Job Search Results

404 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/11/29 Monday 10:10PM Pacific Time by ContractJobHunter. )

Listings 1 - 404

Go To My Job Tracker

Expand all descriptions

10 - Structural Analysis Engineers - Level 2 & 3 Openings

Description:
We have 10 contract Stress Analysis Engineer positions in Berkeley, MO.  The manager prefers people onsite.
Duration is 8-months+

5 Structural Analysis Level 2 Needed
&
5 Structural Analysis Level 3 Needed

• Experience performing analysis on primary and secondary structure and/or systems installations
• Experience with Nastran/Patran and/or Hypermesh desired
• Able to perform classical hand analysis
• Experience writing strength notes
• Experience working on military aircraft programs preferred
• BS in Engineering + 2 or more years of related experience.

Develops, integrates and documents structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general direction.

The Structures Company LLC is an AA/EOE
 
Job Location: Berkeley, MO
Rate: $60-72/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 1-year+
Start Date: ASAP
Input Date: 08/12/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Sr. MRB/Liaison Engineer - Structures

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

• 100% Onsite in NM
• 20+ years experience
• Structures MRB capable
• Would go through MRB testing/training (Will need around 2 months to get the person MRB trained)
• 10+ months duration
• First 1-2 months on 1st shift while training
• Training with desire to enable MRB support onsite in NM for 2nd and possibly 4th shift during this next downtime


Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews
• Participate in product Corrective Action Board (CAR) reviews
• Willingness to support weekend shift operations



Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company LLC is an AA/EOE
 
Job Number: 519
Job Location: Truth or Consequences, NM
Rate: ***DOE***
Per Diem: Yes
Duration: 10+ Months, Possibly longer
Start Date: ASAP
Input Date: 10/01/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

20 Project Engineers Needed - Everett, Renton, Tukwila, WA

Description:
We have 20 total openings for Project Engineers in Everett, Renton or Tukwila, WA locations.
There are 10 level 4 openings and 10 level 5 openings.

Provides the Engineering leadership to a team representing multiple skill areas, which may include internal and external resources and customers. Develops statement of work (SOW) to satisfy research and development, ongoing and new business requirements. Works with customers and management to obtain approval. Identifies and manages changes to statement of work and assesses the impact of those changes, and incorporates changes into statement of work. Negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies and coordinates resources required over the life of the project or program. Assigns responsibility for activities to team members and ensures technical correctness and consistency of products and services. Directs proposal development to complete the work statement. Compares actual results to baseline plan to assess project performance, efficiencies, productivity and lessons learned. Identifies corrective actions to improve project or team performance. Provides technical, business and integration leadership for the development and execution of project or team plans. Works under consultative direction.

Position Responsibilities:
• Lead a Team in performing technical trade studies, design requirements, overall development and project management.
• Provide over-sight of continued development and maintenance of master operating plan and tie into integrated schedule.
• Lead cross functional groups to resolve technical issues and document key decisions.
• Ensure that coordination occurs across teams and between other airplane teams to ensure horizontal technical integration is accomplished.
• Play key coordination role in bringing Trade Studies/Agile Team Decisions to closure.
• Lead the team in successfully planning and conducting key technical reviews.
• Coordinate successful compliance with Gated Management process.
• Lead team in finalizing the baseline configuration and development of a customer options.
• Identify and focal development of mitigation plans for potential design, build and validation problems.
• Work as Product Owner, Team Member, or Consultant to ensure Systems Input/ Integration across the airplane & guiding teams.
• Develop solutions that balance complex customer requests with Boeing strategies

Basic Qualifications (Required Skills/Experience):
• Bachelor's degree or higher in engineering, computer science, mathematics, physics or chemistry.
• 10+ years’ experience performing complex engineering or integration work.
• Have excellent written and verbal communication skills, and have experience leading complex projects.
• Must be a self-starter, adept at leading complex projects and influencing people across multiple organizations.
• Ability to clearly communicate complex scenarios with diverse internal and external -personnel (peers, executive leadership, suppliers and airline customers).
• Strong project and risk management skills/knowledge.
• Highly competent in systems thinking and analytical skills.
• Fosters a healthy, creative and productive team environment.
• Flexibility, adaptability and comfortable with a variable work statement.

Preferred Qualifications (Desired Skills/Experience):
• Understanding of larger role of function to airplane/ big picture understanding/ Systems Thinking.
• Previous Integration, or project lead experience is highly desired.
• Previous Production, Flight Test, or Flight Sciences experience.
• SME-level knowledge of Federal Aviation Regulations with regards to maintenance, certification, repair, and operation of commercial aircraft.
• Experience with Engineering Integration, leading engineering projects, integration and test activities.
• Experience leading and/or managing complex projects.

TSC is an AA/EOE
 
Job Location: Everett Renton Tukwila, WA
Rate: $75-95/hr
Per Diem: Yes
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

3 Manufacturing Engineer II Needed

Description:
Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (fuel, bleed air, cabin pressure, Oxygen and ECS), manufacturing processes and/or tooling. The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
1. Analyze a variety of engineering data to help determine requirements to meet objectives
2. Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
3. Work on various product and process flow segments of developmental projects
4. Conduct RCCA tests or experiments, record and evaluate data and report findings
5. Responsible for process capability studies, test capability studies, & through-put rates
6. Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
7. Identify and develop specifications for purchase and installation of new capital-equipment
8. Work with engineers and other personnel on continuous improvement projects as required
9. Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
10. Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
11. Promote and contribute to overall team environment
12. Review and development of specifications and processes applicable to aircraft electrical systems
13. Procedure documentation for assembly/fabrication/operation of new or existing components
14. Evaluates/improve assembly and testing methods
15. Adhere to production times, staffing requirements, and related costs on quality control and industry standards
16. Assist in identifying and evaluating suppliers for new or critical processes & components
17. Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
1. B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
2. Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
3. Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
4. Must have a strong working knowledge of the following:
• Evaluating and approving engineering design data (drawings, specifications, etc.)
• Participating in design reviews and providing technical feedback
• Design for manufacture-ability and design for assembly
• Identifying the need for tooling and presenting technical requirements
• Developing build plans based on installation drawings
• Proposing design changes based on RCCA findings
• Organizing and presenting technical information to all levels of management
5. Strong communication skills
6. Basic CATIA V5 experience is a plus
7. Strong knowledge of design/drafting practices
8. Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
1. Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
2. Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
3. The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
4. The ability to read and interpret engineering drawings and/or specification requirements
5. Excellent problem solving skills and the ability to work in a diverse environment
6. Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
7. Employee must have ability to work independently and multitask with a strong work ethic
8. Time management and prioritization of assignments
9. Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
10. Ability to work in a constant state of alertness and safe manner

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company LLC is an AA/EOE.
 
Job Number: 513
Job Location: Greensboro, NC
Rate: $27-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

4 Mechanical Systems Design Engineers Needed

Description:
Design Engineers responsible for the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
1. OR MS / MBA with 8-13 years of experience
2. OR 18-23 years directly related experience
2. Some Travel will be required


Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company LLC is an AA/EOE.
 
Job Number: 491
Job Location: Greensboro, NC
Rate: $60-$66/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year +
Start Date: 4-6 Weeks
Input Date: 07/12/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 09/21/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

6 Aircraft Stress Engineers with Strong Composites

Description:
Stress Engineers with Composites needed in Mojave, CA.
MUST BE US Persons
Must be good with composites
FEMAP is a huge plus

Basic Qualifications
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR
Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/14/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

6 Structural Design Engineers Needed

Description:
General Summary:

Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:

1. Generates engineering models, drawings, parts list and EO utilizing CATIA V5
2. Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
3. Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
4. Familiarity with structural analysis methods, load paths, and material properties
5. Manages task execution to ensure on-time and on-target completion
6. Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
7. Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
8. Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
9. Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions
Education, Work Experience, Certification and/or Licensure:

1. Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
2. Minimum of 5 years of primary and secondary structural design experience
3. Must possess a minimum of 2000 hours of experience with Catia V5

Knowledge, Skills and Abilities:

1. Knowledge of AMSE Y14.5 dimensioning and tolerancing
2. Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
3. Experience with Catia V5
4. Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
5. Proficient in Microsoft Office Products


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided 'reach assistance technology' or 'movement assist technology' (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.



The Structures Company LLC is an AA/EOE.
 
Job Number: 510
Job Location: Greensboro, NC
Rate: $55-$66/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 09/28/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

8 Electrical Engineers Needed w/ AutoCAD

Description:
• Experience with AutoCAD
• Must have aircraft experience
• Experience with modification special mission work, radio integration and sensor integration.
• Must be US Citizens




The Structures Company LLC is an AA/EOE.
 
Job Number: 486
Job Location: Denver, CO
Per Diem: Possible
Duration: 6 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/17/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
An A&P Mechanic job in Fort Worth, TX is currently available through Belcan. If you are interested in career growth, company stability with a ton of learning opportunity this is the job for you. In this role, you will be responsible to carry out assigned tasks, in accordance with the applicable maintenance manual, ensure maintenance operations are performed in the appropriate sequence as determined by the application maintenance data. To be considered for this role, you will need to have been a licensed mechanic for at least 1 year with 10-15 years of experience or 5-6 years experience with Falcon and Gulfstream aircraft.

JOB TITLE Job duties:

* Ensure that inspections are requested in an orderly and timely manner, and that the maintenance activities are performed according to the appropriate maintenance data.
* Ensure that tools and equipment used to make airworthiness determinations are labeled as calibrated and are within date limits in accordance with the manual
* Complete the appropriate paper work accurately
* Must have A&P License
* Minimum 1 year experience and have FAA Airframe rating
* Or 3 years minimum experience with Falcon 50, 90, 2000 and/or IAI G100, G150 G200 GIV
* Must have at least 10 years experience or 5-6 years experience with Falcon and Gulfstream aircraft.


If you are interested in this A&P Mechanic job please apply via the apply now link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity

 
Job Number: 314932
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/04/2021
Last Updated: 11/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

A&P Mechanic

Description:
PDS Tech is seeking an A&P Mechanics in Indianapolis, IN

Performs assembly, disassembly and repairs required in the completion of airframe overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, airframes and systems. Responsible for helping licensed mechanics set up and tear down the equipment, tools and supplies used during the repair of the aircraft. Required to tow and move aircraft during the performance of maintenance duties. Assists in the cleaning of parts and components during the repair and assembly of aircraft. Performs other tasks and duties associated with the aircraft operation
High school education or equivalent required • A&P License is required. • Experience or working knowledge of mechanical devices. Prefer basic knowledge of aircraft systems
Experience on mechanical repair of vehicles, preferably aircraft –through technical training, apprenticeship, schooling, or similar experience is preferred.

Must be able to obtain and maintain an airport security badge through the local airport authority, if applicable.
 
 
Job Number: 2110127846
Job Location: INpolis, IN
Duration: 3 months
Input Date: 08/11/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pcq9QAC&URLSource=cjhunter

A&P Mechanic

Description:
AKKA Technologies (Mother Company of PDS) is currently looking for an A&P Mechanic to work on C2 and EC-145 Helicopter models with our client in Grand Prairie, TX.
Our customer is a leader in Helicopter Manufacturing for both civil and military application.

Duties:
  • Researching and using information from the appropriate maintenance manual, wiring diagrams, or FAA documentation to perform the necessary tasks to maintain the aircraft in airworthy condition

Requirements:
  • A&P License with a minimum of 2 years hands on recent experience.
  • Experience on at least 2 of these different rotor-craft air frame makes, Bell, Airbus, or Augusta Helicopters.
  • Must have a basic knowledge of Aircraft Maintenance Manuals, FAA documentation and .
  • Must possess basic computer skills using the English language.
  • A technician with flight line and track & balance experience is preferred.

 
Job Number: 2110133973
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 09/16/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Scout Wonsang
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pu7sQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Job Description:
These are MH-60R and S-76D Flight Operations mechanic positions.
Troubleshoots, repairs and services aircraft and engine systems and may be responsible for inspection.
Interprets and uses various test equipment and works from wiring diagrams and maintenance manuals.
May maintain FAA required records, manuals and inspection forms.
May fuel and groom the aircraft.

A&P license is required.
At least 1 to 2 years experience as an A&P Mechanic is required.
Prior S-76 experience is greatly desired.
Commercial Rotary Wing experience is desired.
Interim Secret is required to start
 
Job Number: CJH-R-6844
Job Location: Owego, NY
Rate: $36
Per Diem: no
Overtime: Yes
Duration: 15 Months
Start Date: ASAP
Input Date: 10/11/2021
Last Updated: 10/13/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 36242
Job Location: Oscoda, MI
Input Date: 10/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Mindy Paolini
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

A&P Mechanics - Secret Clearance (S-92 / Blackhawk experience)

Description:
PDS Tech is seeking A&P Mechanics with Secret Clearance and S-92 / Blackhawk experience for open positions in Owego NY

The ideal candidate will assist in the planning for accomplishing periodic Preventative Maintenance and Inspections

Requirements:
  • A&P Mechanic with S-92 / Blackhawk experience
  • Must have rotary aircraft structures experience preferably on Sikorsky products


The ideal candidate will:

  • Establish trends for overhaul and major repairs needed for planning and scheduling
  • Identify unscheduled maintenance plans and avoidances
  • Address stocking of maintenance spares required to timely maintain common fleet
    component failures
  • Implement plans for correction of known discrepancies categorized into; immediate
    action, on availability of parts, and on next planned maintenance.
  • Provide hands-on troubleshooting, requisitioning of repair parts for component failures found in troubleshooting, and installation of corrected components
  • Provide on-the-spot hands-on expertise needed to resolve technical problems
    incidental to the operation of aircraft
  • Establish best approach for corrosion prevention techniques
    Provide end-to-end supply chain review ensuring cost effective options are made available for customers' consideration of stocks and repairs
  • Improve readiness with test, measurement, and diagnostic equipment required for
    ensuring uncompromising quality
  • Execute VH-92A Presidential Helicopter Program production structural modifications
  • Provide other ad-hoc production support as required


 
Job Number: 2110132620
Job Location: Owego, NY
Duration: 15 months
Input Date: 06/09/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PqDRQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics 

Description:
STS Technical Services is hiring A&P Mechanics in Shreveport, Louisiana.

