Job Search Results

610 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/11/17 Sunday 02:50PM Pacific Time by ContractJobHunter. )

Listings 1 - 610

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
56190 | Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12-18
Start Date: ASAP
Input Date: 04/01/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 10/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Position : Aeronautical Engineer
Location: Fort Worth, TX
Duration: 10 months with possible extension

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Prior F-16 design experience is desired but, not required. Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired. Design expereience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary struncture) is also acceptable. Past F-22 design experience is desired.
 
Job Number: 19-05712
Job Location: Fort Worth, TX
Rate: Open
Per Diem: YES
Overtime: YES
Duration: 10 months
Start Date: ASAP
Input Date: 04/15/2019
Firm Name: ICONMA LLC
Attention: Rohit
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Our client is looking for an Aeronautical Engineer to work in Palmdale, CA! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
* Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
* Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
* Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
* Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
* Establishes structural specifications, performs stress analysis, and conducts performance tests. '

Mandatory Qualifications and Experience:
* Secret clearance with investigation in the past 5 years is required.
* Catia V5 experience is required.
* Airframe Design experience is required.

Desired Qualifications and Experience:
* Airframe Layout and preliminary design is a plus.
* Experience designing composites is a plus.
* Experience with Siemens Fibersim is a plus.
* Experience with Siemens Teamcenter is a plus.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130187
Job Location: Palmdale, CA
Duration: 1 year
Start Date: 04/10/2019
Input Date: 04/05/2019
Last Updated: 04/15/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10716
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/03/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10718
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/03/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/28/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1459-1S5 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS


Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1459-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1458-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 4: BS+16 YRS or MS+14 YRS

Experience
Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1458-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 04/18/2019
Last Updated: 07/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 3

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 3
(U.S. Citizenship Required*)
Palmdale, CA
2019-8451


Responsibilities:
• Test and develop data structures to assure accurate testing
• Design and support the production and flight test fluid conveyance routing and installation, electrical wire harness installation, and equipment installation and structural design.
• Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
• Support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
• Work production floor support from receipt of problem, coordination of answer to release of engineering change.
• Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
• Establish structural specifications, perform stress analysis, and conduct performance tests.

Qualification:
• Required – active Secret clearance with investigation in the past 5 years.
• 4-6 years’ Catia V5 experience is required.
• Airframe Design experience is required.
Preferred:
• 2-4 years’ experience in Composites & Materials
• Airframe Layout and preliminary design.
• Experience designing composites.
• Experience with Siemens Fibersim.
• Experience with Siemens Teamcenter.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 9-15 years’ experience required; or Master’s and 7-13 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8451
Job Location: Palmdale, CA
Rate: Based on experience
Duration: 52 Weeks
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 4

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 4
(U.S. Citizenship Required*)
Palmdale, CA
2019-8450

Responsibilities:
• Test and develop data structures to assure accurate testing
• Design and support the production and flight test fluid conveyance routing and installation, electrical wire harness installation, and equipment installation and structural design.
• Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
• Support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
• Work production floor support from receipt of problem, coordination of answer to release of engineering change.
• Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
• Establish structural specifications, perform stress analysis, and conduct performance tests.

Qualification:
• Required – active Secret clearance with investigation in the past 5 years.
• 6+ years’ Catia V5 experience is required.
• Airframe Design experience is required.
Preferred:
• 2-4 years’ experience in Composites & Materials
• Airframe Layout and preliminary design.
• Experience designing composites.
• Experience with Siemens Fibersim.
• Experience with Siemens Teamcenter.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s and 16 years’ experience required; or Master’s with 14 years’ experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8450
Job Location: Palmdale, CA
Rate: Based on experience
Duration: 52 Weeks, 3 Days
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@Moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer TX

Description:
1491-1 Aeronautical Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 4/26/2019
End Date: 2/28/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Prior F-16 design experience is desired but, not required. Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired. Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable. Past F-22 design experience is desired.

Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $69.00 Hourly
 
Job Number: JE-1491-1
Job Location: Fort Worth, TX
Rate: 69/hr max
Per Diem: no
Duration: 10 months
Input Date: 04/25/2019
Last Updated: 04/25/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 11/15/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 11/15/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 09/26/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. Strong technical skills aircraft Avionics/Electrical Systems
2. The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
3. Strong verbal and written communication skills.
4. Due to the nature of the work candidates must be US Citizen

Education:
1. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. See Other Requirements in Job Description.
3. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
4. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Preferred Skills:
1. Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing
2. Familiarity with Airworthiness Authority regulations and showing compliance to such regulations
 
Job Number: 10662
Job Location: Savannah, GA
Rate: $58.00 -$63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/22/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electronic Systems Engineer

Description:
Job Details
Special Missions - NON FAA - First shift is a 5 day work week, Overtime usually available.

Unique Skills
• Strong technical skills aircraft Avionics/Electrical Systems.
• The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
• Strong verbal and written communication skills.
• Due to the nature of the work candidates must be US Citizen.
• Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing.
• Familiarity with Airworthiness Authority regulations and showing compliance to such regulations.

Requirements
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-341
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/29/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Instructor

Description:
Location: Tulsa, OK
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam. Candidate will support Engineers and be expected to answer questions intelligently in a class setting. This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support the company in Oklahoma.
- CATIA v5 experienced with 5000+ hours.
- All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
- Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis.
- Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
- Quantitative experience with Geometric Dimensioning and Tolerances a plus.
- Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
- Formal Classroom instruction experience required for CATIA and PDM.

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10486
Job Location: Tulsa, OK
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/06/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/20/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Ability to obtain a secret clearance is required.

Proficient using CAD modeling tools, especially PTC Pro/e Wildfire and CREO
Must be proficient in creating complex solid models and mechanical designs using CAD systems, preferable PTC Pro-E Wildfire/CREO.
Concept / preliminary design experience
Experience in large structures and large assembly design/modeling • Knowledge of electrical components, electrical and mechanical interfaces • Experienced in the detail design of complex electrical enclosures and cabinets
 
Job Number: 3679
Job Location: MN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 04/10/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Our client is looking for a level 4 Engineer to work in Savannah, Georgia! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
* Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
* Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
* Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
* Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
* Design Engineer will be required to liaison with the shop on engineering issues.
* Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
* Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
* Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Mandatory Qualifications and Experience:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Desired Qualifications and Experience:
* Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130009
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 04/05/2019
Last Updated: 04/15/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support Trainer

Description:
Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam.
Candidate will support Engineers and be expected to answer questions intelligently in a class setting.
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.
 
Job Number: 142814
Job Location: Tulsa, Ok
Rate: 60.00
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 04/01/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designers in Tukwila, WA

Description:
EE Technical Designers Level (2, 3)

Location: Tukwila, WA
Duration: 6+ months

Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

The Electrical Engineering Technical Designer will be supporting primarily BDS and BCA programs and may need to support in an office setting as well as a factory and flight line setting.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 625-Electronic/Electrical Design
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 01/24/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Avionic Technician / 2 to 3 years’ of fighter aircraft electrical maintenance experience required - Clearance URGENT CA

Description:
164441
1657-1 Electrical/Avionic Technician
**2 to 3 years’ of fighter aircraft electrical maintenance experience required

Work Site Address: Edwards AFB, CA 93523
Max Pay Rate: $31.85/hr
Start Date: May 2019
End Date: 11 months
Position Type: Contract
2 openings

Job Summary:
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.

Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Candidate must have a minimum of 2 years’ experience in fighter aircraft electrical maintenance

Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.

F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)

In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
 
Job Number: JE-1657-1S
Job Location: Edwards AFB, CA
Rate: 31.85/hr max
Duration: 11 months
Input Date: 06/17/2019
Last Updated: 07/02/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Computer Aided Design (ECAD) Component Librarian

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Electrical Computer Aided Design (ECAD) Component Librarian
(US Citizenship Required*)
Scottsdale, AZ
2019-8434

Responsibilities:
• Create schematic symbols and footprints (cells) for parts using Mentor Graphics xDM Library tools as requested by HW designers
• Create related surface mount and through hole pad stacks, custom pad stacks for heat sinks, back drill/pressfit connector pins
• Use existing part creation processes, implement new processes to improve symbol creation/approval/release
• Work with Part request systems to manage and direct creation, approvals and status
• Interface with layout designers for PCB footprints and schematic designers for schematic symbols
• Interface with component engineering team and documentation team for new part specifications
• Interface with manufacturing engineers as needed for updates to existing library parts as needed
• Involved in all aspects of symbol development, maintenance and support of CAD library at all levels

Qualifications:
• General knowledge of design principles and techniques including computer aided design (CAD)
• Trained/ experienced in the use of current strategic CAD tools (Pro-E/Creo or Solid Works preferred)
• General knowledge of design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning &
• Tolerancing)
• Aware of simple mechanical stress; structural, thermal and tolerance analysis
• Demonstrates initiative, applies personal talent to practical solutions
• Works within the trade space defined (cost / schedule / technology)
• Applies general knowledge effectively in team environment
• Able to accept and integrate constructive feedback
• Demonstrates the ability to weigh risks and make progress in the face of uncertainty
• Willingly takes on problems and commits to solutions
• General proficiency in Microsoft Office applications
• Good written and verbal communications skills
• Fulfills role as a reliable team member and understands own role within team
• Manages time to ensure an assignment's completion
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate’s degree or equivalent is required and 1+ year of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8434
Job Location: Scottsdale, AZ
Rate: Based on experience
Duration: 12 Months
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@Moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Engineer
PRIMARY RESPONSIBILITIES INCLUDE:

• Create wiring diagrams/electrical schematics, cable assembly production drawings, cable harness installation documents, and other documentation that defines product specifications for Production
• Integrate systems into airborne platforms by researching and understanding system Interface Control Documents (ICD) as well as the platform’s technical data package and creating documentation to integrate the two
• Initiate problem solving for new product designs and as well as existing products within an airborne platform integration effort
• • Execute engineering design and development activities consistent with Customer quality, cost and schedule requirements
• Participate in design integration with customer requirements and industry standards
• Support on-site production as a liaison design engineer
• Enable, encourage, and partake in efficient and effect cross-functional communication
• Regularly communicate with Program Management to provide status, risk assessment, and appropriate intelligence to inform decision-making
• Punctuality to work each day and prepared to work scheduled work hours

ADDITIONAL RESPONSIBILITIES INCLUDE:

• Prepare material for, and conduct, periodic design reviews
• Conduct research that test and analyze the feasibility, design, operation and performance of equipment, components and systems
• Review and approve wiring diagrams/electrical schematics, cable assembly production drawings, cable harness installation documents, and other documentation that defines product specifications for Production
• Other duties as assigned
 
Input Date: 04/03/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6+ months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Required:
Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc…)

Task assignments:
- Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
- Work with a supplier to select new IDGs that fit the new engine capabilities
- Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
- Assess impacts to wires, and subsystem power feeders
- Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
- Develop Power design reports and system design budget

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 12/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certified Interconnect Designer (CID) - Electrical Designer / CAD Drafter

Description:
The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

Activities will include:
• conceptual layout,
• detailed design, and
• engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
• Interfacing with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
• Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
• Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
• Performing specialized electrical design computations and analysis
• Preparing diagrams and PCB design schedule estimations.
• Coordinating electrical design work with Electrical Design Engineers
• Collecting background information and helping write specifications and electrical design practices
• New product development from concept through production
• Processing documents through document change system

Required Qualifications:
• IPC Certified Interconnect Designer (CID), as a minimum.
• Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
• Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
• Thorough knowledge of Cadence Library manager.
• Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
• Full understanding of PCB, FAB and CCA manufacturing processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
• Must be a US Citizen or US person.

