Job Search Results

967 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/13 Tuesday 08:54PM Pacific Time by ContractJobHunter. )

Listings 1 - 967

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2393 - EEDA SPECIALIST - cv, word doc only

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.

Possess, as a minimum, a Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Possess a minimum of 8 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

You may also have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

You are also able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management.

Experience with certification authorities' liaison is an asset.
 
Job Number: 2393
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2396 - PROPULSION/PNEUMATIC SYS. ENGINEER - cv, word doc only

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

10-15 years%u2019 experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment. Ability to communicate in both languages written and spoken would be a strong asset.
 
Job Number: 2396
Job Location: Toronto, Canada
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/26/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2402 - CABINET INTEGRATOR - cv, word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Must be challenge-driven, results-oriented and problem-solving oriented;

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college

Familiar with the CATIA V5 3D design tool;

Good oral and written communication skills in English and French;

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority;

You are customer focused, problem-solving and innovative focus as well;

You are autonomous, flexible and results-oriented through project management skills;

Experience in the design or installation of cabinets to be assembled.
 
Job Number: 2402
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2407 - STRESS ANALYST - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations.

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work
.
Sign engineering drawings and documentations.

Prepare Test Plans and approve Test Reports.

Support various research and development projects.

Bachelor in aerospace or mechanical engineering.

Have a minimum of 5 years MRB experience.

Experience including at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Practical knowledge and experience of Nastran/Patran
Excellent knowledge of aircraft structure and system installation technical requirements.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Are customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2407
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 06/04/2018
Last Updated: 06/14/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2414 - MECHANICAL DESIGNER - CABINETS - cv word doc only

Description:
Act as a specialist in aircraft interior cabinets;

Search for information related to project assignment to the interior and exterior of the aircraft;

Manage customer requests related to customizations of interior options;

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above;

Assume responsibility for Definition engineering deliverables and milestones that the department must meet;

Act as the technical focal point for the engineering external suppliers.

Manage and conduct quality, productivity and cost governance with the engineering external suppliers.

You must be challenge-driven, results-oriented and problem-solving oriented;

Excellent knowledge in design and development of concepts using graphic design software.

Bachelor's Degree in Mechanical or Equivalent Engineering or college.

Familiar with the CATIA V5 3D design tool and Enovia V5.

Well organized and focused on projects.

Good oral and written communication skills in English and French.

Collaborate in a multidisciplinary team, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.

Experience in the design or installation of cabinets to be assembled.

Knowledge of certification requirements is an asset.

Understanding of interiors products integration in Business (preferred) or Commercial aircraft is required.
 
Job Number: 2414
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/29/2018
Last Updated: 06/27/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 11/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2438 - MISSION SYSTEMS ENGINEERING - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Candidates must possess a degree in Engineering (Systems Design, Aerospace, Electrical, Software, or Mechanical Engineering)

Must have a proven track record as a System Designer/Architect capable of conceptualizing, designing and building complex systems from initial customer requirements through to product delivery and commissioning.

Eight (8) or more years of experience of diverse product development in end-to-end deployed systems in a leadership role is required.

Experience developing and mentoring engineers and other technical staff.

The candidate must have comprehensive engineering knowledge in more than one discipline.
 
Job Number: 2438
Job Location: US Northeast, US Northeast
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24 Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2440 - ELECTRICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Electrical engineers to currently support a number of programs across the Space Mission organization.

Candidates must have a Bachelor's or Master's degree in electrical engineering.

Must be experienced utilizing electronic design tools such as ORCAD Capture, PSpice A/D including Advanced Analysis, OrCAD Signal Explorer, ISE Design Suite, ModelSim, Synplify, and Matlab/Simulink.

Proficient with laboratory equipment: power supplies, multimeters, function generators, oscilloscopes, dynamic signal analyzers, impedance analyzers, and network analyzers.

Candidates are expected to understand the basics of interfacing between hardware and software.

Experience developing and/or testing equipment for space applications.

Familiar with Actual Fusion, Xilinx V5, and arm microprocessor would be an asset.
 
Job Number: 2440
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2441 - SOFTWARE DEVELOPMENT ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Software Development engineers currently support a number of programs across the Space Mission organization.

Candidates must possess a Master's degree in Computer Science or Computing Systems Engineering.

A minimum of 4 years design and development experience with 2 years in Rovers software development, QNX and RTEMS experience and related device driver development.

Must possess experience with languages such as C, C++, Java, Matlab/Simulink and the ability to work closely with electrical engineers.

Well versed in software lifecycle, software configuration management and development process.

Design, development, implementation of Data Handling Unit and basic understanding of Avionics systems.

Experience with Pushbroom, CMOS telescopes and the following interfaces: SpaceWire, Hotlink, LVDS, UDP TCP/IP, CSSDS, RS422, CAN bus , SPI , 8051, Fusion.
 
Job Number: 2441
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2443 - STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports

Support various research and development projects

Bachelor in aerospace or mechanical engineering.

Minimum of 5 years MRB experience.

Experience, including at least one of the following skills, structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Have practical knowledge and experience of Nastran/Patran

Excellent knowledge of aircraft structure and system installation technical requirements.

Knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.
Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Bilingual - have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2443
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2444 - MATERIAL & PROCESSES - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare and approve Test Plans Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;
Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 8 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical aerospace and military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

A team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).

You are familiar with flammability certification requirements as per FAR 25.
 
Job Number: 2444
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/13/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2445 - PRODUCT STRUCTURE MANAGEMENT - cv, word doc only

Description:
Responsible for the Product Structure Management within the Global 7000-8000 Program for Interiors and Completions Engineering.

Create and maintain the top levels of a configured product structure from the design phase through certification and transitioning to a sustaining program.Participate in the organization of the completions product structure to optimize Engineering packages with all available customer options.

Participate in the maintenance of the Options Catalog.

Configure the engineering packages in the PLM system and create AC specific product structures.

Work with the Customer Interfacing Team to create project specific Options listings.

Create the Customer Configuration Lists defining all engineering packages required to meet selected options and create Top-Level AC specific engineering lists.

Maintain and define rules controlling the applicability of the Engineering packages in relation to Customer options. Program these rules in the VSpec Customer Definition Software.

Responsibility for control, health and quality of the Aircraft Interiors configured product structures.

Keep an oversight over the product changes and maintain the product structure.

Support the Completions Engineering groups at different
development and customer aircraft definition milestones as needed.

A degree in Aerospace or Mechanical Engineering or equivalent education.

Minimum of 5-7 years%u2019 experience in design, product configuration management.

Possess strong knowledge and technical expertise of product structure configuration within a PDM/PLM tool is essential.

Knowledge of aerospace industry best practices.

Are proficient with ENOVIA VPLM V5 product suite, especially with the product configuration workbenches.

Have knowledge of Business Aircraft Completions.

Experience on CATIA V5, experience with Knowledge Based Engineering (KBE) is an asset

Have experience with SAP & eProduct.

Have experience in pulling together the efforts of varied groups with different objectives and mindsets towards a common objective.

Are resourceful in identifying and removing roadblocks and looking for creative ways to overcome challenges, and can maintain a strong adherence to the Program long-term vision.

Motivated by challenges and a drive for results, bringing a proven track record of success

Good communication and technical report writing skills - able to clearly and concisely convey information and vulgarize technical subjects.

Bilingual (French and English), oral and written is an asset.

Would be available to work on a Tuesday to Saturday schedule if required.

Have a sense of teamwork, the ability to work with minimal supervision, the ability to work in a dynamic environment, you are mobile (Montreal) and you are able to make decisions autonomously.
 
Job Number: 2445
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Software / Systems Engineer 3

Description:
PDS Tech, Inc. is seeking a Systems Engineer for an open position in El Segundo, CA
  • Primary Responsibilities:

    - Develops and maintains code and integrates software components into a fully functional software system and assists

    with test procedures and documenting test results to ensure software system requirements are met.

    - Supports software project management.

    - Troubleshoots software issues and works under general supervision.

Qualifications 

This position requires the ability to obtain a US Security Clearance, for which the US Government requires US Citizenship.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.



Basic Qualifications:

- 2+ years of performing server software development in Java.

- 2+ years of experience developing ground control software.

- 1+ years of experience with SQL Server databases.

- 1+ years of experience with validation testing.

- Experience with software integration.

- Experience with XML.

Preferred Qualifications:

- Experience with avionics control algorithms, hardware interfaces and I/O device drivers, networking, SQL and nonrelational

databases, web-based development.

- Java software development experience running in the JBoss / Wild-Fly service bus.

- Experience with Payload Command generation and Payload Telemetry processing.

- JUnit Test experience.

- Experience performing JAXB code development.

- Experience with TCP/IP data transfer.
 
Job Number: 1810081318
Job Location: El Segundo, CA
Duration: 10 months
Input Date: 02/09/2018
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dl3hAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Optics Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Advanced Optics Engineer
(U.S. Citizenship Required*)
Florham Park, NJ
2018-6199

Responsibilities:
• Design, develop, build, and test systems & products based on optic, photonic and laser technologies
• Interact with device, hardware & software design teams to assist in overall development of optical systems; specifying, selecting and qualifying active & passive optical components, developing and benchmarking system performance models, developing and implementing test procedures and/or evaluating and selecting appropriate test instrumentation
• May provide recommendations for cost reduction efforts
• Participate in electrical & optical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (optical loss, timing, power, etc.), design, integration, and verification of electrical components, equipment, and systems
• Apply principles and techniques of Electrical & Optical Engineering
• Perform root cause analysis for electrical & optical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
• Participate in design reviews of electrical & optical components, equipment & systems
• Evaluate vendor capability to support product development
• Apply a good understanding of the organizationally defined optical processes used throughout the lifecycle of the program or project
• Support the generation of engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
• Contribute to the research & analysis of data, such as customer design proposal specifications, and manuals to determine feasibility of design or application
• Select components & equipment based on analysis of specifications & reliability

Qualification:
• Required – able to obtain TS/SCI clearance with polygraph.
• Considerable use of optical and electrical engineering concepts, principles, and theories
• Considerable knowledge of telecommunication applications
• Considerable knowledge of optical engineering processes
• Keeps abreast of technology trends
• Aware of business objective and Engineering role in achieving
• Considerable knowledge of Microsoft Office applications
• Considerable knowledge of electrical engineering design tools
• Considerable written and verbal communications skills
• Understands and begins to apply basic project management principles including IMS, earned value, and score cards
• Considerable ability to recognize and clearly report information relevant to sound electrical engineering design
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in Electrical Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6199
Job Location: Florham Park, NJ
Rate: Based on experience
Duration: 12 Months
Input Date: 06/13/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Houston, TX

Description:
STS AeroStaff Services now offers Aircraft Records Specialist jobs in Houston, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Records Specialist is responsible for data entry, audits, and updates of daily production documentation by the maintenance organization.


Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items

• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance

• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system

• Performs the removal and installation of components in the Component Control System module of the maintenance computer system

• Reviews and Updates documentation pertaining to AD’s and modification compliance in the Modification Control System module of the maintenance computer system

• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft

• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system

• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports

• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance

• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations

• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations

• Produces Aircraft Records specification reports when requested from outside parties

• Monitor correction requests

• Interact with Planning, Records, Reliability, Production and Engineering departments

• Responsible for verifying the accuracy of maintenance databases through various reports

• Submits recommendations for process improvements and assists Records Analyst in training new Employees


Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred

• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred

• Must be able to master PC software packages including Microsoft Excel/Word/Access applications

• Experience working with an imaging system software is a plus

• Experience working with the Maxi-Merlin main frame application is a plus

• Ability to learn to read technical documents, follow instructions, and understand office procedures

• Must have vision ability sufficient to view and read computer monitor on a frequent basis Must be able to lift 30 pounds and drive on secured airport property

• Must be able to comply with Company attendance standards as described in established guidelines

• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information

• Must have a valid driver’s license at time of hire and be comfortable driving at night

• Candidate must be able to type 40 WPM, detailed oriented, self-starter, dependable, able to multi task, work in a close environment with a Team and able to work productively with little supervision


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42283
Job Location: Houston, TX
Duration: Contract
Input Date: 06/04/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Equipment & Tool Designer

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-03769
Job Location: Troy, MI
Rate: BOE
Per Diem: yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/15/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Eric Janda
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the aircraft.

Previous Garmin experience is required.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.

Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-022
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/02/2018
Last Updated: 09/26/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Work as a member of a team of systems engineers performing and providing technical direction for the development, engineering, interfacing, integration, and testing of complex hardware/software for Mission Systems products consisting of military and civil flight data recorder products and/or military stores management systems products while positively affecting short-term and long-term business goals and objectives.



" Experience in the following systems engineering lifecycle phases: concept development, requirements management, system architecture, system design and development, systems integration, systems verification & validation

" Experience working on projects with a requirement for RTCA/DO-254, RTCA/DO-178B/C or equivalent

" Familiarity with Military interface and environmental standards such as MIL-STD-1553, MIL-STD-1760, MIL-STD-461, and MIL-STD-810

" Experience with engineering tools such as Dimensions, DOORS, or Enterprise Architect

" Familiarity with basic programming and scripting languages such as Visual Basic, Python, or C

" Familiarity with Problem Reporting and Change Control processes

" Existing Systems expertise within the Aviation Industry

" Provide required customer interaction to specify top-level requirements for systems that meet the customer goals and further refine these top-level requirements into specifications, architectures, configuration baselines, and lower-level requirements suitable for implementation

" Responsible for project planning activities, including work tasks, project scope, schedule and budget




 
Job Number: 18-23067
Job Location: Grand Rapids, MI
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-17 00:00:00.0
Start Date: 2018-06-18 00:00:00.0
Input Date: 06/05/2018
Last Updated: 06/17/2018
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

C# Interface Software Engineer- Top Secret Clearance, Clifton, NJ 07014

Description:
PDS Tech, Inc. is seeing Software Engineers with Top Secret DoD clearances in Clifton, NJ.  07014  Please send resume to Elisa Petersen at epetersen@pdstech.com or call at 316-448-0890.

Provide engineering services in command and control applications including requirement analysis, design, development, test, and sustainment for cutting-edge communications and information processing software systems as directed.  Provide monthly status reports of activities supported in subcontractor format. Travel as required.

Labor skills requirements:
  • TS/SCI clearance, active CI polygraph preferred
  • Bachelor’s degree in Computer Engineering, Computer Science, or related field with a minimum of 5 years of applicable experience
  • Minimum 3 years of direct software development experience with

(1) User interface software applications in C#, WPF, WCF, and Python working with Visual Studio .Net and the Windows application domain OR
 
  • Experience with various software architectures and platforms
  • Thorough understanding of software engineering principles, processes, and industry best practices with the ability to apply them in daily work
  • Ability to read, analyze and interpret requirements and common government specifications
  • Skilled in independently balancing a fair work load, managing priorities, maintaining a commitment to quality standards, overcoming obstacles, and achieving results
  • Experience implementing software applications involving the government customer
  • Organizational skills to work with a variety of people in different disciplines, working from multiple locations on tasks involving rapidly changing information
  • Strong communications skills both written and oral as well as presentation skills to communicate information effectively to both internal and external customers, managers and technical staff

Engineering support required for a six-month period of performance after receipt of order (ARO) with option to extend in 6-month increments.
 
 

 
Job Number: 1810081296
Job Location: Clifton, NJ
Duration: 6 months
Input Date: 02/12/2018
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkuYAAQ&URLSource=cjhunter

C++ Embedded Systems Engineer - Top Secret Clearance, Clifton, NJ 07014

Description:
PDS Tech, Inc. is seeing Software Engineers with Top Secret DoD clearances in Clifton, NJ.  Please send resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890.

Provide engineering services in command and control applications including requirement analysis, design, development, test, and sustainment for cutting-edge communications and information processing software systems as directed.  Provide monthly status reports of activities supported in subcontractor format. Travel as required.

Labor skills requirements:
  • TS/SCI clearance, active CI polygraph preferred
  • Bachelor’s degree in Computer Engineering, Computer Science, or related field with a minimum of 5 years of applicable experience
  • Minimum 3 years of direct software development experience with


(1.) Embedded systems in C++ working with Linux/Ubuntu operating systems. RTOS experience is preferred.

  • Experience with various software architectures and platforms
  • Thorough understanding of software engineering principles, processes, and industry best practices with the ability to apply them in daily work
  • Ability to read, analyze and interpret requirements and common government specifications
  • Skilled in independently balancing a fair work load, managing priorities, maintaining a commitment to quality standards, overcoming obstacles, and achieving results
  • Experience implementing software applications involving the government customer
  • Organizational skills to work with a variety of people in different disciplines, working from multiple locations on tasks involving rapidly changing information
  • Strong communications skills both written and oral as well as presentation skills to communicate information effectively to both internal and external customers, managers and technical staff

Engineering support required for a six-month period of performance after receipt of order (ARO) with option to extend in 6-month increments.
 
 

 
Job Number: 1810081277
Job Location: Clifton, NJ
Duration: 6 months
Input Date: 02/12/2018
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkshAAA&URLSource=cjhunter

C/C++ Principal Software Engineer- Active DoD Secret Clearance. El Segundo, CA

Description:
PDS TECH INC. has an exciting opportunity for the role of, Principal Software Engineer -Secret Clearance position located in El Segundo, CA 90245

CONTACT: Sana Khan,   DIRECT#: 314-665-2124,   EMAIL: skhan@pdstech.com  

Also Share this job with your friends and get rewarded with an exciting Referral Bonus. 

NOTE: 12 months Contract. Applicant must be a US Citizen & Must Have Active DoD Secret Clearance

Summary:
  •  Candidates have the opportunity to work alongside and be mentored by the best and the brightest engineers and scientists who are providing radar and sensor solutions which deliver superior detecting, ranging, and tracking for military forces worldwide.
  • In addition to maintaining a strong portfolio of core capabilities, we continue to expand globally and innovate in our growth markets.
  • Opportunities exist to participate on innovative teams which are providing the most advanced research and development capabilities to solve the most complex problems.



  • Typical job functions for the Senior Software Engineer I position include planning, conduct, and coordination of software designs, software development, documentation, testing, and debug of software that contains logical and mathematical solutions to business/mission problems.
  • Our Software Engineers apply the appropriate standards, processes, procedures, and tools throughout the development life cycle as well as correct program errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities to resolve questions of program intent.


Required Skills:
• Minimum 8 years of related technical individual contributor experience in large team software engineering development
• 6+ years experience with C/C++ programming and similar languages
• 6+ years experience in Green Hills Integrity Real-time Operating Systems, board support package (BSP), Green Hills Multi IDE for C/C++ or related operating systems • 6+ years experience in real-time development and architecture for GPS Receiver software
• Real time embedded programming, Communications Systems, and Signal Processing
• Work related experience in algorithm and hardware design • Working knowledge of Microsoft Visual Studio and Mathlab
• Applies and/or develops highly advanced technologies and concepts exhibiting an exceptional degree of ingenuity, creativity and resourcefulness in the architecture, design and concepts consistent with systems requirement and interface designs
. • Proactively seeks to uncover and resolve issues associated with the development and implementation of operational programs across the product line.
• Experienced presenter to all levels of management and experience writing technical documents such as software requirements and design documents
• Experience in a matrixed environment working with Integrated Product Teams (IPTs)
• Working experience in MS Office or other presentation tools
• Active DoD Secret Clearance

Desired Skills:
• Working knowledge with MIL-STD-1553, IS-GPS-153 Serial Interface protocol, signal selection, acquisition and tracking, Position, Velocity, and Time (PVT) calculation, data demodulation, signal correction, jamming and spoofing or related applications
• Understanding of Board Support Package for ARM Processor, Atom Processor, and PPC
• Basics understanding of FORTRAN, ClearCase, ClearQuest, and DOORS
• Familiarity with Agile lifecycle process including Scrum, Continuous Integration, Static Code Analysis using Coverity, Unit Test using VectorCast, and Test Driven Methodologies • Understanding of software best practices and development lifecycles
• Understanding of standard system engineering design artifacts such as Use Cases
• Must have demonstrated ability to produce robust, well-documented, production-quality code which includes conforming to design and coding standards, implementing error handling routines, etc.
• Must have demonstrated ability to develop software using industry standard process such as Capability Maturity Model Integrated (CMMI) Level 3 Required Education: BS or higher degree in Engineering, Science, Mathematics, Physics, or equivalent. 
 
 
Job Number: 1810082934
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 05/24/2018
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sana Khan
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1gmAAA&URLSource=cjhunter

CAD Drafter / Designer

Description:

PDS Tech, Inc. is seeking a CAD Drafter / Designer for an open position in Jacksonville, FL. 
The ideal candidate will perform mid to high level complexity drafting and design of Assembly level CAD Drawings


Must be proficient with SolidWorks CAD software including:
  • 3D modeling
  • Creation of Drawings
  • Geometric Dimensioning & Tolerancing.

Education Associates Degree
 
 
Job Number: 1810085016
Job Location: Jacksonville, FL
Per Diem: No
Duration: 6 months
Input Date: 04/30/2018
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mOFxAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAE Engineer

Description:


Description:

BS Degree in ME/AERO. Minimum of 6+ years of industry experience as CAE analyst and specific solver software usage depending on department speciality area. Minimum of 5 years of experience using pre-prcessor / post-processor tools (Hyperworks) for complex vehicle system level CAE model construction, visualization, and analysis. Related advanced degree may be substituted for 2 years of experience.
 
Job Number: NSR10028CAE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 08/15/2018
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CONTRACTS SUPERVISOR

Description:
JSG is seeking a Contracts Supervisor for one of our premier Aerospace clients in Moorpark, CA. This is a full-time permanent opportunity.



Job Summary:

The Contracts Supervisor provides oversight and guidance to the Moorpark office contract management team. The contracts team is tasked with establishing and maintaining contractual agreements that facilitate: 1) a clear understanding of commitments, 2) balancing risk between the company and the customer, 3) timely invoicing and payment, 4) positive customer relations, and 5) accurate communication with the internal organization.