Overall Responsibilities:

The A&P Mechanic is responsible to perform functions assigned in the service, repair, and overhaul of aircraft and aircraft components, parts and accessories, in which they will be qualified and appropriately certificated for the work performed. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Job Duties:
Shall positively support and promote safety, security, and quality as a fundamental function of the overall responsibility.
Inform his Supervisor/Lead immediately of any un-airworthy conditions found during performance of work assigned.
Keep a clean and safe work area at all times. Ensure that waste materials, paint, alodine, and other fluids are properly handled.
Coordinate with other departments as necessary to ensure a smooth and continuous workflow.
Read and use maintenance manuals, illustrated parts catalogs, blueprints, ATA codes, service bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments, within assigned time lines.
Complete all tasks to the quality standards of WGA, FAA, and approved maintenance manuals.
Perform such typical maintenance operations adjusting rigging and safety wiring. This includes power plant and flight control removal and reinstallation.
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness.
Ensures proper execution of parts tags attached to repairable, serviceable or condemned parts.
Ensure that the maintenance documents are accurate and properly annotated.
Use and operate safely all ground support equipment.
Ensure that GMM, and FAA regulations and procedures are followed.
Accomplish all required servicing of the aircraft including wheel and brake replacement, engine oil servicing, replacing burnt out light bulbs, wiping down struts, etc.
Perform other duties as directed by their direct supervisor and/or direct manager.
While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands to finger, handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move more than 50 pounds.
Qualifications:
FAA A&P License
High school diploma or equivalent.
Occasional travel to perform duties away from base.
Two (2) years, aircraft maintenance experience. MD-11/B747, preferred.
Transport category aircraft (Preferred).
Must be able to read, write, and understand the English language.
Must provide own tools.
Valid, unrestricted Driver’s License.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 37507
Job Location: Shreveport, LA
Input Date: 11/05/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Nicole Taylor
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Technicians

Description:
STS Technical Services is hiring A&P Technicians in Nashville, Tennessee. 

Job Description:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
Consults the Maintenance Lead if technical assistance is needed during the repair process.
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
Completes work package documentation by signing/stamping after finishing all designated operations.
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
Provides supervisor with performance statistics and other operational data, as requested.
Properly accounts for time and materials used in all inspection and maintenance activities.
Qualifications:

Education:

High School/ GED
A&P

Experience:

Required: A & P License; minimum 2 to 5 years’ experience with small aircraft/ general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft.
Several years or actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools.

Knowledge, Skills & Abilities:

Assignments require Standard Knowledge of a Technical Area.
Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
Performs moderately complex Technical Assignments.
Assists Advanced Level Technicians on more complex technical assignments.
Knowledge of machines and tools, including their uses, repairs and maintenance.
Knowledge of principles and processes for providing customer service.
Skilled with repairing, troubleshooting, installing and equipment maintenance.
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 38565
Job Location: Nashville, TN
Input Date: 10/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Celeste Rodriguez
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Administrative Staff, Manufacturing

Description:
PDS Tech is currently recruiting for an Administrative Staff Representative (Manufacturing)  to work in Greensboro, NC!

The Administrative Staff will be responsible for providing administrative support to the Manufacturing department management team, department team members, and executive leadership as assigned.

Duties and Responsibilities:
  • Maintains the calendar of the department leader(s), ensuring that all appointments and meetings are clearly always documented and are up to date (times, locations, nature of appointment / meeting). 
  • Tracks the status of compiles and reports company data including department goals, benchmarks, achievements, and other data as needed. 
  • Prepares presentation materials for the department or department leader(s) including spreadsheets, reports, presentations, technical papers etc. 
  • Develops internal communications relevant to the department, as directed by the department senior leader. 
  • Manages small projects including initiation, planning, execution, monitoring, completion, and evaluation. 
  • Organizes and coordinates departmental activities and events including placing catering orders, setting up, and cleaning afterward.  Adheres to the budget or guidelines established by the department leadership regarding expense budget, type of food for catering etc. 
  • Coordinates travel including booking travel tickets and accommodations, researching, and securing appropriate travel visas, and processing expense reports as needed for the department management team. 
  • Applies his/her knowledge of departmental functions to offer ideas for administrative process improvements, increased project quality, or cost saving /efficiency measures to the team and management. 
  • Meets multiple concurrent deadlines and remains task oriented.  Continuously reprioritizes daily tasks and projects to ensure that the most business critical are completed successfully first and within set deadlines.
  • Handles sensitive or confidential data in a professional manner respecting policies, protocols, and requirements for confidentiality and/or discretion.
  • Functions as a professional representative of his/her team when interfacing with others within and outside of the department.
  • Maintains a high level of responsiveness to team needs by demonstrating excellent attendance and productivity, including arriving on time for scheduled shifts, remaining focused and attentive throughout the entire work shift, and working overtime as instructed by management. 


 
Education, Work Experience, Certification and/or Licensure:
  • Associate degree in Business Administration or related field strongly preferred.
  • At least 3 years of prior corporate work experience in an Administrative Assistant or Executive Assistant role within an international corporate setting is required.  Prior experience in an administrative role serving a diverse, multi-national employee population is highly desired.
  • Prior work experience in the field of Aviation, Engineering or an R&D setting is highly desired.


Knowledge, Skills and Abilities:

  • Excellent oral and written communication skills.
  • Strong organizational skills.
  • Strong attention to detail.
  • Intermediate to Advanced level proficiency in Microsoft Office – Word, Excel, PowerPoint, Lotus Notes is required.
  • Basic SAP and/or Teamcenter proficiency may be required (dependent upon the needs of the department).
  • Ability to work independently or within a team-oriented environment.
  • Ability to multitask.
  • Ability to display respect for other cultures, customs and norms while interfacing with a diverse management and employee team.
  • Ability to develop positive, effective, and professional working relationships with the department management and team.
  • Ability to utilize problem solving skills and sound judgment.


  • Ability to always conduct oneself in a professional manner.  
  • Ability to display a "team approach" to job duties, proactively volunteering to help when needed although required work may not regularly be part of the Administrative Staff job duties.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift, or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  

PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
 

 
Job Number: 2110139197
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 09/02/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6BIQAY&URLSource=cjhunter

Advanced Composite Technician I

Description:

PDS Tech is seeking an Advanced Composite Technician I for an opening in Savannah, GA.
 



Position Purpose:



Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment. 

Principal Duties and Responsibilities:

Essential Functions: 1. Manufacture composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations. 4. Check all work and ensure a defect free assembly prior to inspection. 5. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 6. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 7. Support Lean activities. 



 


 

Education and Experience Requirements:



  • High School graduate or GED. Basic computer skills.
  • One (1) year related composite experience.
  • Ability to work with composite resins and materials.
  • Requires ability to read a interpret blueprints.
  • Read and interpret 6" scale.


Unique Skills:



  • Solumina experience in an aircraft environment a plus.



Other Requirements:
1. Must be able to meet the physical requirements of the position.
2. Must be able to work any shift.


 

 


 

 
Job Number: 2110141158
Job Location: Savannah, GA
Per Diem: No
Duration: 0 months
Input Date: 10/14/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jD6nQAE&URLSource=cjhunter

Aeronautical Engineer - Secret

Description:
PDS Tech, Inc. is seeking an Aeronautical Engineer, in Palmdale, CA​​​​​​.

Responsibilities for this position include:
 
• Development, test, and validation of aircraft structural designs.
• Creating or modifying 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work.
• Creating system requirements, trade studies, sub-component and flight test plans.
• Coordinating with suppliers, internal and external integrated product teams.
• Providing manufacturing, component test and ground/flight test support.
• Investigating and determining root cause and recommending corrective actions for component failures.
• Serving as the prime technical contact for airframe structure and repair.
• May function in a project leadership role managing the system performance, budget and schedule.
Must be a US Citizen. This position is located at a facility that requires special access. Selected applicant will require a secret clearance prior to starting.
investigation w/ in 6 yrs

Prerequisites:
Must have experience with:
  • Catia V4 or V5
  • 3D Models
  • Air Frame Structure Design
  • MRB- Material Review Board
  • Liaison/shop support experience

Education:

  • BS+16 YRS or MS+14 YRS

 
Job Number: 2110139566
Job Location: Palmdale, CA
Duration: 14 months
Input Date: 10/06/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j7deQAA&URLSource=cjhunter

Aerospace Assembler

Description:
Are you looking to work for an Aerospace company on the forefront of technology? Are you known for your attention to detail and pride yourself in being a responsible professional? Join our team and take your career to new heights!

Primary Responsibilities Include:
*As an Aerospace Assembler, you will perform routine production assembly operations on
structural and mechanical assemblies, subassemblies and aircraft systems, equipment and
accessories using manual operations.
*Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc.
to install, fit, fasten, align, adjust and perform the necessary pre-installation
assembly work to accomplish the installation of airplane systems requiring the use of
production and engineering prints to determine exact locations.
*Report job constraints such as: errors caused by workmanship, defects in parts,
materials, assembly procedures, tools, sequences, etc., in accordance with procedures.
Perform any repairs, rework, functional checks and the incorporation of authorized
changes, etc., as outlined by Lead.
*Remove and/or replace installed components and any related parts.
*Ability to read and understand blueprints, drawings, schematics, engineering dispositions
and instructions.
*Be safety conscious; employ the use of safety glasses, safety harnesses, respirators,
boot socks, and other pertinent safety equipment 100% of the time.
*Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
*Maintain clean, neat, organized and FOD free work area.
*Possess understanding and knowledge of basic computer systems and programs.
*Ability stand for long periods of time, and work in elevated and/or confined spaces as
required.
*Frequent overhead work may be required.
*Frequent overtime may be required.

Ability to perform the following requirements:
*Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the
waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance,
flexion/extension.
*Contact with sealants and solvents, exposure to noise, working on elevated platforms.
*Use personal protective gear for face, eyes, ears, hand, and arms as required.
*Pass visual acuity and color perception tests.
*Read, write, and comprehend the English language.
*Handle, use, and dispose of hazardous material
*Obtain & maintain training certifications as required to support assignment
responsibilities.
*Occasional (1 to 3 hrs.) finger manipulation.
*On occasion, a 2-person lift may be necessary for weights greater than 50 lbs.
*Frequent reaching overhead (3 to 6 hrs.)Frequent walking on flat surfaces.
*Frequent standing flat or uneven surfaces.
*Frequent balancing on a ladder, steps, or uneven surfaces.
*Occasional climbing on 3-12 ft. ladders or stands.
*Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate
foot controls.
*Occasional contact with metals.
*Exposure to plastics and solvents to atmospheric conditions,
*Frequent exposure to noise.
*Candidates must be able to be moved as needed to the evening, afternoon, or morning
shifts if necessary.
 
Job Location: North Charleston, SC
Rate: $24/HR - $26/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/03/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

Aerospace Mechanic

Description:
Are you looking to work for an Aerospace company on the forefront of technology? Are you known for your attention to detail and pride yourself in being a responsible professional? Join our team and take your career to new heights!

Primary Responsibilities Include:
*As an Aerospace Mechanic, you will maintain repairs and modify aircraft structures and structural components of moderate difficulty.
*You will maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
*Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply required expertise in restoring equipment condition and or operation.
*Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
*Must have a thorough knowledge of aircraft repair procedures and replacement of parts.
*Requires broad knowledge of aircraft sheet metal/structural modifications and repair.
*Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
*This job requires working knowledge of technical publications.
*The incumbent receives technical guidance, as required, from supervisor or higher-level technician.
*Will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
*Must be able to prioritize workload to maintain schedules on assigned projects.

Additional Duties may include, but are not limited to:
*Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.
*Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.
*Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.
*Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
*Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
*Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
*A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
*The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
*Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.
*Maintain necessary certifications, licenses and permits as required for assigned work.
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
*Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays.
*Mission requirements and/or workload may require both scheduled and unscheduled overtime.