Preferred Qualifications:
• IPC Advanced Certified Interconnect Designer (CID+).
• Experience with Siemens Teamcenter PLM Software.
• Knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience
• Knowledge of and the use of Hierarchal schematic blocks
• Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
• Experience with Microsoft Visio
 
Job Number: 1910100867
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Description:
Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems. Determines design approaches and parameters. Analyzes electrical requirements to determine feasibility of design within time and cost constraints. May use high level programming language to configure programmable logic devices. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. Able to identify component operational characteristics that may impact system performance and or sustainability. May also review vendor capability to support development. Includes the application of specialized skill sets including digital, FPGA, DSP, CCA, power, antenna, RF and control systems knowledge as required.

Senior professional with strong knowledge of job area and broad knowledge of project management.
Manages complex projects or processes with general oversight.
Communicates within and outside of own function to gain cooperation on operational processes, practices, and procedures.
Makes moderate to substantial improvements to systems and processes.
Contributes to achievement of departmental goals and operating plans with direct impact on the departmental results.

Minimum Degree Required:
Bachelor's degree
 
Job Number: FL48455
Job Location: Palm Bay, FL
Rate: 50.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 04/11/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Description:
AutoCad required. CHS experience preferred. 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:

Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Advanced degree in engineering or related curriculum preferred

The Structures Company is an AA/EOE.
 
Job Number: 289
Job Location: GA
Rate: Up to $68/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 06/06/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Using Vivado for xilinx and Mentor Graphics Pads logic
Video processing or Camera/Optical development a plus
Current CAD tools for schematic capture, circuit simulation and design verification
Understanding of issues relating to digital design, imaging, timing, synthesis etc.
FPGA firmware development using VHDL
Video processing or Camera/Optical development
 
Job Number: 46392
Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 04/30/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Duration: 5 month contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
- The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
- Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
- Experience with System Integration of Hardware in a simulation test environment is desired.
- Able to evaluate electrical wiring and harness assembly diagram for build and integration.
- Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Make real-time design modification to resolve issues, and update design documents to reflect changes.
-Able to work in a Shop (Prototype) environment and with interacting with technicians.

Duties include:
- Creating wiring diagrams and harness assembly diagrams
- Resolving wiring/integration related issues between the various avionics/electrical systems
- Validating/interpreting/troubleshooting/resolving any wiring related issues
- Performing technical checks to ensure wiring document correctness
- Providing engineering sign-off on all new/revised manufacturing wiring documents
- Termination Aids (TAs) and Wire Harness Master (WHM) sketches

Education:
- Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
- Experience with Design, Implementation and Test experience with aircraft harnesses required.
 
Job Number: 10234
Job Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 04/22/2019
Last Updated: 09/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required. CHS experience preferred
2. Company Completions electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing, and routing required.
7. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8. Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10651
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/20/2019
Last Updated: 05/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Detail oriented engineer with experience in the design of cables and harnesses for high reliability applications in harsh environments. AutoCAD required. The engineer shall work under the direction of a design lead, and create cable and harness assembly designs using MIL-SPEC components. Select the appropriate components including connectors, backshells, and cable. Perform analysis to determine the appropriate strain relief and sealing sizes. Create detailed design assembly drawings. Work with 3D routing modeler on the installation plan. Create wirelists and schematics. Update system level and hardware schematics. Create reference designator marking methods. Perform the proper wire shield termination for EMI/TEMPEST control.

Skill/Experience/Education:
Mandatory:
AutoCAD. Knowledge of Cable Design

Desired:
Experience in Marine Applications. . Experience in undersea molded cable assemblies, potting compounds, fiber optics, Oil Filled pressure tolerant cable assemblies is also desired.
 
Job Number: 18867
Job Location: West Palm Beach, FL
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 11/08/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 11/17/2019
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer (2) - SC

Description:
Chipton-Ross is seeking 2 Electrical Engineers located in Greenville, SC

RESPONSIBILITIES:
looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.
The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations.

REQUIRED EXPERIENCE:
Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
"Must be experienced with Engineering design software for electrical design.
"Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations
"Experience with aircraft architectures and electrical integration of avionics subsystems

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

WORK HOURS:
Full-Time/First Shift 0630-1600

 
Job Number: 176357
Job Location: Greenville, SC
Rate: $DOE
Duration: 12 MONTHS
Input Date: 04/04/2019
Last Updated: 11/17/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - AutoCAD

Description:
1) AutoCad required. CHS experience preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.
 
Job Number: 19-144018
Job Location: GA
Rate: $68.00
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/03/2019
Last Updated: 05/14/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Centennial, CO
$34.50/hr - $57.56/hr
9 month contract
First Shift
Possible Travel
*Must Be a U.S. Citizen*

Description:
-5+ years’ experience
-Aerospace experience required
-Bachelors degree required

Main task will be to provide technical system engineering support to existing electrical ground command and control systems. This position will be based in Denver with potential trips to Cape Canaveral Air Force Station and Vandenberg Air Force base.

Perform system level research and analysis of electrical interfaces for ground systems Commercial-Off-The-Shelf (COTS) hardware for command, control, communications and instrumentation systems, stand-alone Test Equipment systems, avionics systems and electro-mechanical interfacing devices. Duties include research and analysis of engineering drawings that include hardware at our launch sites located in Florida and California, in the Denver laboratories and implementation of data into a parameters database.

Tasks can vary from analysis of components in electrical equipment racks, electrical interface analysis of solenoid valves, I/P valves, various transducers, as well as avionics interface requirements. Many of our tasks involve instrumentation activities including interfacing to various types of transducers and understanding high-channel count Data Acquisition Systems (DAS), DC power systems, and analog/digital input/output hardware. Tasks also include creation and/or maintenance of all ground electrical design requirements documents, including validation and verification of requirements.
 
Job Number: 10760
Job Location: Centennial, CO
Rate: 34-57
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/09/2019
Last Updated: 04/29/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Propulsion Experience Needed

Description:
Description:
Responsible for the design, testing and certification of engine electrical systems and harnesses.

Requirements:
• Must have aircraft engine experience
• Must have aircraft EBU experience
• Must have commercial aircraft experience, preferably Airbus
• Must have experience designing and testing engine wire harnesses
• Must have experience with CAD software such as Catia V5, Mentor Graphics, EWIS, etc.
• DO-178 or DO-254 Certification
• Electric Actuation and Propulsion
• Vehicle Communications System
• MS Office, Project and MS Visio

The Structures Company is an AA/EOE.
 
Job Number: 294
Job Location: OK
Rate: $75/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/10/2019
Last Updated: 05/01/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / wiring harness - Clearance CA

Description:
1302-1 Electrical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/30/2019
End Date: 9/27/2019

Job Description:
Designs and tests Electrical system, components, equipment, and networks for Military air vehicle. The applicant must have extensive experience in Wiring Harness Design, Build, and Test. Considered a Subject Matter Expert (SME) in the area of Harness Design and Build. Experience with System Integration of Hardware in a simulation test environment is desired. Able to evaluate electrical wiring and harness assembly diagram for build and integration. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents, Termination Aids (TAs) and Wire Harness Master (WHM) sketches. Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Aero Specifications. Make real-time design modification to resolve issues, and update design documents to reflect changes. Able to work in a Shop (Prototype) environment and with interacting with technicians.


Candidate will work first shift

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $70.00 Hourly
 
Job Number: JE-1302-1S5
Job Location: Palmdale, CA
Rate: 70/hr max
Per Diem: no
Duration: 6 months +
Input Date: 07/12/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Design 2 / no clearance / URGENT CA

Description:
Electrical Engineer Design 2 (Job Number: 19006187)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: Apr 29, 2019

Target End Date: Apr 24, 2020

Pay Rate: $42 top $44/hr
Location: Manhattan Beach, CA
Work Schedule: 9/80
Duration: 1 Year

NEED CANDIDATES IMMEDIATELY - PLEASE RUSH!

Job Description:

The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.

Basic Qualifications:

- 2 Years with Bachelors in Science; 0 Years with Masters; 0 Years with PhD.

- Demonstrated proficiency using digital test equipment

- Demonstrated proficiency developing digital electronics
 
Job Number: JK-1747
Job Location: Manhattan Beach, CA
Rate: 42-44/hr max
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 06/12/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Design 3 CA

Description:
Electrical Engineer Design 3 (Job Number: 19006196)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach

United States-California-Redondo Beach
Shift: 1st Shift

Target Start Date: Apr 29, 2019
Target End Date: Apr 24, 2020

Pay Rate: $52 to $54/hr
Location: Manhattan Beach, CA
Work Schedule: 9/80
Duration: 1 Year

Security Clearance: N/A

NEED CANDIDATES IMMEDIATELY - PLEASE RUSH!

Job Description:

The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.

Basic Qualifications:

- 5 Years with Bachelors in Science; 3 Years with Masters; 1 Years with PhD.
- Demonstrated proficiency using digital test equipment
- Demonstrated proficiency developing digital electronics
 
Job Number: MB-1737
Job Location: Manhattan Beach, CA
Rate: 54/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 05/24/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( New Church, VA ) 8027260

Description:
Electrical Engineer III ( New Church, VA ) 8027260
12 Month Contract

Pay rate: $50/hr w2 , maybe more for the right candidate.


