Job Search Results

524 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/02/25 Sunday 07:22AM Pacific Time by ContractJobHunter. )

Listings 1 - 524

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2213 - ELEC. SYS. SCHEMATIC DIAGRAM DESIGN - cv, word doc only

Description:
WILL PROVIDE ADDITIONAL INFO


Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Methods.

Minimum fifteen (15) years of relevant working experience in Aerospace .

Knowledge of Mentor Graphics (ESSD) is mandatory.

Have wiring design, wiring installation and/or wiring is a plus.

Must know the Harness Configuration Process.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Possibility for shift work on any day and/or at any time of day Day shift but possibility to work Evening Shift on occasion.
 
Job Number: 2213
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2219 - FLIGHT SIMULATION SPECIALIST - resume word doc only

Description:
Develop aircraft simulation models. These models are used in the design and validation process of a new aircraft, in support of in-service aircraft and for incident investigation. The models are also deployed in training simulators used to instruct flight crews throughout the world. Flight simulation engineers support the qualification of these flight crew training simulators with regulatory authorities.

Use data from computational fluid dynamics, empirical aerodynamic estimation methods, wind tunnel tests and derive aerodynamic derivatives from flight test data to conceive and update the simulation models.

Develop and maintain bombardier's pilot-in-the-loop engineering flight simulators and participate in planning and testing of new and existing designs, in collaboration with flight test crews.

Interact closely with the stability and Control, System Simulation, Fly-by-Wire, Loads, Systems Engineering and aircraft/engine performance groups, and flight simulator manufacturers.

Use state of the art software, such as Matlab/Simulink, MAtrixX/SystemBuild, to develop the simulation models. In addition, customization and automation of these tools is achieved through programming in C/C++ and other software packages.


Have a Bachelor's or master's degree in Aeronautical (or Mechanical) engineering as well as a minimum of eight (8) years of relevant experience in the Aerospace industry.

Have good knowledge and experience in simulation model development, real-time simulation, flight dynamics, flight testing, test data analysis and application of North American and European simulator qualification requirements.

Have good programming skills. Knowledge of Windows and UNIX operating system environments, Matrixx/SystemBuild, Matlab/Simulink, MS Word, MS Excel, MS Powerpoint are essential.

Have good written and oral communication skills.

It would be an asset to have good knowledge and some experience in wind tunnel testing, flight testing, test data analysis and the application of the FAA/EASA Part 25 certification requirements, along with PV-WAVE, Frame Maker.

Have a thorough understanding of flight simulation model generation for design, rig and pilot training purposes.
 
Job Number: 2219
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2257 - PROJECT ENGINEER - cv in word doc please

Description:
Lead Integrated Product Development Team (IPDT) weekly meetings for your respective systems.

Develop, harmonize, maintain and update Schedules for each phase of the Program, with the Suppliers and Client.

Interface with the Project Management group and the Work Package leads, you will be responsible for managing the integration of the work package schedule and ensure that it is harmonized with the overall program schedule and across other work packages.

Identify and report Issues and Risks with mitigation plans.

Ensure effective delivery, review and approval of all deliverables in each program phase.

Ensure compliance to all governing documents and processes.

Participate in the problem solving and recovery plans when required to maintain key deliverables' timeline.

Bachelor degree in Aerospace Engineering or equivalent.

Have five (5) to eight (8) years of relevant experience in project management or equivalent.

Ideally have experience in aerospace.

Demonstrate excellent oral and written communication skills.

Have superior skills in MS Office including MS Project, PowerPoint and Excel.

Are a team player with strong communication skills who interfaces well with the many business partners involved.

Have experience in Project Management and or Project Engineering.
 
Job Number: 2257
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2272 - MATERIALS & PROCESSES - COMPLETIONS - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Act as M&P expert;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2272
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2273 - PROGRAM ANALYST - INTERCO- cv. word doc only

Description:
Enable the INTERCO teams by helping to identify and remove obstacles they are facing that could prevent them from meeting the program schedule.

Stay abreast of schedule risks and work with INTERCO to develop mitigation plans.

Raise issues and Report on INTERCO teams progress .

Coordinate with FAL and INTERCO teams to ensure the schedule is well communicated and understood and the individual teams%u2019 plans support the overall program schedule.

Participate in daily INTERCO FAL governance reviews.

