Job Search Results

686 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:08AM Pacific Time by ContractJobHunter. )

Listings 1 - 686

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AVIONICS SYSTEMS ENGINEER

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

AVIONICS SYSTEMS ENGINEER
To work on a 6-9 month contract in Gig Harbor, WA
Responsibilities:
• Write requirements for the Systems Requirement Document (SYRD) and Mechanical Engineering Requirements Document (MERD).
• Write and execute tests (SBC based) for performing operational and functional tests and outputting pass/fail/data.
• Use of DOORS for requirements tracking and tracing.
• Produce FAA certification reports
• Participate in FAA Systems and Software (SR and SOI) reviews

Experience Requirements:
• Superior technical communication and writing skills with experience using requirement management tools, such as DOORS, Reqtify or equivalent.
• Bachelor’s degree in Engineering
• 7+ years of experience in requirements and/or testing.
• Embedded C/C++ Proficiency
• Individual must have a passion for aviation hardware and thrive in a fast paced environment
• Pilot background familiar with autopilots and other avionics for rotorcraft and fixed wing desired.
• FAA flight test engineering and data processing/analysis experience desired
• Hardware, Altium, DO-178B/C, ARP4754A, ARM Processor, I2C, RS-232/485, ARINC 429 familiarity desired.
 
Job Number: WW040718SYSHEL
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9 MONTHS
Start Date: April 23, 2018
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Aeronautical Engineer
Lexington, KY
6 month contract


Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. Responsibilities include: •Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn •The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations •You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education

Mandatory:

•Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs •Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position

Desired:

•Experience with Microsoft Office Suite (Word, Excel, PowerPoint) •Demonstrated previous success working in a team based
 
Job Number: 53713
Job Location: Lexington, KY
Rate: $65
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Possible
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
- Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- 5+ years of stress analysis experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree.
- Considered career, or journey, level position

Desired:
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 8859
Job Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret CA

Description:
Requirement# AERO-REQ-0775
Work Location Palmdale, CA
Work Week 9/80
Needed Date 03/28/2017
End Date 12/28/2017
Number of Resources 1
Security Clearance Secret (Prime Contract:P - 16, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Title Aeronautical Engineer

Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required. Candidate must possess an active SECRET clearance with 5 year re-investigation. Candidate must have significant Flight Controls and Flight Simulation experience.

Skill/Experience/Education
Mandatory:

Active SECRET Clearance with Background Investigation in last 5 years. Significant work experience with Flight Controls and Flight Simulation
Desired:

Bachelors Degree or above in an Engineering or Related field.


Interview Required Yes

Shift 1st Shift

OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0775
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Systems Engineers - Wichita, KS

Description:
STS AeroStaff Services is hiring Aerospace Mechanical Systems Engineers in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Research existing technologies related to ABOS
• Develop familiarization with the T-6 On Board Oxygen Generation System (OBOGS)
• Potentially support build of prototypes of systems components for testing; set up and run laboratory simulations
• Create presentations to convey trade study recommendations
• Clearly communicate and coordinate with engineering technical sections, program management, and the T-6 system’s program office

Qualifications:

• Bachelor’s Degree in Mechanical Engineering, Aerospace Engineering, or related technical degree
• Background in Oxygen and/or Environmental Control Systems is desirable
• Working knowledge of FAA and/or Military processes and procedures to support system qualification is beneficial
• Experience in CATIA V5 is beneficial
• Professional and diplomatic demeanor
• Excellent written and verbal communication skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42045
Job Location: Wichita, KS
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Engineers - Melbourne, FL

Description:
STS AeroStaff Services is hiring Aircraft Structural Engineers in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program
• Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives
• The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization
• Tools utilized may include FEMAP, NX, and other software applications

Basic Qualifications:

• 9 Years’ with Bachelors in Science; 7 Years’ with Masters; 4 Years’ with PhD
• Secret Clearance required

Preferred Qualifications:

• Knowledge of FEMAP and NX CAE
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42107
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly & Warehouse Associate

Description:
From the Hiring Manager:

~ Looking for someone with a mechanical aptitude who’s interested in gaining experience within the Manufacturing / Production Industry.
~ Looking for a highly motivated individual who’s able to get a task and drive it to completion.
~ Someone with either aviation or automotive parts painting experience would be ideal but not necessary

Summary

The Assembly and Warehouse Associate person will split their time between Mechanical Assembly and Inventory Control (Warehouse Clerk). This position will require a person with a diversified skill set who is flexible and able to prioritize workloads in a rapidly changing manufacturing environment. A typical day can vary greatly and the person can be asked to do assembly work in the production area or inventory control duties in the warehouse / inventory cage.

Duties / Responsibilities:

> The assembly work would entail entry level skills with an aptitude for mechanical assembly.
> Connect / complete small wiring terminations as needed during mechanical assembly
> The warehouse duties would involve inventory control by part allocation to work orders and the stocking of newly received inventory.
> Perform cycle counts and assist with shipping & receiving duties
> Complete production and/or quality related documentation
> The split of these duties will depend on the day-to-day needs in each area but will typically be 50% Mechanical Assembly and 50% Inventory Control.
> Keep work area clean and organized as to present a professional work environment

Job Requirements / Experience:

> 3+ years of production / manufacturing experience or Inventory Control experience
> High School Diploma and U.S. Citizenship is a MUST
> Experience with hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)
> Forklift experience
> Working knowledge of SAP preferred
> Able to read and interpret instructions, directions, engineering drawings and schematics
> Must be able to lift up to 50 lbs repeatedly
> Able / willing to work with large vehicle & equipment that will require climbing / crawling around, on and under.
 
Job Number: 021_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Design Engineer

Description:
Project Overview:
Our global deployment of custom-designed machines has created one of the largest and most powerful computing infrastructures in existence: cutting-edge innovation on a huge scale. Our Technical Infrastructure teams design, build, and operate the software, hardware, computing platform, and networking technologies that power all of Google's services. As our operations continue to grow, its becoming ever more important to automated our infrastructure for deploying and operating at scale. We have developed a portfolio of automation projects that span manufacturing, supply chain, and datacenter operations.
We are looking for motivated professionals with experience designing complex automated systems in CAD. From component level detail to factory layout and optimization.
Overall Responsibilities:
You will work with our Datacenter Automation Systems team to define product specifications for robotics, autonomous vehicles, and material handling systems. Convert those specifications to virtual models in Solidworks, Autodesk, or ProE computer aided design software. Generate design details and schematic drawings from the virtual models for contracting from our supply base. Test and measure components and systems to ensure they meet design standards.
Top 3 Daily Responsibilities:
• Work with senior engineering staff to define product specifications,
• Use CAD software such as AutoCad,Inventor, Solidworks, or ProE to design building scale automation systems, components, robotic work cells
• Document design details and make schematic drawings for contracting components from suppliers.
Required Skills:
• B.S. ideally in Mechanical Engineering (or equivalent) or minimum 10+ years professional experience in CAD Design
• Without a degree, ideal candidate would be with trade certification in certified Solidworks professional (CSWP) or expert (CSWE)
• Solidworks, Autocad, Creo/ProE computer aided design systems
• Layout planning and optimization
• Geometric Dimensioning and Tolerancing
Nice to have skills/Not Required:
• Minimum 2+ years developing robotic, mechatronic, or material handling systems in a field related to manufacturing or logistics
• Certification: CSWA, CSWP, CSWE, CPPA, ACP
• Controls systems
• Statistical modeling
• Understanding Robot kinematics and Work Envelope
• Material control dynamics and principles
• Rate and systems throughput modeling
 
Job Number: 385909
Job Location: Kirkland, WA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer - Level 3

Description:
Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Duration: 6 month contract
Shift: Regular 40 Hour Work Week – OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Creo design experience is required **
** GD&T experience is required (geometric dimensioning and tolerancing per ASME Y14.5) **
** PLM system experience is required. Windchill strongly preferred **

- Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
- Applicant must have prior turbomachinery design or development experience.


Requirements:
- Proficient experience using CREO 2.0 CAD System
- Experienced user of Windchill PLM System or similar
- Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
- Excellent experience in the creation of mechanical engineering drawings
- 9+ Years of related Aerospace Industry experience


Skills:
- Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and proficient use of Windchill PLM System.
- Advanced surfacing and modeling skills preferred.
- Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M.
- Ability to create mechanical engineering drawings, and related specifications.
- Ability to write clearly and concisely.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Knowledge of design practices, manufacturing techniques and inspection requirements.
- May require the use of various computer systems to produce data, analysis and reports.


Education:
- Bachelor’s or Master’s degree in an appropriate engineering discipline.
- Rocket propulsion design experience preferred.
 
Job Number: 8775
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer - Level 3 AL

Description:
161674/7807767
Job Title: CREO Design Engineer - Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Creo design experience is required **



** GD&T experience is required (geometric dimensioning and tolerancing per ASME Y14.5) **



** PLM system experience is required. Windchill strongly preferred **



Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
Applicant must have prior turbomachinery design or development experience.




Requirements:

Proficient experience using CREO 2.0 CAD System
Experienced user of Windchill PLM System or similar
Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
Excellent experience in the creation of mechanical engineering drawings
9+ Years of related Aerospace Industry experience




Skills:
Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and profecient use of Windchill PLM System.
Advanced surfacing and modeling skills preferred.
Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M.
Ability to create mechanical engineering drawings, and related specifications.
Ability to write clearly and concisely.
Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
Knowledge of design practices, manufacturing techniques and inspection requirements.
May require the use of various computer systems to produce data, analysis and reports.






Education:
Bachelor’s or Master’s degree in an appropriate engineering discipline.
Rocket propulsion design experience preferred.

Skills:
Required
CREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGAEROSPACE DESIGN
Additional
PDM/WINDCHILL

State/Province: Alabama
City/Town: Huntsville

Start Date: 04/09/2018 Hours Per Week: 40.00
Est. End Date: 10/07/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7807767
Job Location: Huntsville, AL
Rate: 60/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Harness Designer/ CREO

Description:
Job Title: Cable Harness Designer/ CREO
Location: Tucson, AZ
Duration: On-going/ long term contract
Pay Rate: $70 to $80/ hour (DOE)
Please Note: Candidate must be able to obtain DoD Secret Clearance upon offer (or already have an active Secret Clearance)

Description:
Cable/Harness Designer Senior level position in the Mechanical Subsystem Directorate, Mechanical Design Integrity Department.

Assignments will be received in task and objective oriented terms.

Conducts briefings and participates in technical meetings for internal and external representatives.

Foster effective communication between teams and team members.

Work is performed without appreciable direction either individually, in a team environment, or in a supervisory capacity to develop major wire harness and/or flex harness components or develop improvements to a product to facilitate manufacturing operations.

Uses Computer Assisted Design (CAD) systems to prepare electro/mechanical design layouts, electrical diagrams, detail and assembly drawings and models, and related documentation in conformance to appropriate program and/or military specifications.

Responsible for identification & execution of the program requirements and ensuring the quality of Model Data Sets and associated Drawings are delivered with program cost and schedule constraints.

Provide interpretation and implementation of ASME Y14 Standards and drafting standards.

Support the definition of all drawings necessary to describe the product for full design disclosure in order to comply with the requirements for a Product Level Technical Data Package.

Become actively involved in daily operations when required to meet schedules or to resolve complex problems.

Collaborate with the engineering and program personnel on staffing requirements and subsequent assessment of individuals performances.

Conduct timely employee performance development discussions and plans for employees growth.



Required Skills:
5 years or more of Cable routing experience with a combination of Pro-Engineer/CREO Cable Module, Pro-Diagram, CREO Schematic or RSD

SME with mechanical design experience that may include areas such as electrical/mechanical packaging, harnessing, cabling, electrical schematic/diagrams, structures, surfacing, and mechanisms.

SME background in manufacturing methods/processes of harness design such as IPC-620

SME user of CREO or Pro/Engineer Cabling Module, Pro/Diagram, CREO Schematic, and Sheet Metal Module.

Candidate must have complete understanding of basic principles, theories and concepts for creation and preparation of engineering design documentation.

Candidate must have a full knowledge of industry practices and standards used in drafting, modeling and design development/revision.

Candidate must be able to identify and correct design, model, or drawing errors/omissions/deficiencies and recommend corrective actions or improvements.

Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design concepts, and many other high level tasks.

Technical knowledge using documentation specifications such as MIL-STD-31000, ASME Y14.5M, ASME Y14.24 and ASME Y14.100.

Must have the ability to apply Geometric Dimensioning and Tolerancing (GD&T).

Expert user of CREO or Pro/Engineer solid modeling tool and considerable knowledge of Windchill PDM.

Effective oral and written communication skills / good communicator

Ability to work effectively in a team environment or independently

Self-starter

Demonstrate leadership skills

This position requires the eligibility to obtain a security clearance.

Non-US citizens may not be eligible to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. Security clearance factors include, but are not limited to, allegiance to the US, foreign influence, foreign preference, criminal conduct, security violations and drug involvement. Employment is contingent on other factors, including, but not limited to, background checks and drug screens.



Desired Skills:

Experience with Microsoft Word, Excel and PowerPoint.

Knowledge of Company Drafting Standards, Mechanical Engineering Process for documentation preparation.

Working knowledge of RMS processes and procedures

Existing Secret Clearance Preferred.
 
Job Number: 385932
Job Location: Tucson, AZ
Rate: $70 to $80 DOE
Per Diem: No
Overtime: Yes
Duration: On-going/ Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer

Description:
Seeking a motivated civil engineer. The primary task of this role will be to coordinate all phases of infrastructure construction projects. Knowledge of the design life cycle process from requirements definition, permitting, project construction, and project sign-off is a plus.

• Supports review of infrastructure plans and procedures to ensure compliance with federal, state, and municipal requirements & regulations
• Supports the creation of project buy-off requirements
• Acts as general contractor for various infrastructure projects
• Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate project completion


Requirements
• B.S. degree in civil engineering or mechanical engineering is required
• Current professional engineering license in the State of California or other state with reciprocity
• Working knowledge of California commercial building codes and ordinances
• At least 5 years of relevant industry experience
• Experience with AutoCAD or SolidWorks design software is preferred
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
• Strong team player and ability to work independently with excellent organizational and problem-solving skills

The Structures Company is an AA/EOE.
 
Job Number: 190
Job Location: CA
Per Diem: yes
Overtime: possible
Duration: 5-7 Months - Possibly Longer
Start Date: April
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3

Description:
Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.

Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.
40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.
10%: Test support for combustion devices components
20%: Supplier integration with external vendors
20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Experience working an equivalent engineering design/development environment is desired.
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering
-Ability to read and interpret blueprints, technical drawings and specifications
-Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.


Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).
 
Job Number: 8727
Job Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3 FL

Description:
161797/7804089
Job Title: Component Product Engineer (Project Engineer) - Level 2 / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.



Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.



40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.



10%: Test support for combustion devices components



20%: Supplier integration with external vendors



20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with liquid rocket propulsion systems desired.

-Experience working an equivalent engineering design/development environment is desired.





-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering

-Ability to read and interpret blueprints, technical drawings and specifications

-Ability to communicate clearly and concisely;May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.



Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).

