2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).

Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 02/14/2019

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)

Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 02/14/2019

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.

Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 02/14/2019

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2504 - LIAISON ENGINEER (MRB)-2504 - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of A/C Systems in conjunction with design Engineering as required.

Review & disposition of A/C Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Job is located in Toronto and is for weekend afternoon shift coverage

Bachelor or Masters degree in Aeronautical or Mechanical Engineering from an accredited University.

Minimum of ten years MRB experience or design experience in Aerospace

Possess good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications

Electrical & Systems experience as this would be considered an asset

Person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset

Are flexible with work schedule as this position requires weekend work on a rotating schedule and some travel and short-term relocation assignments, and it work day is Weekend-Afternoon Shift .

Job Number: 2504
Job Location: Toronto, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/28/2018
Last Updated: 12/05/2018

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
We have an urgent need for contract Aerospace Mechanics here in Moses Lake, WA. This is a very high paying position. The position also has opportunities to become full time.

Job Duties and Responsibilities

Service, repair, troubleshoot and modify aircraft and aircraft engines.
Repair, replace and rebuild aircraft structures, system and functional components.
Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
Research and understand FAA technical data relevant to assigned tasks.
Maintain the premises in a clean and organized manner.
Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Requirements
Knowledge/Skills/Abilities

Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.
Good leadership (individual contributor) presence:
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Good customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to address and solve important issues.
Good organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Good communication skills (oral, written) with customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.
Education

Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school.
A&P Certificate.
Japanese Bilingual preferred.
Experience

Three (3) plus years of aircraft mechanical experience preferred.

Job Location: Moses Lake, WA
Input Date: 10/29/2018
Last Updated: 12/13/2018

Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.

Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 02/15/2019

Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

Aeronautical Engineer

Description:
Location: Palmdale, CA
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '

Required Skills:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- BS+9-15 YRS or MS+7-13 YRS required.

Job Number: 9610
Job Location: Palmdale, CA
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 02/08/2019
Last Updated: 02/20/2019

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years

Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/19/2019

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aerospace Engineer - Air Systems

Description:

Support Flight Testing Activities, including but not limited to:
1. Discuss and review test plans and preparation activities.
2. Help determine test specifications (based upon system architecture).
3. Attend Ground/Flight Test briefing and debriefings
4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
5. Generate developmental engineering drawings and instrumentation change requests as required.
6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
7. Create and review Aircraft Restrictions
8. Create and review Aircraft Troubleshootings
9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
11. Process, analyze, and draw conclusions from post flight data.
12. Identify non-conformances, quality escapes, etc. to create rejection tags.
13. Make assessments to ensure safety of flight determination.
14. Document flight test design problems for long term fix.
15. Generate and review appropriate limitations documentation.
16. Write flight test results reports.
Complete special projects and tasks assigned by Group Lead.

Level Requirements (Minimum):
Education
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
- Other Engineering fields may be considered.
Experience
Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.

Knowledge/Skills/Abilities:

Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
Good leadership presence as well as people management skills:
- Future-oriented in thinking and operation.
- Able to lead by example and live/work by company values.
- Ability to successfully contribute to a positive and productive work environment.
- Able to instill a sense of urgency in team members.
- Able to be patient and objective in difficult situations with different types of people.
Strong skill set for:
- Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
- Strong follow-through, quick thinking and resourceful.
- Ability to remain calm, cool and collected in stressful situations.
- Strong sense of urgency to resolve the issue.
Strong organizational, time management and prioritization skills:
- Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
- Able to be flexible with attention and priority.
- Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal team.
- Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
- Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
- Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
- Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
- Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
- Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
- Proven track record of improving the efficiency of assigned processes or procedures.

Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.

Job Duties and Responsibilities:

Review and support Avionics Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Create, review and approve interface control documents and any sub level writing interface documents.
Support Avionics Flight Testing Activities, including but not limited to:
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Complete special projects and tasks assigned by Group Lead.

Requirements
Knowledge/Skills/Abilities

Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to in still a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)

Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/13/2018

Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Electrical Systems

Description:
Role Description

The Aerospace Engineer, Electrical Systems position located here in Moses Lake, WA is responsible for supporting for the development, testing and certification of the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, wiring, etc.). The role requires the significant exercise of independent discretion and judgment in matters of significance.

Job Duties and Responsibilities:

Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis repots.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:
Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test result reports.
Electrical Systems.
Creating instrumentation definitions for the electrical systems (locations of instrumentation, sample rates, unit definitions, etc.)
Release of engineering documentation for component changes and new installation, ensuring appropriate configuration control
Complete special projects and tasks assigned by Group Lead.

Requirements
Knowledge/Skills/Abilities

Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people/
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).

Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/13/2018

Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:

General Mechanic
Electrical
Structures
Avionics Tech
Quality Inspection
Supply Chain Specialist

Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!

Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com

Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters

Job Location: Nationwide
Input Date: 06/12/2018

Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Electrical Engineers

Description:
Jets experience a plus

Job Location: Midwest
Input Date: 01/14/2015

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus

Job Location: Southeast
Input Date: 01/14/2015

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Systems Engineer

Description:
Avionics Electrical Systems Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 12/28/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.

Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 02/20/2019

Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Liaison Engineers

Description:
STS Technical Services is Hiring Avionics Liaison Engineers in Purchase, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Duties:

Provides friendly service to and maintains positive relationships with all internal and external Customers
Reviews related Service Bulletin and Regulatory Documents with the Manger and initiates required action by generating the appropriate documents
Provides day-to-day reliability surveillance of components and pilot reports for assigned systems
Coordinates Major Repair/Alteration Approval with appropriate regulatory and technical authorities
Provides periodic reliability reports as required on assigned systems
Coordinates technical requirements with manufacturers and repair agencies for assigned systems and components
Provides internal training as reliability or conditions may warrant on assigned systems
Provides technical assistance and troubleshooting assistance within the Maintenance and Engineerin
Department and other departments as required or requested
Remains current on all assigned systems and components
Remains current on state-of-the-art avionics/electrical equipment
Acts as FAA Liaison on Avionics/Electrical matters as required
May assume the duties and responsibilities of the Manager of Avionics/Electrical Engineering in the absence of the Manager
Complies with whatever directives are set forth from time-to-time by the Manager of Avionics/Electrical Engineering

Qualifications:

FAA Airframe and Powerplant license preferred, but not required
4 Year Engineering Degree preferred, but not required
5 + years of Avionics Engineering experience in an airline or MRO environment

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.

Job Number: 44656
Job Location: Purchase, NY
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018

Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired

Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 02/14/2019

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C4I and Cybersecurity Engineering Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

C4I and Cybersecurity Engineering Specialist
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7285

Responsibilities:
• Analyze requirements for system, subsystem, and LRU-level electronics in C4I/EW and related systems, with a focus on cybersecurity
• Develop subsystem-level hardware and software functional design and interfaces
• Write system/subsystem specifications for vehicle electronics
• Develop and document verification plans and procedures
• Perform/support integration/verification of C4I/EW subsystems in the laboratory and on combat vehicles
• Analyze, produce, and compile artifacts for Risk Management Framework (RMF) and/or cross-domain approval
• Analyze, produce, and compile artifacts for program protection
• Provide periodic reports to management
• Participate in proposal development and project technical planning

Qualifications:
• Required – able to obtain and maintain a Secret clearance; current clearance preferred
• CISSP desired, preferably with a concentration in ISSEP
• Experience with C4I and Cybersecurity engineering including one or more of the following:
o Designing secure, tactical systems/networks
o DIACAP/RMF preferred
o Ethical hacking, penetration testing, and data fuzzing tools
o Program protection, system security engineering, and critical function analysis
o Systems engineering with military vehicle electronics
o Military radios, intercoms, mission command software, navigation, and electronic warfare
o Radio frequency (RF) and computer/communications networking analysis/design
o Network centric warfare / operations
o Network & RF modeling and simulation (e.g., OPNET Modeler, STK, EMIT, Savant)
o Configuring network switches and routers
• Familiarity with Microsoft Office software (Word, Excel, PowerPoint, Visio) required
• Proficiency with laboratory and test/analysis equipment preferred
• Able to travel (mostly domestic, some international) up to 15%
• Must satisfy Anthropometric Size Restrictions for access to military vehicles and be able to climb on vehicles and pass through hatches
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science in Computer Engineering or Electrical Engineering required, Master’s desirable; degrees in Mathematics, Computer Science, or Cybersecurity will be considered with relevant engineering experience
• Minimum of at least 10 years’ experience preferred.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7285
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C4I/EW Senior Systems Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

C4I/EW Senior Systems Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7286

Responsibilities:
• Perform requirements analysis for system, subsystem, and LRU-level electronics in C4I/EW and related systems
• Develop subsystem-level hardware and software functional design and interfaces
• Write system/subsystem specifications for vehicle electronics
• Develop and document verification plans and procedures
• Perform/support integration/verification of military electronics in the laboratory and on combat vehicles
• Provide periodic reports to management
• Participate in proposal development and project technical planning

Qualifications:
• Required – able to obtain and maintain Secret clearance; current clearance preferred
• Experience in C4I/EW Systems Engineering including one or more of the following:
o Military radios and intercoms
o Radio frequency (RF) and computer/communications networking analysis/design
o Mission Command software
o GPS and navigation devices
o Electronic warfare systems / components
o Intelligence (SIGINT, ELINT, COMINT, etc.)
o Military vehicle electronics
• Familiarity with Microsoft Office software (Word, Excel, PowerPoint, Visio) required
• Proficiency with laboratory and test/analysis equipment preferred
• Able to travel (mostly domestic, some international) up to 15%
• Must satisfy Anthropometric Size Restrictions for access to military vehicles and be able to climb on vehicles and pass through hatches
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science in Computer Engineering or Electrical Engineering required, Master’s desirable; degrees in Computer Science, Mathematics, or other Engineering will be considered with relevant engineering experience
• Minimum of 5 years’ experience preferred

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7286
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C6141 Electro-Mechanical Tech I

Description:
Primary Function: Conducts preliminary diagnostic analysis of products for repair and/or troubleshooting using schematics, diagrams, and system knowledge.

Major Responsibilities:

Demonstrates good mechanical and/or electrical aptitude.

Has experience with automotive, truck or boat mechanics or electrical systems.

Able to disassemble mechanical and electrical vehicle components.

Able to install new mechanical and electrical vehicle components.

Able to conceive of and prototype simple mechanical devices such as armor plate, brackets, fixtures, etc.

Demonstrates basic cutting, grinding, drilling skills and/or soldering, wiring, and electrical fabrication skills.

Good problem solving skills.

Works on assembly of products to meet defined schedule.

Assembles pre-made mechanical components according to print, manual, or verbal instruction.

Tracks performance by updating assigned metrics.

May, train or guide staff with less experience in particular products.

Follows released and standard procedures to assemble products.

Conducts troubleshooting of parts and products using schematics and drawings.

Takes direction from more senior staff.

Demonstrates the ability to work independently and with limited supervision as needed.

Position Requirements:

High school diploma

0 -2 years of experience conducting related electrical/mechanical assembly tasks.

Job Number: 18-47441
Job Location: Columbus, OH
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-25 00:00:00.0
Start Date: 2018-11-26 00:00:00.0
Input Date: 11/07/2018
Last Updated: 01/10/2019

Firm Name: NESCO RESOURCE
Attention: Aaron Ludwig
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Operator

Description:

Must be proficient in AutoCAD (version 2014 or higher). Must be proficient using Windows based software and MS office 2000 or higher (Excel, Word, PowerPoint, etc.). Must have strong organizational skills. Someone with a little bit of experience in the construction field

PREFERRED.

More along with electrical or mechanical construction, not electronic board layouts.

Willing to look at candidates recently graduated from school but has some business experience as a CAD person.

High school or equivalent education required.

Resumes need to be well constructed, accurate, spell checked, etc. which shows attention to detail with the desire to do a good job. It shows that the candidates care about what they put their name on.

Receive project assignments from Design Team member.

Under supervision, prepare construction drawings required to support the installation of electronic special systems (fire alarm, security, access control, and other low voltage specialty systems)

Electronic systems drawings will typically consist of items such as floor plan layouts, riser diagrams, electrical interconnections drawings and installation terminations.