Experience in the aerospace industry and a Bachelor's degree in Engineering or equivalent coupled with more than eleven (11) years of relevant work experience.

Specific knowledge of aircraft design, assembly and testing particularly aero-structures and wiring is essential.

Operations experience in an aerospace manufacturing environment.

Demonstrate excellent communication skills in English and French both spoken and written.

Possess strong negotiation skills and are well versed in project management.

Teamwork, customer orientation, leadership and innovation make you an effective person.

Have good knowledge of business drivers such as the financial and schedule aspects of a major development program.

Are familiar applications Microsoft Project, Word, Excel, PowerPoint

Are able to travel internationally and be able to spend extended times at INTERCO sites (St. Laurent, Belfast & Queretaro facilities) as needed.
 
Job Number: 2273
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2280 - CHEMICAL ENGINEER - cv, in word doc please

Description:
Part of a multi-disciplinary team (engineers, unionized staff, technicians) dedicated to optimizing processes and products for business aircraft interiors.

Identify potential solutions, product & process improvements following a scientific analysis of problems arising from interactions between various chemical products (coating systems) and their substrates.

Develop test plans and reports in order to acquire data for scientific analysis.

Coordinate test activities in a production environment in order to ensure proper procedures are followed.

Make technical recommendations as well as create/revise technical documentation in order to improve production efficiency.

Liaise with external laboratories and organizations in order to develop and disseminate a thorough understanding of business jet interior products and technical procedures.

Develop technical criteria and requirements for aerospace grade finishing and coating systems.

Degree in Chemical Engineering (or equivalent) with a specialization in polymers, coatings and organic materials (such as wood) as well as at least 10 years of industry experience.

Able to apply a rigorous engineering method along with scientific knowledge to solve problems attributed to interactions between multiple coating systems and their various substrates.

Familiar and comfortable with the aesthetic requirements stemming from application of coating systems to substrates.

Familiar with wood science & wood coatings in considered an asset.

Strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2280
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2281 - TEST & CERTIFICATION PROJECT ENGINEER

Description:
Create, harmonize and ensuring schedule compliance in support of successful project accomplishment

Ensure proper working link between BA, BFTC, and other work packages.

Coordinate and track to ensure major Supplier/BA deliverables are available on schedule

Create, harmonize and track compliance to various schedules required to manage the project

Coordinate snag disposition between Avionics supplier and WP's through FRACAS tool

Track and status the release of Certification Documents, drawings and Test Definition Sheets

Solve problems in a timely fashion and with a high level of quality.

Design and produce proper visibility packages and governance (IPDT, KPIs, status presentation, DMM material, internal reviews, follow up of escalations). Presentation material to upper Management as required.

Manage priorities, and communicate and harmonize these priorities

Coordinate multi-site activities as necessary

Support Budget preparation and provide associated visibility (Budget vs Spend etc)

Actively support the Achieving Excellence (AE) departmental objectives

Represent Engineering & Product Development at various inter-departmental meetings· Create, harmonize and ensuring schedule compliance in support of successful project accomplishment

Ensure proper working link between BA, BFTC, and other work packages.

Coordinate and track to ensure major Supplier/BA deliverables are available on schedule

Create, harmonize and track compliance to various schedules required to manage the project

Coordinate snag disposition between Avionics supplier and WP's through FRACAS tool

Track and status the release of Certification Documents, drawings and Test Definition Sheets

Solve problems in a timely fashion and with a high level of quality.

Design and produce proper visibility packages and governance (IPDT, KPIs, status presentation, DMM material, internal reviews, follow up of escalations). Presentation material to upper Management as required.

Manage priorities, and communicate and harmonize these priorities

Coordinate multi-site activities as necessary

Support Budget preparation and provide associated visibility (Budget vs Spend etc)

Actively support the Achieving Excellence (AE) departmental objectives

Represent Engineering & Product Development at various inter-departmental meetings


Engineering degree/diploma or equivalent working experience, with 5 years+ experience in aerospace testing area (essential)

Familiar with testing environment and processes

Familiar with Program/Project Management.

Familiar with BA environment and processes (an asset)

Professional attitude and superior communication skills (essential).

Excellent organizational, time management skills, foresight, accuracy, attention to detail and commitment to objectives and responsibilities.

Pro-active attitude and an ability to manage multiple priorities.

