Job Search Results

267 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/07/03 Friday 06:17PM Pacific Time by ContractJobHunter. )

Listings 1 - 267

Go To My Job Tracker

Expand all descriptions

ASIC/FPGA (VHDL) Design Engineer

Description:
Our client is seeking a motivated candidate to work on implementation of digital logic for space applications. This position is based at our Space Park campus in Redondo Beach, CA. Duties include VHDL design of ASIC and/or FPGA logic, verification via simulation and emulation (lab testing), synthesis, and timing analysis.


Additional responsibilities include:

Designs and develops circuits used in electronic devices. device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information

Qualifications:

 Basic Qualifications:

- Bachelor’s Degree in Electrical or Computer Engineering from an accredited institution with minimum of 14 years of experience with Logic Design in VHDL or Verilog; or 12 years of experience with Masters Degree
- Must have the ability to obtain and maintain an active Government clearance

Preferred Qualifications:

- Hands-on lab experience with testing of digital hardware is highly desired
- Experience with Digital Signal Processing (DSP)
- 15 years or more of digital Logic Experience
- Security Clearance (any level)
 
Job Number: x20200041
Job Location: Redondo Beach, CA
Rate: $90/hr
Duration: up to 1 year
Input Date: 04/22/2020
Last Updated: 07/02/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Quality Engineer

Description:
Advanced Quality Engineer

Job ID # 2020-11283

Contract Opportunity

Location: Orlando Florida

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Design, implement, and maintain quality assurance protocols and methods for processing materials into partially finished or finished products
Perform analysis of reports and production data to identify trends and recommend updates or changes to quality standards and procedures when necessary
Provide technical review of documents, drawings, assembly instructions, and project plans
Compare defects against standards and recommends dispositions, verifies implementation of rework,   supports incoming/shipping inspection processes, as needed
Collect, organizes and analyzes project data, generates and/or reviews metrics
Perform audits, assigns corrective action, and verifies implementation
Participate in project reviews and meetings including technical design reviews, technical peer reviews, material review boards, change control boards, failure review boards
Participate in continuous improvement and problem solving activities within the project
Review documents/Drawings/Instructions for conformance to requirements
 

What You’ll Need:

Fully proficient knowledge of engineering (i.e., software, electrical, systems, etc.) methodologies, tools, and standards
Fully proficient knowledge of ISO 9001:2008, CMMI, ISO 14001ASME, ANSI, EIA, etc.
Fully proficient knowledge of use of relevant inspection/measurement tools and techniques
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree in Engineering, a related specialized area or field combined with 5 + years of relevant experience; or Master’s Degree combined with 3 + years of relevant experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11283
Job Location: Orlando, FL
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electrical Systems Engineers

Description:
STS Technical Services is hiring Aerospace Electrical Systems Engineers in Oklahoma City, Oklahoma.

Job Duties:
Responsible for design, analysis, and substantiation of STC projects for Air Transport Aircraft
The Electrical Engineer will work under the direction of a more Senior Design Engineer
Engineer will work on green aircraft and aircraft systems such as GPS, TCAS, ATC, ADS-B, SATCOM, Radar, and EO/IR, and their associated controllers, annunciators and antennas
Work location is at the Oklahoma City airport
Essential Qualifications:
2-5 years of experience
Knowledge of general aircraft structural drawings
Construction of Block Diagrams, Wiring Diagrams, Wire Routing Diagrams, STC kit Manufacturing Diagrams in AutoCAD or similar CAD systems
Performing Surveys of customer aircraft to determine design requirements
US Citizenship
Preferred Qualifications:
Knowledge of ATA Drawing & Document Standards
Knowledge of 14 CFR Part 25 Aircraft architecture
Knowledge of industry standards, connectors, accessories and bus logic/ levels
Knowledge of FAA STC Certification process
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34566
Job Location: Oklahoma City, OK
Input Date: 05/27/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrician/Avionics

Description:
Aircraft Electrician/Avionics

Job ID # 2020-11206

Contract Opportunity

Location: Jacksonville, FL

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Assist in the performance of aircraft bench and or flight line operational testing, troubleshooting, adjustment, repair and installation of any complex or non-complex aircraft electrical or electronic system in the testing development and modification of aircraft and related systems.
Perform assembly, installation, check-out physical characteristics, operational testing and modification of wire bundles in the testing, development and modification of aircraft in accordance with DOD, manufacturer, company supplier and other directives.
Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.
Able to use common hand tools.
Able to perform close tolerance assemble operations.
Order parts, pan stock, tools, materials and equipment as required to perform assigned duties.
Responsible for complying with all rules and regulations concerning health and safety, FOD prevention, tool control, contracts, facilities and other pertinent processes and procedures.
Responsible for the proper performance of assignments and the prudent handling of product, tools and equipment.
Perform other duties as directed by supervisor and management for the benefit of the company, program or employees.
What You’ll Need:

Able to effectively communicate orally and written with other employees, members of supervision and others as required in their duties.
Able to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.
Able to perform assigned duties while wearing required safety equipment.
Able to perform assigned duties on all shifts without encumbrances due to weather or physical location and conditions.
Required Avionics knowledge for trouble-shooting during induction and delivery of all aircraft.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma/GED
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11206
Job Location: Jacksonville, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II

Description:
Aircraft Mechanic II

Job ID # 2020-11235

Contract Opportunity

Location: Jacksonville, FL

Industry: Aerospace & Defense

Minimum Experience: 5 Years

 

What You’ll Do:

Maintain repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. applies required expertise in restoring equipment condition and or operation.
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
Receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
 

What You’ll Need:

Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts,
Require broad knowledge of aircraft sheet metal/structural modifications and repair,
Must have basic knowledge of electrical theory,
Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Require working knowledge of technical publications.
 

Education & Experience:

5 + years of aircraft structural repair
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11235
Job Location: Jacksonville, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Airframe Structural Analyst

Description:
PDS Tech is seeking an Airframe Structural Analyst in Stratford, CT

The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
 
Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.
 
Specific functions include:
  • Static structural analysis and Margin of Safety determination,
  • Fatigue and fracture mechanics analysis of critical interfaces,
  • Determination of airframe component replacement and / or retirement times,
  • Specification and design of airframe related static and fatigue tests,
  • Field support and
  • Formal engineering documentation.

 
 
Education requirement: B.S.in M.E., A.E. or C.E., M.S. or M.E. preferred
 
Work Experience
Required:
  • Minimum of 12 years’ experience in the functions described above.
  • Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
  • Excellent oral and written communication skills

 
Software Experience:

  • NASTRAN/PATRAN or equivalent FEM,
  • Catia,
  • MS Office applications.

 
Secret Clearance preferred but not required.

  • US Citizenship Required. 

 
Job Number: 1910110199
Job Location: Stratford, CT
Duration: 15 months
Input Date: 02/03/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fbKqQAI&URLSource=cjhunter

Sr Electrical Assembler

Description:
PDS Tech, Inc. has multiple openings for a Sr Electrical Assembler position located in Owings Mills, MD.
Responsibilities:



Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Identifies units that fail tests or tolerance levels and repairs as necessary.

 
Must have 5+ electrical assembly experience - this site builds conveyor systems. This is actual assembly - must be able to read a schematic to assemble for specifications. Panel assembly experience is a plus. 
 
Job Number: 2010114548
Job Location: Owings Mills, MD
Duration: 4 months
Input Date: 05/20/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OrPbQAK&URLSource=cjhunter

Sr. Mechanical Assembler

Description:
PDS Tech, Inc. has multiple openings for a Senior Mechanical Assembler position located in Owings Mills, MD.
Responsibilities:



• Interpret and work from assembly drawings, schematics, sketches, and verbal instructions.

• Assemble with a high level of efficiency and quality.

• Provide feedback for continued improvement of processes and procedures.

• Maintain a well organized, neat, and safe work area.

• Assist in the training of new employees in the assembly area.

Mechanical Assembly experience
Qualifications:



Associates degree, Technical School, or 8 plus years of Industrial Manufacturing experience.

Experience in the following:



• Read and interpret electrical schematics and mechanical assembly drawings.

• Thorough understanding of electrical and mechanical assembly practices.

• Electrical panel building.

• Electrical testing and troubleshooting.

• Basic pneumatics system knowledge.



Personal characteristics:



• Self-motivated

• Flexible

• Punctual and reliable
 
Job Number: 2010114550
Job Location: Owings Mills, MD
Duration: 4 months
Input Date: 05/15/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OrPvQAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler B- Job ID 40959

Description:
We have an Excellent Contract position for an Assembler B to join a leading Company located in the Victor, NY area.

**U.S. Citizenship Required.

Under the general supervision, the assembler is responsible for assembling electrical/electronic box wires, circuit boards, and other components to metal shafts. Must be able to read blueprints, wiring diagrams, process sheets, and schematic drawings to assemble electronic and electro-mechanical products; enters the required information into a computer system.

Job Responsibilities:
Performs routine assembly operations of a repetitive nature on electromechanical components and subassemblies in the product line following the company's procedures for safety and quality.
Attaches hardware and seals assembly; Solders, lugs, routes, and ties electrical components.
Works with samples, simple drawings, as well as written and verbal instructions.
Uses hand tools such as long nose pliers, power screwdrivers, and soldering iron to perform work.
Assist with final quality testing of complete systems to make sure each is functioning according to customer specifications prior to shipment.
Inspects product as it is being built and refers any problem to Supervisor.
Daily communication with all team members and Supervisors.

Basic Hiring Criteria:
High School Diploma or equivalent.
Minimum two to four years of verifiable electrical/electronic assembly experience or equivalent combination.

Desired Qualifications:
IPC 610 and J Standard 0001 Certificate Preferred; requires previous assembly experience.
Basic computer skills
 
Job Number: 40959
Job Location: Victor, NY
Rate: $17 to $25.00
Per Diem: NO
Overtime: YES
Duration: Temp to Hire
Start Date: ASAP
Input Date: 05/12/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Assembly Supervisor-1st Shift

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.

  Requirements:
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following areas: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.

  Skills and Abilities Required:

  1. Strong problem solving, analytical, and technical skills.
  2. Strong oral and written communication skills.
  3. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  4. Experience implementing or being part of a Lean Manufacturing organizations.
  5. Demonstrated success in implementation of continuous improvement initiatives.
  6. Ability to read and interpret prints and engineering documents.
  7. Familiar with Microsoft Office (Power Point, Excel, and Word).
  8. Self-motivated with ability to foster moral among his/her team.

 
Job Number: 2010113604
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 04/15/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003On8NQAS&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 04/03/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Certification Engineer - Norther California

Description:
About the Job
Our client is looking for engineers experienced with civil aviation certification to join our growing team. This role will serve as an internal Subject Matter Expert as well as a primary external point of contact with regulatory agencies and industry standards groups for aircraft, system, and equipment-level aspects of avionics and electrical systems and equipment.

Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits at job site are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.
 
Job Number: t3255
Job Location: CA
Rate: Open
Duration: Direct
Input Date: 04/15/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Avionics Cockpit Systems Engineer

Description:
The Systems Engineer, Cockpit Avionics will be responsible for some or all systems related to:
• System 23 – Communication
• System 31 – Indicating and Recording Systems
• System 42 – Integrated Modular Avionics
• System 45 – Central Maintenance Systems
• System 46 – System Integration and Display

***Systems Engineers MUST HAVE experience with a direct design role in a program that has certified a new aircraft***

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working knowledge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 376
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 05/06/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Certification Engineer - Avionics and Electrical

Description:
Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 379
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 04/22/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Chemist/Engineer

Description:
Job Summary:
The Chemist/Engineer will work in Sartomer's 3D Printing R&D group at the Exton, Pa facility. The position will report to the Manager, Technical Service & Development or a Research Scientist.
Responsibilities:
" Work safely, responsibly and efficiently in a dynamic laboratory setting.
" Design, prepare, characterize and carry out applications performance testing on new formulations.
" Support synthesis and characterization of new or modified products.
" With supervision, plan and carry out multi-step experimental plans, including thorough application of rigorous experimental design methodology.
" Set up and use a range of analytical and applications testing equipment to collect data and solve problems. Gain understanding and make use of wider Arkema analytical and material testing capabilities.
" Demonstrates competence in problem solving methods and data collection.
" Function as active and effective member of multiple project teams.