MUST HAVES:
*Experience with sealing, OR painting, OR shimming of aircraft structure
*Experience with aircraft structural repairs
*Experience using drilling tools and riveting
*Must have experience with major aircraft structural repairs and overhauls
*Must have experience with close tolerance drilling, reaming, removal and installation

Details:
*LOCATION: SAN ANTONIO, TX
*DURATION: 12 MONTHS - POSSIBLY LONGER
*A and P license: 40.00/HR
*Others: 35.00/HR
*Program is offering an assignment completion bonus $5,000
*Program offers a sign on bonus of $5,000 (contingent upon completion/passing of training and PL1 access granted)
*Per diem is authorized for structures mechanics only to the amount of $600/week
*On-boarding – along with the drug and background check, they will need to clear a separate customer requested background check and will be required on their first day to successfully pass a skills test that tests for their competency of using drills, understanding of tolerances, etc.
*Must be US Citizen at birth – no dual citizenship and no prior citizenship
*Must have recent/extensive aircraft experience, specifically as a structural mechanic, or a structural technician. (2 years will not suffice)
 
Job Location: San Antonio, TX
Rate: $35/HR - $40/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/03/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Machinist C

Description:
Chipton-Ross is seeking 2 Aircraft Machinist C's for an opportunity in New Orleans, LA.

RESPONSIBILITIES:
JOB DESCRIPTION SUMMARY
Follows general instructions, reads and interprets complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines. Develops and revises Machine Control Data (MCD) and geometry. Assists the team in resolving issues and completing job responsibilities.

DESIRED COMPETENCIES
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.

Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Innovation / Creativity
Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the teams energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

DESIRED TECHNICAL COMPETENCIES
Adhesive Materials/Processes
Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.

Client Knowledge
Knowledge of Client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Facilities Mfg Processes
Knowledge of manufacturing processes (e.g., machining, fabricating, chemical processing, composites, electrical/electronic) and materials.

General Shop Processes
Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).

General/Precision Test & Meas
Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.

Manufacturing Methods
Knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition and control systems). Ability to select the best method of producing parts, tools or assemblies.

Materials & Processing
Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).

Numerical Control Programming
Knowledge of material removal (e.g. metal machining, composite trimming) and material build up (e.g. composites lay-up) to the Numerical Control (NC) programming lifecycle for complex aerospace hardware. Ability to plan, create, validate, and document machine control data (MCD).

Polymers & Composite Materials
Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

Systems Thinking
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

WORK HOURS: 6:00AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
 
Job Number: 194314
Job Location: New Orleans, LA
Rate: $DOE
Duration: 6 Months
Input Date: 09/09/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic - Structural

Description:
Job Description:

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.

• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.

• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.

• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.

• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.

• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

• Maintain necessary certifications, licenses and permits as required for assigned work.

• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
 
Job Number: 46032-1
Job Location: San Antonio, TX
Rate: $45/hr
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 09/16/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: jorge.garcia@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 40 Aircraft Mechanic II's (Electrical) located in San Antonio, TX.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft electrical systems and electrical components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight control systems, engines, flight deck, routing, terminations, connector building and troubleshooting, applies technical knowledge of aircraft electrical systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as schematics or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft electrical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft repair, must have thorough knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and bond meters. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.
Ability and understanding of routing instructions and handling of harnesses.
Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes.
Adhering to government and company procedural guidance, performs assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work.
Troubleshoots malfunctions in aircraft electrical and comm/nav-systems of moderate difficulty at the organizational or depot maintenance level.
Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. to accomplish assigned work.
Ensure that all equipment is used in accordance with established safety and operating procedures.
Perform all tasks involved in the coordination, preparation, and movement of material and tools.
Operate riding type electric powered elevating equipment to accomplish work assignment.

REQUIRED EXPERIENCE:
Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.
Maintain necessary certifications, licenses and permits as required for assigned work.
Will be required to work with the guidance of more senior skilled employees and assist less senior employees.
Perform all duties of lower Electrical classifications as required to successfully accomplish assignments.
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

EDUCATION:
Accredited High School Diploma or Equivalent

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM
 
Job Number: 193360
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 months
Input Date: 08/25/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 80 Aircraft Mechanic II's located in San Antonio, TX.

RESPONSIBILITIES:
Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.
Use of tooling assemblies and fixtures for depot level modification and repair of structural parts.
A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.
Maintain necessary certifications, licenses and permits as required for assigned work.

REQUIRED EXPERIENCE:
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

Experience working as an aircraft mechanic
Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; Mission requirements and / or workload may require both scheduled and unscheduled overtime)

PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE):

Currently possess an FAA A&P License or Military Technical School equivalent
Computer skills experience including but not limited to: aircraft related systems and basic Microsoft Suite software (i.e. Word, Excel)
Experience reading and understanding engineering drawings, blueprints, schematics, and specifications

EDUCATION:
Accredited High School Diploma or Equivalent

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30PM
 
Job Number: 190853
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 months
Input Date: 05/04/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Structural

Description:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.

• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.

• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.

• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.

• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.

• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

• Maintain necessary certifications, licenses and permits as required for assigned work.

• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
 
Job Number: JPC-1334
Job Location: SAN ANTONIO, TX
Rate: 35-40 HR
Per Diem: YES
Overtime: NO
Duration: 12 MONTHS
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: DIEGO VILLEGAS
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: diego.villegas@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Painter Trainee

Description:
PDS Tech is seeking a Aircraft Prep Trainee for an open position in Savannah, GA.

In your role, you will:

The A/C Prep Trainee works along side higher level employees to assist with the preparation and painting of aircraft. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Assists in the preparation of the exterior surfaces of aircraft for application of primer and topcoat. Use various masking materials to protect windows, external probes, antennas, and other required areas. Sand and wash the aircraft surface as directed. 2. Assist with and applies corrosion preventative materials to the aircraft. 3. Apply primer and sanding surfacer to aircraft. 4. Uses tools to sand primer and sanding surfacer in preparation for base coat. 5. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Use (PTP) to ensure aircraft interior is protected. 

Additional Functions: 1. Properly care for shop equipment and tools as assigned. 2. Comply with Paint shop standard practices. 3. Perform other duties as required. 
 

As our ideal candidate, you will meet the following requirements:
  • A high school diploma or GED.
  • Paint experience in a technical environment or trade school preferred.
  • See Other Requirements in Job Description.


Unique Skills:



  • Must be able to work any shift.
  • Must have valid drivers license.


Other Requirements:
1. Ability to read, write, speak, and understand the English language. 2. Ability to read and interpret blueprints and engineering documentation. 3. Able to pass Pulmonary Function Test to obtain respirator certification. 4. Ability to use tools, equipment, and materials in the aircraft painting process. 5. Able to climb ladders and stairs, perform close tolerance work, work in small spaces, and able to lift up to 40 pounds. 6. Experience may be offset by completion of Technical Certificate in paint and refinishing and/or successful completion in current year youth apprenticeship program, in area of expertise.

 



 

 
Job Number: 2110138366
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/05/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j2jOQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Melbourne, Florida.

Position Overview:

The Aircraft Painter is in charge of aircraft and its sub-assemblies painting and sealing process including surface preparation, masking, and chemicals handling.  This may include limited duties of paint and sealant application.

Job Duties:
Prepare surfaces to be painted or sealed as requested by the working instructions using abrasives, solvents, and brushes.
May perform sealant application assuring compliance with technical and quality requirements.
May assist with application or installation of logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, and patterns.
Ensures the use of appropriate technical references and tools in performing paint and sealing duties.
Perform cleaning and maintenance of all currently used painting or sealing equipment.
Sets up ladders, and scaffolding according to regulations and aircraft requirement.
Ensures all Federal and local environmental and OSHA/TOSHA regulations are complied with.
Basic Qualifications:
Generally 0-3 years of related and recent experience in aeronautical environment.
High School or GED familiar
Knowledge of preparation and painting of aircraft, support equipment, and allied components.
Safety procedures for Chemicals handling.
Knowledge of blueprints and painting diagrams.
Strong ability on paint spraying
Understand technical management and quality assurance procedures.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State, and Federal regulations.
Must be able to be respirator qualified.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a recruiting professional directly, please call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35413
Job Location: Melbourne, FL
Input Date: 10/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Celeste Rodriguez
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Performance Software Developer 3

Description:
Inconen is looking for an Aircraft Performance Software Developer 3 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14929
Job Location: Savannah, GA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 4

Description:
Inconen is looking for an Aircraft Performance Software Developer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14930
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic)

Description:
PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic) for an open position in Coatesville PA

The ideal candidate will:
  • Inspect aircraft and component parts for structural integrity using nondestructive inspection methods.
  • Interpret nondestructive inspection test results and provide information about defects to repair center.
  • Perform nondestructive inspection on structures, components, and systems.
  • Detect flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, and ultrasonic test equipment.
  • Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.
  • Perform the inspection of modification and production aircraft for functional operation and conformance to government and company standards and specifications.
  • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.
  • May perform pre-flight and post-flight inspections in accordance with standard procedure on flight-proven aircraft.
  • May inspect any adjustments, repairs, or modifications made on the aircraft.
  • Must be able to work in confined spaces, elevated platforms for an extended period of time.
  • Must be willing to work off-shifts as required.
  • Must be willing and able to lift 30 lbs.

Basic Qualifications:
  • Documented proof of the minimum requirements for:
    • Level II in Fluorescent Penetrant
    • Level II Eddy Current
    • Level II Ultrasonic in accordance with NAS 410.

  • Basic Excel and MS Word Experience, ability to read blueprints.
     

Desired Skills:

  • Any other level II NAS 410 Qualifications.
  • Airframe and Powerplant Certificate preferred.

 
Job Number: 2110127910
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 05/20/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcwqQAC&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Structural Assembler-Vertical Lift

Description:
Chipton-Ross is seeking 20 Aircraft Structural Assemblers for an opportunity in Mesa, AZ.

RESPONSIBILITIES:
Structural Assembly Technician

Assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems.
Identify nonconforming parts, conditions and manufacturing processes.
Work with engineering to improve manufacturing processes.

EDUCATION:
High School Diploma/Accredited GED.

FULL TIME/VARIABLE SHIFT
WORK HOURS: 5:00AM-1:30PM
Must be available to work 1st or 2nd shift (5am-1:30pm or 1:30-10pm)

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

ADDITIONAL INFORMATION:
Must be available to work 1st or 2nd shift (5am-1:30pm or 1:30-10pm)
Local candidates to Mesa only - onsite role
20 positions
Manager will hire off of resumes
6-12 month long contract
 
Job Number: 192976
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 07/29/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technicians

Description:
STS Aviation Services is hiring Aircraft Structures Technicians in Melbourne, Florida.

Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

Requirements & Information:
Candidates must have 30 months of previous experience on commercial and large regional aircraft with a background of repair/modification/overhaul.
Previous experience performing C checks is preferred.
Comparable military experience is acceptable.
Candidates must have a valid driver's license.
$500 travel allowance for those technicians who qualify; tied to 90-day stay.
$200 referral fee for anyone the candidate refers who stays 60 days.
Authorization:
All candidates must currently be authorized to work in the United States.
About STS Aviation Services:

STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.
 
Job Number: 36451
Job Location: Melbourne, FL
Input Date: 11/05/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Dan Schlink
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Technician Sr

Description:
PDS is seeking an Aircraft Tech Sr  for an open position in Savannah, GA.

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications. 

Principal Duties and Responsibilities:

Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.
7. Coordinate movement of aircraft as required.
8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

Additional Functions:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned.



 

Education and Experience Requirements: 



  • High School Diploma or GED required.
  • 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required. Corporate aircraft experience preferred.
  • FAA Airframe and Powerplant Mechanic Certificate required.
  • Valid Driver’s License required.


Unique Skills:



  • Positions posted for Hangar G any shift as determined by Service Team Manager.
  • *Contractor Hired in this role will go through Service Center Standard Onboarding OJT*


 
Other Requirements:
1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.)
3. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.







 

 
Job Number: 2110138189
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/19/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j2JtQAI&URLSource=cjhunter

Aircraft Technicians Needed

Description:
WE NEED 70 TECHNICIANS TO START ASAP!

Have your friends come with you! Great opportunity with a great aerospace company!

Must have:

5 plus years of experience
Proof of US Persons
Experience working with composite aircraft
Background in one or more of the following: assembly, fabrication, systems, lay-up, build-out, wire harnesses, mechanical, hydraulic and pneumatic systems
A&P preferred, but not required
Per Diem splits available for qualified candidates.

EOE

Job Types: Full-time, Contract

Pay: $32.00 - $43.00 per hour
 
Job Location: Mojave, CA
Rate: 35+
Per Diem: Possible
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Technicians

Description:
STS Aviation Services is hiring Airframe & Powerplant Technicians in Melbourne, Florida.

Hiring Note: These are new, high-profile positions with premium rates. Call 1-800-359-4787 ext. 9189 to speak with a Recruiter directly. Otherwise, please apply online to start the hiring process.

Requirements & Information:
Candidates must have 30 months of previous experience on commercial and large regional aircraft with a background of repair/modification/overhaul.
Previous experience performing C checks is preferred.
Comparable military experience is acceptable.
Candidates must have a current and valid A&P certifications along with a valid driver’s license.
$500 travel allowance for those technicians who qualify; tied to a 90-day stay.
$200 referral fee for anyone the candidate refers who stays 60 days.
Authorization:
All candidates must currently be authorized to work in the United States.
About STS Aviation Services:

STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.
 
Job Number: 36449
Job Location: Melbourne, FL
Input Date: 10/11/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Nicole Taylor
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Website: www.stsaviationgroup.com

Assembler A

Description:
Chipton-Ross is seeking 4 Assembler A's located in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

REQUIRED EXPERIENCE:
- Computer literate
- Must be able to read, write and speak English language

Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.

