Job Search Results

510 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/16 Saturday 04:53AM Pacific Time by ContractJobHunter. )

Listings 1 - 510

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2117 - ELECTRICAL WIRING DESIGNERS (EWIS) - cv, word doc only

Description:
Perform as a technical authority in wiring 3D design.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole.

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Provide technical leadership, coaching, men.toring and training to staff.

Identify and manage technical risks & opportunities.

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members.


Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM's, RAE documents and BAPS related to harnesses (Client Eng Practices).

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.

Must Master Knowledge of wiring parts selection in aircraft systems.

Must Master strong communication and negotiation skills.

Must Master excellent troubleshooting skills.

Must Master Knowledge of New EWIS Regulations.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.
 
Job Number: 2117
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2121 - QUALITY ASSURANCE - CONFIGURATION - cv, word doc only

Description:
Read and interpret drawings in order to validate consumption of parts.

Have a good knowledge of engineering requirements in terms of released data.

Have an good knowledge of Client processes.

Interpret engineering requirements.

Analyze product documentation and define conformity gaps vs engineering requirements.

Bachelor Degree in aerospace and a minimum of 11 years of relevant experience in aerospace.

MUST BE BILINGUAL (speak French & English fluently), good communicator, professional and are open to work with other cultures.

Previous experience in Engineering/methods would be an asset.

Must be able to analyze product documentation and defined conformity gaps vs. engineering requirements.

Must be able to interpret engineering requirements.

Must be able to interface with internal and external collaborators on plans and technical aspects.

Must have a good knowledge of information systems, MS Office (Excel +++), SAP, Enovia.

Have Engineering/Methods background (especially from Client), BMS/BES knowledge a plus.

Have good knowledge and comprehension of the Configuration/Change management (modsum, NIEO, drawing...).

Must have a good knowledge in Quality procedures, processes and systems.

Have structured personality, not afraid to speak up when facing a situation/ability of dealing with a situation.

Have analytic mindset, multi-tasker, autonomous, resourceful, capable of working long hours in front of a computer, flexible.
 
Job Number: 2121
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 06/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2128 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.
 
Job Number: 2128
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2130 - DESIGNERS - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review

Support to IPDT and Suppliers

Work on Trade Studies, test plans, Installation and detail drawings

Support experimental testing and entry into service

University mechanical or civil or aerospace engineering degree

Minimum of 5 years relevant experience.

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential

Self-motivated person, a team player able to work under pressure and under a minimum of supervision

Read and write in English and have good communication skills.

Being bilingual (French and English) is an asset.
 
Job Number: 2130
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2131 - ELECTRICAL WIRING DESIGNER

Description:
Review and approve Supplier deliverables (ESSD/PCD) in part or in whole.

Engage with electrical System stakeholders and manage workload scheduling.

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Must have a minimum of 5 years of relevant working experience in aerospace.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

EWIS experience is an asset.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

Knowledge of Mentor Graphics or equivalent wiring design tool is an asset.

You have wiring design, wiring installation and/or wiring troubleshooting experience.

You have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Comfortable working with MS office suite.

Familiar with BM%u2019s, RAE documents and BAPS related to harnesses

Create and maintain quality and productivity tracking tools.

Provide technical support on change management implementation (RFC, PCR).

Recommend and integrate wiring diagram design changes to meet customer configuration.

Be able to identify and manage technical risks.

Communicate lessons learned to other community members.

Required to support team Supervisor to disposition conflicting requests from different stakeholders.
 
Job Number: 2131
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/01/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2138 - PROGRAM ANALYST - resume - word doc only

Description:
Articulate the goals and objectives of the program, and how it will impact the business.

Own the development and management of the strategies, schedules and budget of your project portfolio.

Establish and track metrics to monitor performance and progress, prepare status reports and modify schedules and plans as required.

Provide day-to-day leadership to cross-functional teams.

Present project schedules, business cases and updates at regular reviews with senior management.

Identify key project risk items, with corresponding risk mitigation or reduction strategies.

Escalate to the appropriate level of management as needed.

Establish and maintain relationships with internal and external stakeholders.

Bachelor%u2019s degree in Engineering (preferred) or Business.

Have a technical or manufacturing background in aerospace (considered an asset).

Eleven years, or more, of relevant experience.

Have a PMP certification (considered an asset).

Possess initiative, are results driven, and have the desire to make decisions.

Having a financial background is a strong asset.

Must be able to manage a team budget.

Have strong project management experience, team leadership skills as well solid analytical, planning, and problem solving abilities.

Possess superior communication skills (written & spoken) and the ability to influence at different levels of the organization.

Are able to work under pressure and tight deadlines, and still deliver on commitments.

Have working knowledge of Microsoft Office (Word, Excel, PowerPoint and Project).

Bilingual (French/English).
 
Job Number: 2138
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2139 - CONFIGURATION CONTROL - CHANGE MANAGEMENT - Canadian citizens only

Description:
Configuration Management:
- Performs varied duties relating to the development, control and maintenance of new and existing complex engine configurations.
- Coordinates investigations relative to initial change request acceptance.
- Review change requests and verify all generated documents and parts lists that provide the control and traceability of engine configuration.
- Provides initial start-up Bill of Material (BOM) to numerous departments for planning purposes on new engine programs.
- Recommends improvements and provides input in the development of configuration systems and procedures to facilitate use of the defined engine configurations.
- Interact with the Group Leader and Supervisor regarding departmental planning and assigned engine model responsibilities.

Drafting:
- Generates complex engineering drawings and layouts of moderately complex design concepts using a computer aided drafting system (CATIA).
- Provides technical assistance through the detail design phase.
- Provides technical direction to junior draftspersons in preparation of engineering and manufacturing drawings and related documentation.

- College diploma in Engineering Technology, or equivalent with a minimum of 2 years of relevant experience in aerospace.
- Demonstrated leadership, technical writing and problem solving skills.
- General knowledge of construction and function of gas turbine engines.
- Ability to read engineering drawings.
- Knowledge of configuration management systems (CCIS, ERIS, IECS).
- Experience in Operations, Customer Support or Assembly and Test.
- Bilingual (French & English), is an asset.
- Drafting: An extensive knowledge of mechanical drafting, engineering mathematics, geometric tolerancing, manufacturing methods, physics and strength of materials.
- Demonstrated organizational skills, excellent communication skills, and capable of working independently and in a team.
- Experience using CATIA, 2D or 3D or similar.


- Must be a Canadian citizen.
 
Job Number: 2139
Job Location: Montreal, Canada
Rate: $20 to $65 per hour
Per Diem: No PD
Overtime: No OT
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2143 - METHODS AGENT - CABINET CONFIGURATION - Word doc. only

Description:
Define and produce work instructions for the fabrication and assembly destined for the manufacturing of cabinets.

Work in close collaboration with the Engineering, Production, Logistics and quality functions.

Investigate root causes and analyze potential solutions taking into account cost, impacts and risks of a production change.

Ensure production change feasibility.

Analyze the feasibility of customer requests (P&O, C&O) and program change requests (PCR).

Plan and implement changes in production (all change affecting the production method) and coordinate first unit in production.

Support daily production activities.

Identify non-value added activities, eliminate them and optimize production.

Establish the following requirements: ergonomics & health & safety, tools and production equipment according to optimal work methodology.

Participate in the development and maintenance of methods procedures.

Participate in continuous improvement through the achieving excellence system.

Technical college degree, university degree and/or equivalent experience.

Minimum of 8 years of experience in aerospace or other related manufacturing industry.

Experience in cabinet making, finishing or composite will be considered an asset.

Are functional in the French language, spoken and written.

Are able to read technical drawings and have good visualization skills in 3D.

Have good knowledge of MSOffice suite (Word, Excel, PowerPoint, Outlook).

Knowledge of aircraft structures, systems or interiors will be considered an asset.

Knowledge of SAP and CATIA V5 is required.

Are organized, a good planner and problem solver.

Have a good judgment, have a sense for innovation and possess a good decisional process.

Have good interpersonal communication skills and are customer oriented.

Have strong project management skills and function well within a multidisciplinary team
 
Job Number: 2143
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 06/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2145 - MRB LIAISON ENGINEER - Word document only please.

Description:
Responsible for providing engineering support to the production operations at the Client Assembly Business Unit (Support various

Client Programs) during the evening shift and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

Have a university degree in Mechanical Engineering.

Have three (3) years or more MRB experience in the Aerospace field.

Have Catia and MRB (Material Review Board) work experience.

Position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

Must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Bilingualism would be an asset.

Evening shift.
 
Job Number: 2145
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/17/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2150 - CABINET DESIGNER - Word document only please.

Description:
Act as a specialist in a specific system / monument

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Bombardier Aerospace Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Bombardier Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs%u2026
Support the creation of Interface Control Drawings (ICD)
Report status, identify and mitigate roadblocks
Point of contact on a technical level for designers
Accountable for engineering deliverables and milestones for a group of monuments

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5

Organized and project oriented.

Good communication skills including good English and French are assets

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Design experience in cabinet assembly design and/or cabinet installation

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)
 
Job Number: 2150
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 8+ Mths
Start Date: ASAP
Input Date: 06/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2153 - DESIGN/STRESS SPECIALIST - Word document only please.

Description:
Work in a very dynamic integrated product development team (IPDT) involving all technical and production functions.

Put forward optimal solutions for major aircraft structures suitable for latest manufacturing technologies and processes.

Carry out technical feasibility studies, preliminary concepts, volume management for equipment, interfaces requirement, technical review.

Support to IPDT and Suppliers.

Work on Trade Studies, test plans, Installation and detail drawings.

Support experimental testing and entry into service.

University mechanical or civil or aerospace engineering degree.

Minimum of 15 years of relevant experience.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Ability to understand complex engineering issues.

Basic knowledge required:
- 3D and MBD creation in CATIA V5
- GD&T and technical drawings
- Certification rules
- Manufacturing requirements

Must be computer literate and familiar with commonly used software (MS Office).

Experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Have the knowledge of CATIA, finite element modeling and analysis is an asset.

Have general computer skills - essential.

Are a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Read and write in English and have good communication skills.
Being bilingual (French and English), is an asset.
 
Job Number: 2153
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2154 - PROJ. ENGINEER - ELECTRICAL WIRING DESIGN - resume word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of fifteen (15) years equivalent experience in the aerospace industry.

Proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

A high level of communication skills in both French and English is an asset.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and client Change Management process would be an asset.

Knowledge of Electrical Harness Design would be a strong asset.

An understanding of aerospace product certification is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.
 
Job Number: 2154
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2156 - MATERIAL & PROCESS ENGINEER - Word document only please.

Description:
Perform a diversified range of engineering functions such as evaluating various metallic and non metallic materials and processes and their limitations.

Support Manufacturing and the associated Methods and quality groups.

Support an integrated product development team (IPDT). By drawing review, you will have to ensure that the design meets the Materials and Process requirements.

Devise qualification test plans, analyse the results and issue certification reports, especially to get the use of non-metallic materials approved.

Have a degree in Materials Engineering in materials or equivalent.

Have a minimum of 5 years relevant experience.

Have an extended knowledge in the materials used in the aerospace industry and in the main mechanisms of corrosion.

Are autonomous, capable to take initiatives. You like team work and show good judgment

Are aware of the main Microsoft office (Word, Excel, Power Point).

Bilingual (French/English).

Totally functional with Catia V5.
 
Job Number: 2156
Job Location: Montreal, Canada
Rate: 48.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2158 - PROJECT MANAGEMENT - Word document only please.

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases.

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations.

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of 5 years equivalent experience in the aerospace industry.

Must have proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

Bilingual (French/English) and a high level of communication skills is required.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and Client Change management process would be assets.

Full flexibility is expected. Possibility of on-call, shift-work, rotational work, weekends, odd hours, evening shift, etc., and occasional business trips to Toronto or Mexico.
 
Job Number: 2158
Job Location: Montreal, Canada
Rate: 48.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2159 - PROJECT ENGINEER - resume - word doc only

Description:
Create, harmonize and track compliance to various schedules required to manage the project;

Coordinate and track to ensure major Supplier/BA deliverables are available on schedule;

Manage priorities, and the communication and harmonization of these priorities;

Work in Engineering Release (Drawings, Modsums, Documents, Service Bulletins etc), tracking and compliance to associated schedules;

Coordinate Integrated Product Development Team cross-functional reviews as necessary;

Coordinate multi-site activities as necessary;

Manage change through BA process (ECCB, DCP/PCR/EMT);

Produce governance visibility for the Project;

Actively support the Achieving Excellence (AE) departmental objectives;

Represent Engineering & Product Development at various inter-departmental meetings;

Review supplier human resources and risk management plans;

Create the Statement of Work for each development phase of the project.

Engineering degree/diploma or equivalent working experience, with 8 years+ experience in aerospace.

Are familiar with Program/Project Management processes.

Have sound aircraft Engineering and/or Operations experience (asset).

Demonstrate a professional attitude and superior communication skills (essential).

Have excellent organizational, time management skills, foresight, accuracy, attention to detail and commitment to objectives and responsibilities.

Have a pro-active attitude and ability to manage multiple priorities.

Are self-motivated, autonomous and enthusiastic.

Demonstrate ability to work willingly and independently in a fast paced, challenging environment.

Have effective problem solving skills with ability to make good decisions to move projects along to meet or exceed the targets.

Have good computing skills; proficient in MS Office and experience with MS Access/Project is an asset.
 
Job Number: 2159
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 06/19/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2161 - ELECTRICAL HARNESS 3D DESIGNER - Word document only please.

Description:
Design and route cable and harnesses inside interior cabinets according to integration instructions and guidance.

Create the harness 3D models to support engineering deliverables (HDR & H3D).

Design per BM, BAPS, RAE documents.

Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle.

Deliver 3D models on time to meet team%u2019s commitments and program milestones.

Review and approve supplier deliverables.

Incorporate change management authorities (RFC, PCR) into 3D models.

Contribute to the team effort by meeting the team's objectives for productivity and quality KPIs.

Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt.

University degree in mechanical Engineering of equivalent work experience in harness routing.

Have over 5 years of CATIA V5 Experience in harness routing.

Have experience with harness manufacturing or methods (formboards).

Have minimum of 5 years of relevant working experience in Aerospace or Transportation.

Have harness installation experience and you are familiar with ECAD tools & processes, BMS and BAPS.

Have a strong sense of responsibility and have good organizational skills and initiative.

Are innovative and open to new ideas.

Have the ability to resolve problems and conflicts

Are comfortable working with the MS Office suite

Bilingual (French/English) have excellent communication skills including the ability to read/ write in both.
 
Job Number: 2161
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2162 - PROJECT ENGINEER - Word document only please.

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports.

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations.

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of ten (10) years equivalent experience in the aerospace industry.

Must have proven experience in project management and/or project engineering.

To be successful in the role, you need to demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

Bilingual (French/English) - a high level of communication skills in both French and English is required.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and Client Change management process would be an asset.
 
Job Number: 2162
Job Location: Montreal, Canada
Rate: 48.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 05/23/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

5 Aircraft Stress Engineers with Composites

Description:
5 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Acoustics Engineers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Aerospace Acoustics Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight
• Establishes structural specifications, performs stress analysis, and conducts performance tests
• Primary responsibilities are specific to aircraft cabin noise and include performing acoustic analysis, providing technical guidance to other engineers for mitigating noise, and planning and conducting acoustics tests
• The candidate will have substantial experience with the engineering analysis, design, development, and testing/evaluation of aircraft cabin noise mitigation techniques and systems
• Experience should include the “best practice” methods for the estimation of aerodynamic, vibration, and structural noise generation
• Firsthand experience in the evaluation and selection of FAA and DoD flight approved noise dampening materials
• Also required is experience in the human factors aspect of noise, such as noise exposure limits and speech intelligibility

Qualifications:

• Level 4: 9 Years’ with Bachelors in Science; 7 Years’ with Masters; 4 Years’ with PhD
• Level 5: 14 Years’ with Bachelors in Science; 12 Years’ with Masters; 9 Years’ with PhD
• Must have an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38301
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aerospace Design Support and Training Instructor/TSI

Description:
PDS Tech is seeking a Aerospace Design Support and Training Instructor/TSI for an open position in Savannah, GA.
In your role, you will:


Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of the Client's products and services.

Essential Functions:
  1. Contributes to planning, developing and coordinating of important engineering projects
  2. Provides specialized technical assistance to team members
  3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  4. Determines and develops own approach to solutions within schedule and cost objectives
  5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
  6. Acts as liaison with representatives outside of the assigned group/area 


Additional Functions:

  • Actively works to improve daily processes and ensures all work meets customer requirements
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 

As our ideal candidate, you will meet the following requirements:
 

Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:

  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


Unique Skills:



CATIA v5 experienced with 2000+ hours. Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Generative Surfacing a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Established background of instruction or support role. Formal Classroom instruction experience required.

