Job Search Results

188 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 10:55AM Pacific Time by ContractJobHunter. )

Listings 1 - 188

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cert Project Specialist I

Description:
Unique Skills:

Previous experience supporting FAA/Gulfstream ODA certification projects. (For example STC/MRA/TC projects)

Position Purpose:

Under general supervision, performs a variety of engineering tasks associated with ODA (Organization Delegation Authorization), FAA (Federal Aviation Administration), EASA (European Aviation Safety Agency) and/or other FCAA (Foreign Civil Aviation Authorities) certification projects. Primary responsibilities include the gathering, organizing, generating, reviewing and processing of engineering documentation associated with MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), Type Certificate (TC) and/or other regulatory approvals projects.

Principal Duties and Responsibilities:

Essential Functions: 1. Reviews STC/TC/MRA data packages prior to submission to the FAA for completeness and adherence to the established requirements. Makes recommendations to ensure STC/TC/MRA documentation is prepared in accordance with approved procedures. 2. Gathers, organizes, and processes engineering documentation related to STC/TC/MRA projects. 3. Exercises creativity and initiative in processing, handling, and distributing engineering documentation to both internal and external organizations. 4. Participates on work teams to achieve department goals, complete milestones and improve processes. 5. Tracks STC/TC/MRA projects to ensure completion within the required timeframe. 6. Assists FAA Designees in STC/TC/MRA project development, as described by Gulfstream ODA Operations Manual procedures. 7. Develops and broadens skills for competency enhancement and career progression.

Additional Functions: 1. Performs other duties as assigned. 2. Minimum travel required.

Other Requirements: 1. Good working knowledge of MS Office software. 2. Must be familiar with Federal Aviation Administration (FAA) certification processes. 3. Must be familiar with Federal Aviation Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 5. Must have excellent organizational and planning skills.
 
Job Number: 17-680-100081
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alrxa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Specialist I

Description:
Bachelor's with 3 years experience supporting engineering certification projects and/or activities. Under general supervision, performs a variety of engineering tasks associated with ODA (Organization Delegation Authorization), FAA (Federal Aviation Administration), EASA (European Aviation Safety Agency) and/or other FCAA (Foreign Civil Aviation Authorities) certification projects. Primary responsibilities include the gathering, organizing, generating, reviewing and processing of engineering documentation associated with MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), Type Certificate (TC) and/or other regulatory approvals projects.
 
Job Number: 100081
Job Location: Savannah, GA
Rate: 35-44
Per Diem: yes
Overtime: yes
Duration: l-t
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Technical Specialist I

Description:
Certification Project-Tech Spec I

Location: Savannah, GA
Pay Rate: $61/hr - $68/hr
Duration: Long Term Contract
Shift: First
Travel: Yes, minimum travel required

Unique Skills:
-Previous experience supporting FAA/Company ODA certification projects. (For example STC/MRA/TC projects)

Other Requirements:
1. Good working knowledge of MS Office software.
2. Must be familiar with Federal Aviation Administration (FAA) certification processes.
3. Must be familiar with Federal Aviation Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
5. Must have excellent organizational and planning skills.

Position Purpose:
-Under general supervision, performs a variety of engineering tasks associated with ODA (Organization Delegation Authorization), FAA (Federal Aviation Administration), EASA (European Aviation Safety Agency) and/or other FCAA (Foreign Civil Aviation Authorities) certification projects.
-Primary responsibilities include the gathering, organizing, generating, reviewing and processing of engineering documentation associated with MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), Type Certificate (TC) and/or other regulatory approvals projects.

Principal Duties and Responsibilities/Essential Functions:
1. Reviews STC/TC/MRA data packages prior to submission to the FAA for completeness and adherence to the established requirements. Makes recommendations to ensure STC/TC/MRA documentation is prepared in accordance with approved procedures.
2. Gathers, organizes, and processes engineering documentation related to STC/TC/MRA projects.
3. Exercises creativity and initiative in processing, handling, and distributing engineering documentation to both internal and external organizations.
4. Participates on work teams to achieve department goals, complete milestones and improve processes.
5. Tracks STC/TC/MRA projects to ensure completion within the required timeframe.
6. Assists FAA Designees in STC/TC/MRA project development, as described by Company ODA Operations Manual procedures.
7. Develops and broadens skills for competency enhancement and career progression.

Additional Functions:
1. Performs other duties as assigned.
2. Minimum travel required.

Education and Experience Requirements:
-Bachelor degree in Engineering, Business or related field or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Three (3) years experience supporting engineering certification projects and/or activities. See Other Requirements in Job Description.
 
Job Number: 7292
Job Location: Savannah, GA
Rate: $61-$68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Seeking a Design Engineer for an opening in Rancho Cucamonga, CA.

