other related spacecraft innovations to improve quality and effectiveness of product


Required:
Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 15 years of experience in aerodynamics development
Experiences in wind-tunnel and flight test aerodynamic model validation
Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
Test plan development and data analysis experience a strong plus
Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
CATIA V5 experience preferred
Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods

The Structures Company is an AA/EOE.
 
Job Number: 210
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Duration: 9+ Month/Permanent
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer / no clearance CA

Description:
8218516
Principal Software Engineer
El Segundo, CA
no clearance
open rate
12-18 months

Need a senior STE SW developer. This is still a technical contributor, but must have requirements and design experience. Must be able to prepare Test and Integration Plans and Test Procedures. They will help lead the unclassified portion of STE design and development.

Job Description:
Advanced software technologies are critical to Raytheon’s Space and Airborne Systems’ strategic business areas – Advanced Concepts & Technologies (ACT), Electronic Warfare Systems (EWS), Integrated Communication Systems (ICS), Intelligence, Surveillance and Reconnaissance (ISR), Secure Sensor Solutions (S3), and Space Systems (SS).
Our Space Programs lead the industry in demonstrating the speed and agility required for next generation responsive space missions. A qualified candidate for the Space Programs will apply technical principles, theories, and concepts associated with software development and design for Special Test Equipment to verify Flight Hardware and Software at Board, Unit, & System level. Primary responsibilities include requirements management/development, software architecting and preliminary design, coding & unit testing, orchestrating Test Equipment to stimulate and instrument Flight Unit Under Test (UUT). Additional responsibilities include: software development of command, control, and telemetry of various space-based sensors and control mechanisms, and system, unit, and module software test activities.
The candidate must be a self-starter, have the ability to work independently, and the ability to manage personal workload to meet assigned deadlines. The candidate should have experience successfully working in a collaborative environment. The candidate will be involved with the planning, conduct, and coordination of software designs, software architecture, and documentation.
Required Skills:
• Experience in C/C++
• Experience with Test Development Environments (LabWindows/CVI, LabVIEW, TestStand)
• Experience with Test Equipment interface with GPIB, Spacewire
• Experience with Test Station Integration and Diagnostics
• Experience in the overall product integration, validation, and verification of the System
• Experience in the preparation of Test Plans, Integration Plans and Test Procedures

• Experience in full life-cycle software development, implementation, design and overall architecture
• Expertise writing Software Requirements Specifications and Preliminary design development
• Experience with software test activities
• Experience Assuring Product under test meets the design and performance requirements in accordance with the build plans, the User needs, and Customer expectations
• Working knowledge of DOORs
• Experience presenting to and interfacing with both internal and external customers
• Minimum 8 years of related technical individual contributor experience in large team software engineering development
• US Citizen
Desired Skills:
• Experience with Space Flight test and Integration
• Experience with software implementation of timing and controls
• Experience with Built in Test (BIT) implementation
• Experience with Configuration Management tools
• Experience with automated test tools, techniques, and practices
• Experience with tools such as RHAPSODY, JIRA, VectorCast, and GoogleTest
• Experience with Agile-Scrum methodology
• Understanding of software development best practices and processes
• Knowledge of MS Office or other presentation tools

Required Education:
BS or higher degree in Engineering, Science, Mathematics, Physics, or equivalent.
Hours: 8:00am to 5:00pm
Location: El Segundo CA United States

Contractor Work Week 5/40
Bachelor Degree Required? Yes

U.S. Citizen Required? Yes
 
Job Number: MB-R8218516
Job Location: El Segindo, CA
Rate: open
Per Diem: no
Duration: 12-18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - Clearance / GPS CA

Description:
8290300/162008

Job Title: Principal Software Engineer - Clearance


Work Site Address: El Segundo CA
Job Number: 8290300
Max Pay Rate: OPEN
Start Date: ASAP
End Date: 12-18 Months
Position Type: Contract

Job Summary
The Space, GNS (Global Positioning System & Navigation Systems) and STE (Special Test Equipment) Department is a key strategic member of the Software Engineering Center. The SGNSS Department develops and delivers industry-leading Space, GNS & STE technologies. We exceed our internal and external customer expectations by proactively offering superior functionality and serve as a rapid responder to their needs. We diligently adhere to Raytheon’s values of People, Integrity, Commitment and Excellence.

GNS programs provide affordable Position, Navigation and Timing (PNT) solutions by leveraging our existing products and technologies, focusing, research and developments, and expanding our strategic customer and supplier partnerships. GNS Programs also support all elements of military Global Positioning System (GPS) technology including aircraft GPS navigation, weapon GPS/Inertial Navigation System (INS) guidance and advanced technology programs. GNS Programs support a variety of applications such as amphibious assault vehicles, aviation, maritime, munitions and handheld devices.

Job Description

Roles and Responsibilities
GNS area programs is looking for senior software team member specialized in Special Test Equipment development to provide testing of GPS Receiver development project in support of the Government’s effort in the modernization of the GPS User Segment and Airborne GPS Receivers. Primary responsibilities include requirements management/development, software architecting, and preliminary design for Special Test Equipment at the system, unit, and module levels and software test IV&V. Additional responsibilities include: test-software development of command, control, and telemetry of various control mechanisms. A qualified candidate for GNS Programs would possess proficiency with C/C++.

Typical job functions for the Senior Software Engineer position in the SGNS Department include planning, conduct, and coordination of software designs, software development, documentation, testing, and debug of software that contains logical and mathematical solutions to business/mission problems. Our Software Engineers apply the appropriate standards, processes, procedures, and tools throughout the development life cycle as well as correct program errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities to resolve questions of program intent.

Qualifications and Education Requirements
The candidate must be a self-starter, have the ability to work independently, and the ability to manage personal and small team (2-3 people) workload to meet assigned deadlines. The candidate should have experience successfully working and leading in a collaborative environment. The candidate will be involved with the planning, conduct, and coordination of test software designs, test software architecture, and documentation.

**U.S. Citizenship status is required as this position needs an active U.S. Security Clearance as of day one of employment.**

Required Skills:
•Minimum 8 years of related technical individual contributor experience in a large team software engineering development
•Experience in C/C++
•Experience with Test Development Environments (Microsoft Visual Studios) •Experience with Graphical User Interface (GUI) development
•Experience with Interfaces: GPIB, Ethernet, USB, Serial, Firewire, Fibre Channel, ARINC 429, MIL-STD-1553
•Experience in full life-cycle software development, implementation, test, design and overall architecture
•Experience writing Software Requirements Specifications, Preliminary/Critical design development, and SW Requirements flow down and traceability
•Test Station Integration and Troubleshooting
•Experience with software test activities and planning
•Experience with software test activities and planning
•Strong written/oral communication and interpersonal skills
•Clearance
•Access to US only data

Desired Skills:
•Experience with GPS and/or Radar test and Integration
•Experience with software implementation of timing and controls
•Experience with Configuration Management tools
•Experience with tools such as JIRA and VectorCast
•Experience with automated test tools, techniques, and practices
•Experience with Agile-Scrum methodology
•Understanding of software development best practices and processes •Knowledge of MS Office or other presentation tools Required Education: BS or higher degree in Engineering, Science, Mathematics, Physics, or equivalent.
 
Job Number: MB-R8290300S
Job Location: El Segundo, CA
Rate: open
Per Diem: no
Duration: 12-18 Months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - Clearance CA

Description:
161752
Principal Software Engineer - Clearance - El Segundo CA - 8006788

Seeking a Senior SW Engineer with C/C++ development skills needed to support multiple programs.
Job Description

Roles and Responsibilities
Role and Responsibilities include the following areas:
• Execute to program requirements. Ensure that cost and schedule commitments are being met to ensure on time delivery of the end product deliverables
• Debug, troubleshoot, issue investigation, find root cause and provide corrective action determination to address integration issues
• Interface directly with Raytheon management team and customers in meetings and reviews
• Expand and influence program developments by working closely with the program managers and other engineers to process direction for the program
• Provide weekly reporting of key programmatic milestones in accordance with the program plan, while insuring risk mitigation throughout the program

Qualifications and Education Requirements
Required Experience, Knowledge and/or Skills:
• 8 years software development experience
• Proven experience performing as a Senior SW Engineer for software development teams
• Proven experience in using Green Hills Integrity
• Proven experience spanning software architecture, design and system integration with experience developing embedded software utilizing C and C++
• Proven experience in leading teams using Waterfall and/or Agile Scrum methodology
• Proven experience in writing software test plan and test procedures
• Ability to support engineering team members on various programs
• Ability to multi-task, to support multiple customers, and to work within specific schedule and cost constraints
• Strong organizational skills and ability to motivate and lead a team
• Possess and demonstrate excellent interpersonal, presentation and verbal/written communication skills
• Excellent time management skills
• Clearance
• Ability to access to US only data systems

Preferred Skills
Desired Experience, Knowledge, and/or Skills:
• Certified EVMS
• Experience working with IMS (Integrated Master Schedule)
• Experience with Green Hills Integrity
• Experience with KIV-7M product
• Experience with Raytheon’s Development Process
• Experience in Waterfall and Agile/Scrum, Continuous Integration Environments
• Experience with requirements management using DOORS
• Experience with configuration management using MKS and Git
• Software or Systems Engineering Integration expertise

Required Education Requirement: B.S. Computer Science, Computer Engineering, Software Engineering, Electrical Engineering or other Engineering discipline

Desired Education Requirement: M.S. in Computer Science, Computer Engineering, or Electrical Engineering
 
Job Number: MB-R8006788S
Job Location: El Segundo, CA
Rate: 80/hr max
Per Diem: no
Duration: 6 months
Start Date: CTH
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle Power Supply Engineer

Description:
ENEA…an environment where you can innovate.

The Qualified Principal Hardware Design Engineer will have military or space-level design experience, be skilled in power supply design, analysis, concepts critical to parametric variations and how environmental and mission use conditions affect hardware performance.

This is a contract position that will last ABOUT 8 months. You may have the option of working at our client site in the Tampa, FL or Redmond, WA area. OR you may have the ability to work out of Phoenix, AZ.

Essential Duties & Responsibilities

Designing Assigned Circuitry
Completing worst-case analyses
Reviewing analyses completed by other engineers to provide alternate design solutions for any non-compliance that is identified
Supporting testing of breadboards & prototypes of the design
Regularly Reporting any progress
Will be analytically modeling all circuits to consider least favorable parametric variations and environmental effects to include:
Radiation (if applicable)
Input & Output Limits
Operating Points/Environments
Initial Tolerance
Hardware will be designed in DxDesigner.
Analysis will be performed to level 3 utilizing ED22764 as a reference.

Knowledge, Skills & Qualifications

Bachelor’s Degree in Electrical Engineering is generally seen on the resume of a qualified candidate for this position but we will consider other technical/engineering degrees as well.
Experience in designing hardware for military or space industries
Must have 6+ years of experience in Power Supply Design & Analysis
Must understand & have experience analyzing parametric variations & environmental mission conditions
Ability to work under deadline driven pressure.
Skilled at prioritization and multi-tasking.

**PLEASE NOTE THAT OUR CLIENT IS CURRENTLY ONLY CONSIDERING US- PERSONS DUE TO ITAR REGULATIONS**



We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.

OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: HONPS
Job Location: Phoenix, AZ
Rate: Open
Per Diem: possible
Overtime: possible
Duration: 8mos
Start Date: July 1
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle Power Supply Engineer

Description:
ENEA…an environment where you can innovate.

The Qualified Principal Hardware Design Engineer will have military or space-level design experience, be skilled in power supply design, analysis, concepts critical to parametric variations and how environmental and mission use conditions affect hardware performance.

This is a contract position that will last ABOUT 8 months. You may have the option of working at our client site in the Tampa, FL or Redmond, WA area. OR you may have the ability to work out of Phoenix, AZ.

Essential Duties & Responsibilities

Designing Assigned Circuitry
Completing worst-case analyses
Reviewing analyses completed by other engineers to provide alternate design solutions for any non-compliance that is identified
Supporting testing of breadboards & prototypes of the design
Regularly Reporting any progress
Will be analytically modeling all circuits to consider least favorable parametric variations and environmental effects to include:
Radiation (if applicable)
Input & Output Limits
Operating Points/Environments
Initial Tolerance
Hardware will be designed in DxDesigner.
Analysis will be performed to level 3 utilizing ED22764 as a reference.

Knowledge, Skills & Qualifications

Bachelor’s Degree in Electrical Engineering is generally seen on the resume of a qualified candidate for this position but we will consider other technical/engineering degrees as well.
Experience in designing hardware for military or space industries
Must have 6+ years of experience in Power Supply Design & Analysis
Must understand & have experience analyzing parametric variations & environmental mission conditions
Ability to work under deadline driven pressure.
Skilled at prioritization and multi-tasking.

**PLEASE NOTE THAT OUR CLIENT IS CURRENTLY ONLY CONSIDERING US- PERSONS DUE TO ITAR REGULATIONS**



We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.

OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: HONPS
Job Location: Redmond, WA
Rate: Open
Per Diem: possible
Overtime: possible
Duration: 8mos
Start Date: July 1
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle Power Supply Engineer

Description:
ENEA…an environment where you can innovate.

