Job Search Results

415 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/10/21 Monday 08:19PM Pacific Time by ContractJobHunter. )

Listings 1 - 415

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Structural Design Engineers - With CPD Or Fibersim Experience

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: MoJave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/15/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 10/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

A&P Aircraft Mechanic

Description:
 PDS Tech is seeking an A&P Aircraft Mechanic in Trumbull, CT
 
* This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
 
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.
 
Assigned Duties
  • Work independently with limited supervision.
  • Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
  • Perform repair of detail components by filing, stoning, lapping and polishing.
  • Using power and hand tools for drilling, sanding and riveting.
  • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
  • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
  • Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
  • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
  • Chemically treat repaired surfaces in accordance with approved data.
  • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
  • Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
  • Use hydraulic test equipment.
     

Experience Required 
  • High School Diploma or Equivalent required 
  • Aerospace Powerplant and/or Airframe license. 
  • Min. 2 yrs. experience in Aerospace Maintenance

 
Job Number: 1910106123
Job Location: Trumbull, CT
Duration: 18 months
Input Date: 09/05/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GZGYQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties
• Work independently with limited supervision.
• Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
• Use hydraulic test equipment.

Experience Required
• High School Diploma or Equivalent required
• Aerospace Powerplant and/or Airframe license.
• Min. 2 yrs. experience in Aerospace Maintenance.
 
Job Number: 1910106123
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 09/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Flight Mechanics

Description:
STS Technical Services is hiring A&P Flight Mechanics in Ypsilanti, Michigan!

Essential Duties & Responsibilities:
Will be flown to where the aircraft is
Maintain contact with maintenance control regarding aircraft condition
Troubleshoot and accomplish all required servicing of the aircraft including: wheel and brake replacement, engine oil servicing replacing burnt out light bulbs, wiping down struts, etc. Maintain control as work is completed
Perform other duties as directed by the GMM, maintenance control or his supervisor
Qualifications:
Must have A&P License and previous 747 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 42988
Job Location: Ypsilanti, MI
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Alcoa, TN
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Melbourne, Florida!

Job Summary:
Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Essential Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions
Consults the Maintenance Lead if technical assistance is needed during the repair process
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer
Completes work package documentation by signing/stamping after finishing all designated operations
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness
Provides supervisor with performance statistics and other operational data, as requested
Properly accounts for time and materials used in all inspection and maintenance activities
Qualifications:
High School/GED
A&P and structures experience a plus
A&P License; zero to two years’ experience with aircraft/general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft
Over one year actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools
Assignments require Minimal Knowledge beyond the assigned work
Demonstrates correct understanding of routine aspects of work
Knowledge of machines and tools, including their uses, repairs and maintenance
Knowledge of principles and processes for providing customer service
Skilled with repairing, troubleshooting, installing and equipment maintenance
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48152
Job Location: Melbourne, FL
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Abrams Contractor Combat Vehicle Mechanic

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.
Abrams Contractor Combat Vehicle Mechanic
(U.S. Citizenship Required*)
Fort Riley, KS
2019-9373

Responsibilities:
• Provide input to program planning, schedules, and maintenance techniques for the Abrams Fleet Vehicles and other tracked/wheeled vehicles.
• Identify technical problems and assist Field Service Representative in performing maintenance.
• Perform other duties as assigned by Leadership responsible for maintenance.

Qualifications:
• Must possess a valid State Driver's License and be able to obtain a tank driver’s license if required
• Must meet the anthropometric requirements to entry into the driver’s station or into an enclosed military vehicle
• Must be able to gain access to US Military facilities or bases
• Familiar with the modification and maintenance tasks on the variations of the Abrams Tanks (M1A1ED, M1A2SEP V2, M104, HAB) and other tracked/wheeled vehicles.
• Ability to effectively communicate (both orally & in writing) and interact with internal & external customers
• Ability to operate in a team and cross functional environment
• Efficient knowledge of Microsoft Applications
• Required to work at heights, lift and carry up to 50 pounds, able to climb, kneel, stoop, bend and work in extreme temperatures and weather conditions
• Must have overall understanding of customer contacts and relationships
• Maintain accountability of assigned tools and property
• Adhere to shop safety operations
• Able to work autonomously with government personnel.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or equivalent required
• Must have 3+ years of maintenance experience on tracked/wheeled vehicles; preferably on the Abrams Tanks

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9373
Job Location: Fort Riley, KS
Input Date: 09/05/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Software Developer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Software Developer
(US Citizenship Required*)
Scottsdale, AZ
2019-9540

Responsibilities:
• Develop embedded software for a Tactical RF system.
• Develop micro service based applications.
• Integrate 3rd applications into a micro service framework.
• Perform software requirements analysis, participates in research, designs, develops and tests software and tools, to include development of new work products or enhancing existing applications, systems or embedded products.
• Code, test, integrate and document software solutions.
• Apply principles and techniques of computer science, engineering, and mathematical analysis to the development of complex software and architectures.
• Research and analyze data, such as customer design proposals, market trends, state of technology and industry, specifications and manuals to determine feasibility of design or application.
• Participate in internal review of software components and systems.
• Receive little instruction on day-to-day work.
• Independently determine approach to solutions.
• Follow standard practices and procedures in analyzing situations or data from which answers can be readily obtained.
• Contribute and accountable to the completion of major programs and projects.
• Responsible for resolution of significant and diverse problems and issues of broad scope and complexity.
• Provide leadership and/or direction to lower level employees and teams.
• Work collaboratively with field application engineers to resolve complex customer support issues.
• Frequently work with organizations outside engineering or with external customers.
• Build stable working relationships internally.

Qualifications:
• Ability to obtain a Top Secret Security Clearance within a set time frame is required. Preferred, current Department of Defense TS/SCI - SI/TK clearance.
• Preferred- Experience in DSP associated with SIGINT/COMINT/ELINT and Electronic Warfare systems design, test and verification.
• Virtual Machine and Container technology and concepts.
• Fluency in C/C++, Python, and Java.
• Experience in a Continuous Integration/Continuous Deployment environment (DEVOPS) in a open source tool chain environment.
• Agile Development Methodologies.
• Proficient with embedded Linux and Windows.
• Development of DSP algorithms.
• Modeling in MATLAB.
• Preferred- SIGINT Systems, ELINT Systems, Electronic Warfare Systems, and Cyber Systems.
• Seasoned, experienced professional with a fully proficient understanding of software engineering concepts, principles and theories and expert at applying technical standards and methodologies to resolve a wide range of issues in creative ways.
• Capable of working on problems of diverse scope requiring extensive analysis of data and evaluation of a multitude of factors.
• Demonstrate fully proficient judgment in selecting methods and techniques for obtaining solutions.
• Fully proficient knowledge of the software development process as well as software engineering concepts, principles and theories.
• Fully proficient knowledge of other related engineering and support disciplines.
• Detailed and fully proficient knowledge of technology trends and champions new ideas and product process improvements.
• Ability to be creative, innovative and responsible, and able to master fully proficient decision-making skills.
• Ability to multi-task.
• Fully proficient ability to grasp and apply new information quickly.
• Fully proficient ability to handle significant responsibility, leadership and accountability while executing very complex assignments.
• Show initiative on assignments, and professionally executes projects with very little direction, or can provide direction and leadership to technical teams.
• Exercise independent judgement and sometimes defines new procedures and practices to improve team and company performance.
• Fully proficient ability to be a team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments.
• Advocate and champion at applying company policies and procedures to resolve very complex issues.
• Fully proficient in Microsoft Office applications.
• Fully proficient written and verbal communication skills.
• Fully proficient ability to recognize and clearly report relevant information.
• Skilled in communicating issues, impacts and corrective actions.
• Someone who is capable of providing technical leadership to an organization.
• Fully proficient ability to use the appropriate standards, processes, procedures and tools throughout the software development life cycle to support the generation of technical engineering products.
• Knowledgeable in Virtual Machine and Container technology and concepts.
• Proficient in C/C++, Python, and Java programming languages.
• Proficient developing for Linux and Windows systems.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Software Engineering or a related technical field is required (or equivalent experience), combined with a minimum of 8 years of relevant experience; or Master's Degree with a minimum of 6 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9540
Job Location: Scottsdale, AZ
Input Date: 09/04/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Systems Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Systems Engineer
(US Citizenship Required*)
Fairfax, VA
2019-9569

Responsibilities:
• Design, development, requirements validation and execution of the Air and Missile Defense Radar (AMDR) program.
• Work directly with program architects on a large geographically separated team, participating in all aspects of the development lifecycle.
• Deliver innovative, flexible, integrated solutions to meet customers changing business needs.
• Lead program/project efforts by directing and monitoring task completion.
• Effectively communicate, verbally and in writing, highly complex technical concepts.
• Exercise creative thinking to advance our business performance.
• Mentor midlevel and junior staff.
• Perform mission, functional, cost-benefit and risk analysis; making recommendations on systems architectures.
• Document security on new and fielded systems and provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.

Qualifications:
• Department of Defense Secret Security Clearance is required at time of hire.
• Desire to learn and push the envelope, willingness to take on strong challenges.
• A passion for innovation, along with a sophisticated understanding of various engineering systems and the ability to further advance General Dynamics Mission Systems technology
• Solid knowledge of requirements management and system modeling tools (MATLAB)
• looking for 5+ years performing RF/Radar systems engineering for a large DoD component contract with multiple subcontracts, experience with US Navy programs preferred
• Excellent communication skills
• Creative thinking with the ability to multi-task
• Ability to quickly grasp and apply new information
• Can effectively handle complex assignments
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Systems Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 5 years of relevant experience; or Master's Degree with a minimum of 3 years of relevant experience.
• Agile experience preferred.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9569
Job Location: Fairfax, VA
Input Date: 09/09/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Active Secret Clearance is highly preferred, but not required****

Job Description:
1. Candidate will primarily be responsible for developing equipment Installation designs, but may also support structural design activities.
2. Primary design activities will include detail design and release of trays, shelves and racks to support LRU installations, crew station panel designs, and power panel and matrix designs.
3. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T.
4. Candidate must be able to coordinate efforts with minimal supervision with other installation organizations such as ECS and Hydraulics, Harness, Structures, and other Subsystem teams as well as Stress Analysis, Materials and Processes, Manufacturing Engineering/Tooling, Maintainability, etc. across a wide range of functional organizations.
5. Although the primary assignment will be to support retrofit design, could also support mod line issues, production floor support, and field requests and repairs.

Education:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Degree not required but must be experienced in aerospace design.
3. F-16 release system familiarity a plus.
4. Catia V5 design experience required.
 
Job Number: 11283
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.

Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BH-56-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.

Skills/ Qualifications / Experience Sought:

Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BH-55-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Safety Assessment Expert - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Safety Assessment Expert.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Main Responsibilities:

  • Primarily work on the aircraft's safety assessment.
  • Take charge for PRA and CMA.
Skills/ Qualifications / Experience Sought:
  • Over 10 years safety assessment and certification experience.
  • Strong experience of Particular Risk analysis (PRA),especially
  • Survivability of Systems, Aft Pressure Bulkhead Rupture and Tail Strike.
  • Strong experience of Common Mode Analysis or certification.
  • Fluent English, with good communication skills.