¿Prepare submittal documentation (i.e.,. data sheets, battery calculations) Maintain project drawing files, and associated records and documentation tracking & maintaining as-built drawings Perform other duties as assigned.

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Number: 18-43362
Job Location: Irving, TX
Rate: 22.46USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-05 00:00:00.0
Start Date: 2018-06-25 00:00:00.0
Input Date: 10/11/2018
Last Updated: 11/29/2018

Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.

CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.

Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 12/28/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Configuration Management
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7288

Responsibilities:
• Support Process Engineering Changes; focus on data and change management documentation, not involving actual Engineering design work.
• Support analysis and updating of Excel spreadsheets to track the Engineering Change Accomplishment Records for manufacturing incorporations.
• Support processing of Subcontractor Data Requirement Lists
• Prepare and route associated emails requesting approvals, archiving documents and updating the database to reflect accomplishments.

Qualifications:
• Proficient in writing changes in Teamcenter or another major Product Data Management System
• Must have exceptional team relationship skills as well as exceptional attention to detail and quality
• Must demonstrate good written and oral communication skills
• Proficiency with MS Office applications including Word, Excel, and PowerPoint
• Able to work independently as well as in a team environment
• Demonstrated effective time management skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Pursuing a Bachelor of Science degree in an engineering discipline, Electrical Engineering, Mechanical Engineering, or Physics preferred, from an accredited 4-year university or college.
• Ideal candidate should have between 1-3 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7288
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Control System Engineer

Description:

Legacy Engineering, a division of PDS Tech, is seeking a Control System Engineer - Fire Protection System for the Regional Jet Program.

The primary work location will be in Nagoya, Japan. However, Engineers may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.

The Control System Engineer will work as an Electrical Design Specialist for ATA 26-10 (Fire & Smoke Detection) and ATA 26-20 (Fire extinguishing). This includes all FPS system design aspects and interfaces within the FPS team and all other engineering teams; as well as interfacing with the FPS component suppliers in order to achieve the correctness and completeness necessary for FPS certification in the regional jet program.

Basic work scope is to provide technical assistance to the development and certification of the regional jet program, focusing primarily on FPS performance assessment and optimization.
This activity includes:
1. Prepare and review wiring diagram, electrical interface documents, Perform tests and troubleshooting in the RIG / Aircraft
2. Support electrical qualification discussions for FPS components.
3. Have the necessary technical background and competence in the system design as defined in this SOW scope.
4. As required, conduct interface meetings with the FPS component suppliers.
5. Prepare FPS design requirement documents, test specifications of type certification tests, test plans and test procedures,
6. Coordinate with internal members, suppliers and authorities towards executing type certification tests.
7. Prepare analysis documents, test compliance plans of analysis, and execute tests.
8. Review supplier TSO and create TSO report
9. Interface with the flight test team in Nagoya and the Seattle Engineering Office including Moses Lake to follow the FPS system tests conducted. Responsibilities include participating with the FPS team to prepare and/or review responses to flight test problem reports, review of test data and ground and flight test plans and test reports.
10. Responsible for real-time telemetry monitoring during ground and flight tests, data analysis and documentation.
11. Perform or assist with inspections and on-aircraft troubleshooting.
12. Assist with identifying problems, adjusting and repairing systems during the troubleshooting process according to specifications, technical drawings, manuals and established procedures.
13. Lead resolution of design challenges and any issues relate to aircraft certification.
14. Act as an interface for the identified FPS ATA with the involved design specialists, FPS system supplier and subcontractors, in particular with the Interior Group.
15. Be fully involved in supporting the Design Change process and activity.
16. Perform other related tasks as assigned by the Team Leader.
Be prepared to work as a team member in a multi-cultural and international working environment at the Headquarter based in Japan.
The engineer must be able to utilize interpersonal and communication techniques, working in a team environment as well as identifying potential issues with the ability to plan and implement short and long term goals in aircraft development.

Work Experience and Skillset:
1. Each Engineer is mandated to meet the schedule by resolving problems and mitigating risk. Coordinate Interaction with other stakeholders (etc. PMO, SCM, and other engineering teams)
2. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, discussion with relevant parties.
3. Over 5 years experienced for designated design area.

Job Number: 1810094281
Job Location: Nagoya,
Duration: 18 months
Input Date: 10/16/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKRQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II with PTC CREO

Description:
WHO ARE WE
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer II with CREO experience. This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Creativity and latitude is expected.
Participate in a variety of process improvement projects.
Able to support design reviews with timely and relevant information and understanding.
Performs other duties as required.

EDUCATION AND EXPERIENCES

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Must understand and apply Geometric Dimensioning and Tolerancing.
Must be proficient in PTC CREO Software.

WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/Hurst-TX/Design-Engineer-II_R0005454

Job Number: R0005454
Job Location: Everett-WA , San Diego-CA, Hurst-TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/15/2018

Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: P O BOX 19879
City, State: SAN DIEGO, CA 92159
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer III

Description:
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer III in Reno, NV. This position will provide onsite support to the customer and will be the liaison between the customer and offsite Engineering Services project team. This individual will be required to attend customer meetings, answer customer questions, and deliver important information to the offsite team to ensure a successful integration. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft sub-systems layouts and the design of individual components, assemblies, and installations. Tasking will include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES for Design Engineer III in Reno, NV

The Design Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodologies, to provide effective solutions to problems involving a wide number of variables.
Review and understand customer’s Statement of Work (SOW), technical specifications, Interface Control Drawings, schedules and budgets.
Create/compile technical documentation that supports evolving/changing designs.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
Assist in producing engineering quotes to specifications or customer repair demands.
Create Service Bulletins, Repair Schemes and Service Letters that meet the customers’ modifications or repair needs.
Responsible for communicating with customers and suppliers, translating technical information and ensuring compliance to standards and requirements.
In-depth knowledge of standard concepts, practices, and procedures.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems that are complex in scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Provide direction and serve as expert resource to other department engineers and management team.
Function as an interface to ensure complete understanding of requirements, goals and constraints.
Document issues and communicate to necessary departments, evaluate potential problems and provide risk assessment. Follow-up to ensure that issues have been successfully resolved.
A wide degree of creativity and latitude is expected.
Participate in a variety of process improvement projects.
Will facilitate or lead teams.
Able to support design reviews with preparation and knowledgeable presentation of review material.
Directs work of others and acts as a lead.
Performs other duties as required.
EDUCATION AND EXPERIENCES for Design Engineer III in Reno, NV

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.
WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/LMI---San-Diego---Remote-California/Design-Engineer-III_R0005438-1

Job Number: R0005438
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 11/15/2018

Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: P O BOX 19879
City, State: SAN DIEGO, CA 92159
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Everett, WA
2018-7191

Responsibilities:
• Work with customers to develop and document complex electronic & electrical system requirements.
• Analyze and translate requirements into system, hardware & software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning, and provide other support of, fielded hardware & software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7191
Job Location: Everett, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Seattle, WA
2018-7190

Responsibilities:
• Work with customers to develop and document complex electronic & electrical system requirements.
• Analyze and translate requirements into system, hardware & software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning, and provide other support of, fielded hardware & software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7190
Job Location: Seattle, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Design and Analysis Engineer 4 - (10) - OK - C

Description:
Chipton-Ross is seeking 10 Design and Analysis Engineer 4 located in Oklahoma City, OK

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 174543
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 10/16/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 5 (3) - OK - O/M

Description:
Chipton-Ross is seeking3 Design & Analysis Engineer 5's located in Oklahoma City, OK

RESPONSIBILITIES:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 174544
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/16/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Diagnostics Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Diagnostics Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7183

Join our team as an entry level Diagnostics Engineer to conduct detailed analyses and assessments of evolving and approved designs in support of the development of troubleshooting support documentation.

Responsibilities:
• Interface with hardware & software design engineers to understand the functionality of equipment.
• Conduct detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to fault isolate/troubleshoot and support the design.
• Translate engineering & other technical information into troubleshooting source data (procedures and schematics) in support of Integrated Logistics Support (ILS) product development.
• Perform on-vehicle fault insertion to verify that equipment and troubleshooting procedures function properly.
• Travel about 5%

Qualifications:
• Able to read and interpret schematics and hardware/software specifications.
• Proficient with MS Office applications (Word, Excel, PowerPoint, Access required; Visio preferred).
• Experience in fault isolation and/or troubleshooting of complex systems, including automotive or military preferred.
• Experience with wiring diagram and schematic development preferred.
• Strong interpersonal and communication (oral and written skills) desired.
• Familiarity with US Army logistics support structure, policies and procedures preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering and 1-3 years of experience required. Other Degrees will be considered based on experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7183
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Digital Design Engineer

Description:
Job Description:

Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

This position will require some travel and require a security clearance.

Required Skills & Experience

A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

Experience in deriving verification test benches from detailed specifications is required.

Familiarity with at least one (1) commercial scripting programming language such as

PERL or Python is required.

Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).

Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs

Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 02/20/2019

Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter/Designer

Description:
Nesco Resource is seeking an CAD Drafter/ Designer in the Ypsilanti, MI area.

As an CAD Drafter/Designer you will be responsible for supporting the engineering team in developing designs through AutoCAD.

Job Description

Develop designs with the engineering team.

Convert designs both verbally and written information into 3D drawings.

Creation of Panel Layout and one line power distribution.

Review and Problem solve designs and modify.

Maintain internal and client CAD drawings.

Requirements

Proficient in Inventor/AutoCAD with 2 - 4 years experience.

Ability to work independently with minimum supervision.

Experience with blueprint and schematics.

Accuracy and attention to detail.

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Number: 18-46088
Job Location: Ypsilanti, MI
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-10-30 00:00:00.0
Input Date: 10/30/2018
Last Updated: 01/07/2019

Firm Name: NESCO RESOURCE
Attention: Cynthia Clarey
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Job Location: Savannah, GA
Input Date: 07/07/2014

Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort

Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 02/15/2019

Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: lpeck@jsginc.com
Website: www.jsginc.com

EPS Engineer

Description:

The Engineer shall work and coordinate design, development and tests for electrical systems and components. This includes interfacing with all other aircraft functions and engineering teams to coordinate and obtain approval of any task assigned contributing to the aircraft and Electrical Power System development and Certification.

Scope of Work:

(1) will work as a team member of Electrical Power System Team, Electrical Power and Lighting System Design Group.

(2) Basic work scope is to develop and finalize the designs of electrical power switching equipment, power distribution equipment, and power conversion equipment such as inverters in order to structure Electrical Power Systems.

(3) This scope of activity involves:

(a) Evaluating the current aircraft design, with respect to compliance to the Electrical Power System related airworthiness regulations of JCAB, FAA and EASA,

(b) Coordinating integration of design change activities originated from Electrical Power Supply System or when requested by a system that interfaces with the electrical power system.

(c) Presenting and discussing the Electrical Power Supply System compliance with the Certification Authorities.

(d) Leading verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.

(4) All tasks required to perform above activities is considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners/suppliers.

(5) Coach and mentor members about professional knowledge on the Electrical Power System.

(6) Manage/discuss the technical contract requirements with applicable Electrical Power System suppliers and other interfacing suppliers as appropriate.

(7) Provide expertise to assist in resolving the Electrical Power System performance during any rig testing or Flight testing.

Requirements
More than 10 years of experience in aerospace EPS
Good English verbal, writing skills
Motivated to work in Japan

Job Number: 1810086448
Job Location: Nagoya,
Duration: 24 months
Input Date: 07/18/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTnNAAU&URLSource=cjhunter

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program.
This position is located in Nagoya, Japan.

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;

Scope of Work:
Work as Global engineering expert as part of the EWIS team
Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
This activity includes:

Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
Coordinate activities related to defining the ESSDs required to generate wiring diagrams
Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
Coaching and Education of company members about professional knowledge in the EWIS domain.
Interface with other suppliers as appropriate.
Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.

Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electric Controls Engineer

Description:

A minimum 5 years experienced electrical control designer.

1 Overview for control design
Our design works are mainly applied to body / assembly process in automotive industries.
The control is involved with:
1-1 Parts loading equipment / Parts unloading equipment / Jig turn table / Line conveyor system
1-2 Jig for parts set / Jig for parts weld / Robot hand to grip parts
1-3 Parts handling robot interface / Parts welding robot interface / Fixed gun station interface
1-4 Small parts (bolts / nuts / etc.) feed equipment interface
1-5 Gun cooling system control
1-6 Over all robot cell integration combined with item 1-1 through 1-5.

