Job Search Results

455 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/12/02 Wednesday 01:06PM Pacific Time by ContractJobHunter. )

Listings 1 - 455

Go To My Job Tracker

Expand all descriptions

Aero Logistics Engineer

Description:
Aero Logistics Engineer focuses on the analysis and technical coordination to develop affordable and supportable military systems.

The position is responsible for supporting the development of support systems within the IPTs to include Level of Repair Analysis(LORA), Reliability Centered Maintenance (RCM), Failure Mode Effect & Critical Analysis (FMECA), Provisioning/Supply Support, Task/Maintenance Plan Analysis, Interactive Electronic Technical Manuals (IETM), Paper-based manuals, Illustrated Parts Breakdowns (IPB), Support Equipment, PHS&T, and Repair Parts and Special Tool List (RPSTLs), and Industry MIL-STD documents and manuals, which span across multiple aircraft platforms, modifications, and development programs.

This position focuses on the design of inherent supportability into the analysis and the associated design, analysis and optimization of the customers' military support system.



Position Responsibilities:

1. Demonstrates a working knowledge and the requisite skill sets to work within the IPT/organization

2. Performs all assigned tasks to an acceptable quality standard with minimal supervision.

3. Compliant to company processes, procedures, and applicable government regulations.

4. Support and assist in data preparation and presentation for program reviews and perform other work as directed.

5. Perform to a set of performance metrics and measurements that give visibility to cost and schedule objectives.

6. Performs other duties as required. Education Requirements: High School diploma or equivalent. Bachelor's Degree is preferred.

Experience in Military logistics and/or experience in aviation logistics preferred.

Must have strong analytical skills.

Must be experienced with the Microsoft software suite.

Must have excellent communication skills.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 59497
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: Jan 2021
Input Date: 12/02/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: bnorman@butler.com
Website: www.butler.com

Aerospace Instrumentation Lab Technician, Fort Worth, TX

Description:
Aerospace Instrumentation Lab Technician, Fort Worth, TX
JR-018955

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Instrumentation Lab Technician (Aerospace Rotorcraft)

You Will :

• Report to the onsite Engineering Manager
• The Instrumentation Laboratory Technician is responsible for setting up, operation and maintenance of specialized instrumentation data acquisition systems.
• This includes the use of simple electronics equipment including ohmmeter and voltmeter. This includes wiring and soldering connections.
• He/she must possess technical skills for troubleshooting, maintenance and limited repair of low power DC circuits.
• Work on both metallic and Composite parts/ assemblies to fix strain gages and wiring for data collection
• There may be travel requirements for off-site testing which can last up to 8 weeks at a time. Also, candidate should
• Can work second shift if necessary.

You Will Need:
• Ability to solder and build cables, with knowledge of various connector types.
• Very good knowledge of strain gages, fixing them on surfaces such as Composite structures, metallic structures and pipes etc.
• Self-starter with demonstrated ability to work successfully in a team environment with customers and other disciplines
• Proficient to read and understand wiring diagrams for small project assembly
• Able to read and understand mechanical drawings
• Microsoft software suite applications such as Excel, Word, PowerPoint
• Good communication skills – oral and written.
• Physical strength -ability to lift up to 75 lbs , climb and work for extend periods in confined areas

Education: Associate Degree in Electrical / Electronics / Science / Mech. engineering (preferred), High School Diploma (required)

Years of Experience: Industry: Instrumentation / strain gage Installation / aerospace :5+ yrs
Required

Citizenship: US citizen

Skills & Experience
Soldering, Strain Gauging, Wire Harness Fabrication
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.


https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Instrumentation-Lab-Technician_JR-018955
 
Job Number: JR-018955
Job Location: Fort Worth, TX
Input Date: 12/01/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Email: elizabeth.stoddard@cyient.com
Website: www.cyient.com

Aerospace Senior Composites Materials Test Engineer, Fort Worth, TX

Description:
Sr. Non-Metallic Materials Test-Engineer, Fort Worth, TX

JR-019392

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.



You Will:


You will report to the onsite Engineering Manager. You will perform different Test Engineering tasks to support development, production, and use of advanced engineered composite materials on advanced aerospace vehicles for military, commercial, and innovation application.


You Will:


• Demonstrate advanced knowledge of materials, processes and the controlling specifications.
• Have experience in Composite Materials and processes.
• Have experience in bonding techniques, both metallic and composites.
• Demonstrate advanced skills related to drawing review and interpretation using CAD/CAM software
• Demonstrate advanced skills in using computerized drawing management system (ENOVIA)
• Write wide range of technical reports (IOMs, Test Requests, Destructive Test, Bonding Lab and Material Characterization Reports)
• Demonstrate expertise in Composites testing using Testing machine frames such as MTS or Instron.
• Demonstrate experience in Testing & evaluation of properties of composites by testing specimens in Compression, Tension, 3 - point bend testing, Three- and four-point flexure testing, Tensile testing of isotropic and orthotropic non-unidirectional fiber composites, Design Features laminate testing, Tensile testing of unidirectional carbon fiber reinforced composites, Testing laminates for in-plane shear response of polymer matrix composite materials, lap shear strengths of adhesive bonded single-lap-joints and double -lap joints, Testing of honeycomb sandwich constructed panels,
• Design test specimens for features testing, with discussions of design engineers, such as riveted joint specimens, Holed / notched specimens,
• Program machines (hydraulic or electrical Test frames) for software modifications of Test templates / creating new templates / new test processes. Keeping the OEM software updates and ensuring the upload’s performance. Statistical methods and materials
• Calibration of test machines / and troubleshooting /
• Well versed with test methods such as :
• ASTM D2344; ASTM D3039; ASTM D3410; ASTM D3518; ASTM D6641
• EN 2377; EN 2561; EN 2597; EN 6031
• ISO 14126; ISO 14129; ISO 14130; ISO 527-4; ISO 527-5
• Review and revise material and process coordinating with vendors to resolve issues.
• Provide recommendations to `wider range of shop production problems, coordinating directly with manufacturing and quality personnel.
• Gain familiarity with mechanical test equipment and learn to conduct simple static tests.
• Work with lab technicians to manage more complex test programs.
• Develop proficiency with vendor audits to conducts audits unsupervised, coordinating with Supplier Product and Quality personnel.
• Familiar with DMA test process.




You'll Need:


• Knowledge of Composites Materials and industry test standards for aerospace materials – SAE, ASTM , MIL Standards etc.
• Experience of Test machines – MTS required
• CATIA V5 or CATIA V6, ENOVIA
• MS Office, Word, Excel, Powerpoint, Outlook


Education: BS Mechanical Engineering or Aerospace Engineering - Required. (MS Mechanical Engineering or Aerospace Engineering preferred)


Experience : 10 years’ experience in an aerospace environment ( with non-metallic material lab environment preferred)


Citizenship: US citizen


Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019392
Job Location: Fort Worth, TX
Input Date: 12/01/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Email: elizabeth.stoddard@cyient.com
Website: www.cyient.com

Aerospace Technical Project Engineer

Description:
The project engineer is responsible for project estimating, planning, scheduling, cost tracking, and resource allocation. The successful candidate will have the ability to effectively drive a technical team through the appropriate mix of accountability and influence.

REQUIRED SKILLS:
Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
Aerospace full life cycle product development experience
Control Systems familiarity
Propulsion Engine familiarity
Scope Management experience
Work Breakdown Structure (WBS) familiarity
Earned Value Management (EVM) familiariy
Project Estimating experience
Project Planning experience
Experience Tracking Tasks in Accordance to Schedule
Experience Driving Tasks to Meet Milestones
MS Project experience
Ability to drive teams to success
Effective communication skills (both verbal and written)
Self-motivated, accountable, detail-oriented

PREFERRED:
Control Systems familiarity
Engine LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 11/18/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Email: rtc-talentmgmt@real-time-consulting.com
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Warehouse Associate

Description:
A Warehouse & Logistics Associate job is currently available at Belcan in Trumbull, CT. This is a long-term contract job; full time, first shift 9/80 hours. Great matching candidates will have a high school diploma and one to five years of work experience in a warehouse setting; ideally within the aerospace industry. You will be supporting a variety of tasks around the plant, yard and worksite.

Warehouse & Logistics Associate job duties:
* Load, unload, and convey materials within or near plant, yard, and work site.
* Perform manual and clerical shipping and/or receiving duties which may require the use of hand trucks, forklifts, and other devices, as well as a computer to maintain data.
* Verifies quantity, weight, and conformance of materials; prepare records of materials shipped and bill of ladings; route materials to destinations.
* Lay out, fabricate and assemble nonstandard shipping crates and boxes, and prepare parts and tooling for special shipment.

Qualifications:
* High School Diploma or Equivalent.
* Ability to lift heavy objects and be on feet for extended periods.
* Ability to use and learn computer software, including Microsoft Office.
* Legal authorization to work in the US required.
Desired but not required skills:
* Aerospace industry experience.

If you are interested in this Warehouse & Logistics Associate job in Trumbull, CT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 302118
Job Location: Trumbull, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: AbigailDeBiase
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Computerised - AFM Design Specialist

Description:
Aircraft Computerised - AFM Design Specialist -  China - Fixed Term Contract Basis.



Our Aerospace Client in China requires additional support. for their current and future programs. They desire an Engineer or Specialist with strong experience In Computerised AFM Design. This is an exciting opportunity to work with our client and to significantly contribute towards the success of their existing and new aircraft programs.



Required Experience and Qualifications:
 
  • Proficient in transport category aircraft performance algorithm design and aircraft performance software development, experienced in DO-178 B/C guided avionics software systems development and corresponding airworthiness activities.  
Experience:

  • 10 years or above Required.

Preferred:

 
  • Participated in the development of the Computerized-AFM development and corresponding airworthiness experiences.
  • Expertise on aircraft performance algorithms, aircraft performance software development, and the Computerized-AFM or other avionics software technical airworthiness planning and verification support.
  • Equipped with abundant practical experience in aircraft design.
  • Good communication and presentation capability.
  • Good teamwork capability.
  • Good command of English.

Job Description:
  • Participate in the Computerized-AFM development requirements analysis and design.
  • Participate in the Computerized-AFM software architecture design.
  • Participate in the Computerized-AFM aircraft performance algorithm design.
  • Generate the  aircraft Computerized-AFM development technical solutions, technical standards, and technical indicators.
  • Provide technical support to existing airframe versus Computerized AFM airworthiness certification activities including development of airworthiness plans, basis of certification, and other issue.
  • Research the cutting-edge method of the transport category aircraft performance computational software.

Candidates should be prepared to live and work in China full time  on a fixed term contract basis - duration 1-3 years. Applicants are asked to highlight their relevant experience upon application.
 
Job Number: BH-303
Job Location: Shanghai, China
Rate: Good salary and benefits Negotiable
Per Diem: --
Overtime: --
Duration: 1-3 years
Start Date: 10/01/2020
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer.


This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.
Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.


Responsibilities:


Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.



Skills/ Qualifications / Experience Sought:



Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BH-55-4
Job Location: Shanghai, China
Rate: Good Package- Negotiable
Per Diem: --
Overtime: --
Duration: 1-3 years duration
Start Date: 10/01/2020
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Aircraft Systems Engineers -- Many new long term programs in Missouri

Description:
Systems Engineers with avionics or software; DOORS or Rhapsody needed

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineers - Many Needed

Description:
In your role, you will:
Review certification plans
Write development and certification test procedures (Test Definition Sheets)
Plot and analyze ground and flight test data
Create flight test reports containing data demonstrating proper system operation as required by TC/FAA/EASA Regulations
Assist technicians in troubleshooting aircraft avionics system problems
Create development engineering documentation for design changes, in a flight test environment
Provide system performance analysis to ensure proper operation as per the design specification

Qualifications
As our ideal candidate,
You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in Avionics systems design and certification OR a minimum of 12 years’ experience if no degree.
You must have previous experience of supporting aircraft ground, flight, and functional testing.
You have a working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems. (preferred)
You must have a good working knowledge of FAA & EASA Part 25 certification requirements.
You must have working knowledge of RTCA documents DO-178 and DO-160.
You must have the ability to interpret software documentation including logic diagrams related to avionics systems.
You must have experience with utilizing ARINC data to isolate faults related to system controls software.


Email resume to: mmccarthy@pdstech.com
 
Job Number: Bomb-EleAvionics
Job Location: Wichita, KS
Rate: $65.00-$75.00/hour
Per Diem: Possible
Overtime: NO
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Biostatistician

Description:
Through Statistics, this person will define the sample size for people/ animals/ test so the results coming from theses clinical tests are positive.
The person will interact in general in support of researcher, scientist and doctors.

Requirements:
  • Understands Biologic Scientific environment and the different lab test processes.
  • University degree (Master / PhD) in Statistics, Chemometrics, Data Science, or related field
  • 3-5 years relevant work experience in applying industrial statistics within pharmaceutical industry for process and analytical development and validation; specifically, a significant expertise in the validation of analytical methods is required as referred in ICHQ2-8 and USP1032-34.
  • Knowledge of vaccines or biological products, especially in the development and lifecycle management of such products
  • Fluent English required; second language desirable (i.e. French)
  • Knowledge of a broad range of statistical sciences applications, such as linear mixed model, DOE, sample size with knowledge of statistical and programming software (SAS, R, JMP). Strong SAS skills.


 
Job Number: 2010115604
Job Location: Rockville, MD
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Keith Zingler
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvBsQAK&URLSource=cjhunter

Business Systems Analyst - Brewer

Description:
Business Systems Analyst - Brewer
The product solution that make up this role provide financial institutions the ability to view historical reports and audit data through a front-end GUI. In addition to maintaining the infrastructure for Director Document Archive.
All of these technologies run on a Windows environment. The candidate must have a strong Microsoft OS, SQL and IIS foundation.
This is a rewarding and challenging opportunity for the right candidate to be actively involved with the technical side of delivering a high value product solution to our clients.

Essential Job Responsibilities:
Setup, troubleshoot and maintain day-to-day activities within the ISG Director group
Work with client services, infrastructure group and product management to maintain product stability
 
Basic Qualifications for Consideration:
Minimum of five years work-related experience. Must be able to make decisions, resolve problems using experience and professional judgment, follow specific instructions, perform repeatable technical product implementations, manage multiple implementation projects simultaneously and possess effective multi-tasking skills. Must show a demonstrated work history of learning technical software applications, processes and procedures as well as performing technical product implementations.
Must:
Work well with others
Have strong communications skills (verbal and written) with special attention to technical content
Have effective problem-solving skills
Possess a strong work ethic
Possess strong retention skills
Have analytical problem-solving ability
Have a good working knowledge of Microsoft SQL and Microsoft Windows servers, including hardware and software
Be able to take ownership of job duties & responsibilities as well as work independently with minimal supervision and oversight

Preferred Qualifications:
Microsoft SQL 2012 & higher
Microsoft SQL Query Language
Microsoft Server 2012 & higher
Microsoft Internet Information Services (IIS)
FTP file movements and file transmissions
Working knowledge of network connectivity including basic connectivity troubleshooting
Technical product implementations (includes SQL DBA & Windows Server administration functions)
Automated file processing
A wide variety of 3rd party programs and applications
Power Shell knowledge
Education: Bachelor’s Degree in computer science and/or related field required. Equivalent work experience may be substituted.
 
 
Job Number: 2010118786
Job Location: Alpharetta, GA
Duration: 18 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6Y2QAK&URLSource=cjhunter

Business Systems Analyst 1 - Compliance

Description:
Purpose and Scope: 

Under direct supervision, formulate and define systems scope and objectives through user needs and an understanding of business systems and industry requirements.

Essential Responsibilities:
 
  1. Participate in key initiatives to enhance IT Compliance
  2. Assist with application user security setup including request ticketing and user setup within applications such as Deltek Costpoint, IBM Cognos, Deltek Time & Expense, and others.
  3. Perform and support formal and informal application security audits.
  4. Work with cross-functional teams to review application security setup and implement application security design changes to help meet the organizations visions and goals.
  5. Assist in maintaining IT business system compliance with FAR, DFARS, ITAR, and SOX.
  6. Evaluate control gaps and document findings including corrective action plans.
  7. Design or modify system reports, security access rules and system constraints.
  8. Write and test procedures.
  9. Prepare detailed documented requirements for selected activities.
  10. May provide administrative support to project management staff in customer meetings, presentations and briefings.
  11. Maintain and establishes a filing system for correspondence, project status report, and other technical documentation for tracking and inventory control.
  12. Comply with hardware and software systems standards and procedures.
  13. Perform all other position related duties as assigned or requested.


 
Job Number: 1910107368
Job Location: San Antonio, TX
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMewQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer (Machined Components)

Description:
A Buyer (Machined Components) job in Phoenix, AZ is currently available through Belcan. In this role, you will be responsible for performing day to day tactical purchasing functions for various spaceflight systems. You will share in the team's impact on all aspects of supplier communications, product pricing, quality, and build schedule. To be considered for this role, you will have a Bachelor's degree in Business Administration or a related field, plus a minimum of 3 years of tactical level experience in purchasing aerospace machined components.