LABORATORY: (80%)
" Familiarity with and participation in development of DOE for growth segment products
" Understand broader context of specific project responsibilities around technical and commercial objectives, previous experimental efforts, and related tools and technologies within Arkema.
" Perform routine laboratory testing tasks using analytical techniques such as DSC, DMA, TGA, UV/Vis and FTIR spectrometry, tensile, MVTR etc.
" Evaluate chemical and physical properties of various formulations and products in the growth area.
" Formulate products and components under the direction of supervisor.
" Learns and performs compounding techniques using twin screw extruder, etc.
" Works in cross functional and cross BU teams to accomplish laboratory milestones.
" Develop expertise in Sartomer technologies in areas of responsibility.
PRESENTATION AND REPORTING: (10%)
" Organize data for reporting to direct supervisor and functional management. Explain outcomes and make recommendations for improvements or next steps. Present results at work group and project team level, verbally and in writing.
" Explain project goals and status to business management and other internal customers.
" Become conversant with overall Sartomer technologies and markets
" Maintain complete and accurate records of experiments and results.
"
SAFETY: (10%)
" Compliant with all lab safety policies and procedures to maintain safe work environment.
" Fully comply with and participate in safety programs.
" Takes responsibility for personal safety and that of others.
" Participates in departmental safety initiatives, such as observations and assisting in development of SOPs
" Operate in compliance with site safety policies, including material handling and waste disposal.

Project work will take place in the corporate R&D facility located in Exton, PA. As with all laboratories a variety of chemical, physical ergonomic and electrical hazards exist. Safe work practices are a must and extensive training is provided to all employees to address hazards. This position may require some local travel to other Arkema sites to share knowledge, technical skill sets and equipment.

- Supports the site HES policy and complies with all regulatory and internal requirements
- Participates in HES activities provided by site management and Arkema Inc. (e.g., Behavioral Base Safety, SafeStart, etc.)
- Supports and promotes the reporting of all health, safety, environmental, near-miss, accident or injury incidents

Requirements:
2+ years' experience in chemical R&D laboratories.
Experience with materials characterization OR organic synthesis
Commercial laboratory experience strongly preferred.
Good interpersonal, organizational and communications skills.
" Experience in UV/EB curing preferred.
" Demonstrated expertise in generating accurate and reliable data in a timely manner
" Ability to organize, analyze and present data
" Demonstrated ability to complete work independently in a team focused environment
Demonstrated ability to engage with multiple levels of organization
Education:
B.S. degree in Chemistry, Chemical Engineer, Materials Science or other related field.
Schedule: Full time

 
Job Number: 183779
Job Location: Exston, PA
Rate: $DOE
Duration: 11 months
Input Date: 05/10/2020
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 04/11/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Control Systems Engineer

Description:
Tasks include analysis and testing of aircraft handling qualities, design of control laws, and development of simulation math models. This engineer will perform analysis and evaluation of total air vehicle stability and control characteristics to ensure acceptable handling qualities in compliance with specifications; apply control theory to the design of control laws that achieve desired characteristics for dynamic control response, gust or disturbance rejection, system failure robustness, and loads considerations; develop and validate both linear and nonlinear mathematical models of air vehicle and subsystem dynamics; and will use simulation and flight testing, including planning, data analysis and interpretation of test logs, to define handling qualities.
Qualifications
• B.S. + 3 years of experience, or M.S. in mechanical engineering, electrical engineering, aerospace engineering, computer science, or a related field
• Knowledge of aircraft flying qualities, flight dynamics, piloting control strategies, and flight control systems
• Proficiency in C/C++ desired
• Proficiency with MATLAB/Simulink desired
• Digital signal processing and controls education and/or experience desired




The Structures Company is an AA/EOE.
 
Job Number: 384
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April
Input Date: 05/09/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Engineer with Active Secret Clearance & ATO Certification

Description:
Cyber Security Engineer with Active Secret Clearance & ATO Certification

Must have 3 or more years of experience with DoD cybersecurity including RMF/ATO/DIACAP certification

Cyber Security Engineer
Wichita KS
Duration: 12 + month CONTRACT

The Cyber Security Engineer will develop, plan, organize and conduct complex design and Cyber Security certification assignments on client Aviation aircraft. This role will operate in one or more functional disciplines within engineering. Work requires use of advanced Cyber Security principles.

REQUIRED QUALIFICATIONS:
• Current CompTIA Security+ or equivalent certification
• Experience with Risk Management Framework (RMF) per DoDI 8510.01 or AFI 17-101
• Strong sense of accountability and integrity
• Excellent verbal and written communication skills
• Ability to read 2D drawings using standard industry practices

DESIRED QUALIFICATIONS:
• Current Certified Information Systems Security Professional (CISSP) or equivalent certification
• Current U.S. Secret or higher security clearance
• Experience with military avionics and mission systems, especially encrypted radios or military datalink communications systems
• 3 or more years of experience with DoD cybersecurity including RMF/ATO/DIACAP certification
• Bachelor’s Degree or higher in Computer Engineering, Electrical/Electronic Engineering, Cyber Security, Information Technology, or Computer Science

JOB RESPONSIBILITIES:
1. Responsible for completing complex development, design, testing and Cyber Security certification assignments for Platform Information Technology (PIT) during new aircraft design and avionics modifications. Serves as technical consultant for Program Protection activities, including Trusted Systems and Networks (TSN), Cyber Resiliency, Anti-Tamper, and Information Protection. Gathers data and prepares documentation in support of U.S. Government Assessment and Authorization (A&A) efforts to obtain Cyber Security Authorization to Operate (ATO) certification.

2. Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with suppliers to discuss and remedy issues in a more timely and efficient manner. Consults with customer Cyber Security representatives to develop and verify requirements, mitigate risks, and devise action plans.

3. Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.

4. Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.

5. Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.


If qualified, email a WORD version copy of your resume and then call Peggy at 774-210-4108 to discuss
 
Job Number: PL Cyber
Job Location: Wichita, KS
Rate: $85-100/per hr.
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 2 weeks
Input Date: 05/13/2020
Last Updated: 06/05/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

ELECTRICAL ASSEMBLER

Description:
Displays knowledge of Electrical Theory and usage of NEC and NFPA 79 in the assembly of machines with AC and DC circuits. Reads engineering drawings to assemble, rebuild, and repair electrical components.  Sets up and operates a variety of power tools (such as drill press, band saw and stud welder), to assist in the assembly of machines and components. Works unsupervised and provides training and cross-training to other employees. Coordinates with engineering personnel, and makes changes as required to update print packages.
ESSENTIAL DUTIES:
Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electrical equipment.
Assembles electrical components, sub-assemblies, and systems according to engineering drawings.  Positions and aligns parts in specified relationship to each other.  Mounts assembled components and attaches functional and cosmetic hardware such as caps, clamps and knobs.
Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures.
Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves.  Tests for proper sequencing of machine operations. Assists R & D technicians and engineering in developing new equipment.
Sets up and operates a variety of hand tools such as drill press, saws, shear and break.  Operates tow motor, pallet jack, hoist, pipe bender, pipe threader, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
Uses business system to enter time spent working on assemblies/sub-assemblies and to complete operations.
Uses PC to interface with programmable controllers and servo modules, transfer drive parameters and run diagnostics checks.  Must be able to manually load programs into electrical components.
Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in house testing and field installation of machinery.
Coordinates with engineering to ensure Engineering Change Requests are submitted.
Ensures that Engineering Change Orders are processed and assembled.
Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
Assists other departments to optimize throughput.
 
Completion of a Vocational Diploma in an electrical-related field, or equivalent experience or training. Must be computer literate and capable of reading engineering drawings.  Must have tools required to perform daily routines. Must be capable to set up and operate power tools.  Possesses basic knowledge of oscilloscope. Position requires a team player who is quality conscious, industrious and detail oriented. 

2nd shift Hours:  Mon-Thurs 2:25pm to 12:55am, 4-10's
3rd Shift Hours:  Mon-Thurs 9:30pm to 8:00am, 4-10's
 
 
Job Number: 2010112794
Job Location: Appleton, WI
Duration: 6 months
Input Date: 05/18/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002forTQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMS Project Coordinator

Description:
EMS Project Coordinator

Location: Auburn Hills, MI
Duration: 7+ months

Description:
The EMS project coordinator (PC) shall be responsible for managing 4 cylinder and Plug In Hybrid Electric Vehicle (PHEV) Engine Management Systems (EMS). This involves ensuring all changes required for critical development and production milestones are delivered on time and fully functional for global applications. In addition to new content changes, issue management and communicating criticality is an important task. The project coordinator runs weekly meetings with critical stakeholders to facilitate communication, and convey development and issue status. Additionally, the PC will attend Change Control Board (CCB) meetings as we team status and platform meetings.

Requirements:
Completed Bachelor of Science degree in Electrical or Mechanical Engineering
Must have 1-2 years’ experience of actual work exp in an automotive setting
Basic engineering knowledge of engine systems, transmission systems, power-train electrification systems, management systems, and or controls/software development is helpful, but not critical.
Manager will provide training, however, will require to work under minimal supervision
The ideal candidate will be organized, a strong leader and familiar with the automotive development life cycle. Must be able to initiatives lead, negotiate and come up with options for programs
PMP Certification preferred.

Education Level:
Bachelor's Degree
 
Job Location: Auburn Hills, MI
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 7 months
Start Date: Asap
Input Date: 05/19/2020
Last Updated: 05/19/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/23/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Tasks will include hardware development and preparations of engineering documentation, including electrical schematics utilizing CREO schematic

Experience generating electrical schematics
Experience developing electrical documentation
Power Supply and FPGA Design experience is desired but not required.
Can Start without a Clearance
 
Job Number: 48468
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 05/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Design Engineer

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.
 
Job Number: t3262
Job Location: Southern, CA
Rate: $55-$70/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/23/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Design Engineer Secret Clearance

Description:
Job Title Electrical Design Engineer Secret Clearance
Location Lexington, KY
Job Number 433/1927
Residency US Citizens Only
Clearance Interim Secret
Duration 1 Year or more
Pay Rate $35-48/hr
Per diem Yes split available
Overtime Unknown details at interview
Shifts Every other Friday off (9x80 shift)


We are hiring for an Electrical Engineer who will be working on changing and modifying existing aerospace avionics hardware, as well as integrating existing and new components into airborne or terrestrial equipment or systems.



Candidate will be working on developing military specification (SAE, ANSI, ASME) components / system designs based on requirements and interface control documents. After design work is complete, candidate will assist in supporting the fabrication, installation, and integration of the design, helping the manufacturing and installation contractors.



Required:

*3-5 years in Electrical Engineering, creating electrical designs.

*System integration experience.

*Active Interim or Secret Clearance; US Citizens only please.

*BSEE from an accredited University.



Pluses:

*Creating electrical designs of aerospace systems, wiring harnesses, components or other electrical equipment design.

*Familiar with Aircraft systems (like LRUs)



Benefits:
*Five medical plans to choose from
*Optical and dental plan offerings
*Direct deposit payroll
*Overtime paid at time and 1/2 over 40 hours
*Per diem may be available for out of town contractors
 
Job Number: 433
Job Location: Lexington, KY
Rate: $35-$48 DOE
Per Diem: yes/split
Input Date: 07/02/2020
Last Updated: 07/02/2020
Firm Name: CSS STAFFING
Attention: Tom
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Electrical Design Engineers -- Many new long term programs in Missouri

Description:
Must be degreed, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 02/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 6 or more years of relevant experience
Demonstrated knowledge of engineering principles and practices
Understanding of Computer Aided Engineering tools
Experience working in multi-disciplinary design & development teams


Preferred:

Exposure to simulations through functional and logical models and system analysis
Experience with hardware testing
Background in the Aerospace, Space and Defense Industry
Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
Experience in digital or analog circuit design and schematic capture
Understanding of the printed circuit board layout process and tools
 
Input Date: 05/21/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Oakbrook Terrace, IL
Job Title: Electrical Engineer
# of Positions: 1
Duration: 12 Months


Job Description


Required to have a bachelor's degree or equivalent experience and a minimum of 5 years engineering experience performing program and technical tasks in support of nuclear plant operations.
Responsible for preparing and revising engineering documents with minimal supervision.
Updates engineering data and notes.
Incorporates review comments and walk down data into associated engineering products, databases and programs.
Supports engineering work functions in support of applicable safety analyses, industry codes, and regulatory requirements.
Manages the development, implementation, and evaluation of complex designs, product construction and testing.
Typically reports to a head of a unit/department.