The Qualified Principal Hardware Design Engineer will have military or space-level design experience, be skilled in power supply design, analysis, concepts critical to parametric variations and how environmental and mission use conditions affect hardware performance.

This is a contract position that will last ABOUT 8 months. You may have the option of working at our client site in the Tampa, FL or Redmond, WA area. OR you may have the ability to work out of Phoenix, AZ.

Essential Duties & Responsibilities

Designing Assigned Circuitry
Completing worst-case analyses
Reviewing analyses completed by other engineers to provide alternate design solutions for any non-compliance that is identified
Supporting testing of breadboards & prototypes of the design
Regularly Reporting any progress
Will be analytically modeling all circuits to consider least favorable parametric variations and environmental effects to include:
Radiation (if applicable)
Input & Output Limits
Operating Points/Environments
Initial Tolerance
Hardware will be designed in DxDesigner.
Analysis will be performed to level 3 utilizing ED22764 as a reference.

Knowledge, Skills & Qualifications

Bachelor’s Degree in Electrical Engineering is generally seen on the resume of a qualified candidate for this position but we will consider other technical/engineering degrees as well.
Experience in designing hardware for military or space industries
Must have 6+ years of experience in Power Supply Design & Analysis
Must understand & have experience analyzing parametric variations & environmental mission conditions
Ability to work under deadline driven pressure.
Skilled at prioritization and multi-tasking.

**PLEASE NOTE THAT OUR CLIENT IS CURRENTLY ONLY CONSIDERING US- PERSONS DUE TO ITAR REGULATIONS**



We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.

OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: HONPS
Job Location: Tampa, FL
Rate: Open
Per Diem: possible
Overtime: possible
Duration: 8mos
Start Date: July 1
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle System Integration Test Engineer

Description:
PRINCIPAL TEST ENGINEER—SYSTEM INTEGRATION

Primary Location: US-CA-San Diego Schedule: Full-time

Travel: Yes, 5 % of the Time Duration : 12 mos Contract-To-Hire

System Integration test engineering entails interoperability and performance testing across infuser products and clinical application software which are interconnected via wireless/wired network.

In this role, you will research, design, and develop tests that require knowledge across the domains of multiple system technologies and embedded systems.

You will drive system level test strategy across distributed teams in a highly regulated healthcare environment.

You will strive to enable automated test solutions that will support 24/7 continuous integration testing.

Essential Duties & Responsibilities

Plan and organize testing activities around project needs and timelines
Provide technical leadership in developing test automation for the system level tests across multiple infuser products and clinical application software
Develop test strategies to effectively test the software and hardware by using industry best practices and methods based on engineering analysis
Act as subject matter expert in reporting status to test engineering leadership and site management detailing issues, risks, mitigations, and results
Optimizes solutions from a multi-systems point of view by taking into account the effect of any change on other parts of the systems and supporting functions
Deploys large scale automation test in coordination with offshore teams
Participate in cross-functional and global team discussions
Work collaboratively within a team framework to accomplish design goals set by team and project management
Work on special projects as they arise
Knowledge, Skills & Qualifications

Experience (4+ years) in using scripting languages (Ruby preferred) in automated testing solutions
Hands on experience using continuous integration tools, code review tools, & configuration management
Familiarity with best practices in Verification/Validation in a highly regulated environment
Demonstrated ability to manage small teams in planning and organizing formal test activities
Excellent documentation and communication skills
Strong issue analysis and debugging skills

Education and Experience

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline from an accredited college or university and 4+ years of experience
An equivalent combination of education and relevant experience can substitute

Notes from Hiring Manager:

System level testing where multiple components are interacting with the EMR.
Will be looking at use cases, documenting them, and then creating systems tests based on the data
Setting up a new test environment in the lab. Would run it like a hospital
Use cases, passes and fails
Set up a real life environment using MEDNET, pump, and interfaces
Will leverage the automation and code to create automation
UML modeling to document use cases and scenarios they want to drive in test
Use Ruby and Python and could have shell script
How does someone configure and maintain the system as well.
Can we extend and build tools and develop automation
 
Job Number: 617
Job Location: San Diego, CA
Rate: 67.00
Per Diem: Possible
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle Verification Engineer (WLAN/FDA)

Description:
Principal Engineer, Verification Lead

Primary Location: US-CA-San Diego Schedule: Full-time

Travel: Yes, 10 % of the Time Duration : 12 mos Contract-To-Hire

The Principal Engineer will lead a team of verification engineers in planning, developing, executing, and documenting software and hardware verification of the Communication Engine (CE).

The CE supports the wireless communication technologies (WLAN 802.11) which are integrated into the general infusion pump.

You will drive test strategy across distributed teams in a highly regulated healthcare environment.

You will also strive to enable automated test solutions that will support 24/7 continuous integration testing.

Essential Duties & Responsibilities

Plan and organize testing activities around project needs and timelines
Provide technical leadership in developing test automation for the communications engine of a general infusion pump
Develop test strategies using industry best practices to effectively test the software and hardware of the communications engine
Act as subject matter expert in reporting status to V&V and site management detailing issues, risks, mitigations, and results
Work on special projects as they arise

MUST-HAVE Knowledge, Skills & Qualifications

Knowledge of configuring, analyzing, and testing wireless connectivity software (802.11 a/b/g/n)
Experience (4+ years) in using scripting languages (Ruby preferred)in automated testing solutions
Demonstrated ability to manage small teams in planning and organizing formal test activities
Excellent documentation and communication skills
Familiarity with best practices in Verification/Validation in a highly regulated environment
Android experience preferred
Educational Background

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline from an accredited college or university and 6+ years of experience
An equivalent combination of education and relevant experience can substitute
Notes Taken Relevant to This Position :

Ultimate Responsibility:

Driving the test strategy, the coverage & performance of the network and ability to consider all facilities & human factors.
Will be working with teams both domestically & internationally
Will be working in the lab to test on the insulin pumps directly.
The hiring manager sees the definition of « A Principle Engineer » as a roadmap-setter of why we test it, how we test it, & what needs to be tested
MUST HAVE Wi-Fi background in testing on an Enterprise Wi-Fi network.
Must HAVE a systems perspective on how the device is to be used in the field (think of handheld devices that travel around the network and must keep perfect performance).
Thoughts to consider : Thinking about performance and response, does it work testing it over and over. Stability and stress testing. 24x7 working
Ideally needs to know how a Wi-Fi system runs in an Enterprise
Need to have Security Background as our team currently lacks this expertise.

What exactly will you be testing?

Use cases for CE.
Reliability, connection for uptime.
Roams from access point to access point to make sure that it is able to be connected well.
Running Andriod and using a Qualcomm implementation chipset.
Authentication protocols
 
Job Number: 615
Job Location: San Diego, CA
Rate: 67.00
Per Diem: possible
Overtime: possible
Duration: CTH
Start Date: asap
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Tech

Description:
Our client is looking for a Test Technician to join their team in Manassas, Virginia! The ideal candidate will have a 2 year technical degree in Electronics or Computer Systems and strong knowledge of computer software/systems. Sound like you? Apply today!

The ideal candidate for this position will perform the following tasks:
* Performs subassembly and unit test activities for ARCI submarine sonar system program.
* Test activities include the following: trouble shooting test failures and field return assets, performing factory acceptance tests with customer witness, completing test data sheets, compiling as built lists, generating reject notices for defective hardware, and documenting test software issues.
* Subassembly testing includes the following types of hardware: LINUX servers, VME based circuit cards, and CISCO switches.

Mandatory Qualifications and Experience:
* Must be able to obtain a secret clearance.
* Must have a 2 year technical degree in electronics or computer systems

The ideal candidate for this position will possess the following skills and characteristics:
* Knowledge of fiber optics, Windows and LINUX based operating systems is required.
* Knowledge of the following types of test equipment is required: function generator, oscilloscopes, multi-meters, and fiber optics meters. must have working knowledge of power circuitry
* Knowledge of ARCI sonar system, fiber optics, Windows Operating Systems, LINUX Operating Systems, Microsoft Office Tools
* Team oriented
* Good written/verbal communication
* Able to problem-solve

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127979
Job Location: Manassas, VA
Start Date: 07/02/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Leader – Infotainment System

Description:
Job Details:
We are looking for a Project Leader responsible for the requirements capturing of applications aimed at Automotive Domain. Your primary focus will be identification, evaluation and verification of software requirements for Automotive Infotainment Systems. This role will have a privileged contact with Business stakeholders in leading the Technical Business Requirements capture phases. It will also support the technical teams (internal and external) to explain and clarify business and system requirements. You will be working along-side OEM managing offshore team of engineers and developers. Therefore, commitment to collaborative problem solving, sophisticated design, and creating quality products is essential. Automotive infotainment experience is preferred.

Skills/ Requirements
* Proven successful experiences in leading automotive production programs.
* Strong knowledge in Automotive IVI system working (Hardware & Software) and external dependencies at a higher level.
* Familiarity in developing IVI applications like Media, Camera, Bluetooth and Voice Recognition
* 5+ years of programming experience in C++ and other UI technologies in Linux based envioronment
* 3+ years of experience in developing HMI / Application software for embedded products
* Ability to speak, read and write in Japanese and English languages
* Strong knowledge in UI design guidelines and best practices
* Knowledge in UML
* Working knowledge of software development processes
* Hands-on experience in Business Process Modelling and requirement prototyping.
* Practical end to end experience in system engineering life cycle and process.
* This position is based out of US

Interpersonal skills
* Communicates fluently and convincingly, both in meetings and discussions as well as through major reports and presentations using appropriate tools and techniques.
* Able to effectively communicate with technical and non-technical stakeholders.
* Provides leadership in a wide variety of technical areas and situations.
* Displays adaptability and flexibility to deal with the non-routine or unexpected situations.
* Able to work with limited supervision
* Excellent attention to detail
* Have a flexible approach to work, can do attitude and a team player

Key Responsibilities
The Project Leader will be responsible for:
* Interface with Global and Regional Business stakeholders to translate business needs into Technical Business Requirements
* Translation of Business Requirement into functional and non-functional System and sub-systems Requirements
* Communicate captured Business and System Requirements to Local and Global Stakeholders
* Prepare requirement specification to illustrate business requirements to internal and external stakeholders
* Participates in peer reviews to validate the requirements as well as reviews of the system design and test cases to confirm the system adheres to documented requirements.
* Support the Test Team by providing a clear understanding of System Requirements during the definition of Tests Scenarios.
* Identify the test scenarios/environments to cover up the system requirements verification.
* Manage requirements configuration
* Maintain Requirements Traceability Matrix
* Solution involved various IS Systems (multiple vendors, and multiple internal systems)

Task
* Lead the Business Requirements elicitation and translation into Technical System and sub-system Requirements.
* Document Technical Business and System Requirements, using appropriate perspectives.
* Lead Business requirement elicitation meetings with business stakeholders and suppliers.
* Model/ prototype technical business requirements as and when needed.
* Define user stories (use cases) from captured business needs.
* Give support to Test Team during the test planning and test scenario definition.
* Ensure completeness of requirements implementation as part of software testing.
 
Job Number: 11001
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Subrajeet Singh
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QUALITY ENGINEER & TEST SUPERVISOR

Description:
JSG is looking for a Quality Engineer & Test Supervisor for a direct hire opportunity in Los Angeles, CA!

SUMMARY:

The Quality Engineer & Test Supervisor is responsible for verifying that Resistance Welding and other equipment designed and assembled by Company meets the requirements defined in our drawings, procedures and checklists.

Supervision of the technicians completing the calibration and final test of this equipment is a key responsibility, as well as a key source of data for determining the compliance and reliability of that equipment. This engineer will work closely with the production managers and operators to determine the root cause and resolution of quality issues encountered in our plant.
They will also work with the production planning and customer service groups to assure that equipment will be calibrated and tested in time to support the commitments given to our customers.

RESPONSIBILITIES:

Collecting and analyzing data on non-conforming products, determining root cause of non-conformances, and working with employees in the manufacturing, engineering and purchasing groups to resolve the root causes identified.

Working with the engineering group to maintain and improve the calibration and final inspection procedures and checklists for our products.
Determining the test timing required to meet product shipment commitments and working with planning to assure that equipment is assembled and delivered to the test group to allow sufficient test times prior to an on-time shipment.
Supervising the technicians doing the calibration and final test.
Collaborating with colleagues in the QSS group to share resources as required to accomplish the broader mission of the group.
Training new and veteran employees as required.
Working with the R&D and engineering groups to implement more automated testing and calibration.
Providing technical information as required to the test technicians.
Troubleshooting and providing technical analysis of defects in company products.

Preparing and presenting reports and information as required including quality metrics and reliability statistics.
Other projects and tasks as requested by supervisor and management.

QUALIFICATIONS:
Must have at least 10 years of experience as a Quality Engineer in the Electro-mechanical equipment manufacturing industry. Experience supervising people is required.
Strong knowledge of electronics and PCs is required. Experience with lasers is a plus.
Demonstrated success in teams developing advanced products with electronic, mechanical and software components is a strong plus.
 
