Job Search Results

133 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/04/09 Thursday 03:53AM Pacific Time by ContractJobHunter. )

Listings 1 - 133

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Process Engineer

Description:
The Airframe Process Engineer is required for 1st, or split shift (1st to 2nd, flexible hours) to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning.

The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.

Primary responsibilities include:
• Manufacturing Engineering support of Black Hawk build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications.
• Reviewing, signing off, creating and implementing PCAS for EC changes,
• Issuing SAP notifications to create new tooling
• Performing process validations.

The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools. The candidate must be flexible highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.

This position reports to Process Engineering Black Hawk Lead

This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment. Good communication skills are required.

Requirements:
• 5+ years of Airframe Process Engineering
• Proficiency in all processes associated with Airframe Process Engineering.
• Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP
• Candidate must be flexible in regard to work schedule and willing to support weekends.
• BS in Mechanical Engineering, Aerospace or Manufacturing Engineering
 
Job Number: 1910107005
Job Location: Bridgeport, CT
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 02/07/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer- Mechanical Systems

Description:
Associate Engineer- Mechanical Systems

Job ID # 2020-10846

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree



What You’ll Do:
•Design, develop and release system, subsystem componentry, component mounting brackets or provisions for various vehicle systems, subsystems devices.

What You’ll Need:
•Perform preliminary design and analysis
•Work in an Integrated Product Team environment and be able to communicate across functional organizations
•Trouble shooting vehicle subsystems
•Performing failure analysis & be able to provide technical direction for corrective action solutions
•Write technical reports & modification instructions
•Pro Engineering (Pro E) modeling
•A working knowledge of Microsoft Office applications is required
•Working knowledge of basic bracketry design required
•Knowledge of hydraulics, pneumatics, fire extinguishing systems and shock isolation mechanisms preferred
•Must have strong mathematical and problem solving skills
•Must have CAD software experience in CREO and/or UG NX
•Must have strong communication skills and the ability to interact will all organizational levels
•Able to work with design services to create detailed drawings and provide technical support for concurrent engineering
•Able to support procurement and on site prototype build/integration activities and resolve issue
•Able to read technical drawings and perform tolerance stacks. Working knowledge of GDT is a plus.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree required.
•Degree in Mechanical Engineering / related technical discipline preferred.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10846
Job Location: Sterling Heights, MI
Input Date: 02/10/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Specialist

Description:
We have an Excellent Contract position for a Design Specialist to join a leading Company located in the York, PA area.
** Position requires U.S Citizenship.

Job Responsibilities:
Creates innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity.
Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications.
Ensures designs are free of layout process defects.
May assist engineers with defining design standards and configurations.
Applies Computer-Aided Design (CAD-UG NX11) methodologies, theories, and techniques.
Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions.
Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.
Develops innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs by utilizing sound design principles and practices.
Prepares moderately complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of component(s) or a portion of a functional system to satisfy system and integration requirements within cost and producibility constraints.
Prepares drawing packages to military or equivalent ASME standards.
Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures the accuracy of calculations and dimensions.
Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates the integration of equipment.
Performs and documents technical calculations such as design evaluations, tolerance studies, mass and section properties, static and dynamic loading.
Identifies assembly interference, design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design.
Interfaces with various internal customers to solve moderately complex technical problems.
May interface with external customers to solve moderately complex technical problems.

Experience Required:
Associate Degree with an emphasis in engineering drafting/design or an equivalent combination of training and experience; plus, a minimum of six additional years drafting and design experience, including a minimum of two years design work.
Must be skilled in the creation of model-centric models and drawings utilizing UG NX11. Creo 4 is a plus.

Experience Preferred:
Experience with relevant applications in a defense environment.
 
Job Number: 39663
Job Location: York, PA
Rate: 38.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 02/20/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafting Technician

Description:
Designer/Drafting Technician

Job ID # 2020-10822

Direct Hire Opportunity

Location: Marion, VA

Industry: Defense

Clearance Requirement: Ability to Obtain Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 2 years



What You’ll Do:
•Work in a cross functional team environment to design products to meet our customer requirements
•Work with Mechanical Design Engineers to design and create 3D models/2D drawings of product designs
•Create Catia CAD 3D models, 3D MBD associated data, and / or 2D drawing package
•Preform Tolerance stack analysis
•Work with Tool Engineers to design and create 3D models/2D drawings of tooling components required to build product. Experience in both metal and composite tooling.
•Support build processes on our shop floor
•Assist in trouble shooting issues that arise in a production environment
•Attend and present at technical design review meetings both internal, and with customer participation



What You’ll Need:
•Active security clearance is preferred, ability to obtain required.
•Proficiency in the use of Catia V5 CAD System (3D solid modeling, 3D MBD, 2D drafting, assembly design, composite design)
•Proficiency in ANSI Y-14.4 dimensioning and Geometric Dimensioning and Tolerance (GD&T)
•Experience working in the aerospace composites industry
•Experience working in a cross-functional team throughout the design life-cycle
•Ability to balance multiple priorities / tasks within given time constraints
•Experience in aerospace tool design would be a benefit
•Experience in working with a PDM system would be considered a benefit
•Exhibits a good company image, work ethic, and professional conduct
•Fluent in Microsoft Office tool suite
•Preferred:◦Strong mechanical background
◦Create Catia 3D composite models specifying all plies and creating subsequent 2D flat patterns for nesting
◦Create 3D PDF files from the Catia 3D model




*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree combined with 2+ years of relevant work experience; or Master’s degree.



A Relocation Package may be available to qualified individuals.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10822
Job Location: Marion, VA
Input Date: 02/06/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/04/2020
Last Updated: 03/30/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Electrical Engineer

Description:
PDS Tech is seeking an Electrical Engineer, in Florence, SC.

Summary:

  • Responsible for wiring diagram creation and maintenance, as well as controller and field wiring design.
  • Utilize knowledge of power components, distribution and protection, and controls theory and application.
  • Provide product support for a variety of electronic elevator components and electrical systems.
  • Must possess at least a bachelor's or its equivalent in Electrical Engineering and at least five years of work experience in an Electrical Engineering field. In the alternative, at least a master's or its equivalent in Electrical Engineering and at least three years of work experience in an Electrical Engineering field would be acceptable.
  • Must also possess the following: working knowledge of power distribution, protection and control systems; experience with electrical codes and standards, understanding of power components, distribution and protection, controls theory and application; electrical engineering background with wiring diagrams, system analysis, motor and control applications; experience with ECAD tools such as Cadence, PSpice, ViewLogic, AutoCad, E3; experience working across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel; understanding of PCB assembly and other manufacturing processes; and experience with test and measurement equipment. Any suitable combination of education/training and/or experience would be acceptable.


 
Job Number: 1910097443
Job Location: Florence, SC
Duration: 12 months
Input Date: 12/10/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r8aGQAQ&URLSource=cjhunter

Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/19/2019
Last Updated: 04/08/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Engineer

Description:
*This is a full time, 1 year contract position located in York, PA*

*Alternate locations available to work from, Minneapolis or San Jose*

*Per diem split is available for out of the area applicants*



We are seeking a contract Electrical Engineer specializing in vehicle electronics and wire harness designing. We are working on optimizing the design the wiring harnesses and cable assemblies which will integrated into military ground vehicles, such as tanks and armored personnel carriers.