 
Job Number: BH-60-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 10/08/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services offers Aircraft Sheet Metal Mechanic jobs for candidates with recent regional jet experience in Saint Louis, Missouri.

Qualifications:
Primary responsibilities will be working heavy checks in the hangar on EMB 145 and CRJ 700 regional jets in hangar and/or line maintenance environments
Must have at least two-to-three years of major sheet metal repair and overhaul experience
Experience working on EMB 145 & CRJ 700
Candidate must be willing to work overtime
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 43887
Job Location: St. Louis, MO
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Nashville, Tennessee.

Job Duties:
Will be working a WiFi project as well as other projects, and heavy checks
Qualifications:
Must have at least 5+ years’ experience on Regional or Commercial aircrafts in an MRO setting (this does NOT include production setting experience)
An A&P license is strongly preferred but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 47582
Job Location: Nashville, TN
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Milwaukee, Wisconsin!

Contract Length: 4+ months with the opportunity of going direct.
Start Date: ASAP
Pay Rate: Extremely competitive. Contact an STS Recruiter at 1-800-359-4787 for full compensation / benefits details.
Experience Required: Three (3) or more years — Entry-level candidates will be considered but at a different pay rate than experienced candidates

Aircraft Sheet Metal Mechanic Job Duties:
Work will be performed on CRJ 200 aircraft (prior experience working on this aircraft is preferred)
Maintain, modify and install the various components of aircraft sheet metal
Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external
Perform checks; carry out inspections and removal of components
Study technical manuals, blueprints and engineering drawings
Provide assistance to aircraft technicians and mechanics on various tasks
Perform final checks on assembly and installation of parts that were replaced
Maintain and keep track of all the maintenance records
Adhere to company policies and safety programs
Qualifications:
Active FAA Aircraft & Powerplant Certifications are not required for Aircraft Sheet Metal Mechanics but they are highly preferred
Three (3) years of maintenance experience with at least 12 months on the CRJ (in lieu of CRJ maintenance experience, we will consider candidates with six (6) or more years of aircraft sheet metal experience)
Entry-level candidates will be considered but at a different pay rate than experienced candidates than experienced candidates
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48764
Job Location: Milwaukee, WI
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Sheet metal Technician

Description:
Position Purpose:
The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

Principle Duties and Responsibilities:
1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
8. Conduct monthly 5S audits, as required.
9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
10. Assist in developing initiatives to meet individual OGSM requirements, as required.
 
Education and Experience Requirements:
High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
Other Requirements:
1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
2. Ability to read and interpret blueprints and engineering documentation.
3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment.
4. Ability to read, write, speak, and understand proficiently the English language.
 5. Demonstrates excellent communication skills, both verbal and written.
6. Adapts to sudden schedule changes.
7. Able to use tools and equipment associated with sheet metal work.
8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
10. Must be able to read, write, speak, and understand the English language.
 
 
Job Number: 1910103713
Job Location: Appleton, WI
Duration: 12 months
Input Date: 07/01/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/19/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technicians

Description:
STS Technical Services is hiring Aircraft Structures Technicians in Great Falls, Montana.

Duties & Responsibilities:
Provide technical assistance or guidance to the crew.
Communicate when tasks are complete so next trade can move onto the job.
Ensure work environment is safe and clean.
Promote company values, vision and mission. Demonstrated capability and competency in field of expertise.
Excellent oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Possesses strong fundamental aircraft knowledge. Builds quality capability and responsiveness.
Carry out maintenance repairs on customer aircraft.
Sign work sheets and work cards for work accomplished – completely and accurately.
Qualifications:
2+ years’ aircraft structures maintenance experience as a structures technician required.
Possess excellent oral and written communication skills required.
Demonstrated ability to work well with other individuals throughout the organization.
A&P License preferred.
CRJ structures experience preferred.
The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job.
The employee will be required to occasionally lift 50 pounds
Bend, stoop, kneel, crawl, and climb ladders.
Stand for extended periods of time
Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48060
Job Location: Great Falls, MT
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Airworthiness Operations/Computer Systems Analyst, San Diego, CA 92128

Description:
PDS Tech, Inc. is seeking a Airworthiness Operations/Computer Systems Analyst, San Diego, CA 92128
3 month contract with possible extensions.  Must be a US Citizen and able obtain DoD Secret level clearance or have an Active Secret  Clearance or better to qualify. 

Summary:

  • The Airworthiness directorate is looking for a computer systems analyst to support and maintain existing Airworthiness applications, address areas of need and propose, plan, develop, test and deliver new applications to support business processes.
  • Conduct existing application coding as a role out to new customers.

Basic Qualifications:
  • Bachelor's Degree plus 6 Years; OR Master's Degree plus 4 years' experience.
  • Ability to obtain DoD Secret level clearance.  Clearance Required: Secret 

Preferred Qualifications:

  • Expert level experience in: C#, JavaScript, T-SQL.
  • Strong written and verbal communication, including presentation skills to senior leadership.
  • Ability to work independently.
  • Experience in Aerospace, Defense or related industries highly desired.
  • Keep abreast of and put to practice the latest coding best practices, methods and integration.
  • Be knowledgeable of SharePoint, VBScript & Python.
  • 9/80 Work Schedule
  • Shift: 1st Shift 
     

 
Job Number: 1910106094
Job Location: San Diego, CA
Duration: 3 months
Input Date: 08/26/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GZAeQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Assembler
(U.S. Citizenship Required*)
San Antonio, TX
2019-9577
Responsibilities:
• Perform advanced, specialized or prototype production assembly operations on structural parts, mechanical assemblies and subassemblies using automated assembly operations.
• May provide assembly operation guidance to other assemblers.

Qualification:
• Must be willing and available to support multiple shifts.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Education/experience typically acquired through basic education (e.g. High School diploma/GED) combined with 7+ years of related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9577
Job Location: San Antonio, TX
Input Date: 09/09/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Avionics Assistant Manager

Description:
Aerospace Engineering specialist. 
  • Aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/Nav/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
  • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
  • 5+ years of aerospace experience.
  • Familiar with CPDLC/ACARS and Experimental Flight Testing
  • Ability to think critically, identify and synthesize important information necessary to inform flight test.
  • Strong ability to analyze test data/results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
  • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
  • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
  • Ability to represent professionally and positively among MFC teams interactions and actively build rapport and trust.
  • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
  • Management skill: Allocate task, control working time and work shift/rotation plan

Aerospace Engineering specialist 
  • Aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/Nav/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
  • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
  • 5+ years of aerospace experience.
  • Familiar with CPDLC/ACARS and Experimental Flight Testing
  • Ability to think critically, identify and synthesize important information necessary to inform flight test.
  • Strong ability to analyze test data/results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
  • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
  • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
  • Ability to represent professionally and positively among MFC teams interactions and actively build rapport and trust.
  • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
  • Management skill: Allocate task, control working time and work shift/rotation plan

 
Job Number: 1810081415
Job Location: Moses Lake, WA
Duration: 24 months
Input Date: 02/09/2018
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dvoRAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Safety Engineer

Description:
We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

Responsibilities of the Avionic System Safety Engineer

Creation and integration of SFHA/SSA/CMA Avionics Systems.
Technical coordination with aviation authorities including FAA, JCAB and EASA.
Technical scheduling and coordination with suppliers and internal departments.
Other activities related to Safety Assessments.



Requirements of the

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
8 plus years of experience in Avionics System Safety.
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians (Special Term)

Description:
STS Technical Services is hiring Avionics Technicians in San Antonio, Texas.

Qualifications:
5 years of troubleshooting experience and avionics systems knowledge on any of the following aircraft platforms, Boeing 757s, 767s, 787s, MD-11s
Must have completed avionics modification work in the last 1 year
A&P License is a plus, but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 45155
Job Location: San Antonio, TX
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Buyer

Description:
Chipton-Ross is seeking a Buyer for an opening in Cypress, CA.

RESPONSIBILITIES:
Analyzes demand and plans supply in accordance, ensures efficient and quality execution of requirements and purchasing action messages, manages supplier delivery, quality, and cost performance and improvement.
Role Assignment
" Acts as authorized agent of the company, making financial commitments and managing key supplier relationships to ensure supply chain performance
" Manages complex supplier accounts, requiring advanced knowledge of commodity, supply base, and program
" Responsible for key suppliers, significant spend, and challenging supply chain problem resolution
" Provides peer review and oversight to junior Purchasing Agents
" Possesses solid working knowledge of subject matter

Purchasing Execution
" Make daily purchases and input into MRP system based on demand, while analyzing the quality, specifications, and delivery requirements
" Ensure just in time supply aligns with loaded demand to maintain inventory targets
" Send out quotations for bid on non-contracted items, and negotiate best price
" Interface with planning and purchasing Integrated Program Team (IPT) to ensure any changes in schedule or requirements are flowed down to suppliers
" Review purchase orders regularly and follow up on unconfirmed orders, past due items, etc.

Supplier Management
" Generate effective communication, good relationships, and a positive image with suppliers, promoting courtesy, objectivity, and fairness
" Act as authorized agent of the company and primary contact to assigned suppliers
" Proactively manage suppliers and regularly assess performance to ensure on-time delivery of quality product
" Manage program shortages and ensure supplier commitments are communicated to IPT Lead
" Review non-conformance reports (NCRs) against supplier product and communicate and coordinate disposition
" Identifies and mitigates risk, solves problems, and escalates as needed to IPT Lead and/or Purchasing Manager

REQUIRED EXPERIENCE:
" Minimum 3 years of supply chain/purchasing/sourcing experience
" MRP system experience
" MS Office Skills (Excel, PowerPoint)
" Strong written and verbal business communications abilities
" Self-starter with ability to drive improvement, meet timeliness and objectives
" Identifying problems working with teams to solve through leading actions collaboratively
" Ability to analyze and communicate requirements
" Ability to apply Supply Chain past experience to current environment and modify as needed
" Ability to negotiate, influence, and win respect
" Ability to make timely decisions and take action
" Ability to provide information regarding tasks, plans, schedule and strategy to stakeholders
" Customer service oriented

PREFERRED EXPERIENCE:
" Bachelor's degree in business, supply chain or program management
" Previous experience supporting manufacturing, aerospace preferred
" Ability to read and analyze engineering prints

EDUCATION:
Accredited Bachelor's degree or equivalent experience

WORK HOURS:
M-F + Daily OT
1st Shift start (flexible 7 or 8:00 am) - 8 Hour Shift
Full-Time

 
Job Number: 181532
Job Location: Cypress, CA
Rate: $25 to $30.00 DOE
Input Date: 09/09/2019
Last Updated: 10/21/2019
Firm Name: CHIPTON ROSS
Attention: Chelsie Goodreau
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cgoodreau@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC / PLC Machines Expert (Aerospace) - China

Description:
Our Aerospace Client in China requires an CNC / PLC Machines Expert to work with them in country.

Job Role:

The ideal candidate will be responsible for production line development, system testing, debugging, maintaining and providing technical guidance.

They will  analyse the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions.
They will be responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle.