Position Requirements:
Ability to read Project Diagrams
Solid knowledge of the distribution system
Preferred if prior experience working on the Client system
Understanding of voltage optimization technology
Ability to perform trending and data analytics on the VO data and provide diagnostic solutions and improvements
Experience with OSI application preferred



As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
 
Job Number: 20-05819
Job Location: Oakbrook Terrace,, IL
Per Diem: Split
Input Date: 05/20/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Job ID # 2020-11279

Contract Opportunity

Location: Baltimore, MD

Industry: Aerospace & Defense

Minimum Experience: 9 Years

 

What You’ll Do:

Research, develop, design, and test electrical components, equipment, systems, and networks.
Design electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Design and Review electrical equipment, facilities, components, products, and systems for US Navy purposes.
Perform Electrical Analysis on Ship Systems (Fault Current Analysis, Harmonics Analysis, Electrical Stability Load Shedding Analysis, Electrical Plant
Load Analysis” (EPLA) &Power One Line (POL) Review and Analysis.
Review Designs IAW applied electrical standards, specifically IEEE 141, IEEE 45, MIL-STD-1399, MIL-S-16036
Review and Drive Design of Navy Ship Power Distribution System including power generation (generator sizing) and distribution,
Emergency power system design, Protection and verification (fault current calculations, breaker sizing), Shipboard cable application (IEEE 45, IEEE 1143), Grounding, bonding, insulation testing and, Shore power systems, UPS sizing and loading and AC/DC power and conversion.
Review and Drive Design of Lighting Systems and Overall Electrical Safety.
 

What You’ll Need:

Technical Skills:
Electrical Standards
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

9 Years of Experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11279
Job Location: Baltimore, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
****Candidates must be U.S. Citizens without Dual Citizenship****

Duties:
1. Our client is looking for an Electrical Engineer who will be supporting integration and testing of electronic hardware.
2. The successful candidate will be tasked with supporting troubleshooting, acceptance testing, and qualification testing of electronic circuits and systems used in an aerospace/defense application as well as troubleshooting of electronics and electronics systems.
3. This is a hands-on position for individuals with demonstrated analytical, test and troubleshooting skills.
4. Must have significant experience with implementation and use of all standard test equipment including but not limited to digital multimeters (DMM), ammeters/probes, oscilloscopes, lab power supplies, chart recorders, signal and function generators, Hi-Pot tester.

Working under general supervision:
60% - Troubleshooting and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
20% - Support acceptance and qualification testing of electronic boxes used in an aerospace/defense application.
10% - Reviews and generates analysis and tests of electrical/electronic components, sub-systems and systems.
10% - Work with the program technical leads, production operations, quality assurance, customer and the customer’s representatives to ensure that the hardware meets all requirements.

Skills:
Requirements:
1. Must have an understanding of electrical engineering fundamentals of both analog and digital electronics.
2. Must have experience with integration, and test of military electronic systems.
3. Ability to document efforts, write test procedures and reports and contribute to completion of milestones within specific projects.
4. Must be detail-oriented.
5. Must be familiar with Microsoft Office applications.
6. Good written and oral communication skills to be able to convey design ideas in a clear and concise manner.
7. This position may require occasional extra work hours as required to meet critical schedule milestones.
8. Significant travel is not expected.

Desired:
1. Experience with MIL-STD-461E.
2. RF circuits and systems troubleshooting.
3. Experience with RF test equipment including spectrum analyzer and network analyzers.
4. Experience with DIT-MCO test equipment.
5. Experience with National Instruments PXI test systems.
6. Experience integrating embedded systems.

Education:
1. Requires a BS degree in Electrical Engineering (or related discipline) and at least 5 years of related experience (or equivalent combination of education and experience).
 
Job Number: 12431
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/28/2020
Last Updated: 06/11/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Powertrain & Electronics

Description:
Seeking a talented electrical engineer to join our team designing all-electric aircraft. This engineer will work closely with mechanical, software, and other cross-functional teams. You'll be taking ownership of key electrical subsystems and printed-circuit-boards from design through prototyping and to product. This is a hands-on position. Optimizing designs for reliability, weight, and efficiency will be a focus.

Responsibilities:
• Create clear and readable schematics for digital and mixed-signal printed-circuit-boards
• Component selection for minimum mass and maximum reliability
• Investigate modern technologies for power and data transmission/management
• Work with PCB designers to create reliable and low-weight layouts
• Write requirements, participate in DFMEAs + create and carry out test and validation plans

Required:
• Strong EE fundamentals, including familiarity with:
• Power conversion (linear and switching regulators)
• High-speed digital design and layout
• Signal conditioning and conversion (ADCs, filters)
• Discrete semiconductor design (FETs, BJTs, Diodes)
• Schematic capture and PCB design
• Experience with component selection
• Hands-on experience with building and debugging hardware
• Great communication skills
• B.S. in electrical engineering or related discipline

Desired Experience:
• M.S./Ph.D. in relevant discipline
• 2+ years of working experience in relevant industry
• Familiarity with Altium Designer
• High voltage electrical design (400V+)
• Exposure to regulatory certification
• Design-for-reliability, including use of DFMEA and fault trees
• Designing for high EMI environments



The Structures Company is an AA/EOE.
 
Job Number: 381
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 04/22/2020
Last Updated: 06/23/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Wire Harness

Description:
Secret: Interim clearance is acceptable to start



Primary focus on electrical wiring and harness assembly diagram design and development.



Duties include:

Create wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems
Validate/interpret/troubleshoot and resolve any wiring related issues
Perform technical checks to ensure wiring document correctness
Provide engineering sign-off on all new/revised manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches).
Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to specifications.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.


Please send resumes to Becky at bnorman@butler.com.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57593
Job Location: Lexington, KY
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: June 2020
Input Date: 05/19/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication
 
Job Location: South
Input Date: 07/15/2019
Firm Name: PDS TECHNICAL SERVICES
Email: epetersen@pdstech.com
Website: www.pdstech.com

Electrical Engineer III ( Chandler, AZ ) 9899904

Description:
Electrical Engineer III ( Chandler, AZ ) 9899904
12 Month Contract

Pay rate: Open

Note: Active Secret Clearance Required

Experience in one or more of the following areas:
a) Ionizing radiation effects analysis & test for electronics systems
b) material science with emphasis on x-ray interactions with matter
c) electromagnetic effects (cable coupling, transient prediction/mitigation) from radiation (ionizing and non-ionizing radiation). Should be familiar with computational tools for modeling and prediction of effects.

Preferred Qualifications:
Preferred advanced degree (MS minimum) in physics, electrical engineering, material science, or mechanical engineering. Active Secret Security clearance or Top Secret is highly preferred

High dose rate (radiation) analysis and test (MIL-STD-883), computational FTDT methods, electromagnetic testing (MIL-STD-464/MIL-STD-461), familiarity with nuclear weapon effects, experience in testing/analysis of natural space radiation environment (TID; MIL-STD-883, SEE; JESD57/ASTM F1192), EEE part selection for aerospace systems, x-ray/gamma/beta/ion transport analysis.
 
Job Number: 9899904
Job Location: Chandler, AZ
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/07/2020
Last Updated: 06/25/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Matlab/Simulink w/Secret Clearance

Description:
*This is a full time, starting as a remote position (reporting to Marion MA in June or July subject to COVID guidelines at that time)*



We are seeking an Electrical Engineer who has specific background in radio (military) receivers. Candidate will be working to develop and debug filters (FIR or IIR) using Matlab or Simulink. Candidate will also be using HDL Coder, VHDL, DSP and Xilinx Vivaldo.



Required:
*6 years’ experience in Electrical Engineering work for DoD projects involving software debugging and development using Matlab and Simulink.
*Specific experience with FIR and IIR filters, HDL Coders, DSP filters, VHDL
*Experience using System Verilog and Xilinx Zynq 7000, Xilinx Vivado
*Active Interim or Secret clearance; US Citizens only please.
*Engineering Degree, preferably a BSEE.



Pluses
*Knowledge of Xilinx AXI VIP
 
Job Number: 228
Job Location: Marion, MA
Rate: $65-$85 DOE
Per Diem: yes/split
Input Date: 05/01/2020
Last Updated: 06/05/2020
Firm Name: CSS STAFFING
Attention: Tom
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Power Systems Design

Description:
Seeking a Mid-Level Electrical Engineer – Power Systems Designs to be part of the team responsible for the design, development, production, integration and life cycle support of power systems for embedded system electronics to include products used aboard Navy submarines, ships, and aircraft. This group designs, develops, demonstrates, produces, assembles, tests and delivers torpedo SONAR arrays and electronic assemblies.

Electrical Engineering (Mid-Level) - Power Systems Designs Duties:

Design, simulate and implement power solutions for embedded system electronics
Perform component and architecture trade studies to determine optimal system solutions
Document and present trade studies, analyses, test results, status, etc. to the team
Generate design and interface documentation
Integrate, test, troubleshoot, and verify hardware
Develop test criteria and assist in the design of test systems including test software applications
Develop technical presentations, recommendations, and written communications to explain technical issues to program management and the Navy customer team.
Electrical Engineering (Mid-Level) - Power Systems Designs Requirements:

Possess technical acumen, an educational background and expertise in AC-DC and DC-DC power systems design, development and troubleshooting:
Requires strong documentation and writing skills; to include strong written and oral communication skills
Be able to rapidly adapt to handling electronic system technical issues found in system integration labs, field environments and during production
Consistently develop knowledge/expertise across the various tactical baselines and platforms.
Knowledge of systems and electronics troubleshooting skills.
Electrical Engineering (Mid-Level) - Power Systems Designs Education:

B.S. (or higher) degree in Electrical Engineering or related technical field
2-5 years of engineering experience required


This position requires the applicant to obtain and maintain a DoD Clearance.
 
Job Number: 8562
Job Location: Pittsburgh, PA
Rate: Open
Per Diem: Possible
Overtime: Unknown
Duration: LT
Start Date: ASAP
Input Date: 06/11/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Nichole Andrews
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Schematic Design Engineer

Description:
Job Title Electrical Schematic Design Engineer
Location Scranton, PA
Job Number 824/02615
Residency US Citizens Only
Clearance Clearance Apply for after start
Duration 1 Year or more
Pay Rate $55/hr
Per diem Yes split available
Overtime Yes ask for details at interview
Shifts Monday-Thursday 4x40


We are hiring for an Electrical Design Engineer who will be working on a DoD aerospace project creating schematics for military power supplies. The project involves working in a secured area of the plant, handling hardware development and then creating corresponding documentation, mainly schematics for the power supplies.



Required:
*8 years’ experience in electrical engineering working with analog/digital circuit designing
*Good Schematics development experience

*Able to apply and gain a Secret Clearance upon starting; US Citizens only please.
*BSEE



Pluses:

*Creo Schematics highly preferred
*Experience designing power supplies
*Experience with FPGAs



Benefits:
*Five medical plans to choose from
*Optical and dental plan offerings
*Direct deposit payroll
*Overtime paid at time and 1/2 over 40 hours
*Per diem may be available for out of town contractors
 
Job Number: 824
Job Location: Scranton, PA
Rate: $55
Per Diem: yes/split
Input Date: 05/15/2020
Last Updated: 05/27/2020
Firm Name: CSS STAFFING
Attention: Tom
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electrical Systems Engineer

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical systems through all phases of a project, including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Support of production, in-service and flight test activities
• Preparation and presentation of technical data in design reviews
• Preparation and presentation of change requests
• Review and approval of Qualification Test Plans, Procedures and Reports
• Provide support as required in the maintenance and update of the Electrical Test Laboratory
• Provide support as required in other areas of the Electrical Systems group, including cockpit controls and exterior/interior lighting
Qualifications

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical Engineering from an accredited four year college or university program
• 8 years directly related experience involving design, development and certification of aircraft electrical power systems

Knowledge, Skills and Abilities:
• Knowledge of FAR Part 23 or 25 regulations
• Knowledge of advanced electrical power distribution systems preferred
• Knowledge of aircraft communication busses
• Knowledge of RTCA/DO-160, RTCA/DO-178B and RTCA/DO-254 processes
• Knowledge of aircraft wiring practices
Knowledge of aircraft bonding and grounding practices
Knowledge of system modeling tools preferred

The Structures Company is an AA/EOE.
 
