Job Search Results

881 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/10/22 Monday 07:00AM Pacific Time by ContractJobHunter. )

Listings 1 - 881

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
9 Mechanical Systems Design - Active Sceret Clearance

Description:
Active Secret Clearance Required (background investigation has to have been completed or updated within the last 5 years).
Experience with all type of aircraft systems design including, flight controls, ECS, fuel systems, wire routing, etc.  Must also have experience with UG (NX+), as well as Catia V5.  Apply knowledge of engineering principles and techniques to the design and development of mechanical or electrical operating systems. Ability to evaluate designs and perform trade studies for performance, functional adequacy, cost effectiveness, and regulatory compliance. Ability to develop specifications and oversee supplier hardware development, test, and certification programs. Knowledge of thermal analysis, stress analysis, material selection, packaging methods, routings and installation in aircraft environments. Knowledge of drafting and dimensioning fundamentals. Knowledge of three dimensional CAD software for development of details, assemblies, and installation drawings. Areas of expertise may include design of hydraulics, pneumatics, miscellaneous fluid systems, mechanisms, wire harness, and electrical equipment installation.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/27/2017
Last Updated: 07/11/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant

Description:
We are looking for an Administrative Assistant to work in our Recruiting / Sales Office in Lakeville, MA. This is a full-time position Monday thru Friday from 9:00 – 5:00. In addition to the general duties listed below, the Administrative Assistant will be asked to be the liaison to our Payroll and Finance Department located at our Corporate Office in Portland, ME.

Responsibilities:

The Administrative Assistant will manage the administrative day-to-day activities including, but not limited to:
* Answers, screens, and directs incoming telephone calls.
* Responds to routine and non-routine inquiries as appropriate.
* Schedules appointments, assists with travel plans, arranges meetings, and prepares required materials. May attend meetings and record and report on proceedings if necessary.
* Provide support to Salesman and Recruiters, as requested, and handle office issues as required. This also includes daily communication with Corporate Payroll and Finance Departments.
* Prepare and maintain reports, spreadsheets, data bases, and/or other software files and information.
* Organizes and maintains office and client files
* Opens, reviews and distributes incoming mail; also may prepare and ship outgoing mail or documents
* Perform all other position related duties as assigned or requested.

Experience / Skills:

* 1-3+ years’ experience of related work experience
* HS Diploma a must
* Must have a reliable vehicle for transportation
* Strong MS Word, Excel and general internet skills
* Strong attention to detail; excellent data entry and organizational skills
* Strong written and verbal communication skills
* Ability to work independently with minimum supervision

Preferred:

* Experience in a Recruiting / Sales environment within the Administrative Assistant field
* Experience recording and calculating commissions via Excel
* Associate’s / Bachelor’s degree in Human Resources or a related field


Mark A Ludwig
Vice President of Sales
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 - 6180
Toll Free: (800) 510 - 8050 x123
Fax: (508) 923 - 0005
www.globalamericanstaffing.com
 
Job Number: Admin
Job Location: Lakeville, MA
Rate: Open
Per Diem: N/A
Overtime: N/A
Duration: Perm Hire
Start Date: Feb 13 - Mar 13
Input Date: 01/18/2017
Last Updated: 09/14/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Aerospace Engineers for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform a variety of engineering work in designing, constructing, and testing aircraft
• Designs and supervises the construction of aircrafts and associated parts such as airframe, auxiliaries, communication equipment, controls, fuselage, and powerplant
• Responsible to ensure all issued Engineering instructions follow all client technical specifications and policies
• Responsible to make timely assessments of structural difficulty affecting maintenance or mod lines
• This includes SRM/AMM navigation, IPC interchangeability, AD/Service Bulletin/modification status, and compliance to all FAA standards (Fuel Tank Safety CCDLs, EWIS requirements, CMRs and AWLs)
• Responsible to coordinate trouble shooting and corrective actions (repair, modification, and inspection instructions) with maintenance technicians, managers, and foremen to minimize impact to the operations
• Must practice safety-conscious behaviors
• Working hours based on operational requirements including off-hours and weekend coverage
• Travel is required based on operational requirements

Basic Qualifications:

• Four year accredited undergraduate engineering degree required - Aeronautical/Aerospace, Electrical, Mechanical preferred
• Other Engineering degrees (such as Chemical, Civil, or Structural) will be considered
• Must possess leadership, communication, and technical credibility skills in the following areas: (1) Structural Analysis, including Statics, Mechanics of Deformable Bodies, Materials Science and Fracture Mechanic

Preferred Qualifications:

• At least 6 years’ of experience in the design and analysis of aircraft structural repairs
• Previous experience with aging aircraft structure is preferred
• Previous experience with aircraft Wifi structural modifications preferred
• At least 2 years’ of experience providing engineering support for line aircraft and live aircraft operations
• Candidates with fewer years of experience will be considered and if selected, on boarded according to experience
• Ability to analyze incomplete information, make timely decisions, develop innovative solutions, and mitigate risks to both safety and the operations
• Thorough knowledge of FAA regulations and/or familiarity with EASA regulations
• Excellent interpersonal skills and the ability to work effectively with all levels of engineering, maintenance, and planning
• Must be performing satisfactorily in present position
• Working knowledge of Microsoft programs (Word, Excel, Access) and AutoCAD (or similar CAD software)
• Candidate must be available for client's Technical Operations on-site job training and business familiarization required during the initial period of employment

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39204
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Repair Engineers - Everett, WA

Description:
STS AeroStaff Services is currently hiring Aerospace Repair Engineers for open positions in Everett, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Provide repair solutions for in service aircraft and aircraft in heavy maintenance. Applicant will have relevant airline, MRO, or OEM in-service support experience. Solutions consist of the engineering design and support documentation suitable for FAA and customer approval for modifications and/or complex repairs on aircraft and components. Duties will include accomplishment of task assignments as directed from a Project Lead or Engineering Management. Develop and substantiate engineering documents and provide assistance, mentorship, and training for less-experienced engineering staff, and interact with different members of internal and external organizations. Provide on-site support for shop personnel and act as on-site liaison for company engineering functions.

Job Duties:

• Develop and substantiate complex aircraft repairs using standard accepted industry practices
• Produce technical investigation for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, client, operations, and maintenance requirements
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed
• Background should be familiar with composite structures and components
• Provide written technical accomplishment instructions for complex aircraft and component repairs or modifications to maintenance, customer, and regulatory authorities as necessary
• Create various types of engineering drawings using common CAD software such as AutoCAD and Solidworks
• Ensure and confirm that all applicable customer, OEM, regulatory, and maintenance requirements are met
• Approve engineering documents within authorized signatory level
• Participate in the development of work statements and hour estimates in support of proposals
• Represent client on engineering technical matters with OEM’s, customers, operators, and regulatory authorities
• Monitor and approve engineering use of Customer, OEM, and other technical data to ensure compliance with all appropriate regulations and requirements
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions
• Lead activities of engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of modifications and repairs during maintenance and component overhaul visits
• Plan, review, organize, and prioritize engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules

Qualifications:

• Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of 7 years’ relevant aerospace experience or 15 years’ of equivalent aircraft design experience required
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered
• Ability to check 2D drawings and 3D models at the detail, assembly, and installation level
• Strong PC skills including the MS Office suite and computer drafting skills
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies
• Ability to understand and promote the policies / procedures of client, and client Engineering
• Ability to understand and apply the policies / procedures of all customer(s)
• Assertive communication skills
• Ability to work independently and follow through on assignments with limited direction
• Show positive attitude and volunteer for various assignments in order to complete program on schedule and budget
• Self-motivated and multi-tasker; able to level load own workload
• While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk or hear; and focus on objects close up
• The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl
• The employee may be required to lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39172
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer - Level 3

Description:
Applications Engineer - Level 3

Location: Lexington, KY
Pay Rate: DOE ($55/hr - $65/hr)
Duration: 1 year contract
Shift: First, 5/40, exempt
**MUST be eligible to obtain a DoD SECRET CLEARANCE**
**MUST be a U.S. CITIZEN**

Description
-This is an early to mid career position (5 to 10 years experience) for a Product Lifecycle Management (PLM) software administrator.
-The PLM Admin will be responsible for managing the daily operations and milestone events (e.g. upgrades) for the PLM software (Teamcenter) at the Special Operations Forces Support Activity (SOFSA) contract in Lexington, Kentucky.
-She / he will be part of the IT department and will work with the user community (primarily production engineering) to ensure the software meets the needs of the contract.
-This includes, but is not limited to, configuration settings, and workflow / report design and support.
-Gathers information concerning the capabilities of company products;
-Investigates the technical capabilities of company products and competing equipment;
-Stays abreast of developments in hardware and software;
-Analyzes customer problems; assists in designing systems to satisfy customer needs.
-Prepares equipment analysis to instruct sales force and customers in equipment capabilities.
-May prepare and present sales proposals.

Skill/Experience/Education (MANDATORY):
-PLM Experience: (4-5 years required)
-Application Administration (Server Side): (4-5 years required)
-CompTIA Security+ certification (required)

Desired:
-Teamcenter (Engineering or Unified)
-PLM data modeling experience
-Experience working with a Linux interface
-Experience writing custom handlers or extension rules
-Customer service experience working directly with users to answer questions and troubleshoot issues

Applicant Questions:
1) How many years of PLM Administration do you have?
2) What PLM software have you worked with?
 
Job Number: 7480
Job Location: Lexington, KY
Rate: 55-65
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Last Updated: 10/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Avionics Systems Designers for open positions in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Avionics Systems Designer duties are defined but not limited to system integration and installation design for complex avionics, electronics and electrical systems on helicopters and fixed wing airplanes including air transport. (Notes from the Hiring Manager: If the prospect knows AutoCAD 2012 or 2013, it is not much different than AutoCAD LT 2014 and can be taught. We would be happy to look at people that may not be degreed but have the experience and needed qualifications. E.G. The person that we were going to start was not degreed, but was a DER.)

Job Duties:

• Define systems integration and interface with existing onboard avionics, electronics and electrical systems and generate systems wiring diagrams for the defined systems interface
• Create electrical fabrication drawings (wire harness, coax cable, electrical/electronic assembly) for the defined systems integration and interface
• Create on aircraft installation drawings for the defined systems integration and interface
• Create detailed wire routing and clamping drawings for the defined systems integration and interface
• Generate parts list in Microsoft Excel and import into AutoCAD drawing for the installation and fabrication drawing
• Convert design data to Portable Document Format (PDF) files
• Create aircraft modification instructions (Engineering Order) with weight and balance and electrical load changes
• Create instructions for continued airworthiness and Technical publication such as AMM, IPC, FCOM, AWD, etc.
• Request guidance from engineer when uncertainty occurs
• Create detailed systems functional test instructions for the newly installed equipment/systems
• Conduct detail review of drawings completed by draftsperson or co-workers for accuracy
• Perform research and on aircraft survey as required for the assigned project
• Communicate with Supervisor, and other company employees concerning duties performed and results obtained
• Adhere to all client company policies, safety guidelines, and code of ethical conduct
• Other tasks as assigned by supervision and company management

Qualifications:

• Three years’ direct systems integration design experience
• Proficiency in Autodesk AutoCAD LT 2014 required
• Computer skills using Windows 7 and Microsoft Office
• Ability to work in a highly technical fast paced environment
• Ability to adapt to new software application and function with minimal training or by self-training
• Knowledge of Military Standards and Specifications, and SAE Standards and Recommended Practices
• Professional interpersonal skills over the telephone, via email and in person
• Read, write and communicate using English language and proper grammar sufficient to perform the job functions (due to the nature of the job, will be communicating in English)
• Professional office environment experience which required interaction with internal and external customers
• Work as a contributing member of a team
• Work within company published policies
• Knowledge and experience in Adobe Acrobat X Professional preferred
• Knowledge and experience in Adobe Illustrator Creative Suite 6 preferred
• Experience with Airbus ESPM and Boeing SWPM a plus
• Knowledge of 14 CFR Parts 23, 25, 27 and 29 a plus

Competency:

• Understand written and/or verbal instructions to successfully perform tasks
• Ability to work in a fast pace environment as part of a team
• Use computer based programs to clock in/out and perform other self-serve duties
• Use time efficiently
• Work in a fast paced environment
• React well under pressure
• Use computer based programs to clock in/out and perform other self-serve duties
• Be able to work efficiently with other employees as part of a team or individually

Working Conditions/Physical Requirements:

• The Avionics Systems Designer must be able to crawl in the aircraft and take photos on some specific area for design purpose
• Most often, the working conditions for the Designer is an office-type environment
• This position requires sitting for long periods of time
• The employee must rarely lift and/or move up to 10 pounds and/or move up to 25 pounds
• While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear
• The employee is frequently required to reach with hands and arms
• The employee is required to move quickly between work locations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36721
Job Location: Melbourne, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Avionics Systems Engineers for open positions in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Define systems integration and interface with existing onboard avionics, electronics and electrical systems and generate systems wiring diagrams for the defined systems integration and interface if the prospect knows AutoCAD 2012 or 2013 (it is not much different than AutoCAD LT 2014 and can be taught). We would be happy to look at people that may not be degreed, but have the experience and needed qualifications. (E.G.: The person that we were going to start was not degreed, but was a DER.)

Job Duties:

• Create electrical fabrication drawings (wire harness, coax cable, electrical/electronic assembly) for the defined systems integration and interface
• Create on aircraft installation drawings for the defined systems integration and interface
• Create detailed wire routing and clamping drawings for the defined systems integration and interface
• Generate parts list in Microsoft Excel and import into AutoCAD drawing for the installation and fabrication drawing
• Convert design data to Portable Document Format (PDF) files
• Create aircraft modification instructions (Engineering Order) with weight and balance and electrical load changes
• Create instructions for continued airworthiness and Technical publication such as AMM, IPC, FCOM, AWD, etc.
• Calculate modification or complete electrical load and generate the electrical load report for all flight phases as required
• Create detailed systems functional test instructions for the newly installed equipment/systems
• Provide guidance to the draftsperson and designer, and review completed drawings
• Estimate tasks schedule, prioritize tasks with little or no supervision and complete tasks within estimated schedule
• Perform research and on aircraft survey as required for the assigned project
• Perform project engineer function assigned by the supervisor as needed
• Communicate with Supervisor, and other company employees concerning duties performed and results obtained
• Adhere to all client company policies, safety guidelines, and code of ethical conduct
• Other tasks as assigned by supervision and company management

Qualifications:

• BSEE or BS Avionics Engineering.
• Thirty-six months direct systems integration design experience
• Proficiency in Autodesk AutoCAD LT 2014 required
• Computer skills using Windows 7 and Microsoft Office
• Ability to work in a highly technical fast paced environment
• Ability to adapt to new software application and function with minimal training or by self-training
• Knowledge of Military Standards and Specifications, and SAE Standards and Recommended Practices
• Professional presentation interpersonal skills over the telephone, via email and in person
• Read, write and communicate using English language and proper grammar sufficient to perform the job functions (due to the nature of the job, will be communicating in English)
• Professional office environment experience which required interaction with internal and external customers
• Work as a contributing member of a team
• Work within company published policies
• Knowledge of 14 CFR Parts 23, 25, 27 and 29 preferred
• Knowledge and experience in Adobe Acrobat X Professional preferred
• Knowledge and experience in Adobe Illustrator Creative Suite 6 preferred
• Experience with Airbus ESPM and Boeing SWPM a plus
• FAA systems certification experience a plus

Competency:

• Understand written and/or verbal instructions to successfully perform tasks
• Ability to work in a fast pace environment as part of a team
• Use time efficiently
• Work in a fast paced environment
• React well under pressure
• Use computer based programs to clock in/out and perform other self-serve duties
• Be able to work efficiently with other employees as part of a team or individually

Working Conditions/Physical Requirements:

• The Avionics Systems Engineer must be able to crawl in the aircraft and take photos on some specific area for design purpose
• Most often, the working conditions for the Avionics Engineer is an office-type environment
• This position requires sitting for long periods of time
• The employee must rarely lift and/or move up to 10 pounds and/or move up to 25 pounds
• While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear
• The employee is frequently required to reach with hands and arms
• The employee is required to move quickly between work locations
• Vision abilities required by this job include ability to read printed and computer displayed material

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36722
Job Location: Melbourne, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/05/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 10/15/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Design Drafter III in Elkton, MD #6958274/AS

Description:
Recruiter to Contact: Adam Salazar
Job title: Design Drafter III
Job Number: 6958274
Location: Elkton, MD
Compensation: DOE
Assignment Length: 6 month Contract
It is preferred that the candidate be Secret cleared up front; however, this is not required.

Responsibilities:
Orbital ATK in Elkton, MD is seeking to fill a position for level III CAD Design (Drafter) Tech .

Job responsibilities include:
• Prepare 3D models with associated 2D drawings using IDEAS and NX CAD tools from input that may be provided in the form of notes, sketches, general or specific instructions from Engineers in a field of specialization such as:
o Mechanical
o Tooling
o Electrical
o Electronics
• Assignments may require, but not limited to:
o Modeling and drawing components
o Portions of systems
o Modifications to existing models and drawings to improve products and facilitate manufacturing operations.
• Gather information
• Perform necessary calculations for sizing of part interfaces
• Coordinate design criteria with other Design Drafters, Engineering, Manufacturing and Tooling.

Candidate sought must be able to carefully follow verbal and written instructions, quickly adapt to processes and different CAD software in a fast paced environment. Candidate must be able to work thoroughly and accurately and be comfortable working extended periods of time at a work station.

Skills/requirements:
High School education
2 year relative Degree or certificate minimum with 4 years drafting experience preferred
Minimum of 2 years’ experience in use NX 10.0
Candidate to be confident in application of Geometric Dimensioning & Tolerancing
Experienced with ASME drawing standards
Experience as drawing checker a plus.
 
Job Number: #6958274/AS
Job Location: Elkton, MD
Rate: 37-47/hr W2
Per Diem: N/A
Overtime: TBD
Duration: 6 Months+
Start Date: ASAP
Input Date: 06/30/2017
Last Updated: 07/20/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer/Drafter (Electronic Packaging Designer) needed in Richmond, CA

Description:
Recruiter: Adam Salazar
Job Title: CAD Designer/Drafter (Electronic Packaging Designer)
Compensation: DOE
Location: Richmond, CA (Richmond refinery)
Assignment length: 12 Month+ assignment

Job Description:

Designer position

The Designer job function within D&E's Design Support Group receives direction from the Team Lead and is responsible to the project team for the accurate and timely development of all the electronic drawing requirements for Chevron’s Engineering Design Packages, Process Design Packages, studies and proposals for technology licensing in strict accordance to Chevron’s and Chevron Lummus Group’s (CLG) standards. Electronic drawings include but are not limited to the following: P&IDs, PFDs, PCDs, Material Selection Drawings and Plot Plans.

Knowledge of Siemens COMOS application software for Front-End Engineering Design is preferred.
AS/Diploma Drafting and Design or equivalent experience, demonstrated proficiency with AutoCAD and computer literate with proficient skills in Microsoft Word, Microsoft Excel, and Microsoft Outlook is required.

In addition, below is a summary of the other items we discussed:
• 4+ years’ experience
• Long term assignment (greater than 1 yr.)
• Dedicated personnel
 
Job Number: N/A
Job Location: Richmond, CA
Rate: 36.00/hr W2
Per Diem: N/A
Duration: 12 Months+
Start Date: ASAP
Input Date: 06/30/2017
Last Updated: 07/20/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter-Designer (KS)

Description:
The Engineering Draftsperson assists the Engineering Department in its daily operation. This position is responsible and accountable for ensuring the accuracy of all documents released from the engineering department. Duties include assignment of incoming request from Sales, Production, Quality and other all drafting personnel regarding documents. Documents include production prints, sketches for quoting, catalog, visual shop aids, engineering standards and MD manuals. Responsible for 3D modeling of plastic, die-cast and sheet metal components as required. Coordinates with engineers to create and finalize 3D models for designs and applications to meet customer requirements.

Primary responsibilities of the role:
• Works with Engineers as a team to develop documents to support customer and manufacturing request.
• Checks all drawings according to Engineering Standards, in order that the drawings may have a high standard of excellence for document release procedures.
• Update and maintains Production Print viewer for Current drawings, T-drawings, Tool drawings, Customer Scanned drawings and Vendor drawings. Work with engineers to resolve any issues relating to product print approval processes.
• Responsible for engineering document maintenance for accuracy of part numbers, technical information, general format, ease of reading and professionalism of the general layout.
• Creates Engineering Sketches as required. The sketches must be signed off by an engineer before releasing to the appropriate department.

Education/ Certification / Experience Required:
• Minimum of three years’ experience in a manufacturing environment
• Graduate from Certified Drafting Program or BS in related Technical Degree in the management of engineering documents.
• Demonstrated ability in AutoCAD, Inventor 3-D and/or Pro-E software
• A thorough understanding of Windows Office operating systems.

Education/ Certification / Experience Preferred:
• Experience in drafting and document control using 3D model and 2D print layout.
• Design experience with assembly, sheet metal, die-casting, and plastic injection molded components
• Autodesk Certification

Skills & Knowledge Required:
• Good written and verbal communication skills; active listener.
• Dedicated to meeting expectations and requirements of both internal and external customers.
• Ability to establish & maintain effective, trusting relationships with customers and able to keep their expectations in mind.
• Ability to sets goals & objectives and measures performance against goals and evaluate results.
• Quality, quantity and timely delivery of outputs are consistently within project goals and customer requirements.
• Conscientious in the allocation of resources; getting more things done with less.
• Provides goods and services that consistently meet or exceed the standards and expectations of their customers
• An independent, self-starter
• A team player. Always helpful and willing to help others succeed.
• Gets results because of excellence at planning, priority setting and execution.
• Eagerly learns new skills and capabilities to improve and sets learning new skills a high priority.

Physical Demands:
• Must present self with a professional appearance
• Extensive computer work
• Ability to climb stairs to get to office space
• Prolonged periods of sitting (desk job)

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-070717KS
Job Location: Wichita, KS
Rate: $20-25/HR BOE
Per Diem: No - Local Talent Only
Overtime: Possible
Duration: 3-4 Months or Longer
Start Date: ASAP
Input Date: 07/11/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CERT DOC WRITER

Description:
Must be a U. S. Citizen or Green Card Holder
CERT DOC WRITER REQUIREMENTS:
• Proficient with Windows and MS Office (Excel, Word, Visio, Etc.) and Adobe Acrobat
• Knowledgeable of Software configuration management practices and methods (Clear Case)
• Has an appreciation of engine control system, especially diagnostic controls
• Able to read and understand Simulink Diagrams
• Able to effectively work as part of a global team
• Able to organize and prioritize multiple tasks to meet deadlines
• Have strong problem solving and troubleshooting abilities
• Self-motivated and able to perform with minimal supervision
• Project management practices, methods and tools
• Familiar with Calterm, C2ST and Integrity a plus
CERT DOC WRITER EDUCATION & Experience:
• Bachelor’s Degree in Mechanical or Electrical Engineering required
• 2 years relevant experience required
 
Job Location: IN
Duration: LT
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: BILL AUSTIN & ASSOCIATES INC
Attention: Resumes
Address: 1244 WASHINGTON ST
City, State: COLUMBUS, IN 47201
Phone: 812/375-4011
Website: www.billaustin.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Chief Aviation Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements;
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes
• Enforcing the Zero Harm Culture and goals

Qualifications:

• Part 65 A&P or Repairman Certificate
• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs.
• Must be able to read, write and understand the English language
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39350
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Analyst 3 / Must be able obtain and maintain a DOD Secret security clearance CA

Description:
1593
Computer Systems Analyst 3 (Job Number: 17011453)

Number of Openings: 1

Location(s): United States-California-San Diego

Target Start Date: Jul 10, 2017

Title: Computer Systems Analyst 3

Rate: $40 - $55/hour

Location: San Diego, CA

Positions: 1 Total

Duration: 6+ Months

Shift: 1st Shift - 9/80

Position Summary / Responsibilities

%u2022Develops Business Applications and Project Visibility components such as user interfaces, data repositories, charts and dashboards.
%u2022Develops computer systems specifications that address business requirements and that fit with the company%u2019s system architecture standards.
%u2022Ensures hardware and software systems compatibility and coordinates and/ or modifies system parameters in terms of existing and projected computer capacity and capabilities.
%u2022Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.


Basic Qualifications:

%u20225 Years of related work experience with Bachelors in Science; 3 Years of related work experience with Masters; 0 Years of related work experience with a PhD.
%u2022Must be able obtain and maintain a DOD Secret security clearance


Preferred Qualifications:

%u20225 to 10 years%u2019 experience programming, proficiency with C#, .NET, SQL, SSIS, SSRS, and experienced 2010 or above with SharePoint developer and above average capabilities with the MS Office suite of tools.
 
Job Number: MB-17011453
Job Location: San Diego, CA
Rate: 55/hr max
Duration: 12 month contract
Input Date: 06/30/2017
Last Updated: 08/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Metrology Engineer II

Description:
Unique Skills:
Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 105981
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/07/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Senior User Experience Designer

Description:
Unique Skills:
Note: This is a contract position. You'll provide user experience guidance to business units including Sales, Marketing, Completions, Product Support, and Business Technology. You'll lead the day-to-day design of products that assist pilots in their flight-planning efforts, that facilitate collaboration between our interior designers and our customers, and that leverage industry-first AR/VR technology to allow our users to envision the future of products. You'll use design research methods to gather requirements from users and business stakeholders. You'll work in an Agile Scrum process and will be co-located with team members with roles as Scrum Masters, Developers, and Quality Assurance Analysts. You'll play a key role in the evolution of our mobile style guide into a system of design patterns. You'll help shape the look and behavior of our products, while working alongside stakeholders from our various business units. You'll build a living library of patterns, and help communicate its value to the organization. We'll be expanding the reach of User Experience from native apps to other parts of the business. This reach could include platform agnostic technologies and embedded software, which means experience with responsive design or physical UI controls are of added benefit.

Education and Experience Requirements:
Bachelor's Degree in User Experience Design, Graphic Design, Industrial Design, Human Computer Interaction or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience. 6 years experience as a UX professional.


Position Purpose:
Define interaction models, user task flows, and interface specifications. Communicate scenarios, end-to-end experiences, and screen designs to stakeholders and development teams. Typically responsible for ownership of a project or a significant product release. Formally or informally presents design concepts and deliverables to design team and internal stakeholders and gets approval to move projects forward and drive them to completion. Participates in both internal and external design reviews.

Principle Duties and Responsibilities:

Essential Functions: 1. Gather user needs via design research methods. 2. Communicate learnings and requirements to business colleagues. 3. Generate ideas via sketches, mockups, and prototypes for testing with users. 4. Research existing design patterns and best practices and apply to design problems. 5. Critique and refine design ideas with UX team members. 6. Create user tasks and conduct usability tests to evaluate concept directions. 7. Create mockups and prototypes to communicate desired directions to development team members. 8. Create final specs and assets for implementation. 9. Work collaboratively with developers to create solutions that find a balance between business needs, usability, and development effort. 10. Support and improve our existing portfolio of products.

Additional Functions: 3. Using knowledge of research methodologies and design patterns, mentors junior staff on UX competencies. 1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of performance. 2. Proactively communicates issues and status as required. Perform other duties as assigned.

Other Requirements: 1. Experience working in teams. 4. Experience with Agile Scrum development methodologies preferred. 3. A portfolio of work that demonstrates your skills, and the ability to articulate your role on the projects it contains.
 
Job Number: 94361
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service Representative

Description:
The Customer Service Representative will be responsible for the full range of customer service responsibilities on the order processing side from receipt to fulfillment.

Responsibilities:

~ Order Processing / Backorder Resolution
~ Order Tracking and Communication for Ship Window Compliance
~ Warehouse Communication for Special Handling and Problem Resolution
~ Customer Communication and Problem Resolution
~ ASN/Tracking using customer specific applications/Websites
~ Customer Compliance Research and Resolution

Experience / Qualifications:

~ High School degree required; Associates or above preferred
~ Effective communication skills and customer focused approach to problem resolution.
~ Working knowledge of SAP**
~ Basic Excel abilities

**SAP stands for Systems, Applications and Products in Data Processing. SAP is a software that develops Customer Relationship Management (CRM), a marketing software program designed to help businesses plan, execute and manage their marketing campaigns. SAP also manufactures a number of non-marketing software programs designed to manage finances, suppliers and human capital, among other aspects of business.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Phone: (508) 230-5030 x123
www.globalamericanstaffing.com
 
Job Number: 027_2017
Job Location: Baltimore, MD
Rate: Houly
Per Diem: Split Possible
Overtime: Yes
Duration: Temp-to-Perm
Start Date: ASAP
Input Date: 07/05/2017
Last Updated: 08/15/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Position Summary / Responsibilities
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes SOLIDWORKS computer-aided design software and Product Data Management (PDM) tools. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Perform drafting assignments including incorporating Engineering Change Orders to Drawings, Parts Lists and Assembly Drawings.

Leveling Factors:
Knowledge
Considerable Full knowledge of the job. Substantial acquaintance with and understanding of general aspects of the job with a broad understanding of the detailed aspects of the job.

Supervision Given and Received
Direct General supervision and instructions given for routine work and detailed instructions given for new activities or special assignments.

Typical Duties and Tasks
Duties & tasks are varied but standardized. Performs some more advanced functions. Resolves routine questions and problems, and refers more complex questions to higher levels.

Consequence of Errors
Errors may be detected and corrected but may cause moderate loss of time or customer/user dissatisfaction.

Contacts
Contacts are typically with individuals within own department and occasionally with contacts outside own organization. Contacts involve obtaining or providing information or data requiring some explanation or interpretation.

Typical Education / Experience
AA or other 2 year technical degree in related discipline and 1 year of related experience.
 
Job Location: Carpinteria, CA
Rate: OPEN
Duration: 12
Start Date: ASAP
Input Date: 07/10/2017
Last Updated: 08/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONIC CONTROLS ENGINEER – Power Generation

Description:
Must be a U. S. Citizen or Green Card Holder
ELECTRONIC CONTROLS ENGINEER JOB SUMMARY:

The candidate will apply specialized knowledge of engineering principles and practices to develop and support activities in electrical & electronics engineering for power generation products.

This specialized knowledge may include the following:
Design and Development the electrical and electronics specifications, systems and components of Electric Generators/Alternators and motors.
Electrical circuit design, simulating and analyzing performance of electrical power systems and electronic capabilities.
Design of algorithms, generation and implementation of controls software.
Tuning, verification, validation and release of controls hardware and software.
Troubleshoot, service and maintenance of controls, hardware, and software issues.
Managing component life-cycle obsolescence.
Use of electrical and electronic tools, tool interfaces, and information products.
Develop interconnects and harnesses including datalinks, communication networks, and machine electronics interfaces.

Electrical and Electronics includes all electrical and electronic elements within the system.
• Sensors and switches, actuators, mechatronics, electric motors, alternators/generators, and relays, ignition systems, battery systems.


ELECTRONIC CONTROLS ENGINEER KEY RESPONSIBILITIES:

• Applies technical expertise on complex components or projects with minimal supervision. Troubleshoots complex problems and recommends appropriate actions.

• Leads small projects or portions of large projects and can work cross-functionally. Assists with the transfer of knowledge; coaches and mentors less experienced engineers.

• Participates as a key contributor providing technical direction for a project or a project team and is accountable for project success. Influences at department or program management level by proposing innovative initiatives and demonstrated technical knowledge.

• Demonstrates depth of knowledge of engineering discipline(s) and leverages expertise and knowledge gained from other projects.


ELECTRONIC CONTROLS ENGINEER SKILLS:

• Demonstrated results indicating deep knowledge of managing execution.
• Coordinates performance across regions, teams, and departments on complex projects and work flows.
• Applies a broad range of planning and monitoring tools. Defines planning and review practices that result in few missed milestones and minimal surprises.
• Effectively delegates to ensure completion of complex projects and work. Monitors progress of others and redirects efforts when goals change or are not met.
• Measures effectiveness of execution through defined metrics and disciplined monitoring.


The skills will include one or more of the following:

Analog and digital circuit design of electronic hardware for control and/or power conversion systems.

Mechanical Design & Performance Requirements with an understanding of how electronic designs respond to mechanical environment conditions and methods required to validate designs for a specific environment.

Electronic Component Specifications to ensure our suppliers design and manufacture electronic components that satisfy the customer’s requirements for reliability and cost. Related skills include electromagnetic compatibility (EMC), mechanical environmental requirements, analog circuit design, and digital circuit design.

Electrical Environmental Requirements - must understand, and specify the characteristics of an electrical system with the goal of providing a system that will not be damaged or exhibit unacceptable performance during normal operation and potential failure modes.

Microcontroller functions and peripheral systems knowledge in sufficient detail to permit the design of an electronic controls system. Must be familiar with detailed block diagram of Interface MCU to other hardware.

Electromagnetic Analysis to calculate and analyze electromagnetic fields is a fundamental requirement of this role. This requires an understanding of the principles governing the interaction of electrical and magnetic fields, generally determined by Maxwell's equations. Must have practical knowledge to analyze, troubleshoot or improving existing electrical machines.


ELECTRONIC CONTROLS ENGINEER EDUCATION & EXPERIENCE:
• BS degree in Engineering required. Advanced degrees are preferred.
• Five or more years’ experience in a similar discipline.
 
Job Location: Minneapolis, MN
Duration: 12 mos
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: BILL AUSTIN & ASSOCIATES INC
Attention: Resumes
Address: 1244 WASHINGTON ST
City, State: COLUMBUS, IN 47201
Phone: 812/375-4011
Website: www.billaustin.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS HARDWARE ENGINEER

Description:
Must be a U. S. Citizen or Green Card Holder
Job Summary:
Apply engineering principles and practices to engine electronic control modules and similar componentry. Interact with suppliers and manage the work distribution by relaying requirements of the components to the suppliers. Communicate durability/longevity statistics and failure analysis to design teams, product teams and component suppliers. Verify and validate controls, hardware, and software while leading maintaining their release schedule.

Electronics Hardware Engineer Key Responsibilities:
• Understand the design and functions of electronics and electronic hardware
• Compose quality electronic component specifications
• Provide technical direction
• Ability to work cross-functionally with outside teams
• Ability to mentor/coach engineers with less experience
• Document related to design concepts, validation, and product release requirements


Electronics Hardware Engineer Skills:
• Utilize Six Sigma/Functional Excellence and associated Six Sigma Tools to improve work processes
• Comfortable in an electronics lab and using various test equipment including oscilloscopes, logic analyzers, power supplies, etc.
• Comfortable reading schematics, performance specifications, and dimensional drawings.
• Project management and communication skills
• Basic Electronic Controls Understanding and Capability
• Electrical/Electronic Design experience to facilitate root cause analysis and component assessments
• Strong technical and hands-on skills with demonstrated ability to provide solutions to a variety of technical problems of varying scope and complexity
• Basic assessment capability of one technology verses another.
• Problem solving skills
• Analytical data-driven problem solver and team player
• Design of Experiments, statistics, FMEA, FTA, etc.
• SW tools/skills: Microsoft Word, Excel, PowerPoint, Project, Minitab, etc.

Required 2 years’ Experience:
• In industrial and/or automotive electronics and the application of electronic controls to the operation of engines, exhaust treatment systems, transmissions or similar industrial embedded control systems.
• In the design of electronics employed in harsh environments including high temperature and high vibration applications.
• Training in Engineering Standard Work processes
• Six Sigma Tools including Design of Experiments, Fault Tree Analysis, boundary diagrams, and P diagrams
Environmental Testing of Components
Mechanical aptitude
• Must be highly Responsive to Requests
• Foster teamwork: Builds effective teams committed to organization goals; fosters collaboration among team members and among other teams.
• Communication & presentation skills: written & oral
• Customer Led Quality attitude
Education:
Bachelor’s degree minimum in material science, physics, electrochemistry, EET (BS Electrical Engineering preferred)
 
Job Location: IN
Duration: 12 mos
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: BILL AUSTIN & ASSOCIATES INC
Attention: Resumes
Address: 1244 WASHINGTON ST
City, State: COLUMBUS, IN 47201
Phone: 812/375-4011
Website: www.billaustin.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
US Citizen No Clearance Required

Diagnostics Engineer responsible for conducting detailed analyses and assessments of evolving and approved designs in support of the development of troubleshooting support documentation.

Familiarity with US Army logistics support structure, policies and procedures preferred

Ability to read and interpret schematics and hardware/software specifications.

Translating engineering & other technical information into troubleshooting source data (procedures and schematics) in support of Integrated Logistics Support (ILS) product development.

Conducting detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to fault isolate/troubleshoot and support the design

Proficient with MS Office applications (Word, Excel, PowerPoint, Access required; Visio preferred
 
Job Number: 40294
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret TX

Description:
158440/1251
Electrical Engineer - Level 3
Grand Prairie TX
60/hr
Active Secret
12 months

Description
Analog engineer is required to design a power voltage card to convert voltages between mature subsystems. The power voltage card will need to fit within an existing space. This effort will require part selection, design review, and design release. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in Cadence; have good communication skills.
Skill/Experience/Education
Mandatory:

Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). Bachelors degree in Electrical Engineering with five or more years of experience. Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting. Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes. Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills. Proficiency with electronic analyzers and other trouble shooting tools is required. Ability to develop system and subsystem performance requirements. Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Circuit Design Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 9-10 Years Yes
 
Job Number: JE-1251
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 07/20/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Level 3 / no clearance TX

Description:
Lockheed Martin MFC 1363
Recruiter to Contact
Job Title: Electrical Engineer Level 3
Job Number: 159148
Location: Grand Prairie, TX
Compensation: 12 month contract
No clearance
60/hr



Description
Subordinate to the Integrated Product Team Leader. Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings.
Skill/Experience/Education
Mandatory:

Electrical Engineering Bachelor of Science degree or similar experience.
10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense).
Strong understanding of requirements analysis, derivation, and verification.
Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.
Desired:

Hardware/Software verification and validation experience in a DO-254 or similar environment.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Hardware/Software Test Derive test requirements, generate test plan, generate test procedures, conduct test, generate test report. 4-5 Years Yes
DO-254 of similar Firm understanding and experience with verification process for safety critical systems. 4-5 Years Yes
Programmable Logic Design Understanding of programmable logic using FPGAs. Ability to read and understand VHDL and SystemVerilog. 0-3 Years No
 
Job Number: JE-1363
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 07/10/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 07/21/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 3 with active secret TX

Description:
Embedded S/W Engineer - Level 3
Description
Lockheed Martin Missiles & Fire Control is seeking a qualified Software Engineer to work in the Grand Prairie, TX office. As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus.
Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle. Active SECRET Clearance is required. Will need clearance status on resume. Needs clearance from the start.
Skill/Experience/Education
Mandatory:

The candidate should be a self-starter and possess the following skills:
• Secret Clearance Required
• BS in Computer Science, Software Engineering, or Related Field
• C/C++
• Razor (CM Control)
• ADA
• Linux (Red Hat)
• Domain Knowledge of Air and Missile Defense
• Seeker Programming and/or Integration
• Seeker Programming and/or Integration
Hardware-in-the-Loop (HWIL) Unit Under Test (UUT)

Desired:

Desired Skills:
• Razor (CM Control)

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Secret Clearance Required 4-5 Years Yes
BS in Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
ADA 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years Yes
Seeker Programming and/or Integration 4-5 Years Yes
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years Yes

Special Needs
There is No Special Needs For this Requirement
 
Job Number: JE-1270
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 06/28/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
US DOD Secret Clearance Required

C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy

Driver Development, Python, ROS, CODESYS
 
Job Number: 40247
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 06/21/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-C/C++ (4-5 Years experience)
-COTS SBC (0-3 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-VxWorks (4-5 Years experience)
-Git (4-5 Years experience)
-J1939 or CANBus experience (4-5 Years experience)
-Eclipse (4-5 Years experience)
-Embedded SW Engineering (4-5 Years experience)
-Ground Vehicles and Autonomy Experience (4-5 Years experience)

Desired:
-Driver Development (0-3 Years experience)
-Python (0-3 Years experience)
-ROS (0-3 Years experience)
-CODESYS (0-3 Years experience)
 
Job Number: 7297
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: $70/hr - $80/hr (DOE)
Duration: 6+ Month Contract
Shift: First, 9/80
*Active SECRET Clearance is required*

Description
As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle.

Skill/Experience/Education
Mandatory: (must meet all requirements)
The candidate should be a self-starter and possess all of the following skills:
• Secret Clearance Required: 4+ years of experience
• BS in Computer Science, Software Engineering, or Related Field: 4+ years of experience
• C/C++: 4+ years of experience
• ADA: 4+ years of experience
• Linux (Red Hat): 4+ years of experience
• Domain Knowledge of Air and Missile Defense: 4+ years of experience
• Seeker Programming and/or Integration: 4+ years of experience
• Hardware-in-the-Loop (HWIL) – Unit Under Test (UUT) Experience: 4+ years of experience

Desired:
• Razor (CM Control): 0-3 years of experience
 
Job Number: 7137
Job Location: Grand Prairie, TX
Rate: 70-80
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 03/02/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159151/1366
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: JE-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 07/18/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159150/1367
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience. Must have active/transferable Secret Clearance prior to submittal of resume.
Desired:

Driver Development, Python, ROS, CODESYS

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
COTS SBC 0-3 Years Yes
Linux (Red Hat) 4-5 Years Yes
VxWorks 4-5 Years Yes
Git 4-5 Years Yes
J1939 or CANBus Experience 4-5 Years Yes
Eclipse 4-5 Years Yes
Ground Vehicles and Autonomy Experience 4-5 Years Yes
Embedded SW Engineering 4-5 Years Yes
Driver Development 0-3 Years No
Python 0-3 Years No
CODESYS 0-3 Years No
ROS 0-3 Years No
 
Job Number: JE-1367
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 06/28/2017
Last Updated: 07/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159149/1368
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt



Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have active / transferable Secret Clearance prior to submittal and shown on resume.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework
Desired:

Domain Knowledge of Air and Missile Defense

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Modern C/C++ 4-5 Years Yes
Agile Product Development 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Boost Libraries 4-5 Years Yes
Web Services (SOAP/REST) 4-5 Years Yes
Jenkins 4-5 Years Yes
Continuous Integration 4-5 Years Yes
Qt Application Framework 0-3 Years Yes
 
Job Number: JE-1368
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 06/28/2017
Last Updated: 07/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II / entry level / Hydraulic / Control Systems / Technical Writing CA URGENT

Description:
159850/4405
Engineer II
Irvine CA
30-50/hr DOE
2-4 year experience


Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.

3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.

4. General knowledge of other related engineering and technical areas.

5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

· Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

* Special Requirements:

the emphasis should be on (in order of priority):
- BS Mechanical Engineering (or Aerospace or similar)
- Hydraulic experience
- Control systems experience
- Test experience
- Technical Writing (procedures / reports)

2-4 years exp.
 
Job Number: JK-4405
Job Location: Irvine, CA
Rate: 30-50/hr DOE
Duration: 6 month contract
Input Date: 08/02/2017
Last Updated: 09/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III / DO-178B ANSI C and Assembly CA

Description:
159927/4114
Engineer III
Irvine CA
48-58/hr DOE
6 month contract

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: JK-4114
Job Location: Irvine, CA
Rate: 48-58/hr DOE
Duration: 6 month contract
Input Date: 08/23/2017
Last Updated: 09/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Software - 4 with secret clearance to start FL

Description:
1607
Engineer Software - 4 (Job Number: 17015771)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jul 31, 2017

Title: Engineer Software - 4 (5)

Pay Rate: $57.00- $62.00/hr

Location: Melbourne, Fl.

Work Schedule: 9/80

Duration: 6 months

Clearance: Requires Interim Secret clearance to start

Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met

Duties include:

* Requirements analysis and decomposition (DOORS)
* Software Test Description (STD) Development
* Ada 95, C, C++, Python, Bash, Java, and other scripting language use may be required
* Use of secure coding principles
* Security+ Certification preferred


Basic Qualifications:
Bachelor STEM degree
9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
5 years experience in Ada 95 software development 3 years experience in C++ software development
Experience in Requirements Analysis and decomposition (DOORs)
Use of secure coding principles


Preferred Qualifications:
Master STEM degree
Expert in Ada 95 software development
Expert in C++ software development
3+ years experience in Requirements Analysis
3+ years of using secure coding
Security + Certified
 
Job Number: MB-17015771
Job Location: Melbourne, FL
Rate: 62/hr max
Duration: 6 month contract
Input Date: 08/02/2017
Last Updated: 09/25/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Data Modeler) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma principles

· Knowledge and understanding of business requirement analysis and design including: documentation of data and system architectures

· Ability to synthesize complex analytical findings into executive level communications

· Knowledge and understanding of data governance challenges and approaches: metadata, data quality, and data stewardship

· Ability to articulate a complex problem, design, or build strategy

· Familiar with The Open Group Architecture Framework and the Process Classification Framework

· Experience with SAP HANA Enterprise in Information Modeling, Database design, Data Provisioning, SAP HANA SQLScript, HANA Live and PAL

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Excellent verbal, written, and interpersonal communication skills

· 5+ years’ experience in data design, data architecture and data modeling (both transactional and analytic), Relational or Dimensional data design and modeling, DDL development and database design

Experience with data modeling tools
FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-500225KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Enterprise Data Architect) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.
Requirements:

Duration: Hiring Manager is wanting to hire direct. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma principles

· Knowledge and understanding of business requirement analysis and design including: documentation of data and system architectures

· Ability to synthesize complex analytical findings into executive level communications

· Knowledge and understanding of data governance challenges and approaches: metadata, data quality, and data stewardship

· Ability to articulate a complex problem, design, or build strategy

· Familiar with The Open Group Architecture Framework and the Process Classification Framework

· Experience with SAP HANA Enterprise in Information Modeling, Database design, Data Provisioning, SAP HANA SQLScript, HANA Live and PAL



Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Experience with Power Designer Data Modeling tool

· 5-10 years of overall Enterprise Data Architecture experience

Excellent verbal, written, and interpersonal communication skills

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501562KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (MES Solution Architect) Level 5 (KS)

Description:
esigns, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.
Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Excellent presentation and facilitation skills

· Able to work independently and efficiently to meet deadlines

· Able to multi-task multiple priorities in a fast-paced environment

· Self motivated, detail-oriented and excellent organizational and time management skills

· Team player with a ‘can-do’ positive attitude

· Able to coordinate deployments at multiple work sites – including international

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Experience with Apriso MES/MOM technology in the solution architecture space

· 5-10 years of overall MES experience, out of which minimum 4 years should be on Apriso Flexnet

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma, and supply chain principles

Familiar with SQL data architectures

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501558KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 3 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Mobile Solution Architect) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st
Little to no OT
No traveling involved
No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Excellent presentation and facilitation skills

· Able to work independently and efficiently to meet deadlines

· Able to multi-task multiple priorities in a fast-paced environment

· Self motivated, detail-oriented and excellent organizational and time management skills

· Team player with a ‘can-do’ positive attitude

· Able to coordinate deployments at multiple work sites – including international

· Strong knowledge of enterprise IT architectures, web services, and web protocols

· Ability to create robust and scalable high volume mobile applications, developing prototypes quickly.

· Citrix XenApp, XenDeskop, and XenMobile for application delivery, virtualization, and containerization

· Citrix Netscaler or comparable load balancing and micro-VPN infrastructure

· Familiarity with industry security requirements such as FIPS, NIST, and EAR/ITAR

· Familiarity with mobile communication apps and methods, including Exchange, Outlook, Skype for Business

· Popular mobile platforms, including iOS, Android, ChromeOS

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· 5-10 years of overall mobile architecture experience

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

Understanding of Lean, Six Sigma, and supply chain principles
FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501560KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 08/04/2017
Last Updated: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Flight Test Instrumentation Engineer

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First
Travel: Yes, approximately 20%

Unique Skills:
-Experience with RF Telemetry systems supporting Flight Test activities.
-Full working knowledge of IADS, TTC DAS, and network equipment configuration and installations.

Education and Experience Requirements:
Bachelor's Degree in related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Master's Degree preferred. 5 years of progressively responsible HR experience.

Position Purpose:
-The Instructional Design Consultant is responsible for leading the creation and maintenance of all formal and informal training solutions across the enterprise.
-Develops, enhances and updates the curriculum for all Company training in order to achieve enterprise wide training solutions.
-Responsibilities include planning, coordinating and developing strategic training initiatives for the enterprise.

Principle Duties and Responsibilities/Essential Functions:
1. Operates as an organizational leader and internal consultant to management in the identification, development, and implementation of training solutions.
2. Demonstrates and utilizes effective needs analysis, project management, course development, and evaluation skills in all areas of the business.
3. Evaluates business needs to determine the appropriate learning strategies needed to meet organizational goals.
4. Collaborates with internal customers and subject matter experts to obtain knowledge of subject areas and develop targeted training curriculum that meets the identified needs of the business. Serves as internal consultant and project leader for instructional design/training related initiatives.
5. Works with other members of the training department to design training programs that are in alignment with adult learning principles and instructional design best practices.
6. Responsible for coordinating the design, development and editing of training assets with internal resources for both audio and visual communication.
7. Conduct needs assessment to understand the needs of the business. Based on the analysis of multiple sources of information, design, develop and revise training and development programs to achieve business objectives and improve on-the-job performance.
8. Analyzes training needs, develops and administers training plans and programs. Expert in the use and ability to develop others to use a wide range of media and design tools used to design and distribute course materials to all company locations.
9. Reviews external training materials for effectiveness, and recommends acquisition of materials that meet the company’s standards.
10. Advises and develops staff members in techniques and methods of developing and evaluating specialized materials and curriculum.
11. Evaluate course effectiveness, recommend and implement modifications based on quantitative and qualitative feedback. Evaluate the success of training effectiveness and return on investment.
12. Apply Kirkpatrick's Four-Level Training Evaluation Model to objectively analyze the effectiveness and impact of training.
13. Build and maintain a comprehensive knowledge of all company processes, procedures related to manufacturing and repair station.

Additional Functions:
1. Travel required. Approximately 20 percent. Perform other duties as assigned.

Other Requirements:
1. Consulting and project management skills, familiarity with a wide variety of training media and a strong foundation in needs assessment, adult learning principles, behavior modeling and competency assessment required.
2. Expert level knowledge of Word Processing software; Adobe Suite Software; Spreadsheet software; Design software and Project Management software.
3. Analytical skills and high-level of attention to detail.
4. Ability to multitask in a fast-paced work environment.
5. High-degree of flexibility and adaptability.
 
Job Number: 7325
Job Location: Savannah, GA
Rate: 70-77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/03/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineering Consultant

Description:
Unique Skills:
Experience with RF Telemetry systems supporting Flight Test activities. Full working knowledge of IADS, TTC DAS, and network equipment configuration and installations.

Education and Experience Requirements:
Bachelor's Degree in related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Master's Degree preferred. 5 years of progressively responsible HR experience.

Position Purpose:
The Instructional Design Consultant is responsible for leading the creation and maintenance of all formal and informal training solutions across the enterprise. Develops, enhances and updates the curriculum for all Gulfstream training in order to achieve enterprise wide training solutions. Responsibilities include planning, coordinating and developing strategic training initiatives for the enterprise.

Principle Duties and Responsibilities:
Essential Functions:
1. Operates as an organizational leader and internal consultant to management in the identification, development, and implementation of training solutions.
2. Demonstrates and utilizes effective needs analysis, project management, course development, and evaluation skills in all areas of the business.
3. Evaluates business needs to determine the appropriate learning strategies needed to meet organizational goals.
4. Collaborates with internal customers and subject matter experts to obtain knowledge of subject areas and develop targeted training curriculum that meets the identified needs of the business. Serves as internal consultant and project leader for instructional design/training related initiatives.
5. Works with other members of the training department to design training programs that are in alignment with adult learning principles and instructional design best practices.
6. Responsible for coordinating the design, development and editing of training assets with internal resources for both audio and visual communication.
7. Conduct needs assessment to understand the needs of the business. Based on the analysis of multiple sources of information, design, develop and revise training and development programs to achieve business objectives and improve on-the-job performance. 8. Analyzes training needs, develops and administers training plans and programs. Expert in the use and ability to develop others to use a wide range of media and design tools used to design and distribute course materials to all GAC locations.
9. Reviews external training materials for effectiveness, and recommends acquisition of materials that meet the company’s standards.
10. Advises and develops staff members in techniques and methods of developing and evaluating specialized materials and curriculum.
11. Evaluate course effectiveness, recommend and implement modifications based on quantitative and qualitative feedback. Evaluate the success of training effectiveness and return on investment.
12. Apply Kirkpatrick's Four-Level Training Evaluation Model to objectively analyze the effectiveness and impact of training.
13. Build and maintain a comprehensive knowledge of all Gulfstream processes, procedures related to manufacturing and repair station.

Additional Functions:
1. Travel required. Approximately 20 percent. Perform other duties as assigned.

Other Requirements:
1. Consulting and project management skills, familiarity with a wide variety of training media and a strong foundation in needs assessment, adult learning principles, behavior modeling and competency assessment required.
2. Expert level knowledge of Word Processing software; Adobe Suite Software; Spreadsheet software; Design software and Project Management software.
3. Analytical skills and high-level of attention to detail.
4. Ability to multitask in a fast-paced work environment.
5. High-degree of flexibility and adaptability.
 
Job Number: 17-689-99983
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Ops - Cargo Customer Care Representatives - Dallas, TX

Description:
STS AeroStaff Services is currently hiring Ground Ops - Cargo Customer Care Representatives for open positions in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Assist Customers with all cargo inquiries received through the Cargo Customer Care Center and Support
• Support the objectives of Cargo Management, Ground Operations, and the mission of client
• Follows the Basic Principles of Leadership and leads by example in all management practices
• Entertain and qualify all calls to the Cargo Customer Care Center (CCCC), answering Customer inquiries on cargo policies and procedures
• Process booking requests for human remains shipments
• Process and respond to cargo claims and refund requests, both verbal and written
• Assist Customers and Cargo Agents with tracing cargo shipments
• Process new cargo account applications
• Support and assist Cargo Management with operational projects
• Provide support to the Area Managers with sales/marketing projects and Customer Relations as needed
• Displays the client in attitude, appearance, attendance, cooperation, etc.
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee’s Leaders

Qualifications:

• High School diploma or equivalency required
• College course work or degree would be an asset
• Experience handling inbound telephone Customer Service and/or sales preferred
• Knowledge of air cargo policies and procedures would be an asset
• Ability to perform physical activities such as lifting, standing, sitting, driving, pulling, pushing, squatting, hearing, climbing, walking, kneeling, reaching, crawling writing, and speaking
• Ability to type and/or use a computer keyboard with sufficient speed and accuracy to meet demands of job
• Must be aware of hazardous situations and be able to handle emergencies as needed
• Must be able to comply with Company attendance standards as described in established guidelines
• Possess excellent organizational skills; including file maintenance and reporting
• Ability to solve problems by asking fact finding questions and utilizing multiple data sources
• Must be able to handle multiple situations simultaneously and difficult/demanding customer service issues
• Must communicate effectively by telephone
• Strong written communications skills
• Written communication (including email) must be professional in tone and audience appropriate
• Must be proficient in the use of current software, i.e. Microsoft Office (e.g., Outlook, Excel, Word, Access, and PowerPoint), Cargo point of sale system (SalesForce), etc.
• Must be able to utilize multiple applications simultaneously
• Must meet confidentiality expectations as to confidential, proprietary and sensitive company information
• Must be available to work a variety of shifts
• Must be able to travel occasionally and work extended hours on an as needed basis
• Must maintain a well-groomed appearance
• Must be a U.S. citizen or have authorization to work in the United States as described by the Immigration Reform act of 1986

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39286
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/12/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Resources Support 2

Description:
Human Resources Support 2

Location: Camden, AR
Pay Rate: DOE ($12/hr - $15.67/hr)
Duration: 4 month contract
**MUST be a U.S. CITIZEN**

Duties:
•Handle sensitive and confidential information
•Maintain employee records and prepare reports
•Provides information and produces simple correspondence as required
•Utilizes office equipment necessary for the completion of assigned tasks
•Performs related duties as assigned

Skills (Required):
•Familiarity with a variety of concepts, office practices, filing systems, record keeping, policies and procedures associated with functional areas of Human Resources
•Computer skills/systems and applicable software such as Microsoft Office, including Word, Excel, PowerPoint, etc
•Filing Skills
•Human resource administration
•Employee records

Desired:
•Presentation Skills and or experience
•College degree

Education:
-High School Diploma or equivalent and 2 years of related experience
 
Job Number: 7419
Job Location: Camden, AR
Rate: 12-15.67
Per Diem: No
Overtime: Possible
Duration: 4 mos
Start Date: ASAP
Input Date: 05/11/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret FL

Description:
159671/7222476
Job Title: Information System Security Officer (ISSO)
Keywords:
Number of Positions: 1
Remaining Positions: 1
Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
Skills: Minimum Qualifications
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

Additional Details
The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


Skills: Required
• CYBER SECURITY
• LINUX
Additional
Languages: English( Speak, Read, Write )

State/Province: Florida
City/Town: Jupiter


Start Date: 06/19/2017 Hours Per Week: 40.00
Est. End Date: 12/30/2017 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7222476
Job Location: Jupiter, FL
Rate: 52/hr max
Duration: 6 month contract
Input Date: 06/19/2017
Last Updated: 08/02/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret VA

Description:
159639/7213927

Job Title: Information System Security Officer (ISSO)

Number of Positions: 1
Remaining Positions: 1
Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
Skills: Minimum Qualifications
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

Additional Details
The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


Skills: Required
• CYBER SECURITY
Additional
Languages: English( Speak, Read, Write )

State/Province: Virginia
City/Town: Gainesville
Address: 5731 Wellington Road


Start Date: 06/05/2017 Hours Per Week: 40.00
Est. End Date: 06/01/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7213927
Job Location: Gainesville, VA
Rate: 67.50/hr max
Duration: 12 month contract
Input Date: 08/23/2017
Last Updated: 09/12/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lab Technician, Senior Specialist

Description:
• Provides testing services in support of the product development and qualification process.

Essential Functions:
• Assemble and test hydraulic components, using instructions provided, as directed.
• Construct test circuits using written instructions and/or diagrams/drawings as directed.
• Setup instrumentation and collect data as needed.
• Review and comment on Engineering Test Procedures prior to document release.
• Document test results per Test Procedures, Engineering procedures, or written instructions in accordance with Engineering Procedures.
• Work with Engineers, Lab Engineers, and Lab Management to investigate performance/design issues, analyze data, and troubleshoot assembly/test processes uncovered during component testing.
• Create programs utilizing required software for simple to moderate test requirements.
• Cleanliness of test lab to include 5S activities.
• The ability to work flexible hours.
• Contributes to team effort by maintaining a positive outlook.
• Complies with all company policies and procedures, including safety requirements.
• Other duties as assigned to ensure customer needs are met.

Competencies:
• Read, understand, and effectively write English.
• Effective verbal communications in English with the ability to explain complex principles in common language.
• Ability to manipulate small parts.
• Ability to read intricate, small, and detailed writing with or without corrective lenses.
• Ability to work independently.
• Perform basic math (add, subtract, multiple, and divide) and elevated math (trigonometry and geometry).
• Perform basic computer skills, such as open and save files along with basic data entry along with preliminary data acquisition programming skills (i.e LabView).
• Ability to troubleshoot and problem solve electronic/technical/mechanical/electrical problems.
• Ability to read, understand and create drawings and schematics.
 
Job Number: 41-001
Job Location: Clemmons, NC
Rate: $29/hr
Per Diem: Yes
Overtime: Possible
Duration: 1 Year plus
Start Date: ASAP
Input Date: 06/20/2017
Last Updated: 08/08/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: Sacramento, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract
Shift: 1st Shift

**MUST be a U.S. Citizen**

Duties:
- Lead in preparation of detailed processing plans and fabrication instructions for cast and assembly of solid rocket motors, provide training to operating personnel, and perform root cause and corrective actions in response to discrepancies.

Skills:
- Required: Proficient use of MS Office software. 2 years’ minimum experience in defense/aerospace manufacturing engineering.
- Desired: Familiar with Siemens Teamcenter Enterprise 8 and Oracle E-Business Suite

Education:
- Bachelors in Science or Engineering minimum.
 
Job Number: 7613
Job Location: Sacramento, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 07/10/2017
Last Updated: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer CA

Description:
159856/7409723
Job Title: Manufacturing Engineer
Sacramento CA
45/hr max
6 month contract


Duties: Lead in preparation of detailed processing plans and fabrication instructions for cast and assembly of solid rocket motors, provide training to operating personnel, and perform root cause and corrective actions in response to discrepancies.
Skills: Required: Proficient use of MS Office software. 2 years' minimum experience in defense/aerospace manufacturing engineering.
Desired: Familiar with Siemens Teamcenter Enterprise 8 and Oracle E-Business Suite


Education: Bachelors in Science or Engineering minimum Skills and Experience:
Required Skills:
MANUFACTURING ENGINEERING
MANUFACTURING ENGINEER
SIEMENS PLC

# of Positions: 1

Location:
Sacramento, CA
Hwy 50 and Aerojet Rd., 95670

Schedule:
Start Date: 07/17/2017
Estimated End Date: 02/01/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
 
Job Number: MB-7409723
Job Location: Sacramento, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 08/01/2017
Last Updated: 08/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Planners - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Manufacturing Engineer Planners for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer - FTP is responsible for all manufacturing engineering aspects of defining, creating, and maintaining written FTP documents to include defining tooling, equipment, test equipment, and procedures for producing and testing aircraft at the client facility.

Duties and Responsibilities:

• Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable
• Define, review, and approve all FT requirements creating, maintaining, and writing FTP documents
• Define, review, and approve all FT tooling, equipment, and test equipment
• Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions
• Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production by coordinating with the various departments within client
• Review major Engineering and/or router changes with shop floor at the start of the respective Position and/ or at each Block Point change
• Create/ revise Master Routers for new/ revised Engineering for assigned A/C areas

Education, Work Experience, Certification, and/or Licensure:

• B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required
• 10+ years’ of experience performing, defining, and testing aircraft with complex functional systems including mechanical and fly-by-wire systems
• A combination of experience and education is acceptable

Knowledge, Skills, and Abilities:

• Must have knowledge of, but not limited to:
o Mechanical/ electrical rigging and troubleshooting of flight controls, landing gear, and hydraulics
o Loading and verification of airborne software
o Installing and troubleshooting avionics systems including TCAS, Radar, AFCS, FADEC, etc.
o Ability to review 3D drawings and models for Engineering designs and specifications to ensure manufacturability and process capabilities
• Working knowledge of computer systems, programs, etc. including, but not limited to, the following:
o CATIA V5/ V6 experience is a plus.
o Experience programming robotics a plus.
o Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system.
o SAP experience is a plus.
o Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s is a plus.
• Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
• Ability to analyze a variety of engineering data to help determine how to meet company objectives
• Program/Project management experience as a Mfg. Engineer:
o Experience with Program/ Project management in a fast paced work environment having reported progress to peers, direct supervision, and upper management with experience in plant floor scheduling, creating project files, Gantt charts, process flow charts, track job progress, assign resources, etc.
o Proven capability to direct the work of other Mfg. Engineers to support the defined build sequence a must.
• Quality Engineering experience as a Mfg. Engineer:
o Proven ability to define inspection methods and criteria as well as interpret results to drive processes per Six Sigma (or equivalent) standards.
o Six Sigma certification a plus.
o Strong knowledge of AS9102 processes, procedures, and methods a must with experience writing or creating a plus.
• Purchasing experience as a Mfg. Engineer:
o Ability to perform vendor cost analysis versus internal costs to determine best location for manufacturing.
o Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.
o Ability to read and understand LTA’s, P.O.’s, T’s & C’s, etc. a plus.
• Motivated self-starter able to work under minimal supervision.
• Experience in an IPT (Integrated Product Team) format is a must with experience as a formal or informal leader a plus.
• Promote and contribute to overall team environment, harmony, etc. is a must.

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39239
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler VA

Description:
159823/6419538
Job Title: Material Handler
Max rate $17/hr


Remaining Positions: 1
Duties: • Requires energetic individual to organize and maintain hardware/material storage area and re-stock the Kanban storage area for a busy production floor. 60%
• Records number of units of materials moved or handled on material forms. 5%
• Tracks hardware requirements in production schedule to ascertain materials or containers to be moved. 5%
• Works closely with material planner, technicians and facility manager to ensure hardware delivered to production floor on time
• Loads and unloads materials onto or from pallets, trays, racks, and shelves. 20%
• Follows all safety policies and procedures.
• Maintains the highest level of cleanliness and organization in responsible areas. 10%
• Utilizes bar-code scanning to track inventory and update Maestro/Oracle products
• Tracks tooling inventory and calibration cycles and submits move orders to transport to and from Gage lab for calibration
• Assists Manager with tracking training requirements in Sumtotal
Skills: Skills:
• Excellent attention to detail and organizational skills
• Ability to use a computer and to learn business software – Oracle, Maestro, Sumtotal
• Ability to convert and accurately use various units of measure (sq. feet to inches, metric to English, etc.)
• Experience working within an ISO controlled organization
Physical Demands
• Very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, etc.
• Frequently lifts or moves items over 25 pounds - There may be instances where a tool of up to 50 lbs will need to be moved. That would be a two-man lift however.
Required experience:
• Logistics: 1 year.
• Technical aptitude & basic knowledge of tools, calibration equipment desired.
• Knowledge of Maestro, Oracle and Sumtotal desired.


Education: • High school diploma or general education degree (GED)
• Higher education desired
• Training in logistics desired
Attachments:










Skills and Experience





Skills: Required
• MATERIAL HANDLER
• LOGISTICS
• DETAIL ORIENTED
• MATERIAL HANDLING
Additional
Languages:
Minimum Degree Required:
Also Preferred:











Location











Work Performed
Onsite:
State/Province: Virginia
City/Town: Culpeper
Address: 7499 Pine Stake Road










Schedule











Start Date: 03/20/2017 Hours Per Week: 40.00
Est. End Date: 08/31/2017 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-6419538
Job Location: Culpepper, VA
Rate: 17/hr max
Duration: 5 month contract
Input Date: 07/07/2017
Last Updated: 07/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
BA degree in Aerospace or Mechanical Engineering

Job Description:
• Responsible for the design and analysis of secondary flow system in gas turbine engines.
• Conduct analysis using Client internal design tools and/or commercially available analysis CFD packages such as CFX, Fluent or STAR-CCM.
• The candidate should have a strong background in subject matters such as thermal and fluid flow sciences.
• Candidate is expected to participate in design teams to perform multi-discipline engineering tasks associated with the design, development, and testing of engine secondary flow systems.
• Assigned tasks include but not limited to carrying out analysis of existing designs and new design, support engine and component rig testing, and associated data reduction/interpretation as needed.

Basic Qualifications
• Candidate must have a bachelor degree in Aerospace or Mechanical Engineering
• Minimum of 2 years of experience in design and analysis of thermal fluid systems. Master degree in lieu of experience
• Must be a US citizen or US permanent resident due to ITAR

Additional Qualifications
• Knowledge and experience working with CAD software is preferred.
• Ability to perform risk assessments and problem solving with root cause analysis.
• Ability to recognize and to utilize a teaming approach to resolve complex engineering problems.
• Strong written and oral communication skills
• Effective listening skills and flexibility in approach to resolve complex engineering problems.
 
Job Number: 17-32404
Job Location: Phoenix, AZ
Rate: 35.61
Per Diem: Possible
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 07/14/2017
Firm Name: NESCO RESOURCE
Attention: Dave Mahabir
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer
This position is responsible for development of complex electro hydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc.

The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team
 
Job Location: Torrance, CA
Input Date: 07/12/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineers - Torrance, CA

Description:
STS AeroStaff Services is currently hiring Mechanical Design Engineers for open positions in Torrance, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of our client. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

Job Duties:

• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent client in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports

Qualifications:

• 6+ years’ of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39348
Job Location: Torrance, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - CREO

Description:
The Sr Mechanical Engineer I is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.

Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

Required Skills:
CAD software, especially Creo.
Geometric Tolerancing (GD&T)
Able to present to customer
Maintain positive customer and supplier relationships
Ability to obtain security clearance
At least 6 years of professional experience

Desired Skills:
CAD software, especially Creo and Windchill
Hands on experience in Electro-optical sensors
Microsoft Project
Prior experience in DoD or Aerospace
Already possess a security clearance

Required Education:
A Bachelor's degree in Mechanical Engineering or related Engineering field
Prefer to also have a Master's Degree
Minimum 6 years related experience

This position requires a U.S. person or the ability to obtain an Export Authorization from the appropriate government agency for non-U.S. persons.
 
Job Number: JG372794
Job Location: Compton, CA
Rate: 65
Duration: 3 mos
Start Date: ASAP
Input Date: 07/14/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer II

Description:
7047859
Mechanical Engineer II
El Segundo, CA
50-60/hr
6 months

The Sr Mechanical Engineer I is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.

Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

Required Skills: • CAD software, especially Creo. • Geometric Tolerancing (GD&T) • Able to present to customer • Maintain positive customer and supplier relationships • Ability to obtain security clearance • At least 6 years of professional experience Desired Skills: • CAD software, especially Creo and Windchill • Hands on experience in Electro-optical sensors • Microsoft Project • Prior experience in DoD or Aerospace • Already possess a security clearance Required Education: • A Bachelor's degree in Mechanical Engineering or related Engineering field • Prefer to also have a Master's Degree • Minimum 6 years related experience
 
Job Number: 7047859
Job Location: El Segundo, CA
Rate: $50-60 HR
Duration: 3-6 month contract
Input Date: 07/17/2017
Last Updated: 08/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer II with Ability to obtain security clearance / CREO / Electro-optical sensors CA

Description:
7047859
Mechanical Engineer II
El Segundo, CA
50-60/hr
6 months

The Sr Mechanical Engineer I is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.

Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

Required Skills: • CAD software, especially Creo. • Geometric Tolerancing (GD&T) • Able to present to customer • Maintain positive customer and supplier relationships • Ability to obtain security clearance • At least 6 years of professional experience Desired Skills: • CAD software, especially Creo and Windchill • Hands on experience in Electro-optical sensors • Microsoft Project • Prior experience in DoD or Aerospace • Already possess a security clearance Required Education: • A Bachelor's degree in Mechanical Engineering or related Engineering field • Prefer to also have a Master's Degree • Minimum 6 years related experience
 
Job Number: MB-7047859
Job Location: El Segundo, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 08/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Metrology Engineer II
Savannah, GA
Long Term Contract
$45.00-50.00/Hr


Unique Skills:
Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
Languages Required (in addition to English): No Selection
 
Job Number: 7571
Job Location: Savannah, GA
Rate: 45.00-50.00
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/26/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mission Assurance Engineer

Description:
PGS Worldwide is seeking two Mission Assurance Engineers in Dulles, VA to create and implement mission/flight assurance plans for individual spacecraft flight hardware programs. This is a six month initial contract opportunity and I will respond immediately to all qualified applicants.

Job Duties:

1) Addressing design, manufacturing, integration and test activities in accordance with company and contractual requirements.

2) Work as a member of an integrated product team with Safety & Mission Assurance staff in hardware and software quality assurance, supplier assurance, configuration management, EEE parts engineering, materials engineering and occupational safety to address technical issues, meet program requirements and ensure mission success.

3) Interface with customers, vendors, and with Manufacturing, Integration & Test and Engineering organizations to identify and resolve mission/flight assurance issues.

4) Provide support to program Flight Assurance Manager in review of supplier and internal design/manufacturing/test documentation and processes, identification of non-conformance root causes, recommendation of effective corrective actions, and customer technical communication.

Requirements:

1) US Citizen

2) BS Degree and 5 years experience

3) Strong RCCA and AS9100 experience

4) Comfortable making complex presentations to large groups

5) Past experience working in commercial aerospace environment is a plus.
 
Job Location: Dulles, VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 07/07/2017
Firm Name: PGS WORLDWIDE
Attention: Patrick Lindsey
Address: 2315 NE SMOKEY HILL DR
City, State: LEE'S SUMMIT, MO 64086
Phone: 816/872-8260
Fax Phone: 816/272-1101
Website: www.pgsworldwide.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer - Numerical Control Programmer (OR)

Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. Must have Catia V5 Experience. See attached brochure for specifics on type of machine that the candidate must be able to program for.
 
Job Number: NCor
Job Location: Portland, ORE
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/09/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer

Description:
Numerical Control Programmer 3

Location: Portland, OR
Duration: 6+ Months

Job Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

Education / Experience:
- AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
- Must have Catia V5 Experience.
- See attached brochure for specifics on type of machine that the candidate must be able to program for.

- Looking for CNC Programmer familiar with programming for DMG Mori Dual Spindle Dual Turret Lathes or very similar type machine.
- Ideal candidate will be able to program this type of machine using Catia V5.
 
Job Number: 17-10488
Job Location: Portland, ORE
Per Diem: Yes
Duration: 6 months
Start Date: Asap
Input Date: 07/06/2017
Last Updated: 08/09/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Composites - Level 3 (KS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Requirements:
Level 3
Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience. Local Talent.

1st Shift

SKILLS NEEDED:
Catia V5 / True Nest
Composite machine processes
Ultrasonic knife cutting
Laser projection
Contour tape laminating or fiber placement
Ply kitting
Lay-up
Material curing

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-516397KS
Job Location: WICHITA, KS
Rate: $47-50/HR BOE
Per Diem: No Local Talent - Possible Split
Overtime: Possible, no guarantee
Duration: 6 months
Start Date: 07/07/2017
Input Date: 07/05/2017
Last Updated: 07/12/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (KS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

Location: Wichita, KS
Duration: 6 Months
1st Shift
OT is being worked
Not a lot of travel involved with this position.
Possible travel to McAlester
No Per Diem - local Talent Requested

SKILLS NEEDED:
Catia V5
3/5 axis
Vericut
MS Office
Primary soft/hard metal programming experience
SAP is helpful

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-494796KS
Job Location: Wichita, KS
Rate: $50/HR BOE
Per Diem: possible split
Overtime: Yes - Possible
Duration: 6 Months
Start Date: 7/7/2017
Input Date: 06/28/2017
Last Updated: 07/12/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmers with DMG Mori Dual Spindle

Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
 
Job Number: BO-OR
Job Location: Portland, ORE
Rate: $62.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 06/26/2017
Last Updated: 07/10/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - 6897131

Description:
The candidate will be involved with full-lifecycle software engineering and development of Specialized Test Equipment (STE) software for various RF systems and sensors. This includes planning, requirements development, design, CUT, integration, and testing of application-level and embedded STE software.

Required Skills: • 8+ years of technical experience in software engineering development. • Experience with Real-time operating systems such as VxWorks and/or INTEGRITY • Experience with low-level embedded device drivers and/or board support packages (BSP) • Strong ability to debug software and troubleshoot hardware issues. • Strong C/C++ experience. • Experience with one or more scripting languages; such as Python or Perl. • Experience with NI LabWindows CVI and/or NI TestStand. • Experience with Matlab. • Experience with GPIB, VISA, SCPI, 1553, VME, and/or VXI. • Experience with test equipment such as DMM, network analyzer, signal generator, power supply, power meter, spectrum analyzer, etc. • Ability to communicate and work effectively in a team environment. • Ability to operate with limited supervision, with extensive latitude for independent judgment. • Experience with Software Development Lifecycle methodologies such as Waterfall and Agile. Desired Skills: • Understanding of RF communication concepts and IQ data processing. • Ability to read timing diagrams • Ability to read schematics • Experience with GUI programming. • Experience with ATEasy. • Experience in ClearCase, ClearQuest, DOORS. • Familiarity with Coverity. • Experience or desire to lead a small team of 1-4 engineers. Required Education: • BS/BA in Computer Engineering, Electrical Engineering, Computer Science, or equivalent degree
 
Job Number: 6897131
Job Location: El Segundo, CA
Rate: OPEN
Duration: 12 Month CTH
Input Date: 08/28/2017
Last Updated: 10/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer - 6963370

Description:
These positions are for Software Engineers within the Raytheon Integrated Defense Systems, Electrical Design Directorate, Receiver Exciter and Signal Processing Department. The Receiver, Exciter and Signal Processing Department designs, develops, and integrates a number of different products and technologies relative to Radar systems. The Signal Processing Technology group within the Receiver, Exciter, and Signal Processing Department focuses on state-of-the-art processing technologies and distributed high performance computing architectures that are used to build next-generation Radar Signal Processing applications.

The Software Signal Processing Engineer position is located in Marlboro, Massachusetts, however you may also be able to work in the Tewksbury/ Woburn area. Responsibilities include working within Linux, Unix and Real Time Operating Systems developing C/C++ implementations of signal processing algorithms and time critical control functions involved in and direct control of sensor systems. This position will also include working closely with Software Architects and Principal Systems, Hardware, and Software engineers to interpret requirements and correctly implement these requirements in software.

Required Skills



8+ years of relevant experience



Multithreaded application development experience that includes testing and debugging in C++/C on Linux or Unix environments

Experience in developing and optimizing algorithms for performance.

Ability to translate system performance and operation specifications into software requirements, design, and test specifications

Bachelor's degree in an engineering or scientific discipline. Advanced degree desirable

Direct experience implementing complex signal processing algorithms in C++ meeting latency and throughput performance requirements or experience in implementing complex control operations in software with defined performance timelines Working understanding of parallelism and concurrency as applied to algorithm implementation on shared memory and distributed systems Experience in multithreaded, multiprocessor software development using pthreads, OpenMP, or MPI programming models on clustered deployments Experience developing applications for GPGPU and/or Intel Xeon Phi processors Familiar with software configuration management and development process control (i.e. CMMI) Experience in using version control tools such as ClearCase Continuous integration and test experience in a hardware/software laboratory environment Strong communication skills Ability to work independently and in a team High degree of creativity and ability to solve a wide range of difficult problems
 
Job Number: 6963370
Job Location: Marlborough, MA
Duration: 12 Months
Input Date: 07/18/2017
Last Updated: 08/03/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer / Electro-Deposition Plating / local only CA

Description:
159751
Job Title: Process Engineer / Electro-Deposition Plating
Keywords:

Number of Positions: 1
Additional Information: Manager is interviewing. Updated job description with the following:

-Over 5 years of experience in plating metallic parts & assemblies.
-Over 2 years of experience designing & building Electro-deposition (plating) fixtures.
-Over 2 years of experience using modelling software to manipulate hardware and tooling models -Over 3 years of experience writing process planning for plating operations.
-Recent experience with Electro-Deposition plating.

***Max rate is $55. Must be U.S. Citizens and able to interview in-person at own expense.

Duties: ** Candidates should have current experience with Electro-Deposition Plating **

** Local candidates preferred. If candidates pass a phone interview an in-person interview will be required. Must be able to attend an in-person interview at their own expense **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Applies engineering and quality procedures to support hardware requirements to assure that delivered products and/or services conform to contractual and Aerojet requirements.
-Support the electro-deposition of development hardware to support critical program schedules.
-Select and position electrodes /annodes, part and assemblies in process tanks to apply plating on metallic components.
-Be able to hand prep (sand) and mask hardware to ensure plating process meets specification and drawing requirements.
-Plan proper grouping and positioning of material to assure treatment to specifications.
-Maintain plating bath composition, temperature, and concentration.
-Have a basic electrical knowledge of electrical circuitry – anodic/cathode – positive/negative.
-Ability to calculate surface areas and determine current density for hardware.
-Knowledge in electroforming - ability to design and fabricate plating cells, shielding, and anode placement.
-Have experience working with hazardous chemicals and acids.
-General tool knowledge of power tools and hand grinders.
Skills: -Over 5 years of experience in plating metallic parts & assemblies.
-Experience working with hazardous chemicals, including acids.
-A proven safety record & experience with PPE used in plating.
-Basic electrical knowledge: electrical circuitry, positive/negative, anode/cathode placement, AC/DC power supplies, rectifiers.
-Experience preparing hardware surfaces for plating and fabrication/installation of tooling & shields to ensure parts meeting plating requirements.
-Over 10 years of experience in plating metallic parts is desired (not required).
Education: -High School Diploma or equivalent required.
-BS in Chemistry or Materials desired.
Languages: English Read Write Speak




Skills: Required
• PROCESS ENGINEER
• ELECTRO PLATING
Additional
Languages: English( Speak, Read, Write )




Work Performed
Onsite:
State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave



Start Date: 07/10/2017 Hours Per Week: 40.00
Est. End Date: 07/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7219144
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 12 month contract
Input Date: 07/05/2017
Last Updated: 07/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Management Engineer II (MO)

Description:
Training Systems and Government Services (TSGS) has a need for an experienced Product Lifecycle Management (PLM) engineer who will function in a Program environment in direct support of Product Lifecycle Management (PLM) activities.
These PLM activities are focused on tasks associated with Configuration Change Board (CCB) facilitation, software and hardware configuration management, and data configuration management. The successful candidate will perform the following tasks.
She/he will:
1. Perform baselines using ClearCase and ClearQuest and create media for software installations and deliveries, and will be responsible for maintaining and tracking all media.
2. Provide Configuration Management CDRL inputs to meet contractual requirements.
3. Assist with the documentation of Configuration and Data Management standards, processes and tools.
4. Track and report on Risks and Action Items Status.
5. Works under general direction.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
 
Job Number: ProdDMgmtMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/03/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Trainer 4 (Sensor Operator Instructor) Interim Secret Clearance required to start CA

Description:
1603
Product Trainer 4 (Sensor Operator Instructor) (Job Number: 17013191)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Sep 5, 2017

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: 3-30-18

Interim Secret Clearance required to start

Job Description:

The Product Trainer 4 is responsible for the development of training materials as well as the delivery of training to customers. Training development/delivery may include sensors such as Electro Optical/Infrared, lasers, SAR/ISAR radar, and electronic surveillance for use on unmanned autonomous systems. Training may also include mission planning, dynamic inflight re-tasking, and collection, exploitation, and dissemination of target imagery. It is expected that this individual will work with the Engineering, Software, and other key disciplines to gain extensive knowledge peculiar to these sensors in order to develop and deliver comprehensive training. Courseware development may include Instructor led presentations, Computer-based Training (CBT), or Interactive Courseware (ICW).

In addition, this position may require you to provide analysis of training requirements to facilitate new sensor capabilities and assist in defining training simulator requirements, as well as formal or informal briefings to our customers or Leadership with a high level of proficiency. This position may also be required to perform flight duties as primary flight crewmember.


Basic Qualifications:

Bachelor Degree plus 10 years of working experience as a curriculum developer and instructor; 8 years with a Masters. Possess strong writing skills, customer interface, and presentation and communication skills. Must have recent military UAV pilot experience including subject matter expert or curriculum development experience. Must be capable of obtaining a Secret clearance.

Interim Secret Clearance required to start.
 
Job Number: MB-17013191
Job Location: San Diego, CA
Rate: 50/hr max
Duration: 15 month contract
Input Date: 06/28/2017
Last Updated: 08/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Analyst I

Description:
Program Planning & Scheduling Analyst I
Savannah, GA
Long Term Contract
$30.00/Hr

Unique Skills:
Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

Education and Experience Requirements:
Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

Position Purpose:
Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principal Duties and Responsibilities:

Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

Additional Functions: 1. Perform other duties as assigned.
Languages Required (in addition to English): English
 
Job Number: 7074
Job Location: Savannah, GA
Rate: 30.00
Per Diem: $110/Weekly, Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/16/2017
Last Updated: 10/23/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer Contractors (Updated) - 6+ month contract

Description:
Keltia Design, Inc. is a technical support services company in the Seattle area supplying aerospace design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis.
We are looking for Two Quality Engineers for a 6month contract for our client. Must be versatile and detail oriented to assist in production support and FAA product conformity. The position will be heavily engaged with engineering, program management, customers, suppliers, and manufacturing. The individual must know the important elements in hardware and engineering, have a great sense of detail, know how to take on various duties in a short time, and be able to take initiative when needed.
-Bachelor’s degree or Associates Degree with 5-10 years’ experience
-Excellent interpersonal communication skills (verbal and written)
-Strong background in electronic manufacturing and engineering development environments
-Quality Engineering Process for DPO-178C Software Design Considerations
-IPC Workmanship andJ-STD-001 Soldering Inspection certification
-ANSI Y14.5 GD&T knowledge
-Administration of AS9100 Quality Management System
-Familiarity with AS102 First Article Inspection
-Ability to read/interpret part and assembly drawings
-Create inspection plans
-Metrology/Measurement
-Familiarity with military and commercial standards
-Experience with working with customers
 
Job Number: QE99002
Job Location: Redmond, WA
Rate: Open
Per Diem: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 07/21/2017
Firm Name: KELTIA DESIGN INC
Attention: Mary Arneson
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 1st Shift - NC

Description:
Uses pre-determined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects defective or malfunctioning units or systems.

Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.

In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:

We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend. They would need to have prior Aircraft Inspection experience and preferably have composite experience also.
 
Job Number: FD-519366NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 06/21/2017
Last Updated: 08/14/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 2nd Shift - NC

Description:
Uses pre-determined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.
In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:
We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend. They would need to have prior Aircraft inspection experience and preferably have composite experience also.
 
Job Number: FD-519654NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 06/21/2017
Last Updated: 08/14/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 3rd Shift - NC

Description:
Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices.

Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.

Performs line clearances after each lot to ensure all materials from the previous lot have been removed.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.
In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:
We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend.

They would need to have prior Aircraft Inspection experience and preferably have composite experience also.
 
Job Number: FD-519656NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 06/21/2017
Last Updated: 08/14/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Systems Specialist (Level 3)

Description:
Quality Systems Specialist 3
Location: New Orleans, LA
Duration: 12+ months

Job Description:
Reviews proposals, contracts, regulatory, program and customer requirements ensuring early quality involvement in program development. Prepares and maintains Quality directives, policies, processes, procedures and metrics to assure program, contract, customer, regulatory requirements, international standards and working agreements are deployed. Analyzes process data, metrics, models and flows to identify root cause of problems. Participates with stakeholders to develop potential preventive or corrective actions and implementation. Conducts research, compiles and analyzes performance reports and process control statistics, to continuously improve process capability. Conducts quality source selection and process reviews of suppliers'' ability to meet program quality requirements and support business decisions, and develops a coordinated response for management review and approval. Conducts hardware, software and system level audits to determine compliance with quality management system standards, configuration assurance, related business, regulatory and customer requirements and reports results to management. Analyzes data to provide material review dispositions for nonconforming materials, parts and equipment. Works under general direction.

This position is with the client Exploration Launch Systems supporting production of the NASA SLS Core Stage and is based at the NASA Michoud Assembly Facility in New Orleans, Louisiana.
 
Job Number: 17-11964
Job Location: New Orleans, LA
Per Diem: Yes
Duration: 12 months
Start Date: Asap
Input Date: 07/07/2017
Last Updated: 08/09/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Systems Specialist 3

Description:
Quality Systems Specialist 3
 
Location: New Orleans, LA
Duration: 12 months
 
Job Description:
Reviews proposals, contracts, regulatory, program and customer requirements ensuring early quality involvement in program development. Prepares and maintains Quality directives, policies, processes, procedures and metrics to assure program, contract, customer, regulatory requirements, international standards and working agreements are deployed. Analyzes process data, metrics, models and flows to identify root cause of problems. Participates with stakeholders to develop potential preventive or corrective actions and implementation. Conducts research, compiles and analyzes performance reports and process control statistics, to continuously improve process capability. Conducts quality source selection and process reviews of suppliers'' ability to meet program quality requirements and support business decisions, and develops a coordinated response for management review and approval. Conducts hardware, software and system level audits to determine compliance with quality management system standards, configuration assurance, related business, regulatory and customer requirements and reports results to management. Analyzes data to provide material review dispositions for nonconforming materials, parts and equipment. Works under general direction.
 
This position is with the client Exploration Launch Systems supporting production of the NASA SLS Core Stage and is based at the NASA Michoud Assembly Facility in New Orleans, Louisiana.
 
Education / Experience:
Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.
 
Report to work instructions after obtaining badge:
Management to meet and greet at Michoud Assembly Facility in lobby
 
 
Job Number: 17-11964
Job Location: New Orleans, LA
Per Diem: Split
Overtime: possible
Duration: 12 months
Start Date: 7/21/17
Input Date: 07/06/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Security Architect (Cyber Threat Intelligence Analyst) Lvl 3 - KS

Description:
Occupation Description:
Information Technology consists of job families that develop, deploy, and maintain the information technology environment. It includes jobs applicable to application development and maintenance computing systems architecture, delivery systems/computing infrastructure, data management, networking and communications, mathematics and modeling, and advanced technology.


Job Family Description:
Designs, tests, and implements state-of-the-art security software and hardware (e.g., network and application firewalls, intrusion prevention systems, secure file transfer, web proxy, identity management systems, PKI, VPN,etc.) Assist with design, test and implementation of secure operating systems, networks, and database products using knowledge of information systems security concepts, theory, applications (e.g., secure architectures, secure electronic data communications, network security, protection of sensitive data, etc.), and information systems technology (e.g., computing platforms, systems integration, analysis, architecture, etc.). Applies knowledge of technical, analytical, project management, and negotiating skills to ensure the confidentiality, integrity, and availability of all information system assets and to ensure compliance with company policies, procedures, contractual, and regulatory requirements. Develops incident response policies, procedures and analysis using knowledge of security operations concepts. Conducts risk assessments and provides recommendations for system and application design. Uses encryption technology, penetration and vulnerability analysis of various security technologies, and information technology security research. Manages relations with security vendors works closely with commercial computer product vendors and other information systems organizations to resolve relevant security issues.

Requirements:
Level 3
Ed / Exper
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.
Must be a US born citizen
Duration: 3-12 month project
1st shift
SKILLS NEEDED:
Must have CISSP, CISM, CISA, CCSP, SANS, GIAC or comparable certification

Incident response plan

Read Security logs

ADDITIONAL SKILLS AND QUALIFICATIONS:

Broad experience in general security controls such as end point security, cryptography, PKI, directory services, IPSec, etc.

Knowledge in Incident Management best practices

Knowledge with the Software Development Life Cycle

Experience with security technologies and methods as they apply in a business environment

Qualifications:

Major certification such as: CISSP, CISM, CISA, CCSP, SANS, GIAC or comparable certification

Certified Ethical Hacker certification preferred

Experience working with IP based networking protocols, firewalls, IPS/IDS, SEIM, general application and database security, and operating system internals and security control mechanisms

Broad experience in information technologies, such as programming languages, computer hardware, testing methodologies, databases, and system design

Experience in cyber security with the ability to assess current vulnerabilities and threats and the development of controls, remediation & countermeasures

Experience in performing network vulnerability scanning, penetration testing, security event log collection, cyber threat analysis, and reporting

Experience in managing security risks related to third parties and vendors

Knowledge of commonly accepted industry standards and best practices relating to security, including ISO 27002/27005, ITIL, CMM, NIST publications and other best practices

Past experience designing, building and integrating security technologies such as Security Event Management, encryption products, data protection or data leakage, GRC tools, identity management, VPNs, etc.

Experience hardening operating systems (examples: NT, W2K, LINUX, UNIX)

Experience using Foundstone, Nessus, FireEye, Metasploit, WireShark, or Nmap
 
Job Number: FD-518193KS
Job Location: Wichita, KS
Rate: $ BOE/HR
Per Diem: Yes Possible
Overtime: Possible, no guarantee
Duration: 3-11 Months depending on need
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Security Architect - Computing Security Specialist (KS)

Description:
Occupation Description:
Information Technology consists of job families that develop, deploy, and maintain the information technology environment. It includes jobs applicable to application development and maintenance computing systems architecture, delivery systems/computing infrastructure, data management, networking and communications, mathematics and modeling, and advanced technology.


Job Family Description:
Designs, tests, and implements state-of-the-art security software and hardware (e.g., network and application firewalls, intrusion prevention systems, secure file transfer, web proxy, identity management systems, PKI, VPN,etc.) Assist with design, test and implementation of secure operating systems, networks, and database products using knowledge of information systems security concepts, theory, applications (e.g., secure architectures, secure electronic data communications, network security, protection of sensitive data, etc.), and information systems technology (e.g., computing platforms, systems integration, analysis, architecture, etc.). Applies knowledge of technical, analytical, project management, and negotiating skills to ensure the confidentiality, integrity, and availability of all information system assets and to ensure compliance with company policies, procedures, contractual, and regulatory requirements. Develops incident response policies, procedures and analysis using knowledge of security operations concepts. Conducts risk assessments and provides recommendations for system and application design. Uses encryption technology, penetration and vulnerability analysis of various security technologies, and information technology security research. Manages relations with security vendors works closely with commercial computer product vendors and other information systems organizations to resolve relevant security issues.

Requirements:
Level 3
Ed / Exper
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.
Must be a US born citizen
Duration: 3-12 month project
1st shift
SKILLS NEEDED:
Manage McAfee EPO

PaloAlto Firewalls

Whitelisting (URL filtering)

Account Management (account tickets – onboard/offboard accesses)

IPS (internet protection services)

WAF (web access firewalls)

ADDITIONAL SKILLS AND QUALIFICATIONS:

Experience in the securing, development, implementation and maintenance of large-scale systems across multiple platforms.
Experience with security technologies and methods as they apply in a business environment.
Broad experience in general security controls such as end point security, cryptography, PKI, directory services, IPSec, etc.

Qualifications
Major certification such as: CISSP, CISM, CISA, CCSP, SANS, GIAC, or comparable certification
Experience working with IP based networking protocols, firewalls, IPS/IDS, SEIM, general application and database security, and operating system internals and security control mechanism
Broad experience in information technologies, such as programming languages, computer hardware, testing methodologies, databases, and system design
Experience in managing security risks related to third parties and vendors
Knowledge of commonly accepted industry standards and best practices relating to security, including ISO 27002/27005, ITIL, CMM, NIST publications and other best practices
experience or knowledge of Foundstone, Nessus, FireEye, Metasploit, WireShark, or Nmap
 
Job Number: FD-517973KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: Yes Possible
Overtime: Possible, no guarantee
Duration: 3-11 Months depending on need
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Product Engineers - East Aurora, NY

Description:
STS AeroStaff Services is currently hiring Senior Product Engineers for open positions in East Aurora, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Function:

• This is a special assignment in support of a lean initiative in the Space and Defense group
• Working under the general direction of the Contamination Engineering Section head, work as a team member with other Sr. Product Engineering technicians, to populate an electronic database of cleaning and packaging instructions
• Interface with Methods and Product Engineering functions to ensure process directions are correctly identified on various operator work instructions

Qualifications:

• A Bachelors’ degree in computer science or software engineering or electrical engineering or equivalent experience is required; the equivalent of a two year Associate Engineering Certificate a plus
• Must have a minimum of three (3) years’ Production of Prototype Test Technician experience
• Experience in a methods engineering role is a plus
• The incumbent should have proven ability to interpret drawing notes for special processes, finishes, edge breaks, materials
• Ability to interpret manufacturing process steps to create the proper cleaning and packaging requirements
• Familiarity with precision components cleaned and packaged for assembly and testing in an ISO class 7 cleanroom atmosphere

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39252
Job Location: East Aurora, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Control

Description:
Essential Duties and Responsibilities (including, but not limited to the following):
Mentor Quality Control team members.
Train new team members within the Quality Control department
Identify work efficiency and process improvement and work them out with his/her manager
Assit to intent/Solutions Scope meetings
Establish and improve Quality Control for Testing processes by developing and executing test cases, scripts, plans and procedures on day to day basis.
QA testing new tools to be released within the Solutions Operations department.
Document testing procedures and tools.
Troubleshooting any testing issues through black box testing methodology.
Collaborate with Solutions Developers and Engineering on test strategies and plans, communicating and tracking bugs/open items.
Responsible for 100% accuracy and top quality before our solutions, programs and outreaches go into production.
Also implement solution, program and outreach tests, which include phone channel testing for branching logic, prompt accuracy and quality through call simulation using our tools and business rules, as well as proper rendering and content for Email, SMS, Live Agent and Web Survey outreaches, ensuring the correct program rules are in place based on the intent of the solution and/or program.
IVR, Email, SMS, Live Caller and WebSurvey content proofing to ensure the logic and all dynamic fields and values are synchronized and stated properly on specification documents at the time of content completion and approval.
IVR, Email, SMS, Live Caller and WebSurvey content proofing to ensure the logic and all dynamic fields and values are synchronized and stated properly on specification documents at the time of content completion and approval.

Qualifications:
Computer Science bachelor degree required.
3 - 5 years of experience in software application testing (manual and automated) where you were responsible for testing functionality, conformance to specifications and user acceptance.
Outstanding oral and written communication skills.
Proficient with Microsoft Office applications and expert with Microsoft Excel.
Demonstrated ability to multi-task with strong organizational skills.
Strong analytical and logical thinking applied with an excellent attention to detail – thinking outside of the box.
Personal characteristics that demonstrate initiative and focus on achievement/results.
Strong communication skills and the ability to excel in a highly collaborative and fast paced team environment.
Ability to retain knowledge learned on the job.
Ability to work under pressure and meet tight deadlines.
Previous experience in a similar position is a plus.
Healthcare industry exposure is a plus.
Salesforce experience is a plus.
Cloud testing experience is a plus.
JIRA experience is required
Experience with JavaScript, MySQL and HTML is a plus.
Quality Control Acceptance Test must be taken and must be able to complete one full test cycle.
 
Job Number: 3280
Job Location: Danvers, MA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 5 months
Start Date: August 1st
Input Date: 07/12/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Dev Analyst - Level 2 / no clearance / virtual / Sharepoint HTML5 Javascript CSS .NET

Description:
159753
Requirement# EBS-REQ-0810
Work location ORLANDO, FL
Work Week 9/80-A Priority
Needed Date 07/03/2017
End Date 12/01/2017
Number of Resources 1
Security Clearance No clearance


Type of Service: Information Technology
Title: Software Dev Analyst - Level 2

Description
THIS POSITION CAN BE VIRTUAL ANYWHERE IN THE US, as long as there is demonstrated work ethic that shows candidate can perform duties in a virtual / telecommuting environment. References may be requested. Software engineer specializing in SharePoint development. Must be fluent in client-side technologies such as HTML5, JavaScript, CSS, AngularJS, Angular, jQuery, and Bootstrap to develop innovative solutions / applications for customers within SharePoint 2010 and 2013. Must have a working knowledge of SharePoint .NET development. Must be able to develop SharePoint Hosted and Provider Hosted add-ins in the SP 2013 environment. Developer should also be able to re-write applications from a server-side to a client-side model to better align with new SharePoint patterns and practices. Would like to create forms using client-side code instead of using Microsoft InfoPath, as well as convert existing InfoPath forms to client-side code to use within SharePoint 2010 / 2013. Knowledge of out of the box SharePoint Designer workflows is a must, and familiarity/use of SharePoint 2013 workflows is a plus.
Skill/Experience/Education
Mandatory:

HTML JavaScript CSS jQuery AngularJS Bootstrap Foundation SharePoint 2010 full-trust solution development using .NET SharePoint 2013 SP Hosted & Provider-Hosted add-in development SharePoint Designer 2010 / 2013
Desired:

Angular UI Grid DataTables jQuery UI AngularUI Angular Material WordPress My SQL DB PHP Apache Telerik InfoPath Cloud Development Moment.js Toaster

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

angularJS Client-side coding 0-3 Years Yes
jquery client-side coding 0-3 Years Yes
bootstrap client-side coding 0-3 Years No
SharePoint .NET server-side development 0-3 Years Yes
SharePoint Designer SP development - workflows 0-3 Years Yes
InfoPath conversion from InfoPath 0-3 Years No
Telerik conversion from Telerik 0-3 Years No
PHP sw development 0-3 Years No
WordPress sw development 0-3 Years No
Apache sw development 0-3 Years No
My SQL DB sw development 0-3 Years No
Cloud Development sw development 0-3 Years No


Certification Microsoft SharePoint No No

Interview Required Yes
Min Pay Rate 30.00 USD
Max Pay Rate 50.00 US

Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-0810
Job Location: Orlando, FL
Rate: 30-50/hr max
Duration: 6 month contract
Input Date: 07/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 04/17/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Development Analyst - Level 2

Description:
Software Development Analyst - Level 2

Location: Orlando, FL – Virtual/Remote/Telecommuting okay
Pay Rate: DOE ($30/hr - $50/hr)
Duration: 5 month contract
Shift: First, 9/80, no OT
** MUST be a U.S. CITIZEN **
** THIS POSITION CAN BE VIRTUAL ANYWHERE IN THE US, as long as there is demonstrated work ethic that shows candidate can perform duties in a virtual / telecommuting environment **
** References may be requested **

Description
-Software engineer specializing in SharePoint development.
-Must be fluent in client-side technologies such as HTML5, JavaScript, CSS, AngularJS, Angular, jQuery, and Bootstrap to develop innovative solutions/applications for customers w/in SharePoint 2010 & 2013.
-Must have a working knowledge of SharePoint .NET development.
-Must be able to develop SharePoint Hosted and Provider Hosted add-ins in the SP 2013 environment.
-Developer should also be able to re-write applications from a server-side to a client-side model to better align with new SharePoint patterns and practices.
-Would like to create forms using client-side code instead of using Microsoft InfoPath, as well as convert existing InfoPath forms to client-side code to use within SharePoint 2010 / 2013.
-Knowledge of out of the box SharePoint Designer workflows is a must, and familiarity/use of SharePoint 2013 workflows is a plus.

Skill/Experience/Education (MANDATORY):

-jQuery: client-side coding (0-3 years’ experience required)
-AngularJS: client-side coding (0-3 years’ experience required)
-Bootstrap client-side coding (0-3 years’ experience)
-SharePoint 2010 full-trust solution development using .NET
-SharePoint .NET: server-side development (0-3 years’ experience required)
-SharePoint Designer 2010 / 2013: SP development – workflows (0-3 years’ experience required)
-HTML
-JavaScript
-CSS
-SharePoint 2010/2013
-SP Hosted & Provider-Hosted add-in development
-Foundation

Desired:

-WordPress: S/W development (0-3 years’ experience)
-MySQL DB: S/W development (0-3 years’ experience)
-PHP: S/W development (0-3 years’ experience)
-Apache: S/W development (0-3 years’ experience)
-Telerik: conversion from Telerik (0-3 years’ experience)
-InfoPath: conversion from InfoPath (0-3 years’ experience)
-Cloud Development: S/W development (0-3 years’ experience)
-Angular UI
-Grid
-DataTables
-jQuery UI
-Angular Material
-Moment.js
-Toaster
-MS SharePoint Certification
 
Job Number: 7581
Job Location: Orlando, FL
Rate: 30-50
Per Diem: Split Possible
Overtime: No
Duration: 5 mos
Start Date: ASAP
Input Date: 07/27/2017
Last Updated: 09/05/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Must Be a US Citizen

GNC-P (propulsion) SW engineers

Rational Rhapsody and significant experience with real-time embedded systems required
 
Job Number: 40252
Job Location: TX & CO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 12/07/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - (ARM BSP Developer) - 6955534

Description:
Participate as a member of a Board Support Package (BSP) development / Software Diagnostics team supporting custom hardware for real-time embedded missile applications. Design, create, and maintain multiple BSPs – on reference and tactical Circuit Card Assemblies (CCAs). Tasks include writing modifications of baseline code to support custom hardware, designing new features for application software, integration and configuration of real-time OS (RTOS) on hardware, JTAG In-Circuit Emulator (ICE) configuration and debugging, and performing bring-up and trouble-shoot of CCA hardware with hardware engineers. The candidate must be an independent problem solver and comfortable integrating on an embedded target board. The ideal candidate will have experience working with Wind River Systems Workbench IDE, VxWorks RTOS, and be familiar with ARM v7/8 processor architectures generally, and the Xilinx Zynq, Zynq UltraScale+, and TI Keystone II devices in particular (ARM Cortex-A9, A53, A15, respectively).

Successful candidate applies technical expertise in the development of C/C++, and Assembly software for embedded multi-processor systems. Develops complete software solutions, and influences the successful completion of supported programs and projects. Produces documentation related to the design and release of software artifacts. Understands and utilizes agile software development methods, automation, and continuous integration. Displays initiative and can work well alone or as a member of a team. Follows program / project processes and procedures. Interacts with senior software personnel through both written and verbal communication.

Required Skills/Experience:
• At least 5 years of experience with hard real-time, embedded systems development
• Recent development experience with Workbench IDE v3.x, and VxWorks v6.9 or later (VxWorks 7 is preferred)
• Software board bring-up experience – including use of JTAG In-Circuit Emulators and associated debugger tools
• Experience designing multiprocessor systems using PCIe bus
• Experience with hardware/software integration for real time embedded software, working with electronics and FPGA configurable logic developers
• Custom boot code, boot loader, and low-level driver development experience
• Development experience with ARM Cortex A processors (Cortex-A9, A15, A53 preferred)
• Excellent C/C++ and Intel assembly language skills
• Experience with all phases of software development including requirements analysis, implementation, unit test, and integration
• Experience with modern Software Configuration Management tools
• Bachelor’s or Master’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field

Desired Skill/Experience:
• Excellent written and verbal communication skills
• Experience with VxWorks 6.x / 7.x (VxBus) device driver development, integrating software with custom FPGA configurable logic
• Embedded platform virtualization (experience with Wind River’s VxWorks Hypervisor technology would be a plus)
• Experience with Agile/Scrum software development
• Experience and knowledge of Linux and Windows computing environments
• Understanding of embedded systems architecture and computer hardware / software optimization techniques
• Parallel programming principles and processes for technical computing environments
• Experience with computer in the loop, hardware in the loop and closed loop simulation
 
Job Number: 6955534
Job Location: Tucson, AZ
Duration: 9-12 Months
Input Date: 07/31/2017
Last Updated: 08/14/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / no clearance / ASP.NET with C#, ASP, JavaScript, Html and CSS is required / Web Developer URGENT URGENT UT

Description:
159893
Requirement# AERO-REQ-0611
Work location Odgen, UT
Work Week 9/80-A
Priority High
Needed Date 08/01/2017
End Date 10/31/2018
Number of Resources 1
Security Clearance No Clearance


Software Engineer
Description
Software engineer will be located at Hill AFB, Utah with responsibility to develop, maintain and support software tools and websites for the Air Force, Army, and Navy. Tools include, but are not limited to, the F-16 Organic Change Management (OCM) system, Automated Weight and Balance System (AWBS) download website, and client-side Weight and Balance software. OCM is a web system used to automate processes and provide configuration management support for the F-16. AWBS is a common tool throughout the Department of Defense. It tracks aircraft weight and center-of-gravity in order to provide information and generate flight clearance forms. Process automation is exciting and challenging because of the ability to streamline processes and the opportunity to leverage the latest technologies to simplify each task. As technologies develop, they are evaluated and employed by the software team to keep our tools on the leading edge of technology. Involvement in all phases of software development is required, i.e., development of software requirements and design documents, project plans, software coding, software testing, and training customers on the use of the product.

Skill/Experience/Education

Mandatory:

In-depth knowledge and experience in web development, specifically using ASP.NET with C#, ASP, JavaScript, Html and CSS is required. Skilled with Microsoft Visual Studio and C# development. Strong organization, written, oral, and presentation skills required.

Desired:

Proficient in using Microsoft Visual Studio and Microsoft SQL Server.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Web Developer Web Developer utilizing ASP.NET with C# 6-8 Years Yes
ASP.NET with C# 4-5 Years Yes
Microsoft Visual Studio 4-5 Years Yes

Interview Required Yes

Shift 1st Shift
OT Allowed No
Travel Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0611
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 15 month contract
Input Date: 08/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II/III - (OK) - ACTIVE SECRET

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START

The successful candidate develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Performs software project management and software supplier management functions. Develops, selects, tailors and deploys software processes, tools and metrics. Executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards. Works under general direction. Knowledge of Red Hat Linux, Windows Server and operating system hardening, desired.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: SWOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 7+ Months
Start Date: ASAP
Input Date: 04/25/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III (10 OPENINGS) - (MO)

Description:
ACTIVE INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/03/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III - (MO)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

F-15 Mission Systems needs experienced software engineers to assist with the development of real-time embedded Mission Computer OFP software. Candidates should have extensive experience in real-time embedded Avionics software development and engineering. This should include requirements analysis, software architecture and design, software implementation, integration, automated test procedure development, lab / flight testing, and problem diagnosis / resolution. Applicants should have experience with modern computer programming techniques and a preference for an Agile software development process. Programming language experience in Ada, C, C++, and Python is needed. Additionally, the position requires the use of COTS software tools ClearCase, ClearQuest, and DOORs. Works under general direction.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: swMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/03/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III - (MO) - INTERIM SECRET

Description:
INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Aircraft Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWIIIMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/17/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
AERO REQ 0392 158396
Software Engineer-N
Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements.
Skill/Experience/Education
Mandatory:


Current SECRET clearance
MATLAB/Simulink;. Significant Flight Controls and Flight Simulation experience. Complex organization and documentation skills are required Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
 
Job Number: JE-0392
Job Location: Palmdale, CA
Rate: 65-70/hr
Duration: 12 month contract
Input Date: 07/05/2017
Last Updated: 07/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
Lockheed Martin Aero 0406
Recruiter to Contact: Jeana Edrozo
Job Title: Software Engineer - N
Job Number: 159142
Location: Palmdale, CA
Compensation: 65-70/hr
Assignment Length: Palmdale, CA
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
Non Exempt

Description:


The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development.

The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP).

The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software.

Applicant must be able to support the full software development life cycle

– including requirements and configuration management

- and work in a mature software process environment.

The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test.

Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects.

This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development.

Applicant must have excellent oral and written communication skills.

The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.

Skill/Experience/Education
Mandatory:

Experience programming in C++; Experience with Sensors and/or Datalinks

Desired:

Scripting languages and GUI development ;Distributed Interactive Simulation (DIS) standards;

TS/SCI and/or DoD Top Secret Preferred;

RF Comms; Network programming ;

OpenGL/DirectX
 
Job Number: JE-0406
Job Location: Palmdale, CA
Rate: 60-70/hr DOE
Duration: 12 month contract
Input Date: 07/05/2017
Last Updated: 07/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
AERO REQ 0390 158300
Title: Software Engineer-N
Work Location: Palmdale, CA
Start Date: 02/13/2017


Job Description:
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance.


Mandatory Skills:
Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance.


Desired Skills:
Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
 
Job Number: JE-0390
Job Location: Palmdale, CA
Rate: 65-70/hr max
Duration: 12 month contract
Input Date: 06/23/2017
Last Updated: 07/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret UT

Description:
159707
Requirement# AERO-REQ-0495
Work location Odgen, UT
Work Week 9/80
Priority High
Needed Date 04/10/2017
End Date 04/27/2018
Number of Resources 1
Security Clearance Secret
52-60/hr DOE


Title: Software Engineer

Description
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating Vehicle Management Systems software.


Mandatory:

Engineering knowledge of C++ application programming, basic wire testing methods, wiring diagram familiarity, Technical Order usage, and process/methodology adherence; Interface with customer personnel is required. Also performs technical planning, research, system integration, verification and validation, documentation, and fielding of program update candidates.
Desired:

Provide engineering expertise to support the development and updates to a piece of Air Force support Equipment. The Multiplex Bus Fault Isolator (MBFI) is support equipment which provides capabilities to trouble shoot and detect faults within the multiplex busses of aircraft. A thorough knowledge of aircraft Multiplex bus communication and 1553/194 standards ; Must work well in Integrated Product Team (IPT) comprised of contract labor, Lockheed Martin, and government civil servants

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

Borland C Builder and C++ Programming Software Coding Languag 0-3 Years
Microsoft Access Programming Programming 0-3 Years
Math and Logic Skills Skills 0-3 Years
Technical Writing Technical Writing 0-3 Years



Interview Required Yes
Shift 1st Shift
Max Bill Rate OT Allowed No
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0495
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 12 month contract
Input Date: 02/23/2018
Last Updated: 02/28/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Duration: 6 month contract

** Candidates must have an Active Secret clearance or have had a Secret clearance in the last two years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have primarily Hardware experience **

- Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
- Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
- Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
- Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).

Education:
- Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
- Advanced degree desirable.
- Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: 7489
Job Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 06/02/2017
Last Updated: 08/10/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV with active secret / this is a hardware role FL URGENT

Description:
Job Title: Specialist Systems Engineer IV
Job Number: 159587/7218795
Location: Jupiter, FL
68/hr max
6 months
Active Secret to start

Need candidates with Hardware experience. The manager said he is seeing candidates who primarily have software and electrical experience instead of Hardware experience.

Remaining Positions: 2

Duties:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Candidates must have primarily Hardware experience **

Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
Represents the organization in conferences to resolve important questions and to plan and coordinate work.
May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
Develops solutions to complex problems which require the use of ingenuity and creativity.
Work is reviewed at extended intervals for desired results and achievement.
Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.


-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates

requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

-10% - Communicates results in oral presentations and written communication.

Skills:
Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).
Education:
Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
Advanced degree desirable.
Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: MB-7218795
Job Location: Jupiter, FL
Rate: 68/hr max
Duration: 6 month contract
Input Date: 07/25/2017
Last Updated: 08/04/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specification Writing Analyst

Description:
Specification Writing Analyst

Location: Canoga Park, CA
Rate: $30.00 - $35.00/HR
Duration: 3+ month contract
Shift: 1st Shift

Duties:
**NOTE: The duration of this assignment has the possibility of being longer than 3 months. This is a backfill and this role will be extended, possibly up to 2 years **

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **
** In-person interviews are required. Candidates should be local or able to attend an in-person interview at their own expense. **

** Candidates must have Aerospace Specifications Writing experience. **
- Under general supervision and following established policies, ensures that technical documents are complete, accurate and adhere to military, customer, contract flow down, and company requirements in both form and content.
- Review documentation for general layout, format, style and organization as well as writing, graphics and critiquing.
- Work with the Integrated Product Teams to plan, write, and edit technical specifications/standards, reports, proposals, etc. for print and electronic publication.
- Responsible for determining the format required based on contractual requirements and Military Standards.
- Translate technical input into well-written, precise technical documents.
- Assists Configuration Management and others with technical reports, manuals, and presentations.

Skills:
Required:
- Knowledge of Mil-Standards for the preparation of specifications.
- Interpersonal skills necessary to interface effectively with all levels of personnel.
- Strong background in English grammar and composition.
- Ability to operate effectively in a team environment.
- Required knowledge of various computer systems and applicable software documents (Word, Excel, PowerPoint, Adobe Writer, etc.) to prepare reports and documents.

Desired:
- Windchill PLM, Visio and DOORS experience a plus.
- Understanding of copyright, export control (ITAR) and intellectual property policies.
- Ability to read drawings and view CAD models helpful.

Education:
- A Bachelor's degree in an appropriate discipline and three (3) years of experience in a directly related field, or an equivalent combination of education and experience.
 
Job Number: 7592
Job Location: Canoga Park, CA
Rate: $30.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Input Date: 07/07/2017
Last Updated: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specification Writing Analyst CA

Description:
7405471
Job Title: Specification Writing Analyst
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
**NOTE: This is a backfill and this role will be extended, possibly up to 2 years **



** Candidates must be U.S. Citizens **



** Permanent residents are NOT eligible for this role **



** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **





** Candidates must have Aerospace Specifications Writing experience. **



** In-person interviews are required. Candidates should be local or able to attend an in-person interview at their own expense. **



Under general supervision and following established policies, ensures that technical documents are complete, accurate and adhere to military, customer, contract flow down, and Aerojet Rocketdyne requirements in both form and content.
Review documentation for general layout, format, style and organization as well as writing, graphics and critiquing.
Work with the Integrated Product Teams to plan, write, and edit technical specifications/standards, reports, proposals, etc. for print and electronic publication.
Responsible for determining the format required based on contractual requirements and Military Standards.
Translate technical input into well-written, precise technical documents.
Assists Configuration Management and others with technical reports, manuals, and presentations.
Skills:
Required:

Knowledge of Mil-Standards for the preparation of specifications.
Interpersonal skills necessary to interface effectively with all levels of personnel.
Strong background in English grammar and composition.
Ability to operate effectively in a team environment.
Required knowledge of various computer systems and applicable software documents (Word, Excel, PowerPoint, Adobe Writer, etc.) to prepare reports and documents.
Desired:

Windchill PLM, Visio and DOORS experience a plus.
Understanding of copyright, export control (ITAR) and intellectual property policies.
Ability to read drawings and view CAD models helpful.






Education:
A Bachelor's degree in an appropriate discipline and three (3) years of experience in a directly related field, or an equivalent combination of education and experience.

Languages:
English Read Write Speak

DOCUMENTATION/TECHNICAL WRITING
MIL-STDS


State/Province: California
City/Town: Canoga Park
 
Job Number: MB-7405471
Job Location: Canoga Park, CA
Rate: 35/hr max
Duration: up to 2 years
Input Date: 07/06/2017
Last Updated: 07/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer I - 6963364

Description:
Software Signal Processing Engineer- Radar, Unix, C++

These positions are for Software Signal Processing Engineers within the Integrated Defense Systems, Electrical Design Directorate, Receiver Exciter and Signal Processing Department. The Receiver, Exciter and Signal Processing Department designs, developer, and integrates a number of different products and technologies relative to radar systems. The Signal Process Technology group within the Receiver, Exciter, and Signal Processing Department focus on state-of-the-art processing technologies and distributed high performance computing architectures that are used to build next-generation Radar Signal Processing applications.

The Software Signal Processing Engineer position is located in Marlboro, Massachusetts, however you may also be able to work in the Tewksbury/ Woburn area. Responsibilities include working within Linux, Unix and Real Time Operating System developing C/C++ implementation of signal processing algorithms and time critical control functions involved in and direct control of sensor systems. This position will also include working closely with Software Architects and Principal Systems, Hardware, and Software engineers to interpret requirements and correctly implement these requirements in software.

Senior Software Engineer (CE39/E03) or Senior Software Engineer (CE40/E04) - Software Signal Processing

Required Skills:
•Minimum of 4 years or relevant experience
•Multithreaded application development experience that includes testing and debugging in C++/C on Linux or Unix environments
•Experience in developing and optimizing algorithms for performance.
•Ability to translate system performance and operation specifications into software requirements, design, and test specifications
Bachelor's degree in an engineering or scientific discipline. Advance degree

Desired Skills: •Direct experience implementing complex signal processing algorithms in C++ meeting latency and throughput performance requirements or experience in implementing complex control operations in software with defined performance timelines •Working understanding of parallelism and concurrency as applied to algorithm implementation on shared memory and distributed systems •Experience in multithreaded, multiprocessor software development using pthreads, OpenMP, or MPI programming models on clustered deployments •Experience developing applications for GPGPU and/or Intel Xeon Phi processors •Familiar with software configuration management and development process control (i.e. CMMI) •Experience in using version control tools such as ClearCase •Continuous integration and test experience in a hardware/software laboratory environment •Strong communication skills •Ability to work independently and in a team •High degree of creativity and ability to solve a wide range of difficult problems
 
Job Number: 6963364
Job Location: Marlbourough, MA
Rate: OPEN
Input Date: 06/22/2017
Last Updated: 07/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Calibration Technician Lvl 3(physical/Dimensional) in Stennis Space Center, MS & Littleton, CO locations #144993AS

Description:
Recruiter to Contact: Adam Salazar
Job title: Calibration Technician
Job Number: 159547
Location: Littleton, Co
Compensation: DOE
Assignment Length: long term contract
10 Positions Available(please spread the word)

Description:

Calibrate electronic and physical mechanical test and measuring equipment. Calibration to include Commercial and Government Owned equipment with the areas of calibration being determined by equipment backlog Set up calibration stations according to detailed specifications, blue prints, drawings and requirements.

Performs calibration/certifications/verifications of Electronic, Physical and Mechanical test and Measurement Equipment. Duties to include verifications of equipment accuracies by comparison to known standards. Adjustment to the equipment as necessary to meet industry standards for accuracy and customer requirements. Recording and documenting calibration information within a controlled database. Candidate must be able to follow documented processes to perform a combination of manual and automated calibrations utilizing automation software such as Fluke MetCal and Measurements International Software in accordance to calibration procedures and within the Stennis quality system. Candidate must have knowledge of proper adjustment procedures for test and measurement equipment and repair techniques. Candidate must be able to work independently with little assistance.

Required Minimums

Level 2

High School diploma or equivalent experience / combined education with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3 to 7 years of experience. Required Supervision: General supervision with instructions given for routine work and detailed instruction for new lines of work or special assignments

Level 3

A.S. degree in a technical field or ASQ Calibration technician certification or PMEL training and 5-10 years of experience. Knowledgeable in the use of calibration automation stations and in M&TE troubleshooting and repair methods and techniques

Desired Skills

Basic electronic and Physical Dimensional calibration Experience. Electronic RF Microwave, Physical Dimensional, Flow Calibration experience. Must demonstrate good communications skills, verbal and written as well as solid organization skills.

Security Clearance: None (but ability to obtain a clearance if needed)
 
Job Number: 144993AS
Job Location: Littleton, CO
Rate: Open, DOE
Per Diem: N/A
Duration: 12+ months
Start Date: ASAP
Input Date: 06/01/2017
Last Updated: 07/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/31/2017
Last Updated: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051178
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydM4AAI&URLSource=cjhunter