Integration & Test Electrical Engineer will support the Antares Spacelift Program. The Antares Program launches spacelift vehicles out of Wallops, VA, to delivery supplies and scientific equipment to the Space Station. The Integration & Test Engineer will manage assembly, integration, and test of space launch vehicle flight hardware at the Wallops launch site. Specific duties include hands-on electrical integration of flight hardware, developing/maintaining processes and procedures for vehicle assembly and vehicle testing, hands-on electrical testing of flight hardware, and documenting and pursuing root cause of discrepancies found with hardware.
• Bachelors Degree (BS) in Electrical Engineering • 10 years of electrical hands-on integration & test or related experience is required • Experience with rocket systems is required

JOB DESCRIPTION:
• Need a strong Integration & Test Electrical Engineer with rocket systems experience. 10 years of hands-on integration & test experience in a fast paced environment.
Top three skills:
• Hands-on Electrical integration of flight hardware & testing of flight hardware
• Bachelors Degree (BS) in Electrical Engineering
• Developing processes and procedure
 
Job Number: 8027260
Job Location: New Church, VA
Rate: 50
Per Diem: yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 04/12/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 11/15/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering – RS 3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Electrical Engineering – RS 3
(U.S. Citizenship or Green Card Required*)
Centennial, CO
2019-8526

Responsibilities:
• Provide technical system engineering support to existing electrical ground command and control systems.
• Perform system level research and analysis of electrical interfaces for ground systems Commercial-Off-The-Shelf (COTS) hardware for command, control, communications and instrumentation systems, stand-alone Test Equipment systems, avionics systems and electro-mechanical interfacing devices.
• Research and analysis of engineering drawings that include hardware at our launch sites in laboratories.
• Implementation of data into a parameters database.
• Analysis of components in electrical equipment racks, electrical interface analysis of solenoid valves, I/P valves, various transducers, as well as avionics interface requirements.
• Interfacing to various types of transducers and understanding high-channel count Data Acquisition Systems (DAS), DC power systems, and analog/digital input/output hardware.
• Creation and/or maintenance of all ground electrical design requirements documents, including validation and verification of requirements.

Qualification:
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• 5+ years’ experience
• Bachelors Degree

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8526
Job Location: Centennial, CO
Rate: Based on experience
Duration: 9 Months
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical FPGA Design Engineer

Description:
Description:

" Develop FPGAs for space-based applications

" Understand, develop, and document requirements for space-grade FPGA designs

" Perform FPGA Design: Architecture development, algorithm implementation, synthesizable VHDL code generation

" Perform FPGA Design Verification: Testbench development, scripting, VHDL simulation

" Perform FPGA Design Implementation: Constraint driven FPGA Synthesis, place and route, static timing analysis

" Generate design review and deliverable documentation including: review packages, block diagrams, interface control documents, test procedures, requirements verification matrices, and test plans/procedures.

" Conduct design peer reviews at various phases in the development process



Required Experience:

" BS Degree Electrical Engineering or Computer Engineering with 2+ years of relevant experience

" Thorough understanding of VHDL, the FPGA design process and the tools used to generate the FPGA designs



Desired Skills:

" Experience with Questasim, Synopsys Synplify, Xilinx FPGA tools, Microsemi FPGA tools

" Experience building FPGAs with difficult timing and/or difficult routing constraints

" Experience with high speed memory and/or high speed SERDES interfaces

" Experience with Analog to Digital (AD) and Digital to Analog (DA) interfaces

" Proficiency managing source code using revision control

" Self-motivated individual with the ability to work and communicate effectively in a team environment



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-07063
Job Location: Rochester, NY
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: YES
Duration: 2019-09-06 00:00:00.0
Start Date: 2019-03-04 00:00:00.0
Input Date: 02/19/2019
Last Updated: 04/17/2019
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model.

The candidate will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: •Mentoring Manufacturing Engineering Associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
•Developing the specific methods and instructions for manufacture and/or assembly of products.
•Determining manufacturing feasibility to: •Identify potential fabrication problems,
•Draw attention to special fabrication requirements and
•Ensure the latest developments in manufacturing technology are considered in the design phase.

•Establish design inherent cost targets which reflect hardware target cost.
The Manufacturing Engineer: •works with the design team to ensure that the proposed design is within the allowable cost.
•participates in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
•establishes touch labor cost targets on shop/lab activities as requested.
•defines tool and gauge requirements.
•provides the necessary input and support to the tool design group.
•ensures adequate tools and gauges are available when needed in the process.
•works with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
•provides support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
•reviews and implements engineering changes to determine feasibility, producibility and delta cost impact.
•determines, implements and leads process improvement opportunities, business unit initiatives and corrective actions.
•leads efforts to understand non-conformances and reduce Cost of Poor Quality.
•leads 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications •BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
•5+ years of experience required.
Experience/Qualifications •Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
•Background courses in electrical design and/or manufacturing are desired.
•Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
•Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
•Knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, etc.) required.
•Basic knowledge of harnessing (wires/cables, crimping, etc.) and circuit boards (components, layout, etc.) preferred.
 
Job Number: 1910099480
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

*Job Description
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.

Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

*Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
5+ years of experience required.

*Experience/Qualifications
-Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
-Background courses in electrical design and/or manufacturing are desired.
-Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
-Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Basic knowledge of harnessing (wires/cables, crimping, etc.) and circuit boards (components, layout, etc.) preferred.
 
Job Number: 10604
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/12/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness/Equipment Installation/Structural Design Engineers - Excellent Rates

Description:
*Must have Active Secret Clearance
*Catia V5
*Engineering Degree
*Composites & Materials
*Airframe Design Exp. Required
*Fibersim and/or Teamcenter is a plus
*responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Electrical Wire
Job Location: Palmdale, CA
Rate: up to $140.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 04/02/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness/Equipment Installation/Structural Design Engineers - Excellent Rates

Description:
*Must have Active Secret Clearance
*Catia V5
*Engineering Degree
*Composites & Materials
*Airframe Design Exp. Required
*Fibersim and/or Teamcenter is a plus
*responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Electrical Wire
Job Location: Palmdale, CA
Rate: up to $140.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 04/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical harness/cable engineer

Description:
Seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.

Other job responsibilities may include
• Provides guidance in the development of cable/wire harness detail and assembly designs.
• Provides guidance in the development of electrical product detail, assembly and installation designs.
• Provides direction used by multiple teams to analyze complex results and performs design reviews.
• Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
• Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
• Directs the technical review of supplier capabilities to facilitate source selection.
• Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
• Works under consultative mentorship

Education/experience:
BDegree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Active U.S. Security Clearance is A Plus
Previous experience in the defense or aerospace industry
Previous experience in Electrical Harness/Cable/Wire Design and Routing
 
Job Number: Harness_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical, Electronic and Electro-mechanical Components Engineer

Description:
Electrical, Electronic and Electro-mechanical (EEE) Components Engineer

Location: Grand Prairie, TX (75051)

9 month contract

Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX. The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electro mechanical components used in military applications. The selected Candidate should be a self-starter, capable of handling several tasks at once. The selected candidate must be able to work without supervision. Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.

Skill/Experience/Education
Mandatory: Must be able to obtain a security clearance.
Must be proficient with computer tools such as MS Excel and Access.
Candidate should have experience in electrical component manufacturing process and physical property analysis.
This position requires periodic travel to both the customer and supplier locations.

Desired-
The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
Experience in Components Engineering with broad knowledge of electronic components and devices.
The ideal candidate has experience working electrical components on a Production Program.
Experience in the disposition of Q-Notes.
Experience with parts release process, and with formal Configuration Board support.
Experience working with Global Supply Chain, Quality and Manufacturing groups.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56604
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9+ months
Start Date: 04/22/19
Input Date: 04/11/2019
Last Updated: 05/20/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 11/15/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education/experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ESDE_OK
Job Location: Oklahoma City, OK, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

Description:
Electronics Design and Analysis Engr 5- PCB Designer

Location: El Segundo, CA
Duration: 12+ Months

Job Description:
Mentor Expedition Printed Circuit Board (PCB) Designer
The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
Ensure that all requirements for manufacturing and assembly are met.
Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
Make schematic updates based upon changes from electrical engineers.

Qualifications:
• 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
• Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
Must be proficient with:
• Verifying design using Design Rule Check.
• Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
• Utilizing Constraint Manager to define substrate and routing constraints.
• Establishing rule areas that define specific route rules for different portions of the board.
• Routing using both manual/interactive and automatic tools.
• Working with different via structures.
• Generating plane data.

Skill Code: 624-Electronic Packaging Design
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 01/02/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 11/15/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 3

Description:
Electrophysics Engr/Scien 3

Location: Oklahoma City, OK
Duration: 6 months

Description:
OKC Electromagnetic Effects Group is seeking experienced electromagnetic effects engineer. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with:
- Reviewing supplier and partner qualification data
- Nuclear Hardening analysis and test
- EMI/C analysis and test
- EMSEC/TEMPEST analysis and test
- HIRF/Lightning analysis and test
- RF Co-Site analysis
- Antenna Coupling analysis
- Electrical Power Quality and Load analysis
- Test Automation for aircraft modifications.

Other job responsibilities may include:
- Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
- Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
- Develops architectures to integrate systems and components into higher level systems and platforms
- Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
- Defines and conducts tests to validate performance of designs to requirements
- Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
- Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested
- Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
- Writes appropriate sections of proposals to support development of new business
- Works under general mentorship.

Skill Code: 62Q-Electromagnetic Compatibility

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Please share updated resume at ravi@iconma.com
 
Job Number: 19-03720
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 03/28/2019
Last Updated: 04/09/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Circuit Designer 4 CA

Description:
Engineer Circuit Designer 4 (Job Number: 19005125)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Apr 29, 2019

Target End Date: Oct 25, 2019

Pay Rate: $68 to $72/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 month

Job Description:


Qualified applicant to support electronics modernization effort. The SOW include performing detail electrical circuit design, circuit level analysis, support qualification testing, preparing ATP and QTP and support electrical circuit and LRU manufacturing.


Basic Qualifications:

9+ years experience with Electrical Engineering Bachelor’s Degree or an equivalency of 17 years plus High School Diploma.

Digital, analog and power circuit design experience
•Experience with OrCAD/pspice
•Experience with PCB troubleshooting
•Experience with PCB layout and routing
•Strong verbal and written communications



Preferred Qualifications:

Working knowledge of engineering practices/procedures regarding electronic components
 
Job Number: MB-1733
Job Location: San Diego, CA
Rate: 72/hr max
Per Diem: no
Duration: 6 months
Input Date: 02/15/2019
Last Updated: 05/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer IV

Description:
Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Duration: 1 year contract
Shift: 9/80 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**Candidates should have experience specifically with flight electronics packaging for space applications**
**Candidates should have design experience of electro-mechanical packaging or cable harnesses**

Duties:
- Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs
- Candidates should have experience specifically with flight electronics packaging for space applications
- Candidates should have design experience of electro-mechanical packaging or cable harnesses
- Perform engineering design tasks related to space electronics based products.
- Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.

Skills:
- Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application.
- Proficiency in generating drawings is required.
- Familiarity with aerospace/defense engineering design and production processes and disciplines.
- Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
- Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
- Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
- Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

Education:
- Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics.
- Willing to accept experience in lieu of Bachelor's Degree.
 
