Job Search Results

343 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/03/05 Friday 08:48PM Pacific Time by ContractJobHunter. )

Listings 1 - 343

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Technician (Rotorcraft), Fort Worth, TX - JR-019786

Description:
Aerospace Engineering Technician (Rotorcraft), Fort Worth, TX
JR-019786

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

You Will:

• Report to onsite Engineering Manager
• Act as Engineering technician / mechanical engineering mechanic with experience in test machinery, drive systems and gear boxes.
• Accountable for construction, assembly, installation, checkout and operation of various test machines and fixtures per Engineering Laboratory Operating Procedures and Engineering Instructions.

• Additional functions include the performance of acceptance tests, assembly and disassembly of Drive System components, preparing laboratory test procedures and maintenance of equipment.
• Responsible for building and testing of aircraft components, fixtures and tooling required to conduct tests.

• Interact with test engineers, laboratory technicians and test support groups.
• Requires record keeping, documentation and helicopter component assembly/installation.
• Interact with personnel in other laboratories.
• Interact with Manufacturing, Transportation, Maintenance, Quality, Dispatching, Tooling and various other departments.

You Will Need:

• Read and understand mechanical drawings, reports, specifications and engineering instructions in order to make, assemble, build, operate and repair test machines, (aircraft gear boxes, drive systems etc Preferred)

• Able to lift 50 pounds.
• This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR).

Education: Associate Degree in Engineering (Mechanical) (Preferred)
High School Diploma with Five years’ experience
Years of Experience: 5 yrs Required.

Industry: Aerospace (Aircraft A&P license) Equivalent military certification / Mechanical , USAF,

Citizenship: US Citizen
Skills & Experience
Aircraft Maintenance, Drive Systems, Mechanical Maintenance, Mechanical Repairs, Mechanical Testing
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Engineering-Technician_JR-019000
 
Job Number: JR-019786
Job Location: Fort Worth, TX
Input Date: 01/15/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Technician, Fort Worth, TX - JR-019361

Description:
Engineering Technician, JR-019361
Fort Worth, TX

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Engineering Technician Tasks Include:
• Accountable for construction, assembly, installation, checkout and operation of different test machines and fixtures per Engineering Laboratory Operating Procedures and Engineering Instructions.
• Build and test aircraft components, fixtures and tooling required to conduct tests.
• Work with test engineers, laboratory technicians and test support groups. Additional functions include the performance of acceptance tests, assembly and disassembly of Drive System components, preparing laboratory test procedures and maintenance of equipment.
• Requires record keeping, documentation and helicopter component assembly/installation.
• Work with personnel in other laboratories.
• Work with Manufacturing, Transportation, Maintenance, Quality, Dispatching, Tooling and different other departments.
• Ensure safe operations and testing of structural assemblies and parts
• You'll Need: Read and understand mechanical drawings, reports, specifications and engineering instructions to make, assemble, build, operate and repair test machines.
• Familiar with MS Office – Word, Excel, and Power Point and computer knowledge
• Able to lift 50 pounds.
Position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). Must be U.S. persons within the meaning of ITAR.
Years of Experience: 3+ yrs minimum Required
Education: Associate Degree in Engineering (Mechanical) - Preferred
Industry: Aerospace (Aircraft A&P license) Mechanical, Military services
Citizenship: US National (Citizen)

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019361
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Description:
Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Cyient takes pride in partnering with the world's leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver many end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Responsibilities:
• Conduct complex fatigue and damage tolerance analysis for metallic components of helicopter rotor, airframe and drive system structures and prepare certification reports
• Conduct and document crack growth analysis validation using test results for inclusion in certification reports
• Conduct reviews of analyses prepared by the engineering team to meet the FAA approved Helicopter methodologies for the ODA EFUM to review and approve
• Guide engineers as they learn to conduct the fatigue and damage tolerance analyses for Helicopter certification
• Conduct and document material coupon testing for fatigue and crack growth properties of various metals
• Contribute to the completion of milestones associated with specific projects (completion of analysis and reporting of results and FAA approvals)
• Use engineering methods and tools such as NASGRO, AFGROW, ANSYS, NASTRAN / PATRAN and a balance of classical hand calculations to analyze high performance rotor, drives and airframe structures.

You'll Need:
Skills:
• High level of proficiency in Fatigue and Damage Tolerance
• Experience in Helicopter analysis
• Experience with NASGRO and/or AFGROW
• Have experience in using MS Office Suite (Outlook, Word, Excel, PowerPoint).
• Good oral and written communication skills

Education: BS in Mechanical, Aerospace Engineering, Math or related science degree or MS in Mechanical, Aerospace Engineering, Math or related science degree required. PhD also is considered.

Experience: Aerospace Rotorcraft – fatigue and damage tolerance analysis - 10+ yrs REQUIRED

Citizenship: US Citizen

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018472
Job Location: Fort Worth, TX
Input Date: 01/04/2021
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Lab Technician, Fort Worth, TX

Description:
Aerospace Instrumentation Lab Technician, Fort Worth, TX
JR-018955

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Instrumentation Lab Technician (Aerospace Rotorcraft)

You Will :

• Report to the onsite Engineering Manager
• The Instrumentation Laboratory Technician is responsible for setting up, operation and maintenance of specialized instrumentation data acquisition systems.
• This includes the use of simple electronics equipment including ohmmeter and voltmeter. This includes wiring and soldering connections.
• He/she must possess technical skills for troubleshooting, maintenance and limited repair of low power DC circuits.
• Work on both metallic and Composite parts/ assemblies to fix strain gages and wiring for data collection
• There may be travel requirements for off-site testing which can last up to 8 weeks at a time. Also, candidate should
• Can work second shift if necessary.

You Will Need:
• Ability to solder and build cables, with knowledge of various connector types.
• Very good knowledge of strain gages, fixing them on surfaces such as Composite structures, metallic structures and pipes etc.
• Self-starter with demonstrated ability to work successfully in a team environment with customers and other disciplines
• Proficient to read and understand wiring diagrams for small project assembly
• Able to read and understand mechanical drawings
• Microsoft software suite applications such as Excel, Word, PowerPoint
• Good communication skills – oral and written.
• Physical strength -ability to lift up to 75 lbs , climb and work for extend periods in confined areas

Education: Associate Degree in Electrical / Electronics / Science / Mech. engineering (preferred), High School Diploma (required)

Years of Experience: Industry: Instrumentation / strain gage Installation / aerospace :5+ yrs
Required

Citizenship: US citizen

Skills & Experience
Soldering, Strain Gauging, Wire Harness Fabrication
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.


https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Instrumentation-Lab-Technician_JR-018955
 
Job Number: JR-018955
Job Location: Fort Worth, TX
Input Date: 12/08/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Senior Composites Materials Test Engineer, Fort Worth, TX

Description:
Sr. Non-Metallic Materials Test-Engineer, Fort Worth, TX

JR-019392

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.



You Will:


You will report to the onsite Engineering Manager. You will perform different Test Engineering tasks to support development, production, and use of advanced engineered composite materials on advanced aerospace vehicles for military, commercial, and innovation application.


You Will:


• Demonstrate advanced knowledge of materials, processes and the controlling specifications.
• Have experience in Composite Materials and processes.
• Have experience in bonding techniques, both metallic and composites.
• Demonstrate advanced skills related to drawing review and interpretation using CAD/CAM software
• Demonstrate advanced skills in using computerized drawing management system (ENOVIA)
• Write wide range of technical reports (IOMs, Test Requests, Destructive Test, Bonding Lab and Material Characterization Reports)
• Demonstrate expertise in Composites testing using Testing machine frames such as MTS or Instron.
• Demonstrate experience in Testing & evaluation of properties of composites by testing specimens in Compression, Tension, 3 - point bend testing, Three- and four-point flexure testing, Tensile testing of isotropic and orthotropic non-unidirectional fiber composites, Design Features laminate testing, Tensile testing of unidirectional carbon fiber reinforced composites, Testing laminates for in-plane shear response of polymer matrix composite materials, lap shear strengths of adhesive bonded single-lap-joints and double -lap joints, Testing of honeycomb sandwich constructed panels,
• Design test specimens for features testing, with discussions of design engineers, such as riveted joint specimens, Holed / notched specimens,
• Program machines (hydraulic or electrical Test frames) for software modifications of Test templates / creating new templates / new test processes. Keeping the OEM software updates and ensuring the upload’s performance. Statistical methods and materials
• Calibration of test machines / and troubleshooting /
• Well versed with test methods such as :
• ASTM D2344; ASTM D3039; ASTM D3410; ASTM D3518; ASTM D6641
• EN 2377; EN 2561; EN 2597; EN 6031
• ISO 14126; ISO 14129; ISO 14130; ISO 527-4; ISO 527-5
• Review and revise material and process coordinating with vendors to resolve issues.
• Provide recommendations to `wider range of shop production problems, coordinating directly with manufacturing and quality personnel.
• Gain familiarity with mechanical test equipment and learn to conduct simple static tests.
• Work with lab technicians to manage more complex test programs.
• Develop proficiency with vendor audits to conducts audits unsupervised, coordinating with Supplier Product and Quality personnel.
• Familiar with DMA test process.




You'll Need:


• Knowledge of Composites Materials and industry test standards for aerospace materials – SAE, ASTM , MIL Standards etc.
• Experience of Test machines – MTS required
• CATIA V5 or CATIA V6, ENOVIA
• MS Office, Word, Excel, Powerpoint, Outlook


Education: BS Mechanical Engineering or Aerospace Engineering - Required. (MS Mechanical Engineering or Aerospace Engineering preferred)


Experience : 10 years’ experience in an aerospace environment ( with non-metallic material lab environment preferred)


Citizenship: US citizen


Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019392
Job Location: Fort Worth, TX
Input Date: 12/17/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Technicians

Description:
STS Technical Services is hiring Aircraft Interior Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations. Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and lerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Education:
High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.
Experience:
Journeyman Technician Role requiring Intermediate Skills to perform most of the standard tasks within the technical area assigned to.
Generally 2-4 years or more experience in area of responsibility with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Assignments require Standard Knowledge of a Technical Area. Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
Performs moderately complex Technical Assignments. Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions, Environment & Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35440
Job Location: Melbourne, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2020-11912

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Minimum Education: High School Diploma

 

What You’ll Do:

Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Work from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Make continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
What You’ll Need:

IPC-610 and IPC 620 experience is desired.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11912
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2020-11904

Contract Opportunity

Location: Clearwater, FL

Industry: Aerospace & Defense

Minimum Experience: 3 Years

 

What You’ll Do:

Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables.
Work from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Make continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.
Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
What You’ll Need:

Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
Must be able to read instructions and identify standard SMT components.
Must be able to work in a fast-paced environment where some overtime may be required.
Must be able to sit for long periods of time and focus on tedious tasks.
Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
Must have a minimum of 3 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
Ability to work under a microscope for long periods of time to perform inspection / solder repair.
Must be able to read and interpret assembly drawings.
Strong communication and organizational skills and ability to work in a team oriented environment.
Experience working in a LEAN Manufacturing environment
Strong leadership, mentoring and training aptitude
IPC-610 Certification
IPC J-STD-001 Certification
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

3 Years of experience in similar position
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11904
Job Location: Oldsmar, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 11 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Technician

Description:
Assembly Tech/Fitter - Hypersonics



Position Description of Assembly Tech:

Our client is seeking a qualified Fitter/Assembly Tech for its hypersonic line of business. With offices across the United States engaging in the defense, space, cyber and commercial fields.

Position Overview of Assembly Tech:

The Fitter/Assembly Tech will assemble and fit precision pipe and structural weldments from a variety of engineering materials for assembling and welding.

Candidate must be able to read and interpret mechanical drawings, blueprints and technical instructions and fabricate holding tolerances in accordance with engineering data.

Basic Qualifications of Assembly Tech:
Candidates must possess a High School diploma, GED or equivalent experience.
Candidates must have at least five (5) years of relevant assembly and fabrication experience with knowledge of part preparation for weld, close tolerance hole drill, layout and fabricate parts per the engineering drawing and specifications.
Candidates must have demonstrated experience reading and interpreting drawings/documents such as operating instructions, work instructions, and blueprint data.
Candidates must pass the DOT physical to operate company vehicles.
Candidates must be to lift and carry up to 40 lbs.
Candidates must have demonstrated experience effectively communicating within a team environment.

Candidates must be a resident of the North Alabama area or willing to relocate to the Huntsville - North Alabama, AL area.
Hours of operation are 6:00-4:30 Monday – Thursday with possible overtime.

Preference shown to Assembly Techs with:
Candidates who have experience and/or working knowledge of:
Fitting and assembling of close tolerance parts per the engineering drawings with working knowing of cutting, preparing, and assembling part prior to welding.
Ability to pass a drug screen and background check
 
Job Number: 8985
Job Location: Huntsville, AL
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Andrew Hall
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics and Electrical Systems Mechanical Installation Engineer

Description:
AES Mechanical Installation Engineer

Location: Wichita, KS (67215)

12 month contract

Job ID: #59539

The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.

• Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.

• Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 59539
Job Location: Wichita, KS
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter

Description:
CAD Drafter Core Responsibilities

Design and create product based on the approved quote/job contract 
Produce list of materials, fabrication drawings, approved samples, and customer’s field measurements.
Coordinate with fabrication department through all stages of fabrication, finishing, and packaging in order to ensure a finished product conforming to all required specifications.
Draft the shop drawings and following through with any changes required by customer/architect revisions
Responsible for coordination of job with customer throughout all stages of the project, participate on job review meetings, job site visits, field measuring and design implementation.
CAD Drafter Knowledge

Knowledge of manufacturing processes, engineering of architectural systems for commercial and residential structures, architectural and building documentation.
Understanding of industry standard drafting practices for architectural and mechanical drawings.
Hand sketching abilities.
Proficient with CAD software


CAD Drafter Educational/Experience

Associates degree
2+ Years Drafting
2+ Years Previously in Manufacturing Environment 
2+ Years Construction Experience 
Proficiency in AutoCAD or similar software 
 
Job Number: 8794
Job Location: North Haven, CT
Rate: Open
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Jeremy Hirsch
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

CDS Machine Operator

Description:
Chipton-Ross is seeking a CDS Machine Operator for an opening in Littleton, CO.

RESPONSIBILITIES:
Sets up and operates a variety of machine tools such as routers, lathes, milling machines, shapers, planers and precision grinders to make metal and composite parts, mechanisms tools or machines to exacting tolerances and dimensions. Interprets blueprints sketches and engineering specifications; determines sequence of operations number of cuts required and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work tooling feeds and speeds; measures marks and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material parts and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
0-3 years of work experience
Experience creating efficient CNC programs from engineering drawings and/or 3D models using MasterCAM. Shop level knowledge of Geometric Dimensioning and Tolerancing (GD&T). Align appropriate cutting tools for programmed operations. Knowledge of proper speeds and feeds for cutting tools and materials being cut. Proficient in CNC equipment setup using best shop practices. Capable of manually operating machine shop equipment. Able to work independently with little supervision. Knowledge of machine shop inspection tools. Skilled in operating manual mills and lathes. Knowledge of CNC Router. Experience with composite materials. Programming from 3D models. Ability to program 3D toolpaths.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Mon - Thurs, 3pm - 0130 am
Full-Time

 
Job Number: 187388
Job Location: Littleton, CO
Rate: $DOE
Duration: 3 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Senior Quality Technician

Description:
CL - Senior Quality Technician

Job ID # 2020-11873

Contract Opportunity

Location: Greensboro North Carolina

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Associate’s Degree

Minimum Experience: 1 Year

 

What You’ll Do:

Determine requirement compliance of mechanical, electro-mechanical and electronic parts and materials through visual inspection, electrical or mechanical screening, physical measurements and data analysis, and other tasks as assigned
What You’ll Need:

Secret Clearance
J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required.
Ability to learn industry standards such as J-STD-001, 002, IPC-610, etc and successfully complete certification instruction and testing
Detail oriented; results driven
Ability to read and interpret technical specifications, drawings, schematics, etc
Knowledge, understanding and experience with reviewing and conducting acceptance testing, performing/coordinating inspections though accepted methodologies and practices
Experience and understanding of Geometric Dimensioning and Tolerancing (GD&T) a plus
Knowledge of problem reporting, root cause corrective action tools and ability to facilitate/coordinate decisions and actions
Experience extracting, organizing and interpreting process data and ability to make improvement recommendations
Excellent understanding of flowing quality requirements to suppliers/sub-contractors
Strong ability to develop quality documentation (inspection plans, first article inspections, test reports, etc) using computer tools and applications, such as InspectionXpert or VisualFAIR
Strong ability to work cross functionally between associates, engineering groups, manufacturing, supply chain, program management, and supplier representatives
Proficient in Microsoft Office (Word, Excel, Powerpoint) and administration of Quality records and metrics
Proficiency in the use of Manufacturing/Enterprise IT Systems
Actively engage shop associates and office staff daily
A willingness and ability to obtain a secret clearance in a reasonable amount of time
Self-starter, hands-on know-how
Can work independently and collaboratively
Creative and critical thinking with a perseverance to solve problems
Ability to multi-task effectively
Commitment to ongoing professional development
Team player who thrives in challenges and takes on tasks with a high degree of accountability
Proactive and results oriented
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Associate’s Degree in a related discipline or the equivalent is require combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11873
Job Location: Greensboro, NC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

CNC Machinist

Description:
CNC Machinist
Primary Objective: 
Supports production operations by performing moderate to difficult machining operations.  A CNC Machinist II operates various types of machine tools and performs progressive machining operations for metal parts, tools and machines with close tolerance and focus on high quality and accurate parts.  May suggest edits to the NC programmer in the course of making parts. 

Key Job Duties:   
Reads and interprets specific machining instructions from complex blueprints, part and machine drawings.
Must be able to set up all tooling, write and execute complex programs.
Sets up, operates and programs a broad range of production work involving close tolerance and set ups that are exacting that are somewhat involved and have moderate to high degree of difficulty.
Performs other secondary operations such as stamping part numbers and deburring during machine cycle times.
Inspects machine parts to ensure they meet proper size, shape, or tolerance specs using micrometers and other measuring tools and devices.
Performs routine maintenance.
Performs quality audits of completed work within the machine shop department.
Must be able to write programs without assistance.
Participates in and contributes to the lean manufacturing journey.
Assists in other areas and performs additional tasks as needed.
Position may transition to second shift
 
Requirements
High School Diploma or GED required
Technical Degree in Machine Tool Technology or related field preferred
Must be good at problem solving, have good mechanical aptitude, and able to learn and understand job methods and instructions in a timely manner
2+ years of relevant machining experience desired
Excellent work history desired
Must be able to stand for long periods of time and regularly lift 50+ pounds on a regular basis
 
 
Job Number: 2010117810
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P3UrQAK&URLSource=cjhunter

CNC Operator

Description:
CNC Machinist
Primary Objective: 
Supports production operations by performing moderate to difficult machining operations.  A CNC Machinist II operates various types of machine tools and performs progressive machining operations for metal parts, tools and machines with close tolerance and focus on high quality and accurate parts.  May suggest edits to the NC programmer in the course of making parts. 

Key Job Duties:   
Reads and interprets specific machining instructions from complex blueprints, part and machine drawings.
Must be able to set up all tooling, write and execute complex programs.
Sets up, operates and programs a broad range of production work involving close tolerance and set ups that are exacting that are somewhat involved and have moderate to high degree of difficulty.
Performs other secondary operations such as stamping part numbers and deburring during machine cycle times.
Inspects machine parts to ensure they meet proper size, shape, or tolerance specs using micrometers and other measuring tools and devices.
Performs routine maintenance.
Performs quality audits of completed work within the machine shop department.
Must be able to write programs without assistance.
Participates in and contributes to the lean manufacturing journey.
Assists in other areas and performs additional tasks as needed.
Position may transition to second shift
 
Requirements
High School Diploma or GED required
Technical Degree in Machine Tool Technology or related field preferred
Must be good at problem solving, have good mechanical aptitude, and able to learn and understand job methods and instructions in a timely manner
2+ years of relevant machining experience desired
Excellent work history desired
Must be able to stand for long periods of time and regularly lift 50+ pounds on a regular basis
 
 
Job Number: 2010118545
Job Location: Oneida, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kate Burby
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P5sNQAS&URLSource=cjhunter

CREO Mechanical Engineers and Designers (CREO 4)

Description:
Looking for CREO degreed and non degreed Mechanical Engineers and Designers with heavy vehicle design experience. Also need CREO Cable Harness Design Engineers with BS Degrees.Develop mechanical assemblies, test equipment racks, and electrical harnesses
***MUST have CREO 4 experience***Creo (Pro/Engineer)/ Windchill
 
Job Number: PL CREO
Job Location: WA,CA, PA, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 02/11/2021
Last Updated: 03/05/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Assembler

Description:
Cable Assembler

Job ID # 2020-11874

Contract Opportunity

Location: Clearwater, FL

Industry: Aerospace & Defense

 

What You’ll Do:

Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Work from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Make continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
What You’ll Need:

Mandatory Must be able to Solder
Must have good manual dexterity
Strong mechanical build experience accurately reading and interpreting written work instruction, drawings, sketches, and wiring diagrams.
Experienced with working in an Electro Static Discharge (ESD) environment
Experienced with working with hand tools used in the assembly of cables and subassemblies
Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
Use of manual and automatic wire strippers.
Good written and oral communication skills
Good computer skills with ability to work from electronic work instructions.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11874
Job Location: Oldsmar, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Component Qualification Test Engineer

Description:
PDS Tech is seeking a Component Qualification Test Engineer that is familiar with the Sikorsky Test / Supplier Quality process in Stratford CT

The ideal candidate will:
  • Support and manage Hydro-Mechanical and Electro-Mechanical Supplier Component laboratory tests to validate component designs
  • Write technical documents for development and qualification requirements, procedures and results
  • Review supplier qualification plans, procedures, and reports and drawings.


Primary reason for this sub-contractor is to support supplier qualifications on FVL programs.




  
Must have:
  • Understanding of Supplier Component Qualification process
  • Expose and experience with the Sikorsky Supplier Qualification process and norms.
  • BS degree or higher in Mechanical Engineering
  • 20+ years of experience.
  • Ability to travel, including out of the country.
  • Knowledge of system engineering.

 
Job Number: 2010118879
Job Location: Stratford, CT
Duration: 15 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6jlQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Design Engineer ( Goleta, CA ) #10570519J

Description:
Design Engineer ( Goleta, CA ) #10570519J
12 Month Contract

Pay Rate: $50-65/hr Depends on experience

Minimum 2 years experience

The position is in Goleta CA, part of the Tactical Space Systems Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures.
As a Ground Support Equipment Engineer you will work with the flight hardware designers and be responsible for assisting and creating tools required to manufacture and test deployable structures and mechanical mechanisms at the cutting edge of space technology. You will be mission oriented and strive for innovative and cost effective technical solutions for successful program execution. You will work with a team from the concept creation through the design and analysis phases and may also participate in the manufacturing, testing, and integration of the systems.

**Looking for Responsibilities:
• Support and occasionally lead development of non-flight hardware: Create, prototype, design, and analyze Ground Support Equipment (GSE) required for manufacturing and testing moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and non-flight subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs, generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Document test plans and procedures requirements.
• Participate in internal and external (customer) design reviews as needed.
• Strive for the highest possible structural performance that is also cost effective and assures complete reliability.
• Manage and track multiple priorities while maintaining a focus towards common project goals of the program team, matrix organization, and customers.\\

**Basic Qualifications:
• Bachelor of Science Degree in a STEM (Science, Technology, Engineering, or Math) related field.
• Experience with mechanical computer aided design (CAD) software
• Strong communication skills, oral and written.
• Working knowledge Microsoft Office tools (Word, Excel, Power Point or Project)
• Ability to work independently as well as in a team environment.
• Ability to multitask and organize/prioritize job assignments in a fast-paced and gated-release engineering development environment.
• Candidate must be available to start immediately.
 
Job Number: #10570519J
Job Location: Goleta, CA
Rate: 65
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer Engineer- Alexandria, VA

Description:
We have an Excellent Contract position for an Engineering Designer to join a leading Company located in the Alexandria, VA area.

Job Responsibilities:
Develops designs for electronic, electro-mechanical, or mechanical equipment.
Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposals.
Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replaceability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development.
Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures.
Bachelor's degree or equivalent and 2+ years of related experience.
 
Job Number: 43158
Job Location: Alexandria, VA
Rate: $45.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Assemblers

Description:
STS Technical Services is hiring Electro-Mechanical Assemblers in Madison, Wisconsin to be responsible for assembly fiber optic products in various fiber-centric processes in a clean-room environment. This position will contribute to the team by performing other assembly functions, which may include: fiber pull test, cleaving, splicing, striping, cut and connectorization.