Daily duties will consist of specifying/design of components from requirements and work on through modeling, simulation and analysis or test that requirements are met. Will work on creating engineering documentation (specs, ICDs, design documents, and technical/test reports) and complete technical data packages. Handle cost estimating, scheduling assigned electrical design projects; work on ECOs and change proposals as well as monitoring to ensure manufacturing, and delivery of components schedules are met. Applicant will assist drafters / designers in creating clear and releasable documents.



Required:
*3 years’ experience designing electrical & wire harnesses systems for military vehicles.
*Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
*Understanding of military electrical connectors and cabling specs such as SAEJ1939 CANBus/CANalyzer.

*Familiar with C4ISR equipment and vision enhancement systems including cameras and displays.

*Working knowledge of vehicle positioning systems.

*Experience using electrical test equipment including oscilloscopes, meters, power supplies.
*Knowledge of MIL-STD 1553,MIL-STD 100

*4 year degree in Engineering





Pluses:
*Experience integrating military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
 
Job Number: 314
Job Location: Sterling Hts, MI
Rate: DOE
Per Diem: yes split
Input Date: 02/07/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 04/08/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrocincs Packaing Design Engineer

Description:
Global defense contractor in MD is looking for a seasoned engineer for a long term contract assignment.

Basic Qualifications:
• Minimum 7+ years' experience in microelectronics packaging design or related field (which may include technologies such as organic PWBs, multilayer ceramic packages, flip chip, 2.5D/3D packaging, MCM, QFN, IMA, etc.)
• Proficient with NX CAD software
• Proficient with design and routing of high density Printed Wiring Boards (PWBs)
• Able to communicate and collaborate effectively as a member of an integrated product design team
• Bachelor's degree in mechanical engineering or related field
• US Citizen, with ability to obtain a Secret clearance

Desired Qualifications:
• Proficient with Mentor Expedition software
• Familiar with heat transfer methodologies for electronics, and thermal analysis tools
• Familiar with manufacturing and test methodologies of microelectronics assemblies and PWBs
• Master's degree in mechanical engineering or related field
 
Job Number: 5867
Job Location: Baltimore, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/04/2020
Firm Name: HEPCO INC
Attention: Tom Lee
Address: 160 PEHLE AVE STE 202
City, State: SADDLE BROOK, NJ 07663-5227
Phone: 201/843-4400
800 Phone: 800/656-0099
Fax Phone: 201/843-0025
Website: www.hepcoinc.com

Engineer Electromechanical

Description:
PDS Tech Inc. is seeking a Engineer Electromechanical, San Diego, CA.
Required skillsets:
  • Fundamental understanding of heat transfer, mechanics of materials, and vibration.
  • Understanding of engineering drawing standards and geometric dimensioning & tolerancing
  • Experience with CAD and FEM/FEA tools. 



 
  • US Citizen
  • Experience with CAD and FEM/FEA tools

 
Job Number: 1910109716
Job Location: San Diego, CA
Duration: 12 months
Input Date: 01/28/2020
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fZJaQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer - SECRET CLEARANCE

Description:
Job Description:

• Perform FPGA Design: Architecture, Algorithms, VHDL code generation, VHDL simulation, Synthesis and Device Implementation & Constraints, System Integration and Test.

• Design Low/Med/High Complexity Field Programmable Gate Array (FPGA) starting from System De-composition and completing through System Integration and Test



Qualifications:

• BSEE, Computer Engineering. or other related technical field of study.

• 9+ years of relevant FPGA design experience including:o Knowledge of High Complexity Digital Design Techniques and Devices.o Hardware debugging skills & experienced in operation of Signal Generator, Logic Analyzer, Spectrum Analyzer, Digital Oscilloscope and Embedded FPGA Debugging tools



Preferred Additional Skills

• MSEE

• General: Microsoft Office, DOORs (Requirement Specification and Tractability), Revision Control (GIT, CVS, PTC Integrity, etc.)

• FPGA: Mentor Graphics HDL Designer, Mentor Graphics ModelSim/Questa, Synopsis Synplicity, Xilinx Client, Xilinx EDK XPS SDK, Xilinx Vivado, Altera Quartus, System Verilog, System C, UVM, OVM, VMM.

• Circuit Card: Cadence Allegro for Schematic Entry and to support PWB Layout/Route.

• Other: SoC FPGA bring-up

• U.S. granted government security clearance.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-43852
Job Location: Clifton, NJ
Rate: 95.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-10-27 00:00:00.0
Start Date: 2019-10-28 00:00:00.0
Input Date: 10/22/2019
Last Updated: 03/04/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: $40.25
Per Diem: yes split
Input Date: 01/30/2020
Last Updated: 04/03/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities layout / Manufacturing process Industrial Engineer

Description:
Facility Designer with special emphasis in Aeronautical Industrial Building design and integration, you will interface with the Facility Engineers, Process Engineers, Manufacturing Engineers and Maintenance staff to layout new facilities(Greenfield), utilities, structural components and equipment to ensure a fully functional project is provided to the end user, taking into consideration the ease of manufacturing, availability of materials, and constructability of the final product.

•Must be able to take concept drawings and sketches and produce a full complement of Architectural, Mechanical, Plumbing, HVAC, Electrical, etc drawings in accordance with the National CAD Standards.
•Uses geometric tolerancing methods to check fit, form, and function of the accuracy and content of Engineering CAD drawing and model files, PLM datasets and BOMs, and other engineering supporting documents.
•It is expected that the Facility Designer can perform routine sizing of piping and ductwork systems with final approval from the cognizant design engineer.
•Capable of developing restroom layouts, break room layouts, conference room layouts office furniture layouts, etc for use in new construction and remodel efforts.
•Able to integrate Structural and Architectural designs with other relevant disciplines such as Plumbing, Fire Suppression, HVAC, Electrical, etc.

o Bachelor’s Degree in relevant field. (education will be verified)
o Minimum of 5/10 years’ experience in light Industrial Facility and equipment designs.
 
Job Number: 222471
Job Location: Huntsville, AL
Rate: Hourly Rate 'Open'
Per Diem: yes
Overtime: possible
Duration: NEW project from the ground up - long term
Start Date: 2 weeks
Input Date: 10/31/2019
Last Updated: 03/19/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Flight Test Instrumentation Engineer

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


Responsibilities
 
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations  and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Required:
  • Bachelor degree along with a minimum of 1 year of flight test operations experience
    • -Or-
    • A minimum of 5 years of experience in flight test operations in lieu of the degree



  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to quickly learn new software and systems
  • Must be capable and comfortable working within a diverse team environment
  • Strong oral, written, and presentation communication skills

Desired: 

  • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
  • Experience in design of instrumentation installation of sensors, wiring and equipment
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
  • Knowledge of flight test operations and certification requirements.
  • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


 
 
Job Number: 1910108505
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technician for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.

 
 Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108506
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIIQA2&URLSource=cjhunter

Flight Test Instrumentation Technologist

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technologist for a direct position in Moses Lake, WA.
Summary

As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Fabrication of support brackets and sheet metal parts
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108504
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSI8QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 03/31/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturer Engineer III

Description:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Previous experience with Solumina, Catia, SmarTeam, SAP preferred.

Essential Functions:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.
 