Job Number: 372
Job Location: CA
Rate: $65+/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 03/10/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Electrical Technician

Job ID # 2020-11305

Contract Opportunity

Location: Lexington Park, MD

Industry: Aerospace & Defense

Minimum Experience:  5 Years

 

What You’ll Do:

Support R&D and production efforts in support of the Presidential Helicopter Avionics development contract.
Support other programs at the Patuxent Engineering Facility as required.
Circuit card assembly section of the Patuxent Engineering Facility.
Fabrication of circuit board assemblies using both surface mount and through hole components.
Circuit board repair as needed including de-soldering.
 What You’ll Need:

Desired Skills:
IPC / J-STD-001 Solder Certified.
Experience working with QA personnel.
Familiarity with Shop travelers and production procedures and processes.
Areas of expertise:
Fabrication
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

5 Years of Experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11305
Job Location: Lexington Park, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 06/29/2020
Last Updated: 06/29/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Test Engineer

Description:
 PDS Tech, Inc. is seeking an Electrical Test Engineer, in Windsor Locks, CT.

Summary:

  • Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
  • Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
  • This can involve testing, data analysis, and interface with all aspects of the engineering department.
  • Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
  • Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:

  • Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.
  • Experience with advanced instrumentation and data acquisition systems is required.
  • Knowledge of LabVIEW desired.
  • Experience should include working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated.
  • Excellent communication skills, written and verbal are required.
  • Ability to proficiently operate common Microsoft Office software products is required.


 
Prerequisites:
  • Will accept someone with 2+ years experience up to and including 25+ years experience.

Education:

  • Bachelors

 
Job Number: 2010112063
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 02/17/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fl9EQAQ&URLSource=cjhunter

Electrical Test Engineer - Contract OHIO

Description:
Analysis
Conduct failure analysis with minimal oversight Perform analysis of products to show compliance to derating guidelines and manufacturers'
specifications. Various CAD/CAE tools may be used for this.

Computer Skills
Basic proficiency with Microsoft Office (Word, Outlook, Excel, PowerPoint) Operate computer-assisted engineering and design software and equipment to perform basic engineering tasks.
Design

Investigate and test vendors' components, perform design selection Modify existing designs for new applications Create documentation of design / product with minimal oversight – drawings, specifications, compliance matrices, test plans and test reports
 
Job Number: 12680
Job Location: Cincinnati, OH
Rate: 40/45 hr.
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 05/14/2020
Last Updated: 07/02/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Electrician

Description:
PDS Tech is seeking an Electrician in Salt Lake City, UT

Duties:
Maintain and repair equipment in Titanium sponge plant.
Work safely and obey safety standards, participate in safety observation program.
Follow daily maintenance schedule.
Plan out electrical jobs and get information on parts.
Perform preventative maintenance on plant equipment and instrumentation. 
Troubleshoot Electrical equipment, PLC’s, valves and solenoids and other equipment as needed.
Install new electrical equipment as needed.
Assist maintenance mechanic with maintenance task and life critical permits.
Possible On call during evening hours for emergency repairs.
 


Requires a high school diploma or its equivalent with 2-4 years of experience in the field or in a related area. May have to complete an apprenticeship and/or formal training in area of specialty. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
 
Job Number: 2010111324
Job Location: Salt Lake City, UT
Duration: 3 months
Input Date: 01/24/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fhRVQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Packaging Design Engineer

Description:
Duties:
1. Responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets).
Skills:
Required:
1. Creo cable routing/design and documentation expertise.
2. Thorough knowledge of airborne cable/harness mil spec design requirements, materials, components, manufacturing techniques, production support, test support, and integration support.
3. High proficiency in understanding electrical Schematics.
4. Expertise in PCB/CCA design.
5. Ability to flourish in a fast-paced, multi-tasking environment involving continual proactive communication with design engineering peers, IPT Leads, functional managers, Process Engineers, Configuration Management, Production Control personnel, Schedulers and others.

Desired:
1. Strong organizational skills, including the ability to multi-task and prioritize.
2. Exemplary written and oral communication skills.
3. Commitment to timely task completion and a high standard of excellence.
4. Possess poise and the ability to interact with people in a professional manner.
5. Demonstrates critical thinking and innovative, effective problem-solving skills.
6. Inquisitive and detail-oriented with strong analytical skills.

Education:
1. Associates Degree required.
2. Bachelor’s Degree preferred.
3. 7+ years of experience.
 
Job Number: 12436
Job Location: Orlando, FL
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/23/2020
Last Updated: 06/09/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/24/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

In your role, you will:
  • Assemble fabricated aircraft parts at floor stations.
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
Qualifications:
  • Fine pitch soldering experience is required. (watch maker certifications)
  • 4 years experience in electronics assembly.
  • High School Diploma required.
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
 
 
Job Number: 1810083538
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 12/04/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
This position involves architecture and implementation of the embedded software at the heart aircraft. The engineer will play a key role in a small, fast-moving team and have input to conceptual system design and implementation of embedded software for control of electric-powered, fly-by-wire aircraft.

Required
• University degree in electrical engineering, computer science, computer engineering, mechatronics, physics, mathematics, or similar field; or, a very strong portfolio of designed and implemented embedded software.
• Master's degree or Ph.D. preferred.
• Expert knowledge of object-oriented programming methodology and multi-layered system architectures.
• Expert knowledge of C++.
• Knowledge of and experience with real-time operating systems.
• Knowledge of and experience with communication protocols including I2C, CAN, SPI, UART, etc.
• Strong understanding of modern micro-controller and microprocessor architectures such as ARM Cortex-M0/M3/M4/A8/A9.
• Understanding of hardware from an embedded software engineer's perspective.
• Experience with modern integrated development environments and debuggers.
• Hands-on experience with test and measurement equipment such as oscilloscopes, logic analyzers, protocol analyzers, voltmeters, etc.


The Structures Company is an AA/EOE.
 
Job Number: 387
Job Location: Northern CA
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 04/11/2020
Last Updated: 06/23/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Embedded Software Engineer

Description:
Chipton-Ross is seeking an Embedded Software Engineer for an opening in Camden, NJ.

RESPONSIBILITIES:
Reporting to the Software Engineering Manager, the Embedded Cyber Software Engineer plays a key role in developing innovative software components.
Apply computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target hardware
Work closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system
Support and participate in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and formal test
Develop software test plans and procedures, and other relevant technical documentation
Utilize modeling tools and equipment to establish operating data, conduct experimental tests, prototype, and evaluate results
Participate in peer reviews, identify, track and repair defects
Utilize a variety of software languages (i.e., C++, C, Java, Python, Assembly) on Windows, Linux, mobile platforms, and embedded real time operating systems (VxWorks, Linux, Integrity, and others for Motorola, Intel, TI, and custom processor designs)

REQUIRED EXPERIENCE:
Object-oriented design and implementation experience, with exposure to software modeling and UML
Experience developing device drivers and Board Support Packages for real time embedded systems
Experience with cryptography and cryptographic applications, security architecture, multi-level and cross domain security solutions, and certification requirements
Hardware / Software Integration experience
Experience debugging real time embedded applications
Experience with static analysis, code coverage tools, and automated test frameworks
Knowledge of network architectures and protocols
Related coursework or experience developing software for embedded applications
Excellent oral and written communication skills

EDUCATION:
Accredited Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 185370
Job Location: Camden, NJ
Rate: $DOE
Duration: 8 Months
Input Date: 03/19/2020
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

Engineering Tech

Description:
PDS Tech is currently recruiting for an Engineering Tech for a client of ours in Hollister, CA.  Please send your resume to pzack@pdstech.com for consideration.  
 
  • Under manager supervision, build, test, debug, and repair development hardware per engineering drafted work instructions
  • Provide design and process improvement feedback to engineers.
  • Able to work with minimal direction
  • Fabricate test samples to perform various mechanical, ballistic, electrical and chemical tests to support development programs per engineering drafted work instructions.
  • Knowledgeable in basic inspection and hand tools
  • Interpret drawings and instructions
  • Requires travel up to 20% of the time
  • Soldering experience including use of heat guns for shrink tubing operations a plus.
  • Leverages other factory resources and personnel to get work done for the team
  • Must be willing and able to obtain a security clearance
  • Perform other related duties as assigned
  • Ability to train other associates as needed.
  • Section inert welded parts a plus.
  • Ability to perform basic machining functions (no energetic parts). 
  • Oversees build and testing process flow of development hardware.      

  • Education Required:          High school diploma or equivalent.  Technical training and job related certifications preferably in special processes.
  • Experience Required:        3-5+ years directly related experience in a manufacturing and/or engineering proto type environment.

 
Job Number: 1910107309
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/26/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMSlQAM&URLSource=cjhunter

F7 Ground Test and Aircraft Instrumentation Technician

Description:
PDS Tech is seeking an F7 Ground Test and Aircraft Instrumentation Technician in Stratford CT.
 
The ideal candidate will work from Engineering Requests, Procedures and Drawings with limited guidance to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

This position requires:

  • planning, building and terminating the various cable harnesses required in the Instrumentation System.
  • Assisting in performing System and Sensor Calibrations.

The working environment consists of the Structural Test Lab, Remote Test Stands (Engineering & Quality Assurance) as well as Offsite support to include Aircraft Instrumentation.

This position requires a good working knowledge of Instrumentation Sensors, Slip Rings and Data Acquisition Systems.

Must possess:

  • A strong Mechanical and Electrical background and familiarity with Strain Gauges and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
  • Ability to perform Strain Gauge installations (preferred)
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.

 
Job Number: 2010111535
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 03/11/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fiuZQAQ&URLSource=cjhunter

Fabrication Supervisor-2nd Shift

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.

Requirements:
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing  of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following area: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.
  6. Skills and Abilities Required:
  7. Strong problem solving, analytical, and technical skills.
  8. Strong oral and written communication skills.
  9. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  10. Experience implementing or being part of a Lean Manufacturing organizations.
  11. Demonstrated success in implementation of continuous improvement initiatives.
  12. Ability to read and interpret prints and engineering documents.
  13. Familiar with Microsoft Office (Power Point, Excel, and Word).
  14. Self-motivated with ability to foster moral amongst his/her team.

 
Job Number: 2010113297
Job Location: Clintonville, WI
Duration: 0 months
Input Date: 03/24/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr0eQAA&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in St Rose, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the New Orleans area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 2010114059
Job Location: Metairie, LA
Duration: 8 months
Input Date: 04/24/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OouZQAS&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Little Rock, AR

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 2010114019
Job Location: Little Rock, AR
Duration: 6 months
Input Date: 04/20/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OonXQAS&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in New Orleans, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the New Orleans area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 2010111995
Job Location: New Orleans, LA
Duration: 8 months
Input Date: 03/03/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fkwyQAA&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in New Orleans, LA

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 2010112665
Job Location: New Orleans, LA
Duration: 6 months
Input Date: 02/21/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002foNHQAY&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Metairie, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 1910104858
Job Location: Metairie, LA
Duration: 18 months
Input Date: 07/25/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUzxQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
The Systems Engineer, Flight Controls will be responsible for some or all systems related to:
• System 22 – Automatic Flight
• System 27 – Flight Controls
• System 76 – Engine Controls
• System 86 – Lift Systems

Responsibilities
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements.
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities.
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects.
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements.
• Generate, review, and approve:
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required.

Required
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications.
• Previous experience with aircraft systems.
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A.
• Working knowledge of DO-160G environmental qualification.
• Excellent problem solving, communication, and technical writing skills.
• Basic knowledge of FAA regulations and guidance material and industry standards.
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred.
• Proficient in English.
• Proficient with Microsoft Office and Google Docs.

