Job Search Results

657 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 07:01PM Pacific Time by ContractJobHunter. )

Listings 1 - 657

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Requirements:

Looking for someone with at least 2 years of primary composite Stress Analysis experience.
Extensive experience developing and running finite element internal loads models.
Extensive experience calculating strength and updating Global FEM properties
Experience with full scale static testing is a plus.
Must have experience with FEA/FEM tools like Nastran, Patran, or FEMAP.
Writing certification reports is a plus
Experience with light aircraft a plus. Experience with larger aircraft is ok as long as the experience was with composite structure.
Experience and a high level of comfort working in undefined environment and ability to work without direction.


Job description:

This is a Senior-Level stress analyst position in the Aerostructures Engineering Organization. General responsibilities include leading and coordinating the stress activities within an assigned project, establishing and communicating clear task expectations, defining engineering criteria and analysis methods to ensure consistency, and reviewing analysis and reports for accuracy and conformance with program requirements.


The ideal candidate for the Senior Airframe Stress Analyst will possess the following skills and experience:
Act as the first level of authority within the team for technical approval and exercise latitude in determining technical objectives of programs.
Must have a thorough working knowledge of the design of flight vehicles or vehicle systems to a set of requirements or standards such as 14 CFR Part 23 and Part 25, MIL-HDBK-516C, or NASA Procedural Requirements as they relate to certification of airframe structures.
Leveraging diversified knowledge and engineering experience, provide directions and coordinate work within the assigned analysts and actively participate in daily operations as required to meet schedules and resolve issues.
Work with inter-disciplinary teams such as Design, Loads, Materials & Processes and Manufacturing groups to provide solutions to mitigate form, fit, function, producibility, and maintainability aspects of airframe structural designs.
Excellent verbal and written communication skills, including strong interpersonal and communication skills in dealing with program management and customers.
Demonstrate proficiency in FEA tools.


Responsibilities:
Create appropriate engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
Select appropriate material systems for structures applications and identify all material testing requirements.
Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.
Mentor, coach and motivate the stress team members in every way possible.


Minimum Requirements (education and experience):
4 year engineering degree from an accredited university (BS in Mechanical Engineering, Aerospace Engineering or similar)
8+ years of applicable experience with a Master degree or 10+ years of applicable experience with a Bachelor degree
Demonstrated ability to use Microsoft Excel, Word and Powerpoint


The Structures Company is an AA/EOE.
 
Job Number: 243
Job Location: VA
Rate: $80-$85/HR. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2531 - CABIN SYSTEMS ENGINEER - cv, word only

Description:
Act as an engineering integrator for the definition, specification and interfaces, design, analysis, interface with suppliers, development, test and certification for Client Inflight Entertainment, Connectivity and In Seat Power Supply System.

Review, assess and approve engineering documentation and drawings.

Interface with other specialist work packages, such as installations, stress, EMI, e.t.c to ensure your assigned systems optimization on Aircraft.

Bachelor degree or equivalent in mechanical or electrical engineering and a minimum of 10 years of engineering experience dealing with Aircraft systems, preference will be for previous experience with above mentioned prime responsibility systems.

Working experience with MS Office; CATIA and Enovia skills will be a definite asset.

Familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment. (knowledge on DO-160 regulation will be an asset)

Have good oral and written skills in English; French will be a definite asset.

Ability to work with minimum supervision and you are a team player

Have initiative, a strong sense of responsibilities and good technical judgment.

Strong leadership to conduct a team in successful achievement of milestone in multidisciplinary technical team.

Strong knowledge of Commercial Aircraft interior cabin systems including in-flight entertainment system and connectivity network.
 
Job Number: 2531
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Fuel Systems

Description:
Sr. Mechanical Systems Engineer:

Must also have experience with the following:

• Must have clean sheet design experience
• Must have a fuel systems background.
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus



The Structures Company is an AA/EOE.
 
Job Number: 252
Job Location: Manassas, VA
Rate: $80/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ASIR Test Engineer

Description:
We are seeking a Test Conductor/Test Engineer for our Avionics System Integration Rig (ASIR). This position is located in Seattle, WA and you will be working with a new exciting aviation project. The test rig is a static test bench for all of the Avionics Systems on a new regional jet aircraft with a simulation host computer to stimulate the systems. This position requires the development and test of Engineering Test Procedures (Test Cards) based on the Engineering Test Spec requirements from the Avionics Design group, and the creation of Test Reports following the tests to document the results.


Responsibilities:
•Development and test of Engineering Test Procedures (Test Cards) using in house tools.

•Creation of Test Reports following the tests to document the results.

•Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.

•Support the Configuration Management of the Test Rig.

•Facilities planning.

•Creation and carrying out of Rig Maintenance Procedures,

•Test Video Recording & Equipment management.

•Software Loading following provided instructions.



Requirements
•Candidates should have experience conducting systems testing on a test bench or static simulator.

•Engineering degree of relevant experience.

•Avionics experience.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer

Description:
STS Technical Services now offers Aerospace Engineering jobs in Minneapolis, Minnesota.

Summary:

Perform a variety of engineering work, primarily developing the design/repair of aircraft composite and/or sheet-metal components used on a fleet of aircraft made up of multiple aircraft manufacturers. Supports other various shops including the oxygen bottle shop. The successful candidate serves as an engineer driving commercial aircraft component repair compliance projects. This position works very closely with component engineering, fleet engineering, internal shops, external vendors and customers.

Essential Functions:

Repair design and substantiation. Reviewing data and recommending/implementing changes, as required, to improve aircraft reliability
Reviewing, recommending, and implementing manufacturers’ service bulletins and other correspondence to affected fleets
Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Company’s Technical Operations Policy and Procedures (TOPP) and all other engineering processes
Providing status for projects/issues through various briefings and documentation (i.e. Fleet Briefs, Quarterly Business Review, and applicable monthly reports)
Revising/developing numerous FAA approved Manuals and Engineering Reports
Collaboration and communication with Manufacturers and the FAA ACO and FSDO/CMO may be required
Irregular shift hours may be required, on rare occasion, due to critical requirements. This may include weekend work depending on criticality of the issue
Minimal travel is required to support the programs (less than 10%)
This position will focus on composite & sheet-metal component structures of an aircraft and other general shop support. Areas of knowledge will include composites, sheet metal, and oxygen bottles
This position reports to a lead engineer and the Manager of Component Engineering

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45144
Job Location: Minneapolis, MN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

•​Review and support Avionics Certification Activities.

•Create and review Certification Plans.

•Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.

•Review qualification by similarity and/or analysis reports.

•Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).

•Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.

•Perform Component Drawing Reviews.

•Complete aircraft assembly and installation drawing reviews.

•Participate in System Design Reviews.

•Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.

•Coordinate with certification authorities to seek clarification on requirements.

•Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.

•Create, review and approve interface control documents and any sub level writing interface documents.

•Support Avionics Flight Testing Activities, including but not limited to:

•Discuss, write and review test plans and preparation activities with flight test team.

•Help prepare and review pre and post flight briefing.

•Monitor live flight data, typically via telemetry, during flight test on aircraft.

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety pf flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate limitations documentation.

•Complete special projects and tasks assigned by Group Lead.






Requirements

Knowledge/Skills/Abilities

•Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).

•Good leadership presence as well as people management skills:

•Future-oriented in thinking and operation.

•Able to lead by example and live/work by company values.

•Ability to successfully contribute to a positive and productive work environment.

•Able to in still a sense of urgency in team members.

•Able to be patient and objective in difficult situations with different types of people.

•Strong customer service tool box:

•Professional mannerisms, appearance and actions (self-confident and committed to high ethics).

•Strong follow-through, quick thinking and resourceful.

•Ability to remain calm, cool and collected in stressful situations.

•Strong sense of urgency to resolve customer needs.

•Strong organizational, time management and prioritization skills:

•Able to multi-task, maintain focus on several different projects at one time and hit deadlines.

•Able to be flexible with attention and priority.

•Ability to work in a progressive, fast-paced environment (work well under pressure).

•Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.

•Strong communication skills (oral, written, presentation) with both external and internal customers.

•Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

•Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.

•Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.

•Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.

•Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.

•Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.

•Proven track record of improving the efficiency of assigned processes or procedures.


Education

•Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).

•Other Engineering fields may be considered.


Experience

•Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Engineer

Description:
STS Technical Services is currently hiring an Aircraft Interiors Engineer in Denver, Colorado.

Job Summary:

Work with OEM or company Designated Engineering Representative (DER) for approval of major repairs and modifications and for conformity and compliance with applicable FARs.

Job Duties:

Review Airworthiness Directives and Service Bulletins for applicability to our client’s fleet
Develop Engineering Orders to accomplish modifications in response to ADs, Service Bulletins, SILs, etc
Provide engineering support for Line and Heavy Maintenance to include minor repair authorizations, parts and materials substitutions, repairs, and reports
Evaluate and determine disposition of BER parts
Conduct research and data collection to aid for development of Fleet Campaign Directives, Engineering Authorizations, Engineering Orders, Engineering specifications and other engineering documents
Review and revise past maintenance support and engineering specifications to ensure airline remains current and within regulations
Respond to requests for engineering assistance to obtain or develop approved engineering data when that data is not in the AMM, SRM, or other FAA approved documents
Interact with applicable departments to define, maintain, and optimize the CAMP
Analyze and determine disposition of all reliability issues and improvements
Maintain familiarization with the training requirements necessary as defined in the GMM and ensure training is current prior to performing the functions and tasks of the position
Minimize costs and aircraft out-of-service time relative to area of responsibility
Ensure that specifications exist for configuration control to include engineering documents for new aircraft delivery configuration and standardization. Review and research aircraft configurations and modifications for induction and lease return EOs

Qualifications:

Engineering degree preferred; will consider FAA Mechanic certificate with both Airframe and Power plant ratings in lieu of degree
Minimum of 1 year experience in a 121 airline environment Technical Services / Engineering department or comparable maintenance experience
Must be familiar with and have general understanding of Time Controlled Parts, Reliability Programs, FARs, Manufacturers Documentation to include but not limited to Maintenance Manuals, IPC’s, Troubleshooting Manuals, Wiring Diagrams, Aircraft Drawings and CMM’s, SB’s, STC’s, AD’s and PMA parts
Must have excellent communication skills, and at least moderate computer and technical writing skills. Ability to work extended hours and weekends on occasion as required by management or for project completion

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45218
Job Location: Denver, CO
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Coordinator 3 MS

Description:
Aircraft Records Coordinator 3 (Job Number: 18022546)

Number of Openings: 1

Location(s): United States-Mississippi-Moss Point


Shift: 1st Shift

Target Start Date: Nov 26, 2018

Target End Date: Nov 22, 2019

Pay Rate: $23/hr

Work Schedule: 4/10

Duration of Assignment: Up to 1 year

Aircraft Records Coordinator 3

The duties of this position will include, but are not limited to: constructing, updating, and maintaining aircraft and engine logbooks and records, aircraft inventory records (AIR), and weight & balance reports, while ensuring compliance with CNAFINST 4790.2 series and contractual requirements.

Knowledge:

•Thorough knowledge of aircraft logbooks, maintenance records, technical publications and CNAFINST 4790.2 series.
•Knowledge and proficiency in maintenance and material control procedures, aircraft logbooks, Aeronautical Equipment Service Records, Aircraft Inventory Records, Weight and Balance data, and Technical Directive reporting.
•Must be proficient in Microsoft products with a high degree of computer operation/keypunch knowledge.
•Must be able to analyze maintenance and material data and provide statistical reports.

Must be organized and driven to meet all deadlines.


Basic Qualifications:

The chosen applicant will be required to meticulously coordinate the construction of all aircraft and engine logbook forms for delivery to the Navy customer and will have the following qualifications:

•US Navy / US Marine Corps maintenance administration course graduate – (required).
•US Navy / US Marine Corps O-Level CNAFINST 4790.2 series experience: 4 years (required)
•Experience as a US Navy / US Marine Corps Logs and Records Administrator or Supervisor: 4 years (required)

Preferred Qualifications:

•Completion of US Navy Logs and Records course completion (preferred)
•Aircraft Weight and Balance course completion (preferred)
•Familiarity with aircraft DD250 process (preferred)
•Aircraft logbook experience with military rotary aircraft (preferred)
 
Job Number: MB-1691
Job Location: Moss Point, MS
Rate: 23/hr max
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Engineer - CATIA V5 - Los Angeles

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.

Our client in the Los Angeles area is looking for a CATIA V5 structural design engineer to work on a freighter conversion. Airbus experience and modifications to aircraft structure relative to cargo doors area and cargo handling systems is also desired.

Please describe your experience in detal with CATIA v5, emphasizing when it was last used for design, modeling, and drawing, and how it applies to Primary Structures.
 
Job Number: Keltia111417
Job Location: Los Angeles, CA
Rate: 50-55/hr
Per Diem: possible
Overtime: No
Duration: 6mo +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
STS Technical Services is currently hiring Aircraft Systems Engineers in Denver, Colorado.

Job Summary:

Provide engineering support for line and heavy maintenance for assigned area of responsibility. Work with OEM or company Designated Engineering Representative (DER) for approval of major repairs and modifications and for conformity and compliance with applicable FARs.