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability. 



 
Job Number: 1610055767
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002MyvjAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Structural Engineers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Aerospace Structural Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Perform static structural analyses of composite airframe structure by hand and by using the automated methods and procedures approved for the program
• Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives
• The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization
• Tools utilized may include FEMAP, NX, Teamcenter, and other software applications

Basic Qualifications:

• Must be a U.S. citizen
• Bachelor of Science degree (ME/AE/CE) with 14 years of experience in Aerospace Structural Analysis
• DOD Secret clearance required to start
• Offer contingent about acquiring Special Program Access

Preferred Qualifications:

• Airframe experience with Advanced Composite Materials is Preferred
• Knowledge of FEMAP and NX CAE
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38276
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Affordability Systems Engineer

Description:
Leading Aerospace company, located in Canoga Park, CA, is seeking an Affordability Systems Engineering Specialist for a 6+ month contract role.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Essential Job Functions:

90% - Affordability Engineering Support of Programs. Typical duties may include but not limited to the following:
-Lead or assist with should cost estimates for proposals.
-Lead or assist with PRICE TruePlanning estimates of propulsion system costs and associated component costs.
- Lead or support Design-to-Cost efforts on programs
-Build a strong working relationship with other employees to ensure that the group?s capabilities are full utilized and that the group?s results are meeting customer needs.
-Embrace a continuous improvement mindset
-Demonstrate a 100% commitment to quality in actions, decisions, and conversations

10% - Discipline Support and/or Training and Education:
-Create and improve training materials and possibly deliver training sessions
-Support discipline initiatives
-Complete mandatory and discretionary training
-Attend staff meeting and other discipline coordination meetings.

Skills:
-Experience with COTS parametric and other hardware modeling tools is highly desired.
-Advance Excel skills
-Understanding of how to best segregate and capture product costs is preferred
-Familiarization with spacecraft and/or launch vehicle systems is preferred
- Excellent verbal and written communication skills are required
-Strong work ethic and drive to succeed are required
-Ability to work with all levels of the organization is required
-Local candidate preferred.

Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires US Citizenship)

Education:

Requires a Bachelor's in Engineering or related discipline and at least 9 years directly related work experience or an equivalent combination of education and experience.
 
Job Number: 12021
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 Months+
Start Date: April
Input Date: 04/17/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: John Dillon
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

Air Systems

Description:
ECS for interiors/cabin pressure systems; aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler Positions

Description:
We are currently working on a project in the Greensboro area to employ multiple positions for assemblers. If you qualify and are selected for this position you will be provided on-the-job paid training for 6 months and upon successful completion will be offered a direct position.

In order to qualify you are required to successfully complete the following:
• Successful completion of work keys - Silver Level (minimum score of 4 on each of the 3 core areas)
• Successful completion of the Bennett Mechanical Aptitude Test
• Interview with local management
• Must have at least 1 year experience in an manufacturing environment
• Must be able to successfully complete background investigation and drug screen
• Must have the ability to obtain or possess a current secret clearance prior to start date

Also accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

If you are interested in this position please follow the link to our webpage where you can apply for this position or email me at sue@moseleytechnical.com.

https://internal-moseleytechnical.icims.com/jobs/3293/mfg-assoc-ii---mechanical-assm/job?mode=view
If you can't click on the link you can copy and paste the address in your browser.

Moseley is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

I look forward to hearing from you!


Sue Parker
Account Representative
Moseley Technical Services, Inc.
(843) 371-6504 Cell
(888) 247-8936 E-Fax
 
Job Number: 3293
Job Location: Greensboro, NC
Per Diem: No
Overtime: Possible
Duration: temp to hire
Input Date: 04/18/2017
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sue
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Engineer

Description:
A Leading Aerospace company, located in Canoga Park, CA, is seeking an Assembly Engineer for a 12+ month contract.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:

Provide engine assembly support by coordinating with component engineers, investigate product non-conformances and provide dispositions for evaluation.

Skills:

-Drawing experience.
-Pro-E Creo experience.
-Hardware processing experience.
-Non-conformance experience.

Keyword: Hardware Assembly

Education:

B.S. Aerospace or related degree
 
Job Number: 12003
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 1 Year+
Start Date: April
Input Date: 04/17/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

Avionics -- Flight Management Systems

Description:
Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO / NX Mechanical Design Engineer

Description:
A Leading Aerospace company, located in Redmond, WA, is seeking a CREO/NX Mechanical Design Engineer III for a 12+ month contract role.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:

60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:

Required:
-Proficient experience using NX or CREO CAD System.
-Proficient with Teamcenter or Windchill PLM System.
-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
-Excellent experience in the creation of mechanical hardware.
-9+ Years of related Aerospace Industry experience.

Desired:
-A strong mechanical aptitude and experience with CAD software tools is desired.
-Proficiency with Microsoft Office products (Word, Excel and PowerPoint).
-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
-Active secret clearance is desired, not required.

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.
-An advanced engineering degree is a plus.
 
Job Number: 12102
Job Location: Redmond, WA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 1 Year+
Start Date: ASAP
Input Date: 04/18/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Mechanical Design Engineer

Description:
A Leading Aerospace company, located in Canoga Park, CA, is seeking a CREO Mechanical Design Engineer III for a 12+ month contract role.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:

60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:

Required:
-Proficient experience using CREO CAD System and Windchill PLM System.
-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
-Excellent experience in the creation of mechanical hardware.
-9+ Years of related Aerospace Industry experience.

Desired:
-A strong mechanical aptitude and experience with CAD software tools is desired.
-A proficiency with Microsoft Office products (Word, Excel and PowerPoint).
-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
-Active secret clearance is desired, not required.

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.
-An advanced engineering degree is a plus.
 
Job Number: 12101
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 1 Year+
Start Date: ASAP
Input Date: 04/18/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Mechanical Design Engineer III

Description:
Creo Mechanical Design Engineer III
Canoga Park, CA
1 Year Contract
$40.00-47.00/Hr

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:
Required:

-Proficient experience using CREO CAD System and Windchill PLM System.

-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.

-Excellent experience in the creation of mechanical hardware.

-9+ Years of related Aerospace Industry experience.

Desired:

-A strong mechanical aptitude and experience with CAD software tools is desired.

-A proficiency with Microsoft Office products (Word, Excel and PowerPoint).

-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.

-Active secret clearance is desired, not required.

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.

-An advanced engineering degree is a plus.
 
Job Number: 7329
Job Location: Canoga Park, CA
Rate: 40.00-47.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Cabin Safety Specialist

Description:
Annunciator, emergency lighting, human factors, placards, signage

Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III

Description:
Component Product Engineer II/III

Location: Canoga Park, CA
Pay Rate: DOE ($42/hr - $48/hr)
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** This is not a designer role **

Duties:
-Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
-Candidates should have at least 3 years of related work experience.

Skills:
• 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
• 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
• 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
• 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
• 10%: Supplier integration with external vendors
• 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
• A Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: 7164
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III NOT a Designer role / local candidates only! CA

Description:
Job Title: Component Product Engineer II/III
Keywords:
Number of Positions: 3

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Additional Information: Manager has decided that she only wants to see local candidates at this time.

** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
Candidates should have at least 3 years of related work experience.
Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave

Start Date: 04/03/2017 Hours Per Week: 40.00
Est. End Date: 10/01/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-6804757
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Mechanical Design Engineer III CA

Description:
Job Title: Creo Mechanical Design Engineer III
Job Number: 159203/6819537
Location: Canoga Park, CA
Compensation: 47/hr
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
Skills: Required:
-Proficient experience using CREO CAD System and Windchill PLM System.
-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
-Excellent experience in the creation of mechanical hardware.
-9+ Years of related Aerospace Industry experience.

Desired:
-A strong mechanical aptitude and experience with CAD software tools is desired.
-A proficiency with Microsoft Office products (Word, Excel and PowerPoint).
-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
-Active secret clearance is desired, not required.

Keywords:
Education: -Bachelor of Science degree in Mechanical or Aerospace Engineering and five (5) years of directly related experience, or an equivalent combination of education and experience is required.
-An advanced engineering degree is a plus.
# of Positions: 1
 
Job Number: MB-6819537
Job Location: Canoga Park, CA
Rate: 47/hr max
Duration: 12 month contract
Input Date: 05/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo/NX Mechanical Design Engineer III

Description:
Creo/NX Mechanical Design Engineer III
Redmond, WA
1 Year Contract
$40.00-47.00/Hr

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.



10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.



20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.



10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Skills:
Required:

-Proficient experience using NX or CREO CAD System.

-Proficient with Teamcenter or Windchill PLM System.

-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.

-Excellent experience in the creation of mechanical hardware.

-9+ Years of related Aerospace Industry experience.



Desired:

-A strong mechanical aptitude and experience with CAD software tools is desired.

-Proficiency with Microsoft Office products (Word, Excel and PowerPoint).

-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.

-Active secret clearance is desired, not required.

Education:
-Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.

-An advanced engineering degree is a plus.
 
Job Number: 7330
Job Location: Redmond, WA
Rate: 40.00-47.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo/NX Mechanical Design Engineer III WA

Description:
Job Title: Creo/NX Mechanical Design Engineer III
Job Number: 159202/7006490
Location: Redmond, WA
Compensation: 47/hr
Assignment Length: 12 month contract


Description:



Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

60% - Primary responsibilities are to drive mechanical design activities for liquid thruster propulsion system components and assemblies. Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

10% - Support shop floor and production hardware processing. Review and address non-conforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Lead engineering drawing and specification updates at configuration change boards.

20% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare presentations and present technical information for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
Skills: Required:
-Proficient experience using NX or CREO CAD System.
-Proficient with Teamcenter or Windchill PLM System.
-Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
-Excellent experience in the creation of mechanical hardware.
-9+ Years of related Aerospace Industry experience.

Desired:
-A strong mechanical aptitude and experience with CAD software tools is desired.
-Proficiency with Microsoft Office products (Word, Excel and PowerPoint).
-Prior experience with pressurized systems (tanks, valves, fluid flow devices, metallic joining and processes) is key to performing job requirements. -Experience with FEA tools such as ANSYS Workbench is desired.
-Active secret clearance is desired, not required.
Keywords:
Education: -Bachelor of Science degree in Mechanical or Aerospace Engineering and nine (9) years of directly related experience, or an equivalent combination of education and experience is required.
-An advanced engineering degree is a plus.
# of Positions: 1
 
Job Number: MB-7006490
Job Location: Redmond, WA
Rate: 47/hr max
Duration: 12 month contract
Input Date: 05/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DESIGNER / DRAFTER / Solidworks test onsite / local only / Aerospace structures ASME CA

Description:
159187
TITLE: DESIGNER / DRAFTER
NORTHROP GRUMMAN/ASTRO AEROSPACE
Carpinteria, CA.
45/hr max

Seeking designers and drafters for contract openings at Astro Aerospace.

We have requirements for 2 to 4 new designers immediately and up to 7 within a few weeks. Currently we are interviewing two people but will have positions for two more. The focus of these designers should have more Drawing and Engineering Change Order experience than Design Engineering Experience.

Job Description:
Astro Aerospace, a Strategic Business Unit of Northrop Grumman Aerospace Systems, is currently in search of a Designer 4 to support our deployable space structure programs in Carpinteria, CA.

S(he) will design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. They will also develop basic data and make preliminary layouts, sketches, and notes necessary to present a design proposal. All will be done in conjunction with other organizations affected by design development.

Responsibilities
- Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
- Create layouts of complex assemblies and detail parts of devices, mechanisms, and structures.
- Check completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
- Identify design errors, omissions, and other deficiencies.
- Recommend revisions and/or improvements in design layout to the responsible engineers or designers.

Basic Qualifications:
- An Associate's or other two year technical degree in a related discipline, with six (6) years of related experience in mechanical or electro/drafting with aerospace structures and mechanisms.
- A minimum of three (3) years of experience using Solidworks and PDMWorks is required.
- Demonstrated knowledge of manufacturing practices and comprehensive working knowledge of ASME 14.5, ASME Y14.100.
 
Job Number: MB-001
Job Location: Carpinteria, CA
Rate: 45/hr max
Duration: 6-12 month contract
Input Date: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

DFC Structures Flight Test Engineer

Description:
PDS is seeking a EFCS  Engineer for an open position in West Palm Beach, FL


 


In your role, you will:


  • Test planning function, conduct and report helicopter flight tests in structures and dynamics
    1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
    2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
    3. Large volumes of gathered flight data are processed and analyzed.
    4. Certification and/or qualification tests are summarized in reports.
     

Education and Experience:
- Bachelor's in Aerospace or Mechanical Engineering as a minimum
- Candidate must have flight test or aerospace design experience
- Rotary wing experience preferred.
 

 
Job Number: 1610052203
Job Location: West Palm Beach, FL
Per Diem: No
Duration: 24 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001sjdzAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Independence, Ohio) 8056, landing gears

Description:
Design Engineer ( Independence, Ohio) 8056
12 month contract

Pay Rate Range - $70+ DOE
12 month + assignment

**Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts.


Note: minimum of 10 years of experience in Landing Gear design

Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and UTAS-LS design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.

Basic Qualifications
• Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development
• Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies
• Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
• Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics
• Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
• Demonstrated ability to work directly with customers and suppliers
• Understanding of performance based specification requirements, requirements management and verification.
• In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
 
Job Number: 8056
Job Location: Independence, OH
Rate: 70
Per Diem: yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 04/22/2017
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / Catia V5 PDM / Landing gear experience required / Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts OH

Description:
Job Title: Design Engineer
Job Number: 158840/8056
Location: Independence, OH
Compensation: 60-70/hr
Assignment Length: 12 month contract

Description:


Pay Rate Range - $70 DOE

12 month + assignment

**Must have aerospace experience and be strong in conceptual design, be familiar and comfortable working with oleo pneumatic, cantilever shock design, trailing arm, shock struts.


Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and UTAS-LS design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.


• Technical responsibility for all design related tasks of the project while working with the following:

o Project Head to ensure that design tasks are properly managed to achieve end item deliverables in accordance with project plans

o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements

o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust product is developed

• Executes design activities including:

o Customer / Suppliers:

Liaise with customer/Suppliers for all design related issues

Foster strong customer relationships through accountability, transparency and credibility

Assist with development and maturation of system procurement specification and statement of work

o Integration / Planning:

Responsible and accountable for all design tasks and its completion dates

Sets design priorities and objectives with a strong drive to meet expectations

Communicates progress and roadblocks with the Integrated Product Team (IPT) and the Project Head

o Design Tasks

Develops, reviews, recommends, coordinates design, design change activity with customer, other Company disciplines including production and manufacturing engineering

Generates design documentation such as trade studies, tolerance stack-ups, interface agreements, installation and proximity sensing analysis

Investigates design related issues and develops effective solutions

Develop Landing Gear and Landing Gear mechanisms from customer specifications considering regulatory requirements and UTAS-LS Engineering methodologies.

Generate design layouts, developmental and kinematic assemblies within Catia V5

Utilize UTAS New Product Introduction tools to facilitate execution for design related tasks as required

Present designs at internal and external design reviews to ensure the design meets requirements and expectations

Develop and achieve agreement on Landing Gear interfaces with customers and suppliers.
o Problem Resolution

Performs Engineering investigations into failures and participates in Root Cause and Corrective Action

Ensure timely and satisfactory resolution of problems

o Compliance

Ensures compliance to UTAS-LS engineering methodologies by providing direction/guidance to the design team.

Maintains compliance to ITAR and regulatory requirements

• Occasional travel between customer/suppliers and UTAS-LS locations.

• May be asked to complete other tasks based on skills and qualifications

Basic Qualifications

• Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development

• Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies

• Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system

• Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics

• Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers

• Demonstrated ability to work directly with customers and suppliers

• Understanding of performance based specification requirements, requirements management and verification.

• In-depth knowledge of MS programs (Word, Excel, Project, Power Point)

• Successful candidates must meet all requirements under ITAR & CCGP

• Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust

• US citizen, permanent resident alien or able to review all export-controlled technical information.
 
Job Number: DW-8056
Job Location: Independence, OH
Rate: 60-70/hr max
Duration: 12 month contract
Input Date: 05/10/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Checker / Catia V5 / Landing Systems Design OH

Description:
8033
Design Engineer Checker / Catia V5 / Landing Systems Design
Pay Rate - $45 - $55/hour.

Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:
o Associated parts list
o Detailed part and assembly definition
o Tolerance stack-up evaluation
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Compliance
o Ensures compliance to UTAS-LS Engineering methodologies
o Maintains compliance to ITAR and regulatory requirements
o Occasional travel between customer/suppliers and UTAS locations.
• Perform other duties as required

Basic Qualifications Search BS in Mechanical or Aerospace Engineering
• Minimum of 8 years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Working knowledge of materials and surface treatments.
• Strong communication skills
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Demonstrated ability to work with PDM systems (Smarteam, MatrixOne, Teamcenter) system
• Successful candidates must meet all requirements under ITAR & CCGP
• Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
• US citizen, permanent resident alien or able to review all export-controlled technical information.

Preferred Qualifications:
• Demonstrated knowledge of ASME Y14.100 and Y14.41.
• Landing gear experience.
• Knowledge of Root Cause Corrective Action.
• Open minded, pro-active, independent, quick learner with a strong desire to learn.
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
Comments
 
Job Number: DW-8033
Job Location: Independence, OH
Rate: 45-55/hr max
Duration: 12 month contract
Input Date: 05/10/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II/III

Description:
Seeking a Engineering Design 2/3 for an opening in Melbourne, FL.

**Must have active Secret Clearance to start**

RESPONSIBILITIES:
Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

REQUIRED EXPERIENCE:
Engineering Design 2/3 (1 position)
-Experience in support of aerospace electrical subsystem design or test operations.
-Strong MS Office skills, strong technical writing abilities -Must be willing to relocate to Palmdale in approx. 1-2 years.
-Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired.
-Level 2: 2 Years with Bachelors in Science; 0 Years with Masters -Level 3: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

EDUCATION:
Bachelors in Science

WORK HOURS:
Shift: 1st Shift - 9/80

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 162896
Job Location: Melbourne, FL
Rate: $32-$50
Duration: 9-12 Months
Start Date: ASAP
Input Date: 04/14/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers (Level 1 & 2) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
• Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers
• Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design

Basic Qualifications:

• Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years
• Level 1: 0 Years’ with Bachelors in Science Mechanical Engineering
• Level 2: 2 Years’ with Bachelors in Science Mechanical Engineering; 0 Years’ with Masters Mechanical Engineering
• Position requires an active DoD Secret clearance

Preferred Qualifications:

• Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38295
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers (Level 2 & 3 - Electrical) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
• Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers

Qualifications:

• Experience in support of aerospace electrical subsystem design or test operations
• Strong MS Office skills, strong technical writing abilities
• Must be willing to relocate to Palmdale in approx. 1-2 years
• Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired
• Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
• Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
• Position requires an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38297
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Assembly Engineer

Description:
Development Assembly Engineer

Location: Canoga Park, CA
Rate: $40.00 - $43.00/HR
1 year contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Provide engine assembly support by coordinating with component engineers, investigate product non-conformances and provide dispositions for evaluation.

Skills:
-Drawing experience.
-Pro-E Creo experience.
-Hardware processing experience.
-Non-conformance experience.

Keyword: Hardware Assembly

Education:
- B.S. Aerospace or related degree.
 
Job Number: 7197
Job Location: Canoga Park, CA
Rate: $40.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer

Description:
Development Test Engineer - Electric Propulsion

Location: Canoga Park, CA
Rate: $40.00 - $48.00/HR
6 month contract position
Travel: Yes - Will require significant travel to El Segundo, CA and Ann Arbor, MI


** MUST be able to obtain a Secret Clearance. An Active Secret is preferred, but NOT required**


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
Experience/familiarity with the following preferred:
-Electric Propulsion
-Vacuum chamber systems and low pressure environments
-High voltage circuits and electronics
-Thruster testing or hollow cathode operation
-Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)
-Plasma interaction with materials
-Thruster performance characteristics (Thrust, Isp, efficiency, etc.)
-Understanding of magnetic fields and conductive/radiative heat transfer

Skills:
-Test experience
- Writing test plans
-Performing test setup
-Test analysis
-Basic understanding of facility requirements and test article installation
-Microsoft Office

Key Words:
- Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer

Education:
- B.S. in Mechanical, Aerospace, Physics, or related field.
 
Job Number: 7264
Job Location: Canoga Park, CA
Rate: $40.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer / Electric Propulsion

Description:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** An active Secret Clearance is preferred, but NOT required. Only submit candidates with active Secret Clearances if you are able to employ them (have access the JPAS system) **



** Will require significant travel to El Segundo, CA and Ann Arbor, MI **





Experience/familiarity with the following preferred:



-Electric Propulsion

-Vacuum chamber systems and low pressure environments
-High voltage circuits and electronics

-Thruster testing or hollow cathode operation

-Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)

-Plasma interaction with materials

-Thruster performance characteristics (Thrust, Isp, efficiency, etc.)

-Understanding of magnetic fields and conductive/radiative heat transfer

Skills:
-Test experience

-Writing test plans

-Performing test setup

-Test analysis

-Basic understanding of facility requirements and test article installation

-Microsoft Office



Key Words:

Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer

Education:
B.S. in Mechanical, Aerospace, Physics, or related field.
 
Job Number: 6914524
Job Location: Canoga Park, CA
Rate: 48
Duration: 6+ Months Possible Direct
Start Date: ASAP
Input Date: 04/12/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: A.J. Schweiger
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer / Electric Propulsion

Description:
Title: Development Test Engineer - Electric Propulsion
Location: Canoga Park, CA
Duration: 6+ months contract

Experience/familiarity with the following preferred:

Electric Propulsion
Vacuum chamber systems and low pressure environments
High voltage circuits and electronics
Thruster testing or hollow cathode operation
Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.)
Plasma interaction with materials
Thruster performance characteristics (Thrust, Isp, efficiency, etc.)
Understanding of magnetic fields and conductive/radiative heat transfer
Skills:

Test experience
Writing test plans
Performing test setup
Test analysis
Basic understanding of facility requirements and test article installation
Microsoft Office
Education:

B.S. in Mechanical, Aerospace, Physics, or related field.
Key Words: Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer
 
Job Number: SH366413
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: No
Duration: 6+ months
Start Date: ASAP
Input Date: 04/17/2017
Firm Name: CDI CORPORATION
Attention: Stephen Harwan
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Test Engineer / Electric Propulsion CA

Description:
Job Title: Development Test Engineer / Electric Propulsion
Job Number: 159106/6914524
Location: Canoga Park, CA
Compensation: 48/hr max
Assignment Length: 6 month contract

Description:


** An active Secret Clearance is preferred, but NOT required.

** Will require significant travel to El Segundo, CA and Ann Arbor, MI **


Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** An active Secret Clearance is preferred, but NOT required.

** Will require significant travel to El Segundo, CA and Ann Arbor, MI **


Experience/familiarity with the following preferred:

-Electric Propulsion
-Vacuum chamber systems and low pressure environments -High voltage circuits and electronics -Thruster testing or hollow cathode operation -Plasma physics and plasma diagnostic tools (Faraday probes, Retarding Potential Analyzers, ExB probes, etc.) -Plasma interaction with materials -Thruster performance characteristics (Thrust, Isp, efficiency, etc.) -Understanding of magnetic fields and conductive/radiative heat transfer

Skills:

-Test experience
-Writing test plans
-Performing test setup
-Test analysis
-Basic understanding of facility requirements and test article installation -Microsoft Office

Key Words:

Electric Propulsion, Hall Thruster, Ion Thruster, HCT, GIT, EP, Hollow Cathode, Voltage, Plasma Physics, Thruster Testing, Discharge, Plume, Magnetic Field, Rocket Engine, Systems Engineer, Test Engineer
Keywords:
Education: B.S. in Mechanical, Aerospace, Physics, or related field.
# of Positions: 4
 
Job Number: MB-6914524
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/20/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Director of Customer Service Engineering

Description:

PDS Tech is seeking candidates for Director of Customer Service Engineering for the Regional Jet Program.
This position is located in Nagoya, Japan.



Job Description



The Customer Support Director of Service Engineering is responsible for providing in-service technical support to customer airlines, leasing companies and authorized MROs for the servicing, repair, and continued safe operations of aircraft.  The Service Engineering team supporting the Fleet Management organization is the primary interface to address all reliability and maintainability issues for the fleet.  Additionally the Director of Service Engineering has prime responsibility for the  24x7 Operations Center which provides Customers and MROs with round the clock technical support to resolve AOGs and address performance deterioration which may impact operations as detected through Aircraft Health Monitoring.  Service Engineering will work closely with Design Engineering and Regulatory Authorities to resolve in-service issues and improve fleet performance through the coordination and authoring of Service Bulletins and 8110 Authorized Repairs.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating the team and team structure, implementing work processes and process standards, implementing governance and communication processes, and the technical performance of the group.



 



Scope of Work



Processes



  • Implement the Service Request processes and tools required to receive technical questions from customers, and coordinate and approve a timely, quality response.  Create an archive of technical issues and responses.
  • Review every incoming technical request from each customer for its potential safety implication.  Any potential safety issue will be coordinated with the Fleet Chief who will initiate the Lead Airline Process if required.  The potential safety issue will be input into the 21-3 Continued Airworthiness Safety process.
  • Answer technical questions (e.g. “How does this system work?”, “We want to do [X], what will be the impact and is this acceptable?”, “Please confirm our understanding of the [X] document that the [part description] for our aircraft serial number [123] is part number [xyz]”).  Coordination with Design Engineering and Suppliers as necessary.
  • Provide “fix” or “replace” recommendations based on cost and flow time.
  • Provide structural repair instructions and regulatory approvals (i.e. JCAB, FAA, EASA) for the repair when appropriate (e.g., 8110-9).
  • Participate in the Fleet Improvement Process (FIP) as directed by the MRJ Fleet Chief to identify solutions to chronic reliability performance issues and develop solutions for permanent fixes in both delivered and future production aircraft.
  • Coordinate with Design Engineering and Suppliers as required to solve “in service problems”.
  • Coordinate with Engineering and Suppliers on design changes necessary to retrofit delivered aircraft and improve future production aircraft based upon service experience or potential airworthiness issues identified during fleet operations.
  • With Design Engineering develop bill of material and work instruction content material for the accomplishment of Service Bulletins which is then provided to Service Bulletin technical writers for incorporation in forthcoming fleet Service Bulletins
  • Support the Continued Airworthiness Process, Safety Review Process (SRP) and Flight Safety Review Board.
  • Interact with Field Service and Operations Center (OPC) personnel to assist and address support issues or needs identified by either group.
  • Support AOG and Field Repair teams with on-site engineering support during aircraft recovery operations as requested by the field repair team.


The primary deliverables of Service Engineering include:



  • Completed Service Requests as entered in the Customer Portal in accordance with established KPIs.
  • Repair instructions and regulatory approvals for repairs not covered by existing approved repair manuals (SRM).
  • Updates to the Fleet Improvement Team Digest based upon progress and status both Safety and Non-Safety SRP’s.
  • Service Bulletin work instruction content material.
  • Service Letters that provide important technical and maintenance information to the airlines.  Note, a Service Letter does not authorize an airline to modify an airplane (it is not a regulatory approved document.) 
  • Skilled employees that will form the Service Engineering team, staff the Operations Center, and staff the Field Service team.


Job Requirements:



The Central Service Engineering functions will be performed primarily in Komaki and an Operations Center that is staffed and directly interfaces with Service Engineering will be staffed 24/7/365 to support operations worldwide.



 




    Education/Experience and Skills:



    1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
    2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Service Engineering functions to commercial airline customers.
    3. Candidates must have Regulatory (FAA/EASA/JCAB) coordination experience.
    4. Candidates must have skills and experience managing Suppliers.

     
    Job Number: 1710063873
    Job Location: Nagoya,
    Duration: 24 months
    Input Date: 12/15/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKH0AAO&URLSource=cjhunter

    Director of Technical Publications

    Description:

    PDS Tech is seeking candidates for Director of Technical Publications for the Regional Jet Program.
    The primary work location will be Seattle, Washington, USA, with travel required to Nagoya, Japan.



    Job Description



    The Customer Support Director of Technical Publications is responsible for the Development, Verification & Validation, Certification Approval, Publication and Revision of all maintenance and repair documents for the program to ensure the aircraft can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team (including 3rdparties required to supplement staff) and team structure, implementing governance and communication processes, and the performance of the group.



     



    Scope of Work



    Processes:



    • Implement the processes and tools required to author, publish and revise all maintenance and repair documents in accordance with industry standards.
    • Manage the document development process to meet program schedule milestones.
    • Establish and manage 3rd parties required to supplement the staff.
    • Coordinate with Design Engineering and Suppliers to obtain technical information and content required to meet industry standards for document scope and content.
    • Author and publish all Instructions for Continuing Airworthiness (ICA) documents (see Deliverables and Products section for a list of ICA documents) and other industry standard manuals required for maintenance and repair of the fleet.
    • Establish the document revision process required to incorporate changes from Design Engineering as well as Customer Originated Change (COC) requests (e.g. Engineering Orders, SB accomplishment, implemented Supplemental Type Certificates, etc.).
    • Review and accept Component Maintenance Manuals (CMM) produced by Partners.
    • Author and publish Service Bulletins originating from the Airplane Change Process


    “Authoring” as described above include the development of maintenance procedures, safety warnings, cautions & notes, access identification, remove/replace instructions, and test procedures.  All documents produced by this group’s activities must conform to strict formatting and publishing standards as defined by ATA S1000D and other adopted industry specifications.  Documents are revision controlled to include highlight sheets, list of effective pages, revision bars, and distributed in both PDF and SGML (selected documents only) upon approval by the required regulatory authority as applicable.



     



    The primary deliverables of Technical Publications include:



    • Service Bulletins
    • Maintenance Tips
    • Aircraft Maintenance Manual (AMM)
    • Fault Isolation Manual (FIM)
    • Aircraft Recovery Manual (ARM)
    • Standard Wiring Practice Manuals (SWPM)
    • Wiring Diagram Manual (WDM)
    • System Schematic Manual (SSM)
    • Structural Repair Manual (SRM)
    • Aircraft Illustrated Parts Catalog (AIPC)
    • Corrosion Prevention Manual (CPM)
    • Non Destructive Test Manual (NDTM)
    • Maintenance Planning Document (MPD)
    • Maintenance Review Board Report (MRBR)
    • Maintenance Task Cards (MTC)
    • Illustrated Tool & Equipment Manual (ITEM)
    • Maintenance Facilities and Equipment (MFEPM)
    • Component Maintenance Manuals (CMM) –  Proprietary Parts


    The Technical Publications function will be performed both in Seattle, WA and Komaki, Japan.  Third parties will be used for the initial document creation process as the permanent team is formed and capabilities are implemented.



     






        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Technical Publication functions to commercial airline customers.
        3. Candidates must be familiar iSpec2200 and S1000D and have participated in technical publication Industry Standards groups.
        4. Candidates must have skills and experience managing Suppliers.

         
        Job Number: 1710063876
        Job Location: Seattle, WA
        Duration: 24 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Lucinda Contreras
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHPAA4&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        EMC/EMI TEST TECHNICIANS - AEROSPACE / DEFENSE / COMMERCIAL / FCC

        Description:
        Johnson Service Group, a leading Engineering Staffing and Consulting company has an immediate  opportunity for talented EMC/EMI Test Technicians. 

        Required Experience and Responsibilities:

        -2-4 years+ of experience in test set up and execution of  EMC/EMI testing.

        -Understanding of EMI/EMC related technology and equipment including Spectrum Analyzers, RF Amplifiers.

        -Ability to execute EMC Control Plans, EMI Test Plans, procedures and reports.     

        -Familiarity with seismic and EMI/RF testing is a plus.

        -Experience with MIL Std-461, or DO-160, and/or Commercial FCC standards.

        -Experience with LabVIEW, or another data acquisition system, is a plus.  

        -Will provide EMC/EMI testing and compliance services to clients.

        -Coordinate the maintenance and calibration of EMC test equipment.

        -Maintain a high degree of knowledge of regulatory standards and testing procedures.

        -Will contribute to test set-ups, and operate/adjust test equipment for EMI/EMC testing.

        -Excellent communication, interpersonal and customer service skills.

        -Ability to function well in a team environment.

        -Familiarity with Microsoft Office Suite

        Education:  2 year Associate's Degree or 4 year Bachelor’s Degree in Electrical Engineering or similar engineering-related field is preferred.

        Start Date:  ASAP

        Duration:  3 months+

        Location:  Rockford, IL

        Compensation:   Highly competitive compensation and benefits. 