Desired
• Working knowledge of electro-mechanical equipment design, including software.
• Previous experience managing complex sets of requirements.
• Previous experience preparing and presenting design reviews for complex, highly integrated systems.
• Previous experience defining system controls, crew indications, and flight manual procedures.
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results.
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred.
• Experience and involvement with industry groups to develop consensus standards.
• 5+ years of relevant industry experience.
• Private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 377
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 06/01/2020
Last Updated: 06/23/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 12/11/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

InProcess Inspector

Description:
PDS Tech is currently seeking InProcess Inspectors for Hollister, CA
 

Description:  


This position requires the ability to perform limited visual, mechanical and electrical inspection functions in manufacturing areas under minimum supervision.  The individual must be dedicated to the quality function and a drive to enhance the quality of both the product and processes. 
 
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a lower level technical nature with record keeping as a major part of the duties.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a "go/no-go" nature.
  • Interpret basic drawings and instructions.
  • Uses a variety of precision measuring instruments.
  • Other functions that may be assigned.

 
  • High School Diploma,  college-level business courses a plus
  • Knowledge in the use of basic mechanical measuring tools
  • Ability to interpret basic drawings and instructions
  • Basic computer skills, MS Office knowledge
  • Good problem solving skills
  • Good written, verbal, mathematical and analytical skills
  • United States Citizen  

 
Job Number: 1810088645
Job Location: Hollister, CA
Duration: 3 months
Input Date: 10/30/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mci4AAA&URLSource=cjhunter

Industrial Electrician

Description:
Job Overview:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blueprints.
 
ROLE AND RESPONSIBILITIES:
Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items
Working with Panel boards, Transformers and Distribution equipment
Work required of applicant mirrors a Commercial/Industrial Construction Electrician
Perform various other duties as required by the company
Exhibit ability to prioritize and plan work activities, manage time efficiently and meet objectives to complete projects
Demonstrate team-work by working well with others, offering assistance, responding positively to constructive feedback
Follow safe manufacturing and material handling practices
Other job duties as assigned per the needs of the Shop and the Company
 
QUALIFICATIONS AND EDUCATION REQUIREMENTS:
High school diploma or equivalent (GED) required
Applicants need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills
Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Master license a plus
State journeymen or Master license a plus
2-3 years of experience in commercial/industrial work preferred
Medium voltage and electronics experience a plus
 
PREFERRED SKILLS:
Ideal candidate will have some experience with fabrication or machining
Able to read and interpret drawings
Good references with excellent work attendance and attitude
 
 
Job Number: 2010114292
Job Location: De Pere, WI
Duration: 6 months
Input Date: 04/30/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OpoUQAS&URLSource=cjhunter

Inspector

Description:
PDS Tech, Inc. is seeking a  Inspector, in Mountainhome, PA.
JOB DUTIES :
  • Participates in cross-functional efforts to ensure proper corrective actions are implemented in a timely manner.
  • Maintains quality data records, compiles information, and prepares reports for internal and external customers.
  • Performs preliminary review and Material Review Board analysis and disposition of nonconforming material.
  • Provides support to manufacturing operations in the review of products and of engineering and manufacturing processes, including First Article inspections.
  • Performs product audits in accordance with  customer / industry standards, reports results, assigns and monitors follow-up actions.
  • Performs duties required by the Quality Management System. Maintains Inspection Stamp control for production employees.
  • Applies quality standards for receiving, in-process and final inspection in accordance with contractual requirements. Maintains equipment calibration and tooling tracking systems. Trains inspection (audit) personnel on workmanship standards. 

 

  • JOB DUTIES

    -Performs a wide variety of complex and difficult electromechanical inspections in the production/assembly process through final system assembly.

    -Follows general inspection guidelines to conduct critical non-routine visual, dimensional, mechanical, electrical test and functional inspections on a wide variety of components, assemblies, equipment, systems, supplies and materials.

    -Performs complex and critical inspection procedures requiring special set-up of new or unique equipment and interpretation of test data from a variety of sources.

    -May conduct first article inspection of parts, assemblies, equipment and tooling.

    -Performs other related duties as required.

     

EDUCATION and/or EXPERIENCE 
  • Associate’s degree (A.A.) or equivalent from two-year college or technical school preferred
  • HS Diploma/Equivalent and minimum two years related experience and/or training. 
  • Must be able to read and interpret mechanical drawings. 
  • Ability to use typical equipment, such as micrometers, vernier calipers, height gauges, dial indicators, oscilloscopes, component testers and the like.
  • Previous CMM experience would be a plus!

 
Job Number: 2010114357
Job Location: Cresco, PA
Duration: 12 months
Input Date: 05/13/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Oq98QAC&URLSource=cjhunter

Lab Test Engineer

Description:
PDS Tech is seeking an Lab Test Engineer, in Colorado Springs, CO.

Summary:

  • Manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
  • Review schematics and customer requirements for each product to assure accurate tests are being performed for each product.
  • Create detailed testing procedures for fire and gas detection products.
  • Evaluate and understand the Bill of Materials to verify all of the components are considered during testing.
  • Prioritize tasks and testing procedures to meet company and customer goals.
  • Execute validation and regression level tests.
  • Verify functional requirement on new product designs.
  • Create effective testing procedures in order to execute 200+ tests using multitasking techniques.
  • Track progress on program testing to ensure schedule goals.
  • Document product and procedure test results in an organized manner for leadership and co-workers to review.
  • Analyze defective components and product systems.
  • Conduct failure analysis, document the cause(s), and notify the team and supervisor of results.
  • Compile and report any unusual conditions or high risk results that could affect the quality or safety of the product.
  • Follow-up with engineering teams on re-designed product or products that needed technical updates or changes resulting from non-compliant test results.
  • Review, test, and validate agency requirements for each product to ensure compliance to agency standards.
  • Collaborate with the team and share ideas on process improvement.

Qualifications:
  • 4+ years of experience working as a technician or test engineer on electronic products in an engineering lab (combination of years spent in product design are also applicable).
  • Proficient using digital and analog testing equipment such as multimeters, oscilloscopes.
  • Excellent self-task management/prioritization and documentation skills in a R&D or testing lab environment.
  • Understands how to read and interpret schematics, installation sheets, and bill of materials.
  • Demonstrated analytical and problem solving skills with little to no supervision.
  • Interpersonal skills to work with several departments, including engineering and production.
  • Excellent verbal and written communication skills.
  • Experience working on failure probability models and risk mitigation plans.
  • General understanding of engineering equipment like soldering irons, hand-held power tools.
  • Expert on Microsoft Office (especially Excel and macros in Excel).
  • Ability to stand for long periods of time and lift up to 50 lbs. with or without reasonable accommodation.
  • Must be authorized to work in the U.S.A. without restrictions.

Preferred:

  • Experience with a Surface Mount Technology (SMT) a plus.
  • Knowledge of Engineering Graphical Packages.
  • Worked in the fire and gas industry with knowledge of regulatory standards such as UL268/217/521/EN54.
  • Expertise in Minitab, and/ Or LabVIEW.
  • Past experience with product design.

Educations:

  • Bachelors


  • Associate’s Degree in electrical technology, electrical test technician, or related field with 6+ years of experience. 2+ in an electrical lab test environment with remainder in product design.
  • Bachelor’s Degree in electronics engineering technology, engineering technology, or related field is preferred 2+ years of experience in an electrical lab test environment or product design.

 
Job Number: 2010111048
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 01/22/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fgGKQAY&URLSource=cjhunter

Lead Embedded Software Engineer

Description:
Chipton-Ross is seeking a Lead Embedded Software Engineer for an opening in Camden, NJ.

RESPONSIBILITIES:
Reporting to the Software Engineering Manager, the Lead Embedded Cyber Software Engineer is responsible for leading teams of embedded software developers through all phases of the software development life cycle to develop innovative software components.
Developing and tracking software development schedule, assigning tasking, managing cost accounts
Interfacing and coordinating with all engineering development disciplines, project engineering and program management
Oversee formal design and test reviews, prepare and present technical briefings, report project status
Guide team members on the application of computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target hardware
Hands-on leadership in the development and evaluation of interfaces between hardware and software, and operational performance requirements and design of the overall system
Lead and contribute to all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and formal test
Develop software test plans and procedures, and other relevant technical documentation
Utilize modeling tools and equipment to establish operating data, conduct experimental tests, prototype, and evaluate results
Participate in peer reviews, identify, track and repair defects
Utilize a variety of software languages (i.e., C++, C, Java, Python, Assembly) on Windows, Linux, mobile platforms, and embedded real time operating systems (VxWorks, Linux, Integrity, and others for Motorola, Intel, TI, and custom processor designs)

REQUIRED EXPERIENCE:
Object-oriented design and implementation experience, with exposure to software modeling and UML
Experience developing device drivers and Board Support Packages for real time embedded systems
Experience with cryptography and cryptographic applications, security architecture, multi-level and cross domain security solutions, and certification requirements
Hardware / Software Integration experience
Experience debugging real time embedded applications
Experience with static analysis, code coverage tools, and automated test frameworks
Knowledge of network architectures and protocols
Knowledge of communication and security related protocols (including but not limited to UDP, TCP, RTP, SRTP, VoIP, X.509 and SSL/TLS).
Experience developing software using processes compliant with CMMI Level 3 or above
6+ years experience developing software for embedded applications
Demonstrated ability leading small to medium sized software development teams through all phases of the software development lifecycle
Excellent oral and written communication skills

EDUCATION:
Accredited Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 185371
Job Location: Camden, NJ
Rate: $DOE
Duration: 8 Months
Input Date: 03/19/2020
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic

Description:
PDS Tech, Inc. is seeking a Maintenance Mechanic in North Charleston, NC

Responsibilities include, but are not limited to the following:

• Work extensively on maintaining rotary injection molding machines and associated equipment; make multiple mold changes, repair molds, etc.

• Generates and completes maintenance/repair tickets as assigned and ensures that the maintenance log on individual equipment is kept up to date and accurate

• Possess trouble shooting skills in standard equipment.

• Troubleshoots equipment problems and perform immediate repairs and preventative maintenance on equipment.

• Read and interpret equipment manuals and work orders to perform required maintenance and service

• Diagnose problems, replace or repair parts, test and make adjustments

• Perform regular preventative maintenance on machines, equipment and plant facilities

• Use a variety of hand held tools, meters and material handling equipment in performing duties

• Comply with safety regulations and maintain clean and orderly work areas

• Perform all other duties as assigned or needed.

• Ensures that his/her work habits adhere to the Health, Safety and Environmental policies and practices of the department and the Facility.

• Successful candidate is reliable, an independent learner and a self-starter, able to trouble shoot and do PM work, can follow trouble-shooting procedures, analytical, knows LOTO procedures, safety-minded, good people skills when dealing with machine operators of all levels of experience to determine the running status of the equipment or maintenance requirements ability to work as a team
BASIC QUALIFICATIONS:

• 3 years of maintenance experience with manufacturing or other heavy equipment, with a fundamental understanding of mechanical and electrical principles or equivalent technical degree.

• 3 Years of working experience with hand power tools.



Additional Qualifications:

• Experience with injection molding processes or equipment

• Ability to read wiring diagrams and troubleshoot electrical systems

• Ability to analyze and troubleshoot hydraulic and pneumatic circuits

• Experience or demonstrated understanding of robotics programing, calibration and operation

• Experience in the assembly and dismantling of Production/Prototype machinery

• Ability to obtain a site license to operate fork lifts.

• Experience with welding (TIG and/or stick)



PHYSICAL REQUIREMENTS:

• Ability to lift 50 pounds without difficulty

• Frequent bending, reaching, stooping, constant walking, standing, and pulling and good vision



PERSONAL PROTECTIVE EQUIPMENT:

• Eye Protection Glasses with Side Shields

• Face Shield/Splash Goggles specific to the job.

• Gloves – specific to the job required.

• Steel Toe Shoes with metatarsals protection to be worn at all times
 
Job Number: 2010113771
Job Location: North Charleston, SC
Duration: 6 months
Input Date: 04/21/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Onj9QAC&URLSource=cjhunter

Maintenance Technician

Description:
PDS is seeking candidates to fill a Maintenance Technician position in Petaluma, CA
 
  • Follow quality standards in accordance with company policy.
  • Perform preventive and predictive maintenance practices and record all data.
  • Observe mechanical equipment in operation and follow good troubleshooting practices to locate causes of trouble. Adjust functional parts of equipment and control instrumentation. Install or replace worn or faulty components for equipment performance restoration or improvement. Test equipment performance and record all data.
  • Perform daily responsibilities with urgency and a high level of accountability.
  • Demonstrate creativity and diligence in meeting daily and long term projects and performance objectives.
  • Initiate purchase orders for parts and machines.
  • Assist in training new technicians.
  • May perform other reasonable, related business duties.
  • Under general supervision, repairs and maintains machinery and equipment such as motors, pneumatic equipment, conveyor systems, production machines, and general facilities maintenance.


 

  • Education



    High school diploma or equivalent required.



    Trade certificates/diplomas or degrees preferred.



     



    Experience




  • 2-4 years of related experience and/or training, which includes experience or training in two or more of the following trades: plumbing, electrical, machine shop, or electronics/controls.


 



Knowledge, Skills, Abilities



  • Ability to read and interpret a variety documents such as safety rules, operating and maintenance
  • Communicate effectively
  • Demonstrate leadership & plan effectively
  • Skills needed HVAC knowledge
  • Electrical troubleshooting and knowledge of PLC”s
  • knowledge of electrical installation
  • AC/DC drives, hydraulics, pneumatics
  • Background in industrial, mechanical settings
  • Ability to read prints, drawings, and schematics
  • Instructions, and procedure manuals furnished in written, oral, diagram.
  • Ability to work well with minimal supervision.
  • Ability to use hand and machine shop tools. Ability to train others by technical means and by example.
  • Ability to write routine reports and correspondence.

 
Job Number: 2010114539
Job Location: Petaluma, CA
Duration: 12 months
Input Date: 05/12/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OrOOQA0&URLSource=cjhunter

Maintenance Technician

Description:
PDS Tech, Inc. is seeking a Maintenance Technician for a growing company in Nashville, TN.

SUMMARY OF THE JOB   
The primary purpose of this position is to perform electrical or mechanical troubleshooting to determine problems in non-functioning, electro-mechanical/pneumatic/hydraulic equipment used in a manufacturing process.  Performs maintenance on equipment to include welding, machine or vehicle servicing. 

 
 ESSENTIAL FUNCTIONS
1.Perform a variety of maintenance tasks on machinery and equipment. Maintain and repair trucks, forklifts and assorted hand tools.
2.Fabricate parts, assemble machinery according to layout plans, blueprints, manuals or drawings and perform electrical work as required by tasks. 
3.Interface with internal and external customers in the trouble-shooting process and in the preventive maintenance of production equipment. 
4.General building services and maintenance as required by Supervisor. 
5.Practice personal safety and follow all safety practices and procedures.  Report all unsafe activities to supervisor and/or Safety personnel.
6.Maintain a clean and organized work area.
  
ADDITIONAL FUNCTIONS
1.Comply with all policies, practices and procedures.
2.Participate in proactive team efforts to achieve departmental and company goals.
3.Participate in continuing education training courses.
4.Perform other duties as assigned.
  



 

Basic Qualifications (Required Skills/Experience):


Typical Education/Experience

  • High school graduate or GED preferred.
  • Must have ability to read electrical equipment including but not limited to programmable controls, power supplies, drives, gauges and test equipment. 


 


 
Job Number: 2010113432
Job Location: La Vergne, TN
Duration: 6 months
Input Date: 04/02/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beabout
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002rEujQAE&URLSource=cjhunter

Many New Long Term Aerospace Programs in Missouri

Description:
Stress Engineers: either metallics or composites (secret and non-secret)

Structural Designers: must be degreed and have UG NX experience

Electrical Design Engineers: must be degreed and have UG NX experience

Liaison/MRB Engineers: military or commercial background, MRB authority, degree from ABET accredited university

Tool Designers: UG NX background, aerospace or aircraft background

Aircraft Systems Engineers: systems engineers with avionics or software; DOORS or Rhapsody experience needed

Software Engineers: Ada, C++; avionics experience a plus

System Design Engineers: ECS, hydraulics and pneumatics, landing gear, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 02/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Material Handler III

Description:

The job is physical in that candidate must be able to climb stairs to get to a stockroom environment
They will work in a stockroom environment working on Kitting Electrical computer parts
Work with receiving and delivering small pieces received to distribute to the floor
Will be pulling items and delivering
Will use computer to track so must have computer familiarity
This is NOT a WAREHOUSE forklift material handler role
Basic level but requires physical fitness to handle stairs
Inventory, tracking, counting electronic pieces



 
Job Number: 1910103618
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/06/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQd8QAG&URLSource=cjhunter

Mechanical Design Engineer - Mechanisms

Description:
The Engineer will be designing mechanisms, rotor hubs, actuators, gear boxes, drive systems, etc. All of the design work will revolve around moving parts and mechanisms. This person must also have lead experience and be comfortable in a lead role.

Seeking an experienced design engineer to take ownership of structural analysis of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes rotor blade retention components, mechanical control systems, electro-mechanical actuators, transmissions, and electric motors/shafting. Define key requirements and take ownership of them through the design life-cycle.
Do: The Mechanical Design Engineer will also take the lead designing a myriad of critical components and primary structure. Areas of focus include propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include the relevant design artifacts (specifications, interface drawings, layout drawings, datum files and CAD assemblies, tolerance stack-ups, detailed drawings, etc). The ideal candidate will be highly versed in 3D CAD (Dassault 3DExperience preferred) and will also be responsible for conducting sizing of the components he or she develops. This will require working knowledge of aerospace sizing methodologies and experience running finite element models. In addition, the role will require the mechanical design engineer to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Bachelor’s degree from an accredited university in mechanical/aerospace engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one); or master’s degree from an accredited university and at least 3 years of professional experience or equivalent experience/combined education.
• Excellent mechanical aptitude and analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Highly experienced in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar and generating detailed drawings, which are in accordance with ASME Y14.5-2009 standards.
• Familiar with finite element analytical tools such as Hyper-Mesh pre-processors integrated with Optistruct or Nastran, ANSYS or similar.
• Deep knowledge of common aerospace materials and standard hardware selection is a must. Experience with light weight structures and composites is also highly advantageous.
• Experience designing critical structural components, which have been sized for static strength, stiffness, fatigue, or a combination thereof. Knowledge of kinematics is also desired.
• Experience supporting ground and flight testing of complex systems as well as running sub-scale proof of concept testing such as coupon programs or prototype test rigs.
• Versed in gear and bearing design as well as lubrication systems, and the design of common housing features such as lugs and bolted joints.
• Familiarity with component and sub-system FAA certification testing is a plus.
• Past experience as a design supervisor, or leading a team and/or mentoring others, formally or informally is an advantage.



The Structures Company is an AA/EOE.
 
Job Number: 400
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/12/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany
Website: www.thestructurescompany.com

Mechanical Drafter

Description:
PDS Tech is seeking a candidate for Mechanical Drafter position in the Atlanta, GA area. 

Summary:
  • The primary function of this position is DRAFTING.
  • Primary Role: Assist with Electrical Design of the system and knowledge of AutoCAD and the following are ideal: - Drafting Flow Diagrams - Drafting Power Drawings - Drafting Control Drawings - Drafting Elementary Drawings - Drafting System Network Drawings
  • Drafts feasibility studies and assists in projects as needed by the management team.Drafts conveyor design options using computerized drawing software (AutoCAD), computes cost estimates of design alternatives, and documents the design processes

Qualification:
  • Assists with determining proper corrective action to be taken with damaged or worn equipment based on the history of breakdowns and discussions with the operations team to determine the most cost effective solutions.
  • Assists with overseeing the protection of physical assets, facility and equipment maintenance, and facility housekeeping to ensure a safe, clean, and efficient facility.
  • Dispatches and oversees the work of outside service housekeeping vendors through physical inspections to ensure quality of work.
  • Participates in environmental audits.
  • Provides Compliance training with some supervision.
  • Bachelor’s Degree preferred     

 
Job Number: 2010112534
Job Location: Atlanta, GA
Duration: 12 months
Input Date: 02/27/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fnRcQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required.
 
Job Number: 12257
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 05/28/2020
Last Updated: 05/28/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Sub-Systems Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) is seeking full-time experienced mechanical systems engineers to support DoD aircraft platforms. The engineers will assist in the design, execution, and troubleshooting of mechanical systems and modifications on a variety of DoD aircraft platforms. These positions are located in the Jacksonville, FL area.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Develop detailed solutions for technical, operational, and maintenance problems
• Assist maintenance in troubleshooting
-the rigging of aircraft control systems
-aircraft hydraulic repairs and malfunctions
-aircraft fire detection and suppression system repairs and malfunctions
-aircraft fuel system repairs and malfunctions
-aircraft pressurization system repairs and malfunctions
• Present to management or team
• Ensure repairs are compliant with approved naval aviation maintenance policies
• Perform engineering investigations of failed aircraft components and systems
• Provide disposition for obsolete aircraft system components
• Determine criticality of aircraft system components by performing failure mode effects and criticality analysis
• Review technical publication deficiency reports and update publications where necessary
• Ensure aircraft operates properly and safely
• Draw and read blueprints and give material estimates and time required for repairs
• Determine airworthiness of aircraft
• Apply engineering principles to investigate, analyze, plan, develop, implement, test, and evaluate projects within the mechanical engineering discipline
• Review and prepare engineering and technical analyses, reports, and other technical documentation
• Up to 10% travel may be required

Required Qualifications:
• Bachelor’s degree in Aerospace, Aerodynamics, Mechanical or Electrical Engineering from an accredited college or university
• At least 3 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Familiarity with the troubleshooting and integration of test equipment, electrical/power, air conditioning, cabin pressure, hydraulics, and mechanical systems in aircraft
• Experience in reading, creating, and editing drawings in AutoCAD (or similar CAD program) and work instructions in Microsoft Office and Adobe Acrobat products
• Experience in prototyping and validating installations
• Ability to use Microsoft Office Suite (Excel, Word, Outlook, PowerPoint)
• Effective communication and interpersonal skills

Preferred Qualifications:
• 5-10 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Self-motivator capable of working through problems on own

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 513
Job Location: Orange Park, FL
Rate: DOE
Per Diem: None
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 06/08/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

Model Based Systems Engineering

Description:
PDS Tech Inc is seeking a Model Based Systems Engineer in Annapolis, MD

***Must be US Citizen***

***Active Secret Clearance required***

MBSE provides an approach and process to model the necessary system engineering products needed to align a system through its programmatic lifecycle by enabling a digital thread of data to describe a system and its environment, expected behavior, functional definition and allocation, product definition, integration and assembly, and test and evaluation.  The ideal candidate possess an engineering background combined with experience in conceptual development, system architecture and/or design, and software or mathematical modeling, as well as knowledge background in object-oriented software design methodologies and the ability to manage inputs from a set of multiple and diverse stakeholders to support understanding of system components, interfaces, and their traceability.


 
Basic Qualifications:
- Bachelor’s degree in a STEM discipline (Science, Technology, Engineering, Math) with 3 years of related professional experience or a Master's degree with at least 1 years of related experience.
- Must be able to obtain and maintain a U.S. Government Secret security clearance (U.S. citizenship is a pre-requisite).
- Familiarity with systems engineering processes and methodologies including CONOPS and use case definition, architecture definition and design, requirements development and allocation, integration and test, and verification and validation.
- Experience in Systems Modeling Language (SysML) or Unified Modeling Language (UML).
- Knowledge of software programming languages and databases and the ability to apply to software domain.
- Experience in mathematical modeling and/or object-oriented software design methodologies.

Preferred Qualifications:
- Detailed experience in systems engineering process and application of model-based concepts to system processes
- Detailed experience in architecture and system design development including definition of the functional and product baselines
- Detailed knowledge of MBSE frameworks, including UAF, DODAF, MODAF, NAF, Zachman, and TOGAF, as well as language implementations including UPDM, BPMN, SysML, and UML.
- Knowledge of general and real-time software development and testing tools, capability and usage. Real-time tool examples include cross compliers, target debuggers and test/performance instrumentation.
- Knowledge of real-time target environments, including processor and network architectures, communication protocols, simulation frameworks and electrical interfaces.
 
 
Job Number: 1910104846
Job Location: Annapolis, MD
Duration: 6 months
Input Date: 02/07/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUyGQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Navigation Systems Engineer

Description:
The Systems Engineer, Navigation will be responsible for some or all systems related to:
• System 34 – Navigation
• System 92 – Radar
• System 93 – Surveillance

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working kndge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 378
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 04/21/2020
Last Updated: 06/23/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Power Supply Design Engineer

Description:

Design and develop AC to DC and DC to DC power supplies for military applications. Must be proficient in the design principles of switchmode power conversion, feedback loop compensation, magnetic design, EMI considerations. BSEE with 5 years of design experience preferred. CAD and PCB layout experience a plus.

Magnetics Design experience required

Exp with design of 1&3 phase power transformers for military applications, including prototype, electrical, test, packaging and drafting highly desired

Here are the key points that the test is intended to identify in candidate’s experience:



  • DC DC Circuit Design
  • Magnetics Design


 



 
Job Number: 2010113696
Job Location: Sun Valley, CA
Duration: 12 months
Input Date: 04/17/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnMbQAK&URLSource=cjhunter

Power Supply Project Manager

Description:

Job Duties:   



  • The Project Manager is responsible for leading all aspects of the project activities for the projects assigned in accordance with project goals, budget, quality control and company objectives
  • Project Manager is responsible for providing project planning and management for established initiatives within a company. He/she will ensure that  projects are completed to specification, within an established time frame and budget
  • Tasked with managing projects with top-down oversight from inception to completion. 
  • Project management of  power electronics component development
  • Ensures accurate and timely project documentation, including but not limited to, RFI's submittals, schedule updates, time records, supplemental work orders, change order pricing, and general project correspondence
  • Prepare Project expense budgets, revenue and profit projections for the Division Manager.
  • Enforce compliance with all applicable laws, regulations, safety standards and contracts and report all variances to the Division Manager.


Minimum required qualifications:

  • Must be US Citizen
  • B.S or MS in Technical field from Accredited University (preferably Electrical or Mechanical)
  • minimum 5+ years of Technical project Management exp preferably withing the aerospace and Military space
  • Excellent written and verbal communication and team skills.
  • Must be PMP or MBA.
  • Ability to independently manage the operational aspects of ongoing projects and serves as liaison between project management and project team
  • Milestone development and tracking
  • Management of detailed components’ project plan  timelines
  • Tracking of component sourcing and component status
  • Experience creating and implementing new project/program management processes
  • Experience in business process mapping or operational redesign / improvement
  • Experience working with quality management approaches, techniques, and principles to ensure quality
  • Strong cross-functional collaboration skills, relationship building skills and ability to achieve results without direct reporting relationships


 
Job Number: 2010113697
Job Location: Sun Valley, CA
Duration: 12 months
Input Date: 04/14/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnMgQAK&URLSource=cjhunter

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Product Repair/Mod Tech B

Description:
PDS Tech, Inc. is seeking a Product Repair/Modification Technician in NAS Lemoore, CA.

Summary:
  • Test and troubleshoot electronic circuitry to fault isolate and identify the malfunctioning discrete or active components (microcircuits, transistors, capacitors, resistors, etc.), with 4 or more years of related experience or an equivalent combination of education and experience.
  • Capable of performing repairs and conducting final acceptance testing on avionic equipment.
  • Capable of reading and interpreting assembly drawings and electronic schematics.
  • Experience in soldering to a high-reliability standard such as MIL-STD-2000 or J-STD-001C, and ability to inspect own work for compliance to quality standards.
  • Experience in operating electronic test equipment such as oscilloscopes, multi-meters, frequency counters, spectrum analyzers, etc.
  • Experience using various hand tools to (dis)assemble avionic equipment.
  • Capable of organizing and prioritizing workload.
  • Capable of using Windows-based computers.
  • Ability to travel to both domestic and international locations (on short notice).
  • Ability to obtain a DoD Secret Clearance and access to the Lemoore Naval Air Station is required.
  • Good verbal and written communication skills.
  • Disassembles systems components to support the correction of failures or implement changes.
  • Performs routine troubleshooting of pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
  • Performs validation/verification testing of systems and components.
  • Inspects component before installation or usage to verify cleanliness and serviceability of components.
  • Fabricates and modifies aerospace products according to specifications.
  • Performs tasks associated with the safe handling of a aerospace vehicle (e.g. jacking, towing, system operations).
  • Works under general supervision.

Prerequisites:
  • High school diploma or GED and typically 3 or more years’ related experience or an equivalent combination of education and experience.

 
Job Number: 2010111948
Job Location: Lemoore, CA
Duration: 12 months
Input Date: 04/17/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fksDQAQ&URLSource=cjhunter

Product Repair/Mod Tech C

Description:
PDS Tech, Inc. is seeking a Product Repair/Mod Tech C, in Klamath Falls, OR

Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).
 
Job Number: 2010114075
Job Location: Klamath Falls, OR
Duration: 12 months
Input Date: 04/30/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OowQQAS&URLSource=cjhunter

Product Repair/Mod Tech C

Description:
Chipton-Ross is seeking 8 Product Repair/Mod Technician C located at Mountain Home AFB, ID

RESPONSIBILITIES:
Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of an aerospace vehicle. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform
Proficient in wire routing and termination on a variety of connectors.

PREFERRED EXPERIENCE:
F-15 experienced preferred.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/Accredited GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

ADDITIONAL REQUIREMENTS:
Individuals must possess their own personal standard tools and possess personal safety shoes compliant with ANSI standards.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 184323
Job Location: Mountain Home AFB, ID
Rate: $DOE
Duration: 12 Months
Input Date: 01/24/2020
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Product Repair/Mod Technician B

Description:
Chipton-Ross is seeking 4 Product Repair/Mod Technician B's at NAS Lemoore, CA.

RESPONSIBILITIES:
Personnel perform repairs and final acceptance testing on avionics and test equipment to include the replacement of electronic discrete and active components (microcircuits, transistors, capacitors, resistors, etc.). Specifically required to functionally test avionics and test equipment to determine operational condition, perform fault isolation and troubleshooting of faulty avionic electronic circuits, install replacement parts using high-reliability soldering techniques, and utilize hand tools to (dis)assemble avionic assemblies. Applicant must be capable of reading and interpreting assembly drawings and electronic schematics, which are utilized in the testing and repair effort, and must be capable of inspecting their own work for compliance to quality standards. Ability to travel to both domestic and international locations (on short notice). Disassembles systems components to support the correction of failures or implement changes. Performs routine troubleshooting of pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of a aerospace vehicle (e.g. jacking, towing, system operations). Test, troubleshoot, and fault isolate avionic systems down to the faulty electronic components using:
Electronic circuit schematics
Commercial test equipment
Specialized test equipment
Technicians knowledge of electronics and their ability to troubleshoot

Replace electronic components using high-reliability soldering techniques. Verify quality requirements are met. Re-test to ensure the operational acceptance of the avionics before delivering to our customer.

Works under general supervision.

EDUCATION:
High school diploma or GED and typically 4 or more years related experience or an equivalent combination of education and experience.

FULL TIME/1ST SHIFT
WORK HOURS: 5:30 AM - 2:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 184715
Job Location: NAS Lemoore, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/13/2020
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Product Repair/Mod Technician C

Description:
Chipton-Ross is seeking 4 Product Repair/Mod Technician C's for an opportunity in Klamath Falls, OR.

RESPONSIBILITIES:
Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/Accredited GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

TRAVEL: Candidate may be asked to travel to other locations.

FULL TIME/FIRST SHIFT
WORK HOURS: 5:30 AM - 4:00 PM
Individual must be willing to work nights and overtime as required

ADDITIONAL REQUIREMENTS:
Individuals must possess their own personal standard tools and possess personal safety shoes compliant with ANSI standards.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 185686
Job Location: Klamath Falls, OR
Rate: $DOE
Duration: 12 Months
Input Date: 04/29/2020
Last Updated: 07/03/2020
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11273

Contract Opportunity

Location: New Orleans, LA

Industry: Aerospace & Defense

Clearance Requirement: Secret Clearance

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
 

What You’ll Need:

Secret Clearance
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma/GED combined with 4 + years of relevant work experience; or Associate’s Degree combined with 2 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11273
Job Location: New Orleans, LA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 11 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11295

Contract Opportunity

Location: Lemoore, CA

Industry: Aerospace & Defense

Clearance Requirement: Interim Secret Clearance

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble, and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly, or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
 

What You’ll Need:

Interim Secret Clearance
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma/GED combined with 4 + years of relevant experience; or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11295
Job Location: NAS Lemoore, CA
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11274

Contract Opportunity

Location: New Orleans, LA

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
 

What You’ll Need:

Ability to Obtain Secret Clearance
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma/GED combined with 4 + years of relevant experience; or equivalent combination of education and experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11274
Job Location: New Orleans, LA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 11 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:
Product Repair/Mod Tech C

Job ID # 2020-10710

Contract Opportunity

Location:  Mountain Home AFB, ID

Industry: Aerospace & Defense

Minimum Clearance: Interim Secret

Minimum Education: High School Diploma / GED

Minimum Experience: 4+ years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversees assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
Inspect component before installation or usage to verify cleanliness and serviceability of components.
Fabricate and modify aerospace products according to specifications.
Perform tasks associated with the safe handling of an aerospace vehicle.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
 

What You’ll Need:

Interim Secret Security Clearance is required.
F-15 experienced preferred
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform
Proficient in wire routing and termination on a variety of connectors.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma / GED combined with 4+ years of relevant work experience; or Vocational School / Associates combined with 2+ years of relevant work experience; or Bachelor’s degree.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-10710
Job Location: Mountain Home AFB, ID
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician

Description:
Production Test Technician

Job ID # 2020-11298

Contract Opportunity

Location: Ventura, CA

Industry: Aerospace & Defense

Minimum Education: High School Diploma

Minimum Experience: 4 Years

 

What You’ll Do:

Set up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.
Adjust and calibrate systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Correct malfunctions by making adjustments or replacing parts or components as directed.
Use hand and small power tools, and various measuring and testing devices in performing job duties.
Determine types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assist engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.
Some climbing on ladders may be required as well as lifting up to 25lbs.
These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings and experience with circuit cards, power supplies, wire wrapping and LRU's.
 

What You’ll Need:

Candidate must be capable of working independently, discussing technical issues with team members, customers and working with vendors.
An AA in Electrical or Electronics Engineering is highly preferred.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma/GED combined with 4 + years of relevant experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11298
Job Location: Ventura, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician

Description:
Production Test Technician

Location: Ventura, CA
Duration: 12-13 Months

Description:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.
Some climbing on ladders may be required as well as lifting up to 25lbs.
These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings and experience with circuit cards, power supplies, wire wrapping and LRU's.
Candidate must be capable of working independently, discussing technical issues with team members, customers and working with vendors.
An AA in Electrical or Electronics Engineering is highly preferred.
BS Degree is NOT required for this position. HS Diploma is Required.

Comments for Suppliers:
An AA in Electrical or Electronics Engineering is highly preferred.
BS Degree is NOT required for this position. HS Diploma is Required.