Job Duties:

Review Airworthiness Directives and Service Bulletins for applicability to out client’s fleet
Develop Engineering Orders to accomplish modifications in response to ADs, Service Bulletins, SILs, etc.
Provide engineering support for Line and Heavy Maintenance to include minor repair authorizations, parts and materials substitutions, repairs, and reports
Evaluate and determine disposition of BER parts
Conduct research and data collection to aid for development of Fleet Campaign Directives, Engineering Authorizations, Engineering Orders, Engineering specifications and other engineering documents
Review and revise past maintenance support and engineering specifications to ensure airline remains current and within regulations
Respond to requests for engineering assistance to obtain or develop approved engineering data when that data is not in the AMM, SRM, or other FAA approved documents
Interact with applicable departments to define, maintain, and optimize the CAMP
Analyze and determine disposition of all reliability issues and improvements
Maintain familiarization with the training requirements necessary as defined in the GMM and ensure training is current prior to performing the functions and tasks of the position
Minimize costs and aircraft out-of-service time relative to area of responsibility
Ensure that specifications exist for configuration control to include engineering documents for new aircraft delivery configuration and standardization
Review and research aircraft configurations and modifications for induction and lease return EOs.

Qualifications:

Engineering degree preferred; will consider FAA Mechanic certificate with both Airframe and Power plant ratings in lieu of degree
Minimum of 1 year experience in a 121 airline environment Technical Services / Engineering department or comparable maintenance experience
Must be familiar with and have general understanding of Time Controlled Parts, Reliability Programs, FARs, Manufacturers Documentation to include but not limited to Maintenance Manuals, IPC’s, Troubleshooting Manuals, Wiring Diagrams, Aircraft Drawings and CMM’s, SB’s, STC’s, AD’s and PMA parts

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45216
Job Location: Denver, CO
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Tech Support Engineers

Description:
STS Technical Services is currently hiring Aircraft Tech Support Engineers in Denver, Colorado.

Job Summary:

When not providing AOG support, the position is researching and drafting long term projects such as Aging Aircraft ADs. The Technical Support Engineer is the primary Engineering department contact for afterhours Engineering support, such as for AOG related issues, repair requests and support drawings.

Job Duties:
Primary Engineering contact for the Maintenance organization outside of normal business hours
Quickly and effectively provide information and instructions to resolve Maintenance issues within a high-pressure environment
Troubleshoot and develop Engineering Authorizations for deferred or chronic issues, as well as for repairs to AOG or AOG imminent aircraft. Interpret drawings, technical data, and Title 14 CFRs as applicable for repairs and modifications
Respond to requests for technical information and engineering data from the maintenance organization
Coordinate and liaise with aircraft and component manufacturers to obtain technical data and required approvals for engineering assignments
Prepare technical data, procedures, reports, drawings, manuals, and other required publications
Review Engineering Assistance Requests (EAR), Service Bulletins, Airworthiness Directives, Service Letters and create engineering projects as required by those documents
Ensure Service Bulletins are entered into the Company FMIS (TRAX) and kept up to date
Remain cognizant of Title 14 CFR changes, modifications, configuration changes, and maintenance program requirements
Suggest improvements to aircraft systems, methods and procedures, and participate in reliability improvement and cost reduction programs
Gather data for technical manuals, drawings, inspect aircraft, pursuant to obtaining FAA approval for aircraft modification and repair as directed
Remain familiar with the GMM and other company manuals

Qualifications:

Bachelor’s degree preferred; minimum Associate’s degree in Aerospace Engineering, Aviation Technology or a related field required; combination of relevant education and experience considered in lieu of degree
Valid FAA Mechanic Certificate with Airframe and Powerplant (A&P) rating may be accepted in lieu of degree, with equivalent experience Minimum 1 year of experience in a 121 airline department or comparable maintenance experience
Strong analytical skills Ability to make sound decisions quickly Knowledge of Title 14 of the Code of Federal Regulations General understanding of time controlled parts, reliability programs, FARs, manufacturers’ documentation to include but not limited to: maintenance manuals, IPCs, troubleshooting manuals, wiring diagrams, aircraft drawings and CMMs, SBs, STCs, Ads and PMA parts Excellent communication skills Moderate level of computer and technical writing skills

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45220
Job Location: Denver, CO
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Design Engineer

Description:
This position is responsible for Design, modification and integration of custom avionics and electrical packages for new rotorcraft aircraft. We are seeking a minimum of 6 years of previous experience in an Engineering role in Aviation or Aerospace manufacturing environment. Must be proficient in MS Office and AutoCAD.
Education: Required: Bachelor's degree in Electrical/Aeronautical from an accredited college/university
Preferred: Master's Degree from an accredited college/university in engineering
This position requires a US Person as defined by ITAR regulations.
 
Job Number: 943114
Job Location: Grand Prairie, TX
Rate: $ 65.-75./ hrly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Design Engineer

Description:
This position is responsible for Design, modification and integration of custom avionics and electrical packages for new rotary aircraft. We are seeking a minimum of 6 years of previous experience in an Engineering role in Aviation or Aerospace manufacturing environment. Must be proficient in MS Office and AutoCAD.
Education: Required: Bachelor's degree in Electrical/Aeronautical from an accredited college/university
Preferred: Master's Degree from an accredited college/university in engineering.
This position requires a US Person as defined by ITAR regulations.
 
Job Number: 943127
Job Location: Columbus, MS
Rate: $ 65.-75./ hrly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Avionics Engineer
Avionics Interpret electrical and avionics requirements and generate detailed task descriptions for the team
Significant leadership and equipment qualification experience
Experience with equipment design, integration, relevant testing both on and off aircraft
Excellent organizational and prioritization skills
14 CFR Part 27 and 29 certification experience (ELAs, developing test plans and reports, system safety analysis, lead testing activities)
Leadership and mentoring skills – develop engineering staff in house
Design and integrate the following systems: communication Systems (like Becker, Eagle, etc), navigation systems (transponders, TCAS, mapping systems), TDFMs, 12 v and 110 electrical systems into an aircraft
Take designs and create Wiring Diagrams and Harness drawings
Have experience with 14 CFR Part 27 and 29
Have experience with writing test plans and performing tests(EMI/EMC, Flight testing, etc)
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic System Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.

Duties and Responsibilities:
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• DO-160F/G, DO-178B and DO-254 experience required.
• Define, plan, and develop complex systems level requirements to support the avionic systems for the aircraft
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 10 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in requirements management tools such as DOORS
• Experience with PLM Tools such as TeamCenter and SAP

The Structures Company is an AA/EOE.
 
Job Number: 253
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Design Engineer - Bleed Air

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Must have experience with system layout/conceptual design of aircraft bleed air systems during conceptual/preliminary design phase Aircraft experience
• Prepare 3D installation and detail models of the BAS and VCS.
• Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science - Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.


The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer (Aerostructures)

Description:
Our client is looking for a CAD Designer to work in San Antonio, Texas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Create 3D CAD model of all parts and assemblies, checking dimension of parts, materials to be used, relation of one part to another, and relation of various parts to whole structure or project.
* Work from actual aircraft dimensions, existing 2D drawings, sketches, scanned images, customer drawings, or specifications, to create 3D CAD models and drawings
* Create and revise production drawings (detail, assembly, and installation drawings).
* Utilize knowledge of standard engineering practices, mathematics, materials and other physical sciences to complete drawings.
* Work with CAD system creating, modifying and releasing, models, drawings and word documents under direct supervision of a supervisor for use by other departments and customers.
* Investigates design factors relative to ease of manufacturing, interchangeability, efficiency, cost and ease of procurement.
* Develop finished designs from sketches and layouts.
* Maintains an organized file system for parts, assemblies, engineering orders, and drawings prior to release.
* Work closely with all departments to ensure that the drawings convey the correct information.
* Contacts vendors to obtain necessary data and samples.
* Self-check own work for completeness, accuracy, compliance to standards, fits and stack-ups.
* Use the ANSI Y14.5 or equivalent drawing standards as guidelines.

Mandatory Qualifications and Experience:
* Bachelor’s degree or equivalent from an accredited university, college or technical school with a minimum of 5 years of aircraft design experience; or at least 10 years of related experience and/or training; or equivalent combination of education and experience.
* 3 years minimum Experience in CATIA version 5.
* Excellent knowledge of modeling and drawing practices used in the aviation industry.
* Capable of modeling complex components and producing production drawings.
* Good knowledge of GD&T.
* A good working knowledge of materials typically used in aerospace manufacturing.
* Overtime may be required on occasion

Desired Qualifications and Experience:
* Past Material Review Board (MRB) authority and experience is an additional plus.
* Some knowledge of lean manufacturing and advanced manufacturing techniques is a plus.
* CNC programming is a plus. Special training and skills should be noted on application by applicant.

The ideal candidate for this position will possess the following skills and characteristics:
* Normal physical exertion required for periods of working on foot or standing.
* Requires kneeling on occasion in performance of duties.
* Requires ability to twist, bend, squat, climb and/or other body movements to successfully accomplish the requirements of the position.
* Requires the use of either or both hands for grasping items.
* Manual dexterity and the ability to push/pull, i.e.: open/close file cabinets and/or handle machinery is required.
* Requires the ability to reach above shoulder height in accomplishing job tasks.
* Requires the ability to walk on uneven surfaces.
* Sufficient vision required to successfully accomplish the requirements of the position.
* Requires sustained periods of concentration.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129526
Job Location: San Antonio, TX
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist 1st and 3rd Shift- Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team. This is a weekend/night shift of 3 twelve hour shifts with pay for 40 hours.
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Responsible for defining and overseeing implementation of certification engineering requirements for United Rotorcraft, Federal Aviation Administration (FAA)/Organization Designation Authorization (ODA) and engineering activities. Responsible to derive, define, and apply design requirements from the regulations for implementation by technical staff. Prepare and completion of Compliance Checklists, Certification plans, Conformity Inspection Plans, and compliance summaries for assigned Supplemental Type Certificate (STC) projects. Work effectively in a multi-disciplined environment of structures, mechanical/electrical systems, and avionics commonly found in aircraft certified under 14 Code of Federal Regulations (CFR) part 25 and 27, and in US Military aircraft. Significantly impacts the company’s ability to consistently meet regulatory, commercial, and technical obligations utilizing strong problem solving skills.

• Review previously produced certification documents, drawings, technical data, and test data as benchmarks for preparation for preparation of future documents.

• As a member of the design team (project engineer, functional lead, and certification engineer), coordinate and finalize the preparation of certification documentation per project compliance check list. This includes, but is not limited to, Structural/Mechanical/ Electrical/Avionics Compliance documents, Standard Parts Lists, Commercial Parts Lists, Test Plans, Test Reports, ICA’s, RFMS’s, etc. Participate in preparation/revision of configuration control drawings, listings and indexes, and flammability requirements as required.
• Bachelor’s degree (BS/BA) in Aeronautical, Mechanical or Electrical from four-year college or university, or five to eight years’ experience in an authorized repair station working directly with records required to alter, repair, maintain and return-to-service 14 CFR part 25, part 27, and/or part 27 aircraft.
• 5-8 years analysis, design and development experience in aviation field or equivalent and related military experience preferred.
• 3-5 years’ experience performing tasks consistent with Certification Engineer 2 or equivalent experience preferred.
• Advanced knowledge and understanding of the FAA certification process, with familiarity and experience with 14 CFR and Department of Defense (DOD) regulatory requirements preferred
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager / Test Aircraft Manager

Description:
The Configuration / Test Aircraft Manager is responsible for managing test aircraft by prioritizing, documenting and controlling all configuration changes, maintenance or inspection requirements, technical directives compliance, parts removals/installs, and engine or sub-system modifications.

The successful candidate will be assigned to the CRH Flight Test Program in West Palm Beach and Fort Walton Beach, Florida. Note: could be 1st or 2nd shift.

Job Requirements:
• Manage the configuration of the test aircraft ensuring all configuration changes are documented in the appropriate system/tool.
• Provide direction and work instructions for Operations to complete the work on the aircraft.
• Coordinate with the various departments e.g. Test Director, Operations, Pilots, Safety, etc. to ensure aircraft is configured and ready to test.
• Support and implement process improvements within the aircraft management department and the site.

Educational Requirements:
• Bachelors’ degree from an accredited college in a related discipline with 3 years of professional experience, or equivalent experience/combined education.
• Masters’ degree from an accredited college in a related discipline 2 years of professional experience.
• Considered career, or journey, level.

Skills/Experience Required:
• Candidate must be a high performer
• Previous aviation/helicopter flight line experience
• Must be customer focused and a team player
• Must be self-motivated and goal oriented
• Must possess excellent verbal & written communication skills for use at all levels of the organization such as employees, management and internal/external customers
• Proficient in Microsoft products specifically Excel and Project

Additional Information:
• The assignment will be on 1st shift.
• Must be a US citizen.
• Must currently have and/or be capable of obtaining a security clearance.
• Must have valid driver's license/vehicle insurance to drive on base.
 
Job Number: 2010111152
Job Location: West Palm Beach, FL
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Design Engineer

Description:
Sr. Design Engineer


Location: Colorado Springs, CO

Contract with potential to convert to permanent




Position Purpose/Objective

The Design Engineer is charged with creating robust designs of structural components, electro-mechanical mechanisms, upholstery, cushions, decorative panels, and assemblies of these components. These designs are created using 3D CAD modeling software; and verified through finite element analyses and testing. The individual contributor will provide engineering deliverables through all phases of development from concept generation through certification testing and initial production implementation. This includes identifying root cause to issues, analyzing alternatives and executing the optimal design solutions. In addition, the individual will support efforts for design release, compliance to requirements, and internal cross-functional activities. In certain cases providing technical direction to engineering resources at our Global Engineering Center - India can be expected.