Job Number: 366471
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QUALITY ENGINEER & TEST SUPERVISOR

Description:
JSG is looking for a Quality Engineer & Test Supervisor for a direct hire opportunity in Los Angeles, CA!

SUMMARY:

The Quality Engineer & Test Supervisor is responsible for verifying that Resistance Welding and other equipment designed and assembled by Company meets the requirements defined in our drawings, procedures and checklists.

Supervision of the technicians completing the calibration and final test of this equipment is a key responsibility, as well as a key source of data for determining the compliance and reliability of that equipment. This engineer will work closely with the production managers and operators to determine the root cause and resolution of quality issues encountered in our plant.
They will also work with the production planning and customer service groups to assure that equipment will be calibrated and tested in time to support the commitments given to our customers.


RESPONSIBILITIES:
The Quality Engineer and Test Supervisor will be responsible for:

Collecting and analyzing data on non-conforming products, determining root cause of non-conformances, and working with employees in the manufacturing, engineering and purchasing groups to resolve the root causes identified.
Working with the engineering group to maintain and improve the calibration and final inspection procedures and checklists for our products.
Determining the test timing required to meet product shipment commitments and working with planning to assure that equipment is assembled and delivered to the test group to allow sufficient test times prior to an on-time shipment.
Supervising the technicians doing the calibration and final test.
Collaborating with colleagues in the QSS group to share resources as required to accomplish the broader mission of the group.
Training new and veteran employees as required.
Working with the R&D and engineering groups to implement more automated testing and calibration.
Providing technical information as required to the test technicians.
Troubleshooting and providing technical analysis of defects in company products.
Preparing and presenting reports and information as required including quality metrics and reliability statistics.
Other projects and tasks as requested by supervisor and management.

QUALIFICATIONS:
Must have at least 10 years of experience as a Quality Engineer in the Electro-mechanical equipment manufacturing industry. Experience supervising people is required. Strong knowledge of electronics and PCs is required. Experience with lasers is a plus. Demonstrated success in teams developing advanced products with electronic, mechanical and software components is a strong plus.
 
Job Number: 366471
Job Location: LOS ANGELES, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Design Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • Our expertise in flight deck avionics, cabin electronics, mission communications, information management, and simulation and training is strengthened by our global service and support network that spans 27 countries.

  • Working together, our global team of 20,000 employees shares a vision to create the most trusted source of communication and aviation electronics solutions, applying both insight and foresight to help our customers succeed. We are currently seeking qualified candidates for a Senior JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 5 years of hands on coding in Java using industry standard object oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Familiarity with virtual machine environments and their usage in complex system architectures

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Experience with setup/configuration of virtual machine environments (such as VmWare or equivalents)

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents)

  • Experience with Ethernet-based interfaces/protocols (IPv6 and SIP), serial interfaces, etc.

  • Understanding of Network Management fundamentals

  • Experience using SNMPv3 to monitor/control equipment

  • Working knowledge of scripting languages such as Perl, bash, etc.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13998
Job Location: Cedar Rapids, IA
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RTL & FPGA Design Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Role description & Responsibilities:



  • RTL / FPGA and HW Design Sr. Engineer for tactical missile system development and production programs


 


Key responsibilities include:



  • The desired candidate will be experienced (5 to 10 years) in RTL coding using VHDL and is proficient with hardware development using state of the art both Xilinx and Altera FPGA development toolsets.

  • Experience with high speed communication ports is a plus.

  • Familiarity with design security features in Xilinx and Altera FPGA are an added plus as are any experience in anti-tamper and cybersecurity implementations.

  • The candidate will also be experienced with the Mentor Graphics EDA toolset for design and simulation of circuits and be familiar with state-of-the-art programmable logic and electronic devices including high speed communication, embedded processors, and DSPs.

  • Experience with the FPGA and HW design process from concept to test and delivery is also required.

  • Hardware test and integration experience in a laboratory environment will include practical usage of a variety of test equipment including Oscilloscopes, Logic Analyzers, and DMMs. Strong knowledge of programming languages including C/C++, as well as Microsoft Office is desired.


 


Experience and Skill Requirements:



  • Minimum 5 - 10 years of experience in RTL/FPGA and HW product design and development.

  • Direct Digital conversion experience / signal processing hardware experience / Data link experience is a plus.

  • Experience desired in manufacturing support, characterization, test.

  • Ability to use and collect test data using Digital Storage Oscilloscopes, Digital Multimeters, Logic Analyzers, Software Based Debugging tools, In-Circuit Emulators, RF Network Analyzers, Spectrum Analyzers, and signal generators required. Interpretation of RF Test data and radiation patterns desired

  • Familiarity with Mentor PCB Design suite (DxDesigner, Layout, Simulation), Microsoft Office (Word, Excel, Power Point, Outlook, Visio), and CAD tools.

  • Familiarity with Printed Wire Board and Circuit Card Assembly processes (schematic capture, layout, fabrication, assembly) from concept thru design and production and sustaining through end-of-life.

  • BS in Electrical Engineering, MS preferred.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: O8243741
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic/Control Engineers (PLC) - Many Needed

Description:
**Must have a B.S. Degree
Experience leading control system design projects for aerospace and/or automotive industries.
Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.

**Must be able to start within 2 weeks from acceptance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-WA-PLC
Job Location: Everett, WA
Rate: $75.00-$85.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SUB-CONTRACTS ADMINISTRATOR

Description:
Sub-Contracts Administrator Needed in Shelton, CT for 15+ months contract!

Description:

The Subcontracts Administrator for Major Subcontracts in the Overhaul & Repair (O&R) Supply Management group is responsible for the management of $5M - $10M of annual spend with Company suppliers for repairs of major aircraft components and systems. These subcontracts are in support of multiple US Government and International Military program aircraft platforms. We seek an experienced supply chain candidate to join our team. The successful candidate will be responsible for managing supplier relationships, negotiating and managing major subcontracts, on-boarding and qualifying new suppliers, and supporting repair services from our supply base. Specific roles and responsibilities include, but are not limited to:

Management of 3rd Party/OEM repairs to execute government contracts for military aircraft. This includes PO placement for inducting repairs, obtaining supplier quotes, negotiating and funding repairs.

Warranty PO management - Similar to repairs except that warranty claims require a quick turnaround time and supplier may have to provide data for any warranty denials.
Supplier relationship management and driving improvement efforts across O&R.
Management of the overall procurement cycle, including any necessary coordination among programs and various functional support groups, purchase order placement and administration in support of sub-contracts.

Management of critical, time-sensitive and complex issues including; proposal evaluations, contract documentation, modifications for contract changes. Will assist in the development of subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services.

Management of supplier performance metrics, including: Supplier On-Time Delivery, Repair Turnaround Time, Delivery to Contract, Purchase Price Variance, Purchase Requisition placement, Cost of Poor Quality, etc.
Interact in an integrated team environment by coordinating with Programs, Engineering, Legal, USG Customer, Finance, and Marketing.

Lead key supplier negotiations of cost, terms and conditions, development Statements of Work, and long-term agreements. Control costs, manage cost avoidance and perform price analysis as required.
Manage the import and export of technical data, hardware, software, and qualification artifacts in full compliance with export license regulations.
Develop and implement RCCA plans for significant supplier issues and low performing suppliers
 
Job Number: 365898
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Engineer

Description:
Position objectives

Embedded Software development
Design and implement a new medical infusion pump product
Design and implement prototypes
Decide on hardware and software architecture issues
Documentation

Essential functions

C++ Software development – library and SDK level
Custom, specific user interface design and implementation
Documentation
Architecture level design

Contacts & Supervisory responsibilities

Together with your team colleagues, you are working closely with the project manager (PM) which is providing you support for the daily technical jobs, and with the delivery director (DD) which is empowering your skills and expertise by providing the needed knowledge, information and resources.

You will take part in the development of a new product.

You will work directly with key stakeholders and help decide on software architecture and hardware integration.

Qualifications

College graduated in Computer Science, Telecommunications or equivalent.
Minimum 10 yrs of software development experience, 5 years of C++.
Required key skills

Embedded C
Embedded and standard C++, design patterns
Custom user interface classes design
Realtime systems, event driven systems
Great attention to quality
Excellent written and verbal communication abilities
Follow process in a highly regulated industry

Great to have

Linux kernel space development experience
Experience and/or knowledge of system integration
Previous automotive or medical products development experience
NXP hardware such as i.MX series
Graphics programming (OpenGL but also direct framebuffer access)
C++ standard library inner workings, containers, memory pools
 
Job Number: 508
Job Location: San Diego, CA
Rate: 75.00
Per Diem: YES
Overtime: YES
Duration: 1-year
Start Date: August 15
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Hardware Engineer (FPGA/PCB)

Description:
Working together with the Director of Hardware Engineering you will be required to interpret an existing complex system and troubleshoot root-cause system-level issues as implemented system functions and interfaces evolve.

This problem-solving candidate will have 8-10 years’ experience with electronic hardware to ramp quickly.

Required Skills & Experience:

Must have Digital & Analog (Mixed Signal) Experience
FPGA experience
FPGA Development and Test Methodologies
Read/Write Verilog HDL
PCB Design and Analysis experience
Design and Analysis using Cadence Allegro PCB Designer
Schematic Capture using OrCAD Capture
Circuit Analysis using OrCAD PSpice Designer
Product-level design experience from a systems perspective
Full life cycle from concept to delivery
High level of experience with system level requirements definition
Architectural understanding
Verification and Validation as well bench/lab testing
Knowledge how to read and write Verilog code
Experience in scripting with Python and experience with Perl a plus
Make files and batch files
Other Specific tools:
Aldec: Riviera Pro Advance Verification Platform;
Xilinx: Vivado Design Suite
Lattice: Diamond Software Tool for FPGA Design
 
Job Number: 612
Job Location: Mesa, AZ
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Internal Quality Auditor - Slidell, LA

Description:
STS AeroStaff Services is now offering Senior Internal Quality Auditor jobs in Slidell, Louisiana. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Slidell, Louisiana; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Associate Manufacturing Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.]


Job Summary:

A Senior ISO Quality Auditor will work with the audit team to also schedule and conduct Quality internal process audits, Quality system audits, follow-up audits and other Quality related audits to ensure audit results are compliant and resulting actions are implemented and effective while providing guidance to auditors. Represent Quality and support the team at audit and corrective action meetings and discussions. Generate and assist in the issue of corrective action and risk mitigation requests and overseeing audit team audit process checklist content and acceptable corrective action to prevent recurrence.


Essential Duties & Responsibilities:

• Revise, refine, update and recommend changes to policies, procedures, artifacts and local support materials

• Present audit summaries, lessons learned and recommend actions for continuous improvement

• Responsible for the day to day actions of the audit team

• Oversee and conduct various internal Quality audits to ensure adherence to M&LS process requirements including audits and plans

• Direct auditor conduct and scope as directed by the Manager

• Ensure that ISO 9001 requirements incorporated into the Quality Management System are audited for compliance

• Generate and oversee team audit reports, metrics and coordinate results within the organization

• Collect and summarize audit data for metrics and reporting.

• Assist team and issue corrective action and risk mitigation requests

• Review corrective action submittals for acceptance and compliance

• Perform and monitor team follow-up audits for correction effectiveness

• Develop and revise audit checklists

• Analyze and maintain trending data and submit reports, as required

• Performs other duties as assigned by management


Qualifications:

• Bachelor’s degree in an Engineering, technical or a business field or equivalent or 10 years experience and training in a Quality audit and corrective action capacity

• Five plus years of auditing experience with lead auditor exposure or equivalent experience.

• Experience in planning in a process controlled environment

• Possess strong problem solving abilities

• Conducts oneself as a Quality SME in the areas of auditing, corrective action and ISO 9001 requirement interpretation

• Interpret 5-Why and Root cause analysis results and assist team for acceptance

• ISO 9001:2015 Lead Auditor certification strongly desired

• Work with internal audit team as the lead and can represent the team when and as needed

• ISO Quality system auditing experience or related experience/training

• Exposure to Risk based thinking and mitigation techniques is a plus

• Excellent oral and written communication skills

• Working knowledge of MS Office i.e., Word, Excel, Project, Power Point

• Experience with mainframe computer software such as Share Point, Cribmaster or related as a POC in Quality applications

• Understand and influence ISO 9001 requirements and compliance

• Point of Contact for ISO/Quality related internal third party audits

• Knowledge of process realization, implementation and compliance related to ISO standard requirements

• Ability to communicate well orally at all organizational levels

• Ability to represent Quality as a leading force and knowledge base

• Ability to interact effectively across all levels of the organization.


Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation Recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 42682
Job Location: Slidell, LA
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior PCB Designer

Description:
Description:
Plans, coordinates and performs designs for complex components and assemblies using the preferred 3-Dimensional (3D) Computer Aided Design (CAD) tool and protocols.
Uses technical judgment. May work with junior personnel to complete tasks.