Safety
Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances

Safety shoes are required.
Completely cover the toes, heels and top of your foot.
Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric,
Heels are less than 2 inches high and have heel base greater than 1 square inch.
Soles are at least " thick

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift

Assignments may require contractors to change shifts and work frequent overtime.

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 190706
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 04/19/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Assembler A

Description:
Chipton-Ross is seeking an Assembler A for an opening in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

ADDITIONAL REQUIREMENTS:
- Successful completion of initial/ongoing training is a requirement/contingency for continuing assignment.
- Approved safety glasses (or more protective eyewear) must be worn in all indoor factories, operations, manufacturing or production areas, including aisle ways, except for designated Safety Zones or if conditions are met for special circumstances
- Safety shoes are required. Completely cover the toes, heels and top of your foot. Made of sturdy material that resists abrasion, e.g. leather; faux leather; or woven fabric, Heels are less than 2 inches high and have heel base greater than 1 square inch. Soles are at least " thick

EDUCATION:
Accredited High School Diploma/GED

FULL TIME/WORK HOURS:
Contractors must be able to work and support all shifts to meet business needs. 1st, 2nd or 3rd shift. Assignments may require contractors to change shifts and work frequent overtime.

ADDITIONAL REQUIREMENTS:
Eye exam required
 
Job Number: 193034
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 08/29/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Assembler D

Description:
Chipton-Ross is seeking a Assembler D for an opening in San Antonio, TX.

RESPONSIBILITIES:
Supporting 737 program.

1. Perform production installations, maintenance*, preventative maintenance** and alterations*** on aircraft structure, systems and sub-systems, including electrical and avionics on standard or experimental certificated aircraft. Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

2. Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures. Perform functions such as: Customer/FAA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. May perform Aviation Maintenance Technician tasks in order to obtain and maintain knowledge, skills and required certifications.

ASSOCIATED DUTIES AND RESPONSIBILITIES:
Use technical specifications, sketches, manuals, drawings, engineering instructions and FAA forms and publications to accomplish work assignment.
Maintains Company and FAA required records and inspection forms.
Maintain a safe, clean and organized work environment.
Plan and organize the sequence of your own work package in such a way as to promote safe, efficient operation and meet predetermined schedules in a timely manner.
Operate any and all types of information systems required to perform assigned tasks. Including but not limited to Company WEB based systems and Microsoft Office products.
Interpret and perform to the requirements of airworthiness directives, service bulletins, service letters and other approved/accepted data.
Apply applicable mathematical calculations to setup and use precision measuring tools, to measure gaps, heights, angles, hole diameters and depths.
Maintain necessary certifications, licenses and permits as required for assigned work.
As assigned, exchange information with suppliers, customers or other company representatives to explain or demonstrate operations, tests or difficulties.

PREFERRED EXPERIENCE:
737 field experience (preflight/post flight) with an avionics background proficient in testing/troubleshooting. Previous engine run experience on CFM type engines and/or flight line experience with an airline/military.. A&P license.


EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 5:30 AM - 2:30 PM

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

ADDITIONAL REQUIREMENTS:
Candidates selected will attend a 3 week training course prior to working the floor.
 
Job Number: 191111
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 Months
Input Date: 05/06/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Autoclave Operator Tech II

Description:
PDS is seeking an Autoclave Operator Tech II for an open position in Tulsa, OK

Position Purpose:



In a team oriented work environment, under moderate supervision assists with the set up and operation of autoclaves and auxiliary equipment to cure and bond metallic, fiberglass and carbon fiber aircraft parts in a production environment. 


Essential Functions:



  • Basic set up and operation of autoclaves and auxiliary equipment to cure and bond metallic and nonmetallic aircraft parts and assemblies according to Gulfstream specifications.
  • Reads and interprets electronic travel documents and related paper work
  • Assists with the selection of parts and assemblies for simultaneous bonding, based on similarity of processing requirements and autoclave capacity.
  • Assists with the arrangement of bonding racks and tools containing parts and assemblies and strategically loads and positions racks in autoclaves. 
  • Connects thermocouples and vacuum lines to fittings on parts and ports and thermocouple plugs inside the autoclave.
  • Populates and confirms required part number, thermocouple and vacuum port information into autoclave computerized operating system.
  • Adjusts manual controls and/or enters commands into computerized operating system to regulate and activate autoclave power supply, cooling system, vacuum, heat and pressure gauges and recorders.
  • Monitors instruments, switches, and recorders and listens for warning signals during autoclave operation to ensure conformance to specifications.
  • Maintains a neat and orderly work area, supports the company FOD and 5S program, and complies with all safety regulations.
  • Retrieves lay-up tools from tool storage and preps, releases and places tools in bond room for lay-up operation.
  • Break down and cleaning of tools containing cured parts.
  • Storing of cleaned tools in specified storage area. 
  • Ensures that parts, lab samples, and related paper work are processed and taken to proper location. 



Education and Experience Requirements:




  • High School diploma or GED.
  • Two (2) years related autoclave operational experience.


Other Requirements:
1. Must have a basic knowledge of computers and related operational systems.
2. Must have valid drivers license to obtain GAC cart and forklift license.
3. Must possess and use a Q-Stamp to include all approved processes associated with autoclave operations. New hires will be required. to obtain a Q-Stamp and should have autoclave certification within twelve (12) months.
4. Must be able to read and interpret blue prints.
5. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6 scale, 1 micrometer, 6 dial caliper.
6. Must have good operational understanding of overhead cranes, forklifts and electric tow mules and all other tools required. to perform the job.
7. Must have basic ability to read, comprehend and implement Gulfstream manufacturing procedures as well as the mathematical ability to calculate autoclave run times, appropriate temperature/pressure settings and expiration date and times for parts being bonded.

 
Job Number: 2110139890
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 09/16/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j8jwQAA&URLSource=cjhunter

Aviation Wire Harness Design - Mentor Graphics

Description:
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704

TSC is an AA/EOE.
 
Job Location: Manassas, VA
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Avionic, Structural or Mechanical Helicopter Technicians (2nd shift)

Description:
PDS Tech is seeking Avionic, Structural or Mechanical Helicopter Technicians (2nd shift) for open positions in Owego NY

Selected individuals will be responsible for Aircraft Installations and Testing in support of the VH-92A Helicopter program. This is a Second Shift Position.  Looking for Individuals with Structural, Avionics, and/or Mechanical Backgrounds.



To be qualified to interview for this role, you will need to possess these basic qualifications:

  • Aviation experience required (A&P certificate highly preferred)
  • Able to work in a team environment
  • Ability to adapt to changes
  • Familiarity with S-92 Airframe or Other Sikorsky Platforms
  • Experience with Helicopter Flight Controls & Dynamic Components

Desired Skill pertaining to this role have to do with familiarity / experience of the following type of responsibilities:
  • Performing Production Modifications to base aircraft
  • Performing Standard Aviation Maintenance
  • Installation of Antennas and Avionics Racks, Running Aircraft Harnesses
  • Installing/Integrating equipment using approved drawings, manufacturing aides / tooling, and technical manuals
  • Performing system testing using documented Acceptance Test Procedures (ATPs)
  • Documenting work order progress per/within Solumina / SAP
  • Documenting maintenance actions using approved government and LM procedures and paper forms
  • Enforce security procedures for working in a classified area at all times
  • Compliance with all Safety and FOD elimination policies


Physical Demands:

  • The position requires long periods of stand, walk, climb or balance, stoop, kneel, crouch or crawl, and detect gasses or fuel leaks
  • Basic Computer Skills Required. (Outlook, Word, Excel)
  • Position requires ability to lift 40lbs

 
Job Number: 2110128758
Job Location: Owego, NY
Duration: 7 months
Input Date: 08/02/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PfBqQAK&URLSource=cjhunter

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Engineer

Description:
Are you known for your attention to detail and pride yourself in being a responsible Avionics Engineer? Join our team and take your career to new heights!

Principal Duties and Responsibilities:
*Avionics and/or Electrical system development and integration experience is required.
*Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
*Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
*Understanding of DO-160, DO-178 and DO-254 processes is preferred.
*System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
*ARP-4754A experience including requirements development, validation and verification is preferred.
*Experience with IBM DOORS or other requirements management database is preferred.

Unique Skills:
*Requirement validation Including Tracing, Rationale and Technical Supplier Coordination for ARP4754A Artifacts
*Completeness and Correctness per Regulatory and Gulfstream Processes
*System Integration with Integrated Modular Avionic Platforms
*Verification (Testing) Including Lab and/or Aircraft Troubleshooting
*System Knowledge Needed Over Wiring Design

Education and Experience Requirements:
*Bachelor’s degree in aerospace, mechanical, industrial or manufacturing engineering
*Background in the aerospace industry preferred.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Savannah, GA
Rate: $80/HR-$89.76/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/05/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

Avionics Engineer

Description:
The Avionics Engineer reports to the Manager, Avionics Engineering and is responsible for the engineering data,
instructions, documents, and technical support that economically ensures the safety, airworthiness, and reliability of aircraft within the following ATA chapter subjects: 22, 23, 24, 26, 28, 31, 33, 34, 45, 46, 77.

Responsibilities:
1. Issue instructions (EO’s) and documents to economically support operations and return aircraft to service in a
safe, airworthy, and timely manner.
2. Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for
repairs, alterations, and modifications.
3. Report on the status of projects and issues as directed.
4. Update technical source documents as applicable to insure accuracy.
5. Support integration of new and previously operated aircraft.
6. Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside
engineering departments; regulatory personnel; and other outside agencies.
7. Participate in industry working groups, industry steering committees, industry meetings, and conferences.
8. Review work of consultant, contract, and MRO Systems Engineers.

Key Objectives (Metrics):
1. Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness
Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues.
2. Develop product improvement modifications as directed by Reliability Indicators.
 
Job Number: 87451200
Job Location: KY
Rate: Direct Salary
Duration: Perm work
Input Date: 07/13/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Avionics Engineer

Description:
Inconen is looking for an Avionics Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Requirement validation Including Tracing, Rationale and Technical Supplier Coordination for ARP4754A Artifacts.
-Completeness and Correctness per Regulatory and Gulfstream Processes.
-System Integration with Integrated Modular Avionic Platforms.
-Verification (Testing) Including Lab and/or Aircraft Troubleshooting.
-System Knowledge Needed Over Wiring Design.

General Skills:
-Avionics and/or Electrical system development and integration experience is required.
-Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
-Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
-Understanding of DO-160, DO-178 and DO-254 processes is preferred.
-System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
-ARP-4754A experience including requirements development, validation and verification is preferred.
-Experience with IBM DOORS or other requirements management database is preferred.
 
Job Number: 16996
Job Location: Savannah, GA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/05/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
• Requirement validation Including Tracing, Rationale and Technical Supplier Coordination for ARP4754A Artifacts
• Completeness and Correctness per Regulatory and Gulfstream Processes
• System Integration with Integrated Modular Avionic Platforms
• Verification (Testing) Including Lab and/or Aircraft Troubleshooting
• System Knowledge Needed Over Wiring Design

General Skills:
• Avionics and/or Electrical system development and integration experience is required.
• Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
• Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
• Understanding of DO-160, DO-178 and DO-254 processes is preferred.
• System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
• ARP-4754A experience including requirements development, validation and verification is preferred.
• Experience with IBM DOORS or other requirements management database is preferred.
 
Job Number: 24-613
Job Location: Savannah
Input Date: 10/05/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Avionics Engineer

Description:
• Requirement validation Including Tracing, Rationale and Technical Supplier Coordination for ARP4754A Artifacts
• Completeness and Correctness per Regulatory and Company Processes
• System Integration with Integrated Modular Avionic Platforms
• Verification (Testing) Including Lab and/or Aircraft Troubleshooting
• System Knowledge Needed Over Wiring Design

General Skills:
• Avionics and/or Electrical system development and integration experience is required.
• Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
• Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
• Understanding of DO-160, DO-178 and DO-254 processes is preferred.
• System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
• ARP-4754A experience including requirements development, validation and verification is preferred.
• Experience with IBM DOORS or other requirements management database is preferred.
 
Job Number: 24-613
Job Location: Savannah, GA
Rate: $65-$89/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/15/2021
Last Updated: 11/16/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Avionics Installer I

Description:
PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 

 

Education and Experience Requirements: 



  • High School diploma/GED.
  • General knowledge of applicable regulatory requirements and customer specifications.
  • Must know how to use a multimeter.
  • Entry level position.
  • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.


Unique Skills:



  • Must be able to use Avionics/Electrical hand tools.



Other Requirements:
1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Strong written and verbal skills required.
4. Computer skills and general software knowledge necessary.


 
Job Number: 2110139135
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/06/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j5wIQAQ&URLSource=cjhunter

Avionics Installer Sr.

Description:
PDS Tech searching for a qualified Avionics Installer Sr. in Savannah, GA

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions: 1. Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. 2. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 3. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways 4. Assists Engineering in resolving problems and makes repairs per engineering direction. 5. Maintains required logs and records. 6. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. 7. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. 8. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Coordinate shift changes in team leaders absence. 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) 4. Assists and fills in for team coordinator as required. 5. Performs other duties as assigned. 

 

Education and Experience Requirements:
High School diploma/GED.
Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field.
Ability to read and interpret blueprints and schematic diagrams.

 

Unique Skills:



Understanding of aircraft wiring drawings



Other Requirements:
1. Possess a working knowledge of the Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications.
2. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule.
3. Strong written and verbal skills required.
4. Computer keyboard skills necessary.