Essential Responsibilities:

Successfully execute design and development tasks required to certify and release specialty aircraft seats

Execute designs utilizing Unigraphics NX CAD system and Team Center Product Lifecycle Management software

Work as part of a cohesive engineering team and Integrated Product Develop Team (IPDT)

Understand requirements and evaluate new product structural integrity and functionality in support of meeting those requirements

Facilitate necessary regulatory and customer requirement testing to ensure product safety

Interact with internal and external customers and ensures satisfactory deliverables

Assist Engineering Management to coordinate the timely delivery of product design and customer proposal requests

Conceptualize and prepare preliminary and final detail design and documentation of systems components and assemblies

Support testing including the design and release of test fixtures

Create conceptual designs for proposals and document designs in technical documents

Work as a liaison with multi-site technical teams in Peshtigo WI, India, and Poland

Adhere to all UTAS rules and codes of conduct

Perform other duties as required




Education Required:

BA/BS Aerospace or Mechanical Engineering degree with at least 5+ years’ experience

MA/MS Aerospace or Mechanical Engineering degree with at least 2+years’ experience




Experience Required: Indicate the minimum years of experience and type of experience required to effectively perform the essential functions and responsibilities of this position.

At least 5 years working as a design engineer, preferably in a manufacturing environment

Strong communication skills

Strong interpersonal skills and ability to work in a team environment

Strong analytic skills including Root Cause Analysis, Strength of Materials, Statics

Unigraphics/NX CAD experience




Preferred:

Experience presenting solutions to internal and external customers

Experience with manufacturing processes (machining, sheet metal, plastic injection molding, plastic thermoform. . . )

Experience with Plant Operations and Assembly

Experience with Finite Element Modeling and Analysis

Experience working with international engineering support

Knowledge of upholstery design and execution

Team Center and Team Center Multi Site PLM experience

Experience in aerospace requirements/design

Knowledge of FAA and aerospace specifications

International design collaboration experience







Travel:


10% of time traveling




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55340
Job Location: Colorado Springs, CO
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Clearfield, Utah ) S6742917 & 8024350

Description:
Design Engineer ( Clearfield, Utah ) S6742917 & 8024350
12 Month Contract

Pay rate: $60-75 /hr

JOB DESCRIPTION:
• Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis. Experience is design of laminates, sandwich structures, and bonded and bolted assemblies
Top three skills:
• Must have an active clearance with an investigation within the last 4.5 years
• BS in Engineering with a minimum of 10 years related experience in design engineering function
• Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design

Experience Requirements:
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
• **Must have an active clearance with an investigation within the last 4.5 years (or 4 years 6 months)**
• BS in Engineering with a minimum of 10 years related experience in design engineering function
• Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
• Experience leading a team of engineers
• Assembly level design including establishment of data schemes and tolerance analysis
• Knowledge of composite materials and manufacturing processes
 
Job Number: S8024350
Job Location: Clearfield, UT
Rate: 75
Per Diem: Split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ENGINEERING INSTRUMENTATION STRAIN GAGE TECHNICIAN

Description:
Engineering Instrumentation Strain Gage Technician

Stratford, CT

15+ Months Contract Opportunity

Perform strain gage installations required to support ongoing Engineering Flight and Ground test operations.

Must have knowledge of strain gage bridge wiring methodology.
Must be able to apply gages to aircraft and facility components manufactured from of a variety of metals and composites making them Load Measuring Sensors.
Must have experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding.
Must have experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 367119
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5 preferred
2) Gulfstream Completions electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10108
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 4

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
•AutoCAD required, Catia V5and CHS preferred
•Experience with power distribution, lighting, switching, sizing and routing.
•Familiarity in mechanical system design
•Familiarity with aircraft STC procedures preferred. 9GV,GVI, and GVII electrical system design experience preferred.
•14 CFR 25 Subpart H - EWIS experience preferred
•Part 25 Certification Experience for Cabin Interiors preferred
•Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
•Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
•Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
•Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
•Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
•Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
•Is consulted extensively by associates and others as a recognized authority within the field
•Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
•Approach to problem solving balances technical product, cost and schedule
•Works without appreciable direction; work is reviewed from a long-range perspective for desired results
•Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 5

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

1) AutoCAD required, Catia V5and CHS preferred
2) Electrical system design experience preferred
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 24-311
Job Location: Savannah, GA
Rate: $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Supervisor, the Electrical Engineer will be responsible for the planning, design and oversight of the installation, operation and maintenance of electrical components, equipment and systems.  They will perform standard engineering assignments usually representing a significant portion of a larger project and will select engineering techniques to solve problems and make design recommendations.





Electrical Engineer participates as a team member in a specific phase of a broad engineering assignment.
Directs preparation of appropriate documentation for assigned projects.
Provides technical leadership to a small group of temporarily assigned engineers and technicians.
Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
Participates in defining engineering approaches, and in planning and scheduling work.
Cover the capacity gaps in documentation for delivery milestones.






Bachelor’s Degree from a four-year college or university and a minimum of five (5) years’ experience 




Aircraft electrical design experience
Experience with Catia
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Subsystems Lead Engineer

Description:
Seeking an Electrical Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Electrical Power Generation System (EPGS), Electrical Power Distribution System (EPDS), Electrical Wire Interconnection Systems (EWIS) and the Science of Electrical Engineering (G&B, EMC, EMI, HIRF, LSP, etc.). The successful candidate will manage the various electrical systems design and completion partners, as well as all design and certification activity required. The Electrical Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop electrical systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of electrical systems
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Perform electrical systems tests and certification, and provide system and certification documentation
• Manage the electrical subsystem scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Electrical subsystem resources to meet the milestones of the AS2 program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing electrical systems from concept through certification strongly desired
 
Job Number: 42-004
Job Location: Reno, NV
Rate: DOE, but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness 3

Description:
RESPONSIBILITIES:
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.
Responsibilities will include drafting of electrical cable designs and electrical assemblies for aerospace programs utilizing AutoCAD Electrical. Create preliminary block diagrams, wiring diagrams and detailed assemblies such as cable assemblies, Circuit Breaker assemblies, Relay assemblies etc. Candidate will work with a team to develop work products that are generated in accordance with existing templates, checklists and standards. Work products are peer reviewed for design accuracy and quality. Must have a basic understanding of electrical engineering concepts.

REQUIRED EXPERIENCE:
High School diploma or equivalent and 4 years' additional education and/or related experience.
Preferred Qualifications:
Experience developing drawings to ASME Y14.X standards, using CPLM or similar configuration management tools. Knowledge of instrumentation wiring applications, TEMPEST design constraints on electrical cable wiring, EMI/EMC effects on electrical cable wiring, aircraft-type cable assemblies and MIL type wiring and components such as connectors, back shells, shielding techniques, using design direction from Electrical Engineers. Microsoft Office and strong verbal and written communication skills and ability to work as a team are preferred.

EDUCATION:
High School diploma or equivalent is required.

HOURS:
9/80 workweek

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.

Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.



© 2018 Chipton‑Ross Inc. All rights reserved
 
Job Number: 176062
Job Location: melbourne, FL
Rate: Up to $27.00 DOE
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: chris conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
Electrical wiring and Harness Design
Wiring standards and best practice design
Aircraft zonal requirements and coordination
Power, ground, signals, and databuses
Wire gauge and type consideration
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector compatibility, pin selection, ect.)
Misc. electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, ect.)
Development of configuration managed, electrical harness design packages
Parts list, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and Harness Drawing Generation
Interpretation of system interface control data to conceptual schematics for point-to-point wiring connections between units
Evolution of conceptual schematics into aircraft wiring information
Coordination of 3D data for implementation into harness drawing packages
Creation and knowledge of drawing part number changes vs. drawing revisions
Use of wiring design tool to generate wire diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic system
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Databus and digital equipment interface considerations


Qualifications

BSEE or equivalent technical training, and a minimum of 5 years applicable industry related work experience in wire design
Experience with IGE-XAO SEE Electrical Expert is preferred; Mentor Graphics, Autocad, Zuken, or similar smart wiring design tool is required
Good working knowledge with Microsoft Office suite (Word, Excel, and PowerPoint) is required
Good working knowledge with Teamcenter for releasing wire diagrams and harness drawings, or familiarity with other PLM systems (such as SmartTeam, etc.) is desired
Good working knowledge with Electrical Wiring Interconnect System (EWIS) is desired



The Structures Company is an AA/EOE.
 
Job Number: 229
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Maintenance Technician I

Description:
This position is for an alternative work shift that works 4-10hr days Thursday-Sunday.

Our client is looking for an Electronics Technician Maintenance to work in Lexington, Kentucky! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Repairs, replaces, and rebuilds electrical system wiring, connectors, and components using hand tools, power tools, and applicable test equipment.
* Fabricate harness and electrical assemblies.
* Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to accomplish work.
* Work under close supervision receiving technical guidance from supervisor or higher-level technician.
* Work is checked frequently for accuracy.
* Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools and applicable test equipment.
* Experience in utilizing electrical test equipment such as digital multi-meters and oscilloscopes.
* Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals

Mandatory Qualifications and Experience:
* Minimum 2 years’ experience installing and testing of aircraft electrical/avionics systems.
* Successful completion of a military or civilian equivalent electrical/avionics training course.
* Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals/technical orders.
* Must have a Secret clearance.
* Able to work an alternative work shift of 4-10hr days Thursday-Sunday.

Desired Qualifications and Experience:
* Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
* Experience soldering.
* Experience with harness fabrication

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129531
Job Location: Lexington, KY
Duration: 3 months
Start Date: 01/21/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FLIGHT SUPPORT OPERATION

Description:
JSG is looking for a Flight Support Operation for a 15+ months contract in Pax River, MD!

Perform a variety of tasks involving day-to-day flight operations administrative activities supporting Flight Operations.

Job Duties/Responsibilities:

Working with various centralized groups on a variety of issues such as flight crew availability, aircraft scheduling and daily schedule preparation and tracking.
Prepares daily flight schedule and DCMA Form 644.
Coordinates with flight test directors and test pilots to build short and long term “look-ahead” planning of resources.
Coordinates with US Navy personnel to obtain flight and aircrew approvals as well as US Gov’t assets.
Maintains pilot flight records per current FTOP and US Gov’t procedures ensuring contractual adherence.
Exercise independent judgment in reacting to unanticipated situations within policies, the Director of Flight Operations, Manager of Flight Operations and others.

Experience/Qualifications:

Bachelor’s Degree in Aviation Administration or equivalent demonstrated work experience.
Other combinations of experience and education may be considered.
Experience in airport administration activities or a professional aviation position – Highly Preferred
Prior experience/knowledge of US Navy Base operations – Highly Desired
Candidate must have strong analytical skills and be highly detail-oriented.
Must have excellent oral and written communication skills • Ability to work with minimum supervision and interface effectively with internal and external customers
Proficiency with MS Office/Window applications/databases Required.
Must be able to obtain US Military Common Access Card.
 
Job Number: 367419
Job Location: PAX RIVER, MD.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
First Article Inspector (Quality Inspector)

Description:
This position is in Huntington Beach California. It would be in support of an Aircraft Interior Manufacturer and their end item customer. The position is to complete source inspections of Interior Modules following final inspection by their internal Quality Assurance Inspectors to better assure the Quality of the Modules. There is no time frame on the job but the right person could be with the customer quite a while.
 
Job Number: 1001
Job Location: Huntington, CA
Rate: Hourly Rate
Per Diem: Yes
Overtime: Yes
Duration: 3 plus months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: EXPLEO USA INC
Attention: Faith Brooks
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flammability Engineer

Description:
Flammability Engineer
Apply your leadership and technical knowledge in a professional role:
Collaborate with leaders from multiple teams and different sectors
Work within a global organization – position located in Mobile, Alabama
About the Role:
We are looking for a Flammability Engineer to join our team and work for our global client based in Mobile, AL.
Responsibilities:
Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
Generate certification plans and support the creation of compliance statements in support of major projects.
Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
Coordinate with suppliers during development phase of the equipment to ensure that compliance to clients requirements are satisfied.
Define the certification requirements to support aircraft modification in accordance with customer's request.
Review and approve clients internal and vendor test plans and reports, including witnessing testing as required.
Ensure that the design can be certified and all the necessary data for test and certification is produced.
Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and clients engineering organizations.
Generate reports as required. Reviews and approves suppliers compliance reports.
Create and ensure that the engineering is robust and meets integrated project requirements.
Perform other tasks as assigned
Qualifications:
Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 or 25 cabin interior and flammability requirements.
A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies.
Minimum of 5 years in aircraft certification or 3 years in flammability certification, cabin experience preferred.
Ability to write reports and technical
Strong liaison with other departments both internally and internationally.
Education: BS Engineering Degree strongly preferred
Where you will be working
You will have the chance to join an incredible diverse and global team of engineering. You will be invited to put your expertise in challenging project around the world.
About us
We are at the heart of a technological revolution that will permanently transform our patterns of mobility, consumption, production and communication.
We are the biggest industrial players to design the products and services that will make the world of tomorrow. We are recognized by our clients for our ability to carry out such projects, with rigor, efficiency and sense of service, in compliance with our commitment to quality and our values.
Creating the new Engineering 4.0
ASSYSTEM TECHNOLOGIES valued opportunities opened by this new technological age very early on. For industry 4.0, we are designing products and services, projecting their applications into the future and anticipating the next round of developments. We are dreaming up tomorrow’s world.
 