Buyer (Machined Components) Job duties:

* Coordinates purchasing material, services, and product requirements for programs.
* Works with program leads to identify long lead materials.
* Works with sourcing and program team to select suppliers for bid and award from the approved list in order to achieve program objectives.
* Requests quotes from suppliers to determine best option for the customer.
* Prepares purchase orders in Coupa and Costpoint software and send out to suppliers as needed.

Qualifications:

* Minimum of 3 years tactical level experience in purchasing aerospace machined components.
* Knowledge of tight tolerance machined parts and exotic metals.
* Experience with machining and machine type production processes.
* Strong skills in Microsoft Outlook and Windows programs (Excel, Word, PowerPoint).
* Ability to work in a fast paced and changing environment to accomplish goals while managing multiple tasks.
* Must be a US Citizen.

If you are interested in this Buyer (Machined Components) job in Phoenix, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 305898
Job Location: Phoenix, Az
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter

Description:
CAD Drafter Core Responsibilities

Design and create product based on the approved quote/job contract 
Produce list of materials, fabrication drawings, approved samples, and customer’s field measurements.
Coordinate with fabrication department through all stages of fabrication, finishing, and packaging in order to ensure a finished product conforming to all required specifications.
Draft the shop drawings and following through with any changes required by customer/architect revisions
Responsible for coordination of job with customer throughout all stages of the project, participate on job review meetings, job site visits, field measuring and design implementation.
CAD Drafter Knowledge

Knowledge of manufacturing processes, engineering of architectural systems for commercial and residential structures, architectural and building documentation.
Understanding of industry standard drafting practices for architectural and mechanical drawings.
Hand sketching abilities.
Proficient with CAD software


CAD Drafter Educational/Experience

Associates degree
2+ Years Drafting
2+ Years Previously in Manufacturing Environment 
2+ Years Construction Experience 
Proficiency in AutoCAD or similar software 
 
Job Number: 8794
Job Location: North Haven, CT
Rate: Open
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Jeremy Hirsch
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Advanced Systems Administration Specialist

Description:
CL - Advanced Systems Administration Specialist

Job ID # 2020-11870

Contract Opportunity

Location: Pittsfield Massachusetts

Industry: Aerospace & Defense

Minimum Clearance: Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Serve as a front-line interface to users with technical issues by conducting systems analysis and development to keep systems current with changing technologies.
Install new software, troubleshooting, granting permissions to applications and training users.
Responsible for the day-to-day support of server services by performing server administration for physical and virtual server operating systems and configuring, maintaining and troubleshooting of physical and virtual hardware and network related interfaces on servers.
Perform OS and vendor software patching on servers and monitor physical and virtual servers performance using monitoring tools.
What You’ll Need:

Familiarity with compliance controls: STIGs (Security Technical Implementation Guides), RMF (Risk Management Framework), DFARS (Defense Federal Acquisition Regulation Supplement), NIST SP 800-171, Cybersecurity Maturity Model Certification (CMMC)
Familiarity with developer tools : JIRA, Jenkins, Git Runner, Software Development Kits (SDK)s
Scripting languages such as bash, Python, Ruby
Configuration Management tools (Git/GitLab)
Kickstart to automate installation of operating system
Monitoring and alerting packages such as Nagios and Ganglia
TCP/IP, Internet Routing Protocols, private and public networks, VLANs, Firewalls, Load Balancers, addressing schemes, subnet creation and subnet masking
Experience with patching of Windows platforms Client 10 and Server 2012/2016 or newer
Experience with patching of RedHat Linux/CentOS
Experience installing, configuring, and writing ansible playbooks for automation supporting infrastructure production and development environments
Experience managing virtual machine with VMware vSphere and related technologies
Creative thinking with the ability to multi-task
Team player who thrives in collaborative environments and revels in team success
Commitment to ongoing professional development
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Computer Science, a related field of equivalent experience combined with 5 + years of relevant experience; or Master’s Degree combined with 3 + years of relevant experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11870
Job Location: Pittsfield, MA
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Chemist

Description:
Chemist
Direct Hire
Location: Saint Louis, MO (Fenton)
Hours: M-F (8 to 5)
Description:
Coordinate with other Quality Control chemists, R&D researchers and formulation specialists and other manufacturing departments to ensure high quality standards are always met.
Responsibilities:
  • Follow cGMP, cGLP, and OSHA guidelines with regard to work practices and safety
  • Perform a variety of analytical procedures in the analysis of pharmaceutical products and raw materials by various testing techniques including but not limited to Wet Chemistry, GC, HPLC, UV-Vis, FTIR, and Dissolution etc.
  • Qualify, calibrate, and maintain chemical laboratory equipment
  • Read, understand and interpret analytical procedures
  • Document work clearly and perform test accurately
  • Peer review data and reports
  • General laboratory maintenance
  • Other duties as assigned

Required Skills:

  • Minimum 2-3 year of experience in USP method / inhouse method of analysis
  • Minimum 2-3 years of experience preparing cGMP and other laboratory documents
  • Minimum 2-3 years of experience with cGMP and FDA regulations
  • Proficient in chromatography software
  • Excellent organizational and problem-solving skills
  • Sound knowledge of laboratory apparatus and equipment and a variety of laboratory techniques and work independently with minimum supervision.


  • Proficient in Microsoft Word, Excel, and PowerPoint
  • Experience in HPLC, dissolution handling,
  • Experience troubleshooting the HPLC and GC
  • Experience with ICH, DEA, Head Space, and IC regulation knowledge
  • Proficient in Chromeleon and Chemstation software or other similar 21 CFR compliant software.
  • USP, BP, EP, and JP methods of analysis


  • Ensure that all data comply with cGMP, FDA and/or other appropriate regulatory guidelines.

Education and Experience:

  • Bachelor’s degree in Chemistry with a minimum of three (3) years of laboratory experience, preferably in the pharmaceutical industry; or
  • Master’s degree in Chemistry with a minimum of three (2) years laboratory experience, preferably in the pharmaceutical industry


 

 
Job Number: 2010118989
Job Location: Fenton, MO
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7ASQA0&URLSource=cjhunter

Chemist

Description:
Coordinate with other Quality Control chemists, R&D researchers and formulation specialty
and other manufacturing departments to ensure high quality standards are always met.

Responsibilities:
  • Follow cGMP, cGLP, and OSHA guidelines with regard to work practices and safety
  • Perform a variety of analytical procedures in the analysis of pharmaceutical products and raw materials by various testing techniques including but not limited to Wet Chemistry, GC, HPLC, UV-Vis, FTIR, and Dissolution etc.
  • Qualify, calibrate, and maintain chemical laboratory equipment
  • Read, understand and interpret analytical procedures
  • Document work clearly and perform test accurately
  • Peer review data and reports
  • General laboratory maintenance


 
Skills and Abilities Required:
  • Minimum 2-3 year of experience in USP method / inhouse method of analysis
  • Minimum 2-3 years of experience preparing cGMP and other laboratory documents
  • Minimum 2-3 years of experience with cGMP and FDA regulations
  • Proficient in chromatography software
  • Excellent organizational and problem-solving skills
  • Sound knowledge of laboratory apparatus and equipment and a variety of laboratory techniques and work independently with minimum supervision.
  • Proficient in Microsoft Word, Excel, and PowerPoint
  • Experience in HPLC, dissolution handling,
  • Experience troubleshooting the HPLC and GC
  • Experience with ICH, DEA, Head Space, and IC regulation knowledge
  • Proficient in Chromeleon and Chemstation software or other similar 21 CFR compliant software.
  • USP, BP, EP, and JP methods of analysis
  • Ensure that all data comply with cGMP, FDA and/or other appropriate regulatory guidelines.


Minimum Education and Experience Required:
Bachelor’s degree in Chemistry with a minimum of three (3) years of laboratory experience, preferably in the pharmaceutical industry; or
Master’s degree in Chemistry with a minimum of three (2) years laboratory experience, preferably in the pharmaceutical industry
 
 
Job Number: 2010114052
Job Location: Fenton, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tom Villhard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OotbQAC&URLSource=cjhunter

Cloud Architect - Java

Description:
"Cloud Architect - Java
Position Purpose:
Lead/support technical teams to architect, build, and deploy cloud solutions across public, private and hybrid cloud environments to support enterprise clients. Cloud Infrastructure Architects are responsible for designing, maintaining and troubleshooting the Bank Solutions infrastructure, cloud services, network, and infrastructure security. Cloud Architects will work closely with other cloud teams, project managers, engineers, and other functions.

Business Description:
Analyzes technical and business procedures and assists in the development of detailed specifications from which programs will be written. Develops, codes, tests, debugs, maintains, modifies, and installs computer software. Recommends major changes in procedures and software development activities.

Essential Job Responsibilities:
• Cloud infrastructure design and develop detailed architecture models to host test, development, and production environments
• Plan for system and application migration(s) to the cloud, adhering to technical and business requirements
• Develop and document technical designs for integration and implementation of new cloud applications and systems
• Optimize cost of cloud solutions, infrastructure footprint.
• Communicate effectively through strong written and oral communication skills for technical and non-technical audiences
• Integrate with non-cloud technologies and third-party vendor products/services
• Experience with highly-available and fault-tolerant enterprise and web-scale software deployments
• You will join a project team and focus on adding hands-on technical expertise, ensuring outcomes meet the highest technical and agile standards.
You will act as the SME on Cloud and related technologies for the project delivery team. Strong experience in a multi-disciplined team is critical as is your ability to clearly communicate complex technology solutions.
 
Required Qualifications:
Education:
A completed Bachelor’s Degree in IT, or an Associate’s degree in Computer Programming, or equivalent education in a related discipline is preferred.
Certifications in Cloud technologies ( AWS , Azure , PCF/PKS ) is strongly encouraged
Job Related Experience:
Minimum 8+ years of experience required
Work experience should include extensive knowledge of Container technologies.
2+ years of experience using Kubernetes
Hands-on development/coding experience using Java , Spring framework (i.e. program design, flowcharting, coding, testing, debugging, etc )
Knowledge / experienced in DevOps principles and practices.
A successful candidate will have excellent analytical and problem-solving skills, strong communication skills, and a motivation to achieve best-in-class results
Expert with Design patterns, SOA design & web service development
Strong experience in developing for high-availability clustered environments
Working knowledge of Unix/Linux systems shell scripting
Strong communication and writing skills
Comfortable working in a flexible Agile development environment
Expert knowledge of SQL statements
Additional Skills/Knowledge:
Experience in documenting program design, coding, and maintenance.
A strong knowledge of the relationship between software and hardware interaction.
The ability to interact with external and internal clients for the purpose of data gathering and design initiation."
 
 
Job Number: 2010118787
Job Location: Alpharetta, GA
Duration: 18 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6Y7QAK&URLSource=cjhunter

Communication / Network Systems Design Engineer 5

Description:
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship

Acts as a SME to work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Experience with design and implementation of real-time software / gateware / firmware for digital communications and / or signal processing algorithms
- Professional work experience with Verilog and / or VHDL

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 374564
Job Location: Germantown, MD
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components/LRU Systems Supplier Management

Description:
This position is responsible for managing suppliers of line replaceable units (LRUs) used on a new aircraft turbine propulsion system. The successful candidate will have systems engineering experience and understand how to flow system requirements to the individual LRU suppliers. The candidate will work with suppliers to identify LRU qualification test failures and work corrective actions with the suppliers.

REQUIRED SKILLS:

* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* Supplier Management experience
* Systems requirements flow down & management experience
* Understanding of design process
* Understanding of qualification process
* Ability to drive teams to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented


PREFERRED:

* Engine LRU familiarity
* Supplier Management of Components such as valves, temp/pressure sensors, torque sensors, etc. a PLUS
* DOORs familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Model Development & Analysis Systems Engineer

Description:
This position requires translation of textual requirements into Matlab/Simulink models which are then used to automatically generate the associated software source code. The successful candidate is proficient in modeling, simulation and analysis of control systems.

REQUIRED SKILLS:

* Bachelor's degree in Computer Science or Electrical/Computer/Aerospace Engineering
* Aerospace components modeling experience
* Ability to translate textual requirements into Matlab/Simulink models
* Tools usage: Matlab/Simulink, DOORs, Configuration management tool experience
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

THE FOLLOWING SKILLS WOULD BE A PLUS:
* Engine Controller product experience
* Control Logic experience
* Control Laws development experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

County Technician

Description:
Position Title: County Technician
Description: Individual will be trained in the successful setup and operation  of voting equipment products, with the intent of providing technical and operational support to the election staff of an assigned county.
Job Duties
Interface with customers as the on-site support source for our products and the first tier of technical and operational support in system usage.
Serve as the communication liaison between the company and the County Election Officials via in-person, telephone and email interaction as required for:
  • Proper operation of the system components;
  • Maintenance of voting system components.
  • Coordination of the RMA process when necessary.
  • Assisting in pre-election and post-election Logic and Accuracy Testing.
  • Training of associates and customers on products and procedures.
  • Training temporary county staff during the election cycle as required.
  • Ancillary election activities as required.
  • Assist with the maintenance of all records related to voting system components by completing and submitting all required and necessary paperwork.

Documents and reports all anomalies and issues encountered for all hardware and software products.
Adheres to all local, state, and federal rules and regulations that pertain to the operation of election systems.
Ensures compliance with product warranty requirements.
Identifies and describes product issues to contribute to ongoing product development
Education, Experience and Skills:
Minimum Requirements
 
  • Minimum of a high school diploma or GED;


  • Minimum of one (1) year of related computer maintenance work experience;


  • Experience using various technological operating systems;
  • Some customer service work experience;
  • Valid Driver’s License
  • Clean background check, no criminal record of any type;
  • Cannot be active in political cause or political party activities


Preferred Qualifications
 
  • Minimum of one (1) year of experience performing setup and maintenance work on computer equipment preferred.
  • Preferred CompTIA A+ Certification
  • Experience in working in an election environment is desirable, but not mandatory
  • Experience working in an election environment or polling site is desirable



Skills:

  • Working knowledge of service set-up, repairing and maintaining computer equipment and machinery;
  • Understanding of the hazards and safety precautions involved in repairing and maintaining computer equipment and the related software used in computer equipment.
  • Ability to troubleshoot and identify system problems and replace as necessary using various hand tools and equipment.
  • Ability to explain and/or demonstrate equipment operations to others.
  • Ability to understand and follow oral and written instructions and maintain effective working relationships with associates and the general public.


Physical Conditions & Work Contacts:
Requires the ability to lift and carry items weighing 20-50 pounds, with occasional lifting of items weighing up to 50 pounds. Requires ability to work a flexible schedule.

Ability to travel to an assigned county location from home or to overnight stay in that county during the week. 

Ability to work evenings and weekends when the preparation tasks of the election cycle require it.
 
 
Job Number: 2010113317
Job Location: Smyrna, GA
Duration: 2 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr5kQAA&URLSource=cjhunter

Creative & Business Writing

Description:
PDS Tech, Inc. is seeking a Creative & Business Writing for an open position in Huntsville, AL.
Description:

Analyze Engineering documents (EIs, ECs, etc.) for impact to Maintenance/Flight/RPSTL publications. Act as a liaison between engineering, suppliers and management, including the coordination of offload, authoring and review efforts. Assist the Logistics Element Manager with delivery of Publications/LSA/Provisioning data to customer in accordance with cost, schedule, quality and technical performance requirements as agreed to by contract. Comply fully with International Trade Compliance (ITC) policies to ensure that all documents are correctly marked and processed prior to publication and export. Be cognizant of International Trade Compliance (ITC) policies including interpretation of company policies and procedures, work instructions and ITAR regulations in relation to S&T deliverables. Maintain weekly project status and report as required. Perform QCPC evaluations on supplier projects in an effort to track/reduce defect rates.
Maintain detailed records of all publication changes and source documentation and be able to provide metrics to management. Host/attend Program Reviews as needed to draft/review content or address comments/concerns. Investigate/reply to customer comments and coordinate with engineering and suppliers to address comments/concerns as necessary. Identify areas of opportunity to improve day to day operations and implement ACE tools that aid on waste elimination and process improvement
Required Experience/Knowledge: 
  • Highly proficient in Extensible Markup Language (XML)

    Proficient in the use of at least one of the following Editing Software: ArborText, Ultra-Edit and Notepad++

    Knowledge in the use of Sikorsky Proprietary Software: Contenta/XyVision

    Knowledge in the use of Desktop Applications: Microsoft Office, Beyond Compare, Adobe Acrobat Pro, IADS-4 and IETMs

    Ability to oversee multiple projects of varied size and scope

    Effective communications skills (both written and oral)

    Highly motivated

    Strong organizational skills

    Able to think and operate independently



    Education: BA/BS Degree in Business Administration or related field esperience, or equivalent.