RESPONSIBILITIES:
The Design Engineer will work closely with Design Engineering, Certification, Program Management, Quality Assurance, Manufacturing, and Supply Chain.

-Define and design the product under the responsibility of the Project Engineer/Engineering Manager/Program.
-Can get the functional lead of Design Engineer under the supervision of his/her Manager.
-Be responsible of establishment of the whole definition documentary.

Establish and develop the product definition justification using specific design tools for his/her own work and part of his/her perimeter (CAD, mechanical calculation tools, etc. ...). Some specific tools may be subject specialization of some Design Engineer (eg Tool routing specific cable, ...).
Communicate to the industrialization on time the necessary information to integrate in the ERP.
Keep Updated product definition justification.
Investigate the requests for product evolution overlooked known issues and process these requests (after approval by CCB) Investigate requests changes order for CCB and provide maximum of information. He/she is not within his/her responsibility to approve only the proposed changes.
Ensure the application of quality processes.
Realize all necessary controls to validate his/her work and ensure archiving results (T/Sup, calculations, Mom, etc ...).
Distribute the activity within the functional working group (technical contractor included).
Ensure overlooked his/her hierarchy the delay, technical and cost target.
Be able to propose a monitoring and technical summary.
Propose and generate ideas of design and architecture in offer phase or preliminary conception.
Establish or organize the part and product detailed design in compliance with the specifications and objectives defined.
Ensure the design interface with the rest of IPT and external stakeholders.
Initiate meetings necessary to validate the work. (3d, drawings reviews) Initiate test request. (validation) Track and organize any occasions definition linked to the first steps of the product (FAI monitoring, service return, ...) Maintain in condition and consistency the product definition documentary.
Follow technological developments and support preliminary studies if necessary (evolution products, anticipation of obsolescence and new regulations).
Contribute to update the development schedule Report any drift in objectives to Project Engineer and engineering Manager as well as Industrialization manager.
Participate in Product and or Process FMEA for sub-assemblies.
Contribute to the development of the Justification of product definition and guarantee the quality of its content in accordance with the Project Engineer.
Ask internal or external experts support for any activity outside his/her competence (R&T, internal and external suppliers ...) Apply procedures related to its field.
Participate in progress actions of his/her team, especially design methodology.
Participate in the training of new arrival.
Ensure the back-up (replacement) of a person in his/her department

REQUIRED EXPERIENCE:
Design skills
Tolerance stackup
GD&T
Proven problem solving skills
Proficient with MS Office
Able to multi-task
Proficient with Catia, Autocad
Proficient with DocsVision, Smarteam

Ability to read and review written communication.
Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
Must be able to speak publicly and give presentations.

PHYSICAL DEMANDS:
This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

EDUCATION:
High School Diploma

WORK HOURS:
Full Time
 
Job Number: 162813
Job Location: Rancho Cucamonga, CA
Rate: $85K
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Archbald, PA
Rate: $50.00/HR
Duration: 1+ year contract
Shift: 1st Shift

**MUST be able to obtain a Secret Clearance**

Description
- Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
- Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Skill/Experience/Education
Mandatory:
- 9+ years of experience with Firmware
- 9+ years of experience with Analog/Digital Design
- 4+ years of experience with Power Circuit Design
 
Job Number: 7340
Job Location: Archbald, PA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Archbald, PA
Rate: $50.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be able to obtain a Secret Clearance**

Description
- Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
- Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
- Status of clearance is needed on resume.


Skill/Experience/Education
Mandatory:
- 4+ years of experience with electrical power circuit design, analog/digital design, analysis, and documentation.
- Firmware experience.
- Mentor Graphics experience.
 
Job Number: 7328
Job Location: Archbald, PA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: DOE ($40/hr - $45/hr)
Duration: 6+ month contract
Schedule: 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description
-Electrical design support will be required to support missile electrical architecture trade studies and concept design.
-Overall missile electrical design and particular focus for the control actuation system design is required.
-Candidate may need to work with component suppliers.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Skill/Experience/Education (Mandatory):
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
-Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
-Considered experienced, but still a learner.
 
Job Number: 7136
Job Location: Grand Prairie, TX
Rate: 40-45
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret PA

Description:
Electrical Engineer - Level 3
Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Status of clearance is needed on resume.
Skill/Experience/Education
Mandatory:

Electrical circuit design, analysis, and documentation experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Firmware 0-3 Years Yes
Analog/digital design 4-5 Years Yes
Power circuit design 4-5 Years Yes
Mentor Graphics Experience 4-5 Years No

Special Needs
 
Job Number: DW-1377
Job Location: Archbald, PA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active Secret Clearance with investigation within the past five years CA

Description:
Title: Electrical Engineer
Work Location: Palmdale, CA
Start Date: 02/06/2017
Secret Clearance with investigation within the past five years.