2 Electrical Project Estimate
2-1 Be able to estimate price for parts and labor to complete
control design / fabrication / installation / commissioning

3 Hardware Design
3-1 Be able to design and trouble shoot:
Power distribution control system from 480VAC-3Phase -> 208VAC-3Phase -> 120VAC -> 24VDC
3-2 Be able to design and trouble shoot:
Control system with safety PLC and safety relay unit by TOYOPUC / OMRON / MITSUBISHI / A-B / KEYENCE / SUNX
3-2 Be able to design and trouble shoot field control net works:
UNI-WIRE / DEVICE NET / CC-LINK / COMPOBUS / DATA HIGHWAY / PROFIBUS etc.
3-3 Be able to design and trouble shoot PLC input device:
PHOTO SENSOR / LIGHT CURTAIN / PROXIMITY SENSOR / TOUCH SENSOR / REED SENSOR / LIMIT SWITCH
3-4 Be able to design and trouble shoot PLC output device:
RELAY / CONTACTOR / MOTOR STARTER / SOLENOID VALVE etc.
3-5 Be able to design and trouble shoot:
Single phase AC motor with capacitor, VFD, 3Phase induction motor, Servo Motor etc.

4 Software Design
4-1 Be able to design and to trouble shoot PLC / SERVO AMP & MOTOR / ENCODER / HMI etc.
PLC includes TOYOPUC / OMRON / MITSUBISHI / YASKAWA.
HMI includes MITSUBISHI and PROFACE.
Candidates must have over 5 years TOYOPUC PLC design experience.
4-2 Be able to design and to trouble shoot net work interface with
ROBOT / WELD TIMER CONTROL / OTHER AUXILIARY EQUIPMENT

5 Control Support
5-1 Be able to correct / adjust wiring and programming errors during equipment auto run test.
5-2 Support Robot Teach engineer to run full auto with robots
5-3 Support our customer for any control adjustment at a job site.

6 General Requirement
6-1 Self starter to handle multi tasks
6-2 Team player to help other short handed works
6-3 Be able to manage time to finish assigned works on time
6-4 Articulated / organized person
6-5 Willing to take 'Out of State Site Jobs' (few weeks at time, 2~3 times per year)

Job Number: NSR10034ECE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Exempt
Duration: Direct Hire
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 11/14/2018

Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

Electrical / Electronic Systems Design & Analysis Engineer III - (Everett & Seattle)

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: EEWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 02/18/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV & V - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 01/25/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer IV & V - (OK)

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering.

Qualification:
─ Electrical Power System >8 years (Required)

Experience:
─ Ability to develop work packages and design concept from statement of work and system requirements.
─ One line, three line AC & DC power architecture and power distributions.
─ Power system load flows, AC 1ph/3ph, and DC load analysis.
─ Equipment proper breaker sizing and wire sizing/voltage drop analysis.

Knowledge:
─ Electrical equipment such as integrate drive generator, auxiliary power unit, generator control unit, current transformer, generator breaker/relays, frequency 400Hz/60Hz converter, voltage AC/DC converters, and other protective devices.
─ Mil-Std-704; DO-160 power quality and FAR 25 FAA Generating Power System.
─ Hand-on test equipment is preferred.
─ Capability to provide leadership, guidance to less experienced engineer team members.

Job Number: EEok
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 11/16/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable

Job Location: Savannah, GA
Input Date: 07/07/2014

Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical Building Designer -- Mid-Level

Description:

Job Location: Braintree, MA
Input Date: 06/12/2018

Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electrical Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7199

Responsibilities:
• Design, develop, and support circuit design, component selection, procurement, and prototype hardware debug and builds
• Construct and design new control solution(s), familiarity of design concepts and approaches to motion control and fire control applications
• Design and develop Electrical Components, LRUs and subsystems for processor, I/O, and display products
• Support concept to production delivery including design, debug, test, and qualification of design articles
• Review and develop H/W and S/W requirement documents and test plans
• Perform system, subsystem, & LRU-level requirements analysis as relates to weapon motion control, identifying interfaces & required functionality
• Perform error budget analyses expertise to support fire control integration
• Understand and develop vehicle & subsystem-level integration and test plans
• About 5% travel time

Qualifications:
• Broad based knowledge of electrical systems, system/subsystem, hardware, and software requirements
• Demonstrated experience with integrating electrical / electronic components and associated software/hardware into ground combat vehicles
• Experience with network-based vehicle (combat or automotive) architectures
• Experience troubleshooting Vetronics systems required
• Experience with link-based (e.g., CAN) diagnostic systems required
• Experience with J1939 CAN protocol
• Experience with SIL and vehicle-based Vetronics testing
• Familiar with TCP/IP and UDP protocol
• Able to use engineering development and test tools
• Strong interpersonal skills and ability to work with interdisciplinary teams
• Strong multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s in Electrical Engineering or related engineering field and 10+ years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7199
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 4

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
•AutoCAD required, Catia V5and CHS preferred
•Experience with power distribution, lighting, switching, sizing and routing.
•Familiarity in mechanical system design
•Familiarity with aircraft STC procedures preferred. 9GV,GVI, and GVII electrical system design experience preferred.
•14 CFR 25 Subpart H - EWIS experience preferred
•Part 25 Certification Experience for Cabin Interiors preferred
•Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
•Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
•Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
•Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
•Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
•Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
•Is consulted extensively by associates and others as a recognized authority within the field
•Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
•Approach to problem solving balances technical product, cost and schedule
•Works without appreciable direction; work is reviewed from a long-range perspective for desired results
•Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Job Number: 24-288
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 01/14/2019

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/24/2018
Last Updated: 01/11/2019

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Design Engineer

Description:
Are you looking for an exciting career opportunity as an Electrical Design Engineer? Please reach out to Pam at: pzack@pdstech.com or call her at 480.212.0849

Description:
Analog Design Engineer

Experienced Electronics Engineer to provide technical expertise and project planning support to develop new product lines and to support existing group product lines with design engineering related functions.

This position requires experience interacting with customers and working in a team environment.

Key Responsibilities:

Provide Analog Design and Analysis expertise utilizing Cadence Simulation tools.
Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, engineering analysis, product design, drawing preparation, and Design Reviews as well as support of business development (marketing) activities.
Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, drawing preparation, cost estimation, and product planning.
Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results.
Provide leadership of failure investigation activities through application of rigorous root cause analysis.
Provide project design support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities.
Assist in design and development of manufacturing tooling and test equipment.
Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports.
Support kaizen-related process improvement activities.

Qualifications:

Bachelor of Science Degree in Electronics Engineering; Advanced degree a plus.
Minimum of five years of experience in design-related engineering position.
Experience developing and integrating electronic assemblies into product designs preferred. This includes leveraging the entire value chain from supplier through final factory manufacturing operations.
Experience with EMI/EMC compliance.
Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools.
Experience with government specifications and industry standards related to safety critical electronics a plus.
Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint).
Intermediate skill level in Microsoft Project and Visio preferred.
Advanced skill level in Analog Simulation, preferably with Cadence PSPICE.
Strong Analog background with High Power, High Voltage experience a plus.
Experience performing Stress Analysis and Thermal Analysis.
Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving
Superior written and oral communication skills.

This is a Direct Hire position with opportunity for growth!

Qualifications:

Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical. Advanced degree a plus
5 years’ experience in design; preferably in related field.
Design experience- plan to production is a must.
2 years participation in cross functional team while developing products is preferred.
Presentation skills are required.

Job Number: 1810089190
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfR8AAI&URLSource=cjhunter

Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy

Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 02/14/2019

Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 01/25/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Candidate will develop wiring diagrams and wire harness assembly build drawings using the Mentor Graphics Capital tool suite. The candidate will perform the work within the customer instance of these applications on the customer network. Candidate will participate in regular team tag-ups and be responsible for reporting status on the drawings for which they are specifically responsible for. The candidate shall be proficient in the use of Mentor Graphics Capital Logic and Capital Harness XC applications.

Required: Bachelor of Science degree with 5 years of experience.

Candidate must be a U.S. Citizen. This is position will potentially last 3 -6 months, located in Oklahoma, OK.

Job Number: 18-277
Job Location: Oklahoma City, OK
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/08/2018
Last Updated: 12/04/2018

Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Electrical Engineer

Description:
Detail oriented engineer with experience in the design of cables and harnesses for high reliability applications in harsh environments. AutoCAD required. The engineer shall work under the direction of a design lead, and create cable and harness assembly designs using MIL-SPEC components. Select the appropriate components including connectors, backshells, and cable. Perform analysis to determine the appropriate strain relief and sealing sizes. Create detailed design assembly drawings. Work with 3D routing modeler on the installation plan. Create wirelists and schematics. Update system level and hardware schematics. Create reference designator marking methods. Perform the proper wire shield termination for EMI/TEMPEST control.

Skill/Experience/Education:
Mandatory:
AutoCAD. Knowledge of Cable Design

Desired:
Experience in Marine Applications. . Experience in undersea molded cable assemblies, potting compounds, fiber optics, Oil Filled pressure tolerant cable assemblies is also desired.

Job Number: 18867
Job Location: West Palm Beach, FL
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 11/08/2018
Last Updated: 02/14/2019

Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: pritam@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: West Palm Beach, FL
Rate: $25.00 - $35.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- Detail oriented engineer with experience in the design of cables and harnesses for high reliability applications in harsh environments.
- AutoCAD required.
- The engineer shall work under the direction of a design lead, and create cable and harness assembly designs using MIL-SPEC components.
- Select the appropriate components including connectors, back shells, and cable.
- Perform analysis to determine the appropriate strain relief and sealing sizes.
- Create detailed design assembly drawings.
- Work with 3D routing modeler on the installation plan.
- Create wire lists and schematics.
- Update system level and hardware schematics.
- Create reference designator marking methods.
- Perform the proper wire shield termination for EMI/TEMPEST control.

Skill/Experience/Education
Mandatory:
- AutoCAD
- Knowledge of Cable Design

Desired
- Experience in Marine Applications.
- Experience in undersea molded cable assemblies, potting compounds, fiber optics, Oil Filled pressure tolerant cable assemblies is also desired.

Job Number: 10090
Job Location: West Palm Beach, FL
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/17/2018
Last Updated: 12/26/2018

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must Be Eligible for a Clearance

Proven and demonstrated experience with integration of electrical / electronic components and associated software/hardware into ground combat vehicles

Experience with network-based vehicle (combat or automotive) architectures

Experience trouble shooting Vetronics systems required

Experience with link-based (e.g., CAN) diagnostic systems required

- Experience with J1939 CAN protocol

- Experience with SIL and vehicle-based Vetronics testing

- Familiarity with TCP/IP and UDP protocol

Job Number: 45414
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/09/2019

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Seeking an Electrical Engineer. The selected individual will support multiple aspects of the project including:
• Design and build of electronics hardware and circuits for power, control, and diagnostic systems associated with experimental plasma physics hardware and
• Design and interface with facility engineering team on the design and build of specialized lab facilities and their interface with experimental plasma physics hardware. Tasking significantly involves high voltage/power systems with stringent emission requirements. Tasking includes circuit/PCB design, electrical power system and distribution design, energy storage system design, electrical wiring and controls design, and support to EMI/shielding analysis and design.

• Will work with other engineers and physicists on daily basis on this tasking in office and lab environment (hands on build and test of hardware is required).
• Will write and conduct component installation, checkout, and troubleshooting procedures.
• Will support laboratory operations and testing.
• Must be able to wear radiation sensor in laboratory environment.

Basic Qualifications:
• Bachelor’s degree OR above in electrical engineering or related field.
• Experience with electrical system hardware (laboratory or other environment).
• Experience in electrical system definition.
• Experience creating electrical schematics.