Job Number: 10655
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/20/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist, Fire Control - Tracked Combat Vehicles

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineering Specialist, Fire Control - Tracked Combat Vehicles
(U.S. Citizenship Required*)
Sterling Heights, MI
2019-8535

Responsibilities:
• Design circuit cards and/or electronics.
• Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
• Component selection, procurement, and oversight of hardware build.
• Create circuit board specifications, ICD's, and test plans.
• Review and develop hardware and software requirement documents and test plans.
• Design utilizing high and low speed digital communications standards such as: EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet.
• Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
• Support the integration & testing of electrical control devices and sights and sensors on the various vehicle platforms.
• Work with other members of the engineering staff to ensure the product meets its requirements.
• Prepare and present written reports, status reports, and presentations as necessary.
• Provide technical support and communication to the program office, customers, and other internal departments.

Qualifications:
• Capable of Obtaining a Security Clearance preferred.
• Experience with Microsoft Office.
• Experience with Analog and Digital Circuit Design, including PCB design.
• Experience with Microcontrollers.
• Design of high and low speed digital communications design using EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet AVB.
• Experience with Analog and Digital Video Circuits (RS-170, HD-SDI, LVDS, DVI, DisplayPort).
• Experience with video distribution techniques preferred.
• Familiarity with Military Standards and test requirements.
• Able to use engineering development and Tools.
• Occasional overtime, and weekend hours may be required to complete critical tasks.
• Strong Interpersonal skills, able to work with interdisciplinary teams, and strong multi-tasking skills.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree in Electrical Engineering with 10+ years of applicable experience. Other technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8535
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist, Fire Control – Tracked Combat Vehicles

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineering Specialist, Fire Control – Tracked Combat Vehicles
(U.S. Citizenship Required*)
Sterling Heights, MI
2019-8492

Responsibilities:
• Design circuit cards and/or electronics.
• Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
• Component selection, procurement, and oversight of hardware build.
• Create circuit board specifications, ICD's, and test plans.
• Review and develop hardware and software requirement documents and test plans.
• Design utilizing high and low speed digital communications standards such as: EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet.
• Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
• Support the integration & testing of electrical control devices and sights and sensors on the various vehicle platforms.
• Work with other members of the engineering staff to ensure the product meets its requirements.
• Prepare and present written reports, status reports, and presentations as necessary.
• Provide technical support and communication to the program office, customers, and other departments.

Qualifications:
• Required – able to obtain secret clearance.
• Experience with Microsoft Office.
• Experience with Analog and Digital Circuit Design, including PCB design.
• Experience with Microcontrollers.
• Design of high and low speed digital communications design using EIA-232, EIA-422/485, VME, CAN, Gigabit/10 Gig Ethernet, USB, TCP/IP, UDP, GigEVision, and Ethernet AVB.
• Experience with Analog and Digital Video Circuits (RS-170, HD-SDI, LVDS, DVI, DisplayPort).
• Experience with video distribution techniques preferred.
• Familiarity with Military Standards and test requirements.
• Ability to use engineering development and Tools.
• Capable of Obtaining a Security Clearance preferred.
• Occasional overtime, and weekend hours may be required to complete critical tasks.
• Strong Interpersonal skills and ability to work with interdisciplinary teams.
• Strong Multi-tasking skills.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree in Electrical Engineering with 10+ years of applicable experience.
• Other technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8492
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 9/80 Schedule
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Job Description:
- Facilities Engineering & Planning, at our clients Los Angeles Site, is looking to hire a Facilities Project Engineer with experience in managing projects for Manufacturing & Process equipment installations and Facility modifications.
- The responsibilities of this position include internal customer interface, external contractor interface, and leading Project Teams on a variety of Facilities Projects (such as purchase and installation of machinery & equipment, facilities upgrades & renovations, moves & rearrangements of office, lab and manufacturing functions, and other support).

Primarily, these responsibilities include:
- Developing and maintaining project scope, schedule, cost, AutoCAD layouts, and project specifications (20%);
- Generating and reviewing/approving work authorizations and invoices for payment (10%);
- Coordinating with Safety, Health & Environment (SH&E), Maintenance, Supply Management, Finance, and others for the successful planning, implementation, and completion of assigned projects (40%);
- Oversight of service and construction contractors (30%)

Skills:
- High level of Safety and Customer focus.
- Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
- Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
- Knowledge of local Building codes and AutoCAD preferred.

Education:
- BA/BS degree in Industrial, Mechanical, Electrical, Civil, Structural Engineering or Architecture and 9+ years related experience.
- High level of Safety and Customer focus.
- Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
- Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
- Knowledge of local Building codes and AutoCAD preferred.
 
Job Number: 10764
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Maintenance Planner

Description:
Location: Vandenberg AFB (Lompoc), CA
Rate: $30.50/HR
Duration: 1 year contract

****MUST be a U.S. Citizen or Permanent Resident****

Requirements:
1. Seeking an organized detailed oriented individual who can work successfully in a dynamic launch site environment.
2. Seeking an individual who can work well alone or as part of a team.
3. Required to be proficient in a computer related field. Information Technology, Programming, or other Database Management field.
4. Looking of 3+ yrs of experience.
5. EAM / 7i experience desired.
6. Database management and experience preferred.
7. Attention to detail and consistency are pivotal for proper database management.

Job Description:
1. Member of our clients Operations Engineering and Infrastructure (E&I) organization, whose responsibilities include the design, operation, maintenance, and system evolution of all launch site facility and facility support systems, including Environmental Control & HVAC, Facility Electrical/Power, Communications and Data Networks, and Structural/Mechanical ground systems.

Maintenance Planning Role:
1. Identifies, coordinates, plans, schedules and executes preventive and predictive maintenance for facilities equipment, tooling and machinery.
2. Recommends modifications of existing equipment and facilities and the possible replacement of existing equipment, which will improve operations and reduce maintenance costs.
3. Ensures maintenance of records to document safe and efficient operation of equipment and facilities.

Responsibilities:
1. Responsibilities include planning and scheduling of facility maintenance tasks associated with Launch sites at VAFB.
2. Communicates with Engineering and Technicians to ensure accurate and timely maintenance.
3. Provides work orders to execute on-time support required for testing/launch processing activities for 100% Mission Success.
4. Supports commonality of Maintenance planning processes across all product lines and work locations.
5. Provides accurate metrics of maintenance activities to support management reviews and presentations. 6. Support and manage electronic files to ensure security and integrity of the work being generated.
7. Assists Engineering with procedure creation and/or update existing documents to meet organizational goals.
8. Must have excellent communication, writing, and oral skills and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
9. Proficient knowledge in Microsoft Office Suite.

Education:
1. Requires a bachelor’s degree and 2 - 6 years of experience
 
Job Number: 10625
Job Location: Lompoc, CA
Rate: $30.50/HR
Per Diem: Split Possible
Duration: 1 yr
Input Date: 03/13/2019
Last Updated: 04/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility and Design Engineer

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Facility and Design Engineer
(U.S. Citizenship or Green Card Required*)
Vandenberg AFB, CA
2019-8391

Responsibilities:
• The Facility and Design Engineer will support repairs, modifications, and new designs of launch facilities in support of client Atlas V and Delta IV Launch Operations and Vandenberg Air Force Base California as part of client’s Engineering and Infrastructure Team. The successful candidate will provide engineering and management support of SLC-3 / Atlas V, SLC6 / Delta IV, and other associated facilities. The engineering and management support will include, but is not limited to: architectural, HVAC, electrical, civil, structural and mechanical systems, maintenance and facility corrosion control activities.

• The Candidate will coordinate the procurement of facility services, equipment, and will perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance. The Candidate will perform investigation of anomalies encountered and will be responsible for developing corrective action plans and work documents for both client and sub-contractor support. The Candidate will work with various government groups including Air Force and Base Civil Engineering personnel.

• The successful candidate shall prepare Statements of Work with detailed contractor direction, and manage contractor’s activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs/modifications.

• In addition, the candidate will gather information, perform field walk-downs, and create, schedule and manage the performance of maintenance and/or corrective Work Orders performed by client represented personnel. Support will also include schedule integration and coordination of maintenance activities around launch processing activities. Candidate shall have relevant facility engineering experience with an emphasis on architectural facility/building systems operations/modifications.

• The candidate shall perform engineering calculations, trade-studies, designs, evaluations, and rough cost estimates in support of the above engineering activities.

Qualification:
• Must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members including client represented personnel, customers and subcontractors.
• Ability to solve practical problems. Able to analyze and interpret data to make sound judgments and recommendations. Ability to learn and interpret mechanical and electrical drawings, logic diagrams and technical manuals.
• Basic experience with AutoCAD, create/revise engineering drawings as required.
• Proficient knowledge in Microsoft Office suite.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree from an accredited college in an Engineering or related discipline, or equivalent, with a minimum 3 yrs of professional experience.
• Experience with facilities engineering and plant operations.
• Experience working independently and in a team environment, with both represented and contractor personnel.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8391
Job Location: Vandenberg AFB, CA
Rate: Based on experience
Duration: 12 Months
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware engineer

Description:
Seeking an Electrical Design & Analysis Engineer with an emphasis on firmware development to join the Advanced Navigation and Processors team.

Position Responsibilities:
Your duties as a firmware engineer will include (but are not limited to):
• Develop and maintain detailed requirements and specifications for FPGAs (Field Programmable Gate Array) and/or SoCs (System on Chip) implemented on processing platforms.
• Provide engineering support throughout the lifecycle of the processor circuit card assembly (CCA) design, conduct trade studies and literature research to support future product designs

Looking for candidates with experience in the following areas:
• Electrical / electronics engineer for VHDL coding of Field Programmable Gate Arrays (FPGA) and SoCs
• Design experience and implementation of high-performance digital signal processing hardware using FPGAs.
• Build and use of verification test benches
• Experience with Xilinx and/or Altera devices and tools such as Xilinx Vivado and ChipScope are desired.
• Hands-on experience of programming over JTAG and bring-up in a lab environment, gathering data for technical performance measures and performing basic analysis.
• Basic understanding of the following interfaces: RS-232, RS-422, RS-485, UART, PCIe, Ethernet, 1553 bus, CAN bus, AXI bus interface (xilinx specific), memory interfaces (nand flash, DDR2, DDR3)
• Version control utilities

Education:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: FIRMWARE2019
Job Location: Saint Charles, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 04/12/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 03/07/2019
Last Updated: 04/23/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/15/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
This can involve testing, data analysis, and interface with all aspects of the engineering department.
Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing,Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.
Experience with advanced electrical instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: CT48505
Job Location: Windsor Locks, CT, CT
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 04/05/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Product Design Engineer 4 / CREO / Electromechanical design URGENT CA

Description:
162029

Ground Product Design Engineer 4 (Job Number: 18000483)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Title: Ground Product Design Engineer 4

Rate: 62 - $67/hour

Location: Redondo Beach, CA

Positions: 1

Duration: 1 Year

Shift: 1st Shift - 9/80

We are currently seeking a Design Engineer to support test set development for EPS-R. Position will require selected candidate to create, modify and maintain drawings of electrical test equipment which includes, but not limited to custom test units, custom drawers and test cables. The selected candidate will be responsible for drawing documentation, design updates and working with mechanical and electrical engineers. Selected candidate must be adept at working independently as well as in a collaborative team environment. Candidate should be able to communicate well verbally and written, and be attentive to detail.


