Job Search Results

415 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 11:17AM Pacific Time by ContractJobHunter. )

Listings 1 - 415

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties
• Work independently with limited supervision.
• Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
• Use hydraulic test equipment.

Experience Required
• High School Diploma or Equivalent required
• Aerospace Powerplant and/or Airframe license.
• Min. 2 yrs. experience in Aerospace Maintenance.
 
Job Number: 1910106123
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Flight Mechanics

Description:
STS Technical Services is hiring A&P Flight Mechanics in Ypsilanti, Michigan!

Essential Duties & Responsibilities:
Will be flown to where the aircraft is
Maintain contact with maintenance control regarding aircraft condition
Troubleshoot and accomplish all required servicing of the aircraft including: wheel and brake replacement, engine oil servicing replacing burnt out light bulbs, wiping down struts, etc. Maintain control as work is completed
Perform other duties as directed by the GMM, maintenance control or his supervisor
Qualifications:
Must have A&P License and previous 747 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 42988
Job Location: Ypsilanti, MI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Alcoa, TN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Melbourne, Florida!

Job Summary:
Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Essential Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions
Consults the Maintenance Lead if technical assistance is needed during the repair process
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer
Completes work package documentation by signing/stamping after finishing all designated operations
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness
Provides supervisor with performance statistics and other operational data, as requested
Properly accounts for time and materials used in all inspection and maintenance activities
Qualifications:
High School/GED
A&P and structures experience a plus
A&P License; zero to two years’ experience with aircraft/general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft
Over one year actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools
Assignments require Minimal Knowledge beyond the assigned work
Demonstrates correct understanding of routine aspects of work
Knowledge of machines and tools, including their uses, repairs and maintenance
Knowledge of principles and processes for providing customer service
Skilled with repairing, troubleshooting, installing and equipment maintenance
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48152
Job Location: Melbourne, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Active Secret Clearance is highly preferred, but not required****

Job Description:
1. Candidate will primarily be responsible for developing equipment Installation designs, but may also support structural design activities.
2. Primary design activities will include detail design and release of trays, shelves and racks to support LRU installations, crew station panel designs, and power panel and matrix designs.
3. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T.
4. Candidate must be able to coordinate efforts with minimal supervision with other installation organizations such as ECS and Hydraulics, Harness, Structures, and other Subsystem teams as well as Stress Analysis, Materials and Processes, Manufacturing Engineering/Tooling, Maintainability, etc. across a wide range of functional organizations.
5. Although the primary assignment will be to support retrofit design, could also support mod line issues, production floor support, and field requests and repairs.

Education:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Degree not required but must be experienced in aerospace design.
3. F-16 release system familiarity a plus.
4. Catia V5 design experience required.
 
Job Number: 11283
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.

Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BH-56-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.

Skills/ Qualifications / Experience Sought:

Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BH-55-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Safety Assessment Expert - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Safety Assessment Expert.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Main Responsibilities:

  • Primarily work on the aircraft's safety assessment.
  • Take charge for PRA and CMA.
Skills/ Qualifications / Experience Sought:
  • Over 10 years safety assessment and certification experience.
  • Strong experience of Particular Risk analysis (PRA),especially
  • Survivability of Systems, Aft Pressure Bulkhead Rupture and Tail Strike.
  • Strong experience of Common Mode Analysis or certification.
  • Fluent English, with good communication skills.

 
Job Number: BH-60-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services offers Aircraft Sheet Metal Mechanic jobs for candidates with recent regional jet experience in Saint Louis, Missouri.

Qualifications:
Primary responsibilities will be working heavy checks in the hangar on EMB 145 and CRJ 700 regional jets in hangar and/or line maintenance environments
Must have at least two-to-three years of major sheet metal repair and overhaul experience
Experience working on EMB 145 & CRJ 700
Candidate must be willing to work overtime
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 43887
Job Location: St. Louis, MO
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Nashville, Tennessee.

Job Duties:
Will be working a WiFi project as well as other projects, and heavy checks
Qualifications:
Must have at least 5+ years’ experience on Regional or Commercial aircrafts in an MRO setting (this does NOT include production setting experience)
An A&P license is strongly preferred but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 47582
Job Location: Nashville, TN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Milwaukee, Wisconsin!

Contract Length: 4+ months with the opportunity of going direct.
Start Date: ASAP
Pay Rate: Extremely competitive. Contact an STS Recruiter at 1-800-359-4787 for full compensation / benefits details.
Experience Required: Three (3) or more years — Entry-level candidates will be considered but at a different pay rate than experienced candidates

Aircraft Sheet Metal Mechanic Job Duties:
Work will be performed on CRJ 200 aircraft (prior experience working on this aircraft is preferred)
Maintain, modify and install the various components of aircraft sheet metal
Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external
Perform checks; carry out inspections and removal of components
Study technical manuals, blueprints and engineering drawings
Provide assistance to aircraft technicians and mechanics on various tasks
Perform final checks on assembly and installation of parts that were replaced
Maintain and keep track of all the maintenance records
Adhere to company policies and safety programs
Qualifications:
Active FAA Aircraft & Powerplant Certifications are not required for Aircraft Sheet Metal Mechanics but they are highly preferred
Three (3) years of maintenance experience with at least 12 months on the CRJ (in lieu of CRJ maintenance experience, we will consider candidates with six (6) or more years of aircraft sheet metal experience)
Entry-level candidates will be considered but at a different pay rate than experienced candidates than experienced candidates
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48764
Job Location: Milwaukee, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technicians

Description:
STS Technical Services is hiring Aircraft Structures Technicians in Great Falls, Montana.

Duties & Responsibilities:
Provide technical assistance or guidance to the crew.
Communicate when tasks are complete so next trade can move onto the job.
Ensure work environment is safe and clean.
Promote company values, vision and mission. Demonstrated capability and competency in field of expertise.
Excellent oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Possesses strong fundamental aircraft knowledge. Builds quality capability and responsiveness.
Carry out maintenance repairs on customer aircraft.
Sign work sheets and work cards for work accomplished – completely and accurately.
Qualifications:
2+ years’ aircraft structures maintenance experience as a structures technician required.
Possess excellent oral and written communication skills required.
Demonstrated ability to work well with other individuals throughout the organization.
A&P License preferred.
CRJ structures experience preferred.
The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job.
The employee will be required to occasionally lift 50 pounds
Bend, stoop, kneel, crawl, and climb ladders.
Stand for extended periods of time
Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48060
Job Location: Great Falls, MT
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Safety Engineer

Description:
We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

Responsibilities of the Avionic System Safety Engineer

Creation and integration of SFHA/SSA/CMA Avionics Systems.
Technical coordination with aviation authorities including FAA, JCAB and EASA.
Technical scheduling and coordination with suppliers and internal departments.
Other activities related to Safety Assessments.



Requirements of the

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
8 plus years of experience in Avionics System Safety.
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians (Special Term)

Description:
STS Technical Services is hiring Avionics Technicians in San Antonio, Texas.

Qualifications:
5 years of troubleshooting experience and avionics systems knowledge on any of the following aircraft platforms, Boeing 757s, 767s, 787s, MD-11s
Must have completed avionics modification work in the last 1 year
A&P License is a plus, but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 45155
Job Location: San Antonio, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC / PLC Machines Expert (Aerospace) - China

Description:
Our Aerospace Client in China requires an CNC / PLC Machines Expert to work with them in country.

Job Role:

The ideal candidate will be responsible for production line development, system testing, debugging, maintaining and providing technical guidance.

They will  analyse the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions.
They will be responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle.

Following up the project progress in time, leading the team to solve the problems that are related to the site production line, ensuring the project is completed on time.

Be responsible for intelligent manufacturing & AI research subjects application.

Be responsible for intelligent manufacturing information management and programming.

Qualifications & Experience:

Bachelors graduates or above, with more than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development.

Familiar with R&D, production, management process in the aeronautical field.

Familiar with organizational intelligent manufacturing related to equipment software, hardware technology and organisational information management software.

Proficiently program the equipment control system of intelligent manufacturing.

Experience of Leading organization intelligent manufacturing.

Experienced in intelligent manufacturing and industrial robotics is preferred.

Familiar with information system or software development, programming 

Experience with Siemens, Heidenhain and Fanuc machine system setting up, PLC modification and optimisation and overseas working experience is preferred.
 
Job Number: BH-10-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Goleta, CA ) 9115572 and 9246002

Description:
Design Engineer ( Goleta, CA ) 9115572 and 9246002
6 + Month Contract

Pay rate: $60/hr W2

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership
 
Job Number: 9115572 and 9246002
Job Location: Goleta, CA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Senior Components Engineer

Description:
We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

Responsibilities of the EWIS Senior Components Engineer

Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
Creating and executing the EWIS group certification plan.
Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
Review the preparation of documents defining aircraft environment and approved part usage.
Approve testing required for components and EWIS harness assemblies qualification.
Review of manufacturing processes related to EWIS harness assembly construction and installation.
Procure QTP/QTRs or similarity reports from EWIS components suppliers.
Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
Determine or update the qualification requirements of all EWIS components.
Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
5-10 years of experience with EWIS and air fact certification.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:

Electrical/Controls Engineer



Our Client is searching for an Electrical/Controls Engineer who wish to advance their career in the aerospace and/or power generation field. Reporting to the Engineering Supervisor, the primary focus of this addition to the Engineering Department is to analyze, control, modify, and execute programs in CNC Machine Controllers. The Electrical/Controls Engineer will also assist and/or define electronic control requirements of CNC equipment as well as plan and provide for control of programming to prevent accidental loss (i.e. power outage) and provide protection of data. Additionally, the person in this role will perform and assist in interfacing all machine/equipment upgrades or additions. Our client offers competitive wages and a full benefit package which includes medical (both a PPO plan and a high deductible plan), dental, vision, life insurance (both company provided and optional purchase by the employee), short and long-term disability, 9 paid holidays per year, paid vacation time and the chance to contribute to the 401K plan which has a $0.50 match for every dollar you contribute up to the first 6%. On top of all that, our client offers a clean and climate controlled environment to work in.



Essential Duties and Tasks:

Analyze , control, modify and execute programs in CNC Machine Controllers.

Fanuc CNC integration, repair and maintenance.

PLC, ladder logic, servo systems, variable frequency drive, digital and analog systems.

Utilize 2D and 3D computer graphics with some proficiency.

Perform diagnostic and follow-up maintenance on electronic equipment including, but not limited to PLC, robotic, and CNC controllers.

Define electronic control requirements of CNC equipment.

Provide advice to internal personnel on any equipment and tooling designs requiring electrical/electronic interface.

Coordinate electronic CNC controller programming with information systems.

Assist and support install of all new equipment.

Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment.



Qualifications, Education and Experience:



BS or AS in Electrical Engineering or 3+ years of experience building electrical devices and controls for machines used in manufacturing.

Ability to read machine electrical schematics of machines and electronics.

2D CAD experience for electrical schematics; AutoCAD and 3D CAD experience desired.

Knowledge of Ethernet wiring, basic network configuration and networking concepts.

Experience programming manufacturing machines (CNC, ladder, object-oriented programming).

Experience troubleshooting electrical, mechanical and/or computers.

Experience working with hands/hand tools to build and repair mechanical and electrical devices for machine troubleshooting and repair.

Fanuc CNC experience a plus.

Ability to perform multiple tasks simultaneously.

Strong electronic and machine language programming skills.

Demonstrated ability to influence others positively in order to achieve positive work results.

Ability to communicate effectively at all levels with external and internal customers.

Ability to effectively work with skilled trades on various aspects of building CNC machinery.

Strong problem-solving skills with creativity and tenacity.

Occasional travel.



Always take ownership and be accountable for your actions. This job description is a tool to be followed. Other job duties my be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. Good and reliable attendance, positive attitude, and always take ownership of your job and team.