    Experience: Prefer 10+ years’ experience on UH/MH/HH-60 or S-70 Black Hawk helicopter as a maintainer specializing in avionics. 4 to 7 years technical writing experience, XML interpretation and understanding, technical background, ability to read and interpret Engineering wiring diagrams, Engineering structural diagrams, Engineering Change Notices (ECNs), Engineering Change Proposals (ECPs), Publication Change Requests (PCRs), and vendor data to aid in incorporating changes into existing publications and/or authoring new publications and various other technical data related to assigned tasks

 
Job Number: 2010119275
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P8BXQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Design Engineer ( Goleta, CA ) #10570519J

Description:
Design Engineer ( Goleta, CA ) #10570519J
12 Month Contract

Pay Rate: $50-65/hr Depends on experience

Minimum 2 years experience

The position is in Goleta CA, part of the Tactical Space Systems Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures.
As a Ground Support Equipment Engineer you will work with the flight hardware designers and be responsible for assisting and creating tools required to manufacture and test deployable structures and mechanical mechanisms at the cutting edge of space technology. You will be mission oriented and strive for innovative and cost effective technical solutions for successful program execution. You will work with a team from the concept creation through the design and analysis phases and may also participate in the manufacturing, testing, and integration of the systems.

**Looking for Responsibilities:
• Support and occasionally lead development of non-flight hardware: Create, prototype, design, and analyze Ground Support Equipment (GSE) required for manufacturing and testing moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and non-flight subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs, generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Document test plans and procedures requirements.
• Participate in internal and external (customer) design reviews as needed.
• Strive for the highest possible structural performance that is also cost effective and assures complete reliability.
• Manage and track multiple priorities while maintaining a focus towards common project goals of the program team, matrix organization, and customers.\\

**Basic Qualifications:
• Bachelor of Science Degree in a STEM (Science, Technology, Engineering, or Math) related field.
• Experience with mechanical computer aided design (CAD) software
• Strong communication skills, oral and written.
• Working knowledge Microsoft Office tools (Word, Excel, Power Point or Project)
• Ability to work independently as well as in a team environment.
• Ability to multitask and organize/prioritize job assignments in a fast-paced and gated-release engineering development environment.
• Candidate must be available to start immediately.
 
Job Number: #10570519J
Job Location: Goleta, CA
Rate: 65
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Customer Training Specialist 4

Description:
Chipton-Ross is seeking a Customer Training Specialist 4 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.

REQUIRED EXPERIENCE:
Minimum of 7 years' experience with maintenance working on engine/sec power systems
Minimum of 2 years experience working on F-15 aircraft

ADDITIONAL EXPERIENCE:
Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
Minimum of 3 years' experience with training courseware development with platform instructions

EDUCATION:
Accredited Technical Bachelor's degree and typically 9 or more years' related work experience or a Master's degree with typically 7 or more years' or a PhD degree with typically 4 or more years' related work experience or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.

FULL TIME/1ST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 186297
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

Customer Training Specialist 4

Description:
PDS Tech is seeking a Customer Training Specialist  for an open position in Hazelwood, MO
In your role, you will: 

Email resume to: mmccarthy@pdstech.com or contact Mary Ann McCarthy @ 314-504-6039

  • Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.

Basic Qualifications:



• Minimum of 7 years' experience with maintenance working on the egress systems

• Minimum of 2 years’ experience working on F-15 aircraft

• Minimum of 7 years' experience with maintenance working on AFE/Life Support systems and equipment



Preferred Qualifications:



• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

• Minimum of 3 years' experience with training courseware development with platform instructions

Train AFE/Life Support maintenance technicians in support of F-15QA aircraft

• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

• Minimum of 3 years' experience with training courseware development with platform instructions
 
Job Number: 2010115740
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvbBQAS&URLSource=cjhunter

DOD - Technician - Test - Level 3

Description:
PDS Tech, Inc. is seeking a Test Technician in Clearwater, FL
Weekend Shift (3-12's) Day & Night Shift Options

Summary:
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • Requires knowledge of industry specific tests and testing equipment.
  • May recommend changes in testing methods or equipment changes.
  • Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Conduct performance and diagnostic testing with automated and manual test operated equipment.
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments.
  • Handle and process customer material, test records, and associated documentation.
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements.
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying policies and procedures.
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use.
  • Utilize product & process knowledge to conduct high level troubleshooting.
  • Support the flexible workforce initiative training and working across multiple test cells and products.
  • Coach, mentor, and train Interact with other Test Team members.
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity.
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying policies and procedures
  • Utilize tools, computers, and office equipment as required to complete job related tasks.

Prerequisites:
  • Minimum HS; preferred Associate, Technical, or military equivalent.
  • Must be a US Citizen only.
  • Must have an active Secret Clearance.
  • 2+ years of experience in the field or in a related area.

 
Job Number: 2010118260
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P4r0QAC&URLSource=cjhunter

DOD - Technician - Test - Level 3

Description:
PDS Tech, Inc. is seeking a Test Technician in Clearwater, FL
1st, 2nd & 3rd Shift available


Summary:
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • Requires knowledge of industry specific tests and testing equipment.
  • May recommend changes in testing methods or equipment changes.
  • Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Conduct performance and diagnostic testing with automated and manual test operated equipment.
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments.
  • Handle and process customer material, test records, and associated documentation.
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements.
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying policies and procedures.
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use.
  • Utilize product & process knowledge to conduct high level troubleshooting.
  • Support the flexible workforce initiative training and working across multiple test cells and products.
  • Coach, mentor, and train Interact with other Test Team members.
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity.
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying policies and procedures
  • Utilize tools, computers, and office equipment as required to complete job related tasks.

Prerequisites:
  • Minimum HS; preferred Associate, Technical, or military equivalent.
  • Must be a US Citizen only.
  • Must have an active Secret Clearance.
  • 2+ years of experience in the field or in a related area.

 
Job Number: 2010118258
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P4qlQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/19/2020
Last Updated: 11/30/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Design Engineer

Description:
Design complex, standard or custom, mechanical and structural airframe installation packages in new Helicopter. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

Primary Responsibilities:
Detail Design:
•   Create detail/assembly/installation drawings for new helicopter completions and STC projects.
•   Review and facilitate engineering package release.
•   Works with groups of engineers to complete projects.
•   Works under general supervision from the Lead engineer
•   Follows established procedures
•   Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
Project Coordination:
•   Coordinates essential information into the configuration management system listing mechanical and structural installations for each aircraft unit produced by AHI
•   Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
Engineering Support:
•   Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
•   Act as liaison to manufacturing and production efforts as needed.
•   Support installation, functional and operational tests, and ground and flight tests.
Structural Substantiation:
•   Performs preliminary stress analysis in support of initial layout and design concept.
 
• Must have a minimum of 4000hrs CATIA V5 (or similar 3D modeling software)   
• Bachelor's degree in Aeronautical/Mechanical/Civil Engineering from an accredited college/university or equivalent experience

•   Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
•   Minimum one (1) year of helicopter design and integration.
•   Knowledge of aviation/aerospace structural design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations.  Direct experience with rotorcraft is preferred.
•   Must be able to communicate effectively in the English language (verbal and written). French or German a plus.
•   Must be proficient with Microsoft Office Suite programs.
•   Familiarity with AutoCAD and SAP programs


 
 
Job Number: 2010118901
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Ferreol Marande
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6mBQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Design and Analysis Engineer

Job ID # 2020-11864

Contract Opportunity

Location: Germantown, MD

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 9 Years

 

What You’ll Do:

Act as SME to work with customers to develop and document complex electronic and electrical system requirements.
Lead and coordinate work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
Lead work to test and validate to ensure system designs meet operational and functional requirements.
Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Research technology advances for potential application to company business needs.
Make recommendations for technology investments.
What You’ll Need:

Ability to Obtain Secret Clearance
Experience with design and implementation of real-time software / gateware / firmware for digital communications and / or signal processing algorithms
Professional work experience with Verilog and / or VHDL
Computer literate
Must be able to read and write training material/job material
Successfully completing training OJT is a contingency
Preferred Qualifications:
Knowledge of digital signal processing / digital communications algorithms and techniques (turbo / - -Viterbi coding / decoding, channel estimation, equalization, filter design, sampling theory, etc.)
Experience with high speed digital interfaces
Experience in Xilinx and / or Altera design
Experience coding in MATLAB
Experience coding in C / C++
Experience coding in Python
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Engineering, Computer Science, Mathematics, physics or chemistry combined with 9 + years of relevant work experience; or Master’s Degree combined with 7 + years of relevant work experience; or PhD combined with 4+ years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11864
Job Location: Germantown, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Design and Analysis Engineer

Job ID # 2020-11865

Contract Opportunity

Location: Germantown, MD

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 14 Years

 

What You’ll Do:

Act as a SME to work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
Work with other to develop program test strategies.
Manage performance of critical suppliers to ensure system integration and compliance with requirements.
Conduct program independent reviews and reports results to program leadership.
Provide critical support of fielded hardware and software over the entire product lifecycle.
Lead research into technology advances for potential application to company business needs.
Make recommendations for technology investments.
Recognize as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
What You’ll Need:

Ability to Obtain Secret Clearance
Experience with design and implementation of real-time software / gateware / firmware for digital communications and / or signal processing algorithms
Professional work experience with Verilog and / or VHDL
Computer literate
Must be able to read and write training material/job material
Successfully completing training OJT is a contingency
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Engineering, Computer Science, Mathematics, Physics, or Chemistry combined with 14 + years of relevant work experience; or Master’s Degree combined with 12 + years of relevant work experience; or Master of Doctorate of Science degree from an accredited course of study.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11865
Job Location: Germantown, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 5 located in El Segundo, CA.

RESPONSIBILITIES:
Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test. Development of module, board and slice-level requirements derived from higher-level unit requirements. Development and maintenance of performance budgets and analyses that flow into worst case unit analyses. Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists. Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

REQUIRED EXPERIENCE:
Technical skills required are related to RF, Digital and Avionics Communications Subsystems Engineering with the following activities supported in terms of responsibility, authority and accountability:
Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists.
Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test.
Development of module, board and slice-level requirements derived from higher-level unit requirements.
Development and maintenance of performance budgets and analyses that flow into worst case unit analyses
Supplier management activities at various supplier sites
Requirements and verification support for Avionics units

Leads work with customers to develop and document complex electronic and electrical system requirements.
Oversees the design and build of multiple satellite and avionics units.
Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
Leads work to test and validate to ensure system designs meet operational and functional requirements.
Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Researches technology advances for potential application to company business needs.
Makes recommendations for technology investments.
Experience with digital circuit design.
Knowledge of FPGAs/ASICs

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8:00 AM - 5:00 PM

TRAVEL COMMENTS: 10% travel

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 187008
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 5

Description:
PDS Tech, Inc. is seeking a Design and Analysis Engineer 5 in El Segundo, CA
Support state-of-the-art communications subsystems for both commercial and national security programs, from design and development though unit-level integration and test.
Development of module, board and slice-level requirements derived from higher-level unit requirements.
Development and maintenance of performance budgets and analyses that flow into worst case unit analyses.
Interact directly with customers, suppliers, program management, integration and test engineers, and senior technologists.
 
  • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
  •  Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
  • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
  • Works with other to develop program test strategies.
  • Manages performance of critical suppliers to ensure system integration and compliance with requirements.
  • Conducts program independent reviews and reports results to program leadership.
  • Provides critical support of fielded hardware and software over the entire product lifecycle.
  • Leads research into technology advances for potential application to company business needs.
  • Makes recommendations for technology investments.
  • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
 
Job Number: 2010117629
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P2ozQAC&URLSource=cjhunter

DevOps Billing Operations Engineer

Description:
What does a great DevOps Billing Operations Engineer do?
Every day, Clover devices handle the core credit card and point-of-sale processing for hundreds of thousands of merchants. Behind the scenes, we operate a cloud platform providing processing, storage and collaboration for merchants, application developers, service providers and our merchants' customers. To support all of this, we have a team of engineers dedicated to ensuring our systems remain operational, safe and secure. The Billing operations Engineer will have the following responsibilities:

Responsibilities:
Billing batch and web server health monitoring
Billing event readiness and support
Weekly and ad-hoc Billing Server Deployments
Deployment readiness and validation
Configuration control
Billing Service standup/setup
File Transfer - FDFG (First Data File Gateway)
Billing File Caches and File Manager artifact management
Logging (multi-environment)
Metrics (multi-environment)
Email (Billing to COS service)
Billing Expansion (region specific platform integrations)
 
Basic Qualifications for consideration:
High School Diploma
5-10 years IT experience
Experience with a cloud platform: AWS, Google Cloud, etc.
Proven OPs and Devops skills including the following code management, continuous deployment, and cloud monitoring tools: Git, Jenkins, Puppet, Rundeck, Terraform, Kibana, Wavefront
Experience in h MySQL / RESTful APIs
Data analysis experience preferably in a big data environment
Proficiency in Python (or other scripting language)
Experience writing unit, integration, and instrumentation tests
Flexibility to share on-call responsibilities
Experience managing complex software stacks moving between dev, stage, and production environments in support of several geographical regions
Preferred Qualifications for consideration:
BS in Computer Science or other Engineering disciplines
Prior experience with file transfer gateways, data encryption, and modern security protocols desired
 
 
Job Number: 2010118812
Job Location: CO Springs, CO
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6aNQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Database Administrator ( Dulles, VA ) 10776297

Description:
Doors Database Administrator ( Dulles, VA ) 10776297
6 Month Contract

Pay rate: $45-50/hr

The Systems Engineering Tools Group has an immediate need for an Applications Developer and Tool Administrator who builds and codes applications using languages such as IBM DOORS DXL, VBA, JavaScript, SQL, etc. and provides COTS tool administration support.

Tool Administration
Provide requirements management and tool administration for multiple programs in support of systems engineering teams
Guide systems engineers in utilizing the DOORS tool to effectively manage their requirements which may include defining schema, setting up databases, and identifying users and appropriate access levels
Provide support to maintain consistency across programs with respect to hierarchical structure, core attributes, and naming conventions
Identify, control, maintain and manage changes to program requirements baselines
Verify mapping of requirements to program documentation, identifying gaps and coordinating with responsible engineers
Gather and prepare requirements information in support of design reviews and technical meetings
Support DOORS users with process and tools questions and best practices
Applications Development
Experience in design and application of databases to support automation of common systems engineering processes
Knowledge of software engineering practices and software development methodologies
Develops new programs and subprograms, as well as enhancements, modifications, and corrections to existing software and scripts
Ability to develop innovative long-term solutions that are easy to use, integrate with other applications, and are straightforward to maintain
 
Job Number: 10776297
Job Location: Dulles, VA
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer I- Sterling, VA

Description:
We have an Excellent Contract to Hire position for an Electrical Engineer I to join a leading Company located in the Sterling, VA area.

**U.S. Citizenship Required**

Job Responsibilities:
• Responsible for researches, designs, develops, modifies, evaluates, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
• Conducts experimental tests on equipment and evaluates results. Develops specifications for selecting components and equipment to use. May also review vendors' abilities to support development.
• Must know SolidWorks for physical and structural comparison/product design
• Software used to produce PC boards
• Please send your resume and include the job 43054 for consideration
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 43054
Job Location: Sterling, VA
Rate: $48.20
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Electrical Hardware Design Engineer - Control System

Description:
This position is responsible for hardware electronic circuit design of Full Authority Digital Engine Control (FADEC) systems used for control of aircraft turbine engines.

REQUIRED SKILLS:
Bachelor’s degree in Electrical Engineering
5+ years Aerospace circuit design experience
Control systems hardware design experience
Engines/Propulsion, APU, or Flight Controls experience
Digital circuit design
Schematic capture
In-depth circuit analysis and simulation
Circuit board layout oversight
Familiar with requirements capture and management, and associated tools

PREFERRED SKILLS:
Engines/Propulsion product experience
Analog circuit design
EMI/HIRF/Lightning threat attenuation circuit design
Knowledge of DO-254 and its application in the development of complex systems hardware
Familiar with DOORS for engineering requirements management

THE FOLLOWING SKILLS WOULD BE A PLUS:
Experience developing DO-254 certification planning documents


Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 11/18/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Email: rtc-talentmgmt@real-time-consulting.com
Website: www.real-time-consulting.com

Electrical Hardware Engineer

Description:

We are looking to add an Electrical Hardware Engineer to our team who has "cradle to grave" experience with full-lifecycle complex electronic hardware design. This position will have made more than just incremental updates to a design and have experience going from initial requirements captured, through the schematic capture, PCB layout, DFM/DFT and product V&V and release process.
Ideal candidates will have backgrounds at newer EV companies or come from high-volume automotive and consumer electronics backgrounds. Aerospace background is not required as long as candidates exhibit a basic understanding of the unique elements involved in designing avionics for hostile environments.