Responsibilities:
Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices
Work under minimal supervision on duties and tasks that are frequently non-routine, adapting procedures, techniques, tools, materials and/or equipment to meet special needs
Able to effectively communicate with other functional departments, such as Engineering, Purchasing, Manufacturing, Engineering, Quality, and Sales departments
Must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS)
Primary responsibility will be polishing fiber lenses on daily basic for various fiber
Perform other assembly functions, which may include: fiber pull test, cleaving, splicing, striping, cut and connectorization
Must be able understand written work instructions, mechanical drawing and schematic to properly assemble product to the highest of quality standards with zero scrap or rework
Support, communicate, reinforce and defend the mission, values and culture of the organization.
Requirements:
High school diploma or GED
A minimum of 2+ years of experience in specialty area (Electronic Assembly, Fiber Optics, Micro-mechanical Assembly).
Ability to work independently under the supervision of others.
Ability to work with small hand tools such as tweezers, vacuum wands and hex drivers.
Experience performing inspections using low and high powered microscopes preferred.
Flexibility to work OT to meet Production Demand and company goals
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35644
Job Location: Madison, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Dylan Knudson
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Electronics Technician

Job ID # 2020-11897

Contract Opportunity

Location: Ventura, CA

Industry: Aerospace & Defense

 

What You’ll Do:

Consist of electronics hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.
Fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings.
What You’ll Need:

Some climbing on ladders may be required as well as lifting up to 25lbs.
Candidate must be capable of working independently, discussing technical issues with customers, and working with vendors.
Looking for candidates require Electrical Troubleshooting and Wiring Harness Design experience.
Candidates must have the ability to Read Engineering Drawings
Areas of Expertise:
Electrical Troubleshooting
Wiring Harness Design
Technical Skills:
Ability to read engineering drawings
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Associate’s Degree in Electrical or Electronics Engineering is highly preferred but not required.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11897
Job Location: Ventura, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: BRENT SISK
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer

Description:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:
• Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
• Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:
• Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with Primary Development Environment:
• MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
• C/C++ code
• C# test scripts
• Serena Dimensions / PVCS
• Git
• Embedded Software Development environments
 
Job Number: swe1
Job Location: Ft. Worth, TX
Per Diem: Split
Duration: 6 - 12 Months
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

Engine System Design Engineer – Level 4

Description:
Inconen is looking for an Engine System Design Engineer – Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-10+ years of related experience.
 
Job Number: 14979
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 03/02/2021
Last Updated: 03/05/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III ( Magna, Utah ) S10577334J

Description:
Engineer III ( Magna, Utah ) S10577334J
12 Month Contract

Pay Rate: Open

Note: Active Secret Clearance Required

Ordnance Engineer Role description & Responsibilities:
The Future ICBM Sustainment and Acquisition Contract (FISAC) Propulsion Subsystem Support Contract (PSSC) Engineer is responsible for ensuring sustainment engineering of the Minuteman III weapon system at the Hill Air Force Base facility.

Overall responsibility: Provides technical support of the Air Force ICBM missile system for the ordnance components by defining, organizing, and managing assigned PSSC projects from conception through execution. Major roles and responsibilities include: Providing technical support of Ordnance Aging and Surveillance (AS) activities for the Minuteman III system. Coordinates AS testing and analyses and performs modeling of subsystems as required. Functions as part of a customer directed Integrated Product Team (IPT), working directly with the customer and subcontracted suppliers to support ongoing Minutemen III system maintenance operations to ensure missile force readiness. Develops stage and component AS test requirements, planning and procedures, oversite of testing, and performs analyses of test data to provide Service Life Estimates. Uses specific knowledge to successfully research, plan, communicate and achieve objectives through program and/or project team. Provide technical support of all phases of design analysis, development, integration and implementation. Analyzes, evaluates, and plans methods of approach and organized means (integrated logic flow diagrams) to integrate new products or technologies into the system. Directs projects and coordinates activities concerned with technical activities, engineering design evaluations and project schedules to complete projects within budget and scheduling restraints.

Job Duties: Engineer role for technical support of Ordnance Surveillance (AS) activities for the Minuteman III system
• Test planning role for Aging and Surveillance tests for Service Life Estimates
• Perform modeling of motor systems as required
• Represent the PSSC program to the Air Force customer at the Hill Air Force Base office

Experience Requirements:
• BS/MS in aerospace, mechanical, electrical or chemical engineering.
• 5-10 years of engineering experience
• Ordnance components and systems Ability to travel (if applicable): Travel expectation of 10% Experience Preferred:
• Ability to direct others: Coordinate Engineering as well as teams of multiple disciplines.
• Ability to present in customer reviews , System Integration Team, as well as working group meetings • Minuteman III ordnance
• 3D CAD modeling (NX preferred)
• Finite element analysis
 
Job Number: S10577334J
Job Location: Magna, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Engineering Tech

Description:
PDS Tech is currently recruiting for an Engineering Tech for a client of ours in Hollister, CA.  Please send your resume to pzack@pdstech.com for consideration.  
 
  • Under manager supervision, build, test, debug, and repair development hardware per engineering drafted work instructions
  • Provide design and process improvement feedback to engineers.
  • Able to work with minimal direction
  • Fabricate test samples to perform various mechanical, ballistic, electrical and chemical tests to support development programs per engineering drafted work instructions.
  • Knowledgeable in basic inspection and hand tools
  • Interpret drawings and instructions
  • Requires travel up to 20% of the time
  • Soldering experience including use of heat guns for shrink tubing operations a plus.
  • Leverages other factory resources and personnel to get work done for the team
  • Must be willing and able to obtain a security clearance
  • Perform other related duties as assigned
  • Ability to train other associates as needed.
  • Section inert welded parts a plus.
  • Ability to perform basic machining functions (no energetic parts). 
  • Oversees build and testing process flow of development hardware.      

  • Education Required:          High school diploma or equivalent.  Technical training and job related certifications preferably in special processes.
  • Experience Required:        3-5+ years directly related experience in a manufacturing and/or engineering proto type environment.

 
Job Number: 2010119057
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7SZQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
A Engineering Technician job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. To be considered for this role, you will need 2+ years of experience with a Associates Degree in related field or study.

Engineering Technician Job duties:
* Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
* Constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure company systems and components meet established specifications.

Qualifications:
* Associate's degree in a related field of study and at least 2 years of relevant experience.
* A higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Previous experience and/or certifications within the aerospace and defense industry.
* Previous experience in a manufacturing environment.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* The ability to obtain and maintain a Security Clearance may be required Learn more about the background check process for Security Clearances.

If you are interested in this Engineering Technician job in Louisville, CO, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 305953
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 12/04/2020
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
A Engineering Technician job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. To be considered for this role, you will need 2+ years of experience with a Associates Degree in related field or study.

Engineering Technician Job duties:
* Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
* Constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure company systems and components meet established specifications.

Qualifications:
* Associate's degree in a related field of study and at least 2 years of relevant experience.
* A higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Previous experience and/or certifications within the aerospace and defense industry.
* Previous experience in a manufacturing environment.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* The ability to obtain and maintain a Security Clearance may be required Learn more about the background check process for Security Clearances.

If you are interested in this Engineering Technician job in Louisville, CO, please apply via the 'apply now' link provided.? Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at?http://www.belcan.com.
 
Job Number: 305952
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 12/09/2020
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

F5 Engineering Ground Test / Structural Laboratory Technicians (1st Shift)

Description:
PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test / Structural Laboratory Technicians in Stratford CT.

The Structural Lab Technician should be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.
  • Must possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2010113683
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnLJQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Inconen is looking for a Flight Test Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

The following are preferred:
1. Experience developing test plans to support onboard fixed wing experimental flight test aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience performing onboard testing of fixed wing aircraft.
3. Experience analyzing data from an airplane level test to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. 2. Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12598
Job Location: Savannah, GA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fluid Dynamic Analysis

Description:
• Proficiency using analysis tools such as STAR-CCM®, CFD++, Tecplot, Pointwise, or equivalents.
• Perform fluid dynamic analyses of high-speed (supersonic/hypersonic) flow in support of propulsion system design and verification activities.
• Develop mathematical models to match the physics of the system under evaluation including proper analysis methods/tools, proper boundary conditions, and appropriate material properties.
• Analyses will be performed utilizing hand calculations, low fidelity tools, and or high fidelity computational fluid dynamics (CFD) packages such as StarCCM+ and CFD++.
• Interpretation of analytical results and pertinent recommendations pertinent to system improvement.
• Preparation of technical reports and presentations of work product to both internal and external customers.
• Provide technical assessments of test hardware and test data including validation of analysis
• Support propulsion and subsystem IPT leads to ensure technical and cost execution of each system component.
• Due to the complex nature of the systems analyzed, the position requires working closely with multiple engineering disciplines including but not limited to Mechanical Design, Thermal, Structural, and Project Engineering, and to achieve program objectives in a timely manner.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Orb-FL-Fluid
Job Location: Palm Beach Gardens, FL
Rate: $83.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Ground Test Engineer

Description:
PDS Tech, Inc. is seeking a Ground Test Engineer, in Stratford, CT
Description:
  • Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
  • Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
  • Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
  • Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
  • This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
  • Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
  • Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts. 
  • Support and manage the development, coordination and conducting of technical tests and evaluation of engineering design concepts and understands and can develop and analyze test plans.
  • Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
  • Compilation and analysis of performance reports

 
Experience/Qualifications 
  • BA/BS candidates require 4-7+ years’ experience, 
  • MA/MS candidates require 2-5+ years’ experience, 
  • PhD candidates require 0-2+ years’ experience. 

 
Job Number: 2010113302
Job Location: Stratford, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr1SQAQ&URLSource=cjhunter

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
 
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
 
The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
 
They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
 
They will:
  • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
  • Support and manipulate Microsoft based tools in support of project schedule and status.
  • Communicate with other program integrated product teams.
  • Compile and analyze performance reports.


.
The ideal candidate will have:
  • Superior business and data skills,
  • Knowledge of IMS based project management and can work in a team environment.
  • Understanding of Aerospace, Helicopter and / or development program experience
  • Knowledge of mechanical / structural design and test

 
Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
 
 
Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Systems Lead

Description:
A Hardware Systems Lead job in Bloomington, MN is currently available through Belcan. In this role, you will be responsible for research, design, develop, and integrate information processing hardware to operate in a harsh military environment. To be considered for this role, you will have a Bachelor's or Master's degree in Electrical Engineering, Systems Engineering, Computer Engineering, or equivalent Due to the nature of the work performed in this facility, US citizenship is required. The ability to obtain and maintain a Security Clearance required. This is a Direct/FT role with a great company.

Hardware Systems Lead Job duties:

* Research, design, develop, and integrate information processing hardware to operate in a harsh military environment.
* Lead cross-functional teams of electrical, mechanical, and integration and test engineers with the implementation of state-of-the-art systems
* Design circuit cards to systems - electrical and mechanical
* Synthesizes solutions to meet customer expectations and technical performance while staying within schedule and cost constraints
* Manage component suppliers
* Perform technical planning, cost and risk analyses, and supportability and effectiveness analyses for subsystems and system elements
* Experience leading engineering teams with the implementation of complex multi-core microprocessor designs
* Excellent use and understanding of systems engineering concepts, principles, and theories
* Excellent proficiency with requirements management & system modeling tools
* Effective in communicating issues, impacts, and corrective actions

Qualifications:
* Bachelor's or Master's degree in Electrical Engineering, Systems Engineering, Computer Engineering, or equivalent
Working experience/knowledge with several of the following technologies:
* 1553
* VITA 46
* Various memory types including DDR2, DDR3, SDRAM, SRAM
* Xilinx FPGAs
* Gigabit Ethernet
* Fibre Channel
* PCIe
* VME64

If you are interested in this Hardware Systems Lead job in Bloomington, MN, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 305698
Job Location: Bloomington, MN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 11/17/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Helicopter Fuel System Integration Lead

Description:
This position is responsible for leading the integration effort of a helicopter fuel system. Includes coordination of integration efforts between internal client teams and external suppliers.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Mechanical/Electrical/Computer/Aerospace Engineering
* Mechanical Engineering background
* Hydromechanical Fuel/Lube System knowledge including pumps, LVDTs, pressure transducers, flow transducers, etc.
* Fuel/Control System Integration experience
* Supplier Management experience

PREFERRED SKILLS:
* Aircraft Engine Combustion knowledge

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

Hot Stamp Operator

Description:
As a Hot Stamp Operator, you'll be trained how to operate each machine utilized in production of insert chip technology secured cards. You will be responsible for the set up and operation of the machines and will program computer batches from an order ticket to load data. In this role you will perform quality checks, confirm quantity produced, and ensure the batch is correct per the job ticket. A great machine operator is reliable and able to work with attention to detail and safety standards. The overall goal of this role is to ensure that production procedures are carried out smoothly to maximize efficiency.

In this role, you will perform the following duties:
o Set up machines (calibration, cleaning etc.) to start a production cycle.
o Control and adjust machine settings, according to the job ticket.
o Feed raw material or parts to semi-automated machines.
o Inspect parts with precision and measuring tools.
o Test operation of machines periodically.
o Resolve machine errors and issues that might occur while operating.
o Maintain activity logs related to daily secured card production.
 
Basic qualifications for consideration:
o High School Diploma or equivalent is preferred but is not required.
o Experience in a fast paced, high volume production environment and understanding of production concepts.
o Strong mechanical aptitude.
o Deep knowledge of production operation.
o Experience operating a computer workstation.
o Ability to work overtime including Holidays and weekends during peak periods.
o Flexibility with working in other areas on occasion.
o Strong ability to multi-task.
o Ability to work with associates with collaboration related to productivity, safety and quality of work.

Physical Requirements:
o Be able, as it is necessary-to climb, stretch, crouch or kneel.
o Successful performance requires good vision including close vision for accurate attention to detail.
o Work requires incumbent to be mobile and in a standing / walking position.
o Ability to lift up to 50 lbs regularly.
o Uses hands to handle, finger, or feel objects and to perform keyboarding.
 