EEO Statement:



Our client provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability status, or any other classification protected by state, federal, or local laws. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of the characteristics. Discrimination of any type will not be tolerated.



Experience:




  • Electrical Engineering: 1 year (Preferred)

  • CNC machining: 1 year (Preferred)



Education:




  • Bachelor's (Preferred)



Benefits:




  • Health insurance

  • Dental insurance

  • Vision insurance

  • Retirement plan

  • Paid time off



This Company Describes Its Culture as:




  • Stable -- traditional, stable, strong processes

  • People-oriented -- supportive and fairness-focused

  • Team-oriented -- cooperative and collaborative



Schedule:




  • Monday to Friday

  • Day shift

  • 8 hour shift


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34669
Job Location: Mason, OH
Rate: 95000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-02 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Mary Beth Principe
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Vandenberg AFB, CA
Duration: 6 Months

Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Facility Systems Electrical Engineer - Member of the Engineering and Infrastructure department whose responsibilities include the design, operation and maintenance of ground (fixed and portable) electrical power systems used at all client Sites.

Assignments will include electrical engineering support of, but not limited to:
- Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
- Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
- Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
- Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
- Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
- Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
- Disposition of corrective actions and coordination with cross- functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
- Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
- Develop and coordinate technical portions of proposals, statements of work and contract specifications. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
- Must understand and comply with (EWR 127- 1) Range Safety design and operational requirements in performance of duties
- Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing

External Basic Requirements:
- Bachelor’s Degree is required (Electrical Engineering degree is preferred), will consider Mechanical or Aerospace Engineering Degree with equivalent real- world work experience.
- 2- 6 years of experience working electrical/power engineering in an Aerospace, Utilities, or similarly complex environment. A Master’s Degree in Electrical Engineering may be used to satisfy 2 years of experience.
- Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
- Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
- Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
- Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high-pressure gases.

Requires a bachelor’s degree and 2 - 6 years of experience (for external candidates only). Provides solutions to a variety of engineering/ scientific problems that require knowledge of company products and processes. Contributes to the completion of milestones associated with specific projects. Failure to achieve expected results may cause project delays and result in additional costs. Works under general supervision. Interprets procedures when performing an assignment. May modify adjustments to standard approaches. Work is reviewed for soundness of technical judgment, overall adequacy and accuracy.
 
Job Number: 19-12035
Job Location: Vandenberg AFB, CA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/30/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Into Service Specialist

Description:
We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

Responsibilities of the Entry Into Service Specialist

Coordinate and integrate all the areas responsible for the Entry into service including:
Flight operations engineering and pilots, training support, program management, material and services support and production lines.
Maintenance support and technical publications
Contracts management.
Air safety and certification teams and ground support equipment
Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
Initial Pilot Training
Initial Flight Attendant Training
Pilot Support (En Route Supervision)
Flight Operations Engineering Course (FOEC)
Flight Operations Engineering Support
Pilot Support (Ferry Flight)
RAS or SCAP Module
Inflight Performance Software
Performance SW
Reconfig. of the Flight Operations Publications Set
Dispatcher SW
Flight Dispatchers Course
Balance & Trim Chart
Maintenance Theoretical Type Training (B1 + B2)
Maintenance Practical Type Training (B1 + B2)
Technical Representative
Maintenance Specialists Support
Health Monitoring Training (Basic Module) & CMC Usage
Maintenance Program Start-up and Packaging
Reliability Training
Techpubs Subscription and training
RSPL Budgetary
MPD/MMEL
Suppliers Conference
TC Approval
Aircraft Operator Certificate Operational Approval
Direct Maintenance Cost
MRO Certification
GSE

Requirements of the Entry Into Service Specialist

Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
8 or more years experience with Entry into Service for new aircrafts.
Excellent working relationship with airline customers and suppliers.
Knowledge of the aircraft delivery process.
Working experience in customer support industry and supplier negotiation.
Team management skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
FAA Quality Inspector

Windsor Locks, CT
$43.56/hr
1 year W2 contract
Split Shift: M-W: 10AM-9:30PM
S-S: 7AM-12PM
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Customer Service organization is seeking an experienced quality professional to work on a variety of initiatives in support of quality performance initiatives. This is a unique opportunity for a compliance oriented quality professional interested in a technical and regulatory career as a representative for the Federal Aviation Administration (FAA). Upon hire, the selected candidate will work closely with experienced FAA ODAs to perform regulatory compliance inspections and technical document reviews. This experience will enable the individual to master the capabilities of independently evaluating material for correct technical content, accuracy and adherence to Company QMS. This will position the selected candidate on the career growth path to ultimately become an FAA Organization Designation Authorization (ODA). The individual is expected to develop core quality competencies for support of the quality team and quality initiatives. As part of the quality team the individual must utilize their interpersonal strengths to effectively communicate with internal and external customers to support quality escape investigations due to material shipping from the Distribution Centers. In this position there will be interaction with internal sites and external suppliers as needed to support quality objectives.

This position requires well rounded knowledge of aerospace systems; including but not limited to, hardware, LRUs, components, and test stand configurations. It requires ability to interpret and work from complicated drawings, specifications, procedures, and instructions to configure and inspect a variety of aerospace systems components, LRUs, modules, and associated materials.

Core Responsibilities
* Perform visual and dimensional inspection of major and minor components.
* Perform inspection of LRU assemblies.
* Perform quality evaluations of incoming customer returns to ensure compliance and document receiving issues.
* Support the DC Quality Clinic process to ensure compliance and process certification
* Files documents and maintain quality assurance record systems as required.
* Interface with multiple BUs to support high impact quality issues.
* Interface with DCMA as needed.
* Support CAB activities related to the DC.
* Internal and process audits.

Experience Required
* 5+ years relevant quality experience specific to Company product
* Minimum 3 years of inspection experience.
* Interpret and work from blueprints, overhaul manuals, customer specification, purchase orders, certification, written and verbal instructions
* Experience in using measuring instruments such as: calipers, micrometers, height gauge
* Experience interpreting drawing requirements
* Inspect and record all dimensions with applicable measuring tools
* Experienced in customer escape management (DIVE, RRCA, Mistake Proofing)
* Understanding of auditing requirements to industry and regulatory requirements (FAA Part 21 as well AS9100 / AS9120 preferred)
* Strong communications and interpersonal skills
* Good analytical skills to develop, monitor, and interpret key metrics and business indicators, as well as engineering print requirements
* Must have excellent organizational skills, able to work independently, and operate across organizational levels
* Computer skills- Proficiency in Word, Power Point, Excel, Access
 
Job Number: 11445
Job Location: Windsor Locks, CT
Rate: 43.56
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Construction Project Manager (Aerospace)

Description:
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.

The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

The candidate must work well with all functional groups and have good communications skills at all levels are required.

Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.

Projects range from small single tasks to larger scale construction projects including:
• Facility Upgrades,
• Facility Renovations,
• Special Projects, and
• Managing Equipment Installation.

The candidate will:
• assist in the selection and contracting process of consultants and construction teams as necessary for each project,
• provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
• gain intimate knowledge of processes and
• manage capital projects on time and within budget
 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
First Article Quality Engineer

Description:
*This is a full time, 6 month, contract position located in Lansdale, PA*



We are looking for a quality engineer involved in First Article Inspections, who will create, maintain and develop Government Standard quality procedures for our aerospace production line. The applicant will be working on processes that affect our finished composite products using methods such as inspection, testing, and evaluating accuracy and precision of products (actual vs specification analysis) coming off production the line.



The daily duties will entail completing and reviewing of applicable forms to ensure compliance to AS9100 / 9102 standards. The applicant will be utilizing quality tools to help continuous improvement. Candidate will ensure our quality systems are implemented to meet Government contract specifications.



Required:
*2+ years’ experience performing quality engineering /quality assurance for AS9100/9102 aerospace production lines.
*Experience with first article inspection, reviewing of test data, corrective action, conducting audits.

*Able to gain a security clearance upon starting: US Citizens only may apply.

*4 year degree



Pluses:
* PPV Experience

*LEAN or Six Sigma knowledge or certification
* System auditing experience to AS9100C
*Performing source inspections and developing inspection strategies for complex mechanical parts and accessories
 
Job Number: 140
Job Location: York, PA
Rate: $32.55
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer

Description:
We are currently seeking a for an experienced Flight Control Engineer to fill an opening for an aerospace company located in Renton, WA. Interested candidates should have experience with Verification and Validation as well as aircraft level requirements for flight controls systems.

Responsibilities of the Flight Control Engineer

System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test and aircraft/system qualification and certification.
Author flight test and ground test specifications for Flight Controls Systems.
Analyze test data and evaluate system operation.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Prepare test reports.
Evaluate requirements for traceability, correctness, and completeness.
Provide analysis and input as required to verify compliance with ARP4754A and DO178C.
Initiate and validate improvements to the design and documentation of the Flight Control System
Ensure all schedule and cost objectives are meet as described.


Requirements

Bachelor, Master or Doctorate of Science degree in Engineering, Computer Science, Mathematics, Physics Or Chemistry.
7 plus years of experience with flight controls in terms of both software and hardware.
Excellent communication skills both written and verbal.
Expert knowledge of ARP 4754 and DO178C.
DER, UM, DAD Certification active or previous is highly preferred.
 
Job Location: Renton, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System (ATA27) Safety Engineer

Description:
We are seeking an experienced System Safety Engineer with a Flight Control Systems background. Interested candidates should have at minimum 5 years of safety assessment experience as well as previous flight control experience.

Responsibilities of the Flight Control System (ATA27) Safety Engineer

To develop and finalize aircraft T/C design to be compliant to all applicable regulatory requirements and produce necessary documents.
Perform all System Safety Assessments on Flight Control Systems.
Create SFHA/SSA/CMA for related systems.
Work on scheduling to resolve problems and mitigate risk.

Requirements of the Flight Control System (ATA27) Safety Engineer

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of experience with safety assessment in flight controls (ATA27)
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.

Requirements of the Flight Control Systems Engineer

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.


Requirements

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.


Requirements

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer w/Secret Clearance

Description:
*We have a full time, 1 year contract position, located in Palmdale, CA*



We are hiring for a contract flight controls engineer who will be working with airborne vehicle systems in the areas of GNC, Vehicle Management Systems, Control Law Design, flight simulation, telemetry, avionics and instrumentation systems for rockets and booster rockets.



Required:

*15+ years’ experience working as a Flight Controls and Simulations Engineer working at an aerospace firm or subcontractor.

*Good skills in C/C++ and embedded software

*Strong background in GNC and Vehicle Management System (VMS) development, lifecycle, or architecture

*Knowledgeable in Control Law (CLAW) Design and Development

*MATLAB (Simulink)

*BSEE or equivalent degree

*Active Secret clearance (w/recent investigation)
 
Job Number: 362
Job Location: Palmdale, CA
Rate: $80.00
Per Diem: yes split
Duration: 1 year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support. They require a Flight Controls Systems Engineer with extensive systems safety experience. 

This is an exciting opportunity to work in East Asia, contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitably skilled and qualified candidates.

Responsibilities:

The selected candidate will take charge of FCS system assessment for a new aircraft project / program.
They will be tasked with Improving the FCS department's capability for system safety assessments.

Skills/ Qualifications / Experience Sought:

Background working for Aerospace Companies in similar roles.

Degree Qualified.
More than 5-year experience on FCS safety assessment is required.
Fluent in English language with good communication skills.

Team Player.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.
 
Job Number: BH-52-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Fuel System Engineer responsible for the design of the Fuel System and related system integration. This includes requirements definition, specification and ICD creation, Supplier coordination, test execution, drawing creation, product certification, product improvement, and field support. Ability (or interest) to conduct fuel system performance analysis using 1-D fluid flow simulation software (i.e. Flowmaster, AMESim or similar analytical tools) is highly desired, but not required.