Job Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. The applicant will also perform electrical load analysis and analysis and integration of aircraft generators. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance with specifications.


Mandatory Skills:
Experience performing electrical loads analysis, electrical harness design, and creating wiring drawings for aircraft.
Secret Clearance with investigation within the past five years.


Desired Skills:
Experience with generator analysis and integration.
Experience creating electrical schematics for aircraft.
Experience using electrical harness design tools such as Mentor Graphics Capital Harness.
Experience with CATIA V5

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 6-8 Years Yes
Wiring Harness Installation Install wiring harnesses into vehicles using 3D CAD, preferably CATIA V5 9-10 Years Yes
 
Job Number: DW-0425
Job Location: Palmdale, CA
Rate: 47-70/hr DOE
Duration: 10 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers (Level 2 & 3) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Electrical Engineers for open positions in Melbourne, Florida.

Note: All candidates must have has secret security clearance in the last five years.

Job Duties:

• Researches, develops, designs, and tests electrical components, equipment, systems, and networks
• Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes

Qualifications:

• Strong MS Office skills, strong technical writing abilities, must be willing to relocate to Palmdale in approx. 1-2 years
• Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired
• Experience in support of aerospace electrical subsystem design or test operations
• Level 2: 2 Years’ with Bachelors in Science Electrical Engineering; 0 Years’ with Masters
• Level 3: 5 Years’ with Bachelors in Science Electrical Engineering; 3 Years’ with Masters; 0 Years’ with PhD
• Position requires an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38296
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 4 (Shock/Structural)

Description:
The Engineer 4 candidate will investigate and prepare structure analyses, in particular Shock analyses NAVSEA 3010 procedures, to support ship alterations and equipment installations based on customer requirements. The Engineer will be responsible for developing and reviewing mechanical and structural drawings and providing calculations and analyses that support design requirements. He/she will work independently, explain system characteristics, and provide technical guidance to Junior Engineers and Designers. Travel up to 20% of the time to perform ship checks and surveys. Develops and applies advanced methods, theories, and research techniques in the investigation and solution of complex technical problems. Develops and applies advanced methods, theories, and research techniques in the investigation and solution of complex technical problems. Plans, conducts, and evaluates projects or moderate phases of significant projects, coordinating efforts with engineers and staff. Conducts investigations and tests of advanced complexity. May direct teams in the performance of complex tasking. Performs engineering functions in one or more of the following specialties for marine applications: structural, civil, and or naval. Considered expert in field of specialty.

Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. Lifting and moving of materials not to exceed the guidelines set for one man lift. Possible exposure to fumes and irritants normally encountered in an industrial or shipboard environment. May involve gathering of data while observing machinery or equipment operations
 
Job Number: 001
Job Location: Newport News, VA
Rate: 44.33
Per Diem: possible
Overtime: possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Hunrington Ingalls Industries
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer I / entry level CA

Description:
Job title: Engineer I
Job Number: 158740/11536
Location: San Diego, CA
Compensation: 35-42/hr
Assignment Length: contract

Description:

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Entry level Systems and System Test & Qualification Engineer (ST&Q). This position is located at our Poway, California location, supporting test and evaluation (T&E) and systems engineering activities on GA-ASI aircraft and ground control stations. The candidate will be interested in a fast-paced aviation environment, which still allows for a reasonable work/life balance.

This position is responsible for testing and qualifying performance on unmanned aerial vehicle systems, as well as handling some of the typical roles performed by a Systems Engineer. As a member of this team, the candidate will support various programs from concept design through production aircraft test and qualification efforts. The candidate will create and review system design requirements, participate in software regression testing, develop flight performance scenarios, and pass/ fail criteria in the evaluation of aircraft, ground control stations and support equipment.

DUTIES AND RESPONSIBILITIES

• Entry level candidate will hit the ground running and quickly learn the principles of GA-ASI products and processes
• Perform Test and Evaluation (T&E) activities under minimal supervision; will determine and develop various approaches to achieve T&E goals and help guide the completion of test activities
• Act as a test engineer during SIL, ground, and flight operations; test duties include system level T&E of hardware and software with emphasis placed on resource planning, conducting the required tests, and participating in technical test reviews
• Communicate clearly and in writing all facets of the system test program to include test plans, procedures and reports; may work with government aircrew and also be responsible for conducting pre-flight briefings and post-flight debriefings
• Develop effective approaches to resolving issues; support operation of engineering systems by documenting flight performance and evaluating solutions for improvement
• Troubleshoot and analyze systems in a lab and flight test environment
• Establish metrics for requirements traceability; perform data analysis and make technical presentations as required
• Analysis of interconnect diagrams, engineering drawings, schematics, and software releases
• Take part in a team effort to develop, lab test and qualify payload, ground station, ground support equipment and aircraft subsystems
• May directly track efforts including cost, schedule, manpower resources, maintenance intervals and performance
• May represent the organization in providing solutions to technical issues associated with specific projects
• Maintain the strict confidentiality of sensitive information
• Perform other duties as assigned
• Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company
• Expected to work in a safe manner in accordance with established operating procedures and practices