Self-motivated, autonomous and enthusiastic.

Ability to work willingly and independently in a fast paced, challenging environment.

Effective problem solving skills with ability to make good decisions to move projects along to meet or exceed the targets.

Good computing skills;

Proficient in MS Office and have experience with MS Access/Project.

Some travel will be required
 
Job Number: 2281
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2289 - LIAISON ENGINEER - EVENING SHIFT - cv.word doc only

Description:
Responsible for providing engineering support to the production operations at the Assembly Business Unit (Client Programs) during the evening shift and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

Possess a university degree in Mechanical Engineering.

Have eleven (11) years or more MRB experience in the Aerospace field.

Possess Catia and MRB (Material Review Board) work experience.

This position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

Must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Bilingualism - (French and English), would be an asset.

Workday expectations: Evening shift. Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).
 
Job Number: 2289
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2291 - SENIOR ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Provide wiring diagram technical and configuration leadership to wiring design team.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership, coaching, mentoring and training to staff.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are proficient with MS Access data entry.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses
 
Job Number: 2291
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2296 - PROJECT MANAGER - cv. word doc only

Description:
Ensure that all activities are aligned with other activities of other cells and maintain regular contact with the people involved.

Coordinate activities to ensure the achievement of the required harmonized way client.

Work independently on a multitude of records (plans) that affect all the expertise involved in the realization of the objectives seeking the capacity to suppliers to ensure timely delivery of various required.

Ensure communication and information sharing among all contributors of development activities to ensure alignment.

Responsible for the timely delivery of various documents of the meetings of the organization (governance).

Plan and monitor plans following delivery of various components.

Work closely with QA team on the floor as well as the upstream supplier management team.

Start the charging process to suppliers in collaboration with the team management of upstream suppliers.

Make the upstream monitoring of non-compliances identified in collaboration with the team of supplier management and ensure to identify the 'top 3'.

Audit suppliers on quality processes in place for the company.

Ensure the maintenance of the objectives of the cycle time with the / suppliers

Respond to emergencies that stop the production line that are connected to non-quality suppliers.

You will work directly with the product (work closely with production management).

College degree in aerospace or the equivalent and minimum of eleven (11) years of experience in aerospace.

Have a very strong experience in the assembly of aircraft (structural and systems).

Bilingual, good communicator, professional and are open to work with other cultures.

Have a good knowledge in Quality procedures, processes and systems.

Have experience with NCMS Systems (Non Conformance Managment System).

Must have experience working in a Manufacturing environment in the aerospace industry.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Knowledge of SAP is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Knowledge on implementation of change management activities is an asset.

Must have excellent communication skills, both written and verbal in both English and French.
 
Job Number: 2296
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2298 - ELECTRICAL PARTS QUALIFICATION ENGINEER - cv. word doc only

Description:
Review and approve Supplier Qualification documentation (tests, schedule plan) according to the standards and technical specifications.

Support standard and process documentation improvements initiatives.

Coordinate technical reviews and follow up with suppliers.

Work with Sourcing to resolve Supplier issues on EWIS qualification.

Maintain central database and information tools with the proper updated qualification documentation.

Support standardization of parts efforts by identify qualified parts alternatives for any new design demand.

Minimum five years (5) years of work experience in aerospace industry.

Degree in Electrical Engineering.

Familiar with the electrical wiring components, material, technical specifications & regulations.

Ideally, experience with the Bombardier Aerospace processes and standards (B standard, BM).

Excellent knowledge of MS Office.

Have leadership, negotiation and teamwork skills.

Possess good communication skills.

Able to work in versatile new product development environment.

Working knowledge of English - French working knowledge an asset
 
Job Number: 2298
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
7 Aircraft Stress Engineers with Composites

Description:
7 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
Now Hiring Aerospace Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Engineer jobs in Atlanta, Georgia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best aerospace engineering jobs in Atlanta, Georgia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Duties:

• The successful candidate serves as an engineer driving commercial aircraft sheet-metal and composite component repair and vendor oversight
• Reviewing data and recommending and implementing changes as required
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected components
• Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Technical Operations Policy and Procedures (TOPP) and all other engineering processes
• Providing status for projects/issues through various briefings and documentation
• Preparing and conducting Engineering Working Group meetings
• Revising numerous FAA approved Manuals and Engineering Reports
• Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
• Irregular shift hours may be required, on rare occasion, due to critical requirements
• This may include weekend work depending on criticality of the issue
• Occasional travel is required to support the programs
• This position will focus, initially, on aircraft composite & mechanical component systems
• This position reports to a lead engineer and the Manager of Component Engineering