Job Number: 2001
Job Location: Mobile, AL
Rate: Open
Overtime: Yes
Duration: 6 month contract plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: EXPLEO USA INC
Attention: Faith Brooks
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences Engineer

Description:
We are seeking a Flight Sciences Engineers for an exciting new aircraft project here in Moses Lake, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.





Roles
•Define and validate flight test specifications

•Perform data review and analysis for verification of aircraft level requirements

•Utilize flight simulation models and data

•Support ground and flight test activities

•Prepare flight test reports



Requirements
•Experience with FAA Part 25 or Part 23 aircraft certification

•Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.

•Ability to represent the client professionally and positively during client interactions and meetings.

•Bachelor or advanced degree in Aerospace Engineering.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

•Support engineering with test plan creation.

•Discuss, write and review test cards and test hazard analysis

•Support and/or lead test preparation activities, test execution, post-test activities

•Support and/or lead pre and post flight briefings.

•Monitor live flight data, either via telemetry or onboard flight test aircraft

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety of flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate restrictions/ limitations documentation.

•Update monitoring screens for specific testing and/or restriction monitoring.






Requirements



•5+ years relevant work experience related to experimental flight test operations.

•Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.

•Strong ability to analyze results

•Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.

•Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities and Control Law Lead Engineer

Description:
Handling Qualities and Control Law Lead Engineer
Location: Fort Worth, TX (76118)
12-18 Months

Tasks/Requirements:
- Creating analytical and simulation models of the designs
- Aircraft Stability and Control Design and Analysis
- Conducting wind tunnel tests, reducing data, and incorporating results into simulation math model
- Developing aircraft Control Laws and integrating these into flight simulation programs
- Linear and non-linear analysis of flight control systems
- Analyzing the aircraft handling qualities and comparing results to aircraft requirements and specifications
- Conducting aircraft flight tests of model and full-scale designs
- Interface with other functions and management on the program

Familiarity with the following is preferred:
· Wind tunnel testing
. 6 degree of freedom simulation models
. Model-based systems engineering
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
· ADS-33 and other Handling Qualities specifications
. Aircraft Parameter Identification
. Control Law Optimization
· Aircraft flight test
· Experience with Enovia, DOORS, and Serena Dimensions
· Flight control system development and testing in a systems integration lab
· 14 CFR Part 27 and Part 29 for commercial rotorcraft certification



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54731
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Subsystem Lead Engineer

Description:
Seeking an Hydraulics Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Hydraulics system for the a supersonic business jet. The successful candidate will manage the hydraulics systems design and completion partners, as well as all design and certification activity required. The Hydraulics Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop hydraulics systems design, architecture and product plan, including qualification and certification plans.
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of hydraulics systems
• Define requirements for the hydraulics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of hydraulics systems requirements
• Perform hydraulics systems tests and certification, and provide system and certification documentation
• Manage the Hydraulics subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Hydraulics subsystem resources to meet the milestones of the program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position.
• Master’s degree in a technical and/or management specialty preferred.
• 10+ years of deep, hands-on experience in Hydraulic systems development, design and testing in Military, Commercial and/or business jet aircraft.
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired.
• Recent experience in developing hydraulic systems from concept through certification strongly desired.
 
Job Number: 42-002
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Location: Fort Worth, TX
Rate: $70.00/HR
Duration: 6 month contract
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Bachelors degree REQUIRED****

Job Description:
- Drive continuous improvement in assigned build area.
- Partner with build team leadership to identify high priority improvement opportunities.
- Collaborate with appropriate stakeholders (especially the mechanics) to execute improvement projects and to ensure gains are sustained.

Requirements:
- Bachelor's Degree required.
- 10+ years in aerospace/aviation/aircraft manufacturing.
- Experience using fundamental lean tools (6S, PDCA, Visual Management, etc).
 
Job Number: 10146
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer CA

Description:
163564 Industrial Engineer 3/4 (Job Number: 18024363)
Work Site Address : El Segundo CA
Job Number: 1702
Max Pay Rate: 46.00

Start Date: ASAP
End Date: 12 Months
Position Type: Contract

Responsibilities:

1. Helps determine the most efficient sequence of operations and work flow and provides finite scheduling to manufacturing cost centers and IPTs
2. Maintains datasets and generates metrics that provide for the measurement of program & functional schedule & cost performance.
3. Develops and deploys plans that ensure the timely availability and effective utilization of labor, facilities, equipment, & tooling resources enabling the achievement of program delivery and cost milestones.
4. Develops and summarizes analyses for the acquisition, maintenance & enhancement of capital assets and miscellaneous equipment. Plans plant, office, and production facilities and equipment layouts
5. Provides capacity planning and rate tool analyses
6. Conducts studies pertaining to cost control, cost reduction and inventory control
7. Can run simulation based scenarios using software
8. Help develop new program start up requirements & modeling capability

Qualifications and Education Requirements
Bachelor of Science Degree (STEM) with 4 or more years related experience;
or Master’s Degree with 2 or more years related experience

Preferred Skills
Military Aircraft Operations Experience or Space Product Knowledge
Documented experience working in a robust IPT environment
At least 1 year of demonstrated experience participating and leading project teams
Strong expertise using the full suite of Microsoft Office Tools
 
Job Number: MB-1702ATO
Job Location: El Segundo, CA
Rate: 46/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Group Leader

Description:
We are seeking a Interior Group Leader to lead a team of 50+ Interiors Engineers and Certification specialist to navigate through the Design, Test and Certification process for and exciting new aircraft project here in Seattle, WA. Business trips to required sites may be requested, including Nagoya, Japan and Moses Lake where engineering tasks.


Responsibilities:
•The employee will work as the Group Leader for the Interior Team within the Interiors Office in Seattle. Leadership activities include, but not limited to:

•Lead a team of 50+ Interiors Engineers and Certification specialist to navigate through the Design, Test and Certification process for aircraft.

•Promote and ensure personnel performance from the Seattle Office, while influencing the Nagoya Team performance where practical.

•Manage team objectives and Goal setting, and adopt and support company Performance Measurement tools when available.

•Promote and ensure team integration in Seattle office and with other IPT’s.

•Drive and promote Integration activities between Nagoya and Seattle teams.

•Remove roadblocks and provide solutions to both technical and managerial challenges.

•Ensure processes are followed. Champion tool and process improvements to increase team efficiency where necessary.

•Support task prioritization and achieving deliverables. Provide adequate distribution of workload to ensure projects are completed timely.

•Communicate and Escalate to Seattle/Nagoya Leadership as appropriate.

•Balance and Identify Resource gaps to enable on time delivery of aircraft deliverable’s. Support and drive resource gap closure.

•Support reporting key metrics to management and Program Managers to ensure correct visibility is given to key issue

•Provide Technical direction to the team to enable development and finalize T/C design, compliant to all applicable requirements. This activity includes, but not limited to:

•Evaluating the current aircraft design, with respect to compliance to the Interiors commodities and related airworthiness regulations of JCAB, FAA and EASA.

•Conduct design review of interior components,

•Coordinate with system suppliers for the design, certification, and development schedule.

•Create and/or review qualification test plans for interiors commodities.

•Review certification plan for Interiors commodities,

•Managing schedule of design and certification activities for Interior commodities, with related personnel.



Requirements
•Minimum 15 years Engineering Experience with at least 10 years in the Aerospace/Aircraft industry, with a high preference for Commercial Aircraft Cabin Interiors.

•Equipment Qualification and Cabin Certification experience is mandatory.

•Demonstrated people leadership experience, managing teams of 50+. Ability for focus on key deliverables and find solutions to problems, and while guiding the team forward.

•Must be culturally sensitive, with preference of previous working experience within a Japanese working environment.

•Experience managing Aerospace Supply Chains under pressure and hitting tight deadlines, with exposure to commercial negotiations and contracts preferred.

•Must be flexible with working hours to support Japanese working time zone.

•Ability to work and reside full time in Seattle, USA mandatory.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior/Mechanical Design I (Long Beach, CA)

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Education and Experience Requirements:
•Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Unique Skills:
• Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams.
• Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems.
• Business/Executive jet interior experience required.
• Attention to visual appearance/ aesthetics of completed designs is very important.
• Excellent communication skills and ability to work with operations technicians on the shop floor is required.
• Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus.
• Catia V5/SmarTeam experience required. Catia V4 experience a plus.
• AutoCAD experience preferred.
• Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. Strong written and verbal communication skills required.

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-298
Job Location: Long Beach, CA
Rate: $51-$56
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior/Mechanical Design II (Long Beach, CA)

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams.
• Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems.
• Business/Executive jet interior experience required.
• Attention to visual appearance/ aesthetics of completed designs is very important.
• Excellent communication skills and ability to work with operations technicians on the shop floor is required.
• Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus.
• Catia V5/SmarTeam experience required. Catia V4 experience a plus.
• AutoCAD experience preferred.
• Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. Strong written and verbal communication skills required.

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-297
Job Location: Long Beach, CA
Rate: $66-$74
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interiors Project Engineer

Description:
We are seeking a Interiors Project Engineer for an exciting new aircraft project here in Seattle, WA. The Project Engineer will work and support activities within the Cabin Safety Interior System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain Information of any task assigned contributing to the aircraft and Interior System development and Certification.

•Establish and track KPIs that highlight bottlenecks.

•Identify performance concerns against a plan.

•Maintain risks & opportunity register on Sharepoint.

•Resource plan monitoring loading.

•Provide support to PM /GL tasks as necessary.

•Support Microsoft Project updates and weekly reports.

•Preparation of material and facilities for engineering meetings.

•Governance reporting work for PMO/EMO, daily/ weekly/monthly.

•Chase stakeholders and hold accountable for information’s provided.

•Keep JCAB test schedule topical for CMO before submission.

•Prep IPT PM reviews.

•Support budget planning and tracking.

•The primary work locations will be in either Seattle, WA or Nagoya, Japan. However, engineers maybe requested to travel to support business needs as requested.



Requirements
•+5 years of aerospace project experience, with aircraft interiors knowledge preferred.

•Fluent in English, with Japanese language skills desirable.

•Good computer skills (MS Word, Excel, Power Point, Microsoft Project).

•Attention to detail and organized.

•Ability to interact respectfully with others.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel System Designer (Entry Level)

Description:
General Summary:

The Entry-Level Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

Duties and Responsibilities:
• The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
• The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage task execution to ensure on-time and on-target completion

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree in an engineering related discipline
• Minimum of 3 years of previous design experience

Knowledge, Skills and Abilities:
• Experience with Catia V5
• Familiar with Microsoft Office Products
• Familiar with FAR Part 23 or Part 25
• Familiar with Industry standards

The Structures Company is an AA/EOE.
 
Job Number: 257
Job Location: NC
Rate: $35-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
LEAD SYSTEM ENGINEER

Description:
JSG is hiring for a Lead System Engineer for a 15+ months contract opportunity in Startford, CT!

Description:

Seeking a System Engineer for assignment to the Canadian Maritime Helicopter Program (CMHP). The responsibilities of the System Engineer will include, but are not limited to: Requirements Management, Risk Management, System Integration and Issue Resolution, Verification Planning, Trade Study activities and Technical Review coordination in support of their assigned platform. The candidate will be selected and assigned based on their specific skills and/or experience in any one of the above listed areas.

Requirements Management will include the analysis, decomposition and allocation of high-level requirements.

Requirements management is performed using the DOORS database application. Experience and proficiency with the requirements management tool DOORS is required.

Risk management will include risk identification, risk assessment and risk mitigation plan definition of system level risks on the assigned platform.

System integration activities will include participating in the resolution and clarification of inter-segment and inter-IPT requirements and responsibilities. Once problem areas are identified, the system engineer will assist in refining, clarifying and communicating the necessary requirements as needed to resolve these concerns.

This job requires an understanding of the operation and interrelationships of aircraft systems; an appreciation for the impact that configuration changes may have on performance related attributes, cost and schedule.
BS degree in an engineering discipline is required.
7+ years of experience in system engineering, design or the analysis, of helicopter systems and technologies is desired.
 
Job Number: 367140
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear System Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 259
Job Location: NC
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Stress and Structural Engineer

Description:
Lead Stress and Structural Engineer

Location: Englewood, CO

Job Description: Lead Stress and Structural Engineer with a minimum of 8 years of aerospace stress work needed. Blackhawk experience is a plus. Having leadership experience is a requirement.

Min years of experience: 8 year analysis experience; previous experience in design, analysis and certification of aircraft systems working with engineering staff of military and civilian aircraft manufacturers. Leadership experience is a must.



Degree Requirements: Bachelor’s Degree (BS) in Mechanical, Aeronautical, Aerospace engineering or related engineering field from four year college or university and 8 years related experience and / or training or equivalent combination of education and experience



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55640
Job Location: Englewood, CO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 01/14/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Electrical Systems

Description:
• Assesses and resolves product/process issues through the product lifecycle.
• Support daily production, completions and delivery operations
• Assist with production, quality and the customer; provide engineering with dispositions of Material Review Board/concessionary requests & resolution of query’s raised on all assigned projects
• Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
• Leads others to analyze, conduct root cause analysis and develop dispositions for design non-conformances
• Work in close cooperation with other engineering disciplines to achieve the company’s business objectives.
• Maintain a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy and effectiveness of company products
• Develops and implements product/process improvements
• Recommend new processes where needed for quality improvement, cost reduction and on-time delivery.
 