Job Number: 24-391
Job Location: Savannah, GA
Rate: $62.50
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/28/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturer Engineer III

Description:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Previous experience with Solumina, Catia, SmarTeam, SAP preferred.

Essential Functions:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.
 
Job Number: 24-391
Job Location: Savannah, GA
Rate: $62.50
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/28/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - no clearance WA

Description:
167449 Job Title: Manufacturing Engineer

Work Site Address: Bothell, WA 98021
Job Number: 3088-1
Max Pay Rate: $51.00/hr
Start Date: 2/10/2020
End Date: 2/20/2021
Position Type: Contract

Job Summary:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
Adapts machine or equipment design to factory and production conditions.
May incorporate inspection and test requirements into the production plan.
Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
Ensures processes and procedures are in compliance with regulations.

Qualifications and Education Requirements
BS or BA Degree is Required
BS+4-8 YRS or MS+2-6 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 2 - 4 Years
Software Skills Computer Aided Design (CAD) No 3 < 1 Year Software Skills SAP No 4 < 1 Year Technical Skills Manufacturing Experience Yes 2 2 - 4 Years Qty 1 position
 
Job Number: LMRMS-3088-1
Job Location: Bothell, WA
Rate: 51/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 03/05/2020
Last Updated: 03/05/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Shift: 2nd Shift

Unique Skills:
SAP, Solumina, Catia, SmarTeam, process methods, manufacturing engineering

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 12196
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/04/2020
Last Updated: 02/25/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
SAP, Solumina, Catia, SmarTeam, process methods, manufacturing engineering

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-396
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 02/03/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Shift: 2nd Shift

Unique Skills:
Previous Gulfstream experience working with live aircraft (G500 and G600 preferred).

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 12160
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/29/2020
Last Updated: 03/06/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Shift: 2nd Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Previous Gulfstream experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 12129
Job Location: Savannah, GA
Rate: $51.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/24/2020
Last Updated: 02/26/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Previous experience with Solumina, Catia, SmarTeam, SAP preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years manufacturing engineering, planning, or related technical experience.

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 7. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed. 8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc. 9. Keep current on state-of-the-art manufacturing developments. 10. Incorporate Lean Manufacturing Methodology into existing and future processes. 11. Develop business case and present to management for process improvement approval. 12. Assume the duties of the ME Group Head in his/her absence. 13. Assign and review work of subordinate personnel. 14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems. 15. Lead/coordinate the implementation of projects between multiple orgs. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 19. Author DRDI/DMT rework instructions to support effective corrective actions. 20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions: 1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. 2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. 5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable. 6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 12145
Job Location: Savannah, GA
Rate: $62.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/28/2020
Last Updated: 02/25/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 2

Description:
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.

Desired:
Experienced with SAP Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel). Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming. Strong written and verbal communication skills. Knowledge of Lean manufacturing concepts and techniques, Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts Leadership experience Experience in a Manufacturing environment

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) Years Mandatory(Yes/No)
1 2 3 4 5

Work Instruction Development Development of Work Manufacturing Instructions for CCA or C&H build in SAP. 3 0-3 Years Yes
Hardware Process Development CCA, ECA, and/or C&H 3 0-3 Years Yes
Direct Production Support Provide direction and training to hourly production workers 5 0-3 Years Yes

Special Needs
Category Description Recurring Frequency Mandatory
Training SAP No N/A No
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
 
Job Number: 19-16599
Job Location: Ocala, FL
Per Diem: Possible
Overtime: Yes
Duration: 6 Months
Input Date: 12/12/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
1. Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
2. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Qualifications:
1. Ten (10+) years mechanical design experience in an aerospace environment.
2. Strong 3D modeling, design and drafting ability.
3. Strong technical communication skills.
4. Specific experience with Solidworks, ANSI Y14.5, MIL-Standards, Aerospace Materials and Processes.
5. Product background in gearboxes, actuators and cable handling machines is preferred.

Education:
1. Bachelor's Degree required.
 
Job Number: 11969
Job Location: Brea, CA
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 02/04/2020
Last Updated: 03/05/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Design Engineer

Description:
Chipton-Ross is seeking a Mechanical Design Engineer for an opening in Germantown, MD.

RESPONSIBILITIES:
Specific areas of expertise include DSP-based receiver design, communication systems theory, cellular/PCS/wireless communications, software, electronic packaging, digital and RF hardware design. Position Responsibilities:
- Conceptualize and design electro-mechanical packaging to survive in tactical environments, using 3-D Computer Aided Design tools and/or other design methods.
- Collaborate and coordinate with other engineering disciplines, production, planning, BD, and vendors to build and support existing products.
- Able to work under general direction.

REQUIRED EXPERIENCE:
Ability to conceptualize and design parts using a variety of fabrication processes.
Experience in design reviews, performing thermal and tolerance analysis, component selection, prototyping new designs, and verifying requirements have been met thru testing.
Ability to create models in CAD and create accurate and concise fabrication and assembly documentation that follow industry standards. Designs must be optimized for cost and ease of manufacturing.
5+ years experience using 3D modeling tools

PREFERRED EXPERIENCE:
Experience with multiple fabrication processes, thermal analysis, connector selection, cable design, graphics design, and rendering in CAD.
Experience with Solidworks or Creo.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 184489
Job Location: Germantown, MD
Rate: $DOE
Duration: 12 Months
Input Date: 02/03/2020
Last Updated: 04/08/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Mechanical Design Engineer - Creo - Secret clearance

Description:
-Creo design experience
-develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
-extensive experience with Creo CAD system.
-must have an active Secret walking on.
 
Job Number: 21547
Job Location: AZ
Rate: open
Per Diem: yes
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 10/03/2018
Last Updated: 04/08/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Designer

Description:



Designs and develops layouts for mechanical systems. Assists in the production of detailed schematics for HVAC or plumbing and piping systems.  Typically reports to a supervisor or manager. Position requires 5-10 years of related experience. Works on projects with limited complexity in a support role. Work closely with management.  Position requires proficiency in AutoCAD and Cadworx software.


Responsible for 3D modeling, preparing 2D drawings and drafting of industrial facilities
  • Coordinate with other disciplines to develop design deliverables
  • Have understanding of AutoCAD, and CadWorx 


Qualifications


 

  • Associate's degree or 2 years of college course work would be a plus
  • MS Office skills (Word, Excel, PowerPoint) required
  • Excellent oral and written communication skills required








 
Job Number: 1910101417
Job Location: KS City, MO
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eWyQAI&URLSource=cjhunter

Mechanical Designer TS/SCI poly clearance

Description:
PDS Tech is seeking to hire a Mechanical Designer in Annapolis, MD

You will originate design layouts and geometric models of complete systems or portions of a complete system. These designs involve intricate and complicated printed circuit assemblies, from design specifications and general instructions. You will coordinate the work of other designers and drafters in the preparation of related unit designs which may comprise a complete system. 