Duties and Responsibilities:
• Communicates effectively in both verbal and written format. Candidate should be able to adjust communication content and approach based on audience
• Manages task execution to ensure on-time and on-target completion
• Searches for problem root cause and develop corrective action plans and solutions
• The primary role of this position within the team will be as a general fuel system engineer. Specifically, this will entail:
o Support fuel system production and field issues with troubleshooting.
o Implement design improvements to the current fuel system design.
o Interface with current fuel system suppliers to manage supplier changes
o Participate in testing including supplier qualification testing, and flight testing
o Able to manage the certification aspects of major and minor changes including test plans, test reports and analysis reports that will be submitted to the FAA
• An additional role for this position within the team will be as a fuel system performance analyst; is desirable to find a candidate that has proficiency or interest in performing this analysis, but not a required skill. If interested, this role will entail
o Modeling the fuel system using a 1-D fluid flow simulation software such as AMESim or Flowmaster
o Performing performance assessments of the fuel system including tank filling performance, fuel distribution and supply performance, vent system performance, unusable fuel simulations, negative acceleration simulations and other system performance simulations
o Comparing analysis results to flight test data
o Evaluating performance impact of proposed design changes
o Writing reports documenting analysis results
• Additional roles within the team may be available at different program phases

Education, Work Experience, Certification and/or Licensure:
• BS in Engineering with 5 or more years directly related experience or MS in engineering with 3 or more years of experience
• Previous aerospace experience at either Supplier or OEM
• Some Travel will be required


Knowledge, Skills and Abilities:
• Familiar with industry documentation for design, test, and certification of propulsion systems
• Proficient in Microsoft Office Products.
• Familiar with FAR Part 23 or Part 25.
• Familiar with Industry standards such including DO-160, MIL-HDBKs and SAE ARPs.




The Structures Company is an AA/EOE.
 
Job Number: 297
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Engineer

Description:
Summary
As the Human Factors Engineer you will report directly to the Flight Deck Manager and will be responsible for the technical aspects of the Human Machine Interface (HMI) design, integration and testing of the flight deck for the business jet.

On any given day you might:
• Develop the HMI design and architecture of the Flight Deck
• Integrate the Flight Deck design with the interior supplier, Flight Controls IPT and the Avionics IPT
• Develop product plans that include certification plans
• Provide subject matter expert level technical leadership, mentoring, and guidance on both practical and theoretical aspects of HMI engineering
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the Flight Deck mock-up
• Assist in the creation of the Flight Deck Simulator
• Ensure compliance with regulations and customer requirements interact directly with suppliers
• Define requirements and processes
• Validate and verify of requirements
• System test and certification
• Report Status
• Provide expert level guidance on both practical and theoretical aspects of the Flight Deck design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• Good understanding of Systems Engineering
• Good understanding of anthropometrics, pilot psychology, Pilot workload and flight deck equipment interactions
• Demonstrated success developing processes
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 60494, Mil-STD 1472 and other relevant industry standards is preferred.

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-032
Job Location: Reno, NV
Rate: $62.50-$100
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert - Aerospace - China

Description:
Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai. 

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BH-70-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intelligent Manufacturing Expert - Aerospace - China

Description:
Intelligent Manufacturing Expert - Aerospace - China

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Intelligent Manufacturing Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai. 

Job Description

·Responsible for digitalizational intelligent manufacturing application planning, AI algorighm development, system testing, debugging, maintaining, technical guidance etc.;

·Analyze the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

·Responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle;

·Follow up the project progress in time, lead the team to solve the problems that related to site production line, ensure the project is completed on time;

·Responsible for intelligent manufacturing information management and programing.

Qualifications & Experience

·More than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development;

·Familiar with R&D, production, management process in the aeronautical field;

·Familiar with organizational intelligent manufacturing related to equipmental software, hardware technology and organaitional information management software;

·Proficiently program the equipment control system of intelligent manufacturing;

·Lead organization intelligent manufacturing, experienced in intelligent manufacturing and industry robot are preferred;

·Familiar with information system or software development, programmer who are experienced in programming and software developing are preferred;

·Overseas working experience is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BH-69-2
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer

Description:
This is a full time, 15 month contract, located in Colorado Springs*
*Requires an Active Secret Clearance*



We are hiring for a Logistics Engineer who will be working on Secret projects within the aerospace field. The candidate will be expected to work with site personnel to develop and maintain effective and efficient logistic support programs.



Daily duties will entail conducting regular inventory audit/checks, manage Government furnished equipment (GFE) checks, create shipping documents (DD 1149), work with shipping databases, manage facility test equipment and maintain calibration schedules, conducting System Safety and EHS Assessments, including equipment modifications to ensure meet safety requirements (typically UL compliance), work with Safety Data Sheets for hazardous materials.



Required:
*5 years’ experience in Logistics or similar engineering at a Government or subcontractor site.
*Experience with Government GFE checks and forms such as DD 1149
*Good EHS and System Safety knowledge and experience including Safety Data sheets.
*Knowledge of ILS Processes to support maintaining the ILS Depot Operations Manual
*Active Secret Clearance; Only US Citizens please

*Engineering degree preferred
 
Job Number: 900
Job Location: Colorado Springs, CO
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Fort Worth, TX
Rate: $39.41/HR
Duration: 1 year contract
Shift: Must be able to work evenings and flexible hours

****MUST be a U.S. Citizen****

Job Description:
1. A position within the Export & Dangerous Goods Control Team supporting an aerospace production and global sustainment enterprise.
2. Primary tasks to include providing dangerous goods packaging instructions, compliance inspections and execution of required certifications for all modes of transportation.
3. Responsibilities include interfacing with multiple internal departmental contacts across our client as well as freight forwarders, personnel stationed at various air force bases, international partners, and local country nationals.
4. Must be able to interpret and apply legal regulations for Air (IATA/ICAO), land (49 CFR), and sea (IMDG) to products offered for shipment to domestic and international locations, some of which require multiple modes of transport.
5. Must be able to communicate effectively with personnel from multiple internal business areas to explain requirements and obtain additional information regarding offered products.
6. Must continuously monitor regulations and work with department leaders to maintain current requirements for dangerous goods packaging and shipping.
7. Must possess strong organizational skills and maintain all records and counts for time period required by external regulations and internal policies.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. MS Office experience required.
3. SAP experience preferred.
 
Job Number: 11208
Job Location: Fort Worth, TX
Rate: $39.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MATERIAL & PROCESS ENGINEER

Description:
Role: : MATERIAL & PROCESS ENGINEER
Location: Centennial, CO
Duration: 10 months’ contract

Job Description:
This contract labor position is for a mid-level to highly experienced Avionics Parts, Material and Processes (PMP) engineer, with responsibilities to include the following:
- Serve as team member within the Avionics PMP Group - ensuring that PMP review, testing and procurement meet project schedule and budget
- Provide Avionics PMP support to Avionics hardware including EEE piece parts, electrical circuit boards, electrical connectors, electrical box assemblies, batteries, and wire harnessing
- Coordinate with designers to ensure proper PMP selection on heritage and major development programs
- Review drawing packages for material and process selection and compatibility with electrical parts
- Evaluate and approve Part Approval Requests (PAR) using physics of failure based reliability principles, including assignment of suitability for the application, and the intended mission profile environment
- Interface with Avionics suppliers in support of Hardware Design, Manufacturing Processes Reviews, Build Instruction Reviews, and Build Anomaly Reviews
- May require up to 20% travel

Position Requirements:
• Bachelor of Science degree in Material Science, Electrical Engineering, Physics, or similar applied science or engineering fields
• Current or previous experience with Aerospace Avionics Parts, Material and Processes including electrical piece parts, wire harnesses, and top assembly boxes
• 10+ years of experience
• Demonstrated experience in the resolution of complex part, material, and process anomalies
• Working knowledge of Military and Commercial parts, materials, and process specifications
• Experience working independently and in a team environment
• Experience with Microsoft Office
• Strong communication skills (verbal and written, including presentation skills)
• Ability to travel when needed
 
Job Number: 19-06183
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Position Purpose:
• Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Aerospace interior experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Entry level position.

Principle Duties and Responsibilities:
• Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Work on special projects.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.

Other Requirements:
• Basic knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-367
Job Location: Savannah, GA
Rate: $40/hr
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Location: Savannah, GA
Rate: $40.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
1. Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Perform productibility studies from engineering drawings.
5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
6. Incorporate Lean Manufacturing Methodology into existing and future processes.
7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
8. Support all Safety, Sustainability and Ergonomic Initiatives.
9. Aid in development and maintenance of Business Continuity Plan.
10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
11. Author DRDI/DMT rework instructions to support effective corrective actions.
12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.

Additional Functions:
1. Work on special projects.
2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
3. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
4. Perform other duties as assigned.

Other Requirements:
1. Basic knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Specialist certification or higher preferred.
 
Job Number: 11351
Job Location: Savannah, GA
Rate: $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Position Purpose:
• Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Aerospace interior experience is a plus.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.

Principle Duties and Responsibilities:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Ensure quality policies are being practiced; make recommendations to improve quality.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 24-368
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
7. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
8. Keep current on state-of-the-art manufacturing developments.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. Develop business case and present to management for process improvement approval.
11. Assume the duties of the ME Group Head in his/her absence.
12. Assign and review work of subordinate personnel.
13. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
14. Lead/coordinate the implementation of projects between multiple orgs.
15. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
16. Support all Safety, Sustainability and Ergonomic Initiatives.
17. Author DRDI/DMT rework instructions to support effective corrective actions.
18. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
19. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 11370
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer – Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: Level 3 = $40.00 - $48.00/HR
Level 4 = $50.00 - $61.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

** The Hiring Manager is looking for candidates who have significant experience supporting machining and welding operations **

** Onsite interviews required **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.

Education:
Level 3: Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Level 4: Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 11085
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Process Engineer

Description:
Nesco is assisting a growing aerospace company in the Old Saybrook area with finding a Manufacturing Process Engineer. This is a great opportunity for an experience aerospace engineer to work for a close knit company with room for advancement. Salary is 65-90k DOE First and second shift available

  • Aerospace experience required

  • Experience with machining, specially CNC preferred

  • Knowledge of outside processing including heat treating and coating preferred

  • ERP experience and Lean training preferred

    • Create work instructions for processing and outside services

    • Work hands on with production team

    • Support cost reduction initiatives

    • Design tolling and work holding

    • Order raw material and transfer from India

    • Create process routers and BOMs

    • Create process models and drawings




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-30233
Job Location: chester, CT
Rate: 90000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-07-23 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jessica Hughes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
Location: Palmdale, CA
Rate: $48.86/HR
Duration: 8 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation must be completed within the last 5-years****

Job Description:
1. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Required Skills:
1. Microsoft Project and/or Open Plan Experience.
2. Milestones Professional Experience.
3. Proven Planning and Scheduling Expertise.
4. Proposal and Program Execution Experience.
5. Demonstrated Earned Value Management System (EVMS) Experience.
6. DCMA Schedule Metrics/Data Driven Metrics Knowledge.
7. Schedule Risk Analysis SRA experience.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11150
Job Location: Palmdale, CA
Rate: $48.86/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner - Clearance URGENT URGENT CA

Description:
165385
Job Title: Master Planner

Work Site Address: Palmdale, CA 93599
Job Number: 1728-1

Start Date: 7/23/2019
End Date: 3/27/2020
Position Type: Contract

Job Summary:
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.


Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Highly Desired Skills: Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Proposal and Program Execution Experience. Demonstrated Earned Value Management System (EVMS) Experience, DCMA Schedule Metrics/Data Driven Metrics Knowledge and Schedule Risk Analysis SRA experience.

Qty 9 positions needed

Work location Palmdale California.
 