Job Qualifications

• Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution
• Must have a complete understanding of engineering concepts, aircraft principles, codes, and theory
• Previous flight test engineer with a qualification to perform tests for a military organization including prior Department of Defense (DOD) Developmental Test (DT) or Operational Test (OT) experience is highly desired
• Analysis expertise desired with an emphasis on data collection, ad hoc queries and suitability measures; experience with analysis tools such as MATLAB, LabVIEW, or other similar products
• Previous expertise and working knowledge of the National Airspace System and UAS operating rules and regulations thereof; prior civil flight experience or military aircrew desired
• Must possess the ability to understand new concepts quickly, apply them accurately throughout an evolving environment, organize, schedule, and coordinate work phases and determine the appropriate approach at the task, operational or depot level to provide solutions to a range of complex problems
• Must have excellent communication, computer, documentation, presentation, and interpersonal skills; the ability to work independently and as part of a team; able to perform complex tasks in multiple engineering areas, and lead a team of less experienced professional employees on semi-routine tasks
• Able to work extended hours and travel as required
• Experience as a test conductor, test director, test pilot/navigator or formal leadership of a Combined Test Force (CTF) or Integrated Test Force (ITF) is desired
• Experience with Earned Value Management (EVM) or as a Control Account Manager (CAM) is desired


Qualifications Essential Qualifications

• Typically requires a bachelors degree in engineering or a related technical discipline from an accredited institution. May substitute equivalent engineering experience in lieu of education.
• Must have a basic understanding of engineering concepts, principles, and theory.
• Demonstrates the ability to follow and apply basic engineering knowledge, adapt standard techniques, and utilize the required diagnostics, tools and equipment, while ensuring safety and regulatory compliance.
• Must be able to understand new concepts quickly and apply them accurately throughout an evolving environment.
• Good communication, computer, and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a limited internal audience.
• Must be able to work both independently and on a team.
• Able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: DW-11536
Job Location: San Diego, CA
Rate: 35-42/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Industrial Engineer II

Location: Savannah
Rate: $35.00 - $38.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
* Shop floor layout (6S)
* Maintenance ground support experience.


Education and Experience Requirements:
Bachelor’s degree in Industrial, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience. Proven knowledge of Lean and/or Six Sigma principles. Three (3) years Industrial Engineering, Manufacturing Engineering, or related technical experience. Ability to read and interpret blueprints and facility layouts. Ability to operate personal computers, CAD systems, and appropriate software.


Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Principal Duties and Responsibilities:
Essential Functions: 1. Perform all activities necessary to support assigned area, providing timely response to all requests. Assure assigned projects are accomplished within projected time and approved costs. 2. Prepare and submit necessary paperwork for equipment, machinery, and facilities acquisition including justifications and economic analysis. 3. Initiate and implement cost reduction programs. 4. Implement plant layout, process flow, and material handling techniques 5. Maintain and submit daily/weekly/monthly activity reports and project status. 6. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, employee suggestions, and make-or-buy proposals. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 8. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 9. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 10. Support all Safety, Sustainability and Ergonomic initiatives as required.

Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. 4. Perform other duties as assigned.
 
Job Number: 7303
Job Location: Savannah, GA
Rate: $35.00 - $38.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Manufacturing Engineer - Level 1

Location: Marion, MA
Rate: $25.00 - $35.00/HR
1 year contract position

**MUST be able to obtain a Secret Clearance**

Description
- Plans, directs, and coordinates elements of design, materials, and manufacturing processes in industrial plants.
- Works from the design for a product and develop processes for production, standards, and quality control.

Skill/Experience/Education
Mandatory:
- Manufacturing Engineering experience.
- Pro-E experience.
- Procedure development experience.
 
Job Number: 7252
Job Location: Marion, MA
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2

Description:
Manufacturing Engineer - Level 2

Location: Orlando, FL
Rate: $23.00 - $27.00/HR
1 year contract position
1st Shift


Description
- Provides manufacturing engineering support for a variety of TLS programs.
- Provides technical guidance in addition to timely problem resolution to manufacturing operators.
- Creates assembly planning based on drawings and solid models, participates in engineering reviews, identifies opportunities for process improvement, and interfaces with Tech Ops/Design Engineering organization to implement DFA concepts.
- Develops build aides to improve workflow and reduce injuries.
- Applies lean manufacturing techniques to reduce cost and increase yields.
- Investigates root cause of failures/defects and implements corrective actions to support continuous improvement.
- Must have good communication skills and be able to work effectively in a team environment.
- May be required to develop cost estimates in support of proposals.


Skill/Experience/Education
Mandatory:
- Bachelors degree in Industrial Engineering or other related field.
- Ability to read and interpret engineering drawings and parts lists and create manufacturing work instructions to meet all requirements.
- Experience with electro-mechanical assemblies and able to interpret schematics and wiring diagrams.
- Previous experience with cable, electro-mechanical assemblies and/or cabinet assembly.
- Experience in resolving engineering, planning, tooling and assembly problems.
- Ability to work closely with design engineering, assembly operators, test, quality assurance and other operations support teams.
- Demonstrated capability to multitask in support of multiple concurrent programs and initiatives.
- Excellent communication skills both written and verbal.
- Microsoft Office suite experience with MS Outlook, Word, PowerPoint, and Excel.

Desired:
- Understanding of lean and six sigma principles
- Greenbelt certified
- Familiarity with SAP (Qnotes, Routings, Bills of material)
- Experience with Creo, or equivalent software
 
Job Number: 7273
Job Location: Orlando, FL
Rate: $23.00 - $27.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer - Solidworks

Description:
Title: Mechanical Designer
Location: Anaheim, CA (LOCAL CANDIDATES ONLY)
Duration: 6 month contract


Basic Qualifications

Must be very good in AutoCAD and Solidworks 2015!!!!!!!
Solidworks CSWP or CSWE is preferred
Required:

High school graduate and two (2) years college - mechanical/electrical engineering courses
8-10 years design experience on or around machine design, vehicle design, power train, industrial equipment automation, pneumatics, & hydraulics
Proficient in parametric solid modeling & CAD software packages; minimum of 5-10 years experience
Proficiency in AutoCAD & SolidWorks; minimum of three years experience
Proficient in developing correct form, fit & function of designs
Proficient in design & detail of components & assemble &make supporting analysis
Familiarity with maintenance requirements & procedures for common mechanical components
Familiarity with weldment drawings & callouts
Proficient in materials selection & application
Proficient in fastener selection & design
Proficient in using measuring devices such as scales, calipers, & micrometers
Proficient in configuration & document management
Proven knowledge of ASME Y14
Proven minimum two (2) years experience working with Microsoft applications (Word, Excel, PowerPoint, Outlook)
Desired Qualifications:

Accuracy, focus, productivity, good communication skills
Ability to work with tight schedules *Familiarity with SmarTeam software
Proficient in geometric dimensioning & tolerancing
Knowledge of AWS welding standards & requirements
Required Education

High school graduate and two (2) years college
Preferred Education

Bachelors Degree (or Masters Degree)
 
Job Number: JG366614
Job Location: Anaheim, CA
Per Diem: No
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Analyst I

Description:
Program Planning & Scheduling Analyst I
Savannah, GA
Long Term Contract
$30.00/Hr

Unique Skills:
Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

Education and Experience Requirements:
Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

Position Purpose:
Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principal Duties and Responsibilities:

Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

Additional Functions: 1. Perform other duties as assigned.
Languages Required (in addition to English): English
 
Job Number: 7074
Job Location: Savannah, GA
Rate: 30.00
Per Diem: $110/Weekly, Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Contractor

Description:
Program Planning & Scheduling Contractor
Savannah, GA
Rate: $45

Unique Skills:

Additional Requirements: 1. Accustomed to working in a fast paced project environment and able to work overtime as required to meet deadlines 2. Experience planning, scheduling and/or managing the development of new Instructions for Continued Airworthiness (ICA) procedures that meet and exceed applicable regulatory requirement is a plus. 3. Proven experience measuring and reporting project earned value management [EVM] CPI and SPI performance indices.


Education and Experience Requirements:

Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Masters Degree desired. Eight years formal schedul exp with regard to plan, sched, and maintaining overall business analysis of managed prgs. Exp in aero industry desired. Requires adv knowledge and exp with PC software such as MS Excel, Project, Access, Word, PPT.

Position Purpose:

Under minimal supervision develop, perform, and manage activities related to schedule, program plans, detail financial and resource analysis using past and present information along with lessons learned, and other duties in support of assigned programs. This includes the development and implementation of operating plans to support major development efforts and corporate goals.

Principal Duties and Responsibilities:

Essential Functions: 1. Manage the schedule and/or financial operations of assigned programs that may include any or all of the following coordination with Programs, Engineering, Finance, Operations, Sales, and Product Support. 2. Develop and utilize efficient tools for collecting and maintaining business and financial analysis data. Analyze data to identify financial and non-financial impacts of managed programs. 3. Provide detail information to support planning and implementing development strategy analysis, including risk management and program impact analysis. 4. Interfaces with department managers and staff to develop status, forecast, and build recovery plans to support assigned program schedules. 5. Develop and utilize schedule and financial planning relationships using historical data and lessons learned for setting up new and projecting the outcome of existing programs and make recommendations. 6. Provide detail information to support planning and implementing development strategy analysis, including risk management and program schedule and financial impact analysis. 7. Provide guidance and leadership to senior level, intermediate level and entry level employees in any or all of the before mentioned organizations.