Duties:
Plans, coordinates and performs design work for complex 3D engineering models and components. Exhibits detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T) Standards and can apply it to many varied situations. Performs as expert user of 3D Computer Aided Design (CAD) system with considerable experience in Top Down design work for complex 3D engineering models and components. May provide document maintenance and have responsibility for placement and routing of electronic circuits. May create Printed Circuit Board (PCB) fabrication drawings, plan PCB projects and create electronic schematic diagrams. Provides modeling leadership and counsel to other employees.

Specific Position Requirements:
This position is exclusively a Printed Circuit Board Designer position.

Required Education: Minimum of two-year technical degree or equivalent experience

Required Experience: Minimum of 5 years commercial PCB Design.

Required skills and abilities:
- Must have intensive knowledge of PCB design.
- Must have diversified knowledge of the design of testing, manufacturing, quality control, and marketing requirements.
- Must be able to make decisions independently on PCB design problems and methods.
- Must use advanced techniques and the modification and extension of theories, precepts, and practices of own field and related sciences and disciplines.
- Must be able to peer check others work and mentor another PCB Designer.
- Must have experience with Mentor Expedition software.

Essential job functions:
- Reviews documentation necessary for PCB development generated by other engineering groups and verifies this documentation is sufficient for PCB design. Generates, coordinates, and ensures completion of support documents as necessary. Generates and maintains PCB specifications.
- Train engineers in schematic capture.
- Train PCB designers in Mentor Graphics Expedition software.
- Creation and maintenance of CAD library.
- Working with other engineering personnel, establishes design parameters and ensures electronic designs comply with Design Validation specifications and product specifications. - - Works with Manufacturing Engineering and outside vendors to identify and rectify fabrication, component, or assembly problems.
- Works with Manufacturing Engineering, Sales and Marketing, and Quality Assurance to optimize designs for cost, quality, and manufacturability.
- Designs Printed Circuit board layouts based on engineering requirements and industry related experience

Preferred Tool Experience:
- Mentor Graphics Design Capture, version 7.9.5
- Mentor Graphics DX Designer
- Mentor Graphics Expedition
 
Job Number: 18-09462
Job Location: Fargo, ND
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 13 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Pratap Singh
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer

Description:
Assigned To Gina

Technical tasks may include signal processing/electronic protection/search/track/discrimination algorithm development, performance assessment trade studies, and analysis of sensor signal and data processing subsystems. Assignments focus on developing competency and contribution to program requirements definition, sub-system integration and test, and algorithm design.

Systems Engineers will use MATLAB regularly to conduct data analyses, and are expected to document and present technical results using standard Microsoft Office tools. The engineer should be comfortable working independently and in a team environment. Engineer will develop the technical acumen in the following Radar/Sensing areas:

Algorithm Development

Tracking and Discrimination *Statistical and Numerical Analysis of Radar Data Required Skills: *Minimum 3+ years overall engineering experience working with MATLAB tools for radar data analysis 

Experience in radar requirements development and/or design of system level software architecture
Experience with radar systems and signal processing techniques

Must have a DOD Secret Clearance

Desired Skills: *Familiarity with Simulink modeling tools, DOORS *Familiarity with Electronic Attack and Electronic Protection techniques

Proven ability to develop system and subsystem performance and test requirements, evaluate systems and subsystems interfaces, or design and integrate systems or subsystems using COTS/government supplied equipment

Proven experience with current air defense programs with specific experience in large, complex systems

Excellent communication, technical writing, oral presentation, and interpersonal skills

Strong analytic, technical and problem solving skills.

Minimum Bachelors Degree in Engineering, Science, or Mathematics area
 
Job Number: NH42876
Job Location: Tewksbury, MA
Duration: 6 Months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Engineer - RF Test and Measurement

Description:
Position Description
Experienced test engineer with expertise in the test and measurement of RF and/or Analog products. You will use your expertise to design, develop and integrate production test solutions needed for our RF/Microwave products. These test solutions include software and hardware for In-Process (IP), Environmental Stress Screening (ESS) and Acceptance Test Procedures (ATP). Responsibilities may include development of test solution requirements, architectural design, specifications, test procedures, testability analyses, design of RF or Analog interface test adapter (ITA) circuitry, software and documentation for Test Program Sets (TPS). Current secret clearance is required Current secret clearance is required.

Skills Required
•Proven experience designing and conducting performance testing of RF and/or Analog products
•Experienced in the design and development of test solutions using National Instruments (NI) LabWindows/CVI and/or TestStand •Experience with various test equipment (such as Power Supplies, Digital I/O, Oscilloscopes, Switch Matrices, DMMs, Counter/Timers and Thermal Controllers)
•Possess a strong understanding of the technical principles, theories, and concepts in the field of Test Engineering with a general knowledge of other related disciplines.

Skills Preferred
•Experienced in the design and development of test adapters (such as Virginia Panel based ITAs, Cabled Fixtures, PWB Fixtures)
•Experience updating existing production test solutions to address test reliability, test coverage or automation issues •Have a demonstrated closure-oriented and self-directed nature •Experience with the application of industry standards related to production level testing
•Experience with NI FlexRIO

Experience Required
Minimum of 10 years

Experience Preferred
12+ yrs

Education Required
BS in Electrical Engineering, Computer Engineering or equivalent

Education Preferred
MS in Electrical Engineering, Computer Engineering or equivalent

Additional Information
Provide clearance status Current secret clearance is required as there is very little unclassified work
 
Job Number: 42155
Job Location: Nashua, NH
Rate: $86.00
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation Software Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Managers Notes:



  • Team is significantly understaffed w/ new business continuing to flow in.

  • Needs strong Defense exp.

  • Matlab expertise and C++ exp req'd.

  • Master's degree pref.


 


Overview:



  • Develop sensor models and conversion of Matlab code into C++.


 


Requirements:



  • SECRET clearance required and ability to work on-site in Northridge.


 
Job Number: O8206144
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Application Developer/Analyst

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Description:



  • The Application Developer will work as part of a small team in the Information Technology Enterprise Applications Department.

  • This position will have a focus to deliver custom developed SharePoint Applications and Cognos Reports in support of the functional areas of the business.

  • When needed, this position requires the ability to assist business users in defining their requirements, researching, developing to industry software and database design principles and promoting new coding standards to peers.

  • This position will work closely with all end users, department supervisors, department managers, value stream managers, operations plant managers as well as the Business Systems organization. 

  • Must be a US citizen, and ability to immediately obtain an Interim Secret Clearance.

  • While the position does not require off hours on a regular basis, the Application Developer must have the capability to work off hours/weekends as required (e.g., taking a system down, performing an upgrade, etc.). 


 


Responsibilities 



  • Develop SharePoint Sites with custom applications and workflows 

  • Modify existing and create reports with the Cognos Report Authoring Tool 

  • High level of experience working in SQL Server Databases 

  • Write SQL code for troubleshooting and data analysis 

  • Work with IT management to provide schedules for software and report deliverables 

  • Works directly with users of data to resolve data conflicts, solution incidents and inappropriate usage 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8316239
Job Location: Northridge, CA
Rate: 50-60
Per Diem: Yes, Split
Overtime: Some
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Configuration Build Engineer - Secret Clearance

Description:
Job Description:

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs.



Duties will include:

Configuration Management: Managing views, VOBs, configuration specs and communicating these items to the team

Processing baseline update requests (BURs), creating builds, and updating labels in ClearCase or TFS

Maintaining the build script

Teaching people how to use the build script and the CM tool

Maintaining source lines of code (SLOC) metrics encompassing generating SLOC numbers for each build; and Document SLOC numbers in the metrics

Perform preliminary software smoke testing and high level functional testing

Writing the software version descriptions (SVD)



Preparing Installations: Creating and updating InstallShield project files for software and database installs; Debugging installs

Set up and assist SW engineers to download VMs, configuration specs, etc.

Other tasks include checking in CDs and DVDs into the lab and documenting processes and suggesting process improvements



Knowledge, Skills and Abilities:

The following are highly desired:

•Rational ClearCase

•Microsoft Team Foundation Server (TFS) 2015

•InstallShield 2015, InstallScript

•VMware

•Microsoft Office

•CMMI

•Scripting (VB Script, shell scripting, batch)



Education/Experience:

A Bachelor's degree from an accredited institution and two (2) years of work experience required. Allowable substitution: Applicants with at least six (6) years of relevant technical experience, without a degree, will be considered. Selected candidate must be detail oriented.

 
Job Number: 18-15115
Job Location: Camarillo, CA
Rate: 70.0USD/Hour
Per Diem: Split
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Configuration Build Engineer - Secret Clearance

Description:
Job Description:

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs.



Duties will include:

Configuration Management: Managing views, VOBs, configuration specs and communicating these items to the team

Processing baseline update requests (BURs), creating builds, and updating labels in ClearCase or TFS

Maintaining the build script

Teaching people how to use the build script and the CM tool

Maintaining source lines of code (SLOC) metrics encompassing generating SLOC numbers for each build; and Document SLOC numbers in the metrics

Perform preliminary software smoke testing and high level functional testing

Writing the software version descriptions (SVD)



Preparing Installations: Creating and updating InstallShield project files for software and database installs; Debugging installs

Set up and assist SW engineers to download VMs, configuration specs, etc.

Other tasks include checking in CDs and DVDs into the lab and documenting processes and suggesting process improvements



Knowledge, Skills and Abilities:

The following are highly desired:

•Rational ClearCase

•Microsoft Team Foundation Server (TFS) 2015

•InstallShield 2015, InstallScript

•VMware

•Microsoft Office

•CMMI

•Scripting (VB Script, shell scripting, batch)



Education/Experience:

A Bachelor's degree from an accredited institution and two (2) years of work experience required. Allowable substitution: Applicants with at least six (6) years of relevant technical experience, without a degree, will be considered. Selected candidate must be detail oriented.

 
Job Number: 18-15115
Job Location: Camarillo, CA
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Are you a seasoned Software Engineer? Do you want to work with a company that is leading in the aerospace industry? We have an opportunity in Colorado for a Software Engineer with solid experience. This fast-paced company offers a professional environment and room for advancement. Learn more about this opportunity, and why you should apply today!

The ideal candidate for this position will perform the following tasks:
* Be the primary interface with project leads and System Engineers for software architecture decisions.
* Own multiple software engineering lifecycle activities, to include requirements analysis, object oriented analysis & design (OOD), implementation, unit testing, integration testing, and delivery.
* Support development of complex internal and external system interfaces.

Mandatory Qualifications and Experience:
* Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree.
* TS/SCI cleared software engineers.
* Agile Software Development experience Java programming expertise & knowledge of Oracle or other relational databases
* Demonstrated object oriented programming experience Configuration management expertise including software release tools/processes and management of data Knowledge of the UNIX and/or widows programming environment & UNIX shell scripting
* Requirement to generate documentation to accompany developed software.
* Must have SCI clearance.

Desired Qualifications and Experience:
* Experience as a scrum master.
* Demonstrated object oriented programming experience in Java OS background to include Sun Solaris or Linux, and Windows Object Oriented Methodologies and UML Modeling Techniques.
* Knowledge of Oracle or other relational databases.
* Web development experience with Ruby on Rails or a Node.js framework.
* Knowledge of NoSQL Databases
* Knowledge of JavaScript and CSS; jQuery and Dojo library experience; Subversion or Git experience.
* Amazon Web Services experience.
* Ability to generate documentation to accompany developed software.

The ideal candidate for this position will possess the following skills and characteristics:
* Strong communication and interpersonal skills.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127873
Job Location: Littleton, CO
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCp
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Our client is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 75 year tradition of making history in advanced aircraft development. Do not miss your chance to be a part of history!

The ideal candidate for this position will perform the following tasks:
* Utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP).
* Responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software.
* Interfacing with various disciplines, including Systems Engineering and Integration & Test.

Mandatory Qualifications and Experience:
* Must be able to obtain an Active DoD Secret clearance or higher, investigated within the last 5 years
* Experience programming in C++
* Experience with real-time systems
* Hardware integration experience

Desired Qualifications and Experience:
* Experience with SW configuration control
* Message-level understanding of SW/HW interaction OFP and SIM integration
* Creating test tools or developing test environments
* Experience with test automation

The ideal candidate for this position will possess the following skills and characteristics:
* Highly motivated, organized engineer that is familiar with all aspects of mission systems development.
* Must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects.
* Must be able to support the full software development life cycle, including requirements and configuration management and work in a mature software process environment.
* Must have excellent oral and written communication skills

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127752
Job Location: Palmdale, CA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer who could aid in Technical documents for Software certification through Air worthiness certification process, such as 516C or even FAA. This could be a Test Engineer who could also aid in testing the software through the Lab as well. An Engineer who can help with System safety documents, test reports, System version description documents, configuration management, etc. The testing side would be aiding in code testing and verification from development through the lab prior to installation on the aircraft.


The Structures Company is an AA/EOE.
 
Job Number: 221
Job Location: CO
Rate: DOE
Per Diem: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Works under general direction.

This position requires an active U.S. Security Clearance to start, for which the U.S. Government requires U.S. Citizenship.

Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:

Category   Level   Name   Required   

Areas of Expertise - Intermediate - Web Based Applications - No

Software Skills - Advanced - Java - Yes

Software Skills - Intermediate - JavaScript - No

Software Skills - Intermediate - Oracle - No

Education Requirements: Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Reference Number: VEVBA
 
Job Number: 42395
Job Location: Saint Louis, MO
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: mark modesitt
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Avionics

Description:
Software Engineer that is experienced with Avionics. Should have strong radios/comms background in avionics. Must know how to handle messages over multiple radios. Must be familiar with Link 16, JVoice, SatCom, etc. Also, must have experience with C#. The main work is with integration of Aviation LRUs to include radios, EO/IR Sensor and mission displays.

The Structures Company is an AA/EOE.
 
Job Number: 219
Job Location: CO
Rate: DOE
Per Diem: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Electro-Mechanical Testing

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • This opening is for a Software Engineering position within the Test Engineering Center of Excellence in Irvine California.

  • This Software Engineer will be a part of an integrated, cross-functional team responsible for designing, developing, deploying and supporting Test Equipment for Electro Mechanical systems.

  • Applicants should have the ability to define, develop, validate, and work with a cross functional group of Test Engineers assigned to a development project.


 


Qualifications



  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

  • US Citizenship is required

  • Experience in real-time control systems is required

  • Experience with MS Windows based applications, C / C++ / C# and National Instruments Labview is required

  • Experience with safety critical software development methods (such as DO-178, DO-254) or Agile software development tools are desired.


 


PREFERRED



  • Experience with Electromechanical Systems is a plus

  • Experience with National Instruments development tools (CVI, Test Stand) is a plus

  • Experience with FPGAs programming including National Instruments cRIO technologies is a plus

  • Project management/project engineering experience preferred


 


The following talents and characteristics are very desirable: 



  • Knowledge in the areas of baseline control, earned value, risk management and product support 

  • Familiarity with various interface standards is highly recommended (ARINC 429, MIL-1553, RS-232/485. Ethernet, USB)

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14045
Job Location: Irvine, CA
Rate: 60-70
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Military Simulators (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • This software engineering position is involved with the Navy's E-2D Advanced Hawkeye team in the Simulation & Training Solutions (STS) business area located in Sterling, VA, just west of Washington, DC.

  • Develops, builds and modifies aircraft simulators and training systems for both military and commercial customers.

  • Devices range in complexity from a desktop trainer to a high fidelity weapon system and full-flight training systems including full visual, motion, and simulator interoperability (HLA/DIS).


 


Responsibilities:



  • Capture and perform requirements analysis

  • Further develop the architecture of software product designs

  • Develop detailed software specifications

  • Provide accurate time estimates for the software development effort

  • Design, develop, implement, test, and debug real time software applications and associated user interfaces


 


Required Qualifications:



  • BS degree in Computer Science or a STEM related degree.

  • 5 - 10 years of experience with full lifecycle software development, including:

  • Requirements analysis and deriving requirements

  • Preliminary and Detailed Design

  • Code and Unit Test: Object-Oriented Programming using C++ in Visual Studio

  • Source code control (Subversion, Git, ClearCase etc.)

  • Hardware/Software Integration

  • Test and Verification


 


Desired Qualifications:



  • Familiar with other programming languages (C, Ada)

  • OS Experience: Windows 7, Windows 10, Linux or VxWorks

  • Real-time programming

  • Previous aircraft simulation software development a plus

  • Experience with one or more of the following:

  • SAF, NGTS

  • Datalinks (Link 16/Link 11)

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13933
Job Location: Sterling, VA
Rate: 60-70
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Military Simulators (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • This software engineering position is with Rockwell Collins on the Navy's E-2D Advanced Hawkeye team in the Simulation & Training Solutions (STS) business area located in Sterling, VA, just west of Washington, DC.

  • STS develops, builds and modifies aircraft simulators and training systems for both military and commercial customers.

  • Devices range in complexity from a desktop trainer to a high fidelity weapon system and full-flight training systems including full visual, motion, and simulator interoperability (HLA/DIS).


 


Responsibilities:



  • Capture and perform requirements analysis

  • Further develop the architecture of software product designs

  • Develop detailed software specifications

  • Provide accurate time estimates for the software development effort

  • Design, develop, implement, test, and debug real time software applications and associated user interfaces


 


Required Qualifications:



  • BS degree in Computer Science or a STEM related degree.

  • 5 - 10 years of experience with full lifecycle software development, including:

  • Requirements analysis and deriving requirements

  • Preliminary and Detailed Design

  • Code and Unit Test: Object-Oriented Programming using C++ in Visual Studio

  • Source code control (Subversion, Git, ClearCase etc.)

  • Hardware/Software Integration

  • Test and Verification


 


HIGHLY PREFERRED:



  • Experience with one or more of the following:

  • Avionics and/or Satellite Comms

  • Datalinks (Link 16/Link 11)


 


Desired Qualifications:



  • Familiar with other programming languages (C, Ada)

  • OS Experience: Windows 7, Windows 10, Linux or VxWorks

  • Real-time programming

  • Previous aircraft simulation software development a plus

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14015
Job Location: Sterling, VA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with Active Secret Clearance / C++ Linux RI

Description:
161865/8276408

Job Title: Software Engineer - with active Secret Clearance
Job Category: Engineering

Work Site: Portsmouth RI
Job Number: 8276408
Max Pay Rate: 80.00
Start Date: ASAP
End Date: 6 Months
Position Type: Contract



Job Summary
Software development/integration task requiring knowledge of C++, and Linux. Knowledge of sonar, radar or weapons systems is a plus.
 
Job Number: MB-R8276408
Job Location: Portsmouth, RI
Rate: 80/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
Requirement# AERO-REQ-0834
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 06/25/2018
End Date 06/22/2019
Number of Resources 1
Security Clearance Secret



Title Software Engineer-N
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 75 year tradition of making history in advanced aircraft development. The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. Applicant must have excellent oral and written communication skills. This role requires an engineer with experience developing, integrating, testing, and deploying one or more embedded real-time applications; and experience integrating hardware and software.
Skill/Experience/Education
Mandatory:

Experience programming in C/C++; Experience writing real-time embedded software; Experience with real time operating systems, such as VxWorks 653 or Green Hills Integrity.


Interview Required Yes

Shift 1st Shift

OT Allowed No
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0834
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
Requirement# AERO-REQ-0825
Work Location Palmdale
Work Week9/80-A
Priority High
Needed Date 05/28/2018
End Date 05/31/2019
Number of Resources 1
Security Clearance Secret (Prime Contract:P-225 - 5 yr re-investigation required, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Title Software Engineer-N
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 75 year tradition of making history in advanced aircraft development. The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills.
Skill/Experience/Education
Mandatory:

Active DoD Secret clearance or higher, investigated within the last 5 years Experience programming in C++ Experience with real-time systems Hardware integration experience
Desired:

Experience with SW configuration control Message-level understanding of SW/HW interaction OFP and SIM integration Creating test tools or developing test environments Experience with test automation



Interview Required Yes

Shift 1st Shift

OT AllowedYes (OT Limitation: No)
TravelNo
Non-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0825
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
Requirement#AERO-REQ-0776
Work Location Palmdale, CA
Work Week 9/80-A

Needed Date03/27/2018
End Date03/15/2019
Number of Resources1
Security Clearance Secret


Title Software Engineer-N
Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Modeling and simulation efforts. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Good presentation skills. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance.
Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance with a background investigation within the last 5 years.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
Interview RequiredYes

OT AllowedYes (OT Limitation: No)
TravelNo
Non-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0776
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Analyst

Description:
Senior Analyst

Location: Farmington, CT
Pay Rate: DOE
Duration: 6+ Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**


Job Description

This company is seeking a Senior Analyst to join its International Trade Compliance (ITC) Corporate team. The candidate will work with ITC professionals from Company's Major Operating Units (MOUs) as well as other compliance professionals across Company to build and sustain a world-class compliance program.

Duties include:
Collect, prepare and analyze metrics and present in a manner that displays areas of opportunities, visually pleasing, with key take-aways to senior level management. Must be able to review, trend, and communicate the data and findings clearly.

Automate manual processes includes training, community and overall program metrics.

Prepare and deploy creative communications and regular newsletters to the ITC community.

Must be able to prepare and deliver executive level communications and briefings.

Create intuitive instructions, quick reference guides and standard work for the user community.

Create and maintain program tracker for Company led initiatives

Follow up on MOU deliverables, status and track to completion.

Development of a cadence to ensure the projects remain on schedule

Support Data Privacy self-assessment and inventory processes

Support monthly ITC Councils, Quarterly Operating Reviews and re-occurring meetings by capturing action items, meeting minutes, follow up and closure of those as well as a consolidated tracking mechanism.

Provide key support in ad-hoc projects specific to enhancing and building our ITC infrastructure.

Create and deliver training using Storyline Software.

Create Total Productive Maintenance (TPM) process for regular review and updates of our corporate policies and procedures.

Create process to document and capture policy and procedure exceptions. Be able to review and trend the data.

Preferred Qualifications:
Attention to detail a must
IT / data analytics background preferred to assist with metrics and automation
Ability to communicate both written and verbal in a clear and straightforward manner with excellent interpersonal skills. Also, demonstrated ability to handle multiple projects and tasks with clear prioritization and organization.
Shown strength in project management
Shown skill with project leadership, methods and tools
Demonstrated ability to lead and coordinate with cross-functional teams
Shown skill to communicate to a broad audience including Executives
Demonstrated ability to create training/reference documentation and deliver hands-on training
Demonstrated proficiency with MS Office products, high proficiency with PowerPoint, Excel, Project, Visio, and Word.
Articulate / Storyline Software experience helpful (10-30%).
Technical background within aerospace manufacturing /engineering preferred but not required.
Familiarity with U.S. export and import regulations preferred.

*Education / Certifications
Bachelor’s Degree in Business, Information Technology, Engineering, or Operations, or related field required with 2 to 4 years of experience.
MA/MS degree in Business Administration, Project Management or Information Technology or related field with 1-2 years of experience.
PMP Certification preferred
 
Job Number: 9083
Job Location: Farmington, CT
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer I - Eligible to Obtain Clearance TX

Description:
161984/8023842

Job Title: Sr Software Engineer I - Eligible to obtain Clearance
Job Category: Engineering

Work Site Address: McKinney TX
Job Number: 8023842
Max Pay Rate: 70-74HR

Start Date: ASAP

Job Description

Roles and Responsibilities:
• Participating in the full software lifecycle development (requirements analysis, design, implementation and unit testing, software integration and test, system level integration)
• Performing requirements analysis / definition to ensure system will meet all customer requirements.
• Integrating system parameters and software solutions into the real-time system and ensure the functionality of the requirement.
• Participating in code and other software artifacts reviews.
• Interacting with engineers from other disciplines, such as Systems and Electrical Engineering, to obtain pertinent information required to accomplish tasks.

Qualifications and Education Requirements
• Experience with C/C++ and Ada
• Experience using a Real-Time Operating Systems (RTOS), e.g., VxWorks, Linux, Green Hills (GH) Integrity or other.
• Familiarity with Agile lifecycle process including Scrum, Continuous Integration, and Test Driven Development Methodologies
• Applicants must have the ability to manage their own workload and have decision analysis skills.
• Must be able to manage multiple unrelated tasks in an organized manner.
• Ability to work occasional overtime to support critical program events.
• Must be able to communicate effectively in both written and oral form, and must be able to team well with others. 
• A current Secret clearance or the ability to obtain a Secret clearance is required.
Desired Skills
• Working knowledge of UNIX, Linux, Windows, VxWorks or other Real time operating systems
• Working with Open CL, Open GL, and CUDA on GPU platforms  
• Working experience with Power PC or similar processor, hardware interfaces, and space/airborne sensor systems. 
• Experience with design, code, integration, and test of large systems.

Minimum 4 years – Senior Software Engineer I
Minimum 6 years - Senior Software Engineer II

Additional Notes
Candidates may start unclassified
 
Job Number: MB-R8023842
Job Location: McKinney, TX
Rate: 70-74/hr max
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer II TX

Description:
162065
Job Title: Sr Software Engineer II - Clearance

Work Site Address: McKinney TX
Job Number: 8328795
Max Pay Rate: 80.00
Start Date: ASAP
End Date: 8-12 Months
Position Type: Contract



Job Summary
Participating in the full software lifecycle development (requirements analysis, design, implementation and unit testing, software integration and test, system level integration) • Performing requirements analysis / definition to ensure system will meet all customer requirements. • Integrating system parameters and software solutions into the real-time system and ensure the functionality of the requirement. • Participating in code and other software artifacts reviews. • Interacting with engineers from other disciplines, such as Systems and Electrical Engineering, to obtain pertinent information required to accomplish tasks.