 


 
Job Number: 2110136065
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/20/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Q0TxQAK&URLSource=cjhunter

Avionics Systems Engineers with DOORS, V&V, DO-160

Description:
Contract-Avionics/Power Engineer-REQ#167670 in Savannah, GA
Skills:
Avionics and/or Electrical system development and integration experience is required.
Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
Understanding of DO-160, DO-178 and DO-254 processes is preferred.
System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
ARP-4754A experience including requirements development, validation and verification is preferred.
Experience with IBM DOORS or other requirements management database is preferred.
====================
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: Savannah, GA
Rate: $65-75/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 05/11/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Avionics Technicians (A&P or FCC License) - 1st shift

Description:
PDS Tech is seeking Experienced Avionics Technicians with their A&P or FCC License for open positions in Coatesville PA

The ideal candidate will:

  • Correctly manufacture, route, install, and repair electrical wiring to Engineering Drawings and Standards.
  • Read and interpret wiring diagrams and relevant Maintenance Manuals to install and test avionics and Helicopter Systems equipment as assigned
  • Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams
  • Properly build and accomplish final installs of complex wiring harnesses to Engineering Drawings and Standards.
  • Perform routine continuity and power checks to ensure harness integrity.
  • Troubleshoot electrical and avionics system on board aircraft and make necessary adjustments or repairs as assigned.
  • Route and clamp multiple wiring harnesses through airframe structure to both picture and Standards.
  • Ensure strict compliance with the Tool Control Program.
  • Comply with and participate in the FOD Program

Required Skills
  • Ability to Read and interpret schematic, technical drawings, and wiring diagrams.
  • Proficient in the use of avionics tools to include insertion/removal tools correct crimpers.  Must be able to select proper pins, crimp tools, removal and insertion tools for proper terminations of wiring connectors.
  • Strong Communication skills; written and verbal
  • Must be Detail Oriented and able to Multi-Task
  • Strong problem solving and evaluation skills


Education & Experience

  • High School Diploma or equivalent (required)
  • Technical School Certification or equivalent (required)
  • Valid A&P and/or FCC license (preferred)
  • 3 – 5 years recent experience minimum


Requirements

  • This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
  • Must be a US citizen or Permanent Resident Alien
  • Must have the ability to speak, read, and write English language
  • Be capable of working overtime and any assigned shift.
  • Be capable of lifting a minimum of 25 lbs.


 
 
Job Number: 2110129988
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 04/27/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PicYQAS&URLSource=cjhunter

Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Avionics/Electrical Engineer (Contract)

Description:

PDS is looking for an Avionics Electrical Engineer in Wichita, KS:



In your role, you will:
• Review certification plans
• Write development and certification test procedures (Test Definition Sheets)
• Plot and analyze ground and flight test data
• Create flight test reports containing data demonstrating proper system operation as required by TC/FAA/EASA Regulations
• Assist technicians in troubleshooting aircraft avionics system problems
• Create development engineering documentation for design changes, in a flight test environment
• Provide system performance analysis to ensure proper operation as per the design specification

 

Qualifications
As our ideal candidate,
• You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in Avionics systems design, testing and/or certification OR a minimum of 12 years’ experience if no degree.
• You must have previous experience of supporting aircraft ground, flight, and functional testing
• You have a working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems (preferred)
• You must have a good working knowledge of FAA & EASA Part 25 certification requirements.
• You must have working knowledge of RTCA documents DO-178 and DO-160.
• You must have the ability to interpret software documentation including logic diagrams related to avionics systems.
• You must have experience with utilizing ARINC data to isolate faults related to system controls software.
• You will demonstrate good teamwork and English communication skills, both oral and written, and be PC literate.
• You will demonstrate interpersonal skills necessary to establish and maintain effective working relationships with co-workers, employees, management and suppliers.
• You must be self-motivated, able to coordinate multiple activities and manage time effectively.

 

 
Job Number: 2110130725
Job Location: Wichita, KS
Duration: 12 months
Input Date: 05/07/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pkr4QAC&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



 



Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Unique Skills:



  • Experience with aircraft troubleshooting 

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.



 



 



 

 
Job Number: 2110136339
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/03/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iwPjQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



 



Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.



 



 



 

 
Job Number: 2110138055
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/30/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j1mKQAQ&URLSource=cjhunter

Avionics/Electrician Mechanic

Description:
PDS Tech, Inc. is seeking candidates for an Avionics Electrician/Mechanic position in Mobile, AL. 

Position Summary:



To conduct, maintain, test and repair electrical/electronic systems and components in accordance with the repair stations, FAA's and manufacturer's airworthiness and maintenance standards. This position is "safety sensitive"; therefore all FAA required compliance will be followed.



Primary Responsibilities:



  • Perform all maintenance in accordance with FAA approved data and to the standards of good workmanship as required by the Company
  • Keep safety of flight in the forefront at all times in the production of an airworthy product.
  • Perform routine or special maintenance inspections to prevent failure of aircraft electrical and avionics systems and components; perform complete operational and functional checks on navigation, communication and flight control systems including instrumentation and pitot static installations, etc.
  • Fabricate wiring harnesses, installs/modifies avionic and electrical systems.
  • Determine when a component should be repaired or replaced; decide necessary repair schemes and quantity and type of parts needed to accomplish proper repair.
  • Follow approved maintenance procedures, consulting internal procedures and technical data FAA approved.
  • Perform serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Complete work package documentation with sign off after finishing all designated operations.
  • Perform installation of avionic equipment.
  • Interpret avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
  • Adjust, repair, or replace malfunctioning components or assemblies, using hand tools and soldering equipment.
  • Install electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering equipment.
  • Interpret flight test data to diagnose malfunctions and systemic performance problems.
  • Set up and operate ground support and test equipment to perform functional test of electrical and electronic systems.
  • Troubleshoot, repair, rework, and modify worn or defective assemblies, components or systems.
  • Suggest improvements to processes and procedures.
  • Satisfy work schedule requirements.
  • Plan and perform work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment.
  • Advise operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components.
  • Inform appropriate management and line mechanics of potential electrical/ mechanical problems and inherent dangers involved.
  • Perform preventive maintenance functions as directed.
  • Assist maintenance personnel with technical troubleshooting.
  • Assist and train other maintenance and/or other technical level employees.
  • Maintain all hangar and shop tools and equipment in a serviceable condition.
  • Ensure assigned work area is kept clean and free of hazards to both personnel and the aircraft.
  • Follow all necessary safety precautions; hearing and eye protection, use of chemicals, engine and propeller hazards, fall protection, etc.
  • As a "safety sensitive" position, this position requires that the employee be able to work in a constant state of alertness and safe manner as an essential job function.
  • Comply with OSHA Safety Regulations.
  • Participate in on-the-job training as required.
  • Observe safety procedures and personnel policies.
  • Regular attendance required as outlined in company policy.


 


Additional Responsibilities:



Education:


 

  • Certified by FAA with a current Airframe and Power Plant license is preferred.
  • FCC 2nd Class License preferred
  • 3-5 years of proven experience in the electrical/electronics, and the ability to demonstrate proficiency in these areas.
  • Proficiency with interpretation of avionic/electrical wiring diagrams, wire identification, harness fabrication, cables, fittings, circuits and connectors.
  • Thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes.
  • Ability to inspect and install digital avionics equipment.
  • Ability to work quickly and efficiently while ensuring quality work.
  • While performing the duties of this position, the employee is regularly required to stand; use hands and fingers to handle or feel, talk or hear and have good visual abilities.
  • Will often be required to sit, climb or balance and work in close quarters.
  • Must be able to work well with all levels of personnel whether individually or in a team environment.
  • High degree of precision working with minimum tolerances required.
  • Must be safety conscious at all times.
  • Able to lift or help lift up to 50 lbs.
  • Note: Noise level may be loud at times.
  • Previous experience on turbo prop aircraft preferred.
  • Must understand, read and write proficiently in the English language to read and understand appropriate manuals, schematics, and technical information necessary to adequately perform duties.


Experience:



  • Prior avionics experience is required.
  • Prior experience in aircraft maintenance required.
  • Familiar with turbo prop aircraft is a plus.


Licensure/Certifications:



  • Certified by FAA with a current Airframe and Power Plant Mechanic license is a plus.
  • FCC license is not required; but is a plus.


Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):



  • English language is required; bilingual in Spanish is not required, but is a plus.


Travel Required:



  • 10% Potential Domestic and International travel


Eligibility:



  • Authorized to Work in the US


Physical Requirements:



Sitting, Standing, Squatting/Kneeling, Walking, Speaking, Hearing, Vision, Manual Dexterity, ability to work in somewhat confined spaces.



Special Requirements:



This role will require participation in a rotating shift schedule approximately every three months to work the following shifts:



1st shift - 5:00 AM - 3:30 PM



2nd Shift - 3:30 Pm - 2:00 AM


 
Job Number: 2110140163
Job Location: Mobile, AL
Duration: 6 months
Input Date: 09/23/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j9vPQAQ&URLSource=cjhunter

Avionics/Structural Aircraft Mechanic (Interim Secret or Secret)

Description:
PDS Tech is seeking an Avionics/Structural Aircraft Mechanic for an open position in Patuxent River MD.  An Interim Secret or high security clearance is required

The ideal candidate will perform maintenance of flight test instrumentation for flight test programs.  They must be able to read and understand technical drawings, basic electronic wiring practices, basic electronic systems operations, and mechanical assembly of electronic components.



The candidate must be able to execute electrical (AVIONICS) / structural (MECHANIC) modifications with minimal supervision on multiple VH-92A aircraft.


The candidate may be required to maintain, troubleshoot, repair and service aircraft and engine systems, and perform other ad-hoc maintenance.

The candidate will be required to work alongside SAC Quality Leads to review/accept work and make appropriate aircraft log entries.

The candidate must be able to:
  • Follow and work to aircraft schematics, prints, and/or other approved technical publications. 
  • Have a comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation or manufacturers' manuals.  


Support may include:

  • Disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective parts on or off aircraft.
  • Adjusting, repairing, or replacing structures/ systems and aircraft components, systems, or accessories.
  • Perform other duties as requested to support overall contract effort or customer Aviation maintenance support.


Shift coverage will vary based on business requirements
Required Skills:
  • Minimum of 5+ combined years of rotary maintenance experience on the S-92 or other client product variants
  • Interim Secret or high-security clearance required.
  • Shift coverage will vary based on business requirements

 
Job Number: 2110137715
Job Location: Patuxent River, MD
Duration: 3 months
Input Date: 08/25/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j0qLQAQ&URLSource=cjhunter

Avionics/Power Engineer

Description:
Inconen is looking for an Avionics/Power Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Avionics and/or Electrical system development and integration experience is required.
-Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
-Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
-Understanding of DO-160, DO-178 and DO-254 processes is preferred.
-System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
-ARP-4754A experience including requirements development, validation and verification is preferred.
-Experience with IBM DOORS or other requirements management database is preferred.

Education:
-Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Other Requirements
-Advanced degree in engineering related field preferred.
-The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 15265
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/11/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

CREO Aircraft Structures Mechanical Engineers and Designers

Description:
Looking for CREO degreed and non degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
 
Job Number: PL CREO
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 10/01/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Cabinetmaker Sr

Description:

PDS is seeking a Cabinetmaker Sr for an open position in East St. Louis, MO.

Will work under general supervision and fabricate complex cabinets and other wood-surfaced sub-assemblies for installation in aircraft.
As Sr Cabinet Maker, will also be responsible for assisting and training to co-workers. 

Essential Functions:

  1. Fabricates complex high quality furniture and other wood-surfaced sub-assemblies using stationary and hand held-tools.
  2. Interprets material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements with a high level of quality and detail. Coordinates with supervision to ensure compliance with customer approved design samples.
  3. Utilizes a variety of woodworking tools and techniques.
  4. Complies with and champions safety, 5S, and housekeeping policies and ensures the protection of aircraft interiors.
  5. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
  6. Utilizes the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions:

  • Accepts Lead responsibilities when required. Mentors and trains lesser skilled technicians.
  • Oversees projects and coordinates with Lead to delegate tasks to assigned technicians.
  • Conducts safety audits and assists team members in doing safety audits.
  • Assists in maintaining shop equipment and associated JSAs.
  • Coordinates with other backshops when necessary.
  • Adapts to sudden schedule changes.
  • Performs other duties as required.


Education and Experience Requirements:



  • Must be able to work any shift and work overtime as needed.
  • High school diploma/GED.
  • Advanced knowledge of cabinetmaking processes and products.
  • Four (4) years of experience in cabinetmaking.
  • Experience in aerospace industry preferred.
  • Possess a working knowledge of inspection and process specifications preferred.

Other Requirements:

  • Demonstrates excellent communication skills, both verbal and written.
  • The ability to read, write, speak, and understand the English language.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate..


 



 

 
Job Number: 2110139442
Job Location: East Saint Louis, IL
Duration: 6 months
Input Date: 09/17/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6rTQAQ&URLSource=cjhunter

Certification Engineer

Description:
The position will be responsible for showing compliance to FAA regulations by following Certification Organization Designation Authorization (ODA) Procedures, FAA Order 8100.15 and FAA Order 8110.4 to prepare data packages for aftermarket Supplemental Type Certificates (STC’s). This position exercises independent judgment with regard to the resolution of problems and interaction with internal and external departments, outside vendors, subcontractors and consultants, ODA Unit Members (UM’s) and customers.