Desired skills:
• Experience with High Voltage electrical power architectures and system hardware (generation, distribution, storage).
• Experience with facility electrical and grounding design and hardware interface.
• Experience with electrical system shielding and noise reduction.
• Experience with schematic capture and PCB design using Eagle and Altium.
• Experience with PCB fabrication and test.
• Experience with connector selection and cable harness fabrication.
• Experience trouble shooting electrical systems.
• Experience in laboratory environment (high vacuum plasma physics preferred).
• Experience with laboratory diagnostic test equipment, DAQ, and PLC systems.
• Experience with Matlab and Labview software packages.
• Experience with 3D CAD tools - CATIA V5.
• Experience with PSpice and Simulink circuit design and analysis tools.
• Experience with MS Office software tools.
• Good oral and written communication skills.

The Structures Company is an AA/EOE.

Job Number: 249
Job Location: CA
Rate: OPEN - ***DOE***
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 12/03/2018

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Grand Prairie, TX
Rate: DOE
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- FPGA or ASIC design verification for safety crucial systems.
- Job responsibilities include analysis and review of requirements, test plans, verification implementation, and generating documentation associated with the qualification of safety critical hardware.

Skill/Experience/Education
Mandatory:
- Firm understanding of how to verify hardware design requirements.
- Hardware/Software Test - Derive test requirements, generate test plan, generate test procedures, conduct test, generate test report.
- Familiarity with nuclear regulatory or DO-254 processes
- Firm understanding and experience with verification process for safety critical systems.
- Familiarity with FPGA design verification using SystemVerilog.
- FPGA or ASIC Design Verification - Understanding of programmable logic using FPGAs.
- Ability to read and understand VHDL and SystemVerilog.
- Able to interpret requirements and validate verification implementation.
- Familiarity with managing subcontractors.

Desired:
- Firm understanding of SystemVeriflog and FPGA verification processes (constrained random testing, code coverage, clock domain crossing, etc.).

Job Number: 10043
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/29/2018
Last Updated: 01/02/2019

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
AutoCad required, Catia V5and CHS preferred. 14 CFR 25 Subpart H - EWIS experience preferred. Part 25 Certification Experience for Cabin Interiors preferred. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design. Familiarity with aircraft STC procedures preferred. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

Job Number: 18-140257
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/27/2018

Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
-Manages a team and provides direction development, design, and testing of electrical components, particularly motors and sensors for manned space applications. This will included extensive supplier technical management.
-Project Engineering Supplier Designed Equipment (SDE) Integrated Product Development (IPD) Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities aboard the ORION Program for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the ORION program in Windsor Locks, CT.
-The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components by following the SDE Engineering Standard Work processes according to the approved budget and schedule.
-Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and UTAS Engineering Change System are a plus. The SDE IPD team lead will report directly to the Program Engineering Manager and Program Managers, and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. Participation and preparation for monthly program and design reviews with Lockheed Martin are also required. This position requires creation and delivery of technical presentations to management and customers.

Additional Job Details:
*Education / Certifications
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 4+ years leading teams and managing projects *Experience/Qualifications Prior experience working with or managing multi-disciplinary teams in a fast paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in weekly/monthly reviews with Lockheed customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen

Job Number: 9973
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 11/21/2018

Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Supervisor, the Electrical Engineer will be responsible for the planning, design and oversight of the installation, operation and maintenance of electrical components, equipment and systems. They will perform standard engineering assignments usually representing a significant portion of a larger project and will select engineering techniques to solve problems and make design recommendations.

Electrical Engineer participates as a team member in a specific phase of a broad engineering assignment.
Directs preparation of appropriate documentation for assigned projects.
Provides technical leadership to a small group of temporarily assigned engineers and technicians.
Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
Participates in defining engineering approaches, and in planning and scheduling work.
Cover the capacity gaps in documentation for delivery milestones.

Bachelor’s Degree from a four-year college or university and a minimum of five (5) years’ experience

Aircraft electrical design experience
Experience with Catia

Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/02/2018
Last Updated: 01/25/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Engineer

Description:
PDS TECH INC. is seeking Electrical Engineer in Tewksbury, MA

The primary responsibilities will be the development and implementation of test capabilities leveraging a strong working knowledge of test equipment hardware and software technologies. This is an excellent position for a test equipment engineer who has a background in digital test, analog test, RF test, or power supply test and a desire to apply those skills to combined hardware/software test solutions.You will be joining a diverse project team for the design and development of test equipment and test solutions for testing radar, sonar, communication, missile, combat control systems, subsystems and components for various programs within IDS. These products can contain Analog, RF, Microwave, Acoustic, High Power, and Digital Electronic technology and can also have Software (embedded, firmware, Signal Processing, VHDL, etc.). Test Development Engineers are involved from the beginning of product design as a concurrent engineering effort, continuing into supporting engineering design verification testing, production test and final system level verification and sell-off; includes in-plant or field testing. Typical test solutions include simulation, stimulation and data acquisition capability to provide stimulus and response test environments for verifying functional performance. Typical test systems encompass Hardware In the Loop Stimulators, Custom Automatic Test Equipment, Commercial Automatic Test Equipment, High Power, Mixed-Signal, Digital and Environmental Stress Screening systems, mechanical holding fixtures, adapters, and interface cabling and harnessing. .

Basic Qualifications: B.S. in Electrical Engineering or Computer Engineering or B.S. in Electronic Engineering Technology8+ years’ experience in engineering design and development environment with 4+ years direct exposure to Test Equipment Design and Development tasks U.S. Citizenship is required Desired Qualifications: Digital, and/or Analog, and/or RF, and/or power supply test hardware design experienceUse of Commercial Test and Measurement EquipmentVXI/VME/MXI/PXI/CompactPCI Application DevelopmentCMMI and 6 Sigma ExperienceStrong interpersonal and communication skillsGood decision-making and problem-solving skillsExperience with VHDL a plusSoftware applications / programming skills a plusAbility to obtain a security clearanceKeywords: Test Equipment Design and Development, Digital, Analog, RF, power supply test, hardware design, clearance

Job Number: 1810089990
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002miceAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Motor Design Management)

Description:
PDS Tech, Inc. is seeking an Electrical Engineer to manage Motor Design in Windsor Locks, CT.

The ideal candidate will manage a team and provide direction development, design, and testing of electrical components, particularly motors and sensors for manned space applications. This will include extensive supplier technical management.

The ISR & Space Systems business has contributed to significant advances in ground, air, space and imaging technology for over 85 years. Within ISR & Space Systems we design and manufacture Environmental Control and Life Support Systems on the International Space Station, including the space suit, and undersea in submarines.

Project Engineering Supplier Designed Equipment (SDE) Integrated Product Development (IPD) Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities aboard the ORION Program for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the ORION program in Windsor Locks, CT.

The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components by following the SDE Engineering Standard Work processes according to the approved budget and schedule.

Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and UTAS Engineering Change System are a plus. The SDE IPD team lead will report directly to the Program Engineering Manager and Program Managers and will play a critical role in driving project execution while meeting both internal and external customer expectations.

Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. Participation and preparation for monthly program and design reviews with Lockheed Martin are also required.

This position requires creation and delivery of technical presentations to management and customers.

Education / Certifications
•BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
•4+ years leading teams and managing projects

Experience/Qualifications
•Prior experience working with or managing multi-disciplinary teams in a fast paced environment
•Excellent verbal, written and interpersonal communication skills
•Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations) Natural presence/comfortable presenting to internal and external customers
•Demonstrated command of RRCA methodology and tools
•Ability to bring team members together and work problems to resolution
•Ability to work independently and as part of a team
•Proven planning, adaptability, organizational and negotiation skills for effective team management
•Ability to anticipate project risks and build contingency plans
•Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
•Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
•Participate in weekly/monthly reviews with Lockheed customer to communicate status of contracts and schedule.
•Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
•Develop and manage program schedules to drive on-time contract deliveries.
•Participate in contract proposals, including BOE and BOM estimates.
•Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
•Utilize Earned Value methodology to forecast program demands and track project completion.
•Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
•Project Management Professional (PMP) certification is a plus.
•US Citizen

Job Number: 1810093767
Job Location: Windsor Locks, CT
Overtime: yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Software Development) - (Renton)

Description:
Required qualifications:
• Electrical Engineering experience with an emphasis in software development
• Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
• Experience with hardware and software configuration management
• Familiarity with and the ability to program with Visual Basic and C#
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Preferred qualifications:
• Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
• Ability to create and update drawings with Auto Cad and/or Autodesk inventor
• Experience with digital data busses such as ARINC 429/717.
• Experience with aviation connector interfaces and packing such as ARINC 600.
• Knowledge of web design and maintenance
• Experience programming PLCs and HMIs
• Experience with National instruments Lab Windows CVI.
• Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
• Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors
Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: EERenton
Job Location: Renton, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 12/28/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Engineer - AutoCAD

Description:
Cabin Management systems, in-flight entertainment. Military avionics experience may be considered. AutoCAD

Job Number: 18-12794
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 01/09/2019
Last Updated: 02/13/2019

Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Electrical Engineer - Clearance

Description:
PDS Tech is seeking an Electrical Engineer in Tewksbury, MA

The RESP Department is the focal point for receiver, exciter, beam steering, and signal processing technology and is responsible for the design, development, integration, support to production builds, and lifecycle support of IDS products. Hardware Engineers in this position will be responsible for providing design engineering support to the procurement, build, test, integration, and sustainment of IDS products with an emphasis on Radar receiver and exciter subsystems. The technical tasks associated with this position will expose candidates to numerous design disciplines making this position a good growth opportunity for engineers who want to broaden their skillset. Successful candidates are expected to be able to support the resolution of supplier build and test issues, resolve production build, test, and integration problems related to the design of the hardware, and support legacy systems with upgrades and obsolescence redesigns
Required Skills: 4+ years of experience in the field of engineering or related technical disciplines Ability to obtain a Department of Defense Security Clearance within one year of start date Experience in the test and troubleshoot of RF, analog, or mixed signal circuits and systems in both a factory and lab setting Experience working in cross functional teams that include Engineering , Integrated Supply Chain, Operations, and Quality team members Required: This position requires the eligibility to obtain a security clearance. Except in rare circumstances, only U.S. citizens are eligible for a security clearance.

Job Number: 1810090144
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 09/05/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mitBAAQ&URLSource=cjhunter

Electrical Engineer - Clearance

Description:
PDS Tech is seeking an Electrical Engineer in Marlborough, MA
Must have active Secret Clearance
The Power and Electronic Systems Department is responsible for design engineering including the following areas:• Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators• Power Conversion - AC/DC, DC/DC and DC/AC, Linear and Switching Supplies, Power Factor Correction (PFC), Zero Voltage Switching (ZVS), Resonant Circuits, Synchronization, Noise Controls• Power Distribution - Ground, Air, Shipboard, and Space, Power Generation, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems• Power Sub-System Design - Filters, Harmonic Control, EMI, Circuit Simulation, Magnetics, Protective Relay Systems, Short Circuit and Stress Analyses• Control Systems – Servo Control Systems, Motor/Power/Process Control, Digital Feedback Systems, Command Generation, Inertial Stabilization, Navigation Algorithms

Required Skills:• BS in Electrical Engineering or equivalent• 6+ years of related experience• Modeling and simulation using PSPICE, MATLAB/Simulink, or similar computer based tools• Excellent written and verbal communication• Required: This position requires active Secret Clearance.

Job Number: 1810090154
Job Location: Marlborough, MA
Duration: 12 months
Input Date: 09/04/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Michael Accunzo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mitzAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 1-4 - SECRET CLEARANCE REQUIRED

Description:
Multi-position from Associated to Staff level open for Direct Hire Only
All must have an ACTIVE SECRET CLEARANCE
Candidate will be responsible for supporting the design and overall system development of the operational (tactical) electrical subsystems for the PDV and the booster. Knowledge of flight avionics is desired. Engineer will also be responsible for support of systems engineering (compatibility analysis, FFMEA generation, specification development).

FOR MORE DETAILS ON EACH POSITION GO TO www.hi-tecsolutions.com/jobs

Job Number: 256-258
Job Location: multi-locations, AL/CO/PA
Rate: 107K - 226K
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 10/31/2018

Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineers

Description:
Vehicle systems integration

Job Location: OH/MI/IN
Input Date: 01/14/2015

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.

Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 02/14/2019

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Subsystems Lead Engineer

Description:
Seeking an Electrical Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Electrical Power Generation System (EPGS), Electrical Power Distribution System (EPDS), Electrical Wire Interconnection Systems (EWIS) and the Science of Electrical Engineering (G&B, EMC, EMI, HIRF, LSP, etc.). The successful candidate will manage the various electrical systems design and completion partners, as well as all design and certification activity required. The Electrical Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop electrical systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of electrical systems
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Perform electrical systems tests and certification, and provide system and certification documentation
• Manage the electrical subsystem scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Electrical subsystem resources to meet the milestones of the AS2 program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing electrical systems from concept through certification strongly desired

Job Number: 42-004
Job Location: Reno, NV
Rate: DOE, but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 02/06/2019

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analy. Engineers - Many Needed

Description:
Must be degreed & ability to obtain security clearance
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Level 4 & 5

Excellent sign on bonus****

*Email resume to:mmccarthy@pdstech.com

Job Number: BO-OK - 33001-33002
Job Location: Oklahoma City, OK
Rate: $74.00-82.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 12/14/2018

Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Systems Design Engineer 4 - 373544

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Qualification:
─ Electrical Power System >8 years (Required)

Experience:
─ Ability to develop work packages and design concept from statement of work and system requirements.
─ One line, three line AC & DC power architecture and power distributions.
─ Power system load flows, AC 1ph/3ph, and DC load analysis.
─ Equipment proper breaker sizing and wire sizing/voltage drop analysis.

Knowledge:
─ Electrical equipment such as integrate drive generator, auxiliary power unit, generator control unit, current transformer, generator breaker/relays, frequency 400Hz/60Hz converter, voltage AC/DC converters, and other protective devices.
─ Mil-Std-704; DO-160 power quality and FAR 25 FAA Generating Power System.
─ Hand-on test equipment is preferred.
─ Capability to provide leadership, guidance to less experienced engineer team members.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in electrical engineering.

Job Number: 373544
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 09/05/2018
Last Updated: 02/20/2019

Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design Engineer 4 - 373622

Description:
**Secret Clearance Required to Start**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 373622
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 02/20/2019

Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design Engineer 5 - 373623

Description:
**Must be Able to Obtain Secret Clearance**

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 373623
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 02/20/2019

Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems and Equipment (DER)

Description:
Electrical Systems and Equipment Designated Engineering Representative (DER) or Engineering Authorized Representative (EAR) within an Organization Designation Authorization (ODA Unit-member). This person, if not already an EAR within companies ODA will be expected to be qualified to make application to be added to companies Enterprise ODA as an Engineering AR upon being hired into the company. Should be qualified to review engineering data, review and approve test plans and reports, system test witnessing and review/approval of electrical load analysis. Additionally, Major Repair and Alteration approvals will be required of this position under the ODA. Fault Hazard assessment and System Safety assessments are a plus, but not necessarily required. Candidate should aspire to have these added to their list of authorities if not already present.
Electrical Systems and Equipment (DER) works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 yrs. specific technical discipline or 15 yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/20/2018
Last Updated: 01/25/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment.

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes
5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements
8. Ensures that all relevant quality information/feedback is provided
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge:
v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience
v Experience
o 1-3 years of electronics related experience
v Skill Level Required:
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment
o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination
o Willing and able to take and pass basic electronics test

Desired Qualifications:
v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards

Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electrical Technician - (63) - AZ

Description:
Chipton-Ross is seeking 63 Electrical Technician located in Mesa, AZ

RESPONSIBILITIES:
Fabricate, assemble, modify, repair, test, and provide shop support to production and prototype wire harnesses and electrical assemblies. Identify nonconforming detail parts, assemblies and processes. Work with engineering to improve manufacturing processes. Constructs wire harnesses and panels by cutting, sorting, color-coding, measuring, stripping, crimping, soldering, and routing various lengths, types, and gauges of wire, heat-shrink, and other related materials. Installs wire harnesses and components in panels and other assemblies. Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and cutting machines, heat guns, and associated tools. Locates malfunctions and determines type and amount of rework required to repair each unit. Prepares packages for harness fabrication by cutting, labeling, and kitting. Tests wire harnesses, panels, and aircraft electrical systems for continuity and proper functioning. Follows schematics, drawings, and written or verbal instructions to set up and perform duties. Completes paperwork, hardcopy and electronic version, associated with job assignment. Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and nonconformance's issues. Inspect and evaluate materials, components, sub-assemblies, assemblies, tools and product configuration in compliance with requirements, to observe, measure, and record conformity to customer, regulatory and company specifications. Report all non-conformances to manufacturing supervision or corrective action representative. Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required. Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision. Reports job status and restraints to coworkers and supervision.
Identifies production inefficiencies and suggests potential improvements to product or process.

Knowledgeable and skilled in electrical (wire harness) materials, fabrication and assembly methods and common shop practices.
Knowledgeable and able to interpret blueprints, sketches and written and verbal instructions.
Knowledgeable and able to apply shop math.
Knowledgeable and able to use computer systems for office and shop applications.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6 AM - 2:30 PM

MUST BE ABLE TO WORK 1ST OR 2ND SHIFT.

Job Number: 174601
Job Location: Mesa, AZ
Rate: $DOE
Duration: 12 MONTHS
Input Date: 10/17/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Electrical Technician Level 2 - CA

Description:
Chipton-Ross is seeking an Electrical Technician Level 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors

REQUIRED EXPERIENCE:
Experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Monday-Thursday 3:00 pm - 01:30 am
Full-Time

Job Number: 173751
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 09/07/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Vetronics Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electrical/Vetronics Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7229

Join our Engineering team to design and develop Electrical/Vetronic architectures for ground combat vehicles. Your work will entail everything from first concepts, to the development and deployment of these advanced systems. The designs may range from semi-autonomous to fully autonomous capabilities leveraging the latest in industry.

Responsibilities:
• Perform system analysis and derive Electrical/Vetronic Architectures that meet or exceed system requirements
• Concept to production delivery support including design, debug, test, and qualification of design articles
• Design and develop Electrical Components, LRUs and Subsystems for processor, I/O, and display products
• Construct and design new control solution(s), familiarity of design concepts and approaches to motion control and fire control applications
• Perform system, subsystem, & LRU-level requirements analysis as relates to weapon motion control, identifying interfaces & required functionality
• Design, develop, and support circuit design, component selection, procurement, and prototype hardware debug and builds
• Review and develop H/W and S/W requirement documents and test plans

Qualifications:
• Broad based knowledge of electrical systems, system/subsystem, hardware, and software requirements
• Proven and demonstrated experience with integration of electrical / electronic components and associated software/hardware into ground combat vehicles
• Experience with network-based vehicle (combat or automotive) architectures
• Experience trouble shooting Vetronics systems required
• Experience with link-based (e.g., CAN) diagnostic systems required
• Experience with J1939 CAN protocol
• Experience with SIL and vehicle-based Vetronics testing
• Familiarity with TCP/IP and UDP protocol
• Able to use engineering development and test tools
• Strong interpersonal skills and ability to work with interdisciplinary teams
• Strong multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering or related engineering field and 10+ years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7229
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T

Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 02/20/2019

Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer III

Description:
We are seeking an Electro-Mechanical Engineer in Texas! Read below for more information on this position and submit your resume if you qualify!

The ideal candidate for this position will perform the following tasks:
* Responsible for missile harness design and 3D routing and general packaging support.
* Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications.
* Responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices.
* Responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements.

Mandatory Qualifications and Experience:
* Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment.
* Design experience should include electrical cable and/or network design and general electro-mechanical design.
* Must have experience with cabling/harness design.
* Must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers.
* The ability to work with minimal oversight.

Desired Qualifications and Experience:
* Knowledge of company procedures in CAD modeling
* Working knowledge of military and/or industry hardware specifications

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.

Job Number: 129195
Job Location: gr, TX
Duration: 11 mos
Start Date: 11/26/2018
Input Date: 11/02/2018

Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Circuit Designer - 4 / OrCAD PSpice PCB LRU CA

Description:
Electronic Circuit Designer - 4 (Job Number: 18018662)

Number of Openings: 1

Location(s): United States-California-San Diego

Shift: 1st Shift

Target Start Date: Oct 8, 2018

Target End Date: Mar 8, 2019

Pay Rate: $62 to $64/hr

Work Schedule: 9/80A

Duration of Assignment: 3-8-19

Job Description

Qualified applicant to support electronics modernization effort. The SOW include performing detail electrical circuit design, circuit level analysis, support qualification testing, preparing ATP and QTP and support electrical circuit and LRU manufacturing.

Basic Qualifications:

9+ years experience with Electrical Engineering Bachelor’s Degree or an equivalency of 17 years plus High School Diploma.

Experience with OrCAD/pspice

•Experience with PCB troubleshooting
•Experience with PCB layout and routing
•Strong verbal and written communications

Preferred Qualifications:

Working knowledge of engineering practices/procedures regarding electronic components

•Experience with Altium Designer
•Experience with NGC circuit design process
•Experience with TeamCenter

Job Number: MB-1680
Job Location: San Diego, CA
Rate: 64/hr max
Per Diem: no
Duration: 5 months
Input Date: 10/04/2018
Last Updated: 12/12/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Component Engineer (177)

Description:
*This is a full time, 9 month, contract position located in Grand Prairie, TX*

We are seeking an electronics component engineer who will be working on DoD/military component analysis, selection, screening, parts qualification and de-rating of electronic components. Duties will include component material selection, new component release/qualification, handle component related failures, handle component noncompliance issues, able to identify pure-tin and counterfeit part detection.

Required:
*2 years’ experience working as an engineer within the electronics components field.
*Electrical component manufacturing process and physical property analysis experience
*Able to get a security clearance after starting, which requires applicants be US Citizens.
*Engineering degree in material science or equivalent

Pluses:
*Experience in the disposition of Q-Notes.
*Familiar with parts release processes, and formal configuration boards.

Job Number: 177
Job Location: Grand Prairie, TX
Input Date: 01/10/2019
Last Updated: 02/12/2019

Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment.

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes
5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements
8. Ensures that all relevant quality information/feedback is provided
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge:
v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience
v Experience
o 1-3 years of electronics related experience
v Skill Level Required:
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment
o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination
o Willing and able to take and pass basic electronics test

Desired Qualifications:
v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards

Tests and troubleshoots electronic products using standard and specialized test equipment.

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes
5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements
8. Ensures that all relevant quality information/feedback is provided
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge:
v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience
v Experience
o 1-3 years of electronics related experience
v Skill Level Required:
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment
o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination
o Willing and able to take and pass basic electronics test

Desired Qualifications:
v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards

Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer UG/NX NY

Description:
Request number: 5654
Job title: Electronics Packaging Engineer
Number of openings: 1

Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 53
Start Date: 10/22/2018
Tentative End Date: 10/21/2019

Electronics Packaging Engineer

Essential job functions:
This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Education:
BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.

Masters Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience.

Job Number: MB-5654
Job Location: East Aurora, NY
Rate: 53/hr
Per Diem: no
Duration: 12 months
Input Date: 11/05/2018
Last Updated: 11/12/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL.

In your role, you will:

Assemble electrical or electronic systems and support structures.
Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
Hand solder components under a microscope. Fine pitch soldering experience is required.
Use hand tools and work instructions to assemble units according to product specifications.
Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:

Fine pitch soldering experience is required is a plus
5 years experience in electronics assembly preferred.
Must have a High School Diploma or GED
Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

IPC J-STD-001: Soldered Electrical and Electronic Assemblies
IPC-7711/7721: Rework and Repair of Electronic Assemblies
IPC/WHMA-A-620: Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs.

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician / Must have hand soldering experience. Cable harness fabrication and bench work experience preferred TX

Description:
163437
1219-1 Electronics Technician
Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/29/2019
End Date: 7/29/2019

Job Description:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 lbs. These responsibilities will include fabrication of electronic/electrical chassis and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

**Must have hand soldering experience. Cable harness fabrication and bench work experience preferred.

Region: Fort Worth, TX
Level: Level 2: 3+ YRS
Pay Rate: $33.00 Hourly

Job Number: JE-1219-1
Job Location: Fort Worth, TX
Rate: 33/hr max
Per Diem: no
Duration: 6 months
Input Date: 01/15/2019
Last Updated: 01/16/2019

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer IV - Electromagnetic Compatibility - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: ElectroPhysicsOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 01/25/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrophysics Engineer/Scientist

Description:
PDS Tech Inc. is seeking an Electrophysics Engineer/Scientist, at the Oklahoma City, OK.