1. Perform duties of designers and drafters of lower classification and in addition:
2. Originate design layouts and geometric models for complete new systems involving a large number of intricate and related parts and controls, complicated mechanical motions, complex structures with extreme stress requirements and/ or close tolerances. These layouts and models may be generated manually or on a CAD system utilizing conventional design/ drafting techniques. Develop engineering ideas and experimental concepts into basic designs working from sketches, design specifications and/or very general directions from the Design Engineer. This requires a comprehensive knowledge of the mechanical, electro-mechanical and/or hydraulic fields of design and drafting.
3. Make mathematical calculations in order to solve advanced design problems involving tolerances, electrical and mechanical clearances,fits, weight, effect of dissimilar metals, mechanism and machine elements, stress and the like in accordance with given formulae as to design equipment according to design specifications.
4.Confer with engineers, manufacturing operations, quality and supervisory personnel on problems affecting the design, manufacturing, and scheduling of projects to which assigned. Recommend the use of standard tools, parts, procedures, processes and the like.

5. Keep abreast of advances in computer (CAD) techniques, design, and drafting practices, design techniques, materials and processes and available standard design products of vendors which may be used in the design projects.
6. Recommend new or improved design and manufacturing standards, drafting practices, design techniques, materials and information release and control procedures.
7. Assist supervisor in providing estimates and reports relative to work efforts, coordination, scheduling, project design, progress and vendor follow, as required.
8. Execute complex engineering changes on existing equipment and, when requested, complete drawing change information either directly on drawings, on revision notice forms, or on other forms as appropriate.
9. Adhere to established procedures and practices as required.

 

Basic Qualifications:
Education Requirement: High school graduate or equivalent plus an Associate's degree in the field of design and drafting. Equivalent related drafting experience which demonstrates the ability to perform the duties assigned under this position may be considered in lieu of associate's degree. Must have studied algebra, plane and solid geometry, trigonometry, physics, and strength of materials.
 
Experience: Minimum of 10 (ten) years' of drafting experience in the electro-mechanical field. Must have a broad knowledge of the mechanical, electro-mechanical, and hydraulic fields of design. Must have a good working knowledge of manufacturing processes and the effect of design on cost. Must be able to present ideas effectively to other personnel in both oral and written form.
Clearance: Must be able to obtain a TS/SCI with Poly clearance



 
 
Job Number: 1910105156
Job Location: Annapolis, MD
Duration: 6 months
Input Date: 01/03/2020
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Adam Scott
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVqYQAW&URLSource=cjhunter

Mechanical Drafter

Description:
Responsible for drafting electronic racks and packaging for electronic testing equipment; prefer experience with Creo, but will consider other CAD tools


U.S. citizenship or permanent residency required

- Paid Holidays
- Dental
- Blue Cross/Blue Shield Medical Insurance
- Vision
- Direct Deposit
 
Job Number: HMDFT
Job Location: Texas
Input Date: 11/18/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Jerry Rothchild
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
800 Phone: 800/837-9114 x2705
Email: jrothchild@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III- Job id 40161

Description:
We have an Excellent Contract position for a Mechanical Engineer to join a leading Company located in the Vista, CA area.(Please add the job id to your response- 40161).
Job Responsibilities:
Design and develop large-scale cargo inspection systems.
Develop and design mechanical assemblies, specify mechanical components, define operational specifications, test and document designs and provide product service support.
Support overall program objectives in executing the definition and details of the development process per schedules, budgets, and technical direction.
Work closely with Engineers and Scientist of other disciplines to assure overall system design and performance is implemented and maintained correctly.
Create and maintain specifications, ensuring documents are well developed, accurate, and consistent.
Ability to organize and prioritize tasks based on guidance and direction from the engineering manager.
Ability to work and communicate effectively in a team environment.

Basic Hiring Criteria:
Bachelor’s degree in a related field.
Minimum 3 years of verifiable related experience.
Hands-on experience in the development and design of electromechanical systems.
Proficient in Engineering Mechanics (Statics and Dynamics), Fluid Mechanics, and Heat Transfer.
Hands-on experience with defining and implementing formal design documentation for mechanical engineering designs, including assembly and detail drawings, BOM’s, 3D CAD modeling.
Training and experience with Solid modeling.
Physical abilities are consistent with normal work in engineering design and development environment.
Excellent interpersonal skills.
Strong oral and written communication skills.
Ability to pass TSA suitability background check.
Must be willing to travel abroad. If travel is necessary, it typically will be 10%.

Desired Qualifications:
History of completing commercial finished products. Knowledge of machining, fabrication, and sheet metal, processes.
Experience developing, executing and reporting engineering tests and results.
Can write reports, business correspondence, and technical procedures.
Large integrated industrial platforms.
Materials and material properties associated with outdoor platforms and electronic enclosures.
Corrosion protection techniques.
Materials finishing processes.
Solidworks or other design/analysis software tools.
Can effectively apply Geometric Dimensioning and Tolerancing (ANSI Y14.5).
 
Job Number: 40161
Job Location: Vista, CA
Rate: $38-$61-DOE
Per Diem: NO
Overtime: YES
Duration: 8 Month+
Start Date: ASAP
Input Date: 01/31/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Manufacturing Engineer

Description:
Job Description:
1. This position will be responsible for determining mechanical manufacturing methods for hardware and ensuring that the processes are available.
2. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
3. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
4. Must be able to perform cost estimates, work to schedules, and write procedures and policies.
5. Must be able to review drawings and concepts and resolve producibility concerns.
6. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.
7. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
8. Must be able work well in an integrated product development/ design environment.
9. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
10. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
11. The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, pressurized accumulators and other hardware related with life support systems.
12. Experience in one or more of these fields is required.

Education/Certifications:
1. Bachelor’s Degree of Science in Engineering or Technology.
2. MBA or an advanced Engineering degree is desired.

Experience/Qualifications:
1. Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems (less experience will be considered).
2. Desired experience must include working on the manufacturing of components such as, heat exchangers, pumps, fans, & pressurized accumulators.
3. Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.
4. Familiarity with a modeling and/or design package such as ProE, Creo, NX, Catia, SolidWorks (Creo Parametric is desired).
5. Knowledge of Lean Manufacturing, machining concepts, additive manufacturing and special processing, such as welding and brazing, is highly desirable.
6. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
7. Experience with an MRP (Manufacturing Resource Planning) system is desirable.
8. US Citizen is required.
 
Job Number: 12231
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 03/30/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 12213
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 02/06/2020
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
4. Assist in developing and documenting standards for the handling and utilization of metrology equipment.
5. Create standardized inspection reports through the utilization of Metrologic software.
6. Study and optimize equipment performance for increased capacity and equipment efficiency.
7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
10. Coordinate the implementation of projects between multiple organizations.
11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements.
2. Assist tool shop as needed, during periodic and conformity Inspections.
3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques.
2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 149441
Job Location: Savannah, GA
Rate: $50/hr to $55/hr
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 01/27/2020
Last Updated: 02/25/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate:
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11978
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/18/2019
Last Updated: 02/25/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company is an AA/EOE.
 
Job Number: 284
Job Location: MoJave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 03/11/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer

Description:
Client is looking for a PCB Designer candidate.
Job Description:
Candidate should have High speed digital and RF mixed signal PCB designs using Cadence Allegro or OrCAD.
Generation of Assembly and Fabrication packages utilizing AutoCad, Blueprint and Cam350.
Footprint and Library Development.
Qualified individuals should have a strong background in electro-mechanical design and experience in high density, multi-layer designs, Knowledge of PCB fabrication and IPC specifications a plus.
 