Following up the project progress in time, leading the team to solve the problems that are related to the site production line, ensuring the project is completed on time.

Be responsible for intelligent manufacturing & AI research subjects application.

Be responsible for intelligent manufacturing information management and programming.

Qualifications & Experience:

Bachelors graduates or above, with more than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development.

Familiar with R&D, production, management process in the aeronautical field.

Familiar with organizational intelligent manufacturing related to equipment software, hardware technology and organisational information management software.

Proficiently program the equipment control system of intelligent manufacturing.

Experience of Leading organization intelligent manufacturing.

Experienced in intelligent manufacturing and industrial robotics is preferred.

Familiar with information system or software development, programming 

Experience with Siemens, Heidenhain and Fanuc machine system setting up, PLC modification and optimisation and overseas working experience is preferred.
 
Job Number: BH-10-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Sr. ProE / CREO Designers

Description:
Minimum 9 years of design/drafting experience using Pro-E/Creo 4 CAD system.

Experience in vehicle or aerospace design (any kind of vehicle)
 
Job Number: PL CREO
Job Location: Sterling Heights, MI
Rate: $45-54/per hour
Per Diem: Possible
Overtime: possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 10/03/2019
Last Updated: 10/21/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions:
1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings.
2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods.
3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture.
4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP).
5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions:
1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
2. Performs other duties as required. 



 


 



Education and Experience Requirements:

High school diploma/GED.
Two (2) years experience in wood finishing.
Experience in aerospace industry preferred.
Basic knowledge of cabinet finishing processes and products.



Other Requirements:
1. Possess a working knowledge of inspection and process specifications.
2. The ability to read, write, speak, and understand the English language.
3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
4. Must be computer literate.





 


 



 
Job Number: 1910104471
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/18/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTiIQAW&URLSource=cjhunter

Cabinetmaker II

Description:
PDS Tech is seeking an Cabinetmaker II  for an open position in Savannah, GA. 

Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. 2. Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. 3. Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Other Requirements: 1. The ability to read write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.
 

Unique Skills:



Must be able to work any shift and overtime as required.




Education and Experience Requirements: 

High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of inspection and process specifications preferred.




 


 
Job Number: 1910105579
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/14/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX5IQAW&URLSource=cjhunter

Cabinetmaker II

Description:
PDS Tech is seeking an Cabinetmaker II  for an open position in Savannah, GA. 

Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. 2. Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. 3. Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Other Requirements: 1. The ability to read write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.
 

Unique Skills:



Please ref. job description




Education and Experience Requirements: 

High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of inspection and process specifications preferred.




 


 
Job Number: 1910105358
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/05/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWS9QAO&URLSource=cjhunter

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 10/15/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Composites Manufacturing Engineer (2nd shift)

Description:
PDS TECH has an exciting opportunity for Mfg Engineers for our client in San Diego, CA.

If you are available, interested and would like to be considered, please call/send resume to:
Hemant – hsachdev@pdstech.com 714-384-0004 
 



DUTIES & RESPONSIBILITIES:
  • Oversee prototype and pilot builds, document the build process with standardized work instructions, define and implement new manufacturing technologies.
  • Provide documentation and make technical presentations as required; Devise new approaches to resolve unusual or complex composite manufacturing problems through early, upfront design-for-manufacturing (DFM) principles to ensure producibility, inspectability, testability, maintainability and repairability.
  • Manage the verification, control, effectivity and release of automation files, i.e. ply nesting, laser projection, oven/autoclave programs, and/or work instructions.
  • Apply statistical methods and perform mathematical calculations to determine composite manufacturing processes, staff requirements, and production standards.
  • Work continuous improvement projects to eliminate tribal knowledge and coordinates quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost.
  • Lead Process Failure Mode Effects Analysis (PFMEA).
  • Communicate with management and user personnel to develop production and design standards.
  • Estimate production cost and effect of product design changes for management review, action, and control.
  • Formulate sampling procedures and designs and develop forms and instructions for recording, evaluating, and reporting quality and reliability data.
  • Record or oversee recording of information to ensure currency of engineering drawings and documentation of production problems. Study operations sequence, material flow, functional statements, organization charts, and project information to determine worker functions and responsibilities.
  • Implement methods and procedures for disposition of discrepant material and defective or damaged parts, and assess cost and responsibility.
  • Evaluate precision and accuracy of production and testing equipment and engineering drawings to formulate corrective action plan.
  • Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization.
  • Specify and implement equipment and processes.
  • Liaison work orders as required to reflect process changes, non-conformity dispositions and engineering changes.
  • Develop and maintain work instructions to guide technicians in the assembly of assigned products.
  • Provide support for the disposition of non-conforming product, identify root cause, and lead/assist in the implementation of corrective/preventative actions
  • Employ Lean Manufacturing methodologies for waste reduction, .e.g., 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
  • Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality/ Yield, reduce Cost, and improve Productivity/Schedule.
  • Prioritize, initiate and lead lean manufacturing process improvement projects.
  • Review and approve engineering designs and changes and ensure their manufacturability.





Essential Qualifications
Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.

Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.

Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required.

A Professional Engineering License and original work published in professional engineering journals are desirable.
 




  • This position requires depth and breadth of aerospace composite manufacturing, processing and materials knowledge.
  • Project engineering and management experience required.
  • Must be able to multitask multiple and complex projects while staying organized in a fast-paced environment.
  • Must be able to collaborate, negotiate, and work with internal and external groups to ensure ideas come to fruition.
  • Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
  • Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
  • Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects.
  • Must be a U.S. Citizen.
  • This position is 2nd shift





 
Job Number: 1910103645
Job Location: Poway, CA
Per Diem: Yes
Duration: 6 months
Input Date: 06/19/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQgRQAW&URLSource=cjhunter

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

Job Summary


This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities 

  • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
  • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
  • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
  • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


  • Prepare analysis and verification of product costs in support of special projects from the engineering group
  • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Qualifications:
  • Must have an Active DoD Secret Clearance
  • Excellent computer skills (EXCEL, PowerPoint, & Word).
  • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
  • 2 years of experience in estimating techniques or labor time standard development
  • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications 

  • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
  • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
  • Understanding of contractual agreements (FAR, TINA).
  • Strong analytical and planning skills
  • Excellent computer skills (MS Office Suite).
  • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
  • Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Goleta, CA ) 9115572 and 9246002

Description:
Design Engineer ( Goleta, CA ) 9115572 and 9246002
6 + Month Contract

Pay rate: $60/hr W2

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership
 
Job Number: 9115572 and 9246002
Job Location: Goleta, CA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/18/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Design Engineer - Interiors

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 8+ years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design (SolidWorks required)
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: IN
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Hazelwood, MO
2019-9480
Responsibilities:
• Work with customers to develop and document complex electronic and electrical system requirements.
• Analyze and translate requirements into system, hardware and software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researche specific technology advances for potential application to company business needs.
• Position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems.
• Evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink.
• Work with the latest generations of aircraft platforms (both commercial and military).
• Develop diagnostic models from schematics, FMECAs, and other available supplier documentation.
• Translate these models to a Times Failure Propagation Graph (TFPG) model via scripts.
• Translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts.
• Work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

Qualification:
• Ability to obtain a Secret Security Clearance is required.
• Have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate).
• Able to analyze complex electrical and mechanical subsystems is essential.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 5+ years of experience in an engineering classification; or a Master's Degree with approximately 3+ years of experience in an engineering classification; or a PhD with experience in an engineering classification.
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9480
Job Location: Hazelwood, MO
Input Date: 09/05/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Okalahoma City, OK
2019-9523
Responsibilities:
• Work with customers to develop and document complex electronic and electrical system requirements.
• Analyze and translate requirements into system, hardware and software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
• This position supports a 9/80 work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 5+ years of experience in an engineering classification; or a Master's Degree with 3+ years of experience in an engineering classification; or a PhD with experience in an engineering classification.
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9523
Job Location: Oklahoma City, Okalahoma
Input Date: 09/04/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/21/2018
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/10/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

ERP Analyst

Description:
PDS Tech, Inc. is seeking a ERP Analyst in Hazelwood, MO. 

Job Purpose


Maintain synchronization of the supply chain between various organizations, customers, and suppliers by managing product requirements, inventory systems, and production flow of work in process. Lead work in flow management by coordinating all day to day activities and communicating what needs to be done to operations and ensure all material is available prior to shop floor expected execution. 

Principal Accountabilities



  • Develop and implement strategy to communicate daily work schedule created by the Schedule/Planner to operations.  Ensure the appropriate schedule information to ensure the schedule is achievable.
  • Execution of the manufacturing work orders, tracking and reporting to ensure compliance to the daily schedules. Identify issues that prevent the successful execution of the daily schedules.
  • Provides the shop floor with work cell schedules based on the master production schedule.
  • Conduct Pre-Ops Readiness Reviews to ensure availability of required tooling, materials, planning, work instructions, and capacity to execute the daily schedules.
  • Expedite flow of materials, parts, and assemblies within or between departments in accordance with production schedules.
  • Maintains manufacturing LOB status, commitments and schedules.
  • Performs ERP and related business system transactions as required to support operations, supply chain and inventory management and business system compliance.
  • Releases, prints and delivers work orders to the start of the manufacturing process.
  • Performs cycle counts and make adjustments as necessary to inventory to ensure appropriate inventory reporting.
  • Manages WIP to ensure it continues to move through the production flow and raises issues that prevent the adequate flow of material to meet the production schedule.
  • Perform all duties in compliance with company policies and procedures.

Please email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss 




 

Education


BS/BA in Supply Chain/Business Administration or other relevant discipline preferred, and/or a combination of education and relevant experience in lieu of a degree. Recognized material management certification such as APICS preferred.

Required Qualifications & Experience



  • Requires 3 years of experience in Supply Chain Management or Manufacturing/Enterprise Resource Planning.
  • Proficient knowledge of Microsoft Office Software, including Word, Excel, Access, and Outlook.
  • Proven/demonstrated knowledge of Lean Manufacturing principles and working with Standard Work Instructions.


Additional Desired Qualifications & Experience



  • Previous experience working in a manufacturing environment and scheduling organization preferred.
  • Previous experience and working knowledge of ERP, MRP and other manufacturing systems preferred.
  • Ability to communicate clearly and professionally both orally and in writing.
  • Understanding and working knowledge of a manufacturing environment.
  • Excellent interpersonal skills.
  • High level of accuracy in reporting.
  • Self motivated with an ability to multitask with many diverse assignments.
  • Self directed to perform work with minimal supervisory oversight.


 PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 


 
Job Number: 1910105596
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 3 months
Input Date: 08/13/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX87QAG&URLSource=cjhunter

EWIS Senior Components Engineer

Description:
We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

Responsibilities of the EWIS Senior Components Engineer

Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
Creating and executing the EWIS group certification plan.
Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
Review the preparation of documents defining aircraft environment and approved part usage.
Approve testing required for components and EWIS harness assemblies qualification.
Review of manufacturing processes related to EWIS harness assembly construction and installation.
Procure QTP/QTRs or similarity reports from EWIS components suppliers.
Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
Determine or update the qualification requirements of all EWIS components.
Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
5-10 years of experience with EWIS and air fact certification.
Excellent communication skills.
 