Basic Qualifications:

•Minimum 5 years of experience working in industry
•Experienced in ProE/CREO
•Knowledge with electro-mechanical design/products


Preferred Qualifications:

•AutoCAD
 
Job Number: MB-1657ATO
Job Location: Redondo Beach, CA
Rate: 67/hr max
Per Diem: no
Duration: 1 year
Input Date: 04/29/2019
Last Updated: 05/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Test Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Hardware Test Engineer
(US Citizenship Required*)
Scottsdale, AZ
2019-8463

Join our Concurrent Engineering Team as they work products through design verification, qualification, and production readiness before starting production of Secure RF and Digital Products. You will support troubleshooting, data analysis, and continuous improvement for the tests and for the product.

Responsibilities:
• Participate in planning technical approaches, resources, schedule, budget and equipment required for testing and evaluating new systems, products and special devices
• Conduct tests to evaluate hardware performance and execute to the test plan
• Understand complex test systems using schematics and wiring diagrams
• Understand test requirements and develop procedures
• Operate special test equipment (STE) console and direct a team of technicians to execute test processes.
• Lead technical tasks for small teams or projects
• Analyze and review data to ensure that hardware is operating as expected utilizing numerical data analysis tools to interpret test results
• Coordinate with the design engineers to highlight problems and suggest areas for improvement
• Create the software tools to further enhance post-test data analysis
• Provide reports and document test results - presentation of test data to peers and customers required
• Frequent contact with managers within and outside of Engineering, along with regular communication with the Customer

Qualifications:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Highly proficient use and understanding of test engineering concepts, principles, and theories
• Strong background in electrical test techniques
• Knowledgeable in using test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in Engineering, a related specialized area or field is required (or equivalent experience) with 2+ years of relevant experience; or Master's degree
• BSEE Preferred

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8463
Job Location: Scottsdale, AZ
Rate: Based on experience
Duration: 12 Months
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 12/04/2018
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1910100719
Job Location: De Pere, WI
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 11/15/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ckOQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Electrician

Description:
Direct hire opportunity in Casa Grande for an electrician to work within a manufacturing environment.

HS diploma or GED

minimum 5 years experience as qualified journeyman level Electrician or Electronic Technician in manufacturing

6am-6pm Th, Fr, Sa and every other Sunday

  • Installs and maintains 480, 240, 120 AC systems and low voltage electrical systems.

  • Interprets and follows electronic drawings, schematics, P&IDs, and simple ladder logic.

  • Disassembles equipment as necessary and repair or replace faulty components.

  • Makes electrical and electronic repairs or improvements to a variety of process controls, unit operations, and equipment.

  • Analyzes deficiencies in electrical and electronic equipment to determine cause of problems.

  • Installs, trouble shoots and maintains motor controls, S.C.R. drives, dielectric heating presses, pulse counters, pH monitor, electronic controls on oven presses and all other electrical and electronic equipment used in plant.

  • Maintains, repairs, and installs new gas trains and burners.

  • Fabricates replacement parts and supports.

  • Services and repairs lift trucks and other powered carts as necessary.

  • Participates in writing and constructing job plans, preventative maintenance procedures and root cause analysis.

  • Works on weekends and holidays when requested.

  • Must have full working set of essential electrician tools.

  • Ensures that products meet customer specifications and expectations.

  • Works in a team environment to reach consensus decisions within the guidelines and boundaries established by the company, and maintains constructive relationships with co-workers.

  • Operates at all times in compliance with the Quality System and Quality Policy.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-11085
Job Location: Casa Grande, AZ
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-04-01 00:00:00.0
Input Date: 03/18/2019
Last Updated: 04/23/2019
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/04/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intermediate Design Engineer – Mechanical

Description:
Our client is North America’s leading manufacturer of transit buses. Designed and “built with the future in mind,” these fuel-efficient and zero-emission buses help communities achieve their transit energy goals. Build on your own future by applying to work with us.

Intermediate Design Engineer – Mechanical
Anniston AL
2019-8480

Join our team to take projects from concept to production, including design tasks and releasing Bills of Materials. You will keep track of all the calculations, communications, drawings, and changes for your projects.

Responsibilities:
• Create designs that meet our customers’ specifications while staying within our company’s manufacturing abilities. Calculate & analyze to ensure the engineering designs comply with all the criteria & regulations.
• Test, or initiate testing of, components and installations to verify that everything fits, works, is reliable, and meets our contractual obligations.
• Coordinate your tasks to make sure everything stays on schedule, keeping in mind vendor and production lead times. You’ll keep updating task status and recording time on each task.
• Assist designers or drafts-persons on tasks as needed.
• Interact with vendors and customers on design related issues.
• Check Engineering Documents, instructions to service, shop floor instructions, and others as authorized.
• Lend your Engineering knowledge and abilities to help Production, Quality Assurance, Customer Service Support, and other departments as needed.
• Travel as needed

Qualifications:
• Proficient in CAD and Unigraphics.
• Experience in drafting.
• Strong team work and problem solving
• Motivated self-starter who takes initiative and works well independently.
• Able to multitask and work efficiently in a fast paced, high-demand work environment
• Strong written & verbal communication skills
Preferred:
• NX(Unigraphics), Teamcenter, MATLAB/Simulink, Solidworks, Fortran, Mathcad, and/or LabVIEW.
• Experience in Mechanical Design and/or Experimental Testing/Research.
• Data Processing and/or Analysis skills or experience.

Education and Experience:
• Bachelor’s from an Engineering technical institute as a draftsperson or technologist in Electrical or Mechanical, with 5-10 yrs. experience; or, Master’s with 2+ years of experience.

Moseley Technical Services, Inc. and our client are AA/EEO/Veterans/Disabled Employers.
 
Job Number: 2019-8480
Job Location: Anniston, AL
Rate: Based on experience
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Job Opening for Manufacturing Planner

Description:
Manufacturing Planner 5

Location: Berkeley, MO
Duration: 1 year

Description:
Plans and leads teams that support implementation of strategic business initiatives and manufacturing and tooling enhancements. Analyzes new technologies, concepts and processes that simplify and improve manufacturing processes. Supports benchmarking of industry to determine best practices. Leads integration of major, complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops unique and innovative tooling requirements in alignment with strategic initiatives. Establishes processes for managing tooling from initial design to end of use disposition. Leads investigations of critical manufacturing related issues. Develops and implements solutions involving a broad range of internal and external stakeholders. Supports benchmarking of advanced applications and methodologies to support producibility improvements. Researches and develops unique and innovative manufacturing concepts. Influences the design to ensure efficient manufacturing and optimum value. Presents business case/trade study recommendations to leadership for review. Leads development of complex work statements and sequencing of events to support delivery commitments. Performs high level analysis of schedule and work statement processes to identify and mitigate manufacturing risks. Researches, develops and implements of new manufacturing processes to support long-range goals and strategic initiatives. Works under consultative direction. Desired skills include Experience with 3D model-based instruction. Experience in use of test programs for checkout of electrical assemblies. Experience in the manufacturing build process and installation of complex wiring harness assemblies.

Education / Experience:
AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
67B-Electrical/Electronics
 
Job Location: Berkeley, MO
Per Diem: Split
Duration: 12 months
Start Date: ASAP
Input Date: 03/18/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Anusha Vuta
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/27/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 11/17/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician

Description:
Nesco has a direct hire opportunity for a maintenance technicians on 2nd & 3rd shift 

.2nd shift 2:30pm - 10pm and 3rd shift 10pm-6am



ESSENTIAL RESPONSIBILITIES & DUTIES

  • Follow all safe workplace practices, comply with all applicable safety and health rules, and actively participate in safety programs.

  • Read and interpret schematic drawings and documentation and initiate revisions when applicable.

  • Follow daily work activities schedule to meet maintenance objectives. Estimate materials and time needed to complete activities to ensure completion of tasks.

  • Install, maintain and repair secondary electrical systems, such as but not limited to, general wiring, lighting and communication systems.

  • Install, maintain and troubleshoot power equipment systems.

  • Install, maintain and troubleshoot rotating equipment, motor drives and associated control systems.

  • Install, maintain and troubleshoot stand-by power systems and associated equipment.

  • Maintain and operate test and measuring instruments and equipment to determine functional operation of electronic and electrical systems.

  • Maintain and troubleshoot industrial instrumentation devices and associated systems.

  • Perform preventive and predictive maintenance as established by maintenance program.

  • Maintain documentation to record performance problems, repairs, calibrations, and tests.

  • Communicate with other departments to identify and troubleshoot equipment problems.

  • Trains and provides subject matter expertise to Industrial Electricians.

  • Responsible for immediately reporting any safety, quality or plant security issues to management for appropriate action




ESSENTIAL SKILLS & ABILITY


  • Problem solving—identifies and resolves problems in a timely manner, gathers and analyzes information skillfully.




  • Planning/organizing—prioritizes and plans work and uses time efficiently. Attention to detail, organized, able to meet deadlines.




  • Quantity—meets productivity standards and completes work in a timely manner.




  • Adaptability—adapts to changes in the work environment, manages competing demands and is able to deal with frequent change, delays or unexpected events. Can function as a self-starter with the ability to work independently.




  • Dependability—consistently at work and on time, follows instructions and responds to management direction.

  • Safety and security—observes safety and security procedures and uses equipment and materials properly. Ability to read and interpret safety rules and instructions which are posted in English.

  • Communication - effectively and professionally conveys information internally and externally through verbal and written communication skills. Actively listens, communicates clearly, concisely and assures understanding.

  • Ability to calculate figures and amounts, add, subtract, multiply and divide numbers.

  • Function as a self-starter with the ability to work independently.

  • Detail-oriented and organized, able to work in a fast-pace environment and meet deadlines.

  • A demonstrated ability to prioritize, follow through, and manage multiple projects.