Job Number: S&PDE_MD
Job Location: Germantown, MD
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12mos
Start Date: ASAP
Input Date: 02/03/2020
Last Updated: 02/10/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Principal Mechanical Systems Engineer-

Description:
PDS Tech is seeking a Principal Missions System Engineer in Annapolis, MD

The successful candidate Mechanical Engineer will:
Provide technical leadership in the conception, analysis and design of complex mechanical underwater systems, handling systems and underwater vehicles.
Support and/or lead development of system design concepts, evaluation of system characteristics including system trade studies, subsystem design, and integration and test.
Demonstrate a background in designing for manufacturability, with a knowledge of fabrication processes for marine structures and subsystems, and proficiency in common design tools and analytical techniques.
Present experience in the development of mechanical systems test programs, including integration and testing, with knowledge of related electrical and software systems, underwater cables & connectors, winch/cable systems, electronic packaging, and mechanisms.
 
Qualifications
This requisition may be filled as either a Mechanical Systems Engineer or Principal Mechanical Systems Engineer.
Basic Qualifications for a Mechanical Systems Engineer are:
- Engineering degree in Mechanical, Aerospace, Marine or Ocean Engineering, or a related field with a minimum of 2 years of experience with a BS or 0 years with a MS.
 - Active or Current TS/SCI with polygraph is required.
 - Moderate proficiency in common engineering /office tools (including MathCad, MatLab, FEA, MS Office) and analytical techniques including: basic structural, thermal and machine design.
 - Proficiency with 3D CAD programs such as NX and knowledge of engineering drawing development.
 - Good written and verbal communication skills, and the ability to work both independently and as a member of a multidisciplinary team in a fast paced environment
 
Basic Qualifications for a Principal Mechanical Systems Engineer are:
- Engineering degree in Mechanical, Aerospace, Marine or Ocean Engineering, or a related field with a minimum of 5 years' of experience with a BS, 3 years' of experience with a MS, or 0 years' of experience with a PhD.
 - Active or Current TS/SCI with polygraph is required.
 - Moderate proficiency in common engineering /office tools (including MathCad, MatLab, FEA, MS Office) and analytical techniques including: basic structural, thermal and machine design.
 
- Proficiency with 3D CAD programs such as NX and knowledge of engineering drawing development.
 - Good written and verbal communication skills, and the ability to work both independently and as a member of a multidisciplinary team in a fast paced environment
 
Preferred Qualifications:
 
In addition to the basic qualifications, specific experience in design and/or analysis supporting ocean engineering, naval architecture or marine engineering, including structures, material sciences, and mechanical systems packaging for deep ocean applications.
 
 
Job Number: 1910105154
Job Location: Annapolis, MD
Duration: 6 months
Input Date: 01/10/2020
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVqOQAW&URLSource=cjhunter

Principal Microelectronics CAD Administrator

Description:

 
PDS Tech, Inc. is seeking a Principal Microelectronics CAD Administrator in Baltimore / Linthicum Heights, MD.
 
  • Administer Configuration Management
  • Provide design team basic scripting capabilities in
    • SKILL,
    • Python,
    • PERL,
    • Ocean,
    • Linux Shell

  • Interface with CAD tool vendors to solve bugs, usability issues


 
Requirements
  • U.S. Citizenship 


  • Bachelor's degree in a technical area (BSEE or other Engineering discipline preferred) with at least 5 years of relevant experience (or technical MS with 3 years)
  • Will consider candidates with >8 years of experience at higher grade levels

 
Job Number: 1910109284
Job Location: Linthicum Heights, MD
Duration: 12 months
Input Date: 11/20/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fWJfQAM&URLSource=cjhunter

Principle Analog Mixed Signal IC Designer

Description:
PDS Tech Inc. is seeking a Principal Analog Mixed Signal IC Designer in Baltimore / Linthicum Heights, MD.
 
  • Bachelor's degree in a technical area with 5 years of experience in Analog/Mixed Signal Circuit design (3 years with technical MS or 0 years with a PhD) 
  • Experience with some of the following:
    • IC custom design tools (e.g. Cadence or Mentor) for schematic capture, circuit simulation, and full custom layout;
    • mixed-signal circuit design experience (Digital and Analog);
    • physical verification utilizing Cadence Assura or Mentor Calibre. 


 
This is not a layout engineer position.  Candidate must have experience designing circuits starting with schematic entry and simulation. 
 
 

 
Job Number: 1910107901
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP4oQAE&URLSource=cjhunter

Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 01/30/2020
Last Updated: 04/02/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: dbergau@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner II ( Clearfield, Utah ) S9705161

Description:
Production Planner II ( Clearfield, Utah ) S9705161
12 Month Contract

**MUST HAVE Active Secret DoD Clearance within 5 ½ years of last investigation**

Job Description:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers. Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Basic Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• Experience in working with aerospace specifications and drawings
• Experience in the areas of composite hand layup, bonding, cure, fastened assembly, subsystems installation, metallic hardware or machining experience
• Excellent computer skills. Skilled in working with Microsoft Office applications.
• Experience authoring manufacturing procedures
• Experience authoring manufacturing procedures both electronic and paper
• Experience creating and maintaining MBOMs
• Functional knowledge of production control systems (SAP/Visual Mfg/etc)
• CAD experience (CATIA or NX)

Preferred Qualifications:
• Experience in the use of NX 10 or higher
 
Job Number: S9705161
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 02/09/2020
Last Updated: 02/09/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Rotary Wing Rotors & Blades Part Design / Process Design Engineer (10-15 yrs exp)

Description:
PDS Tech is seeking a Rotary Wing Rotors & Blades Part Design / Process Design Engineer in Fort Worth, TX.
 
This candidate will support, perform and manage the activities to produce the designs and processes for Rotary Wing Rotors, Blades and Transmissions.  They will be the support liaison to design and manufacturing processes or definitions required for system components.




 
Desired skills include:
  • B.S. in Mechanical or Aeronautical Engineering
  • 10 to 15 years in Part Design and/or Process Design
  • Experience with CATIA V5 and/or 3DX, or equivalent CAD system
  • Working knowledge of GD&T
  • Experience with advanced Surfacing / Lofting, Design of Dynamic Components
  • Working knowledge of Structural Composite Repair and Tooling

 
Job Number: 1910109579
Job Location: Fort Worth, TX
Duration: 15 months
Input Date: 12/05/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fYZ5QAM&URLSource=cjhunter

Rotary Wing Rotors & Blades Part Design / Process Design Engineer (10-15 yrs exp)

Description:
This candidate will support, perform and manage the activities to produce the designs and processes for Rotary Wing Rotors, Blades and Transmissions. They will be the support liaison to design and manufacturing processes or definitions required for system components.

Desired skills include:
• B.S. in Mechanical or Aeronautical Engineering
• 10 to 15 years in Part Design and/or Process Design
• Experience with CATIA V5 and/or 3DX, or equivalent CAD system
• Working knowledge of GD&T
• Experience with advanced Surfacing / Lofting, Design of Dynamic Components
• Working knowledge of Structural Composite Repair and Tooling
 
Job Number: 1910109579
Job Location: Fort Worth, TX
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 04/07/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: sspolzino@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Checker Engineer

Description:
Seeking a PCB and CCA Quality Check Engineer to support multiple programs. The ideal candidate will perform quality checks on circuit board layouts using CAD software to verify that the design meets certain performance and producibility requirements.