Summary:

Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
Develops architectures to integrate systems and components into higher level systems and platforms.
Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
Defines and conducts tests to validate performance of designs to requirements.
Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
Writes appropriate sections of proposals to support development of new business.
Works under general direction.

Prerequisites:

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience with Military Programs and/or Commercial Derivative aircraft is highly desired.

Job Number: 1810094694
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/09/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Ysassi
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxvHQAQ&URLSource=cjhunter

Electrophysics Engineer/Scientist

Description:
PDS Tech Inc. is seeking an Electorphysics Engineer/Scientist, in Oklahoma City, OK.

Summary:

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
Develops architectures to integrate complex systems and components into higher level systems and platforms.
Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
Generates major sections of proposals to support development of new business.
Works under minimal direction.

Prerequisites:

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 1810093660
Job Location: OK City, OK
Duration: 6 months
Input Date: 10/17/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Ysassi
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f8BOAAY&URLSource=cjhunter

Electrophysics Engineer/Scientist- Level 3

Description:
PDS Tech Inc. is seeking an Electrophysics Engineer/Scientist, at the Oklahoma City, OK.

Summary:

Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
Develops architectures to integrate systems and components into higher level systems and platforms.
Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
Defines and conducts tests to validate performance of designs to requirements.
Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
Writes appropriate sections of proposals to support development of new business.
Works under general direction.

Prerequisites:

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 1810094690
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2018
Last Updated: 02/20/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxusQAA&URLSource=cjhunter

Electrophysics Engr/Scien 3 - (5) - OK - O/M

Description:
Chipton-Ross is seeking 5 Electrophysics Engineers/Scien 3 located in Oklahoma City, OK

RESPONSIBILITIES:
Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 174946
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/07/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engr/Scien 5 - OK - O/M

Description:
Chipton-Ross is seeking an Electrophysics Engineer/Scien 5 located in Oklahoma City, OK

RESPONSIBILITIES:
Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience with Military Programs and/or Commercial Derivative aircraft is highly desired.

WORK HOURS:
Full-Time/First Shift
8 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 174947
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/07/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Cyber Security Engineer (346)

Description:
*This is a full time, 6-9 month contract, located in Grand Prairie, TX*

We are recruiting for an Embedded Cyber Security Engineer who will be working on a security system that requires validation and certification. Candidate will be working with system security and possible threats/risks throughout the program life cycle. Candidate will also be involved in the heavy paperwork end of the validation process.

The successful applicant will have a good understanding of security certifying and planning including operating systems like Linux, RTOS, and Greenhill.

Required:
*5 years' experience in Embedded Cyber Security and requirements.

*Good understanding of security issues at the board level.
*Experience supporting embedded systems.

*Linux, RTOS, or Greenshill validation experience.

*Experience with RMS, thread assessments, and penetration testing.

*Experience with Validation and certification procedures and paperwork involved.
*4 year degree in Electrical Engineering, or Computer Engineering.

Pluses:
*DoD 8570 approved baseline certification for IAT Level II systems
*Experience in hardware design, software design, penetration testing, encryption, networks, RTOS, cross domain solutions.
*Familiarity with in-vehicle network architecture, modules, and protocols (CAN etc.).
*Experience with Threat Modeling is highly desired

Job Number: 346
Job Location: Dallas, TX
Input Date: 11/01/2018

Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Description/Comment:
Applies technical expertise in the development of C++ software for embedded multi-processor systems. Develops complete software solutions, and influences the successful completion of supported programs and projects. Reviews software products for soundness of technical correctness and adequacy. Produces documentation related to the design and release of software artifacts. Understands and utilizes agile software development methods, automation, and continuous integration, particularly Scrum. Displays initiative and can work well alone or as a member of a team. Follows organizational / program/project processes and procedures. Interacts with senior software personnel through both written and verbal communication.

Required Skills/Experience:
* Minimum of 5 years of experience developing embedded software in C++;
* Experience and knowledge of Linux and Windows computing environments;
* Experience and knowledge of Matlab;
* Hardware/software integrator for real time embedded software;
* Experience with all phases of software development including requirements analysis, implementation, unit test, integration and maintenance;
* Bachelors or Masters Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field;
* DoD Secret clearance is Required.

Desired Skill/Experience:
* Experience developing software using an Agile Software methodology with the Scrum Framework; working well in a dynamic team environment;
* Proficiency utilizing software debugging tools to troubleshoot software implementation and ensure integrity of the software products;
* Understanding of computer architecture and computer hardware optimization techniques;
* Optimization / performance of algorithms in embedded code on hardware and simulation;
* Working knowledge in the build automation tools Make and CMake on both Linux and Windows platforms;
* Working knowledge and experience with configuration management tools, in particular Synergy;
* Parallel programming principles and processes for technical computing environments;
* Experience with unit test frameworks (Google Test), computer in the loop, hardware in the loop and closed loop simulation;
* Excellent written and verbal communication skills;
* Ability to work in an integration lab environment working on software/hardware;
* Experience with Windriver Workbench and VxWorks 6.9.X;
* Experience with TI Code Composer Studio v5.X;
* Experience with Eclipse/CDT integrated development environment

Job Number: AZ45833
Job Location: Tucson, AZ
Per Diem: Possible
Overtime: Possible
Duration: 10 months
Input Date: 11/06/2018

Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer (GEU ECP) - Clearance AZ

Description:
163121 Embedded Software Engineer (GEU ECP)

Work Site Address : Tucson AZ
Job Number: (8500997)
Max Pay Rate: open
Start Date: ASAP
End Date: 24 Months
Position Type: Contract

Applies technical expertise in the development of C software for embedded multi-processor systems. Develops complete software solutions and influences the successful completion of supported programs and projects. Reviews software products for soundness of technical correctness and adequacy. Produces documentation related to the design and release of software artifacts. Understands and utilizes Agile software development methods (including Scrum), automation, and continuous integration. Displays initiative and can work well as a member of a team. Follows organizational/program/project processes and procedures. Interacts with senior software personnel through both written and verbal communication.

Qualifications and Education Requirements
Required Skills/Experience: • Minimum of 5 years of experience developing real-time embedded software in C; • Experience with bare metal system and device driver development & debugging; • Experience with unit & integration test development and execution for real-time embedded software; • Experience with hardware/software integration for real-time embedded software; • Experience with and knowledge of Windows computing environments; • Experience with all phases of software development including requirements analysis, design, implementation, unit test, integration, and maintenance; • Bachelor’s or Master’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field

Preferred Skills
Desired Skill/Experience: • Experience developing software using an Agile Software methodology with the Scrum Framework; working well in a dynamic team environment; • Excellent written and verbal communication skills; • Ability to work in an integration lab environment (computer in the loop / hardware in the loop) executing software/hardware integration activities; • Proficiency utilizing software debugging tools to troubleshoot software implementation and ensure integrity of the software products; • Understanding of embedded computer architecture and computer hardware optimization techniques; • Optimization/performance of algorithms in embedded code on target hardware; • Working knowledge in the build automation tool Make on Windows platforms; • Working knowledge and experience with configuration management tools, in particular Rational Synergy; • Experience with C# for Windows application development; • Experience with Xilinx SDK with softcore processor; • Experience with Microsemi SmartFusion devices; • Experience with Eclipse/CDT integrated development environment

Job Number: MB-R8500997S
Job Location: Tucson, AZ
Rate: open
Per Diem: no
Duration: 24 months
Input Date: 11/01/2018
Last Updated: 12/04/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer (MALD) - Clearance AZ

Description:
162926 Embedded Software Engineer (MALD)

Work Site Address: Tucson AZ
Job Number: 8475092
Start Date: ASAP
End Date: 18-24 Months
Position Type: Contract

The candidate should have recent experience developing software in Ada and C++. Ability to perform software integration and integration in a hardware environment. Ability to perform software requirements analysis and documentation along with creation and/or maintenance of software qualification test cases.
Requirements:
• Bachelor’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field (or equivalent experience);
• Software integrator for real time embedded software;
• Knowledgeable of real-time, embedded architectures;
• Knowledgeable about Ada and C++

Qualifications and Education Requirements
Understanding of standard processes such as change management using Synergy;
• Ability to work closely with other disciplines;
• Experience in agile principles and Scrums;
• Experience in requirement development and software qualification test development;
• Familiarity in cross-compiling Ada and C++

Job Number: MB-R8475092S
Job Location: Tucson, AZ
Rate: open
Per Diem: no
Duration: 18-24 Months
Input Date: 11/05/2018
Last Updated: 12/04/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer (RKV) - Clearance AZ

Description:
163530 Embedded Software Engineer (RKV)

Work Site Address: Tucson AZ
Job Number: 8726133

Start Date: ASAP
End Date: 12-14 Months
Position Type: Contract

Job Summary:
The candidate should have recent experience developing, integrating, and testing software in simulation and hardware environments. Ability to develop, integrate and troubleshoot C/C++ on at least one processor is essential.

Qualifications and Education Requirements
Bachelor’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field (or equivalent experience);
• Hardware/software integrator for real time embedded software;
• Independent problem solver in hardware / troubleshooter;
• Knowledgeable of real-time, embedded architectures;
• Knowledgeable in C/C++ programming constructs;
• Able to handle low-level jobs related to programming plates on a guidance stack.

Preferred Skills
Understanding of standard processes such as change management using RTC;
• Knowledge of 1553 is desired;
• Able to participate and possibly lead a software development and qualification efforts;
• Work closely with other disciplines, the Chief Engineer's office, the program office, and the customer community;
• Experience using troubleshooting tools such as digital analyzers, oscilloscopes, bus analyzers, etc.

Job Number: MB-R8726133S
Job Location: Tucson, AZ
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 11/12/2018
Last Updated: 12/04/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software/Hardware Test Engineer (743)

Description:
CSS Staffing is seeking a Embedded Software/Hardware Test Engineer who will be responsible for integration and testing of embedded software and hardware components in the lab and in military vehicles. As an extension to this work, the candidate may be asked to develop and maintain software tools and simulations necessary to support the system, diagnose software/hardware defects, validate software fixes, and determine the root cause of a system failure. Design and implement simulations/emulations in Matlab/Simulink and National Instruments VeriStand/LabVIEW to run on an NI PXI controller. Support low level software integration activities as well as higher level systems integration and build-up of the actual prototype vehicles. Design and implement tools to support activities across all levels of integration. Review system requirements and use cases, performance specifications, and interface design documents. Support test case design and implementation in National Instruments TestStand.

Required Skills

*5+ years” experience with embedded software and hardware development or testing

*Development experience using C++ and/or Java

*Experience with Linux/Unix Operating System

*Experience with scripting languages (i.e. Bash, Perl, Python)

*Experience with configuration management tools (i.e. Git, SVN, ClearCase, etc.)

*Systems and Software requirements analysis (including requirement writing, and specification generation)

*Experience with Matlab and Simulink

*BS Degree in Electrical/Computer Engineering, Computer Science, or related field.

Desired Skills

*Knowledge of vehicle communication busses (Ethernet, CAN, RS-232) and their protocols

*Experience with Ethernet and CANbus troubleshooting

*Experience with National Instruments’ products including Labview, VeriStand, & TestStand

*Experience supporting, implementing, and/or designing high fidelity software simulation models for SIL, HIL, & Real-Time test environments. (Simulink Preferred)

*Experience generating and writing supporting documents such as test system software requirements, user manuals / tools documentation, and software validation documents

Job Number: 743
Job Location: San Jose, CA
Input Date: 11/01/2018

Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Employee Development Spec 3

Description:
Employee Development Spec 3

Location: Everett, WA
Duration: 6 Months

Job Description:
Conducts learning requirements analysis and establishes learning objectives. Designs and develops course content and instructional materials. Tests delivery environment and establishes system access requirements. Delivers content and assesses effectiveness based on learning objectives. Conducts customer workplace coaching sessions to improve individual or group performance. Deploys development tools and monitors implementation and performance outcomes.
Education / Experience:
Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

Skills:
- Must have experience in the field of aircraft sealing. Must be knowledgeable of sealing applications such as fay, cap seal, fillet, and fuel tank sealing.
- Experience in Electrical systems/Fiber Optics is required. Must have working knowledge and work experience in the areas of Fiber Optics routing and installing, examining/cleaning/inspection, light loss testing, electrical routing, crimping, connectors, and soldering.
- Experience in oxygen and plumbing systems is required. Must have working knowledge and work experience with oxygen systems, oxygen bottles, tubing, couplings, and pressure testing systems.