 
Job Number: 2010115285
Job Location: Nashville, TN
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou0wQAC&URLSource=cjhunter

In process Inspector

Description:
PDS Tech is currently recruiting for an In Process Inspector in the Hollister, CA area.  

This role has potential for overtime and pay differential for 2nd shift.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 2010119109
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7YSQA0&URLSource=cjhunter

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector

Description:
Inspector

Job ID # 2020-11868

Contract Opportunity

Location: Manassas, VA

Industry: Aerospace & Defense

 

What You’ll Do:

Use predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices.
Accept, reject, or rework defective or malfunctioning units or systems.
Work from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.
May monitor and verify quality in accordance with statistical process or other control procedures.
Perform receiving inspection of incoming material to the requirements of the Purchase Order, drawing, pertinent specifications and inspection procedures.
Review of supplier documentation for accuracy and completion, including First Article Inspection (FAI) documentation will be required.
Log all inspection results in the Common Operating System (COS).
Document any defects in COS and P2P.
Coordinate with Supply Chain Quality Engineering on generation and closure of defect notifications.
What You’ll Need:

Must be able to lift 40 lbs and move material weighing up to 600 lbs with a pallet jack.
Ability to use basic mechanical inspection tools such as calipers, micrometer, height stand/indicator.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11868
Job Location: Manassas, VA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector ( Chandler, AZ ) 10169427J

Description:
Inspector ( Chandler, AZ ) 10169427J
12 Month Contract

Pay rate: $25-30 /hr , maybe more for the right experience

2nd shift - 3PM-12:30AM

Skills:
J-Std-001, IPC-A620 certifications Cable harness an electronic assembly inspection experience Aerospace Inspection

Job Snapshot: Must be familiar with aerospace mechanical and electronics systems and subsystems. Experience with inspection/fabrication of electro-mechanical assemblies, cable harness assemblies and soldering of electrical/electronic assemblies.
Minimum 5 years of experience in electronics/harness inspection activities.

Trained to the following industry standards:
IPC-A-620 or equivalent and J-STD-001.
Read and interpret schematics, bill of materials, assembly drawings, inspection drawings or any other type of reference material required to perform tasks.
Familiar with ESD counter measures.
Must be able to lift and move part totes up to 40lb.

Minimum Qualifications/Education/Experience (or equivalent combination of experience and education):
A High School Diploma or General Education Degree, plus at least four (5) years of related experience is required. US Citizenship required.
 
Job Number: 10169427J
Job Location: Chandler, AZ
Rate: 30
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist

Description:
Machinist

Job ID # 2020-11857

Contract Opportunity

Location: Baltimore, MD

Industry: Aerospace & Defense

 

What You’ll Do:

Set up and operate a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.
Interpret blueprints, sketches, and engineering specifications.
Determine sequence of operations, number of cuts required, and method of setup
Use a variety of machinist's hand tools and precision measuring instruments
Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds.
Measure, mark, and scribe dimensions and reference points to lay out stock for machining.
Fit and assemble precision parts into mechanical equipment and determines material, parts, and equipment required.
May modify numerically controlled programs on numerically controlled (NC) machines.
May monitor and verify quality in accordance with statistical process or other control procedures.
Typically requires completion of a formal apprenticeship or equivalent training and experience.
What You’ll Need:

Technical Skills:
Basic machine shop equipment
Machine shop
Meatal cutting/Machining-ferrous
Metal cutting/Machining-non-ferrous
Set-up and operate lathe and milling machine
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11857
Job Location: Baltimore, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mech Sys Design & Anlys Engr

Description:
Mech Sys Design & Anlys Engr

Job ID # 2020-11906

Contract Opportunity

Location: El Segundo, CA

Industry: Aerospace & Defense

Minimum Clearance: Top Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 9 Years

 

What You’ll Do:

Lead and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design.
Lead activities to validate and verify mechanical and fluid systems requirements.
Lead the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation.
Perform and document analyses.
Manage supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
Prioritize, delegate and track performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design.
Support proposal preparation and new business development efforts.
Train and coach others.
Work under minimal direction.
Ensure a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering.
Develop and verify space vehicle mechanical design.
Analyze and verify mechanical performance of hardware components a vehicle.
Perform detailed system design and verification activities.
Support system level integration and validation.
Analyze system level performance.
Perform analyses and trades in support of a rapid prototype system.
Manage performance of critical suppliers to ensure subsystem compliance and delivery.
What You’ll Need:

Top Secret Clearance
9 years or more of experience in aircraft or spacecraft mechanical design.
3 years or more of experience in supplier technical evaluation and technical performance management.
This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design. Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment.
This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our team’s capabilities
Preferred Qualifications:
Experience leading an integrated product multi-disciplinary team
Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
Experience integrating design at spacecraft level
Experience working with spacecraft mechanical design
Experience in development, build and test of small and medium-sized space vehicles
Experience in dynamic rapid prototyping environment
Experience working on proprietary programs with a variety of Government entities in a classified environment
SSBI (Single Scope Background Investigation) highly desired
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Engineering, Computer Science, Mathematics, physics or chemistry combined with 9 + years of relevant work experience; or an equivalent combination of technical education and experience. ABET accreditation is the preferred, although not required, accreditation standard.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11906
Job Location: El Segundo, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Mechanical Systems Design & Analyst Engineer 4 Top Secret

Description:

PDS Tech, Inc. is seeking a Mechanical  Systems  Design & Analyst Engineer 4 Top Secret in El Segundo, CA
Description

  • Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design.
  • Leads activities to validate and verify mechanical and fluid systems requirements.
  • Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation.
  • Performs and documents analyses.
  • Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
  • Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design.
  • Supports proposal preparation and new business development efforts.
  • Trains and coaches others.
  • Works under minimal direction.
  • The Lead Mechanical Engineer is responsible for ensuring a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering.

Primary Responsibilities
*Develop and verify space vehicle mechanical design.
*Analyze and verify mechanical performance of hardware components a vehicle.
*Perform detailed system design and verification activities.
*Support system level integration and validation.
*Analyze system level performance.
*Perform analyses and trades in support of a rapid prototype system.
*Manage performance of critical suppliers to ensure subsystem compliance and delivery.


Education
  • Bachelors of Science degree in Aerospace, Civil or Mechanical Engineering. *9 years or more of experience in aircraft or spacecraft mechanical design. *3 years or more of experience in supplier technical evaluation and technical performance management.


Basic Qualifications

  • This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design.
  • Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment.
  • This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our teams capabilities.


Preferred Qualifications
*Experience leading an integrated product multi-disciplinary team
*Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
*Experience integrating design at spacecraft level
*Experience working with spacecraft mechanical design
*Experience in development, build and test of small and medium-sized space vehicles
*Experience in dynamic rapid prototyping environment
*Experience working on proprietary programs with a variety of Government entities in a classified environment
*SSBI (Single Scope Background Investigation) highly desired

 
Job Number: 2010119880
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P9fuQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design in Phoenix AZ

Description:
We have an Excellent contract position for a Design Specialist to join a leading Company located in the Phoenix, AZ area.
** Position requires U.S Citizenship.
• Creates innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications.
• Ensures designs are free of layout process defects.
• May assist engineers with defining design standards and configurations.
• Applies Computer Aided Design (Creo 4) methodologies, theories, and techniques.
• Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions.
• Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design and drafting.
• Must be skilled in the creation of model-centric models and drawings utilizing Creo 4.
• Send your resume and include the job ID 43082
 
Job Number: 43082
Job Location: Phoenix, AZ
Rate: $38.60
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Mechanical Designer

Description:
Automation, robotics, and Inventor
 
Job Location: Pittsburgh, PA
Input Date: 11/23/2020
Firm Name: BELCAN TECHSERVICES
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Email: bcampbell@belcan.com
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer- NX

Description:
Sr. Mechanical Designer

Summary of Job Description:

The Senior Mechanical Designer will be working under the direction of the Systems Engineer and Mechanical Engineers, the Designer will create 3-D CAD models and assemblies in support of proper design at the component or subsystem level. The Designer will also work collaboratively with other Designers on the program to ensure best practices of solid modeling are properly implemented in the design and development of vehicle transportation systems for Military applications. The Designer will also work closely with the assigned Engineer in the completion of the drawing package.

Job Requirements:

Provide 3D design support utilizing Siemens NX Solid Modeling Software (2-3 years exp min)
New Product Design Experience
Experience with design of vehicle suspension systems
Experience with steering axles and Trunnion Suspension experience are a bonus
Siemens NX Drawing development/creation
Experience developing vehicle transport systems a plus
Job Requirements:

Positions is based in Florence KY
 
Job Number: 8677
Job Location: Florence, KY
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Must have strong mathematical and problem solving skills

Must have strong communication skills and the ability to interact will all organizational levels

Able to work with design services to create detailed drawings and provide technical support for concurrent engineering

Able to support procurement and on site prototype build/integration activities and resolve issue

Able to read technical drawings. Working knowledge of GD&T is a plus.

Self starter, highly motivated

Work in an Integrated Product Team environment and be able to communicate across functional organizations

Performing failure analysis & be able to provide technical direction for corrective action solutions
 
Job Number: 48981
Job Location: MI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer -NX

Description:
Mechanical Engineer

Summary of Job Description:

The Mechanical Engineer will be working under the direction of the Sr Project Engineer, the Mechanical Design Engineer will create 3-D CAD models and assemblies in support of proper design at the component or subsystem level. The Mechanical Design Engineer will also work collaboratively with other engineers and designers the design and development of vehicle transportation systems for Military applications.

Job Requirements:

New Product Design Experience
Experience with design of vehicle suspension systems
Experience with steering axles and Trunnion Suspension experience are a bonus
Siemens NX Solid Modeling experience
Ansys Mechanical APDL(structural analysis)
Experience developing vehicle transport systems a plus
BOM generation
Familiar in product development utilizing weldments fabrication, sheet metal fabrication and Bolted Joints
Job Requirements:

Positions is based in Florence KY
 
Job Number: 8678
Job Location: Florence, KY
Start Date: asap
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Kathy Beattie
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
With sustaining experience
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E
 
Job Location: CT/IN/FL/OR
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Mechanical System Design & Analysis Engineer 4

Description:
Chipton-Ross is seeking a Mechanical System Design & Analysis Engineer 4 located in El Segundo, CA.

RESPONSIBILITIES:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others. Works under minimal direction.

The Lead Mechanical Engineer is responsible for ensuring a comprehensive space vehicle design, with inputs from other design disciplines and systems engineering. This position requires sound technical judgment, and the ability to rapidly make decisions that balance the overall space vehicle design. Ideal candidates will possess strong organizational skills and the ability to adapt to a fast-paced and continually changing environment. This position will require strong team-work and communication skills to effectively work across multiple program teams, internal organizations and assist our programs as we grow our teams capabilities.

ADDITIONAL RESPONSIBILITIES:
Develop and verify space vehicle mechanical design.
Analyze and verify mechanical performance of hardware components a vehicle.
Perform detailed system design and verification activities.
Support system level integration and validation.
Analyze system level performance.
Perform analyses and trades in support of a rapid prototype system.
Manage performance of critical suppliers to ensure subsystem compliance and delivery.

REQUIRED EXPERIENCE:
Bachelors of Science degree in Aerospace, Civil or Mechanical Engineering.
9 years or more of experience in aircraft or spacecraft mechanical design.
3 years or more of experience in supplier technical evaluation and technical performance management.

ADDITIONAL EXPERIENCE:
Experience leading an integrated product multi-disciplinary team
Experience incorporating design requirements from a multi-disciplinary team into mechanical design.
Experience integrating design at spacecraft level
Experience working with spacecraft mechanical design
Experience in development, build and test of small and medium-sized space vehicles
Experience in dynamic rapid prototyping environment
Experience working on proprietary programs with a variety of Government entities in a classified environment

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience).

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

TRAVEL: YES
Frequent travel to Kent, WA may be required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 187761
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Engineers

Description:
A fundamental understanding of aircraft design and construction principles.
The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.

Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
Strong technical skills with mechanical systems.
The following are preferred skills:
Aircraft engineering experience, e.g. G650, G500, G600.
Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
Aircraft landing gear experience.

Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

1st of 2nd Shift positions

Email resume to: mmccarthy@pdstech.com
 
Job Number: Mech-Sys-Gulf
Job Location: Savannah, GA
Rate: $65.00-$68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
A Mechanical Systems Design Engineer job in Kent, WA is currently available through Belcan. In this role, you will be responsible for supporting the design, development, and test of launch vehicle mechanical systems. To be considered for this role, you will have a Bachelor's degree in an Engineering discipline, and five years of experience designing Aerospace or equivalent type mechanical system elements within aircraft, spacecraft, or launch vehicles.