Roles and Responsibilities:

The Contracts Supervisor’s main responsibilities include:

Provide oversight, leadership and development to a team of contract professionals.

Represent the Contract Administration organization with peer organizations and customers to develop plans, organize work, negotiate terms, monitor progress, and resolve problems.
Assure that all clarifications and amendments of negotiations are incorporated into the final contract.
Participate in the planning, organizing, monitoring, and assessment of the team’s work.
Direct responsibility for handling high profile contracts from cradle to grave, including but not limited to:
Review solicitation and prepare responses for proposals, bids, and contract modifications.
Analyze contracting requirements, special provisions, and terms and conditions to ensure compliance with laws, regulations, corporate policies, and business unit procedures.
Prepare and administer the necessary correspondence, negotiation memoranda, and contract documentation to ensure timely and coordinated submittals.
Prepare, organize, and maintain contract records and files documenting contract performance, compliance, and contract closeout.

Requirements and Education:

The successful candidate must have a Bachelor's degree in a business or technical discipline. Master’s degree or JD preferred.
6 or more years of contracts management experience with 1-2 years of supervisory experience in a manufacturing environment working with government and commercial aerospace and defense contracts.

Prior work experience interpreting contract requirements, terms and conditions evaluation and negotiation.
Knowledge of FAR/DFARs requirements and US Government export regulations are also desirable.
Responsible for interacting with all business segments and management.

Must be a U.S. Citizen.

Competencies:

Excellent written, verbal and presentation skills suitable for interaction with customers and various levels of management.
Efficiency, attention to detail, and a high level of accuracy.
Self-starter with strong analytical and problem-solving skills
Effective time management skills.
Capable of dealing with multiple internal and external (domestic/international) customers
Ability to Work with offsite teams.
Proficient with Microsoft office suite software.
Knowledge with IFS, SAP, Oracle or other type of ERP/MRP software.
Knowledge of FARS, DFARs, EAR and ITAR requirements a plus.
 
Job Number: 366381
Job Location: Moorpark, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 07/27/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Cabeling Designer

Description:
We are looking for an Electrical Designers that will be responsible for leading the electrical design process of related components and systems from concept to production in order to achieve the product objectives within a specified time.

RESPONSIBILITIES:
1. Establishes a reasonable project development schedule from concept to production implementation in line with overall business requirements.
2. Supports all design related component styling, purchasing and manufacturing issues with emphasis on quality, reliability, timely delivery, and cost.
3. Determines ideal electrical component placement and manufacturing route to ensure overall design, performance, and cost conformance.
4. Determines nature and type of electronic models, detail drawings, and analysis required to support the above and supervises their release through the release cycle.
5. Prepares preliminary sketches and/or schematic diagrams and/or presentations to aid in the understanding and solution of engineering problems.
6. Participates in design reviews on projects to ensure adequate input and involvement from all interested groups.
7. Performs other miscellaneous project related assignments.

Requirements:
1. 5 years minimum related design experience
2. Required - extensive experience with Pro-Engineer (Creo 2.0 or 3.0)
3. Desired - extensive experience with Pro/Cabling
4. Desired – extensive experience with Routed System Designer (RSD) & Creo Schematics 2.0 or 3.0
5. Superior technical knowledge as demonstrated by academic experience and broad practical experience in design.
6. Excellent verbal and written communication skills.
7. Demonstrated ability to lead major process change in a way that enhances overall corporate performance.
8. High level of people skills, able to work in a team environment.
9. Ability to work with domestic and international technology partners.
10. Direct and coordinate contract design team.
11. Microsoft software including Excel, Project, Word, Outlook and PowerPoint
 
Job Number: AG
Job Location: Wyoming, MN
Rate: 45
Per Diem: C2D
Overtime: Possible
Duration: 6 months c2D
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Development EWIS AR/DER

Description:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company

As an EWIS AR for Cabin Development, you will:
• Review and approve engineering designs for EWIS compliance aspects
• Interact and coordinate with FAA/DERs/ARs during a certification project
• Coordinate, complete and track certification tasks
• Write/review/approve certification plans, test plans, test reports and prepare related paperwork and forms.

What you'll bring to the team:
• Preferably, you will have been a Gulfstream Authorized Representative (AR), a Company AR at another company or an FAA Delegated Engineering Representative (DER)
• Knowledge and understanding of CFR14 - Part 21, 23, 25, 91, 135
• EWIS Certification and DER experience finding compliance with 14 CFR Part 25, Subpart H, Sections 25.1701 through 25.1733
• Expertise with aircraft interiors required
• Experience with certification activities associated with Supplemental Type Certificates (STC)

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Word
• Excel
• Power Point
• Outlook

Education
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15+) years progressively responsible engineering exp in specific tech discipline with Bachelors.
• Requires approval of Eng PRB incl bus justification

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry
 
Job Number: 24-261
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer
Savannah, GA
Rate: $55-$62

Unique Skills:

Unique Skills: -This position provides technical and project oversight of projects for Post-TC design changes for company's certified aircraft. -The chosen candidate will serve as a liaison between the company (the applicant) and FAA/ODA, engineering focal and other Civil Aviation Authorities. - The chosen candidate must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure in the aircraft TC and Post-TC design change (both major & minor) projects - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in aircraft TC and Post-TC design change (both major & minor) projects is highly desirable Education and Experience Requirements: Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities. Position Purpose: Under minimum supervision, performs a variety of engineering tasks to support Post-TC (Type Certificate) major design change projects and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations. Principle Duties and Responsibilities/Essential Functions: 1. Reviews Post-TC Major Design Change Projects data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure Cert documentation is prepared and processed in accordance with approved procedures. 2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance. 4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects. 5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations. 6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products. Additional Functions: 1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues. 2. Develops department training material. 3. Assumes responsibility for assigned projects, tasks, or processes. 4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues. 5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned. Other Requirements: 1. Must be proficient in working with MS Office software. 2. Strong background with Federal Aviation Administration (FAA) certification processes. 3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must be very experienced in working with regulatory requirements. 5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 6. Must have excellent organizational and planning skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 9000
Job Location: Savannah, GA
Rate: $55-$62
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/02/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Manufacturing Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Circuit Card Assembly Manufacturing Engineer
(U.S. Citizenship Required*)
Tallahassee, FL
2018-6119

Join our electronics manufacturing team as a mid-level Manufacturing Engineer with at least 7 years of experience in CCA design for manufacture and fabrication. You will need to work well within a team and foster positive working relationships with people from diverse job classifications and backgrounds. You will also need the flexibility to positively impact a wide variety of CCA processes in a fast paced manufacturing environment.

Responsibilities:
• Write electronic work instructions to comply with design requirements
• Perform DFM reviews to include panel/PWB design & apply knowledge of manufacturing design best practices
• Drive efficiency and quality improvements in a high mix/low volume environment
• Select and drive procurement of capital technologies to improve capabilities
• Design/procure SMT solder stencils to support production needs
• Analyze quality trends and implement corrective actions
• Perform failure analysis including root cause determination
• Develop manufacturing controls to handle sensitive CCA materials
• Determine and program appropriate reflow profiles for SMT boards
• Set up and structure manufacturing Bills of Material (Oracle experience preferred)
• Provide technical support to production to ensure that goals are met
• Generate SMT programs for hands on operators to run (Siemens/Siplace experience preferred)
• Program solder paste application/inspection equipment
• AOI program for automated inspection (Yes Tech experience preferred)
• Program selective solder (Juki experience preferred)
• Program x-ray for automated inspection (GE experience preferred)
• Support production team and help to implement process improvements
• All other duties as assigned

Qualifications:
• Proficiency and experience with Valor DFM software is a big plus
• Experience with manufacturing under government contracts is preferred
• Experience in high mix, low volume operations is preferred
• Strong technical knowledge and ability to effectively communicate with all organization levels
• Knowledge of MS Office Suite of products and general computer proficiency is required
• Effective verbal and written communication
• Experience with Lean manufacturing concepts (LSS GB, BB, ETC)
• Be able to obtain a security clearance
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Candidate should possess a Bachelor’s Degree in an Engineering discipline, preferably Manufacturing with a minimum of 7 years’ applicable experience.


Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6119
Job Location: Tallahassee, FL
Rate: Based on experience
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Clinical Integration Engineer (JBOSS Req)

Description:
ENEA…an environment where you can innovate.

The Clinical Integration Engineer is responsible for designing, maintaining and solving HL7 integration between our Safety Software and our EHR Partners using Mirth Connect with custom Java code for mapping input and output.

Also, includes onsite participation with customer “go live” events for seamless coordination and administration with our EMR Partners. As well as improving our Java based safety software applications.

Essential Duties & Responsibilities

--Develop object oriented software solutions using Java as the primary programming language.
--Interact and manage multiple EHR Partners and Clinical Integration customers to problem solve in a real-time basis.
--Represent our client with professionalism, which includes appropriate attire when engaged with our partners and customers.
--Lead investigations of complex system level issues to determine root cause and propose resolutions.
--Write and maintain technical procedures and documentation for the application interfaces developed.
--Work in an agile, object-oriented, team environment with version control, change management and continuous improvement protocols.
--Ensure compliance with company’s quality systems and software development practices.

Knowledge, Skills & Qualifications

**MUST HAVE STRONG JBOSS BACKGROUND TO BE CONSIDERED**
Software Engineer with strong knowledge of Java and SQL Server (or other database servers)
Experience with developing HL7 interfaces using Mirth Connect (or other EHR Interoperability Technology)
Ability to perform network diagnostics and/or knowledge of networking protocols
Knowledge of healthcare / hospital environments a plus.
Ability to quickly grasp complex technical concepts and make them easily understandable in text and pictures.
Good data analysis, communication, troubleshooting and writing skills are required.
Ability to work under deadline driven pressure.
Skilled at prioritization and multi-tasking.

Education and Experience

Bachelor’s degree in Computer Science or related field.
5+ years’ experience in a software engineering role.
2+ years’ developing software using Java.
1+ year of JavaScript experience.

We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.

OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: 610
Job Location: San Diego, CA
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 07/26/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Controls Engineer- Equipment and tooling
Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.
(Not mandatory but good too in any of the below):
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 06/05/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
**Must be a U.S. Person for purposes of export compliance. A U.S. Person is defined as either a Green Card Holder or U.S. Citizen.**

**NEED CANDIDATES TO START IMMEDIATELY WITHIN THE NEXT 2 WEEKS!**

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 30657-1
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 05/31/2018
Last Updated: 06/12/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Engineer

Description:
We are seeking for an experienced Cyber Security Engineer for this well-known company in Washington State. You will provide technical knowledge and analysis of highly specialized applications and operational environment, high-level functional systems analysis, design, integration, documentation and implementation advice on moderately complex problems that require an appropriate level of knowledge of the subject matter for effective implementation.

