Job Search Results

233 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/20 Tuesday 04:03AM Pacific Time by ContractJobHunter. )

Listings 1 - 233

Go To My Job Tracker

Expand all descriptions

- Assembler - Level 1

Description:
PDS Tech is seeking a candidate for the Assembler 1 position located in Northford, CT.  

Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary
Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.
 
Job Number: 1810080003
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/17/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eqwAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2393 - EEDA SPECIALIST - cv, word doc only

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.

Possess, as a minimum, a Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Possess a minimum of 8 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

You may also have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

You are also able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management.

Experience with certification authorities' liaison is an asset.
 
Job Number: 2393
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2416 - PROJ. MGMT - SUPPLIER FOCAL - EVENING OR WEEKEND SHIFT

Description:
Monitor supplier performance. Review key supplier performance indicators on a daily basis and participate in the development of an action plan with the vendor to address performance gaps.

Ensure that the vendor follows established planning, monitor progress and communicate progress to management, issues and escalation issues as appropriate.

Create seamless and efficient communication between suppliers and Client's internal functions.

Understand and communicate issues and priorities.

Facilitate discussions between operators and suppliers to arrive at a solution.

Engage Client's internal departments (in-service engineering, technical support, engineering, maintenance, logistics, programs and engineering) to help solve problems

University degree (technical or commercial) or equivalent, combined with a proven track record in the civil aviation industry.

Minimum of 11 years of experience in the aviation industry, preferably in a Program role.

Strong experience in Methods, Logistics or Operations.

Candidate must have previous experience in project management, preferably within an aerospace engineering environment.

Supplier Management is an asset.

Candidate must be autonomous and capable of taking decisions based on facts.

Must be proficient with MS Office applications including MS Project, Power Point and Excel.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.

Must have excellent troubleshooting and problem solving skills.

Knowledge of the client aerospace engineering system is an asset.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Must have extensive experience in project management activities and have good financial knowledge.

Must have knowledge on implementation of change management activities.

Have excellent communication, presentation and project management skills; you also have a lot of people skills.

Are focused on customer satisfaction
 
Job Number: 2416
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 11/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2453 - STRUCTURES PRODUCTION SUPPORT - cv, word doc only

Description:
Work within a team to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in resolution of issues.

Generate engineering documents (drawings, MBD, and NIEO, modsums) to support RFC and PCR authorities.

Be involved in and part of all aspects of Structures, Systems Installations and Integration dealing with Final Line by closely working with other engineering departments, internal and external customers, and Structural partners/Suppliers.

Apply Achieving Engineering Excellence and other methodologies to implement and improve business processes, enhance customer satisfaction and meet strategic goals.

Maintaining technical knowledge and awareness of developments related to airframe structures.

Bachelor's or Master's degree in Aeronautical or Mechanical Engineering from an accredited university with minimum of 10 years of experience in airframe primary and secondary structural design including systems installations.

Have detail understanding of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications. Electrical & Systems experience would be an asset.

Have detailed understanding of airframe configuration optimization, loads, stress analysis, manufacturing processes, tooling concepts and structural in-service requirements.

Have understanding of civil aircraft certification rules and experience in certification procedures would be an asset.

Have previous CATIA V5, Design, and support to production experience. MRB experience would be considered an asset.

Have excellent communication and interpersonal skills, leadership skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.
 
Job Number: 2453
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 09/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2460 - BUSINESS ANALYST - cv. word doc only

Description:
Produce, maintain and respect the project schedules;

Lead, coordinate and govern meeting for any Process & Tool (SAP) implementation, Adjustment or improvement with the respective project stakeholders;

Produce and maintain Project Management indicators;

Understand and document manufacturing function's business requirements and processes;

Identify and propose solutions meeting business requirement;

Participate in multifunction workshop sessions and activities following SAP implementation;

Identify and manage master data modification;

Perform SAP improvement testing with IT;

Ensure efficient communication and change management with impacted functions;

Identify and document training requirement, perform training with users and super users;

Provide support to SAP users;

Ensure user support, troubleshooting and RFCs tracking with IT teams

Have a Bachelor's degree in Industrial Engineering, Operation Management, Computer engineering or any equivalent relevant experience.

Must have a minimum of 5 years of relevant employment experience.

Have organization skills, rigor and autonomy.

Demonstrate strong leadership skills and love challenges.

Have a great sense of initiative.

Have a very good knowledge of MS Office (Excel, MS Project, Power Point, Visio).

Experience in aerospace or cabinet manufacturing industry is an asset.

Strong knowledge of SAP, a major asset.

Bilingual - (French and English) is required.
 
Job Number: 2460
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 11/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2464 - PROJ. MGMT. - MATERIAL CONTROL - cv, word doc only

Description:
Document processes and define function-specific requirements

Establish project timelines ensure their implementation

Carry out improvement projects of various magnitudes, relating to Material Control (warehousing, internal transport, Expeditor)

Act as change agent at all levels

Propose and implement improvement ideas

Participate, organize, and facilitate improvement workshops with various stakeholders

Bachelor degree in Industrial Engineering or Business Administration, Logistics or Operations Management, or equivalent training/experience.

A minimum of 5 years of relevant employment experience.

Teamwork skills are proven and you are recognized for your leadership.

Are motivated by continuous improvement and enjoy project management.

Are at ease in a unionized environment.

Are ready to travel as required.

Are bilingual (French, English) must have excellent communication skills, both written and verbal.

Must have experience in Project Management or Project Engineering, certification in Project Management is an asset.

Experience in logistics, warehousing and production start-up is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Knowledge of SAP and SAP-EWM is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.
 
Job Number: 2464
Job Location: Mirabel, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 10/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Cartersville, GA.  
Please reach out to Mindy Jones mjones@pdstech.com or call her at 480.212.0847

In this role, you will make utility metering equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080238
Job Location: Cartersville, GA
Duration: 4 months
Input Date: 05/22/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOCAAY&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Northford, CT.  
Please reach out to Betsy Murphy bmurphy@pdstech.com or call her at 203.415.9123

In this role, you will make fire protection controls and safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble electromechanical parts by using power drivers and/or manual tools.
  • Test Assembly Boards using automatic computer type testers.
  • Assemble metal boxes for the finished units using power drivers or manual tools.
  • Assemble carton boxes and inserts to pack the finished units.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Experience Desired:

  • Experience working in a manufacturing environment 

Schedules/Shifts Available:

  • Mulitple shifts may be available.  Please call for details.

 
Job Number: 1810080250
Job Location: Northford, CT
Duration: 9 months
Input Date: 01/10/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fQSAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer - Municipal EIT (284)

Description:
*This is a full time salaried position, located in Paterson, NJ.*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing roads, storm water management and runoff, buildings, city infrastructure, etc. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:
*3 years’ experience in municipal and Civil engineering including road, stormwater runoff/drainage, erosion control, sedimentation studies, culverts, small bridges or similar design and engineering projects.

*Must reside within 1hr of Paterson, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT or PE Certification



Pluses:

*Some knowledge of AutoCAD or Civil 3D
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience



Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 284
Job Location: Paterson, NJ
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Controls Engineer- Equipment and tooling
Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.
(Not mandatory but good too in any of the below):
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 06/05/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service Representative

Description:
Our Customer Service Representatives (Inside Sales) professionally represent the Company to our Customers with the knowledge and skills to provide them the product or service they need.



QUALIFICATIONS:

Good customer service and communication skills

Reliable, organized, detailed and focused

Industry and sales experienced

Moderate computer skills, including communicating internally and externally via email

Work experience in Microsoft Office; proficiency in Excel

Ability to multi-task and manage time well

Knowledge of supply chain systems

Knowledge of industrial products helpful

High School Diploma or GED



RESPONSIBILITIES:

Respond to customer inquiries, provide quotes and take customer orders

Order and source products

Negotiate sale and purchase prices

Proactively generate sales and promote Company products

Expedite backorders

Assist with pulling inventory and preparing shipments

Assist with customer returns

Interact with customers and suppliers to obtain and fill orders correctly

Troubleshoot customer concerns.



COMPETENCIES:

Microsoft Word, Microsoft Excel, Microsoft Outlook, Achievement Orientation; Persuasiveness; Initiative; Interpersonal Skills; Time Management; Planning and Organizing Skills; Judgment
 
Job Number: 18-32061
Job Location: San Diego, CA
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-08-03 00:00:00.0
Start Date: 2018-08-06 00:00:00.0
Input Date: 08/01/2018
Last Updated: 09/19/2018
Firm Name: NESCO RESOURCE
Attention: Ashley Welch
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Direct Material Buyer

Description:
Location: Chula Vista, CA
Rate: $40.30/HR
Duration: 1 year W2 contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****

Technical Skills:
****MUST HAVE: BUYING EXPERIENCE****
-Technical buying of medium to high complexity components or assemblies including design to build (supplier IP).
-RFQ/RFPs skills
-Negotiation skills
-Cost management/cost reduction
-Project management
-SAP or major ERP system experience
-Continuous improvement experience (lean, 6 Sigma or variant).

Competencies:
High drive and energy.
Motivated and self-starter.
Capable of handling high volume in a fast paced environment.
Excellent communication skills
Excellent people and teamwork skills
Business acumen
Formal or informal leadership skills
Intellectual capability, ability to learn quickly with good analytical skills and ability to solve complex problems
Highly adaptable

Education:
Minimum: Bachelors in Business Administration, Economics or Industrial Engineering with supply chain coursework
Preferred: Masters in Business

Experience:
- 4 to 7 years of procurement and supply chain management experience.

Other: Stable work history.
 
Job Number: 9542
Job Location: Chula Vista, CA
Rate: $40.30/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 09/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Director of Engineering

Description:
POSITION SUMMARY:
Responsible for Global Engineering of charging products and services. This spans the range of charging solutions, including on/off vehicle, high power, industrial and laboratory. The role will collaborate with the global product team to ideate advanced solutions for target geographies and be responsible for the Engineering execution of projects to support growth initiatives. A strong, direct mentor to Engineering colleagues, this individual will inspire and lead product developments to maintain global market leadership, meet financial goals and drive organizational growth strategies.