Job Number: 18-819
Job Location: Northeast
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163802
1296-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/29/2019
End Date: 1/28/2020

Job Description:
Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

**Flexible working hours required

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly

Experience
Software Skills SAP No 1
 
Job Number: JE-1296-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer

Description:
Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of automated processes. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction. Responsible for implementing automated equipment and processes for use on airplane composite wing assembly. Job responsibilities will include the daily production support of equipment and processes on 3rd shift plus weekend days as needed with a focus on automated drilling and fastening in CFRP, Al, & Ti, and supporting operations/processes.

Skills:
Aircraft structures assembly
Assembly Process
Drilling
Interpret schematics, assembly drawings, technical manuals
Robotics

Education: Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MPP2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Systems or Structures

Description:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems

Duties and Responsibilities:
• Resolves complex engineering problems related to the build of the aircraft
• Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required
• Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working
• Reviews, develops, and implements revised/new processes using six sigma/lean principles
• Provides an acceptable disposition of non-conformance of commercial mechanical systems or structures encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects
• Documents how to repair the discrepancy using engineering principles
• Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings
• Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality
• Incorporate design changes using CATIA V5

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelor's degree in Engineering or related field of study
• 6 years’ experience serving as a Liaison for MRB Structures is required
• Computer proficient with experience in Microsoft Office Programs (SAP a plus)
• Excellent written and oral communication skills

Knowledge, Skills and Abilities:
• Experience with MRB design, or repair of structures
• Knowledge of corrosion prevention
• Knowledge of non-destructive testing
• Advanced knowledge of Aircraft Structures or Systems
• CATIA V5, and Standard Repair Methods (SRM)
• Extensive experience with Six Sigma

The Structures Company is an AA/EOE.
 
Job Number: 245
Rate: $55/HR
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist - Lathes - 2nd Shift - Aerospace - Everett, WA

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist - Lathes - 2nd shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical college or equivalent experience in industry.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist Millturn - 2nd Shift - Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist Millturn - 2nd Shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer with Acrylics Background

Description:
Requirements:
Manufacturing Engineer with a background in aircraft windows and acrylics preferably, but someone outside of the aircraft industry would be considered. Must have 5 years of experience working as an ME.

Computing systems used: CATIA V5, SmarTeam, SAP, Solumina, Excel, PowerPoint, Word

The Structures Company is an AA/EOE.
 
Job Number: 258
Job Location: OK
Rate: $55/Hr. ***DOE***
Per Diem: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer - Transparencies

Description:
Must have 8-10 years of M&P experience in the aircraft industry, specifically aircraft transparencies (windows).

Experience with helicopter and commercial aircraft is preferred, but will consider automotive industry.

Well over a year in duration and could possibly go direct.

The Structures Company is an AA/EOE.
 
Job Number: 256
Job Location: OK
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Duration: 9 month contract
Shift: 1st or 2nd shift and weekends.
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Bachelor's Degree or Master's Degree required****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.


Requirements:
- Experience with Architecture of hydraulic systems
- CATIA V5 experience.
- Experience generating subsystem layouts and designs.
- MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
- Self-motivated and ability to work in a fast paced aircraft design environment.
- Experience leading small engineering teams
- Microsoft Office proficiency.
- Excellent oral and written communication skills.

Education:
Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10236
Job Location: Palmdale, CA
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / Catia V5 / hydraulic systems - Clearance CA

Description:
Engineering - Mechanical Engineer
Work Location: Palmdale, CA
Status: Open
Rate: Open
Qty: 1
Desired Start Date: 1/21/2019
End Date: 9/27/2019

**Position requires people experienced in hardware integration, troubleshooting, and MRB (e.g., identifying workarounds & resolving trouble tickets). The build phase is on an aggressive schedule and having additional help with help meet the schedule milestone.

Job Description:
Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.

o Experience with Architecture of hydraulic systems
o CATIA V5 experience.
o Experience generating subsystem layouts and designs.
o MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
o Self-motivated and ability to work in a fast paced aircraft design environment.
o Experience leading small engineering teams
o Microsoft Office proficiency.
o Excellent oral and written communication skills.

**Must be able to work 1st or 2nd shift and weekends.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1309-1S5
Job Location: Palmdale, CA
Rate: open
Per Diem: no
Duration: 9 months
Start Date: 1st or 2nd shift and weekends
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician CA

Description:
163665 Job ID# 21501BR
Title Mechanical Technician
Job Summary General Atomics (GA), and its affiliated companies, is one of the world’s leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

The Computer and Diagnostic Systems DIII-D/ITER team within the Energy affiliate company of General Atomics is seeking a talented Sr. Technician to work out of the Torrey Pines, CA office.

DUTIES AND RESPONSIBILITIES:

Under limited supervision, the Sr. Technician will be responsible for:•Responsible for fabrication, modification, installation, and documentation of complex laboratory, experimental or commercial equipment, including diagnostics (instruments)
•Interprets general instructions or detailed mechanical drawings, plans sequence of assembly, maintains quality assurance documentation and prepares sketches and schematics, with a working knowledge of RF and High voltage engineering principles
• Assist in the design and maintenance of basic lab, experimental, and commercial equipment.
•Maintains a clean and organized work space.
•Operates specialized equipment and/or performs tests requiring knowledge of processes pertinent to the organization, program or project.
•Responsible for execution of a set of laboratory experiments or for a complex laboratory function.
•Diagnoses and corrects operational problems or trouble sources in equipment or tests. Interprets basic information displayed to recognize when various operating measurements are drifting out of established parameters. Adjusts operating parameters to bring systems back to satisfactory operating conditions. Develops solutions to problems that occur including assisting in the design of specialized components.
•May provide direction to other technicians or craft personnel in construction and maintenance of equipment, operation of tests, or laboratory.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
•Perform other duties as assigned.


Qualifications Essential Qualifications Typically requires associate's degree or equivalent with seven or more years of experience. May substitute equivalent experience in lieu of education. Ability and willingness to work on systems which have unusual conditions such as high pressure, high voltage, high energy, cryogens, or radioactive materials. Knowledge of computer operations and applications pertinent to the field required. Must have analytical ability to read and understand detailed instructions, drawings and specifications. Communication skills necessary to write and record precise information. Special skills and expertise to use complex equipment or experimental techniques.
Additional Qualifications - Requires Associate’s degree or equivalent, with seven or more years of experience. May substitute equivalent experience in lieu of education.
- Ability and willingness to work on systems under unusual conditions involving high pressure gasses, high voltage, cryogens, high energy, radioactivity, etc.
- Proficiency in 3D CAD software such as Solidworks.
- Experience with various machining techniques (lathe, mill, CNC, etc.) and vacuum systems.
- Skill with soldering high precision assemblies.
- Must have analytical ability to read and understand detailed instructions, drawings and specifications.
- Must be able to lift up to 25 lbs.
- Communication skills necessary to write and record precise information.
- Experience with lasers, high voltage, RF electronics and basic knowledge of physics and electrical engineering is desired.
- Pay rate: $30-$35/hour
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 5/40

Temp Assignment Duration (# of Days) 180
 
Job Number: JE-21501
Job Location: San Diego, CA
Rate: 30-35/hr
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Testing Engineer

Description:
Job Description:
Support 3rd Shift testing in the Integrated Test Vehicle laboratory. Responsibilities include, but are not limited to, communicating with the test team to configure, monitor and maintain the laboratory test setup (includes complex Hydraulics, Electronics and Mechanical Systems). Opportunity exists for expanded mechanical design work. This is a hands-on role that provides the opportunity to be part of a unique test team performing work class testing on advanced aircraft systems.

Education:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: TE2018
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT DESTRUCTIVE TESTING - LEVEL 3 ENGINEER

Description:
JSG is hiring a Product Integrity & Quality Controls Engineer for our Client in Stratford, CT!

This is a position for a Non Destructive Testing (NDT) Level 3. In this position, located in Stratford, Connecticut, you will be primarily developing Ultrasonic (UT) nondestructive test instructions for composite components. Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Sikorsky Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT level 3's, Level 2’s, and Engineering technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification). Prepare and review engineering specifications. Develop and evaluate new equipment and technology. Provide technical support to manufacturing, engineering, programs, field personnel, and suppliers. Audit internal and external NDT inspection facilities. Participate in development of NDT training course material for level I, II, and III. Test and certify NDT level I, II, and III inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications :

Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT).
Ability to certify to NAS 410 Sikorsky UT level 3 requirements within 90 days of employment.
Including vision correctable to 20/25 in at least one eye.
Experience performing Ultrasonic NDT on Composite materials.
Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
Must be a US Citizen or legally authorized to work in US as a permanent resident.
Desired skills :

Composite UT experience on aerospace components.
Level 3 Eddy Current (ET) certification, and Fluorescent Penetrant (PT) level 3 certification are a plus.
Bachelor's degree or above in Engineering or Technology discipline.
Documented 5-10 years of aerospace nondestructive testing.
Technical writing experience.
Non-destructive test (NDT) experience with composite structures.
The ability to collaborate and work well with fellow team members.
Experience using CATIA or other 3D modeling software a plus.
Familiarity with NAVAIR Nondestructive inspection manuals and processes.
Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 369310
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Office & Property Coordinator

Description:
We are seeking a highly organized individual to fill the role of Office and Property Coordinator for an exciting new Aircraft project here in Moses Lake, WA. The Office and Property Coordinator is responsible for:

•Administer office activities and maintains onsite properties.

•Develops procedures and policies for administrative activities, such as records maintenance, document preparation, mail distribution, reception, and other related internal operations.

•Works to find improvements or additions to services or processes.

•Purchases and maintains office and property equipment.

•Tracks and analyzes operational costs.



Requirements
•Requires previous experience in an office and property administrative/coordination job on an industrial level.

•The skill to make and analyze administrative procedures is also required.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Lead Engineer

Description:
Seeking a Powerplant Subsystems Lead Engineer with strong experience enabling him/her to be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU) and fire protection for a supersonic business jet. The successful candidate will manage the powerplant subsystems design and system suppliers, as well as all design and certification activity required. The Powerplant Subsystems Lead Engineer will report to the Director of Propulsion IPT.

Duties include, but are not limited to:
• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans.
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems.
• Define requirements for the powerplant subsystems to ensure compliance with regulations/customer requirements
• Provide validation and verification of powerplant subsystems requirements.
• Perform powerplant subsystems tests and certification, and provide system and certification documentation.
• Manage the powerplant subsystems scheduling, budget, resources and suppliers.
• Report subsystem status to ensure milestones are met in support of the overall program schedule.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of resources to meet the milestones of the program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position.
• Master’s degree in a technical and/or management specialty preferred.
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft.
• 2+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired.
• Recent experience in developing powerplant systems from concept through certification strongly desired.
 
Job Number: 42-003
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Precision Structural Assembler

Description:
seeking 10 Precision Structural Assemblers for an opening in Mesa, AZ.

RESPONSIBILITIES:
Lays out, fabricates assembles, mates, installs and functionally tests, checks or troubleshoots, and repairs production and
prototype aircraft structures, parts and assemblies, mechanical and pneumatic. Performing work in this job occupational
field requires the application of procedures, processes, and methods learned through technical and on-the-job training.
Major Tasks and Responsibilities
- Reads and interprets information from mechanical/structural, blueprints, planning, process specifications, diagrams, engineering drawings and sketches, and other instructions to determine the methods and sequence of operations to layout, assemble, and install precision parts and assemblies.
- Lays out coordinated hole patterns, cutouts, trim lines, mating points, assembly and installation locations using precision measuring instruments and equipment.
- Assembles and mates aircraft parts and assemblies.
- Attaches structural parts and assemblies using riveting and hand and power tools, hand trim and finish.
- Drills, routes, reams, countersinks, spot-faces and counter bores parts. Modifies or rebuilds parts to mold line or configuration changes.
- Modifies aircraft structure, installation and mechanical systems as directed and in accordance with engineering requirements.
- Fabricates, assembles, installs, hooks up, rigs and troubleshoots hydraulic, pneumatic and mechanical assemblies, subassemblies, operating mechanisms, electro-mechanical or hydro mechanical, parts and assemblies.
- Functionally checks, diagnoses, locates and corrects malfunctions, reworks/repairs any aircraft assembly, pneumatic, plumbing, hydraulic, mechanical, and rigging systems and structures and installations during assembly operations.
- Performs experimental and developmental work operations on experimental aircraft or assemblies.
- Assembles prefabricated parts into assemblies and mate major sections of aircraft assemblies.
- Incorporates major engineering changes and modifications.
- Improvise and fabricate temporary tooling, holding fixtures, and templates.
- Use hand and power tools, layout tools, hoists and mechanical lifting equipment, test fixtures, functional test equipment and precision measuring instruments.
- Records fabrication, assembly, functional check data and statistical data manually or with the aid of computer or computer-bases system.
- Performs work in both FOD critical and FOD sensitive environments and ensures all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues.
- Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gages and scales.
- Report all non-conformances to manufacturing supervision or corrective action representative.
- Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
- Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
- Report on job status and restraints to coworkers and supervision.
- Identify production inefficiencies and suggests potential improvements to product or process.
- Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
- Identify nonconforming detail parts, assemblies and processes.
- Work with engineering to improve manufacturing processes.

ADDITIONAL EXPERIENCE:
- Experience with basic sheet metal, riveting, assembly methods and common shop practices.
- Experience interpreting and working from blueprints, sketches and written and verbal instructions, in English.
- Experience applying shop math.
- Capable of working any shift.
- Ability to work extended hours, overtime and weekends when necessary to support factory and operations activities.
- Experience using computer systems for shop applications.
- Experience with rigging and installation of operating mechanisms structures, or assemblies and parts, or related systems and equipment is required.
- Experience with aviation or military products and processes are a plus.

PREFERRED EXPERIENCE:
- Able to complete and maintain all required training and certifications needed to do your job efficiently.
- Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.

EDUCATION:
This job requires a minimum of a high school education and minimum of 2 years of work related experience or an equivalent combination of education and experience.

FULL TIME/1ST SHIFT
WORK HOURS: 5:00 AM - 2:30 PM

MISCELLANEOUS:
Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.

Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.

Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.



© 2018 Chipton‑Ross Inc. All rights reserved
 
Job Number: 176145
Job Location: Mesa, AZ
Rate: DOE
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Chris Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
RESPONSIBILITIES:
Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment. Uses technical data to diagnose and solve maintenance problems on aircraft systems. Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment. Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components. Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems. Supervises and performs aircraft jacking, lifting, and towing operations. Performs aircraft and component operational checks. Interprets inspection findings and determines adequacy of corrective actions. Inspects and checks components for clearances, tolerances, proper installation, and operation. Inspects and operates powered and nonpowered aerospace ground equipment. Inspects and identifies aircraft corrosion for prevention and repair. Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation. Inventories and maintains aircraft equipment.

EDUCATION:
Accredited High school diploma or GED and typically 4 or more years’ related experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 175955
Job Location: Eglin AFB, Fl
Rate: $30.00/hr
Per Diem: Possible
Overtime: yes
Duration: 12 months
Start Date: Now
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Stress Engineer

Description:
• Contributes to planning, developing and coordinating of important engineering projects
• Must have some MRB experience in support of a/c structural repairs.
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area Additional Functions

Unique Skills:
• Must have a minimum of 10 years experience in stress analysis on primary aircraft structure.
• Must have a minimum of 5 years experience in stress analysis on aircraft composite structure.
• Must have a minimum 5 years experience supporting MRB activities on aircraft composite structure.
• Working knowledge of CATIA V5 is a plus.
• This position is full time at a supplier in Tulsa, OK.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-310
Job Location: Tulsa, OK
Rate: $70 - $79
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Job Description:
Provides the Engineering leadership to a team representing the Cabin Systems In-flight Entertainment and Connectivity Engineering group, which may include internal and external resources and customers. Responds to changes to SOW, assesses the impact and negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies, and coordinates resources required over the life of the project or program. Defines plans for risk mitigation and opportunity. Focus on developing, implementing, integrating, and delivering customer introduction aircraft. Works closely with multiple cabin systems platform teams, cabin systems tech center, other systems teams as well as interiors teams. Supports configuration development, resolving cross-commodity design & interface issues, identifying & managing risks for the Customer Introductions and development projects, and serving as the Cabin Systems Integration Engineer to the program. Projects typically span numerous teams (within and beyond both Payloads and Systems) and require consideration of technical, business, and external factors. Works under minimal direction.

Education: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: PE2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - High Lift Systems

Description:
We are seeking an enthusiastic and experienced Project Engineer to work with the High Lift Systems for an exciting new aircraft project here in Rockford, IL.


Responsibilities:
•Support Supplier Integration Team activities as a project engineer of Mechanical System Design Group for High Lift Systems fora new regional jet aircraft program.

•Represent in a technical capacity and provide support for compliance test witnessing at partner/supplier sites and test Laboratory locations within U.S.

•Provide Qualification and Partner Liaison Coordination Support for Flight Control Systems (High Lift Systems) components.

•Develop and review Qualification Test Plans and Procedures jointly with Supplier for DO-160 and other tests, Review Qualification Test Reports, Similarity and Analysis reports.

•Witness tests as a ‘Test Director” and report on environmental, functional and performance qualification test completion and results in accordance with engineering and quality processes and standards.

•Provide support for test schedule development and tracking metrics and test coordination.

•Provide support for component qualification technical issue resolution and tracking.

•Prepare and issue agenda and status report of test activity.

•Provide support for generation of Test Witness Record (TWR) when Regulatory Agency representatives from JCAB, FAA, EASA or Certifying Staff are present.

•Provide support for Test Procedure deviation documentation as needed during test support.

•Provide support for component qualification document deliverables tracking.

•Support test failure case disposition/resolution and article tear down witness and reporting activities at supplier sites as required by technical teams.









Requirements
•Preferably 10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities.

•Must have experience with life cycle development, test and qualification and certification documentation (QP, QTP, QTR, QSAR) of Electro Mechanical and hydraulically powered Equipment such as:Â slat and flap actuation systems, power drive units, driveline components, position sensors, pumps and valves.

•Have flexibility to travel to partner or supplier locations to support program certification needs as required.

•Willingness to work long hours when requested by the Lead/Manager to support program needs.

•Must have a positive, pro-active attitude, and communicate effectively within a multidisciplinary work culture.

•Be willing to learn, appreciate, and blend into Japanese work and business culture.

•Must be able to travel as required to head office in Nagoya, Japan and Moses Lake Flight Test Center in Washington State as well as Supplier/Partner sites in U.S. to support test witnessing, component conformity inspections, workshops and technical interchange meetings.
 
Job Location: Rockford, IL
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Purchasing Coordinator

Description:
We are seeking an experienced aerospace Purchasing Coordinator to work on an exciting new aircraft project here in Moses Lake, WA. You will be part of a multicultural team working to bring aviation history to life. The Purchasing Coordinator's role and responsibilities include but are not limited to:

•Coordinate with Vendors, purchasing goods, receiving goods, accounting for said goods.

•Research and evaluate suppliers.

•Negotiate and renegotiate contracts with suppliers.

•Create and send purchasing orders.

•Monitor purchases through the delivery process.

•Evaluate supplier performance.



Requirements
•Strong knowledge of Microsoft Excel and Microsoft Word.

•Aerospace experience ​

•High attention to detail.

•Ability to make quick decisions.

•Organizational skills.

•Written and verbal communication skills.

•Customer service skills.

•Negotiation and conflict resolution skills.

•Ability to work independently.

•Needs to be able to work with Japanese expats.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Our client is looking for a Quality Assurance Engineer to work in Orlando, Florida! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
* Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
* Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
* Facilitate technical trade-offs and standardization that may lead to more economical procurement. Recommends design changes or process improvement to mitigate production issues.
* Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
* Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
* Works under only general direction.
* Independently determines and develops approach to solutions.
* Work is reviewed upon completion for adequacy in meeting objectives.
* Reports directly to the Lead Procurement Engineer and Procurement Engineering Manager.
* Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
* Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
* Compiles and analyzes statistical data to determine feasibility of buying products and to establish price objectives.
* Compiles information to keep informed on price trends and manufacturing processes.
* Confers with suppliers and analyzes suppliers' operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules.
* Reviews proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records.
* May prepare bid packages. Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.
* Works all market segment proposals with the Procurement Engineering Manager.
* The position is a tactical position driving strategy requiring the individual to execute with direct contact of product, suppliers, and customers.
* Analyze KPIs and data analytics to conduct supplier development efforts focusing on Master Production Scheduling, lean manufacturing, predictive risk, capacity planning/growth, inventory optimization, six sigma, and process maturity at supplier sites.

Mandatory Qualifications and Experience:
* Technical Engineering Degree or equivalent.
* Must have ability to obtain a security clearance.
* Relationship development with IPT, suppliers, and customers.
* A strong understanding of Geometric Dimensioning and Tolerancing (GD&T).
* Strong understanding of engineering requirements management.
* Experience with requirements management and flowdown to supplier.
* Must be able to identify and document supplier's quality deficiencies and ensure effective corrective action.
* Capable of performing root cause analysis and identifying solutions to complex problems. Understanding engineering drawings requirements mechanical and electrical inspection methods and design.
* A strong understanding of special processes and strong skill in managing and interfacing with suppliers daily to support the Program.
* Ability to focus on continual improvement practices using causal analysis tools to drive corrective and preventive actions
* Must have knowledge and understanding of critical design attributes and auditing/surveying capabilities.
* Intermediate to advanced Microsoft Excel skills.
* Knowledge of material cost estimating and subcontract estimates.
* Skilled with DCAA audit and fact-finding interface.
* Proficient with Cost Accounting Standards and FAR cost principles.

Desired Qualifications and Experience:
* SAP P2P and COS MRP; LM EPDM system; ASQ Certification or Lean Six Sigma Certification (Green Belt/Black Belt)
* Experience with working with suppliers and US Military customers in a dynamic environment
* Experience with performing First Article Inspections to AS9102 requirements
* Aircraft maintenance experience/knowledge and/or FAA A&P License and/or military Pilot/Loadmaster/Crew Chief experience
* Aircraft avionics and structure experience/knowledge
* Experience with source inspection and surveillance activities at suppliers to the SSOW
* Strong understanding in AS9100 and ISO 9001 Quality Management Systems
* Knowledge of Reduced Dimension Drawings and 3D Models
* Problem solving and time management skills at a highly refined level
* Skilled in supplier recovery and development activity with experience in Subtier Management, Cellular Manufacturing, 5S, equipment utilization rates, Kaizen events, Industrial Engineering, FIFO, Lean, Configuration Management, Change Control, Requirements Management and waste reduction

The ideal candidate for this position will possess the following skills and characteristics:
* Strong organizational skills and the ability to work in a dynamic environment.
* Must be able to multi-task, meet deadlines and to support all supplier quality field engineering activities.
* Strong communication skills (both oral and written) will be necessary to support the assignment and weekly reports.
* Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts Management Team and Customer Government Representatives
* High energy, self-starting, team player who achieves goals and delivers results.
* Presentation skills: PowerPoint, supporting documentation, verbal communication, facilitation, leadership.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129536
Job Location: Orlando, FL
Duration: 1 year
Start Date: 02/11/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Prefer Secret Clearance

SAP P2P and COS MRP; LM EPDM system; ASQ Certification or Lean Six Sigma Certification (Green Belt/Black Belt)

Experience with working with suppliers and US Military customers in a dynamic environment; Experience with performing First Article Inspections to AS9102 requirements; Aircraft maintenance experience/knowledge and/or FAA A&P License and/or military Pilot/Loadmaster/Crew Chief experience; Aircraft avionics and structure experience/knowledge;

Experience with source inspection and surveillance activities at suppliers to the SSOW; Strong understanding in AS9100 and ISO 9001 Quality Management Systems;

Knowledge of Reduced Dimension Drawings and 3D Models; Problem solving and time management skills at a highly refined level;

Skilled in supplier recovery and development activity with experience in Subtier Management, Cellular Manufacturing, 5S, equipment utilization rates, Kaizen events, Industrial Engineering, FIFO, Lean, Configuration Management, Change Control, Requirements Management and waste reduction
 
Job Number: 45813
Job Location: FL
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Specialist RMS Engineer





This position is responsible for leading comprehensive system reliability, maintainability and safety programs within the Industrial Sector Center of Excellence (COE). This position is also responsible for driving deployment of new tools and processes within the organization (e.g., Design for Reliability (DfR), Design for Safety (Client), or Design for Six Sigma (DFSS) deployment).



Develop a comprehensive system reliability and safety program plan, interfacing with Program Management to align key dates, resources, and milestones. Tracking and reporting progress to deliverables, and developing recommendations for program gate decisions.

Quantify system reliability and safety requirements based on customer wants/needs, and competitive benchmarking information. Allocate reliability and safety requirements to subsystem and component teams.

Have a general understanding of reliability estimation methods, such as Reliability Block Diagrams, Fault Trees, MIL-217, and others.



Lead complex reliability and safety analyses, either individually or through team efforts.

Understand basic aerospace safety standards (DO-178C and DO-254A), vehicle safety standards (ISO 26262), or industrial safety standards (IEC 62061 or ISO 15998).

Understand basic state of the practice methods for aircraft certification (ARP4754 and ARP 4761).

Guide the development of design Critical to Quality (CTQ) measures of program success based on customer wants/needs.

Leads a comprehensive risk management process including leading DFMEA, robustness models (P-diagram), and a program risk management log, promoting early identification and resolution of risk.

Define and execute system and component design validation plans and reports (DVP&R), including accelerated life testing and life test data analysis.

Managing a reliability growth plan, utilizing reliability analysis tools to calculate system and component reliability growth.

Lead a Failure Reporting, Analysis, and Corrective Action System (FRACAS) process, driving continuous improvement through a statistical problem solving approach

Present reliability program status to external customers.

Mentor other engineers in DFSS and reliability disciplines; provide formal training on selected topics in DFSS and Reliability.

Support CoE infrastructure projects for global alignment and reporting of reliability processes

Assure effective use of the proper product assurance tools and processes throughout Industrial Sector (Aerospace, Hydraulic and Vehicle Group) programs

Develop strong network and usage of global capabilities.



" Assigned to major repeater/stranger programs up to $100M total program budget; defines test plan in range of $2M for complex program.

" Strong influencer of designs in concept selection and risk / analysis.

" Reliability program plan defines work for peer reliability engineers and program teams.

" Report outs to Executive Leadership within company; negotiating of requirements with external customers and internal/external suppliers; presentations to senior leadership of external companies.

" Subject matter expert in several reliability and DFSS tools; mentorship of engineering peers in these disciplines.

" Sign-off authority for key program deliverables at major milestones; "gatekeeper role for new product programs.



" Bachelor Degree in Engineering,

" Minimum 10 years experience in technical role

" Minimum 4 years experience in new product development programs, including product launch phase

" Experience working with reliability/safety teams, product development teams, and internal and external customers



- Knowledge of transmission systems, aircraft systems, and/or hydraulic control systems

- Statistical tools knowledge (DoE, Weibull, Minitab)

- Preferably DFSS Greenbelt certification

- Knowledge of the DFMEA, Risk log, and 8D process

- Experience with reliability modeling, FMEAs/FMECAs, fault tree analyses, and analyzing large data sets

- Experience with warranty calculations

- Experience with ALT/HALT/HASS methods


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



 
Job Number: 18-51985
Job Location: Fort Worth, TX
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-28 00:00:00.0
Start Date: 2018-12-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jacob Muller
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability and Maintainability Engineer

Description:
We are seeking a highly organized individual with excellent communication skills to fill a Reliability and Maintainability Engineer role here in Moses Lake, WA in support of a new aircraft program. The Reliability and Maintainability Engineer responsibilities include but are not limited to:

•Collect, analyze and score Failure Reporting, Analysis Corrective Action System (FRACA) data.

•Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and develop Corrective Action Plans (CAP) for failed aircraft components.

•Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including fault detection and fault isolation.

•Estimate man-hours and elapsed hours for maintenance actions.

•Formulate reliability analyses and predictions including development of failure rate estimates.

•Assess maintainability analysis using digital mockup.

•Assist in developing troubleshooting procedures and guiding maintenance personnel in the performance of troubleshooting as a result of flight squawks during flight test.

•Evaluate flight test campaign events and prioritize them.

•Review the events and evaluate impacts for R&M which means impacts for airline fleet (Dispatch Reliability and Maintenance Cost etc.).

•Coordinate with reliability team troubleshooting members and maintenance team to perform root cause analysis and make feasible countermeasures.

•Conduct detailed investigations for priority issues and root cause analysis through coordination with related team members (Engineering, Maintenance and Flight Test Team etc.).

•Propose feasible countermeasures with engineering and promote their implementation.

•Prepare periodic reports on priority reliability and maintainability issue and the status of proposed countermeasures.






Requirements
•BS Degree in Engineering/Mathematics

•10+ years experience in field


Position also requires experience with or knowledge of the following:

•Failure Reporting, Analysis and Corrective Action Systems (FRACAS)

•Reliability Program Plans

•Reliability Predictions and Analysis

•Failure Modes, Effects and Criticality Analysis (FMECA)

•Maintainability Analysis and Prediction

•Application of probability and statistics to support decisions regarding sample size, burn-in life testing and failure analysis investigations

•Complete competency with Microsoft Word, Excel and PowerPoint

•Good written and oral communication skills

•Strong interpersonal skills especially across cultures

•Ability to work in a fast-paced, collaborative team environment

•Demonstrated ability as a team player to build consensus among peers and build effective relationships with team member.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR.ELECTRICAL ENGINEER

Description:
SENIOR ELECTRICAL ENGINEER  

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Electrical Engineer.



RESPONSIBILITIES:


  • Research, develop, design, model and certify analog/digital circuits for use in brushless motors.

  • Devise new approaches to problems encountered, assists technical personnel in execution of drawings, perform technical studies and evaluations. 


REQUIREMENTS: 


  • At a minimum a Bachelor's Degree in Electrical Engineering and analog/digital design experience 

  • 5+ related work experience

  • The ability to work well in a team environment, to trouble shoot, teach or learn about the designs. 

  • Exercise independent judgment to develop designs with minimal direction and concurrently support multiple projects. 

  • The ability to communicate with other engineers and customer representatives to resolve design discrepancies and develop products.

  • Aerospace Industry experience a plus.


  

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00245
Job Location: Seminole, OK
Rate: 120000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRAIN GAGE APPLICATION TECHNICIAN

Description:
JSG is seeking an Instrumentation Specialist Lead for a 15+ months contract opportunity in West Palm Beach, FL!

Description: Strain Gage application Technician:

The successful candidate shall meet the following requirements:- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 15 Years or more of experience.- Minimum of 10 years’ experience in the field of strain gage application to support test instrumentation -Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. Experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Experience troubleshooting and repairing strain gage measurements. - Familiarity with electronic tools such as multi-meters, oscilloscopes, logic analyzers, etc.- Solder/de-solder experience required.
Experience reading wiring diagrams and interpreting schematics and engineering drawing.
Manages building and maintenance of instrumentation systems for Flight Test programs to provide measurement data required by the Engineering Department. Apply instructions prepared by aircraft technicians in the form of travelers, Assist in the preparation, installation, check-out and operation of instrumentation systems, follow planned maintenance / calibration, and standard operating procedures for all instrumentation and control equipment in order to maintain accuracy of data and ensure its validity, and operate DAS (data acquisition system) and other recording equipment.
 
Job Number: 367131
Job Location: WEST PALM BEACH, FL
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Job Description:
Typical duties include backup of critical systems and data, restoration of accidentally deleted files, restoration of systems on a variety of hardware and software, administration of user accounts on servers running various operating systems, and maintenance and development of scripts in various languages and shells such as Apex Scripting language, bash, ksh and csh, and Windows batch files. Work with various technical support organizations to solve problems requiring outside assistance. Troubleshoot and configure networks, and switches. Install software and operating systems, configure, update and repair computers and servers as needed. Maintains and operates the Flight Engineering simulator which is made up of several computers and tablets running Windows 10 and two computers running SUSE linux.

The applicant should have a strong background in Unix and should have experience with the following hardware, operating systems and software.
Hardware: M5000 Oracle Sun server with 24 disk Fiber disk array, iHawk Simulation Servers with Real Time Clocks, Charon Virtual VAX hosted on Windows server 2008, Hardware Firewall, Large Uninterruptible Power Supply units, 400HZ Power supply for Aircraft simulations, 1553 bus and Ethernet networks, LTO-5 Tape Library
Operating Systems: Solaris 10 SPARC 64, Windows NT, XP, 7, 10, Windows server 2008, VMS 6.2, DOS 3.3, Redhat Linux 5.2.5, RedHawk RTOS 5.2, SUSE, WindRiver VxWorks
Software: Opentext Exceed, OpenText NFS Maestro, Git, GnatPro Ada, Microsoft Office, PowerTerm, Putty, ClearCase, ClearQuest, DOORs, Apex on Solaris (Ada development environment), Rsync, Acronis True Image, Beyond Compare, FlexLM license Manager on Unix and Windows, VLC, PASS3200 1553
 
Job Number: SE2018
Job Location: Fort Walton Beach, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
Work Location: Marietta, GA
Status: Open

Qty: 5
Desired Start Date: 2/4/2019
End Date: 4/27/2020

Job Description: Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. n a fast-paced, multi-disciplined research and development environment. Responsibilities include (1) real-time simulation software design and development and (2) software integration and test. Some requirements analysis, system verification and validation may also be required.
Comments for Suppliers: can accept candidates at level 2 or 4 as well. Can accept staggered start dates up to March 18
Rate Details
Rate Card Class: Software Engineer-SCI Clearance Required - Software Engineer-SCI Clearance Required
Region: Marietta, GA
Level: Level 3: BS+6-10 YRS or MS+4-8 YRS



Experience
Software Skills C++ - Advanced Level Yes 1
Software Skills MS Windows Yes 4
Software Skills UNIX Yes 3
Software Skills ADA No 7
Software Skills C No 9
Software Skills Java No 6
Software Skills Linux No 8
Technical Skills OO Programming Yes 2
Technical Skills OO Design No 5
 
Job Number: JE-1284-1S5
Job Location: Marietta, GA
Rate: open
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
Software Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 10
Desired Start Date: 1/21/2019
End Date: 3/27/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. n a fast-paced, multi-disciplined research and development environment. Responsibilities include (1) real-time simulation software design and development and (2) software integration and test. Some requirements analysis, system verification and validation may also be required.

Can accept candidates at level 2 and level 4 as well. Can also accept staggered start dates through February 2019

Region: Fort Worth, TX
Level: Level 3: BS+6-10 YRS or MS+4-8 YRS

Experience
Software Skills C++ - Advanced Level Yes 1 6 + Years
Software Skills Linux Yes 3 4 - 6 Years
Software Skills Modeling No 7 4 - 6 Years
Technical Skills OO Programming Yes 2 6 + Years
Technical Skills Simulation Yes 4 4 - 6 Years
Technical Skills OO Design No 6 4 - 6 Years
Technical Skills Real Time No 5 4 - 6 Years
 
Job Number: JE-1283-1S5
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.


Sr. Technical Writer writes technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. Perform other duties as assigned.

Sr Technical Writer has at least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications. Strong technical writing and communication skills are required. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired

Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years Technical Publications writing experience. Three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintainability Engineer

Description:
Job Title: Senior Maintainability Engineer

Duration: 6 to 12 Month Contract Position

Location: Chula Vista, CA

Work Status: United States Citizen or Permanent Resident / Green Card Holder


Education: B.S. Degree Preferred in Aerospace, Mechanical, Civil Engineering or Structural Engineering.


Job Summary:

Provide maintainability engineering services in support of nacelle component design and substantiation.

Qualifications:
Must be able to perform each essential function and have education, skills and experience listed below.

Key Words In Resume - Maintainability / Engineer / Analysis / CATIA / Aerospace OR Aircraft.

Essential Functions & Responsibilities –

Plan, analyze and execute maintainability concepts for aircraft nacelle components and assemblies.

Document maintainability plans, concepts, and analyses in formal reports, present in program reviews.

Effectively use CATIA v5 in support of analysis and documentation of maintainability efforts.

MINIMUM Education and Experience
•Minimum of ABET approved Bachelor degree in aerospace, mechanical, civil or structural engineering. Masters preferred
•Minimum of 5 years’ experience in maintainability of aircraft components
•Must be a US citizen or green card holder

Preferred Experience and Interpersonal Skills
•Experience in design or maintainability of nacelle components and mechanisms preferred
•Experience in design or maintainability of engine build-up preferred
•Strong interpersonal skills and a very high degree of collaboration at all levels required
•Demonstrated ability to multitask with strong task orientation and attention to critical details required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Be a collaborative, cooperative, creative, insightful, high energy self-directed and thoughtful considerate team player
•Ability to work independently, be insightful, resourceful and innovative and willing to do whatever work is assigned

Required Computer Skills
•Expertise with CATIA v5 – MIN 6000 hrs
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook

Certificates, Licenses, Registrations: None Required Except Diploma for BENG Degree or higher in Mech, Aero, Civil, or Structural.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55556
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Program Manager - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


We have several direct and contract Sr. Program Manager positions in the Seattle area working on aircraft actuation system components in an R&D and Manufacturing environment.

This position will involve responsibility to oversee and effect the on time delivery of several simultaneous aircraft related subsystems programs with support from the design, R&D and manufacturing departments.

This position will also require the development of new business or expanding the product line with the customer. Will also involve establishing milestones and monitor adherence to master plans and schedules,

will identify program problems and obtain solutions, such as allocation of resources or changing contractual specifications.

Leads the work of employees assigned to the program/project from technical, manufacturing and administrative areas.



Overview

The Senior Program Manager is responsible for managing assigned customer programs from proposal through production. In conjunction with Business Development, the Program Manager serves as a direct contact to the customer for program business matters and issues.

Responsibilities

Interface with Customer Contracting Personnel, Customer PM, Government Contracting Officer (CO), Government Task Leader (GTL), the contract level Contracting Officer’s Representative (COR), government management personnel and customer agency representatives.

Responsible for formulating and enforcing work orders (resource schedule, project statements)

Developing and maintaining program master schedules and milestones

Reviewing work discrepancies

Identifying/quantifying scope change issues

Coordinating RFQ responses

Generation of monthly cost, schedule, technical status reports

Supervising program personnel and communicating program goals to Team Members

Responsible for the overall contract performance including the profit and loss of the program(s) through the life of the contract(s)

Must have recent experience in project development from inception to deployment as well as expertise in the management and control of funds and resources



Qualifications

Bachelor’s degree in Engineering required

At least 5 years of direct program management experience in an highly regulated manufacturing environment, aerospace a plus

PMP or PGMP Certification is preferred

Must have demonstrated capability in managing multi-task contracts and/or subcontracts of various types and complexity and generation of monthly cost/schedule progress reports

Must have demonstrated capability in managing multiple projects in parallel

Strong business acumen coupled with mental aptitude and motivation to learn new functions and expand areas of expertise

Experience required with FARs, contractual requirements and contractual negotiations

Manage all major issues in primary practice areas with minimal supervision

Proven ability to track and report programs against schedule, budget and phase review objectives

Develop and implement recovery and action plans for off-track programs or unplanned events impacting programs

Demonstrate initiative and advanced interpersonal skills in team problem solving situations, relationship building and aligning with business goals

Excellent leadership, organization, communication and negotiation skills

Position requires frequent interaction with various levels of and Customer management

Proficiency with MS-Project program scheduling and resource allocation planning tools is essential

Familiarity with Government regulations including ITAR and Export Control

Ability and willingness to travel approximately 10%
 
Job Number: KeltiaPM1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Recruiter UT

Description:
Request number: 5687

Sr. Recruiter
Number of openings: 1

Position location: Salt Lake - UT
Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 45
Start Date: 11/12/2018
Tentative End Date: 04/12/2020

Do you:
• Get excited when you find talent for hard to fill positions?
• Enjoy working with a fun and collaborative team?
• Flourish in an environment of accountability and responsibility?
Then keep reading...

Company was founded in 1951 with one product and a vision of company culture so strong it became the foundation of the multi-billion dollar company we are today. We operate within a culture of trust and mutual respect, allowing our employees to collaborate and produce cutting edge technology, as well as aiding our business in the ability to share goals and achieve them together. Our lines of precision motion control technology can be seen at the forefront of military and commercial aircraft markets, space exploration, and oil and gas markets, to name a few.

Seeking a top notch Sr. Talent Acquisition Partner to manage full lifecycle recruiting efforts by sourcing, screening, selecting and on-boarding the highest quality and best fit candidates to support our tremendous business growth. At Moog, our Sr. Talent Acquisition Partners have creative approaches to identifying difficult-to-find candidates, demonstrated expertise in screening candidates and clearly articulate techniques for quickly mastering expectations of highly selective hiring managers.

You’ll need to be able to “check your ego at the door,” have an entrepreneurial mindset, as if you have ownership in the company, and possess a sense of humility. The ability to communicate clearly, build relationships and be an influencer are critical to your success. Additionally, our Sr. Talent Acquisition Partners work well under pressure and thrive on challenges.

Essential job functions:
Our recruitment process includes:
• Partner with hiring leaders to accurately define position requirements and develop an effective sourcing strategy
• Executing the sourcing strategy: researching, shortlisting, interviewing, and presenting candidates
• Proactively provide updates to hiring team and candidates
• Facilitating selection decisions
• Extending offers

Required skills:
What you need to bring:
• Several years of experience managing full life cycle recruiting - working directly with hiring managers and sourcing talent
• Experience working with Taleo or similar applicant tracking system
• Well-developed interpersonal skills that will help you build relationships, influence others and represent the Talent Acquisition team in various settings inside and outside the organization
• A background in Aviation / Aerospace recruitment is advantageous, but not essential

Experience that will position you for success:
• Having been a Corporate Recruiter, preferably in an Engineering environment
• Worked as an Account Manager at a staffing agency
• Experience sourcing talent at a staffing agency
• Experience in marketing
• Bachelor’s degree

Scope: Sr. Talent Acquisition Partner
Length of Assignment: Temp to hire
Location: Salt Lake, UT 84119
 
Job Number: MB-5687
Job Location: Salt Lake City, UT
Rate: 45/hr max
Per Diem: no
Duration: 5 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Location: Savannah, GA
Rate: $65.00 - $71.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Candidate will be performing structural analysis of Company interior monuments using FEA and classical hand analysis.
- Responsibilities will include both the analysis and certification documentation.
- Use of finite element analysis for both primary and secondary structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- A working knowledge of FAR part 25 certification requirements
- A good understanding of a fast paced completion-style environment
- Working knowledge of FEMAP is required

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9975
Job Location: Savannah, GA
Rate: $65.00 - $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique skills:
• Required Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis.
• Responsibilities will include both the analysis and certification documentation.
• The ideal candidate will have experience in the following:
• Use of finite element analysis for both primary and secondary structures
• Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
• A working knowledge of FAR part 25 certification requirements
• A good understanding of a fast paced completion-style environment
• Working knowledge of FEMAP is required

Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area


Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-356
Job Location: Savannah, GA
Rate: $68 to $75
Per Diem: Yes
Overtime: Yes
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Requirements:
- This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure.
- The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis.
- The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers.
- The candidate will be responsible for documenting work clearly and concisely.
- The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures.

Education:
- B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
- Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).
 
Job Number: 9732
Job Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Have Aircraft Interiors Experience know Nastran and Patran and
 
Job Number: 9
Job Location: Mid West
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 6+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer (FEMAP)

Description:
Ideal candidate will have experience in the following: Use of finite element analysis for both primary and secondary structures. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations. A working knowledge of FAR part 25 certification requirements. A good understanding of a fast phased completion style environment. Working knowledge of FEMAP is required.
 
Job Number: 19-826
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer -Interior Furnishings

Description:
Stress Engineer will be performing structural analysis of airplane interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following: -Use of finite element analysis for both primary and secondary structures -Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations -A working knowledge of FAR part 25 certification requirements -A good understanding of a fast-paced completion-style environment -Working knowledge of FEMAP is required




Stress Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned. Advanced degree in engineering related field preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers - Many Needed

Description:
Looking for Stress Engineers with Primary Structures or Sub-Systems.
*Degreed
*Hand Calcs a plus
*Unmanned Vehicle Experience a plus
*Aerospace/Aircraft Background
 
Job Number: BO-MO-Stress
Job Location: St. Louis, MO
Rate: $73.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12 Months+
Start Date: 01/18/2019
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Software Engineer(Level 4)

Description:
Seeking a software engineer to develop, integrate, test, and deliver software solutions as part of the organization's effort to upgrade its product portfolio to M-Code GPS technology. The engineer will work in all phases of the software development lifecycle to implement real-time embedded software.

Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards. Works under minimal direction.

Skills:
•ADA
•ClearCase
•DOORS
 
Job Number: RTSWE42019
Job Location: St Charles, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 8 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3

Description:
Structural Analysis Engineer 3

Location: North Charleston, SC
Duration: 6 months

Description:
Guides product material review board (MRB) liaison engineering in structural repair solutions and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools. Provide timely responses to manufacturing to support the achievement of required 787 takt time.

Skills & Qualifications:
- Experience with 787 Structures is highly desired.
- Experience working on Boeing aircraft.
- Experience with MRB stress support
- Knowledge of composite repair and analysis techniques.
- Knowledge of static, fatigue and damage tolerance analysis.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 63Y-Structural Analysis
 
Job Number: 19-00197
Job Location: North Charleston, SC
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 1/18/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3 / FEMAP / Nastran / no clearance CA

Description:
Structural Analysis Engineer 3 (Job Number: 18026724)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $54.00

Schedule: 9/80 A

Location: El Segundo, CA

Duration of assignment: Up to 1 year

Aerospace Systems located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 5 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 3 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1712
Job Location: El Segundo, CA
Rate: 54/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4 CA

Description:
163956
Structural Analysis Engineer 4 (Job Number: 18027073)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay Rate: $65 to $67/hr

Work Schedule: 9/80

Duration of Assignment: 1-31-20

Aerospace Systems client located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 9 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 7 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1707
Job Location: El Segundo, CA
Rate: 67/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 5 CA

Description:
163768
Structural Analysis Engineer 5 (Job Number: 18027074)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay Rate: $80 to $83/hr

Work Schedule: 9/80

Duration of Assignment:1-31-20

Northrop Grumman Aerospace Systems located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 14 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 12 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1706
Job Location: El Segundo, CA
Rate: 80-83/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
162964
1151-1 Engineering - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 7
Desired Start Date: 12/18/2018
End Date: 12/7/2019

Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.

The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures. Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).

Work Location: Palmdale, CA
Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $71.98 Hourly

Skills:
Software Skills Abaqus No 9 6 + Years
Software Skills Finite Element Analysis (FEA) No 9 6 + Years
Software Skills Nastran No 9 6 + Years
Technical Skills Stress Analysis Yes 9 6 + Years
 
Job Number: JE-1151-1S5
Job Location: Palmdale, CA
Rate: 71.98/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Duration: 10+ Months
Start Date: FEBRUARY 2019
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Stress Analysis Engineer III & IV - (WA)

Description:
Over 25 Positions in the Seattle/Everett, WA area.

Experience with aircraft structures, analytical skills, design/produce process, engineering analysis and/or design/test/certification regulations is essential. Work location will be in Puget Sound and will vary based on placement.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: StressWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Test Engineer

Description:
• Experience performing structural test of aircraft airframe and full scale aircraft test design concepts
• Experience working with Strain Gages, Load Cells, Pressure Sensors, Thermocouples, Extensometers and Displacement Transducers
• Experience with creation and implementation of conformity documentation for testing - RFC's, work orders, test deviations, and resolution of squawks
• Create and implement solutions for conducting testing including fixture design and fabrication, and lead a group of technicians and peers for accomplishing tasks

The Structures Company is an AA/EOE.
 
Job Number: 250
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural/Stress Engineer

Description:
Structural/Stress Engineer

Location: Chula Vista, CA
Pay Rate: $65/hr
Duration: 6 month contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
Requires an experienced engineer with Actuation systems stress background and who can work independently with minimum supervision. The candidate must be proficient using MSC PATRAN (a minimum of 5 years of experience), NASTRAN various solutions such as Soln 101, 106 and 111 and MS Office. A general understanding of propulsion systems load path, stress analysis and basic CATIA skills are also required. The candidate must have good communication skills and work well in a team environment. Primary responsibilities include but not limited to creation of Loads reports, Analysis Records and Certification reports needed to support Actuation deliveries. Structural (dynamic and static) stress calculations in Aerospace or engine propulsion environment is required. Review and approval of Qualification reports.

Additional/Requirements:
-Must have 5+ years experience in Aerospace Structural/Stress Engineering.
-Must have background in mechanical systems structures analysis (classical hand analysis and finite element skills).
-Nastran & Patran experience a big plus.
-Aircraft/airframe stress experience a must.
-Must have good communication skills and be team oriented.
-PC/Unix computing skills a plus.
-Bachelors degree a must.
 
Job Number: 10042
Job Location: Chula Vista, CA
Rate: 65
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Currently seeking a Structural Design Engineer (Wing or Fuselage) for a 12+ month contract. The ideal candidate will possess 5+ years of primary and secondary conceptual design experience with a focus in either wing, or fuselage design.

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cst and producability
• Working knowledge of composite executive aircraft construction including primary and secondary structure

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree - Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 5 years of primary and secondary Executive Aircraft structural design experience
• Experience with Catia V5
• Knowledge of Fibersim Is a plus


The Structures Company is an AA/EOE.
 
Job Number: 212
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Structures MRB Engineering experience at a recognized airframe manufacturer - Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage). - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Word, Excel) - Typically a 5-8hr day work week, with some scheduled weekend OT a possibility.


Structures MRB Engineer selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.



Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer

Description:
The Technical Designer does structural design engineering work for the interiors of business aircraft. Examples include custom cabinetry such as galleys, lavatories, closets and other storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, avionics system support including retrofit and new installations, and seating (floorplan) reconfigurations. • Assist Lead and Primary engineers in accomplishing project tasks. • Research data, and assist in defining scope by proposal review, team meetings, coordination with Operations, data research and airplane survey. • Provide liaison to Operations personnel. • Determine to use existing data and/or new data needed to be created. • Coordinate with Product Support Electrical and Certification engineering. • Coordinate data delivery priorities and dates with Operations to meet needs. • Provide input to Work scope Change Requests. • Monitor and respond to Engineering Service Requests. Preferred candidates will possess the following characteristics: • Customer-service oriented to our internal customers - primarily Operations personnel. • Flexibility, adaptability and quick learning skills to meet our customers' needs. • Ability to perform and prioritize multiple assigned projects at the same time. • Knowledge and experience with AutoCAD, Catia v5 and SmarTeam.

Education and Experience Requirements:
Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years related experience. Working knowledge of computer-aided design systems and personal computing systems. Working knowledge of engineering, engineering procedures and design drawing standards.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Test & Evaluation Engineer 3

Location: Seattle, WA
Duration: 6 Months

Description:
Support 3rd Shift testing in the 777X Integrated Test Vehicle laboratory. Responsibilities include, but are not limited to, communicating with the test team to configure, monitor and maintain the laboratory test setup (includes complex Hydraulics, Electronics and Mechanical Systems). Opportunity exists for expanded mechanical design work. This is a hands-on role that provides the opportunity to be part of a unique test team performing work class testing on advanced aircraft systems.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 63C-Mechanical Testing

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-20188
Job Location: Seattle, Everett, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-309
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9944
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Designer performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Principle Duties and Responsibilities:

Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 

Tool Designer actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Tool Designer must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding. Must be proficient with Catia V5

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Engineer ( Clearfield , Utah ) 8853608

Description:
Tooling Engineer ( Clearfield , Utah ) 8853608
12 Month Contract

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment, at the Clearfield, Utah location:

Responsibilities:
• Concept and design of special tooling within an Integrated Product Team structure
• Project management of vendor and CAD resources for design and fabrication of individual rocket motor and aircraft tools
• Use and/or manages Computer Aided Design (CAD) resources for tooling design
• Work with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proof tooling upon receipt
• Maintain tooling documentation related to design, fabrication and proofing
• Provide engineering disposition of damaged and discrepant tooling and oversee return to production
• Provides tooling estimates for new tools

Education and Experience Requirements:
• BS in Mechanical, Civil or Aerospace Engineering, or related field plus a minimum of internship experience.

Screening Criteria:
• Experience with design of mechanical and structural elements
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts preferred
• Experience with general metallic fabrication including welding, machining, and forming.
• Understanding of 3D CAD systems (CATIA V5, NX) preferred
 
Job Number: 8853608
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Weights & Mass Property Engr 3

Description:
Weights & Mass Property Engr 3

Location: Oklahoma City, OK
Duration: 8 Months

Job Description:
A mass properties engineer is needed to generate aircraft weight and balance reports performing the following duties:
Develops complex weight, balance and mass properties data. Determines approaches to developing data and analyzes and compares results. Defines complex weight, balance and mass properties related design requirements. Participates in developing customer specification commitments. Provides complex vehicle or system configuration guidance. Leads individual design team weight control efforts. Estimates, calculates and measures and verifies mass, weight, stiffness and inertias of components, assemblies and completed vehicles or systems. Develops and maintains weight, balance and mass properties accounting systems and generates weight and balance reports. Creates, develops and implements new processes and tools to facilitate improved design and analysis capabilities. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 651-Weights and Mass Properties

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-18644
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

Back to Advanced Job Search