Key Requirements:



  • Knowledge of PCB layout software (KiCad preferred, Altium is fine if you are willing to learn KiCad)
  • Understanding of aero/MIL standards relating to PCB/PWB design (IPC-2221, MIL-PRF-31032, NASA-EE-INST-002, AEC-Q100/101/200)
  • Detailed understanding of analog/mixed-signal fundamentals
  • Experience designing 500+ Watt to multi-Kilowatt DC/DC converters (buck-boost, SEPIC, split-pi topology or similar)
  • Experience working with motor control and/or power electronics (gate drivers for IGBT/MOSFET)
  • Experience designing mid to high-speed digital hardware (Microcontrollers, CPLD, DSP, System-On-Chip designs)
  • Fundamental understanding of EMI and grounding


 
Job Number: 2010119173
Job Location: Mojave, CA
Duration: 36 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7pvQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Hardware Supplier Management

Description:
This position is responsible for transitioning manufacturing of an aerospace LRU from in-house to a build-to-print supplier. Includes CCA manufacturing as well as final assembly of CCAs and other subassemblies into the LRU.

REQUIRED SKILLS:

* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* Supplier management experience
* Experience in electrical hardware manufacturing
* Understanding of Circuit Card Assembly (CCA) manufacturing processes
* Ability to analyze electrical hardware assembly issues and drive corrective actions
* Experience with Build-to-Print manufacturing
* Ability to identify root issues and drive team to success
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

Electrical Test Engineer

Description:
 PDS Tech, Inc. is seeking an Electrical Test Engineer, in Windsor Locks, CT.

Summary:

  • Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
  • This can involve testing, data analysis, and interface with all aspects of the engineering department.
  • Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. 
  • Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
  • Typical Duties: Support laboratory testing of Space hardware,
  • Develop and validate tooling concepts, 
  • Author and maintain operation/test procedures,
  • Preparation of standardized operation/test sheets, 
  • Defining test rig and facility requirements,
  • Participation on program Integrated Product Development teams, 
  • Review drawings and concepts, and resolve testability concerns.

​​​​​​​
Prerequisites:
  • Experience with advanced instrumentation and data acquisition systems is required.  
  • Knowledge of LabVIEW desired.
  • Experience should include working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
  • Capability of working independently and is self-motivated.
  • Excellent communication skills, written and verbal are required.
  • Ability to proficiently operate common Microsoft Office software products is required.


  • Bachelors

 
Job Number: 2010115312
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou6qQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Digital Communications Engineers - level 4 & 5

Description:
*Acts a SME to work with customers to develop and document complex electronic and electrical system requirements
Experience with design and implementation of real-time software / gateware/firmware for digital communications and / or signal processing algorithms
Professional work experience with Verilog and/or VHDL

**Must be degreed

Email resume to mmccarthy@pdstech.com Attn: Mary Ann McCarthy
 
Job Number: Elec/Digital - Bo-MD
Job Location: Germantown, MD
Rate: $73.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electro-Mechanical Assembler

Description:
Electro-Mechanical Assembler
A unique opportunity for very high electrical/mechanically inclined candidate!  Our mechanical assemblers support production operations by assembling electronic components, sub-assemblies, products or systems while meeting or exceeding standards for quality, productivity and safety.  The successful candidate will be highly mechanical with a background, skills or experience with Electrical wiring, panel building or similar skill-set.
Assembles framework and motors, checking parts for quality control
Operates hand tools such as ratchets, wrenches, drills, screw guns, etc.
Reads customer specification drawings.
Reads CAD drawings and can assemble using CAD software.
Uses testing and measuring equipment such as calipers and angle finders.
Sets up machines and determines if parts match specs, identifies and locates missing parts.
Recognizes the proper alignment and tolerance of all parts.
Sketches parts and updates prints as necessary
Assists or participates with Electrical team as needed
Participates and contributes to the lean manufacturing journey.
Assists in other areas and performs additional tasks as needed.
 
 Requirements
High School Diploma/GED required 
Technical Degree in Electro-Mechanical, Electrical or Manufacturing or related field preferred but willing to train motivated, mechanically inclined individuals seeking to build packaging machinery in our Green Bay location
Blueprint reading skills and experience     
3-5+ years of experience in related position preferred, but willing to train entry level candidates with relatable experience 
Must be able to stand for 8-10 hour shifts
Must be able to lift 40+ pounds regularly
 
 
Job Number: 2010117811
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P3UwQAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer

Description:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:
• Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
• Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:
• Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with Primary Development Environment:
• MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
• C/C++ code
• C# test scripts
• Serena Dimensions / PVCS
• Git
• Embedded Software Development environments
 
Job Number: swe1
Job Location: Ft. Worth, TX
Per Diem: Split
Duration: 6 - 12 Months
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

Embedded Software Engineer

Description:
Chipton-Ross is seeking an Embedded Software Engineer for an opening in Camden, NJ.

RESPONSIBILITIES:
Reporting to the Software Engineering Manager, the Embedded Cyber Software Engineer plays a key role in developing innovative software components to support C5S, C5 and Cyber Solution Centers.
Apply computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target hardware
Work closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system
Support and participate in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and formal test
Develop software test plans and procedures, and other relevant technical documentation
Utilize modeling tools and equipment to establish operating data, conduct experimental tests, prototype, and evaluate results
Participate in peer reviews, identify, track and repair defects
Utilize a variety of software languages (i.e., C++, C, Java, Python, Assembly) on Windows, Linux, mobile platforms, and embedded real time operating systems (VxWorks, Linux, Integrity, and others for Motorola, Intel, TI, and custom processor designs)

REQUIRED EXPERIENCE:
Object-oriented design and implementation experience, with exposure to software modeling and UML
Experience developing device drivers and Board Support Packages for real time embedded systems
Experience with cryptography and cryptographic applications, security architecture, multi-level and cross domain security solutions, and certification requirements
Hardware / Software Integration experience
Experience debugging real time embedded applications
Experience with static analysis, code coverage tools, and automated test frameworks
Knowledge of network architectures and protocols
Related coursework or experience developing software for embedded applications
Excellent oral and written communication skills

EDUCATION:
Accredited Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field

WORK HOURS:
9/80
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 187681
Job Location: Camden, NJ
Rate: $DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer – Level 4

Description:
Inconen is looking for an Engine System Design Engineer – Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-10+ years of related experience.

IMPORTANT:
-These two roles are in anticipation of a new program being awarded with a January 2021 start date. Expectations are that the program will be awarded, but there is always a chance it will not be.
 
Job Number: 12592
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer II

Description:
  • Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems. 
  • Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
  • Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations. 
  • Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
  • Maintain a regular and predictable work schedule.
  • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
  • Perform other duties as necessary.

  • BS degree or higher in Engineering or a related technical field is required plus 5 or more years related experience.
  • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
  • Current TS/SCI security clearance required.
  • Experience working in UNIX, Mac, and MS-Windows environments is preferred.
  • Good planning, organization, and communication skills.
  • Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
  • Good interpersonal and leadership skills.
  • A willingness and ability to learn many of the technical skills through on-the-job training.
  • Ability to remain calm and collected in stressful situations.
  • Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.


Working Conditions



  • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
  • May occasionally work in production work centers where use of protective equipment and gear is required.
  • May access other facilities in various weather conditions.
  • Travel and local commute between Ball campuses and other possible non-Ball locations may be required. 

 
Job Number: 2010114980
Job Location: Boulder, CO
Duration: 48 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot4LQAS&URLSource=cjhunter

Flight Simulator Design Engineer 4

Description:
Chipton-Ross is seeking 3 Flight Simulator Design Engineer 4's for openings in Berkeley, MO.

RESPONSIBILITIES:
Seeking F-15 Training Systems Test Pilot SMEs to accomplish system design, integration, and test for the F-15 Mission Training Center (F-15 MTC). Responsibilities include:
- The successful candidate will work independently and will assist other members of the Test Team in the performance of day-to-day operations in a fast-paced testing environment.
- Team members create and execute Test Procedures to ensure the trainers correctly simulates aircraft performance and the operational environment.
- Team members will help develop system requirements, and perform all aspects of system testing on several types of pilot training systems.
- Off shift and weekend work may also be occasionally required to meet contractual milestones, objectives and delivery schedules
- This is a mid-level to senior grade position

Plans research and development programs for flight simulator requirements. Translates contract requirements into work requirements, processes and tasks. Manages customer and supplier relationships. Researches and responds to specialized technical questions from customers on flight simulator operations, service and regulatory concerns. Provides on-site customer assistance to support the introduction of new training equipment. Resolves specialized customer issues in the field. Leads and reviews analysis and evaluation of specialized engineering and supplier aircraft systems and performance data, operational documents and software for delivery to customer. Researches and analyzes customer and regulatory authority requirements to ensure they comply with industry standards. Leads and reviews client processes across organizations for defining the customer product, delivery and support. Develops new/revised processes in support of customer requirements and/or changes in company guidelines. Works under minimal direction.

ADDITIONAL EXPERIENCE:
-Experience flying F-15 and/or other fighter aircraft within the last five years
- Experience in an aircraft test environment
- Experience flying F-15 and/or other fighter aircraft

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

TRAVEL: YES
Ability to travel domestically and internationally.25% international travel to Okinawa Japan and UK. Travel duration will be less that 29 days.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM
Ability to work flexible hours, overtime and occasional weekends when necessary.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184160
Job Location: Berkeley, MO
Rate: $DOE
Duration: 6 Months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Flight Software/Platforms Engineer

Description:
Key responsibilities:

- Architecting a robust, highly resilient and fault-tolerant distributed avionics system
- Developing FDIR (Fault Detection, Isolation & Recovery) algorithms
- Selecting third-party/open-source software frameworks (RTOS, middleware, bootloaders, C/C++ runtimes) based on system-level and schedule requirements
- Selection of peripheral devices and interfaces for processing platforms
- Development of drivers and board-support packages (BSP)
- Participating in informal and formal system design reviews and fault tolerance analysis/FMECA
- Supporting flight operations

Required skills:

- Thorough understanding of C and C++ (C++98 or greater)
- Understanding of build tools and infrastructure (compilers, linkers, debuggers, C/C++ runtime libraries, CI tools)
- Detailed knowledge of software design from first principles on x86, ARM & PowerPC architectures (bootloaders, startup code, C/C++ runtime implementation)
- Development of hard-realtime software in POSIX environments
- Basic understanding of operating system kernel configuration fundamentals for real-time system behavior
- Detailed understanding of common software design paradigms (message-passing, event-driven, RAII, et. al.)
- Understanding of considerations when developing fault-tolerant software components such as error-tolerant file systems, communications agents, memory-scrubbing/EDAC

Additional useful skills:

- Experience with Modern C++ (C++11/14 or greater) or emerging systems languages like Rust
- Understanding of basic EE hardware design concepts
- Board design/bring-up experience
- Knowledge of analog/mixed-signal systems design
- Experience in controls/GNC (implementing state estimation, sensor fusion & similar algorithms)
- Working knowledge of communications security (commsec) and information assurance concepts

 
Job Number: 2010117362
Job Location: Mojave, CA
Duration: 36 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P1nqQAC&URLSource=cjhunter

Ground Systems and Mission Operations Engineer

Description:
Key Responsibilities:
  • Management and coordinate the initial set up of Mission Operations Centre in Mojave CA
  • Development of the mission operation plans and procedure
  • Support the design and development of ground support equipment (GSE) for the XL-1 lunar lander
  • Support the implementation of ground support software and processes
  • Understand risk management processes and methods for adjudication program risk mitigation strategies

Required Skills:

  • Understanding of key mission phases and operations
  • Experience with spacecraft or remote location communications, commands and operations
  • Familiarity with ground system networks, consoles, databases and communication systems
  • Ability to quickly adapt to change and take direction as new information becomes available
  • Clear communication, planning, and management skills among team members and subgroups

Preferred Experience:

  • Spacecraft on orbit control and command
  • Spacecraft on orbit systems calibration
  • Debugging of on orbit anomalies


 
Job Number: 2010119168
Job Location: Mojave, CA
Duration: 36 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7pRQAS&URLSource=cjhunter

HVAC & Refrigeration Specialist

Description:
PDS Tech is seeking a Sr. HVAC Technician for an industrial/manufacturing facility. Please note, this position is located on Molokai.

Independently performs in a technical role focusing on assessments, scheduled preventative maintenance (PMs) and unscheduled maintenance, calibrations, troubleshooting, repairs and modifications to refrigeration and ventilation equipment and processes as assigned. Certified to operate mobile equipment and perform rigging. Incumbent provides technical refrigeration skills for daily operations, checkout/startup for electrical and instrumentation equipment within the operating facility while sharing knowledge with and training junior mechanics. This includes site areas of production, utilities, laboratories and facilities. Role is to become familiar with site HVAC infrastructure, maintain records thereof, consistently determine cause(s) of electrical equipment/instrumentation malfunctions, perform repair(s) and correct malfunction(s).

    • Support site infrastructure and capital projects including construction/commissioning of HVAC systems, cold rooms, and growth chambers.
    • Continuously maintain HVAC and refrigeration systems with the objective to improve system reliability, performance, and efficiency.
    • Perform HVAC and refrigeration infrastructure assessments and refrigeration equipment repairs.
    • Provide input and assistance developing and revising maintenance SOPs and JSAs.
    • Troubleshooting and repair of: HVAC, cold rooms, growth chambers, shop instrumentation, dust collection, and Building Automation Systems.
    • Maintain records of repair and maintenance of HVAC and refrigeration equipment to meet OSHA and company standards and guidelines.
    • Actively participates in ESH safety programs along with being able to actively identify and resolve hazards across the site while observing all company work and safety practices
    • Maintenance work performed by the incumbent assures the integrity of our infrastructure, facilities, and manufacturing processes as well as supports the flow of product from TPD-Kihei to the next. The incumbent takes leadership and responsibility for the maintenance of refrigeration and ventilation equipment. The incumbent must collaborate with the staff from several areas to coordinate the completion of all maintenance work required for a given time period. Access to areas and equipment must be scheduled and coordinated to minimize impact on the seasonal production schedule.This position requires detailed contact with team members including but not limited to: Supervision, Production, Engineering, Farm Management, and other Facilities Departments, especially during busy seasons, turnarounds, capital projects and large maintenance tasks.


  • HS Diploma or GED
  • Minimum 10 years of experience in HVAC and refrigeration maintenance or repair;
  • Valid driver’s license and ability to obtain a Class A or B CDL
  • Excellent problem-solving skills
  • Strong written and oral communication skills
  • Knowledge of safe tool use and shop practices
  • Able to work as part of a multidisciplinary team with a variety of partners
  • Experience with the operation of lifting and rigging equipment.
  • Knowledge of HVAC and refrigeration safety standards and codes including local, state, and federal requirements
  • Proficiency in CMMS/EAM software programs to facilitate maintenance record keeping, e.g. SAP or Maintenance Connection

 
Job Number: 2010117256
Job Location: Honolulu, HI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P1NcQAK&URLSource=cjhunter

HVAC & Refrigeration Specialist

Description:
Independently performs in a technical role focusing on assessments, scheduled preventative maintenance (PMs) and unscheduled maintenance, calibrations, troubleshooting, repairs and modifications to refrigeration and ventilation equipment and processes as assigned. Certified to operate mobile equipment and perform rigging. Incumbent provides technical refrigeration skills for daily operations, checkout/startup for electrical and instrumentation equipment within the operating facility while sharing knowledge with and training junior mechanics. This includes site areas of production, utilities, laboratories and facilities. Role is to become familiar with site HVAC infrastructure, maintain records thereof, consistently determine cause(s) of electrical equipment/instrumentation malfunctions, perform repair(s) and correct malfunction(s).

    • Support site infrastructure and capital projects including construction/commissioning of HVAC systems, cold rooms, and growth chambers.
    • Continuously maintain HVAC and refrigeration systems with the objective to improve system reliability, performance, and efficiency.
    • Perform HVAC and refrigeration infrastructure assessments and refrigeration equipment repairs.
    • Provide input and assistance developing and revising maintenance SOPs and JSAs.
    • Troubleshooting and repair of: HVAC, cold rooms, growth chambers, shop instrumentation, dust collection, and Building Automation Systems.
    • Maintain records of repair and maintenance of HVAC and refrigeration equipment to meet OSHA and company standards and guidelines.
    • Actively participates in ESH safety programs along with being able to actively identify and resolve hazards across the site while observing all company work and safety practices
    • Maintenance work performed by the incumbent assures the integrity of our infrastructure, facilities, and manufacturing processes as well as supports the flow of product from TPD-Kihei to the next. The incumbent takes leadership and responsibility for the maintenance of refrigeration and ventilation equipment. The incumbent must collaborate with the staff from several areas to coordinate the completion of all maintenance work required for a given time period. Access to areas and equipment must be scheduled and coordinated to minimize impact on the seasonal production schedule.This position requires detailed contact with team members including but not limited to: Supervision, Production, Engineering, Farm Management, and other Facilities Departments, especially during busy seasons, turnarounds, capital projects and large maintenance tasks.