        Citizenship:  U.S. Citizen or Permanent Resident (legally able to work in the United States) is required
         
        Job Location: Rockford, IL
        Rate: Open
        Per Diem: Split
        Overtime: Possible
        Duration: 3-6 months+
        Start Date: ASAP
        Input Date: 05/04/2017
        Firm Name: JOHNSON SERVICE GROUP
        Attention: Jay Kerrigan
        Address: 950 S BASCOM AVE STE 2122
        City, State: SAN JOSE, CA 95128
        Phone: 408/728-9510
        800 Phone: 866/656-0539
        Fax Phone: 408/271-2701
        Website: www.jsginc.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        EMI/EMC Technician – Contract - Rockford

        Description:
        EMI/EMC Technician – Contract - Rockford

        On behalf of our client Ingenium is recruiting and evaluating candidates for the position of EMI/EMC Test Technician. This is a 2-3-month contract position located in Rockford IL. Full time with overtime required up to 60 Hours
        Must be a US person- No Visa Candidates can be considered
        Multiple Test Technicians required – Contract and Contract to Hire potential
        RESPONSIBILITIES:
        • Ability to independently perform test set-ups, operate and adjust test equipment for EMI/EMC testing requirements. Work in a lab/ office environment. Set up and conduct precision testing following procedures and generating test data for analysis and reports.
        REQUIREMENTS:
        • Understanding of EMI/EMC related technology and equipment including Spectrum Analyzers, RF Amplifiers.
        • Ability to use a systemic approach in the execution of EMC Control Plans, EMI Test Plans, procedures and reports.
        • Results oriented with excellent time management skills.
        • Excellent communication and interpersonal skills with team members and customers.
        • Familiarity with DO-160 and Mil Std 461 a plus.
        • Ability to function effectively in a team, in a dynamic, fast paced environment.
        • Experience with military and aerospace testing a plus.
        • Familiarity with seismic and EMI/RF testing a plus.
        • Knowledge of industry test documents such as MIL/Aerospace standards desired.
        • Overtime is required with second shift scheduling potential.

        EXPERIENCE and QUALIFICATIONS:
        • EMI lab test technician experience is primary requirement.
        • Aerospace electronic lab test technician experience considered.
        • Advance technical training or degree is a bonus.
        • Compensation commensurate with qualifications.

        Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

        Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

        Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

        Additional Job Postings: http://www.ingeniumtech.com/jobs/
         
        Job Number: 89712
        Job Location: Rockford, IL Illinois
        Rate: commensurate
        Per Diem: split
        Overtime: required
        Duration: 3 months
        Start Date: 5-1-2017
        Input Date: 04/18/2017
        Firm Name: INGENIUM TECHNOLOGIES
        Attention: David Johnson
        Address: 4216 MARAY DR UNIT A1
        City, State: ROCKFORD, IL 61107
        Phone: 815/399-8803 X255
        Fax Phone: 815/399-8804
        Website: www.ingeniumtech.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Applications Engineer

        Description:
        Electrical Applications Engineer

        Location: Savannah, GA
        Pay Rate: $58/hr - $63/hr
        Duration: Long Term Contract
        Shift: First
        *Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project*

        Unique Skills:
        -Experience with Autocad required; Aerospace experience required.
        -Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
        -Be Familiar with CFR 14 Part 25 and AS50881.
        -Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
        -Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

        Job Description:
        -Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        -5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

        Position Purpose:
        -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

        Principal Duties and Responsibilities/Essential Functions:
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned

        Other Requirements:
        1. Advanced degree in engineering related field preferred
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
         
        Job Number: 7059
        Job Location: Savannah, GA
        Rate: 58.00-63.00
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Input Date: 10/06/2017
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Applications Engineer II

        Description:
        Engineer II – Electrical Applications

        Location: Savannah, GA
        Rate: $40.00 - $50.00/HR
        Long Term contract


        Unique Skills:
        - Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
        - Select qualified electrical components such as connectors, back shells, and other parts.
        - Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
        - Aerospace Experience is required
        - Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
        - Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
        - Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


        Education and Experience Requirements:
        Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.


        Position Purpose:
        Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

        Principal Duties and Responsibilities:
        Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

        Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

        Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
         
        Job Number: 6826
        Job Location: Savannah, GA
        Rate: $40-$50
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Input Date: 07/11/2017
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        Electrical Applications Engineering Consultant

        Description:
        PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
        In your role, you will:

         

        Unique Skills:



        • Experience with Mentor Graphics L-Cable required. Aerospace experience required.
        • Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881.
        • Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



        Principal Duties and Responsibilities: Essential Functions:

        • Contributes to planning, developing and coordinating of important engineering projects
        • Provides specialized technical assistance to team members
        • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        • Determines and develops own approach to solutions within schedule and cost objectives
        • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        • Acts as liaison with representatives outside of the assigned group/area


        Additional Functions:

        • Actively works to improve daily processes and ensures all work meets customer requirements
        • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        • Performs other duties as assigned Other

        As our ideal candidate, you will meet the following requirements:
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

        Education/Experience:

        • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

         
        Job Number: 1610052916
        Job Location: Savannah, GA
        Per Diem: No
        Duration: 6 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Clyde Callwood
        Address: 3922 COCONUT PALM DR STE 100
        City, State: TAMPA, FL 33601
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tKymAAE&URLSource=cjhunter

        Electrical Applications Engineering Contractor

        Description:
        PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
        In your role, you will:

         

        Unique Skills:



        Experience with Autocad required.

        Aerospace experience required.

        Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



        Position Purpose:
        Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

        Principal Duties and Responsibilities:

        Essential Functions:

        1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


        As our ideal candidate, you will meet the following requirements:
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

        Education/Experience:

        • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

        POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

        PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
         
        Job Number: 1710063879
        Job Location: Savannah, GA
        Per Diem: No
        Duration: 6 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Clyde Callwood
        Address: 3922 COCONUT PALM DR STE 100
        City, State: TAMPA, FL 33601
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

        Electrical Engineer II

        Description:
        PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

        In your role, you will:


        The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
         
        Duties:
        • Provide electrical design and development support on a variety of simulator programs.
        • Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
        • Support peer reviews for electrical designs.
        • Perform and document electrical load analysis.
        • Support development of Interface Control Documents (ICD)s.
        • Ability to work with a variety of I/O systems.
        • Knowledge of both analog and digital component design.
        • Support development of hardware subcontractor specifications.

         
        As our ideal candidate, you will meet the following requirements:

        Qualifications:
        • B/S in Electrical Engineering.
        • 4+ years of electrical engineering technical experience.
        • Experience with CAD software, preference to AutoCAD.
        • Systems integration experience.
        • Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
        • Good computer skills including working knowledge of Microsoft Office.
        • Strong communication skills and good team work.
        Be able to obtain a DOD security clearance.

        Additional requirements: 
        Aerospace experience is required.
         
        At a minimum resumes should reflect experience with the following within the aerospace industry.
         
        •             Design and develop electrical systems on aircraft
        •             Produce wiring diagrams using computer aided design
        •             Experience with electrical load analysis

         
         
        Job Number: 1610060907
        Job Location: Arlington, TX
        Per Diem: No
        Duration: 6 months
        Input Date: 12/11/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Rebecca Burrows
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FyJFAA0&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Engineers (Level 2 & 3) - Melbourne, FL

        Description:
        STS AeroStaff Services is currently hiring Electrical Engineers for open positions in Melbourne, Florida.

        Note: All candidates must have has secret security clearance in the last five years.

        Job Duties:

        • Researches, develops, designs, and tests electrical components, equipment, systems, and networks
        • Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes

        Qualifications:

        • Strong MS Office skills, strong technical writing abilities, must be willing to relocate to Palmdale in approx. 1-2 years
        • Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired
        • Experience in support of aerospace electrical subsystem design or test operations
        • Level 2: 2 Years’ with Bachelors in Science Electrical Engineering; 0 Years’ with Masters
        • Level 3: 5 Years’ with Bachelors in Science Electrical Engineering; 3 Years’ with Masters; 0 Years’ with PhD
        • Position requires an active DoD Secret clearance

        Benefits:

        STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

        We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

        Thanks for taking the time, and we look forward to hearing from you soon.
         
        Job Number: 38296
        Job Location: Melbourne, FL
        Rate: DOE
        Per Diem: No
        Overtime: Possible
        Duration: Temp
        Start Date: ASAP
        Input Date: 04/20/2017
        Firm Name: STS AEROSTAFF SERVICES
        Attention: STS AeroStaff Services
        Address: 2000 NE JENSEN BEACH BLVD
        City, State: JENSEN BEACH, FL 34957
        800 Phone: 877/707-5767
        Fax Phone: 877/707-5767
        Website: www.stsaviationgroup.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Harness Installation Engineer

        Description:
        Electrical Harness Installation Engineer
        Savannah, GA
        Rate: $58-$63

        Unique Skills:

        Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

        Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

        Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
         
        Job Number: 7231
        Job Location: Savannah, GA
        Rate: $58-$63
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 10/03/2017
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Wire Harness Designer

        Description:
        Electrical Wire Harness Designer - Eng II

        Location: Savannah, GA
        Rate: $40.00 - $50.00/HR
        Long Term contract


        Unique Skills:
        - Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
        - Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
        - Select qualified electrical components such as connectors, backshells, and other parts.
        - Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
        - Aerospace Experience is required
        - Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
        - Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
        - Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

        Education and Experience Requirements:
        Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

        Position Purpose:
        Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

        Principal Duties and Responsibilities:
        Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

        Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

        Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
         
        Job Number: 7078
        Job Location: Savannah, GA
        Rate: $40.00 - $50.00/HR
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Input Date: 07/11/2017
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engine Systems Design Engineers

        Description:
        A Leading Aerospace company, located in Canoga Park, CA, is seeking (3) Engine Systems Design Engineers for 6+ month contract roles.

        ** Candidates must be U.S. Citizens
        **** Permanent residents are NOT eligible for this role
        **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

        Duties:
        Performs entry level design engineering duties for liquid rocket engine systems.
        Primary duties include working within an Integrated Product Team (IPT) environment to design/revise engine system components utilizing 3D CAD software, coordinating analysis support, and releasing drawings/models.
        Additional duties may include in-house/vendor fabrication and test support as needed.

        Skills:
        3D CAD experience required.
        CREO2 is a plus, but not mandatory.
         
        Job Number: 12104
        Job Location: Canoga Park, CA
        Rate: Open
        Per Diem: Yes
        Overtime: Possible
        Duration: 6 Months+
        Start Date: ASAP
        Input Date: 04/18/2017
        Firm Name: LOGIN CONSULTING SERVICES
        Attention: John Dillon
        Address: 300 CONTINENTAL BLVD STE 530
        City, State: EL SEGUNDO, CA 90245-5067
        Phone: 310/607-9091
        Fax Phone: 310/607-9818
        Website: www.loginconsult.com

        Engineering Design 1/2 (3) - FL - C

        Description:
        RESPONSIBILTIES:
        Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
        Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

        REQUIRED EXPERIENCE:
        Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
        Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
        Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
        Preferred Qualifications:
        Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

        EDUCATION:
        Bachelors in Science Mechanical Engineering, or Master's degree.

        MISCELLANEOUS:
        Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

        HOURS:
        9/80 workweek

         
        Job Number: 162898
        Job Location: Melbourne, FL
        Rate: $28 to $40.00 DOE
        Duration: 9-12 months
        Input Date: 12/15/2017
        Firm Name: CHIPTON ROSS
        Attention: Melody Mullins
        Address: 343 MAIN ST
        City, State: EL SEGUNDO, CA 90245
        Phone: 310/414-7800 X286
        800 Phone: 800/927-9318
        Fax Phone: 310/414-7808
        Email: mmullins@chiptonross.com
        Website: www.chiptonross.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engineering Designer - CAD

        Description:
        Major aerospace company in Canoga Park has a 3 Month+ contract position for an Engineering Designer who has some CAD experience.

        -Under general direction, performs engineering design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
        -Update Product Definition to incorporate comments from review cycle.
        -Performs design pre-verification (prior to official check) required for successful Windchill model/drawing tasks.
        -Creo 2.0 CAD drawings and models of moderate complexity within Windchill PLM System version 10.
        -Capable of managing moderate CAD assemblies and engineering BOM.
        -Provide routing of Product definition and other supporting documents in support of on time release and FPY metrics for design.
        -Participates in preliminary and critical design review preparations.
        -Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
        -Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness. -Support to Inter-organizational Product Teams are frequent and providing solutions to technical document delays associated with Windchill PLM assignments is required.
        -Performs assignments that typically have specified objectives and require investigation of a limited number of variables.

        Skills:

        -Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
        -Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
        -Pre-verification of CAD models and drawings in the PLM system is also required.
        -Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
        -Expert knowledge of reading and interpreting drawings and related specifications is also required.
        -Expert knowledge of Microsoft Word, PowerPoint and Excel (MS Word, MS Powerpoint, MS Excel) is required to track assignments of Product teams. -Knowledge of CREO2 CAD software is a plus.

        Education:

        -Associate's degree in an appropriate discipline and 5 years of related technical experience as engineering designer or equivalent combination of education and experience.
        -Bachelor's degree in an appropriate discipline and some related technical experience as engineering designer or equivalent combination of education and experience is a plus.
        -Experience in Design and Manufacturing is a must.
         
        Job Number: 12096
        Job Location: Canoga Park, CA
        Rate: Open
        Per Diem: Yes
        Overtime: Possible
        Duration: 3 Months+
        Start Date: ASAP
        Input Date: 04/17/2017
        Firm Name: LOGIN CONSULTING SERVICES
        Attention: John Dillon
        Address: 300 CONTINENTAL BLVD STE 530
        City, State: EL SEGUNDO, CA 90245-5067
        Phone: 310/607-9091
        Fax Phone: 310/607-9818
        Website: www.loginconsult.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engineering Designer - Valves IV

        Description:
        A leading Aerospace company, located in Canoga Park, CA, is seeking a Engineering Designer IV- Valves for a 6+ month contract role.

        ** Candidates must have experience with Creo and GD&T. Windchill is strongly desired **

        Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
        Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

        Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


        Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
        Skills:
        Candidates must have experience with Creo, Windchill and GD&T Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
        Engineers also required to analyze and verify product design and performance for adequacy and reliability.
        Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
        Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
        Must be able to prepare and make presentations at both internal and customer design reviews.
         
        Job Number: 11851
        Job Location: Canoga Park, CA
        Rate: Open
        Per Diem: Yes
        Overtime: Possible
        Duration: 6 Months+
        Start Date: May
        Input Date: 04/17/2017
        Firm Name: LOGIN CONSULTING SERVICES
        Attention: Tali Lerea
        Address: 300 CONTINENTAL BLVD STE 530
        City, State: EL SEGUNDO, CA 90245-5067
        Phone: 310/607-9091
        Fax Phone: 310/607-9818
        Website: www.loginconsult.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engineering Designer IV

        Description:
        Engineering Designer IV

        Location: Canoga Park, CA
        Rate: $50.00 - $60.00/HR
        6 month contract

        ** Candidates must be U.S. Citizens **
        ** Permanent residents are NOT eligible for this role **
        ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


        Duties:
        ** Candidates should have experience specifically with flight electronics packaging for space applications **
        ** Candidates should have design experience of electro-mechanical packaging or cable harnesses **
        ** Candidates should be able to design from concept to a drawing released in Creo **

        - Perform engineering design tasks related to space electronics based products.
        - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
        - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts.
        - Position will support various different Electric Propulsion programs

        Skills:
        - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
        - Familiarity with aerospace/defense engineering design and production processes and disciplines.
        - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
        - Extensive experience in PRO-E/CREO CAD design is a must (NX CAD design preferred).
        - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
        - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

        Education:
        - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
         
        Job Number: 6990
        Job Location: Canoga Park, CA
        Rate: $50.00 - $60.00/HR
        Per Diem: Split Possible
        Overtime: Possible
        Duration: 6 mos
        Start Date: ASAP
        Input Date: 04/25/2017
        Firm Name: INCONEN CORPORATION
        Attention: Patrick O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engineering Designer IV / PRO-E/CREO CAD design are a must / Candidates should have experience specifically with flight electronics packaging for space applications CA

        Description:
        Job Title: Engineering Designer IV
        Job Number: 158326/6312362
        Location: Canoga Park, CA
        Compensation: 60/hr max
        Assignment Length: 6 month contract

        Description:


        Duties: ** Candidates should have experience specifically with flight electronics packaging for space applications **

        ** Candidates should be able to design from concept to a drawing released in Creo **

        ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

        Perform engineering design tasks related to space electronics based products.
        Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
        Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

        Skills:
        Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
        Familiarity with aerospace/defense engineering design and production processes and disciplines.
        Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
        Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
        Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

        Keywords:
        Education:
        Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
         
        Job Number: MB-6312362
        Job Location: Canoga Park, CA
        Rate: 60/hr max
        Duration: 6 month contract
        Input Date: 04/24/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Design Engineer V (AZ)

        Description:
        Oversees the development and integration of highly complex equipment and tooling concepts into the production system to satisfy aerospace product design and build requirements. Provides enterprise-wide consultation and guidance for the application of highly complex robotics, automation and new technology to optimize the build plan. Leads cross functional/industry teams and represents Boeing in industry and technical associations Collaborates with the supply base on equipment and tooling build and inspection methodologies. Leads the implementation of best practices into functional process documentation to drive standard work. Consults and provides support for emergent technical issues of significance across the global production system. Leads and mentors others.

        AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience.

        CATIA V5, Enovia.
         
        Job Number: EquipAZ
        Job Location: Mesa, AZ
        Rate: OPEN
        Per Diem: YES
        Overtime: Possible
        Duration: 6+ Months
        Start Date: ASAP
        Input Date: 04/21/2017
        Firm Name: AMERICAN CYBERSYSTEMS
        Attention: Janice Plattner
        Address: 1750 112TH AVE NE STE C228
        City, State: BELLEVUE, WA 98004
        Phone: 425/605-2321
        Fax Phone: 425/558-0688
        Website: www.acsicorp.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer

        Description:
        Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        Required Education and/or Skills:
        AA degree or higher
        CATIA V5
        ENOVIA
         
        Job Number: 25339-1
        Job Location: Mesa, AZ
        Rate: 41.00
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mos
        Start Date: ASAP
        Input Date: 04/18/2017
        Firm Name: APOLLO PROFESSIONAL SOLUTIONS
        Attention: Michelle Fox
        Address: WESTRIDGE OFFICE PARK
        2646 HIGHWAY 109 STE 207

        City, State: WILDWOOD, MO 63040
        Phone: 636/438-0312
        800 Phone: 866/277-3343
        Fax Phone: 636/220-8284
        Website: www.apollopros.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Equipment & Tool Designer III (AZ)

        Description:
        Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

        AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

        Enovia & CATIA V5
         
        Job Number: EquipToolDesAZ
        Job Location: Mesa, AZ
        Rate: TBD
        Per Diem: YES
        Overtime: Possible
        Duration: 6+ Months
        Start Date: ASAP
        Input Date: 04/25/2017
        Firm Name: AMERICAN CYBERSYSTEMS
        Attention: Janice Plattner
        Address: 1750 112TH AVE NE STE C228
        City, State: BELLEVUE, WA 98004
        Phone: 425/605-2321
        Fax Phone: 425/558-0688
        Website: www.acsicorp.com

        Fire Protection Engineer -- Aerospace

        Description:
        Job location: Overseas

        Contact:
        Morgan at (585) 441-9800 x104 or
        Nicholas at (585) 441-9800 x126


        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Overseas/International
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Morgan or Nicholas
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x104 or x126
        Email: morgan.ricklefs@noramtecna.com; nicholas.salsedo@noramtecna.com
        Website: www.noramtec.com

        Fire Protection Test & Analysis Engineer

        Description:

        SUMMARY JOB DESCRIPTION



        -The primary work location will be in Nagoya, Japan. However, depending on the positions applying for, a successful candidate may be required to travel to Moses Lake (WA, USA) and other test sites and stay there where aircraft flight tests are performed on a long term basis.



        -Basic scope of work is to provide assurance of successful showing of compliance with relevant regulatory requirements in the Type Certification Application and Approval processes with regard to fire extinguishing and smoke detection.



        -The main duties and responsibilities of a successful candidate will include having overall responsibility for the planning of the required flight/ground test phases, working with the flight/ground test instrumentation engineers, preparing the maneuver-by-maneuver plan for each test flight or test on ground and develop/review test plans, test specifications and test reports



        -A successful candidate is expected to work flexibly and effectively in a multi-cultural and multi-linguistic environment in Nagoya, Headquarter of our company in Japan. Basic Japanese Language skill is preferable but not required.


        COMMON QUALIFICATIONS



        -Bachelor’s Degree in Engineering with 15 years of aviation related industry experience, or



        -15-20 years in an aviation engineering organization; Aerospace or Aircraft Systems Engineering.



        -Must have excellent written and verbal communication skills in English.



        -Ability to demonstrate interpersonal and communication techniques



        -A good team player who can work in a team environment and coordinate with other engineers from culturally and linguistically diverse backgrounds.



        -Ability to identify potential issues in the course of Type Certification approval process.



        -Ability to adapt successfully to changing situations and environments



        -Ability to dealing with changing priorities and workloads



         



        JOB-RELATED QUALIFICATIONS



        -Thermal analysis
        -Good thermal dynamic background
        -Modeling thermal dynamic, making specification/documentation, request document, required definition report good solution for over heat and under cooling issues, ground/flight test for environment temperature of all aircraft zone such as unpressured area, pressure area, and propulsion area 
        -CFD
        -Good communication in structure engineering


         
        Job Number: 1610058856
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 12/11/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FmfQAAS&URLSource=cjhunter

        Flight Controls Engineer

        Description:
        PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

         
        •  
        • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
        • Applicable coursework or coop/intern experience to this position desired.
        • Working knowledge of generic CAD design tool processes is desired.
        • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
        • Experience with Kinematics in CATIA
        • Flight Controls Systems design experience a plus
        • Must have excellent verbal communication and presentation skills.
        • Proficient with Microsoft Office applications including Word and Excel.
        • Professional demeanor, troubleshooting and organizational skills are necessary.
        • International experience desirable. 
        • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

         
        Job Number: 1610045561
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

        Flight Sciences -- Performance

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Sciences -- Stability & Controls

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Sciences Engineer-Stability & Control

        Description:
        Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

        The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

        Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years’ experience in flight sciences, including:

        Stability & Control
        Aircraft Performance
        6DOF Flight Simulation
        Essential functions:

        Define and validate flight test specifications
        Perform data review and analysis for verification of aircraft level requirements
        Utilize flight simulation models and data
        Support ground and flight test activities
        Prepare flight test reports
        Desired Qualifications:

        Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
        Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
        A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
        Ability to represent the client professionally and positively during client interactions and meetings.
        Bachelor or advanced degree in Aerospace Engineering.
        If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

        Candidates must have legal authorization to work in the United States, Canada or Mexico
         
        Job Location: Seattle, WA
        Per Diem: possible
        Overtime: Yes
        Duration: lt
        Start Date: asap
        Input Date: 07/26/2017
        Firm Name: VELOCITY CONSULTING SOLUTIONS
        Attention: Dawn Bergau
        Address: 20306 15TH AVE NE STE A
        City, State: SHORELINE, WA 98155
        Phone: 206/812-1061
        Website: www.velocity-cs.com

        Flight Simulator Senior Engineer

        Description:
        PDS Tech is seeking a Flight Simulator Senior Engineer for an open position in Nagoya, Japan.

        The primary work location will be in Nagoya, Japan.
        Basic work scope is to coordinate with Suppliers contributing to Flight Simulator Test.
        The responsible Engineer will work the activities related to the Flight Simulator. This will include two activities as follows.
        • Interfacing with all other aircraft functions and engineering teams to coordinate and

        maintain operations of the Flight Simulator.

        • Contact and coordination with suppliers (i.e. CAE, inc.)

        Work as team in a multi-cultural and international working environments in Japan Headquarters. To communicate with Japanese engineers, it is better to have Japanese Language skill.
        Any other activities related to Flight Deck Team.

         
        • Bachelors Degree in Engineering Technical Aviation with 5 years aviation related experience, or
        • 5+ years in an aviation engineering organization Aerospace or Aircraft Systems Engineering.
        • Must have excellent written and verbal communication skills in English.
        • Ability to utilize interpersonal and communication techniques, working in a team environment, dealing with a wide variety of personalities and communication styles.
        • Ability to identify potential issues with machinery development, manufacturing processes or parts.
        • Needs the ability to develop, plan and implement short and long term goal.
        • Ability to adapt to change
        • Basic knowledge about the simulator.
        • Experience in development of Flight simulator.
        • Management/negotiation experience with suppliers to fix the bugs.
        • Experience creating relevant documents.
        • Experience reviewing documents.
        • Communication in Japanese would be helpful but is not a requirement.

         
        Job Number: 1610051035
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 12/11/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ycpWAAQ&URLSource=cjhunter

        Flight Test -- Troubleshooting Processes

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Test Controls Engineer - RM

        Description:
        Johnson Service Group is seeking a Flight Test Controls for a 15+ month contract in West Palm Beach, FL!

        The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

        Description:

        Plan, conduct, manage and report flight control systems and handling qualities flight tests.
        Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
        These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
        Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
        Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
        Utilize Mat lab to analyze flight test data and work with control laws.
        Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
        Experience:

        Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
        Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
        Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
        Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


        Additional Notes

        The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
         
        Job Number: 356488
        Job Location: West Palm Beach, FL
        Rate: $39hr
        Per Diem: yes
        Overtime: yes
        Duration: 15 months
        Start Date: asap
        Input Date: 05/04/2017
        Firm Name: JOHNSON SERVICE GROUP
        Attention: Richard Martinsen
        Address: 950 S BASCOM AVE STE 2122
        City, State: SAN JOSE, CA 95128
        Phone: 408/728-9510
        800 Phone: 866/656-0539
        Fax Phone: 408/271-2701
        Website: www.jsginc.com

        Flight Test Engineer

        Description:
        Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

        We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

        Essential Functions:
        Coordinate test and certification requirements.
        Author flight test and ground test plans including test hazard analysis.
        Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
        Support instrumentation installation as required.
        Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
        Support flight and ground test conduct and data collection.
        Analyze test data and evaluate compliance with regulations.
        Prepare certification test reports.
        Domestic and occasional international travel is required.
        Desired Qualifications:

        5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
        Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
        Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
        Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
        A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
        Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
        Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
        Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
         
        Job Location: Moses Lake, WA
        Per Diem: possible
        Overtime: Yes
        Duration: LT
        Start Date: asap
        Input Date: 12/07/2017
        Firm Name: VELOCITY CONSULTING SOLUTIONS
        Attention: Susan McGlinsey
        Address: 20306 15TH AVE NE STE A
        City, State: SHORELINE, WA 98155
        Phone: 206/812-1061
        Email: smcglinsey@velocity-cs.com
        Website: www.velocity-cs.com

        Flight Test Engineer - Test Pilot School Graduate - Contract-WIC03960-C

        Description:

        PDS is looking for an Flight Test Engineer - Test Pilot School Graduate:

        You have built on your strong academic results with a number of years of employment in a Flight Test Engineer role. You are now interested in expanding your horizons and continue your development as a Flight Test Engineer working in a Flight Test Center. You will have the opportunity to exercise the exceptional theoretical and practical knowledge gained through the conduct of a variety of flight test tasks. This knowledge will directly contribute to the safe and efficient conduct of flight test activities. These activities will support company development or certification testing for the wide range of company products. You will work side by side with Test Pilots to develop test plans and safety assessments and use your exceptional communication skills to liaise with other functional groups in the test center.

        Qualifications
        As our ideal candidate:     



        • You have 3-8 years of flight test experience
        • You have a degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering or graduated from a recognized Test Pilot School
        • You have demonstrated capacity and skills to prioritize and manage large amounts of information.
        • You have a strong understanding of common flight test procedures and requirements.
        • You have an appreciation for the existence of Transport Canada, FAA and EASA Certification processes and procedures (or equivalent military processes)
        • You have the interpersonal skills necessary to work effectively with a variety of individuals, departments and organizations.
        • You have well-developed written and verbal communication skills.
        • You will have an understanding that the flight test environment may require irregular work hours and does require travel.
        • You must be able to be obtain and maintain a FAA Class 3 Medical Certificate.
        • You have a significant number of airborne test conductor experience.


         







         






         
        Job Number: 1610061439
        Job Location: Wichita, KS
        Duration: 12 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Marjorie Santiago-Marquez
        Address: 11828 W CENTRAL STE 100
        City, State: WICHITA, KS 67212-5129
        Phone: 316/729-1800
        800 Phone: 800/333-8644
        Fax Phone: 316/729-1857
        Email: cecjwichita@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G29GAAS&URLSource=cjhunter

        Flight Test Equipment -- Management/Coordination

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test Management

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test Project Engineers

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Ground Support Equipment Design Engineer IV

        Description:
        Ground Support Equipment Design Engineer IV

        Location: Canoga Park, CA
        Rate: $50.00 - $60.00/HR
        Duration: 6 month contract
        Shift: 1st Shift

        ** Candidates must be U.S. Citizens **
        ** Permanent residents are NOT eligible for this role **
        ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

        Duties:
        ** Ground Support Equipment (GSE) experience is required. (Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

        ** Creo and Windchill experience are required **

        ** 10+ years experience and a Bachelors Degree or equivalent is required **
        - Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
        - Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
        - Leads preliminary and critical design review preparations.
        - Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
        - Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
        - Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

        Skills:
        - Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
        - Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
        - In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
        - Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
        - Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
        - Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
        - Pre-verification of CAD models and drawings in the PLM system is also required.
        - Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
        - Expert knowledge of reading and interpreting drawings and related specifications is also required.
        - Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.

        Education:
        - Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
        - Experience in Design and Manufacturing is a must.
         
        Job Number: 7337
        Job Location: Canoga Park, CA
        Rate: $50.00 - $60.00/HR
        Per Diem: Split Possible
        Overtime: Possible
        Duration: 6 mos
        Input Date: 05/03/2017
        Firm Name: INCONEN CORPORATION
        Attention: Patrick O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Ground Support Equipment Design Engineer IV CA

        Description:
        Job Title: Ground Support Equipment Design Engineer IV
        Job Number: 159030/6824055
        Location: Canoga Park, CA
        Compensation: 60/hr max
        Assignment Length: 6 month contract

        Description:

        Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

        ** Ground Support Equipment (GSE) experience is required. (Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

        ** Creo and Windchill experience are required **

        ** 10+ years experience and a Bachelors Degree or equivalent is required **


        Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
        Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
        Leads preliminary and critical design review preparations.
        Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
        Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
        Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

        Skills:
        Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
        Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
        In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
        Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
        Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
        Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
        Pre-verification of CAD models and drawings in the PLM system is also required.
        Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
        Expert knowledge of reading and interpreting drawings and related specifications is also required.
        Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.

        Keywords:
        Education:
        Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
        Experience in Design and Manufacturing is a must.

        # of Positions: 1
         
        Job Number: MB-6824055
        Job Location: Canoga Park, CA
        Rate: 60/hr max
        Duration: 6 month contract
        Input Date: 05/03/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Handfinisher Level 4

        Description:
        PDS Tech is seeking a Handfinisher for an open position in Garden Grove, CA

        Operates production equipment; responsible for manufacturing and assembly Aerospace products. Ability to read and understand drawings, schematics, blue prints, work instructions and use standard machine shop tools. Grind, file, sand and polish metal surfaces to a specified shape and smoothness using hand tools.

        Experience working in an environment of continuous process improvement and a track record of developing and implementing process improvements. AS9100 experience desired. Excellent communication skills, both oral and written. Ability to work overtime as required. English proficiency is required.Requires a high school diploma or its equivalent and 3-5 years of related experience. 
         
        Job Number: 1710063342
        Job Location: Garden Grove, CA
        Duration: 6 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Janelie Pizzetulla
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GAiyAAG&URLSource=cjhunter

        Handfinisher Level 4

        Description:
        PDS Tech is seeking a Handfinisher for an open position in Garden Grove, CA

        Operates production equipment; responsible for manufacturing and assembly Aerospace products. Ability to read and understand drawings, schematics, blue prints, work instructions and use standard machine shop tools. Grind, file, sand and polish metal surfaces to a specified shape and smoothness using hand tools.

        Experience working in an environment of continuous process improvement and a track record of developing and implementing process improvements. AS9100 experience desired. Excellent communication skills, both oral and written. Ability to work overtime as required. English proficiency is required.Requires a high school diploma or its equivalent and 3-5 years of related experience. 
         
        Job Number: 1710063032
        Job Location: Garden Grove, CA
        Duration: 6 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Janelie Pizzetulla
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9XHAA0&URLSource=cjhunter

        Handfinisher Level 4

        Description:
        PDS Tech is seeking a Handfinisher for an open position in Garden Grove, CA

        Operates production equipment; responsible for manufacturing and assembly Aerospace products. Ability to read and understand drawings, schematics, blue prints, work instructions and use standard machine shop tools. Grind, file, sand and polish metal surfaces to a specified shape and smoothness using hand tools.

        Experience working in an environment of continuous process improvement and a track record of developing and implementing process improvements. AS9100 experience desired. Excellent communication skills, both oral and written. Ability to work overtime as required. English proficiency is required.Requires a high school diploma or its equivalent and 3-5 years of related experience. 
         
        Job Number: 1610061578
        Job Location: Garden Grove, CA
        Duration: 9 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Janelie Pizzetulla
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G3HRAA0&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Harpoon Missile Maintenance and Operation Specialist

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        Harpoon Missile Maintenance and Operation Specialist
        (U.S. Citizenship Required*)
        St Charles, MO
        2017-3945

        Responsibilities:
        • Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design.
        • Develops, conducts and evaluates effectiveness of technical training.
        • Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials.
        • Gathers data to support complete proposal development activities.