Mechanical Systems Design Engineer Job duties:

* Participate in the entire design cycle of mechanical subsystems, including conceptual and detailed design, trade studies, structural analysis, development testing and qualification
* Generate 3-D models, component drawings, assembly drawings, and interface control documents with application of GD&T per ASME Y14.5
* Create documentation for assembly and testing of development and flight hardware
* Participate in subsystem level testing including planning, execution, data reduction and analysis
* Develop component specifications, manage suppliers, provide manufacturing and production support

Qualifications:

* Strong mechanical design and integration skills using 3D modeling tools (CREO preferred)
* Experience in Creo (Pro-E) piping and routed system tools
* Experience in Creo (Pro-E) kinematic mechanism design or other mechanism analysis tools
* Experience in structural FEA using ANSYS, NASTRAN or similar tools
* Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

If you are interested in this Mechanical Systems Design Engineer job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 305374
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
This position is either a Second Shift or a Weekend Shift position. Both are 40 hour work weeks with possible time and a half overtime.

Unique Skills:
The following unique skills are required:
1) A fundamental understanding of aircraft design and construction principles.
2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
3) Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
4) Strong technical skills with mechanical systems.

The following are preferred skills:
1) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
2) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
3) Practical hands on aircraft repair experience and problem solving.
4) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.



Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Company's products and services

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 132875
Job Location: Savannah, GA
Rate: $65.00
Per Diem: Possible
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
Required skills:
1) A fundamental understanding of aircraft design and construction principles.
2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
3) Experience using computer-aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
4) Strong technical skills with mechanical systems.
The following are preferred skills:
1) Gulfstream engineering experience, e.g. G650, G500, G600.
2) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals. 3) Aircraft landing gear experience.
4) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
5) Practical hands on aircraft repair experience and problem solving.
6) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

2 positions available (1) 2nd Shift only and (1) weekend only
All applicants must be U. S. Citizens or permanent residents of the U.S.
No visa sponsorship available
 
Job Number: 306-307
Job Location: Savannah, GA
Rate: 65.00 - 68.00
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - 2nd Shift

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• A fundamental understanding of aircraft design and construction principles.
• The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
• Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
• Strong technical skills with mechanical systems.

Preferred Skills:
• Aerospace company engineering experience.
• Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
• Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
• Practical hands on aircraft repair experience and problem solving.
• Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-445
Job Location: Savannah, GA
Rate: $65-68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 12/17/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Weekend Shift

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• A fundamental understanding of aircraft design and construction principles.
• The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
• Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
• Strong technical skills with mechanical systems.

Preferred Skills:
• Aerospace company engineering experience.
• Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
• Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
• Practical hands on aircraft repair experience and problem solving.
• Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-444
Job Location: Savannah, GA
Rate: $65-68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer, Service Engineering (2nd Shift)

Description:
Inconen is looking for a Mechanical Systems Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

The following unique skills are required:
1) A fundamental understanding of aircraft design and construction principles.
2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
3) Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
4) Strong technical skills with mechanical systems.

The following are preferred skills:
1) Gulfstream engineering experience, e.g. G650, G500, G600.
2) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
3) Aircraft landing gear experience.
4) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
5) Practical hands on aircraft repair experience and problem solving.
6) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12589
Job Location: Savannah, GA
Rate: $65.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/11/2021
Last Updated: 02/11/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer, Service Engineering (Weekend Shift)

Description:
Inconen is looking for a Mechanical Systems Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

The following unique skills are required:
1) A fundamental understanding of aircraft design and construction principles.
2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
3) Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
4) Strong technical skills with mechanical systems.

The following are preferred skills:
1) Gulfstream engineering experience, e.g. G650, G500, G600.
2) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
3) Aircraft landing gear experience.
4) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
5) Practical hands on aircraft repair experience and problem solving.
6) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12588
Job Location: Savannah, GA
Rate: $65.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer, Service Engineering - Weekend Shift or 2nd Shift

Description:
The following skills are required: 1) A fundamental understanding of aircraft design and construction principles. 2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc. 3) Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures. 4) Strong technical skills with mechanical systems. The following are preferred skills: 1) Gulfstream engineering experience 2) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals. 3) Aircraft landing gear experience. 4) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously. 5) Practical hands on aircraft repair experience and problem solving. 6) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.
 
Job Number: 20-156306
Job Location: GA
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineers & Electrical - UGNX

Description:
*UGNX Experience a Must
*Must have BS Engineering Degree
*Fighter Aircraft Background
*ECS/Hydraulics/Mechanical

*Electrical/Wiring Design

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Mech & Ele
Job Location: St. Louis, MO
Rate: $55.00-$62.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: November 2020
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician

Description:
1. Interpreting engineering drawings
2. Performing assembly of Aerospace hardware
Ineligibility to receive security clearance
Fabricate and test mechanical components and subsystems
Fabricate and test high pressure hardware and electro-mechanical components relevant to launch vehicle.
High Pressure Pneumatic and Ordnance experience required

• Must be able to read drawings, interpret engineering drawings, perform assembly of prototype items along with production items.
• Past or present Aerospace experience with assembly of vehicle component sub and top assemblies (this is a space vehicle not a car)
• Past Military experience
• Able to work extended hours and weekends
• Knowledge of ESD and FOD Control
• Able to perform modifications to mechanical hardware
• Must be able to lift 50lbs. Must be able to travel for long periods.
• Must currently hold DOD or able to obtain a secret security clearance and be able to obtain a BATF permit for handling explosives.
• Must be able to travel for long periods.
• Ability to communicate effectively and work with leaders, peers, and others as required.
 
Job Number: 2598LA
Job Location: New Orleans, LA
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Mechanical or Manufacturing Engineers

Description:
Project management or overhaul experience
 
Job Location: West
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations Specialist

Description:
Operations Specialist

Job ID # 2020-11903

Contract Opportunity

Location: Tallahassee, FL

Industry: Aerospace & Defense

Minimum Education: GED

Minimum Experience: 1 Year

 

What You’ll Do:

Responsible for harness, electrical, and mechanical assembly including but not limited to: routing wires, plugging wires, crimping contacts, make electrical connections with solder, assembling hardware, tightening hardware, complete testing of electronic units.
What You’ll Need:

Be able to use simple hand tools, power tools, fixtures and direct reading test devices.
Work safely following OSHA and ISO guidelines.
Must be able to interface with computerized work instructions as well as read and follow drawings.
MUST be able to inspect and verify work performed is in accordance with requirements.
Able to become IPC certified in Soldering.
Capable of lifting 20+ lbs without assistance.
Must be able to wear Personal Protective Equipment as required.
Must be able to communicate effectively with Supervisor.
Must be able to follow instructions.
Must be willing to work overtime during the week and including weekends.
Willing to work multiple shifts and holidays.
Strong PC skills using MS Word, Excel, and applicable software
Excellent verbal and written communication skills
Strong initiative & self-starter, requires minimal supervision
Demonstrates ability to lead and work proficiently within a team environment
Must be able to work overtime during the week or weekend as needed and as defined by supervisor.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

GED combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11903
Job Location: Tallahasee, FL
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11900

Contract Opportunity

Location: NAS Whidbey Island, WA

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
What You’ll Need:

Secret Clearance
Limited travel may be required to support other teams or sites
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 4 + years of relevant work experience; or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11900
Job Location: Whidbey Island, WA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11901

Contract Opportunity

Location: NAS Whidbey Island, WA

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
What You’ll Need:

Secret Clearance
Limited travel may be required to support other teams or sites
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 4 + years of relevant work experience; or an equivalent combination of education and experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11901
Job Location: Whidbey Island, WA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11899

Contract Opportunity

Location: NAS Whidbey Island, WA

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: High School Diploma/GED

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
What You’ll Need:

Secret Clearance
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 4 + years of relevant work experience, or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11899
Job Location: Whidbey Island, WA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Support Engineer

Description:
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Modifies mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical standards and best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly issues.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Generates engineering design change orders • Generates engineering Bills of Materials (BOMs) • Uses established and well defined engineering procedures.
• Able to work simultaneously on a variety of projects.

• In pursuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology • 0-3 years of experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4111
Job Location: Northwest, MA
Rate: $29-$40
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: 6/22/2020
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Integrator Manufacturing Engineer

Description:
Inconen is looking for a Program Integrator Manufacturing Engineering for our client, a well-known Aerospace Company, in Huntsville, AL.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
1. Develop the internal execution plans and interface with key team members to ensure alignment of site and program objectives.
2. The key responsibilities is creating the plans to integrate several teams such as manufacturing engineering, tool engineering/design, manufacturing operations so that products can be developed and delivered per schedule and budget targets.

Essential Job Functions (Including % of Time for Each)
50% - Establish and oversee program plans for the operations site team to successfully execute the program requirements relative to schedule, cost, and performance/quality. This will include hardware manufacturing, tool design and fabrication, staffing, process development, and facility needs.
30% - Interface with program teams members and customers to ensure the program needs and site plans are in alignment. Develop recovery plans when issue arise and coordinate applicable corrective actions.
20% - Work special projects as assigned and recommend improvements to key processes that would improve the overall flow of the site's products.

Skills:
REQUIRED:
1. Experience working and developing program plan and execution on the Orion JM Program.

DESIRED:
1. Direct Orion JM program experience.
2. Experience with composite manufacturing and with the aerospace industry is also highly desired.
3. Must have strong written and verbal communication skills and the ability to analyze, evaluate and develop solutions to technical problems with minimum supervision.
4. Experience and familiarity with MS Office products required.

Education:
1. Bachelor’s degree in Industrial Technology, Manufacturing Engineering, Mechanical Engineering or related major and at least 9 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 12596
Job Location: Huntsville, AL
Rate: $45.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/21/2020
Last Updated: 11/30/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manufacturing Engineer- Huntsville, AL

Description:
We have an Excellent Contract position for a Program Integrator Manufacturing Engineering to join a leading Company located in the Huntsville, AL area.
Develop the internal execution plans and interface with key team members to ensure alignment of site and program objectives. The key responsibilities are creating plans to integrate several teams such as manufacturing engineering, tool engineering/design, manufacturing operations so that products can be developed and delivered per the schedule and budget targets.

Job Responsibilities:
Establish and oversee program plans for the operations site team to successfully execute the program requirements relative to schedule, cost, and performance/quality. This will include hardware manufacturing, tool design and fabrication, staffing, process development, and facility needs.
Interface with program team members and customers to ensure the program needs and site plans are in alignment.
Develop recovery plans when issues arise and coordinate applicable corrective actions.
Work special projects as assigned and recommend improvements to key processes that would improve the overall flow of the site's products.

Bachelor’s degree in Industrial Technology, Manufacturing Engineering, Mechanical Engineering, or related major and at least 9 years of related experience (or an equivalent combination of education and experience).
Experience working and developing program plan and execution on the Orion JM Program.
Direct Orion JM program experience.
Experience with composite manufacturing and the aerospace industry is also highly desired.
Experience and familiarity with MS Office products required.
 
Job Number: 43152
Job Location: Huntsville, AL
Rate: $50.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Engineer

Description:
Propulsion Engineer

Job ID # 2020-11907

Contract Opportunity

Location: El Segundo, CA

Industry: Aerospace & Defense

Minimum Clearance: Top Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Define requirements for propulsion systems, auxiliary power systems and vehicle fuel and tank systems.
Define, coordinate, and control the functional and physical interfaces between the propulsion system and the vehicle.
Develop specifications and architectural and configuration concepts for associated vehicle systems to meet customer and regulatory requirements.
Configure or design propulsion sub-systems and components to meet all vehicle design and performance criteria.
Use various testing, analysis, modeling and simulation tools to estimate or calculate system performance.
Define and perform certification tests for propulsion sub-systems and components.
Support fielded systems to assure continued reliability.
Develop concepts for future propulsion systems to meet anticipated requirements.
Work under general direction.
What You’ll Need:

Top Secret Clearance
Background in spacecraft propulsion design.
Experience designing electric propulsion systems and sub-systems including thrusters, cathodes and/or feed systems.
Hands-on role for a highly collaborative individual that combines superb technical, and analytical capabilities to transition theoretical guidance and requirements into performant hardware optimized to be lightweight, cost effective and manufacturability.
Preferred Qualifications:
Advance degree (Master’s or PhD) in structural or mechanical engineering or related discipline
Experience designing spacecraft propulsion systems and/or sub-components.
Experienced with designing plasma propulsion systems (such as Hall Effect thrusters), cathodes and/or electric propulsion propellant feed systems.
Experienced designing custom test fixtures for propulsion applications
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Engineering, Computer Science, Mathematics, physics or chemistry combined with 5 + years of relevant work experience; or an equivalent combination of technical education and experience. ABET accreditation is the preferred, although not required, accreditation standard.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11907
Job Location: El Segundo, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Representative- Nashua, NH

Description:
We have an Excellent Contract position for a Senior Supplier Quality Engineer to join a leading Company located in the Nashua, NH area.
Job Responsibilities:
Implement tools and processes to ensure suppliers are prepared and have robust plans to meet product quality requirements fo program customers.
Investigate, evaluate, and resolve supplier quality problems by conducting audits, analyzing defect trends, and leading continuous improvement projects.
Conduct capability assessments that verify supplier qualifications travel to assigned suppliers and lead multiple projects to completion.
Utilize supplier Scorecards/metrics and analytical tools to quantify performance levels of individual suppliers and work with those suppliers to develop improvement plans to achieve quality performance goals.
Evaluate the impact of non-conforming products and assess suppliers' corrective action robustness in order to ensure strong and permanent countermeasures.
Champion problem solving and Root Cause analysis activities with suppliers to eliminate the recurrence of non-conformances and drive a 'Zero Defect' mentality within the supply base.
Perform Source Inspection of product at supplier locations.
Perform and Evaluate First Article Inspections per the requirements of AS9102 as well as train suppliers to meet expectations.
Basic Hiring Criteria: Bachelor’s Degree in Engineering or Technical field with 5+/10+ (depends on grade level) years of experience.
Experience in Avionics or Defense Electronics Prime Contract environment Working knowledge of AS9100 Quality System and AS9102B First Article Requirements Experience with electrical/mechanical inspections, product test, equipment, and instrumentation Working knowledge of supply chain logistics from raw material to finished goods including experience with Enterprise Resource Planning (ERP) system/Quality Management Software system.
Lean Six Sigma Greenbelt or Blackbelt.
 