Job Location: Japan
Input Date: 10/18/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: Mcalderon@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:

Electrical/Controls Engineer



Our Client is searching for an Electrical/Controls Engineer who wish to advance their career in the aerospace and/or power generation field. Reporting to the Engineering Supervisor, the primary focus of this addition to the Engineering Department is to analyze, control, modify, and execute programs in CNC Machine Controllers. The Electrical/Controls Engineer will also assist and/or define electronic control requirements of CNC equipment as well as plan and provide for control of programming to prevent accidental loss (i.e. power outage) and provide protection of data. Additionally, the person in this role will perform and assist in interfacing all machine/equipment upgrades or additions. Our client offers competitive wages and a full benefit package which includes medical (both a PPO plan and a high deductible plan), dental, vision, life insurance (both company provided and optional purchase by the employee), short and long-term disability, 9 paid holidays per year, paid vacation time and the chance to contribute to the 401K plan which has a $0.50 match for every dollar you contribute up to the first 6%. On top of all that, our client offers a clean and climate controlled environment to work in.



Essential Duties and Tasks:

Analyze , control, modify and execute programs in CNC Machine Controllers.

Fanuc CNC integration, repair and maintenance.

PLC, ladder logic, servo systems, variable frequency drive, digital and analog systems.

Utilize 2D and 3D computer graphics with some proficiency.

Perform diagnostic and follow-up maintenance on electronic equipment including, but not limited to PLC, robotic, and CNC controllers.

Define electronic control requirements of CNC equipment.

Provide advice to internal personnel on any equipment and tooling designs requiring electrical/electronic interface.

Coordinate electronic CNC controller programming with information systems.

Assist and support install of all new equipment.

Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment.



Qualifications, Education and Experience:



BS or AS in Electrical Engineering or 3+ years of experience building electrical devices and controls for machines used in manufacturing.

Ability to read machine electrical schematics of machines and electronics.

2D CAD experience for electrical schematics; AutoCAD and 3D CAD experience desired.

Knowledge of Ethernet wiring, basic network configuration and networking concepts.

Experience programming manufacturing machines (CNC, ladder, object-oriented programming).

Experience troubleshooting electrical, mechanical and/or computers.

Experience working with hands/hand tools to build and repair mechanical and electrical devices for machine troubleshooting and repair.

Fanuc CNC experience a plus.

Ability to perform multiple tasks simultaneously.

Strong electronic and machine language programming skills.

Demonstrated ability to influence others positively in order to achieve positive work results.

Ability to communicate effectively at all levels with external and internal customers.

Ability to effectively work with skilled trades on various aspects of building CNC machinery.

Strong problem-solving skills with creativity and tenacity.

Occasional travel.



Always take ownership and be accountable for your actions. This job description is a tool to be followed. Other job duties my be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. Good and reliable attendance, positive attitude, and always take ownership of your job and team.



EEO Statement:



Our client provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability status, or any other classification protected by state, federal, or local laws. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of the characteristics. Discrimination of any type will not be tolerated.



Experience:




  • Electrical Engineering: 1 year (Preferred)

  • CNC machining: 1 year (Preferred)



Education:




  • Bachelor\'s (Preferred)



Benefits:




  • Health insurance

  • Dental insurance

  • Vision insurance

  • Retirement plan

  • Paid time off



This Company Describes Its Culture as:




  • Stable -- traditional, stable, strong processes

  • People-oriented -- supportive and fairness-focused

  • Team-oriented -- cooperative and collaborative



Schedule:




  • Monday to Friday

  • Day shift

  • 8 hour shift


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34669
Job Location: Mason, OH
Rate: 95000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-02 00:00:00.0
Input Date: 08/21/2019
Last Updated: 10/07/2019
Firm Name: NESCO RESOURCE
Attention: Mary Beth Principe
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Vandenberg AFB, CA
Duration: 6 Months

Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Facility Systems Electrical Engineer - Member of the Engineering and Infrastructure department whose responsibilities include the design, operation and maintenance of ground (fixed and portable) electrical power systems used at all client Sites.

Assignments will include electrical engineering support of, but not limited to:
- Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
- Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
- Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
- Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
- Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
- Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
- Disposition of corrective actions and coordination with cross- functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
- Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
- Develop and coordinate technical portions of proposals, statements of work and contract specifications. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
- Must understand and comply with (EWR 127- 1) Range Safety design and operational requirements in performance of duties
- Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing

External Basic Requirements:
- Bachelor’s Degree is required (Electrical Engineering degree is preferred), will consider Mechanical or Aerospace Engineering Degree with equivalent real- world work experience.
- 2- 6 years of experience working electrical/power engineering in an Aerospace, Utilities, or similarly complex environment. A Master’s Degree in Electrical Engineering may be used to satisfy 2 years of experience.
- Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
- Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
- Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
- Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high-pressure gases.

Requires a bachelor’s degree and 2 - 6 years of experience (for external candidates only). Provides solutions to a variety of engineering/ scientific problems that require knowledge of company products and processes. Contributes to the completion of milestones associated with specific projects. Failure to achieve expected results may cause project delays and result in additional costs. Works under general supervision. Interprets procedures when performing an assignment. May modify adjustments to standard approaches. Work is reviewed for soundness of technical judgment, overall adequacy and accuracy.
 
Job Number: 19-12035
Job Location: Vandenberg AFB, CA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/30/19
Input Date: 09/09/2019
Last Updated: 09/26/2019
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 10/08/2019
Last Updated: 10/18/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Into Service Specialist

Description:
We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

Responsibilities of the Entry Into Service Specialist

Coordinate and integrate all the areas responsible for the Entry into service including:
Flight operations engineering and pilots, training support, program management, material and services support and production lines.
Maintenance support and technical publications
Contracts management.
Air safety and certification teams and ground support equipment
Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
Initial Pilot Training
Initial Flight Attendant Training
Pilot Support (En Route Supervision)
Flight Operations Engineering Course (FOEC)
Flight Operations Engineering Support
Pilot Support (Ferry Flight)
RAS or SCAP Module
Inflight Performance Software
Performance SW
Reconfig. of the Flight Operations Publications Set
Dispatcher SW
Flight Dispatchers Course
Balance & Trim Chart
Maintenance Theoretical Type Training (B1 + B2)
Maintenance Practical Type Training (B1 + B2)
Technical Representative
Maintenance Specialists Support
Health Monitoring Training (Basic Module) & CMC Usage
Maintenance Program Start-up and Packaging
Reliability Training
Techpubs Subscription and training
RSPL Budgetary
MPD/MMEL
Suppliers Conference
TC Approval
Aircraft Operator Certificate Operational Approval
Direct Maintenance Cost
MRO Certification
GSE

Requirements of the Entry Into Service Specialist

Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
8 or more years experience with Entry into Service for new aircrafts.
Excellent working relationship with airline customers and suppliers.
Knowledge of the aircraft delivery process.
Working experience in customer support industry and supplier negotiation.
Team management skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/25/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Entry Level Technical Writer

Description:
PDS Tech is seeking an Entry Level Technical Writer.

In this role, you will:
  • With guidance and supervision, analyze and review work instructions, Quality management documentation, Operational processes and logistics flows to ensure quality and compliance of the activity.
  • Work closely with the quality department to align procedures and work instructions with aerospace standards and customer requirements.
  • Observe, document, and understand logistics processes and support the design phase of the processes.
  • Provide work instructions in line with quality and process requirements.
  • Optimize quality and process documents package to perform the logistics activity within designated governance while optimizing performance.

 
  • MS Office Required
  • Clear communication
  • Warehouse experience preferred
  • Aviation Experience a plus
  • HS Diploma or GED required
  • Bachelor's degree preferred

 
 
 
Job Number: 1910099053
Job Location: Mobile, AL
Duration: 3 months
Input Date: 07/18/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jUnmQAE&URLSource=cjhunter

FAA Quality Inspector

Description:
FAA Quality Inspector

Windsor Locks, CT
$43.56/hr
1 year W2 contract
Split Shift: M-W: 10AM-9:30PM
S-S: 7AM-12PM
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Customer Service organization is seeking an experienced quality professional to work on a variety of initiatives in support of quality performance initiatives. This is a unique opportunity for a compliance oriented quality professional interested in a technical and regulatory career as a representative for the Federal Aviation Administration (FAA). Upon hire, the selected candidate will work closely with experienced FAA ODAs to perform regulatory compliance inspections and technical document reviews. This experience will enable the individual to master the capabilities of independently evaluating material for correct technical content, accuracy and adherence to Company QMS. This will position the selected candidate on the career growth path to ultimately become an FAA Organization Designation Authorization (ODA). The individual is expected to develop core quality competencies for support of the quality team and quality initiatives. As part of the quality team the individual must utilize their interpersonal strengths to effectively communicate with internal and external customers to support quality escape investigations due to material shipping from the Distribution Centers. In this position there will be interaction with internal sites and external suppliers as needed to support quality objectives.

This position requires well rounded knowledge of aerospace systems; including but not limited to, hardware, LRUs, components, and test stand configurations. It requires ability to interpret and work from complicated drawings, specifications, procedures, and instructions to configure and inspect a variety of aerospace systems components, LRUs, modules, and associated materials.

Core Responsibilities
* Perform visual and dimensional inspection of major and minor components.
* Perform inspection of LRU assemblies.
* Perform quality evaluations of incoming customer returns to ensure compliance and document receiving issues.
* Support the DC Quality Clinic process to ensure compliance and process certification
* Files documents and maintain quality assurance record systems as required.
* Interface with multiple BUs to support high impact quality issues.
* Interface with DCMA as needed.
* Support CAB activities related to the DC.
* Internal and process audits.

Experience Required
* 5+ years relevant quality experience specific to Company product
* Minimum 3 years of inspection experience.
* Interpret and work from blueprints, overhaul manuals, customer specification, purchase orders, certification, written and verbal instructions
* Experience in using measuring instruments such as: calipers, micrometers, height gauge
* Experience interpreting drawing requirements
* Inspect and record all dimensions with applicable measuring tools
* Experienced in customer escape management (DIVE, RRCA, Mistake Proofing)
* Understanding of auditing requirements to industry and regulatory requirements (FAA Part 21 as well AS9100 / AS9120 preferred)
* Strong communications and interpersonal skills
* Good analytical skills to develop, monitor, and interpret key metrics and business indicators, as well as engineering print requirements
* Must have excellent organizational skills, able to work independently, and operate across organizational levels
* Computer skills- Proficiency in Word, Power Point, Excel, Access
 
Job Number: 11445
Job Location: Windsor Locks, CT
Rate: 43.56
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/05/2019
Last Updated: 10/16/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

FPGA Engineer
(US Citizenship Required*)
Fairfax, VA
2019-9568

Responsibilities:
• Design and develop firmware for the Digital Receiver Exciter and Digital Beamformer for the Air and Missile Defense Radar (AMDR) Program.
• Work on a large geographically separated team, participating in all aspects of the development lifecycle including design, development, integration and test.
• Very High Speed Integrated Circuit Hardware Description Language (VHDL) experience and associated modeling and simulation tools
• Embedded software development and/or digital board design experience
• Experience with high speed digital electronics, proper timing and debugging capabilities
• An understanding of Digital Signal Processing (DSP) techniques and layout of high-speed digital boards
• Desire to learn and push the development envelope, willingness to take on strong challenges.
• Recent experience with Xilinx Virtex 6&7 with Xilinx support tool ISE and Vivado tool

Qualifications:
• Department of Defense Secret Security Clearance is required at time of hire.
• Hardware development experience using FPGAs, microprocessors, high speed digital circuits in embedded designs.
• Excellent communication skills
• High performance FPGA based board development experience
• An existing Department of Defense SECRET security clearance
• Creative thinking with the ability to multi-task
• Ability to quickly grasp and apply new information
• Can effectively handle complex assignments
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Electrical or Computer Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 5 years of relevant experience; or Master's Degree with a minimum of 3 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9568
Job Location: Fairfax, VA
Input Date: 09/09/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Facility Construction Project Manager (Aerospace)

Description:
PDS Tech is seeking a Facility Construction Project Manager in Windsor Locks, CT
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.
The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

 
 
The candidate must work well with all functional groups and have good communications skills at all levels are required. 
Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.
Projects range from small single tasks to larger scale construction projects including:
  • Facility Upgrades,
  • Facility Renovations,
  • Special Projects, and
  • Managing Equipment Installation.