  • Ability to read and interpret safety rules and instructions which are posted in English
















ESSENTIAL QUALIFICATIONS, KNOWLEDGE & EXPERIENCE


  • High school diploma or GED

  • Associate's Degree (two year college or technical school) in Industrial Technology or similar field; or completion of recognized apprenticeship as maintenance; or equivalent work experience or vocational training is preferred.

  • 4 plus years of relevant maintenance experience.

  • Knowledge of basic instrumentation and calibration, preferred.

  • Experience in a manufacturing or industrial environment, preferred.

  • Basic proficiency in Microsoft Office

  • Knowledge of Programmable Logic Controllers

  • Knowledge of computerized maintenance management systems (CMMS), preferred.

  • Electrical Certification preferred.

  • Ability to work flexible days and hours to support business needs




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-14292
Job Location: Phoenix, AZ
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-04-08 00:00:00.0
Input Date: 04/08/2019
Last Updated: 05/07/2019
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing / Electrical Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Manufacturing / Electrical Engineer
(US Citizenship Required*)
State College, PA
2019-8483

Responsibilities:
• Provide manufacturing / electrical engineering support to new and existing product lines
• Assist in the design and refinement of new and existing products
• Assist in the setup of production assembly processes and flow
• Performs electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
• Participates in internal electrical reviews of electrical components, equipment and systems
• Supports the generation of technical documents for use on the manufacturing floor
• Participates in the selection of components and equipment based on analysis of requirements
• Lead and participate in continuous improvement projects
• Develop fixtures and tooling as needed

Qualifications:
• Clear understanding of electronics manufacturing processes
• Clear understanding of electrical engineering concepts, principles, and theories
• Ability to use engineering design software and CAD tools
• Clear understanding of Microsoft Office applications
• Clear written and verbal communications skills
• Ability to recognize and clearly report information relevant to sound engineering design
• Ability to work well in a team environment
• Ability to develop innovative methods and solutions
• Ability to be adaptable and flexible
• Some travel may be required
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in Electrical Engineering, a related specialized area or field, or equivalent experience is required

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8483
Job Location: State College, PA
Rate: Based on experience
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 2 (Electrical/ Electronics )

Description:
Manufacturing Engineer 2

Location: Heath, OH
Duration: 6 months

Job Description:
Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Primary responsibility will be to work with Operations and Engineering group to generate planning for repair and maintenance operations on electronic devices from Line Replaceable units down to circuit card levels. Will include all levels of planning to return units to operational configuration. Experience with I gold or Gold ESP is a plus but not required. Prefer experience creating detailed planning instructions from drawings and schematics.

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

Skills:
Category Name Required
Technical Skills Interpret schematics, assembly drawings, technical manuals No
Technical Skills Process Planning No

Skill Code: 66T-Electrical/Electronics
 
Job Location: Heath, OH
Per Diem: Split
Duration: 6
Start Date: ASAP
Input Date: 03/15/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Anusha Vuta
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
SOLUMINA_CATIA_SAP_MANUFACTURING_MECHANICAL_ELECTRICAL ENGINEERING.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10156
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner- Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 6+ Months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Position Comments:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Skill Code: 67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/24/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Minimum 5 years aircraft mass properties experience in product development environment.
- Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
- Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
- Experienced in database maintenance.
- Familiarity with Gulfstream products and design processes desired.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Description:
- Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
- Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
- Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
- Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
- Track and status structural or system weight versus target weights.
- Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
- Provide and report to management on Aircraft Weight and Balance status
- Coordinate activities to insure weight targets/goals are met

What you'll bring to the team:
- Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
- Apply people skills to provide optimum lightweight design concepts while working with design team.
- Experience with CATIA and SmarTeam is preferred.
 
Job Number: 10462
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Assembler

Description:

Description:  



Performs various production assembly operations on components and subassemblies.  Working under limited supervision uses visual aids, lists, and verbal and written instruction to assemble, modify, re-work or re-assemble units.  Assignments are complex.  Receives minimal instruction on routine work and general instructions on new assignments.  May guide work of Assembler I and II.  All work is performed in explosive handling areas or where explosive devices may be present.



  • Follow and meet manufacturing build schedules
  • Manufacture sub-assemblies
  • Knowledge of condition and countability of subassemblies
  • Set-up and operate electrical test equipment
  • Must know and be able to recognize proper tooling for a specific task
  • Must be able to perform mechanical assembly and solder connections
  • Must be able to work from assembly prints, drawings and work orders
  • Train less experienced assemblers as required
  • Other functions as assigned

Qualifications:

  • Three to five years minimum experience as a mechanical assembler
  • Applicants selected will be subject to a government investigation and must meet eligibility requirements for access to classified information.  Process to be initiated immediately after transfer
  • Cross-trained in multiple operations
  • Must be able to read and understand manufacturing procedures
  • Experienced in using a variety of hand tools, measuring devices, microscope
  • General knowledge of calibration systems
  • Must have basic soldering and welding skills
  • Strong interaction skills also required
  • Lift up to 25 lbs.




     
    Job Number: 1810088112
    Job Location: Hollister, CA
    Duration: 3 months
    Input Date: 07/25/2018
    Last Updated: 11/15/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Pam Zack
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mabNAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $55.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    - Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    - Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    - Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    - Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison with the shop on engineering issues.

    Design assignments include but are not limited to:
    - Item Installation Analysis
    - Similarity Analysis
    - Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10772
    Job Location: Savannah, GA
    Rate: $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 04/10/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Unique Skills:
    • Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues.
    • Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis.
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
     
    Job Number: 24-360
    Job Location: Savannah, GA
    Rate: $55/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 07/02/2019
    Last Updated: 07/22/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Independence, OH
    Rate: $48.25/HR
    Duration: 1 year contract
    Per Diem Split: No

    ****MUST be a U.S. Citizen or Permanent Resident****
    ****MUST have a Bachelor's Degree****

    Primary Responsibilities:
    - Report to a design lead
    - Create detailed part and assembly definition drawings and models FTA's using Catia V5
    - Create associated parts list supporting part definition
    - Must be fluent with SMARTEAM PDM.
    - Support drawing release schedule.
    - Revise/maintain layouts as required under the direction of a senior designer using Catia V5
    - Hydraulic actuators
    - Oleo-Pneumatic shock struts (single and dual stage)
    - Landing gear assemblies
    - System routings (electrical and hydraulic)
    - Revise detailed parts in support of customer change requests using Catia V5
    - Develop and implement changes that will improve installation of systems routings using Catia V5
    - Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
    - Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
    - Utilize analytical skills to support proposed design changes
    - Kinematics analysis using Catia V5
    - Preliminary structures evaluation
    - Understand impact on performance
    - Weight impact
    - Tolerance stack-up evaluation
    - Prepare material for and attend design reviews

    Education:
    - Bachelor's Degree is required.
    - 5+ years of experience.
     
    Job Number: 10665
    Job Location: Independence, OH
    Rate: $48.25/HR
    Per Diem: No
    Overtime: Possible
    Duration: 1 yr
    Input Date: 03/22/2019
    Last Updated: 04/19/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $58.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
    - Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    - Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    - Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    - Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison with the shop on engineering issues.
    - Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    - Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
    - Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10435
    Job Location: Savannah, GA
    Rate: $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/19/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $58.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
    - Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    - Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    - Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    - Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison with the shop on engineering issues.
    - Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    - Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
    - Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10603
    Job Location: Savannah, GA
    Rate: $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/12/2019
    Last Updated: 04/15/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer (Aerospace Interiors) for Savannah, GA

    Description:
    Contract - Mechanical Design Engineer - for 4 year CONTRACT in Savannah, GA

    Target Hourly Pay Rate: $55/hour

    Unique Skills:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
    Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

    -Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
    -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    -Design Engineer will be required to liaison with the shop on engineering issues.

    Design assignments include but are not limited to:
    -Item Installation Analysis
    -Similarity Analysis
    -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then call Peggy at 774-210-4108
    Referrals appreciated!!
     
    Job Number: PL-Interiors GA
    Job Location: Savannah, GA
    Rate: 55/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 4 years
    Start Date: 2 weeks
    Input Date: 07/10/2019
    Last Updated: 10/02/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer-Interiors

    Description:
    Mechanical Design Engineer-Interiors
    Savannah, GA
    Rate: $55

    4X10

    Unique Skills:

    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
     
    Job Number: 10763
    Job Location: Savannah, GA
    Rate: $55
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/09/2019
    Last Updated: 04/15/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer II – 2D/3D - CREO AutoCAD CO

    Description:
    163982 Mechanical Engineer II – 2D/3D - CREO AutoCAD

    Work Site Address: Aurora, CO 80011
    Job Number: 8915875
    Max Pay Rate: 60-65HR
    Start Date: ASAP
    End Date: 12 Months
    Position Type: Contract

    The candidate will join the Hardware and Infrastructure Engineering (HW&I) team. Responsibilities include developing detail design solutions utilizing Drawing Packages such as CREO and AutoCAD for the system infrastructure (network, storage, and computing) for new and revised systems. The position will require detail design artifacts to be generated which include drawings using computer assisted design (CAD) systems to prepare design layouts, detail and assembly drawings, and electrical schematics, wiring diagrams, parts list and other related documentation in conformance to appropriate program and/or military specifications. The candidate may have to prepare specifications, drawings, procedures and related engineering change orders.

    Roles and Responsibilities

    Qualifications and Education Requirements
    • Familiarity with CAD modeling tools, such as CREO (Pro/Engineer) and AutoCAD, and related drawing standards
    • Has strong hands-on familiarity with 2D and 3D drawing types
    • Strong technical background with high technical aptitude
    • Strong verbal and written communications and interpersonal skills when working with team members and customers
    • Self-starter, with the ability to work independently
    • Has performed Drawing Checker tasks for Design and documentation accuracy to drawing standards
    • Experience applying and interpreting Geometric Dimensioning and Tolerancing (ANSI Y14.5)
    • Experience performing tolerance analyses on individual parts and assemblies
    • Design experience with defense-related products, familiar with common industry and military standards

    Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 4+ years of related work experience or 12 years of related work experience in lieu of a degree Bachelor’s Degree in an Engineering Discipline.