  • HS Diploma or GED
  • Minimum 10 years of experience in HVAC and refrigeration maintenance or repair;
  • Valid driver’s license and ability to obtain a Class A or B CDL
  • Excellent problem-solving skills
  • Strong written and oral communication skills
  • Knowledge of safe tool use and shop practices
  • Able to work as part of a multidisciplinary team with a variety of partners
  • Experience with the operation of lifting and rigging equipment.
  • Knowledge of HVAC and refrigeration safety standards and codes including local, state, and federal requirements
  • Proficiency in CMMS/EAM software programs to facilitate maintenance record keeping, e.g. SAP or Maintenance Connection

 
Job Number: 2010117129
Job Location: Kaunakakai, HI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P0zmQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Helicopter Fuel System Integration Lead

Description:
This position is responsible for leading the integration effort of a helicopter fuel system. Includes coordination of integration efforts between internal client teams and external suppliers.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Mechanical/Electrical/Computer/Aerospace Engineering
* Mechanical Engineering background
* Hydromechanical Fuel/Lube System knowledge including pumps, LVDTs, pressure transducers, flow transducers, etc.
* Fuel/Control System Integration experience
* Supplier Management experience

PREFERRED SKILLS:
* Aircraft Engine Combustion knowledge

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

HighJump Developer/ Analyst, Nashville, TN 37214

Description:
PDS Tech is seeking a HighJump Developer/Analyst in Nashville 37214, TN for a 12-month contract. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
7 month contract with possible  extensions. 


POSITION SUMMARY: 
 5+ years experience

HighJump Developer/Seniors Analyst skills required to support Complex Troubleshooting, New Feature Requests and Project Work.

Candidate must have the following experience or knowledge.
Software
o Experience with HighJump's Development toolset (create Stored Procedures, SQL queries
o Develop HighJump Solutions in Warehouse Advantage, Yard Advantage, and Labor Advantage.
o MS SQL Server Management Studio
o SQL Server 2016 or newer development experience with exposure to enterprise level SQL Server environments (update Windows Task Scheduler,).
o Zebra Printer Setup Utilities
o Use of xml, flat files (FTP/SFTP), message queues, table to table communication


Below is nice to have and not mandatory:
o Troubleshoot and develop HighJump functionally using the of following peripherals/devices:
o Telnet Serverso Avalanche (Mobile Device Management Tool)

o Printers/Scanners o Handheld Devices
o App Servers, Web Servers, Print Servers
 

 
Job Number: 2010113638
Job Location: Nashville, TN
Per Diem: No
Duration: 7 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnEvQAK&URLSource=cjhunter

Implementation Consultant

Description:
What does a great Implementation Consultant do?
• Provide onboarding support to client institutions and processors to ensure customer expectations are exceeded.
• Coordinate directly with customers and multiple internal teams to understand card program set up requirements and facilitate new card program installations, conversions and maintenance requests without customer impact.
• Report customer project accomplishments and deliverables to management.
• Review and approve card program changes and trend opportunities for department development.
• Manage non-routine, complex processing and change requests.
• Act as the Project Lead for various initiatives - both internal and external - using Project Management best practices and skills.
• Proactively identify operational opportunities to increase service quality or efficiency.
• Build and enhance positive working relationships with key Fiserv client institutions, processors and internal stakeholders.
• Assess operational opportunities to increase service quality or efficiency.
• Prepare and maintain detailed project plans, status reports, and issues logs.
• Represent customer and operational requirements to internal Fiserv organizations.
• Responsible for own work flow assignments and must be able to take the initiative to resolve problems and meet deadlines.
• Coordinate internal Fiserv resources to ensure delivery on commitments.
• Performs other duties as required
 
Basic Qualifications for Consideration:
• Typically requires a minimum of 5-7 years’ experience in a customer support role in software, financial or information services.
• Must understand secure and non-secure card personalization requirements per industry standards.
• Excellent time management, organization, and planning skills are essential.
• Able to set priorities, influence others, and manage customer expectations.
• Demonstrated success in customer relationship management.
• Self-starter with a demonstrated ability to achieve results as part of an effective team, and ability to effectively prioritize and multi-task under deadlines.
• Excellent verbal, written, presentation and interpersonal skills are required.
• Strong project management skills required.

Preferred Skills, Experience, and Education:
• Bachelors/Degree or equivalent experience.
 
 
Job Number: 2010118758
Job Location: Chesapeake, VA
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6SwQAK&URLSource=cjhunter

Inventory Control Assistant

Description:
PDS Tech, Inc. is seeking a Lead Inventory Control Assistant

Records and maintains control of all inventory items purchased and produced. Identifies missing parts affecting production and develops plans to resolve issues. Ensures compliance with established internal control procedures
• 1-3 years of experience in a Manufacturing Plant environment.

• Warehousing/Inventory Control background with any Cycle Count experience

• Knowledge of SAP system or the ability to navigate through a manufacturing software system

• Intermediate Excel Skills

• Good Communication/Escalation skills

• Reliable with a desire to learn and develop with the position
 
Job Number: 2010118766
Job Location: Northford, CT
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Merritt
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6TfQAK&URLSource=cjhunter

Lead Electrical Systems Engineer

Description:
The scope of the position includes:
  • Working across programs, with a focus on XL-1 Moon Mission One
  • Coordinating with leadership team on staffing allocation and resources
  • Being a technical contributor to challenging engineering problems & having key input into the XL-1 design, build, and test
  • Providing engineering expertise and leadership
  • Providing mentorship and guidance to the technical team


Candidates filling this position will have strong skills with computer hardware and software. Beneficial to have strong skills in advanced mathematics and computer programming. Responsible for leading the team and assisting with the work to:

  • Develop hardware architecture
  • Select flight computers, solar panels, and power system hardware
  • Select/develop peripheral boards including support for 802.11ac, RS-422, Ethernet, CCSDS
  • Work with software team on board support packages
  • Ensure appropriate reliability and fault tolerance


  • Trajectory analysis
  • Guidance algorithms
  • Control laws
  • Kalman filters
  • Sensor fusion
  • Flight simulators
  • Optimization
  • Geodesy
  • Orbital mechanics
  • C, C++, Python, MATLAB
  • Navigation sensors (GPS, star trackers, LIDAR, IMU, etc.)
  • Systems engineering
  • Hands on test and integration


Professional Requirements:

  • Experience with spacecraft or launch vehicles and working on ambitious projects
  • Must be a “U.S. person” as defined by the ITAR (22 CFR §120.15)


 
Job Number: 2010119167
Job Location: Mojave, CA
Duration: 36 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7pHQAS&URLSource=cjhunter

Lead Embedded Software Engineer

Description:
PDS Tech Inc is seeking an Embedded Software Engineer in Camden, NJ

• Apply computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target hardware
• Work closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system
• Support and participate in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and formal test
• Develop software test plans and procedures, and other relevant technical documentation
• Utilize modeling tools and equipment to establish operating data, conduct experimental tests, prototype, and evaluate results
• Participate in peer reviews, identify, track and repair defects
• Utilize a variety of software languages (i.e., C++, C, Java, Python, Assembly) on Windows, Linux, mobile platforms, and embedded real time operating systems (VxWorks, Linux, Integrity, and others for Motorola, Intel, TI, and custom processor designs)
 
• Object-oriented design and implementation experience, with exposure to software modeling and UML
• Experience developing device drivers and Board Support Packages for real time embedded systems
• Experience with cryptography and cryptographic applications, security architecture, multi-level and cross domain security solutions, and certification requirements
• Hardware / Software Integration experience
• Experience debugging real time embedded applications
• Experience with static analysis, code coverage tools, and automated test frameworks
• Knowledge of network architectures and protocols
• Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field
• U.S. citizenship and the ability to obtain and maintain a Department of Defense (DoD) SECRET clearance, TS/SCI highly desirable
• Related coursework or experience developing software for embedded applications
• Excellent oral and written communication skills
 
 
Job Number: 2010119640
Job Location: Camden, NJ
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P95eQAC&URLSource=cjhunter

Lead Embedded Software Engineer

Description:
PDS Tech Inc is seeking an Embedded Software Engineer in Camden, NJ

• Interfacing and coordinating with all engineering development disciplines, project engineering and program management
• Oversee formal design and test reviews, prepare and present technical briefings, report project status
• Guide team members on the application of computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target hardware
• Hands-on leadership in the development and evaluation of interfaces between hardware and software, and operational performance requirements and design of the overall system
• Lead and contribute to all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and formal test
• Develop software test plans and procedures, and other relevant technical documentation
• Utilize modeling tools and equipment to establish operating data, conduct experimental tests, prototype, and evaluate results
• Participate in peer reviews, identify, track and repair defects
• Utilize a variety of software languages (i.e., C++, C, Java, Python, Assembly) on Windows, Linux, mobile platforms, and embedded real time operating systems (VxWorks, Linux, Integrity, and others for Motorola, Intel, TI, and custom processor designs)
 
• Object-oriented design and implementation experience, with exposure to software modeling and UML
• Experience developing device drivers and Board Support Packages for real time embedded systems
• Experience with cryptography and cryptographic applications, security architecture, multi-level and cross domain security solutions, and certification requirements
• Hardware / Software Integration experience
• Experience debugging real time embedded applications
• Experience with static analysis, code coverage tools, and automated test frameworks
• Knowledge of network architectures and protocols
• Knowledge of communication and security related protocols (including but not limited to UDP, TCP, RTP, SRTP, VoIP, X.509 and SSL/TLS).
• Experience developing software using processes compliant with CMMI Level 3 or above
• Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field
• U.S. citizenship and the ability to obtain and maintain a Department of Defense (DoD) SECRET clearance, TS/SCI highly desirable
• 6+ years experience developing software for embedded applications
• Demonstrated ability leading small to medium sized software development teams through all phases of the software development lifecycle
• Excellent oral and written communication skills
 
 
Job Number: 2010118995
Job Location: Camden, NJ
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7GmQAK&URLSource=cjhunter

Lead GNC Engineer--remote work optional

Description:
Remote work is an option.

The scope of the position includes:

  • Working across programs, with a focus on XL-1 Moon Mission One
  • Coordinating with leadership team on staffing allocation and resources
  • Being a technical contributor to challenging engineering problems & having key input into the XL-1 design, build, and test
  • Providing engineering expertise and leadership
  • Providing mentorship and guidance to the technical team


Candidates filling this position will have strong skills with computer hardware and software. Beneficial to have strong skills in advanced mathematics and computer programming. Responsible for leading the team and assisting with the work to:

  • Develop hardware architecture
  • Select flight computers, solar panels, and power system hardware
  • Select/develop peripheral boards including support for 802.11ac, RS-422, Ethernet, CCSDS
  • Work with software team on board support packages
  • Ensure appropriate reliability and fault tolerance


  • Trajectory analysis
  • Guidance algorithms
  • Control laws
  • Kalman filters
  • Sensor fusion
  • Flight simulators
  • Optimization
  • Geodesy
  • Orbital mechanics
  • C, C++, Python, MATLAB
  • Navigation sensors (GPS, star trackers, LIDAR, IMU, etc.)
  • Systems engineering
  • Hands on test and integration


Professional Requirements:

  • Experience with spacecraft or launch vehicles and working on ambitious projects
  • Must be a “U.S. person” as defined by the ITAR (22 CFR §120.15)


 
Job Number: 2010119144
Job Location: Mojave, CA
Duration: 36 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7mhQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer

Description:
804 Technology is currently looking for an Aerospace Logistics Engineer for a long term contract job opportunity located in Fort Worth TX. Aero Logistics Engineer focuses on the analysis and technical coordination to develop affordable and supportable military systems for Bell aircraft. The position is responsible for supporting the development of support systems within the IPTs.
These support system resources include:
• Level of Repair Analysis(LORA),
• Reliability Centered Maintenance (RCM),
• Failure Mode Effect & Critical Analysis (FMECA),
• Provisioning/Supply Support,
• Task/Maintenance Plan Analysis,
• Interactive Electronic Technical Manuals (IETM),
• Paper-based manuals, Illustrated Parts Breakdowns (IPB),
• Support Equipment,
• PHS&T, and Repair Parts and Special Tool List (RPSTLs),
• Industry MIL-STD documents and manuals, which span across multiple aircraft platforms, modifications, and development programs.
My contact information is listed below. If you are interested please respond be sending me your resume and your availability. Salary is based on experience and Per Diem is available to those that qualify. Thank you in advance for your time.

Brian Smith
314-753-5299
bsmith@804technology.com
Description/Comment: Aero Logistics Engineer focuses on the analysis and technical coordination to develop affordable and supportable military systems for Bell aircraft. The position is responsible for supporting the development of support systems within the IPTs.
These support system resources include:
• Level of Repair Analysis(LORA),
• Reliability Centered Maintenance (RCM),
• Failure Mode Effect & Critical Analysis (FMECA),
• Provisioning/Supply Support,
• Task/Maintenance Plan Analysis,
• Interactive Electronic Technical Manuals (IETM),
• Paper-based manuals, Illustrated Parts Breakdowns (IPB),
• Support Equipment,
• PHS&T, and Repair Parts and Special Tool List (RPSTLs),
• Industry MIL-STD documents and manuals, which span across multiple aircraft platforms, modifications, and development programs.

This position focuses on the design of inherent supportability into the analysis and the associated design, analysis and optimization of the customers' military support system.

Position Responsibilities:
• Demonstrates a working knowledge and the requisite skill sets to work within the IPT/organization.
• Performs all assigned tasks to an acceptable quality standard with minimal supervision.
• Compliant to company processes, procedures, and applicable government regulations.
• Support and assist in data preparation and presentation for program reviews and perform other work as directed.
• Perform to a set of performance metrics and measurements that give visibility to cost and schedule objectives.
• Performs other duties as required.

Education Requirements:
High School diploma or equivalent. Bachelor's Degree is preferred.

Position Requirements:
• Experience in Military logistics and/or experience in aviation logistics preferred.
• Must have strong analytical skills.
• Must be experienced with the Microsoft software suite.
• Must have excellent communication skills.

I am currently working remotely. You can reach me in a variety of ways:
Be safe and stay healthy out there. We are in this together!

Brian Smith
Email: bsmith@804technology.com
Cell: 314-753-5299
Business: 636-928-0330 (forward message to my email)
Fax: 636-928-0348

Brian Smith
804 Technology
Recruiting Director
O. 636-928-0330
F. 636-928-0348
C. 314-753-5299
bsmith@804technology.com
www.804technology.com

804 Technology is an equal opportunity employer.
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
 
Job Number: 804 Logistics
Job Location: Fort Worth, TX
Rate: 40-50/hour
Per Diem: Split
Overtime: Possible
Duration: 9 mos plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Brian Smith
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

Machine Programmer-Brake Press/Laser

Description:
Write programs or nesting for various fabrication machines including Brake Press, Laser, etc. Inform appropriate personnel of mistakes on or clarifications required on drawings or routing changes for process improvements.
 Essential Job Functions:
·Create programs and nesting daily for miscellaneous fabricating machines by material type per the MRP schedule.
·Ability to make process and productivity improvements while performing duties.
·Ensure downstream operations have required parts when required.
·Needs to have an understanding of basic laser and operation and brake press operation.
·Ability to read and interpret blueprints and weld symbols.
·Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
·Ability to add, subtract, multiply, and divide in all unites of measure, using whole number, common fractions, and decimals and ability to compute rate, ratio, and percent.
·Ability to understanding to carry out instructions furnished in written, oral or diagram form.
·Ability to deal with problems involving several concrete variables in standardized situations.
·Review job order, CAD drawings, or specs, understand tool paths, and analyze data for calculations/critical paths.
 
Previous experience working with or programming brake press and laser.
Knowledge of database software; inventory software; manufacturing software; and spreadsheet software.
Use of the AS400 computer system
Use of Auto CAD or Solidworks.
1st shift position

 
Job Number: 2010113589
Job Location: Clintonville, WI
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003On27QAC&URLSource=cjhunter

Many New Long Term Aerospace Programs in Missouri

Description:
Stress Engineers: either metallics or composites (secret and non-secret)

Structural Designers: must be degreed and have UG NX experience

Electrical Design Engineers: must be degreed and have UG NX experience

Liaison/MRB Engineers: military or commercial background, MRB authority, degree from ABET accredited university

Tool Designers: UG NX background, aerospace or aircraft background

Aircraft Systems Engineers: systems engineers with avionics or software; DOORS or Rhapsody experience needed

Software Engineers: Ada, C++; avionics experience a plus

System Design Engineers: ECS, hydraulics and pneumatics, landing gear, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer- NX

Description:
Sr. Mechanical Designer

Summary of Job Description:

The Senior Mechanical Designer will be working under the direction of the Systems Engineer and Mechanical Engineers, the Designer will create 3-D CAD models and assemblies in support of proper design at the component or subsystem level. The Designer will also work collaboratively with other Designers on the program to ensure best practices of solid modeling are properly implemented in the design and development of vehicle transportation systems for Military applications. The Designer will also work closely with the assigned Engineer in the completion of the drawing package.

Job Requirements:

Provide 3D design support utilizing Siemens NX Solid Modeling Software (2-3 years exp min)
New Product Design Experience
Experience with design of vehicle suspension systems
Experience with steering axles and Trunnion Suspension experience are a bonus
Siemens NX Drawing development/creation
Experience developing vehicle transport systems a plus
Job Requirements:

Positions is based in Florence KY
 
Job Number: 8677
Job Location: Florence, KY
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Mechanical Test Engineer

Description:
PDS Tech is seeking a Mechanical Test Engineer in Windsor Locks, CT
 
The ideal candidate will Design, Implement, and Maintain Test Processes for Space Systems hardware using lean philosophies and techniques.
 
They will take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
 
This can involve testing, data analysis, and interfacing with all aspects of the engineering department.
 
Duties / Responsibilities include:
  • Interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
  • Daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
  • Supporting laboratory testing of Space Station hardware,
  • Developing and validating tooling concepts,
  • Authoring and maintaining operation/test procedures,
  • Preparing standardized operation/test sheets,
  • Defining Test Rig and Facility requirements,
  • Participating in Program Integrated Product Development teams,
  • Reviewing drawings and concepts, and
  • Resolving Producibility concerns.


 
Requirements:
  • Experience with advanced instrumentation and data acquisition systems
  • A minimum of five (5) years working on the testing of complex mechanical systems and components such as, heat exchangers, pumps, fans, & accumulators.
  • Capability of working independently and be self-motivated.
  • Excellent communication skills, written and verbal
  • Ability to proficiently operate common Microsoft Office software products

Desired Skills:

  • Knowledge of LabVIEW


  • Will accept someone with 2+ years experience up to and including 25+ years experience.

Education:

  • Bachelors

 
Job Number: 2010112064
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fl9JQAQ&URLSource=cjhunter

Microsoft Office 365/SharePoint Support Analyst

Description:
Purpose and Scope: 

Under direct supervision, formulate and define systems scope and objectives through user needs and an understanding of business systems and industry requirements.

Essential Responsibilities:
  1. Respond to user support requests regarding the following topics: creating and customizing SharePoint site collections, sites, lists or libraries, forms, workflows, metadata, user access and experience. Design, develop and provide training for customized solutions. Will work closely with business operations to ensure solutions answer their needs and solve their problems. Prioritize and maintain commitments and delivery dates for multiple projects and customers, simultaneously. Development and maintenance of technical design artifacts and requirements documentation.
    Communication with clients as required: keeping them informed of project progress, impending changes, and agreed upon outages. Interpret and discuss information with others and regularly provide advice and recommend actions involving complex issues. Demonstrate professional attitude with client over the phone, on-site and through emails to resolve all client requests/questions.
    US Citizenship Required.
    Must be able to work independently, strong remote worker skills. Occasional travel may be required. 
    Desired Knowledge/Skills:
  2. SharePoint 2016+, specifically custom site configuration and user support
  3. SharePoint site customization, design and delivery
  4. SharePoint Forms and Workflow; InfoPath and SharePoint Designer
  5. Troubleshooting and Issue Analysis
  6. Customer Service Focus
  7. Clear and effective communicator, verbal and written
  8. Ability to work independently and a strong desire for personal and professional development
  9. Ability to identify and evaluate trends in industry best practice policies

  • Bachelor’s degree in Computer Science or related field or equivalent.
  • Excellent communications and analytical skills
  • Demonstrated working knowledge and extensive experience in SharePoint and related software, such as InfoPath and SharePoint Designer
  • Position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
  • Position may require travel.

Position may require the ability to pass and maintain a Security Clearance.
 
Job Number: 1910107369
Job Location: San Antonio, TX
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMf1QAE&URLSource=cjhunter

Model Based Systems Engineering

Description:
PDS Tech Inc is seeking a Model Based Systems Engineer in Annapolis, MD

***Must be US Citizen***

***Active Secret Clearance required***

MBSE provides an approach and process to model the necessary system engineering products needed to align a system through its programmatic lifecycle by enabling a digital thread of data to describe a system and its environment, expected behavior, functional definition and allocation, product definition, integration and assembly, and test and evaluation.  The ideal candidate possess an engineering background combined with experience in conceptual development, system architecture and/or design, and software or mathematical modeling, as well as knowledge background in object-oriented software design methodologies and the ability to manage inputs from a set of multiple and diverse stakeholders to support understanding of system components, interfaces, and their traceability.


 
Basic Qualifications:
- Bachelor’s degree in a STEM discipline (Science, Technology, Engineering, Math) with 3 years of related professional experience or a Master's degree with at least 1 years of related experience.
- Must be able to obtain and maintain a U.S. Government Secret security clearance (U.S. citizenship is a pre-requisite).
- Familiarity with systems engineering processes and methodologies including CONOPS and use case definition, architecture definition and design, requirements development and allocation, integration and test, and verification and validation.
- Experience in Systems Modeling Language (SysML) or Unified Modeling Language (UML).
- Knowledge of software programming languages and databases and the ability to apply to software domain.
- Experience in mathematical modeling and/or object-oriented software design methodologies.

Preferred Qualifications:
- Detailed experience in systems engineering process and application of model-based concepts to system processes
- Detailed experience in architecture and system design development including definition of the functional and product baselines
- Detailed knowledge of MBSE frameworks, including UAF, DODAF, MODAF, NAF, Zachman, and TOGAF, as well as language implementations including UPDM, BPMN, SysML, and UML.
- Knowledge of general and real-time software development and testing tools, capability and usage. Real-time tool examples include cross compliers, target debuggers and test/performance instrumentation.
- Knowledge of real-time target environments, including processor and network architectures, communication protocols, simulation frameworks and electrical interfaces.
 
 
Job Number: 1910104846
Job Location: Annapolis, MD
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUyGQAW&URLSource=cjhunter

Monitoring Engineer-Splunk

Description:
Monitoring Engineer
Become part of the Enterprise Service Delivery Monitoring Engineering team contributing to projects in support of ongoing integration activities within Fiserv Technology Services (FTS).

The role is responsible for monitoring engineering across the enterprise by implementing instrumentation for applications, using varying technology stacks, with Fiserv’s approved standard set of monitoring tools such as Splunk, CA APM, AppDynamics, Dynatrace, Extrahop, ASM, SiteScope, Thousand Eyes etc.

The monitoring solutions need to enable the operations teams to proactively identify and remediate issues for various ongoing integration activities. Implement monitoring in a complex environment consisting of various technologies, using a wide range of monitoring solutions such as dashboarding, alerting, custom solutions as needed to ensure the operations teams can monitor the health of the applications across the organization.

Additional responsibilities include automating the onboarding process to eliminate manual processes and create dashboards / reports to help technology / business leadership and integration teams understand customer impact and root cause during an incident.

As a Splunk Data Administrator / Splunk Developer / APM tools expert / NPM tools expert improve customer experience by implementing Dashboards / Alerts to reduce time to detect, investigate and resolve. Work closely with Leadership team, Enterprise Architects, Technical leads, Developers, Product owners, Account Executives, Operation teams to build and implement end to end Monitoring Solutions for integration activities.

Responsibilities:
• Onboard new log files in Splunk
• Instrument applications with APM tools like CA APM, AppDynamics and Dynatrace
• Develop Synthetic monitoring scripts in CA ASM, SiteScope, Thousand eyes
• Onboard Applications with Application Network Performance Monitoring tools like Extrahop
• Develop end to end monitoring dashboards, alerts and reports in Splunk, Extrahop, CA APM, AppDynamics, Thousand eyes …etc. as applicable.
• Develop monitoring both on-premise and cloud applications.
• Work on Extracting, Transforming, Analyzing, Visualizing, and presenting data from diverse business areas.
• Develop Splunk queries and dashboards targeted at understanding application performance and capacity analysis.
• Design and customize complex search queries and optimize performance of the queries used in dashboards and alerts.
• Automate manual processes using scripting languages (e.g. Unix Shell, PowerShell, Python, Perl …etc.).
• Collect the requirements from SME’s, breakdown the application architecture, analyze monitoring requirements and create specific tasks for the junior members of the team.
• Educate internal customers on the tools and available dashboards, so that they can effectively use to reduce downtime and root cause analysis.
 
Responsibilities:
• Onboard new log files in Splunk
• Instrument applications with APM tools like CA APM, AppDynamics and Dynatrace
• Develop Synthetic monitoring scripts in CA ASM, SiteScope, Thousand eyes
• Onboard Applications with Application Network Performance Monitoring tools like Extrahop
• Develop end to end monitoring dashboards, alerts and reports in Splunk, Extrahop, CA APM, AppDynamics, Thousand eyes …etc. as applicable.
• Develop monitoring both on-premise and cloud applications.
• Work on Extracting, Transforming, Analyzing, Visualizing, and presenting data from diverse business areas.
• Develop Splunk queries and dashboards targeted at understanding application performance and capacity analysis.
• Design and customize complex search queries and optimize performance of the queries used in dashboards and alerts.
• Automate manual processes using scripting languages (e.g. Unix Shell, PowerShell, Python, Perl …etc.).
• Collect the requirements from SME’s, breakdown the application architecture, analyze monitoring requirements and create specific tasks for the junior members of the team.
• Educate internal customers on the tools and available dashboards, so that they can effectively use to reduce downtime and root cause analysis.


Basic Qualifications:
• Bachelor’s degree in Computer Science, a related technical or scientific field, or equivalent experience.
• 7+ years of scripting or software development experience.
• 7+ years of experience with large-scale financial systems architectures.
• 7+ years of implementing monitoring and performance engineering experience.
• 5+ years of experience in using Splunk, CA APM, AppDynamics, Dynatrace, Application Network Performance monitoring tools, ASM, SiteScope.
• 5+ years demonstrated ability to work successfully in a fast paced, cross functional team environment.
Certifications
• Splunk 7.x or above Power User Certification.
• Splunk 7.x or above Admin certification
 
 
Job Number: 2010119617
Job Location: Alpharetta, GA
Duration: 15 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P92fQAC&URLSource=cjhunter

Network Engineer IV

Description:
PDS Tech, Inc. is seeking a VoIP Engineer , in Dallas, TX.

BASIC FUNCTION:
Conducts expert level technical communications assignments and projects for the Information Technology Department under minimal supervision. Directs or leads the work of others.

ESSENTIAL JOB DUTIES/RESPONSIBILITIES: (functions considered essential as defined by ADA)
  • Provides expert level technical support for complex to highly complex Voice over IP (VoIP), voicemail and network systems
  • Provides VoIP and network incident and problem management
  • Conducts VoIP and network communications studies, proposal generation, and system implementation
  • Provides VoIP capacity, configuration, and performance management of internal and external networks traversing both Cisco and Juniper platforms
  • Consults with company’s management and staff, providing VoIP, network, and telecommunications systems administration and maintenance, including creating and maintaining disaster recovery plans
  • Works closely with service providers, both terrestrial and wireless, to report trouble and enable speedy resolution to functional problems and system outages
  • Generates and updates documentation on operational procedures, VoIP network topology, and network databases , i.e., LIDB
  • Works closely with other Network Analysts and Engineers to solve issues with network security, wireless devices, routing principles and other network incidents.
  • Coordinates software, hardware and system installations and changes with vendors
  • Writes clear, concise, and accurate documentation and provides training as required
  • Tests and evaluates VoIP and networks systems to eliminate problems and make improvements in development, quality assurance, and production environments
  • Recommends upgrades, patches, and new applications and equipment
  • Completes special assignments and/or tasks assigned based on needs of the business
  • As needed, relocates technical equipment to and from an assigned location
  • Manages Mobile Device Management Platform and Application Integration
  • Responsible for maintain a secure VoIP Platform
  • Designs, provisions, and implements VoIP Session Initiation Protocol (SIP) Architecture

Special assignments or tasks assigned to the employee by their superior, as determined from time to time in their sole and complete discretion.
 
Experience :


EXPERIENCE:
A minimum of 8 years of job related experience required including a minimum of five years VoIP coupled with five years Network Architecture/Design inclusive of routing, switching load balancing, firewalls, and virtual private networking (VPN) experience is required.

EDUCATIONAL LEVEL:
A minimum of a Bachelor’s Degree or equivalent work experience is required.

REQUIRED SKILLS:
  • Ability to apply advanced knowledge of VoIP applications and systems to include an expert level understanding of Cisco VoIP Technologies and platforms; namely Cisco Call Manager, Cisco Unified Contact Center Express, Unity and general understanding of IVR functionality.
  • Ability to apply advanced knowledge of layers 1-7 of the OSI model, including an expert level understanding of VOIP and networking technologies and platforms.
  • An in-depth knowledge of network security, wireless devices, routing principles and network architecture as these technologies apply to Voice over IP (VoIP).
  • General knowledge of networking components inclusive of applications layer firewall, firewalls, load balancing, routers, switches and virtual private networking (VPN).
  • A general understanding of voice, video, and data (VVD), including the functionality of protocols supporting VVD.
  • Advanced working knowledge of information systems concepts/design/development, systems development life cycle, recovery techniques, performance monitoring and tuning. Advanced decision-making, analytical, and problem solving, conceptual and data analysis skills.
  • Ability to perform intermediate mathematical calculations, coupled with strong interpersonal skills and ability to effectively communicate with others, both written and verbal communication.
  • Ability to lead and supervise the work of others and maintain professional relationships with the vendor community.
  • Advanced reading and writing skills.


PREFERRED SKILLS:
Certifications in CCNA-Voice, JNCIA, JNCIS, and/or JNCIP, Cisco and Juniper certifications with hands-on or Network Operation Center experience is preferred.

SUPERVISORY/MANAGERIAL RESPONSIBILITIES:
Directs or leads the work of others as needed and/or acts as team lead on projects.

WORK CONDITIONS:
Office based with travel up to 40% of the time by land and air is required. Petroleum refinery, warehouse/plant environment, and out-of-door environment including but not limited to chemicals, pressure vessels, tanks, rotating equipment, working in confined spaces, fumes, airborne participles, and exposure to the risk of electrical shock. Subject to all temperatures, weather, and varying road conditions.

PHYSICAL REQUIREMENTS:
Job conditions require standing, walking, sitting, twisting, stooping, crouching, kneeling, talking or hearing, making visual inspections, making precise hand and finger movements, reaching or grasping, ability to operate and drive all assigned company vehicles at company standard insurance rates is essential, valid State driver’s license and proof of insurance, perceiving color differences, ability to wear personal protective equipment (beards not permitted). Job conditions may require lifting and/or carrying up to 50lbs, pushing and/or pulling up to 50 lbs, and climbing up to 15 ft.

ENVIRONMENTAL, HEALTH, & SAFETY RESPONSIBILITIES:
Our primary values are: We put health and safety first; We care about the environment.
All employees are expected to work safely every day and be safety & environmental leaders. This includes active participation in the following:
• Stops and/or reports any unsafe work or conditions
• Follows safety & environmental policies and procedures
• Supports safety & environmental goals and initiatives
• Participates in safety & environmental meetings, training, emergency drills and hazard recognition programs
• Reports all accidents, injuries and near misses, and participates in associated investigations
• Participates in industrial hygiene, medical surveillance and behavior based safety programs


 
Job Number: 2010116555
Job Location: Dallas, TX
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OylfQAC&URLSource=cjhunter

Network Planning Engineer, Specialist

Description:
Chipton-Ross is seeking a Network Planning Engineer, Specialist (Level 3) for an opening in Camden, NJ.

RESPONSIBILITIES:
Conducts network architecture design, feasibility and modeling. Designs, analyzes, plans, and modifies network components and/or software by translating customer requirements and objectives into final product design. Develops and evaluates network performance criteria and measurement methods. Prepares the analysis of the short-term or long-term capacity needs for switching, routing transmission and signaling.

Lead the development of mission-critical, near-real-time, military/intelligence networks ranging from the tactical edge to strategic core
Conduct engineering system development tasks including system requirements analysis, system architecture and design, preliminary design, critical design, system integration, formal verification, formal validation, and fielding support.
Decompose high-level business and system requirements into smaller detailed tasks to facilitate low-level network design. Interpret, Allocate, and Derive project requirements into design specifications.
Perform Requirements Analysis using DOORS, UML, Model-Based Systems Engineering, and other system engineering practices.
Research, design, and test complex wide-area computer networks to include both hardware and software. Hardware includes, but is not limited to, routers, switches, servers, inline encryptors, and modems.
Evaluate and identify new technologies for implementation
Participate on design teams for computing infrastructure, primarily as a computer network designer or architect.
Participate in product selection, recommendation, design, deployment, integration and test.
Investigate, develop and design the network architecture and assist the software application and development effort as it relates to the computing architecture.
Configure Cisco Switches, Network Test, Network Security, Network Analyzer, Network Management systems
Provide technical support to the Manufacturing Floor during first article fabrication, engineering change incorporation and replacement of obsolete components.
Produce technical documentation in support of engineering solutions that include, but are not limited to, architectural drawings, detailed design specifications, and thorough implementation instructions.
Troubleshoot networking or design problems.
Supports on-ship installation, troubleshooting, and system validation
Review, recommend, and write updates to technical documentation in support of the US Navy.
Maintain standards compliance
Supports Cybersecurity analysis and documentation of large networked systems
Develops, updates, and maintains program of record documentation.