 The candidate will:

  • assist in the selection and contracting process of consultants and construction teams as necessary for each project,
  • provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
  • gain intimate knowledge of processes and
  • manage capital projects on time and within budget

Education:

  • Bachelors.

 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jyoQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Construction Project Manager (Aerospace)

Description:
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.

The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

The candidate must work well with all functional groups and have good communications skills at all levels are required.

Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.

Projects range from small single tasks to larger scale construction projects including:
• Facility Upgrades,
• Facility Renovations,
• Special Projects, and
• Managing Equipment Installation.

The candidate will:
• assist in the selection and contracting process of consultants and construction teams as necessary for each project,
• provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
• gain intimate knowledge of processes and
• manage capital projects on time and within budget
 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Fill & FairAssociate

Description:
Chipton-Ross is seeking a Fill & Fair Associate for an opportunity in Cypress, CA

RESPONSIBILITIES:
Prepare aircraft interior parts for decorative material application by filling and fairing plastic, metal, and composite parts and units using filling material.
" Adhere to company specifications, work instructions, engineering prints, and work orders.
" Document the materials used in the process to maintain traceability.
" Clean panels in preparation for filling and fairing.
" Mix and apply filling material to aircraft interior parts.
" Fair parts after application and drying of filler.

REQUIRED EXPERIENCE:
" 1-3 years of experience in comparable role
" Must be able to read and speak English
" Previous experience in aerospace, manufacturing or automotive painting is preferred

Preferred Qualifications:
" Ability to read and interpret drawings and blueprints preferred
" Previous experience in Aerospace Manufacturing preferred
" Ability to understand and communicate in English (speak, read and write) at a level necessary for successful job performance

Position Criteria:
" Demonstrated ability in mixing and applying bondo, and subsequent inspection and sanding
" The ability to read and write at a level necessary for successful job performance
" Ability to work in a team environment; amicable

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time
2nd shift 5:00pm-1:35am
M-F + occasional voluntary Saturday + Daily OT

 
Job Number: 180312
Job Location: Cypress, CA
Rate: $DOE
Input Date: 07/11/2019
Last Updated: 10/21/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
First Article Quality Engineer

Description:
*This is a full time, 6 month, contract position located in Lansdale, PA*



We are looking for a quality engineer involved in First Article Inspections, who will create, maintain and develop Government Standard quality procedures for our aerospace production line. The applicant will be working on processes that affect our finished composite products using methods such as inspection, testing, and evaluating accuracy and precision of products (actual vs specification analysis) coming off production the line.



The daily duties will entail completing and reviewing of applicable forms to ensure compliance to AS9100 / 9102 standards. The applicant will be utilizing quality tools to help continuous improvement. Candidate will ensure our quality systems are implemented to meet Government contract specifications.



Required:
*2+ years’ experience performing quality engineering /quality assurance for AS9100/9102 aerospace production lines.
*Experience with first article inspection, reviewing of test data, corrective action, conducting audits.

*Able to gain a security clearance upon starting: US Citizens only may apply.

*4 year degree



Pluses:
* PPV Experience

*LEAN or Six Sigma knowledge or certification
* System auditing experience to AS9100C
*Performing source inspections and developing inspection strategies for complex mechanical parts and accessories
 
Job Number: 140
Job Location: York, PA
Rate: $32.55
Per Diem: yes split
Input Date: 09/09/2019
Last Updated: 09/27/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Flight Control Engineer

Description:
We are currently seeking a for an experienced Flight Control Engineer to fill an opening for an aerospace company located in Renton, WA. Interested candidates should have experience with Verification and Validation as well as aircraft level requirements for flight controls systems.

Responsibilities of the Flight Control Engineer

System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test and aircraft/system qualification and certification.
Author flight test and ground test specifications for Flight Controls Systems.
Analyze test data and evaluate system operation.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Prepare test reports.
Evaluate requirements for traceability, correctness, and completeness.
Provide analysis and input as required to verify compliance with ARP4754A and DO178C.
Initiate and validate improvements to the design and documentation of the Flight Control System
Ensure all schedule and cost objectives are meet as described.


Requirements

Bachelor, Master or Doctorate of Science degree in Engineering, Computer Science, Mathematics, Physics Or Chemistry.
7 plus years of experience with flight controls in terms of both software and hardware.
Excellent communication skills both written and verbal.
Expert knowledge of ARP 4754 and DO178C.
DER, UM, DAD Certification active or previous is highly preferred.
 
Job Location: Renton, WA
Input Date: 10/18/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System (ATA27) Safety Engineer

Description:
We are seeking an experienced System Safety Engineer with a Flight Control Systems background. Interested candidates should have at minimum 5 years of safety assessment experience as well as previous flight control experience.

Responsibilities of the Flight Control System (ATA27) Safety Engineer

To develop and finalize aircraft T/C design to be compliant to all applicable regulatory requirements and produce necessary documents.
Perform all System Safety Assessments on Flight Control Systems.
Create SFHA/SSA/CMA for related systems.
Work on scheduling to resolve problems and mitigate risk.

Requirements of the Flight Control System (ATA27) Safety Engineer

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of experience with safety assessment in flight controls (ATA27)
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Flight Control System Integration Engineer

Description:
In this role you will work and lead activities of Pilot Control System (PCS) as part of Secondary Flight Control System. This will include interfacing with all other aircraft functions and engineering team members to coordinate and obtain the approval of any task assigned contributing to the aircraft ‘Flight Control System’ Development and Certification.

Scope of Work:
1)     PCS System Engineer will work as a team member of Flight Control System Design Group - Secondary Flight Controls IPT.
2)     Basic work scope is to develop and finalize aircraft T/C design, compliant to all applicable Requirements, under company schedule. This activity includes:
i)       Evaluating the current aircraft design, with respect to compliance to the Flight Controls System/PCS related airworthiness regulations of JCAB, FAA and EASA.
ii)      Lead the technical direction with design authority for all integration and development requirements.
iii)     Coordinating integration of design change activities originated from Flight Controls System/PCS requirements when required.
iv)    Oversight on design solutions engineered through requirements based management, complying with CFR 14 Part25, ARP4754A, DO178b, DO254, etc.
v)     Support discussions and presentation of Flight Controls System Compliance with the Regulatory Authorities.
vi)    Executing the requirements of the Type Certification Plan for ATA 27 Flight Controls. 
vii)   Reporting on work status and progress through regular technical and program governance to upper management.
viii)  Execute the plan, schedule and priorities directed by IPT and upper management. Where deviation to plans exists, proposed alternative methods or recovery plans to secure program objectives. 
ix)    Responsible to ensure Flight Controls System/PCS schedule is complete, correct, updated and meet program objectives/milestones.
x)     Responsible for Flight Controls System/PCS deliverables are released under program dates. Coordinate with other areas as required.
xi)    Support other ATAs, IPTs and Departments (Customer Support, Flight Test, RIGS etc.) in relation to ATA27 dependencies to ensure they meet program milestones.
xii)   Responsible for technical requirements integration with applicable Flight Controls System/PCS suppliers and other interfacing suppliers as appropriate.
xiii)  Provide leadership and expertise to assist in resolving the Flight Control System Design Group performance during any rig testing or flight testing.
3)     All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.

The primary work location will be in Nagoya, Japan. However, engineers maybe requested to travel or relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. 
Basic Qualifications
​- Working experience in commercial aerospace
​-10 or more years of experience as Compliance Engineer for Flight Controls System
​-Good communication skills in English


 
 
Job Number: 1910106041
Job Location: Nagoya,
Duration: 24 months
Input Date: 09/04/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYy7QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.

Requirements of the Flight Control Systems Engineer

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 10/18/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.


Requirements

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.


Requirements

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Input Date: 10/18/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: Mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 10/15/2019
Last Updated: 10/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer w/Secret Clearance

Description:
*We have a full time, 1 year contract position, located in Palmdale, CA*



We are hiring for a contract flight controls engineer who will be working with airborne vehicle systems in the areas of GNC, Vehicle Management Systems, Control Law Design, flight simulation, telemetry, avionics and instrumentation systems for rockets and booster rockets.



Required:

*15+ years’ experience working as a Flight Controls and Simulations Engineer working at an aerospace firm or subcontractor.

*Good skills in C/C++ and embedded software

*Strong background in GNC and Vehicle Management System (VMS) development, lifecycle, or architecture

*Knowledgeable in Control Law (CLAW) Design and Development

*MATLAB (Simulink)

*BSEE or equivalent degree

*Active Secret clearance (w/recent investigation)
 
Job Number: 362
Job Location: Palmdale, CA
Rate: $80.00
Per Diem: yes split
Duration: 1 year or more
Input Date: 08/09/2019
Last Updated: 09/27/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support. They require a Flight Controls Systems Engineer with extensive systems safety experience. 

This is an exciting opportunity to work in East Asia, contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitably skilled and qualified candidates.

Responsibilities:

The selected candidate will take charge of FCS system assessment for a new aircraft project / program.
They will be tasked with Improving the FCS department's capability for system safety assessments.

Skills/ Qualifications / Experience Sought:

Background working for Aerospace Companies in similar roles.

Degree Qualified.
More than 5-year experience on FCS safety assessment is required.
Fluent in English language with good communication skills.

Team Player.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.
 
Job Number: BH-52-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Flight Operation Office Strategy Group Lead

Description:
Support smooth delivery to customers (Airlines) for the development phase and the mass production phase of aircraft.

Development and implementation of training for the person (Flight crews, Mechanics, Cabin Crews, Dispatchers, etc.) required for the operation of the aircraft.

Coordinate with domestic and overseas Aviation authorities and our customers. Support customers to start commercial operations and the operations thereafter of aircraft.
 