Skill Code: F31-Delivery and Facilitation

Please share updated resume at ravi@iconma.com if interested.

Job Number: 18-12521
Job Location: Everett,, WA
Per Diem: Available
Input Date: 10/22/2018
Last Updated: 11/01/2018

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electrical

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineer Electrical
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7181

Responsibilities:
• Lead, design and develop specialized test tools and data collection software programs
• Verify and validate functional performance of hardware to meet engineering development, regression testing, government witness testing, and independent software tests in compliance with design requirements.
• Work with a group of lab Design & Development engineers guiding them through procedures on how the test system operates.
• Design other tools to support Power Testing, Real-Time Operational Testing, CAN / 1553 / GbE / UBIM Testing, User friendly LabVIEW application S/W to control VXI, PXI, PCI, and GbE instruments, GO, NO-GO and Failure Area indicators, Electronic Personality Interface Adapters and high density common interfaces for quick change of LRUs on test console.
• Measurement repeatability, matched data storage by part number and serial number, Tests capability for Electronic and Electro-Optical LRUs and subsystems
• Support Abrams and Stryker production test equipment and product validation
• Support and maintain laboratory conventional and computerized test equipment. At a minimum this includes selection, direction for procurement, configuration activities, and periodic / preventative maintenance, repair, and calibration of test assets on and off sites.
• Design electronic circuits, functions, and sub-systems necessary to evaluate and test products at the sub-system and system level. Includes analog and digital circuits, voltage translation, switching functions, interconnect cables, monitor panels, test boxes, and ensure design include proper grounding and shielding principles to minimize test system and interface effect on test samples.
• Provide documentation for designs, processes & procedures.
• Participate in design reviews offering constructive criticism to ensure sound designs are implemented, and placement of documents into configuration management system.
• About 20% travel time

Qualifications:
• Problem solving skills to investigate and expedite corrections to field and production issues
• Capable of operating Test Instrumentation, including Oscilloscopes, DMMs, Function Generators, and DAQs, and interpreting measurements.
• Experience developing software code, such as Visual Basic, C++, LabVIEW Experience developing electronic circuits and cables
• Experience developing electronic schematic drawings Skilled in troubleshooting electronic circuits
• Experience developing test code/scripts to control NI Data Acquisition modules is a plus.
• Must have good computer skills (email, MS-Office, internet)
• Able and willing to travel domestically, and internationally
• Able and willing to work occasional overtime and/or 2nd-shift to meet deadlines
• Good verbal and writing skills in English preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree in Electrical or Electronics Engineering, or Computer Engineering with a minimum of 1-3 years’ experience preferred.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7181
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Fire Control Tracked Combat

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineer Fire Control Tracked Combat
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7228

Responsibilities:
• Design engineer with emphasis on system and subsystem integration and test.
• Review and develop hardware and software requirement documents and test plans.
• Support hardware and software integration in a lab environment to include the use of various test equipment to include dynamic analyzers, oscilloscopes, logic analyzers, Ethernet, RS-422, etc.
• Perform vehicle level testing utilizing the same type of equipment.
• Analyze subsystem requirements and develop logic for flowcharts, state charts, state diagrams, and fire control algorithms for design documents.
• Support fielding and production sites to investigate / resolve fire control issues.
• Support integration and testing of electrical control devices and sensors on various vehicle platforms.
• Provide technical support and communication as required to program office, customers, and other departments.
• Occasional travel to field sites required 20% of the time

Qualifications:
• Required – able to obtain Secret clearance.
• Extensive vehicle and lab testing required
• Must meet ASR requirements to work inside tanks and military vehicles
• Extensive use of computer and test equipment in both the laboratory and field environment
• Good communication skills required
• Must be capable of working in a team environment
• Occasionally must lift and carry test equipment weighing 30 lbs
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree required.
• Electrical Engineering preferred, similar technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7228
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Hardware 5 - Clearance MD

Description:
163513 Engineer Hardware 5 (Job Number: 18023227)

Number of Openings: 1

Location(s): United States-Maryland-Patuxent River

Shift: Multiple

Target Start Date: Nov 5, 2018

Target End Date: Nov 1, 2019

Pay rate: $70 - $75

Work schedule: 9/80 Multiple shifts**

Duration: Up to 1 year

Location: Patuxent River, MD

Instrumentation and Data Systems engineer responsible for the development, design and maintenance of complex instrumentation and data system solutions for laboratory, ground and flight test activities on the various flight test programs. Maintain Flight Test Instrumentation system configurations and coordinate test activity, maintenance and communicate instrumentation issues and status across teams. Support planning and flight test readiness reviews; flight test planning working groups and coordination meetings; pre and post test briefings. Define data system configurations, sensor selection, installation, checkout requirements and operational procedures. Define air vehicle interface, integration and logistic requirements. Knowledge of telemetry, onboard recording, Data Acquisition Systems (Teletronics and Acra) and ground stations. Provide test crews, manufacturing and/or suppliers the guidance and direction required for operation, fabrication, modifications, assembly and checkout of Instrumentation systems and associated equipment. Experience in computer operating systems and application software (AutoCAD), as well as database development for measurand and test data. Prepare system specifications, Request for Quotes (RFQ’s) and Statement of Work (SOW’s) that satisfy test and system requirements. Support test activities, anomaly resolution and process improvement initiatives. Must have strong leadership, communication and interpersonal skills. Multiple shift work may be required. Travel required to multiple NGC and customer facilities.

Basic Qualifications: BS degree in Science Technology Engineering or Math (STEM) plus 14 to 19 years related experience.

Preferred Qualifications: BS degree in Electrical Engineering with 14+ years of aircraft instrumentation experience is preferred. Exp with Instrumentation systems to include Teletronics (TTC / Teletronics Technology Company) or Acra.

Job Number: MB-1692S
Job Location: Patuxent River, MD
Rate: 70-75/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/20/2018

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer III / Proficiency with RTCA/DO-178B development and verification / expert-level fluency in ANSI C and assembly / expertise with low-level software including device drivers, interrupt service routines CA

Description:
Engineer III

Work Site Address: Irvine, CA 92618
Job Number: 5962
Max Pay Rate: 60-65/hr max
12 months

2 openings

Roles and Responsibilities

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Qualifications and Education Requirements
· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

Preferred Skills
Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

Job Number: JK-5962
Job Location: Irvine, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 02/19/2019

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Engineer, EEE Parts and Radiation -

Description:
Chipton-Ross is seeking a Senior Engineer, EEE Parts and Radiation for an opening in Redmond, WA.

RESPONSIBILITIES:
In this position, you will play a key role in the component engineering group supporting new andexisting spacecraft propulsion programs. Proficiency in radiation effects, survivability engineeringdesign, and test methods used to assure electronic components are compatible with operation inspace radiation environments expected.
50% - Provide Radiation Analysis expertise. Assess customer radiation requirements and develop derived radiation requirements for EEEparts. Create models to assess radiation risk of EEE parts. Generate and submit radiation risk assessment reports. Support radiation risk mitigation efforts. Evaluate new devices for radiation performance. Develop radiation test plans at the EEE part level and support test execution.25% - Support design teams in the selection, evaluation, and documentation of EEE parts. Create detailed part drawings which meet customer requirements. Review parts lists and ensure selected parts comply with customer requirements. Generate Non-Standard Part Approval Requests (NSPARs).15% - Lead investigations of failed components. Use industry standard failure investigation processes to determine root cause of failures. Generate failure investigation reports and recommend effective corrective actions to preventrecurrence of failure.10% - Mentor junior team members.

REQUIRED EXPERIENCE:
Advanced knowledge of semiconductor physics, radiation effects on semiconductor devices,circuit design, and electronics testing. Knowledge of radiation effects (TID, ELDRS, SEE). Experience with radiation effects simulation software. Advanced knowledge of applicable industry practices and standards in EEE parts and radiationeffects. Experience with formal problem solving and failure analysis tools and techniques. Experience working an equivalent engineering environment is desired.

EDUCATION:
Accredited Bachelor's degree in Electrical Engineering, Physics or related field and 5 years of related experience (or an equivalent combination of education and experience).

WORK HOURS:
9/80
Full-Time

Job Number: 174480
Job Location: Redmond, WA
Rate: $DOE
Duration: Direct
Input Date: 10/12/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Engineer, EEE Parts and Radiation - CA

Description:
Chipton-Ross is seeking a Senior Engineer, EEE Parts and Radiation for an opening in Canoga Park, CA.

RESPONSIBILITIES:
In this role, you will play a key role in the component engineering group supporting new and existing spacecraft propulsion programs. Proficiency in radiation effects, survivability engineeringdesign, and test methods used to assure electronic components are compatible with operation inspace radiation environments expected.
50% - Provide Radiation Analysis expertise. Assess customer radiation requirements and develop derived radiation requirements for EEEparts. Create models to assess radiation risk of EEE parts. Generate and submit radiation risk assessment reports. Support radiation risk mitigation efforts. Evaluate new devices for radiation performance. Develop radiation test plans at the EEE part level and support test execution.25% - Support design teams in the selection, evaluation, and documentation of EEE parts. Create detailed part drawings which meet customer requirements. Review parts lists and ensure selected parts comply with customer requirements. Generate Non-Standard Part Approval Requests (NSPARs).15% - Lead investigations of failed components. Use industry standard failure investigation processes to determine root cause of failures. Generate failure investigation reports and recommend effective corrective actions to preventrecurrence of failure.10% - Mentor junior team members.

REQUIRED EXPERIENCE:
Advanced knowledge of semiconductor physics, radiation effects on semiconductor devices,circuit design, and electronics testing. Knowledge of radiation effects (TID, ELDRS, SEE). Experience with radiation effects simulation software. Advanced knowledge of applicable industry practices and standards in EEE parts and radiationeffects. Experience with formal problem solving and failure analysis tools and techniques. Experience working an equivalent engineering environment is desired.

EDUCATION:
Accredited Bachelor's degree in Electrical Engineering, Physics or related field and 5 years of related experience (or an equivalent combination of education and experience).

WORK HOURS:
9/80
Full-Time

Job Number: 174481
Job Location: Canoga Park, CA
Rate: $DOE
Duration: Direct
Input Date: 10/12/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Specialist Tracked Fire Control

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineering Specialist Tracked Fire Control
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7198

Responsibilities:
• Develop NXP microcontroller software using S32K Design Studio IDE to interface with motor drivers, positional sensors, and other sensors using SPI, I2C, SPI like interfaces, EIA-422/485, and other serial interfaces
• Design Control Systems for small motors used to control actuators with positional and/or encoder feedback.
• Develop Graphical User Interfaces (GUIs) using Visual Studio for engineering testing applications and simulations.
• Support circuit card and/or electronic designs including component selection, procurement, and oversight of hardware/software build.
• Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
• Support circuit board specifications, ICDs, and test plans.
• Review and develop hardware and software requirement documents and test plans.
• Design utilizing high and low speed digital communications standards such as: EIA-422/482, EIA-232, USB, SPI, I2C, CAN, TCP/IP, SPI like interfaces, and other serial interfaces.
• Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
• Support integration & test of electrical control devices, sights, and sensors on various vehicle platforms.
• Work with other members of the engineering staff to ensure the product meets its requirements.
• Prepare and present written reports, status reports, and presentations as necessary.
• Provide technical support and communication to the company program office, customers, and internal departments.
• About 10% travel

Qualifications:
• More than 5 years of applicable experience programming microcontrollers (NXP preferred)
• Experience with NXP Microcontrollers preferred S32K series
• Experience with NXP S32K Design Studio IDE
• Experience with C & C# programming languages
• Experience with interfacing with EIA-422/482, EIA-232, USB, SPI, I2C, CAN, TCP/IP, SPI like interfaces, and other serial interfaces
• Experience with Control Systems for small motors used to control actuators with positional and/or encoder feedback using a microcontroller
• Experience with analog and digital video circuit design (RS-170, HD-SDI, LVDS, DVI, DisplayPort) preferred
• Experience with video distribution techniques preferred
• Experience with Gigabit/10 Gig Ethernet, GigEVision, and Ethernet AVB preferred
• Experience with Microsoft Office and Microsoft Visual Studio 2013 or later
• Familiarity with Military Standards and test requirements
• Able to use engineering development and Tools
• Capable of Obtaining a Security Clearance preferred
• Occasional overtime, and weekend hours may be required to complete critical tasks
• Strong Interpersonal skills and ability to work with interdisciplinary teams
• Strong Multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• More than 10 Years of applicable experience with a Bachelor’s Degree in Electrical Engineering or Computer Engineering. Other technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2018-7198
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 11/08/2018

Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Mechanical Design Engineer Creo (202)

Description:
This is a full time, 1 year contract located in York, PA*

We are recruiting for an entry level contract Mechanical Design Engineer who has fundamental knowledge of aerospace/DoD mechanical designing using Pro/E Creo.