    Preferred Skills
    • Basic engineering principles as they apply to hardware assemblies
    • Familiarity with Military and Commercial Drawing Standards, including ASME-Y14.100
    • Experience in developing Interface Control Drawings, Cable Assembly Drawings, Wiring Diagrams, Installation Drawings, and Rack Elevation Drawings
    • Knowledge of engineering process documentation (EPIC, ISO and/or CMMI)
    • Knowledge of configuration management process
     
    Job Number: MB-R8915875ATO
    Job Location: Aurora, CO
    Rate: 60-65/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 04/12/2019
    Last Updated: 04/16/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NX Designer ( Mesa , AZ ) 9052089

    Description:
    NX Designer ( Mesa , AZ ) 9052089
    9 Month Contract

    Pay Rate: $45-55/hr W2

    *Top 3 Skills: GD&T Background, Tolerance Stacking capabilities, proficiency with NX CAD software and TeamCenter.*// Looking for a self-motivated individual who will be ready to hit the ground running.//
    *
    Job Summary:
    The Senior Principal Designer will be assigned projects of varying complexity and scope involving gun systems and related components. The position involves the design and development of electrical and mechanical systems into a variety of vehicle applications. The position requires experience working with both engineering and program teams. In addition, this position requires a person that exhibits a high degree of teamwork, organization, technical skill and versatility.//
    *
    Job Responsibilities:
    Develops detailed design drawings and related specifications of mechanical equipment, according to engineering sketches and design proposal specifications: Analyzes engineering sketches, specifications, and related data and drawings to determine design factors, such as size, shape, and arrangement of parts. Sketches rough layout of part or machine and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages, and location of holes. Drafts detailed multi-view drawings of assemblies and subassemblies, including specifications for gear ratios, bearing loads, and direction of moving parts, using engineering data and standard references. Applicant must have extensive experience utilizing geometric dimensioning and tolerance of engineering products.//
     
    Job Number: 9052089
    Job Location: Mesa, AZ
    Rate: 50
    Per Diem: yes
    Overtime: yes
    Duration: 9 Months
    Start Date: ASAP
    Input Date: 04/29/2019
    Last Updated: 05/01/2019
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PCB Design Drafter

    Description:
    Electrical Designer/CAD Drafter with emphasis on aerospace electronics circuits. Activities will include conceptual layout, detailed design, and engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high power PCB layout designs. Will interface with other engineering groups to insure design requirements are fulfilled.

    The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

    The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

    Responsibilities may include:
    * Interprets electrical design requirements and creates original board layouts, detailed drawings, schematics, and illustrations
    * Provides for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
    * Performs specialized electrical design computations and analysis
    * Prepare diagrams and PCB design schedule estimations.
    * Coordinates electrical design work with Electrical Design Engineers
    * Collects background information and helps write specifications and electrical design practices
    * New product development from concept through production
    * Processing documents through document change system

    Additional Job Details:
    Qualifications Required
    * IPC Certified Interconnect Designer (CID), as a minimum.
    * Minimum 5 years experience with Cadence v16.6 - v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
    * Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
    * Thorough knowledge of Cadence Library manager.
    * Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
    * Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
    * Experienced in implementing manufacturers data as well as PCB and CCA suppliers DFM recommended suggestions.
    * Full understanding of PCB, FAB and CCA manufacturing processes.
    * Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail. * Must be a US person.
    Preferred:
    * IPC Advanced Certified Interconnect Designer (CID+).
    * Experience with Siemens Teamcenter PLM Software
    . * Knowledge of GD&T ASME Y14.5.
    * A background working on avionics design related experience a plus
    . * Knowledge of and the use of Hierarchal schematic blocks a plus.
    * Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow a plus.
    * Experience with Microsoft Visio a plus.
     
    Job Number: 48658
    Job Location: Phoenix, Az
    Duration: 6 months
    Start Date: ASAP
    Input Date: 04/11/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PWB (Printed Wiring Board) Design Engineer III

    Description:
    Location: Canoga Park, CA
    Rate: $40.00 - $50.00/HR
    Duration: 6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role **

    Duties:
    - The primary duty is to generate PWB on AR-provided Altium PWB Design and/or Mentor Graphic Board Station Tools for applications on the RS-25, Next Step, AEPS programs.
    - This assignment will require an experienced individual that can work closely with electrical/electronic circuit designers and electro-mechanical designers in a team environment.

    Skills:
    - Extensive (10+ years) experience in the design, development and generation of PWB drawings.
    - Experience in the use of S/W tools associated with PWB design is required and the ability to operate the Altium PWB is mandatory.
    - Experience in MENTOR Board Station Design tool is also desirable.

    Education:
    - BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.
     
    Job Number: 10281
    Job Location: Canoga Park, CA
    Rate: $40.00 - $50.00/HR
    Per Diem: Split Possible
    Duration: 6 mos
    Input Date: 03/19/2019
    Last Updated: 05/29/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Engineer Software 3 - Clearance / URGENT FL

    Description:
    Principal Engineer Software 3 (Job Number: 19007337)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: Jun 10, 2019

    Target End Date: Jun 5, 2020

    Requested Hourly Rate: 55.00

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year

    Candidates NEEDED ASAP

    The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

    The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

    • Full Lifecycle design, implementation, and unit testing of software
    • Work with various sub teams to integrate functionality with other IPTs
    • Actively participate in code reviews
    • Develop SW products from all phases of SW life cycle.


    Basic Qualifications:

    Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR


    Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience


    Experience developing software / writing code in C/C++ or Ada

    Experience with Linux



    Preferred Qualifications:

    Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering


    Strong Problem Solving Skills


    Experience in Software Test


    Familiarity with Atlassian tool suite and tools like git and Confluence


    Familiarity with Agile software development process


    DOORS


    Eclipse or other integrated development environment (IDE)


    Knowledge of Linux systems with basic commands


    Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)


    Experience with OpenGL
     
    Job Number: JK-1748S
    Job Location: Melbourne, FL
    Rate: 55/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 06/12/2019
    Last Updated: 06/12/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Software Engineer 3 - Clearance FL

    Description:
    1740 Principal Software Engineer 3 (Job Number: 19006470)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: May 6, 2019

    Target End Date: May 1, 2020
    Requested Hourly Rate: 50.00

    Pay Rate: $50/hr

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year


    The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

    The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

    • Full Lifecycle design, implementation, and unit testing of software

    • Work with various sub teams to integrate functionality with other IPTs

    • Actively participate in code reviews

    • Develop SW products from all phases of SW life cycle.

    Basic Qualifications:

    Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
    Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
    Experience developing software / writing code in C/C++ or Ada
    Experience with Linux

    Preferred Qualifications:

    Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
    Strong Problem Solving Skills
    Experience in Software Test
    Familiarity with Atlassian tool suite and tools like git and Confluence
    Familiarity with Agile software development process
    DOORS
    Eclipse or other integrated development environment (IDE)
    Knowledge of Linux systems with basic commands
    Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
    Experience with OpenGL
    Length of C/L = 12 months
     
    Job Number: MB-1740S
    Job Location: Melbourne, FL
    Rate: 50/hr
    Per Diem: no
    Duration: 12 months
    Input Date: 05/16/2019
    Last Updated: 05/24/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Software Engineer 3 FL

    Description:
    Principal Software Engineer 3 (Job Number: 18026677, 18026687, 18026691, 18026697)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: Mar 25, 2019

    Target End Date: Mar 20, 2020

    Pay Rate: $50/hr

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year


    The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

    The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
    • Full Lifecycle design, implementation, and unit testing of software
    • Work with various sub teams to integrate functionality with other IPTs
    • Actively participate in code reviews
    • Develop SW products from all phases of SW life cycle.


    Basic Qualifications:

    Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
    Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
    Experience developing software / writing code in C/C++ or Ada
    Experience with Linux




    Preferred Qualifications:

    Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
    Strong Problem Solving Skills
    Experience in Software Test
    Familiarity with Atlassian tool suite and tools like git and Confluence
    Familiarity with Agile software development process


    DOORS
    Eclipse or other integrated development environment (IDE)
    Knowledge of Linux systems with basic commands
    Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
    Experience with OpenGL
     
    Job Number: MB-1725S
    Job Location: Melbourne, FL
    Rate: 48-50/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 01/31/2019
    Last Updated: 04/29/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Pro/E Creo Designers

    Description:
    Mechanical or electrical design experience

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 06/12/2018
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Engineer

    Description:
    Product Engineer

    Location: Fargo, ND
    Duration: 1 year

    Description:
    Plans, coordinates, performs product design, testing and/or analysis work for a complete project of moderate scope or for a significant portion or a sub-system of a major and diverse project. Operates in a team environment, providing input to design solutions and participating in design reviews. May assign, coordinate and review portions of the work to support personnel. Decisions are made within established guidelines and may be reviewed by supervisors.

    Duties:
    Executes high level applications to more complex problems. Analyzes assignments and determines engineering specifications which must be fulfilled for complex problems or projects of moderate scope. Produces and/or evaluates possible design solutions to improve cost, quality and performance based on specialized knowledge of engineering applications. This may include possible involvement of other functional engineers, supply management and/or supplier personnel. Compiles and furnishes necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers, supply management and/or supplier personnel. Provides technical support to marketing, manufacturing, quality and supply management organizations. Develops and/or executes test or analysis plan for product verification and validation. Applies knowledge of company products, policies and practices to provide economies through standardization of parts and products.

    Specific Position Requirements:
    Daily duties may include analyzing warranty and field returns/escalations. Main focus would be to determine product error after initial triage. Summarizing findings and proposed solutions to group of design engineers. Team communication and collaboration is essential.

    Electronic Design Engineer:
    - Minimum B.S. degree in Electrical Engineering equivalent work experience.
    - 1-3 years’ experience in electronic circuit/hardware design
    - Must be able to understand embedded firmware hardware (electronic module) troubleshooting and design
    - Must have experience reading schematics and using schematic capture tools (Mentor Graphics or others)
    - Previous experience in an Agricultural or Automotive background is a plus
    - Experience with GPS systems are a plus
     
    Job Number: 18-19631
    Job Location: Fargo, ND
    Per Diem: Possible
    Overtime: possible
    Duration: 12 Mos
    Start Date: ASAP
    Input Date: 11/27/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Arun Rana
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Review Engineer 2

    Description:
    Product Review Engineer 2

    Location: Heath, OH
    Duration: 6 months

    Description:
    Applies basic knowledge of client design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer. Analyzes, conducts failure analysis, root cause analysis and troubleshoots to understand root cause. Primary responsibility will be reviewing requirement, evaluating test capability, Preparing Engineering Basis of estimates for proposal work.

    Skills:
    Category Name Required
    Areas of Expertise Electrical Troubleshooting No
    Soft Skills Writing proposals and reports No
    Technical Skills Interpret schematics, assembly drawings, technical manuals No

    Education / Experience:
    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a master’s degree with experience in an engineering classification.
    Required: Bachelor or master’s degree from an accredited course of study, in engineering, com

    Skill Code:
    62E-Liaison Engineering.

    Please share updated resume at ravi@iconma.com if interested.
     