Skills:
Required
PROJECT ENGINEERAEROSPACE

State/Province: Florida
City/Town: Jupiter

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7804089
Job Location: Jupiter, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters

Description:
Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Duration: 6 month contract
Shift: 9/80 Schedule, OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
- The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The candidate will also be a key resource in the design, development and testing of new electric propulsion products.
- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.


Skills:
Required:
- 2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
- Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).

Desired:
- Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
- Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
- Candidates should have strong technical writing and presentation skills, and should have experience working in teams.

Education:
- A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
- A Master's degree or higher in an engineering discipline or physics is preferred.
 
Job Number: 8872
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters ** Candidates must have Electric Propulsion or Plasma Physics education or experience ** WA

Description:
161793/8205016
Job Title: Component Product Engineer II (Project Engineer) – Electric Thrusters

Number of Positions: 1

Remaining Positions: 1

Additional Information: More resumes needed! Candidates must have Electric Propulsion or Plasma Physics education or experience.

** Candidates must have Electric Propulsion or Plasma Physics education or experience **


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
The candidate will also be a key resource in the design, development and testing of new electric propulsion products.

Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.
Skills:
Required:

2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).
Desired:

Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
Candidates should have strong technical writing and presentation skills, and should have experience working in teams.
Education:
A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
A Master's degree or higher in an engineering discipline or physics is preferred.

Skills:
Required
PROJECT ENGINEERAEROSPACE ELECTRICAL

State/Province: Washington
City/Town: Redmond

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-8205016
Job Location: Redmond, WA
Rate: 53/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators

Description:
Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift – Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Component Product Engineers are also known as Project Engineers **
** Bachelors degree required **

25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget
20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.
-MSME/AE degree is highly desirable.
 
Job Number: 8664
Job Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the SpaceShipTwo pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes.
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)

Educational Requirements
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering

· 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
· Proficient with CATIA V5
· Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
· Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
· Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
· Experience designing for aerospace environments desired
· Experience in the development of human spaceflight hardware desired
· Experience with Product Lifecycle Management (PLM) software and configuration management processes
· Excellent analytical and decision-making skills
· Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.

· Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

Required Skills:
Microsoft Office, CATIA, Structural design of primary and secondary composite aircraft structure.

The Structures Company is an AA/EOE.
 
Job Number: 73
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV

Description:
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** ** 10 years as a drawing and model checker for Aerospace mechanical hardware** ** Strong proficiency using GD&T per ASME Y14.5 ** ** 5-10 years Creo and Windchill PLM System ** Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships. 40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership. 30% - Performs design calculations to validate any phase of design requirements. 20% - Estimation of resources and schedule required to complete a design activity and training to staff. 10% - Provide technical guidance to less senior CAD designers and to design support personnel. Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered). -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required. -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5). -ASME Certification in GD&T is a plus. -Ability to read and interpret product definition and related specifications. -Electronic markup tools and the ability to work paperless is required. Education: -Requires a Bachelors degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 385801
Job Location: Canoga Park, CA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Location: Rancho Cordova, CA
Rate: $40.00 - $60.00/HR (DOE)
Duration: 6 month contract
Shift: 9/80 schedule. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo & GD&T. Windchill experience strongly preferred **
** Bachelors degree is required **
Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent. MS degree is desired.
-10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems.
-Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.
 
Job Number: 8713
Job Location: Rancho Cordova, CA
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4 CREO Windchill CA

Description:
161673/7703310
Job Title: Design Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** Candidates must have significant experience with Creo & GD&T. Windchill experience strongly preferred **



** Bachelors degree is required **



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



• Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.

• Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.

• Applies theories of heat and energy transfer to create practical solutions to technical problems

• Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

• Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.



• Windchill experience strongly preferred.

• Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

• Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

• Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

• Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

• Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent. MS degree is desired.



-10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems.



-Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.


Skills:
Required
CREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGAEROSPACE DESIGN
Additional
WINDCHILL


State/Province: California
City/Town: Rancho Cordova

Start Date: 03/19/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-7703310
Job Location: Rancho Cordova, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
- BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 8574
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 / Bachelors degree is REQUIRED / GD&T / 10 years Design Engineer in rocket propulsion hardware and 10 years Designer using ProE / Creo URGENT CA

Description:
161251/7561968
(8122965)

Job Title: Design Engineer - Level 4

Number of Positions: 3

UPDATE 3-5-18: Manager is requesting candidates with really strong GD&T (Geometric Dimensioning and Tolerencing) experience. Please provide summaries of GD&T experience on your resume.


Must have a Bachelors degree. It is a requirement for this group.


Duties:




** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:
BS degree in an Engineering field or equivalent field. MS degree is desired.

Skills:
Required
AEROSPACE DESIGNCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 02/12/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7561968
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 7 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital / FPGA Design Engineer CA

Description:
Request number: 5262
Date created: 03/28/2018
Job title: Digital/FPGA Design Engineer

Number of openings: 1

Position location: Torrance - CA
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: MS/MA

Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 50
Start Date: 04/02/2018
Tentative End Date: 06/30/2018

Job Description
Function: As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.


Required skills:
· US Citizenship required. No Dual Citizenship.
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: MB-5262
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Ridley Park

Description:
EE Technical Designer 3

Location: Ridley Park, PA
Duration: 1 year

Description:
Supports the EDI Wiring Process & Tools teams to instantiate the necessary improvements driving quality and efficiency across client. Coordinate design teams across client enabling commonality at all levels of design. Coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library.

Primary duties include:
Enter and update parts in library as appropriate
Enable commonality of EDI Design and Standards across client
Execute client Library change control board decisions (both for components and symbology)
Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
Coordinate and support reduction of the backlog of parts and symbol entry needed for each program deployment. Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
Coordinate the efforts of the distributed team of core librarians entering parts and symbols into the tool
Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
Provide guidance and query responses to core librarians
Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.
Works under general direction.

Baseline description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers.

Additional Experience Requirements:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. (HS diploma or GED Required plus degree requirements)

Skill Code:
623-Electrical Wire Design
 
Job Number: 18-05977
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 1 year
Start Date: 4/16/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer/Electrical Wire Designer III - (PA)

Description:
Supports the EDI Wiring Process & Tools teams to instantiate the necessary improvements driving quality and efficiency across BDS. Coordinate design teams across BDS enabling commonality at all levels of design. Coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library. Primary duties include:

Enter and update parts in library as appropriate
Enable commonality of EDI Design and Standards across BDS
Execute BDS Library change control board decisions (both for components and symbology)
Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
Coordinate and support reduction of the backlog of parts and symbol entry needed for each program deployment. Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
Coordinate the efforts of the distributed team of core librarians entering parts and symbols into the tool
Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
Provide guidance and query responses to core librarians
Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.

Works under general direction.

Baseline description: Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.


Additional Experience Requirements:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EETechDesPA
Job Location: Ri, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER III - ELECTRONIC DESIGN

Description:
Johnson Service Group is currently looking for an Electrical Design Engineer for a Temporary position with our Customer in Warrendale, PA. through 2018

The Electrical Design Engineer will be responsible for design, layout, testing, and evaluation of electrical and electromechanical devices and systems. They will work as part of a multi-disciplinary product development team to assess customer needs, generate and analyze concepts, create requirements and specifications, and perform formal risk assessments. They will design parts and sub-assemblies, participate in cross-functional design reviews, and support the transition of projects from development to manufacturing and field service. They will create schematics, wiring diagrams, system diagrams and PCB layouts as well as check drawings to ensure they meet specification and follow best industry practices. Most importantly, the EE exhibits the desire and ability to collaborate, and excels in teamwork and communication. Our Customer is all about continuous improvement, and this professional thrives in such an environment.



Essential Functions:

Responsible for the design, and analysis of complex level electrical systems, equipment and PCB assemblies.
Conduct feasibility studies of new and modified designs exercising judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria.
Work on complex multi-product level problems where analysis of situations or data requires an in-depth evaluation of various factors.
Direct support personnel in the preparation of prototype fabrication.
Participate in multi-disciplinary technical teams to research, develop, test and evaluate solutions.
Evaluate issues and failures to determine root cause and potential solutions
Work on intermediate level component and subassembly problems where analysis of situations or data requires an in-depth evaluation of various factors.
Collaborate with software, mechanical, testing and other cross functional teams to perform FMEAs and risk assessments.
Mentoring and coordination of other engineers.
Direct support of customers, to include travel to off-site locations as necessary to evaluate field issues.
Educational Requirements:

BS degree in Electrical Engineering or equivalent
Required Knowledge and Skills:

4+ years of Electrical Engineering experience
Experience the electrical and cross functional aspects of a formal product development environment including schematic capture, PCB development, Bill of Materials, MRP systems and associated tools (including Orcad or Altium).
Demonstrated experience designing electrical and robotic subassemblies and systems
Understanding of architectural design concepts of machine controls and I/O systems
Able to effectively solve problems, work independently on system level designs and multi-task as required.
Good interpersonal and communication skills
Self-starter, capable of working independently as well as building strong cross functional collaborative relationships.
Must be able to work in a team environment and assist cross functional teams with the debugging of complex issues.
The candidate must be highly motivated to work in a fast-paced environment.
Strong written and verbal communication skills.
Proficient with the Microsoft Office Suite of Products.
Must be legally authorized to work in United States
Preferred Knowledge and Skills:

Familiarity with PCB development including footprint generation and PCB layout a plus.
Familiarity with motion controllers, servo- and stepper- motors, and networked I/O systems a plus.
Experience with Product Lifecycle Management (PLM) tools and ECR, ECO processes.
Experience in LabView
Working experience with FDA regulated, ISO13485, or other highly regulated environments.
Work Conditions:

Office Environment
 
Job Number: 364448
Job Location: Warrendale, PA
Per Diem: Possible
Overtime: Possible
Duration: 12/2018 +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8769
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Systems Engineer

Description:
Embedded Systems Engineer needed to join development team.



Job Responsibilities

  • Aid in the development of the Vehicle Control Unit (VCU) and/or Electronic Control Unit (ECU);

  • Create/refine finite state machines, and implement controllers for vehicle systems in software;

  • Aid in the development of a system for distributed control of an engine, electric motors, and actuators over a CAN network;

  • Support the design of a wing fold interface system working with existing electromechanical actuators/sensors;

  • Support definition of the data interface specification (e.g. CAN, RS-485, etc.);

  • Integrate microcontroller software for CAN bus based actuation and sensing per DO-178 (potentially implemented via Simulink and Stateflow);

  • Address custom CAN messaging and VCU communications with hand coding as required;

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Coordinate and communicate effectively with other engineers, technical personnel, and management;

  • Support and participate in testing activities component, drive, and/or flight as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities and best practices, including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications


  • The candidate must have:

    • A Bachelor's degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 5+ years technical work experience, or;

    • A Master's degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 3+ years technical work experience.



  • Proven experience with robust software development cycles: taking software from concept through detailed development, executing code on targets, and testing to internal/external requirements;

  • Proven experience developing software for automobiles, particularly for vehicle control;

  • Experience with CAN messaging protocol;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Software Experience: C/C++.


Highly Desired Qualifications


  • Experience with software design, documentation, and testing per DO-178B/C;

  • Functional safety experience with ISO-26262 or IEC 61508;

  • Formal training or practical experience with software revision control techniques and tools;

  • Experience with ASTM F2245 or FMVSS;

  • Experience with LabVIEW or other real time data acquisition software;

  • Experience programming CPLDs or other logic devices;

  • Familiarity with modern electrical design layout tools such as Altium or Cadence products;

  • Knowledge or expertise in CAN Aerospace, CANopen, SAE J1939, ARINC-429 ARINC-825protocols;

  • Familiarity with Python or Perl;

  • Familiarity with Fortran.




 
Job Number: 18-13621
Job Location: Woburn, MA
Rate: 130000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Hong Lu
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Manager

Description:
Engineering Manager (Mechanical Systems) needed for an immediate full time opportunity with our client in the Burlington MA area. This position will manage a team of cross functional Mechanical Engineers. For further information and immediate consideration please apply below and call me today.



James St. Pierre - Branch Manager - Nesco Resource, LLC - 603.417.3001 - jstpierre@nescoresource.com



Key Responsibilities and Activities


  • Lead a team of mechanical engineers in the delivery of product and projects

  • Act as a liaison between your team and the Director of Mechanical Engineering

  • Work with program management to clearly outline alternatives, pros/cons, and risk mitigations to different projects

  • Implement engineering best practices and programs that motivate the engineering team to excel within the product development process

    • Ensure that these practices are in place and followed



  • Provide support to the engineering team, when needed

  • Provide technical advice on any problems, when appropriate

  • Maintain a positive work environment and address any safety concerns

  • Anticipate any upcoming obstacles and deadlines;

    • Ensure the team stays on task and is moving towards the goal




Required Skills and Experience


  • Bachelor's degree or higher in Mechanical Engineering or a related engineering discipline with 5+ years of experience

  • Minimum of 2 years supervisory experience

  • Excellent written and verbal communication skills, as well as presentation skills, including the ability to express ideas concisely and clearly cross-functionally and at all levels within the company


Desired Skills and Experience


  • Experience in low volume automotive environment

  • Experience in a manufacturing environment




 
Job Number: 18-13437
Job Location: Woburn, MA
Rate: 130000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-23 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: James St Pierre
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FEA Engineer

Description:
Job Title: FEA Engineer

This position is for an experienced Stress Engineer to support Gas Turbine product development through performing detailed stress analysis and validation of structural components and assemblies.

Essential Job Functions

- Finite Element Analysis of Turbomachinery components

- Transient Thermal Mechanical, Non-linear and Fatigue

- Present results in Design Review achieving release of desired component deliverables.

- Ability to complete projects independently with minimal oversight to achieve project deliverables.
Turbomachinery component knowledge especially Gas Turbine knowledge preferred

- Experience in using a variety of engineering tools like ANSYS, MATLAB, MathCAD, Excel, etc.

- Exceptional communication skills

- Organizational and time management skills

- Ability to work solitary and with global teams

- Manage deliverables



Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization. Some of these roles and opportunities include:



Execution within multiple services

Project Management: Execution and Support

Technical Leadership and Technical Reviews

Develop work instructions to ensure repeatability

Personnel Management

Onboarding and Professional Development: collaborate and mentor QuEST Team Members

Cross-functional teams

Geographic re-assignments

Account Management and Sales

Enabler roles, such as Human Resources, Technology Development, and IT

Quality Management and Continuous Improvement





Qualifications

BS/MS in Mechanical Engineering

Highly skilled in ANSYS and ANSYS Workbench

Proficiency in MS office (Word, Excel, PowerPoint and Outlook) required

Exposure to 3D CAD tools, Siemens NX preferred

Exposure to Gas Turbine components

Proficiency with office tools, MS Office, MS Excel, required
 
Job Number: FEA 01
Job Location: Charlotte, NC
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Fuel Systems Engineer
Fort Worth, TX

Our client is looking for a Systems Engineer specializing in Fuel Systems for a long term contract.

The ideal candidate will have experience:

Developing fuel system requirements and architecture, including fuel containment, fuel management, and aerial refueling

Conducting design and analysis of the fuel system and integrating the fuel system into the aircraft in coordination with interfacing systems

Managing supplier development and qualification efforts System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification

Education requirements:
•Bachelor of Science Degree in Mechanical Engineering (or closely related field) is required.
•Master of Science Degree is preferred.