PRIMARY RESPONSIBILITIES INCLUDE:
• Understand, plan and execute certification activities in accordance with Engineering policies, procedures, work instructions, customer specific requirements and FAA guidance.
• Interfaces and communicates with Program Management, Engineering, ODA administrator, UM’s and ODA Staff, all branches of the FAA, and customers as necessary. Provides certification guidance and or interface to and or their subsidiaries when necessary.
• Manage the STC project by providing work estimates, tracking progress according to schedule, coordinating with the Program Manager and Project UM’s, and supporting technical discussions with customers.
• Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
• Develop, edit and contribute to reports supporting certification activities such as FAA Project Specific Certification Plans (PSCP), Conformity Inspection Plans (CIP), Project Notification Letters (PNL), Requests for Conformity (RFC), Type Inspection Authorizations (TIA), Compliance Reports, etc.
• Coordinates with Engineering and/or UMs for the preparation of all substantiating documents required to show compliance with appropriate 14 CFR Parts per project Compliance Checklist, including but not limited to structural compliance documents, electrical substantiation, electrical load analysis, test plans, test reports, Instructions for Continued Airworthiness (ICA), etc.
• Review substantiating documents such as test plans, reports, analyses, drawings, etc., to ensure they agree with requirements outlined in the PSCP.
• Responsible for tracking, evaluating and incorporating incoming comments from the FAA and UMs.
• Responsible for populating and maintaining certification status and comments to the project Rolling Action Item List (RAIL) specific to each project.
• Responsible to obtain FAA approvals (8100-9, 8110-3) from Certification ODA UMs for compliance documents and ensure all 14 CFR Regulations are 100% accurately indicated, and 100% in agreement with the associated Compliance Checklist and the document being approved.
• Responsible for final file cleanup (both paper and electronic copy) of all certification and technical data before each project is closed and submitted to the ODA.
• Oversees preparation of, and audits the certification project close-out packages, prior to submittal to the ODA administrator.
• Coordinates with foreign certification agencies regarding validation efforts on FAA issued STCs.
• Performs maintenance and updates of electronic project files.
• Provide certification support and expertise to Business Development activities as required; including certification guidance and input for development of Statement of Work and Bid Packages.
• Will be involved in continuous improvement efforts and development of ways to become more efficient while maintaining high standards and meeting FAA/ODA requirements.
• Other duties as assigned.
job descriptions are meant as summarizations only. They do not necessarily reflect all duties and responsibilities of a position.

ESSENTIAL FUNCTIONS:
• Minimum physical requirements to perform all duties and responsibilities, as defined by management
• A wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered
• Ability to perform with minimal supervision. Work may be performed without established procedures
Note. Ability to obtain/maintain a security clearance may be required

EDUCATION/EXPERIENCE REQUIRED:
Job Title Typical Experience
Certification Engineer I 0 - 2+ Years
Certification Engineer II 3+ Years
Senior Certification Engineer I 6+ Years
Senior Certification Engineer II 8+ Years
• BS/BA in engineering discipline or equivalent experience
• A solid understanding of 14 CFR, Parts 21, 23, 25, experience with Parts 27 and 29 a plus
• 6+ years of experience in FAA aircraft certification activities
• Strong knowledge and understanding of the FAA certification process
• Experience with STC certification development in a repair station, MRO or another ODA
• Technical writing experience required
• Effective interpersonal skills within an engineering environment influencing the success of a program
• Must have excellent written and oral communication skills and the ability to motivate others
• Must be able to think quickly and make sound decisions in regards to aircraft issues
• Must be a self-starter, solution focused, with a positive attitude
• Familiar with commercial technical publications, requirements, and processes
• Familiar with computer-aided design and drafting packages
• Proficiency in intranet/internet environment and Windows operating systems is required
• Proficient with MS Office and MS Project or related project tracking system





The Structures Company LLC is an AA/EOE
 
Job Number: 520
Job Location: Wichita, KS
Rate: $60/Hr.
Per Diem: Yes
Overtime: No
Duration: 6 months to 1 Year
Start Date: ASAP
Input Date: 11/04/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Claims Administrator

Description:
PDS Tech is hiring a Claims Administrator for Greensboro, NC!

You will be in frequent contact with domestic and international customers, dealers and service centers to review and adjudicate customer claims, ensure timely resolution of issues, and administer monthly invoicing for aftermarket programs. You will work closely with other teams within Honda Customer Service to ensure customer satisfaction and support company objectives.

  • Review and adjudicate customer warranty and program claims in accordance with contract coverage and policies.
  • Make authorized financial decisions and credit assessments in accordance with company policies.
  • Collect, document, and evaluate claim data to build and update the labor catalog.
  • Support internal teams by building requested reports using claim and aircraft utilization data.
  • Assist customers in accessing the web portal to file claims, report aircraft and engine usage, and navigate maintenance manuals.
  • Assist customers with understanding warranty and aftermarket program coverage.
  • Facilitate program invoicing and work closely with Finance.
  • Provide feedback and ideas for system improvements; assist with testing of system updates and new features.


 
  • You have 3+ years of experience in Customer Service and an Associate’s degree or a minimum of 5+ years related experience.
  • Multilingual skills, parts catalog/blueprint review experience, SAP experience, and knowledge of the aviation industry and aircraft parts terminology are strongly preferred but not required.
  • You have a background in preparing, analyzing, and administering contracts.
  • You enjoy working in a team environment with taking ownership of specific tasks in support of company goals and success.


 

 
Job Number: 2110129859
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 09/13/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beard
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PiKxQAK&URLSource=cjhunter

Completions Electrical Systems Design Engineer, Completions - Eng. Contractor 4

Description:
Inconen is looking for a Completions Electrical Systems Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Proficient in System level Wire Diagram/Schematic design for aircraft.
Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
Ability to complete system level ELA (Electrical Load Analysis).
Ability to develop or decipher technical and test specifications.
Knowledge of 14 CFR 25 Subpart H - EWIS based design.
Knowledge of Catia V5.
Part 25 Certification experience for cabin interiors preferred.
Familiarity with aircraft STC procedures preferred.
Makes technical decisions and provides recommendations demonstrating leadership authority.
Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15573
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Completions Engineer - Contractor 2

Description:
Inconen is looking for a Completions Engineer - Contractor 2 for our client, a well-known Aerospace Company, in Dallas, TX.

**Candidates must be a U.S. Citizen or Permanent Resident**

Duties:
The ability to draw, release and maintain completions engineering interior and exterior drawings for customer completions aircraft using Catia/AutoCAD. Provide the necessary support to the back shops, completions sales teams to effectively communicate design intent and clarify designs for building process

Skills and Competencies:
Must be able to independently and effectively work in AutoCAD/Catia and to be able to draw and maintain the interior / exterior shop drawings. You must be able to utilize Catia and Smarteam to create interior parts for review and creation in the shops. The exterior marking drawings require the ability to work in Adobe Photoshop, Adobe Illustrator and Adobe InDesign and to extract the graphics to be translated into an AutoCAD format. Some interior information may need to be communicated to internal/external customers through Microsoft Office software (i.e., Word, Excel, Acrobat and PowerPoint…).

Education and Experience Requirements:
Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower-level engineering staff.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principle Duties and Responsibilities:
Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
3. Perform other duties as assigned.
 
Job Number: 17044
Job Location: Dallas, TX
Rate: $42.00 - $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/12/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Engineering Contractor 2

Description:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

Education and Experience Requirements:
• Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
• 18 months of related Engineering experience.
• Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Unique Skills:
• Duties:
o The ability to draw, release and maintain completions engineering interior and exterior drawings for customer completions aircraft using Catia/AutoCAD.
o Provide the necessary support to the back shops, completions sales teams to effectively communicate design intent and clarify designs for building process
• Skills and Competencies:
o Must be able to independently and effectively work in AutoCAD/Catia and to be able to draw and maintain the interior / exterior shop drawings.
o You must be able to utilize Catia and SmarTeam to create interior parts for review and creation in the shops.
o The exterior marking drawings require the ability to work in Adobe Photoshop, Adobe Illustrator and Adobe InDesign and to extract the graphics to be translated into an AutoCAD format.
o Some interior information may need to be communicated to internal/external customers through Microsoft Office software (i.e., Word, Excel, Acrobat and PowerPoint…).

Essential Functions:
• Solves typical engineering problems within assigned discipline
• Provides technical assistance to engineering staff and contributes to completion of project milestones
• Responsible for a complex engineering assignment, or a full project of lesser complexity
• Follows established schedules while developing plans for engineering assignments
• Obtains appropriate level of supervisor approvals for work accuracy and adequacy
• Proficiently applies company/organization policies and procedures

Additional Functions:
• Actively works to improve daily processes, and ensures all work meets customer requirements
• Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
• Perform other duties as assigned.

Other Requirements:
• The level of technical skills and abilities appropriate for this grade will be established by each discipline.
• Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
• Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
• Ability to convey technical concepts in both written and verbal formats.
• Contacts are primarily within the organization, with occasional customer contacts on routine issues.
• Works under general supervision for routine tasks of minor complexity.
• With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 24-619
Job Location: Dallas, TX
Rate: $42-$52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/12/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Completions Mechanical Design Engineer, Completions - Eng. Contractor 4

Description:
Inconen is looking for a Completions Mechanical Design Engineer, Completions - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
Proficient in Catia V5
Proficient in Smarteam
Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
Experience of routing plumbing on various monuments
Electrical Harness Installation (EHI) experience also a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15574
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Stress Analysis, Interior Furnishings

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
Candidate will be performing structural analysis of company interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following:
• Use of finite element analysis for both primary and secondary structures required. Working knowledge of FEMAP required.
• Experience performing structural analysis on interior furnishing is preferred.
• A good understanding of a fast paced completion-style environment
• Primary structures experience preferred. MRB experience is preferred.
• Experience working with company delegated structural AR's/DERs in an ODA environment in support of new and unique STC certification of aircraft installations preferred

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-614
Job Location: Savannah, GA
Rate: $65-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/06/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Completions Stress Analysis, Interior Furnishings - Engineer

Description:
Are you known for your attention to detail and pride yourself in being a responsible Engineer? Join our team and take your career to new heights!

Position Purpose:
*Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Principle Duties and Responsibilities:
*Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
*Is consulted extensively by associates and others as a recognized authority within the field
*Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
*Approach to problem solving balances technical product, cost and schedule
*Works without appreciable direction; work is reviewed from a long-range perspective for desired results
*Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
*Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
*Perform other duties as assigned.
*Advanced degree in engineering, or related curriculum preferred

Unique Skills:
*Candidate will be performing structural analysis of interior monuments using FEA and classical hand analysis.
*Responsibilities will include both the analysis and certification documentation.

The ideal candidate will have experience in the following:
*Use of finite element analysis for both primary and secondary structures required. Working knowledge of FEMAP required.
*Experience performing structural analysis on interior furnishing is preferred.
*A good understanding of a fast paced completion-style environment
*Primary structures experience preferred.
*MRB experience is preferred.
*Experience working with company delegated structural AR's/DERs in an ODA environment in support of new and unique STC certification of aircraft installations preferred

Education and Experience Requirements:
*Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
*Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Savannah, GA
Rate: $65/HR - $72/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/06/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Stress Analysis, Interior Furnishings - Engineer Contractor 4

Description:
Inconen is looking for a Completions Stress Analysis, Interior Furnishings - Engineer Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique skills:
-Candidate will be performing structural analysis of company interior monuments using FEA and classical hand analysis.
-Responsibilities will include both the analysis and certification documentation.

The ideal candidate will have experience in the following:
- Use of finite element analysis for both primary and secondary structures required. Working knowledge of FEMAP required.
- Experience performing structural analysis on interior furnishing is preferred.
- A good understanding of a fast-paced completion-style environment
- Primary structures experience preferred. MRB experience is preferred.
- Experience working with company delegated structural AR's/DERs in an ODA environment in support of new and unique STC certification of aircraft installations preferred

Education and Experience Requirements:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17000
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/06/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Contract Administration Spec 1

Description:
ur team currently has an opening for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has an open position. One position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The other position would support international or commercial customers across similar platforms.

Primary Responsibilities include:

o RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
o As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
o Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
o Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
o Submits offers and serves as official 'The Company' representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
o Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
o This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

SKILLS/ EXPERIENCE

Adobe Experience
MS Office Experience, specifically Excel.
Experience in contracts or finance related positions which could include developing proposals or negotiating contracts preferred.

Education/experience typically acquired through advanced education (e.g. Bachelor) or an equivalent combination of education and experience (e.g. 4 years' related work experience).
 
Job Number: JPC-1359
Job Location: Hazelwood, Mo
Rate: 35HR
Per Diem: YES
Overtime: NO
Duration: 9 MONTHS
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: DIEGO VILLEGAS
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: diego.villegas@thestructurescompany.com
Website: www.thestructurescompany.com

Contract Administration Specialist 1

Description:
Job Description:

Our team currently has an opening for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has an open position to support. One position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The other position would support international or commercial customers across similar platforms.

Primary Responsibilities include:

o RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
o As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
o Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
o Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
o Submits offers and serves as official company representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
o Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
o This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

SKILLS/ EXPERIENCE:

Adobe Experience
MS Office Experience, specifically Excel.
Experience in contracts or finance related positions which could include developing proposals or negotiating contracts preferred.