DUTIES AND RESPONSIBILITIES:
• Provide hands-on technical and organizational leadership and mentoring to the cross-function, distributed Engineering team
• Lead multi-disciplinary R&D team of Electrical, Mechanical, Software, Systems development teams and Product Validation, Certification and Configuration Management functions
• Plan and allocate appropriate engineering resources for projects and provide scheduling, man-power, asset allocation, budgets and estimates to complete programs by deadline
• Work closely with Product Management and Global Leadership to define product strategy and requirements
• Establish engineering department goals, objectives, performance metrics, and initiatives to support corporate objectives.
• Ensures an engaged, innovative, and inspiring working environment be maintained by motivating, challenging, and coaching for personal growth, entrepreneurship, and customer engagement.
• Identify and develop new and emerging technologies as well as internal/external competencies required to be best in class.
• Develop and support new product launch activities by following and continuously improving new product introduction process. Develop and maintain “should cost” metrics for new designs, and ensure market competitiveness by meeting or beating product cost goals.
• Defines and drives accountability, consistency, quality, standardization and compliance across product development to ensure regulatory compliance and operational efficiency.
• Establish and maintain internal design review and release processes, and guidelines for product development and engineering designs.
• Ownership of regulatory compliance, and compliance portfolio of charging products
• Responsible to introduce customer specific applications, new products and product changes according to agreed timeline and global guidelines.
• Lead, train and support the team, to achieve their goals and objectives.
• Perform regular reviews with team members according the companies guidelines.
• Review and improve standards, best practices and procedures on a regular basis.
• Ensure legal requirements for NA market are met for products and applications

MINIMUM QUALIFICATIONS
• 5+ years track record of leading cross-functional Engineering organizations, developing leading products in competitive markets. Product development and launch experience for vehicle OEMs strongly preferred
• Experience leading broad engineering teams, with highly varied responsibilities and priorities in evolving, highly competitive markets. Proven success hiring and developing effective engineering teams
• Track record of planning and structuring of distributed teams to support business objectives
• Demonstrated success leading new product introductions with products utilizing electronic products and custom mechanical components.
• Experience in development and integration of local and networked communication technologies (eg WiFi, Bluetooth, Zigbee, cellular) and cloud services.
• Experience in working with outsourced manufacturers desired
• Experience leading new product developments through regulatory agency process (eg UL, VDE, CQC)
• Demonstrated record leading products through vehicle OEM product acceptance process

EDUCATION
• Bachelor’s Degree in Engineering, Master’s preferred

REQUIRED TRAVEL
• 10-30%

In addition to Knowledge cited in Director of Engineering, demonstrated knowledge of:
• 6-sigma tools and practices
• Project estimating and planning, bases of estimate
• Scrum and sprint techniques for development
• Design tools, eg SolidWorks, Altium, C++, LINUX
• Manpower planning and resourcing
• ISO14001/9001, IATF/TS16949 processes
 
Job Location: Monrovia, CA
Rate: Open
Duration: Permanent
Start Date: ASAP
Input Date: 08/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

EHS Safety Engineer

Description:
Are you looking for an exciting career opportunity as an EHS Safety Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849
 

Description:  


Essential Functions
 
 • Performs analysis of energetic materials operations, related physical facilities, and safety, fire and health hazards they present.
• Interprets requirements of OSHA, NFPA, EPA, DOT, DTSC, BATF, ATFE, DoD etc. for management and employees.
• Establishes and implements environment, health, safety and industrial/occupational hygiene compliance programs, promoting state-of-the-art safe and healthful work practices for the protection of personnel, physical assets, and production operations.
• Examines operations to recognize and evaluate occupational exposure to chemical and physical agents.
• Recommends and coordinates engineering and administrative controls to reduce hazards/risk and limit occupational exposure.
• Interfaces with personnel regarding Process Safety Management (PSM) hazard evaluations and control methods.
• Perform other related duties as assigned. Essential Functions
• Provides technical guidance and regulatory consulting to manufacturing and related support personnel within the site.
• Reviews operation processes and equipment designs to assess potential safety and health hazards to minimize employee injury and property destruction. • Investigates safety (EHS) related events.
• Actively participates in the development, implementation and maintenance of internal EHS procedures.
• Conducts formal EHS audits of work areas for the purpose of discovering and correcting unsafe conditions or unsafe work practices.
• Performs compliance and/or liability audits of other Pacific Scientific facilities as part of Business level teams. Includes Job Hazard and PPE assessments and analysis.
• Administers a variety of programs to ensure compliance. These programs include ESD, Ladder Management, Cranes and Hoists, Chemical Storage, Lockout Tag Out, and similar programs.
• Acts as a visible champion for safety within the site by conducting regular safety observations, strengthening relationships with employees, and delivering the appropriate and timely Hazard Communications.
• Conducts Safety Training as required
 

Qualifications:  



  • Engineer degree required in Safety, Industrial or related field.
  • Experience Required: 0-3 years’ experience minimum as an environmental engineer, safety engineer or industrial/occupational hygienist.
  • Environmental experience a plus

This is a Direct Hire position with opportunity for growth! 


 
Qualifications:  
  • Engineer degree required in Safety, Industrial or related field.
  • Experience Required: 0-3 years’ experience minimum as an environmental engineer, safety engineer or industrial/occupational hygienist.
  • Strong oral and written communication skills
  • Environmental experience a plus

 
Job Number: 1810089184
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfQFAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/13/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Engineer

Description:
Description:
Analog and digital electronics, PCB, Verilog, FPGA Design Engineer. Designs, develops, tests, or supervises the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.

Mandatory:
Electronic Circuit Design Engineer. Significant experience with FPGA programming, Verilog/RTL, analog and digital design and simulation is required. Excellent communication skills. Requirements flow down preparing and presenting design reviews.

Desired:
Mixed signal circuit design. High speed (>2.5 Gb/sec) digital and RF circuit design. Test engineering experience - hands on with laboratory test equipment. Integrated circuit design. MATLAB, C++, and other programming. Proficient with electronic design and simulation tools.
 
Job Number: 09699
Job Location: Santa Barbara, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.

Hours:
3rd Shift
 
Job Number: 169255
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/16/2018
Last Updated: 11/19/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.
 
Job Number: 169253
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/06/2018
Last Updated: 11/19/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 2 FL

Description:
1666/162631
Engineer Manufacturing 2 (Job Number: 18015290)

Number of Openings: 1

Location(s):Florida-Melbourne

Target Start Date: Sep 24, 2018
Target End Date: Sep 20, 2019
Rate: $33-$38/hour

Shift: 1st Shift - 9/80

Clearance: No Clearance Required.

Position Summary

Responsibilities

•Maintains configuration of the aircraft to Engineering requirements
•Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
•Translates Engineering requirements into a product build package
•Collaborates with tool design on manufacturing requirements
•Controls the flow of parts
•Coordinates make vs. buy part decision
•Structures Manufacturing Bill of Material (MBOM)
•Defines sequence of operations and specifies procedures for product build
•Ensures manufacturing processes and procedures are in compliance with customer requirements
•Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
•Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
•Supports the build and test of product
•Clears constraints affecting production of aircraft
•Investigates and initiates corrective actions and improvements in product quality and efficiency
•Collaborates with tool design to ensure product build is repeatable
•Oversees the integration of aircraft assembly technologies and processes
•Provides technical solutions to a wide range of complex and difficult problems
•Experience integrating products from engineering design to manufacturing floor
•Provides detailed written instructions that help facilitate product fabrication

Basic Qualifications:

•Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering.
•2 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality


Preferred Qualifications:

•Experience reviewing and interpreting electrical wire diagrams
•Experience supporting aircraft hydraulic and/or fuel integration/maintenance
•Experience supporting enhancement processes that improve production shop floor efficiencies
•Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
•Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
•Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
•Experience supporting aircraft maintenance and/or flight test operations
 
Job Number: MB-1666
Job Location: Melbourne, FL
Rate: 33-38/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 07/30/2018
Last Updated: 09/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Tool - 3 Clearance

Description:
PDS TECH INC. is seeking Engineer Tool - 3 located in El Segundo,CA.


Summary:

Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
  • Must have production assembly tooling and design background with demonstrated knowledge of the processes and standards used in the aerospace industry
  • Must be capable of performing tool design development utilizing CATIA V5 or NX 8.5 or above
  • Ability to work within a Production Engineering team and assuming roles for tool planning and technical execution is highly desirable-must be flexible for work content and role. 
  • Applicant should be familiar with GD&T

 

 


Qualifications
 
  • Basic Qualifications:
  • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD
  • Preferred Qualifications:
  • Aircraft production assembly line tool design experience

 
Job Number: 1810085240
Job Location: El Segundo, CA
Duration: 7 months
Input Date: 07/17/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPaLAAU&URLSource=cjhunter

Engineer Tool - 4- Secret Clearance

Description:
PDS TECH INC.  is seeking Engineer Tool - 4 located in El Segundo,CA.

Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
  • Must have production assembly tooling and design background with demonstrated knowledge depth of the processes and standards used in the aerospace industry for this.
  • Must be capable of performing tool design development utilizing CATIA V5 or NX 8.5 or above
  • Ability to work within a Production Engineering team and assuming roles for tool planning and technical execution is highly desirable-must be flexible for work content and role.  Should be comfortable with creating briefing materials and presenting data in team settings for critical design reviews and other high visibility discussions.
  • Applicant should be familiar with all current GD&T and best practices for delivering and managing tool design data.

 
Basic Qualifications:
  • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.   Job related experience will be considered in lieu of educational certifications: a minimum of 8 years of experience as a level 4 tool design engineer for aircraft and aerospace structures is required.
  • Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).


Preferred Qualifications:



  • Stress Analysis competency
  • Aircraft production assembly line tool design experience for large, high complexity assembly processes, including handling and lifting fixture design experience.
  • Lofting/surfacing skills in the CAD systems noted

 
Job Number: 1810085237
Job Location: El Segundo, CA
Duration: 7 months
Input Date: 07/17/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPa6AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Maintenance Engineer – Level 3

Description:
Location: Vandenberg Air Force Base, CA
Rate: DOE
Duration: 1 year contract
Shift: Not Specified
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description / Responsibilities:
The Facility Maintenance Engineer will support the maintenance and restoration of launch facilities in support of the Atlas V Launch Operations at Vandenberg Air Force Base California as part of our clients Engineering and Infrastructure Team. The successful candidate will provide management of all SLC-3 / Atlas V and other support facility activities, consisting of periodic maintenance and repair of launch facility and support building architectural, electrical, civil, structural and mechanical systems, including supporting facility corrosion control activities. Activities are performed by both contractor and company represented employees.

Candidate will coordinate the procurement of facility services, equipment, and furniture and perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance. Candidate will perform investigation of anomalies encountered by maintenance personnel and be responsible for developing a corrective action plans and work documents for both company and contractor support. Will work with various government groups including Air Force and Base Civil Engineering personnel. Will specify and order various types of facility equipment.