Job Related Requirements:
•5+ years of experience
•Familiarity with model based systems engineering
•Familiarity with RTCA DO-160, MIL-STD-810, ADS-50, and military and industry standards for fuel system design
•Experience with creation of system specifications, requirements traceability, and verification. Preferred experience with Enovia and DOORS.
•Generation of System Safety Assessments, Failure Hazard Analysis, and Certification and Test plans.
•Experience with fuel system development and testing
•Experience with aircraft installation, functional testing, and troubleshooting
 
Job Number: 53376
Job Location: Fort Worth, TX
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Golf Cart Test Drivers - Augusta, GA

Description:
STS AeroStaff Services is hiring Golf Cart Test Drivers in Augusta, Georgia!

Job Summary:

The Test Technician/Driver is an entry level position within the Engineering Department with a primary responsibility of driving and evaluating Off Highway Performance Vehicles for the new product group. This position requires a hands-on individual with a mechanical aptitude capable of operating test vehicles, troubleshooting vehicle subsystems, repairing the vehicles as needed and writing detailed situational reports.

Essential Duties & Responsibilities:

• Follow written and verbal instruction to perform vehicle tests requested by the Engineering Department
• Provide detailed situational feedback to the Engineering Department
• Assist in determination and communicate performance improvements for or from design changes
• Inspect vehicle sub systems and components for proper operation and other wear, fatigue damage etc.
• Operate and evaluate test vehicles in a safe and controlled manner while providing written and verbal durability and performance feedback to Engineering
• Repair the vehicle when broken or damaged
• This includes replacing parts, fabricating, welding, writing work orders to have parts made etc.
• It also includes talking with the design engineering team and obtaining replacement parts to repair the vehicle and get it back to testing
• Complete all daily logs, paperwork and reports as requested
• Complete ROHVA E-Course
• Complete Safety and Red Cross First Aide training
• Safe operation of test vehicles is a condition of employment

Basic Qualifications:

• High School Diploma
• Some vocational training in engineering, auto repair, mechanical, electrical and computer areas preferred
• Previous off road vehicle testing experience a plus
• Valid Driver’s License
• Ability to pass DOT physical
• Ability to drive trucks with trailers

Preferred Qualifications:

• Strong verbal and written communication skills
• Able to photograph/video and report test incidents to a high degree of clarity and details
• Computer skilled and proficient with Microsoft applications such as, Windows, Word, Excel, and Outlook
• Analyze test data for proper function and reporting
• Provide feedback to possible design issues or changes needed for cost, performance and safety
• Willing to test at remote locations, for long period of time throughout North America
• Mechanical aptitude, repair skills and part fabrication for all portions of vehicle
• Off road experience with ride on mowers, ATVs, Side by Sides, Jeeps or 4 wheel drive trucks
• Self-starter, motivated to do projects with minimal supervision

What We Offer:

STS AeroStaff Services works with the largest names in the industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

If you would like to speak with a Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 41960
Job Location: Augusta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Product Design Engineers - Redondo Beach, CA

Description:
STS AeroStaff Services is hiring Ground Product Design Engineers in Redondo Beach, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Will support test set development for EPS-R
• Will create, modify and maintain drawings of electrical test equipment which includes, but not limited to custom test units, custom drawers and test cables
• Will be responsible for drawing documentation, design updates and working with mechanical and electrical engineer

Basic Qualifications:

• Minimum 5 years’ of experience working in industry
• Experienced in ProE/CREO
• Knowledge with electro-mechanical design/products
• Must be adept at working independently as well as in a collaborative team environment
• Must be able to communicate well verbally and written, and be attentive to detail

Preferred Qualifications:

• DOD/SCI Clearance
• AutoCAD experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42108
Job Location: Redondo Beach, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics and Landing Gear DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Current Mechanical Systems Hydraulic DER
• This position will need the following delegations on Chart C1, Systems and Equipment (Mechanical Equipment): B1, B2, B7, F1, F2, F7, G1, G2 and G7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-229
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector

Description:
Notes from the Hiring Manager:

<> The Inspector should have experience inspecting cables and mechanical parts within a manufacturing environment , preferably with a mechanical background instead of electrical
<> They will receive multiple parts, which will be a mixture of cables and mechanical parts but vary from day-to-day; they should be able to see the part and know how to proceed with inspection, or at least be able to read the engineering drawings.
<> Experience with inspection tools such as Calipers, Measuring Devices / Equipment, Tape Measure, Feeler Gauge, etc
<> IPC 610 or 620 Certification is a plus


Summary:

To perform checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.

Job Description:

> Performs audits, tests & inspections of materials, goods in process or finished goods within value stream (receiving through final system assembly) assuring quality first by determining compliance to drawings, procedures & specifications
> Applies established inspection procedures & uses simple inspection/testing tools and instruments of a “go/no go” nature.
> Develops and/or uses test and inspection set-ups utilizing mechanical and/or electrical test measurement equipment.
> Inspection methods and limits require good judgment and interpretation.
> Requires interpretation of inspection plans, tests and procedures.
> Recommends changes to procedures, processes, and drawings to improve efficiency and/or quality of the product.
> Identifies and documents nonconforming material in accordance with applicable procedures.
> Assists and trains others in assuring the proper test, measurement, and procedural operations.
> Ensure adherences to policies and procedures accordingly.
> Practices Total Quality principles and concepts.
> Acquire IPC-610/STD 001 and IPC-620 Certifications as applicable

Qualifications:

> 1-2 years related experience with a High School diploma preferred
> Knowledge of manufacturing and quality assurance processes and/or procedures.
> Knowledge of military and commercial quality specifications.
> Knowledge of Statistical Process Control.
> Knowledge of digital and analog circuitry.
> Knowledge of electrical and/or mechanical inspection.
> Knowledge of workmanship standards.
> Knowledge of packaging and preservation requirements.
> Understanding of Total Quality principles and concepts.
> Ability to communicate effectively verbally and in writing.
> Ability to use electrical and mechanical inspection equipment.
> Ability to develop and use simple to complex inspection set-ups.
> Basic algebraic skills.
> Ability to read, analyze and interpret detailed specifications, drawings, procedures, and schematics.
> Ability to work effectively within a team environment
 
Job Number: 024_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Engineer (OK)

Description:
Contract Instrument Engineer

Our Client in Ponca City, Oklahoma (Refinery) has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.

Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.

Description:
The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning.

The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel.

The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures.

The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and Client standards and practices to perform the above functions..

Responsibilities may include:
• Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.
• Identifying areas where instrumentation/controls can improve plant operation and profitability
• Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.
• Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects
• Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings
• Supporting criticality assessments of the plant's instrumentation equipment
• Designing Refinery Safety Instrumented Systems (SIS) design and maintenance
• Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems
• Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)
• Performing audits of instrumentation installations and process control loops including failure analysis inspections
• Interacting with engineering and construction contractors, both on-site and off-site
• Review instrument changes for Management of Change approval. Ensure that changes are properly designed and documented.
• Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.
• Support DCS operator interfaces with respect to information presentation and abnormal situation management.
• Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant’s instrumentation assets. Provide leadership for implementation of these reliability systems.

QUALIFICATIONS
Basic/Required: (Remember, anything listed in this section is a qualification the candidate MUST have in order to be considered.)
• Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics
• 3+ years of experience in a refinery and/or chemical industry
• 3+ years of direct experience in process instrumentation design and/or maintenance.

Preferred: (Candidates do NOT have to have all of the items listed in this section to be considered.)
• Knowledge of the Ponca City Refinery instrumentation asset base.
• Proficient in use of SAP - PM & PS Modules
• Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).
• Proficient in computer applications such as Word, Excel, Outlook, and MS Projects
• Expert knowledge of field instrumentation and controls through design and field installation experience
• Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Honeywell TDC3000 / Experion and FSC Safety Managers.
• Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.
• Demonstrated knowledge and use of SPI (InTools) database and specifications
• Strong analytical skills including statistical analysis
• Strong interpersonal and written communication skills
• Ability to lead execution of work and resolve issues in a team environment
• Accepts ownership, is accountable, and delivers on commitments
Ability to work in cross-functional teams

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-81018-2OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: 10/01/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Mechanical Design Engineer

Description:
Interior Mechanical Design Engineer

Location: Savannah, GA
Pay Rate: $50.40/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
-Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.

Education and Experience Requirements:
Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company
aircraft.

Principle Duties and Responsibilities/Essential Functions:
1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.

Send your resume to rex@inconen.com if qualified
 
Job Number: 8795
Job Location: Savannah, GA
Rate: 50.40
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer 3 / Ability to obtain Secret Clearance CA

Description:
1642
Logistics Engineer 3 (Job Number: 18006742)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: May 28, 2018

Target End Date: May 24, 2019

Pay Rate: $42/hr

Work Schedule: 9/80

Location: Redondo Beach, Ca

Duration of Assignment: 1 year

Clearance: Ability to obtain Secret


Responsible for the technical coordination, planning, execution, and management of NGAS-derived support and deliverables within the broader F-35 Maintenance, Repair, Overhaul and Upgrade (MRO&U) competency. Position involves significant collaboration with engineering, supply, operations, program office and customer stakeholders to conceptualize, develop, mature and brief/solicit government approvals of comprehensive retrofit projects. Develops corresponding Basis of Estimate documentation conveying technical scope and rationale for NGAS deliverables and labor projections. Support and review modification engineering, Time Compliance Technical Directive (TCTD) manuscripts and provide virtual support for associated verification events. Candidate may be required to routinely work extended hours and weekends to meet program objectives. Lead modification tools and tooling development activities and coordinate for related inspections, fielding and engineering support. Must possess excellent interpersonal, written and oral communication skills and experienced leveraging Microsoft Office suite applications. Position involves a wide range of influence and requires a resourceful, independent self-starter able to analyze and solve complex technical and logistical challenges involving solicitations of and commitments from various stakeholders.


Basic Qualifications:

• Bachelor of Science degree from an accredited college in Aerospace Engineering, Mechanical Engineering, or related field of study is required
• 5 years of experience related to aircraft modification, maintenance and related logistical operations.
• Prior aircraft tooling development, verification and utilization experience.
• Applicant must be proficient in Windows, MS Word, Excel, Access and Power Point
• Verbal, writing, presentation, and leadership skills are essential.
• Ability to obtain a Secret clearance
• US Citizenship

Preferred Qualifications

• Understanding of Project Management fundamentals
• Familiarity with F-35 air vehicles a plus
• Current Active Secret Clearance
 
Job Number: MB-1642
Job Location: Redondo Beach, CA
Rate: 42/hr max
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL PROJECT / STAFF ENGINEER

Description:
Johnson Service Group (JSG) is teamed with a leader in the aerospace and defense markets.

We are currently searching for a Mechanical Project/Staff Engineer to lead the design and analysis of Hydraulic Flight Controls Actuation Systems for Defense and Aerospace applications.

Scope of Experience and Responsibilities:

10 plus years as a Subject Matter Expert (SME), leading innovation and technical development for hydraulic actuation systems.
Will be responsible for the New Product Introduction design, analysis, development and test for 'Platform Technologies'.
Ability to effectively lead a project team environment and collaborate with customers.

Knowledge of FEA and the use of related analysis tools and methodologies, to perform hydraulic, stress and control theory analysis.
Collaborate with other senior leadership, and may direct engineers, as required.
Will execute Design for Manufacturability (DFM) practices, within a Lean, Six Sigma environment.

Contribute to product design proposals with internal stakeholders, to ensure that customer requirements and specifications, as well as manufacturing/cost implications and met.
Implement process improvements at a senior project level.
Ability to successfully drive projects through the Product Lifecycle (PLC).

Education:

Bachelor of Science degree in Engineering or equivalent discipline.
Master of Science degree in Engineering or equivalent discipline is a plus.

Start Date: Immediate

Duration: Direct Hire

Compensation: Highly competitive, including a highly competitive salary, lucrative bonus and comprehensive benefits.

Relocation: Relocation assistance may be available
 
Job Number: 364700
Job Location: Santa Clarita, CA
Rate: Open
Per Diem: No
Overtime: No
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 1

Description:
Please share updated resume at ravi@iconma.com if interested.

MP&P Engineer 1

Location: El Segundo, CA
Duration: 6 Months

Job Description:
Client Research & Technology is seeking an Entry-level Materials & Processes Contractor in El Segundo, California within the Materials and Processes (M&P) team supporting client Space and Missile Systems.

The desired candidate will work in a laboratory hands-on environment conducting analysis and test support in anomaly evaluations along with performing technical services on various client products to support design, production, application and maintenance of electrical, mechanical, and structural systems.

Responsibilities include but are not limited to:
- Use analytical problem-solving skills to resolve problems for company suppliers and provide technical support.
- Coordinate with other M&P team members to perform elements of an anomaly evaluation and material qualifications including developing test plans, executing laboratory tests, determining and performing evaluations independent to test plans or established procedures, and documenting results in a report.
- Work with various non-destructive and destructive testing.

Evaluation techniques may include:
- Visual inspection and microscopy,
- X-Ray fluorescence spectroscopy,
- Scanning electron microscopy with energy dispersive x-ray spectroscopy
- Material qualification and recertification
- Chemical analysis
- Proof of quality
- Optical properties analysis
- Contamination analysis
- Metallography/cross-sectional analysis
- Mechanical testing

- Perform receiving and recertification evaluations of adhesives, tapes, and mechanical parts
- Perform evaluations to test plans or established procedures, and documenting results in a report
- Develop research projects to resolve problems and improve manufacturing processes.
- Apply knowledge of material properties to develop, select, or recommend parts, materials and processes that meet the environmental and regulatory requirements for chemical, environmental, mechanical, and electrical systems.
- Utilize knowledge of chemical lab instrumentation, contamination control principles, environmental health and safety principles, and inorganic and organic chemical processing.

Preferred Skills/Experience:
- Previous laboratory experience
- Chemical Analysis experience
- Mechanical Testing Experience
- Excellent communication and project management skills
- Effective team collaboration skills

Skill Code: 6A8-Chemical/Contamination

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

Skills: Category Name Required Level
Soft Skills Communication Skills No Novice
Soft Skills Team Player No Novice
Technical Skills Chemical Tests No Novice
Technical Skills Communications No Novice
Technical Skills Mechanical Testing No Novice
Technical Skills Project Management No Novice
 
Job Number: 18-05326
Job Location: El Segundo,, CA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required



ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.


The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: CA
Rate: Up to $65.00-DOE
Duration: 9+ Month
Start Date: April
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-240
Job Location: Long Beach, CA
Rate: DOE but competitve
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Essential Job Functions:



· Coach/train less experienced engineers in Manufacturing Engineering.

· Monitor/improve the capabilities of the Manufacturing Engineers. Assist with projects/task when necessary.

· Technically review manufacturing engineering deliverables and help guide those on the technical career path.

· Provide manufacturing engineering solutions in the areas of process planning, and shop support activities.

· Drive internal and supply base activities related to Statistical Process Control, Capacity Assessment, First Article Review, Risk Assessments, PFMEA, and Gage R&R studies to meet QuEST’s customers’ quantity and schedule demands

· Provide engineering support to our customer’s (and their supplier’s) manufacturing/assembly organizations to troubleshoot and resolve technical problems.