Job Number: JE-1728-1S6
Job Location: Palmdale, CA
Rate: DOE
Per Diem: yes
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner / Microsoft Project and/or Open Plan Experience - Clearance URGENT URGENT CA

Description:
165417
Job Title: Master Planner

Work Site Address: Palmdale, CA 93599
Job Number: 1761-1
Start Date: 7/17/2019
End Date: 3/21/2020
Position Type: Contract

Job Summary:
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Highly Desired Skills:
Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Proposal and Program Execution Experience. Demonstrated Earned Value Management System (EVMS) Experience, DCMA Schedule Metrics/Data Driven Metrics Knowledge and Schedule Risk Analysis SRA experience.

Qty 2 positions needed
 
Job Number: JE-1761-1TS6
Job Location: Palmdale, CA
Rate: DOE
Per Diem: yes
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials Testing & Process Quality Laboratory Specialist

Description:
The ideal candidate will support, perform and manage testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations as well as lean initiatives within manufacturing operations.

Some local travel will be required to conduct monthly testing at facilities located in Bridgeport CT and Shelton CT. Typically travel is limited to once or twice per month for each offsite location.

The Specialist will be working in the Materials & Process Quality Laboratory. The role will include preparation of metallic and composite samples using basic machining equipment to perform ASTM type testing on raw materials as well as production part samples. Typical analyses performed include testing of chemical processing lines, metallographic testing, composite material testing, metallurgical testing, raw material specimen preparation, fluid testing, and oven and autoclave system accuracy testing.

Basic Qualifications:
• High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical tasks.
• Experience working in a laboratory/manufacturing environment.
• Strong work ethic.
• Comfortable working with computers and the Microsoft suite.
• Strong reading comprehension skills including capability to interpret engineering specifications and test procedures
• Strong communication skills needed to support team-based work environment.
• Strong organizational skills with the ability to manage in a fast-paced environment with competing priorities
• Ability to follow written work instructions required.
• Off-shift work and overtime may be required to support business needs.

Desired skills:
• Knowledge of Basic Chemistry
• Familiarity with oven surveys
• Experience working in a laboratory environment
• Experience performing tests in accordance with ASTM and/or AMS standards
• Experience working in the Aerospace industry or at a NADCAP accredited organization
• Mechanical aptitude
• Familiarity working with basic hand tools
• Experience making composite layups
 
Job Number: 123123123
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional:
The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is an individual contributor level position. 8-15 years’ experience desired. The candidate must be a US person. Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required. Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired. Knowledge of drawings, geometric tolerancing, and drawing interpretation. Experience with manufacturing techniques for limited production hardware. Ability to work within a matrix organization to achieve team and program goals. The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 11368
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Drive Systems)

Description:
Please send resumes to Becky Norman at bnorman@butler.com.

Summary:

The Drive System Design Engineer is responsible for design activities related to preparation and release of engineering data for complex mechanical components including gears, bearings, shafts, housings and other supporting components as well as subsystem integration.  This role supports the manufacturing, assembly and validation of these mechanical components and ensures compliance with all best practices, customer and industry specifications in support of air vehicle performance and safety requirements. 


Position Responsibilities:

Create detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and various analytical tools.
Support manufacturing and testing of drive system components and sub-systems interpreting technical data and assisting in product improvements.
Improve detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and PLM software.
Participate in a cross functional team environment completing a variety of objectives depending on the program lifecycle assigned.
Advance the state-of-the-art drive system through creative thought, personal and team research, technical compliance and strong analysis skills.

Qualifications:

Mechanical design experience with 2D/3D modeling, requirement capture and specification development is required.
Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc. is required.
Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
Proficiency with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE.
Proficiency with Mathcad, Matlab, FEM software (ANSYS, etc.), AB Jones, KIMOS, AGMA related analysis tools, etc.
Proficiency with basic office computer software, specifically the Microsoft office suite (Word, Excel, Powerpoint, Outlook, etc.) is required.
Must have working knowledgeable of GD&T requirements.
Strong analytical ability is required.
Must have demonstrated success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds.
Must have demonstrated ability to organize and prioritize a variety of activities and tasks while dealing with change.
Previous experience working with PLM software such as ENOVIA to drive product lifecycle is preferred.
Previous experience working on cross functional engineering programs is preferred.
Education Requirements: 

Bachelor’s Degree in Mechanical or Aerospace engineering is required.
Other equivalent engineering disciplines will be considered with sufficient applicable experience.
Master’s Degree in the Engineering as described above is preferred.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any
 
Job Number: 57715
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: Sept 2019
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - NASTRAN/FEMAP

Description:
Role: : Mechanical Engineer - NASTRAN/FEMAP
Location: Centennial, CO
Duration: 6 months’ contract

Job Description:
Conduct structural analysis and contribute to the design and testing of propulsion fluid systems/components involving metals, non-metallic or composite structural materials in cryo and non-cryo environments. Propulsion systems include structures, hydraulic components, pneumatic components, fluid transfer components, ducting designs. Analyzes damage tolerance, durability, design allowables, dynamic and structural modeling. Perform structural testing as required. Tools utilized may include NASTRAN, FEMAP, NX CAE, PATRAN and a variety of software applications.

Basic Requirements:
• Bachelor’s Degree in Mechanical or Aerospace Engineering from an accredited university
• 5+ years of relevant job experience
• Time management skills and strong self-initiative
• Ability to operate independently, and work as part of a team
• Ability to present technical concepts and solutions
• Ability to apply design concepts to real world solutions
• Ability to assess and interpret engineering drawings, specs, and industry/government standards
• Ability to create and modify Finite Element Models and perform classical hand analysis
• Travel may be required to other *** locations and suppliers
Preferred Qualifications
• Experience with propulsion related systems and components
• Internship or experience in an aerospace or aviation field
• Experience with Aerospace engineering applications
• Hardware manufacturing and testing experience
• Knowledge of machine shop practices, capabilities, accuracies and limitations
• Proficient with Microsoft Office platform tools
• Demonstrated proficiency in team leadership
• Excellent communication skills (oral and written)
 
Job Number: 19-05535
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmers - Many Needed **HOT**

Description:
*UGNX or Catia V5
*Recent composite experience
*Fibersim & TruNet a plus
*3, 4, and 5 axis experience

*Aerospace manufacturing experience preferred.


mail resume to: mmccarthy@pdstech.com
 
Job Number: GKN-MO - NC
Job Location: St. Louis, MO
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Programmer 3

Description:
Numerical Control Programmer 3

Location: Portland, OR
Duration: 6 months

Job Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

Education / Experience:
Required to have experience in Aerospace Metal Machining programming and be able to use Vericut simulation software.

Skill Code: 67K-Machining/Tooling
 
Job Number: 19-12407
Job Location: Portland, ORE
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/27/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Performance Engineer

Description:
We are seeking an experienced Aerospace Engineer with a Flight Dynamic background to fill an opening for a company in Nagoya, Japan. Interested candidates should have 10 plus years of technical aircraft experience as well as experience with aircraft certification.

Responsibilities of the Performance Engineer

Provide technical assistance to the development and certification of the aircraft program, focusing primarily on the design and development including performance software and verification of aircraft performance characteristics.
Initiating and reviewing related documents, technical calculations, interface with team members and all the other stakeholders including systems, structures, manufacturing, customer support and other partners.
Assisting other aircraft performance duties such as analysis of specific phases of flight as well as overall mission, support of flight test activities (data analysis, modeling, report), development of technical manuals (AFM, FCOM, MEL and CDL) and CAFM, analysis of failure scenarios.
Education and mentoring of team members regarding professional knowledge of performance on an on-going basis.
Provide expertise to assist in resolving performance issues identified during any desktop analysis, rig testing or Flight testing.

Requirements of the Performance Engineer

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Minimum 10 years of broad engineering experience in aircraft technical disciplines.
Must have excellent written and verbal communication skills in English.
Aircraft certification experience.
 
Job Location: Japan
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Structural / F-35 Nastran Patran analysis MRB JSF Fuselage metallic composite structures FEA CA

Description:
166101/1786
Principal Engineer Structural (Job Number: 19019757)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Sep 9, 2019

Target End Date: Sep 4, 2020

Pay Rate: $53 to $58

Work Schedule: 4/10

Duration of Assignment: Up to 1 year


Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Northrop Grumman's Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods including large NASTRAN models of metallic and advanced composite structures. Desired skills include MRB stress analysis, detailed hand analysis, FEM analysis (PATRAN/NASTRAN preferred), layout sizing, durability and damage tolerance (DaDT) of aircraft structures, acoustic/dynamic evaluations. Responsible for liaison support in an MRB environment which includes analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite materials (launch vehicle experience considered).


Basic Qualifications:

• Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5+ years of engineering experience OR Master’s Degree in STEM and 3 years of engineering experience.
•Analytical experience with metallic and composite structures.
•Finite element analysis.

Preferred Qualifications:

•MRB experience in the aerospace industry.
•Analysis of composite structures.
•DaDT analysis.
 
Job Number: JK-1786ATO
Job Location: Palmdale, CA
Rate: 53-58/hr max
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Industrial Engineer LA

Description:
165489
Principal Industrial Engineer (Job Number: 19019150)

Number of Openings: 1

Location(s): United States-Louisiana-Lake Charles


Shift: 1st Shift

Target Start Date: Aug 5, 2019

Target End Date: Oct 7, 2019

Pay Rate: $48 to $50/hr

Work Schedule: 9/80

Duration of Assignment: 2 Months

Aerospace Systems has an opening for an Industrial Engineer to join our team of qualified, diverse individuals. This position will be located in Lake Charles, Louisiana.

The selected candidate will be responsible for:

- Analyzing and designing sequencing of operations and work flow to improve efficiencies at suppliers;
- Establishing methods for maximum utilization of production processes and personnel.
- Participate in assessment of suppliers and all phases of production operations.
- Conducts studies pertaining to supplier production control, work flow, cost control, cost reduction, inventory control, and production record systems.
- Based on the results of the above mentioned studies the successful candidate will recommend develop and implement plans and programs, modifications and revisions to operating methods.


Basic Qualifications:

B.S. degree in a STEM (science, technology, engineering, mathematics) plus at least 5 years of experience or a Master Degree plus 3 years of experience.
Demonstrate experience with the Microsoft Office Suite; and Microsoft Project.
Able to work in both external and internal environmental conditions.

Preferred Qualifications:

Manufacturing experience with offsite suppliers.
Demonstrate ability to analyze supplier manufacturing capability and characteristics
 
Job Number: JK-1785
Job Location: Lake Charles, LA
Rate: 50/hr max
Duration: 2 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Simulation Engineer / Tool Designer

Description:
Location: Chula Vista, CA
Rate: $48.50/HR (willing to go higher for the right candidate)
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split / Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****

Basic Qualifications:
1. Bachelor’s degree (BSIE, BSME, BSAE) from an accredited college, or equivalent experience/combined education
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication.
5. Experience with CATIA/DELMIA Simulation
6. Experience working with or supporting manufacturing / production environment.
7. Five plus years’ experience in producing Off Line Programming (OLP’s) using Delmia in manufacturing environment, preferably in an aerospace, but not required.
8. Automotive OLP experience is acceptable
9. Experience demonstrating mechanical aptitude for problem solving abilities and resourcefulness.
10. Must be proficient in Delmia

Required Competencies:
1. Ability to read and thoroughly understand technical Model Based Definition 3D Models/drawings
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Ability to identify and find specifications
4. Comprehensive Knowledge of Delmia & Catia V5 systems.
5. Attention to detail.
6. Ability to multitask in a fast paced environment.
7. Ability to work independently and as part of a team.
8. Ability to think independently and problem solve.
9. Good planning skills
10. Proven ability to work independently with limited direction and highly motivated
11. Proficient in Microsoft Office computer skills

Desired Skills:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Manufacturing simulation or virtual manufacturing tools – DELMIA
3. CAD applications - CATIA v5/v6
4. Discrete event simulation methods – Production Systems Simulation, DELMIA
5. Manufacturing Execution Systems
6. Digital work instruction tools
7. Augmented Reality (AR)
8. Automation/Robotics
9. Self-motivated change agent, has a bias for action and a sense of urgency, demonstrates accountability by holding self and others accountable to the team charter.
10. A demonstrated capability to think strategically and execute tactically.
11. Demonstrated communication skills, both written and verbal.
 