Business Outlines
Global strategic plans and implementation of the plans for business development not 
only in Japan but also overseas.
Responsibilities;
(1) Prepare Short-, Medium- and Long-Term Plans
(2) Coordinate with related parties (Aviation authorities and customers)
(3) Coordinate with Aviation authorities and customers about the development of 
training, etc.
(4) Support required training after our customers start commercial operations.

Expected Education / Experience:
 
l  Required:
 
-      Working experience in commercial aerospace for an Original Equipment Manufacturer (OEM);
-      10 or more years of experience related to Flight Operations Training, including development and delivery processes;
-      Good communication skills with airline customers, training providers, suppliers, and aviation authorities.
 
l  Preferred:
 
-      Knowledge in aircraft development and certification processes;
-      Working experience in the aviation customer support industry;
-      Working experience with suppliers/ providers negotiation;
-      Working experience with aviation training centers operation;
-      Working experience with aviation training providers management;
-      Ability to coordinate with various kinds of in/out-company stakeholders;
-      Communication and negotiation skill;
-      Team management skill.

 
 
Job Number: 1910104842
Job Location: Nagoya,
Duration: 24 months
Input Date: 08/02/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUxwQAG&URLSource=cjhunter

Flight Operations Training Support Group Lead

Description:
The “Flight Operations Training Support” Global Lead is responsible to coordinate and integrate all processes, requirements and customer requests related to flight operations training (pilots, flight attendants, and flight dispatchers) in order to ensure high levels of readiness of customer’s personnel for the program entry into service. Such scope of work consists of the following activities:
 
l  To coordinate and integrate all stakeholders responsible for each portion of the flight operations training system (pilots, flight attendants, and flight dispatchers) development process, including, but not limited to:
 
Ø  Flight Operations Training;
Ø  Training Provider;
Ø  Aviation Authorities;
Ø  Flight Operations Engineering and Pilots;
Ø  Flight Operations Publications;
Ø  Suppliers Contracts Management;
Ø  Customers Contracts Management;
Ø  Certification / Operational Evaluation;
Ø  Program management.
 
l  To ensure that the flight operations training system (pilots, flight attendants, and flight dispatchers) is timely developed (in accordance to the program Master Phase Plan) to achieve a robust program entry into service, with high levels of readiness and robustness for the following scope (but not limited to):
 
Ø  Training Needs Analysis (TNA);
Ø  Training Program and Syllabi;
Ø  Courseware (presentations, training manuals, CBT, etc.);
Ø  Human Resources (GSI, SFI, TRE, etc.);
Ø  Training Devices (FFS, CPT, etc.);
Ø  Training Infrastructure (classrooms, briefing/debriefing rooms, etc.).
 
l  To ensure that the flight operations training system (pilots, flight attendants, and flight dispatchers) is timely approved/ certified by the pertinent aviation authorities for the program entry into service.
 
l  To ensure that customers personnel are timely trained for a smooth program entry into service, with high levels of availability for the following training resources (but not limited to):
 
Ø  Training Devices (FFS, CPT, etc.);
Ø  Human Resources (GSI, SFI, TRE, etc.);
Ø  Courseware (presentations, training manuals, CBT, etc.);
Ø  Training Infrastructure (classrooms, briefing/debriefing rooms, etc.).
 
 
The primary work location will be Nagoya, Japan. Multiple domestic and international trips will be required.
 

Expected Education / Experience:
 
l  Requirements:
 
-      Working experience in commercial aerospace for an Original Equipment Manufacturer (OEM);
-      10 or more years of experience related to Flight Operations Training, including development and delivery processes;
-      Good communication skills with airline customers, training providers, suppliers, and aviation authorities.
 
l  Preferred:
 
-      Knowledge in aircraft development and certification processes;
-      Working experience in the aviation customer support industry;
-      Working experience on suppliers/ providers negotiation;
-      Working experience on aviation training centers operation;
-      Working experience on aviation training providers management;
-      Ability to coordinate with various kind of in/out-company stakeholders;
-      Communication and negotiation skill;
-      Team management skill.


 
 
Job Number: 1910104841
Job Location: Nagoya,
Duration: 24 months
Input Date: 08/02/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUxrQAG&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Fuel System Engineer responsible for the design of the Fuel System and related system integration. This includes requirements definition, specification and ICD creation, Supplier coordination, test execution, drawing creation, product certification, product improvement, and field support. Ability (or interest) to conduct fuel system performance analysis using 1-D fluid flow simulation software (i.e. Flowmaster, AMESim or similar analytical tools) is highly desired, but not required.

Duties and Responsibilities:
• Communicates effectively in both verbal and written format. Candidate should be able to adjust communication content and approach based on audience
• Manages task execution to ensure on-time and on-target completion
• Searches for problem root cause and develop corrective action plans and solutions
• The primary role of this position within the team will be as a general fuel system engineer. Specifically, this will entail:
o Support fuel system production and field issues with troubleshooting.
o Implement design improvements to the current fuel system design.
o Interface with current fuel system suppliers to manage supplier changes
o Participate in testing including supplier qualification testing, and flight testing
o Able to manage the certification aspects of major and minor changes including test plans, test reports and analysis reports that will be submitted to the FAA
• An additional role for this position within the team will be as a fuel system performance analyst; is desirable to find a candidate that has proficiency or interest in performing this analysis, but not a required skill. If interested, this role will entail
o Modeling the fuel system using a 1-D fluid flow simulation software such as AMESim or Flowmaster
o Performing performance assessments of the fuel system including tank filling performance, fuel distribution and supply performance, vent system performance, unusable fuel simulations, negative acceleration simulations and other system performance simulations
o Comparing analysis results to flight test data
o Evaluating performance impact of proposed design changes
o Writing reports documenting analysis results
• Additional roles within the team may be available at different program phases

Education, Work Experience, Certification and/or Licensure:
• BS in Engineering with 5 or more years directly related experience or MS in engineering with 3 or more years of experience
• Previous aerospace experience at either Supplier or OEM
• Some Travel will be required


Knowledge, Skills and Abilities:
• Familiar with industry documentation for design, test, and certification of propulsion systems
• Proficient in Microsoft Office Products.
• Familiar with FAR Part 23 or Part 25.
• Familiar with Industry standards such including DO-160, MIL-HDBKs and SAE ARPs.




The Structures Company is an AA/EOE.
 
Job Number: 297
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/09/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Functional Safety Engineer

Description:
PDS Tech, Inc. is seeking a Functional Safety Engineer in Auburn Hills, MI.

Summary:

  • The Automated Driver Assistance System Safety Engineer will be involved with the development of the future semi and fully automated driver assistance systems and enablers, this may also include enhancements to existing driving assistance systems such as Adaptive Cruise Control, Forward Collision Warning, Lane Keep Assist and Blind Spot Monitor or future electrical architectures to support more advance systems.
  • The Engineer is responsible for performing functional safety analyses and executing related tasks for FCA automated vehicles.
  • This includes performing vehicle and system level hardware and software analysis to identify potential safety impacts, developing safety requirements and supporting other activities in accordance with the FCA Functional Safety Engineering Process.  
  • Some of the specific activities development of Automotive Safety Integrity Level (ASIL) for features via hazard analysis, safety plans, safety cases, and other ISO 26262 work products. In addition, the engineer will interface with other vehicle teams and suppliers.
  • The candidate must have the desire to learn new processes and technologies.

Summary of Position Responsibilities include by not limited to:


  • Perform, support and/or manage the execution of System Safety tasks,


  1. Safety concept and safety program plan.
  2. Safety requirements and traceability.
  3. Support validation and verification team in DVP development and execution.
  4. Safety case development.


  • Participate in design discussions to ensure that the safety requirements are implemented and adequate.
  • Support design activities, CCA/CCM/DFMEA.
  • Support both in house and supplier lead development.
  • Support product development as member of cross functional team.
  • Review supplier functional safety deliverables to assure FCA requirements are supported.
  • Participated or Lead safety reviews of functional safety process work products.
  • Coach engineering teams on functional safety process.
  • Teach classes to FCA employees on functional safety process and analysis.
  • Actively participate in functional safety workgroups, as assigned, to support development or improvement in processes.

Prerequisites:


  • Bachelor of Science degree in Applied Physics, Mechanical, Electrical, Aerospace, or Computer Engineering, or related Engineering field from an ABET accredited university accredited university.
  • 5 years of related engineering experience.
  • 2 years within the area of functional safety.
  • Proven ability to apply the V-model development process.
  • Competency in Systems Engineering – Active Controls, Communications Protocols.
  • Understanding of automotive vehicle systems.
  • Proven competency in Functional Safety and/or System Safety.
  • Trained in both DVP&R and DFMEA creation and execution.
  • Good problem solving, communication, and interpersonal skills.

Preferred Requirements:

  • Master’s degree in Applied Physics, Mechanical, Electrical, Aerospace, or Computer Engineering, or related Engineering field from an ABET accredited university.
  • Understanding of Safety of the Intended function (SOTIF).
  • Trained and certified in ISO26262.
  • Experience in Fault Tree.

      


 
 
Job Number: 1910103748
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 07/11/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GRMXQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Engineer

Description:
Summary
As the Human Factors Engineer you will report directly to the Flight Deck Manager and will be responsible for the technical aspects of the Human Machine Interface (HMI) design, integration and testing of the flight deck for the business jet.

On any given day you might:
• Develop the HMI design and architecture of the Flight Deck
• Integrate the Flight Deck design with the interior supplier, Flight Controls IPT and the Avionics IPT
• Develop product plans that include certification plans
• Provide subject matter expert level technical leadership, mentoring, and guidance on both practical and theoretical aspects of HMI engineering
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the Flight Deck mock-up
• Assist in the creation of the Flight Deck Simulator
• Ensure compliance with regulations and customer requirements interact directly with suppliers
• Define requirements and processes
• Validate and verify of requirements
• System test and certification
• Report Status
• Provide expert level guidance on both practical and theoretical aspects of the Flight Deck design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• Good understanding of Systems Engineering
• Good understanding of anthropometrics, pilot psychology, Pilot workload and flight deck equipment interactions
• Demonstrated success developing processes
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 60494, Mil-STD 1472 and other relevant industry standards is preferred.

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-032
Job Location: Reno, NV
Rate: $62.50-$100
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

Industrial Engineer (DOD Secret Clearance)

Description:
PDS Tech is seeking an Industrial Engineer with DOD Clearance in Clearfield, UT
 
This candidate will manage schedules and assembly and have Aerospace assembly experience. 
 
**Candidate must have active secret clearance with last investigation within the last 4.5 years.
 
Candidate will have to obtain SAP Clearance.
 