· Participate in part valuation model creation and validation

· Drive improvements in all related manufacturing processes, including those related to products, equipment, and product quality for customers



Secondary Job Functions:

· Support project management and program management to quote and close work packages

· Develop work instructions and trainings to implement best practices / lessons learned and ensure repeatability

· Assist in interviewing and hiring new resources



Specialized Knowledge / Skills

· Experience with creating training material or work instructions desired

· Experience coaching entry-level engineers is preferred

· Experience with various manufacturing processes such as turning, 3-5 axis milling, grinding, broaching, special processes, and sheet metal/fabrications.

· Well versed in engineering & manufacturing drawings.

· Expert in interpreting GD&T standards (ASME Y 14.5).

· Knowledge in Measurements system analysis (MSA).

· Hands on experience in various machining, involving CNC and conventional methods and assembly techniques.

· Experience in the Solumina software.

· Familiarity with CMM and CAM offline/ Online programming.

· Knowledgeable in methods of inspection & Gauging concepts.

· Data collection and Analysis using QC tools and other SPC techniques (Control Chart, Control Plan, Design of Experiment, Gage R&R, KPCs, PFMEA, Process Capability Indices, Process Mapping)

· Experience/knowledge in APQP, PPAP, LEAN & 5S management

· Exposure to Aero/ Auto industry is preferred

· Familiar with aerospace/auto quality requirements (AS9100, OSHAS, TS 16949, various ISO)

· Familiar with NADCAP programs for Aero space (Civil & Defense) parts



Education, Training, and Experience

· BS/AS in Manufacturing, Mechanical, or Industrial Engineering

· Minimum hands on experience in Manufacturing Engineering 4+ years
 
Job Number: Man 01
Job Location: Lafayette, IN
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-234
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.


Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**An In-Person interview is REQUIRED. Candidates must be able to attend an in-person interview at their own expense**


Duties:
** Looking for a go getter with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 3 candidates will have up to 2 to 5 years of applicable experience **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8706
Job Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Duration: 6 month contract
Shift: 2nd Shift – 2:30 PM to 11:30 PM - Regular 40 hour week. OT possible.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
** This role will be working second shift. 2:42 PM to 11:30 PM **
** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 4 candidates will have 5 to 9 years of applicable experience **
** Candidates must be able to attend an in-person interview at their own expense **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8707
Job Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 3 CA

Description:
161431/7579579
Job Title: Manufacturing Engineer / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 3 candidates will have up to 2 to 5 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7579579
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 4 / 2nd shift CA

Description:
161466/7679383
Job Title: Manufacturing Engineer / Level 4

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** This role will be working second shift. 2:42 PM to 11:30 PM **



** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 4 candidates will have 5 to 9 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.


Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7679383
Job Location: Canoga Park, CA
Rate: 58/hr max
Per Diem: no
Duration: 6 months +
Start Date: ** This role will be working second shift. 2:42 PM to 11:30 PM **
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina, SAP, Smarteam, Catia V5

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8905
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract


Unique Skills:
Solumina and SAP experience preferred

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8642
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Knowledge and proficiency with a model/drawing data management tool, Windchill. A general understanding or experience with manufacturing engineering and fabrication processes. Familiarity with Microsoft Office Applications. An active DOD Secret Clearance (with background performed within 5-years) is a plus.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO3). Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 41941
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
An active DOD Secret Clearance is a plus.

Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 41695
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Active DoD secret clearance

Any familiarity with structure of C130 aircraft, specifically C130J

Air Force customer experience

Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards

Experience with Catia V5 3D parametric modeling and drafting

Perform detailed drawing checks and be responsible for completion of production ready drawings

Ability to work under little or no direct supervision

Demonstrated previous success working in a team based environment to meet objectives
 
Job Number: 41750
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Independence, OH
Rate: $48.25 - $60.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split


**MUST be a U.S. Citizen**

**MUST have Catia V5 Detailed modeling and FTA generation, layouts and checking experience**

**MUST have experience with Landing gear and or hydraulic actuators**

**MUST have a BS IN MECHANICAL ENGINEERING OR A BS IN AEROSPACE ENGINEERING**

Job Description:
Design project lead in research, design, and development of mechanical applications to the design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Design Lead Engineer will be responsible for developing complete Landing Gear layouts in response to customer requirements and design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program.


Requirements:
- BS IN MECHANICAL ENGINEERING OR A BS IN AEROSPACE ENGINEERING and 10+ years of experience and US Citizen status is required.
- Knowledge of PDM (Smarteam, MatrixOne, Team Center) systems, Catia V5, & MS programs (Word, Excel, Project, Power Point).
 
Job Number: 8462
Job Location: Independence, OH
Rate: $48.25 - $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad Becker
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Eglin AFB, FL
Rate: $35.00 - $55.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Description
CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY. This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- Experience with Catia V5 3D parametric modeling and drafting
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives
- Active DoD secret clearance

Desired:
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software
 
Job Number: 9636
Job Location: Crestview, FL
Rate: $35.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Orlando, FL

Description:
We are seeking an experienced Mechanical Design Engineer to go work in Orlando, Florida! Do you have the experience and education that will help you be successful in this position? Continue to read what will lead you to a great atmosphere and work environment!

The ideal candidate for this position will perform the following tasks:
* Mechanical Design Engineer to support a Development or Production Program effort.
* Perform conceptual and detail design of hardware system and subsystem components
* Create/release drawings
* Support design reviews
* Support supplier/customer meetings.
* Generation of Interface Control Drawings (ICD) and Instructional Engineering Release (IER) documents
* Creation of 3D solid models and 2D drawings and performance of tolerance analyses.
* Effort will require coordination of design(s) with other mechanical, technical, and cross functional disciplines, and familiarity with hardware integration and testing.
* Perform engineering liaison type tasks and will be required to have specific experience with Material Review Board (MRB) initiatives.
* Travel to the programs assembly and integration facilities in Ocala, FL or Troy, AL may be required.

Mandatory Qualifications and Experience:
* Bachelors of Science degree in Mechanical Engineering with a strong technical background, or 10 years of equivalent experience
* 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5.
* Must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T)
* Must be able to obtain a secret clearance
* Familiar with manufacturing, and manufacturing processes, and be capable of collaborating with other technical staff members within Engineering and other cross functional teams (Manufacturing, Quality, Procurement, DCMA, Customer) in order to salvage procured hardware and maintain hardware process flow
*Experience with the creation of 3D solid models, all types of 2D drawings, tolerance analysis, and hardware integration and testing

Desired Qualifications and Experience:
* Knowledge and proficiency with a model/drawing data management tool, Windchill.
* A general understanding or experience with manufacturing engineering and fabrication processes.
* Prior LMC employment / experience is a plus.

The ideal candidate for this position will possess the following skills and characteristics:
* Must be capable of incorporating Engineering Change Notices into existing drawings, and have familiarity with the concept of drawing revisions.
* Superior documentation skills are required
* Familiarity with Microsoft Office Applications.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127499
Job Location: Orlando, FL
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Engineer - Vehicle Braking Components

Description:
One of the world's leading heavy-truck manufacturers is looking for a Mechanical Engineer to join their team!

The Brakes Systems group works is a member of the Chassis and Powertrain Engineering department and works to develop and design wheel-ends, brakes, brake-related control systems, air distribution systems, air reservoirs, and the architecture that supports air and wiring harnesses across the vehicle chassis. The main function of a mechanical engineer is to research and investigate the design, functionality and maintenance of mechanical products, equipment, systems and processes. A typical mechanical engineer has the ability to make engineering drawings, and read and interpret blueprints.


Essential Duties and Responsibilities:

Design and detail vehicle components and systems.
Interface with Engineering Analysis personnel to determine the most effective and economic materials to be used in product systems and components.
Interface with Test & Development personnel to identify and analyze problems encountered in prototype development and testing.
Provide creative technically feasible solutions.
Interface and coordinate with Purchasing, Vendors, Manufacturing, and other Engineering personnel in the bills of materials, value analysis and testing phases of product development.
Evaluate state of the art developments in the vehicle industry and apply the latest advances.
Apply statistical and engineering techniques in designing and testing.
Use programming and modeling techniques in conjunction with mathematical analysis.
Interface with Product Regulation and Compliance personnel to design vehicles that meet government regulations, restrictions, and codes.

Qualifications:

MS degree or BS degree in mechanical engineering, or commensurate work experience.
0-2 years of experience in product engineering design areas required.
CAD experience required. NX experience preferred.
Creativity, verbal and written communication skills, analytical and problem solving ability.
Team player and detail oriented.
Knowledge of pneumatic systems, including air compressors, air dryers, and pneumatic tubing and fittings preferred.
Experience with manufacturing processes, MRP systems, and coding for design solutions (VBA, MatLab, etc) preferred.
Knowledge of vehicle brake systems for commercial vehicles - primarily air brakes – and related regulatory requirements preferred.
 
Job Number: 4752
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 24 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designers - Refinery Experience (OK)

Description:
Mechanical Designer:
Looking for two mechanical designers. These designers would need to have 5 to 10 years of experience.

Primary Functions/Responsibilities:

Safety:
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, accountable, and will deliver on all commitments

Responsibility:
Provide design and drafting expertise to develop, mechanical detail design packages for projects

Provide quality design packages that satisfy the Refinery Standards and Guidelines

Must be able to create a design schedule and complete projects in a timely manner

Strong project and CAD experience; (MicroStation experience a plus)

Must be able to gather field data and measurements
Must be able to climb stairs and ladders
Strong team player
Candidate will review and check vendor drawings

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-51184OKPCR
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Yes, as needed
Duration: 11 Months or longer
Start Date: 5/14/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer needed for an immediate full-time opportunity with our client in the Burlington MA area. 



Job Summary 

We are currently looking for a world-class Mechanical Engineer (Mechanisms) to join our development team. Candidates should be self-starters who bring positive attitude, integrity, and enthusiasm to our team as we transform personal transportation.



Job Responsibilities 

  • Design, analysis, and system integration of the throttle and gear selection controls, including:

  • Combining mechanical and throttle-by-wire engine control mechanisms;

  • Developing the gear selection mechanism to interface with the hybrid powertrain;

  • Defining mechanism degrees of freedom, latching states, and sensor interfaces;

  • Supporting sensor selection/integration for sensing commanded vehicle state;

  • Material selection and mechanism designs for durability, low weight, and simplicity;

  • Integration of the throttle and gear selection mechanisms with operator ergonomics.

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD&T;

  • Perform analyses, via hand calculations, kinematic simulations, and FEA, to validate designs;

  • Support and participate in testing activities – component, drive, and/or flight – as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications:


  • Bachelor’s degree in Mechanical or Aerospace Engineering and 5+ years technical work experience, or;

  • Master’s degree in Mechanical or Aerospace Engineering and 3+ years technical work experience.

  • Advanced SolidWorks experience – including SolidWorks Motion tool;

  • Demonstrated experience designing robust, lightweight mechanisms for vehicles including operator controls;

  • Expertise performing static and kinematic analyses for mechanical systems;

  • Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

  • Proven definition or production of manufacturing drawings including selection of dimension tolerances;

  • Familiarity with material selection to meet strength, weight, durability, and cost targets;

  • Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Familiarity with basic shop tools (hand, power, mill, lathe, etc.).


Highly Desired Qualifications


  • Hands-on experience installing automotive/aircraft throttle mechanisms, gear selectors, or propeller controls;

  • Proven ability to select appropriate bearing types/sizes, implement latches, and design linkages;

  • Familiarity integrating Hall Effect sensors, proximity, or contact switches to sense mechanism state (position);

  • Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD&T);

  • Background in designing with aerospace grade materials including fiber reinforced composites;

  • Exposure to ANSYS Workbench, FEMAP/NASTRAN, or any similar sophistication FEA software;

  • Familiarity with MSC Adams or similar sophistication rigid-body kinematics simulation software;

  • Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

  • Familiarity with 49 CFR 571 regulations;

  • Familiarity with ASTM F2245 regulations.



 
Job Number: 18-13347
Job Location: Burlington, MA
Rate: 105000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer (Rotating Machinery) to join our development team. . As a key contributor, you will work within the Drivetrain group to design, analyze, and participate in system integration activities for the products road-mode drivetrain.



Job Responsibilities:



• Design, analysis, and system integration activities for flight-mode drivetrain, including:

• Mechanical loads definition;

• Engine-to-propeller power transmission;

• Engine-Generator mechanical coupling;

• Material selection for durability and low weight;

• Propshaft, couplings, and shaft-driven rotating accessories;

• Integration of the flight-mode drivetrain with the airframe structure.

• Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

• Coordinate and communicate effectively with other engineers, technical personnel, management, and external suppliers;

• Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD

• Perform analyses, via hand calculations and FEA, to validate designs;

• Support and participate in testing activities as needed, including test plan creation, data analysis, and test report generation and documentation;

• Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.





Qualifications:



• The candidate must have:

• A Bachelor's degree in Mechanical, Automotive, or Aerospace Engineering and 5+ years technical work experience, or;

• Master's degree in Mechanical, Automotive, or Aerospace Engineering and 3+ years technical work experience.

• Advanced SolidWorks experience; • Proven experience in rotating machinery/drivetrain design;

• Familiarity with established design techniques to mitigate rotating imbalance;

• Expertise performing static and/or modal analyses for mechanical systems;

• Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

• Proven definition or production of manufacturing drawings including selection of dimension tolerances;

• Familiarity with material selection to meet strength, weight, durability, and cost targets;

• Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;





Highly Desired Qualifications:



• Hands-on experience (work or personal) with rotating machinery assembly/disassembly;

• Proven ability to select appropriate bearing types/sizes, shaft splines, and mechanical couplings for drivetrains;

• Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD • Background in designing with aerospace grade materials including fiber reinforced composites;

• Exposure to ANSYS Workbench, FEMAP/NASTRAN or any similar sophistication FEA software;

• Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

• Familiarity with ASTM F2245 regulations;

 
 
Job Number: 18-13398
Job Location: Woburn, MA
Rate: 105000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer Senior- contract injection molding

JOB DESCRIPTION
This role is on one of Insitu’s air vehicle teams. This role will work with other engineers and designers to achieve the goals of assigned programs and projects.
The air vehicle integrated product team (IPT) is in the process of evaluating and where feasible and cost effect converting parts to be injection molded.
The successful candidate will have a proven track record for taking parts from development to production with a complete understanding of the process, material selection, achievable tolerances, verification and validation methods associated with complex 3D geometries.

QUALIFICATIONS
•Experience with computer aided tools including both solid modeling and drafting packages is required. Experience with Solidworks is strongly desired.
Experience using FEA modeling tools is desired.
•Knowledge of manufacturing processes, materials science, and prototyping techniques is strongly desired.
•Ability to apply mechanical engineering theories to practical designs is required.
•Ability to establish test requirements from supporting documentation, test plans, internal and external customers is desired.
•Excellent verbal and written communication skills are required.
•Knowledge of injection molding process, materials and limitations is required.
•Knowledge of design and drafting methods including geometric dimensioning & tolerance is strongly desired.
•Knowledge of engineering tests techniques, methods, equipment and instrumentation is strongly desired.
•Knowledge of domestic and international regulations (e.g. FAA or DOD regulations) on the certification of test articles/vehicles to assure compliance of design is desired.

EDUCATION & EXPERIENCE
8 or more years in an engineering classification with a Bachelor's degree or 6 or more years in an engineering classification with a Master's degree.