Additional Functions: 1. Manage, tracking and analyzing of budget verses actual expenditures, including detailed analysis of all expense incurred to be reported in a timely manner. 2. Coordinate with the departmental leads and managers to insure plans meet approved budget, which may include corrective action in job charging. 3. Review cost expenditures and revenues with Program Managers to insure margin goals are achieved. 4. Perform other duties as assigned.

Other Requirements: 1. Must be able to independently resolve schedule or finance impacts and provide recommendations to management. 2. Excellent written and verbal communication skills and strong interpersonal skills required.
 
Job Number: 6967
Job Location: Savannah, GA
Rate: $45
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Summary Statement:

Applies advanced knowledge of principles, theories, concepts and industry practices and standards in the area of planning and directing activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products.

Essential Functions and Key Responsibilities:

1-Develops solutions to problems of moderate scope and complexity requiring judgment and ingenuity working within established standards and procedures relative to planning and directing activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Management applies general direction to the results expected and reviews completed work for soundness and accuracy.
2-Conducts analytical studies on simple to moderately complex engineering proposals to develop and initiate standards and methods for inspection, testing, and evaluation. Analyzes research data and proposed product specifications to determine feasibility of product proposal. Confers with research personnel to clarify or resolve problems.
3-Devises sampling procedures, designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
4-Establishes programs to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
5-Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility. May perform on site quality audits of vendors for initial qualification, maintaining vendor qualification and quality problem resolution.
6-Directs workers engaged in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability.
7-Compiles and writes training material and conducts training sessions on quality control activities.
Formal Education, Training, Professional Certification and Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Bachelor's degree (B. A.) from four-year college or university and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
 
Job Number: QEII
Job Location: Tulsa, OK
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APA AVIATION STAFFING LLC
Attention: Lisa Adams
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
Phone: 918/803-4005
Website: apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Seeking a Engineer Structural 4/5 for an opening in Melbourne, FL.

**Must have Active Secret Clearance to start**

RESPONSIBILITIES:
Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.

REQUIRED EXPERIENCE:
Dynamics Engineer 5 (1 position)
-Primary responsibilities include dynamics related support of structural and subsystem design and testing.
-Required skills include structural and subsystem test dynamic loads development, impact analysis, as well as shock, vibration, and acoustic evaluation and mitigation.
-The work will include building dynamic models, and conducting static and dynamic analyses.
-The work will also include test planning and coordination for ground and subcomponent tests.
-14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.

Structural Analysis Engineer 4 (1 position) -Experienced Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue.
-Primary responsibilities include support of primarily metallic subsystem and secondary structure design.
-9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.

EDUCATION:
Bachelors in Science

WORK HOURS:
Shift: 1st Shift - 9/80

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 162893
Job Location: Melbourne, FL
Rate: $55-$80
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineers (Level 3) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Structural Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs
• Analyzes damage tolerance, durability, design allowables and structural modeling
• Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis
• Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications

Qualifications:

• Mid-level Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue
• Primary responsibilities include support of primarily metallic subsystem and secondary structure design
• 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD
• All positions Require an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38298
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineers (Level 4 & 5) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Structural Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs
• Analyzes damage tolerance, durability, design allowables and structural modeling
• Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis
• Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications

Qualifications:

• Level 5:
o Primary responsibilities include dynamics related support of structural and subsystem design and testing
o Required skills include structural and subsystem test dynamic loads development, impact analysis, as well as shock, vibration, and acoustic evaluation and mitigation
o The work will include building dynamic models, and conducting static and dynamic analyses
o The work will also include test planning and coordination for ground and subcomponent tests
o 14 Years’ with Bachelors in Science; 12 Years’ with Masters; 9 Years with PhD
• Level 4:
o Experienced Mechanical, Aerospace or Civil Engineer with experience in aerospace static and dynamic structural analysis, structural design, shock, vibration, and fatigue
o Primary responsibilities include support of primarily metallic subsystem and secondary structure design
o 9 Years’ with Bachelors in Science; 7 Years’ with Masters; 4 Years’ with PhD
• All positions Require an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38299
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer (entry level) CA

Description:
11537
Title Systems Engineer
San Diego, CA
35-42/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Entry level Systems and System Test & Qualification Engineer (ST&Q). This position is located at our Poway, California location, supporting test and evaluation (T&E) and systems engineering activities on GA-ASI aircraft and ground control stations. The candidate will be interested in a fast-paced aviation environment, which still allows for a reasonable work/life balance.