Top three skills:
  • Shop operating plans
  • Standard hour development/application
  • Capacity/staffing forecasting

 
Job Duties:

  • Industrial Engineering accountability will include, but not be limited to the following:

    • Manufacturing capacity analysis
    • Positional tooling and machine requirements
    • Work measurement / time standards development
    • Production performance metrics and analysis
    • Special studies and projects
    • Staffing models
    • Production readiness assessments
    • Recovery planning
    • Facilities and workplace design
    • Lean Implementation
    • Simulations


Requirements & Qualifications:
  • Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
  • In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
  • Ability to provide and implement technical solutions to advanced problems which require ingenuity and innovation
  • Capable of working with minimal direction, independently determines and develops technical objectives of assignments, and presents work upon completion for high level review
  • Occasionally acts as a leader and understands that erroneous decisions on their part will result in probable delay and failure of organizational objectives
  • Represents the organization as a technical contact, interacts with senior personnel on important technical matters, and helps with coordination between organization
  • Experience implementing Toyota Production System practices (lean) in a production and/or

    business environment

 
Competencies for Success:

  • Ability to work with minimal direction in a dynamic fast paced, changing environment
  • Strong interpersonal skills with ability to interface with an organization at all levels
  • Excellent problem-solving skills
  • Able to deal effectively with stress and conflict
  • Initiative, highly motivated self-starter, adaptable, and high motivation for excellence
  • Ability to multitask and prioritize
  • Excellent organizational and multi-tasking skills
  • Strong attention to detail
  • High energy, results oriented, self-reliant, team player
  • Demonstrated work ethic

 
ACTIVE DOD CLEARANCE
 
Job Number: 1910103063
Job Location: Clearfield, UT
Duration: 4 months
Input Date: 08/14/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jy0QAA&URLSource=cjhunter

Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/18/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert - Aerospace - China

Description:
Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai. 

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BH-70-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 07/18/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Information Systems Security & Privacy Administrator

Description:
Job Title:   Information System Security & Privacy Administrator
Job Type:  Full Time/Direct Hire + benefits
Location:  Irving, TX


PDS

PDS Tech provides flexible, high-value contingent staffing and SOW solutions to corporate leaders in a variety of fields, from aerospace and defense to machinery, communications, energy, technology, and service industries.
PDS Tech has recently joined the AKKA Group. AKKA is an international leader listed on the Euronext stock exchange and provides engineering consulting and R&D services for clients in the field of the automotive, aerospace and rail sectors including life sciences, telecommunications, energy and defense.

The Information System Security & Privacy Administrator is a "hands-on" position is responsible for maintaining the overall security and privacy posture of the PDS Tech Information Systems and Implementing its Risk Management Framework.

PRIMARY DUTIES
  • Works with members of IT Team and Business Leaders to assure the proper implementation, monitoring and response reporting of the Information Security Plan.
  • Translate Security Policies into actionable plans to protect PDS Tech resources.
  • Educate the organization and coordinate training in Security Standards, Policies and best practices to prevent cyber- attacks and security compromises.
  • Maintain and Exercise the Security Incident Response Plan.
  • Manage vulnerability by performing vulnerability tests and/or monitoring and responding to vulnerability tests performed by outside vendors.
  • Stay up-to-date on various threats and trends affecting Cyber Security.
  • Develop and perform various security monitoring tasks to verify the integrity of our network and system security.
  • Be accountable for periodic testing and auditing of our security compliance.
  • Coordinate Security Vulnerability mitigation
  • Works with Policy Makers, Legal Department, IT Team and Web Developers to monitor GDPR and CCPA compliance on public facing and internal systems.
  • Translates Privacy Policies into Actionable Plans.
  • Educate organization on Privacy Policies and Adherence.
  • Coordinate Privacy Compliance Vulnerability mitigation.

NECESSARY QUALIFICATIONS
  • At least 5 years of demonstrated experience in some of the enterprise security functions such as, Security Compliance framework, Identity & Access Management, Cloud Security, Vulnerability Management, Firewalls, Antivirus, Penetration testing and other related functions
  • Strong knowledge of information systems security components and best practices including: firewalls, intrusion detection systems, anti-virus software, data encryption, and other industry-standard techniques and practices
  • Knowledge of industry standard best practices with regards to security
  • Working knowledge of Microsoft Active Directory, Microsoft Windows Operating Systems and Microsoft Exchange, Windows 10, Office 365 (Advanced Information Protection, Threat Intelligence and Advanced Security)
  • Excellent verbal and written communications
  • Familiarity in implementing Defense System Services (DSS) Electronic Control Policies (ECP) and the DSS Authorization Process Manual (DAAPM)
  • United States Citizen

Active or Ability to obtain Security Clearance

 
 
Job Number: 1910105137
Job Location: Irving, TX
Duration: 12 months
Input Date: 08/09/2019
Last Updated: 10/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stacy Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVoOQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intelligent Manufacturing Expert - Aerospace - China

Description:
Intelligent Manufacturing Expert - Aerospace - China

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Intelligent Manufacturing Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai. 

Job Description

·Responsible for digitalizational intelligent manufacturing application planning, AI algorighm development, system testing, debugging, maintaining, technical guidance etc.;

·Analyze the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

·Responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle;

·Follow up the project progress in time, lead the team to solve the problems that related to site production line, ensure the project is completed on time;

·Responsible for intelligent manufacturing information management and programing.

Qualifications & Experience

·More than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development;

·Familiar with R&D, production, management process in the aeronautical field;

·Familiar with organizational intelligent manufacturing related to equipmental software, hardware technology and organaitional information management software;

·Proficiently program the equipment control system of intelligent manufacturing;

·Lead organization intelligent manufacturing, experienced in intelligent manufacturing and industry robot are preferred;

·Familiar with information system or software development, programmer who are experienced in programming and software developing are preferred;

·Overseas working experience is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BH-69-2
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 07/18/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Junior Software Engineer DevOps

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Junior Software Engineer DevOps
(US Citizenship Required*)
Scottsdale, AZ
2019-9543
Responsibilities:
• Develop embedded software solutions in a continuous integration/continuous development environment (DEVOPS) in a open source tool chain environment
• Collaborate with a small team of other passionate developers
• Challenge old ways of solving problems and manage risk through rapid prototyping and learning
• Imagine new ways of providing capability quickly
• Demonstrate new capability to customers and rapidly adapt solutions to be the first to meet their future needs

Qualifications:
• Ability to obtain a Department of Defense Secret Security Clearance at time of hire.
• Agile Development Methodologies, specifically Scaled Agile Framework (SAFe)
• C/C++ code development, integration and test
• JAVA code development, integration and test
• Subsystem integration and test
• Cloud environments, technologies, and applications
• Seasoned passionate professional committed to learning new skills, technology and other ways of solving problems.
• Capable of operating in the rapid pace of a DEVOPS environment and committed to success.
• Proficient in multiple languages, in particular C, C++, Python and desirably MATLAB.
• Proficient with embedded Linux.
• Experience with buildroot, gitlab, doxygen, tensorflow, libfuzzer, git, googletest, lttng, gnurdio, docker, kubernetes, and/or jenkins a plus. Someone who stays current and experiments with development trends and open source.
• Preferred- Knowledge of Army operations, doctrine and tactics is a plus.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Software Engineering or a related technical field is required (or equivalent experience), combined with a minimum of 2 years of relevant experience; or Master's Degree.
• Agile experience preferred
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
Join a team that values your experience!
 
Job Number: 2019-9543
Job Location: Scottsdale, AZ
Input Date: 09/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer

Description:
This is a full time, 15 month contract, located in Colorado Springs*
*Requires an Active Secret Clearance*



We are hiring for a Logistics Engineer who will be working on Secret projects within the aerospace field. The candidate will be expected to work with site personnel to develop and maintain effective and efficient logistic support programs.



Daily duties will entail conducting regular inventory audit/checks, manage Government furnished equipment (GFE) checks, create shipping documents (DD 1149), work with shipping databases, manage facility test equipment and maintain calibration schedules, conducting System Safety and EHS Assessments, including equipment modifications to ensure meet safety requirements (typically UL compliance), work with Safety Data Sheets for hazardous materials.



Required:
*5 years’ experience in Logistics or similar engineering at a Government or subcontractor site.
*Experience with Government GFE checks and forms such as DD 1149
*Good EHS and System Safety knowledge and experience including Safety Data sheets.
*Knowledge of ILS Processes to support maintaining the ILS Depot Operations Manual
*Active Secret Clearance; Only US Citizens please

*Engineering degree preferred
 
Job Number: 900
Job Location: Colorado Springs, CO
Rate: DOE
Per Diem: yes split
Input Date: 09/09/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Fort Worth, TX
Rate: $39.41/HR
Duration: 1 year contract
Shift: Must be able to work evenings and flexible hours

****MUST be a U.S. Citizen****

Job Description:
1. A position within the Export & Dangerous Goods Control Team supporting an aerospace production and global sustainment enterprise.
2. Primary tasks to include providing dangerous goods packaging instructions, compliance inspections and execution of required certifications for all modes of transportation.
3. Responsibilities include interfacing with multiple internal departmental contacts across our client as well as freight forwarders, personnel stationed at various air force bases, international partners, and local country nationals.
4. Must be able to interpret and apply legal regulations for Air (IATA/ICAO), land (49 CFR), and sea (IMDG) to products offered for shipment to domestic and international locations, some of which require multiple modes of transport.
5. Must be able to communicate effectively with personnel from multiple internal business areas to explain requirements and obtain additional information regarding offered products.
6. Must continuously monitor regulations and work with department leaders to maintain current requirements for dangerous goods packaging and shipping.
7. Must possess strong organizational skills and maintain all records and counts for time period required by external regulations and internal policies.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. MS Office experience required.
3. SAP experience preferred.
 
Job Number: 11208
Job Location: Fort Worth, TX
Rate: $39.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 07/23/2019
Last Updated: 10/11/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 09/03/2019
Last Updated: 10/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MATERIAL & PROCESS ENGINEER

Description:
Role: : MATERIAL & PROCESS ENGINEER
Location: Centennial, CO
Duration: 10 months’ contract

Job Description:
This contract labor position is for a mid-level to highly experienced Avionics Parts, Material and Processes (PMP) engineer, with responsibilities to include the following:
- Serve as team member within the Avionics PMP Group - ensuring that PMP review, testing and procurement meet project schedule and budget
- Provide Avionics PMP support to Avionics hardware including EEE piece parts, electrical circuit boards, electrical connectors, electrical box assemblies, batteries, and wire harnessing
- Coordinate with designers to ensure proper PMP selection on heritage and major development programs
- Review drawing packages for material and process selection and compatibility with electrical parts
- Evaluate and approve Part Approval Requests (PAR) using physics of failure based reliability principles, including assignment of suitability for the application, and the intended mission profile environment
- Interface with Avionics suppliers in support of Hardware Design, Manufacturing Processes Reviews, Build Instruction Reviews, and Build Anomaly Reviews
- May require up to 20% travel

Position Requirements:
• Bachelor of Science degree in Material Science, Electrical Engineering, Physics, or similar applied science or engineering fields
• Current or previous experience with Aerospace Avionics Parts, Material and Processes including electrical piece parts, wire harnesses, and top assembly boxes
• 10+ years of experience
• Demonstrated experience in the resolution of complex part, material, and process anomalies
• Working knowledge of Military and Commercial parts, materials, and process specifications
• Experience working independently and in a team environment
• Experience with Microsoft Office
• Strong communication skills (verbal and written, including presentation skills)
• Ability to travel when needed
 
Job Number: 19-06183
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 10 months
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 09/06/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 09/30/2019
Last Updated: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: Ocala, FL
Duration: 6 months

Description:
Manufacturing engineering support for automated circuit card assembly commodity department (Surface Mount Technology, Plated Through Hole, Conformal Coating).
Daily responsibilities include support of automated manufacturing equipment and assembly operators, non-conformance rework disposition, investigation and implementation of new automated manufacturing equipment, root cause and corrective action for manufacturing defects, application of lean manufacturing techniques to reduce cost and increase yields, and provide assembly tooling support.