Education/experience typically acquired through advanced education (e.g. Bachelor) or an equivalent combination of education and experience (e.g. 4 years' related work experience).

The individual selected for this position will be working on a project where they will contract for military spare parts and repairs, working alongside a team of 35 individuals. The ideal candidate will have a strong understanding of finance acumen, possess strong communication skills and have the ability to work both independently and collaboratively. This candidate must be adaptable to change and value diversity within the workplace. Certifications are not a requirement for this role.

Additional Info:
This position will start off as a virtual position. A hybrid schedule of both on-side and virtual will be required once restrictions are lifted. For this reason, the manager would prefer local candidates only.

Manager is wanting to scheduling interviews as soon as possible. This will be a 2 round interview, with the first round being over the phone and the second being in-person. The interview will include both experience and behavioral based questions.
 
Job Number: 46676-1
Job Location: Hazelwood, MO
Rate: $35.00
Per Diem: Split
Overtime: Possible
Duration: 9 Months
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: jorge.garcia@thestructurescompany.com
Website: www.thestructurescompany.com

Customer Support Distribution & Logistics Specialist I

Description:

PDS Tech is seeking a Customer Support Distribution & Logistics Specialist I for an open position in Savannah, GA.


Position Purpose:

Develop an understanding of the quality practices required. to perform the material handling, transport and picking of orders to support AOG requirements and other needs in aerospace markets. Under moderate supervision, demonstrate an ability to operate in a high-paced, productive environment to support all internal customer requirements in a timely, professional manner.

Essential Functions:
1. Process pick tickets/ orders by pulling and issuing parts to support service center, spare parts sales, back shops, ASC and distribution allocation. Ensure correct regulatory documentation accompanies parts
2. Demonstrate a basic understanding of inventory management systems (such as Corridor or SAP) to process all relevant transactions associated to material handling and distribution.
3. Demonstrate brand protection awareness by adhering to Material Handling Standards.
4. Handle and transport Dangerous Goods in accordance with standards.
5. Elevate any discrepancies to appropriate party as needed with clear communication on steps taken and needed.
6. Maintain a clean and orderly work environment and assist in facility management and general housekeeping.
7. Perform other duties as assigned.



 



 



Education and Experience Requirements:



  • High School Diploma or GED required.
  • Valid Driver’s License required.


Unique Skills:



Skills include high quality standards and understanding of aircraft parts, equipment and tooling showing superior customer service. 


 

Other Requirements:
1. Ability to obtain certification to operate forklift and other material handling equipment.
2. Must possess and maintain a valid driver’s license. Ability to pass DOT medical exam.
3. Working knowledge of computerized inventory procedures to include experience in material services, inventory control or production control.
4. Experience of computerized inventory management system.
5. Basic working knowledge of Microsoft Office Suite.
6. Good written and verbal communication skills.
7. Must be able to lift 50 pounds.
8. Ability to operate standard office equipment, personal computer, telephone, fax & copier.
9. Must be able to work all shifts and weekends.
10. Shifts are subject to change at short notice.



 



 


 
Job Number: 2110140579
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/06/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jBLdQAM&URLSource=cjhunter

ECS Manager

Description:
General Summary:

The ECS Manager manages the technical, cost and schedule and personnel aspects of the Environmental Control Systems (Pneumatic System, Pressurization System, Air Conditioning, Cabin Pressure Control System, Leak Detection System, Oxygen System, and Waste System) through all phases of design, development, certification, production, and product support. Ensures all aspects of design are compliant with the system requirements document.



Duties and Responsibilities:

Oversees and coordinates the ECS project activities through all phases of design, development, certification, production, and production support.
Maintains and presents to senior management the integrated project schedule and status for the Environmental Control Systems.
Tracks and reports status of action items related to design, development, certification, and flight test related for the ECS.
Prepares and maintains functional test procedures to test the ECS sub-systems as installed on the aircraft.
Prepares and maintains functional interface control document(s) that identify the integration requirements between the ECS sub-systems and the aircraft avionics / electrical power system.
Prepares and maintains regression test procedures to test the avionics/electrical power system integration of the ECS sub-systems.
Conducts regression tests to ensure that the ECS sub-systems are integrated into the avionics / electrical power system per the released requirements.
Prepares, maintains, and tracks issue reports associated with the ECS sub-systems to closure/resolution.
Provides technical and logistical assistance to manufacturing and flight test to resolve any technical issues associated with the ECS.
Prepares/reviews qualification test procedures and qualification test reports associated with the ECS.
Establishes qualification test schedules with the supplier of the ECS components and coordinates Designated Engineering Representative (DER) support.
Reviews and coordinates complex hardware / software deliverables between the supplier, HAC and the DERs.
May serve as the DER for the applicable delegations.
Supports the creation of the certification plan for the ECS.
Manages personnel by assigning and monitoring tasks so that they are done on time and are complete and accurate.
Conducts performance evaluations for personnel and creates, implements and monitors personnel development plans.












Education, Work Experience, Certification and/or Licensure:

Bachelors degree in Engineering or related field required.
8 years of leadership experience in one or more of the Environment Control Systems including: design; development: aircraft integration, and certification.


Knowledge, Skills and Abilities:

Experience in managing personnel.
Strong organizational skills.
Excellent oral and written communication skills.
Strong presentational skills.
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata.
Excellent working knowledge of Microsoft Office Suites (Word, Excel, Project Management, Lotus Notes, PowerPoint).
Strong working knowledge of DO-160, DO-178B and DO-254 processes are required,
Knowledge of aircraft communication buses such as ARINC 429 strongly preferred.
Strong working knowledge of FAA processes and procedures related to qualification testing.
Strong working knowledge of 14CFR23 or 25 and advisory circulars related to ECS regulations.
Experience in supporting manufacturing of aircraft from a technical standpoint.
Experience in preparing detailed functional test procedures.
Experience in creating Crew Alerting System (CAS) logic.
Experience in preparing/reviewing qualification test procedures for DO-160 tests required.
Experience in preparing or reviewing FAA certification plans is required.

The Structures Company LLC is an AA/EOE.
 
Job Number: 500
Job Location: Greensboro, NC
Rate: $150K **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-6 Weeks
Input Date: 09/07/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Aircraft Interiors Engineer with Mentorgraphics

Description:
===========================================
Engineer Contractor 3 - Electrical Interiors in Savannah, GA
Unique Skills:
• Capitol Harness &/or Mentorgraphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: PL Elec Interiors
Job Location: Savannah, GA
Rate: $60-65/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/23/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Electrical Applications Engineer

Description:
Inconen is looking for an Electrical Applications Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Required Skills:
-Candidate must have in-depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
-In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
-Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
-Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

Education Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15311
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/18/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Inconen is looking for an Electrical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Experience with Capital Logic required.
-Experience with Smarteam preferred.
-Experience with Instrumentation electrical design a plus.
-Experience with Aircraft electrical wiring diagrams a plus.
-Analog electrical design experience a plus.

Education and Experience Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15447
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Design and Analysis Engineer

Description:
PDS Tech is seeking an Electrical Design and Analysis Engineer for an open position in Manassas VA

The ideal candidate will:
  • Resolve complex issues on critical programs related to architectural approaches, requirements, specifications and design.
  • Lead technical aspect of proposal preparation.
  • Identify critical performance measures and develops processes for computing them.
  • Lead activities in support of Supplier Management with make/buy recommendations and other technical services.
  • Coordinate engineering support throughout the lifecycle of the product.
  • Develop new concepts for future product designs to meet projected requirements.
  • Recommend and manage technology insertion.
  • Work under consultative direction.

Candidates must meet the following requirements:
  • BSEE or equivalent technical degree with 6 years of relevant experience or MS with 4 years of experience, or PhD with 2 years of relevant experience
  • Ability to translate requirements to design
  • Experience with high level architectural design and component selection
  • Proven experience performing an electronic detailed design, including schematic capture
  • Proficient using EDA tools
  • Experience with test planning and execution
  • Experience with test procedure development and documentation
  • Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
  • Strong analytical skills and ability to debug complex systems
  • Process oriented and familiarity with problem tracking systems
  • Ability to communicate effectively
  • Ability to work independently and deliver on schedule commitments
  • Candidates must be willing to work on-site at the Manassas, VA facility as needed


Desired Requirements:

  • Candidates will perform all work on-site at the Manassas, VA facility


Candidates will have experience in some of the following areas:

  • Aircraft avionics
  • Experience with Mentor Graphics Capital tool
  • Block diagramming with Microsoft Visio
  • Experience supporting the manufacturing process from requirements through build and test
  • Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
  • Familiarity with high voltage power systems for electric aircraft propulsion
  • Experience with environmental qualification and stress testing of hardware


 
 
Job Number: 2110141022
Job Location: Manassas, VA
Duration: 6 months
Input Date: 10/13/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jChfQAE&URLSource=cjhunter

Electrical Design and Analysis Engineer

Description:
PDS Tech is seeking an Electrical Design and Analysis Engineer for an open position in Manassas VA

The ideal candidate will:
  • Analyze customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
  • Develop high-level and detailed designs consistent with requirements and specifications.
  • Validate designs through various methods of review, testing and analysis.
  • Identify, track and status technical performance measures to measure progress and ensure compliance with requirements.
  • Support Supplier Management with make/buy recommendations and other technical services of limited scope.
  • Provide engineering support throughout the lifecycle of the product.
  • Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
  • Work under general direction.

Minimum Requirements:

Candidates must meet the following requirements:

  • BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
  • Ability to translate requirements to design
  • Experience with high level architectural design and component selection
  • Proven experience performing an electronic detailed design, including schematic capture
  • Proficient using EDA tools
  • Experience with test planning and execution
  • Experience with test procedure development and documentation
  • Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
  • Strong analytical skills and ability to debug complex systems
  • Process oriented and familiarity with problem tracking systems
  • Ability to communicate effectively
  • Ability to work independently and deliver on schedule commitments
  • Candidates must be willing to work on-site at the Manassas, VA facility as needed


Desired Requirements:

Candidates will perform all work on-site at the Manassas, VA facility



Candidates will have experience in some of the following areas:


  • Aircraft avionics
  • Experience with Mentor Graphics Capital tool
  • Block diagramming with Microsoft Visio
  • Experience supporting the manufacturing process from requirements through build and test
  • Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
  • Familiarity with high voltage power systems for electric aircraft propulsion
  • Experience with environmental qualification and stress testing of hardware
  • Familiarity with high speed digital electronics, including serial data hardware interfaces
  • DO-160, DO-178 or DO-254
  • ARP4761, ARP4754
  • MIL-HDBK-516
  • MIL-STD-810, MIL-STD-461, MIL-STD-704

 
Job Number: 2110141020
Job Location: Manassas, VA
Duration: 6 months
Input Date: 10/05/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jChQQAU&URLSource=cjhunter

Electrical Engineer

Description:
Are you known for your attention to detail and pride yourself in being a responsible professional Electrical Engineer? Join our team and take your career to new heights!

Principal Duties and Responsibilities and Preferred Experience Requirements:
*Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
*Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
*Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
*Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
*Aerospace Experience is required
*Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
*Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
*Knowledge of Catia V5 Electrical workbench is necessary
*Knowledge of Catia V5 Sheetmetal workbench is necessary

Position Purpose:
*Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production.
*Contributes to planning, developing and coordinating of important engineering projects.
*Provides specialized technical assistance to team members.
*Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
*Determines and develops own approach to solutions within schedule and cost objectives.
*Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
*Acts as liaison with representatives outside of the assigned group/area.
Actively works to improve daily processes and ensures all work meets customer requirements.
*Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
*Perform other duties as assigned.
Advanced degree in engineering related field preferred.

Education Requirements:
*Bachelor's Degree - Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
*18 months of related Engineering experience.
*Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Savannah, GA
Rate: $65/HR - $70/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/03/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Engineer

Description:
Inconen is looking for an Electrical Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Avionics and/or Electrical system development and integration experience is required.
-Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
-Experience with Integrated Modular Avionics is preferred.
-Understanding of DO-160, DO-178 and DO-254 processes is preferred.
-System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
-ARP-4754A experience including requirements development, validation and verification is preferred.
-Experience with composing/revising schematics and/or wiring diagrams.

Education and Experience Requirements:
-Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
-18 months of related Engineering experience.
-Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.
 
Job Number: 16968
Job Location: Savannah, GA
Rate: $50.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Engineer

Description:
Inconen is looking for an Electrical Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Required Unique skills:
-Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
-Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
-Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
-Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
-Aerospace Experience is required.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.
-Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.
-Knowledge of Catia V5 Electrical workbench is necessary.
-Knowledge of Catia V5 Sheetmetal workbench is necessary.