The primary responsibilities of this position will include, but not be limited to:
• Works independently and as part of a team to achieve the assigned objectives.
• Use Mentor Valor NPI software to analyze printed circuit designs and generate reports.
• Ability to interpret and have a working understanding of Electronic Engineering drawings
• Check and generate assembly drawings and fab/drill drawings with a very high degree of accuracy.
• Demonstrates a very high level of accuracy in all work performed.
• Effectively communicate PCB design improvement recommendations to the Design Layout team and Engineering.
• Provides input and feedback to engineering and other functional teams in support towards the success of the projects.
• Work with external customers, Engineering, and Supply Chain to resolve any design or interpretation issues.
• Updates the Engineering Design Rules & Standards documents and checklists to capture lessons-learned and changes brought about through external specifications, industry standards and customer driven requirements.
• Provides technical leadership and knowledge in the application and support of PCB design software, design guides and rules.

Required Skills:
• Minimum 2 years’ experience with analysis/checking responsibilities in the Electronics Assembly and Fabrication industry.
• Must be familiar with applicable industry (IPC) design and end product performance standards for circuit card assemblies and printed wiring boards including IPC-6012, IPC-2221, J-STD-001, IPC-7351
• Proficient in viewing ODB++/Gerbers data, PCB assembly and fabrication drawings, and Knowledge of Electronic Components and concepts.
• Proficient in Engineering Drafting principles defined in ASME specifications
• Good mathematics aptitude and very detailed oriented.
• Must have Excellent Computers skills: - EXCEL, WORD, OUTLOOK & other office suites.
• Excellent written and verbal communication skills.
• Understanding of Printed Circuit Board fabrication: material selection, stack up, HDI and/or processes
• Ability to communicate technical knowledge and document descriptions of technical solutions for CCA and PWB technology products.
• Ability to work in multiple discipline integrated product development team environments to successfully execute tasks and deliver high quality work products.

The position requires multi-tasking to support several programs concurrently and will require local travel between sites and also some remote travel as required.

Must be a US Citizen and have ability to obtain a DOD Security Clearance

Desired Skills:
• Must have a professional demeanor and strong interest in providing excellent customer service.
• Ability to learn new skills and tasks as required, especially using software applications for PCB & Assembly industry, such as Valor NPI, Mentor Expedition, BluePrint (Downstream Technologies).
• Excellent customers service skills with a sense of urgency.
• Must be highly organized, self-motivated, and able to multi-task.
• Ability to perform at the highest level in a fast-paced environment.
• Experience laying out printed circuit boards using Expedition CAD software.
• Familiarity with design tools for printed wiring board and circuit card assembly technologies (Mentor xDM, Mentor Expedition, Blueprint, VALOR NPI, etc.)
• Familiarity with PWB/CCA technology Manufacturing Design Rules and Guidelines (MDRGs)
• Prior experience designing, and / or supporting aerospace/defense related products
• Expertise in component selection for military and aerospace environments
• IPC CID or CID+ certification
• Existing Security Clearance

Required Education:
• 8 years with Associates Degree or other advanced degree in a related field

Desired Education:
• 6 years of industry experience as a Checker with Bachelors’ Degree or advanced degree in a related field
 
Job Number: 2010111370
Job Location: McKinney, TX
Per Diem: split
Overtime: possible
Duration: 3+ months
Start Date: ASAP
Input Date: 02/07/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Drafting Technician

Description:
Senior Design Drafting Technician

Job ID # 2020-10780

Contract Opportunity

Location: Bloomington, MN

Industry: Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Associate’s Degree

Minimum Experience: 1 years



What You’ll Do:
•Create new and/or revises existing drawings using Computer Aided Design (CAD) software, and bills of material for our products
•Determine scaling; insert necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning.
•Prepare specifications for parts, assemblies, and installations; prepare complete production detail drawings; contribute design modifications to improve quality of product or facilitate manufacturing operations.
•Check drawings versus the project input for correctness and conformance to standard engineering drafting practices and standards.
•Work with engineers regarding model accuracy, design, drafting standards and ECN/ECR documentation.
•Create Engineering Change Notices detailing the necessary changes to released designs, update drawings/models/BOMs as needed, and route change requests through the approval process.
•Create and revise documentation detailing assembly and/or testing.
•May work with system management including file maintenance, backup and storage.
•Research and interface with vendors on products that meet job design requirements.
•Use the Engineering Change database to implement changes in a design document to cut costs where needed and record changes that are needed to improve on a product.
•Work under limited supervision



What You’ll Need:
•This position requires the ability to obtain a Department of Defense Secret Security Clearance within a reasonable amount of time after hire.
•Possess necessary computer skills to proficiently handle routine tasks
•General knowledge of design principles and techniques including computer aided design (CAD).
•Trained/ experienced in the use of current strategic CAD tools (Pro-E/Creo or Solid Works preferred).
•General knowledge of design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning & Tolerancing).
•Aware of simple mechanical stress; structural, thermal and tolerance analysis.
•Demonstrates initiative, applies personal talent to practical solutions.
•Works within the trade space defined (cost / schedule / technology).
•Applies general knowledge effectively in team environment.
•Able to accept and integrate constructive feedback.
•Demonstrates the ability to weigh risks and make progress in the face of uncertainty.
•Willingly takes on problems and commits to solutions.
•General proficiency in Microsoft Office applications.
•Good written and verbal communications skills.
•Fulfills role as a reliable team member and understands own role within team.
•Manages time to ensure an assignment's completion.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Associate's Degree or equivalent is required combined with a minimum of 1+ year of relevant experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10780
Job Location: Bloomington, MN
Input Date: 02/03/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Senior Principal Analog Mixed Signal IC Designer

Description:
PDS Tech Inc. is seeking a Senior Principal Analog Mixed Signal IC Designer in Baltimore / Linthicum Heights, MD.
 
  • Bachelor's degree in a technical area with 9 years of experience in Analog/Mixed Signal Circuit design (7 years with technical MS or 4 years with a PhD) 
  • Experience with some of the following:
    • IC custom design tools (e.g. Cadence or Mentor) for schematic capture, circuit simulation, and full custom layout;
    • mixed-signal circuit design experience (Digital and Analog);
    • physical verification utilizing Cadence Assura or Mentor Calibre. 


 
This is not a layout engineer position.  Candidate must have experience designing circuits starting with schematic entry and simulation. 
 

  
  
 

 
Job Number: 1910107904
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP53QAE&URLSource=cjhunter

Software / Test Engineer

Description:

Job Description

Software Engineer to work in a team environment to redesign/re-write, test, and document software for a new generation of automated test equipment used to perform system functional testing of Boeing 737 airplanes.  Software will be developed sequentially for three different ATE systems, with commonality to the extent possible.  Software will generally be written in C# and running on Windows OS with complexity on the order of 50,000 lines of code.  Existing software is a mix of C#, National Instruments LabWindows C for Virtual Instrumentation (CVI), and some Visual Basic. 
 