Job Description

Qualifications and Education Requirements
Experience with C/C++ and Ada • Experience using a Real-Time Operating Systems (RTOS), e.g., VxWorks, Linux, Green Hills (GH) Integrity or other. • Familiarity with Agile lifecycle process including Scrum, Continuous Integration, and Test Driven Development Methodologies • Applicants must have the ability to manage their own workload and have decision analysis skills. • Must be able to manage multiple unrelated tasks in an organized manner. • Ability to work occasional overtime to support critical program events. • Must be able to communicate effectively in both written and oral form, and must be able to team well with others



Desired Skills • Working with Open CL, Open GL, and CUDA on GPU platforms   • Working experience with Power PC or similar processor, hardware interfaces, and space/airborne sensor systems.  • Experience with design, code, integration, and test of large systems
 
Job Number: MB-R8328795
Job Location: McKinney, TX
Rate: 80/hr DOE
Per Diem: no
Duration: 8-12 Months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer II - Clearance AZ

Description:
Job Title: Sr Software Engineer II - Clearance
Job Category: Engineering

Work Site Address: Tucson, AZ 85756
Job Number: 8255139

Start Date: ASAP End Date: 6-12 Months
Position Type: Contract


Job Summary
Applies technical expertise in the development of C++ software for embedded multi-processor systems. Develops complete software solutions, and influences the successful completion of supported programs and projects. Reviews software products for soundness of technical correctness and adequacy. Produces documentation related to the design and release of software artifacts. Understands and utilizes agile software development methods, automation, and continuous integration, particularly Scrum. Displays initiative and can work well alone or as a member of a team. Follows organizational / program / project processes and procedures. Interacts with senior software personnel through both written and verbal communication.
Job Description

Qualifications and Education Requirements
• Minimum of 5 years of experience developing embedded software in C++
• Experience and knowledge of Linux and Windows computing environments
• Hardware/software integrator for real time embedded software
• Experience with all phases of software development including requirements analysis, implementation, unit test, integration and maintenance
• Bachelor’s or Master’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field
• clearance

Preferred Skills
• Experience developing software using an Agile Software methodology with the Scrum Framework; working well in a dynamic team environment
• Proficiency utilizing software debugging tools to troubleshoot software implementation and ensure integrity of the software products
• Understanding of computer architecture and computer hardware optimization techniques
• Optimization/performance of algorithms in embedded code on hardware and simulation
• Working knowledge in the build automation tools Make and CMake on both Linux and Windows platforms
• Working knowledge and experience with configuration management tools, in particular Synergy
• Parallel programming principles and processes for technical computing environments
• Experience with unit test frameworks (Google Test), computer in the loop, hardware in the loop and closed loop simulation
• Excellent written and verbal communication skills
• Ability to work in an integration lab environment working on software/hardware
• Experience with Windriver Workbench and VxWorks 6.9.X
• Experience with TI Code Composer Studio v5.X
• Experience with Eclipse/CDT integrated development environment
 
Job Number: MB-R8255139S
Job Location: Tucson, AZ
Rate: open
Per Diem: no
Duration: 6-12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Test Engineer II with Active Secret Clearance CA

Description:
161753/8006618
Sr Test Engineer II - Clearance - El Segundo CA - 8006618

The Secure Information Systems organization requires a Systems Integration and Test (I&T) Engineer to expend the existing team of engineers due to increase in demand for our services. The successful candidate will be responsible for the technical leadership, of I&T activities for assigned program(s).

Job Description

Roles and Responsibilities
• Minimum 6 years of combined experience in the field of hardware or software development with emphasis on Integration/Testing of complex systems
• Minimum of 2 years of experience in technical leadership, cost, and schedule management associated with integration and testing activities on complex programs
• Write highly complex test procedures and protocols to assess product reliability and evaluate the ability of products to meet performance standards and specifications
• Previous experience with real time embedded systems development and debugging
• Previous experience with systems requirements verification and validation process
• Write test scripts such as Python and LabView on complex test stations
• Understand networking protocols such as TCP/IP, UDP, ARP, and ICMP
• Active DoD Secret Clearance required
• U.S. Citizenship is a requirement

Qualifications and Education Requirements
• Experience with CMMI Process
• Experience with EVMS Process

Required Education:
Bachelors in Computer Science, Computer Engineering, Electrical Engineering, or equivalent; advanced degree desirable
 
Job Number: MB-R8006618
Job Location: El Segundo, CA
Rate: 70/hr negotiable
Per Diem: no
Duration: 6 months
Start Date: CTH
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Analog and Digital Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Role description & Responsibilities:



  • Analog and Digital Sr. Engineer for tactical missile system development and production programs


 


Key responsibilities include:



  • Active DoD Secret Clearance

  • Experience with Missile hardware design, range safety, telemetry and flight terminations systems highly desired.

  • Develops, coordinates and conducts Analog, Power and Digital designs and evaluations of engineering design concepts. Which includes FPGAs with high speed interface.

  • Create Analog, Power and Digital designs simulation models using computer modeling tools.

  • Creates test plans and procedures for a variety of circuit card, environmental testing and Electrical System Integration.

  • Oversees or participates in hardware and integration in a laboratory environment testing.

  • Identifies opportunities for improvement based on review of failure data and supports development and implementation of component design improvements or updates.

  • Supports design reviews and test activities, as needed. Supports subcontractor evaluation, selection and coordination activities with respect to Analog, Power and Digital needs.


 


Experience and Skill Requirements:



  • Minimum 7-10 years of experience in Analog, Power and Digital product design and development.

  • Safety engineering knowledge desired.

  • Proven hands on design experience of board level and system level products.

  • Experience with Open System Architecture

  • Direct Digital conversion experience / signal processing hardware experience / Data link experience is a plus.

  • Experience desired in manufacturing support, characterization, test.

  • Ability to use and collect test data using Digital Storage Oscilloscopes, Digital Multimeters, Logic Analyzers, Software Based Debugging tools, In-Circuit Emulators, RF Network Analyzers, Spectrum Analyzers, and signal generators is a plus.

  • Ability to read and interpret military requirements, specifications, and Engineering drawings/schematics.

  • Familiarity with Mentor PCB Design suite (DxDesigner, Layout, Simulation, Hyper lynx), Microsoft Office (Word, Excel, Power Point, Outlook, Visio), and CAD tools and Matlab.

  • Familiarity with Printed Wire Board and Circuit Card Assembly processes (schematic capture, layout, fabrication, assembly) from concept thru design and production and sustaining through end-of-life.

  • BS in Electrical Engineering required, MS preferred.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8243198
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer reports to the Engineering Manager the Stress Engineer designs and tests processes for the manufacturing of systems and components. Performs complex assignments often requiring development of new or improved products, processes, and techniques; assesses feasibility and soundness of proposed engineering tests, products, equipment; and interprets principles, theories, and concepts of an engineering specialty.

JOB RESPONSIBILITIES

• Prepare structural substantiation documents which include stress analysis, static test plans, static test results, interface loads analysis and comparative analysis.
• Review all relevant technical specifications for the project.
• Generate finite element models or rigid body analysis using Nastran (or equivalent software).
• Consistently communicate with Program/Engineering Managers and Project Engineers to provide structural feedback and status their portion of the project.
• Experience in structural analysis of composites and metals.
• Experience in generating static test plans & reports.
• Experience in simplifying complex structural engineering problems with simple 2 D free-body-diagram and performing comparative analysis.
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion.
• Reviews project-related documentation to ensure its accuracy.
• Assists in determining project objectives to contribute to the development of a comprehensive project design.
• Performs other related duties as required.


• Bachelor's degree in Engineering or related field from a four-year college or university
• Three (3) years related experience and/or training; or equivalent combination of education and experience.
• Detailed hand calculations experience.
• Experience using Finite Element Analysis (FEA) methods.
• Must possess extensive knowledge of engineering principles, classical stress analysis techniques and analytical substantiation methods.
• NASTRAN, Patran, or FEMAP experience.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - Durability & Damage Tolerance CA

Description:
16974/161314

Title Stress Engineer - Durability & Damage Tolerance
Job Summary

We have an exciting opportunity for a Stress Engineer specializing in Durability and Damage Tolerance in our Airframe Integrity Group. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems. Assignments are normally outlined in terms of overall objectives and anticipated results. Work is reviewed at milestones or at completion for adequacy in meeting objectives. Documents findings, communicates results to engineering staff and makes technical presentations as required. May coordinate segments of a specific project and may have frequent inter- organization and customer contact on difficult technical issues. Provides direction to design or technical staff and may provide direction to less experienced professional staff.

DUTIES AND RESPONSIBILITIES:
•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Responsible for performing structural analysis of aircraft components, assemblies, and systems while working as an integrated team for design studies.
•Structural analysis includes strength, stability, residual strength, fatigue, damage tolerance and fracture analyses of detail designs using both computer modeling analysis methods and classical calculation methods
•Evaluate structural integrity of aircraft structures by way of classical hand and finite element methods.
•Generate documentation to report analysis and test results to support airworthiness certification.
•A working knowledge of FAA and Mil-Spec airworthiness requirements, along with experience with Matlab, Excel and Visual Basic will be advantageous.

Qualifications Essential Qualifications
Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelor’s degree, seven or more years of experience with a master’s degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

Additional Qualifications
• Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelor’s degree, seven or more years of experience with a master’s degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education
• Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
• Must be familiar with stress, dynamics, and vibration analysis of metal and composite structures.
• Experience with durability and damage tolerance of metallic structures using NASGRO /AFGROW is required
• Working knowledge with NASTRAN or ABAQUS software is required.
• Must have at least 2 years of working experience using Finite Element analysis tools like NX SimCenter, Hypermesh, FEMAP/NASTRAN, and ABAQUS.
• Knowledge of composite material behavior, laminate theory, and analysis is desired.
• Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
Max rate $70/hr
 
Job Number: JE-16974
Job Location: San Diego, CA
Rate: 70/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer CA

Description:
16211
Title Stress Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for a Stress Engineer in our Airframe Integrity Group at GA-ASI. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems. Assignments are normally outlined in terms of overall objectives and anticipated results. Work is reviewed at milestones or at completion for adequacy in meeting objectives. Documents findings, communicates results to engineering staff and makes technical presentations as required. May coordinate segments of a specific project and may have frequent inter- organization and customer contact on difficult technical issues. Provides direction to design or technical staff and may provide direction to less experienced professional staff.

DUTIES AND RESPONSIBILITIES:•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Responsible for performing structural analysis of aircraft components, assemblies, and systems while working as an integrated team for design studies.
•Structural analysis includes calculation of loads, stress analysis, fatigue analysis, and vibration analysis.
•Evaluate structural integrity of aircraft structures by way of classical hand and finite element methods.
•Generate documentation to report analysis and test results to support airworthiness certification.
•A working knowledge of FAA and Mil-Spec airworthiness requirements, along with experience with Matlab, Excel and Visual Basic will be advantageous.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Essential Qualifications:
• Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. on.
• Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
• Must be familiar with stress, dynamics, fracture, fatigue and damage tolerance analysis of metal and composite structures.
• Working knowledge with NASTRAN or ABAQUS software is required.
•Must have at least 2 years of working experience using Finite Element analysis tools like Hypermesh, Pro/Mechanica, FEMAP/NASTRAN, and ABAQUS.
• In addition knowledge of aeroelastic analysis and modal testing is desirable. Requires knowledge of composite material behavior, laminate theory, and analysis
• Able to work extended hours as required.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-16211
Job Location: San Diego, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structures Design Engineer will serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs. Looking for candidates who want to be part of a core design team as opposed to someone who is only interested in pumping designs.

Successful candidates will have experience creating designs from conception through completion.

7 Engineers needed

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
• Familiarity with structural analysis methods, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Working knowledge of composite aircraft construction including primary and secondary structure
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-028
Job Location: Greensboro, NC
Rate: Up to $60
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structure and Survivability Design Engineer

Description:
US CITIZENSHIP REQUIRED

A Structure and Survivability Design Engineer is needed to assist in the design and development of ground combat vehicle structures, armor and spall liner.