Job Number: 11115
Job Location: Chula Vista, CA
Rate: $48.50/HR +
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer

Description:
Location: Colorado Springs, CO
Rate: $33.38/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****

Job Description:
1. Responsible for mid to high complexity projects with high complexity related to general engineering and technical process improvements.
2. The Product Engineer provides manufacturing and field service engineering support for military ejection seating products within the military aerospace industry.
3. Responsible for engineering support for both internal and external customers through problem solving, product improvements, cost reduction, small scale design, customer/authority compliance and engineering documentation maintenance.

Education:
1. Bachelor's Degree
2. Two (2+) years of experience.
 
Job Number: 11271
Job Location: Colorado Springs, CO
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer (Military Ejection Seating)

Description:
The Product Engineer will provide manufacturing and field service engineering support for Military Ejection Seating products within the military aerospace industry.

The ideal candidate will be responsible for:
• engineering support for both internal and external customers through problem solving,
• product improvements,
• cost reduction,
• small scale design,
• customer/authority compliance and
• engineering documentation maintenance.
 
Job Number: 1910104887
Job Location: Colorado Springs, CO
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
We have an Excellent position for a Program Manager to join a leading American Technology Company located in Philadelphia, PA.

Major Responsibilities:
Overall management responsibility consistent with Company objectives for research, design, and development of new or modified products.
Experience with Power and Propulsion Systems
Perform management oversight of major manufacturing contract or projects.
Ensure technical, schedule, and cost performance objectives are met.
Effectively direct – from concept through manufacturing, test and delivery – the design and development of new products.
Effectively interact with the customer to ensure that a healthy relationship is maintained and to assure that no requirements, other than those included in the contract, are imposed on the programs.
The Manager should be familiar with all aspects of program execution, including contractual, financial and technical matters to assure the company’s success for the program.
Basic Hiring Criteria:
A minimum of a Bachelor’s Degree in a technical discipline is required for this position.
A minimum of verifiable five years’ experience in organizing, leading, and managing an integrated project team of engineers, quality assurance professionals, suppliers, manufacturing associates and test engineers in the design, development, and delivery of Aerospace and Defense equipment is required for this position.
A minimum of five verifiable years’ experience managing material and supplier budgets and schedules is required for this position.
A minimum of five verifiable years’ experience with the Government-contracting process is required for this position.
Position requires U.S. Citizenship.
Desired Qualifications:
A MBA is preferred.
Should have Microsoft Project experience.
Ability to establish and maintain business and technical contacts outside of the Company.
 
Job Number: 37765
Job Location: Philadelphia, PA
Rate: $45.00 to $50.00
Duration: 6 Month +
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Environmental / Thermal Control Hardware)

Description:
This Project Engineer must have experience in Development Hardware and Production Hardware Design as an Integrated Product Development team lead and Cost Account Manager (EVMS experience).

They must have proven ability to both delegate with appropriate direction and perform project planning and management tasks.

The candidate shall have: •Experience leading projects with a lean mentality and simultaneously meeting technical excellent, budget and schedule.
•Excellent communication skills (written and verbal) and
•Excellent team management skills
•Ability to manage and meet internal and external customer expectations.
•Experience in the design lifecycle of Environmental Control Hardware or Thermal Control Hardware for Space, Military or Aerospace applications
•2-4 years of related experience

A Bachelor's degree is required.

Potential travel - maybe once a month
 
Job Number: 1910106191
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager - Aerospace

Description:
We are seeking an aerospace project management expert to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of aerospace related experience including certification knowledge as well as exceptional leadership and project management skills.

Responsibilities of the Project Manager

Perform all Project Management duties required to finalize aircraft development and Type Certification and Entry into Service.
Provide evaluation of current aircraft design status until Type Certification is granted by the main certification agencies.
Preparation and maintenance of a General Schedule for all activities in the group in consistency with the Master Schedule.
Preparation of lower level schedules and support for sub-group leads in assignment of resources.
Continuous understanding of progress of supplier’s activities to ensure consistency with program schedules.
Keep management and relevant members of the team informed on progress of significant activities.
Planning and coordinating integration of design change activities.
Understand all assigned systems contract requirements in support of suppliers.
Provide expertise scheduled activities related to solving planning issues and concerns raised during any testing, Flight testing or otherwise.
Manage and monitor overall project budget with support from financial controller.
Identify, manage and follow up project risk, issues and opportunities.
Establish and maintain proper communication with assigned IPT team, provide guidance to IPT team meet project commitments and deliverables in order to secure program schedule.

Requirements of the Project Manager

Minimum 10-years of experience in aerospace required.
Strong skills and experience coordinating with other division and leading projects.
Aircraft systems and/or project management experience.
Excellent overall knowledge about aircraft manufacturing and certification program.
Prior experience creating governance structure and KPI.
Have high level communication skills, energetic and driven to complete projects.
Proficiency with MS Project and MS Excel.
PMP certification and cost/budget management is preferred.
Candidates must be fluent in both written and spoken English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Position Purpose:
• Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Education and Experience Requirements:
• Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job.
• Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation. Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
• Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
 
Job Number: 24-347
Job Location: Tulsa, OK
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Must Be Eligible for a Clearance

The position will be heavily involved in the First Article Inspection process. Looking for a self-starter that has the background knowledge in the process to support the efforts. The individual will be responsible for the completion and review of applicable forms to ensure compliance to AS9100 / 9102 . May be certified in lean and six-sigma quality methodologies and utilize quality tools to help drive continuous improvement.

Bachelor’s degree in Engineering, Computer Science, Computer Engineering or related technology.

PPV/FAI Experience

Experience in aerospace quality management systems - AS9100D and AS9102
 
Job Number: 47332
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer (Aerospace)

Description:
The ideal candidate will manage low to mid complexity projects determining Quality Improvement parameters by identifying statistical methods relevant to manufacturing processes. They will provide statistical information for establishing quality standards by identifying testing methods and samples.

Major job responsibilities include: •Understanding key aspects of managing a large supply base to achieve best-in-class quality, delivery and customer service
•Building and maintaining key relationships with Suppliers, Quality and Operational teams
•Collecting and compiling data while driving key continuous improvement initiatives at the internal supplier sites
•Leading the Escape Management process to achieve containment and ensure RCCA is implemented
•Supporting cost and lead time reduction on the Landing Gear manufacturing line
•Collaborating with Engineering and Procurement teams to develop and implement supply base improvement plans

Basic Qualifications:
•Bachelor's Degree (preferred - not required)
•2+ years of experience in Quality, Manufacturing, and/or Engineering
•US citizenship required due to government contracts

Preferred Qualifications:
•ACE/Six Sigma / UPPAP experience a plus
•Read and understand blueprints, industry and customer specifications
•Experience working within the SAP operating system
•Understanding of ASQR-01 / AS9100 / ISO 9000
•Ability to meet commitments, balance and resolve conflicting priorities
•High energy, dynamic individual who strives for continuous improvement
•Highly motivated and a self-starter with a strong desire to succeed and pursue continued growth and developmental opportunities
•Demonstrated ability to interface with all levels of management and external customers
•Results focused work ethic to resolve issues in a timely manner
 
Job Number: 1910106190
Job Location: Fort Worth, TX
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer I

Description:
Quality Engineer I

Fort Worth, TX
$25.75/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Determines quality improvement parameters by identifying statistical methods relevant to manufacturing processes. Provides statistical information for establishing quality standards by identifying testing methods and samples.

⦁ High School Diploma or equivalent
1 Must read, write, speak, and understand English
2 Minimum 18 Months experience in Aerospace
3 Proficient in blueprint reading and interpretation of technical data and quality procedures.
4 Ability to work independently with minimal supervision.
5 Strong computer skills in word processing, spreadsheets, and databases.
6 SAP a plus *

Additional Comments

⦁ Accuracy and attention to detail is highly important

1 Ability to communicate effectively and tactfully with a wide variety of internal and external customers and support groups.

2 Excellent organizational skills with the ability to work under stress.

⦁ Ability and flexibility to work overtime and weekends as needed.
⦁ Receiving Inspection and/or Production Inspection, Audits
1 Perform product inspection tasks per inspection procedures
2 Document inspection activities on appropriate inspection records
3 Maintain inspection records in an organized manner
4 Make decisions regarding product acceptance per product documentation and company workmanship criteria
5 Document product discrepancies per company procedures
6 Disposition product non-conformances as approved
7 Assist QA Engineering in corrective action follow-up
8 Prioritize product inspection per schedule needs
9 Understand & interpret design data (prints, BOM's, etc.)
10 Understand geometric dimensioning and tolerancing
11 Use proper inspection methods & equipment (inspection hand tools, surface plate, etc.)
12 Assist QA Engineering in development of inspection methods and procedures
13 Capable of supporting multiple product lines and/or commodities
14 Answer quality & inspection questions
15 Perform product & quality system audits as required
16 Maintain applicable skills, knowledge, & certifications as required
17 Miscellaneous duties as required
18 Ability to prioritize numerous tasks to meet schedule needs.
 
Job Number: 11434
Job Location: Fort Worth, TX
Rate: 25.75
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
Quality Inspector

Fairfield, CA
$46.44/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
•Perform detailed product inspections on incoming materials from suppliers, including but not limited to First Article Inspections and certified supplier document reviews.
•Document characteristics of aerospace products accurately and with technical detail.
•Initiate Quality Notifications for any products that do not conform to written work instructions.
•Perform accurate and detailed dimensional inspections without supervision.
•Establish professionalism and timeliness in the performance of daily activities.
•Apply quality assurance procedures and requirements to the inspection of aerospace hardware and document review.
•Identify any potential quality issues early and prevent their occurrence.
•Communicate effectively to other aerospace personnel any quality issues needing resolutions.
•Indicate status of aerospace products within the MRP system.
•Work multiple assignments concurrently and maintaining flexibility to production schedule.

Additional:
•Basic math skills including addition, subtraction, multiplication, division, fractions and percentages
•Experience performing detailed product inspections using blueprints/specifications and precision measuring and test equipment
•The ability to work safely within an energetic materials manufacturing facility
•Excellent communication skills to drive effective problem resolution and communicate quality status and concerns to other Aerospace personnel
•The ability to utilize computer systems including input of data and retrieval of information for inspections and configuration purposes
•The ability to promote team spirit within the company and to provide a leadership role in the area of cooperation with all internal and external customers
•The ability to concentrate on assigned tasks despite interruptions
•The ability to review documents and to identify and resolve any errors or missing information
•The ability to work without supervision
 
Job Number: 11291
Job Location: Fairfield, CA
Rate: 46.44
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Technician (Aerospace)

Description:
The ideal candidate will determine Quality Improvement parameters by identifying statistical methods relevant to manufacturing processes. They will provide statistical information for establishing quality standards by identifying testing methods and samples.