Job Number: 42846
Job Location: Nashua, NH
Rate: $39.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Sheetmetal Technicians

Description:
PDS is seeking Structural Mechanics for open positions in Bridgeport, West Virginia.
 
In your role, you will:
  • Safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.
  • Troubleshoot, repair, inspect and perform maintenance on customer aircraft
  • Remove / install aircraft components as required
  • Fabricate and or modify structural modifications on aircraft parts
  • Perform minor structural repairs on composite components either attached or detached
  • Assist in conducting hidden damage inspection of aircraft structures
  • Assist with complex structural repairs either on or off aircraft
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment as required
  • Assist with aircraft component repair
  • Comply with environmental health / safety policies / procedures.  Participate in 5-S activities.  Perform work in a safe and timely manner.
  • Adhere to Company General Work Requirements (Factory, Shop and / or Hanger positions)


Education and Experience:
  • You have typically 2 + years structural sheet metal repair / modification experience or substantiated similar experience
  • You have sheet metal A/C Tech school or equivalent schooling
  • You have the ability to interpret and work with mechanical engineering drawings
  • You hold an A or A&P license (REQUIRED)
  • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  •  You have your own basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • You must obtain appropriate Ground Support Equipment Qualifications as required
  • You have the ability to work unscheduled overtime including nonscheduled work days and holidays
  • You have the ability to work in seasonal/inclement weather outside
  • You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
  • You have basic PC skills
  • You have experience on corporate jet aircraft / commercial aircraft 

 
Job Number: 2010115624
Job Location: Bridgeport, WV
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvH3QAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. SYSTEMS ENGINEER ( Torrance, CA ) 201883 - Direct Hire

Description:
SR. SYSTEMS ENGINEER ( Torrance, CA ) 201883 - Direct Hire
Direct Hire

Relocation Assistance Available

US Citizenship required

Sr. Systems Engineer for Aircraft Test Equipment, you’ll be a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex equipment used to test military and commercial aircraft control components. Most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.

To be considered for this position you’ll need the following:
Bachelor of Science degree in Electrical, Mechanical, Aerospace, or Systems Engineering, probably an advanced degree
10+ years of experience with requirements development, design, modelling, analysis, and integration of complex electro-hydraulic, electro-mechanical, or electro-pneumatic servo-mechanisms for mechanical and hydraulic test rigs
A proven record of successful development programs leading and working as a part of a project team
Experience in the areas of requirements definition, integration, V&V, modeling & simulation with project management
Project Engineering experience with budgets, schedules, lead projects required
Experience in off-the-shelf real-time systems such as dSPACE and National Instruments is a plus
 
Job Number: 201883
Job Location: Torrance, CA
Rate: Open
Per Diem: No
Overtime: No
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will take customer requirements for an aerospace fluid control component and create a viable design solution that can be carried through all phases such as design, development, testing and manufacturing. To be considered for this role, you will have a B.S. Degree in Mechanical or Industrial Engineering along with a minimum of five years of experience designing fluid control components like Valves, Regulators and Pressure Vessels.

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Design Engineer Job Responsibilities:
* Complete new projects from creation of proposals through development, qualification, and production support
* Determine feasibility of designs considering costs, time limitations, and technical factors
* Apply engineering principles to design, develop, or modify new or existing products
* Conduct analytical studies on engineering proposals to develop design for products
* Analyze test data and reports to determine if design meets functional and performance specifications
* Prepare or directs preparations of component layouts and detailed drawings
* Plans and develops experimental test programs
* Prevent or eliminate defects in new or existing products

Design Engineer Job Requirements:
* B.S. in Mechanical or Industrial Engineering or the technical equivalent
* Minimum of five years of hands-on experience designing fluid control components like Valves, Regulators and Pressure Vessels for the aerospace industry
* Experience with AutoCAD and SolidWorks software is a must
* Project engineering and communication skills
* Ability to perform in a fast paced, 'hands-on' environment
* An Advanced Degree is preferred
* Hands-on experience with software like ANSYS, MathCAD, Solid Works, Pro-E or equivalent is desired
* Understanding or Six Sigma/Lean Manufacturing techniques and methods is desired

If you are interested in this Design Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 303447
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Hydraulics Systems Modelling Engineer - China

Description:
Our Aerospace Client based in China is looking for additional engineering Support. They require a Landing Gear Senior Performance & Dynamics Engineer.


This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.


The Senior Performance & Dynamics Engineer will be involved in conducting performance and dynamic analysis for  mechanical, hydraulic and occasionally basic electrical systems as they relate to aircraft, hydraulic, landing gear, extension/retraction, brake and steering. This engineer is also required to support requirements definition, and validation, verification test activities and  assist with the development of methods and tools. Possessing in-depth knowledge of mechanical and hydraulic systems, this engineer will generate strategies as they relate to performance and dynamics activities on given programme(s).


Key aspects of this job include the following:

 

  • Build computational models and run simulations.
  • Calculate static and dynamic loads.
  • Conduction performance and frequency response analysis.
  • Conduct stability, shimmy, model analysis and failure case analysis.
  • Correlate and validate computational models.
  • Write and validate performance and dynamic requirements.
  • Define and document simulation cases and pass/fail criteria.
  • Optimise design solution in conjunction with other engineering disciplines.
  • Define test requirements and analyse and interpret test results.
  • Adherence to the programme schedules.


Skills/ Qualifications / Experience Sought:

 

  • Knowledge of landing gear systems / hydraulic systems.
  • Experience of dynamic analysis and computational modelling and simulation.
  • Experience of model correlation and validation.
  • Knowledge of airworthiness requirements and certification.
  • Basic knowledge of systems and electrical engineering.
  • Working knowledge of MATLAB/Simulink, ADAMS and AMESim.
  • Sufficient experience to write requirements.
  • Minimum 20 yrs of related working experience in related landing gear or hydraulics.
  • Had working experience with major airframers or major suppliers.
  • Fluent English, with good communication skills.

 
Job Number: BH-59-5
Job Location: Shanghai, China
Rate: Good Package - Negotiable
Per Diem: --
Overtime: --
Duration: 1-3 years duration
Start Date: 10/01/2020
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Engineer

Description:
Direct experience in direct FAA or Military aviation engineering. Experience should include some combination of aircraft repair, overhaul, modifications, and/or sustainment. Experience with aircraft loads analysis, static strength, stiffness, failure prediction, durability (fatigue) and thermal analysis. Experience with environmental testing per MIL-STD-810F. Experience with analysis methods to include industry standard finite element analysis. Experience with the application of industry standard design practices and processes to provide product definition and level III technical data packages. Working knowledge of mechanical systems and concepts.
 
Job Number: 48956
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Production Operator

Description:
Senior Production Operator

Job ID # 2020-11853

Contract Opportunity

Location: Scottsdale Arizona

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

 

What You’ll Do:

Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
Read and interpret basic schematics and drawings
Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
Integrate sub-assemblies into final hardware
Perform final assembly of small systems
Perform basic electrical tests
Perform more complex rework and refurbishment of hardware and systems
May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
May conduct manufacturing inspections on processing line in accordance to quality specifications
May be involved in packing, movement and protection of finished product
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Perform general fabrication and marking
Operate less complex equipment
Perform basic loading and configuring of customer/standard software on customer device
Perform basic inspection per documentation
Accurately completes process paperwork and entering data into the applicable work order management system
Support continuous improvement activities and participates in problem solving activities
Maintain a clean and orderly work area
Support safety/housekeeping standards
Contact are primarily within immediate work unit and direct supervisor
Normally follows established procedures on routine work with limited supervision, requires detailed instructions only on new assignments
What You’ll Need:

Clear manufacturing process skills
Clear knowledge of polarity and inspection criteria
Clear knowledge of Bills of Material (BOM)
Clear knowledge of applicable work order tracking Management systems
Clear communication skills, both written and verbal
Ability to work in team environment
Clear computer skills
Clear knowledge of measuring equipment and math
Ability to use various computer software applications to analyze and manage data
Ability to interpret basic documents, work instruction, and schematics
Ability to exhibit adaptability/flexibility
Ability to lift a minimum of 25 pounds
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 2 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11853
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Inspector

Description:
Senior Quality Inspector

Job ID # 2020-11869

Contract Opportunity

Location: Taunton Massachusetts

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

 

What You’ll Do:

Inspect parts and materials for compliance to specified requirements and perform real-time defect evaluation.
Preparation of QA documentation along with the verification of corrective action implementation and rework.
What You’ll Need:

strong communication skills to interface with coworkers and internal customers.
J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required
Distinct knowledge of material requirements, fabrication techniques, and manufacturability concepts
Experienced in the use of current strategic CAD tools; Pro-E/Creo or Solid Works preferred
Superior knowledge of the strategic CAD and file management tools and design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning & Tolerancing)
Solid understanding of simple mechanical stress; structural, thermal and tolerance analysis
Team player who thrives in collaborative environments and revels in team success
Exceptional problem-solving and communication skills
Open to new ideas and serve as a champion for change when directed from management
Commitment to ongoing professional development
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 2 + years of relevant work experience; Associate’s Degree in Electronics, Computer Science, Mechanical Engineering is preferred.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11869
Job Location: Taunton, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senor Structural Analyst - Dynamic Characteristics , Vibration - China.

Description:
Senor Structural Analyst - Dynamic Characteristics ,Vibration - China. Fixed Term Contract basis.


Our Aerospace Client in China requires additional support. for their current and future programs. They desire an Engineer or Specialist with strong experience In Structural Analysis, Dynamics and Vibration related to Aircraft Structures. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
 
  • Master of structural dynamical characteristic analysis software Nastran and  ANSYS.
  • Over 10 years working experience on Civil Aircraft vibration design.
  • Solid foundation on mechanical vibration.
  • Excellent communication in English.

Job Description:
  • Analyse structural modal and dynamic response, optimise structural dynamic characteristics.


Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.

 
Job Number: BH-305
Job Location: Shanghai, China
Rate: Good salary and benefits negotiable
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 10/01/2020
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Engineer - Flow induced Structural vibration response analysis - China

Description:
Specialist Engineer - Flow induced Structural vibration response analysis - China. Fixed Term Contract Basis, Full or Part Time.


Our Aerospace Client in China requires additional support for their current and future programs. They desire an Engineer or Specialist with strong experience In Flow induced Structural vibration response analysis. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.


Required Experience and Qualifications:
  • Master fluid solid coupling  analysis software(Ansys).
  • Over 10 years working experience on Civil Aircraft vibration and aerodynamic design.
  • Solid foundation in mechanical vibration and aerodynamics.
  • Good communication skills in English.


Job Description:
  • Knowledge of Flow induced Structural vibration problems of flight test analysis.
  • Analyse and optimise flow induced Structural vibration.
  • Test Planning of Flow induced Structural vibration.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-309
Job Location: Shanghai, China
Rate: Good Salary and Benefits - Negotiable
Per Diem: --
Overtime: --
Duration: 1- 3 years
Start Date: 10/01/2020
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Reliability Engineer

Description:
A Sr Reliability Engineer job in Tempe, AZ is currently available through Belcan. The associate at this level is a seasoned professional capable of supporting a heavy, self-managed workload of multiple projects with a high level of quality and creativity. Acts as a team mentor to less experienced engineers as well as an expert department resource in reliability techniques and engineering problem solving processes. This individual has a proven track record of solving complex technical problems and understands the mechanisms involved in successfully executing solutions within different system.