        Qualification:
        • Candidate must have a Craftsman skills equivalent in a like position/system with minimum 5 years of experience on the Harpoon Missile.
        • Additional Training Instructor skills on Harpoon Missile considered highly beneficial

        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!
         
        Job Number: 2017-3945
        Job Location: St Charles, MO
        Rate: DOE
        Per Diem: No
        Overtime: Possible
        Duration: 12 months
        Start Date: ASAP
        Input Date: 04/19/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: Kelly McCarthy
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Helicopter Ground Test Engineer - RM

        Description:
        Johnson Service Group (JSG) is seeking a Ground Test Engineer for a 15+ month contract opportunity in Stratford, CT!

        No corp to corp or H1B sponsorship.

        Description:

        Ground Test (GT) Engineers are responsible for projects with significant scope and complexity covering the mechanical and structural aspects of Ground Testing helicopter components and systems.
        Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
        This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
        Two large portions of out statement of work involves supplier qualification and fatigue substantiation which correlates laboratory fatigue test strength data with measured flight test loads and the customer's mission spectrum to produce dynamic component retirement times and/or inspection intervals that reduce the chance of catastrophic fatigue fracture to an extremely remote possibility.
        Tasks also include supporting and establishing operating limitations for both flight test programs and fielded aircraft.
        Skills Required:

        Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
        Ideal candidate will have a minimum of a Bachelor of Science in Mechanical or Aerospace Engineering and 12+ years of relevant experience.
         
        Job Number: 356467
        Job Location: Stratford, CT
        Rate: $64hr
        Per Diem: yes
        Overtime: yes
        Duration: 15 months
        Start Date: asap
        Input Date: 05/04/2017
        Firm Name: JOHNSON SERVICE GROUP
        Attention: Richard Martinsen
        Address: 950 S BASCOM AVE STE 2122
        City, State: SAN JOSE, CA 95128
        Phone: 408/728-9510
        800 Phone: 866/656-0539
        Fax Phone: 408/271-2701
        Website: www.jsginc.com

        Instrumentation Engineers

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Instrumentation Technicians

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        KC-46 Maintenance and Operations Specialist

        Description:
        Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

        We are currently searching for the right talent to fill this opportunity:

        KC-46 Maintenance and Operations Specialist
        (U.S. Citizenship Required*)
        Creve Coeur, MO
        2017-3944

        Responsibilities:
        • Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design.
        • Develops, conducts and evaluates effectiveness of technical training.
        • Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials.
        • Gathers data to support complete proposal development activities.
        • Reviews Subcontractor products to ensure defined Learning Objectives would be met

        Qualification:


        *U.S. Citizenship is required by law, regulation, executive order, or government contract.

        Education and Experience:
        Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

        Conditions of Employment:
        Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

        About Our Company:
        Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

        Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

        Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

        Join a team that values your experience!
         
        Job Number: 2017-3944
        Job Location: Creve Coeur, MO
        Rate: DOE
        Per Diem: No
        Overtime: Possible
        Duration: 12 months
        Start Date: ASAP
        Input Date: 04/19/2017
        Firm Name: MOSELEY TECHNICAL SERVICES INC
        Attention: Kelly McCarthy
        Address: 7500 S MEMORIAL PKWY STE 215-R
        City, State: HUNTSVILLE, AL 35802
        Phone: 256/880-0446
        Fax Phone: 256/880-0936
        Website: www.moseleytechnical.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Launch Technician - RM

        Description:
        JSG is looking for a great Launch Tech for our client at Vandenberg AFB, CA. This is a 4+ month contract position.

        No corp to corp or H1B sponsorship.

        Hours: 6:00 AM to 4:00 :PM
        This is a 60-65 Hours per week position

        RESPONSIBILITIES:

        Fabricate and install launch site equipment
        Troubleshoot issues
        Operate heavy machinery
        Work with other technicians and engineers to ensure continued successful launch campaigns

        BASIC QUALIFICATIONS:

        High school diploma or equivalent GED required
        At least 3 years of experience using power tools in a professional capacity

        PREFERRED SKILLS AND EXPERIENCE:

        Associates degree in aerospace technology or equivalent area of study
        Experience working at a rocket launch facility and supporting launch campaigns
        Experience with aircraft/airframe/flight-line/missile/space launch vehicle structures assembly
        Military aviation experience as a a propulsion or airframe technician
        SpaceTEC Certification
        Experience with pneumatic/hydraulic system fabrication
        Experience with orbital or structural welding
        Machinist and steel fabrication skills
        Familiarity with calibrated measuring instruments
        Experience using heavy equipment, including but not limited to, overhead cranes, forklifts and manlifts is a nice to have but not required.
        Ability to read, understand and follow detailed schematics, drawings and instructions
        Ability to gather, verify and arranges data from multiple sources
        Strong working knowledge Microsoft Office (Excel, PowerPoint, Word, Outlook)
        Good written and oral communication skills
        Ability to work with a team and independently
        Ability to pay close attention to details
        Ability to maintain a safe and clean working environment while adhering to company policies, quality policies and industry standards

        ADDITIONAL REQUIREMENTS:

        Willing to work long hours, off-shifts, and weekends
        Ability to maintain a safe and clean working environment while adhering to company policies, quality policies and industry standards
        General physical fitness is required for some work areas. Flight hardware typically is built in tight quarters and physical dexterity is required
        Ability to work at elevated heights
        Periodic work in extreme outdoor environments: heat, cold, wind, rain
        Must pass Vandenberg Air Force base background check
         
        Job Number: 355530
        Job Location: Vandenberg AFB, CA
        Rate: $30hr
        Per Diem: yes
        Overtime: yes
        Duration: 4+ months
        Start Date: asap
        Input Date: 05/04/2017
        Firm Name: JOHNSON SERVICE GROUP
        Attention: Richard Martinsen
        Address: 950 S BASCOM AVE STE 2122
        City, State: SAN JOSE, CA 95128
        Phone: 408/728-9510
        800 Phone: 866/656-0539
        Fax Phone: 408/271-2701
        Website: www.jsginc.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Loads Engineer CA

        Description:
        Job Title: Loads Engineer
        Job Number: 158772/8755
        Location: San Diego, CA
        Compensation: DOE
        Assignment Length: contract

        Description:

        Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

        We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

        We have an exciting opportunity for a Loads Engineer in our Mechanical Engineering Department. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems.

        DUTIES AND RESPONSIBILITIES:

        •Responsible for performing loads analysis of aircraft components, assemblies, and systems.
        •Loads analysis includes calculation of aerodynamic and inertial flight loads, landing, ground operations, and ground support equipment loads.
        •Calculate loads by way of classical and computer methods, and develop new methodologies for load development.
        •Generate documentation to support design and airworthiness certification.
        •A working knowledge of JSSG, Mil-Spec, and FAA airworthiness requirements is advantageous.
        •Experience with aeroelastic loads development, closed-loop flight control systems, in-flight testing, and explicit time domain analysis for loads development is desirable.
        •Must be familiar with loads development, statics, dynamics, aerodynamics, stability and control, and vibrations.
        •Must be familiar with gusts, landing simulations, and flutter.


        *Job Qualifications

        •Typically requires a bachelor's degree, master's degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; Twelve or more years of experience with a bachelor's degree or two or more years of experience with a master's degree.
        •Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
        •Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
        •Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks.
        •Must have the ability to perform FEA on composite airframes/structures.
        •Desirable: Working knowledge of panel codes, NASTRAN, or ABAQUS software is preferred.
        •Experience in the aerospace or related industry and with loads analysis and loads development experience.
        •Desirable: Knowledge of aeroelastic systems, closed-loop flight control systems, flutter, and in-flight testing.
        •Experience with Matlab, Excel, Visual Basic, panel codes, NASTRAN, ABAQUS, or other loads development software.
        •Able to work extended hours as required.


        Qualifications

        Essential Qualifications

        • Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD.

        • May substitute equivalent engineering experience in lieu of education.

        • Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

        • Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment.

        • Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.

        • Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems.

        • Must be able to work both independently and in a team environment. Able to work extended hours as required.

        • A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.


        City San Diego
        State California
        Travel Percentage Required None
        Clearance Required? No
        Temp Assignment Duration (# of Days) 365
         
        Job Number: DW-8755
        Job Location: San Diego, CA
        Duration: 12 month contract
        Input Date: 05/15/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Machinist Level 4

        Description:
        PDS Tech is seeking a CNC Machinist in Garden Grove, CA. 
        • • Perform CNC set ups, operate and troubleshoot CNC mills 

          • Understand, write and edit Gibbs CNC programming routines. 

          • Verify dimensions of machined parts. 

          • Communicate regularly with supervisors and other employees regarding any production issues and ways to eliminate possible errors on set-up and/or programming. 

          • Evaluate and update “estimated to actual” cycle times. 

          • Focus on set-up and run time reduction. 

          • Maintain shop areas including cleaning, organizing tools, etc. 

        Minimum Requirements: 

        • Must have a High School Diploma or equivalent. Technical/vocational training/certification desired. 

        • 5+ years’ experience as CNC machinist in 3 & 4 axis. 

        • Ability to work within .0002” tolerance. 

        • Experience in the machining of various materials and metals including Aluminum, Copper, Brass, Invar, etc. 

        • CNC related knowledge including speeds and feeds. 

        • Experience working with Fadal and Haas CNC equipment desired. 

        • Prior aerospace, machining or automotive industry experience desired. 

        • Ability to read and understand drawings, schematics, blue prints, work instructions and use standard machine shop tools. 

        • Experience working in an environment of continuous process improvement and a track record of developing and implementing process improvements. AS9100 experience desired. 

        • Good interpersonal skills and ability to work effective with others. 

        • Excellent communication skills, both oral and written. English proficiency is required. 

        • Needs to be self-motivated and work independently on assignments with minimal oversight or direction. 

        • Ability to interact effectively with supervision, management and customer representatives. 

        • High attention to detail and data accuracy. 

        • Knowledge of all inspection equipment to perform job duties including height gages, micrometers, calipers, depth gages, etc. 

        • Knowledge of basic shop math and GD&T required. 

        • Demonstrated knowledge of workplace Health & Safety requirements. 
         
        Job Number: 1710065455
        Job Location: Garden Grove, CA
        Duration: 6 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Israel Ireneo
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000021XLwAAM&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Manufacturing Design Engineer

        Description:
        •    Lead Mfg. Engineer for Wings, Pylons, Winglets, Doors, Engine Inlets/ Nacelles, Flaps, Ailerons and Windshields - performed design reviews including structural and systems integration; created/ oversaw all build planning, router creation, Bills of Materials, tooling, and work instructions for assembly and installation
        •    Defined machining methods, tooling, and cutter selection for CNC and manual machining of hard and soft metals, including aluminum and exotic metals such as 10-2-3 and 6-4 titanium, CRES steels, Inconel, Zr2, and many others
        •    Took control of a Project that was severely disorganized, 30% over-budget, and six months behind schedule by successfully bringing in machines and developing the broaching process holding costs to less than 15% over-budget and less than 2 months past scheduled due date
        •    Project Eng. on several large machined parts and assemblies to include all tool design, part programming, machining and assembly planning operation sheets, electronic Bills of Material, kitting, work flow, and task sheets for all major commercial and military customers including Boeing, Cessna, Hawker Beech, Lockheed Martin, Gulfstream, Learjet/ Bombardier, Canadair, and Airbus
        •    Extensive knowledge of all methods of sheet metal forming to include hand, brake, hydro-form, hot forming, hot joggling, super plastic forming, and stretch forming
        •    Knowledge of manufacturing carbon fiber composites including hand lay-up, trimming, drilling, assembly, and bonding
        •    Extensive Program/ Project Management including vendor selection, plant floor scheduling, creating project files, GANTT charts, process flow charts, track job progress, assign resources, etc.
        •    Thorough knowledge of chemical and physical processing of metallic and composite parts including heat treating, priming, painting, anodizing, NDT, etc., reduced amount of outside services required in the manufacturing processes to save time and money for the company
        •    Member of several IPT’s (Integrated Product Teams) auditing suppliers to determine manufacturing and quality capabilities and developing vendors to better their processes and supply high quality assemblies for use at final assembly or installation
        •    Mfg. Eng. Lead for implementation of new ERP system to define methods for Bills of Material, work instructions, routers, tooling orders, production planning, scheduling, and purchasing
        •    Negotiate Long Term Agreements with customers and vendors
        •    Lead Lean Six Sigma manufacturing initiatives
        •    Identify and recommend new equipment purchases throughout the division to include lathes, CNC and manual mills, grinders, hand tools, etc.

        Manufacturing Engineering/ Project Engineering / Project Management
        •    Integral part of the Sales Team to garner new business and increase sales and profitability estimating and quoting for internal and external customers with ratios as high as a 65% win rate with a minimum of 10% profit margin
        •    Primary technical focal for customers and vendors

        Quality Assurance/ Quality Control
        •    Develop business processes and procedures per AS9102 required for two Green Field Startups as applicable to the Manufacturing and Tooling Engineering Departments
        •    Train Quality Assurance, shop floor, and engineers on proper inspection techniques for the aerospace industry
        •    Reduced Nonconformances by 62.5% and $400k in 5 months implementing stringent process improvements, training for inexperienced operators, and clear work instructions

        Management
        •    Build and develop cross-functional teams to include developing team members’ personal and professional growth using mentoring, instruction, and other personal development tools (F.Y.I. book, etc.)
        •    As the Mfg. Eng. Supervisor, lead a team of up to (21) Mfg. Eng.’s, Tool Designers, Tool Makers, and Metrologists
        •    Developed a metrics based system for Personal Performance Appraisals ensuring metrics do not rely on personalities but rather on actual quality and content of work completed
        •    Performed capacity and manpower assessments to increase or decrease head count across the entire organization using Lean Six Sigma tools
        •    Conduct high-level reviews with senior management up to and including President and CEO with exemplary compliments on professionalism, candor, and command of the situation
        •    Primary Manufacturing technical representative at CCB (Change Control Board) having final approval for technical changes and incorporation
        •    Conduct one-on-one and team-to-team reviews
        •    Informal leader performing peer-to-peer reviews with departmental and inter-departmental supervisors, managers, and senior managers to address personnel and personal issues
        •    Lead departmental supervisory/ managerial Staff meetings
        •    Constant development of leadership skills through on-line and classroom based learning, research, and mentoring
         
        Job Number: 23155JM
        Job Location: Greensboro, NC
        Rate: $45- 50 Per Hour
        Per Diem: NO Per Diem
        Overtime: Yes
        Duration: 13-18 months
        Start Date: ASAP
        Input Date: 04/17/2017
        Firm Name: YOH SERVICES
        Attention: Jess McKeown
        Address: STE 100
        11960 WESTLINE INDUSTRIAL DR

        City, State: ST LOUIS, MO 63146-3212
        Phone: 314/275-1218
        800 Phone: 800/298-0666
        Website: jobs.yoh.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Manufacturing Engineer

        Description:
        General Summary:
        The Manufacturing Engineer position is responsible for the creation of planning, sequencing and designing.

        Duties and Responsibilities:
        1. Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment.
        2. Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications.
        3. Develops solutions for production problems relating to materials, manufacturing processes and/or the right tooling.
        4. Interprets engineering drawings to determine requirements meet objectives. Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor.
        5. Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
        6. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
        7. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
        8. Ensures completed tasks have been performed and inspected in accordance with company standards. Identifies and corrects all production and manufacturing issues.
        9. Prepares assembly data sheet and updates planning data sheets. Assist with BOM identification and control. Prepares and monitors tool orders and first article inspection sheets.
        10. Details and assembles methods planning and tool manufacturing planning.

        Education, Experience, Certification and/or Licensure:
        1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
        2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
        3. 5+ years experience in aerospace industry in aerospace manufacturing.
        4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

        Knowledge, Skills and Abilities:
        1. Strong analytical skills.
        2. Ability to read and interpret engineering drawings and/or specifications requirements.
        3. Excellent oral and written communication skills.
        4. Excellent problem solving skills.
        5. Ability to work in a diverse environment.
        6. Excellent communication and presentation skills.
        7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
        8. Ability to multitask.
        9. Strong organizational skills.
        10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
        11. Working knowledge of or exposure to Lean Manufacturing tools.
         
        Job Number: 54654JM
        Job Location: Greensboro, NC
        Rate: $45 per hour
        Per Diem: NO Per Diem
        Overtime: Yes
        Duration: 13-18 months
        Start Date: ASAP
        Input Date: 04/17/2017
        Firm Name: YOH SERVICES
        Attention: Jess McKeown
        Address: STE 100
        11960 WESTLINE INDUSTRIAL DR

        City, State: ST LOUIS, MO 63146-3212
        Phone: 314/275-1218
        800 Phone: 800/298-0666
        Website: jobs.yoh.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Manufacturing Engineer

        Description:
        A Leading Aerospace company, located in Canoga Park, CA, is seeking a Manufacturing Engineer II/III for a 12+ month contract role.