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APMECHENGR
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer reports to the Engineering Manager and a member of a given integrated product team, the Mechanical Engineer will participate in the development of new aircraft system designs, modifications to existing designs, and new customer introductions.


• Mechanical Engineer is responsible for the design assigned including manufacturability, assembly, and meeting cost and weight targets
• Responsible for Bills of Material,
• Responsible for following up/communicating with purchasing, prototyping, testing, and manufacturing to ensure high quality of design.
• Detail design of mechanical products
• Design for manufacturability and assembly
• The design and detail modeling of a variety of suite components in order to meet the program requirements
• Production detail design and support development
• Delivery of detail design to BOM
• Ability to make trade-offs to yield optimum results, achieving cost, weight, functionality and reliability goals
• Managing and meeting cost and weight targets
• High attention to details in the design
• Communicating effectively and professionally with customers and suppliers
• Participating in Design Reviews throughout each phase of the New Product Introduction process
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Following and contributing to the development of the Best Practice guidelines as laid out in Quality documentation
• Checking engineering packages
• Generating and/or revising specifications
• Participating in the validation of the product (using such methods as prototyping, test, DFMEA)
• Detail design of work packages
• Coordinate and consolidate mechanical design from various product sites
• Good communication and leadership skills
• Travel up to 10% both domestically and internationally
• Any other reasonable engineering related duties


• Bachelor's degree in Engineering from a four-year college or university; and three-to-five years related experience and/or training; or equivalent combination of education and experience.
• MS Word, Excel and Outlook
• NX 9 (formally Unigraphics) experience
• Siemens TeamCenter9
• Master’s degree in Mechanical Engineering or related field
• Aircraft interior architecture
• Cabin interior experience
• Effective application of tolerances and GD&T
• Awareness of the certification framework within which the work is undertaken
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Active Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment.

Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Additional Job Requirements:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience

 
Job Number: 18-08279
Job Location: Broken Arrow, OK
Rate: 34.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-09-19 00:00:00.0
Start Date: 2018-03-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Fort Walton Beach, FL
Rate: $25.00 - $50.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Exempt

*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description
Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Mechanical Engineer. A-Shift. On aircraft and off-aircraft operational requirements. Schedule In this role, the employee will review designs for ease of manufacturing and work closely with design engineering for improvements. The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions. This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists. The employee will work with manufacturing on issues and process improvements

Desired:
*****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Jobscope experience TeamCenter Engineering experience Production Engineering experience Production Operations experience Mechanical Experience Electrical Experience Aircraft Experience Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge Active Secret Security Clearance within the last 2 years. Ability to read and interpret engineering drawings. Excellent verbal and written communications skills
 
Job Number: 8661
Job Location: Fort Walton Beach, FL
Rate: $25.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Scientist III

Description:
Summary:

Involves the application of scientific and technological principles encompassed in acoustics and ultrasonics for testing and inspection purposes. Develops methods, equipment, and systems for acoustic and ultrasonic testing of materials. Develops acoustic and ultrasonic models and simulation tools.



Requirements: Requires complete understanding and application of standard engineering or scientific theories, concepts, principles, and techniques. General knowledge of other related disciplines. Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives. Works under minimal direction. Independently determines and develops approaches to solutions. Work is reviewed generally upon completion for adequacy in meeting objectives. Frequent inter organizational and/or external contacts. Represents the organization. Strong working relationships outside of immediate work group.



Education: BS Minimum; PHD candidates will take priority

Experience: 7+ Years



Manager Must Haves:

- a PhD level scientist with acoustics/ultrasonics background

- Ultrasonic / acoustic / non-destructive testing
 
Job Number: 18-10488
Job Location: Corning, NY
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-12-31 00:00:00.0
Start Date: 2018-03-26 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer III - (MO)

Description:
Develops, maintains, and modifies mechanical instrumentation data system installation designs (flight and lab test data system equipment, sensors and wiring installations), using 3D/2D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product life-cycle
Performs, aircraft volume studies, equipment and sensor layouts to validate and verify installation designs meet test and environmental requirements and specifications
Coordinates with Integrated product teams and internal/external suppliers to optimize designs and achieve program goals
Provides Design support to internal/external fabrication and installation centers

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: MechSystEngMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Engineer

Description:
The Mechanical System Engineer reports to the Engineering Manager the Mechanical Systems Engineer prepares test plans; models test units and oversee testing in accordance to stated requirements. Areas of testing include environmental, vibration, airflow, and acoustic. Plans and designs mechanical equipment and the systems in which they are installed, this includes oversight of the installation, operation, and maintenance of equipment. Performs complex assignments often requiring development of new or improved products, processes, or techniques. Assesses feasibility and soundness of proposed engineering tests, products, or equipment.

JOB RESPONSIBILITIES

• There must be an awareness of aircraft systems and the certification framework within which the systems are qualified and certified.
• Tasks include: writing test plans and test reports along with coordinating test activities between all participants.
• Must be effective in the use of Microsoft Word and Excel. Reviews project-related documentation to ensure its accuracy.
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and manufacturing difficulties.
• Coordinates project activities with outside suppliers, other engineering units or other business units to facilitate project completion.
• To undertake the checking of detail, sub-assembly, general assembly and installation drawings.
• Thorough knowledge of engineering disciplines (e.g. Fluid mechanics, solid mechanics, heat transfer, structural dynamics, acoustics etc.)
• Experience in testing small aircraft component testings (e.g. Faucet, water heaters, pumps etc. or something similar)
• Performs other related duties as required

• Bachelor’s degree (BA/BS) in Engineering or related field from four-year college or university; a minimum of five years related experience and/or training; or equivalent combination of education and experience.
• Must be effective in 3D modeling and use of PDM systems.

• Knowledge of Potable Water and Waste Systems
• Proficiency in Unigraphics NX7 or higher and TeamCenter is preferred.
• Aircraft interiors experience a must.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems DER

Description:
Dept. 660 Mechanical Systems DER

Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• DER for Cockpit Arrangements and Cabin Arrangements
• Mechanical Chart of Authority should mention Cockpit Arrangements
• Electrical Chart of Authority should mention mechanical aspects for electrical installations
• Authority required on Part 25 Chart C1 : A1, A2, A7, D1, D2, D7, E1, E2, E7, K1, K2, K7, N1, N2 and N7
• Authority required on Part 25 Chart C2 : I1, I2, I4, L1, L2, and L4

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15)+ years progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job.
• Requires approval of Eng PRB incl bus justification.

Essential Functions:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry
• Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-226
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III - (Seal Beach)

Description:
Supports the computer-aided design (CAD) development and documentation of mechanical, hydraulic , propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design. Supports the development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups. Proficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).Generates GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications. Produces First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others.

ACS Group (formerly 'Comforce')
 
Job Number: MechEngSB
Job Location: Seal Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer IV - (AZ)

Description:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Highly experienced and skilled Mechanical systems design engineer with experience, knowledge and excellent usage of two (2) major 3D CAD/CAM systems; (1) Catia v5/Enovia and (2) Unigraphics UG-NX/Team center
• Catia v5 - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, Relational models, IRMs, ARMs, CARMs, and the IVT tool
o Experienced and skilled in working with Client's Enovia PDM tool
o Experienced and skilled in working with Client's processes and procedures, such as releasing technical data packages through the release process

• UG-NX - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, CLOs, ALOs, ICMs, Fly-Through models
o Have experience with – military Team Center (TcE) PDM and Client's - release processes
o Experienced and skilled in using with – military/space Team Center PDM tool

ACS Group (formerly 'Comforce')
 
Job Number: MechEngAZ
Job Location: Mesa, AZ
Rate: up to $55/hour
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Seeking a Mechanical System Design Engineer

Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: CA
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: Mojave, CA
Rate: Up to $65.00-DOE
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-143
Job Location: Savanah, GA
Rate: $59 - $62
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Structural Engineer

Description:
Project Overview: Our computational challenges are so big and unique we can't just buy our hardware, we've got to make it ourselves. Our Platforms Team designs and builds the hardware, software and networking technologies that power all of our services

Overall Responsibilities

The progress of the key responsibilities.
Work with cross organization team to develop mechanical and structural systems.
Prepare technical reports.
Communicate technical results to documentations and presentation.
Top 3 Daily Responsibilities: Evaluate new product designs, define structural requirements and design strategy based on applicable standards and guidelines,

Perform design/analysis calculations for structural steel, sheet metal assemblies, mechanical components with minimum or no supervision. Support interdisciplinary projects, manage multiple structural evaluations, provide cost estimates and communicate technical report and presentations and assist design team in

Required Qualifications:

Bachelors degree in Civil or Mechanical Engineering with an emphasis on structural design.
Minimum 3 years experience in Structural Engineering and related areas
Proficient knowledge of CADD tools (AutoCAD, Visual Analysis, STAAD/RAM, etc.) for efficient
production of engineering work.

Able to read design/construction drawings and be able to understand design narratives and
calculations

Strong communications skills - ability to work directly with internal and external teams
Design experience with structural steel, mechanical systems and components.
Self-motivated with ability to work in a team environment.
High level of attention to detail.
Nice to have

Masters degree in Civil or Mechanical Engineering with an emphasis on structural design. P.E. licensed Experienced with AISC Steel Manual, ACI 318, and ASCE 7. (This is a good pointer for nice to have)

Experience with AutoCAD, Creo or Solidworks.

Knowledge of Excel, and STAAD Pro (or other modeling software) a plus.

Exposure to construction means and methods.

Ability to meet required deadlines while simultaneously completing other tasks.

Experience working with other disciplines understanding their interface requirements.
 
Job Number: 385535
Job Location: Seattle, WA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanism Design Engineer - Interiors

Description:
Seeking an experienced Mechanisms Design Engineer focused on design, performance, manufacturing coordination, and installation integration of mechanism designs. The initial opportunity is related to interior seats, but there are many other opportunities to follow.

Responsibilities:

• Capable of creating design requirements, validating them, and decomposing them into an integrated verification plan for compliance/certification.
• Contribute to conceptual and preliminary design trades of varying complexity and document results of work
• Develop parametric CATIA V5 models that can be used to refine final mechanical designs
• Capable of interpreting engineering schematics to drive detail designs
• Works closely with prototype shop as well as production shop personnel to optimize design concepts
• Able to work closely with Industrial Design Engineers to integrate aesthetic and creative design requirements into design
• Supports the review of production planning and procedures to ensure compliance with design requirements
• Contributes to the creation of test plans in order to verify design intent, requirements and functionality
• Working knowledge of industry best practices; including design specifications (commercial and DOD), regulatory guidance (FAA AC), and aerospace recommended practices
• Expected to present work and technical findings to management and senior leadership through design reviews and program milestones where appropriate

Qualifications:

• BS in Mechanical/Aerospace Engineering or relevant engineering discipline
• 6+ years of experience in preliminary design, performance and/or integration of mechanical installations
• Experience with CATIA V5 and the CATIA kinematics tools
• Experience with Product Lifecycle Management tools
• Willingness to adapt and cross-train
• Strong team player with quality organization and pragmatic problem solving skills
• Expected to work independently as well with supervision given general guidance
• Experience with flight vehicles or vehicle systems certification to commercial standards (14 CFR Part 23 or 25) and/or military/government standards (DOD or NASA) is preferred


The Structures Company is an AA/EOE.
 
Job Number: 200
Job Location: CA
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Engineer

Description:
N/C Engineer conducts a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. Programmer requirement is for a Highly skilled NC programmer for high speed machining centers. Programmer must also have experience related to the startup of a new high-speed machining center.




Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Designer

Description:
NX Designer

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-8 month W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**

Description:
-Proficiency with NX is required.
-Mechanical or Aerospace engineering BSME with 2 yrs min experience,
-efficient with part & assembly layout/ modeling capabilities using NX (V10),

Tasks could include:
-General model management
-Drawing creation/support
-Secondary hardware design
-Line routing and layout of secondary attach hardware (Structural, Avionics, Ordnance, Propulsion)
-Efficient with Geometric Dimensioning & Toleranceing
-Able to coordinate with other technical disciplines (Design, Strength, Avionics, Propulsion) and impacted sites (Production, Test House, etc.) to ensure final design meets all requirements.
-Proficiency with NX is required.

Requirements:
-Bachelor degree in Mechanical or Aerospace engineering
-2+ yrs engineering/design experience
-Proficiency with NX is required; version 10 highly preferred
-Efficient with Geometric Dimensioning & Toleranceing
 
Job Number: 8819
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 6-8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst II

Description:
PLM Configuration Analyst II

Savannah, GA
Long Term Contract
Pay Rate: DOE

1st Shift

Unique Skills:

Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required. Strong customer relationship management skills. Experience Requirements: Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design Essential Job Functions: PLM apps user support with primary focus on CATIA V5 users Provide solutions to end user identified technical problems in support of the PLM environment. Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:

Bachelor's Degree in Engineering, Computer Science or a related curriculum required or or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. 3 years of engineering or IT experience. 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.). 1 year Database experience, data migration/conversion or related experience preferred..

Position Purpose:
Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle. Provide support for the development of training courses for CAD and PLM Applications.

Principle Duties and Responsibilities:

Essential Functions:

1. Execute plans, according to schedules, for engineering assignments. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Coordinate activities for lower level engineering staff assigned to specific projects. 4. Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements. 5. Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs. 6. Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action. 7. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 8. Develop system queries and utilities to support users information researches 9. Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems. 10. Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA. 11. Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting. 12. Ensure proper security, archiving and audibility of product releases. 13. Analyze, monitor and report business and system status metrics.

Additional Functions:

1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:

1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
Languages Required (in addition to English): None
 
Job Number: 8931
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer - Level 4

Description:
Packaging Design Engineer - Level 4

Selected candidate will work with Lead Packaging Engineer to provide packaging requirements, specifications, and concepts for ongoing and future programs. The selected candidate will evaluate technical feasibility between product lines, and type of packaging required, with an emphasis on innovation, functionality, and sustainability. And where required, provide estimates of costs and potential suppliers for functional packaging, and interact closely with both product teams, and packaging suppliers for a best fit packaging solution.

PRIMARY RESPONSIBILITIES:

(40%) Designs and develops packaging, handling, and transportation concepts for various programs with an emphasis on the materials and structural characteristics of the finished packaging product, with a keen ability to handle multiple projects and work under pressure to meet deadlines and project objectives

(30%) Ensures functional compatibility with packaging equipment and overall efficient manufacturing operations.

(20%) Provides packaging technical input and assistance internally and externally to product teams, Quality Assurance, Structures, and can network effectively with vendors, enterprise communities to transfer knowledge and apply external ideas to packaging capabilities.

(10%) Maintains an up to date knowledge of all relevant Packaging Safety and Compliance requirements, as well as industry trends and developments for the packaging of military items.