Basic Qualifications (Required Skills and Experience)

• Bachelor's Degree and 5 or more years' experience, Master's degree with 3 or more years' experience or
  PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of
  study, in engineering, computer science, mathematics, physics or chemistry
• Strong background and expertise with C# development and Visual Studio
• Experience developing object-oriented applications using .NET framework design patterns
• Experience participating in Agile software development teams
• Experience using Git and GitLab or GitHub
• Software development experience including communication with hardware APIs
• Experience in data acquisition and control.
• Ability to read electrical schematic diagrams to understand airplane interface requirements

 


Desired Experience, Skills, and Qualifications

• Experience in National Instruments LabWindows CVI and/or Visual Basic 6
• Experience in PXI, PCI, VXI, IEEE-488, RS-485, CAN bus instrumentation
• Familiarity with Microsoft Access and SQL Server
• Experience in avionics data busses such as ARINC 429
• Proficiency in Microsoft products (Windows, Office, Project, Visual Studio, etc.)
• Experience configuring Windows 10 user profiles for security considerations
• Experience configuring computer networking for DHCP, private network, and proxy servers
• Computer aided design (CAD) with AutoCAD, Autodesk Inventor or Catia
 
Job Number: 1910108209
Job Location: Renton, WA
Duration: 12 months
Input Date: 10/24/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQSJQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
South Greeley, Wyoming - Project Manager / Engineer

Description:
Location: South Greeley, WY
This position requires an experienced discipline engineer who is also a proven project manager. The position leads to increasing responsibilities within the company over the next several years.

Must be a mechanical/process, structural or electrical/controls engineer with a PE. Must have or be willing and able to obtain a California license promptly. Engineering qualifications vary depending on discipline. We design and fabricate containerized hydrogen systems on behalf of others (aka EPC). Experience with hydrogen systems, structural supports, skids, PLC controls, and tubing and mechanical equipment specs are desirable and will be discussed during an interview. Will be responsible for writing material and equipment specifications, performing calculations, sizing, bidding and procuring commercially available components. We design the containers or use existing skids/containers an integrate technology within them. All designs are to be modelled in 3D - must have some CAD capability and be able to work well with designers. Must coordinate and work well with other disciplines and suppliers. Ideal candidate will be familiar with and able to use CadWorx 2018 or newer. Drawings will be issued for construction and permitting to local authorities for projects all over the country. Must be familiar with and comfortable with Continuous Quality Improvement and KPIs. Resume must demonstrate success at meeting cost, schedule and quality goals for completed projects.

Must have demonstrated skill as a Project Manager, preferably in the Petrochemical or Power industries. A minimum of 10 years’ relevant experience is required. Conversant with WBS, cost and schedule preparation and control using MS Project, earned value calculation, and periodic progress reporting. Our projects are typically less than $2MM- will be expected to manage multiple projects simultaneously. Will prepare and maintain Project Management Plans including Project QA/QC Plans, budgets and schedules and also manage work to meet requirements in these documents. Will be principal point of contact with Clients. Some domestic travel may be required.
 
Job Number: 10194
Job Location: South Greeley, WY
Rate: 90/hr+
Per Diem: split
Overtime: no
Duration: Temp to Perm
Start Date: ASAP
Input Date: 02/17/2020
Firm Name: PRECISION RESOURCE COMPANY INC
Attention: Scott Houle
Address: P O BOX 318
City, State: SHARON, MA 02067
800 Phone: 888/431-6300
Fax Phone: 888/431-6301
Website: www.prcnational.com

Sr. Principal Engineer Electromechanical

Description:
PDS Tech Inc. is seeking a Sr. Principal Engineer Electromechanical, San Diego, CA.
Required skill sets:

  • Fundamental understanding of heat transfer, mechanics of materials, and vibration.
  • Understanding of engineering drawing standards and geometric dimensioning & Tolerancing.
  • Experience with CAD and FEM/FEA tools.

  • US Citizen
  • Experience with CAD and FEM/FEA tools
  • Must have technical and people leadership skills.

 
Job Number: 1910109717
Job Location: San Diego, CA
Duration: 12 months
Input Date: 12/04/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fZJfQAM&URLSource=cjhunter

Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 04/01/2020
Last Updated: 04/08/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Technical Design 3

Description:
PDS Tech, Inc. is seeking a Technical Design in Oklahoma City, OK.

Summary:

  • Primary Responsibilities:
    Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.
     

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience
 
Job Number: 2010110534
Job Location: OK City, OK
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fdy7QAA&URLSource=cjhunter

Technical Designer 3

Description:
Chipton-Ross is seeking 5 Technical Designer 3's located in Oklahoma City, OK.

RESPONSIBILITIES:
Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.

EXPERIENCE/EDUCATION:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience

WORK HOURS:
Full-Time/First Shift
7:00 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 183964
Job Location: OK City, O
Rate: $DOE
Duration: 6 months
Input Date: 01/08/2020
Last Updated: 04/08/2020
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer-Engines Tooling

Description:
A Technical Designer-Engines Tooling job in Kent, WA is currently available through Belcan. The Technical Designer-Engines Tooling job will Design and maintain component and assembly product definition by preparing design layouts and drawings, modifying existing designs and resolving design discrepancies This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight.

Technical Designer-Engines Tooling duties:

* Apply Design for Manufacturing and Design for Assembly
* Apply relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and
maintain data depicting engineering designs (detail, assembly and installation drawings)
* Apply relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and
maintain data depicting engineering designs (detail, assembly and installation drawings)
* Implement engineering and manufacturing best practices to achieve a balanced approach to
cost, schedule and performance requirements
* Self-prioritize and self-schedule work activity in support of the team
* Assist in the development and deployment of reasonable standards for drafting.
* Support drafting standards checking and training for the team.

EDUCATION AND EXPERIENCE REQUIRED
* 5+ years of experience designing/drafting structural parts, precision components, and/or
subsystems
* Proficiency in Creo Pro/E and Pro/E Piping, Sheet Metal, and Mechanism
* Experience with mechanical and weldment design and component integration Experience
creating and maintaining family tables; ability to work on multiple projects in parallel
* Strong work ethic with a high attention to detail and level of organization
* Extensive knowledge of precision machined component design and manufacturing
* Experience managing large CAD assemblies and associated drawings
* Extensive experience and knowledge of ASME Y14.5 Geometric Dimensioning and Tolerance

Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Technical Designer-Engines Tooling job in Kent, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 299013
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 02/06/2020
Last Updated: 03/05/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Technical Writer

Description:

General Summary:



The Technical Writer will work independently and as part of a team to author a set of airplane technical manuals (AFM, AMM, CMM, IPC, WDM, SRM) from engineering, manufacturing, flight, and supplier data. The writer shall be able to research within Engineering drawing structure to find all necessary supporting documents.



Duties and Responsibilities:



1.    Research technical information to develop technical documents.



2.    Ability to develop airplane illustrated parts catalog from engineering drawings, blueprints, manufacturing, flight, bills of material, and supplier data; using the industry system of indenture.



3.    Work independently and as part of a team to help revise a set of airplane technical manuals (AFM, AMM, CMM, WDM, SRM) from engineering, manufacturing, flight, and supplier data.



4.    Ability to create line art to illustrate aircraft parts and assemblies for use in aircraft technical manuals, parts catalogs and other related publications.



5.    Able to develop isometric technical illustrations from scratch using basic technical illustration principles.



6.    Experienced in interpreting blueprints, detailed engineering specifications, and schematics (electrical, hydraulic, and pneumatic).