Job Duties:
* Independently defines test requirements for complete hardware, fasteners and electromechanical systems, products or product families of large scope for products ranging from simple products to complex systems to satisfy customer requirements. Organizes design plan and technical strategy to assure successful execution.
* Helps to create preventative maintenance programs and schedules based on reliability modeling and test data results .
* Provides technical and reliability focused leadership for project teams. Project focused efforts to ensure that technical solutions are delivered to support overall project needs. May mentor junior engineers.
* Practices and teaches others in the use of stage gate development methods, engineering tools, and the understanding of all relevant industry standards. Utilizes knowledge and expertise on industry standards and regulatory requirements to lead and teach team in this area.
* Reviews team test plans and test procedures ensuring accuracy and completeness. Directs personnel in fabrication of test equipment, and develops methods and procedures for testing products or systems.
* Proactively investigates and solves problems that affect scrap, warranty/reliability and product cost for new and/or existing products.
* Predicts test performance based on sound engineering practices and analyzes test data for accuracy ensuring that test reports clearly communicate results.
* Understands and executes robust, data driven reliability modeling techniques that provide the required direction to the design teams as part of new product development efforts.
* Manages the test lab and the work of reliability testers including the ongoing upkeep, calibration and maintenance of all test equipment. Instrumental in helping to define and procure new test equipment as required.



Qualifications:
* BS or BA in Mechanical Engineering or related engineering discipline and 7-9 years in a related field
* Solid working knowledge of testing requirements for fasteners, hardware and electromechanical devices
* Advanced understanding of accelerated life testing (ALT) methodology, including mechanical, cycle, and environmental stress induction, and how to apply to product test practices.
* Strong experience with stage-gate development processes, leading technical tasks such as safety assessments, FMEA, and regulatory compliance efforts including experience with CSA or UL certification efforts
* Experience handling highly complex engineering issues and problems, and referring only the most complex issues to higher-level staff.
* Possesses strong working knowledge of engineering principles related to the position. Has continuously applied engineering principles in practice and teaches others in most of the topics related to the responsibility
* Must possess leadership, coaching, and/or mentoring skills through proven experience. May possess supervisory experience.



If you are interested in the Sr Reliability Engineer job in Tempe, AZ, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 305995
Job Location: Tempe, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Equipment Maintenance Tech

Description:
Under minimal supervision provides advanced experience with respect to electrical, hydraulic, mechanical, and pneumatic systems for troubleshooting, repairs, upgrades and preventative maintenance to all aircraft related production equipment.

Notes:
This opening is in Tulsa, OK and will be a 2nd shift opening

Unique Skills:
• Required As an Equipment Maintenance Technician you will be responsible for supporting our campus facilities' electrical and mechanical equipment needs.

Qualified candidates will have the following experience:
• Must have excellent computer skills and familiar utilizing CMMS Systems for work order management.
• Strong electrical and mechanical skills preferred.
• Knowledge of Programmable Logic Controllers (Allen Bradley & Siemens Controls preferred).
• Knowledge of CNC Equipment (Mazak, Mori Seiki, Fryer, Alpha Harrison, Broetje, Kuka preferred).
• Knowledge of GSE Equipment (Hobart, Unitron, Tronair, Lektro Tug preferred).

Education and Experience Requirements:
• High School Diploma or GED required.
• 5 years experience working with electrical controls and mechanical applications in a manufacturing environment, to include experience working with aircraft related production, equipment in the aerospace industry. 2 year technical degree may offset one year of experience.

Essential Functions:
• Diagnoses cause of electrical and mechanical malfunction or failure of operational equipment and apply corrective action to resolve re-occurring issues.
• Proactively conducts Preventive and Predictive Maintenance inspections and performs required. duties in accordance with recommended schedules.
• Performs repairs and corrective maintenance to equipment with a high degree of quality and reliability so that the equipment is capable of operating within the required. Specifications
• Performs setup and calibrations on scheduled intervals for all aircraft related production equipment.
• Regularly performs backups of process parameters and PLC programs for all equipment.
• Daily input of required. data in CMMS system for machine reliability and control.
• Ability to implement project objectives on key pieces of automated equipment with minimal guidance.
• Recommends or initiates modification or replacement of equipment components which fails to meet acceptable operating standards.
• Submits parts request on critical spares identified as non- stock items.
• Ability to work any shift.
• Demonstrated working knowledge of electrical, mechanical, and controls aspects of factory automation systems and the integration of devices used.
• Working knowledge of replacing spindles, ball screws, linear guide ways, bearings, hydraulics repairs, and precision machine alignments (Laser Alignment experience a plus).
• Experience in the alignment of turrets and the installation of ball screws is a plus.
• Working knowledge of PC based Microsoft office. Experience with computerized maintenance management software relevant to spare parts management, work order creation, and Preventive Maintenance preferred.
 
Job Number: 24-443
Job Location: Tulsa, OK
Rate: $26 - $29/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Sami
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
A Sr. Manufacturing Engineer job in Marion, VA is currently available through Belcan. In this role, you will be responsible for providing engineering support to all aspects of the Tactical Shelters product line from design and development through start-up, production, integration and test. To be considered for this role, you will have a Bachelor's degree in Manufacturing or Industrial Engineering, or a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Manufacturing Engineer Job duties:

* Provides hands on engineering support to manufacturing/operations in the manufacture of tactical shelters.
* Develops manufacturing BOMs, workflow routers and work instructions for new designs and build to print projects.
* Develops tooling approaches and coordinates tool design and fabrication efforts for new product builds.
* Analyzes and develops processes for manufacturing tolerance control.
* Supports design and development of military tactical shelters covering such areas as detail fabrication, adhesive bonded sandwich panels, mechanical assembly and basic lighting and power systems.

Qualifications:

* Bachelor's degree in Manufacturing or Industrial Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.
* Has mechanical aptitude and strong analytical ability to resolve technical issues, develop new products and develop creative and innovative ideas and solutions.
* Experience and working knowledge of mechanical assembly, welding of thin walled aluminum, aluminum sheet metal fabrication, CNC machining, chemical processes, aluminum skin/honeycomb sandwich panel bonding and painting materials and processes.
* Experience analyzing and developing processes for manufacturing tolerance control.

If you are interested in this Sr. Manufacturing Engineer job in Marion, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 305939
Job Location: Marion, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 01/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
We are seeking a Structural Engineer with a Bachelor's degree in Structural, Stress, or a related Engineering field and at least 6 years of relevant experience. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies

As a Structural Engineer, you will be using your skills and expertise to analyze, research, and develop our complex structural engineering specifications involving structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment, and maintenance designs. You'll be responsible for analyzing damage tolerance, durability, producibility, cost, dynamics, loads, stability and stress fatigue, thermal analysis, and safety. You'll recommend design approaches to meet our production requirements for new or improved products or processes.

Must-haves:
• Bachelor's degree in Structural, Stress, or related Engineering discipline and at least 6 years of relevant experience
• Strong classical analysis techniques.
• FEMAP FEA experience.
• Experienced in FEMAP, Nastran, Patran and classic hand calcs.



Preferred:
• Experience with Femap/Nastran
• Aviation integration experience, system integration tied to aircraft
• Airbus experience.
• Aircraft configuration management
• Experience with airworthiness requirements including Mil-hdbk-516 and FAR 25 requirements
• Aircraft subsystem design background
• Architectural development experience and configuration design skills
• Prefer experience in Airbus primary structure and post production mods with limited data.


The Structures Company is an AA/EOE.
 
Job Number: 427
Job Location: KS
Rate: $60-$70/Hr., **DOE**
Per Diem: Possible
Overtime: No
Duration: 10 Months, Possible extension
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Stress Engineer

Description:
PDS Tech is seeking a Stress Engineer in St. Louis, MO

Actively collecting and screening resumes for upcoming needs. 

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

  • The Stress (Analysis) Engineer will develop, analyze, design and establish test procedures for aero-structure products and airframe structure for a variety of internal and external customers
  • Design and analyze details of mechanically fastened and bonded joints for both composite and metallic airframe structures.
  • Support the design and development of 3D CATIA datasets and/or 2D drawings
  • Integrate technical, cost, value, and safety considerations into the product definition to comply with customer, regulatory and company requirements and document results in drawings, datasets, reports specifications and supporting data
  • Interface with other members of project or program team, management and manufacturing staff to develop producible products that reduce process times, rework, and scrap
  • Interface with customers and suppliers to achieve cost effective, technically sound and functionally superior product.

Basic Qualifications:



  • Bachelor’s degree in Engineering from an ABET accredited program.
  • 8+ years metals and/or composite analysis experience in an aero-structure design/manufacturing environment.
  • Strong computer skills with knowledge of Microsoft Office products.   Experience with CATIA V4/V5 a plus.
  • Experience with FEM (Finite Element Method) packages which includes Nastran / Patran and /or other packages such as ANSYS.   
  • Experience with hand calculations and template use/applications
  • Willingness to travel in support of the development effort


Preferred Qualifications:



  • Composites and Metallic experience 
  • PATRAN and/or NASTRAN
  • Previous Large Aircraft or Fighter Jet experience is a plus. 

Required: 

  • An active Secret Clearance is required.  
  • Must be a US citizen able to hold secret level security clearance. 
  • Bachelor’s degree in Engineering from an ABET accredited program.

 
Job Number: 2010114672
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OrplQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
A Structural Analyst job in Kent, WA is currently available through Belcan with one of our Aerospace clients. You will be responsible for structural loads, dynamics and analysis of vehicles which will land people and payloads on the Moon. You will also perform finite element analysis at the vehicle and component levels, design optimization, structural testing, and verification. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Aerospace or Civil Engineering. This is a great contract opportunity with a great company.

Structural Analyst Job duties:

* Analysis of primary and secondary spacecraft structures
* Integration of structural analysis with loads and dynamics environments
* Finite Element Model development, refinement, validation, and correlation to tests
* Strength checks and analysis report generation
* Test and verification plan and report generation
* Support configuration development and trade studies

Qualifications:

* Minimum of a B.S. degree in Mechanical, Aerospace or Civil engineering
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* 7+ years of experience with aircraft, spacecraft, launch vehicle, or automotive in some of the following areas: External loads; Vibro-acoustic analysis; Analysis using Nastran, Ansys, Abaqus, LS-Dyna, or Optistruct
* Vehicle load path definition and strength analysis desired
* Analysis of metallic and/or composite structures (skin-stringer, fittings, sandwich panels, etc.)
* Composite design and analysis skills in any thermoset, thermoplastic, metal matrix and ceramic matrix composites
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Structural Analyst job in Kent, WA, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 305517
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Currently reviewing and collecting resumes for anticipated upcoming needs. 

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 2010113357
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 03/05/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002frFRQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - Freighter Conversions Experience

Description:
The structural design engineer performs detail design on commercial aircraft primary airframe for passenger to freighter modification. The engineer will be responsible for creating design data in support of structural modifications to aircraft primary structure for the modification of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS : Detail design of aircraft primary or secondary structures for passenger to freighter modification. Designs structural modifications and structural provisions. Designs repairs for aircraft structure that are beyond the scope of repair documentation. Supports the integration of structural and systems installation components within the aircraft configuration. Create moderate to complex design of aircraft primary or secondary structures to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools. Ensures designs meet customer criteria, quality standards and FAA requirements.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC: Bachelor Degree in Aerospace or Mechanical Engineering or the equivalent is preferred. 10 years of experience working in aircraft design and extensive experience with aircraft modification projects.

REQUIRED SKILLS AND ABILITIES: Experience with Catia V5 required. Aviation background and aircraft modification experience required. Knowledge of mechanical design and documentation standards.




The Structures Company is an AA/EOE.
 
Job Number: 428
Job Location: KS
Rate: $55-$60/Hr. **DOE**
Per Diem: Possible
Overtime: No
Duration: 10+ Months, Possibly longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer II

Description:
A Structural Engineer II job in Englewood, CO is currently available through Belcan with one of our Aerospace/Defense clients. You will be using your skills and expertise to design, evaluate, and certify cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 3 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance required

Structural Engineer II Job duties:

* Examine complex metallic and composite structures and systems
* Familiarity with aircraft structure/construction
* Familiarity with industry standard analytical methods (Niu, Bruhn, etc.)
* Experience in both classical structural analysis and finite element analysis of metallic and composite aircraft primary and secondary structure
* Ability to prioritize workloads and show flexibility to changing situations / demands
* Ability to communicate with all levels of management, customers, and individual contributors

Qualifications:

* Bachelors of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and 3 or more years of relevant experience
* Demonstrate working knowledge of regulatory and applicable airworthiness criteria including Mil-hdbk-516C and/or 14 CFR Part 25 and Part 23
* Knowledge and experience of aircraft modification programs
* Experience in damage tolerance analysis of metallic aircraft structure
* Experience with MSC Patran/Nastran or Siemens Femap/NX Nastran
* Solidworks and/or CATIA experience. Understands Product Lifecycle Management
* Experience in Structural Dynamics/Vibration analysis
* Experience with narrow body transport category aircraft
* Experienced in execution of government contracts
* Experience in integrating mission systems across a wide variety of primary/secondary structure
* Experience in VBA programming

If you are interested in this Structural Engineer II job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 305460
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Loads and Dynamics Analyst

Description:
A Structural Loads and Dynamics Analyst job in Kent, WA is currently available through Belcan with one of our Aerospace clients. You will be responsible for structural loads, dynamics and analysis of vehicles which will land people and payloads on the Moon. You will also perform finite element analysis, structural dynamics analysis, forcing function development and implementation and validation and general loads creation. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Aerospace or Civil Engineering. This is a great contract opportunity with a great company.

Structural Loads and Dynamics Analyst Job duties:

* Finite Element Model development, refinement, validation, and correlation to tests
* Rigid and flexible body dynamics
* Modeling, simulation, and verification of spacecraft launch, docking, and landing events
* Acceleration, shock, and vibration measurement and data interpretation of ground and flight tests
* General loads development for spacecraft and related ground systems
* Support configuration development and trade studies
Qualifications:

* Minimum of a B.S. degree in mechanical, aerospace or civil engineering
* 3+ years of experience in the prediction/validation of low and/or high frequency structural dynamics and loads, in addition to finite element modeling
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* Spacecraft and launch vehicle load development/validation experience preferred
* Hyperworks, NASTRAN and Matlab proficiency desired
* LS-Dyna proficiency desired
* Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Structural Loads and Dynamics Analyst job in Kent, WA, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 305516
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 11/17/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sustainment / Test Engineer

Description:
Inconen is looking for a Sustainment / Test Engineer for our client, a well-known Aerospace Company, in Brea, CA.

Job Summary:
1. Manage complex projects in development, coordination and conducting of technical reliability studies and understands and can develop and analyze, reliability test plans.
2. Understands how to analyze reliability field data Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
3. Compilation and analysis of performance reports.

Job Description:
1. The position is for a Sustainment - Test Engineer to lead our Engineering Supply Chain Projects.
2. In this role, you will lead the planning and execution of supply chain work transfer projects and assist suppliers in manufacturing systems, parts and assemblies or supplier parts.
3. You will also work on multiple work transfer projects with suppliers to establish the requirements, quality standards and adopt most efficient techniques to support manufacture parts to print that ensure quality.
4. You will conduct the project planning, test planning, test procedure/report development and execution efforts to meet the goals of work transfer projects.
5. You will be an active participant in the Company Supply Chain transformation.
6. This position is based at our clients site in Brea, CA.
7. Lead over all planning and execution of work transfer activities to support projects aimed at cost savings and solving current/future production issues.
8. Support the fabrication of complex machined parts and sub-assemblies by providing technical expertise and support for suppliers.
9. Experience with component testing, FEA, Stress analysis & Material properties.
10. Expertise with component level DFMEA - PFMEA for Aerospace parts.
11. Develop Test plans and procedures to verify and validate the parts meet design specifications and requirements.
12. Conduct Engineering analysis and testing to confirm design meets requirements.
13. Prepare part risk assessments and conduct them with the suppliers.
14. Review manufacturing processes to insure they will yield parts compliant to engineering drawings and specifications.
15. Coordinate with various departments and team members to understand design intent and communicate to the suppliers.
16. Review suppliers manufacturing capabilities.
17. Assist suppliers in clarifying requirements, resolving problems related to the manufacture of parts.
18. Review product design specifications and provide technical guidance to suppliers.

Required Qualifications:
1. Bachelor’s Degree in Mechanical Engineering AND 7+ years of Sustainment/ Test Engineering experience.
2. Strong test planning background, analytical skills, able to infer engineering schematics and communicate design intent.
3. Expertise developing test plans, procedure and reports.
4. Must have experience testing prototype, pilot and production parts.
5. Experience developing plans and conducting Qualification by Test, Qualification by simulation OR Qualification by Analysis as required.
6. Experience in a Supply Chain Manufacturing/Sustainment Engineering role leading work transfer projects is a plus.
7. Outstanding communication skills - both written and verbal / organizational skills, and be able to demonstrate an ability to understand complex design schematics/procedures
8. Experience in the aerospace industry.
9. Excellent collaborative, interpersonal and presentation skills, ability to influence.
 
Job Number: 12587
Job Location: Brea, CA
Rate: $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Job Description

The Sr. Systems Engineer will perform system analysis, contribute to system design, generate required documentation, and either perform or coordinate testing of complex UGV systems. To be successful in this role, the individual should possess sufficient technical depth to perform deep-dive analysis and apply properly tailored Systems Engineering process, as well as technical breadth to work through complex issues across disciplines (e.g. mechanical, electrical, software, and firmware).

Applies broad technical knowledge and skills in multiple technical/scientific disciplines to the analysis, specification, planning, development, design, integration, testing, and production of UGV systems
Applies formal systems engineering best practices and processes
Prepares systems engineering cost estimates, project schedules, and CDRL items
Responsible for execution of the systems engineering content on multiple projects
Leads system level hardware and software integration, and verifies the operation of subsystems and systems
Manages system interfaces, requirements, and design constraints
Investigates and resolves system level issues
Provides technical expertise in planning for next generation initiatives

Required Experience
Bachelor’s Degree in engineering or science from an accredited college or university
6+ years of relevant systems engineering experience on electromechanical systems with embedded software and firmware
Accomplished in engineering or scientific domain of expertise
Experience working effectively in cross-functional teams in a product development environment
Strong written and verbal communication and organizational skills
Fluent in multiple relevant technical/scientific domains and can work through complex issues across engineering disciplines
Proficient with MS Windows OS and MS Office applications
Must be a US person
 
Job Number: 48889
Job Location: Lowell, MA
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineers - Flight Controls/Landing

Description:
Experience with Flight Controls, Hydraulics, Landing Gear, and Environmental Systems system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 Enovia is preferred.
• Experience with Microsoft Office Word, Excel, PowerPoint is a plus
• Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.
 
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineers - Flight Controls/Landing Gear/Hydraulics

Description:
Must be Degreed

Experience with Flight Controls, Hydraulics, Landing Gear, and Environmental Systems system design to the requirements of CFR 14 Part 25 is desired.


• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 Enovia is preferred.
• Experience with Microsoft Office Word, Excel, PowerPoint is a plus
• Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)

Email resume to: mmccarthy@pdstech.com
 
Job Number: Systems-Tex-KS
Job Location: Wichita, KS
Rate: $60.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Job Title: Test Engineer - Hypersonics

Position Description of Test Engineer:
The successful candidate will serve as a Test Engineer that will conduct electrical and environmental testing efforts.
Specific duties include development of test procedures utilizing electrical/mechanical test equipment, conducting test in the production of Hypersonic Glide Bodies (HGB), analyzing test results, and documenting results in test reports.
The candidate will be part of a test team whose work will include testing of electronic/avionic components, requirements development and review, electrical circuit testing, hardware-in-the-loop (HWIL) testing, integration assembly and testing of HBG, configuration of test equipment, subsystem testing and troubleshooting.
Work will be conducted in an integration/production facility along with a laboratory environment.

Basic Qualifications of Test Engineer:
A Bachelor’s degree in Electrical Engineering from an ABET accredited school is required.
Candidate should have at least 3+ years of relevant experience.
Experience testing electronic boards at the assembly level
Experience writing test procedures.
Benchtop testing of components
Integration testing of avionics and sub-assemblies
Functionality testing
Organizational skills to document test procedures, test reports and support configuration management of the test equipment

Candidate must be a resident of the North Alabama area or willing to relocate to the Huntsville - North Alabama, AL area.

Other Qualifications of Test Engineer:

US Citizen and possess (and be able to maintain) a Final Secret Clearance or meet the eligibility to obtain (and maintain) a Secret Clearance.
 
Job Number: 9150
Job Location: Huntsville, AL
Rate: 70 HR
Per Diem: 0
Overtime: YES
Duration: 6 MO C2H
Start Date: NOW
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Andrew Hall
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician

Description:
Test Technician

Job ID # 2020-11896

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

 

What You’ll Do:

Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
Work from schematics, engineering drawings and written or verbal instructions.
Operate related equipment; conducts tests and reports data in prescribed format.
Perform calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
What You’ll Need:

Ability to Obtain Secret Clearance
Candidates must be flexible to work OT during the week and weekend if necessary.
Candidates must have experience computer using Microsoft office products (Outlook and Word) and ability to use other computer based programs.
Software Skills:
MS Excel
MS Word
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11896
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Engineer - Space flight vehicle - California

Description:
Thermal Engineer

**Qualifications:
- Design, analysis and integration experience of spacecraft thermal systems.
- Experience using thermal analysis tools (Thermal Desktop, SINDA/G, SINDA/FLUENT, TSS).
- Experience using aerospace standard design tools (CREO, NX, CATIA).
- Masters Degree in Mechanical or Aerospace Engineering.
- Experience with space vehicle thermal design and/or integration.
- Detail-oriented and have excellent verbal and written communications skills, leadership skills, and organization skills
- Experience working on thermal design and troubleshooting efforts.
 
Job Number: C6589
Job Location: Santa Barbara, CA
Rate: OPEN RATE
Per Diem: YES
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
UG NX Designer - (CAD-UG NX11)

Description:
Looking for NX degreed and non degreed Mechanical Engineers and Designers. Must be skilled in the creation of model centric models and drawings utilizing UG NX 11. Creo 4 is a plus.
 
Job Number: PL NX
Job Location: PA
Rate: $42/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Umbilical Systems Designer

Description:
An Umbilical Systems Designer job in Kent, WA is currently available through Belcan. In this role, you will be responsible for working with the Umbilical team to design, develop, and test the umbilical systems between the ground, first, and second stages. To be considered for this role, you will have a Minimum of a B.S. degree in mechanical or aerospace engineering, and 6+ years of experience with launch vehicle, aircraft, or spacecraft fluid or mechanical systems.


Umbilical Systems Designer Job duties:

* Engage in all levels of the entire design cycle of umbilical systems including conceptual design from requirements, system performance modeling, system layout and structural analysis, manufacturing and integration support, test definition and mission support
* System synthesis from initial sizing and performance calculations to full system 1-D thermo-fluid analysis and CFD as required
* Documentation of engineering deliverables including interfaces, drawings per ASME Y14.5, FEA, and other analysis
* Component level testing by coordinating test plans, procedures, fixtures, test execution, and data analysis
* Pressurized system analysis using hand calculations and FEA

Qualifications:

* Experience in 3D CAD programs (Creo Pro/E and Pro/E Piping preferred) and GD&T
* Experience in the use of FEA analysis tools (ANSYS preferred)
* Experience with pressurized system or component design
* Working knowledge of fabrication, integration processes, and quality control techniques relative to tubes and machined components
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

If you are interested in this Umbilical Systems Designer job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 306153
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: BELCAN TECHSERVICES
Attention: AngelaLoza
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Welder/Assembler-1st shift

Description:
This position performs the welding function and prepares machinery for machining, paint and assembly functions. Possesses knowledge of pipefitting/welding/mechanical and light electrical work.

ESSENTIAL DUTIES:


l) Qualifies to company set welding procedures as written and as tested by external sources.

  1. Welds metal parts together according to detail drawings, using G.M.A.W. equipment, G.T.A.W., S.M.A.W. or oxyacetylene. Repairs parts. Performs flame-cutting operations and grinding.
  2. Lays out metal stock, sets up and assembles parts using jigs and fixtures. Sets up and operates sheet metal fabrication and forming machine, to produce parts in accordance with specifications.
  3. Must keep current certification as it pertains to welding operations.
  4. Responsible to select, cut, thread, bend and install piping, fittings, aperture fixtures, valves, gauges, meters, etc. in accordance with requirements and standard practices.
  5. Possesses knowledge of all processes and equipment to advise and assist employees in assembling, testing, and troubleshooting machinery. Organizes work to provide for optimal production efficiencies.
  6. Coordinates with Engineering to ensure Engineering Change Requests are submitted.
  7. Ensures that Engineering Change Notices are processed and assembled.
  8. Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in-house testing of machinery.
  9. Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation, (i.e., drawing, checklist, etc.).

Completion of a vocational diploma in welding, or equivalent training, and/or two years experience. Requires the knowledge of welding and cutting equipment in the Fabrication Department in accordance with specifications from blueprints. Previous pipe welding experience is preferred. Must possess skills in G.T.A.W., and be willing to complete the qualification process. Must demonstrate proficiency in pipe welding with G.T.A.W.



Mon-Fri 6:00am to 2:30pm




     
    Job Number: 2010114491
    Job Location: Appleton, WI
    Duration: 12 months
    Input Date: 11/14/2020
    Last Updated: 03/05/2021
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Kate Burby
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OqdeQAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    mechanical engineers and designers/creo

    Description:
    opening in az. ca.fl.mi.wa.pa.ma.nh.tn.tx. looking for degreed and non degreed engineers and designers for openings in all areas of engineering.
     
    Job Number: 626
    Job Location: several locations
    Per Diem: split
    Overtime: possible
    Duration: Lt
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: ADVANCED TECHNOLOGY
    Attention: susan e clark
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    Back to Advanced Job Search