    Job Number: 19-03537
    Job Location: Heath,, OH
    Per Diem: Available
    Input Date: 03/28/2019
    Last Updated: 04/09/2019
    Firm Name: ICONMA LLC
    Attention: Ravi Kumar
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/234-6123
    800 Phone: 866/914-9724
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer / IPD Team Lead

    Description:
    Project Engineer / IPD Team Lead

    Location: Windsor Locks, CT
    Pay Rate: $48.25/hr
    Duration: 1 year contract
    Shift: First
    **MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
    **NO RELOCATION COMPENSATION**

    Description:
    Project Engineering Integrated Product Development (IPD) Team Lead will provide continuous support of environmental controls for the US Navy. The environmental controls include oxygen generation and CO2 removal for VIRGINIA, OHIO and COLUMBIA classes of submarines. The successful candidate will be working on the support of the qualification and production builds of our many different products. Additionally, the candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to drive delivery of these products within the approved budget and schedule. Familiarity with SAP, and company Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and will play a critical role in driving project execution while meeting both internal and external customer expectations. This position requires creation and delivery of technical presentations to management and customers.

    Additional:
    • BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
    • 5+ years leading teams and managing projects Prior experience working with or managing multi-disciplinary teams in a fast paced environment
    • Excellent verbal, written and interpersonal communication skills
    • Experience and familiarity with product qualification, and production build and test (specifically with respect to low volume Navy hardware)
    • Natural presence/comfortable presenting to internal and external customers
    • Demonstrated command of RRCA methodology and tools
    • Experience troubleshooting (specifically with respect to MRB disposition) in troubleshooting problems on the production floor and coming up with creative solutions that maintain product quality while minimizing cost/schedule impact
    • Ability to bring team members together and work problems to resolution
    • Ability to work independently and as part of a team
    • Proven planning, adaptability, organizational and negotiation skills for effective team management
    • Ability to anticipate project risks and build contingency plans
    • Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
    • Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
    • Participate in regular reviews with the customer to communicate status of contracts and schedule.
    • Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
    • Develop and manage program schedules to drive on-time contract deliveries.
    • Participate in contract proposals, including BOE and BOM estimates.
    • Utilize Earned Value methodology to forecast program demands and track project completion.
    • Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
    • Project Management Professional (PMP) certification is a plus.
    • US Citizen
     
    Job Number: 9992
    Job Location: Windsor Locks, CT
    Rate: 48.25
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 03/06/2019
    Last Updated: 04/15/2019
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Lead - Repair Engineering

    Description:
    Project Lead - Repair Engineering
    Contract-to-hire
    Location: Kansas City, MO
    Summary:
    We are looking for a candidate to lead the engineering team in the accomplishment of repairs for in service aircraft and aircraft in heavy maintenance.
    Duties will include providing guidance and helping develop less experienced engineering staff, provide technical coordination/expertise between the engineering team and the customer, and interacting with vendors and internal organizations. Applicant should have relevant airline, MRO, or OEM in-service support experience with proven leadership.
    The individual will lead activities of engineering staff at the discretion of Engineering Management to complete tasks accurately while maintaining responsiveness in order to maintain aircraft, component, and engineering program schedules. Other duties will include development of proposals, assisting with planning and hiring, and other Engineering Management tasks.
    ESSENTIAL DUTIES AND RESPONSIBILITIES:
    • Leads activities of direct Engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of repairs and modifications during maintenance and component overhaul visits.
    • Plans, reviews, organizes, and prioritizes engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules.
    • Primary point of contact between customer representatives and/or internal customers to ensure consistent action in accordance with customer requirements.
    • Mentor and train Repair Engineers from all levels of experience; identify and grow the expertise and experience of the team.
    • Recognize and fully understand the proper use of all applicable customer, OEM, regulatory, and maintenance requirements, and ensure that these are met.
    • Identify performance related issues and provides feedback to management.
    • Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency.
    • Analyze and substantiate complex repair and modification designs using standard accepted industry practices. Produce technical analysis of repair standards and history for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, operations, and maintenance requirements.
    • Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed.
    • Provide written technical accomplishment instructions for aircraft repairs or modifications to maintenance, customer, and regulatory authorities as necessary.
    • Communicate technical details of repair or modification designs through technical writing and computer drafting functions.
    • Independently evaluate, select, and adapt situations, and modify techniques, procedures and criteria to solve problems encountered.
    • Approve engineering documents within authorized signatory level.
    • Assist in interviewing and making hiring recommendations for new Engineering personnel.
    • Participate in the development of work statements and hour estimates in support of proposals.
    AUTHORITY:
    The individual in this position may initiate technical instructions that are substantiated by data acceptable to or approved by the FAA and EASA or equivalent. For technical instruction pertaining to work accomplished on aircraft or components operated under CFR Part 91, 121, and 145, authority is as specified by the air carrier's procedures and/or Repair Station Manual.
    SKILLS AND KNOWLEDGE:
    • Experienced with OEM airframe, system, and interior design practices.
    • Strong working knowledge of MyBoeingFleet and AirbusWorld for OEM datasets.
    • Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
    • Strong PC skills will include 3D Computer Aided Design proficiency (SOLIDWORKS or AutoCAD preferred), MS Office products (Word, Excel, PowerPoint, Visio and Project), and basic computer drafting skills.
    • Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
    • Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs.
    • Ability to understand and apply the policies / procedures of all customer(s).
    • Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials.
    • Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
    • Excellent interpersonal and communication (written and verbal) skills with other groups (avionics, certification, Program Management and Maintenance Leads, MRO Facilities and customers) experience strongly preferred.
    • Self-motivated and multi-tasker; able to level load own workload.
    • Strong time-management, and problem-solving skills.
    EDUCATION AND/OR EXPERIENCE:
    Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of ten (10) years relevant aerospace experience or 15 years of equivalent aircraft design experience required.







    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 55916
    Job Location: St. Louis, MO
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/29/2019
    Last Updated: 04/24/2019
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Mission Assurance Analyst 4 LA

    Description:
    164335
    1743 Quality Mission Assurance Analyst 4 (Job Number: 19006863)

    Number of Openings: 1

    Location(s): United States-Louisiana-Lake Charles


    Shift: 1st Shift

    Target Start Date: Mar 25, 2019

    Target End Date: Mar 27, 2020

    Work Week: 4/10

    Location: Lake Charles, LA

    Duration: 1 Year (and potential to extend)


    Hourly Rate: $52.50

    Develop and implement program quality plans, programs, and procedures using statistical quality control statistics, lean manufacturing concepts, and six-sigma tools and analyses. Ensures that performance and quality products conform to established company and regulatory standards. Reviews, analyzes and reports on quality discrepancies related to assembly, process, mechanical, electrical and electro-mechanical systems. Investigates problems and develops disposition and corrective actions for recurring discrepancies. Interfaces with manufacturing, engineering, customer, vendor and subcontractor representatives to ensure requirements are met. Recommends corrective actions, dispositions and modifications.

    Basic Qualifications:

    6 Years with Bachelors; 4 Years with Masters


    Preferred Qualifications:

    Extensive knowledge in production quality assurance is preferred.

    Working knowledge and understanding of MES

    Aircraft and structures experience is a plus
     
    Job Number: MB-1743ATO
    Job Location: Lake Charles, LA
    Rate: 52.50/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 04/29/2019
    Last Updated: 05/15/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Regional Sales Engineer

    Description:
    Our client is a leading manufacturer of high reliability power electronic component solutions for the Defense, Aerospace, Space, Medical and other high reliability markets. Our client provides its customers with rugged, light-weight, and cost effective solutions for switching power supplies, AC-DC rectification, primary & secondary power distribution, motion control, transient voltage spike protection, and custom applications. From engineering design to finished product, our client can deliver innovative products to meet your power system requirements.

    We are currently searching for the right talent to fill this opportunity:

    Regional Sales Engineer
    (U.S. Citizenship Required*)
    Hauppauge, NY
    2019-8542

    Join our team as a highly motivated Sales Engineer with proven experience in selling power electronic products to development engineers. You’ll manage territory booking goals, sales representative management, distribution engagement, and providing overall customer satisfaction.

    Using your technical knowledge and sales skills, you’ll advise & support our customers on a range of products. You’ll engage existing and prospective customer engineers with design-ins and bids for existing and new products. You’ll stay engaged at all technical levels, electrical /mechanical design, components, engineering management, and program management, to obtain new opportunity design-ins on production platforms.

    Responsibilities:
    • Responsible for sales volume, forecasting and sales growth, by maintaining existing customer base and increasing new customer base within designated sales territory.
    • Identify new program opportunities that will generate a minimum of $100k per year in orders for each design-in opportunity.
    • Call on current and potential customers such as engineers, designers, or other professional and technical personnel in the Defense, Aerospace and Space market segments and convince prospective clients of desirability and practicability of products offered.
    • Support distributions sales growth via trainings, support, joint calls, joint marketing and goal setting.
    • Manage and follow up on leads in local territory.
    • Review customer drawings, plans, and other customer documents to develop and prepare cost estimates and properly engineered products.
    • Provide technical support to clients relating to operation of motors, drives and related products.
    • Prepare and present customer quotations, trainings, seminars, call reports, and special reports as directed.
    • Work with Accounts Receivables to collect delinquent payments.
    • Prepare and submit sales reports.
    • Share market information working with other departments throughout the organization.
    • Participate in the Sales Engineer Certification Program as related to the Technical Knowledge of products.
    • Use CRM as necessary to record customer information.
    • Identify current and future customer program opportunities and engages with customer and supplier engineering to present and close new product designs.
    • Establish new accounts and services accounts by identifying potential customers; planning and organizing sales call schedule.
    • Determine improvements by analyzing cost-benefit ratios of equipment, supplies, or service applications in customer environment; engineering or proposing changes in equipment, processes, or use of materials or services.
    • Gain customer acceptance by explaining or demonstrating products.
    • Submit orders by conferring with technical support staff; costing engineering changes.
    • Develop customer's staff by providing technical information and training.
    • Prepare sales engineering reports by collecting, analyzing, and summarizing sales information and engineering and application trends.
    • Maintain professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
    • Contribute to sales engineering effectiveness by identifying short-term and long-range issues that must be addressed; providing information and commentary pertinent to deliberations; recommending options and courses of action; implementing directives.
    • Contribute to team effort by accomplishing related results as needed.

    Qualification:
    • Problem Solving, Product Knowledge, Selling to Customer Needs, Software Requirements, Product Development, Presentation Skills, General Programming Skills, Technical Understanding, Verbal Communication, Requirements Analysis, Innovation.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor’s degree and 5 years of sales experience in the aerospace & defense industry

    Moseley Technical Services, Inc. and our client are AA/EEO/Veterans/Disabled Employers.
     
    Job Number: 2019-8542
    Job Location: Hauppauge, NY
    Rate: Based on experience
    Input Date: 04/11/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: jobs@moseleytechnical.com
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com