Requirements •High School Diploma or equivalent
•Minimum 18 Months experience in Aerospace
•Proficient in Blueprint reading and interpretation of technical data and quality procedures.
•Receiving Inspection and/or Production Inspection, Audits
•Perform product inspection tasks per inspection procedures
•Document inspection activities on appropriate inspection records
•Maintain inspection records in an organized manner
•Make decisions regarding product acceptance per product documentation and company workmanship criteria
•Document product discrepancies per company procedures
•Disposition product non-conformances as approved
•Assist QA Engineering in corrective action follow-up
•Prioritize product inspection per schedule needs
•Understand & interpret design data (prints, BOM's, etc.)
•Understand geometric dimensioning and tolerancing
•Use proper inspection methods & equipment (inspection hand tools, surface plate, etc.)
•Assist QA Engineering in development of inspection methods and procedures
•Capable of supporting multiple product lines and/or commodities
•Answer quality & inspection questions
•Perform product & quality system audits as required
•Other Miscellaneous duties as required
•Ability to prioritize numerous tasks to meet schedule needs.
•Must read, write, speak, and understand English
•Ability to work independently with minimal supervision.
•Strong computer skills in word processing, spreadsheets, and databases.
•SAP a plus
•Accuracy and attention to detail is highly important
•Ability to communicate effectively and tactfully with a wide variety of internal and external customers and support groups.
•Excellent organizational skills with the ability to work under stress.
•Ability and flexibility to work overtime and weekends as needed.
•Maintain applicable skills, knowledge, & certifications as required
 
Job Number: 1910106189
Job Location: Fort Worth, TX
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
We are looking for a great Inspector for an Aerospace Company in Los Angeles County.

• Perform First Article Inspections
• High school diploma or GED required
• Knowledge of AS9100 and other relevant aerospace industry standards.
• 2+ years of experience in a manufacturing environment, preferably aerospace, or equivalent education and experience. Previous inspection experience a definite plus.
• Ability to work with Microsoft tools, CATIA, 2D and 3D drawings or computer generated models or other similar types of engineering data.
• Basic math and technical writing skills.
Proven hands-on inspection experience in the aerospace industry using a variety of precision measurement tools.
• GD&T comprehension through experience and/or formal training.
• In depth understanding of the inspection techniques and quality issues associated with composites.
• Attention to detail and follow through.
• Ability to communicate effectively with all levels of company personnel.
• Specific vision abilities (corrected or uncorrected) required for this job include color perception, close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to lift 50 pounds (unassisted).

The Spaceship Company, LLC AA/EOE
 
Job Location: Los Angeles
Rate: $17-$20
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer (FRACAS)

Description:
*This is a full time, 9 month contract to hire position, located in York, PA*



We are seeking a contract Reliability and Maintainability (RAM) engineer who will be performing high level math and risk analysis of aerospace models/systems designs that ensure maximum availability and sustainment. Candidate will be using functional Failure Modes Effects and Criticality Analysis (FMECA) and FRACAS to reduce or eliminate risk, using failures modes to assess improvements and update analysis by evaluating test results.



Daily use of block diagrams, Test Incident Reports (TIRs) input into the Failure Reporting Analysis and Corrective Action System (FRACAS) database, working with staff to unearth potential failure modes and mitigate, while tracking modifications to assist in assessing program success. Will use Reliability Enhancement Testing (RET) and reliability demonstration testing.



Required:
*10 years’ experience in Reliability, typically RAM or RM&T, analyzing data sets and identify high drivers.
*Experience performing allocations/predictions, FMECA and FRACAS.
*Familiar with reliability software tools (preferably WQS)
*Understanding of mechanical, electrical, electronic and hydraulic engineering.
*4 year degree in Engineering, Math or other Science



Pluses:
*Knowledge of WQS software
*Familiar with Specialty RAM-T disciplines.
*ASQ CRE Certification
 
Job Number: 501
Job Location: York, PA
Rate: 59.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Requirements Management Engineers - Aircraft - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require Requirements Management Engineers.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

  • Responsible for Requirement Management Planning and tools.
  • As expert to support the requirement improvement, validation and verification work.
  • Participate in team decision-making and provide support and collaboration for the team.
Skills/ Qualifications / Experience Sought:
 
  • Bachelor or above degree.
  • Rich experience in Requirement Management of civil aircraft or onboard products (at least 15 years experience in relevant fields). 
  • Proficient in requirement management and processes of civil aircraft.
  • Capable of leading the team to develop requirements on the requirement management platform and tools according to project requirements.
  • Familiar with the information architecture of interface files of large civil aircraft.
  • Familiar with the methods and techniques of aircraft interface definition and validation.
  • Proficient in IBM Rational Doors and its development language DXL, with relevant tool development experience.
  • Fluent English with good communication skills.

 
Job Number: BH-62
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STAFF LOGISTICS ENGINEER CA

Description:
165926 STAFF LOGISTICS ENGINEER

Work Site Address: 9401 Corbin Ave Northridge CA 91324 United States
Job Number: 9401488
Max Pay Rate: DOE
Start Date: 8/26/2019
End Date: 02/25/2020
Position Type: Contract


Job Description:
*Key responsibilities include:
Perform logistics engineering development and sustaining tasks for a missile system and produce related work artifacts for delivery to internal and external customers. Manage the technical support of the system to sustain its useful life. Skillfully decompose requirements from contract documentation and plan the necessary activities within a matrix organization to meet them.

Participate in bids and proposals for, and plan, facilitate and measure the effectiveness of efforts addressing the following:
- HW and SW used to support the system in both field and maintenance environments.
- Test and evaluation.
- Technical data and data management.
- Personnel and training.
- Configuration management.
- Obsolescence management.//



Qualifications and Education Requirements
**Experience and Skill Requirements:
- B.S. engineering degree.
- Minimum 10 years of related experience logistics, operations, engineering project management, RMS.
- Experience in aerospace and defense industry programs covering both development and sustaining lifecycle phases.
- Experience with Microsoft Project, DOORS, and EVMS preferred.//
 
Job Number: JK-9401488ATO
Job Location: Northridge, CA
Rate: DOE
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secondary Flight Control Systemd Compliance Engineer

Description:
We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
Conduct tests, witness tests and creating test reports.
Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
Support alignment of company proposals to globally accepted standards for certification and compliance.
Conduct coordination with related parties such as JCAB, FAA and EASA.
Manage the scheduling of all certification activities.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Hydraulics Systems Modelling Engineer - China

Description:
Our Aerospace Client based in China is looking for additional engineering Support. They require a Senior Performance & Dynamics Engineer. This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

The Senior Performance & Dynamics Engineer will be involved in conducting performance and dynamic analysis for  mechanical, hydraulic and occasionally basic electrical systems as they relate to aircraft, hydraulic, landing gear, extension/retraction, brake and steering. This engineer is also required to support requirements definition, and validation, verification test activities and  assist with the development of methods and tools. Possessing in-depth knowledge of mechanical and hydraulic systems, this engineer will generate strategies as they relate to performance and dynamics activities on given programme(s).


Key aspects of this job include the following:

 

  • Build computational models and run simulations.
  • Calculate static and dynamic loads.
  • Conduction performance and frequency response analysis.
  • Conduct stability, shimmy, model analysis and failure case analysis.
  • Correlate and validate computational models.
  • Write and validate performance and dynamic requirements.
  • Define and document simulation cases and pass/fail criteria.
  • Optimise design solution in conjunction with other engineering disciplines.
  • Define test requirements and analyse and interpret test results.
  • Adherence to the programme schedules.

Skills/ Qualifications / Experience Sought:

 

  • Knowledge of landing gear systems / hydraulic systems.
  • Experience of dynamic analysis and computational modelling and simulation.
  • Experience of model correlation and validation.
  • Knowledge of airworthiness requirements and certification.
  • Basic knowledge of systems and electrical engineering.
  • Working knowledge of MATLAB/Simulink, ADAMS and AMESim.
  • Sufficient experience to write requirements.
  • Minimum 20 yrs of related working experience in related landing gear or hydraulics.
  • Had working experience with major airframers or major suppliers.
  • Fluent English, with good communication skills.

 
Job Number: BH-59-3
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 08/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Engineer

Description:
Job Description
Major purpose: Performs a variety of quality-related functions in support of regulatory, customer, and company requirements/objectives. Coordinates/develops/monitors/maintains necessary procedures, controls, and/or programs to assure compliance/conformance to regulatory, customer, and company requirements.
Major functions: ESSENTIAL DUTIES AND RESPONSIBILITIES
• Perform product quality audits to assure compliance with customer, drawing, internal, and regulatory requirements
• Perform system audits in support of the Quality/Environmental Management System
• Coordinate close out of audit findings through, creating audits finding reports and determining proper corrective and preventive actions with the lead of the area being audited
• Coordinate needed actions to support continued ISO/AS9100 certification, preferred supplier status, and AS 9001 certifications (required for Government Quality Engineers)
• Provides liaison activities with customers and suppliers on all quality-related activities
• Review, identify, implement and maintain Customer Quality flow down requirements
• Perform review of bid and proposal quality clauses and provide compliance matrix
• Perform review of customer quality clauses, quality documents and provide compliance matrix
• Support Operations to ensure that products and processes comply with the relevant requirements of the quality management system
• Review trend analyses related to field returns, manufacturing rejects, supplier history, etc and provide recommendations for improvement
• Perform design review activities including inspectability, consistency, adequacy, accuracy, and conformance to customer requirements and provide recommendations for improvement
• Interfaces with all departments at all levels
• Analyze product and process failures to ensure effective root cause analysis and implementation of corrective and preventive actions for internal and external customers
• MRB/ECN Board representation and duties
• Responsible for participating in continual improvement activities to enhance the quality system, such as 5S, Kaizen lean methods, etc
• Employs mistake-proofing techniques
• Interface with Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data
• Identify, implement and maintain Customer Quality flow down requirements
• Perform FAA Designee authorized functions
• Responsible for performing job duties in a manner consistent with established L-3 Ethics Standards
• Responsible for working in a manner consistent with established safety rules and regulations
• Performs job duties in accordance with approved procedures established in support of Sarbanes-Oxley regulations
Technical/Functional skills:
Education/Experience/Licenses etc.: MINIMUM REQUIREMENTS
• Bachelor’s degree in Mechanical or Electrical Engineering. Masters' preferred.
• 5 or more years’ experience as a Quality Engineer in Aerospace parts manufacturing as well as planning experience in an electronics manufacturing environment with some experience related to custom products.
• Knowledgeable of concepts, practices, policies/procedures, internal engineering, manufacturing and project management functions.
• Requires excellent oral and written communication skills, strong interpersonal skills. Ability to develop relationships with all levels of personnel.
• Familiarity with AS9100, D0-178, D0-254 and aviation regulations (required for Government Quality Engineers)
• Working knowledge of quality concepts and tools (i.e., six-sigma, TQM, QFD, SPC, SQC, DOE, ANOVA, etc.)
• Proficient with quality systems software and business desktop software programs
• Experience in quality analysis techniques (statistical analysis, problem solving, process mapping, SPC, Root Cause and CAPA process)
• Interact effectively with management, peers, and other employees relative to quality and technical issues.
• The individual must have demonstrated ability to work independently with minimum oversight and be proficient in MS Word, Excel, and PowerPoint, as well as with Minitab.
 
Job Location: Alpharetta, GA
Rate: 43-47/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Jamestown ND
Rate: $68.00/hr
Duration: 6 months
Work Shift: First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Primary Responsibilities
o Develops, coordinates and conducts complex tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Liaises closely with other project team members in the planning, design, development, and utilization of electronic data processing systems for product and commercials software to ensure smooth operations on software engineering activities.
o Recommends changes in the selection and application of software production components to improve and develop software engineering activities.
o Designs and implements build procedures that are used to support hardware and software product development and function.
o Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
o Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
o Ensures hardware and software standards are met.
o Designs and implements build procedures that are used to support hardware and software product development and use.
o May develop software configuration standards for company-wide use.
o May train software developers in the use of configuration management tools and the implementation of software quality standards

Basic Qualifications
o Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline and 7 years of prior relevant experience or an Advanced degree and 5 years of prior or relevant experience
o Embedded systems software development experience utilizing C or C++ (4+ years)
o Motivated self-starter with strong analytical skills
o Experience with real-time embedded applications
o Experience in developing products for civil or military applications meeting industry or government security or safety standards
o Strong written and verbal communications skills and the ability to work well with others in a professional team environment
o Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules Preferred Qualifications
o TCP/IP network applications development experience (4+ years)
o UML experience (2+ years)
o Familiarity with ARINC 664 protocol (2+years)
o Experience following a well-defined software development process, e.g. DO-178 (4+ years) Education & Certifications
o Bachelor’s Degree in engineering or Technical discipline and 7 years of relevant experience OR
o Advanced Degree in engineering or Technical discipline and 5 years of relevant experience OR
o In the absence of a degree, 11 years of relevant experience is required

Candidate meeting requirements of an advance position would be considered depending on aerospace experience.
 