RESPONSIBILITIES:
Strong working knowledge of IA concepts such as patch management, two-factor authentication, host-based security, intrusion detection, security event management and defense-in-depth.
Experience in security architecture design, Security Audit tools, security requirements generation, security testing, administration of security devices such as firewalls and intrusion detection systems.
A strong understanding of Security Technical Implementation Guides (STIGS), HBSS, ACAS, Software Assurance techniques & tools. Additionally, experience with security products such as vulnerability scanning and network assessment tools.
Security engineering skills with a working knowledge of Information Assurance (IA) technology, NIST standards, DoDI 8500.2 and SP 800-53.
Experience in the Cybersecurity Lifecycle to include: generating IA requirements, creating IA architecture design, configuring IA audit tools, conducting IA verification and performing IA compliance.
Excellent technical document preparation and verbal communication skills are required for presentation of technical IA issues

REQUIREMENTS:
Bachelors Degree in Computer Science, Engineering or Cybersecurity with increasingly responsible roles in software/network engineering and the development of Information Assurance solutions.
Experience with Information Assurance policies and procedures and the ability to apply IA requirements to an existing system.
CISSP, CISA, CCIE or equivalent years of experience required.
 
Job Location: Everett, WA
Input Date: 04/27/2018
Last Updated: 06/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Software Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Required Experience:



  • 5-10 years in aerospace/defense industry

  • 4 years of relevant experience in the fields of computer processing technology, PP, AT, or Cybersecurity

  • Experience in requirements generation, design, development, integration, and testing of systems for military applications

  • Experience with weapon systems, processing timelines, and real-time operating systems

  • Experience leading and advising DoD customers on PP issues

  • Experience with program protection concepts, anti-tamper, cryptography, and security solutions

  • Familiarity with documentation and tools such as: DoD 8500 series, DoD 5200 series, NIST Special Publications (800-53, 800-37, etc.)

  • Active DoD Secret Security clearance with ability to obtain Top Secret clearance

  • Project management experience


 


Desired Experience and Skills:



  • DoD Top Secret clearance with current SSBI within last 5 years

  • Cyber Certifications in accordance with DoDD 8570/DoDD 8140 such as CISSP, GSLC, CEH

  • Aircraft/store integration experience

  • Experience briefing customer communities on PP, AT, or Cybersecurity


 


Education Required:



  • BS, Electrical Engineering or Computer Science

  • MS, Electrical Engineering or Computer Science Desired


 
Job Number: O8197317
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Analyst

Description:
Wanted: Data Analyst for our client in New Jersey. Previous experience in applying data science against open source media to support intelligence collection and data fusion. Apply today to be considered for this position!

The ideal candidate for this position will perform the following tasks:
* Design and develop methods, processes, and systems to consolidate and analyze structured and unstructured, diverse sources including big data sources.
* Develop and use advanced software programs, algorithms, querying and automated processes to cleanse, integrate and evaluate datasets and models complex business problems.
* Works with cross-discipline teams in order to ensure connectivity between various databases and systems.
* Identifies meaningful insights and interprets and communicates findings and recommendations.
* May develop information tools, algorithms, dashboards, and queries to monitor and improve business performance.
* Maintains awareness of emerging analytics and big-data technologies.

Mandatory Qualifications and Experience:
* Previous experience in applying data science against open source media to support intelligence collection and data fusion.
* Bachelors in Mathematics, Statistics, Computer Science or equivalent.
* Preferred languages: R, SAS, Python, Matlab, SQL, Hive, Pig, Spark.
* Must be U.S citizen.

Desired Qualifications and Experience:
* Applying data science against open source media to support Intelligence collection and data fusion.
* Predictive Modeling
* Story-Telling and Visualization
* Distributed Computing
* Cloud - AWS and/or OpenStack
* Web Services/API knowledge (REST, GraphQL)
* Common data transport formats (e.g., JSON, XML, Parquet, Avro, Proto Buf)
* Experience with Agile development processes
* Hadoop Ecosystem (e.g., MapReduce, Hive, Pig, Spark, HBase, Kudu, Impala, HDFS) experience
* Java and/or Python programming experience
* Experience with both SQL and noSQL databases

The ideal candidate for this position will possess the following skills and characteristics:
* Must have strong problem solving skills, business acumen, and demonstrated excellent oral and written communication skills.
* Able to work in a team environment
* Basic understanding of Data Science concepts

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127906
Job Location: Moorestown, NJ
Start Date: 06/18/2018
Input Date: 06/27/2018
Last Updated: 06/29/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:


Description:

Job Title: Scale Model Designer


BS Degree in ME/EE/AE. Design Engineer with over 2 years of engineering experience in actual creation of required components per specialty (concept, specification setting and layout creation and negotiation capability) and CATIA V5 experience.

Activities include working from scan / surface and drawing data available for each vehicle development project and designing a scale model that is used for aerodynamic research and development in a scale wind tunnel environment. Along with designing vehicle models, candidate will also be responsible to work with aerodynamic development engineers to develop special test parts, fixtures for sensors, and help design countermeasure parts used in aerodynamic tests. Ideal candidate will have extensive design skills and be proficient in CATIA software package. Knowledge of Magics software would be a bonus, but not required. Machine design and automotive proficiency are a plus, as well as some hands on mechanical abilities. A good understanding of rapid prototype manufacturing techniques is also a bonus.
.
Over time and may be required depending on project load / Schedule.
 
Job Number: NSR10029DE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 06/07/2018
Last Updated: 06/22/2018
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Oklahoma City, OK
2018-6154

Join our C-17 Military Airlifter Program as an engineer to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration.

Responsibilities:
• Work with customers to develop and document complex electronic and electrical system requirements.
• Analyze and translate requirements into system, hardware, and software designs and interface specifications.
• Test and validate to ensure system designs meet operational & functional requirements.
• Monitor supplier performance to ensure system integration & compliance with requirements.
• Solve problems concerning and provide other support of fielded hardware & software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
• Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6154
Job Location: Oklahoma City, OK
Rate: Based on experience
Duration: 6 Months
Input Date: 06/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Please share updated resume at ravi@iconma.com

Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
The client Company is seeking engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, Lab Windows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 664-Electronic Sys Design & Analy
 
Job Number: 18-09719
Job Location: Oklahoma City,, OK
Input Date: 06/07/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Huntsville, AL
2018-6086

Responsibilities:
• Work with customers to develop & document complex electronic & electrical system requirements.
• Analyzes & translates requirements into system, hardware & software designs and interface specifications.
• Test & validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration & compliance with requirements.
• Solve problems concerning, and provide other support of, fielded hardware and software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.
• Possible Technical Interchange Meetings once every 6 months.

Qualification:
• Required – Active Secret clearance. Candidates without clearance will not be considered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6086
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 05/31/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Everett, WA
Duration: 6 months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-08982
Job Location: Everett,, WA
Input Date: 05/24/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Huntington Beach, CA
2018-6093

Join our team as a Level 4 Design & Analysis Engineer in Avionics Engineering on the C-17 Military Airlifter Program.

Responsibilities:
• Serve as a Cognizant Engineer on projects where suppliers design new / altering existing avionics hardware
• Review supplier technical documentation for adequacy and accuracy
• Manage hardware/software suppliers' performance to ensure customer requirements are met
• Support resolution of product integration & field operation issues
• Research new technologies for potential application to C-17
• Develop solutions to technical problems of safety of flight scope and impact
• Apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
• Integrate into teams and collaborate with multiple engineering disciplines to solve moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
• Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
• Work with customers and their company representatives to obtain feedback for product enhancements and corrective actions.
• This position is in Huntington Beach but will move to Long Beach in December/January.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6093
Job Location: Huntington Beach, CA
Rate: Based on experience
Duration: 6 Months
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA/ Long Beach, CA
Duration: 6 months

Description:
The client is seeking a design and analysis (level 4) engineer in Avionics Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities:
- Serving as a Cognizant Engineer on projects where supplier to client are designing new / altering existing avionics hardware
- Reviewing supplier technical documentation for adequacy and accuracy
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 664-Electronic Sys Design & Analy

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-09270
Job Location: Huntington Beach,, CA
Input Date: 05/31/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Huntsville, AL
2018-6084

Responsibilities:
• Lead work with customers to develop & document complex electronic and electrical system requirements.
• Lead & coordinate work to analyze & translate requirements into system architecture, hardware and software designs and interface specifications.
• Lead work to test & validate to ensure system designs meet operational & functional requirements.
• Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provide other support of fielded hardware & software over the entire product lifecycle.
• Research technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Minimal travel

Qualification:
• Required – Active Secret clearance. Candidates without this clearance or higher will not be considered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6084
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 05/31/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Electrical Systems Design)

Description:
Design and Analysis Engineer 4

Location: Everett, WA
Duration: 3 months

Job Description:
Generic Statement of Work:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work:
777X Air supply, support of Qualification testing (coordination between Client Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07302
Job Location: Everett,, WA
Input Date: 04/30/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Design and Analysis Engineer 4 - CA

Description:
Chipton-Ross is seeking 1 Design and Analysis Engineer 4's located in Huntington Beach, CA

RESPONSIBILITIES:
Seeking design and analysis engineers in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program. Candidate to perform Lab Test Equipment/systems Operations, Support & Maintenance, and develop Test Program software modification and integration.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:45 PM

 
Job Number: 168163
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 01/25/2018
Last Updated: 11/13/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Jacksonville, FL
Duration: 6 month contract
Pay Rate: $39.00/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Job Description:
- Performs mid to high level complexity drafting and design of assembly level CAD and Drawings.
- Must be proficient with SolidWorks CAD software including 3D modeling and drawing creation.
- Must have a thorough understanding of ASME Drawing Standards including ASME Y14.5 Dimensioning and Tolerancing (GD&T).
- The applicant will be expected to be capable of generating as well as self-checking full drawing packages including complete dimensioning callouts to meet engineering and design requirements.
- Experience with designing for or manufacturing molded products and associated tooling is a plus.

Requirements:
- Associates Degree
- U.S. Citizen
- 15 – 20 years of experience
 
Job Number: 9133
Job Location: Jacksonville, FL
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/15/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 11/13/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Design & Analysis Engineer III & IV - (AL)

Description:
SEVERAL OPENINGS IN THE HUNTSVILLE, AL AREA.

ACTIVE SECRET CLEARANCE REQUIRED TO START.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (Formerly 'Comforce')
 
Job Number: EEAL-Secret
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Design & Analysis Engineer III - (WA)

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Our Aerospace Client is seeking a engineer on a Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/08/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV - (HB)

Description:
We are seeking a design and analysis (level 4) engineer in Avionics Engineering on a Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities

Serving as a Cognizant Engineer on projects where supplier to Client are designing new / altering existing avionics hardware
Reviewing supplier technical documentation for adequacy and accuracy
Managing hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & field operation issues
Researching new technologies for potential application
Developing solutions to technical problems of safety of flight scope and impact
Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
Work with customers and their Client representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEEngIVHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/31/2018
Last Updated: 07/27/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Active DoD secret clearance to start.
Responsibilities to include the development, integration and documentation of electrical cable designs of air vehicle systems. Develop electrical wiring designs of a functional system including the selection of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc. Designs to be accomplished utilizing the HarnesSys wiring tool and TeamCenter. Create block diagrams, system wiring diagrams and detailed cable assembly “Product Definition Packages” (PDPs) using SAE AS 50881 and proven commercial practices. Facilitation of design reviews with key stakeholders to ensure designs meet requirements. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions.
Qualifications:
Basic Qualifications:
14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education will be considered in lieu of degree. Minimum of 9 years’ experience directly related to aircraft design and integration, as well as proven engineering team leadership abilities or equivalent education/years of experience. Demonstrated experience with 3D modeling software (NX or equivalent). Preferred Qualifications:
Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university. Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing the NX software.
 