Level 2: BS+4-8 YRS or MS+2-6 YRS

Skills:
Category Name Required Importance Experience
Areas of Expertise Electrical No 1 2 - 4 Years
Areas of Expertise Electrical Troubleshooting No 1 2 - 4 Years
Technical Skills Electrical Diagnosis/Repair No 1 2 - 4 Years
Technical Skills Electrical Standards No 1 2 - 4 Years
Technical Skills Electrical Testing No 1 2 - 4 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts No 1 2 - 4 Years
Technical Skills Knowledge of Electrical Technology No 1 2 - 4 Years
 
Job Number: 20-05677
Job Location: Ventura, CA
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 6/1/2020
Input Date: 05/15/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Project Engineer

Description:
This position is responsible to conduct and perform engineering research and development work on assigned projects, either individually or as a team participant.  This is an exempt position that may require in excess of a 40-hour week in order to effectively carry out the listed job duties.  Occasional travel required.
ESSENTIAL DUTIES:
Responsible to lead new projects with support from engineers, design engineers and technicians, with minimal supervision. 
Analyzes and interprets engineering concepts and specifications for development projects.  Plans and organizes research procedures. 
Responsible for the application of sound and accepted engineering principles, extent and adequacy of exploratory research and techniques, and the basic designs, construction and testing of pilot models.  Work is subject to regular review and minimal supervision.
Offers technical advice and assistance to engineers, designers and technicians assigned to the projects.  Works with design group and Project Manager to modify designs as needed.  Works with Operations Department and Technical Services in troubleshooting problems.
Maintains records related to materials specifications, research procedures, development techniques, designs, product performance, test data, time, etc. 
Keeps well informed of new developments in engineering blown film technology and/or compressor industry.  Continually develops process knowledge.  Occasionally visits customer sites.
Maintains thorough knowledge of applicable industry, national, and international standards, regulations and laws regarding safety and standard design practices.
Responsible for reports to management as required.
Assists sales, customer service and manufacturing departments in technical matters when needed; periodic travel as required.
Seeks, evaluates and conducts negotiations with vendors regarding machinery components and integrated equipment.
QUALIFICATIONS REQUIRED
A Bachelor’s Degree in mechanical or electrical engineering, and six years of experience in the engineer-to-order machinery industry (i.e. converting, printing, plastics, packaging machinery manufacturing) or compressor industry.

Qualified individual will have mechanical or electrical engineering expertise, knowledge of parts numbering systems, bill of materials, and engineering revision systems.  Must be proficient with integrated business systems, design for manufacturing, and engineering design standards.  Must communicate well with external customers and internal customers/co-workers.  Must have ability to lead projects from concept through commercialization.

Essential to the position are ingenuity, communication, and follow through.
 
 
Job Number: 2010113272
Job Location: Appleton, WI
Duration: 6 months
Input Date: 03/17/2020
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fqnZQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Manager - Aerospace - Everett WA

Description:
Our client in the Seattle area is a part of a leading design and manufacturer of aerospace products and is looking for a Quality Manager.

Keltia Design Inc. is a technical support services company providing Aerospace Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry in WA and CA, and other locations around the US and Canada. We have been in business for nearly 20 years in the US and over 8 years in Europe.

Quality Manager - Aerospace - Mar 2020
Job Description:

Utilize quality science techniques to effect continuous performance improvement at assigned suppliers;
Reviews, analyzes, and reports on quality discrepancies related to process, assembly, manufacturing, mechanical, electrical, hydraulic, or electro-mechanical systems;
Ensure that performance and quality of products conform to established company and regulatory standards;
Use surveillance and auditing techniques to identify opportunities for process and product improvement; Interfaces with manufacturing, engineering, customer, supplier, and procurement (as appropriate) to ensure requirements / expectations are satisfied;
Facilitate development of supplier recovery plans;
Monitor and evaluate supplier process for compliance to purchase order and engineering requirements;
Collaborate with supplier to investigate root cause and corrective actions when process or product deficiencies are detected;
Identify, plan, and facilitate cross-functional improvement activities;
Deploy variation management tools and techniques at select suppliers to mitigate risk;
Have performed Quality System Audits, AS9102 First Article Reviews;
Computer proficiency and proficiency with MS Office products.
Essential Skills:
*Quality System Management
*System Integration Skills
*FAA Relationships
*Boeing Relationships
*AS 9100 Rev D. Audit Responsibility
*Audit & Assessment Responsibility such as Boeing and FAA
*Receiving Inspection Control
*Quality Process & System Management
*Final Product Control
*RFC Release
*Conformity of Products
*Procedure Updates
*Quality Manual Management
*PMA Parts Control
Additional Comments

Aerospace supplier experience is preferred and may be used as the primary selection criteria among equally qualified candidates.
 
Job Number: KD32020c
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/14/2020
Last Updated: 06/07/2020
Firm Name: KELTIA DESIGN INC
Attention: Jason Ruppert
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

RF Engineer

Description:
Job Description:
Support troubleshooting and link optimization efforts to reduce the impact of antenna pilot tone on the modem.  This work will involve RF troubleshooting and transmission planning improvements.  Will work closely with the antenna engineering and the satellite capacity team.  Assist with other cost savings efforts.
Responsibilities:
  • Work in lab environment to assemble various RF test scope. 
  • Troubleshoot satellite communication system components.
  • Help evaluate the impact of certain functionalities on the overall system performance.
  • Lab testing skills to evaluate the prototype unit to the design specification.
  • Create the Interface Control Document (ICD) and Training Material.
  • Train various engineering and operation group on system installation and operation of the system.

Knowledge/Skill Set:

  • Knowledge in installation and activation of a satellite communication system
  • Basic understanding of Integrated Antenna System including pointing and peaking
  • Basic understanding in free space link budgets, cascading link budgets, active/passive RF parts
  • Preferred - Knowledge in ARINC Simulation and OpenAMIP interface
  • Preferred - Competency in free space Link Budgets and cascading link budgets
  • Preferred - Ability to define and execute system and unit level tests

Education/Experience:

  • Undergraduate in electrical/computer engineering, computer science, physics or mathematics from an accredited university (Graduate in Electrical or Computer Engineering is preferred)
  • 3+ years of professional experience (+5 preferred)
  • Experience using tools like SNMP, Python, MATLAB, Linux Operating System, Spectrum Analyzer, Scripting

Please email Bryan Bui at bbui@pdstech.com or call at 206-763-2840
 

 
Job Number: 1910108061
Job Location: Lake Forest, CA
Duration: 6 months
Input Date: 10/23/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fPq6QAE&URLSource=cjhunter

RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking an RF Test Program Set (TPS) Design Engineer (Secret Clearance) in Baltimore / Linthicum Heights, MD.
 
Required Skills/Attributes or Domain Knowledge:
  • Mix of hardware RF/Digital and software skills (C/C++)
  • Background and working knowledge in RF theory and concepts
  • Test design and integration background
  • Candidate must be hands on person and have personal experience with test.

 
Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience.  Will accept candidates with more experience (8+ years) to fill at a higher level
 

 
Job Number: 1910107903
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 07/03/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP4yQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineers

Description:
STS Technical Services is hiring Reliability Engineers in Sterling Heights, Michigan.

Job Duties:
Perform reliability engineering and statistical data analysis activities
Perform Reliability assessments of new concepts including: Predictions Allocations; Failure Modes Effects Criticality Analysis (FMECA);Reliability Growth Analysis (RGA); Logistic Support Analysis (LSA) - Review TIRs and produce FACARs based on Engineering work
Perform Reliability Modeling using MADe Software
Support various program, provide reliability support to Engineering and Logisitcs
Maintain Reliability RAM-C model using modern Database tools, such as;MS Access, MS Excel (required) and Python, R, SQL (desired)
Perform reliability assessment of design. Follow/monitor results of vehicle testing. Investigate and report pattern incidents
Perform corrective action investigations
Conduct Root Cause and Corrective Action process, Lead and Maintain FRACAS
Interface with Reliability data bases and run Reliability models (Reliasoft, etc)
Prepare data for scoring/assessment conferences and upper management presentations
Run Design for Six Sigma and Robust Engineering projects
Position Requirements:
Bachelor's Degree in Electrical, Mechanical or Computer Science; Engineering is required with a minimum of 2 years applicable experience.
Some statistical and programming skills.
Master's Degree in Engineering is desired
Experience in reliability/maintainability disciplines is highly desired
Personal computer skills (competent with MS Office applications, Databases, Data Analysis), desired Programming Languages - Python, R, SQL, Java
Experience in report preparation and technical writing beneficial.
Ability to read and interpret technical drawings (blueprints, schematics, hydraulic and pneumatic flows)
Some travel required (minimal).
Must meet ASR.
Interface / coordinate effectively with engineers, support organizations, and customer.
Occasional weekday and / or weekend overtime required.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34839
Job Location: Sterling Heights, MI
Input Date: 05/27/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Marisa Munoz
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Senior Aerodynamicist

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
 
Job Number: t3260
Job Location: Southern, CA
Rate: $70-$90/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/08/2020
Last Updated: 07/03/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Production Operator

Description:
Senior Production Operator

Job ID # 2020-11321

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience:  2 Years

 

What You’ll Do:

Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
Reading and interpreting basic schematics and drawings
Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
Integrate sub-assemblies into final hardware
Perform final assembly of small systems
Perform basic electrical tests
Perform more complex rework and refurbishment of hardware and systems
May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
May conduct manufacturing inspections on processing line in accordance to quality specifications
May be involved in packing, movement and protection of finished product
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Perform general fabrication and marking
Operate less complex equipment
Perform basic loading and configuring of customer/standard software on customer device
Perform basic inspection per documentation
Accurately completes process paperwork and entering data into the applicable work order management system
Perform mixing of solvents and paints per specification
Support continuous improvement activities and participates in problem solving activities
Maintain a clean and orderly work area
Support safety/housekeeping standards
Contact are primarily within immediate work unit and direct supervisor
Normally follows established procedures on routine work with limited supervision, requires detailed instructions only on new assignments
 

What You’ll Need:

Clear manufacturing process skills
Clear knowledge of polarity and inspection criteria
Clear knowledge of Bills of Material (BOM)
Clear knowledge of applicable work order tracking Management systems
Clear communication skills, both written and verbal
Ability to work in team environment
Clear computer skills
Clear knowledge of measuring equipment and math
Ability to use various computer software applications to analyze and manage data
Ability to interpret basic documents, work instruction, and schematics
Ability to exhibit adaptability/flexibility
Ability to lift a minimum of 25 pounds
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma or equivalent is required combined with 2 + years of relevant experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11321
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 05/19/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Engineer Software Loader Verifier – F Band

Description:
Senior Software Engineer Software Loader Verifier – F Band

Job ID # 2020-11325

Contract Opportunity

Location: Sterling Heights, Michigan

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience:  5 Years

 

What You’ll Do:

Develop software for the Software Loader Verifier (SLV) for use both on vehicle and in the System Integration Labs (SILs).
Build and configure the VxWorks, Linux or Other operating systems.
Extensive Embedded VxWorks, Linux development with Board Support Package expertise (BSP).
Knowledge of board support for Arm, Power, Intel and RISC-V architectures.
Various Device Driver development, extensive Kernel experience, Bootloaders.
Writing various peripheral drivers highly desirable.
Excellent C, C++ programming experience.
Understanding of system calls and string data, knowledge of Networking (TCP/IP stack, lower level L2/L3).
Development of device drivers based on product requirements and performance criteria.
Debugging system using the testing and diagnostic routines on the hardware system and potentially in simulation.
Design and implement software for Abrams Vehicle Tank and weapon system devices from requirements phase to production phase.
Work closely with internal/external OS engineering team, Hardware design team, Chip vendors to debug and resolve issues.
Familiarity in designing system software for PPC and Intel based platforms using VxWorks and Linux OS.
Understanding of boot sequences, especially for unattended embedded VxWorks and Linux systems.
Experience with writing, building, testing and debugging of kernel tasks and loadable modules.
Experience writing test scripts and packaging specifications.
Good working knowledge of revision control and code review tools like Git.
Excellent team player with great communication skills (written, and verbal).
Knowledge of Secure boot development, Trust zone, TPM is a plus.
Configure the operating system to minimize exposure to cyber-attacks.
Install interface and access board level diagnostic tests.
Assist with development and/or review of software documentation including SRS,SVD, SPS and related test documentation
Prepare and submit status reports to management.
Insure all work conforms to software development process improvement and CMM I& Level 5 initiatives
 

What You’ll Need:

Ability to Obtain Secret Clearance
Experience with multiple protocols, such as TCP, UDP, IP, SAE J1939, CANopen, CORBA, and DDS.
Previous experience with military vehicle software preferred.
Experience in using Microsoft software products (Word, Excel, PowerPoint, etc.)
Experience with high level Programming Languages such as C and C++.
Familiarity with some of the SW Development tools desired &; DOORs, AdaCore, Code Peer,
Previous experience with Linux and VxWorks operating systems.
Experience with multiple busses, such as Ethernet, MIL-STD-1553B, and CAN.
Excellent customer skills required.
Excellent writing skills required.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree of Science in Electrical Engineering, Software Engineering or Computer Science Combined with 5 + years of relevant experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11325
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 05/20/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com