Education and Experience Requirements:
-Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
-18 months of related Engineering experience.
-Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members.
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
4. Determines and develops own approach to solutions within schedule and cost objectives.
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16969
Job Location: Savannah, GA
Rate: $50.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Engineering Contractor

Description:
Inconen is looking for an Electrical Engineering Contractor for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
-Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
-Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
-Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
-Aerospace Experience is required
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
-Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
-Knowledge of Catia V5 Electrical workbench is necessary
-Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members.
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
4. Determines and develops own approach to solutions within schedule and cost objectives.
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16907
Job Location: Savannah, GA
Rate: $58.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/16/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Harness Installation Engineer/Secondary Structures

Description:
Inconen is looking for a Electrical Harness Installation Engineer/Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

Unique skills:
1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
5. Aerospace Experience is required
6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
8. Knowledge of Catia V5 Electrical workbench is necessary
9. Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15220
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/03/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical/Avionics Engineer - Contract

Description:

PDS is looking for an Electrical/Avionics Engineer in Wichita, KS:



In your role, you will:

  • Create system schematics, requirements documents, system descriptions, interface documents, wiring diagrams, certification plans, issue papers, functional test requirements, test plans, test reports, and design compliance reports for new and/or upgraded aircraft systems.
  • Review installation drawings, qualification test data and reports.
  • Champion and/or support change management through research, concepts, design reviews, trade studies, impact analysis, and implementation.
  • Find/Show compliance to 14CFR Part 25, Transport Canada, and EASA aircraft requirements.
  • Research specifications for components selections.   Work with suppliers and internal customers to assist with production and/or flight test personnel, investigating, troubleshooting, and resolution of build and test issues.
  • Extensive coordination with suppliers and internal support groups
  • Work in a team environment


Qualifications
As our ideal candidate,
  • You hold a Bachelor of Science, Electrical Engineering or equivalent.
  • You have a minimum of 5 years’ experience in electrical/avionics system design or related field.
  • You have a working knowledge of applicable regulatory certification rules (FAA, EASA, TCCA).
  • You have a working knowledge of Cybersecurity and System Safety aspects of certification
  • You are proficient with MS Office (MS Word, Excel, Power Point, Access)
  • Engineering Design for Six Sigma or Six Sigma Process training is a plus.
  • You have a working knowledge of electrical, avionics, and wire harness design guidelines for CFR Part 25 aircraft is preferred.
  • You must be a self-starter, able to decompose moderately complex projects into individual tasks and processes. 
  • You must exhibit excellent written and interpersonal communication skills.
  • You should be an organized individual, able to work effectively with a variety of cross-functional individuals, departments and organizations with a general good attitude and disposition.


 
Job Number: 2110137285
Job Location: Wichita, KS
Duration: 12 months
Input Date: 08/18/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003izQqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Repair Technician II

Description:
Visium Resources has been asked to identify candidates for the following position, currently located in Piscataway, NJ.

****This position is a contract position until mid-March '22 and may have the opportunity to relocate to Orlando, FL after the contract.

Electronics Repair Technician II is responsible for the intermediate electronic maintenance, test, repairs, services, and
modifications of electronic equipment in accordance with FAA regulations.
Essential Functions / Key Areas of Responsibility
Troubleshoots and repairs electronic equipment to component level in accordance with FAA regulations and company IPM
(Inspections Procedures Manual)
Modifies equipment according to service bulletin and/or manufacturer documentation
Works independently or in collaboration with experienced electronics technicians
Carries out prescribed procedures according to an established schedule
Receives training in the use of more specialized test instruments and learn advanced troubleshooting procedures
Follows specific layout and schematic diagrams to repair and maintain simple or advanced devices or subunits of equipment and
schematic diagrams such as power supplies, oscillators, amplifiers, etc.
Review work orders to ensure customer requested activities have been complied with, prior to release of the repair
Work is reviewed by Technician IV, supervisors, and inspectors
May work on alternative assignments with detailed written or oral instructions
Completes quality and production paper work, prepares estimates, and maintains maintenance documentation in accordance with
current quality assurance requirements
Communicates with cross-functional departments as required to support repair process
Participates in Technician cross training programs and may be assigned to other teams for short or long term assignments
Completes repairs in accordance with company ISO procedures and within company objectives

Qualified candidates would have the following:

US Citizens or Green Card Holder required
Minimum of four (4) years related experience in servicing Aircraft electronics to a component level preferred in the commercial airline and/or aviation product support field or a two (2) year college level degree in an electronics related field. Must have understanding of Federal Aviation Regulations and other governing regulatory requirements
Able to meticulously document incoming product condition and maintenance activities
Pass a seven (7) year background check and pre-employment drug test
Legally eligible to work in the country in which the position is located
Familiarity with both analog and digital electronics, hardware and software
Must have experience using a PC (personal computer)
Ability to read and understand engineering drawings and wiring diagrams
Ability to understand and speak English in order to read technical literature, follow oral instructions and communicate with cross
functional team members.
Required to have an intermediate understanding of electronic theories and techniques and familiarity with standard electronic
components
Ability to use basic and advanced test instruments and perform adjustments as necessary
Willing to think out-of-the-box to solve operational and technical problems
Manual and Automatic Test Benches, PC, oscilloscope, and multi-meters

Preferred Qualifications
Prior military or commercial avionics level 3 component repair experience preferred
FAA Repair Certificate a plus
Understanding of Federal Aviation Regulations and other governing regulatory requirements
Able to meticulously document incoming product condition and maintenance activities
 
Job Number: 9446
Job Location: Piscataway, NJ
Rate: 25.00
Per Diem: Yes
Overtime: Possible
Duration: 6 Mos +
Start Date: ASAP
Input Date: 10/11/2021
Last Updated: 10/14/2021
Firm Name: VISIUM RESOURCES
Attention: David Story
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 3 - Weight & Balance/Mass Properties

Description:
Inconen is looking for an Eng. Contractor 3 - Weight & Balance/Mass Properties for our client, a well-known Aerospace Company, in Dallas, TX.

**Candidates must be a U.S. Citizen or Permanent Resident**

Weight & Balance/Mass Properties:
-Perform detailed estimating and analysis tasks supporting impacts to aircraft weight and balance and flight envelope.
-Establish and support control methods for weight and balance of in process and completed assemblies and installations.
-Support actual weight and balance of aircraft, direct interfacing with various organizations within completions.
-Track and maintain all mass properties information and support maturing of internal processes.
-Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team.
-Must be able to work extended hours as required.
-Should have working knowledge of FAR Part 25 certification requirements.
-Work without appreciable direction; work is reviewed from a long-range perspective for desired results.
-Willing team member that will perform work accurately combining sound experience with a common-sense approach.
-The qualified individual will adhere to aggressive schedules and budget requirements.

Duties and Responsibilities include:
-Analyzes and calculates weight data of structural assemblies, components, and loads for purposes of weight, balance, loading, and operational functions.
-Generates weight & balance estimates and final weight and balance reports.
-Weighs parts, assemblies, or completed product, estimates weight of parts from engineering drawings, and calculates weight distribution to define balance.
-Excellent communication skills, the position requires direct interaction with designers and operations personnel.
-Detailed oriented, must be able to maintain detailed records.
-Extensive experience with cabin interiors components such as, galleys, closets, headliners, tables, window shades, avionics systems, wring, etc.
-Minimum of 5 years as a Weight & Balance/Mass Properties Engineering.
-Assisting designers in selecting appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
-Anticipates and resolves complex issues in creative and effective ways, developing standards and guidelines for diverse engineering activities
-Proficient in CATIA V5-SmarTeam/Enovia.
-Office Products such as Power Point, Project, Word and Excel
-AutoCAD Knowledge is a must and CHS/EWIS/EHI Methodology is a plus

Education and Experience Requirements:
-Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities
Essential Functions:
-Contributes to planning, developing and coordinating of important engineering projects
-Provides specialized technical assistance to team members
-Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
-Determines and develops own approach to solutions within schedule and cost objectives
-Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
-Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
-Actively works to improve daily processes and ensures all work meets customer requirements
-Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
-Perform other duties as assigned.

Other Requirements:
-Advanced degree in engineering related field preferred.
-The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16994
Job Location: Dallas, TX
Rate: $63.00 - $68.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/04/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15037
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Electrical Engineer, Completions

Description:
Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
1) Catia V5 experiences a preference.
2) 14 CFR 25 Subpart H - EWIS based design experience a must.
3) Completions electrical system design experience preferred.
4) Part 25 Certification experience for cabin interiors preferred.
5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6) Experience with power distribution, lighting, switching, and harness routing required.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.
9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
10) Makes technical decisions and provides recommendations demonstrating leadership authority.
11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
13) Develops standards and guides for diverse engineering activities.
14) Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12828
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer/Developer

Description:
An Engineer/Developer job is currently available at Belcan in West Palm Beach, FL. This is a full time, direct job with full benefits. Great matching candidates will have a Bachelor Degree in Aerospace or Mechanical Engineering or Computer Science/Engineering. In this job, you will support analytics software development for propulsion, aviation and aerospace applications. Tools developed are primarily used to monitor aircraft engine performance, mission and life usage, maintenance practices, parts usage and the interconnected relationships between all of these areas in order to help lower total cost of ownership for our military and commercial customers.
 
Engineer/Developer job duties:
· Analytics software configuration and development of processes to optimize validity of large datasets, which includes client-facing GUI data analysis and reporting tools.
· Develop rapid-prototyped software methods in a flexible environment with requirements that are often loosely defined.
· Collaborate with software development team to deliver robust customer solutions.
 
Qualifications:
· Bachelor of Science degree in Computer Science, Mechanical Engineering, Aerospace Engineering, or Computer Engineering.
· Knowledge of, and desire to work with, database-enabled programming tools.
· Background in basic software design & code development and interest in military or commercial aircraft engine propulsion and/or aerospace systems.
· Excellent complex problem-solving skills, very detail-oriented, and comfortable working with minimal direction.
· Familiar with enterprise databases (MS SQL Server, Oracle, etc.).
o Creating basic Tables, Stored Procedures, Functions, Views, etc.
· Basic understanding of SQL database queries.
· Experience with Python, C# or Informatica a strong plus
· Proficient with Microsoft Office products.
· Good work ethic, strong client communication skills, efficient and highly organized.
· Motivated to learn and find solutions to unexpected problems using complex analytical thinking.
· Some propulsion/aerospace classes or concentration is preferred.
· Must be U.S. Citizen.
 
If you are interested in this Engineer/Developer job in West Palm Beach, FL please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
www.BELCAN.com

 
Job Number: 316330
Job Location: West Palm Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/17/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
City, State: Belcan - Recruiting
Email: mdubey@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=316330&job_number=316330

Engineering Contractor 3 - Weight & Balance/Mass Properties

Description:
Are you known for your attention to detail and pride yourself in being a responsible professional? Join our team and take your career to new heights!

Position Purpose:
*Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

Duties and Responsibilities include:
*Analyzes and calculates weight data of structural assemblies, components, and loads for purposes of weight, balance, loading, and operational functions.
*Generates weight & balance estimates and final weight and balance reports.
Weighs parts, assemblies, or completed product, estimates weight of parts from engineering drawings, and calculates weight distribution to define balance.
*Excellent communication skills, the position requires direct interaction with designers and operations personnel.
Detailed oriented, must be able to maintain detailed records.
*Extensive experience with cabin interiors components such as, galleys, closets, headliners, tables, window shades, avionics systems, wring, etc.
*Minimum of 5 years as a Weight & Balance/Mass Properties Engineering.
*Assisting designers in selecting appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
*Anticipates and resolves complex issues in creative and effective ways, developing standards and guidelines for diverse engineering activities
*Proficient in CATIA V5-SmarTeam/Enovia.
*Office Products such as Power Point, Project, Word and Excel
*AutoCAD Knowledge is a must and CHS/EWIS/EHI Methodology is a plus

Unique Skills:
*Weight & Balance/Mass Properties
*Perform detailed estimating and analysis tasks supporting impacts to aircraft weight and balance and flight envelope.
*Establish and support control methods for weight and balance of in process and completed assemblies and installations.
*Support actual weight and balance of aircraft, direct interfacing with various organizations within completions.
Track and maintain all mass properties information and support maturing of internal processes.
Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team.
*Must be able to work extended hours as required.
*Should have working knowledge of FAR Part 25 certification requirements.
*Work without appreciable direction; work is reviewed from a long-range perspective for desired results.
*Willing team member that will perform work accurately combining sound experience with a common-sense approach.
*The qualified individual will adhere to aggressive schedules and budget requirements.

Education and Experience Requirements:
*Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
*Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Equal Opportunity Employer/Veterans/Disabled
 
Job Location: Dallas, TX
Rate: $50/HR-$54.17/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/04/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: corey.halliday@thestructurescompany.com
Website: www.thestructurescompany.com

Entry Level Aircraft Maintenance Technician

Description:
PDS Tech is seeking an Entry Level Aircraft Maintenance Technician for an open position in Louisville KY

The ideal candidate will perform various overhaul, rework, repair and associated operations on aircraft equipment and components in both standard and non-standard environments to maintain the flow of work.

The candidate will conduct:
  • Manual handling of aircraft wheels (rolling)
  • Dismounting of wheel halves (removal from tire)
  • Disassembly of wheel half piece parts
  • Washing wheel halves and piece parts (prep for inspection)
  • Paint removal – plastic media blast cabinet

     

The will also:

  • Conduct receiving inspection of in-coming assemblies/components in accordance with established procedures and technical data.
  • Be responsible for performing complete operation checkout, modification, disassembly, repair, reassembly, test calibration, diagnosis, and correction of problems.
  • Follow repair and return processes to ensure high quality and short cycle time of repair and return.
  • Set up necessary repair and test facilities.


On the job training will be provided. 
Small hand tool experience or previous mechanical experience a plus
 
Education:
  • High Diploma
  • US Citizens Only

 
Job Number: 2110128137
Job Location: Louisville, KY
Duration: