Job Search Results

566 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/12/06 Friday 04:47AM Pacific Time by ContractJobHunter. )

Listings 1 - 566

Go To My Job Tracker

Expand all descriptions

2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).

Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/04/2019

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.

Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/04/2019

2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.

Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 12/04/2019

Acft Tech Sr

Description:
PDS is seeking an RS Acft Tech Sr for an open position in Savannah, GA.

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.

Principal Duties and Responsibilities:

Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.
7. Coordinate movement of aircraft as required.
8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.

Additional Functions:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned.

For Additional Information on this Opening Please Contact Kellye Roberts:

Direct Number: 912-257-4867
Email Your Updated Resume to kroberts@pdstech.com

Education and Experience Requirements:
High school diploma/GED.
FAA Airframe and Powerplant Mechanic Certificate required.
Valid Drivers License required.
Four years of aviation maintenance experience to include 3 years of experience working on mid/large-size aircraft required.
Corporate aircraft experience preferred.

Unique Skills:

Effective communication skills working as a team and be comfortable around live aircraft operations. Read and interpret aircraft maintenance data to include drawings and schematics. Must be willing to work any shift assigned by STM.

Other Requirements:
1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.)
3. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.

Job Number: 1910108265
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/28/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQaXQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team's performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.

Job Number: 11710
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/11/2019
Last Updated: 11/14/2019

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
9. Proficient with MS Office tools.

Job Number: 11678
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/09/2019
Last Updated: 11/14/2019

Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe

Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 09/30/2019
Last Updated: 12/04/2019

Aeronautical Engineer - Clearance CA

Description:
166409
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract

Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position

Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 10/01/2019
Last Updated: 12/05/2019

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview / strong background in experimental plasma physics CA

Description:
166532
Job Title: Aeronautical Engineer
Work Site Address: Palmdale, CA 93599
Job Number: 2222-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

Roles and Responsibilities
The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
Requires use of MS Office software tools to compile data, reduce data, and generate reports.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
--Proficient with MS Office tools

Qty 1 position
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
None to start. Must be able to obtain a Secret security clearance.

Job Number: JE-2222-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/31/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena CA

Description:
166557
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2225-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments. Requires use of MS Office software tools to compile data, reduce data, and generate reports. Strong verbal and written communication skills are highly desirable.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
--Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
Occasional overtime and odd hours required. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.

Qty 1 position

Job Number: JE-2225-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 11/14/2019

Aircraft Interiors Design Engineer

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.

ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.

The Structures Company is an AA/EOE.

Job Number: 339
Job Location: IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/26/2019
Last Updated: 12/05/2019

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Mechanic

Description:
Chipton-Ross is seeking a Product Repair/Mod Tech C for an opening in New Orleans, LA.

RESPONSIBILITIES:
This position is for an F-15 electrical and avionics subject matter expert. Applies advanced technical knowledge of F-15 systems to solve unusually complex problems that typically cannot be solved solely by referencing schematics, engineering data or similar documents. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

EDUCATION:
Accredited high school diploma or GED and minimum 5 years� experience (equivalent combination of required education and electrical experience in a modification environment).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 4:30 PM

TRAVEL: YES
<10% ADDITIONAL REQUIREMENTS: This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates. MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182869
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 11/06/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Michael Olivarez
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: molivarez@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.

Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

Job Number: 180533
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 07/19/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Airframe Structural Analyst

Description:
PDS Tech is seeking an Airframe Structural Analyst in Hunstville, AL.

The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.

Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include:

Static structural analysis and Margin of Safety determination,
Fatigue and fracture mechanics analysis of critical interfaces,
Determination of airframe component replacement and / or retirement times,
Specification and design of airframe related static and fatigue tests,
Field support and
Formal engineering documentation.

Education requirement: B.S.in M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience
Required:

Minimum of 12 years’ experience in the functions described above.
Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
Excellent oral and written communication skills

Software Experience:

NASTRAN/PATRAN or equivalent FEM,
Catia
MS Office applications.

Secret Clearance preferred but not required.

US Citizenship Required.

Job Number: 1910105509
Job Location: Huntsville, AL
Duration: 15 months
Input Date: 08/13/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWpKQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Engineer

Description:
SG is hiring an Airframe Structural Engineer for a 15+ months contract opportunity in Huntsville, AL!

Description:

The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.
Specific functions include: Static structural analysis and Margin of Safety determination, fatigue and fracture mechanics analysis of critical interfaces, determination of airframe component replacement and / or retirement times, specification and design of airframe related static and fatigue tests, field support and formal engineering documentation.

Education requirement:

B.S.in
M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience Required:

Minimum of 12 years experience in the functions described above.
Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
Excellent oral and written communication skills are required.
Software Experience: NASTRAN/PATRAN or equivalent FEM, Catia, MS Office applications.
Secret Clearance preferred but not required.
US Citizenship Required.

Job Number: 375757
Job Location: Huntsville, AL.
Per Diem: Possibly
Overtime: Possibly
Duration: 15+ Months
Start Date: ASAP
Input Date: 09/23/2019
Last Updated: 10/31/2019

Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Application Development - Cleared Contractor

Description:
Job Description:
Responsible for research, design, and development of computer software systems in conjunction with hardware product development.
Primarily responsible for the design and development of software products for a variety of software applications.
Participates in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and test of software products.
Applies computer science, engineering, and mathematical analysis concepts and principles in the development of the target application.
Works closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system.
Develops software test procedures, software programs, and related documentation. Contributes to determining, estimating, and validating the cost and scope of software efforts to ensure product meets project cost, schedule, and technical constraints.
Recognized as an internal expert and thought leader in area of expertise with broad experience across multiple job areas.
Works under consultative direction against annual goals to manage large, complex project initiatives of strategic importance to the organization.
Communicates within and outside of the organization to influence leadership to accept new practices, approaches, and concepts.
Develops or champions new systems, concepts, or technologies.
Recommends tactics and strategies that directly impact the achievement of overall business or functional results.

QUALIFICATIONS
A Bachelor's degree in Computer Science, Electrical Engineering, or related engineering field
9+ Years of Embedded Software Engineering experience
9+ Years experience with Ada
9+ Years Real Time Operating Systems Experience
Must have Real Time Operating Systems Experience
Experience with Ada

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Location: Clifton, NY
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 10/25/2019

Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Assembler - Level 3

Description:
PDS Tech, Inc. has multiple openings for a Senior Mechanical Assembler position located in Owings Mills, MD.

Basic Function:
Electrical and Mechanical assembly of components used for production and proto-type projects. Testing of completed units to required specifications prior to shipment.

Responsibilities:
• Interpret and work from assembly drawings, schematics, sketches, and verbal instructions.
• Assemble with a high level of efficiency and quality.
• Provide feedback for continued improvement of processes and procedures.
• Maintain a well organized, neat, and safe work area.
• Assist in the training of new employees in the assembly area.
Associates degree, Technical School, or 8 plus years of Industrial Manufacturing experience.

Experience in the following:
• Read and interpret electrical schematics and mechanical assembly drawings.
• Thorough understanding of electrical and mechanical assembly practices.
• Electrical panel building.
• Electrical testing and troubleshooting.
• Basic pneumatics system knowledge.

Personal characteristics:
• Self-motivated
• Flexible
• Punctual and reliable

Job Number: 1910108502
Job Location: Owings Mills, MD
Duration: 4 months
Input Date: 11/04/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Paige West
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSHyQAM&URLSource=cjhunter

Assembler - no clearance FL

Description:
166618 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2423-1
Max Pay Rate: $22.00/hr
Start Date: 10/30/2019
End Date: 11/1/2020

Job Summary:
Builds complex sub-assemblies using a variety of tools including crimpers, lugging devices, torque devices and other complex and basic hand tools. Builds complex structural assemblies using blueprints and processes.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Fabricates complex wire harnesses with a variety of complex connecting devices. Reads and interprets complex wire diagrams, blueprints, drawings and work instructions. Solders complex components in sub-assemblies using a variety of techniques including j-hooks, turrets, etc.

Qualifications and Education Requirements
Technical, vocational and/or related military technical degree in electronics or related discipline.
Mandatory 10 + years of experience in aerospace and/or DOD manufacturing or modification involving the installation or modification of electronical components and electrical systems.
Thorough understanding of electrical theory and excellent understanding of electrical schematics and drawing.
Previous experience working in an ESD environment.
Ability to work with little to no supervision.
Very strong solder skills are a requirement.
Good written and communication skills.
Computer skills must be intermediate to advanced.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 3 positions

Job Number: LMRMS-2423-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/01/2019
Last Updated: 12/05/2019

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards
Low Voltage Knowledge

Responsibilities of the Test Technician will include:

Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments.

Required Skills and Knowledge:

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators.

• Understanding of safe practices for working with electrical circuits.

• Familiarity with surface mount and through-hole electronic components.

• Ability to troubleshoot analog and digital circuits to the component level.

• Understanding and application of ICT and functional testing of subassemblies.

Qualification:

• Associates Degree in Electronics Engineering or equivalent

• Must possess effective written and verbal communication skill.

• Must adapt well to a changing environment.

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs.

• Experience troubleshooting electronic circuits.

Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Associate Image Scientist

Description:
PDS Tech, Inc. is seeking Associate Image Scientist in Westford, MA.

The successful candidate will have sufficient image science background to work on the algorithmic components required to process raw digital imagery and understand the interaction within an imaging chain as well as order of operations. They will understand the fundamental factors that make-up and influence image quality as well as being familiar with some of the measurement concepts, such as the modulate transfer function (MTF), relative edge response (RER), dynamic range, signal to noise ratio (SNR).

Experience with geo-positioning, geo-location or photogrammetry would be a plus.
A current active security clearance is a plus.
Basic Requirements:

US Citizenship required. Willingness to obtain and ability to obtain a US Government security clearance is required.
This position requires a minimum of a Bachelor’s degree in the appropriate disciple such as Image Science or related fields such as Physics and Electrical Engineering along with 3 years of relevant experience. In the absence of a degree 7 years of relevant experience is required

Preferred Skills:

Familiar with SOCET GXP software
Familiar with ENVI software
Knowledge of photogrammetry and geo-location methods

Experience/Qualifications:

Experience with Electro-optical systems
Proficient with Matlab and/or IDL for scientific programming and data analysis
Proficient with Microsoft Office software: Word, PowerPoint, Excel
Experience with ISR systems and DOD is a plus
Familiarity with C++ is a plus
Familiarity with Machine Learning would be a plus
Ability to multi-task
Team oriented
Excellent verbal and written skills
Travel
10%
Knowledge of image systems and associated processing
Strong Mathematical background
Strong team player and interpersonal skills
Excellent verbal and written skills

Job Number: 1910107089
Job Location: Westford, MA
Duration: 24 months
Input Date: 09/25/2019
Last Updated: 12/06/2019

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week

Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:

General Mechanic
Electrical
Structures
Avionics Tech
Quality Inspection
Supply Chain Specialist

Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!

Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com

Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

Description:
166338 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2095-1
Max Pay Rate: $29.00/hr
Start Date: 10/7/2019
End Date: 1/31/2020
Position Type: Contract

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

Job Description:
Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
• Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
• Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
• Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
• Experienced in troubleshooting and flight line operations a must

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

Qualifications and Education Requirements
Needs to be really experienced in troubleshooting and flight line operations

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise C-130J Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

Qty 1 position needed

Job Number: JEG -2095-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 10/15/2019
Last Updated: 12/05/2019

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters

Job Location: Nationwide
Input Date: 06/12/2018

Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/10/2019
Last Updated: 11/20/2019

Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus

Job Location: Midwest
Input Date: 01/14/2015

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus

Job Location: Southeast
Input Date: 01/14/2015

Avionics Engineer

Description:
Chipton-Ross is seeking an Avionics Engineer for an opportunity in Fort Worth, TX

RESPONSIBILITIES:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

REQUIRED EXPERIENCE:
Experience in avionics or electronic warfare system integration and test.

Desired skills
Direct hands-on experience with system integration/testing and data analysis. Willingness to contribute in both technical and non-technical areas to ensure team/program success. Experience in product development and testing of supplier developed hardware.

EDUCATION:
Accredited Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 9/80-A

Job Number: 182273
Job Location: Fort Worth, TX
Rate: $DOE
Duration: 15 MONTHS
Input Date: 10/11/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret is acceptable****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university.
2. Experience in avionics or electronic warfare system integration and test.

Desired Skills:
1. Direct hands-on experience with system integration/testing and data analysis.
2. Willingness to contribute in both technical and non-technical areas to ensure team/program success.
3. Experience in product development and testing of supplier developed hardware.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 11704
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 12/04/2019

Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS

Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 12/04/2019

Avionics Engineer

Description:
Chipton-Ross is seeking an Avionics Engineer for an opportunity in Fort Worth, TX

RESPONSIBILITIES:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

REQUIRED EXPERIENCE:
Experience working electro-optic (EO) systems.

Desired skills
Active F-22 Project Clearance desired.
The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

EDUCATION:
Accredited Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 9/80-A

Job Number: 182271
Job Location: Fort Worth, TX
Rate: $DOE
Duration: 15 MONTHS
Input Date: 10/11/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 12/04/2019

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 12/04/2019

Avionics Engineer - Clearance TX

Description:
166552
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2306-1
Max Pay Rate: $62.26/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university
Experience in avionics or electronic warfare system integration and test.
Desired skills
Direct hands-on experience with system integration/testing and data analysis.
Willingness to contribute in both technical and non-technical areas to ensure team/program success.
Experience in product development and testing of supplier developed hardware.

Qty 1 position

Job Number: JE-2306-1S
Job Location: Fort Worth, TX
Rate: 62.26/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/11/2019
Last Updated: 12/05/2019

Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position

Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 12/05/2019

Avionics Engineer - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position

Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 12/05/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.

Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA

Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.

Principal Duties and Responsibilities:

Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
Oversees the performance and compliance with engineering changes and modifications as required.
Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
Maintains required logs and records.
Adapts to sudden schedule changes.
Coordinates with other disciplines concerning projects.

Additional Functions:

Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
Self inspection capability for all avionics testing functions in applicable areas.
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Education and Experience Requirements:

High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred.

Unique Skills:

Experience in Solumina and CATIA V5 preferred but not required.

Other Requirements:

Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
APU run qualification and engine run qualification preferred.
Ability to read and interpret basic blueprints and schematic diagrams.

Job Number: 1910107505
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/11/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Booker Woodley
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fNWOQA2&URLSource=cjhunter

Business Manager - Engineering Services

Description:
Job Title:      Business Manager Engineering Services
Location:      Seattle, WA
Salary:          Base + Commission
Job Type:     Full Time w/ benefits

PDS Tech, a leader of high-value contingent staffing and SOW solutions has recently joined the AKKA Technologies Group.

AKKA Technologies is a global leader operating in Engineering and Technology Consulting. With more than 21,000 experts, we are at the forefront of the digital and connected world accelerating innovation and time to market for the world’s largest industrial groups. We support our clients throughout the life cycle of their products. We provide them with expertise that encompasses the entire technological product environment and support them in bringing their product to market.

Today, its North American branch is looking for a Business Manager (2-5 years of exp) who would like to join a dynamic and growing company in Seattle, to support its business development in the Aerospace sector. The position is to be filled in Seattle, as soon as possible.

Description/Tasks
Within the Puget Sound region, the candidate will be focus on bringing high added value Engineering Service solutions to Aerospace customers in the fields of Mechanical Engineering, HW/SW development, Systems Engineering, Electrical Engineering, Tests, Manufacturing Engineering, Airworthiness, Customer Support, Aircraft Modification, and Digital Transformation.
The candidate should have capacity to:

Identify, develop and close new sales opportunities with Aerospace actors (OEM, MRO, Airlines…)
Develop customer relationships
Steering call for tender, financial proposal, team selection.
Management of resources working on projects
Steering project and deliveries.
Being target and results oriented
Start date: ASAP.

Qualification/Experience

At least 2 years’ experience in aeronautics, in Engineering or Sales.
Minimum of Engineering Bachelor’s degree or similar from an accredited university.
Excellent presentation and communication skills are required.
Dynamic, hard-worker and passionate for technologies
Availability for business trip/travel in different states.
Home base: Seattle area.

More information on AKKA Technologies Group can be found on www.akka-technologies.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.

Job Number: 1910106765
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/24/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJkRQAU&URLSource=cjhunter

Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract

Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience

Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 12/05/2019

Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years

Qty 2 positions

Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 12/05/2019

Communication/Network Systems Design Engineer 4

Description:
**Must be able to obtain Secret Clearance**

Definition or establishment of performance requirements, customer requirements, system design constraints, and operational concepts leveraging the MQ-25 System Design Specifications (ASPS, CSPS, IRS, ICDs, etc)
Functional analysis, functional allocation, functional architecture definition, and functional interface requirements definition based on the MQ-25 Weapon Systems Functions established in Cameo (USN) and Rhapsody (Company) architecture tools.
Requirements analysis, conceptual system designs, system/physical architecture definition, and physical interface definition using the baseline System Design and in-line with integration of supplier defined products.
Design authority for system-level engineering products that cross organizational boundaries. Examples include system interfaces, system latency/timing, design margins, and technical budgets, using MQ-25 SDS.
As required, provide a technical presence across the product life-cycle phases to ensure effective transitions. Selected candidates will be immediately embedded into the Agile Requirements Teams (ARTs) to assist meeting ART exit criteria and schedule.
Skills Needed:
Electrical Engineer or Software Engineering with HW and SW system and subsystem integration experience. They will need to provide technical leadership for system design and integration activities across multiple teams, engineering functions. Experience defining requirements; develop system designs; defining interface requirements; coordinating production incorporation; and plan for product testing & deployment.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374184
Job Location: Hazelwood, MO
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 09/19/2019
Last Updated: 12/05/2019

Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Customer Training Specialist

Description:
PDS Tech, Inc. is seeking a Customer Training Specialist in Ridley Park, PA.

Summary:

The CH-47F Avionics / Electrical Systems Customer Training Specialist will be part of the CH-47 Training Services Team, supporting the development and delivery of differences training materials in support of direct commercial sales of the CH-47 Chinook.
The CH-47F Avionics / Electrical Systems Customer Training Specialist will conduct analyses of released engineering documentation and other source materials to evaluate customer technical training needs and determine appropriate training content, objectives, and design.
They will use specialized software technology to research, configure, maintain, update and develop new and existing media and materials utilizing established Style Guides and training material approval processes.
The CH-47F Avionics / Electrical Systems Customer Training Specialist is also expected to conduct and evaluate the effectiveness of technical training within their specialized area of expertise as part of a comprehensive training program to existing and future customers as required.

Prerequisites:

Possess 5+ years of recent knowledge of CH-47F Avionics and Electrical systems as related to operation, testing and maintenance.
CH-47F courseware development and/or technical instructor experience is highly preferred.
Combination of education and experience.
Jet transport category flight and instructor experience preferred.

Category	Name	Required	Level
Areas of Expertise	Design/Create Training Material	Yes	Intermediate
Areas of Expertise	Interpret schematics, assembly drawings, technical manuals	Yes	Intermediate
Software Skills	MS PowerPoint	Yes	Intermediate
Software Skills	MS Word	Yes	Intermediate

Job Number: 1910106161
Job Location: Ridley Park, PA
Duration: 9 months
Input Date: 08/30/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GZLvQAO&URLSource=cjhunter

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Oklahoma City, OK
2019-10166
Responsibilities:
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects.
• Assignment will provide an excellent opportunity to learn aircraft power systems on the various platforms.
• This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.
• Other job responsibilities may include
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Work under consultative mentorship.

Qualification:
• This position requires an active (or ability to obtain) U.S. Top Secret Security Clearance.
• Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.
• Willingness to travel at least 25% of the time as required
• Highly motivated and must work well in a team environment.
• The ability to communicate effectively, both verbally and in writing
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
• ABET accreditation is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2019-10166
Job Location: Oklahoma City, OK
Input Date: 11/06/2019

Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Berkeley, MO
2019-10125
Responsibilities:
• Lead work with customers to develop and document complex electronic and electrical system requirements.
• Lead and coordinate work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Lead work to test and validate to ensure system designs meet operational and functional requirements.
• Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Research technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Understand and apply job practices, techniques, standards, principles, theories, and concepts.
• Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements.
• Develop statement-of-work and technical performance specifications.
• Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle.
• Test and validate to ensure system designs meet operational and functional requirements.
• Resolve product integration issues and production anomalies.
• Support fielded hardware and software over the entire product lifecycle.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.

Qualification:
• The ability to obtain a Secret Securiy Clearance is required at time of hire.
• Must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired.
• Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired.
• Ability to provide technical coordination with internal and external suppliers and customers is a plus.
• Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred.
• Knowledge of data system design, and architectures is desired.
• Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 9+ years of experience, or a Master's Degree with 7+ years of experience, or a PhD with 4+ years of experience.
• Bachelor's degree in electrical or computer engineering is highly desired
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2019-10125
Job Location: Berkeley, MO
Input Date: 11/04/2019

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's located in Oklahoma City, OK.

RESPONSIBILITIES:
� Develops and maintains cable/wire harness detail and assembly designs.
� Analyzes results and performs design reviews.
� Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
� Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
� Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
� Develops basic statements of work.
� Participates in technical review of supplier capabilities to facilitate source selection.
� Analyzes functional and physical input to assure development of complete integrated design.
� Works under general mentorship.

REQUIRED EXPERIENCE
Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
7:30 am - 4:00 pm

MISCELLANEOUS:
This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

This position requires that you work out of Oklahoma City, OK and offer relocation assistance. If you do not currently reside in or near this location, you must be willing to relocate using relocation assistance.

Willingness to travel at least 25% of the time as required

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Job Number: 182845
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 11/06/2019
Last Updated: 12/05/2019

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking an Electrical/Electronic Systems Engineer 3 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 181534
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 09/09/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
OKC is on 9/80 work schedule.

Job Number: 181349
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 08/29/2019
Last Updated: 12/05/2019

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
PDS Tech, Inc. is seeking a Structural Analysis Engineer in Oklahoma City, OK.

Summary:

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
•Leads work with customers to develop and document complex electronic and electrical system requirements.

•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.

•Leads work to test and validate to ensure system designs meet operational and functional requirements.

•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.

•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.

•Researches technology advances for potential application to company business needs.

•Makes recommendations for technology investments.

•Works under minimal mentorship.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 1910108239
Job Location: OK City, OK
Duration: 6 months
Input Date: 10/25/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQW6QAM&URLSource=cjhunter

Design and Analysis Engineer 4

Description:
PDS Tech, Inc. is seeking a Design and Analysis Engineer in Berkeley, MO.

Summary:

Position Responsibilities:

•Understand and apply job practices, techniques, standards, principles, theories, and concepts

•Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements

•Develop statement-of-work and technical performance specifications

•Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle

•Test and validate to ensure system designs meet operational and functional requirements

•Resolve product integration issues and production anomalies

•Support fielded hardware and software over the entire product lifecycle

•Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

•Monitor supplier performance to ensure system integration and compliance with requirements

Prerequisites:

Preferred Qualifications (Desired Skills/Experience):

•Bachelor's degree in electrical or computer engineering is highly desired

•Applicants must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired

•Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired

•Ability to provide technical coordination with internal and external suppliers and customers is a plus

•Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred

•Knowledge of data system design, and architectures is desired

•Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired

Job Number: 1910108542
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 10/25/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Dave Goetz
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSReQAM&URLSource=cjhunter

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

�Leads work with customers to develop and document complex electronic and electrical system requirements.
�Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
�Leads work to test and validate to ensure system designs meet operational and functional requirements.
�Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
�Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
�Researches technology advances for potential application to company business needs.
�Makes recommendations for technology investments.
�Works under minimal mentorship.

EDUCATION:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182602
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Long Beach, CA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM

Job Number: 182329
Job Location: Long Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 10/11/2019
Last Updated: 12/05/2019

Design and Analysis Engineer 5

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Other job responsibilities may include

• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.

• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.

• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.

• Works with other to develop program test strategies.

• Manages performance of critical suppliers to ensure system integration and compliance with requirements.

• Conducts program independent reviews and reports results to program leadership.

• Provides critical support of fielded hardware and software over the entire product lifecycle.

• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.

• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

• Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Job Number: 1910108677
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJWQA2&URLSource=cjhunter

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 5 for an opportunity in Oklahoma City, OK

RESPONSIBILITIES:
� Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
� Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
� Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
� Works with other to develop program test strategies.
� Manages performance of critical suppliers to ensure system integration and compliance with requirements.
� Conducts program independent reviews and reports results to program leadership.
� Provides critical support of fielded hardware and software over the entire product lifecycle.
� Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
� Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
� Works under consultative mentorship.

REQUIRED EXPERIENCE:
Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

Job Number: 182841
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/06/2019
Last Updated: 12/05/2019

Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/06/2019
Last Updated: 12/04/2019

Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Development Engineer

Description:
PDS TECH INC is currently looking for a Development Engineer for our client in Santa Clarita.

Responsibilities include perform and report on testing relating to the development of engines, engine systems or other powertrain systems as required.
Collect Data from testing on dynamometers, test rigs, and any other external test facilities.
Subsequent analysis and reporting is required.
Development may include performance, cost function, drivability and/or reliability of engines, engine systems and/or powertrain components per project goals.
Must complete writing test requests, daily progress reports and test reports.
Present a concise presentation of testing results, analysis, conclusions and suggestions for future development as needed.

Requirements are: BS degree in (Mechanical/Electrical) Engineering with relevant automotive focus in studies and activities preferred.
1 to 3 years’ experience with Formula SAE or similar automotive or motorsports related projects a plus;
Experienced with 3D CAD software and reading schematic drawings.
Must have strong data analysis, problem-solving and report writing skills. Ability to utilize on-car data analysis software (logged data, telemetry, etc.); program software (MATLAB/Simulink, C+, Visual Basic, etc.) and analyze with simulation tools such as FEA, CFD, etc.
Must have the ability to work in team environment with minimal supervision, be self directed, detailed oriented.

If you are interested, please call DJ 714-384-0004 and send resume to: denglert@pdstech.com

Job Number: 1910108702
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 11/07/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTNsQAM&URLSource=cjhunter

ELECTRICAL ASSEMBLER

Description:
Displays knowledge of Electrical Theory and usage of NEC and NFPA 79 in the assembly of machines with AC and DC circuits. Reads engineering drawings to assemble, rebuild, and repair electrical components. Sets up and operates a variety of power tools (such as drill press, band saw and stud welder), to assist in the assembly of machines and components. Works unsupervised and provides training and cross-training to other employees. Coordinates with engineering personnel, and makes changes as required to update print packages.
ESSENTIAL DUTIES:
Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electrical equipment.
Assembles electrical components, sub-assemblies, and systems according to engineering drawings. Positions and aligns parts in specified relationship to each other. Mounts assembled components and attaches functional and cosmetic hardware such as caps, clamps and knobs.
Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures.
Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves. Tests for proper sequencing of machine operations. Assists R & D technicians and engineering in developing new equipment.
Sets up and operates a variety of hand tools such as drill press, saws, shear and break. Operates tow motor, pallet jack, hoist, pipe bender, pipe threader, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
Uses business system to enter time spent working on assemblies/sub-assemblies and to complete operations.
Uses PC to interface with programmable controllers and servo modules, transfer drive parameters and run diagnostics checks. Must be able to manually load programs into electrical components.
Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in house testing and field installation of machinery.
Coordinates with engineering to ensure Engineering Change Requests are submitted.
Ensures that Engineering Change Orders are processed and assembled.
Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
Assists other departments to optimize throughput.

Completion of a Vocational Diploma in an electrical-related field, or equivalent experience or training. Must be computer literate and capable of reading engineering drawings. Must have tools required to perform daily routines. Must be capable to set up and operate power tools. Possesses basic knowledge of oscilloscope. Position requires a team player who is quality conscious, industrious and detail oriented.

2nd shift Hours: Mon-Thurs 2:25pm to 12:55am, 4-10's
3rd Shift Hours: Mon-Thurs 9:30pm to 8:00am, 4-10's

Job Number: 1910107526
Job Location: Appleton, WI
Duration: 6 months
Input Date: 10/10/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fNb0QAE&URLSource=cjhunter

Elect Design and Analy Engr 3

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:

• Reviewing supplier and partner qualification data.

• Circuit Analysis/Layout/Design/Manufacturing.

• FPGA design/development/integration.

• Perform Trade Studies/Modeling.

• Cross-functional coordination and integration.

• Develop Design Requirements and Plans.

• Provide Engineering Support to Supplier Management Procurement Activities.

• Perform Engineering Investigations and Troubleshooting Efforts.

• Develop and perform Acceptance Test Procedures.

• Test Automation for aircraft modifications.

Other job responsibilities may include

• Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.

• Develops high-level and detailed designs consistent with requirements and specifications.

• Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.

• Supports Supplier Management with make/buy recommendations and other technical services of limited scope.

• Provides engineering support throughout the lifecycle of the product.

• Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

• Works under general mentorship.

Prerequisites:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Job Number: 1910108240
Job Location: OK City, OK
Duration: 6 months
Input Date: 10/15/2019
Last Updated: 12/06/2019

Elect Design and Analy Engr 5

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:

Assignments may deal with

• Reviewing supplier and partner qualification data

• Circuit Analysis/Layout/Design/Manufacturing

• FPGA design/development/integration

• Perform Trade Studies/Modeling

• Cross-functional coordination and integration

• Develop Design Requirements and Plans

• Provide Engineering Support to Supplier Management Procurement Activities

• Perform Engineering Investigations and Troubleshooting Efforts

• Develop and perform Acceptance Test Procedures

• Test Automation for aircraft modifications

Other job responsibilities may include

• Resolves complex issues on critical programs related to architectural approaches, requirements, specifications and design.

• Leads technical aspect of proposal preparation.

• Identifies critical performance measures and develops processes for computing them.

• Leads activities in support of Supplier Management with make/buy recommendations and other technical services.

• Coordinates engineering support throughout the lifecycle of the product.

• Develops new concepts for future product designs to meet projected requirements.

• Recommends and manages technology insertion.

• Works under consultative mentorship.

Job Number: 1910108674
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJ2QAM&URLSource=cjhunter

Electrical Design Engineer

Description:
The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:
• Digital and mixed signal design,
• Configurable logic (FPGA/firmware) design,
• RF Design and
• Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:
• Active Secret DoD Security Clearance or the ability to obtain and retain one.
• US Citizenship
• Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
• A self-motivated and effective communicator
• Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
• Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:
• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Experience with intellectual property generation (patents & publications)
• Team and project leadership skills
• Knowledge of software and/or FPGA code development
• Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree

Job Number: 1910107926
Job Location: Indianapolis, IN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/05/2019

Electrical Design Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Design Engineer II in Indianapolis, IN.

The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:

Digital and mixed signal design,
Configurable logic (FPGA/firmware) design,
RF Design and
Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:

Active Secret DoD Security Clearance or the ability to obtain and retain one.
US Citizenship
Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
A self-motivated and effective communicator
Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:

Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
Experience with intellectual property generation (patents & publications)
Team and project leadership skills
Knowledge of software and/or FPGA code development
Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree

Job Number: 1910107926
Job Location: INpolis, IN
Duration: 12 months
Input Date: 10/17/2019
Last Updated: 12/06/2019

Electrical Design Engineers

Description:
Degreed and non-degreed openings; wire harness and cable installation, EWIS, CATIA V5 or Mentor Graphics or NX

Job Location: Midwest
Input Date: 10/28/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann Mc Carthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Electrical Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking a Electrical Design and Analysis Engineer 3 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

OKC Electronic Products Group is seeking experience electrical circuit design engineers. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.

Assignments may deal with

� Reviewing supplier and partner qualification data.
� Circuit Analysis/Layout/Design/Manufacturing.
� FPGA design/development/integration.
� Perform Trade Studies/Modeling.
� Cross-functional coordination and integration.
� Develop Design Requirements and Plans.
� Provide Engineering Support to Supplier Management Procurement Activities.
� Perform Engineering Investigations and Troubleshooting Efforts.
� Develop and perform Acceptance Test Procedures.
� Test Automation for aircraft modifications.

Other job responsibilities may include

� Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
� Develops high-level and detailed designs consistent with requirements and specifications.
� Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.
� Supports Supplier Management with make/buy recommendations and other technical services of limited scope.
� Provides engineering support throughout the lifecycle of the product.
� Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
� Works under general mentorship.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

WORK HOURS: 7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182607
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking 3 Electrical Design and Analysis Engineer 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182646
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/28/2019
Last Updated: 12/05/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer to provide direct support to Project Manager by interfacing with critical electronic component & subsystem suppliers. Manage engineering projects of moderate to large size and significant complexity, and of strategic importance.

Must have working knowledge of creating and integrating moderately complex electrical designs using CAD systems.

Job Number: 47407
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 10/31/2019

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Engineer

Description:
We have a great opportunity for Electrical Engineer in Saginaw, Michigan

This is six-twelve month contract with Direct hire possible after six months.

Consultants assigned to the Company must be degreed [minimum of a Bachelor of Science in Electrical Engineering, Masters a plus] electrical engineers with expertise in actuator systems, including but not limited to, solenoids, linear or brushed motors.

Consultants assigned to the Company must sign the Undertaking referenced in Section 9 of the Non-Disclosure Agreement prior to starting employment.

Duties:

Support the Company’s Sr. Electrical Product Engineer’s current project with a potential Customer;

Must have an in-depth understanding of how solenoids and linear motors are designed and the optimal processes for manufacturing these components;

Create a statement of requirements for the supplier;

Define and oversee the design validation of electrical components;

Help to define assembly level test requirements for function and quality

Assist with the evaluation of each suppliers’ design and manufacturing proposal

Will be in direct communications with Suppliers and be able to communicate technical information with a clear understanding.

Launch experience is a plus.

Mechanical electrical background a plus.

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Number: 19-33545
Job Location: Saginaw, MI
Rate: 100000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-08-13 00:00:00.0
Input Date: 08/13/2019
Last Updated: 12/05/2019

Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 12/05/2019

Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Ronkonkoma, NY )

Description:
Electrical Engineer ( Ronkonkoma, NY ) 9613193
12 Month Contract

Pay Rate: $50-60/hr

*Job Duties:
- Candidate will be responsible for supporting test program activities in the Aerospace Propulsion Laboratory.
- Under the direction of senior engineering, the individual will be responsible performing a variety of basic engineering tasks associated with the analysis, design, or testing of electronic and data acquisition systems as well as developing, creating and modifying computer applications software.
- Effectively communicate and portray design approach and functionality to other team members and lab users.
- Apply theoretical knowledge and engineering technical principles under the guidance of senior engineers to solve basic electrical engineering problems.
- Create block diagrams, wiring diagrams, interconnect diagrams, and detailed assemblies.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs.
- Development, integration, and documentation of laboratory systems, electrical cable designs and electrical assemblies for test facility.
- Design, integrate, and troubleshoot electrical designs of a functional system including commercial off the shelf (COTS) electro-mechanical components such as connectors, relays, switches, circuit breakers, etc.
- Test procedure, script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Establish requirements and procedures to evaluate purchased equipment or EEE parts. Under supervision, supports the testing and/or evaluation/ validation of one or more elements of an electrical.
- Assist with the development of review material, reports, documenting and presenting findings.

*Education Requirements:
- BS in Electrical Engineering & 2 years, OR Master’s Degree in Electrical Engineering.//

Job Number: 9613193
Job Location: Ronkonkoma, NY
Rate: 50-60
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 10/31/2019

Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - A220

Description:
Responsible to manage non-conformity/concessions and late changes to support production and to update the master data for the documentation package that accompanies the aircraft. Responds to technical questions, prepares new modifications for country specific constraints and explains about work orders and drawings, especially for aircraft (A/C) mechanical related items. Establishes and maintains effective communications with FAL production. Responsible for on-site training of new manufacturing engineering employees.
Qualifications/Basic Job Requirements:
The incumbent should have 5 years of relevant experience, preferably in manufacturing engineering of structure installations in an international aviation company.
Knowledge of the principles, practices, methods and tools used in manufacturing engineering.
Knowledge about non conformities/concessions and design query notes.
Knowledge of supply chain management.
Knowledge of quality management system.
Good knowledge of basic written and spoken English.
Experience working with A220 Aircraft
Education/Special Qualifications:
Must have a degree in Industrial Engineering, Mechanical Engineering or Aerospace Engineering or an equivalent combination of education and experience.
Other desirable skills and experience include:
Knowledge of Airbus Industries mechanical process & methods.
Knowledge of Airbus IT-Tools (TiCon, Zamiz, TAKSY, MODA, DocMaster, Adress).
Knowledge of common applications such as SAP/R3 (Module PP/PM).
Familiarity with the American aviation market.
Aircraft Technician experience from A/C manufacturer.
Knowledge about aircraft structure installation.
Knowledge of rules for aircraft design and manufacturing.
Intercultural experience.
Knowledge of health, safety and environmental regulations and practices.

Job Number: 1240535
Job Location: Mobile, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 11/15/2019

Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Lexington, KY
$21.50/hr - $68/hr
1 year W2 contract
First Shift, 5/40
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Requires a BSEE from an accredited University.

Job Number: 11310
Job Location: Lexington, KY
Rate: 45.00-68.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/09/2019
Last Updated: 12/04/2019

Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC

Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.

Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 10/29/2019
Last Updated: 12/05/2019

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication

Job Location: South
Input Date: 07/15/2019

Firm Name: PDS TECHNICAL SERVICES
Email: epetersen@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc

Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/15/2019
Last Updated: 11/15/2019

Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with Active Secret Clearance

Description:
Electrical Engineer

Location: Lexington, KY

6 month contract

Active Secret Clearance required.

Ideal candidate will have BS+6-10 years of experience or MS+ 4-8 years of experience.

The Electrical Engineer will research, develop, design, and test electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised C-5 manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches).

Candidate will be part of a team effort to develop C-5 wiring from design to installation, to include liaisoning between C-5 Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to specifications.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

Job Number: 58182
Job Location: Lexington, KY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: 11/11/19
Input Date: 11/01/2019
Last Updated: 11/06/2019

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.

About the Job:

§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.

§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.

§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.

§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.

§ Work with product development team to integrate digital elements with other parts of the product design.

What you Need:

§ BSEE/BSET or equivalent is required.

§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.

§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.

§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.

§ Familiar with PCB Layout practices for high-speed digital circuits.

§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)

§ Experience with Bluetooth / WiFi radios and circuitry is a plus.

§ Experience working with ARM processor platforms.

§ Experience with memory interface circuits such as DDR.

§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.

§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.

§ Good technical and non-technical communications skills.

§ Project planning skills.

Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 12/05/2019

Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electrical Engineering Test Tech

Description:

PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:

Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
Maintain documentation of testing and equipment operation.

BASIC QUALIFICATIONS:

Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
Knowledge of analog and digital symbol identification
Knowledge of test practices and procedures.
Personal computer skills required to configure and load software
Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

EDUCATION AND EXPERIENCE:

Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.
2 years related experience and/or training; or equivalent combination of education and experience.

QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:

Valid State Driver’s License
Must be DoD Clearance Eligible

PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions

Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

Electrical Engineers

Description:
Vehicle systems integration

Job Location: OH/MI/IN
Input Date: 01/14/2015

Electrical Installer

Description:
Chipton-Ross is seeking an Electrical Installer for an opening in Cypress, CA.

RESPONSIBILITIES:
An Electrical Installer is responsible for installation and attachment of aircraft interior electrical components using engineering drawings, company and customer specifications.
" Adheres to company specifications, work instructions, engineering prints and work orders.
" Documents the materials used in the process to maintain traceability.
" Interprets and reads engineering drawings to ensure accurate part manufacturing.
" Installs wire harness, electrical control modules, electrical connectors and other electrical assemblies or components, using installation drawings, wiring diagrams, customer and company specifications.
" Performs intricate tasks including stripping, crimping and soldering of wires.
" Uses hand tools and manually operated machines and uses of electrical equipment, such as heat guns and soldering irons.
" Confers with Quality Inspectors and Electrical and Design Engineers to resolve electrical installation problems, incomplete documentation and data interpretation

REQUIRED EXPERIENCE:
Minimum 2 - 5 years.
Computer Skills: Basic skills
Other Skills: The ability to read and write at a level necessary for successful job performance.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
5:00 pm -1:35 am pm must be available for OT
Full-Time

Job Number: 181905
Job Location: Cypress, CA
Rate: $14 to $18.00 DOE
Duration: 6 Months
Input Date: 09/23/2019
Last Updated: 12/05/2019

Electrical Integration Engineer

Description:
POSITION SUMMARY:
The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Provide engineering design and analysis of electrical systems and components.
2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
4. Work experience with EWIS standard design and wire separation requirements.
5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
11. Develops and implements engineering modifications and retrofits to completions in progress.
12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
14. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

REQUIRED SKILLS AND ABILITIES:
1. Proficient with SolidWorks.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
4. Aviation background and experience with electrical systems.
5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
6. Strong knowledge of industry electrical systems and documentation standards.
7. Experience with electrical systems and components.
8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
9. Requires reasoning/analytical skills to creatively design and problem solve.
10. Strong communication and problem-solving skills.
11. Strong time-management and organizational skills.

The Structures Company is an AA/EOE.

Job Number: 347
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/11/2019
Last Updated: 12/05/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

*Job Description
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

*Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 7+ years of experience required.

*Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and/or NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable

Job Number: 11794
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 2
Start Date: ASAP
Input Date: 10/29/2019
Last Updated: 11/26/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analy. Engineers - Many Needed

Description:
*Leads work with customers to develop and document complex electronic and electrical system requirements

•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.

•Leads work to test and validate to ensure system designs meet operational and functional requirements.

Email resume to: mmccarthy@pdstech.com

Job Number: Bo-OK-Elec/Systems
Job Location: Oklahoma City, OK
Rate: $74.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019

Electrical Systems Design & Analysis Engineers

Description:
BS Engineering degree; electronic and electrical systems requirements

Job Location: Midwest
Input Date: 10/28/2019

Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.

Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 12/05/2019
Last Updated: 12/05/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: shailendra.mishra@acsicorp.com
Website: www.acsicorp.com

Electrical Systems Design Engineer 3

Description:
**Requires the ability to obtain Secret Clearance**

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 374252
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 12/05/2019

Electrical Systems Design Engineer 4

Description:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374229
Job Location: Long Beach, CA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/15/2019
Last Updated: 12/05/2019

Electrical Systems Design Engineer 4 - Power Systems

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

•Leads work with customers to develop and document complex electronic and electrical system requirements.
•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
•Leads work to test and validate to ensure system designs meet operational and functional requirements.
•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
•Researches technology advances for potential application to company business needs.
•Makes recommendations for technology investments.
•Works under minimal mentorship.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374235
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 12/05/2019

Electrical Systems Design Engineer 5

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include
• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Works with other to develop program test strategies.
• Manages performance of critical suppliers to ensure system integration and compliance with requirements.
• Conducts program independent reviews and reports results to program leadership.
• Provides critical support of fielded hardware and software over the entire product lifecycle.
• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Works under consultative mentorship.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374254
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 12/05/2019

Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.

The Structures Company is an AA/EOE.

Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/11/2019
Last Updated: 12/05/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
• Technology focal for motor / motor controllers
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Preparation and presentation of technical data in design reviews
• Review and approval of Qualification Test Plans, Procedures and Reports

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical / Electronic Engineering, Master’s degree preferred
• 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

Knowledge, Skills and Abilities:
• Knowledge of aircraft electrical power systems
• Knowledge of system modeling and analysis tools
• Knowledge of motor / motor controller theory and application
• Knowledge of FAR Part 23 or 25 regulations preferred
• Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred

Job Number: 28-005
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019

Electrical Technician - Clearance Edwards AFB CA

Description:
166690
Job Title: Electrical Technician

Work Site Address: Palmdale, CA 93599
Job Number: 2504-1
Max Pay Rate: $32.64/hr
Start Date: 12/16/2019
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions

Job Number: JEG-2504-1S
Job Location: Edwards AFB, CA
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 12/05/2019

Electrical Technician - Clearance Nellis AFB NV

Description:
166689
Job Title: Electrical Technician

Work Site Address: Las Vegas, NV 89191
Job Number: 2505-1
Max Pay Rate: $32.64/hr
Start Date: 11/5/2019
End Date: 5/20/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
Work location is Nellis AFB

Job Number: JEG-2505-1S
Job Location: Nellis AFB, NV
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 12/05/2019

Electrical Technician - Secret

Description:
PDS Tech, Inc. is seeking PDS Tech, Inc. is seeking Electrical Technicians for our Aerospace client at Edwards AFB, CA
If interested / available please send resume to: denglert@pdstech

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.
Works from schematics, engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Technical Skills = Electrical Diagnosis/Repair
Technical Skills = Knowledge of Complex Mechanical/Electrical Concepts
Technical Skills = Knowledge of Electrical Technology
Technical Skills = Read Electrical Schematics
Security Clearance:= Secret

Job Number: 1910108154
Job Location: Edwards, CA
Duration: 6 months
Input Date: 10/18/2019
Last Updated: 12/06/2019

Electrical Test Rig Engineer

Description:
The Electrical Test Rig Engineer will:
• Manage small projects in development, coordinate and conduct technical reliability studies and evaluate engineering design concepts and understand and develop and analyze, reliability test plans.
• Recommend design or test methods and statistical process control procedures for achieving required levels of product reliability.
• Compile and analyze performance reports.

This position seeks a professional in the Electrical Test Rig Design field.

The candidate will provide professional electrical engineering and project management experience to designated projects and assignments.

Responsibilities include:
• Design, development, verify and document Electrical Test Rigs and Equipment used in acceptance testing of hardware.
• Designing, specifying, purchasing and constructing Electrical Test Rigs and electrical components for special test equipment.
• Creating work instructions for lab associates to assemble designed equipment and provide hands on involvement by being available to direct the work.
Prepare Rig “Operation Manuals” and continue to provide engineering support after release of the rig to the production area.

Job Number: 1910107866
Job Location: Windsor Locks, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/05/2019

Electrical Test Rig Engineer

Description:
PDS Tech is seeking Electrical Test Rig Engineers in Windsor Locks, CT

The Electrical Test Rig Engineer will:

Manage small projects in development, coordination and conducting of technical reliability studies and evaluation of engineering design concepts and understands and can develop and analyze, reliability test plans.
Recommend design or test methods and statistical process control procedures for achieving required levels of product reliability.
Compile and analyze performance reports.

This position seeks a professional in the Electrical Test Rig Design field.

The candidate will provide professional electrical engineering and project management experience to designated projects and assignments.

Responsibilities include:

Design, development, verify and document Electrical Test Rigs and Equipment used in acceptance testing of hardware.
Support of Systems that process methods and procedures for calibrating measurement and test equipment based on analysis of measurement problems, accuracy and requirements.
Working well with all functional groups and good communication skills at all levels are required.
Interfacing with Test Engineers, Program Personnel, and Space Lab personnel.
Designing, specifying, purchasing and constructing Electrical Test Rigs and electrical components for special test equipment.
Creating work instructions for lab associates to assemble designed equipment and provide hands on involvement by being available to direct the work.
Prepare Rig “Operation Manuals” and continue to provide engineering support after release of the rig to the production area.

Education:

Bachelors.

Job Number: 1910107866
Job Location: Windsor Locks, CT
Per Diem: No
Duration: 12 months
Input Date: 10/18/2019
Last Updated: 12/06/2019

Electrical Test Rig Engineer

Description:
Electrical Test Rig Engineer

Windsor Locks, CT
$37.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manage small projects in development, coordination and conducting of technical reliability studies and evaluation of engineering design concepts and understands and can develop and analyze, reliability test plans. . Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability. Compilation and analysis of performance reports.

Additional:
This position seeks a professional in the electrical test rig design field. The candidate will provide professional electrical engineering and project management experience to designated projects and assignments. Responsibilities include design, development, verification and documentation of electrical test rigs and equipment used in acceptance testing of hardware. This candidate may also support systems that, processes, methods and procedures for calibrating measurement and test equipment based on analysis of measurement problems, accuracy and requirements.

The candidate will work well with all functional groups and good communication skills at all levels are required. Candidate will interface with Test Engineers, Program Personnel, and Space Lab personnel. Responsibilities include designing, specifying, purchasing and constructing electrical test rigs and electrical components for special test equipment. Create work instructions for lab associates to assemble designed equipment and provide hands on involvement by being available to direct the work. The candidate will also prepare Rig 'Operation Manuals' and continue to provide engineering support after release of the rig to the production area.

Job Number: 11729
Job Location: Windsor Locks, CT
Rate: 37.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/17/2019
Last Updated: 12/04/2019

Electrical and Controls Engineer

Description:

PDS Tech, Inc. is seeking an Electrical and Controls Engineer, Muscatine, IA.

Summary:

Support the day-to-day electrical and instrumentation needs in a chemical manufacturing unit. This support may involve troubleshooting and some maintenance.
Together with process and mechanical engineers, develop scopes defining improvement projects (safety, yields, capacity, quality, reliability and cost improvement), including. alternatives and cost-benefit analysis, as needed.
Specify instruments (flow, pressure, temperature, etc.), control devices, motors, and other electrical components.
Review and evaluate vendor information for instrumentation and electrical components and determine suitability for specific projects applications.
Prepare maintenance plans for restoring and maintaining equipment to operating condition in a minimum amount of time, balancing repair cost and minimizing future failures.
Interacts with E&I maintenance technicians, production technicians, maintenance go-to, and others who work in and support the unit.
Create, modify and validate documentation related to process operations, safety, and applicable environmental regulations, as needed – including electrical drawings and engineering flow diagrams/P&ID diagrams.
Comply with plant safety rules.
Working knowledge of Engineering tools and software and ability to read and understand process flow diagrams, line drawings P&ID and schematics.

Basic Qualifications:

Requires a bachelor's degree in engineering and 2-5 years of experience in the field or in a related area.
Familiar with standard concepts, practices, and procedures within a particular field.
Relies on limited experience and judgment to plan and accomplish goals.
Performs a variety of tasks.
Works under general supervision; typically reports to a supervisor or manager.
A certain degree of creativity and latitude is required.

Job Number: 1910107243
Job Location: Muscatine, IA
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 12/06/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Trudy Pollard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM7EQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrician Maintenance

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Electrician Maintenance
(U.S. Citizenship Required*)
Fort Bragg, NC
2019-10167
Responsibilities:
• Repair, construct, install, troubleshoot, and maintain routine electrical systems and equipment.
• Cut, thread, bend, couple, and strap conduit.
• Cut wire and conduit to length.
• Install, repair, or replace switch boxes, light bulbs, plugs, sockets, light fuses, and extension cords.
• Disassemble motors, generators, and other equipment in preparation for repair.
• Troubleshoot electrical malfunctions, inspects circuits and wiring of shielding and grounding, and tests electrical equipment for safety and efficiency.
• Use blueprints, drawings, layout, or other specifications, and electrical hand tools and voltage-or-amperage measuring and recording devices.

Qualification:
• Possess a Secret or Interim Secret Clearance and be able to obtain a TS. Candidates that do not have a Clearance but can obtain one will be considered.
• This position supports a 5/40 work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 3+ years of experience, or a Master’s Degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2019-10167
Job Location: Fort Bragg, NC
Input Date: 11/06/2019

Electrician Maintenance NC

Description:
166833
Job Title: Electrician Maintenance

Work Site Address: Fort Bragg, NC 28303
Job Number: 2607-1
Max Pay Rate: $30.00/hr
Desired Start Date: 12/9/2019
End Date: 6/9/2020
Position Type: Contract

Job Summary:
Repairs, constructs, installs, troubleshoots, and maintains routine electrical systems and equipment.

Cuts, threads, bends, couples, and straps conduit. Cuts wire and conduit to length. Installs, repairs, or replaces switch boxes, light bulbs, plugs, sockets, light fuses, and extension cords. Disassembles motors, generators, and other equipment in preparation for repair. Troubleshoots electrical malfunctions, inspects circuits and wiring of shielding and grounding, and tests electrical equipment for safety and efficiency. Uses blueprints, drawings, layout, or other specifications, and electrical hand tools and voltage-or-amperage measuring and recording devices.

Qty 1 position

Job Number: JE-2067-1ATO
Job Location: Fort Bragg, NC
Rate: 30/hr max
Duration: 6 months
Input Date: 11/19/2019
Last Updated: 12/05/2019

Electro-optical/Infrared (EO/IR) Engineer

Description:
Chipton-Ross is seeking an Electro-optical/Infrared (EO/IR) Engineer for an opportunity in Wright-Patterson AFB, OH.

RESPONSIBILITIES:
� Provide technical inputs, assessments and management of program engineering efforts in support of the acquisition strategy for each case.
� Analyze EO/IR sensor systems architectures, HW and SW, to determine functionality and performance
� Research new technologies for EO/IR sensing and provide recommendations on approaches to incorporate into new sensors
� Evaluate development cost, schedule, and technical risks for sensor designs
� Prepare trade-space products that clearly communicate EO/IR sensor performance versus design and development cost and schedule
� Recommend sensor options that best meet technical and programmatic requirements. Assess EO/IR sensors and provides evaluations of avionics integration feasibility
� Recommend analysis, modeling and simulation, and test options that predict and verify system performance requirements throughout development
� Collaborate on EO/IR sensor teams proposing specific actions that lead to the highest performance EO/IR sensor capabilities. Verify on-going sensor development projects are meeting performance and programmatic milestones
� Participate in major events including System Requirements Reviews (SRRs), Preliminary Design Reviews (PDRs), Critical Design Reviews (CDRs), Program Management Reviews (PMRs), Technical Interchange Meetings (TIMs) and other technical/management activities
� Coordinate with the PMO to conduct in-country site surveys under the FMS program
� Support Installation and Check-Out (I&CO) of delivered sensor systems in customers� countries
� Evaluate the country infrastructures to support the operation, maintenance, storage, and staging of the sensor system
� Strong communication skills with customers, end users, and analysts in order to provide recommended contractual language to specific test-related sections of solicitations
� Perform other duties as assigned by management

REQUIRED EXPERIENCE:
Current EO/IR experience and knowledge of the DoD acquisition processes is preferred. Ideal candidate would have experience with system engineering processes and experience with FMS and sensor analysis.
Knowledge of systems engineering principles, verification and validation of requirements, and understanding the Air Force�s acquisition processes is desired

EDUCATION:
Accredited Bachelor's degree in Electrical or Electro-Optics, Engineering or a related field with at least 10 years' experience, or Master's degree with at least 8 years' experience.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

Job Number: 182401
Job Location: WPAFB, OH
Rate: $DOE
Duration: 4 months
Input Date: 10/11/2019
Last Updated: 12/05/2019

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T

Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 12/05/2019

Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environmental Effects Engineer

Description:
Electromagnetic Environmental Effects Engineer

Location: Fort Worth, TX

The Electromagnetic Environmental Effects (E3) Engineer is responsible for developing, managing and communicating the E3 methodology to internal and external customers.

Position Responsibilities:
• Applies engineering principles to investigate, analyze, plan, design, develop, implement, test, and evaluate air vehicle, weapons, and avionics with respect to E3 systems engineering.
• Develops and communicates E3 approach and methodology to management.
• Determines System level E3 targets and work with IPTs to develop IPT level targets.
• Performs air vehicle and systems level analyses to verify performance.
• Plans, supports, and leads E3 testing to meet qualification requirements.
• Works closely with IPTs to review evolving design and provide E3 input into their decisions, providing E3 impacts to all Design Decision Notices.
• Tracks, designs and develops E3 estimates based on preliminary and detail design layouts.
• Suggests design improvements / spiral opportunities to improve E3 performance.

Education Requirements:
• Bachelor's Degree in Engineering is required. Major in Electrical Engineering is preferred.
• Major in Aerospace Engineering or Mechanical Engineering may be considered with sufficient experience.
• Masters Degree is preferred.

Position Requirements:
• At least 9 years of E3 experience on airborne platforms.
• Expertise in aerospace design and verification processes to include requirements development and verification.
• Skilled in preliminary and detailed design
• Proficiency with MRP, Planning, Manufacturing is strongly preferred.
• Must have the ability to communicate efficiently and effectively to coordinate E3 activities, prioritize tasks, and report status.
• Must be able to build and maintain effective relationships with customers, internal
• and external suppliers, as well as horizontal integrations across the other teams.
• PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.
• Must have the ability to work effectively within a team.
• Good interpersonal and organizational skills are required.

EEO Statement Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.

This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)., Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. , The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

Job Number: 58193
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 10/30/2019

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Harrisonville, MO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

The Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a particular client site.

Position Summary

The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

Core Duties and Responsibilities

Maintenance and service of fuel cells at customer sites.

Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

Providing emergency support service to customers as required.

Purchasing tools, equipment, and parts for customer service and support as required.

May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

Exhibiting and enforcing safety procedures in the field or customer sites.

Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

Represent company in a professional manner at all times and in all interactions

Education and Experience

Minimum HS Diploma or equivalent with technical electrical coursework

Three (3) or more years of direct experience in mechanical and electrical troubleshooting

Formal training and education may be also considered in lieu of direct experience

Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

Must be able to lift 50 pounds on regular basis unassisted

Knowledge of lift truck operation and applications is highly preferred

General mechanical aptitude is required

Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

Excellent verbal and written communication skills

Creativity in solving technical problems

Ability to work independently

Uncompromising dedication to quality

Exceptional time management skills with the ability to handle multiple tasks

Punctual and reliable

Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company

Candidates must be open to shift, overtime, weekends and holidays.

Job Number: 19-32817
Job Location: Harrisonville, MO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 08/08/2019
Last Updated: 11/19/2019

Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Stapleton, CO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

Candidates must be open to working any shift, holidays, weekends and overtime. Specific schedule is to be determined; however, there is a possibility for 1st shift hours.

Position Summary

Core Duties and Responsibilities

Maintenance and service of fuel cells at customer sites.

Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

Providing emergency support service to customers as required.

Purchasing tools, equipment, and parts for customer service and support as required.

May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

Exhibiting and enforcing safety procedures in the field or customer sites.

Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

Represent company in a professional manner at all times and in all interactions

Education and Experience

Minimum HS Diploma or equivalent with technical electrical coursework

Three (3) or more years of direct experience in mechanical and electrical troubleshooting

Formal training and education may be also considered in lieu of direct experience

Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

Must be able to lift 50 pounds on regular basis unassisted

Knowledge of lift truck operation and applications is highly preferred

General mechanical aptitude is required

Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

Excellent verbal and written communication skills

Creativity in solving technical problems

Ability to work independently

Uncompromising dedication to quality

Exceptional time management skills with the ability to handle multiple tasks

Punctual and reliable

Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company

Job Number: 19-27729
Job Location: Denver, CO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-24 00:00:00.0
Start Date: 2019-07-22 00:00:00.0
Input Date: 07/08/2019
Last Updated: 11/25/2019

Electronic System Design and Analysis Engineer 3 - Support Equipment

Description:
**Active Secret Clearance Required to Start**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 374169
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 09/09/2019
Last Updated: 12/05/2019

Electronic Systems Design & Analysis Engineer 3

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Job Number: 374149
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 12/05/2019

Electronic Systems Design & Analysis Engineer 4

Description:
**Must be able to obtain a Secret Clearance**

Company is seeking Electrical Engineers with experience in Electronic Systems Design and Analysis for current and emerging programs in St. Louis, MO. Our EEs develop electronic and electrical system requirements using analytical and technical skills, translate requirements into system architectures and modify hardware and software designs for company aircraft, unmanned vehicles and much more.

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Position Responsibilities:
•Understand and apply job practices, techniques, standards, principles, theories, and concepts
•Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements
•Develop statement-of-work and technical performance specifications
•Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle
•Test and validate to ensure system designs meet operational and functional requirements
•Resolve product integration issues and production anomalies
•Support fielded hardware and software over the entire product lifecycle
•Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
•Monitor supplier performance to ensure system integration and compliance with requirements
•Bachelor's degree in electrical or computer engineering is highly desired
•Applicants must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired
•Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired
•Ability to provide technical coordination with internal and external suppliers and customers is a plus
•Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred
•Knowledge of data system design, and architectures is desired
•Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374248
Job Location: Berkeley, MO
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/04/2019
Last Updated: 12/05/2019