        ** Candidates must be U.S. Citizens **

        ** Permanent residents are NOT eligible for this role **

        ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

        The candidate(s) will be expected to perform complex business and manufacturing responsibilities involving producibility studies, manufacturing cost estimating, Make-Buy decisions, process capabilities and risk assessments, tooling design, machine loading and hardware scheduling, and developing detail working instructions.
        The candidate will have a strong knowledge of; (1) engineering design reviews, drawings and specifications; (2) various machining methods, tooling requirements and material handling procedures; (3) and manufacturing support processes including hardware planning, risk assessments, MBOM and scheduling.

        Skills:

        Pro-e or equivalent modeling experience (Catia is acceptable as an equivalent to Pro-E.).
        Windchill or equivalent PLM system experience.
        Oracle or other equivalent ERP system experience (Oracle is very strongly preferred as the ERP experience. SAP might be considered but it is not ideal).
        Basic manufacturing, machining, or assembly experience.

        Education:

        BS in engineering or manufacturing technology or minimum 7 years of experience.
         
        Job Number: 12005
        Job Location: Canoga Park, CA
        Rate: Open
        Per Diem: Yes
        Overtime: Possible
        Duration: 1 Year+
        Start Date: April
        Input Date: 04/17/2017
        Firm Name: LOGIN CONSULTING SERVICES
        Attention: Tali Lerea
        Address: 300 CONTINENTAL BLVD STE 530
        City, State: EL SEGUNDO, CA 90245-5067
        Phone: 310/607-9091
        Fax Phone: 310/607-9818
        Website: www.loginconsult.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Manufacturing Engineer I & II (Seal Beach)

        Description:
        SUPPORTING SAP IMPLEMENTATION

        This position is for the Boeing Engineering Parts Technical Support department (EPTS) under Boeing’s Emergent Build Center (EBC). EPTS operates and provides round-the-clock customer support on a 24 hour 7 days a week basis. EPTS provides engineering subject matter expertise for spare parts manufacturing and operations.

        Job Responsibilities:
        ● Provide immediate, rapid and diligent engineering response to our customers’ technical inquiries related to spare parts manufacturing for out-of-production aircraft.
        ● Review, approve and process Spares Material Authorization License (Authority to Manufacture) requests. Manufacturing Engineer will need to analyze, investigate and internal manufacturing capabilities prior to SMAL fulfillment.
        ● Make recommendations for spares configurations on customers’ Authority to Manufacture requests.
        ● Handle general quotes and orders by acknowledging requests, cataloging parts in IT systems, validate parts history, determine replacements/inter-changibility, and recommend preferred configurations to resolve manufacturing and supplier related issues.
        ● Perform producibility assessments for part or product designs.
        ● Demonstrate knowledge in manufacturing processing such as machining, milling, welding, brazing, sheet metals, breakform, handform, extrusion, forging, rolling, bending and casting.
        ● Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configurations.
        ● Interact primarily with internal personnel, inter-organizational and external customers on routine matters.
        ● Create quote back up sheets to provide suppliers’ summaries of part manufacturing requirements.
        ● Support computerized systems transition from Boeing Legacy systems to SAP and perform data cleansing activities.
        ● Work effectively and cooperatively with direct team members, supervisors, and other cross-departmental teams.
        ● Must be flexible to changing working schedules to provide coverage and support 24 x 7 operations
        ● Must be willing to work on Weekends and Holidays on-site
        ● Must be willing to work 2nd (afternoon to evening) and 3rd (evening to morning) shifts


        Desired Skills:
        ● Familiarity with SAP a plus
        ● Background in Aerospace manufacturing a plus
        ● Establish and maintain good working relationships by helping people feel valued, appreciated, and included in discussions
        ● Place high priority on team and/or organization goals
        ● Demonstrate enthusiasm, energy and motivation
        ● Proactive in offering assistance to direct team members, supervisor, and cross-departmental teams.
        ● MS Office (Word, Excel, Powerpoint, Outlook, Project) productivity and computing skills

        ●Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering is preferred.
        ● 2+ years of manufacturing and/or machine shop environment experience
        ● General knowledge of supply-chain manufacturing and procurement processes
         
        Job Number: MFGEca
        Job Location: Seal Beach, CA
        Rate: up to $50/hour
        Per Diem: YES
        Overtime: Possible
        Duration: 12+ Months
        Start Date: ASAP
        Input Date: 05/26/2017
        Firm Name: AMERICAN CYBERSYSTEMS
        Attention: Janice Plattner
        Address: 1750 112TH AVE NE STE C228
        City, State: BELLEVUE, WA 98004
        Phone: 425/605-2321
        Fax Phone: 425/558-0688
        Website: www.acsicorp.com

        Manufacturing Engineer II

        Description:
        PDS Tech is seeking a Manufacturing Engineer II for an open position in Savannah, GA.

        Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning). 

        Principal Duties and Responsibilities:

        Essential Functions:
        1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
        2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
        3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
        4. Investigate and assist in preparing justification for equipment and facility requests.
        5. Perform productibility studies from engineering drawings.
        6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
        7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
        8. Incorporate Lean Manufacturing Methodology into existing and future processes.
        9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
        10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
        11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
        12. Support all Safety, Sustainability and Ergonomic Initiatives.
        13. Aid in development and maintenance of Business Continuity Plan. 

        Additional Functions:
        1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
        2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
        3. Perform other duties as assigned. 

        Other Requirements:
        1. Proven knowledge of Lean and/or Six Sigma principles.
        2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
        3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
        4. Lean Six Sigma Greenbelt Certification or higher preferred.

         


        Education and Experience Requirements:
        Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.



        Unique Skills:



        Must have experience as a floor liaison Mfg. Engineer at an Aerospace OEM. Proficiency in Solumina, Catua, SAP, and Microsoft Office software highly preferred.




        PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.


         
        Job Number: 1610051893
        Job Location: Savannah, GA
        Duration: 6 months
        Input Date: 12/11/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Rodney Kinlaw
        Address: 900 CIRCLE 75 PKWY SE STE 600
        City, State: ATLANTA, GA 30339
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000001siRgAAI&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical Design Engineer II

        Description:
        Mechanical Design Engineer II
        Long Beach, CA
        Long Term Contract
        $33.29-43.28

        Unique Skills:
        Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams. Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems. Attention to visual appearance/aesthetics of completed designs is very important. Excellent communication skills and ability to work with operations technicians on the shop floor is required. Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus. • Bachelors or higher degree in Mechanical or Aerospace Engineering at an accredited 4 year University preferred. • Minimum of 18 months related engineering experience with a Bachelor's degree. • Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. • Experience with Catia V5 and AutoCAD preferred. • Strong written and verbal communication skills required.

        Education and Experience Requirements:
        Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

        Position Purpose:
        Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

        Principal Duties and Responsibilities:

        Essential Functions:
        1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

        Additional Functions:
        1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

        Other Requirements:
        1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
        Languages Required (in addition to English): None
         
        Job Number: 7277
        Job Location: Long Beach, CA
        Rate: 33.29-43.28
        Per Diem: Possible Split
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 06/05/2017
        Firm Name: INCONEN CORPORATION
        Attention: Brad
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical Designer - ProE CREO

        Description:
        Title: Mechanical Designer - CREO
        Location: Jupiter, FL
        Duration: 4+ month contract

        Duties:

        Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design. This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts. Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
        Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements. Applicant must have prior turbomachinery design or development experience.
        Key Words/Requirements:
        • Proficient experience using CREO 2.0 CAD System
        • Experienced user of Windchill PLM System
        • Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
        • Excellent experience in the creation of mechanical engineering drawings
        • 9+ Years of related Aerospace Industry experience
        • Turbomachinery experience
        Skills: Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and profecient use of Windchill PLM System. Advanced surfacing and modeling skills preferred. Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M. Ability to create mechanical engineering drawings, and related specifications. Ability to write clearly and concisely. Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements. Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
        Key Words/Requirements:
        • Proficient experience using CREO 2.0 CAD System
        • Experienced user of Windchill PLM System
        • Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
        • Excellent experience in the creation of mechanical engineering drawings
        • 9+ Years of related Aerospace Industry experience
        • Turbomachinery experience
        Education Bachelor’s or Master’s degree in an appropriate engineering discipline. 9+ years of rocket propulsion design experience preferred.
        Languages: English Read Write Speak
         
        Job Number: RB367334
        Job Location: Jupiter, FL
        Rate: 60
        Duration: 4 months
        Start Date: ASAP
        Input Date: 04/17/2017
        Firm Name: CDI CORPORATION
        Attention: Rashmi Bhalla
        Address: 17177 PRESTON RD STE 300
        City, State: DALLAS, TX 75248
        Website: www.cdicorp.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical Systems (Flight Test)

        Description:
        Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They are a rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and support staff.

        We are seeking full-time Aerospace Engineers with Mechanical Systems experience to join our Flight Test Team at our office in Seattle. If you have 4+ years of experience in Mechanical Systems, we would like to speak with you.

        • Aerospace engineering experience in Mechanical Systems, including experience in at least one of the following: Mechanical Systems, Flight Control Systems, Landing Gear Controls, Hydraulic System and/or Brake Control Systems utilized in aircraft
        • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
        • 4+ years of aerospace experience.
        • Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
        • Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
        • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
        • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
        • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
         
        Job Location: King
        Input Date: 07/26/2017
        Firm Name: VELOCITY CONSULTING SOLUTIONS
        Attention: Miguel Calderon
        Address: 20306 15TH AVE NE STE A
        City, State: SHORELINE, WA 98155
        Phone: 206/812-1061
        Website: www.velocity-cs.com

        Mechanical Systems -- Braking, Gearing, Pneumatics

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical/Design Engineer/Custom Interior/Mechanical Components

        Description:
        Mechanical/Design Engineer/Custom Interior/Mechanical Components
        Long Beach, CA
        Rate: $41.77-$54.30

        Unique Skills:

        Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams. Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems. Attention to visual appearance/aesthetics of completed designs is very important. Excellent communication skills and ability to work with operations technicians on the shop floor is required. Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus. • Bachelors or higher degree in Mechanical or Aerospace Engineering at an accredited 4 year University preferred. • Minimum five (5) years in the specific technical discipline or ten (10) years broad engineering experience in several technical disciplines with Bachelor's degree, • Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. • Experience with Catia V5 and AutoCAD required. • Strong written and verbal communication skills required.


        Education and Experience Requirements:

        Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

        Position Purpose:

        Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

        Principal Duties and Responsibilities:

        Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

        Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
         
        Job Number: 7276
        Job Location: Long Beach, CA
        Rate: $41.77-$54.30
        Per Diem: Split Possible
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 07/19/2017
        Firm Name: INCONEN CORPORATION
        Attention: Brad Becker
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        NC Programmers - Composites or Metallics **HOT**

        Description:
        UGNX or Catia V5
        *Composites or Metallics
        Two (2) to four (4) years of N/C Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
        Aerospace manufacturing experience preferred.
        Unigraphics and/or CATIA are the preferred systems.
        3, 4, and 5 axis experience
        Familiarity with Windows environments and office tools.
        Machinist experience preferred.
        Familiarity with Vericut preferred
        Email resume to: mmccarthy@pdstech.com
         
        Job Number: GKN-MO
        Job Location: St. Louis, MO
        Rate: $60.00
        Per Diem: Possible
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 08/07/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Mary Ann McCarthy
        Address: 1215 FERN RIDGE PKWY STE 231
        City, State: ST LOUIS, MO 63141
        Phone: 314/628-9143
        800 Phone: 800/472-3737
        Fax Phone: 314/628-9485
        Website: www.pdstech.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        NX CAD DESIGNER III / NX, Teamcenter and GD&T WA

        Description:
        Job Title: NX CAD Designer
        Job Number: 159139/7006475
        Location: Redmond, WA
        Compensation: 56/hr max
        Assignment Length: 4 month contract

        Description:


        Duties: Create Aerospace engineering designs, drawings, and 3D CAD models under minimal direction from engineering staff. Perform tolerance studies as required on complex assemblies. Manage CAD data files and architecture. Expert knowledge of NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System. Must have mechanical engineering experience and ability to work independently. Experience with complex components and assemblies. Proficient at creating mechanical engineering drawings. Experience with high pressure and high temperature systems desired.

        Skills: Effective interpersonal and communication skills. Operate effectively in a team environment.
        Proficient experience using NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System. Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing. Ability to read and interpret mechanical engineering drawings and related specifications. Ability to write clearly and concisely. Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports. Proven skills with NX CAD Tool.

        Key Words/Requirements:

        Proficient experience using NX CAD System TeamCenter Unified Architecture and TeamCenter Engineering PLM System Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
        Excellent experience in the creation of mechanical engineering drawings
        9+ Years of related Aerospace Industry experience


        Keywords:
        Education: BS in mechanical engineering discipline and 9 years of experience or equivalent combination of education and experience.
        # of Positions: 1

        Location:
        Redmond, WA
        11411 139th Place NE,

        Schedule Notes: 9/80 schedule. OT possible.
         
        Job Number: MB-7006475
        Job Location: Redmond, WA
        Rate: 56/hr max
        Duration: 4 month contract
        Input Date: 05/01/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        NX CAD Designer

        Description:
        A leading Aerospace company, located in Redmond, WA, is seeking a NX CAD Designer III for a 5+ month contract role.

        Duties:
        Create Aerospace engineering designs, drawings, and 3D CAD models under minimal direction from engineering staff. Perform tolerance studies as required on complex assemblies. Manage CAD data files and architecture. Expert knowledge of NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System. Must have mechanical engineering experience and ability to work independently. Experience with complex components and assemblies. Proficient at creating mechanical engineering drawings. Experience with high pressure and high temperature systems desired.

        Skills:

        Effective interpersonal and communication skills. Operate effectively in a team environment.

        Proficient experience using NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System. Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing. Ability to read and interpret mechanical engineering drawings and related specifications. Ability to write clearly and concisely. Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports. Proven skills with NX CAD Tool.

        Key Words/Requirements:

        Proficient experience using NX CAD System
        TeamCenter Unified Architecture and TeamCenter Engineering PLM System
        Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
        Excellent experience in the creation of mechanical engineering drawings
        9+ Years of related Aerospace Industry experience

        Education:

        BS in mechanical engineering discipline and 9 years of experience or equivalent combination of education and experience.
         
        Job Number: 12077
        Job Location: Redmond, WA
        Rate: Open
        Per Diem: Yes
        Overtime: Possible
        Duration: 6 Months+
        Start Date: ASAP
        Input Date: 04/17/2017
        Firm Name: LOGIN CONSULTING SERVICES
        Attention: AJ Sarbuland
        Address: 300 CONTINENTAL BLVD STE 530
        City, State: EL SEGUNDO, CA 90245-5067
        Phone: 310/607-9091
        Fax Phone: 310/607-9818
        Website: www.loginconsult.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        NX CAD Designer III

        Description:
        NX CAD Designer III

        Location: Redmond, WA
        Rate: $50.00 - $56.00/HR
        Duration: 3+ month contract


        Duties:
        - Create Aerospace engineering designs, drawings, and 3D CAD models under minimal direction from engineering staff.
        - Perform tolerance studies as required on complex assemblies.
        - Manage CAD data files and architecture. Expert knowledge of NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System.
        - Must have mechanical engineering experience and ability to work independently.
        - Experience with complex components and assemblies.
        - Proficient at creating mechanical engineering drawings. Experience with high pressure and high temperature systems desired.


        Skills:
        - Effective interpersonal and communication skills.
        - Operate effectively in a team environment.
        - Proficient experience using NX CAD System, TeamCenter Unified Architecture and TeamCenter Engineering PLM System.
        - Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
        - Ability to read and interpret mechanical engineering drawings and related specifications.
        - Ability to write clearly and concisely.
        - Knowledge of design practices, manufacturing techniques and inspection requirements.
        - May require the use of various computer systems to produce data, analysis and reports.
        - Proven skills with NX CAD Tool.


        Key Words/Requirements:
        - Proficient experience using NX CAD System
        - TeamCenter Unified Architecture and TeamCenter Engineering PLM System
        - Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
        - Excellent experience in the creation of mechanical engineering drawings
        - 9+ Years of related Aerospace Industry experience


        Education:
        - BS in mechanical engineering discipline and 9 years of experience or equivalent combination of education and experience.
         