The successful candidate shall prepare and obtain approval for Statements of Work with detailed contractor direction and manage contractor's activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs for maintenance and repairs that are performed by external contractors.

In addition, the candidate will gather information, perform field walk-downs, and create, schedule, and manage the performance of maintenance and/or corrective Work Orders performed by Company represented personnel. Support will also include schedule integration and coordination of maintenance activities around launch processing activities. Candidate shall have relevant facility maintenance with an emphasis on architectural facility/building systems restoration and corrosion control.


Qualifications/Education:
- Bachelor's degree from an accredited college in Engineering or related discipline, or equivalent, with 10 years of professional experience.
- Experience with facilities engineering and plant operations.
- Experience working independently and in a team environment, with both represented and contractor personnel.
- Must have excellent communication, writing, and oral skiffs and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
- Ability to solve practical problems.
- Able to analyze and interpret data to make sound judgments and recommendations.
- Ability to read and interpret mechanical and electrical drawings, logic diagrams, and technical manuals.
- Basic experience with AutoCAD, create/revise engineering drawings as required.
- Proficient knowledge in Microsoft Office Suite.
 
Job Number: 8970
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flammability Engineer

Description:

PDS Tech is seeking a Flammability Engineer for an open position in Mobile, AL

Position Summary: 



The Flammability Engineer will support Company cabin and cargo engineering team in the review and approval of interior engineering flammability data in support of major and minor changes to aircraft type design



Primary Responsibilities: 



  • Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
  • Generate certification plans and support the creation of compliance statements in support of major projects.
  • Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
  • Coordinate with suppliers during development phase of the equipment to ensure that compliance to Company requirements are satisfied. 
  • Define the certification requirements to support aircraft modification in accordance with customer's request.
  • Review and approve Airbus internal and vendor test plans and reports, including witnessing testing as required.
  • Ensure that the design can be certified and all the necessary data for test and certification is produced.
  • Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and Airbus engineering organizations.
  • Generate reports as required. Reviews and approves suppliers compliance reports.
  • Create and ensure that the engineering is robust and meets integrated project requirements. 
  • Perform other tasks as assigned


Experience / Skills / Training: 



  • Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 and 25 cabin interior and flammability requirements.
  • A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies.
  • Minimum of 10 years in aviation or 5 years in aircraft compliance experience, specifically cabin and/or passenger to freighter.
  • Ability to write reports and technical memorandums.
  • Strong liaison with other departments both internally and internationally.


Education / Special Qualifications: 



  • Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering preferred.

  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 5 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
  • Familiar with FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools


Education / Special Qualifications:
5 years of aircraft certification experience and 3 years flammability certification experience. 
Bachelor’s in Engineering and Part 23 or 25 certification process understanding.

 

 


Travel:



Up to 10% business travel.

 



Essential Functions:   



  • Vision: able to see and utilize computer screens; able to move through office and from point to point to find specific co-workers and in-house experts.
  • Hearing: able to hear in normal conversations and respond to warnings and signals.
  • Speaking:  able to participate in normal business conversations.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate standard office equipment and utilize electronic id to enter building
  • Carrying: able to carry up to 20 lbs./9kg. when transporting documents, printer paper and similar items.
  • Lifting:  able to lift up to 20lbs/9kg. on occasion.
  • Pushing / Pulling: able to push/pull office chairs and pieces of equipment
  • Sitting:  able to sit for extended periods of time in front of a computer terminal while writing bulletins or participating in meetings
  • Squatting / Kneeling:  able to occasionally able to squat/kneel to access items stored on low shelving
  • Standing: able to stand for long periods of time in meetings and discussions
  • Travel:  able to travel through office/work complex and occasionally within US for business meetings.
  • Walking (include routine walking such as to a shared printer to retrieve documents):  able to walk through office and production areas sometimes on uneven surfaces to reach meetings, visitors and direct others to meetings.

 
Job Number: 1810087122
Job Location: Mobile, AL
Duration: 6 months
Input Date: 07/19/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mWhoAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity

Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.

Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 365895
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Mechanical Engineer – Level 3

Description:
Location: Vandenberg AFB, CA
Rate: DOE
Duration: 1 year contract
Shift: Not Specified
Overtime: Exempt
Per Diem Split: Yes (if eligible)

Job Description:
- The candidate will provide engineering support to include design, operation and maintenance of ground (fixed and portable) ECS/HVAC systems used at all Company VAFB Launch Sites and support facilities.
- Primary assignment is mechanical engineering support of design modifications, launch processing operations and system maintenance for VAFB Atlas V SLC-3E, Delta II SLC-2, and Delta IV SLC-6.
- Additional duties will include mechanical design engineering support of launch site ECS/HVAC modifications and other major facility modifications and/or systems upgrades.

Tasks will include the following:
- Develop new and revise existing operational test procedures and maintenance documentation associated with the launch vehicle ECS and facility HVAC systems to meet customer requirements.
- Serve as engineer responsible for disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions.
- This will include management of facility projects to ensure effective and timely technical integration and implementation.

Education/Experience Required:
- Bachelor of Science from an accredited college in Mechanical Engineering or equivalent experience, with a minimum of 10 years of professional experience; or 5 years of professional experience with a related Masters degree.
- The successful candidate should have experience constructing, modifying and/or operating facility ECS/HVAC systems for space launch facilities and/or heavy industrial facilities.
- Experience with industrial process heating, refrigeration and air-conditioning systems and equipment is essential.
- This position requires competent knowledge of facility ECS/HVAC systems, mechanical engineering design, CAD practices as well as a sound practical (hands-on) knowledge of engineering principles, practices, and industry standards.
 
Job Number: 9253
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer 3

Location: Hazelwood, MO
Duration: 7-8 months

Job Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Category Name Required Level
Technical Skills Manufacturing Experience Yes Advanced
Technical Skills Manufacturing Process Yes Advanced
Technical Skills Measurement Standards Yes Intermediate
Technical Skills Plant Layout Yes Intermediate
Technical Skills Problem Solving on Manufacturability Problems Yes Advanced
Technical Skills Project Management Yes Advanced
Technical Skills Quantitative analysis Yes Advanced

Skill Code:
D26-Mfg Industrial Engrg
 
Job Number: 18-07732
Job Location: Hazelwood, MO
Per Diem: split
Overtime: possible
Duration: 7-8 months
Start Date: 8/17/18
Input Date: 08/07/2018
Last Updated: 08/16/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Industrial Engineer

Description:
General Summary:
The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:
  • Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  • Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  • Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  • Collects and analyzes data and metrics and presents the information to large audiences.
  • Provides productivity planning with accompanying future strategies for improvement.
  • Develops and maintains engineered time standards.
  • Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  • Develops and maintains plant standards.
  • Creates and maintains valve stream maps.
  • Plans, schedules, and prioritizes work to meet established deadlines.
  • Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  • Determines and improves processes to meet production levels.
  • Schedules and sequences job plans (with ME approval) to support effective work flow.
  • Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) required.
Experience in aerospace industry in aerospace manufacturing a plus.

Knowledge, Skills and Abilities:
  • Strong analytical and innovative skills.
  • Strong work ethic.
  • Ability to multitask.
  • Ability to work under minimal supervision.
  • Detail oriented.
  • Excellent problem solving skills.
  • Ability to read and interpret engineering drawing and/or specification requirements.
  • Excellent communication skills, both verbal and written.
  • Excellent presentation skills.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.   

 
Job Number: 1810082205
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 03/05/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dz7iAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Location: Savannah, GA
Rate: $39.67 - $44.08/HR
Duration: Long Term Contract
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Strong project management skills. A minimum of 2 years project management experience. Ability to think outside of the box.

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Ability to influence across functional disciplines. 3. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 4. Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc. 5. Lean Specialist certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.

Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct analysis with area Management and support staff to establish and maintain daily work activities. 2. Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures. 3. Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives. 4. Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks. 5. Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.). 6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests. 7. Support all Safety, Sustainability and Ergonomic initiatives as required. 8. Develop and Implement plant layout, process flow, and material handling techniques. 9. Support area Management in generating orders/requests for Tooling including management of tool priorities. 10. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions. 11. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.

Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.
 
Job Number: 8655
Job Location: Savannah, GA
Rate: $39.67 - $44.08/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Unique Skills:
• Strong project management skills. A minimum of 2 years project management experience. Ability to think outside of the box.

Education and Experience Requirements:
• Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience


Essential Functions:
• Conduct analysis with area Management and support staff to establish and maintain daily work activities.
• Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures.
• Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives.
• Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
• Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.). 6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
• Support all Safety, Sustainability and Ergonomic initiatives as required.
• Develop and Implement plant layout, process flow, and material handling techniques.
• Support area Management in generating orders/requests for Tooling including management of tool priorities.
• Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Develop and maintain work place methods and manpower requirements.
• Assist in the training and development of entry-level industrial engineering personnel.
• As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to influence across functional disciplines.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-239
Job Location: Savannah, GA
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II & III - (Everett, WA)

Description:
SEVERAL OPENINGS IN EVERETT, WA.

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: IEWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 08/15/2018
Last Updated: 09/21/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III

Description:
Position Summary: This role requires an understanding of manufacturing concepts, methods & procedures. Primary roles and responsibilities include: product flow and shop floor optimization, constraint management applications, crew plan development, labor hour forecasting, critical path analysis, capacity analysis, schedule development and mitigation planning, staffing analysis and process improvement initiatives. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

Work with Process Engineering to generate should costs for manufacturing processes of customer parts.
Create capacity models of department and machine.
Participate in cross functional problem solving team working with direct labor solving problems brought up from the floor.
Calculate labor estimates from historical manufacturing data and understanding of engineering drawings, bills of material, mechanical and soldering assembly processes, equipment and tooling, and Lean Six Sigma.
Carry out cycle time reviews (direct labor productivity) and validation, to participate in process improvement projects that improve product cost, delivery and cash.
Will be expected to work with and communicate to the direct business unit as well as to cross functional teams (engineering, quality, materials, contracts and manufacturing) to support cycle time reductions and on-time delivery improvements.
Optimize manufacturing process incorporating Environmental Health and Safety / Ergo improvements.
Complete projects to increase process efficiency and reduce manufacturing cycle times.
Perform other duties as required.

Qualifications & Skills Requirements:

Bachelor's degree in Industrial, mechanical, or related field.
Minimum of 10 years of experience in Manufacturing and / or Industrial Engineering or equivalent.
Strong analytical skills (specifically Excel, Minitab or other statistical analysis software).
Strong oral and written communication skills.
Enterprise Resource Planning system awareness, specifically Visual is also desired, but not required.
Strong interpersonal and leadership skills.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to lift and/or move up to 10 pounds. Will need to be able to move throughout the office or production facility and communicate with other employees and management. Work will be performed in an office and production facility environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III & IV - (MO)

Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: IEmo
Job Location: Saint Louis, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/05/2018
Last Updated: 08/10/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Location: Fort Worth, TX
Rate: $61.65/HR
Duration: 5 month contract (possibility of going longer)
Shift: 9/80-A
Per Diem Split: Yes (if eligible)
Overtime: Possible
Travel: Possible

****MUST be a U.S. Citizen****

Job Description:
- Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.
- Experience with Lean Manufacturing, Supply Chain, Project Management, Risk Management, Supplier Quality, Meeting Facilitation, Manufacturing Process, and Quality Management System (QMS).
- Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems.
- On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.
- May assist facilities engineers in the planning and design of facilities.
- Visit supplier sites to verify manufacturing process to analyze supplier capabilities.

Education:
- Bachelor's Degree with 16 years of experience or Masters Degree with 14 years of experience.
- Experience with Lean Manufacturing, Supply Chain, Project Management, Risk Management, Supplier Quality, Meeting Facilitation, Manufacturing Process, and Quality Management System (QMS).
 
Job Number: 9522
Job Location: Fort Worth, TX
Rate: $61.65/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) - Secret Clearance

Description:
Information Systems Security Officer – Level 3 - Secret Clearance

Location: Sunnyvale, CA
Pay Rate: DOE
Duration: 3-4 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Skills Required
• Knowledgeable of information technology security technical principles, Information Assurance methodologies and concepts
• IS auditing experience
• Working knowledge of Security Technical Implementation Guides (STIG)
• Knowledgeable of Operating System security requirements
• Understanding of configuration management principles
• Must be a team player, self-motivated, and a quick learner
• Hands on experience with IA tools
• SIPRNet management experience
•Bachelor's degree and 9-15 years' experience or Master's degree and 7-13 years experience

Description:
'LMS Information Systems Cyber Security team is looking for an assertive and self-confident Information Systems Security Officer (ISSO) to partner with the program and government customers to perform the duties as a Secret Internet Protocol Router Network (SIPRNet) ISSO located at the LM-SPACE Sunnyvale, CA campus. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

The ISSO will oversee day-to-day information system (IS) security operations including hardware and software implementations. The ISSO carries out technical administration of IS and gives direction to the system administrators in accordance with internal LM and customer security requirements, primarily using National Industrial Security Program Operating Manual (NISPOM) guidance as it pertains to SIPRNET and additional customer direction. Ability to work independently as well as in a teaming environment. Adaptable to diverse office situations, procedures and demands.
Job duties include:
- Develop, maintain, and update security documentation to include SSP, SCTM, Continuous Monitoring, POAMs, RAR, SAR, etc.
- Auditing of the IS, system administrators and program engineers
- Constant upkeep, monitoring, analysis, and response to network and security events.
- Documents compliance actions within the approved automated compliance tracking system or develops a plan of actions and milestones (POAM) maintained, and disposed of in accordance with internal security policies and practices outlined in the security plan.
- Ensures configuration management (CM) for security-relevant IS software, hardware, and firmware is maintained and documented in accordance with baseline.
- Ensures all information system security-related documentation is current and accessible to properly authorized individuals.
- Ensures records are maintained for workstations, software, servers, routers, firewalls, network switches, telephony equipment, etc. throughout the information system's life cycle.
- Evaluates proposed changes or additions to the information system, and advises the ISSM of their security relevance.
- Assist and conduct security IS education.
- Participates in internal/external security audits/inspections; performs risk assessments
- Leads investigations of computer security violations and incidents, reporting as necessary to ISSM
- Ensure proper protection and / or corrective measures have been taken when an incident or vulnerability has been discovered
- Develop, implement and enforce Information Security Policies and Procedures together with ISSM/FSO
- Develop and oversee Information Systems Security Plans / SSP (Certification/Accreditation) together with ISSM
 
Job Number: 8963
Job Location: Sunnyvale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3+ mos
Start Date: ASAP
Input Date: 04/19/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inside Sales Representative

Description:
Our Customer Service Representatives (Inside Sales) professionally represent the Company to our Customers with the knowledge and skills to provide them the product or service they need.



QUALIFICATIONS

Good customer service and communication skills

Reliable, organized, detailed and focused

Industry and sales experienced

Moderate computer skills, including communicating internally and externally via email

Work experience in Microsoft Office; proficiency in Excel

Ability to multi-task and manage time well

Knowledge of supply chain systems

Knowledge of industrial products helpful

High School Diploma or GED



RESPONSIBILITIES

Respond to customer inquiries, provide quotes and take customer orders Order and source products

Negotiate sale and purchase prices

Proactively generate sales and promote Company products

Expedite backorders

Assist with pulling inventory and preparing shipments

Assist with customer returns

Interact with customers and suppliers to obtain and fill orders correctly Troubleshoot customer concerns.



COMPETENCIES

Microsoft Word, Microsoft Excel, Microsoft Outlook, Achievement Orientation; Persuasiveness; Initiative; Interpersonal Skills; Time Management; Planning and Organizing Skills; Judgment

 
Job Number: 18-32579
Job Location: Pittsburgh, PA
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-01-31 00:00:00.0
Start Date: 2018-08-13 00:00:00.0
Input Date: 08/06/2018
Last Updated: 08/13/2018
Firm Name: NESCO RESOURCE
Attention: Ashley Welch
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intelligent Manufacturing Expert - Aerospace - China - Fixed Term Contract - Shanghai.

Description:
A leading aerospace company in China working in advanced manufacturing, are seeking an Intelligent Manufacturing Expert.

Under the leadership of the relevant department, you will carry out intelligent manufacturing work in an all-round way. According to the company's development requirements and the actual production of the workshop, be responsible for intelligent manufacturing planning, intelligent production line design, intelligent production line production and maintenance, and provides all aspects of technical support for the workshop's intelligent manufacturing transformation and upgrading.

Candidate Responsibilities:

Responsible for production line planning, development, testing, commissioning, maintenance, etc., giving technical guidance;

Analyse the development trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

Responsible for implementing workshop intelligent manufacturing upgrade, manage the production line equipment on the entire life cycle.

Follow up the progress of the project in time, lead the team to solve problems related to on-site production lines, and ensure that the project is completed on time;

Responsible for intelligent production line information management and programming.

Complete other tasks assigned by the leader.

Experience requirements:

More than 10 years working experience, including more than five years of experience in intelligent manufacturing and automation equipment development;

Familiar with the process of R&D, production, and management of aviation products;

Familiar with software, hardware technology and enterprise information management software of enterprise intelligent manufacturing related equipment;

Skilled apply intelligent manufacturing equipment control system programming;

Professional Knowledge:

Familiar with the whole process of planning, design, use and maintenance of intelligent production lines.

Have automation and informationization expertise.

Familiar with the entire production and process of civil aircraft industries product.

Have knowledge of modern enterprise management.

Skills Required:

With strong strategic thinking ability, it can always focus on the project requirements and scientifically plan the tasks and tasks of intelligent manufacturing work from the overall perspective and long-term perspective.

Strong ability in coordinating leadership, capable of serving enterprise decision-making, leading the team to promote the design, construction and operation of intelligent production lines.

Solid professional capabilities in automation and informationization, proficient in intelligent manufacturing full-process business, experienced to handle complex and difficult work, familiar with business and project management, with strong professional capabilities and organizational coordination,

Proficient in English speaking, reading and writing.

Candidates who can demonstrate the above skills and experience within the Aerospace Industry will be highly considered. This is an opportunity to work on a long term contract assignment basis in China on the latest / advanced manufacturing /Aerospace Manufacturing 4.0.

Please quote ref JO0000000129 on application.
 
Job Number: JO00000000129
Job Location: China
Duration: 2 -4 years
Start Date: August 2018
Input Date: 08/02/2018
Last Updated: 09/28/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Civil Engineer - PERMANENT

Description:
Responsibilities:
• Will function as Civil Discipline Engineer of Record on small to medium projects, assuming responsibility for the work of the group.
• Leads other Engineers and design personnel in technical excellence and growth in the Quality Improvement Process.
• Provides technical consultations for interdisciplinary analytical studies and analyses.
• Ensures compliance of design with all applicable codes and regulations, providing the seal and signature of the professional engineer when required by statute or contract.
• Prepares material/equipment specifications and purchase requisitions; reviews supplier data; witnesses shop tests, assists with assessing supplier manufacturing capabilities.
• Conducts surveys, studies, and site investigations.
• Maintains affiliation with professional societies to keep abreast of current technologies.
• Helps determine budget estimates and staffing requirements for the defined scope and schedule. May assist with other administrative and technical duties.
• Recommends and prepares technical papers.
• Performs other responsibilities associated with this position as may be appropriate.
 
Job Number: Pars1
Job Location: Bakersfiled, CA
Start Date: ASAP
Input Date: 07/31/2018
Firm Name: NESC STAFFING
Attention: Julianna Raffa
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB Engineer / Product Review Engineer III - (AL)

Description:
• Develops dispositions for previously fielded, unserviceable items utilizing Interactive Electronica Technical Manuals (IETM), Depot Maintenance Work Repairs (DMWRs), engineering drawings and/or process specifications.
• Applies broad knowledge of Boeing design and/or engineering principles.
• Develops and implements product/process improvements.
• Communicates engineering serviceability issues with Integrated Product Teams (IPT) and participating in design reviews.
• Uses innovative approaches and unique applications to address complex unserviceable conditions and to detect deviations.
• Utilizes basic static strength analysis to design interim and/or structural repairs.
• Analyzes reported problems for potential safety issues; recommends and manages complex resolution.
• Leads development of interim and final dispositions.
• Represents the engineering community in the build through post production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Supports supplier activities for on-site disabled product repair teams.
• Ensures supplier and build partner compliance with Boeing standards.


This position requires direct engineering support at an off-site supplier for the depopulation efforts which remove previously fielded (used) major assemblies, sub-assemblies, and detail components from the Apache rotorcraft. They are inspected and dispositioned with the intent of repairing/restoring to a serviceable condition; these items are then modified by the primary integrator (Boeing-Mesa), then re-installed on the aircraft. The components vary in terms of the state of serviceability, and component type; they consist of both primary and secondary, metallic and composite bonded structures, pneumatic and hydraulic systems, flight safety related components, and armament sub-systems.

Preferred Qualifications:
• Previous Material Review Board (MRB) experience preferred.
• Universal Product Review (UPR) preferred
• Previous experience with Depot Maintenance Work Requirement (DMWR) and/or Interactive Electronic Technical Manual (IETM) highly desired.
• Ability to learn in a fast-paced environment.
• Ability to collaborate with other engineers (both face-to-face, and via remote correspondence) and factory-floor mechanics.
• Develop and implement product/process improvements.
• Develop customer correspondence for continued safe operation and maintenance of equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification, or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Bachelor, Master or Doctorate of Science degree from an accredited course of study in Mechanical, Aerospace / Aeronautical, Civil, or Electrical engineering. ABET is preferred.
 
Job Number: MRBal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10-12+ Months
Start Date: ASAP
Input Date: 07/17/2018
Last Updated: 08/10/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Maintenance Mechanic - Level 1 - FL

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
Competently uses computers and other systems to access, maintain and manipulate data.
Interpersonal skills and the ability to interface with all levels, to work in teams or independently and communicate effectively with all co-workers or supervisory staff.
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair (NOT PARTS) and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

SHIFT
1st Shift: 6:30am to 5:00pm
4/10 work schedule
 
Job Number: 166611
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 03/11/2018
Last Updated: 11/19/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Manufacturing Engineer 4

Description:
PDS Tech, Inc. is seeking a Manufacturing Engineer 4 in Melbourne, FL.
 

Position Summary



We are looking for a Manufacturing Engineer 4 to join our team of qualified, diverse individuals. This position will be located in Melbourne, FL, where technology and teamwork come together. The selected candidate will become part of the Manufacturing Engineering Team at the Melbourne Design Center of Excellence working in a collaborative environment while promoting a positive, proactive and team Environment.



 



Responsibilities



  • Maintains configuration of the aircraft to Engineering requirements
  • Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
  • Translates Engineering requirements into a product build package
  • Collaborates with tool design on manufacturing requirements
  • Controls the flow of parts
  • Coordinates make vs. buy part decision
  • Structures Manufacturing Bill of Material (MBOM)
  • Defines sequence of operations and specifies procedures for product build
  • Ensures manufacturing processes and procedures are in compliance with customer requirements
  • Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
  • Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
  • Supports the build and test of product
  • Clears constraints affecting production of aircraft
  • Investigates and initiates corrective actions and improvements in product quality and efficiency
  • Collaborates with tool design to ensure product build is repeatable
  • Oversees the integration of aircraft assembly technologies and processes
  • Provides technical solutions to a wide range of complex and difficult problems
  • Experience integrating products from engineering design to manufacturing floor
  • Provides detailed written instructions that help facilitate product fabrication
  •  Independently determines and develops approach to solutions

Basic Qualifications:



  • 9 Years of Manufacturing Engineering experience with a Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university; 7 years of engineering experience with Master’s Degree in STEM and 4 years of Engineering experience with PHD .
  • 9 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality.


 



Preferred Qualifications:



  • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering.
  • Experience reviewing and interpreting electrical wire diagrams
  • Experience supporting aircraft hydraulic and/or fuel integration/maintenance
  • Experience supporting enhancement processes that improve production shop floor efficiencies
  • Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
  • Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
  • Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
  • Experience supporting aircraft maintenance and/or flight test operations

 
 
Job Number: 1810088999
Job Location: Melbourne, FL
Duration: 1 months
Input Date: 07/24/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002meFVAAY&URLSource=cjhunter

Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/15/2018
Last Updated: 11/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Job Description

Work Type Level 2 Mechanical Engineering (Regular Temp)

Title Mechanical Engineer I

Job Description

1) Develop mechanical prototypes using CAD and rapid prototyping methods 2) Design test fixtures for verification, characterization, calibration, and reliability testing for devices with electronic, fluidic, and mechanical functionalities 3) Define test plans in collaboration with the lead engineers 4) Troubleshooting of devices during early stages of design and development 5) Analyze test failures and work with design engineers to identify the root cause of failure 6) Perform mechanical testing of components and materials, data analysis Candidate must be well-versed in 3D CAD, prototyping methods, mechanical testing, and basic data analysis. Awesome analytical and organizational skills, coupled with a well-focused attention to details; ability and commitment to produce a timely and highly accurate work.

Skill/Experience/Education

Mandatory Bachelor's or higher degree in engineering discipline (mechanical, materials, biomedical).
Demonstrated experience in industrial R&D environment - 3D CAD (Solidworks)

Desired Experience in mechanical testing, basic experience with JMP/Matlab, basic data analysis and statistics
 
Job Number: 391199
Job Location: Seattle, WA
Input Date: 08/08/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanism Design Engineer - Catia v5

Description:
Seeking an experienced Mechanisms Design Engineer focused on design, performance, manufacturing coordination, and installation integration of mechanism designs. The initial opportunity is related to interior seats, but there are many other opportunities to follow.

Responsibilities:

• Capable of creating design requirements, validating them, and decomposing them into an integrated verification plan for compliance/certification.
• Contribute to conceptual and preliminary design trades of varying complexity and document results of work
• Develop parametric CATIA V5 models that can be used to refine final mechanical designs
• Capable of interpreting engineering schematics to drive detail designs
• Works closely with prototype shop as well as production shop personnel to optimize design concepts
• Able to work closely with Industrial Design Engineers to integrate aesthetic and creative design requirements into design
• Supports the review of production planning and procedures to ensure compliance with design requirements
• Contributes to the creation of test plans in order to verify design intent, requirements and functionality
• Working knowledge of industry best practices; including design specifications (commercial and DOD), regulatory guidance (FAA AC), and aerospace recommended practices
• Expected to present work and technical findings to management and senior leadership through design reviews and program milestones where appropriate

Qualifications:

• BS in Mechanical/Aerospace Engineering or relevant engineering discipline
• 6+ years of experience in preliminary design, performance and/or integration of mechanical installations
• Experience with CATIA V5 and the CATIA kinematics tools
• Experience with Product Lifecycle Management tools
• Willingness to adapt and cross-train
• Strong team player with quality organization and pragmatic problem solving skills
• Expected to work independently as well with supervision given general guidance
• Experience with flight vehicles or vehicle systems certification to commercial standards (14 CFR Part 23 or 25) and/or military/government standards (DOD or NASA) is preferred

The Structures Company is an AA/EOE.
 
Job Number: 202
Job Location: Mojave, CA
Rate: $65-70/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/07/2018
Last Updated: 09/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
OPERATIONS PROJECT MANAGEMENT

Description:
JSG is seeking a Operations Project Manager for a DIRECT HIRE Opportunity for our client in Los Angeles, CA!

Position Summary:
Systems Project Manager will act as project leader for multiple project teams. As project leader, the Systems Project Manager will coordinate activities of the project design team and production personnel, and also be the point of contact for communication with the customer.


Duties

Project management role from purchase order to shipment. Project management includes: setting and meeting project parameters such as cost, schedule, performance, and deliverables.
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Project schedule development using critical path method covering all tasks from PO to shipment including those for which others are responsible for performing.
Post-booking activities include: detailed design and documentation for custom portions of specific projects, re-using existing hardware and software subassemblies as much as possible to minimize engineering content of complete delivered system.
Prepare, schedule and conduct design reviews with customer, engineering and operations.
Implement change orders to accommodate change of project scope.
Weekly customer communication to report on progress, schedule status, and when necessary delays and schedule recovery plans.
Coordinate acceptance test requirements, sample materials, laser application, machine readiness, customer visit schedule, and lab resources for acceptance tests. Manage acceptance test and handle all exceptions necessary to secure customer sign-off.

Requirements:
5 years of experience managing technical projects in factory automation, laser processing or related industry.
Current Project Management Professional (PMP) certification.
Four-year degree in Mechanical, Electrical, Software or related Engineering curriculum.
5 years of experience managing technical projects.
Demonstrated experience in successfully driving and delivering projects (on time, on budget and to customer satisfaction).
Communicate well orally and in writing with customers and others with whom he/she works with within and outside the Engineering department.
Experience with project management tools including MS Project, Visio, Excel, Word.
Ability to travel occasionally. (2 weeks per quarter)
 
Job Number: 367432
Job Location: LOS ANGELES, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 07/31/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Quality Engineer

Description:
We are looking for candidates who have experience with device evaluations in medical or pharma industry. Analyze customer complaints, events and other post marketing surveillance data by examining the data for patterns and trends and investigating when necessary; Investigate customer complaints related to product quality or patient safety;
Provide input for process improvement and helps develops tactical approaches to implement team strategies; Develop test plans, procedures, justifications papers and provide engineering support for new product complaint readiness; Experience in Medical Device industry, may consider other regulated industries (example pharma)
Experience in the analysis of products used in the field and writing technical evaluations
Understanding of Risk Assessment/Management methods
Understanding of MDR and EU Reporting .
Strong technical writing skills Bachelor%u2019s Degree preferably in Engineering (Biomed, Mechanical, Industrial), may consider other science disciplines.
 
Job Number: 11284
Job Location: Santa Clara, CA
Rate: Open
Per Diem: Y
Overtime: Y
Duration: 9 mos
Start Date: ASAP
Input Date: 07/06/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Shane Brandon
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager, Civil Engineer PE (76)

Description:
*This is a permanent position, located in Paterson, NJ*



We are hiring for a permanent lead Civil Engineer/Project Manager for our satellite water/wastewater engineering office who will be interfacing with municipal and country utility authorities, county and city infrastructure leaders, representing and working with our internal local and main office teams in conducting wastewater/municipal civil engineering design projects. The satellite office is a small, with less than 10 people, that owes its success to a strong sense of teamwork, professionalism, and ability to bring in complex projects on time and under budget.



The position will be very customer focused, whereby incumbent will be attending public meetings, being the representative of the county/municipality in discussing the merits and details of the project with stakeholders and public. The projects you would be working on are medium sized, 2 million to 50 million gallons processed a day, located throughout NJ, but especially in North NJ.



Work will include runoff, culvert, building, street, sewer as well as potable water projects. Typical construction costs of these projects would be up to 20 million dollar projects.



Required:
*5 years’ experience in water/wastewater systems design, project management and being the team member interfacing with customers and external stakeholders.
*Experience in water/wastewater in county and municipal work, preferably within NJ; knowledge of NJ regulations.
*Candidate must live/locate within short drive to Mt. Holly NJ.
*Some knowledge of AutoCAD.
*Civil or environmental engineering degree
*State of NJ Professional Engineer (PE) License and/or be ready to apply for a NJ PE upon hire (a 4-6 week process for completion).
*Relocation assistance available for the right candidate.
*Salary plus bonus plan, commensurate with market and experience.



Benefits:
• Healthcare plan with a Health Saving Account (H.S.A)
• Dental – 2 plans to choose from
• 401(k)
• Profit Sharing/bonus plan
• Paid Holiday, Vacation & Sick time
• Life Insurance; Supplemental Life Insurance
• Short & Long Term Disability
 
Job Number: 76
Job Location: Paterson, NJ
Input Date: 11/01/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS PROJECT ENGINEERING MANAGER - MACHINE SYSTEM

Description:
JSG is hiring a Systems Project Engineering Manager for our client in Los Angeles, CA!

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Systems organization.
Work with his or her peer, the Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations. Deliver quality products on time.
Manage development projects that provide new and innovative systems features and capabilities.
Oversee and support the quotation activities for systems.
Proposal writing and cost estimating.
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.

Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.

Cost estimation includes estimation of NRE, RE, assembly, testing and materials.

Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development, reporting, and participation in company-wide management and process improvement initiatives.

Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added systems features and capabilities.

Requirements:
Eight years experience in a technical management capacity at an industrial firm.

BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation.

Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish
day-to-day tasks while continuing to make progress, and bring to completion, longer term projects.
Good verbal and written communication.

US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 07/31/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical / Structural Engineer Level 4

Description:
Location: Vandenberg AFB, CA
Rate: DOE
Duration: 1 year contract
Shift: Must be available for any shift (second/third shifts and weekends as required)
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
The Mechanical/Structural Engineer will produce moderately-complex technical designs and some mechanical analysis of new and existing facility related systems in support of our clients Atlas V, Delta IV and future Vulcan Launch Operations at Vandenberg Air Force Station in California. The successful candidate, as part of our clients Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

Requirements:
- The successful candidate should have at least (10) years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial mechanical systems.
- Experience with hydraulics, motors, cranes, door and platform systems is desired.
- Engineer shall have experience managing contractors, trouble shooting issues with large mobile structures and authoring operational instructions for complex systems.
- Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations.
- Project support will also include generation of Statement of Work, Contractor documents for schedule integration, fabrication and installation phases.
- The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities.
- The successful candidate should be self-motivated and able to work productively without constant direct supervision.
- He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments.
- Some outside work climbing stairs and accessing ladders will be required.
- He/she may need to work at heights on launch structures and facility catwalks.
- The successful candidate shall be willing to support second/third shifts and weekends as required.


Required Skills:
- This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards.
- At least 10 years of recent Autodesk AutoCAD experience.
- Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 9010
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 08/08/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical / Structural Engineer Level 4

Description:
Location: Decatur, AL
Rate: DOE
Duration: 1 year contract
Shift: Must be available for any shift (second/third shifts and weekends as required)
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
The Mechanical/Structural Engineer will produce moderately-complex technical designs and some mechanical analysis of new and existing facility related systems in support of our clients Atlas V, Delta IV and future Vulcan Launch Operations at Decatur, AL. The successful candidate, as part of our clients Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

Requirements:
- The successful candidate should have at least (10) years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial mechanical systems.
- Experience with hydraulics, motors, cranes, door and platform systems is desired.
- Engineer shall have experience managing contractors, trouble shooting issues with large mobile structures and authoring operational instructions for complex systems.
- Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations.
- Project support will also include generation of Statement of Work, Contractor documents for schedule integration, fabrication and installation phases.
- The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities.
- The successful candidate should be self-motivated and able to work productively without constant direct supervision.
- He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments.
- Some outside work climbing stairs and accessing ladders will be required.
- He/she may need to work at heights on launch structures and facility catwalks.
- The successful candidate shall be willing to support second/third shifts and weekends as required.


Required Skills:
- This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards.
- At least 10 years of recent Autodesk AutoCAD experience.
- Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 9567
Job Location: Decatur, AL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer (Aerospace) - China

Description:
Leading aerospace company are seeking a highly experienced Senior Systems Engineer for the high level systems definition, analysis and architecture specification for a new commercial aircraft project. This will be based at their modern facility in Shanghai. Duties and responsibilities will include:-

* Aircraft operation scenario analysis and definition, building aircraft scenario database.

* Aircraft function analysis and model based on aircraft operation scenario and functional interface definition.

* Develop of methods and process for aircraft function definition and analysis.

* Aircraft architecture design and trade study, design aircraft functional architecture and physical architecture.

* Support aircraft requirements validation based on models.

* Support to define aircraft-level scenario for integration and verification

They are seeking a Senior Systems Engineer with extensive commercial aircraft development experience, who has the ability to take an overview of the complete aircraft systems definition and architecture. This will include familiarity with aircraft development process (SAE ARP4754A?SAE ARP4761 etc.) knowledge of civil aircraft airworthiness and regulations(FAR/CS/CCAR25).

This position will be on a fixed-term contract basis of 2-3 years initially, with a strong likelihood of further work beyond this. They come with an attractive salary package which includes allowances for accommodation, home leave (typically 4 times a year), local transport, healthcare etc
 
Job Number: JO0000000154
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: Sept 18 onwards
Input Date: 08/02/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer - Clearance FL

Description:
162590
Job Title: Senior Systems Engineer

Work Site Address: Melbourne, FL, 32934
Job Number: 5436
Max Pay Rate: 38.00



Job Summary:
The Senior Systems Engineer will provide advisory and assistance support to the Air Force Technical Applications Center (AFTAC) National Technical Nuclear Forensics (NTNF) program to advance capabilities to collect forensic analysis on nuclear and other radioactive materials.

Job Description:
Roles and Responsibilities
• Apply and interpret the formal Systems Engineering processes
• Conduct functional configuration audits
• Review software testing to ensure requirements traceability
• Support acquisition and sustainment of computer systems and software development, testing, and evaluation of improvements to systems and equipment
• Review program schedule, program progress, and compliance with entry/exit criteria
• Review Engineering Change Proposals (ECPs) and Configuration Change Proposals (CCPs)
• Participate in software testing and review of associated test reports
• Develop computer software/hardware requirements packages and acquisitions
• Provide budget estimations and technical assistance for research and development projects
• Support management of Department of Defense (DoD) research programs and capabilities
• Provide technical and acquisition tasks in support of capabilities and systems enabling the NTNF programmatic and technical team
• Attend meetings and teleconferences, prepare briefings and position papers, and identify potential opportunities or issues with systems
• Support the development, installation, integration, testing, and sustainment of new and existing systems
• Support information exchange event

Qualifications and Education Requirements
• Minimum of 10 years of relevant experience performing tasks similar to those above
• General knowledge of FORTRAN, C, C++, Python, and Java programming languages
• Working knowledge of UNIX
• Strong interpersonal and communication skills necessary to communicate with executives
• Ability to apply Defense Acquisition Guidebook, Policies, Directives, Regulations, and Laws
• General experience using Microsoft Project, Excel, PowerPoint, and Word
• Experience in deriving and marking classified documents according to the National Industrial Security Program (NISPOM) and security classification guides; Maintaining the protection and integrity of classified information

• Master’s Degree with 5+ years’ experience or a Bachelor’s Degree with 10+ years’ experience in an engineering discipline with systems engineering experience or preferably, a systems engineering degree.

Preferred Skills
• Certified Software Development Professional (CSDP) (Previously known as Certified Software Engineering Professional (CSEP))
• Project Management Professional (PMP) Certification
• Security+ Certification
 
Job Number: JK-5436TS
Job Location: Melbourne, FL
Rate: 38/hr
Per Diem: no
Duration: 12 months
Input Date: 07/25/2018
Last Updated: 08/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Shipping & Receiving Specialist

Description:
PDS Tech, Inc. is seeking Shipping & Receiving Specialists in Bolingbrook, IL.  Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480.351.2945

In this role, you will assist the teams that make personal protection equipment used to protect electrical workers from the hazards of their job.

What you will do:
  • Pick, pack, and prepare items for shipment using a forklift or other vehicle or tool.
  • Scan items and verify orders.
  • Create shipping labels.
  • Wrap skids to load into truck. 

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training and certification in the operation of Power Industrial Vehicles, such as forklifts, stand up, and cherry pickers 
  • Opportunity to work with a team making products to keep others safe
  • A fair and consistent pay check


Skills and equipment you will need:
  • Experience with FedEx, UPS, and LTL Freight
  • Steel-toed shoes required
  • Experience working in a warehouse environment

Education Required:

  • High school diploma or GED

Experience Desired:

  • Experience operating forklifts, cherry pickers, and RF Scanners 

Schedules/Shifts Available:

  • Most positions are 2nd shift, 2:30 pm – 11:00 pm
  • Overtime may be available, including some Saturdays 

 
Job Number: 1810080229
Job Location: Bolingbrook, IL
Duration: 8 months
Input Date: 05/31/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fKwAAI&URLSource=cjhunter

Shipping/Receiving Specialist

Description:
PDS Tech Inc. is seeking candidate for Shipping/Receiving Specialist, located in Muncie, IN.

Summary:
  • Candidate will be working in the shipping department.
  • Candidate will be working with spray foam and instapak.
  • Must be able to understand packing slips.
  • Attention to Detail (candidates will be verifying orders are complete before shipment).
  • Use of hand trucks (full-time employees generally use the powered industrial vehicles in this area).
  • Must be a team player.
  • Ability to use a tape measure (measurements must be placed on boxes for export).
  • Load delivery trucks.
  • Possess good penmanship (packing slips must be readable).
  • This area can be very physical (a lot of lifting and bending involve).
  • Confirms and records the receipt of shipments, prepares items for shipping, and loads and unloads trucks.
  • Reports damages and discrepancies for accounting, reimbursement and record-keeping purposes.
  • Completes shipping and receiving reports.
  • Also responsible for managing the inter-departmental transport of materials.
  • Relies on extensive experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a manager or head of a unit/department.


Prerequisites:
  • Requires a high school diploma or equivalent with 0-2 years experience.
  • Familiar with a variety of the field's concepts, practices, and procedures.


 
Job Number: 1810084333
Job Location: Muncie, IN
Duration: 8 months
Input Date: 04/06/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mMByAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. IT UX Designer

Description:
Location: Savannah, GA
Pay rate $60.00 - $75.00/HR
Duration: Long Term contract
Shift: 1st Shift

****Must be a US Citizen****

Unique Skills:
You'll provide user experience guidance to company business units including Sales, Marketing, Manufacturing, Quality, Customer Support, and Business Technology. You'll lead the day-to-day design of products that assist pilots in their flight-planning efforts, that facilitate collaboration between our interior designers and our customers, and that leverage industry-first Wearable technology to allow our enterprise users to build the world's finest aircraft. You'll use design research methods to gather requirements from users and business stakeholders. You'll work in an Agile Scrum process and will be co-located with team members with roles as Scrum Masters, Developers, and Quality Assurance Analysts. You'll play a key role in the evolution of our design systems and style guides. You'll help shape the look and behavior of our products, while working alongside stakeholders from our various business units. You'll build a living library of patterns, and help communicate its value to the organization. We'll be continuing to expand the reach of User Experience from native mobile apps to other parts of the business. This reach could includes platform agnostic technologies and embedded software, which means experience with responsive design, physical controls, and wearable technology are of added benefit.

Education and Experience Requirements:
Bachelor's Degree in User Experience Design, Graphic Design, Industrial Design, Human Computer Interaction or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience. 6 years experience as a UX professional.

Position Purpose:
Define interaction models, user task flows, and interface specifications. Communicate scenarios, end-to-end experiences, and screen designs to stakeholders and development teams. Typically responsible for ownership of a project or a significant product release. Formally or informally presents design concepts and deliverables to design team and internal stakeholders and gets approval to move projects forward and drive them to completion. Participates in both internal and external design reviews.

Principle Duties and Responsibilities:
Essential Functions: 1. Gather user needs via design research methods. 2. Communicate learnings and requirements to business colleagues. 3. Generate ideas via sketches, mockups, and prototypes for testing with users. 4. Research existing design patterns and best practices and apply to design problems. 5. Critique and refine design ideas with UX team members. 6. Create user tasks and conduct usability tests to evaluate concept directions. 7. Create mockups and prototypes to communicate desired directions to development team members. 8. Create final specs and assets for implementation. 9. Work collaboratively with developers to create solutions that find a balance between business needs, usability, and development effort. 10. Support and improve our existing portfolio of products.

Additional Functions: 3. Using knowledge of research methodologies and design patterns, mentors junior staff on UX competencies. 1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of performance. 2. Proactively communicates issues and status as required. Perform other duties as assigned.

Other Requirements: 1. Experience working in teams. 4. Experience with Agile Scrum development methodologies preferred. 3. A portfolio of work that demonstrates your skills, and the ability to articulate your role on the projects it contains.
 
Job Number: 9514
Job Location: Savannah, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/18/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/01/2016
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/22/2018
Last Updated: 11/19/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supervisor, Aircraft Equipment and Furnishing - JF

Description:
Our customer is looking for a Supervisor for their Aircraft Equipment and Furnishing. Will oversee and coordinate all interior systems project efforts, including conceptual design, preliminary design, detailed design, validation, certification, production, and field service. Leads team of engineers, engineering designers, and industrial designers responsible for aircraft interiors and seating systems across all aircraft models. Will be Supervising up to 6 people.

(Requirements) Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or similar. Five years of work experience and Supervisory experience. CAD experience, preferably Pro-E/CREO. Advanced 3D surfacing abilities, preferably ICEM. Experience producing production part and assembly drawings. GD&T proficiency. Experience with FAA Part 23 requirements and means of substantiation, specifically 23.562, 23.853, 23.855, and 23.785.
 
Job Location: Duluth, MN
Input Date: 08/02/2018
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Jim Fry
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: NO

****MUST be a U.S. Citizen or Permanent Resident****
****MUTS have a Bachelor's Degree****

Job Description:
- Manages a team and provides direction for systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, systems analysis for safety of system, systems research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes.
- Integrates system activities to support the aforementioned tasks. Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.

Additional Job Details:
Our client is one of the world's largest suppliers of technologically advanced aerospace and defense products. The ISR & Space Systems business unit provides products and services to global government and commercial markets that enable mission success in the harshest environments in space, in the air, at sea, and on the ground. We design and manufacture Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) on a number of space & sea platforms including the International Space Station, the U.S. space suit, and the next generation of space vehicles such as CST-100 and Orion, and the US Navy’s submarine fleet. We are looking for an enthusiastic and highly motivated individual to join us as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.

Responsibilities include:
- System development trade studies and optimization, development of concepts of operations, developing product requirements at the system/component level for mechanical / electrical / software, thermal/fluid/chemical system modeling, steady state & transient performance analyses, as well as component sizing.
- Skills in computational fluid dynamic (CFD) modeling and finite element heat transfer modeling are highly desirable.
- Skills in SINDA/Fluent, ANSYS ICEPAK/CFX/Workbench, StarCCM+, Matlab/Simulink/Simscape, Excel & VBA, MathCAD, DOORS & DXL, Model Based Systems Engineering (MBSE), SysML, MagicDraw & Cameo Modeler strongly desired.

Education / Certifications:
- Bachelors in Mechanical/Aerospace/Chemical/Systems Engineering with at least 5 years of experience

Experience / Qualifications:
- Experience on hardware development program: proposal / development / manufacture / verification / operational support
- Experience performing system development/integration/architecting
- Experience performing thermal/fluid/chemical analyses
- Relevant component hardware experience: heat exchangers, pumps / fans / separators / motors / motor controllers, chemical beds, sensors, valves, accumulators
- Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
- Ability to work well both independently and within an integrated product development (IPD) team environment
- Ability to lead a small team of technical associates
- Excellent attention to detail
- Excellent writing & math skills
- Must be a US Person
 
Job Number: 9391
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 09/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Systems Engineer - (2) - CA - C

Description:
Chipton-Ross is seeking 2 Systems Engineer 4 located in El Segundo, CA

RESPONSIBILITIES:
As an Experienced DSP Subsystems/Algorithms Engineer (Level 4), you will design and develop state-of-the-art, space based communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated team that works with domestic or international customers on their latest satellite systems.

Subsystems or Algorithm duties include:
o Designing and developing next generation RF and digital satellite communication systems
o Developing and verifying multi-rate, fixed-point signal processing algorithms
o Conducting performance analysis of signal processing models
o Performing waveform development and characterization
o Performing trade studies
o Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
o Supporting HDL-level design and verification
o Performing detailed system design and verification activities
o Leading teams
Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to satellite unit development and test. Candidates will belong to or lead a systems engineering team interacting with customers, suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 3+ years of experience with Matlab or Simulink.
- 5+ years of experience in Digital Signal Processing or Digital Communications
- 5+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture design and trade design).
Preferred Skills:
- Proficiency in Matlab/Simulink.
- Experience leading teams of engineers.
- Experience working with ASICs or FPGAs
- Experience with lab equipment (oscilloscope, waveform generator, spectrum analyzer)
- Experience leading teams of engineers

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167899
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 11/19/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3 - CA - O/M

Description:
Chipton-Ross is seeking a Systems Engineer 3 located in El Segundo, CA

RESPONSIBILITIES:
As a DSP Subsystems Firmware Engineer (Level 3), you will design and develop state-of-the-art, space-based communication systems for commercial, civil and/or national security programs. You will be part of a highly-motivated team that works with domestic or international customers on their latest satellite systems.

Primary Responsibilities:
o Defining and developing satellite communications system and unit architecture
o Developing and verifying multi-rate, fixed-point signal processing algorithms
o Conducting performance analysis of signal processing models
o Performing waveform development and characterization
o Supporting trade studies
o Supporting unit-level integration and performance simulations
o Supporting HDL-level design and verification
o Supporting hardware procurement, design reviews, and unit sell-offs

Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers, suppliers, program management, integration and test engineers, and senior technologists.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers.
Join us, and you can build something better for yourself, for our customers and for the world.

Other Job Related Information/Qualifications:
Qualified candidate must have demonstrable experience in digital communication theory and systems, digital signal processing (DSP) concepts, waveform design and implementation, development of algorithms for hardware implementation on ASICs or FPGAs, and verification planning and principles, while applying their theoretical knowledge in resolving real world problems.

Basic Skills:
- 1+ years of education/training and/or work experience with Matlab and/or Simulink.
- 3+ years experience in Digital Signal Processing/Digital Communications algorithms and techniques (equalization, turbo/viterbi coding/decoding, channel estimation, filter design, resampling theory, etc.).
- 1+ years of experience working with ASICs or FPGAs.

Preferred Skills:
- Proficiency in Matlab/Simulink
- Proficiency in Simulink HDL Coder

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167901
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 11/19/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3-C

Description:
Chipton Ross is seeking a Systems Engineer for a contract position in El Segundo, CA.

RESPONSIBILITIES:
As an Early Career DSP Subsystems/Algorithms Engineer (Level 3), you will design and develop state-of-the-art, space based
communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated
team that works with domestic or international customers on their latest satellite systems.
Subsystems or Algorithm duties include:
Designing and developing next generation RF and digital satellite communication systems
Developing and verifying multi-rate, fixed-point signal processing algorithms
Conducting performance analysis of signal processing models
Performing waveform development and characterization
Performing trade studies
Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
Supporting HDL-level design and verification
Performing detailed system design and verification activities


Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to
satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers,
suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory
and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 1+ years of experience with Matlab and/or Simulink.
- 3+ years of experience in digital signal processing or digital communications
- 3+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture
design and trade design).

REQUIREMENTS:
- Proficiency in Matlab/Simulink.
- Experience working with ASICs or FPGAs
- Experience with performance characteristics of analog electronics or data converters (ADCs / DACs)
- Experience with digital/RF lab equipment (oscilloscope, signal generator, spectrum analyzer)

EDUCATION:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
First Shift - 8-5PM, 5/40

TRAVEL:
10%

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 167895
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 03/14/2018
Last Updated: 11/19/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor/Writer - Level 3

Description:
Location: Grand Prairie, TX
Rate: $51.00/HR
Duration: 1 year contract
Shift: 1st Shift

****MUST be a U.S. Citizen****
****Candidates need experience working with MIL-STDs (especially MIL-STD 40051-1) ****
****Must have strong experience with XML. XLST and Arbortext needed****
****Experience with a Content Management System needed****
****MS Office required****
****2-3 years minimum recent experience required****

Job Description:
Technical Publications Writer that provides a wide array of technical documentation written to Military Specifications. Primary responsibilities include developing and validating Interactive Electronic Technical Manuals (IETMs), Depot Maintenance Work Requirements (DMWRs), Repair Parts and Special Tools Lists (RPSTLs), procedural art and illustrated graphics all developed to applicable Military Specifications. Candidate must possess excellent written and oral communication skills and be able to work well in a team environment. Must be flexible with outstanding work ethic and possess the ability to respond quickly to company and client needs. Must be able to interface with Subject Matter Experts (SMEs) to verify and understand technical concepts and develop courses of action to ensure project completion is on time and within budget. Candidate must be familiar with layout, design and structure of Organizational, Intermediate and Depot level Technical Manuals (TM’s)' including Operation and Maintenance, Theory of Operation, Fault Isolation Procedures, and Illustrated Parts Breakdowns (IPB’s). Must be able to read and interpret engineering drawings and software description documents. Candidate must be willing to work overtime as required. Some travel may be required.

Skill/Experience/Education
Mandatory: MUST BE SHOWN IN RESUME
****Candidates need experience working with MIL-STDs (especially MIL-STD 40051-1) ****
****Must have strong experience with XML. XLST and Arbortext needed****
****Experience with a Content Management System needed****
****MS Office required****
****2-3 years minimum recent experience required****
- Candidate must possess strong interpersonal skills
- Demonstrated written and oral communication skills
- Abilities to read and interpret Engineering drawings, schematics
- Strong teaming skills.
- Be flexible with an outstanding work ethic and possess the ability to respond quickly to internal and external customer requirements.
- Must have 2-3 years of professional experience

Must have experience/working knowledge of the following:
- EXtensible Markup Language (XML)
- Extensible Stylesheet Language Transformation (XSLT)
- MIL-STD-40051-1 and MIL-STD-40051-2 preferably Revision B
- MIL-STD-2361C or later release
- Arbortext Editor including Styler (5.4 or higher)
- UltraEdit or similar
- Adobe Acrobat Pro
- Content Management Systems such as WindChill
- Proficient with Microsoft office (Word, Excel, Project, PowerPoint)Must be familiar with layout, design and structure of Organizational, Intermediate and Depot level Technical Manuals (TM’s)' including Operation and Maintenance, Theory of Operation, Fault Isolation Procedures, and Illustrated Parts Breakdowns (IPB’s).
- Ability to produce illustrations using graphics tools such as ISOdraw, Autrotrol or similar graphics tools
- Ability to acquire and verify content and illustrations by coordinating across Engineering Disciplines, observing production methods, referring to engineering drawings, notes, manuals, and similar publications.
- Ability to write using clear and concise language that adheres to customer-established standards and conventions.
- Ability to write technical content for maintenance technical manuals including installation, test, repair, and troubleshooting procedures.

Desired:
- Experience with Electronics, Hydraulics and Mechanical Systems
- Experience with Multiple Launch Rocket System (MLRS)/ High Mobility Artillery Rocket System (HIMARS)
- Past experience working with US Army or other Military publications
- Interactive Authoring and Display System (IADS) 4.0 or later
- Electronic Maintenance System (EMS) Next Generation (NG)Bachelors or Master’s Degree in Information Technology, Electrical Engineering, Mechanical Engineering or Industrial Engineering
 
Job Number: 9550
Job Location: Grand Prairie, TX
Rate: $51.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 07/30/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician

Description:
Job Description:
Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.

Skill/Experience/Education:
Mandatory:
Electrical, fabrication, troubleshooting
 
Job Number: 09815
Job Location: Orlando, FL
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810083900
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 04/06/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKu6AAE&URLSource=cjhunter

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 03/27/2018
Last Updated: 11/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design

Description:
Seeking a Tool Designer located in Palmdale, CA.

RESPONSIBILITIES:
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems. May use CAD/CAM to design tools.

REQUIRED EXPERIENCE:
Aerospace Tool Design experience required.
5000+ hours of CATIA V5 experience designing tools.
Experience with CATIA 4-6 years, Computer Aided Design 4-6 years, and Tooling 4-6 years.

EDUCATION:
Accredited BS+9-15 YRS or MS+7-13 YRS

WORK HOURS:
Full-Time/First Shift
 
Job Number: 172656
Job Location: Palmdale, CA
Rate: $60.50
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 08/06/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design

Description:
Our client in Palmdale, CA is seeking out a tool design engineer to join their team. Read below for more details!

The ideal candidate for this position will perform the following tasks:
* Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
* Complete understanding and wide application of technical principles, theories and concepts, in the field.
* Independently determines and develops approach to solutions.
* Provides technical solutions to a wide range of difficult problems.
* May use CAD/CAM to design tools.

Mandatory Qualifications and Experience:
* ITAR is required.
* Must be a U.S. Citizen.
* Aerospace Tool Design experience required.
* 5000+ hours of CATIA V5 experience designing tools.

Desired Qualifications and Experience:
* An active secret security clearance is preferred but NOT required for ADP unclassified programs.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128439
Job Location: Palmdale, CA
Duration: 1 year
Start Date: ASAP
Input Date: 08/03/2018
Last Updated: 08/10/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
UX Designer

Description:
Location: Savannah, GA
Pay rate $40.00-$60.00/HR
Duration: Long Term contract
Shift: 1st Shift

****Must be a US Citizen****

Unique Skills:
You'll join a high-performing team of User Experience Designers as an advocate for user-centered design processes within an enterprise design organization. Experience in Design Operations and Project Management is of added benefit. You'll provide user experience guidance to company business units including Sales, Manufacturing, Quality, Customer Support, and Business Technology. You'll use design research methods to gather requirements from users and business stakeholders. You'll work in an Agile Scrum process and will be co-located with team members with roles as Scrum Masters, Developers, and Quality Assurance Analysts. You'll play a key role in the evolution of our design systems and processes.

Education and Experience Requirements:
Bachelor's Degree in User Experience Design, Graphic Design, Industrial Design, Human Computer Interaction or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience. 3 years experience as a UX professional.

Position Purpose:
Define interaction models, user task flows, and interface specifications. Communicate scenarios, end-to-end experiences, and screen designs to stakeholders and development teams. Typically responsible for ownership of a small project or a significant portion of functionality on a product release. Informally presents design concepts and deliverables to design team; works with more senior designers to get approval to move projects forward and drive them to completion. Participates in both internal and external design reviews.

Principle Duties and Responsibilities:
Essential Functions: 1. Gather user needs via design research methods. 2. Communicate learning's and requirements to business colleagues. 3. Generate ideas via sketches, mockups, and prototypes for testing with users. 4. Research existing design patterns and best practices and apply to design problems. 5. Critique and refine design ideas with UX team members. 6. Create user tasks and conduct usability tests to evaluate concept directions. 7. Create mockups and prototypes to communicate desired directions to development team members. 8. Create final specs and assets for implementation. 9. Work collaboratively with developers to create solutions that find a balance between business needs, usability, and development effort. 10. Support and improve our existing portfolio of products.

Additional Functions: 1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of performance. 2. Proactively communicates issues and status as required. Perform other duties as assigned.

Other Requirements: 1. Experience working in teams. 4. Experience with Agile Scrum development methodologies preferred. 3. A portfolio of work that demonstrates your skills, and the ability to articulate your role on the projects it contains.
 
Job Number: 9513
Job Location: Savannah, CA
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/18/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wind Project Engineer

Description:
Wind Project Engineer

Location: Jackson, MI
Duration: 1 year

Duties:
The primary role will be to support the development and execution of a new large-scale wind powered electric generating facility located in Michigan. The Wind Project Engineer is responsible for engineering, design, and delivery of grid connected wind generation systems on time and on budget.

Key Responsibilities include:
- Development, administration, and oversight of a wind farm EPC contract.
- Development, administration, and oversight of a major wind turbine generator purchase agreement contract.
- Review and approve submittals.
- Coordinate the response to requests for information (RFI)
- Support all site permitting and site logistics and planning
- Consults with the project construction organization concerning design constructability as related to field conditions, sequencing and scheduling of construction activities.
- Consults with project management concerning schedule, budget, and contractual terms as related to engineering deliverables.
- Support the development of technical specifications and bid documents for engineered equipment, materials engineering, and construction contracts
- Support the project in the evaluation engineering, vendor and contractor capabilities
- Responsible for the oversight of detailed design documents by the Engineer of Record, either by internal project engineering staff or by contracted services.
- Identify, analyze and recommend corrective actions to technical issues identified in the field during project execution or initial operation.
- Develop and/or review engineering drawings and calculations that detail plans and specifications for wind construction projects.
- Support testing and commissioning of new wind generation facilities.
- Communicate effectively with a vast group of stakeholders to ensure all technical aspects of the projects are completed per the safety, scope, schedule, and budgetary objectives.
- Attend and/or lead project coordination meetings.
- Participate in the closeout of projects including turnover of project files and record documents at project closure; captures lessons learned.
- Wind project development support including site feasibility studies, conceptual engineering design, and cost estimating support.

Skills:
The following skills and experience may set candidate apart from others:
- Experience in Wind Generation system design, permitting, construction, commissioning, operation, or maintenance.
- Experience with EPC contracts
- Experience with interconnecting wind generation to the electric transmission system.
- Experience in project management including the oversight of scope, schedule, and budget.
- Experience in procurement of engineered material, equipment and professional services.
- Experience coordinating and developing contract documents, specifically engineering drawings and technical specifications for both consulting and construction services.
- Advanced Electrical Engineering degree from an ABET accredited university.
- Professional Engineer (PE) License.

Education:
Bachelor of Engineering degree from an ABET accredited university.

Required Skills:
- Engineering Design
- EPC
- Project Engineer
- Wind Farm
- Permitting

Additional Skills:
- Engineer
- Estimating
- Feasibility
- Procurement
- Project Development
- Technical Specifications
- Body Engineering
- Construction Contracts
- Contracts
- Electrical Engineering
- Logistics
- Maintenance
- Materials Engineering
- Pre-Construction
- Project Management
- RFI
- Scheduling
- Sequencing
- Turbine
- Turbine Generator

Languages: English (Speak, Read, Write)

Minimum Degree Required: Bachelor's Degree

Call Notes:
- Someone that will help support remaining development activities for new wind assets
- Engineer responsible for developing and administrating the EPC contract
- Knowledge of EPC and how it’s handled
- Technical resource to getting major contract in place
- Procurement of wind turbine generating equipment
- Provide support to acquire wind resources and additional resources to design and construct
- Open for Civil Engineers / Mechanical Engineers if they have the right skill set
 
Job Number: 18-12254
Job Location: Jackson, MI
Per Diem: Yes
Overtime: Yes
Duration: 1 Year
Input Date: 08/08/2018
Last Updated: 08/21/2018
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Back to Advanced Job Search