Job Number: 682018
Job Location: Melbourne, FL
Rate: 100p/hour
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: June 2018
Input Date: 06/06/2018
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Lead efforts in designing, building, and testing of electrical systems for military, commercial and industrial electronic applications. The candidate will provide electrical engineering expertise and participate in multi-discipline integrated product team working closely with Program Managers and Systems, Software, Mechanical, Electrical and Manufacturing Engineers.


Working knowledge of OrCAD, PADS, Altium, AutoCAD and Solidwork
Experience with leading the Hardware Development Process, including CM, MRB, SDR and analysis
Hands-on experience with the full product life-cycle from engineering proposal to manufacturing release
Experience with military and commercial standards (MIL-STD-461, MIL-S-901D, IPC-610, FCC/CE)
Familiar with MATLAB, C/C++ and other programming languages.
Familiar with mixed signal schematic and PCB layout techniques
 
Job Number: 42270
Job Location: Waltham, MA
Per Diem: pos
Overtime: pos
Duration: 6 mont +
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Candidate will perform electrical design, development, integration and troubleshooting of power, simulated and actual aircraft electrical signals, simulated cockpit electrical panels in Mission Procedures Trainers and lab-based test stands. Candidate will prepare electrical design drawings, assemble, integrate, and test avionics test stand components.

REQUIRED EXPERIENCE:
Knowledge of electrical power, discrete, synchro, analog, and Mil-Std-1553 data interfaces. Experience in electrical design, development, and test of lab-based avionics test stands. Experience with VME-based processor and data interface components.
Circuit board soldering certification. Experience with PC-based hardware and software.
Create and update schematics and mechanical drawing using AutoCAD 4-5 Years
Electronic/Electrical Designs Perform complete simulator electronic/electrical designs. 0-3 Years
Mil-Std-1553 Knowledge of 1553 bus interfaces and implementation. 0-3 Years

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift
Part-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171274
Job Location: Palmdale, CA
Rate: $47 to $70.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: Yes
Start Date: Yes
Input Date: 05/30/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Required Skills:
- Experience designing data acquisition systems for aircraft and test lab environment.
- Working knowledge of force, flow, pressure and temperature sensing technologies.
- Knowledge of ARINC bus architectures; 664, 429, 825
- Experience with IADS data display and analysis software

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8930
Job Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (TSI)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills:
• Experience designing data acquisition systems for aircraft and test lab environment.
• Working knowledge of force, flow, pressure and temperature sensing technologies.
• Knowledge of ARINC bus architectures; 664, 429, 825
• Experience with IADS data display and analysis software

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-244
Job Location: Savannah, GA
Rate: $52-57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Hardware Circuit Design

Description:


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description



  • This position focuses on circuit board designs for digital hardware in communication products.

  • We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering.

  • This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links.

  • Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products.


 


Candidates must have the following skills:



  • Must possess or be eligible for obtaining a U.S. DOD Secret Clearance. U.S. Citizenship is required. Candidate selected will be subject to a government security investigation and must meet eligibility requirements.

  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

  • Circuit board design experience including experience with schematic capture tools

  • Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).


 


Desired Experience/Skills:



  • Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer

  • Knowledge of FPGA, ARM, and DDR memory is highly desired.

  • Knowledge in the area of high speed design practices including signal integrity is also desired.

  • Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems






 
Job Number: R13927
Job Location: Cedar Rapids, IA
Rate: 50-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Test Specialist

Description:
Notes from the Hiring Manager:

* Testing background with electrical work experiences; ability to read blueprints, engineering drawings
* Networking and circuitry exp with above average computer knowledge (Linux, VMWare, Redhat, etc.)
* Awareness/knowledge of electrical safety and power requirements

Summary:

To perform Configuration and Acceptance Testing of Complex Electronic Systems / Assemblies. Performs a variety of complex technical functions related to the support of manufacturing and engineering activities such as set-up, operation, testing or calibration of systems, circuitry, networking, software, and specialized equipment within a production setting.

Job Description:

> Knowledge of analog and digital symbol identification
> Knowledge of test practices and procedures.
> Personal computer skills required to configure and load SW.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
> LINUX Operating System experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

Knowledge, Skills, And Abilities Required:

> 5+ years of experience with an Associate’s Degree (highly preferred) or technical training in a related field
> Must be a US Citizen (applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information).
> State of the art knowledge of electronics - both digital logic and analog basics.
> Knowledge of Linux, VMWare, Redhat & other software packages used in virtual machines.
> Ability to operate test equipment and build test tooling in fully integrated electronic system.
> Knowledge of test practices and procedures, specifically trouble shooting methodology.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to understand component specifications.
 
Job Number: 028_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 06/06/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Loads Analysis Engineers - Many Needed

Description:
**Must be degreed
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis

*Email resumes to mmccarthy@pdstech.com
 
Job Number: BO-OK-Loads/ELE
Job Location: Oklahoma City, OK
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 06/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (WA)

Description:
Generic Statement of Work: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work: 777X Air supply, support of Qualification testing (coordination between Boeing Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEIVWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 04/30/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Embedded S/W Engineer - Level 2 (6) - TX - C

Description:
Chipton-Ross is seeking a Embedded S/W Engineer - Level 2 (6) for an opening in Grand Prairie, TX.

RESPONSIBILITIES:
Client's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS). Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.

Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol. Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.

BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

PREFERRED EXPERIENCE:
Software configuration management tool experience, Razor

EDUCATION:
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165908
Job Location: Grand Prairie, TX
Rate: Up to $80.73 DOE
Duration: 12 Months
Input Date: 10/17/2017
Last Updated: 11/13/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Avionics

Description:
Major purpose:

Software Engineers support computational systems architecture and system software for real-time simulation applications; create new and modified simulation models using established modeling techniques; and work closely with other engineering disciplines.





Required

" BS Computer Science, or related discipline, or equivalent experience required

" Software engineering experience mid-level preferred

" Ability to apply sound engineering principles and develop innovative solutions

" Demonstrated ability to design, develop, document, test and debug simulation software and systems that contain logical and mathematical solutions

" Experience implementing functional requirements for computer software

" Software languages FORTRAN, C/C++, Ada

" ClearCase experience a plus

" Excellent communication skills including oral, written, interpersonal, and listening

" Proven success in a fast paced development environment and possess a willingness to take ownership, accept accountability, and thrive under pressure

" Strong problem solving and analytical skills

" Flexibility to support occasional overtime, weekend work, shift work and site travel (CONUS)

" General computer skills including use of Microsoft Office products



*********Active DoD Secret Clearance within a six year investigation period REQUIRED**********





Desired

" Linux and Unix experience a plus

" Familiarity with aircraft avionics 1553 protocol and simulator experience

" Experience working in a production environment

" Knowledge of different testing methodologies (e.g., White/Gray/Black box testing)

" Experience with Flight Simulation and/or Radar Systems



 
Job Number: 18-20097
Job Location: Binghamton, NY
Rate: 85.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-18 00:00:00.0
Start Date: 2018-06-18 00:00:00.0
Input Date: 05/16/2018
Last Updated: 07/24/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 03/07/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Designer 3
(U.S. Citizenship Required*)
Helena, MT
2018-6094

Responsibilities:
• Investigate and develop complex equipment and tooling concepts/specifications to satisfy aerospace product design & build requirements.
• Participate in design reviews, collect design requirements, create and revise drawings and models, research the application of robotics, automation and new technology to support the build plan.
• Create off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Check designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develop and document equipment & tooling inspection/usage instructions, preventative maintenance plans, and user training.
• Provide technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.
• Maintain hardware and software configuration.
• Assess and make recommendations for disposition of equipment and tooling.

Qualification:
• 5+ years of experience using CATIA V5
• 2+ years of Tool Design experience
• GD&T Standards Training
• 1+ year experience with CATIA V5 advanced surfacing knowledge
• Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and PDM.
Preferred:
• 1+ year(s) experience using Enovia
• 6 months experience in fixture fabrication
• experience with hydraulic/pneumatic design

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6094
Job Location: Helena, MT
Rate: Based on experience
Duration: 21 Weeks, 1 Day
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Helena, MT
Duration: 5 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications:
5+ years of experience using CATIA V5
2+ years of client Tool Design experience
GD&T Standards Training
1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications:
1+ year(s) experience using Enovia
6 months experience in fixture fabrication
Experience with hydraulic/pneumatic design

Additional Information:
Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and client PDM.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-09273
Job Location: Helena, MT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: July 1
Input Date: 06/04/2018
Last Updated: 06/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 4 months (with possible extension)

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer
 
Job Number: 18-07634
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 4 months+
Start Date: 6/4/18
Input Date: 05/30/2018
Last Updated: 06/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 4 months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07634
Job Location: Everett,, WA
Input Date: 05/04/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE AREA.

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: ToolDesEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 06/28/2018
Last Updated: 09/04/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III (Helena, MT)

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications: 5+ years of experience using CATIA V5 2+ years of Boeing Tool Design experience GD&T Standards Training 1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications: 1+ year(s) experience using Enovia 6 months experience in fixture fabrication experience with hydraulic/pneumatic design

Additional Information:

Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and Boeing PDM.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipToolDesMT
Job Location: Helena, MT
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/31/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers (Level 3 and 4)

Description:
Equipment & Tool Designers and Engineers – Multiple Priority Positions

Location: Everett, WA
Duration: 9+ months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education/ Experience:
Degree and typical experience in engineering classification: Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 9 months
Start Date: Asap
Input Date: 05/30/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Equipment & Tool Development Engineer 4 (4) - WA

Description:
Chipton Ross is seeking 4 Equipment & Tool Development Engineer 4's for a contract assignment in Everett, WA.

RESPONSIBILITIES:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM
 
Job Number: 170749
Job Location: Everett, WA
Rate: $DOE
Duration: 4 Months
Input Date: 05/03/2018
Last Updated: 11/13/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 1

Description:
Equipment & Tool Engineer 1

Location: Ridley Park, PA
Duration: 6 months

Description:
Assists with the development of basic equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data for equipment and tooling. Assists with compliance reviews regarding safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Supports the tracking of contractual performance milestones, the development of preventative maintenance and spares plans, assists with production readiness planning, and training of Production and Maintenance personnel. Develops and implements basic work-arounds and maintains configuration of hardware, software and documentation. Assists with the disposition of assets.

Education / Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer

Please share updated resume at ravi@iconma.com for more details.
 
Job Number: 18-07210
Job Location: Ridley Park,, PA
Input Date: 04/30/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3 (Robotics/Automation)

Description:
Equipment & Tool Engineer 3

Location: Everett, WA
Duration: 9 months

Description:
The primary responsibilities of the job roles include the following:
Ensure factory equipment functions to meet production system requirements and verify rate equipment technical requirements are satisfied through procurement and commissioning.
The successful candidate will have automation experience and a strong problem solving background troubleshooting complex production equipment as well as an ability to support procurement of rate equipment projects.

Responsibilities include the following:
- Supports the evaluation of program and project requirements, develops moderately complex equipment concepts and designs solutions for the Production System.
- Ensure compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
- Validates contractual performance milestones, maintains configuration control, conducts project and in-depth technical reviews, prepares plans for productions readiness, preventative maintenance, and spares.
- Conducts equipment training for Production and Maintenance personnel. Develops and implements moderately complex work-arounds and maintains configuration of hardware, software and documentation.
- Supports in-production equipment and troubleshoots issues working with equipment services to perform root cause corrective action resulting in preventative measures to minimize downtime.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Must have at least 5 years of experience working with manufacturing or equipment systems.
Excellent aptitude to understand the technical details and their effect on the overall system is required.
Familiarity with PLC programming, Siemens and/or FANUC, CNC logic and/or experience programming equipment machine controls is required.

Skill Code: 66U-Designer Engineer

Please share updated resume at ravi@iconma.com
 
Job Number: 18-03766
Job Location: Everett,, WA
Input Date: 05/15/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 4 months Job Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-07642
Job Location: Everett, WA
Input Date: 06/08/2018
Firm Name: ICONMA LLC
Attention: sachin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 6-7 months Description: Key Skill Needs: - Experience leading control system design projects for aerospace and/or automotive industries. - Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment. - Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers. - Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment. - Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc). - Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability. - Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners). - Systems thinking and ability to isolate issues from a variety of interlinked systems. - Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.) - Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects. - Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.) - Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment. - Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc. - Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively. Preferred Systems Experience/Knowledge: - Siemens TIA Portal - Siemens Step 7 PLC programming software - Siemens WinAC RTX - Siemens SINUMERIK 840 D SL System Maintenance and Programming - Siemens SIMOTION software - Siemens HT8 and HMI Pro software - Siemens WinCC Advance and WinCC Flexible HMI programming software - Siemens SCALANCE industrial network switches X408, X308, X208, etc... - Siemens Simatic IT software suite - Sunrise AGV software - Siemens PROFINET Primary Setup Tool - SICK Safety Scanner Configuration & Diagnostic Software (CDS) - Kepware or similar OPC software Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-08984
Job Location: Everett, WA
Input Date: 06/05/2018
Firm Name: ICONMA LLC
Attention: sachin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer
 
Job Number: 18-08984
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: 6/23/17
Input Date: 05/30/2018
Last Updated: 06/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Equipment & Tool Engineer 4 - AZ

Description:
Chipton-Ross is seeking a Equipment & Tool Engineer 4 for an opening in Mesa, AZ.

RESPONSIBILITIES:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

REQUIRED EXPERIENCE:
Must have extensive checking experience.
Must be highly skilled in CATIA & Industry Standards.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM
 
Job Number: 168370
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 02/01/2018
Last Updated: 11/13/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA & ASIC Design/Verification Engineer

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: R13869
Job Location: Cedar Rapids, IA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Analyst 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Facilities Analyst 3
(U.S. Citizenship Required*)
Auburn, WA
2018-6123

Responsibilities:
• Monitor existing complex contract(s) to determine compliance.
• Develop contract specifications for supplier goods & services, and relevant documents.
• Interact with suppliers & buyers.
• Facilitate team relationships to ensure a thorough understanding of the organization's needs & requirements and the continuous improvement of contractual processes.
• Generate plans, acquire materials, and schedule services for facilities activities.
• Create & deploy schedules based on system, customer, and regulatory requirements.
• Communicate with internal & external suppliers & customers to coordinate scheduled activities.
• May research open jobs, validate & confirm availability of labor/non-labor resources (tools, parts) and assets (machinery, building, equipment) to meet routine or complex customer service requests, acquisition and modification of assets, government requirements (e.g., environment, safety), and planned maintenance activities.
• Lead efforts to review, create, improve, and document processes and procedures related to facilities operations.
• Lead or participate in meetings with other organizations such as SHEA, S&MP, Document Control, Legal, Security and Fire, IT to create and validate processes.
• Use project management tools and industry-recognized concepts to develop scope of work, budget, and schedules to achieve desired outcomes on time and within budget.
• Define, design, and plan the project. May coordinate and lead the project team.
• Take a lead role in collecting data from various systems to perform analysis.
• Identify and analyze deficiencies.
• Analyze trend data to identify opportunities for improvement and to develop resolution plans for buildings, equipment, systems, processes, and procedures.
• Make recommendations and implement improvements.
• Support research efforts or independently conduct studies using varied media (financial data, internet, reports, benchmarking studies, new technology, etc.) for determining feasibility, viability, or capability in support of a program, project or customer request.
• Prepare and present reports explaining options, impact, and recommendations.
• Receive internal and external customer requests for services or goods related to buildings, equipment, and systems.
• Coordinate the processing of complex or unique requests to meet customer needs.
• Provide general technical support and troubleshooting for various facilities hardware, software, systems, or processes.
• Ensure configuration control is maintained for data, processes, equipment, and documents.
• Deliver process training and supports the creation of training materials.
• Coordinate with internal training organizations and outside vendors as applicable.
• Perform problem resolution in support of business operations by investigating, developing and preparing alternatives, impact statements, and recommendations.
• Take into consideration objectives and strategies that meet business and infrastructure requirements.
• Conduct studies and make recommendations to support business operations.
• Provide input into budget development.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6123
Job Location: Auburn, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 06/07/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer with active secret CA

Description:
Requirement#AERO-REQ-0832
Work Location Palmdale, CA
Work Week 9/80-A
Priority High
Needed Date 06/19/2018
End Date 06/07/2019
Number of Resources 1
Security Clearance Secret

Title Flight Controls Engineer-N
Description
•Flight Critical Systems
•Failure Management for flight critical systems and failure modes & effects testing
•Flight Test Operations
•Flight Control System mechanization which includes the software and hardware •Failure management for redundant flight critical and integrated systems •Aeronautical Engineering Instruction and System Check Outs for Flight Control System
•On-aircraft problem resolution for all flight control systems to ensure the aircraft is safe and ready for daily flight operations.
•Mission Control Room Support
•1394 Fire Spy analysis tool
•Integrated trouble shooting experience which includes flight control and other Vehicle Systems components which fall outside FCS area
•Flight Test verification and validation activities

Skill/Experience/Education
Mandatory:

Experience with building system integration laboratories, perform system integration and testing of avionics components.

Electrical engineering background with ability to design electrical harness to connect avionics component using Ethernet, serial, analog, and 1553 busses.

Experience with design of power system architecture for avionics components using 5, 20 through 270 volts DC

Demonstrated ability coordinating with systems engineering, hardware designers, and software developers.

Must have a Secret clearance to start
Desired:

B.S. Degree or above in Engineering or related field



Interview Required Yes

OT Allowed No
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0832
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 06/22/2018
Last Updated: 07/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Guidance, Nav & Ctrl Eng (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Guidance, Nav & Ctrl Eng in Orlando, FL.

Description
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.

Skill/Experience/Education
Mandatory:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

Desired:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 166750
Job Location: Orlando, FL
Rate: $DOE
Duration: 12 months
Input Date: 12/05/2017
Last Updated: 11/13/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Guidance, Nav & Ctrl Eng - Level 4 (3) - FL - C

Description:
Chipton-Ross is seeking a Guidance, Nav & Ctrl Eng - Level 4 (3) for an opening in Orlando, FL.

RESPONSIBILITIES:
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.
EDUCATION:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

PREFERRED EXPERIENCE:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166660
Job Location: Orlando, FL
Rate: Up to $65.62 DOE
Duration: 11 Months
Input Date: 11/29/2017
Last Updated: 11/13/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Apps Designer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term W2 contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST BE A U.S. CITIZEN****

Required Skills:
- Must have at least 2 years of Salesforce Administrator experience
- Must have experience collaborating with a Salesforce.com development team
- Prefer candidate with experience configuring a new implementation
- Prefer candidate with Salesforce Administrator certification

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job and 6 years experience as an IT professional with broad experience across multiple IT disciplines or 4 years specific system configuration, development and deployment experience.

Position Purpose:
Designs, develops, tests and implements application software including client, server and middleware. This includes designing and building algorithms and data structures and application performance monitoring and tuning.

Principle Duties and Responsibilities:
Essential Functions: 1. Creates software design at the component level based on the application architecture and the detailed business requirements. 2. Develops algorithms and data structures 3. Develops strategies for the monitoring, preventive maintenance and disaster recovery of applications. 4. Serve as technical expert in at least one application within a portfolio. 5. Assures that solution designs meet requirements for scalability, performance and quality in accordance with negotiated service level agreements. 6. Participates in the assessment and resolution of software defects. 7. Assists project management with the development of work breakdown structures, project plans and skills required. to develop and implement applications. 8. Participates in design reviews for implementation projects. 9. Conducts technical evaluations. 10. Participates in the review, business case development and implementation of software development tools, methodology and software development standards. 11. Understands IS Security measures and current standards, practices and technology.

Additional Functions: 1. Serves as liaison with suppliers for sustaining activities. 2. Assists with evaluation and recommendations regarding purchased software packages, and supporting services. 3. Using knowledge of technology and existing systems, mentors junior staff on building and maintaining application systems. Perform other duties as assigned.

Other Requirements: 1. Expert in one or more software development languages. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Solid understanding of system lifecycle methodologies, software development tools and standards. 4. Experience working in teams. 5. Proficiency with an Integrated Development Environment (IDE) desired. 6. Proficiency with MS Office. 7. Ability to solve problems quickly and completely. Ability to identify tasks which require automation. 8. Strong inter-personal and communication skills; must be capable of explaining complex procedures in writing or verbally. Must be able to write proposals and make presentations to internal customers and professional peers. 9. Provides technical direction for application development teams. 10. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.

A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8913
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/26/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Sr. Mobile Developer

Description:
IT Sr Mobile Developer

Location: Savannah, GA
Pay Rate: $63/hr - $66/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
iOS and android native app development skills. ( Swift, Objective C, Java, HTML, NodeJS ) Experience with Xcode IDE, code repositories (Git), understanding of creating and consuming APIs. Prefer knowledge with JavaScript and React or Angular.

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eight (8) years of experience as an IT professional with broad experience across multiple IT disciplines.


Position Purpose:
Designs, develops, tests and implements complex enterprise applications software including client, server and middleware. This includes designing and building complex algorithms and data structures and application performance monitoring and tuning.

Principle Duties and Responsibilities/Essential Functions:
1. Creates complex software design at the component level based on the application architecture and the detailed business requirements. 2. Develops complex algorithms and data structures 3. Assists with the translation of logical data design to physical database design. 4. Develops strategies for the monitoring, preventive maintenance and disaster recovery of complex applications. 5. Serves as technical expert in one or more applications within a portfolio. 6. Assures that solution designs meet requirements for scalability, performance and quality in accordance with negotiated service level agreements. 7. Participates in the assessment and resolution of complex software defects. 8. Assists project management with the development of work breakdown structures, project plans and skills required. to develop and implement applications. 9. Participates in design reviews for implementation projects. 10. Conducts technical evaluations. 11. Leads the review, business case development and implementation of software development tools, methodology and software development standards. 12. Understands IS Security measures and current standards, practices and technology.