Job Number: 11304
Job Location: Jamestown, ND
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Systems Engineer

Description:
The Software Engineer will work with a global team of engineers on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Additional Job Details:
Basic Qualifications * Proficient with C programming language, and embedded systems in a lab environment. * Experience with Microprocessors, Microcontrollers, and/or DSPs * Excellent written and verbal skills * Good computer skills with ability to learn new programs/software * Ability to work under pressure and within time constraints * Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications * 6+ years experience in software development * Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA * Model Based Development, using SysML, Simulink or SCADE * Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A * Knowledge and use of ADA, Assembly, Perl, C# * Software Verification including, test procedure development, robustness testing and debug * Experience with software configuration management and problem reporting tools
 
Job Number: 49756
Job Location: Phoenix, Az
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Quality Assurance Engineer

Description:
Senior Quality Assurance Engineer
Santa Ana, CA

Morson International is currently seeking a Senior Quality Assurance Engineer to join our client, a leading manufacturing supplier within the aerospace and aviation industries. This will be on a contractual basis for their location in Santa Ana.

Under limited supervision is typically responsible for several production and development programs with unrelated/diversified families of parts and some number of programs manufactured on an infrequent basis. Also, usually assigned new hardware programs determined to be extremely complex. Is responsible for assuming any program, with any customer, within any business unit at any time. Develops and maintains quality standards and plans and procedures to assure company products meet required specifications, standards, and systems.

DIMENSIONS:

1. Relationships:
Internal - Interfaces on a regular basis with various departments at all levels of management. Provides timely and quality service to these internal customers.
External - Interfaces daily with customers and government representatives.

PRINCIPAL ACCOUNTABILITIES:

1. Writes manufacturing planning if required by program demands.

2. Identifies Quality’s needs for special tools, gauges and test equipment.

3. Assists the Contracts Department in estimating and planning new programs.

4. Identifies customer quality requirements by analyzing customer purchase orders and creating a quality plan meeting those requirements. Reviews company’s Bill of Material and adds quality requirements. Also, evaluates suppliers’ purchase orders ensuring they are approved sources and conform to quality requirements defined on Bill of Material.

5. Develops, writes and implements quality planning and assists in developing and writing manufacturing planning. Continually analyzes quality plans/processes.

6. Reviews and, as required, revises customer submittals of nonconformances and provides technical support to the customer where problems/questions arise. Investigates nonconformances to determine exact root cause and assigns corrective action required. Implements follow-up plan to verify corrective action is in place and effective.

7. Provides technical assistance to shop and receiving inspection personnel in areas such as interpretation of operation sheets and correct customer requirements.

8. Discusses with customers quality issues, such as interpretation/clarification of customer/supplier requirements. Plans and coordinates customer/supplier visitations to company.

9. Compiles and verifies proper and accurate documentation for part prior to shipping.

10. Provides instruction to final inspection advising of customer acceptance criteria for dimensional and visual standards. Performs visual inspections and audits blueprint dimensions of parts prior to shipping. Maintains records of these inspections indicating all quality requirements have been met.

11. Develops product substantiation data files. Presents file and part to designated supplier quality representative and customer field product quality engineer in compliance to customer requirements.

12. Audits processes to ensure compliance with appropriate procedures, practices and customer specifications.

13. Reviews, evaluates or originates internal company documents such as rework tickets, nonconforming material reports, tool orders, Bills of Material, drawings, material testing requisitions, etc.

14. Responsible for meeting quality cost objectives.

15. Responsible for meeting company inventory management goals.

16. May train employees, as required.

SAFETY – Maintains a constant awareness towards safety in the workplace and notifies supervision immediately of hazardous conditions and practices.

QUALITY – Exhibits commitment to quality performance in all aspects of every task or project performed.
PHYSICAL REQUIREMENTS:

May require prolonged periods of sitting, and/or standing.
May require periodic bending, reaching, crouching, kneeling, pushing and/or pulling.
May require periodic lifting up to 20 pounds.
May require repetitive use of hands and good manual dexterity.

MINIMUM POSITION REQUIREMENTS & SPECIFICATIONS:

EDUCATION

Requires a 4-year technical degree, or equivalent.

KNOWLEDGE AND EXPERIENCE

Requires 5 years quality engineering experience in an aerospace manufacturing environment. Non-destructive testing (NDT) or metallurgical background would be a plus. Requires the ability to read and interpret blueprints, understand the use of precision measuring instruments and possess a working knowledge of the application of Statistical Process Control (SPC) to manufacturing environment.

COMMUNICATION AND MOTIVATIONAL SKILLS

Must possess excellent interpersonal, leadership, organizational and communication skills.


The above description covers the most significant duties performed and are indicative of the normal daily assignments. Additional duties, including special or temporary assignments requiring similar or lesser skills may be added without the necessity for altering the description or re-evaluating the job.
 
Job Location: Santa Ana, CA
Rate: $45/hour
Per Diem: No
Overtime: Yes
Duration: 6 month contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Stephanie Vu
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
POSITION SUMMARY:
The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS:
1. Supports production needs as required when modification questions arise.
2. Addresses complex production issues related to engineering design.
3. Acts as the functional lead on large programs, which require multiple liaison engineers.
4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
5. Revises cabin monument designs for VIP cabins.
6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
7. Coordinates with Engineering project leads on redesign efforts
8. Provides guidance and feedback to other engineering personnel.
9. Supports the integration of structural and systems installation components within the aircraft configuration.
10. Ensures designs meet customer criteria, quality standards and FAA requirements.
11. Achieves established metrics for timely resolution of production issues during the program.
12. May represent the department during production meetings.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design (SolidWorks preferred)
2. Aviation background and aircraft interior experience preferred.
3. Expert knowledge of mechanical design and documentation standards.
4. Ability to work independently and cross-functionally.
5. Strong communication and problem-solving skills.
6. Strong time management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 341
Job Location: IN
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Circuit Design 5 CA

Description:
Staff Engineer Circuit Design 5 (Job Number: 19016165)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Aug 26, 2019

Target End Date: Aug 21, 2020

Pay Rate: $85/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Northrop Grumman Aerospace Systems has an opening for an Engineer Circuit Design 5 to join our team of qualified, diverse individuals. This position will be located in Manhattan Beach, CA.

The qualified candidate will be an experienced digital design engineer who will work on multi-million gate ASIC and FPGA developments in the areas of digital communications, signal processing, network routing and switching applications, or embedded processors for air and space applications. Responsibilities include but are not limited to:

- Conceptual Design
- Circuit Design
- Architecture Development
- VHDL Coding
- Design Verification
- Integration & Test


Basic Qualifications:

- Bachelor of Science Degree in Electrical or Computer Engineering
- Minimum of 14 years of experience in digital logic design and/or verification or
- Masters Degree plus 12 years of experience.
- Thorough understanding of high reliability ASIC and FPGA design and verification methodologies and processes

Preferred Qualifications:

- Master's plus 12 years of experience in digital logic design and/or verification
- Expertise in advanced verification methodologies and techniques including constrained random verification using System Verilog and OVM/UVM, assertions and functional coverage using PSL or SVA and modeling using C/C++, System Verilog or System C
- Hands-on testing ASIC/FPGA designs in emulation or flight hardware
- Experience in phases of digital design including requirement capture, architecture trade, implementation, integration, and test
- VHDL coding, design assertions, backend design (synthesis, design-for-test, timing analysis, power estimation
- Foundry interface (netlist handoff, place & route, timing closure, manufacturing vector generation)
 
Job Number: JK-1774ATO
Job Location: Redondo Beach, CA
Rate: 85/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.

The role will involve:
• requirements definition using DOORS or structured modelling,
• detailed design,
• code implementation using embedded C,
• validation of requirements and
• verification of implementation.
• managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change

Preferred Qualifications
• 6+ years’ experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 1910103342
Job Location: Phoenix, AZ
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
Staff Software Engineer

Phoenix, AZ
$68/hr
12 month W2 contract
First Shift
Possible Travel
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
• 6+ years experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 11111
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - Dynamic Impact Analysis of Airframe Structures - China

Description:
Stress Engineer - Dynamic Impact Analysis of Airframe Structures - China. 

Our Aerospace Client based in China is looking for additional Engineering Support. They require an Engineer for Dynamic Impact Analysis of Airframe Structures. 

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates. 

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years. 

Responsibilities: 

Constitutive theory of metal and composite material damage and 
failure model research. 

Test methodology study of metal and composite material on impact 
load. 

Computation program development of constitutive model. 

Computation method development of explict FEA. 

Skills/ Qualifications / Experience Sought: 

More than 20ys experiences on airframe structure impact analysis research. 

Be proficient at impact dynamic theory and test methods. 

Be proficient at explict FEA simulation and programs. 

Fluent English with good communication.
 
Job Number: BH-53-2
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer / Stress Analyst with Nastran & Abacus

Description:
*This is a 15 month contract position located in Palmdale, CA*

*No relocation is available, must have an active clearance to apply*

*On site position, per diem SPLIT is available for those out of town*


We are seeking a contract flight vehicle (fixed or rotary wing) stress / structural analyst who will be working on aircraft and or missiles applying knowledge to dynamics and stress of flight upon vehicles.


Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:

*Current Active Secret Clearance; Requires applicants to be US Citizens
*8+ years’ experience in stress/structural analysis of aircraft using FEM (Nastran or Abacus).

*Knowledge of SLIM or VISION.
*Good FEA and FEMAP skills.
*4 year engineering degree in ME, aerospace or equivalent
 
Job Number: 472
Job Location: Palmdale, CA
Rate: $85
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Structural Analysis Engineer

Troy, OH
$65/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead. Prepare static and fatigue analyses in support of drawing releases, development of qualification test requirements, and documentation of stress analyses for Customer review and MRB support. All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Job Details:
Bachelor's degree or equivalent in mechanical/aerospace/structural engineering or related discipline with a minimum of 10 years of directly related stress analysis experience is required.
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods is required
• Clear understanding of external loads, load paths and development of component and system free body diagrams is required.
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows is required.
• Strong written and verbal communication skills is required.
• Prior experience with ABAQUS or ANSYS FEA is required.
• Strong understanding of aerospace materials is desired.
• Working knowledge of CATIA V5 is desired.
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter) is desired.
• Good understanding of manufacturing processes is desired.
• Strong interpersonal skills is desired.
 
Job Number: 10993
Job Location: Troy, OH
Rate: 65.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
POSITION SUMMARY:
The structures engineer performs design, documentation, and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be responsible for creating design data in support of structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Designs mechanics aircraft primary or secondary structures for VIP business aircraft.
2. Designs structural modifications and structural provisions.
3. Designs repairs for aircraft structure that are beyond the scope of repair documentation
4. Supports the integration of structural and systems installation components within the aircraft configuration.
5. Create moderate to complex design of aircraft primary or secondary structures to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
6. Ensures designs meet customer criteria, quality standards and FAA requirements.
7. Review of service bulletins and airworthiness directives for applicability, and the generation of engineering documentation for the accomplishment of structural inspections and modifications.
8. Adheres to budget and project schedules.
9. Produces accurate designs and uses consultants when necessary.
10. May perform as functional “lead” for group on specific projects.
11. Assists in selection of components and materials to maintain aircraft configuration.
12. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. 2 – 4 years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design. SolidWorks or AutoCAD is preferred.
2. Must have top down modeling experience
3. Aviation background and aircraft interior experience preferred.
4. Must have analysis experience (tolerance or preliminary).
5. Knowledge of mechanical design and documentation standards.
6. Budget and project management experience required.
7. Ability to work independently and cross-functionally.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.