7.    Exhibit strong attention to detail and be an excellent communicator, verbally and through graphic visualizations


Education, Work Experience, Certification and/or Licensure:
  1. Aviation technical writing experience required.
  2. Knowledge of technical publication’s regulatory requirements and Industry Writing Specifications (ATA , GAMA, DITA and S1000D).
  3. Experience authoring documentation in structured Adobe Framemaker (SGML, XML) and Cortona3D/Xmetal RapidAuthor (ATA task numbering; typical DTDs/schema, elements and attributes) or other .xml authoring software.
  4. Experience with MS Office suite.
  5. Experience using CAD/CATIA/3D illustrations.
  6. Experience with Teamcenter PLM system.

Knowledge, Skills and Abilities:

  1. Knowledge of aircraft systems and technical documentation, including illustrated parts catalogs, airplane maintenance manuals, operator manuals, and installation instructions
  2. Past aviation maintenance or assembly work
  3. Demonstrate strong attention to detail and personal organization
  4. A fundamental understanding of FARs as they apply to aircraft operations, maintenance and design certification.
  5. Excellent communication and computer skills.
  6. Self-starter and able to make sound writing decisions with minimum assistance from supervision.

 
Physical Requirements:

  1. Incumbents may be routinely asked to look at airplane areas using ladders and lift equipment. Also may have to view airplane areas in cramped, enclosed environment.
  2. Incumbents may be required to sit and work at a desktop computer for long stretches of time.
  3. Incumbents will work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Incumbents will read, hear, speak, and see with no restrictions, as required by job duties.
  5. Incumbents will comprehend and adhere to management directions and/or safety instructions with no restrictions.

Incumbents will effectively communicate in Business English language. 
 
Job Number: 2010111121
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/23/2020
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fgVBQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer 4

Description:
Tool Designer 4

Location: Mesa, AZ
Duration: 6 Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Skill Code: 66W-Tech Designer

Education / Experience:
Education/experience typically acquired through advanced education (e.g. Associate) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+4 years' related work experience, 8 years' related work experience, etc.).

Additional Information:
NX is the CAD system that will be utilized.
 
Job Location: Mesa, AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 12/10/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

UGNX Mechanical Designer

Description:
Applies Computer Aided Design (CAD-UG NX11) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Develops innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs by utilizing sound design principles and practices
 
Job Number: 4211
Job Location: PA, PA
Rate: 40hr
Per Diem: YES
Overtime: YES
Duration: Contract
Start Date: ASAP
Input Date: 02/06/2020
Last Updated: 04/08/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Wire Design & Install Engineer 1

Description:
Chipton-Ross is seeing 3 Wire Design & Install Engineer 1's located in Ridley Park, PA.

RESPONSIBILITIES:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.

PREFERRED EXPERIENCE:
CAD/CAM - Novice Level
Computer Aided Design (CAD) - Novice Level
PDM - Novice Level

EDUCATION:
Accredited Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM
 
Job Number: 184605
Job Location: Ridley Park, PA
Rate: $DOE
Duration: 12 Months
Input Date: 02/06/2020
Last Updated: 04/08/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Wire Design & Install Engineer 3

Description:
Chipton-Ross is seeking a Wire Design & Install Engineer 3 for an opening in Tukwila, WA.

RESPONSIBILITIES:
Seeking an experienced Wiring and Harness Engineer to provide engineering expertise to the Space Systems organization in the Puget Sound area. The Wiring and Harness Engineer is responsible for engineering design and development through the entire product life cycle of system development. This engineer will contribute to design, develop, document, and build solutions for electrical wiring for a variety of Phantom Works programs. This environment is fast paced and requires adaptability between programs and priorities. Team work, strong communication, and technical excellence in the area of wiring and harness engineering are qualifications for this position. Designs, models, integrates and tests electrical wiring and harnessing for electrical systems. Performs electrical power system activities and supports the system through the entire life cycle. Position Responsibilities:
Electrical wiring system design, modeling, build, integration and test
Perform trade studies
Requirements decomposition from component ICDs to support electrical system architecture definition
Analyze system performance through modeling and testing
Hardware design and development
Takes long lead times into account to inform program schedules
Document engineering deliverables, designs, processes, schematics, bills of materials, drawings, build and test procedures
Perform hands-on engineering and supporting tasks for production, and integration, test, and troubleshooting of electrical wiring and harness

REQUIRED EXPERIENCE:
3 or more years' experience in electrical wire and harness design

DESIRED EXPERIENCE:
Prior experience and/or knowledge of electrical systems in space environment
Understanding of EMI/EMC implications to harness design
Strong communication and team working skills
Ability to adapt to fast paced work environment
Experience with complex electrical design and manufacturing
Experience defining material requirements and specifying BOMs
Experience evaluating electrical ICDs and decomposing electrical requirements
Experience with CAD modeling
Experience across product life cycle

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 183566
Job Location: Tukwila, WA
Rate: $DOE
Duration: 12 Months
Input Date: 12/12/2019
Last Updated: 04/08/2020
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineers : AL, OK, WA states

Description:
Multiple Positions Below

1. Wire Design & Install Engr 4

Location: Huntsville, AL
Duration: 8 Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design

Creo- That is the CAD software that is needed for Alabama location


-----------------------------------------------------------------


2. Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other Job Responsibilities May Include:
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies.
- Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Basic Qualifications (Required Skills and Experience):
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Skill Code: 652-Wiring Design



-----------------------------------------------------------------

3. Wire Design & Install Engr (Level 3, 4, 5)

Location: Tukwila, WA
Duration: 6+ Months

Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- Designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Oklahoma CIty, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: asap
Input Date: 02/03/2020
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 2, 3

Description:
Wire Design & Install Engr 3

Location: Kennedy Space Center, FL/ Ridley Park, PA
Duration: 12+ Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction. Familiarity with wire harness design and electronic unit placement for aerospace applications desired. Unigraphics NX CAD experience required.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Kennedy Space Center, FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 10/17/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Wire Design & Install Engr 3

Description:
PDS Tech, Inc. is seeking a Wire Design & Install Engineer, in Tukwila,, WA. 
Job Description Summary

Position Responsibilities

•Electrical wiring system design, modeling, build, integration and test
•Perform trade studies
•Requirements decomposition from component ICDs to support electrical system architecture definition
•Analyze system performance through modeling and testing
•Hardware design and development
•Takes long lead times into account to inform program schedules
•Document engineering deliverables, designs, processes, schematics, bills of materials, drawings, build and test procedures
•Perform hands-on engineering and supporting tasks for production, and integration, test, and troubleshooting of electrical wiring and harnes
 
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Basic Qualifications

•3 or more years' experience in electrical wire and harness design
•Current Top Secret Security Clearance (updated within the last 5 years)

Preferred Qualifications

•Bachelor’s Degree, or higher, in Electrical Engineering
•Prior experience and/or knowledge of electrical systems in space environment
•Understanding of EMI/EMC implications to harness design
•Strong communication and team working skills
•Ability to adapt to fast paced work environment
•Experience with complex electrical design and manufacturing
•Experience defining material requirements and specifying BOMs
•Experience evaluating electrical ICDs and decomposing electrical requirements
•Experience with CAD modeling
•Experience across product life cycle
•SCI highly desired
  •  

 
Job Number: 1910109901
Job Location: Seattle, WA
Duration: 12 months
Input Date: 12/06/2019
Last Updated: 04/09/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fZuuQAE&URLSource=cjhunter

Back to Advanced Job Search