        Job Number: 7288
        Job Location: Redmond, WA
        Rate: $50.00 - $56.00/HR
        Per Diem: Split Possible
        Overtime: Possible
        Duration: 3+ mos
        Input Date: 04/26/2017
        Firm Name: INCONEN CORPORATION
        Attention: Patrick O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Performance Engineer / strong dynamics background, ADAMS program, hydraulic damping experience, oil volume ratio monitoring / static/dynamic loads, retraction and vibration analysis for landing gear OH

        Description:
        Job Title: Performance Engineer
        Job Number: 158858/8057
        Location: Independence, OH
        Compensation: 70-75/hr
        Assignment Length: 12 month contract

        Description:

        Pay Rate max - $70-75/hour, depending on their experience and knowledge.
        12 month + assignment


        **Looking for an advanced concept developer, strong dynamics background, ADAMS program, hydraulic damping experience, oil volume ratio monitoring. Does not necessarily have to have aerospace background, automotive could work as well.


        Reporting to the Lead Engineer, you will be responsible for performing static/dynamic loads, retraction and vibration analysis for landing gear in response to regulatory / customer requirements and UTAS performance methodologies. You will also conduct sensitivity studies, perform trade studies, generate design study summary reports, prepare and present results to the customer at program reviews.

        Primary Responsibilities:
        • Provide technical guidance for all performance related tasks of the project assigned while working with the following:
        o Lead Engineer to ensure that performance tasks are properly managed to achieve project goals
        o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements
        o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust trouble-free product is developed
        • Executes performance activities including:
        o Customer / Suppliers:
        o Liaise with customer/Suppliers for all performance related tasks
        o Foster strong customer relationships through accountability, transparency and credibility
        • Integration / Planning:
        o Responsible and accountable for all performance tasks and its completion dates
        o Communicates progress and roadblocks to the Lead Engineer
        o Requires a good understanding of landing gear shock strut and actuation principles and operation.
        • Responsible for performing
        o Static/dynamic loads and vibration analysis for landing gear, actuation and subsystem structural design criteria;
        o Perform derivation of design loads and analysis of dynamic performance to ensure that customer and certification requirements are satisfied;
        o Develop the structural dynamics models and compute dynamic loads;
        o Perform systems hydraulic simulations
        o Develop operational and certification performance reports
        o Compute landing gear dynamic loads and landing impact for optimizing landing gear absorption characteristics
        o Perform dynamic analysis for optimizing retraction timing
        o Identify critical loading conditions and documentation of results in formal Engineering Reports
        o Be responsible for the providing detail sizing definition to designers and stress analysts.
        • Compliance
        o Ensures compliance to UTAS-LS Engineering methodologies
        o Maintains compliance to ITAR and regulatory requirements
        o Occasional travel between customer/suppliers and UTAS locations
        o Perform other duties as required


        Basic Qualifications

        Bachelor's degree in Mechanical or Aerospace Engineering
        • A minimum of 8 years of experience in analysis tools and techniques
        o 5 years of experience within the Aerospace industry; must include extensive experience in development of transport and / or military type aircraft
        • Demonstrated experience using ADAMS, Matlab / Simulink
        • Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
        • Demonstrated ability to utilize Catia V5
        • Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
        • Demonstrated ability to work directly with customers and suppliers
        • Understanding of performance based specification requirements, requirements management and verification.
        • In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
        • Successful candidates must meet all requirements under ITAR & CCGP
        • Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
        • US citizen, permanent resident alien or able to review all export-controlled technical information.
         
        Job Number: DW-8057
        Job Location: Independence, OH
        Rate: 75/hr max
        Duration: 12 month contract
        Input Date: 04/27/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Powerplant Specialists

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Procurement Engineer - Level 3

        Description:
        Procurement Engineer - Level 3

        Location: Tampa, FL
        Pay Rate: DOE ($25/hr - $45/hr)
        Duration: 6 month contract
        Shift: First, 5/40
        Travel: Yes; Lackland AFB San Antonio, TX
        ***MUST have an ACTIVE SECRET CLEARANCE***

        Description
        -Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
        -Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
        -Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
        -Facilitate technical trade-offs and standardization that may lead to more economical procurement.
        -Recommends design changes or process improvement to mitigate production issues.
        -Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
        -Provides technical solutions to a wide range of difficult problems.
        -Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
        -Works under general direction only and independently determines and develops approach to solutions.
        -Work is reviewed upon completion for adequacy in meeting objectives.
        -Reports directly to the Lead Procurement Engineer on the C-5 program.
        -Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
        -Experience with requirements management and flowdown to supplier.
        -Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
        -Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

        Skill/Experience/Education (MANDATORY):

        -Quality Assurance (4-5+ years experience)
        -Supplier Quality Assurance (4-5+ years experience)
        -Hardware Engineering (4-5+ years experience)
        -Test Verification/Validation (4-5+ years experience)
        -Configuration Management (4-5+ years experience)
        -ISO 9001: 2008 training (required)
        -AS9100C training (required)
        -Lockheed Martin Procure 2 Pay (P2P) training (required)
        -Auditor training (required)
        -Engineering or Technical 4-year Degree
        -Process Improvement
        -Purchase Orders
        -Physical and Software Configuration Audits
        -Source Inspections
        -QMS
        -Risk Assessment
        -ASQ
        -Corrective Action and Prevention
        -Reliability
        -Logistics
        -Excel


        Desired:
        -Subcontracts Management (0-3+ years experience)
        -Systems Engineering [aircraft avionics systems] (0-3+ years experience)
        -Green Belt/Black Belt Certification
         
        Job Number: 7345
        Job Location: Tampa, FL
        Rate: 25-45
        Per Diem: Split Possible
        Overtime: Yes
        Duration: 6 mos
        Start Date: ASAP
        Input Date: 11/14/2017
        Firm Name: INCONEN CORPORATION
        Attention: Rex Calkins
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Product Engineer / NX MRP actuators gears splines Teamcenter aerospace CA

        Description:
        Job title: Product Engineer
        Job Number: 158969/4575
        Location: Torrance, CA
        Compensation: 50/hr
        Assignment Length: 12 month contract

        Description:

        Product Engineer

        GENERAL FUNCTION:

        This position is responsible for development of complex mechanical and hydromechanical components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Product Engineer devises new approaches for the problems encountered.
        Essential job functions: NATURE AND SCOPE:

        The Product Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military leading and trailing edge flap systems. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Product Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being system or component performance and integration. The incumbent will coordinate the work of drafters, technicians, design analysts, manufacturing engineers and others who assist in specific assignments as needed.


        To be considered for the position of Product Engineer, a candidate should have a minimum of an BS Degree, preferably in Mechanical or Aerospace Engineering plus 10 years of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. Seasoned knowledge of closed loop control systems, mechanical hardware designs, and good communication skills are also necessary.
        Required skills: 1. Person needs to be mechanically inclined. This will be beneficial when troubleshooting issues in the assembly line.
        2. Experience with measuring tools such as micrometers, calipers.
        3. Microsoft Office
        4. Experience with an MRP system
        5. Unigraphics Nx
        6. Teamcenter

        Preferred Experience:
        Experience with actuators, gears and splines preferred.
        Aerospace industry experience preferred.
        Scope: Must have good writing skills. The incumbent will be responsible to writing operations sheets for the manufacturing area.
        Must be a team player, incumbent will be working in a team and will be coordinating with multiple operating groups within the organization.

        Education: BS Degree, preferably in Mechanical or Aerospace Engineering plus 10 years of design/development engineering experience.
         
        Job Number: MB-4575
        Job Location: Torrance, CA
        Rate: 50/hr max
        Duration: 12 month contract
        Input Date: 05/05/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Product Repair/Mod Tech B - SECRET

        Description:
        PDS Tech, Inc. is seeking a Product Repair/Mod Tech B for an open position in Miramar, CA.
        • Disassembles systems components to support the correction of failures or implement changes.
        • Performs routine troubleshooting of pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
        • Performs validation/verification testing of systems and components.
        • Inspects component before installation or usage to verify cleanliness and serviceability of components.
        • Fabricates and modifies aerospace products according to specifications.
        • Performs tasks associated with the safe handling of a aerospace vehicle (e.g. jacking, towing, system operations).
        • Works under general supervision.

        Education / Experience:  
        • High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience.

         
        Job Number: 1710064790
        Job Location: San Diego, CA
        Duration: 12 months
        Input Date: 12/11/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Patrick Mahoney
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000021T7gAAE&URLSource=cjhunter

        Production Planner

        Description:
        PDS Tech, Inc. is seeking Production Planner in Kilgore, TX. 

         Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling, by performing the following duties:
         
        This job family has 5 qualification levels:
        Engineer-Manufacturing 1
        Engineer-Manufacturing 2
        Engineer-Manufacturing 3
        Engineer-Manufacturing 4
        Engineer-Manufacturing 5

        Essential Duties and Responsibilities include the following. Other duties may be assigned.
        1. Know and follow general company and corporate policies and procedures.
        2. Know, understand, and follow department policies and procedures.
        3. Confers with management, engineering and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production processes
        4. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
        5. Estimates production times, staffing requirements, and related costs to provide information for management decisions.
        6. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.
        7. Confers with planning staff concerning product tooling to ensure efficient production methods
        8. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials or parts and evaluates products according to specifications and quality standards
        9. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
        10. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
        11. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
        12. Consults customer specification documents to develop operations routing for all manufactured products.
        13. Other various duties as needed or as assigned.

        Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
         
        Education and/or Experience
        -High school diploma or general education degree (GED);
        -Six months to one year related experience and/or training; or equivalent combination of education and experience.
         
         
        Computer Skills
        To perform this job successfully, an individual should possess basic computer proficiency and functional knowledge with applications and activities including (but not limited to):
        -MasterCAM
        -Syteline Manufacturing software
        -Microsoft Project Management software
        -Microsoft Excel Spreadsheet software
        -Microsoft Word Processing software
         
        Language Skills
        -Ability to read and write the English language.
        - Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. 
        -Ability to write reports, business correspondence, and procedure manuals. 
        -Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
         
         
        Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

        While performing the duties of this Job, the employee is frequently required to sit.  The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. 
         
        Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   
         
        Work is generally performed in a climate controlled office environment. Occasionally exposed to a climate-controlled manufacturing environment with moderate to high levels of noise.
         
        5+ years experience working in production planning in an Aerospace production environment.
         
        • PRODUCE  MASTER FILES PER CUSTOMER REQUIREMENTS
        • STRONG WORKING KNOWLEDGE OF UNDERSTANDING BLUEPRINT DEFINITIONS
        • ERP KNOWLEDGE AND UNDERSTANDING  ALL AREAS OF THE SYSTEM OF VISUAL
        • USING MICROSOFT PRODUCTS FOR DAILY JOB TASKS
        • KNOWLEDGE IN AIRCRAFT SPECIFICATIONS
        • REVIEW P.O’s  TO BE CORRECT TO QUOTATIONS SUBMITTAL FOR JOB
        • A WORKING KNOWLEDGE OF CATIA SOFTWARE FOR PLANNING PURPOSES
        • INVENTORY AND MATERIAL MANAGEMENT
        • REVIEW SPECIFICATIONS REVISION’S FOR CUSTOMER REQUIREMENTS
        • UPDATE PLANNING AND MASTER FILES
        • REVIEW QUALITY REWORK ISSUES FOR SUB-CONTRACT P.O’s

         
        Job Number: 1710066639
        Job Location: Kilgore, TX
        Duration: 4 months
        Input Date: 12/15/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Enrique Perez
        Address: 3201 CHERRY RIDGE DR STE A103
        City, State: SAN ANTONIO, TX 78230-4824
        Phone: 210/524-1496
        800 Phone: 866/570-1503
        Email: cecjsanantonio@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jyvAAA&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Program Manager MN

        Description:
        Job Title: Program Manager
        Job Number: 158511/8034
        Location: Burnsville, MN
        Compensation: 30-50/hr
        Assignment Length: 10 month contract


        Description:

        Pay rate - $30 - 50/hr

        UTC Aerospace Systems is one of the world's largest suppliers of technologically advanced aerospace and defense products. We design, manufacture and service systems and components and provide integrated solutions for commercial, regional, business and military aircraft, helicopters and other platforms. We are also a major supplier to international space programs

        Sensors & Integrated Systems, a business unit of UTC Aerospace Systems, is leading provider of cutting-edge sensors and sensor-based systems for the commercial aerospace and defense industries including electronic flight bags, air data systems, ice detection and protection systems, fuel measurement and management systems, guidance navigation and control systems, health and usage management systems, rescue hoists, mission data recorders and sensing suites for aircraft engines.

        SIS is headquartered in Burnsville, MN and has 4 reporting segments:
        •Air Data, MEMs and Flight Management Systems (AMFMS) with locations in MN and India
        •Inertial, Control and Aircraft Management Systems (ICAMS) with locations in UK, CT and VT
        •De-icing, Rescue and Specialty Systems (DRSS) with locations in CA, OH, WV and France
        •Fire Protection Systems (FPS) with locations in NC, Germany, France and UK

        Lead and manage new product introduction programs with various levels of complexity. Assume primary responsibility for program leadership, business case management, commitment to program success, and building solid business relationships. Successfully manage programs within program scope, schedule and budget while being a recognized leader in analyzing risk and establishing associated contingencies. Collaborate with a wide variety of functional areas inside and outside the organization to develop and provide product definitions responsive to customer needs and market opportunities. Coordinate management and technical decisions while effectively arbitrating and resolving problems associated with both new and existing products and projects. Assist in development of internal strategic plans. Interprets, executes, and manages company-wide division/unit- wide modifications to policies and procedures. Utilizes plans of action to ensure conformance to organization’s goal and initiatives and ensures timely completion.
        Basic Qualifications Search *Education / Certifications

        -BS/MS degree in an engineering discipline, and/or business administration.
        -MBA desired.

        *Experience / Qualifications

        -5 to 10 years program management and/or general leadership experience.
        -PMP certification desired.
         
        Job Number: DW-8034
        Job Location: Burnsville, MN
        Rate: 50/hr max
        Duration: 10 month contract
        Input Date: 04/24/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Project Cost Estimator

        Description:
        PDS is looking for a Project Cost Estimator - Please email resumes to: mmccarthy@pdstech.com or phone: (314) 720-0572 Mary Ann McCarthy
        This position is located in the St. Louis area and would prefer local candidates. Must have 10+ years of experience.  Would consider degree and non-degreed candidates.  Multiple Industrial Projects experience a plus.   *Working with Estimating Equipment *Industrial Experience, Food & Beverage or Pharmaceutical a plus.
        Primavera experience a must.
        **This job is with the highest rated company in St. Louis, MO.  
          Must have the following experience:   *  Project Cost Estimation *  Construction Projects *  Experience Industrial Scale Projects *  Food Background a plus - but not needed *  Involved with Manufacturing Plants  
        This position may require you to submit to and pass a drug test and/or background check. If this is a hands-on position, you may also be required to pass a safety and productivity examination.   PDS Tech, Inc. will comply with all applicable federal and state laws governing the use of such background checks and drug tests   PDS Tech, Inc. is proud to be an Equal Opportunity Employer - Minorities/Female/Disabled/Veteran (EOE M/F/D/V)   Founded in 1977, PDS Tech, Inc. is one of the nation's premier specialty staffing firms with 31 offices nationwide.  We offer a full range of benefits including: - Health insurance - Paid holidays - Weekly payroll - Immediate 401(k) eligibility - Completion bonuses - Training Please note availability of benefits may vary by position.   PDS specializes in Engineering and IT arenas including Aerospace, Defense, Electronics, Telecommunications, Automotive, and Energy just to name a few.  Our reputation, track record, and years of continuous growth reflect the commitment to quality that our employees and clients experience first-hand.   $$$ PDS pays for referrals! $$$ We pay thousands each month in referral bonuses!Contact a recruiter for details.
         
        Job Number: 1710063644
        Job Location: Saint Louis, MO
        Per Diem: No
        Duration: 0 months
        Input Date: 12/11/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Mary Ann McCarthy
        Address: 1215 FERN RIDGE PKWY STE 231
        City, State: ST LOUIS, MO 63141
        Phone: 314/628-9143
        800 Phone: 800/472-3737
        Fax Phone: 314/628-9485
        Email: cecjstlouis@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBaNAAW&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Project Engineer

        Description:
        Background in Aerospace, Mechanical, or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense.
        Must have experience leading IPD Teams in the creation of new designs for aerospace, space or military products. Must have experience with SAP and understanding or processing hardware in concert with SAP.
        The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required.
        Facilitate and lead IPD Team with members from all functions.
        • Planning, execution, coordination and communication of team activities and commitments
        • Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
        • Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs. • Ensure targeted goals (schedule and cost) is communicated to the team members
        • Identify, assess and manage the team’s risks
        • Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
        • Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
        • Meet design and design-to-cost requirements.
        • Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team. Project Engineer