REQUIRED EXPERIENCE:
4 + years related network design experience of mission-critical military/intelligence networks. Associated experience with Switching, Routing, Network Test/Troubleshooting, Network Security, Network Analysis.
Ability to prepare briefings and technical reports. Must demonstrate excellent oral and written communication.
Multiple engagements/experience with Systems Engineering discipline, process, and protocols. Ability to conceptualize, architect, design and specify complex Command, Control, Communications, Computers, Cyber and Intelligence (C5I) Systems
Ability to decompose, define and document system performance requirements and associated key measurements of effectiveness.
This position requires an advanced understanding of networking protocols, appropriate for mission-critical, near-real-time, military/intelligence networks. These include, but are not limited to:
o Transmission Control Protocol/Internet Protocol (TCP/IP)
o Simple-Network Management Protocol (SNMP)
o Open Shortest Path First (OSPF)
o Border Gateway Protocol (BGP) routing protocols.
o Transmission Layer Security (TLS)
o Virtual Private Networks (VPNs)
A thorough understanding of all phases of network design is required.
Cisco certification at the Associate level or above (e.g., CCNA)
Experience with leading large/complex network projects and a successful history of task accomplishment
Expertise with Network Architecture, Modelling, and Simulation tools.
Excellent computer skills with strong proficiency in Windows interface, Microsoft Office package (Outlook, Excel, Word, PowerPoint, Project, Access, Visio).
Working knowledge of project management systems
Familiarity and working knowledge of cost-based accounting systems.
Windows and Linux administration expertise

PREFRRED EXPERIENCE:
A masters' degree in Computer Science, Computer Engineering, and/or Electrical Engineering is desired or equivalent experience; advanced degrees (MS, PhD) desired. Computer Science, Computer Engineering, and/or Electrical Engineering degrees preferred.
Candidates should possess at least one (1) security certification that is Cyber Security Workforce (CSWF) compliant (e.g., CISSP)
Cisco certifications at the professional or expert level (e.g., CCNP, CCIE)
Effective time and project management skills
Experience/understanding of network design practices/processes specific to Naval Information Warfare Center Pacific is desirable.
Six years minimum technical experience designing Automated Digital Network System (ADNS) or similar networks.
Six years minimum of technical experience installing and validating Automated Digital Network System (ADNS) or similar networks.
Six years experience acting as technical lead in large-scale Automated Digital Network System (ADNS) or similar networks.
Hands-on experience administrating, installing, and troubleshooting ADNS on board US Navy Ships or US Navy Network Operations Centers.
Three (3) years' experience programming networks utilizing Software Defined Networking techniques.
C/C++/JAVA/HTML/PYTHON and similar application software and scripting language competence
Cybersecurity/Risk Management Framework Accreditation Experience
Model-Based Systems Engineering Experience

EDUCATION:
Accredited B.S. in Electrical Engineering, Computer Science/Engineering, Mathematics, Physics or equivalent. 3.0 GPA or greater required.

WORK HOURS:
9/80
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 187383
Job Location: Camden, NJ
Rate: Up to $60.65 DOE
Duration: 12 Months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Network Planning Engineer, Specialist

Description:
PDS Tech, Inc. is seeking a Cybersecurity Systems Engineer in Camden, NJ.

Major purpose:
Conducts network architecture design, feasibility and modeling. Designs, analyzes, plans, and modifies network components and/or software by translating customer requirements and objectives into final product design. Develops and evaluates network performance criteria and measurement methods. Prepares the analysis of the short-term or long-term capacity needs for switching, routing transmission and signaling.

Major functions:
  • Lead the development of mission-critical, near-real-time, military/intelligence networks ranging from the tactical edge to strategic core
  • Conduct engineering system development tasks including system requirements analysis, system architecture and design, preliminary design, critical design, system integration, formal verification, formal validation, and fielding support.
  • Decompose high-level business and system requirements into smaller detailed tasks to facilitate low-level network design. Interpret, Allocate, and Derive project requirements into design specifications.
  • Perform Requirements Analysis using DOORS, UML, Model-Based Systems Engineering, and other system engineering practices.
  • Research, design, and test complex wide-area computer networks to include both hardware and software. Hardware includes, but is not limited to, routers, switches, servers, inline encryptors, and modems.
  • Evaluate and identify new technologies for implementation
    Participate on design teams for computing infrastructure, primarily as a computer network designer or architect.
  • Participate in product selection, recommendation, design, deployment, integration and test.
  • Investigate, develop and design the network architecture and assist the software application and development effort as it relates to the computing architecture.
  • Configure Cisco Switches, Network Test, Network Security, Network Analyzer, Network Management systems
  • Provide technical support to the Manufacturing Floor during first article fabrication, engineering change incorporation and replacement of obsolete components.
  • Produce technical documentation in support of engineering solutions that include, but are not limited to, architectural drawings, detailed design specifications, and thorough implementation instructions.
  • Troubleshoot networking or design problems.
  • Supports on-ship installation, troubleshooting, and system validation
  • Review, recommend, and write updates to technical documentation in support of the US Navy.
  • Maintain standards compliance
  • Supports Cybersecurity analysis and documentation of large networked systems
  • Develops, updates, and maintains program of record documentation.

Education/Experience/Licenses etc.:          
Required Education and Experience:
  • B.S. in Electrical Engineering, Computer Science/Engineering, Mathematics, Physics or equivalent. 3.0 GPA or greater required.
  • Must be able to obtain and maintain a DoD Secret or higher security clearance.
  • 4 + years related network design experience of mission-critical military/intelligence networks. Associated experience with Switching, Routing, Network Test/Troubleshooting, Network Security, Network Analysis.
  • Ability to prepare briefings and technical reports. Must demonstrate excellent oral and written communication.
  • Multiple engagements/experience with Systems Engineering discipline, process, and protocols. Ability to conceptualize, architect, design and specify complex Command, Control, Communications, Computers, Cyber and Intelligence (C5I) Systems
  • Ability to decompose, define and document system performance requirements and associated key measurements of effectiveness.
  • This position requires an advanced understanding of networking protocols, appropriate for mission-critical, near-real-time, military/intelligence networks. These include, but are not limited to:
  • Transmission Control Protocol/Internet Protocol (TCP/IP)
  • Simple-Network Management Protocol (SNMP)
  • Open Shortest Path First (OSPF)
  • Border Gateway Protocol (BGP) routing protocols.
  • Transmission Layer Security (TLS)
  • Virtual Private Networks (VPNs)
  • A thorough understanding of all phases of network design is required.
  • Cisco certification at the Associate level or above (e.g., CCNA)
  • Experience with leading large/complex network projects and a successful history of task accomplishment
  • Expertise with Network Architecture, Modelling, and Simulation tools.
  • Excellent computer skills with strong proficiency in Windows™ interface, Microsoft Office™ package (Outlook®, Excel®, Word®, PowerPoint®, Project®, Access®, Visio®).
  • Working knowledge of project management systems
  • Familiarity and working knowledge of cost-based accounting systems.
  • Windows and Linux administration expertise


Desired:

  • A masters' degree in Computer Science, Computer Engineering, and/or Electrical Engineering is desired or equivalent experience; advanced degrees (MS, PhD) desired. Computer Science, Computer Engineering, and/or Electrical Engineering degrees preferred.
  • Candidates should possess at least one (1) security certification that is Cyber Security Workforce (CSWF) compliant (e.g., CISSP)
  • Cisco certifications at the professional or expert level (e.g., CCNP, CCIE)
  • Effective time and project management skills
  • Experience/understanding of network design practices/processes specific to Naval Information Warfare Center Pacific is desirable.
  • Six years minimum technical experience designing Automated Digital Network System (ADNS) or similar networks.
  • Six years minimum of technical experience installing and validating Automated Digital Network System (ADNS) or similar networks.
  • Six years experience acting as technical lead in large-scale Automated Digital Network System (ADNS) or similar networks.
  • Hands-on experience administrating, installing, and troubleshooting ADNS on board US Navy Ships or US Navy Network Operations Centers.
  • Three (3) years' experience programming networks utilizing Software Defined Networking techniques.
  • C/C++/JAVA/HTML/PYTHON and similar application software and scripting language competence
  • Cybersecurity/Risk Management Framework Accreditation Experience
  • Model-Based Systems Engineering Experience



 
 
Job Number: 2010118698
Job Location: Camden, NJ
Duration: 11 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P6KrQAK&URLSource=cjhunter

Network Security Specialist - Top Secret

Description:
PDS Tech, Inc. is seeking a STE Cyber Security Network Specialist for the BT&E Space Systems Test organization in El Segundo, CA.

Responsibilities
Responsible for the hardening, deployment, setup, and readiness of network for Special Test Equipment in factory and launch environments.

Position Responsibilities

  • Scan for vulnerabilities, implement mitigations, install, administer, and troubleshoot on the following operating systems:
  • Microsoft Windows XP, Microsoft Windows 7, Microsoft Windows 10,
  • Microsoft Server software from the same eras of Windows above
  • Multiple Linux distros
  • Oracle Solaris (UNIX)Desired familiarity with a variety of services and protocols including:
  • NFS and CIFS network data, SAMBA
  • NIS, DNS, NTP, SMTP, SNMP, SSH, SFTP, VPN’s
  • Active Directory, LDAP, Firewalls
  • RAID storage
  • Backup methodologies, disaster recovery
  • HTTP/HTTPS (typically Apache and IIS)
  • High level DBA skills (install, start, stop, etc): SQL Server and MySQL
  • Basic familiarity with HP/Agilent, etc. instruments and the ability to set up communications (Ethernet and GPIB)Programming skills:
  • UNIX/Linux shell scripts (C, Bourne, BASH)
  • Python script language

This position requires
  • An active Top Secret (TS/SCI) US Security Clearance and a current Single Scope Background Investigation (SSBI).


(A U.S. Security Clearance that has been active in the past 24 months is considered active.)


  • Single Scope Background Investigation and 8570 Level II Certification (e.g. CompTIA Security+, CompTIA CySA+, etc.)

Education / Experience

  • Bachelor's Degree or higher from an accredited course of study in engineering, computer science, mathematics, physics or chemistry.
  • Education/experience typically acquired through advanced technical education and typically 9 or more years' related work experience or an equivalent combination of technical education and experience.

 
Job Number: 2010117586
Job Location: El Segundo, CA
Duration: 5 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Nicole Emfinger
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P2jGQAS&URLSource=cjhunter

Network Security Specialist 4

Description:
Chipton-Ross is seeking a Network Security Specialist 4 for an opening in El Segundo, CA.

RESPONSIBILITIES:
Seeking a STE Cyber Security Network Specialist for the BT&E Space Systems Test organization. Responsible for the hardening, deployment, setup, and readiness of network for Special Test Equipment in factory and launch environments. Scan for vulnerabilities, implement mitigations, install, administer, and troubleshoot on the following operating systems:
Microsoft Windows XP, Microsoft Windows 7, Microsoft Windows 10,
Microsoft Server software from the same eras of Windows above
Multiple Linux distros
Oracle Solaris (UNIX)Desired familiarity with a variety of services and protocols including:
NFS and CIFS network data, SAMBA
NIS, DNS, NTP, SMTP, SNMP, SSH, SFTP, VPNs
Active Directory, LDAP, Firewalls
RAID storage
Backup methodologies, disaster recovery
HTTP/HTTPS (typically Apache and IIS)
High level DBA skills (install, start, stop, etc): SQL Server and MySQL
Basic familiarity with HP/Agilent, etc. instruments and the ability to set up communications (Ethernet and GPIB)Programming skills:
UNIX/Linux shell scripts (C, Bourne, BASH)
Python script language

EDUCATION:
Accredited education/experience typically acquired through advanced technical education and typically 9 or more years' related work experience or an equivalent combination of technical education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 5:00 PM

ADDITIONAL REQUIREMENTS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 186988
Job Location: El Segundo, CA
Rate: $DOE
Duration: 5 Months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Niche - Senior Wordpress Developer

Description:
PDS Tech is seeking a NIche - Senior Wordpress Debeloper in Lewisville, TX, for a 3-month contract with potential to go permanent.


•             Create and maintain web content in Client WordPress instances in collaboration with stakeholders and teammates
•             Manage and maintain WordPress platform and plugins
•             Be ready to think through problems, help fix them, mentor and support others, think outside the box and ask questions.

Now, more specifically you would:
•             Lead the development of WordPress sites collaborating with both domestic and offshore development teams.
•             Develop responsive, standards-compliant HTML and CSS3 themes for WordPress
•             Install, test, and debug WordPress plugins and develop new plugins as needed
•             Evaluate designs for potential development issues and flag problems appropriately
•             Conduct cross-browser and cross-device testing
•             Prototype functionality for Legal and executive review
•             Take ownership of initial code quality including unit testing
•             Provide technical support to internal customers
•             Be responsible for the health and maintainability of our codebase
•             Monitor and maintain/enhance the ongoing performance of associated systems
•             Other duties as assigned

 
•             Graduation from a 4-year college or university with a degree in computer science or related field (equivalent work experience may be considered.)
•             5 years of professional experience as a software developer / programmer analyst with background in the skills below.
o             Object Oriented Programming
o             Software design patterns
o             JavaScript
o             React
o             Redux
o             GraphQL
o             MYSQL
o             PHP
o             Ecmascript 6
o             CSS3
o             HTML5
o             REST Services
o             GIT Version Control
o             Command Line $BASH etc.
o             Web server technology - Apache, NGINX or similar
o             Experience with Document Object Model (DOM) and Regex helpful

You’re a great fit if you have these skills:
•             Expert PHP development
•             Expert HTML & CSS skills with full understanding of web standards and responsive design techniques
•             Understanding of jQuery and other JavaScript libraries
•             Experience with WP-CLI tool
•             Basic understanding of accessibility best practices, Section 508 compliance and/or WCAG 2.0 standards
•             Experience with Scrum and Agile Methodology
•             Ability to estimate time and level of effort for front-end development tasks
•             Excellent communication skills, attention to detail and ability to work in a fast-paced, collaborative team environment
•             Detail oriented, well organized, able to thrive in deadline driven environment while working on a number of projects simultaneously and independently
•             Excellent written and oral communication skills
•             Experience with consumer-facing web sites
•             Experience with Chrome debugger and development tools
•             Grow expertise by proactively staying current with digital media and technologies
 
 
Job Number: 1910105115
Job Location: Lewisville, TX
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVm8QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations Specialist

Description:
Operations Specialist

Job ID # 2020-11903

Contract Opportunity

Location: Tallahassee, FL

Industry: Aerospace & Defense

Minimum Education: GED

Minimum Experience: 1 Year

 

What You’ll Do:

Responsible for harness, electrical, and mechanical assembly including but not limited to: routing wires, plugging wires, crimping contacts, make electrical connections with solder, assembling hardware, tightening hardware, complete testing of electronic units.
What You’ll Need:

Be able to use simple hand tools, power tools, fixtures and direct reading test devices.
Work safely following OSHA and ISO guidelines.
Must be able to interface with computerized work instructions as well as read and follow drawings.
MUST be able to inspect and verify work performed is in accordance with requirements.
Able to become IPC certified in Soldering.
Capable of lifting 20+ lbs without assistance.
Must be able to wear Personal Protective Equipment as required.
Must be able to communicate effectively with Supervisor.
Must be able to follow instructions.
Must be willing to work overtime during the week and including weekends.
Willing to work multiple shifts and holidays.
Strong PC skills using MS Word, Excel, and applicable software
Excellent verbal and written communication skills
Strong initiative & self-starter, requires minimal supervision
Demonstrates ability to lead and work proficiently within a team environment
Must be able to work overtime during the week or weekend as needed and as defined by supervisor.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

GED combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11903
Job Location: Tallahasee, FL
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer using Mentor Xpedition

Description:
Responsible for printed circuit board (PCB) designs from conception to manufacturing including library part creation, schematic capture, component placement, routing, gerber / ODB++ file creation and all documentation.

Xpedition environment with working knowledge of Xpedition VX1.1. Advanced level skills to include placement, routing, use of the auto-router, constraint manager, xDM and xDM Library Client. Use of BluePrint to create complex PCB drawings. • Must have experience designing complex analog, digital, RF, and mixed technology, multi-layer designs with HDI technology, high speed routing including DDR circuitry along with other similar complex technologies and skills to include signal integrity export and analysis. • Export manufacturing data of both Gerber and ODB++ and use of Valor Design Rule Checking software.
 
Job Number: 23618R
Job Location: AL
Per Diem: offered
Overtime: possible
Duration: Contract
Start Date: May 4th
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLC Programmer

Description:
A PLC Programmer job in Middletown, CT is currently available through Belcan. This is a 5-month contract position with our key aerospace client. In this role you will be responsible for performing technical assignments to assist in research, design, development, and maintenance of automation and new tools for production. To be considered you will have a Bachelor's degree in an engineering or computer science discipline required., and 3 or more years of related automation/programming experience.