The Structures Company is an AA/EOE.
 
Job Number: 342
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structural Engineer

Location: Centennial, CO
Duration: 6 Months

Description:
This engineering function provides engineering design and systems integration for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics) and/or Ordnance Component/System design. This function develops sub-system and component designs and requirements to satisfy overall propulsion systems requirements. The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts. Generation of engineering drawings or changes as well as assembly and testing requirements is part of the job function.

Job Requirements:
A minimum of a bachelor's degree in Mechanical/Aerospace Engineering Discipline from an accredited university and 5 years of relevant job experience.

Preferred Qualifications:
Familiarity with fluids and thermodynamics designs. Familiarity with structural design. Proficient with mechanical design utilizing NX-11, Team Center, Model Based Engineering. Proficient with Microsoft Office platform tools and Project integration skills.
Propulsion-Ordnance System Design

Requires a bachelor's degree and 4 -8 years of experience (for external candidates only). Provides solutions to a wide range of difficult engineering/scientific problems. Solutions are imaginative, thorough, practical, and consistent with organization objectives. Contributes to the completion of specific programs and projects. Failure to achieve expected results would typically result in serious project delays. Works with minimal direction. Independently determines and develops approaches to problems. Work is reviewed upon completion for adequacy in meeting objectives. Receives guidance only on unusual or complex problems or issues.

Comments for Suppliers:
NX 11 is preferred, recent exp in either 10 or 9 is also acceptable. Team Center exp is a strong plus!
 
Job Number: 19-09020
Job Location: Centennial, CO
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/3/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Location: Fort Worth, TX
Rate: $60.06/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Active Secret Clearance is highly preferred, but not required****

Job Description:
1. Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well.
2. Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities.
3. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements.
4. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability.
5. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
2. Degree not required but must be experienced in aerospace design.
3. F-16 release system familiarity a plus.
4. Catia V5 design experience required.
 
Job Number: 11282
Job Location: Fort Worth, TX
Rate: $60.06/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Role: Structural Engineer
Location: Vandenberg AFB, CA
Duration: 6 months’ contract


Job Requirements:

• A minimum of a Bachelor's Degree in Mechanical/Aerospace Engineering
• Discipline from an accredited university and 5 years of relevant job experience.
• Requires a bachelor's degree and 4 -8 years of experience (for external candidates only).
• Provides solutions to a wide range of difficult engineering/scientific problems.
• Solutions are imaginative, thorough, practical, and consistent with organization objectives.
• Contributes to the completion of specific programs and projects.
• Failure to achieve expected results would typically result in serious project delays.
• Works with minimal direction.
• Independently determines and develops approaches to problems.
• Work is reviewed upon completion for adequacy in meeting objectives.
• Receives guidance only on unusual or complex problems or issues.

Preferred Qualifications:

• Familiarity with fluids and thermodynamics designs.
• Familiarity with structural design.
• Proficient with mechanical design utilizing NX-11/10/9 Team Center, Model Based Engineering.
• Proficient with Microsoft Office platform tools and Project integration skills.
 
Job Number: 50-1384
Job Location: Vandenberg AFB, CA
Rate: Hourly Rate
Per Diem: No
Overtime: Yes
Duration: 06 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer (Landing Gear)

Description:
The ideal candidate will:
• conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead.
• prepare static and fatigue analyses in support of drawing releases,
• develop qualification test requirements, and
• Document stress analyses for Customer review and MRB support.

All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. The Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Requirements:
• Bachelor's degree or equivalent in Mechanical / Aerospace / Structural Engineering or related discipline
• Minimum of 10 years of directly related stress analysis experience
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods
• Clear understanding of external loads, load paths and development of component and system free body diagrams
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows
• Strong written and verbal communication skills
• Prior experience with ABAQUS or ANSYS FEA

Desired Competencies:
• Strong understanding of Aerospace Materials
• Working knowledge of CATIA V5
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter)
• Good understanding of Manufacturing Processes
• Strong interpersonal skills
 
Job Number: 1910102322
Job Location: Independence, OH
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer 3 (Secret Clearance)

Description:
The ideal candidate will: •Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
•Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
•The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization.
•Tools utilized may include FEMAP, NX, and other software applications.
•Active Security Clearance

Basic Qualifications: •Bachelor of Science degree (ME/AE/CE) plus 5 years of experience in AEROSPACE Structural Analysis.

Preferred Qualifications:
•Knowledge of FEMAP and NX CAE.
•Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
•Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years.
 
Job Number: 1910102654
Job Location: Melbourne, FLA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Required Skills:
- Bachelors degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10742
Job Location: Savannah, GA
Rate: $65.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer

Description:
Secret Clearance is required for this position.  INTERIM CLEARANCE IS ACCEPTABLE



System safety engineer for the F-35 Joint Strike Fighter program.
Responsibilities include safety hazard identification for designs and changes to the Air System, hazard analysis, hazard mitigation including assignment of safety requirements to subsystem/components, and oversight through hazard control verification.
Perform contractual efforts for the system safety team to meet deadlines with high technical quality.
Coordinate and collaborate with internal safety team, product development teams, and customer entities.
This position requires special access and Secret clearance.
Requirements

Previous experience as a system safety engineer or software safety engineer
Good communication skills
F-35 aircraft design knowledge
Pilot certification
Functional Hazard Analysis
Weibull analysis
Statistics
MIL-STD-882
DO-178
DO-254
Education

BS in Engineering related field

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57690
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: 16 months
Start Date: Sept 2019
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
The ideal candidate will:
• Manage overall projects to assist in the technical planning, system integration, verification and validation, evaluating alternatives including cost and risk, supportability and analyses for total systems.
• Perform analyses at all levels of total system product including; concept, design, fabrication, test, installation, operation, maintenance and disposal.
• Conducts engineering processes using standard work, including verification and qualification procedures.
• Synthesize analyses of data and use the results to prepare technical reports of findings and recommendations.
• Seek to identify possible problems presented in applicable projects that may cause a delay or exceed budget. Contribute to finding appropriate solutions.
• Perform technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
• Consider and evaluates alternatives accounting for similar metrics.
• Ensure the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
• Decompose customer specifications and system level requirements into sub-system and piece part requirements and generate verification criteria and plans for the requirements.
• Perform architectural exploration.
• Manage configuration process, performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Requirements
• MS Office Suite
• Able to present findings and collaborate with other team members or functional leaders
• Experience with any one of the following: RTCA DO-178, DO-254, DO-330 and DO-331
• Aerospace Industry experience
• Travel up to 10% domestically and internationally

Preferred Qualifications
• Requirements Management software e.g. DOORS or equivalent
• MATLAB and Simulink or equivalent systems modeling software

Education & Certifications
• Bachelor’s degree and 7 years of relevant experience OR
• Advanced degree and 5 years of relevant experience OR
• In absence of a degree, 11 years of relevant experience is required
 
Job Number: 1910105164
Job Location: Jamestown, ND
Overtime: possible
Duration: 6-month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Jamestown ND
Rate: $62.00/hr
Duration: 6 months
Work Shift: 1st Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

o Manages overall projects to assist in the technical planning, system integration, verification and validation, evaluating alternatives including cost and risk, supportability and analyses for total systems.
o Performs analyses at all levels of total system product including; concept, design, fabrication, test, installation, operation, maintenance and disposal.
o Conducts engineering processes using standard work, including verification and qualification procedures.
o Synthesize analyses of data and uses the results to prepare technical reports of findings and recommendations.
o Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget. Contributes to finding appropriate solutions.
o Performs analysis at all levels of the total system product including concept, design, fabrication, modeling, test, installation, operation, maintenance and disposal.
o Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
o Considers and evaluates alternatives accounting for similar metrics.
o Ensures the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
o Decomposes customer specifications and system level requirements into sub-system and piece part requirements and generates verification criteria and plans for the requirements.
o Performs architectural exploration.
o Manages configuration process, performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
o MS Office Suite
o Able to present findings and collaborate with other team members or functional leaders
o Experience with any one of the following: RTCA DO-178, DO-254, DO-330 and DO-331
o Aerospace Industry experience
o Travel up to 10% domestically and internationally

Preferred Qualifications
o Requirements Management software e.g. DOORS or equivalent
o MATLAB and Simulink or equivalent systems modeling software Education & Certifications
o Bachelor’s degree and 7 years of relevant experience OR
o Advanced degree and 5 years of relevant experience OR
o In absence of a degree, 11 years of relevant experience is required
 
Job Number: 11305
Job Location: Jamestown, ND
Rate: $62.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
- Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

- Our client is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development.
- Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment.
- Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation.
- Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with modern software intensive mission systems architecture.
- Must be a US Citizen; this position will require a government security clearance.
- This position is located at a facility that requires special access.

Skills Needed:
- Read Engineering Drawings and Parts List
- Capture data digitally from parts lists and excel spreadsheets to form new lists
- Conduct meetings for changes to hardware allocations, tracking and reporting
- Project Planning, Architecture, Functional Allocations
- MS Excel, linking and pivot tables

Attributes:
- Good attitude about work and working with others
- Attention to detail
- Good communication skills
- Team player
- Initiative and ability to work
- Passion for detail and getting the job done in a timely fashion
- RF Testing experience
- Experience with harness design and fabrication
- Experience with hardware configuration management

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- Will accept experience in lieu of degree
- Manager will consider both 2 and 3 level candidates.
- Must have Aviation/Aerospace experience
- Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10789
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer ( Northridge, CA ) S9436479

Description:
Systems Safety Engineer ( Northridge, CA ) S9436479
6 Month Contract to Hire, high potential to convert

Pay rate: $70-100 /hr , flexible for the right candidate

Clearance: Active DoD Secret level clearance required

Interviewing ASAP

Qualifications:
- Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
• Minimum 7 years of related experience.
• High level understanding of tactical missile subsystems.
• Proficient with MS Office suite of products.
• Strong interpersonal skills and an ability to build effective working relationships are a must.
• Excellent attention to detail.
• Excellent oral and written communication skills and technical writing experience.
• Ability to communicate findings to varied audiences to gain support or resolve concerns.
• Self-starter capable of performing and prioritizing assigned tasks with very little direction.
• Familiarity with requirements development and risk management. //

Key responsibilities include:
• Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
• Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
• Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs
• Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
 
Job Number: S9436479
Job Location: Northridge, CA
Rate: Open
Per Diem: no
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technology Simulation Expert (Delmia) - China

Description:
Our Aerospace Client in China requires a Technology Simulation Expert to work with them locally in China.

Role:

The Successful candidate will be  responsible for assembly technology, process simulation analysis, motion mechanism simulation analysis and technology optimisation.

They will establish simulation models
 on the basis of the assembly issue on site. Formulate the implementation plan of process optimisation.

Establish ergonomic model on the basis of assembly situation, analyse human factors by means of simulation.

Provide suggestions on optimizing layout by simulation analysis on the basis of  workshop layout.

Train and manage the technology process simulation optimization team.


Required Skills and Experience:

Bachelors Degree or above, with more than 10 years of  relevant major work experience in DELMIA software, finite element analysis software, assembly process of  large passenger aircraft in advanced aviation manufacturing company.

Have experience of  process simulation analysis, motion mechanism simulation analysis, technology optimisation.

Have excellent communication skills and  analysis ability.

Experienced in  leading/ large aircraft manufacturing companies is preferred.
 
Job Number: BH-9-5
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Tool Design Engineer

Description:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


Requirements:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 276
Job Location: Mojave, CA
Rate: $58-$65/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search