Specific work will include:

-Design of weld joints for steel and aluminum structures
-Develop engineering design concepts via CAD software
-Assist lead engineers on the design of structures, appendages, armor and spall liner for various military vehicle platforms
-Work with design services (drafting) to create detailed drawings
-Provide technical support to other engineering organizations
-Address manufacturing, procurement and field problem reports
-Present design concepts and program status to functional and program management

Required B.S. in Mechanical Engineering
 
Job Number: 42101
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: Split
Overtime: Pos
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Administrator - Level 3

Description:
Location: Lexington, KY
Rate: $37.50 - $45.00/HR
Duration: 3 month W2 contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Company is looking for three subcontract system administrators to augment the current staff with the expectation of converting them to Lockheed Martin employees after six months of excellent performance. Each candidate must have at least one of the following skill sets (along with the experience and credentials to match): Enterprise Storage Management (e.g. NetApp, 3PAR, etc), Microsoft Exchange, and / or Internet Information Services (IIS). Candidates must have a current Security + certificate and an interim security clearance to begin work. Duties may include setting up administrator and service accounts, maintaining system documentation, tuning system performance, and installing system wide software. Interacts with users and evaluates vendor products. Makes recommendations to purchase hardware and software, coordinates installation and provides backup recovery. Develops and monitors policies and standards for allocation related to the use of computing resources. PLEASE REVIEW SECUIRTY +


Skill/Experience/Education
Mandatory:
System / Server Administration
3 to 5 years of experience in one of three domains; Enterprise Storage, Internet Information Services, or Microsoft Exchange

Desired:
Network Monitoring / Troubleshooting, Data Storage, Exchange, Lync, VMWare, Certificate Services, Mobile Device Management, Reverse Proxy Services
 
Job Number: 8915
Job Location: Lexington, KY
Rate: $37.50 - $45.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 3 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
• BS in an Engineering discipline, MS preferred
• 5-15 years of experience
• Concentrate on mid-level career engineers
• Will review candidates with most skills and more experience
• Experience in system level development, requirements definition, analysis, and risk mitigation
• Complex systems: Either electro-optics (EO) or space
• Space payload experience a plus
• Experience with verification and validation of requirements
• Experience in developing and verifying interfaces between major subsystems
• Experience with Model-Based Systems Engineering
• Capable of using the following software tools: MATLAB, Mathcad, STK, and JIRA
• Excellent oral, written and presentation skills for interfacing with senior management, customers, and sub-contractors
• Existing TS/SCI (SSBI) security clearance or the ability to satisfy requirements for a TS/SCI (SSBI) desired
 
Job Number: 41-001
Job Location: Wilmington, MA
Rate: DOE but very competitve
Per Diem: Yes
Overtime: No
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Huntsville, AL
Pay Rate: $50/hr
Duration: 15 Month W2 Contract
Shift: First, 9/80, exempt OT
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Position Description
-THAAD Ground Systems Development (GSD)
-DOORS Database Admin reporting to the THAAD Grounds Systems Requirements Lead for development, maintenance, and publication of TFCC, Launcher, and/or Support Equipment requirement specifications.
-Position requires selected candidate to quickly become a proficient independent contributor with the Ground Systems Development DOORS database and apply systems engineering change control process to maintain control of the GSD requirements.
-Selected candidate will develop and maintain DXL scripts and Rational Publishing Engine scripts for producing documents and reports from the DOORS database.
-The candidate will utilize Clear Case and Clear Quest to implement change control of the DOORS database.

Skills Required
-Experience with DOORS
-Experience with DXL
-Experience with Rational Publishing Engine

Experience Required
-Experience with requirements development and change control processes
-Ability to define and document solutions to complex problems and to convey solutions to both senior management and to software implementation teams

Skills Preferred
-Experience with Missile Defense
-Experience in Requirements and Verification
-Experience with Clear Case/Clear Quest
-Experience documenting processes

Experience Preferred
-Experience with Missile Defense
-Experience in Requirements and Verification
-Experience with Clear Case/Clear Quest
-Experience documenting processes

Education Required
Bachelor's Degree
 
Job Number: 8780
Job Location: Huntsville, AL
Rate: 50
Per Diem: Split Possible
Overtime: Exempt
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Flight Management

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Description:



  • We are currently seeking qualified candidates for Systems Software Engineering positions on the Rotary Wing FMS in the Flight Management Applications department located in Cedar Rapids, IA.

  • This team is responsible for designing and testing flight management software (navigation, flight planning, guidance, hardware status and control) for rotary wing aircraft.

  • The primary tasks for this position include requirements and test procedure development.


 


Qualifications include: 



  • The Candidate must have FMS and Python experience

  • Experience with systems and software tools (DOORS, Python, ADA, Matlab)

  • Experience with development, verification and integration of Flight Management Systems

  • Experience interacting with domestic and international customers and peers

  • Time management skills - ability to work unsupervised, multi-task and coordinate work

  • Basics of risk management (identify, quantify, and mitigate risks)

  • Effective communication (written, verbal, interpersonal)

  • Scope management

  • Perform cost/benefit analysis

  • Familiarity with the AGILE development process


 


Top Requirements



  1. Previous experience with Flight management systems development, integration or verification

  2. Previous experience with python

  3. Previous experience using DOORS

  4. Track and report technical, cost and schedule issues for their assigned scope of work

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: R14072
Job Location: Cedar Rapids, IA
Rate: 50-60
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Military Communications (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Project:



  • The Mission Systems Organization provides integrated communications systems for E6-B, E-4, B2 missions. The system is subject to continuous change as networking and communication technologies evolve.


 


Job Summary



  • We are currently searching for a Senior Systems Engineer to join our team in Richardson, Texas.

  • Typical responsibilities may include leading the technical design and development of other systems engineers, working with the Engineering Project Manager to create and maintain estimates of schedule and budget, and participating as a member of bid team to provide input on effort estimates for proposals of small to medium complexity. 


 


This Senior System Engineer will support these system updates, enhancements, and expansions by:



  • Capture, analyze, decompose, model and create requirements for systems, product or sub-systems of moderate complexity.

  • Conduct verification/validation testing for products and subsystems of moderate complexity and contribute to system integration.

  • Contribute to the development of functional, interface and performance specifications for hardware and software implementation. Contribute to architecturally significant requirements and technical risk area identification.

  • Create and run verification and validation tests for products and sub- systems of moderate to high complexity.

  • Perform trade studies and make value engineering decisions. Defining system architecture and interfaces between internal and external systems. 


 


Required Experience:



  • Candidates must have a minimum of 5 years of system engineering experience performing system engineering in the following areas:

  • Architectural changes and customer-driven enhancements to complex systems.

  • Complex systems typically involved airborne, ground and other systems. 

  • Analyzing performance of complex systems. 

  • Eliciting and managing customer requirements.

  • Experience working in a highly integrated team environment with software, hardware, and mechanical engineers

  • Experience in requirements management tool(DOORS, etc) and SYSML language(EA, NoMagic, etc)


 


Basic Qualifications:



  • US Citizenship

  • Ability to obtain a DoD Security Clearance

  • Experience with all phases of the system development life cycle

  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline


 


Desired Experience:



  • MS in System Engineer


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: R13802
Job Location: Richardson, TX
Rate: 70-80
Per Diem: Yes, Split
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Sr.

Description:
Systems Engineer Sr (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Huntsville, AL
Pay Rate: $60/hr
Duration: 15 Month W2 Contract
Shift: First, 9/80, exempt OT
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Position Description
-THAAD Ground Systems Development (GSD) Systems Engineer reporting to the Team Lead for development of Concept of Operations, functional and algorithm design for engagement operations.
-Selected candidate will be responsible for algorithm prototyping within the suite of modeling and simulation tools; development of new analysis tools, conduct analysis for assessment of prototype design; generation of Algorithm Description Documentation of final design; support to software development teams for formal software development and test activities.
-Selected candidate will also support program planning, and program execution status activities, and proposal development for new efforts.

Skills Required
-Modeling/simulation experience
-C/C++ programming experience
-Matlab proficiency

Experience Required
-Past experience with missile defense algorithm development and analysis
-Strong written and verbal communication skills
-Ability to successfully interface with Company Senior Management, Customers, and members of U.S. Army Air Defense community at large

Skills Preferred
-Experience in Missile Defense Concepts and Interoperability
-Experience with Missile Defense - Engagement Operations/Force Operations Experience with Algorithm configuration management
-Experience in Requirements and Verification
-Experience with the DOORS Requirements Database

Education Required
Bachelor's Degree
 
Job Number: 8779
Job Location: Huntsville, AL
Rate: 60
Per Diem: Split Possible
Overtime: Exempt
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer with active secret FL

Description:
161515/8156880
Systems Engineer with active secret
St. Petersburg, FL
12 months

Seeking 3 Systems Engineers for Requirements Development, Data Analysis, SW/Systems Integration and Software Trouble
Investigations. The Systems Engineer will be involved with the following activities:
Create, develop and maintain Requirements
Support design and implement new tactical capabilities
Update/maintain/utilize various simulation tools to support data analysis
Support periodic customer briefings; creating technical presentations and reports necessary to support contract specified
Requirements.


Qualifications and Education Requirements
4-8 years of Science or Engineering work related experience
- B.S. Electrical Engineering; Computer Science; Math – Applied, Mechanical Engineering, Physics, or equivalent
- Understanding of System Engineering Product Development Cycle
- Understanding of Software Engineering Product Development Cycle
- Demonstrated experience with Sensor integration and Tracking
- Strong analytical, communication, and writing skills
- Existing DOD Secret Clearance or greater


Preferred Skills
M.S. Electrical Engineering; Computer Science; Math – Applied, Mechanical Engineering, Physics or equivalent - Self starter with the ability to independently pursue information and solve problems - Knowledge of surface and air radar architecture - Naval Combat System Experience &/or CEC - Experience with modeling and simulation of embedded software. - Experience with MATLAB/Simulink, and modeling/simulation tools.
 
Job Number: MB-R8156880
Job Location: St. Petersburg, FL
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineering Specialist

Description:
Do you have 10 years of engineering experience? Do you have knowledge and experience working with simulating systems in Matlab and Simulink? Apply to become a Systems Engineering Specialist with one of our top clients in the aerospace industry today!

The ideal candidate for this position will perform the following tasks:
* Responsible for engine and transmission system performance modeling, vehicle performance modeling, and component performance modeling.
* Responsible to allocate and derive requirements from vehicle, engine, and transmission system level down to the component level using a systems simulation model in Excel, Matlab, Simulink, or other software.
* Technical lead of cross-functional matrixed project team (ME, EE, Software, etc.) for engineering projects through the Systems Requirements Review to ensure engineering requirements are met.
* Mentor and trainer of other engineers for Systems Engineering related simulations and activities.
* Improve and document the L3 Systems Engineering Process with processes, document templates, or modeling standards.
* Author engineering technical reports for submission to the customer.
* Participate or lead new engine and transmission proposals.
* Provide input to product specifications and design verification test plans to ensure that they adequately captures all data to assess requirements compliance.

Mandatory Qualifications and Experience:
* Bachelor's degree in Systems Engineering, Mechanical Engineering, Electrical Engineering, Physics, or equivalent technical BS degree with 10-14 years engineering experience.
* At least 2 years experience working as a Systems Engineer (10 years engineering experience overall).
* Experience with simulating systems in Matlab and Simulink.
* Knowledge of transmission, engine, and vehicle performance and understanding of powerpack integration into vehicles.
* Engineering knowledge of mechanics; hydraulics; powertrain parts such as gears housings, and shafts; knowledge of performance parameters such as speed, RPM, torque, power and gear ratios.
* Ability to obtain a security clearance.
* Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment.

Desired Qualifications and Experience:
* Master’s degree in Systems Engineering.
* Experience with Rational Dynamic Object Oriented Requirements System (DOORS) software or equivalent.
* Expert product knowledge of transmissions, engines, and powerpack integration into tracked vehicles.
* An understanding of working with CAD models and programs in Pro E (Creo).
* Experience in developing products for the defense industry.

The ideal candidate for this position will possess the following skills and characteristics:
* Highly organized and able to multitask on many different projects at once.
* Proven ability to make technical decisions, complete project objectives within budget and schedule, and work with little supervision.
* Proven ability to work well with others in a cross-functional environment while working on multiple projects.
* Ability to utilize all Microsoft Office applications including Word, Excel, Powerpoint, and Project.
* Excellent written and verbal communication, and the ability to write and review technical reports.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127851
Job Location: Muskegon, MI
Start Date: 06/18/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration with active secret CA

Description:
Requirement#AERO-REQ-0819
Work LocationPalmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date06/05/2018
End Date03/05/2019
Number of Resources1
Security ClearanceSecret


Job Description

Type of Service:Engineering / Technical
TitleSystems Integration
Description
Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture. Must be a US Citizen. This position is located at a facility that requires special access and an active Secret clearance issued within the last 5 years.
Skill/Experience/Education
Mandatory:

--Experience with Systems Integration and Test --Experience with Systems Engineering Life Cycle --Experience with Sub-System Integration --Experience with Test Procedure Development -- Experience with C++, Python
Desired:

Avionics, Mission Planning and I&T experience / background, experience with requirements development and integration and test processes, strong laboratory skills, flight test experience 5-8 years experience Bachelor or Above Degree in a Technical Engineering Discipline



Interview RequiredYes

OT AllowedYes (OT Limitation: No)
TravelNo
Non-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 40.00 USD
5-8 YrsPay Rate: 45.00 USD
9+ YrsPay Rate: 50.00 USD
 
Job Number: JE-0819
Job Location: Palmdale, CA
Rate: 40-50/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tech Data Associate II

Description:
Tech Data Assoc II

Location: Long Beach, CA
Rate:DOE
Shift: 1st

FAA Regulated?: No

Unique Skills:
Document control/data management experience.

Education and Experience Requirements:
High School/GED. Associates degree preferred. High degree of proficiency with office software packages (Word, Excel, PowerPoint). Experience with project planning software preferred. Two (2) years working in an office administrative function supporting data management initiatives. Prior Aerospace experience preferred.

Position Purpose:
Under general supervision, generates basic reports and documents and supports the control and release of technical data. Primary responsibilities include, but not limited to, gathering, organizing, generating, processing and supporting data and information.