Skill/Experience/Education
Mandatory
Experience with circuit card assembly and electronics manufacturing. Second shift work schedule with flexible start time may be required for this position. Knowledge of Lean manufacturing concepts and techniques. This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen. Bachelor’s degree or higher from an accredited college in Mechanical or Aerospace Engineering, or in a related discipline.

Desired
Experience with automated manufacturing equipment.
Leadership experience.
Pro-E/Creo, or equivalent CAD software, tool design, electronic, packaging design.
Experience with SAP manufacturing planning system.


Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years
Work Instruction Development Development of manufacturing work instructions for CCA manufacturing 2 0-3 Years
Mandatory(Yes/No) Yes
Hardware Process Development Electronics manufacturing and/or automation 3 0-3 Years
Mandatory(Yes/No) Yes
Direct Production Support Provide direction and training to hourly assemblers 3 0-3 Years
Mandatory(Yes/No) Yes
 
Job Number: 19-11512
Job Location: Troy, MI
Input Date: 08/20/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Position Purpose:
• Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Aerospace interior experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Entry level position.

Principle Duties and Responsibilities:
• Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Work on special projects.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.

Other Requirements:
• Basic knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-367
Job Location: Savannah, GA
Rate: $40/hr
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/16/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Location: Savannah, GA
Rate: $40.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
1. Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Perform productibility studies from engineering drawings.
5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
6. Incorporate Lean Manufacturing Methodology into existing and future processes.
7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
8. Support all Safety, Sustainability and Ergonomic Initiatives.
9. Aid in development and maintenance of Business Continuity Plan.
10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
11. Author DRDI/DMT rework instructions to support effective corrective actions.
12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.

Additional Functions:
1. Work on special projects.
2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
3. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
4. Perform other duties as assigned.

Other Requirements:
1. Basic knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Specialist certification or higher preferred.
 
Job Number: 11351
Job Location: Savannah, GA
Rate: $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 08/16/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Position Purpose:
• Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Aerospace interior experience is a plus.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.

Principle Duties and Responsibilities:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Ensure quality policies are being practiced; make recommendations to improve quality.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 24-368
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/20/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
7. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
8. Keep current on state-of-the-art manufacturing developments.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. Develop business case and present to management for process improvement approval.
11. Assume the duties of the ME Group Head in his/her absence.
12. Assign and review work of subordinate personnel.
13. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
14. Lead/coordinate the implementation of projects between multiple orgs.
15. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
16. Support all Safety, Sustainability and Ergonomic Initiatives.
17. Author DRDI/DMT rework instructions to support effective corrective actions.
18. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
19. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 11370
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 08/20/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer – Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: Level 3 = $40.00 - $48.00/HR
Level 4 = $50.00 - $61.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

** The Hiring Manager is looking for candidates who have significant experience supporting machining and welding operations **

** Onsite interviews required **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.

Education:
Level 3: Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Level 4: Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 11085
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 09/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Process Engineer

Description:
Nesco is assisting a growing aerospace company in the Old Saybrook area with finding a Manufacturing Process Engineer. This is a great opportunity for an experience aerospace engineer to work for a close knit company with room for advancement. Salary is 65-90k DOE First and second shift available

  • Aerospace experience required

  • Experience with machining, specially CNC preferred

  • Knowledge of outside processing including heat treating and coating preferred

  • ERP experience and Lean training preferred

    • Create work instructions for processing and outside services

    • Work hands on with production team

    • Support cost reduction initiatives

    • Design tolling and work holding

    • Order raw material and transfer from India

    • Create process routers and BOMs

    • Create process models and drawings




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-30233
Job Location: chester, CT
Rate: 90000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-07-23 00:00:00.0
Input Date: 07/23/2019
Last Updated: 09/25/2019
Firm Name: NESCO RESOURCE
Attention: Jessica Hughes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Master Planner

Description:
Location: Palmdale, CA
Rate: $48.86/HR
Duration: 8 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation must be completed within the last 5-years****

Job Description:
1. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Required Skills:
1. Microsoft Project and/or Open Plan Experience.
2. Milestones Professional Experience.
3. Proven Planning and Scheduling Expertise.
4. Proposal and Program Execution Experience.
5. Demonstrated Earned Value Management System (EVMS) Experience.
6. DCMA Schedule Metrics/Data Driven Metrics Knowledge.
7. Schedule Risk Analysis SRA experience.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11150
Job Location: Palmdale, CA
Rate: $48.86/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 mos
Input Date: 07/02/2019
Last Updated: 10/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner - Clearance URGENT URGENT CA

Description:
165385
Job Title: Master Planner

Work Site Address: Palmdale, CA 93599
Job Number: 1728-1

Start Date: 7/23/2019
End Date: 3/27/2020
Position Type: Contract

Job Summary:
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.


Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Highly Desired Skills: Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Proposal and Program Execution Experience. Demonstrated Earned Value Management System (EVMS) Experience, DCMA Schedule Metrics/Data Driven Metrics Knowledge and Schedule Risk Analysis SRA experience.

Qty 9 positions needed

Work location Palmdale California.
 
Job Number: JE-1728-1S6
Job Location: Palmdale, CA
Rate: DOE
Per Diem: yes
Duration: 9 months
Input Date: 07/19/2019
Last Updated: 10/03/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner / Microsoft Project and/or Open Plan Experience - Clearance URGENT URGENT CA

Description:
165417
Job Title: Master Planner

Work Site Address: Palmdale, CA 93599
Job Number: 1761-1
Start Date: 7/17/2019
End Date: 3/21/2020
Position Type: Contract

Job Summary:
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Highly Desired Skills:
Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Proposal and Program Execution Experience. Demonstrated Earned Value Management System (EVMS) Experience, DCMA Schedule Metrics/Data Driven Metrics Knowledge and Schedule Risk Analysis SRA experience.

Qty 2 positions needed
 
Job Number: JE-1761-1TS6
Job Location: Palmdale, CA
Rate: DOE
Per Diem: yes
Duration: 9 months
Input Date: 07/18/2019
Last Updated: 10/03/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Material Handler

Description:


RESPONSIBILITIES:
VG is seeking Materials Handler to actively facilitate the movement of materials, consumables, hazardous materials and other inventory items necessary to establish and operate the world's first private spaceline. The materials handler will use our ERP system - Ultramain to perform inventory tracking and movement of material, kitting of materials and consumables for operations, physical inventory, cycle counts, and will ensure the accuracy of all inventory movement activities within the warehouse. An ideal candidate should have work history that demonstrates their ability to successfully work in an environment that requires exceptional attention to detail, the ability to multi-task, have excellent computer skills, and can demonstrate excellent customer service and communication skills in a fast paced manufacturing environment.
Your Mission
o Maintain accurate inventory, perform cycle counting and physical inventory of stock. o Responsible for inbound receiving and inspection activities. Accurately receive all inbound deliveries into ERP system; maintain records of all receipts in compliance with VG requirements.
o Verify all incoming documentation and applicable certifications are correct. For international inbound shipments ensure required customs paperwork is received at the time of receipt, audited and maintained for record. o Resolve issues which cause inbound shipment delays in customs or elsewhere. o For hazardous materials ensure required hazmat or MSDS documentation is correct at the time of receipt for all of the material entering and exiting the facility. Ensure MSDS information is routed correctly to each locations MSDS books. o Perform accurate transactions in ERP system (Ultramain) for issuing, issue returns, disposal for materials to appropriate cost-center or projects as required. o Manage HAZMAT storage.

REQUIRED EXPERIENCE:
o High school diploma or GED equivalent required. o Knowledge of ERP systems, ideally Ultramain MRO maintenance software. Other MRP system experience would be beneficial. o Familiar with office software skills including MS Word, Excel, Access, PowerPoint and Outlook. o Demonstrates a proven record of exceeding customer expectations.

EDUCATION:
High school diploma or GED equivalent required from accredited school.

PREFERRED SKILLS:
o BS or AAS in Material Management, Logistics, or equivalent experience is a plus. o Strong experience with material movement in a high tech manufacturing or operational environment, advanced materials, or aerospace industries. o Understanding of import/export processes including ITAR. o Practical approach/leads by example. Happy to be hands on and demonstrates the ability to work cross-functionally across the organization. o Organized, exceptional attention to detail, and structured approach, with the ability to multi-task as required. o Incredible energy and passion with a resourceful attitude. o Self-motivated. Enjoys work independently. Possesses sound judgment and decision making abilities. o Ability to react to change and thrive in a fast paced start-up environment.

Physical and/or Additional Requirements
o Must be able to work all shifts and available for overtime as well as weekends when needed. o Must be able to stand for extended periods (9 hours min), stoop, bend, and being able to maneuver in tight spaces. o Physically able to handle items weighing up to 40lbs (unassisted). o Must be able to operate a forklift, a manual pallet jack and move loaded skids weighing up to 200lbs.

HOURS: Work Hours: 7am-4:30pm (M-Th) OnFridays 7am-3:30pm - We are anticipating overtime on the off Fridays.
Scheduled work week: 9/80

 
Job Number: 174713
Job Location: Mojave, CA
Rate: Up to $18.00 DOE
Duration: 6 months
Input Date: 04/20/2019
Last Updated: 10/21/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Material Handler I

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 10/21/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials Testing & Process Quality Laboratory Specialist

Description:
The ideal candidate will support, perform and manage testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations as well as lean initiatives within manufacturing operations.

Some local travel will be required to conduct monthly testing at facilities located in Bridgeport CT and Shelton CT. Typically travel is limited to once or twice per month for each offsite location.

The Specialist will be working in the Materials & Process Quality Laboratory. The role will include preparation of metallic and composite samples using basic machining equipment to perform ASTM type testing on raw materials as well as production part samples. Typical analyses performed include testing of chemical processing lines, metallographic testing, composite material testing, metallurgical testing, raw material specimen preparation, fluid testing, and oven and autoclave system accuracy testing.

Basic Qualifications:
• High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical tasks.
• Experience working in a laboratory/manufacturing environment.
• Strong work ethic.
• Comfortable working with computers and the Microsoft suite.
• Strong reading comprehension skills including capability to interpret engineering specifications and test procedures
• Strong communication skills needed to support team-based work environment.
• Strong organizational skills with the ability to manage in a fast-paced environment with competing priorities
• Ability to follow written work instructions required.
• Off-shift work and overtime may be required to support business needs.

Desired skills:
• Knowledge of Basic Chemistry
• Familiarity with oven surveys
• Experience working in a laboratory environment
• Experience performing tests in accordance with ASTM and/or AMS standards
• Experience working in the Aerospace industry or at a NADCAP accredited organization
• Mechanical aptitude
• Familiarity working with basic hand tools
• Experience making composite layups
 
Job Number: 123123123
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 09/05/2019