This position is responsible for testing and qualifying performance on unmanned aerial vehicle systems, as well as handling some of the typical roles performed by a Systems Engineer. As a member of this team, the candidate will support various programs from concept design through production aircraft test and qualification efforts. The candidate will create and review system design requirements, participate in software regression testing, develop flight performance scenarios, and pass/ fail criteria in the evaluation of aircraft, ground control stations and support equipment.

DUTIES AND RESPONSIBILITIES•Entry level candidate will hit the ground running and quickly learn the principles of GA-ASI products and processes
•Perform Test and Evaluation (T&E) activities under minimal supervision; will determine and develop various approaches to achieve T&E goals and help guide the completion of test activities
•Act as a test engineer during SIL, ground, and flight operations; test duties include system level T&E of hardware and software with emphasis placed on resource planning, conducting the required tests, and participating in technical test reviews
•Communicate clearly and in writing all facets of the system test program to include test plans, procedures and reports; may work with government aircrew and also be responsible for conducting pre-flight briefings and post-flight debriefings
•Develop effective approaches to resolving issues; support operation of engineering systems by documenting flight performance and evaluating solutions for improvement
•Troubleshoot and analyze systems in a lab and flight test environment
•Establish metrics for requirements traceability; perform data analysis and make technical presentations as required
•Analysis of interconnect diagrams, engineering drawings, schematics, and software releases
•Take part in a team effort to develop, lab test and qualify payload, ground station, ground support equipment and aircraft subsystems
•May directly track efforts including cost, schedule, manpower resources, maintenance intervals and performance
•May represent the organization in providing solutions to technical issues associated with specific projects
•Maintain the strict confidentiality of sensitive information
•Perform other duties as assigned
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company
•Expected to work in a safe manner in accordance with established operating procedures and practices
Job Qualifications•Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution
•Must have a complete understanding of engineering concepts, aircraft principles, codes, and theory
•Previous flight test engineer with a qualification to perform tests for a military organization including prior Department of Defense (DOD) Developmental Test (DT) or Operational Test (OT) experience is highly desired
•Analysis expertise desired with an emphasis on data collection, ad hoc queries and suitability measures; experience with analysis tools such as MATLAB, LabVIEW, or other similar products
•Previous expertise and working knowledge of the National Airspace System and UAS operating rules and regulations thereof; prior civil flight experience or military aircrew desired
•Must possess the ability to understand new concepts quickly, apply them accurately throughout an evolving environment, organize, schedule, and coordinate work phases and determine the appropriate approach at the task, operational or depot level to provide solutions to a range of complex problems
•Must have excellent communication, computer, documentation, presentation, and interpersonal skills; the ability to work independently and as part of a team; able to perform complex tasks in multiple engineering areas, and lead a team of less experienced professional employees on semi-routine tasks
•Able to work extended hours and travel as required
•Experience as a test conductor, test director, test pilot/navigator or formal leadership of a Combined Test Force (CTF) or Integrated Test Force (ITF) is desired
•Experience with Earned Value Management (EVM) or as a Control Account Manager (CAM) is desired



Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: DW-11537
Job Location: San Diego, CA
Rate: 35-42/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer CA

Description:
Job Title: Systems Engineer
Job Number: 158760/11546
Location: San Diego, CA
Compensation: 52-58/hr max
Assignment Length: contract

Description:

• General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

• We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

• We have an exciting opportunity for a senior level Systems and System Test & Qualification Engineer (ST&Q). This position is located at our Poway, California location, supporting test and evaluation (T&E) and systems engineering activities on GA-ASI aircraft and ground control stations. The candidate will be interested in a fast-paced aviation environment, which still allows for a reasonable work/life balance.

• This position is responsible for testing and qualifying performance on unmanned aerial vehicle systems, as well as handling some of the typical roles performed by a Systems Engineer. As a member of this team, the candidate will support various programs from concept design through production aircraft test and qualification efforts. The candidate will create and review system design requirements, participate in software regression testing, develop flight performance scenarios, and pass/ fail criteria in the evaluation of aircraft, ground control stations and support equipment.