Additional Functions:
1. Serves as liaison with suppliers for sustaining activities. 2. Assists with evaluation and recommendations regarding purchased software packages, and supporting services. 3. Supports management in recruiting and hiring 4. Using knowledge of technology and existing systems, mentors junior staff on building and maintaining application systems. Perform other duties as assigned.

Other Requirements:
1. Expert in one or more software development languages. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Solid understanding of system lifecycle methodologies, software development tools and standards. 4. Experience working in teams. 5. Proficiency with an Integrated Development Environment (IDE) desired. 6. Proficiency with MS Office. 7. Ability to solve problems quickly and completely. Ability to identify tasks which require automation. 8. Strong inter-personal and communication skills; must be capable of explaining complex procedures in writing or verbally. Must be able to write proposals and make presentations to internal customers and professional peers. 9. Provides technical direction for application development teams. 10. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.
A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8848
Job Location: Savannah, GA
Rate: 63-66
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/30/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) - Secret Clearance

Description:
Information Systems Security Officer – Level 3 - Secret Clearance

Location: Sunnyvale, CA
Pay Rate: DOE
Duration: 3-4 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Skills Required
• Knowledgeable of information technology security technical principles, Information Assurance methodologies and concepts
• IS auditing experience
• Working knowledge of Security Technical Implementation Guides (STIG)
• Knowledgeable of Operating System security requirements
• Understanding of configuration management principles
• Must be a team player, self-motivated, and a quick learner
• Hands on experience with IA tools
• SIPRNet management experience
•Bachelor's degree and 9-15 years' experience or Master's degree and 7-13 years experience

Description:
'LMS Information Systems Cyber Security team is looking for an assertive and self-confident Information Systems Security Officer (ISSO) to partner with the program and government customers to perform the duties as a Secret Internet Protocol Router Network (SIPRNet) ISSO located at the LM-SPACE Sunnyvale, CA campus. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

The ISSO will oversee day-to-day information system (IS) security operations including hardware and software implementations. The ISSO carries out technical administration of IS and gives direction to the system administrators in accordance with internal LM and customer security requirements, primarily using National Industrial Security Program Operating Manual (NISPOM) guidance as it pertains to SIPRNET and additional customer direction. Ability to work independently as well as in a teaming environment. Adaptable to diverse office situations, procedures and demands.
Job duties include:
- Develop, maintain, and update security documentation to include SSP, SCTM, Continuous Monitoring, POAMs, RAR, SAR, etc.
- Auditing of the IS, system administrators and program engineers
- Constant upkeep, monitoring, analysis, and response to network and security events.
- Documents compliance actions within the approved automated compliance tracking system or develops a plan of actions and milestones (POAM) maintained, and disposed of in accordance with internal security policies and practices outlined in the security plan.
- Ensures configuration management (CM) for security-relevant IS software, hardware, and firmware is maintained and documented in accordance with baseline.
- Ensures all information system security-related documentation is current and accessible to properly authorized individuals.
- Ensures records are maintained for workstations, software, servers, routers, firewalls, network switches, telephony equipment, etc. throughout the information system's life cycle.
- Evaluates proposed changes or additions to the information system, and advises the ISSM of their security relevance.
- Assist and conduct security IS education.
- Participates in internal/external security audits/inspections; performs risk assessments
- Leads investigations of computer security violations and incidents, reporting as necessary to ISSM
- Ensure proper protection and / or corrective measures have been taken when an incident or vulnerability has been discovered
- Develop, implement and enforce Information Security Policies and Procedures together with ISSM/FSO
- Develop and oversee Information Systems Security Plans / SSP (Certification/Accreditation) together with ISSM
 
Job Number: 8963
Job Location: Sunnyvale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3+ mos
Start Date: ASAP
Input Date: 04/19/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer – Level 2

Description:
Location: Moorestown, NJ
Rate: $80.00 - $90.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Exempt
Per Diem Split: Possible

****MUST BE A U.S. CITIZEN****
****MUST HAVE AN ACTIVE SECRET CLEARANCE OR TO HAVE HAD ONE WITHIN THE LAST 2 YEARS****


Job Description:
- The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
- This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
- This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
- This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
- This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
- The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.


Skill/Experience/Education
Mandatory:
****MUST HAVE AN ACTIVE SECRET CLEARANCE OR TO HAVE HAD ONE WITHIN THE LAST 2 YEARS****
- BS Degree in Electrical Engineering or Electrical and Computer Engineering.
- Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
- Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
- Configuration management and change management experience using ClearCase, ClearQuest and UCM.
 
Job Number: 9358
Job Location: Moorestown, NJ
Rate: $80.00 - $90.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 08/29/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
International eCommerce Build & Deploy Leader

Description:
We are seeking for an International eCommerce Built & Deploy Leader for a well-known company in WA, state. This position will be responsible for oversight and administration of the code base that supports SAP Hybris Solution. The position requires a candidate to develop, oversee and maintain the build/release system which is comprised of branching, scripting, build configurations and compiled code deployments.

This includes build automations, auditing Web Server Configuration in non-production and production
environments. In addition, the Build Master will also spend time in development activities which includes enhancements and updates to the source code to get it streamlined and compatible for build automation, manual and automated deployments, troubleshooting and fixing issues in the source code for any build/release errors and compatibility issues.

Candidates must have hands on experience with build and release automated and manual processes for application deployment.

RESPONSIBILITIES

Responsible for architecting, maintaining, and streamlining the automated build and release process from code compilation, build definitions, to deploying releases to multiple environments
Technical Expertise in troubleshooting techniques for source code compilation issues, automated build packages errors and deployment issues
Responsible for deployment quality and solving post-build issues
Coordinate & maintain source control branches and versioning of software branches such as master, develop, release and feature branches.
Perform integrations with merge conflicts
Have an in-depth understanding of the hosted server environments, the various applications deployed, the systems, the platforms supporting those and the 3rd party operational tools
Facilitating and championing the quick resolution of problems found during any build and deployment efforts to non-production or production
Creating and maintaining documentation of the build/release process by working with the Release manager
Investigating tools and processes and integrating them so that they can improve the reliability, stability and efficiency with which the build and release happens
Working closely with the development and Operations Support team to integrate new deployment processes and strategies to meet the new feature requirements
Work with the technical teams to automate build and deployment process through build system for all applicable applications and database scripts
Merge manual and automatic procedures into a single, highly-repeatable process
Design and configure continuous integration build system through collaboration with development and Operations Support teams
Working knowledge of Environment configuration management
Assist the Operations support Team with deployment responsibilities
Responsible for ensuring continuous maintenance of build servers which includes archiving of old packages, build retention policies, cleanups and other build agent configurations
Ability to do manual build and deployments whenever automation process do not work or it is still not yet ready for new applications
Ability to continually learn new techniques, research and bring in new technologies, process and techniques relevant to the work
Coordinate full and partial builds that may only include certain subsystems of the entire application
Work with the DevOps / Infrastructure team to assess, audit and maintain environments
Work with the project and release management to ensure targeted release dates are achieved
Create implementation and recovery plans for releases
Handle appropriate communication both prior to and following all releases with all technical / devops teams
Audit and Accountability Responsibility for Infrastructure(s) / Environment(s)
Atlassian Administration - Permissions Management (Confluence, JIRA, GIT, Stash, Bit Bucket, etc.)


REQUIREMENTS

Expertise in GIT based source code management and build definition setups
Good experience in creating build and release process documents
Expert in source code branching techniques and maintenance of those
Expertise in Release automation management tools for single and multiple environment deployments
Ability to troubleshoot and fix compilation issues in the source code when required
Must possess strong application support troubleshooting skills
Experience with Continuous Integration and Deployment using tools such as: Xebia Labs, Jenkins, Chef, Bamboo or any other CI system equivalent
Experience with build and scripting tools such as ANT / NAnt, Maven, Perl, and UNIX shell scripting
Python scripting, Perl scripting knowledge.
Candidate having brief sanity test experience (Load SW on HW and perform testing)
Experience administering a source code management tool such as Subversion or Git
Excellent interpersonal and diplomatic skills as well as a positive attitude.
Must possess excellent customer service, communication skills and time management skills
Organized and deadline driven with the ability to track multiple tasks simultaneously
Able to effectively set priorities and work well under deadlines with a strong attention to detail
Adapts well in a team oriented, professional, fast-paced, dynamic environment
Handle confidential and sensitive matters with tact and diplomacy
Independent working, ability to learn the updates and new technologies quickly and as well to work as a team member
Must be able to develop good working relationships with colleagues, internal clients and management as well as work as an effective and integral team member
Strong communication skills, both oral and written, including presentation skills
Demonstrated team-building skills with ability to influence and motivate team members that report to other groups in the organization
Extreme responsiveness with a strong sense of urgency
Able to flex to support the changing needs of a release
Adept at assessing issues with ability to devise workable solutions quickly responding appropriately
Proven ability to support and collaborate with multiple Project Managers within a Program
Flexible, must be able to change priorities quickly, focus on new ones without distraction, able to deal with conflict and work under pressure to meet deliverable dates / timelines
Must have experience in negotiating timelines and deliverables with a strong sense of urgency
Program / Project Management experience managing medium/large scale projects using traditional agile development methodologies
Proven experience in Agile / DevOps methodologies
Must possess strong process knowledge of System Development Life Cycles
Experience with executing project governance including change control and issue/risk management
Working knowledge of Project Management Tools (Confluence, JIRA, Microsoft Project, SmartSheets, etc.)
Must be able to adjust work hours to accommodate global teams
Ability and willingness to travel globally
24 x 7 x 365 operations - evening, weekend, and holiday work will be required Recommended skills, abilities, and certifications
Experience in eCommerce Solutions (specifically Hybris eCommerce Platforms)
Experience with projects focused on infrastructures and software solutions
2-5 years of retail business knowledge
Project Management certification and/or demonstrated core project management skills based on familiarity with the Project Management Body of Knowledge (PMBOK)
Proficient in the use of the Google products: email, spreadsheet, document, presentation, analytics
Knowledge of French, Spanish, Korean, Mandarin a plus
 
Job Location: Issaquah, WA
Input Date: 04/27/2018
Last Updated: 06/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
JAVA Software Engineer (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Rockwell Collins is currently seeking qualified candidates for a JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 3 years of hands on coding in Java using industry standard Object Oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Experience designing, configuring and developing complex system architectures using Virtual Machines (VMs), going beyond just setting up or doing application development on VMs

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents).

  • Understanding of Network Management fundamentals

  • Working knowledge of scripting languages such as Perl, bash, etc

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13943
Job Location: Richardson, TX
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Engineer - Military Platforms (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • Our expertise in flight deck avionics, cabin electronics, mission communications, information management, and simulation and training is strengthened by our global service and support network that spans 27 countries.