Much of the work may be in mechanical and parts design, preparing items for machining and fabrication, welding, and assembly. A good knowledge of manufacturing processes will be used daily on manufacturing site.

Required:

*1-2 years’ experience in military/aerospace mechanical design using Pro/E Creo.
*Familiar with GD&T (ASME 14.5-2009)

*Able to work with some electrical as well as mechanical parts

*Able to work with Excel and creating large spreadsheets.

*Experience creating and reading engineering drawings, schematics.
*4 year engineering degree, or 4-5 years designing experience in lieu of degree

Pluses:

*Vehicle designing experience a plus

Job Number: 202
Job Location: York, PA
Input Date: 11/01/2018

Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Renton, WA
Duration: 6 months

Description:
Required qualifications:
- Electrical Engineering experience with an emphasis in software development
- Experience working with two or more of the following: web application development, mobile application development, object-oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
- Experience with hardware and software configuration management
- Familiarity with and the ability to program with Visual Basic and C#

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Preferred qualifications:
- Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
- Ability to create and update drawings with Auto Cad and/or Autodesk inventor
- Experience with digital data busses such as ARINC 429/717.
- Experience with aviation connector interfaces and packing such as ARINC 600.
- Knowledge of web design and maintenance
- Experience programming PLCs and HMIs
- Experience with National instruments Lab Windows CVI.
- Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
- Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors

Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Skill Code:
66U-Designer Engineer.

Please share updated resume at ravi@iconma.com if interested.

Job Number: 18-17824
Job Location: Renton,, WA
Per Diem: Available
Input Date: 10/23/2018
Last Updated: 11/01/2018

Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Equipment & Tool Engineer 3 (4) - WA

Description:
Chipton-Ross is seeking 4 Equipment & Tool Engineer 3's located in Renton, WA.

RESPONSIBILITIES/REQUIRED EXPERIENCE:
�Electrical Engineering experience with an emphasis in software development
�Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
�Experience with hardware and software configuration management
�Familiarity with and the ability to program with Visual Basic and C#.

PREFERRED EXPERIENCE:
� Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
� Ability to create and update drawings with Auto Cad and/or Autodesk inventor
� Experience with digital data busses such as ARINC 429/717.
� Experience with aviation connector interfaces and packing such as ARINC 600.
� Knowledge of web design and maintenance
� Experience programming PLCs and HMIs
� Experience with National instruments Lab Windows CVI.
� Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
�Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:30 AM - 3:00 AM

Job Number: 174675
Job Location: Renton, WA
Rate: $DOE
Duration: 6 Months
Input Date: 10/22/2018
Last Updated: 02/20/2019

Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer II - (Sylmar, CA)

Description:
- Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite. Also
design and update searchlight and high intensity illumination products for solar cell and solar panel test in AutoCAD /
Inventor Pro Suite.
- Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing
efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring
lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others.
Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
- Work with Illuminations Systems Product Engineers to generate and update part and assembly documentation needed
for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and
model management in VAULT.
Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely
build and test the hardware in conformance with customer requirements. Generate tooling procurement and assembly
drawings and models using AutoCAD/Inventor Pro Suite.
- Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess
customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or
manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT
principles to all generated and reviewed deliverable hardware and manufacturing/support tool designs.
- Apply GD&T principles to assure manufacturability for internally built assemblies and to help resolve procurement
issues.
- Use Finite Element Analysis to support new design development and Root Cause investigations. Use Inventor CFD tool
to assess thermal and mechanical stress on deliverable hardware and to assess factors of safety for assembly/ground
support tooling.
- Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass
analysis, magnetic moment analysis, and detailed design descriptions for internal and customer review packages. Learn
to perform radiation and power analysis and to generate handling procedures and hardware test reports to backfill as
needed during periods of high volume activity.
Qualifications - Internal
Basic Qualifications
- Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Familiarity with AutoDesk Vault
- Demonstrated working knowledge of basic GD&T principles
- Working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis package
(including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
- Ability to read/generate electrical schematics
- Experience with PCBs or other electronics packaging and wiring design
- Ability to communicate effectively with a diverse group of both internal and external customers and colleague
Preferred Knowledge / Skills
- Familiarity with VBA, SQL, or Labview
- Familiarity with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques,
PCBs and electronics, FEA and FMECA analysis techniques
- Ability to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using
MS Word
Typical Education / Experience
Degree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's
degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in
engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required,
accreditation standard.

Job Number: EquipToolECA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
The FPGA Engineer will perform the following:
• Thorough understanding of VHDL, the FPGA design process and the tools used to generate the FPGA designs.
• Understand the requirements, architect a solution targeting an FPGA against those requirements and implement that solution in an FPGA.
• Lead a small team of designers in generating the FPGA design solutions.
• Simulate the FPGA to verify performance, then integrate and test the FPGA on the circuit card assembly
• Full life cycle development and integration of VHDL into different families of FPGAs.
Required Experience
• Bachelors’ Degree in Electrical Engineering with a minimum of 6 years of relevant work experience • Or a Masters' Degree with a minimum of 4 years of relevant work experience
Desired Skills
• Experience with high speed memory interfaces. • Experience with high speed serial protocols (PCI Express, SRIO, Ethernet). • Experience with Analog to Digital (AD) and Digital to Analog (DA) interfaces. • Experience with control protocols such I2C, SPI, RS-232/422, and SpaceWire. • Self-motivated individual with the ability to work and communicate effectively within a development group. • Ability to work in a team environment and negotiate solutions with Hardware / Software Engineering and Systems Engineering is preferred. • Proficiency with Xilinx, Microsemi, and Altera Tool Suites (VHDL, Synthesis, Place and Route, Simulation, Timing Analysis).

Job Number: 45881
Job Location: Melbourne, FL
Duration: 12 months
Start Date: ASAP
Input Date: 11/08/2018

Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Field Technician Engineering Support

Description:
Do you enjoy traveling? If so, join our team! Nesco Resource is seeking a Field Tech Engineering Support for our client in Ypsilanti, MI.

As a Field Tech Engineering Support you will be responsible for successful installation, start-up, and training.

Job Description

Install, start-up, troubleshoot, debug, and train internal and external clients.

Demonstrate strong communication with clients through the use of SOP documents.

Test, inspect, and assemble parts to ensure they meet specifications and standards.

Diagnose errors or technical problems and determine a solution with management.

Document and follow company policies and procedures.

Prepare assembly by drilling, taping holes and cutting materials according to the schematics.

Connect, attach, and test electrical wiring cables and piping systems.

Requirements

Must have a minimum of five years’ experience.

Ability to work overtime as required.

Computer knowledge with Microsoft Suite experience.

Blueprint and Schematics reading required.

Low Voltage Electrical and Controls experience required.

Travel is mandatory up to 20 weeks per year.

Passport is required or be eligible.

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Number: 18-45901
Job Location: Ypsilanti, MI
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-10-29 00:00:00.0
Input Date: 10/29/2018
Last Updated: 11/14/2018

Firm Name: NESCO RESOURCE
Attention: Cynthia Clarey
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System Engineer

Description:
Role Description:

We are searching for a talented person to fill a Flight Control Engineer position located here in Moses Lake, WA. The strategic purpose of the Flight Sciences Group, and the Engineering Services Unit, is to provide engineering consulting services related to aircraft performance.

Job Duties and Responsibilities:

Review and support Certification activities.
Certification Plans.
Component Qualification Test Plans.
Similarity Analysis Reports.
Safety and Particular Risk Analysis.
Design Reviews.
Support flight testing activities.
Test Specification Definition.
Test planning and preparation activities.
Pre and Post Flight Briefing Support.
Live monitoring of flight data, typically via telemetry, exceptionally on aircraft.
Post flight data processing, analysis, and drawing conclusions.
Troubleshooting of aircraft snags, root cause determination and appropriate engineering disposition for way forward.
Appropriate disposition of non-conformances, quality escapes etc.
Safety of Flight determination.
Documentation of design problems for long term fix.
Release of engineering documentation for component changes and new installations, ensuring appropriate configuration control.
Generation and review of appropriate limitations documentation.
Flight Test Report Writing.

Requirements
Knowledge/Skills/Abilities

Intermediate knowledge of flight test operations and flight certification.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Able to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical and troubleshooting skills as well as decision-making skills.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Strong communication skills (oral, written, presentation) with both external and internal customers:
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees.
Able to publicly represent the organization to people who inquire about our company, our mission and our products (straight-forward, believable).
Strong project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Proficiency with Microsoft Project and/or other project planning software. Able to quickly learn new software and systems.
Software programming
Education

Four (4) year degree in Engineering (Electrical, Aerospace, Instrumentation, Avionics).
Experience

3-8 years relevant aerospace engineering experience

Job Location: Moses Lake, WA
Input Date: 07/17/2018
Last Updated: 12/13/2018

Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Claderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls and Simulation Engineer

Description:
Flight Controls and Simulation Engineer

As a Flight Controls and Simulation Engineer, your role will be to design and implement flight control, estimation, and simulation software for an unconventional autonomous vehicle. You will be involved in all stages of development — from dynamic modeling and sub-scale testing, to designing complex control systems, analyzing their robustness and performance, and validating them in simulation and on full-scale aircraft.
You have a passion for self-piloted aircraft. You have an in-depth understanding of fixed-wing and rotorcraft flight dynamics, and of classical and modern flight control techniques. You have designed, analyzed, implemented, and tested complex — yet elegant — multi-level controller architectures, and successfully deployed them in the real world. You have built high-fidelity 6DOF simulations for software-in-the-loop and hardware-in-the-loop testing.
You have a strong mathematical background, with an emphasis on linear algebra, estimation, and optimization. You have used your talents in applied control theory to contribute meaningfully to the design, analysis, and flight testing of one or more operational aircraft. You are familiar with model-based design techniques, and how they are deployed within the constraints of safety-critical embedded systems. You have working familiarity with the principles of software engineering, and have some experience with application level software deployment, testing, and debugging.
As our projects are “out-of-the-box” by design, you will be expected to seek, investigate, and implement creative solutions to challenges and impediments, and skillfully pivot when needed, with minimum loss of momentum. We expect you to do this with equal parts technical intuition and rigorous by-the-book protocol.
To get specific, your responsibilities will be to:
Design and implement flight control, navigation, guidance, estimation, and simulation software for unconventional aircraft
Effectively communicate your designs, analysis, and engineering intent with the rest of the engineering team and partners
Assist the engineering and flight testing team as required

Qualifications:
A Master’s or Doctorate degree in Aeronautical, Mechanical, Electrical, or Software Engineering
At least five years of progressively ambitious experience in the area of vehicle dynamics, controls, and simulation
Expert level knowledge of MATLAB, Simulink, and associated workflows
Experience with C, C++, or another compiled/systems language and Python or another interpreted language
Experience with typical airborne sensors: IMUs, GPS, Air Data, Lidar, etc
A strong mathematical background
Excellent communication skills
An aptitude for working in small teams, with the ability to take a leading role in your area(s) of specialty and readiness to work across disciplines where appropriate

The Structures Company is an AA/EOE.

Job Number: 236
Job Location: ORE
Rate: DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 12/01/2018

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Job Search Results

Listings 1 - 619