Skills:
5+ years packaging experience is a plus
Familiar with ASTM standards for packaging, and shipping boxes is a plus.
Familiar with MIL-HDBK-304, MIL-STD-810, and MIL-STD-2073 is a plus.
Strong communication skills.
Excels in a collaborative team environment and is able to lead cross-functional teams, also work in cross-functional teams.
Understanding of ISTA guidelines with an emphasis in reducing product damage and improving environmental performance.
Networking & Information gathering skills

Education: B.S. Degree in Packaging Science, Mechanical Engineering or equivalent combination of education/experience
 
Job Number: CA41788
Job Location: Canoga Park, CA
Rate: 60.00
Per Diem: Split available
Overtime: Possible
Duration: 6 + Months
Start Date: 04/16/18
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer - Level 4

Description:
Packaging Design Engineer - Level 4

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 Month W2 Contract
Shift: First, OT possible
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
** This is a Hardware packaging role. NOT a Software or Electrical packaging role. Candidates should have Mechanical Packaging experience **
-Selected candidate will work with Lead Packaging Engineer to provide packaging requirements, specifications, and concepts for ongoing and future programs.
-The selected candidate will evaluate technical feasibility between product lines, and type of packaging required, with an emphasis on innovation, functionality, and sustainability.
-And where required, provide estimates of costs and potential suppliers for functional packaging, and interact closely with both product teams, and packaging suppliers for a best fit packaging solution.

PRIMARY RESPONSIBILITIES:
(40%) Designs and develops packaging, handling, and transportation concepts for various programs with an emphasis on the materials and structural characteristics of the finished packaging product, with a keen ability to handle multiple projects and work under pressure to meet deadlines and project objectives
(30%) Ensures functional compatibility with packaging equipment and overall efficient manufacturing operations.
(20%) Provides packaging technical input and assistance internally and externally to product teams, Quality Assurance, Structures, and can network effectively with vendors, enterprise communities to transfer knowledge and apply external ideas to packaging capabilities.
(10%) Maintains an up to date knowledge of all relevant Packaging Safety and Compliance requirements, as well as industry trends and developments for the packaging of military items.

Skills:
-CREO required
-WindChill strongly preferred
-5+ years packaging experience is a plus
-Familiar with ASTM standards for packaging, and shipping boxes is a plus.
-Familiar with MIL-HDBK-304, MIL-STD-810, and MIL-STD-2073 is a plus.
-Strong communication skills.
-Excels in a collaborative team environment and is able to lead cross-functional teams, also work in cross-functional teams.
-Understanding of ISTA guidelines with an emphasis in reducing product damage and improving environmental performance.
-Networking & Information gathering skills
Education:
-B.S. Degree in Packaging Science, Mechanical Engineering or equivalent combination of education/experience

Skills/Required
AEROSPACE DESIGN ELECTRONIC PACKAGING ASTM STANDARDS MIL-STDS CREO
 
Job Number: 8869
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer - Level 4 ** This is a Hardware packaging role. NOT a Software or Electrical packaging role. Candidates should have Mechanical Packaging experience ** CA

Description:
161676/8104398 (7553248)
Job Title: Packaging Design Engineer - Level 4

Number of Positions: 1

** This is a Hardware packaging role. NOT a Software or Electrical packaging role. Candidates should have Mechanical Packaging experience **

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Experience with CREO.
-Experience with Windchill strongly preferred.


Selected candidate will work with Lead Packaging Engineer to provide packaging requirements, specifications, and concepts for ongoing and future programs. The selected candidate will evaluate technical feasibility between product lines, and type of packaging required, with an emphasis on innovation, functionality, and sustainability. And where required, provide estimates of costs and potential suppliers for functional packaging, and interact closely with both product teams, and packaging suppliers for a best fit packaging solution.



PRIMARY RESPONSIBILITIES:

(40%) Designs and develops packaging, handling, and transportation concepts for various programs with an emphasis on the materials and structural characteristics of the finished packaging product, with a keen ability to handle multiple projects and work under pressure to meet deadlines and project objectives
(30%) Ensures functional compatibility with packaging equipment and overall efficient manufacturing operations.
(20%) Provides packaging technical input and assistance internally and externally to product teams, Quality Assurance, Structures, and can network effectively with vendors, enterprise communities to transfer knowledge and apply external ideas to packaging capabilities.
(10%) Maintains an up to date knowledge of all relevant Packaging Safety and Compliance requirements, as well as industry trends and developments for the packaging of military items.


Skills:
Experience with CREO.
Experience with Windchill strongly preferred.
5+ years packaging experience is a plus.
Familiar with ASTM standards for packaging, and shipping boxes is a plus.
Familiar with MIL-HDBK-304, MIL-STD-810, and MIL-STD-2073 is a plus.
Strong communication skills.
Excels in a collaborative team environment and is able to lead cross-functional teams, also work in cross-functional teams.
Understanding of ISTA guidelines with an emphasis in reducing product damage and improving environmental performance.
Networking & Information gathering skills


Education:
B.S. Degree in Packaging Science, Mechanical Engineering or equivalent combination of education/experience

Skills:
Required
MIL-STDSCREOAEROSPACE DESIGNELECTRONIC PACKAGINGASTM STANDARDS
Additional
WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 04/16/2018 Hours Per Week: 40.00
Est. End Date: 10/14/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8104398
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Seeking an experienced Aerospace Program Manager with a minimum of 10 years demonstrated experience in applying project/program management principles and processes in an aircraft development, testing and customer delivery environment. We need candidates with an entrepreneurial spirit, fueled by innovation, collaboration, with emphasis on forward thinking. will coordinate efforts related to the design, development, testing, proto‐typing, documentation, engineering outsourcing, flight testing, and FAA Part 400.

Qualified candidates will have experience successfully developing and managing projects in a fast-paced, deadline-driven aircraft or manufacturing environment. This Program Manager must have proven ability to successfully manage complex strategic projects that transitioned to production and customer delivery. You will need to be experienced in interfacing directly with customers as needed and executive leadership, as well as demonstrate an ability to balance technical knowledge and business acumen to manage this product. The right person will have a strong technical background in composite structures, avionics and mechanical systems, with experience leading and managing complex product or system developments.

Key Components
 Oversee and manage the development, implementation, testing, and integration of the air vehicle
 Act as the central focal point and authority for execution of the project tasks and goals
 Coordinate the engineering activities between the various engineering specialties within the product team
 Work closely with production management and engineering to continuously improve systems, processes, and production
 Formulate and clearly communicate overall program strategy, objectives, and plans, and leads team with clarity and purpose
 Monitor and report to management the progress of each functional element of the assigned product responsibility in terms of work, schedule and cost performance
 Track and manage the product engineering risks – identifies potential issues and problems that could impact program performance, and takes proactive action to resolve issues regarding cost and schedule

Key Requirements
Professional Requirements
 10+ years’ of specifically relevant experience
 Preference is for current experience as an air vehicle program manager
 Experience with management of aerospace research and/or development programs, as well as with aircraft production/manufacturing programs
 Demonstrated hands-on knowledge of aircraft structure, hardware components and subsystems is strongly preferred
 Strong experience resolving technical, schedule and cost problems related to the assigned program/product responsibility
 Effective leadership skills, including being an excellent listener and motivator
 Assertive self starter, with the ability to accomplish goals outside of their functional group
 Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.).Excellent organizational skills and problem solving skills
 Strong computer skills, including Microsoft Word, Outlook, Excel and Powerpoint
 Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15).

Educational Requirements
BA/BS degree required, MA/MBA/MS preferred


The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CA
Rate: DOE
Duration: Full-Time Position
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
Windsor Locks, CT
12 month contract


Our client is looking for a Project Engineer with a background in Aerospace or Mechanical, with 5 years minimum of experience in Space, Aerospace or Defense.


Must have experience leading IPD Teams.. Must have experience with SAP and understanding or processing hardware in concert with SAP. The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.

• Planning, execution, coordination and communication of team activities and commitments
• Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
• Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
• Ensure targeted goals (schedule and cost) is communicated to the team members
• Identify, assess and manage the team’s risks
• Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
• Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
• Meet design and design-to-cost requirements.
• Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.

The candidates must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
Assist in creating program directives that define Earned Value Plans.
Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
Coordinate, track and support development and flight hardware build and test.
Initiate in scope engineering changes working with all functions to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support our client's electronic EC processes.
 
Job Number: 53404
Job Location: Windsor Locks, CT
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector

Description:
Basic Qualifications
-High School Diploma or GED from an accredited institution
-Minimum five (5) years’ inspection experience in an Aerospace environment
-Minimum three (3) years’ experience with AS9102 first article inspection
-No relocation benefit is offered for this position. Only candidates residing within 50 miles of Irvine, -CA will be considered for this position.

osition Criteria:
-Be familiar with and able to read and interpret drawings and engineering specifications
-Good verbal and writing communications skills in English
-Good interpersonal skills to establish and maintain effective intra and inter-departmental relationships at all levels
-Possess basic knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, blueprints, certifications of conformance, chemical and physical analysis reports and test reports
-Possess understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5.
-Possess knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4.
-Knowledge or experience inspecting aerospace products with special processes (e.g., anodizing, chem film, passivation, heat treating, penetrant and radiography, etc.)

Preferred Qualifications:
-Proficient using coordinate measuring machine
-CMM Programming experience

Essential Functions:
-Inspect subassemblies, and assemblies in the receiving, assembly, test, machining and shipping areas along with performing the more complex machined part and casting first article inspection to verify conformance to blueprints, engineering specifications and customer requirements
-Perform final dimensional or mechanical inspection of parts, components, subassemblies and assemblies for conformance to blueprints, engineering specifications and Customer requirements
-Use a variety of precision measuring instruments such as micrometers, vernier calipers, comparators and gauging equipment.
-Assist with devising dimensional gauging set-ups, perform part layout inspection and assist in establishing part inspection procedures
-Report possible nonconforming material
-May be required to audit test and assembly processes.
-May be required to interface with various customers or government representatives
-Process and complete required quality documentation
-Perform complex first article inspection on components, sub-assemblies and assemblies to AS9102 requirements
-Surface plate layout inspection
-Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.
-Discuss with or refer major or critical inspection problems or decisions to lead person or supervisor for disposition
-Cross train on the inspection of different products
-Perform other related duties as assigned
 
Job Location: Irvine, CA
Rate: $25
Per Diem: No
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Essential Functions:
• Provide Premier customer quality interface and expertise in order to proactively assure that their requirements are understood and satisfied.
• Host & support Customer, Internal and Third Party Audits as required.
• Execute the development, implementation and continued improvement of the Quality Management Systems throughout the operation.
• Working collaboratively with all levels of the site in supporting Eaton’s Business System goals and objectives.
• Analyzing organizational Customer/Internal quality metrics and performing periodic reviews to evaluate results recommending, planning & taking actions to close gaps at an operational level.
• Champion activities to contribute and drive in the investigation and elimination of internal and external quality problems using applicable problem solving techniques for determining Containment, Root Cause and Corrective/Preventive Action solutions along with Verification actions.
• Contribute in the implementation of quality assurance training programs and conducting training in quality-related topics
• May participate as required in product development gate review meetings with launch activities including the identification of customer expectations and ensuring compliance that Quality requirements are flowed down and met
• Provide support in the way of development and evaluation of process capability, process control plans, analysis of out-of-control conditions and process audits.
• Develop, implement and audit inspection and test plans, acceptance criteria, and process/work instructions.
• Assist in establishing technical advice & maintaining an atmosphere of Continuous Improvement to cross-functional teams.
• Dimensional review of G&T to AS9102 standards.

Qualifications

Basic Qualifications:
• Bachelor’s degree from an accredited institution
• Minimum of three (3) years of work experience within a Quality function


Position Criteria:
• Working knowledge of process auditing techniques to ensure compliance to defined quality requirements
• Ability to learn product and end user application/specifications, including product testing requirements
• Knowledge of product manufacturing, assembly, test and inspection processes
• Willingness to ‘Think outside the box’ and can work well individually or in a Team environment
• Work to resolve supplier technical issues in a timely manner to ensure a continuity of supply of compliant material

Preferred Qualifications:
• Bachelor’s degree in Engineering from an accredited institution
• 5 years of progressive experience in Aerospace industry
• ASQ Certified Quality Engineer (CQE) and/or Certified Quality Auditor (CQA)
• Customer-specific quality registration, certification processes experience (i.e. ISO9001, ISO/TS-16949, AS9100)
• Previous work experience of problem solving methods such as: Six Sigma, 8D, root cause analysis, and the associated statistical tools used to analyze problems, evaluate and complete improvement projects
• Working knowledge and experience in process auditing techniques to ensure compliance to defined quality requirements
• Previous work experience in Lean Manufacturing and Process Variation Reduction concepts and tool sets as they relate to process/product variability, and root cause and corrective action determination
• Familiar with and experience in product conformity requirements
 
Job Location: Camarillo, CA
Rate: $40-$45
Per Diem: No
Duration: apprx 12 mos
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
Location: Pomona, CA
Rate: $43.56/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: No
Overtime: Possible

****MUST be a U.S. Citizen****

Job Description:
Our client is currently seeking a highly motivated, Receiving Inspector to join their team working in a hands-on, collaborative environment. The successful candidate must be familiar with a manufacturing environment, have computer knowledge, a self-starter who pays attention to detail and accuracy and taking responsibility for his/her work.

Responsibilities include:
- Perform receiving & 1st article approval of manufactured/assembly, verification of processes as required to assure drawing and material specifications for mechanical components (i.e. board, circuits, and wiring).
- Provide input to improve quality procedures. Inspection of products, material and generate Inspection Records in accordance with the AS9100 Specification.
- Ensure nonconforming material is isolated from acceptable parts and is properly documented and controlled; and in accordance with client/Customer's procedures.
- Perform incoming inspection and lot processing using our ERP system SAP.
- Perform presentation of compliant parts to operations assembly staff.
- Work with Quality Management and Procurement to drive payment support with data collected from above inspection actions.
- Interface with personnel within manufacturing and other internal departments.

Requirements:
- US Citizenship required
- Minimum of 3+ years’ experience in quality inspection and disposition
- Minimum of 3-5 year in a manufacturing environment
- Direct experience with Inspection and testing of Military or aerospace hardware including reviewing testing procedures and drawings required.
- Controls and Instrumentation, Manufacturing Inspection Experience, Quality, Inspection Tools, Tooling, Safety Management, Quality Focus, Judgment, Decision Making.
- Must be computer literate (comfortable accessing computer databases and entering data).
- Ability to multi-task and prioritize.
- Ability to work independently as well as a team player.
- Able to read basic written instructions and follow verbal instructions.
- Quick learner with strong attention to detail
- Must have the ability to work with others in a fast-changing environment.

Education:
High School Diploma Required.
 
Job Number: 8858
Job Location: Pomona, CA
Rate: $43.56/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
~ Looking for someone that is skilled in engines, preferably in the Automotive, Aircraft or Military Industry; Mechanical assembly may be considered, but engine experience is ideal.
~ Individual will be tearing down aircraft engines and preparing for rebuilds (strictly mechanical, not electrical).
~ MUST have familiarity with equipment (hand tools, pneumatic, drill presses, rivet guns, etc).
~ MUST be computer literate; some data entry using Excel to document evaluation results
~ No harness experience necessary

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 017_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Utility Person - 2nd Shift

Description:
Notes from the Hiring Manager:

The 2nd Shift Utility Person will provide support to the Manufacturing floor, as well as preparation support for Paint, but may also provide support in the Mechanical, Electrical or Vehicle Factory performing basic tasks, such as hand work, deburring, stenciling, machine operation, cleaning, organizing, wiring and assembly.