  • Working together, our global team of 20,000 employees shares a vision to create the most trusted source of communication and aviation electronics solutions, applying both insight and foresight to help our customers succeed. We are currently seeking qualified candidates for a Senior JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 5 years of hands on coding in Java using industry standard object oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Familiarity with virtual machine environments and their usage in complex system architectures

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Experience with setup/configuration of virtual machine environments (such as VmWare or equivalents)

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents)

  • Experience with Ethernet-based interfaces/protocols (IPv6 and SIP), serial interfaces, etc.

  • Understanding of Network Management fundamentals

  • Experience using SNMPv3 to monitor/control equipment

  • Working knowledge of scripting languages such as Perl, bash, etc.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14003
Job Location: Richardson, TX
Rate: 75-85
Per Diem: Yes, Split
Overtime: Some
Duration: 16 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Embedded Software Engineer

Description:
Lead Software Engineer

ENEA…an environment where you can innovate.

This is a Contract-To-Hire Opportunity located in Mesa, AZ.

The most successful candidate will have 7-10+ years of RECENT C/C++ Windows embedded development.

It is preferable that you have experience developing within FDA standard protocols & regulations but we may consider an individual who is otherwise qualified and has worked under strict or safety-critical embedded development. This person will need to understand not only the similarities of the standards but also the differences.

Essential Functions:

Full lifecycle software development, including design, implementation, test and qualification of embedded software for FDA Certified Medical Devices
Capture requirements to ensure code meets customer expectations
Identify, evaluate and implement tools and processes to continually improve the software development process
Conduct code reviews and apply best practices and coding standards

Required Skills/Qualifications/Competencies:

BS in Computer Science or related degree
7-10+ years of hands-on experience with C/C++ on a Windows platform
Object Oriented software development
Strong documentation experience
Ability to work with little direct supervision, independently or in small teams
Excellent organizational and documentation skills
Good verbal and written communication skills
Able to communicate effectively with remote team members
Strong self-motivation and initiative
Capable of working on both high and low level software
The versatility to contribute to upfront requirements, architectural design, implementation and integration with full documentation

Preferred Skills/Qualifications/Competencies

Medical device development experience
Debugging hardware using software
Manufacturing line control or test software
Experience with any of the following: Win32, MFC, Windows Embedded, USB development, LabVIEW.
We are an agile company where versatile brains thrive while working with exciting industries:

Avionics – Top-worldwide avionics manufacturers depend on us to build, test and certify systems to make the planes safe to fly.
Telecom– Leading global telecom operators trust us to build software platforms with extreme demands on high-availability and performance, accessed by billions of people daily.
Medical – Adding value to every phase of development process of patient care software and devices.
Consumer– Clients dream it, we make it…from development to market research to deployment.
OK, what else? Why Work here?

Work– Billions of people use our software daily – it’s in the telecom, avionics, medical systems and more…and we’re always doing fresh stuff and it’s great to be a part of it.
Rules– Rule #1 at ENEA is -– we are a company for creative, smart developers, who respect the passion for code. That’s it. That’s the rule.
Money– Yep, we pay well. Money is not the problem, find what you love and do it.
Humans– We are not a factory. We like to build robots but we are not robots here. In fact, we take pride in being free humans first, code lovers second.
Innovation – Open brains. This is an agile-built company, full of thriving brains hungry for more.
 
Job Number: 595
Job Location: Phoenix, AZ
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 07/10/2018
Last Updated: 07/24/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

Linguist

Description:
PDS Tech, Inc is seeking an  Linguist position located Seattle,WA.
 
Description:
We are looking for linguists to help develop the data infrastructure for Natural Language systems.
Our team is responsible for collecting language data, creating targeted labeling systems for a variety of downstream uses, writing clear guidelines for annotation, ensuring the quality of labeled data, and writing the software tools to process, evaluate, display, and distribute the data.

We need linguists who understand language as data, who think analytically and systematically, and who can develop and evaluate ways of capturing linguistic generalizations that are precise, concise, and implementable.
Candidates should understand the basics of computer programming, have at a minimum written code for processing text files, and be willing and able to learn new programming languages and techniques.

We value expertise in any sub-field of linguistics, expect a passion for the scientific study of language, and require research experience that includes an understanding of the scientific method and experimental design.
We are seeking new colleagues who work well on teams, can passionately argue a position without rancor, and quickly agree on the most optimal solutions to language data problems.

If you know that language data is the underpinning of all current language technologies, if you love practical language analysis as well as theoretical, and if you are ready to adapt your unique skill set to a diverse range of products and problems, then this may be the job for you!
 

General Responsibilities



  • Collaboratively develop complex and consistent linguistic analyses
  • Pilot new label sets to test their feasibility
  • Determine quality standards for annotation
  • Annotate language data with linguistic information and author clear guidelines so that others can do the same
  • Curate large amounts of annotated data by analyzing annotations, comparing annotations to guidelines, and building gold analyses


 



Specialized Roles



  • An Ontology Manager to create and revise hierarchical label sets for natural language based on the needs of the product team
  • A Tools Developer to create tools for data annotation, data storage, and quality evaluation with an eye towards the long-term
  • A Data Quality Engineer to monitor data collection, compile statistics, and ensure data quality
  • A Technical Writer to distill complex concepts and group consensus into accessible guidelines
  • A Grammar Developer to write regular expressions and Context-Free Grammars for data validation, named entity recognition, information extraction, etc.


 



 

 






Qualifications



 



  • Academic degree in Linguistics, Computational Linguistics, Language Technologies, or related field
  • Interest and experience in various areas of linguistics, including pragmatics, semantics, syntax, morphology, phonology, phonetics, discourse analysis, sociolinguistics, psycholinguistics, computational linguistics, and field work
  • Ability to formulate, articulate, and describe concepts and hypotheses that are broad enough to capture high-level concepts and specific enough to formalize as rules
  • Collaborative and solution-oriented attitude
  • Eagerness to learn new skills and adapt to a changing environment
  • Strong problem-solving and analytical skills
  • Enthusiasm for detail work and ability to focus for significant portions of the work day
  • Experience with basic programming techniques and familiarity with languages such as Python, PHP, Perl, and C#
  • Ability to speak and write in English fluently and idiomatically


Preferred Qualifications



 



  • Advanced degree and/or industry experience
  • Fluency in two or more natural languages
  • Familiarity with version control, unit tests, and other programming best practices


 


Education:

    • Advanced degree and/or industry experience


Languages:
English Read Write Speak

Attachments: 


p
p
spacer


p
ppcollapse Skills and Experience
pp
p

Skills:

Required



  • ARTICULATE
  • C++
  • EXPERIMENTAL DESIGN
  • FIELD WORK
  • PERL


Additional



  • PHP
  • PYTHON
  • STATISTICS
  • COLLECTION
  • DATA COLLECTION
  • DATA QUALITY
  • DATA VALIDATION
  • ENGINEER
  • FEASIBILITY
  • LINGUISTICS
  • NATURAL LANGUAGE PROCESSING
  • PROBLEM SOLVING
  • QUALITY ENGINEER
  • TECHNICAL WRITER
  • UNIT TESTS
  • USER EXPERIENCE
  • VERSION CONTROL




 
Job Number: 1810085872
Job Location: Seattle, WA
Duration: 19 months
Input Date: 05/16/2018
Last Updated: 11/13/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Bob Baba
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mS3fAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 09/12/2018
Last Updated: 10/01/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 with active secret CA

Description:
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2


Duties:

Additional Information: CANDIDATES NEEDED! Manager is active. Active Secret clearance required or active within last 2 years.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years **



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEERAEROSPACEACTIVE SECRET CLEARANCE

State/Province: California
City/Town: Canoga Park

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386
Job Location: Canoga Park, CA
Rate: 50-66/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 06/20/2018
Last Updated: 06/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required

ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: Mojave, CA
Rate: $65.00
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/13/2018
Last Updated: 09/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S6820283

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S6820283
6+ Month Contract

Pay rate : $50-60/hr W2

Job #S6820283 • Must have an active secret clearance with an investigation within the last 4.5 years (or 4 years 6 months)

Responsibilities include but are not limited to the following:
• Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system)
• Insure models and drawings meet all department standards and customer requirements.
• Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members.
• Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements.
• Work with internal customers to concept needed support equipment for new and existing programs.
• Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules.
• Review models, drawings and designs for manufacturability.
• Ability to effectively problem solve with a team.
• Support continuous improvement both personal and as a team.
Requirements:
• 4 year BS Design and Drafting or equivalent experience
• Working knowledge of GD&T.
• Knowledge of MS Office.
• Familiar with machine design and aircraft tooling.
• Ability to work in a team environment.
• Ability and willingness to work overtime as necessary is required.
• Experience with model checking for accuracy and model integrity.
• Experience with creating drawings.
• CATIA V5, TcUA, NX or other 3D modeling software a plus.
 
Job Number: S6820283
Job Location: Clearfield, UT
Rate: 60
Per Diem: split
Overtime: poss
Duration: 6+ Month
Start Date: ASAP
Input Date: 09/07/2018
Last Updated: 09/17/2018
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Our electronics manufacturing plant is looking for a mid level Manufacturing Engineer with at least 7 years of experience in CCA design for manufacture and fabrication.  Candidates should display the ability to work well within a team environment and foster positive working relationships with people from diverse job classifications and backgrounds.  The candidate should possess the flexibility to positively impact a wide variety of CCA processes in a fast paced manufacturing environment.

Engineering Processes:

Authoring electronic work instructions to comply with design requirements

Performing DFM reviews to include panel/PWB design  and applying knowledge of manufacturing design best practices

Driving efficiency and quality improvements in a high mix/low volume environment

Selecting and driving procurement of capital technologies to improve capabilities

Designing/procuring SMT solder stencils to support production needs

Analyzing quality trends and implementing corrective actions

Performing failure analysis to include root cause determination

Developing manufacturing controls to handle sensitive CCA materials

Determining and program appropriate reflow profiles for SMT boards

Setting up and structuring manufacturing Bills of Material (Oracle experience preferred)

Programming/Daily Processes:

Providing technical support to production to ensure that goals are met

Generating SMT programs for hands on operators to run (Siemens/Siplace experience preferred)

Programming solder paste application/inspection equipment

AOI programming for automated inspection (Yes Tech experience preferred)

Selective solder programming (Juki experience preferred)

Programming x-ray for automated inspection (GE experience preferred)


Other Duties:

Support a production team and help to implement process improvements

All other duties as assigned

Position Requirements Candidate should possess a Bachelors Degree in an Engineering discipline preferably Manufacturing with a minimim of 7 years applicable experience.

Candidate should also possess;

Proficiency and experience with Valor DFM software is a big plus

Experience with manufacturing under government contracts is preferred

Experience in high mix, low volume operations is preferred

Candidates should possess a strong technical knowledge and the ability to effectively communicate with all levels of the organization

Knowledge of the Microsoft Office Suite of products and general computer proficiency is required

Candidates must demonstrate effective verbal and written communication

Experience with Lean manufacturing concepts (LSS GB, BB, ETC)

Be able to obtain a security clearance
 
Job Number: 42343
Job Location: Tallahassee, FL
Rate: Open
Per Diem: Yes
Input Date: 06/04/2018
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 1-Electrical/Electronics

Description:
Manufacturing Engineer 1