PLC Programmer Responsibilities:
* Responsible for performing technical assignments to assist in research, design, development, and maintenance of automation and new tools for production
* Analyze existing software and make modifications to add features, improve reliability, and decrease cycle time.
* Establish a data connection with HMI in order to display machine status and receive operator commands. Document code for future work and establish revision control.
* Assist with machine run-off testing and production release activities.
* Verify and document proper function of machine safety system.


Requirements:
* Bachelor's degree in an engineering or computer science discipline required.
* 3 or more years of related automation/programming experience.
* Experience developing ladder logic programs for PLC systems and integration with HMI.
* Koyo and Reer PLCs preferred, but any ladder logic experience with any of the major brands will suffice.
* Ability to interpret and modify existing code to add features, improve reliability, and test functionality.
* Experience with other programming languages (LabVIEW, Visual Basic) or machine vision/measurement systems a plus.
* Fluent verbal/written communication skills.


If you are interested in this PLC Programmer job in Middletown, CT, please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 305207
Job Location: Middletown, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Packaging Engineer

Description:
PDS Tech, Inc. is seeking a Packaging Engineer, in York, PA.
  • Performs Packaging Engineering analyses and/or documentation development in compliance with customer requirements and applicable military or commercial standards and specifications. Ensures Packaging Engineering principles are fully integrated in the design of equipment supportability and the design of overall packaging, handling, storage, and transportability capability for the product life cycle. • Support the spares packaging department efforts of production programs through floor support, written work instructions and packaging process (PK codes).
    • Perform non-complex and applied engineering analyses, adapting and modifying standard techniques and procedures as needed, in support of engineering data development, PSIP, and spares packaging activities; may conceptualize, design, and invent as required.
    • Assists with developing and writing packaging proposals for packaging engineering and manufacturing packaging efforts.
    • Assists with investigating technical manufacturing packaging problems. Participates in developing and recommending corrective plan of action; may assist with implementing approved action plan.
    • Assists and provides technical guidance to packaging operators or other technical personnel; may assign tasks and manage technical activities or corrective actions for assigned projects.
    • Develops and reviews packaging design concept for complex nonstandard military and/or industrial equipment using CAD or specialty software; develops and checks packaging engineering drawings; schedules and monitors the build of the pilot and prototype; and validates the design.
    • Participates in packaging design reviews to ensure packaging, handling, storage, and transportability engineering concepts are customer compliant and support capability constraints. Coordinates with senior level personnel as required.
    • Shares the responsibility of self-development with immediate supervisor.
    • Maintains state-of-the-art knowledge of Packaging Engineering standards, methods, and technologies. • Complies with Company safety policies and maintains a safe work environment.
    • Performs other duties as necessary and appropriate to this position. •
     May acquire certification to provide technical guidance and to prepare hazardous materials for all modes of shipment. 
     

Skills/ Experience/Education Required 
  • Entry level knowledge of fundamental concepts, practices, and procedures related to packaging engineering. Familiarity with current computer applications and technologies in packaging engineering discipline. Ability to solve basic technical design and development problems.
     Familiarity with relevant military, industrial, and commercial design standards.        
    Experience Required      N/A      
    Experience Preferred     1+ year
    Education Required        BS degree in a relevant technical discipline; or a combination of education and experience equivalent to a BS in a technical discipline.          
    Education Preferred       Packaging Engineering degree   
    Additional Information  Regularly required to sit; frequently required to move about, and reach with hands and arms; and may occasionally be required to balance, stoop, kneel, crouch or crawl. Ability to lift up to 40 lbs to perform packaging testing/handle parts and operate test equipment. Normal office and shop environments. May require visits or assignments to other facilities, or customer sites.  


  
    











 
 
Job Number: 2010119307
Job Location: York, PA
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P8FUQA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Rep

Description:
Procurement Rep

Job ID # 2020-11867

Contract Opportunity

Location: Clearwater, FL

Industry: Aerospace & Defense

Minimum Degree: Bachelor’s Degree

Minimum Experience: 4 Years

 

What You’ll Do:

Source negotiate and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization.
Compile and analyze statistical data to determine feasibility of buying products and to establish price objectives.
Monitor performance of suppliers.
Compile information to keep informed on price trends and manufacturing processes.
Evaluate areas of opportunity to leverage material acquisitions.
Track data to keep informed on price trends and manufacturing processes.
Negotiate with suppliers and analyzes suppliers' operations to determine factors that affect prices and to determine lowest cost consistent with quality, reliability, and ability to meet required schedules.
Review proposals, negotiate prices, select or recommend suppliers, analyze trends, follow up orders placed, verify delivery, approve payment, and maintain necessary records.
May prepare request for proposals (RFP) and bid packages.
What You’ll Need:

Must have experience with FAR, DFAR, SAP
Software Skills:
SAP
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree combined with 4 + years of relevant work experience; or Master’s Degree combined with 2 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11867
Job Location: Oldsmar, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Support Engineer

Description:
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Modifies mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical standards and best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly issues.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Generates engineering design change orders • Generates engineering Bills of Materials (BOMs) • Uses established and well defined engineering procedures.
• Able to work simultaneously on a variety of projects.

• In pursuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology • 0-3 years of experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4111
Job Location: Northwest, MA
Rate: $29-$40
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: 6/22/2020
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Programmer

Description:
PDS Tech is seeking a candidate for a Programmer position located in Richardson, TX.

Job Description
Services Operations & Maintenance is looking for a talented and highly motivated Software Developer with full stack experience designing and creating web applications for both internal and external customers. The selected candidate must be familiar with all layers in computer software development, the ability to work on both the front-end and back-end portions of an application, and possess functional knowledge to take a concept and turn it into a finished product.

Accountabilities
• Design, develop, and maintain a software application to capture, store, and visualize data
• Optimize system architecture and framework to facilitate business goals and growth
• Interact with internal and third party stakeholders to define business processes and software requirements
• Interface with analysts and business unit leaders to create automations and new tool sets to solve problems in a fast paced agile environment


 
Qualifications

Required
• Strong analytical and problem solving skills
• Working knowledge with various database systems
• Ability to normalize and automate transfers of disperse datasets to centralized locations
• Experience designing and building web applications to visualize data
• Familiarity with various programming languages (JavaScript, Python, Java, CSS, HTML, Perl, etc.)
• Vast experience using web frameworks (Vue.js, Angular.js, Django, Laravel, Node.js, Yii, Meteorjs, etc.)
• Exposure to visualization libraries (Graphana, Chart.js, Chartist, C3.js, Highcharts, Nvd3, Flot, etc.)
• Experience with both SQL and nonSQL database schemas
• Extensive knowledge with experience in API design and web service communication protocols (REST, SOAP, etc.)


Desired
• Bachelor’s degree or higher in Computer Science, Information Systems or equivalent engineering field
• Strong interpersonal skills and experience working with cross-functional teams
• Creative eye with ability to conceptualize and communicate “big picture” goals
• Comfortable performing product vendor evaluations
• Detailed analytical abilities and technical writing skills
• Flexible and able to handle several projects simultaneously
• Telecommunication Industry Knowledge and Skills

 
 
Job Number: 1910104231
Job Location: Richardson, TX
Per Diem: No
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSyCQAW&URLSource=cjhunter

Project Manager

Description:
PDS Tech, Inc. is seeking a Project Manager in Auburn Hills, MI.

Responsibilities:

  • Product development process and ensure processes are followed and all product documents and data are completed and stored.
  • Review and manage project scope, goals, resources, and deliverables.
  • Track and report project costs, milestones, and other key project metrics.
  • Prepare team for internal and external design reviews to minimize technical and commercial risks.
  • Execute change management; document scope requirements and associated risks, track and revise project timeline, forecast project cost and communicate through the appropriate channels.
  • Provide regular status updates and be the contact person/interface to all involved departments & parties.
  • Drive engineering and operations teams to keep projects on time and on target.
  • Manages projects in all aspects of New Product Introduction processes from project initiation through successful transfer into production in manufacturing locations worldwide.
  • Suppliers lead.
  • Customer satisfaction oriented.

Qualifications/Education:
  • Minimum five years’ experience as a project manager managing multiple projects in engineering and production environment.
  • Knowledgeable of E/E and/or software engineering, design and analysis. Previous E/E and/or software engineering design and analysis experience is a bonus. Prefer experience working with integrated display units.
  • Bachelor’s degree or equivalent required; degree in technical field preferred.
  • Must be able to read, write, and speak English fluently.
  • Proficient in Microsoft Office Suite including MS Project.
  • Experience with Catia v5 is helpful.
  • Self-motivated with ability to function in a high energy, fast paced team environment with minimal direction.
  • Experience collaborating across multifunctional teams.
  • Must have excellent planning and organizational skills.
  • Able to build up new customers relationship and trust, to develop and consolidate long terms cooperation.

 
Job Number: 1910101837
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033g9xQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Representative- Nashua, NH

Description:
We have an Excellent Contract position for a Senior Supplier Quality Engineer to join a leading Company located in the Nashua, NH area.
Job Responsibilities:
Implement tools and processes to ensure suppliers are prepared and have robust plans to meet product quality requirements fo program customers.
Investigate, evaluate, and resolve supplier quality problems by conducting audits, analyzing defect trends, and leading continuous improvement projects.
Conduct capability assessments that verify supplier qualifications travel to assigned suppliers and lead multiple projects to completion.
Utilize supplier Scorecards/metrics and analytical tools to quantify performance levels of individual suppliers and work with those suppliers to develop improvement plans to achieve quality performance goals.
Evaluate the impact of non-conforming products and assess suppliers' corrective action robustness in order to ensure strong and permanent countermeasures.
Champion problem solving and Root Cause analysis activities with suppliers to eliminate the recurrence of non-conformances and drive a 'Zero Defect' mentality within the supply base.
Perform Source Inspection of product at supplier locations.
Perform and Evaluate First Article Inspections per the requirements of AS9102 as well as train suppliers to meet expectations.
Basic Hiring Criteria: Bachelor’s Degree in Engineering or Technical field with 5+/10+ (depends on grade level) years of experience.
Experience in Avionics or Defense Electronics Prime Contract environment Working knowledge of AS9100 Quality System and AS9102B First Article Requirements Experience with electrical/mechanical inspections, product test, equipment, and instrumentation Working knowledge of supply chain logistics from raw material to finished goods including experience with Enterprise Resource Planning (ERP) system/Quality Management Software system.
Lean Six Sigma Greenbelt or Blackbelt.
 
Job Number: 42846
Job Location: Nashua, NH
Rate: $39.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Quality Control Technician - Secret

Description:
PDS Tech, Inc. is seeking a Quality Control Technician, in San Diego, CA.

Summary:

  • Performs analyses and tests of raw materials, packaging materials, and/or finished products from manufacturing, to ensure quality standards and compliance to customer and regulatory requirements, and tolerance specifications for the chemical or physical property.
  • Performs a variety of qualitative tests or qualitative assays on samples, and to aid in maintenance and certification of test instruments and apparatus to ensure compliance
  • Prepares and monitors quality statistics and reports. Reviews production records for conformance to procedures. Conducts non-conformance tests of manufactured, packaged or tested product.

Basic Qualifications:


  • High School diploma or equivalent and 0 years additional education and/or related experience
  • Already possesses and ability to maintain SECRET DoD clearance
  • Must be able to work any shift/overtime (as needed)
  • Must be technically proficient in Microsoft Office Suite to include but not limited to Word, Excel, Power Point and Outlook.
  • Must be able to perform moderately strenuous physical and repetitious work to include climbing, bending, crawling, stooping, and kneeling, lifting, working with arms overhead, leaning and laying.
  • Must be able Lift, grip, push, pull and hold 25+ pounds.
  • Must be able to work in and around Confined spaces to include but not limited to fuel tanks and ducts.
  • Must be able to push and pull own body weight to enter and exit confined spaces.
  • Must have some programming experience.


Preferred Qualifications:


  • Experience developing in an Agile environment
  • Experience in Software Engineering
  • Experience in Software Automation
  • Understanding of DevOps









 
 
Job Number: 2010113848
Job Location: San Diego, CA
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnvgQAC&URLSource=cjhunter

Quality Engineer - Secret

Description:
PDS Tech, Inc. is seeking a Quality Engineer -  Secret, in Louisville,KY

Summary:



  • Develops quality plans, quality assurance procedures, work instructions. Performs layout work with applicable measurement equipment. Reads and interprets customer drawings and specifications and identifies appropriate inspection methods. Interprets geometric dimensioning and tolerancing specifications. Performs 1st piece, last piece, and in process inspection checks. Candidate will be working with large weldments and complex machining alignments. Provides support to Manufacturing Engineering and other business units. May direct the work of less senior personnel. Maintains a safe work environment and ensures compliance with safety objectives and policies



Experience with a Leica, FARO, or API Laser Tracker. Experience with Spatial Analyzer or similar software.    
Skills Preferred  Experience with a Leica, FARO, or API Laser Tracker. Experience with Spatial Analyzer or similar software. Working knowledge of ANSI Y14.5 Geometric Dimensioning and Tolerancing.    
Experience Required  Required education: High School/GED plus 5 years of relevant experience    
Experience Preferred  Bachelor's Degree and 5 years work experience or equivalent experience Required Skills and Education: Required education: High School/GED plus 11 years of relevant   
Education Required  Required Skills and Education: Required education: High School/GED plus 5 years of relevant experience    
Education Preferred  Bachelor's Degree and 5 years work experience or equivalent experience Required Skills and Education: Required education: High School/GED plus 11 years of relevant CMS certification preferred 

 
 
Job Number: 2010119235
Job Location: Louisville, KY
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003P7zXQAS&URLSource=cjhunter

RF Microwave and Hardware Subsystem Design Engineer

Description:
PDS Tech inc is seeking a Microwave and Hardware Design Engineer in Baltimore, MD

The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program.  Responsibilities may include development of antenna architectures, receiver / exciter architectures, requirements generation/flow down; subsystem analysis including hardware from RF to digits, performance modeling, support for performance testing, requirements verification, and more.

Experienced applicants will have at least a Bachelor’s Degree in Science or other related technical degree and have experience designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:

- Active electronically scanned arrays (AESAs)

- Highly integrated subsystems including antenna hardware

- Reflectors, Reflect Arrays, Digital Beam Forming

- Antenna/RF Performance Analysis

- Computational Electromagnetics, Statistics

- Antenna or Subsystem Control Design

- Antenna Measurements and Data Reduction

- Antenna range integration, test, and system integration

- Subsystem requirements (hardware and software) derivation, flow-down, and configuration

The Engineering RF Microwave Design positions require the candidates to have the ability to obtain and maintain at least a Secret Clearance per business requirements. An active Secret or higher clearance is a plus!

This is a Dual level opening, candidate will be considered at both a level 3 or 4 based upon the Basic Qualifications listed below.

Qualifications:
Basic Qualification for a Band 3:

Must have a Bachelor's Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description or 3 years of experience with a Master's Degree and/or 0 years of experience with a Ph. D.

Ability to Obtain and Maintain and Active Secret Clearance.

 
 
Job Number: 1910104510
Job Location: Baltimore, MD
Duration: 6 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTuwQAG&URLSource=cjhunter

RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking an RF Test Program Set (TPS) Design Engineer (Secret Clearance) in Baltimore / Linthicum Heights, MD.
 
Required Skills/Attributes or Domain Knowledge:
  • Mix of hardware RF/Digital and software skills (C/C++)
  • Background and working knowledge in RF theory and concepts
  • Test design and integration background
  • Candidate must be hands on person and have personal experience with test.

 
Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience.  Will accept candidates with more experience (8+ years) to fill at a higher level
 

 
Job Number: 1910107903
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP4yQAE&URLSource=cjhunter

Real Time Software Engineer

Description:
PDS Tech, Inc. is seeking a Software Engineer, in Houston, TX.

Summary:

  • Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for software systems.
  • Leads development of code and integration of complex software components into a fully functional software system.
  • Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.
  • Provides technical leadership for software projects and leads software supplier management activities.
  • Leads development, selection, tailoring and deployment of processes, tools and metrics.
  • Leads software research and development projects.
  • Serves as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
  • Trains and mentors others.
  • Works under consultative direction.


Required Skills
  • Experience analyzing SW requirements and designing / documenting Test Cases in a written form.
  • Experience writing automated software test scripts in Perl (experience scripting in Python or other scripting languages is considered relevant).
  • MATLAB  scripting to support test development.
  • 1553 MUX bus communication experience.
  • Experience in software development/test for spaceflight or using the C language or for embedded processing or with the VxWorks development environment.


Education:



  • Minimum - Bachelors in engineering, computer science, mathematics, physics or chemistry and 2 or more years' related work experience.
  • In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


 
Job Number: 2010115294
Job Location: Houston, TX
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou24QAC&URLSource=cjh