Job Description:

In support of Paint Shop:
> Will perform all surface preparation including body filling, glazing, sanding, cleaning, and masking surfaces. They will set up, adjust and operate automatic paint spraying equipment and drying ovens maintaining thickness or coating in conformance with specifications.

In support of other areas:
> The support includes, assembling details and subassemblies, assisting experienced mechanics with operating equipment, material sizing and ply design layout of composite parts and bond assemblies, and set up and fabricate electronics assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools. The incumbent may also move material by hand, truck or conveyor within assigned storage area

Knowledge, Skills, And Abilities Required:

> 1 – 3+ years of experience with a high school diploma or equivalent; Paint or Body Shop exp is a plus.
> Must be a US Citizen
> Ability to work with minimal supervision and work from verbal and written instructions.
> Ability to operate material handling equipment.
> Work well independently and/or in a team environment.
> Strong attention to detail
> Safety minded and able to work to requirements of a Quality management system.
> Basic PC skills/ knowledge
> Ability to read and interpret blueprints and understand a parts list and multi-level assemblies is a plus.
> Working knowledge of abrasives, paint & finishing specifications is a plus.
 
Job Number: 029_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance with five year re-investigation CA

Description:
161491
Requirement #AERO-REQ-0774
Work Location Palmdale, CA
Work Week 9/80

Number of Resources 1
Security Clearance Secret (Prime Contract:P-16 - investigation within 5 years, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Job Description

Title Software Engineer
Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance with a five year re-investigation. PAR required

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance with five year re-investigation.

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering

Interview Required Yes

Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0774
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 9 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Principal Mechanical Engineer (structural analysis)

Description:
Job Title: Sr Principal Mechanical Engineer (structural analysis)
Location: Rosewood, CA
Duration: Long Term Contract
Pay Rate: $70 to $80/ hour (DOE)

Description:
The selected candidate will conduct structural analysis for space flight or tactical missions and is expected to lead or work with a team of specialized junior and senior structural engineers to evaluate EO/IR hardware designs for static and dynamic environments for strength, fatigue, durability, stiffness, thermoelastic behavior, and other system and sub-system level performance metrics such as Line of Sight.

The Sr. Principal Mechanical Engineer is expected to be closely aligned with the Program and is responsible for all phases of the program life-cycle.
Minimum of 10 years of experience performing opto-mechanical structural analysis for space or airborne structures.

Structural analysis of ground-based systems will not be accepted.

Strong knowledge in the use of commercial Finite Element Analysis codes and modelers, preferably NASTRAN/ PATRAN
 
Job Number: 386102
Job Location: Rosewood, CA
Rate: $70 to $80 DOE
Per Diem: No
Overtime: Yes
Duration: Long Term/ ongoing
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
Sr. Electrical Engineer – Hardware Circuit Board Design
Expected to last 24+ months
Cedar Rapids, IA

Description:
This position focuses on circuit board designs for digital hardware in communication products. We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering. Electrical Engineers perform activities that span all phases of the hardware development lifecycle, including requirements capture, design, integration, verification, factory transition, and customer interface.

This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links. Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products. This position encompasses new design and product sustaining support roles. The selected candidate will work closely with Systems, Software, Mechanical, Environmental Effects, Manufacturing/Operations and Design-to-Cost staff to assure defined requirements are consistently met in all phases of a product's lifecycle.

Candidates must have the following skills:
-Candidate selected will be subject to a government security investigation and must meet eligibility requirements.
-Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
-Circuit board design experience including experience with schematic capture tools
-Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).
-Experience in aspects of the digital hardware life cycle, including requirements capture, design and development, debug and test, and requirements validation
-Ability to effectively communicate in a professional manner and produce detailed, clear and concise technical documentation.

Desired Experience/Skills:
-Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer
-Knowledge of FPGA, ARM, and DDR memory is highly desired.
-Knowledge in the area of high speed design practices including signal integrity is also desired.
-Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).
 
Job Number: 53774
Job Location: Cedar Rapids, IA
Rate: 63.00
Per Diem: Possible
Overtime: Possible
Duration: 24+ months
Start Date: 05/08/18
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Flight Control Engineer

Description:
Responsibilities:
Develop Flight Control Laws and control algorithms to meet vehicle performance, flying qualities, and stability margins on ground and in flight.
Support definition of Flight Control System specifications and requirements and Flight Control Law requirements for handling qualities, sensors, actuators, and controllers.
Design, develop, and test autopilot and associated logic functions.
Develop modeling and simulation of dynamic systems
Develop six-degree-of-freedom (6DoF) digital simulation models and computer code.
Conduct engineering analysis, studies, and performance assessments.
Integrate models into software and hardware-in-the-loop simulation environments.
Verify and validate Flight Control Systems through testing in desktop simulation environment, systems integration labs, aircraft flight test, and aircraft/system qualification and certification activities.
Perform hardware / software integration and testing on flight simulator devices, including pilot in the loop testing.
Support analysis of system architecture, redundancy management, electronic hardware design and integration, and actuator design and integration.
Support development of Operational Flight Program software.
Work closely with engineers of varying disciplines and aircraft Subject Matter Experts to meet flight simulator regulatory and customer training requirements
Participate in engineering design reviews.
Keep current on future technologies and products
Analyze air vehicle flight test data and support flight test activities

Requirements
8 years’ or more experience in flight control law development for aerospace vehicles.
· Knowledge of aircraft and aerospace systems with emphasis on flight dynamics, propulsion and ground reaction forces.
· Knowledge of reversible and irreversible flight control systems.
· Knowledge of MIL-HDBK-1797, MIL-F-8785C; MIL-F-9490D; DO-178B
· Simulation Experience
· Experience with planning and conducting flight tests, and post test data evaluation.
Excellent verbal and written communication skills
Excellent Organizational Skills and problem-solving skills
Strong team player
Excellent computer skills, including word, excel and powerpoint
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA is highly desired

Education/Certifications Required:
BS or MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering (or related field).


Must have simulation and Flight Control Law Development Experience
Knowledge of aircraft and aerospace systems with emphasis on flight dynamics
Knowledge of reversible and irreversible flight control systems.
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran

The Structures Company is an AA/EOE.
 
Job Number: 160
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
Sr. Mechanical Engineer
Wilsonville, OR
6 month contract



The Manufacturing Engineering team is responsible for all mechanical engineering tasks related to the test and process flow of aerospace head-up display and guidance products. This position requires knowledge of engineering theory and principles to determine packaging solutions for electronic, electromechanical and optical test equipment. Our engineers are responsible for ensuring products are safe and comply with our client's standards.

Job Responsibilities
•Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable
•Perform autonomously under the direction of team leaders, program management and engineering management
•Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach
•Contribute to schedule creation and ensure schedule commitments are met
•Create and present program and/or task status presentations to team members and engineering management
•Create and present clear and concise technical descriptions to engineering leadership and customers
•Mentor junior engineers and provide guidance to design manufacturing team members
•Provide input to design and document reviews
•Spearhead investigations for open ended complex problems
•Develop detailed hardware requirements based on product theory, system level requirements and customer requirements
•Complete designs that meet documented hardware requirements
•Create test procedures to support the testing of products to industry and government standards
•Review hardware defects and identify systemic root causes and process improvements

Basic Qualifications
•Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering
•Experience in mechanical engineering design and development
•Knowledge of engineering materials and processes
•Experience with structural and thermal management design
•Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)
•Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles
•Strong technical, analytical and problem solving skills
•Ability to effectively communicate throughout all levels of the organization

Additional skills or experience a plus:
•Packaging of electronic and/or precision optical systems
•Design of manufacturing, calibration and test support equipment
•Aluminum fabrication techniques including: machining & investment casting
•Experience in avionics or aerospace industry
 
Job Number: 53738
Job Location: Wilsonville, ORE
Rate: 45.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Mechanical Engineer with active secret / NASTRAN / PATRAN / Finite Element Analysis CA

Description:
161698/8197877

Sr. Principal Mechanical Engineer with active secret
El Segundo, CA
77-80/hr max
6-12 months

The selected candidate will conduct structural analysis for space flight or tactical missions and is expected to lead or work with a team of specialized junior and senior structural engineers to evaluate EO/IR hardware designs for static and dynamic environments for strength, fatigue, durability, stiffness, thermoelastic behavior, and other system and sub-system level performance metrics such as Line of Sight. The Sr. Principal Mechanical Engineer is expected to be closely aligned with the Program and is responsible for all phases of the program life-cycle. Minimum of 10 years of experience performing opto-mechanical structural analysis for space or airborne structures. Structural analysis of ground-based systems will not be accepted. Strong knowledge in the use of commercial Finite Element Analysis codes and modelers, preferably NASTRAN/PATRAN

Additional Notes
SSBI preferable, not required (Minimum Secret Clearance)
 
Job Number: MB-8197877
Job Location: El Segundo, CA
Rate: 77-80/hr max
Per Diem: no
Duration: 6-12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Engineer (Aerospace)

Description:
Sr. Systems Engineer (Aerospace)

Location: Canoga Park, CA
Pay Rate: DOE ($55/hr - $64/hr)
Duration: 1 Year W2 Contract
Shift: First
Travel: Limited travel to the multiple test sites will be required.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
-Position is for a senior engineer to support development, qualification, and acceptance testing for RS-25 Liquid Rocket Engine Program.
-This position requires knowledge and experience with rocket propulsion systems, data analysis, systems integration, and test planning.
-Tasks include development of test plans, development of test procedures, data analysis, generation of technical documents, preparation/presentation of technical briefings to internal/external customers.
-Under general direction, the Senior Engineer determines approaches to objectives demonstrating an in depth understanding and application of principles concepts and practices.

Breakdown:
90% - The candidate will be required to operate under limited supervision after receiving direction from the the Integrated Product Team Lead and Systems Development Lead. The candidate will be expected to support coordination activities regarding meeting test objectives to develop, qualify and accept the RS-25 liquid rocket engine for flight duty. This includes developing a thorough understanding of the rocket engine systems and test facility systems. The position coordinates the integration of all component and system engineering support for hardware and software. The position leads the post engine test data analysis and any potential anomaly resolution. The position coordinates, prepares, and presents hardware acceptance reviews to the customer. The candidate will be responsible for generating and briefing of technical documentation including specifications, software requests, data review, test readiness reviews, anomaly reports, hardware acceptance reviews, and test report documents.
10% - Limited travel to the multiple test sites will be required.

Skills Required:
-Mechanical Systems Integration, Mechanical Systems Testing, Data Analysis, Test Planning
-Aerospace systems engineering experience

Desired:
-Requirements definition & verification, liquid rocket engine test experience, experience with LOX & LH2 propellants, experience with rocket engine assembly

Education:
Bachelors of Science in Mechanical Engineering, Aerospace Engineering or related field and a minimum of 5 years of experience.
 
Job Number: 8830
Job Location: Canoga Park, CA
Rate: 55-64
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Engineer

Description:
*Ability to deal with complex problems in an international environment of cultural diversity
*Life cycle Product development from concept through verification and delivery to the customer including integration onto the specific platform
*Architecture complex MWS systems, guide the development efforts, review and approve designs concepts, models, and drawings on multiple programs
*Ability to support multiple programs simultaneously
*Technical briefings to management and customers
*Excellent planning, management and communication skills
*Development of technical & product roadmaps and competitive assessments
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, Architectural Design and Interface Control Drawings (ICDs)
*Perform the sophisticated analysis, design and testing of complex systems
*Technical interface between ESA’s external customers and sub-contractors
*Provide technical support to customer and user lab and on-aircraft testing
*Develop and analyze highly complex algorithms
*Support proposal development activities, including proposal text development, cost estimating and presentation activities
*Proficiency in the use of Requirements Management and Model Based Systems Engineering tools
*Work independently and with internal/external organizations
*Willingness to travel domestically and internationally
*Mentor and develop junior engineers in this domain

Qualifications and Experience:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*10+ years functional experience may substitute
*Design and development of Missile Warning Systems, including but not limited to:
-Detailed knowledge of integration of Infra-Red Missile Warning Systems
-Detailed knowledge of single color and dual color Infra-Red Missile Warning System technologies
-EW system hardware design knowledge as it relates to the detection and countering of Radar and missile system engagements (IR & UV)
-Electro-Optical Distributed Aperture Systems
-Digital signal processing concepts including FFT, and DRFM
-Detailed knowledge of algorithm performance associated with MWS and system simulation and modeling
*Knowledge of F-16, F-35 and UH-60 military platforms preferred
 
Job Number: 127393
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract
Shift: 1st Shift
No Per Diem Split

**CONSTRUCT AND ANALYZE FINITE STRUCTURAL MODELS, USING ABAQUS**
**PERFORM DETAILED ANALYSIS USING CLASSICAL ANALYSIS AND FEA METHODS** **WORKING KNOWLEDGE OF CATIA V5**
**MUST have a Bachelor's Degree**
**MUST be a U.S. Citizen**
**MUST have 5+ years of experience with Landing Gear**

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8936
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
The selected candidate will conduct structural analysis for space flight or tactical missions and is expected to lead or work with a team of specialized junior and senior structural engineers to evaluate EO/IR hardware designs for static and dynamic environments for strength, fatigue, durability, stiffness, thermoelastic behavior, and other system and sub-system level performance metrics such as Line of Sight.

• The Sr. Principal Mechanical Engineer is expected to be closely aligned with the Program and is responsible for all phases of the program life-cycle.
• Minimum of 10 years of experience performing opto-mechanical structural analysis for space or airborne structures.
• Structural analysis of ground-based systems will not be accepted.
• Strong knowledge in the use of commercial Finite Element Analysis codes and modelers, preferably NASTRAN/PATRAN
 
Job Number: 41979
Job Location: El Segundo, CA
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Mechanical engineer with experience performing stress analysis on spacecraft or aircraft structures.
Proficient in FEMAP and Nastran
Experience performing fracture and/or fatigue analysis

Experience with Orion or Human Rated Spacecraft Structures
Experience analyzing flight mechanisms
Experience with analysis of composite material systems
Experience with NASGRO
Experience with structural testing
 
Job Number: 41943
Job Location: CO & TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****
*****MUST have ABAQUS, CATIA V5, and Landing Gear Experience*****
*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8686
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Fort Worth, TX
Rate: $65.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****
*****MUST have ABAQUS, CATIA V5, and Landing Gear Experience*****
*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.Must be able to verify U.S. Citizen status.
 
Job Number: 8687
Job Location: Fort Worth, TX
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.


The selected candidate will:
Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 7877
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer / no clearance / candidates with recent ANSYS Structural Analysis experience URGENT CA

Description:
160343/7441118

Job Title: Structural Analysis Engineer

Additional Information: Candidates needed! Manager is interviewing. Must have recent Aerospace structural analysis experience using ANSYS. See job description for other requirements.

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).

-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.



Number of Positions: 4

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).



-Prefer candidates with stable work histories (are not “job hoppers”).



-Master’s degree strongly preferred.



The selected candidate will:

Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.



Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.

-Proficiency using finite element analysis tools such as ANSYS is required.

-Knowledge and experience with aerospace product development efforts is desired.

-Must have the ability to read and interpret engineering drawings.

-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.



Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.

-Master’s degree is strongly preferred.