Principal Duties and Responsibilities:

Essential Functions: 1. Supports project leaders/management in the creation of data packages/reports and reviews technical data to ensure legibility, verifies accuracy and completeness to proper format and procedures. 2. Utilizing an understanding of technical data, makes recommendations to ensure documentation/reports are prepared in accordance with approved procedures. 3. Under direction, exercises creativity and initiative to remove system/process roadblocks to ensure completion of activities within established schedules. 4. Works with internal and external customers to identify, research and resolve data integrity issues. 5. Assists in the development of manuals and training materials for the function. 6. Assists in maintaining and controlling technical data to support internal/external customers and/or document/work packages. 7. Tracks and monitors job status through workflow processes.

Additional Functions: 1. When required, participates on work teams to achieve department goals and improve processes. 2. Maintains a current and up-to-date knowledge of technical developments within the given function/discipline. 3. Performs other duties as assigned.

Other Requirements: 3. Must be able to meet the physical requirements of the job, work is performed in an office environment mostly in a sitting position with infrequent lifting of 10-15 pounds 2. Strong verbal and written communication skills, including ability to present information in a group setting 1. Strong organization and analytical skills to be able to solve process/system problems under general direction
 
Job Number: 9361
Job Location: Long Beach, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer 3 with Ability to obtain Secret CA

Description:
1641
Technical Editor and Writer 3 (Job Number: 18004727)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Apr 23, 2018

Target End Date: Dec 28, 2018

Pay Rate: $44/hr

Work Schedule: 9/80

Duration of Assignment: 1 year or longer

Clearance: Ability to obtain Secret


As a level 3 Flight Manual Editor and Writer, be responsible to write, rewrite and/or edit documents such as operational procedure manuals, user manuals, programming manuals, operational specifications, performance appendices, and related technical publications to communicate clearly and effectively, operational specifications and instructions to aircrew audiences to include military personnel. This position will require the initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals. This position will also require the active participation in overseeing the preparation of illustrative materials, to include the selection of drawings, sketches, diagrams and charts. Furthermore, this position requires the responsibility to conduct detailed quality reviews and to work closely with customers and engineers for issue resolution.


Basic Qualifications:

6 Years with Bachelors, 4 Years with Masters, or equivalent experience. Previous Flight Manual authoring and development experience. Familiar with pilot and/or mission operator controls, displays, and general knowledge of aircraft systems. Previous experience developing Interactive Electronic Technical Manuals (IETMs). Strong attention to detail and personal organization. Be a pro-active team player who thinks ahead, plans and suggests solutions. Must be able to attain a Secret clearance.

Preferred Qualifications:

Previous Flight Manual authoring and development experience. Military and/or Pilot experience preferred in unmanned or manned aircraft. Familiar with pilot and sensor operator controls, displays, and general knowledge of all aircraft systems. Ability to support airworthiness military type certification. General understanding of S1000D, SGML or XML authoring software, common source database, and technical publications development processes. Ability to interpret engineering documentation including drawings, specifications, alert bulletins and other technical documents. Possess excellent oral and written communications skills. Must be able to perform work with little or minimal supervision. High literacy in structured authoring environment (bookplan structure, task numbering and DTDs/schema, elements, tagging and attributes). Experience producing electronic technical data.
 
Job Number: MB-1641
Job Location: San Diego, CA
Rate: 44/hr max
Per Diem: no
Duration: 1 year or longer
Start Date: 9/80
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer CA

Description:
162043/1660
Technical Editor and Writer 3 (Job Number: 18011203 & 18011325)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Jul 23, 2018

Target End Date: Jan 31, 2019

Pay Rate: $40/hr

Work Schedule: 9/80


Job Description:

- As a Technical Editor and Writer, you will be responsible to write, rewrite and/or edit technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications.

You will develop material that communicates clearly and effectively the technical specifications and instructions to a wide range of audiences to include military personnel.


Basic Qualifications:

- 6 Years with Bachelors; 4 Years with Masters.
- Previous IETM authoring and development experience.
- Possess knowledge of S1000D, SGML or XML authoring software, common source databases, technical publications development processes, and Quality Assurance (QA) methods.


Preferred Qualifications:

Possess a familiarity with aircraft systems and the USAF Technical Order guidelines.
 
Job Number: MB-1660
Job Location: San Diego, CA
Rate: 40/hr
Per Diem: no
Duration: 9-12 Months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer II

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Primary



  • Converts legacy documentation to content management system, specifically Solumina Manufacturing Execution System.


 


Secondary



  • Authors in clear and concise language to develop and prepare process control documentation used to fabricate components/subassemblies/assemblies.

  • Demonstrates excellent writing skills, accurate and concise communication skills.

  • Works to develop new/update existing documentation via interfacing with SME’s, engineering drawings, tracking and validating data from multiple sources.

  • Coordinates with cross-function teams to obtain all necessary input. Has ability to work both independently.


 


Requirements:



  • English or technical writing degree or experience required.

  • Experience with content management system.

  • Strong working knowledge of Microsoft Office software products

  • Strong analytical, written and oral communication abilities. Working knowledge in document preparation, editing, and grammar

  • Understanding of basic engineering principles as well as the ability to read, understand, and interpret engineering documentation such as engineering drawings, and schematic diagrams

  • Ability to work both independently and in cross-functional team environments


 


Preferred Skills:



  • Knowledge of authoring technical documentation in manufacturing execution systems software, preferably Solumina.


 


Manager Notes:



  • Should meet minimum req'ts outlined below.

  • Soft skills will be key (work ethic, quick learner, good fit for team.

  • Interview q's will include: Exp reading drawings?

  • Exp working w/ Eng and converting their instructions into docs?

  • Adept at learning new software?

  • Team joining is ~5 writers, ranging from mid-sr level exp. Will support team of ~30 Engineers.

  • Position open due to surge in workload

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8270816
Job Location: Elkton, MD
Rate: 30-40
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
This position requires extra expertise with avionics/electrical systems and troubleshooting.

Education and Experience Requirements:
-Bachelor's Degree or equivalent experience in the authoring of technical publications required.
-Four (4) years Technical Publications writing experience.
-Three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications experience required.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications.
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principle Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. Perform other duties as assigned.
 
Job Number: 8660
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Telecom Specialist Audio & Video

Description:
Telecom Specialist Audio & Video

Location: Savannah, GA
Pay Rate: $39.66/hr - $44.08/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Cisco CUCM, Voice routing experience, SIP

Education and Experience Requirements:
Bachelors degree or equivalent combination of education and experience to successfully perform the essential functions of the job. Degree in Computer Science, Management Information Systems, or technology related field highly preferred. Minimum of five (5) years of experience related to audio/video telecommunications systems, technologies and related equipment

Position Purpose:
Performs the evaluation, implementation and maintenance of existing and emerging audio/video telecommunications technologies.

Principal Duties and Responsibilities/Essential Functions:
1. Perform installations, maintenance, and upgrades of audio/video telecommunications systems and related peripheral equipment. 2. Assist in evaluating new tools and technologies for audio/video services. 3. Troubleshoot audio/video telecommunications hardware and software problems and answer any questions associated with these. 4. Assist with one or more of the analytical tasks associated with technical areas within the audio/video telecom function.

Additional Functions:
1. Performs other duties as assigned

Other Requirements:
1. Broad and in-depth knowledge of audio/video telecommunications systems, technologies and related equipment
2. Detail oriented
3. Excellent analytical, organizational, communication, planning, and decision making skills
 
Job Number: 9256
Job Location: Savannah, GA
Rate: 39-44
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3 (Structural & Mech Testing)

Description:
Please share updated resume at ravi@iconma.com if interested

Test & Evaluation Engineer 3

Location: Mesa, AZ
Duration: 6 months

Primary Responsibilities
- Work in an engineering developmental test lab to design, implement and test structural and mechanical components.
- Develop detailed test procedures, including instrumentation and configuration definition needed to perform the test and minimize risk.
- Design components, sub-assembly and load system hardware and use analytical tools to verify the design with a focus on safety.
- Assist in coordinating the manufacture and assembly of test hardware.
- Review test data for accuracy, quality and fidelity.
- Create test reports for delivery to the customer.

Basic (Required) Qualifications
- Bachelor's Degree or higher is required.
- Direct working experience in the areas of developmental test, automotive or aerospace engineering.
- Unigraphics and/or CATIA experience is required.

Preferred (Desired) Qualifications
- Minimum of 4 years of structural test experience supporting aircraft structures
- Experience with industrial test laboratory environments and procedures
- Experience with structural, mechanical, and dynamic component interrelationships and capabilities
- Experience in a lab environment with data acquisition systems and test instrumentation.
- Experience with MTS AeroPro software.
- Vibration test equipment, fixture design, testing standards end execution of vibe tests.
- Experience with sensors including accelerometers, strain gages, thermocouples, load cells, and microphones.
- Experience with principles of operation of transducers.

Skill Code:
63Z-Structural & Mech Testing
 
Job Number: 18-10021
Job Location: Mesa,, AZ
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3 (Test Instrumentation)

Description:
Please share updated resume at ravi@iconma.com

Test & Evaluation Engineer 3

Location: Mesa, AZ
Duration: 6 months

Job Description:
Work in the engineering developmental test lab to design, develop, setup and operate instrumentation and test control equipment. Develop detailed test procedures & designs for the implementation of hydraulic control and data acquisition systems needed to perform experimental static and fatigue tests on specimen components for qualification & verification. Design & develop test hardware and system from source equipment to achieve test requirements. Analyzes, processes and format data to customer requirements.

Applicant must have a minimum of 5 years of instrumentation experience in the specific areas of instrumentation, hydraulic controllers and data acquisition systems. Applicant must posses direct working experience in the areas of developmental test, automotive or aerospace engineering.

Prefer at least 3 years of direct work experience with MTS FlexTest, MTS Muilti Purpose Test (MPT) Software & MTS AeroPro Test Software. It would desirable if applicant possessed experience with electrical system design layout using AutoCAD or MS Visio software packages.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
64C-Test Instrumentation
 
Job Number: 18-10022
Job Location: Mesa,, AZ
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer - Level 2

Description:
Location: Bothell, WA
Rate: $35.00 - $45.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Possible

****MUST be a U.S. Citizen****

Description
- Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Utilizes CAD/CAM to design tools. Involved with start-up activities associated with new product introduction including developing tooling concepts, detailed tool design, ordering, tracking, final prove in of tooling, and process development and implementation.
- Provide support to manufacturing engineering in development and implementation Manufacturing Process Plans (MPP's) for a variety of electronic, mechanical, and electro-mechanical/optical assemblies.
- Will utilize software programs to develop MPP's, design tooling, support equipment, and process flows.
- Provide technical guidance and support to manufacturing assembly team.
- Apply lean manufacturing techniques to reduce cost and increase yields.
- Investigate root cause of failures/defects and implement corrective action to support continuous improvement.


Skill/Experience/Education
Mandatory:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- EPDM experience
- Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
- Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
- Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
- Candidate should have hands on experience with building/assembling hardware, and the ability to clearly communicate instructions, verbally and written, providing clear direction for subsequent builds

Desired:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- Experience with manufacturing processes (electronic, mechanical, optical assemblies), GD&T, precision machining, assembly sequences.
- SAP experience
- Able to identify and implement process plan changes to preliminary and existing work instructions (MPPs).
 
Job Number: 9373
Job Location: Bothell, WA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
UX Designer/Front-End Dev

Description:
We are looking for a passionate and creative Senior Front-End JavaScript Developer to deliver innovative software solutions to our Risk Management and Core Clearing Systems here in Chicago or Dallas.

RESPONSIBILITIES:
Designing, developing and implementing web applications. This will include implementing new product features, enhancing and maintaining existing functionality, testing and tuning for performance, and building capabilities for application monitoring
Participating in design discussions, review sessions and prototyping
Integrating disparate data from REST and WebSocket services within a cohesive user interface.
Championing agile methods and practices; leading team meetings and discussions
Collaborating between various user groups to translate user needs and requirements into application functionality.
Building strong and lasting relationships with business and technology stakeholders while negotiating business requirements and priorities
Participating in innovative design and proof of concepts with emerging technologies and solutions
Advocating industry best practices like continuous integration, continuous deployment, automated testing, TDD etc.
REQUIREMENTS:
5+ years of experience in building user interfaces using HTML5, JavaScript and related technologies with a strong focus on User Experience
Strong knowledge of JQuery, JQuery UI, Backbone, Bootstrap, Service Workers and experience building applications with vanilla JavaScript
Excellent understanding of both front end (JavaScript, HTML, CSS) and server side (Node.js, Java or Python) technologies
Excellent communication skills; verbal skills and written presentation skills.
Solid understanding of functional programming, object oriented programming and CS foundations
Structured, organized, methodical thinker; Persistent, creative, tenacious work ethic.
Bachelor’s degree in Information Systems, Computer Science or related field or an equivalent combination of education and work experience
Background in Event Driven Architecture and complex distributed systems that are highly available and scalable
Developed applications for the financial industry with real time data processing is a plus
Electronic trading software knowledge is a plus
 
Job Location: Chicago or Dallas
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Back to Advanced Job Search