DUTIES AND RESPONSIBILITIES

• Senior level candidate will hit the ground running and quickly learn the principles of GA-ASI products and processes

• Perform Test and Evaluation (T&E) activities under minimal supervision; will determine and develop various approaches to achieve T&E goals and help guide the completion of test activities

• Act as a test engineer during SIL, ground, and flight operations; test duties include system level T&E of hardware and software with emphasis placed on resource planning, conducting the required tests, and participating in technical test reviews

• Communicate clearly and in writing all facets of the system test program to include test plans, procedures and reports; may work with government aircrew and also be responsible for conducting pre-flight briefings and post-flight debriefings

• Develop effective approaches to resolving issues; support operation of engineering systems by documenting flight performance and evaluating solutions for improvement

• Troubleshoot and analyze systems in a lab and flight test environment

• Establish metrics for requirements traceability; perform data analysis and make technical presentations as required
• Analysis of interconnect diagrams, engineering drawings, schematics, and software releases

• Take part in a team effort to develop, lab test and qualify payload, ground station, ground support equipment and aircraft subsystems

• May directly track efforts including cost, schedule, manpower resources, maintenance intervals and performance

• May represent the organization in providing solutions to technical issues associated with specific projects

• Maintain the strict confidentiality of sensitive information

• Perform other duties as assigned

• Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company

• Expected to work in a safe manner in accordance with established operating procedures and practices

Job Qualifications

• Senior level typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows nine years of experience with a bachelor’s degree or seven years of experience with a master’s degree; may substitute equivalent engineering experience in lieu of education

• Must have a complete understanding of engineering concepts, aircraft principles, codes, and theory

• Previous flight test engineer with a qualification to perform tests for a military organization including prior

• Department of Defense (DOD) Developmental Test (DT) or Operational Test (OT) experience is highly desired
• Analysis expertise desired with an emphasis on data collection, ad hoc queries and suitability measures; experience with analysis tools such as MATLAB, LabVIEW, or other similar products

• Previous expertise and working knowledge of the National Airspace System and UAS operating rules and regulations thereof; prior civil flight experience or military aircrew desired

• Must possess the ability to understand new concepts quickly, apply them accurately throughout an evolving environment, organize, schedule, and coordinate work phases and determine the appropriate approach at the task, operational or depot level to provide solutions to a range of complex problems

• Must have excellent communication, computer, documentation, presentation, and interpersonal skills; the ability to work independently and as part of a team; able to perform complex tasks in multiple engineering areas, and lead a team of less experienced professional employees on semi-routine tasks

• Able to work extended hours and travel as required

• Experience as a test conductor, test director, test pilot/navigator or formal leadership of a Combined Test Force (CTF) or Integrated Test Force (ITF) is desired

• Experience with Earned Value Management (EVM) or as a Control Account Manager (CAM) is desired




Qualifications Essential Qualifications

• Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD.

• May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

• Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment.

• Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.

• Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment.

• Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: DW-11546
Job Location: San Diego, CA
Rate: 52-58/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer II

Description:
Tool Design Engineer II

Location: Savannah, GA
Rate: $55/HR
Long Term contract

Unique Skills:

Life cycle tool design for FAR 145 Repair Station and CATIA V


Education and Experience Requirements:

Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.

Position Purpose:
Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write procedures on use of tools.

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. 4. Perform other duties as required.

Other Requirements: 1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
 
Job Number: 7315
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer II

Description:
UNIQUE SKILLS
Life cycle tool design for FAR 145 Repair Station and CATIA V

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.

POSITION PURPOSE
Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write procedures on use of tools.

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as required.

OTHER REQUIREMENTS
1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, heat treat method and uses.
3. Ability to conceptualize the following with minimal supervision. Assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
 
Job Number: 17-682-99301
Job Location: Southeast
Rate: From $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer II

Description:
Tool Design Engineer II

Location: Savannah, GA
Rate: $55.00/HR
Long Term contract
4x10


Education and Experience Requirements:
- Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment.
- Three (3) years Tool Design experience.
- One (1) year CAD/CATIA experience.


Position Purpose:
Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write procedures on use of tools.

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. 4. Perform other duties as required.

Other Requirements: 1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
 
Job Number: 6754
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Welding Manufacturing Engineers - Sunnyvale, CA

Description:
STS AeroStaff Services is currently hiring Welding Manufacturing Engineers for open positions in Sunnyvale, California.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• This position provides technical direction and support for Operations in areas of welding, fabrication and heat treat
• Requires the ability to troubleshoot complex manufacturing issues, improve existing manufacturing processes, and develop new processes, to include tooling and fixtures
• Qualify welding procedures, prepare engineering documentation and instructions to support shop fabrications per industrial and military standards
• The candidate must have an understanding of weld inspection and processes to assist shop personnel in the interpretation and implementation requirements
• Duties include developing instructional material for the training and certification of welding and fabrication personnel
• Provide input to Design Engineering to ensure that designs are optimized for manufacturing and meet all requirements of the contract welding specifications
• Support estimating activities for new or existing products as required and work with suppliers to resolve problems and meet incoming material and fabrication requirements

Qualifications:

• Related Degree is strongly preferred, but not required
• Looking for actual experience in the discipline of gear machining (grinding and hobbing); someone who has experience with the gear machining equipment and processes
• Direct job experience relating to welding engineering and manufacturing of heavy fabrication products a huge plus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38200
Job Location: Sunnyvale, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

Back to Advanced Job Search