Skills:
Required

ANSYS AEROSPACE STRUCTURAL ANALYSIS FINITE ELEMENT ANALYSIS

State/Province: California
City/Town: Canoga Park

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 04/01/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7441118
Job Location: Canoga Park, CA
Rate: 65-75/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Previous extensive composite lay-up, fabrication experience preferred.
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic structures (fuselage, wing, empennage).
- Experience reviewing supplier non-conformances a plus.
- Experience should be in a Production and/or schedule driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength / stiffness of surrounding structure while in a schedule driven environment.
- Strong written / verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel, Solumina)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8912
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract Position

***MUST be a U.S. Citizen or Permanent Resident***

Required Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)
- Typically a 5-8hr day work week, with some scheduled weekend OT a possibility.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.

2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8790
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract


****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Prior 2nd Shift experience desired.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8443
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer

Description:
System Engineer reports to the Engineering Manager, the System Engineer will utilize aircraft development expertise to participate in the design of new products, solve systems engineering problems, develop and execute objectives for self and others, and have the ability to effect short-term and some long-term business goals within the aviation industry.

JOB RESPONSIBILITIES

• Captures, understands and documents the customer's system requirements (design, structural, materials & processes, flammability, electrical, mechanical systems etc.
• Designs systems architectures in co-operation with aircraft manufacturers
• Performs interior systems analysis, modelling and simulation
• Performs system safety analysis, including hazard assessment and fault tree analysis
• Develops requirements for systems test facilities
• Defines aircraft installation requirements for avionics
• Participates in Product Release Board Technical support of product trials and pilots
• Prepares and initial performance of Acceptance Test Procedures (ATPs)
• Creates functional product specifications
• Performs other related duties as required
• Day to day job includes understanding the requirements and configuration from the customer and flow it down to each disciplines under certification for on-time cert activities.

Bachelor's degree (BA/BS) from four-year college or university in Mechanical, Aerospace, Structural, or Electrical; and a minimum of three years related experience and/or training; or equivalent combination of education and experience.
• Prior experience as a system engineer. Design engineering and configuration management background are beneficial.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.


EBAS - Electronic Bleed Air System

Control Systems Testing – HW/SW Integration Lab-based Testing of the 777X EBAS, includes system-level testing, Built-In Test focus (fault detection and analysis of impact of failures) analysis of requirements and how they may relate to already-defined failure modes, updating requirements based on test results (Customers Change Requests and DOORS updates).


Senior Systems Design Engineer - Complex control system design and development - Complex diagnostic system design - Extensive experience in requirement management - DOORS experience - Thermal mechanical system knowledge - Aerospace applications experience - Knowledge of aerospace development standards - 10+ years of Systems Engineering experience for aerospace applications (Senior Engineer level experience & knowledge)

Location is Mississauga, ONT (suburb of Toronto).
 
Job Number: WW032818WHC
Job Location: Canada
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 6 months
Start Date: April 15
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer
East Aurora, NY
12 month contract




SUMMARY or MAJOR FUNCTION OF THE JOB

The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.



PRINCIPAL ACCOUNTABILITIES or KEY RESULTS OF THE JOB


Systems Engineering
1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.


Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.


Project Management
1 Manage work packages within the established budget and schedule.
Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES
• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.


QUALIFICATIONS THAT ARE DESIRABLE AT JOB ENTRY or NEEDED FOR BEGINNING EFFECTIVENESS IN THE JOB
• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: 53584
Job Location: East Aurora, NY
Rate: $75
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer NY

Description:
Request number: 5244
Date created: 03/16/2018
Job title: Systems Engineer
Number of openings: 2
Job type: Engineering/IT/Professional
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA

Maximum Hourly Pay Rate: 85/hr
Start Date: 03/26/2018
Tentative End Date: 03/29/2019

Job Description
Function:
1. SUMMARY or MAJOR FUNCTION OF THE JOB
The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.
2. DIMENSIONS THAT SHOW THE RELATIVE SIZE AND SCOPE OF THE JOB WITHIN MOOG
Exercises Significant, but not Controlling, Influence:
Personnel: Total of 3 personnel
Annual Sales to External Customers: US$0 to $1,000,000 (Assigned Project Value)
3. PRINCIPAL ACCOUNTABILITIES or KEY RESULTS OF THE JOB

1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.
Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.
Project Management
1 Manage work packages within the established budget and schedule.
Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES

• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.
5. QUALIFICATIONS THAT ARE DESIRABLE AT JOB ENTRY or NEEDED FOR BEGINNING EFFECTIVENESS IN THE JOB
• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: MB-5244
Job Location: East Aurora, NY
Rate: 85/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer with active secret FL

Description:
161515/8156880
Systems Engineer with active secret
St. Petersburg, FL
12 months

Seeking 3 Systems Engineers for Requirements Development, Data Analysis, SW/Systems Integration and Software Trouble
Investigations. The Systems Engineer will be involved with the following activities:
Create, develop and maintain Requirements
Support design and implement new tactical capabilities
Update/maintain/utilize various simulation tools to support data analysis
Support periodic customer briefings; creating technical presentations and reports necessary to support contract specified
Requirements.


Qualifications and Education Requirements
4-8 years of Science or Engineering work related experience
- B.S. Electrical Engineering; Computer Science; Math – Applied, Mechanical Engineering, Physics, or equivalent
- Understanding of System Engineering Product Development Cycle
- Understanding of Software Engineering Product Development Cycle
- Demonstrated experience with Sensor integration and Tracking
- Strong analytical, communication, and writing skills
- Existing DOD Secret Clearance or greater


Preferred Skills
M.S. Electrical Engineering; Computer Science; Math – Applied, Mechanical Engineering, Physics or equivalent - Self starter with the ability to independently pursue information and solve problems - Knowledge of surface and air radar architecture - Naval Combat System Experience &/or CEC - Experience with modeling and simulation of embedded software. - Experience with MATLAB/Simulink, and modeling/simulation tools.
 
Job Number: MB-R8156880
Job Location: St. Petersburg, FL
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineering Manager

Description:
Systems Engineering Manager

Thie successful candidate will be joining the development team.



Job Responsibilities

  • Lead the Systems Engineering function and team as it enters production phase;

  • Partner with external developers to develop and verify systems through integration and test;

  • Perform functional hazard analysis and simulation, gather data, perform DFMEAs to down-select among alternative architectures based on cost, reliability, safety, and functional requirements;

  • Design systems that are resistant to failures, noise, and parameter variation;

  • Plan, estimate, sequence, and measure the completion of work according to targets and metrics;

  • Elicit, document, and review requirements from all stakeholders: FAA, NHTSA, functional, DFX;

  • Generate and manage the product system-level requirements and architecture documents;

  • Architect data flow diagrams and subsystem interface control documents (ICDs);

  • Allocate requirements to architecture and subsystems and manage integration and validation;

  • Work across electrical, controls, software, mechanical, and power electronics engineering functions to develop product capabilities;

  • Design test-beds or simulations to develop system capabilities prior to vehicle integration;

  • Allocate and manage cost, weight, technology readiness Level (TRL), and reliability metrics;

  • Write test plans, coordinate tests, and document results including HALT and corner-conditions;

  • Manage closed-loop controls development software, sensors, actuators, and user interfaces including state machines, data flow, timing diagrams, fault detection, and recourse;

  • Work with software engineers to implement control laws into embedded controllers.


Qualifications


  • Excellent written and verbal communication skills, as well as presentation skills;

  • Bachelor's degree in Engineering;

  • New Product Development (NPD) and gate review process experience;

  • Outstanding organization, analytical, innovation, and problem solving skills;

  • FAR Part 23 system development process experience (aviation/aerospace);

  • Ability to manage a team;

  • Time and frequency domain math modeling, aliasing, stability;

  • Understanding of power, energy, HEV topologies, actuators, sensors, human-machine interface;

  • Methods: function flow, use case analysis, state machines, timing diagrams, data flow;

  • Process templates: DOD 498, ARP 4754, INCOSE Systems Engineering Handbook, V-Model;

  • Ability to use Microsoft Excel, Word, PowerPoint, and MATLAB;

  • Holds a valid US driver's license.


Highly Desired Qualifications


  • Master's degree in Engineering;

  • Automatic code generation;

  • Automotive control system development;

  • Formal Systems Engineering training or certification;

  • Closed loop multi-variable classical, state-space, and non-linear control theory ;

  • Experience with triple- and quadruple-redundancy methods for controllers and software;

  • Requirements management software such as DOORS, Code Beamer, Team Center, or other;

  • Managed release process, design review checklists, and change management;

  • PMP, project management, supervisory, or team leadership experience;

  • Lab equipment: oscilloscopes, data acquisition, hi-pot, spectrum analyzers;

  • DFSS, Design of Experiments, Axiomatic, P-Diagrams;

  • Filtering and Digital Signal Processing;

  • C programming.



 
Job Number: 18-13614
Job Location: Woburn, MA
Rate: 135000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Deborah Allaire
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer - Electronic/Electrical Design III - (MO) (UG NX8)

Description:
Confidential Secret, NOT REQUIRED to start

Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

The successful candidate will be responsible for electronic/electrical component packaging, fixture/test station design. This will include the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements. This person will work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.

o 10 + years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.
o Working knowledge of 3-D solid modeling
o Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
o The Person selected shall meet the International Traffic in Arms Regulation (ITAR) requirements to work on government contracts

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: UGEETechDesMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer - Wiring Installation Design III & IV - (PA)

Description:
Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under minimal direction. Additionally: Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EEDesignPA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer IV - (AZ)

Description:
Leads the development and maintenance of mechanical/structural engineering product definition. Oversees the development and design of layouts and the modification of existing designs to satisfy customer and production requirements. Develops product definition based upon Boeing requirements and parameters. Coordinates development of product definition with internal/external parties to ensure compliance with applicable standards, requirements and design parameters as well as product functionality. Integrates work statement, work scope and work transfer packages with internal and external customers to requirements. Oversees, directs and integrates product definition data packages, requirements and parameters across internal and external business partners and products to provide a functional end-product. Investigates and resolves complex manufacturing process or engineering related issues. Verifies accuracy of technical and non-technical data produced by others. Develops, validates and maintains new processes and procedures to increase productivity and reduce costs.

Unigraphics - UGNX
Catia V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: TechDesAZ
Job Location: Mesa, AZ
Rate: up to $40/hour
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Lab Tech 3

Description:
Test & Evaluation Lab Tech 3

Location: Tukwila, WA
Position Type: W2 Contract

Job Description:
Plans, conducts and documents Structural tests on products, systems, components, and materials. Designs and analyzes test systems, materials, components, and control software. Coordinates test requirements, determines test methods and capabilities. Conducts system test preparations by coordinating system integration, fabrication, modification, setup, checkout and teardown. Conducts tests, analyzes data and documents results. Troubleshoots and resolves laboratory and test-related problems. Coordinates test laboratory activities including maintenance, repairs, data validation and test reporting. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
61Y-Test Operation

Skills: Category Name Required Level
Technical Skills Control System Yes Novice
Technical Skills Mechanical Aptitude Yes Novice

Please share updated resume at ravi@iconma.com
 
Job Number: 18-04040
Job Location: Tukwila, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer 4

Description:
Thermodynamics Engineer 4

Location: Centennial, CO
Pay Rate: DOE
Duration: 1 Year W2 Contract
Shift: 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Job Description
Performs thermal analysis at both the detailed component level and at the systems level. Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.
Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermal analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8924
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer IV

Description:
• Perform thermal analysis for recurring mission to support GSL P&TA group.

Job Description
Performs thermal analysis at both the detailed component level and at the systems level. Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering

10 years demonstrated ability to perform system-level thermal analyses.

Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.

Ability to build analysis models and tools based on program needs.

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.

Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.

Demonstrated proficiency applying analysis results to hardware solutions is desirable

Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.

Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Location: Denver, CO
Per Diem: possible
Overtime: possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Scott
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Maker / no clearance / tool and die or jig and fixture / form block template making / hand tools and Shop Machinery / Blueprint reading / metrology (i.e. Laser tracker, measuring devices) / 10 openings! URGENT URGENT CA

Description:
160049
Requirement #AERO-REQ-0623
Work Location Palmdale, CA
Work Week 9/80-A
Priority High

Number of Resources 10



Title: Tool Maker

Description

Plans the job, determines methods and sequence of operations, makes layouts, fabricates, assembles and proves complex tools and dies such as tool masters, master tooling gauges, deep draw, multiple, cam action and compound dies and constructs all types of sizes of major jigs, fixtures, tool masters, master tooling gauges and related tooling, where critical reference points, surfaces, locators and tooling holes must be established and coordinated among three or more nonparallel planes or two or more radial profiles, and it is required to exercise a complete knowledge of jig and fixture building, tool and die making, and machine shop theory and practice, including the principles and use of applicable optical equipment; prepares the breakdown of all types and sizes of major jigs and fixtures, tool masters or master tooling gauges into components, details and accessories as required for the construction of these tools by other employees; determines the methods and sequences of fabrication and assembly, and coordinates the work of such employees; performs the final setup and assembly of components, details and accessories and follows such tools through to completion and sell-off. May develop, fabricate, and prove optical and mechanical accessories for the purpose of adapting and modifying optical instruments and similar equipment used in building and checking major tooling. Performs modification and rework of the level of difficulty of the operations described above. Demonstrates a complete understanding of the principles and use of applicable optical equipment such as theodilites and computer aided measuring equipment such as laser trackers. Must posses a minimum of four years of experience working in tool and die or jig and fixture building, form block and/or template making or equivalent.

NEED 10 RESOURCES FOR THIS POSITION.


Skill/Experience/Education
Mandatory:

Four years of experience working with tool and die or jig and fixture. Experience with form block and/or template making or equivalent. Experience with hand tools and Shop Machinery. Experience with Blueprint reading. Experience with metrology (i.e. Laser tracker, measuring devices)




Shift 1st Shift
OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 50.00 USD
5-8 YrsPay Rate: 55.00 USD
9+ YrsPay Rate: 60.00 USD
 
Job Number: JE-0623
Job Location: Palmdale, CA
Rate: 50-60/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / Product Definition - Level III

Description:
Location: Canoga Park, CA
Rate: $50.00/HR
Duration: 3+ month contract
Shift: Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates should have at least 3 years of experience **
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.


Skills:
-Must possess advanced knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-Knowledge of castings and airfoil parts is a plus.
-May require the use of various computer systems to produce data, analysis and reports.


Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
-Product Definition (Drafting) specialists will be considered with requisite modeling and drawing creation skills and appropriate education and/or experience.
 
Job Number: 8322
Job Location: Canoga Park, CA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / Product Definition - Level III URGENT CA

Description:
Job Title: Turbomachinery Mechanical Design Engineer / Product Definition - Level III

Number of Positions: 5

Remaining Positions: 4

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates should have at least 3 years of experience **





-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Must possess advanced knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-Knowledge of castings and airfoil parts is a plus.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.

-Product Definition (Drafting) specialists will be considered with requisite modeling and drawing creation skills and appropriate education and/or experience.

Skills:
Required
GEOMETRIC TOLERANCINGGEOMETRIC DIMENSIONINGAEROSPACE DESIGNCREO

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7517058
Job Location: Canoga Park, CA
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Installation Engineer III & IV - (PA)

Description:
SEVERAL OPENINGS IN RIDLEY PARK, PA.

Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.
Additionally...Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEpa
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search