Qualifications:

• Bachelor Degree in Engineering with 0-5 years’ aviation related experience focus on repair development
• Previous airline, military, OEM or MRO experience with commercial aircraft is preferred
• Familiarity with airline flight operations and support systems, 14 CFR 121 dispatch regulations and 14 CFR 145 repair station regulations are highly desired
• Understanding of composite structure related to aircraft Thrust Reverses is preferred, but not required
• Must have strong customer service orientation and relationship management skills, strong project management skills; written and verbal communication skills; multi-tasking abilities; proven results-orientation; and strong analytical, organizational and time management skills
• Strong knowledge of Microsoft Office products and AUTOCAD, or similar, is desired
• Accurately anticipates the not so obvious impact of various solutions to technical problems
• Provides feasible alternatives to solve complex problems which require the regular use of ingenuity and creativity

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40578
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Engineers - Orlando, FL

Description:
Now Hiring Aerospace Mechanical Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Mechanical Engineer jobs in Orlando, Florida. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Orlando, Florida; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Mechanical Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• The candidate will be responsible for the thermal design, analysis, and testing of assembly systems, subsystems, and components
• Tasks include performing preliminary and detailed thermal analysis on assembly systems and subsystems as well as performing comprehensive modeling of the entire thermal system using standardized processes and tools
• Tasks may also include providing support for thermal testing of systems, subsystems, and components
• In addition, the candidate will provide technical documentation and input to data packages to support peer and customer reviews, present analysis data to program and customer personnel at technical interchange meetings and design reviews
• Candidate will perform heat transfer using standardized thermal software tools, analyze thermal management systems, and coordinate requirements and design solutions with program personnel
• Responsible for research and development of viable thermal solutions for systems and components
• Experienced with relevant analytic tools for thermal analysis

Required:

• MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering, or related field or a BS with at least 2 years’ Thermal Analysis experience in the aerospace industry
• Experience with thermal design of assembly systems, subsystems, and components
• Demonstrated strength in thermal analysis with a desire to learn more and demonstrated strong problem solving and analytical skills
• Experience performing heat transfer analysis
• Excellent writing and verbal communication skills for generating thermal plans, thermal analysis reports, documentation, and potentially proposals are necessary
• Candidate must be able to obtain a security clearance

Preferred:

• Experience with CAD modeling using PTC CREO, FORTRAN programming, CFD software (Star CCM+, FlowEFD), and Siemens NX CAD and Thermal/Flow software suite
• Experience with MATLAB and Mathcad
• Creativity/innovation to solve issues related to thermal design performance of any aspect of thermal systems
• Experience developing and analyzing in thermal design of thermal management systems
• Experience calculating internal and external convection coefficients of simple and complex geometries and being able to research literature when necessary
• Experience writing environmental and component specifications, and system/subsystem/component test plans
• Considered an emerging authority

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40586
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aerospace Positions

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is hiring Aerospace Quality Inspectors in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Job Summary:

As a quality inspector you will be responsible for being the last line of defense in assuring mission success. You will perform in-process inspections and verify that all key performance and design characteristics are met or exceeded during test preparation and acceptance testing. You will be working hands on with the most cutting edge rocket technology currently available and will be part of history.

Job Duties:

• Perform receiving, in process, and final inspection on structures and propulsion major subassemblies, including mechanical, electrical, electro-mechanical, pneumatic and hydraulic parts, components, and sub-assemblies
• Inspect, verify, and proactively support structures and propulsion development and acceptance testing; assuring adherence to design, specification, and testing requirements
• Assist with the specification, purchase, and maintenance of calibrated measuring and test equipment
• Communicate and help resolve quality related issues as they relate to the site and other company locations i.e. launch site, production, and manufacturing
• Process non-conforming product

Basic Qualifications:

• Associate’s degree in relevant field
• Minimum of 3 years’ of experience in an aerospace environment

Preferred Skills and Experience:

• Airframe and power plant license
• Knowledge of quality assurance principles, methods, and processes
• Knowledge of avionics and electrical systems
• Knowledge of aerospace propulsion and principles
• Knowledge of aerospace structures
• Knowledge of GSE systems and general associated equipment
• Strong knowledge and experience in aerospace standards and its general practices
• Intermediate skill level with Windows operating systems
• Intermediate skill level with Microsoft Office (Excel, PowerPoint, Word, Outlook)

Additional Requirements:

• Ability to work at elevated heights
• Physical effort including standing, lifting and carrying moderately heavy materials or equipment up to 35lbs.
• Typically exposed to work in extreme outdoor environments – heat, cold, rain
• Work occasionally performed in an environment requiring exposure to fumes, odors, and noise
• Typically 50 hour work weeks, schedule varies depending on site operational needs

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40597
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Engineer - California

Description:
Leading aircraft company are seeking an experienced Aerospace Test Engineer to support the development, integration and testing of an ejectable flight data recorder project. This is in the early stages of the project and the role will support all phases of system development including design and analysis, requirements compliance methods, certification (verification / validation) test preparation, and integration into large scale commercial aircraft environments.

Responsibilities include:

* Identify testing required for verification and validation using industry standards & regulations
* Prepare system and component functional and performance certification test procedures, manufacturing test methods and procedures, in accordance with input from other team members.
* Review and evaluate identified program functional and performance requirements for applicability to program goals and objectives.
* Establish testing protocols and test requirements based upon test specifications, drawings, as well as manufacturing and process specifications.
* Identify industry standard test equipment and resources
* Conduct and/or witness mechanical and environmental tests for FAA certification. .
* Test and certification will include subcomponent and component system qualification, for both mechanical and electrical requirements
* Position will require interfacing with the FAA or designated engineering representative, preparation of technical status presentations and leading detailed test reviews.

You will have considerable experience in aerospace structural and electrical testing and must be familiar with aerospace test standards MIL-STD-810 and DO-160, with DO-178 and DO-254 knowledge preferred. A working knowledge of CATIA V5 and DOORS requirements management tool would also be useful.

Experience must include a strong background in the aerospace engineering requirements and verification process and the ability to understand mechanical and electrical aerospace drawings, environmental requirements, test requirements, and various aerospace test methods.

This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
 
Job Number: JO0000000012
Job Location: Newport Beach, CA
Rate: to $75/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Air Systems

Description:
ECS for interiors/cabin pressure systems; aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 01/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
160536/14657
Title Airframe Design Engineer
55/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

- Experience with NX and FiberSIM highly desired

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 55/hr max
Duration: 6 month contract
Input Date: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Induction Engineers - Las Vegas, NV

Description:
Now Hiring Aviation Induction Engineers!

Overview:

STS AeroStaff Services is now offering Aviation Induction Engineer jobs in Las Vegas, Nevada. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Las Vegas, Nevada; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aviation Induction Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

Will be supporting client’s engineering activities for some used aircraft that will be inducted into client’s fleet.

Essential Duties & Responsibilities:

• Will be reviewing the existing aircraft configuration, determining which mods/SBs/ADs need to be embodied during the induction check, and generating the associated engineering documentation

Qualifications:

• The ideal candidate would be well versed in Airbus A320 family avionics and/or systems OR interiors
• A bachelor's degree in Aerospace, Electrical or Mechanical Engineering is required
• Previous airline or MRO engineering experience with Airbus aircraft
• Must be able to read and interpret technical drawings and related information. (e.g. wiring diagrams)
• Should have the ability to effectively generate detailed engineering documents
• Should have the ability to interpret analytical reports, FARs, ADs and other engineering documents/drawings
• Must be able to make sound engineering decisions and develop the documentation to support these decisions

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40596
Job Location: Las Vegas, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionics -- Flight Management Systems

Description:
Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer IV / Cable Harnesses

Description:
-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.
-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
-Experience is design of cables and harnesses for applications for Aerospace products.
-Proficiency in use of Creo PDM/Link and Windchill.
-Additional proficiency with GD&T and tolerance analysis.

• Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
o Previous experience with MODELCHECK preferred
• Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
o Large Assembly Management, Simplified Representations, Combination States
o Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
o Mechanism Design
o Advanced part modeling techniques including the use of relations, analysis features, and flexible components
• Experience with Creo Cabling including
o Utilizing logical reference data (automated routing)
o Harness flattening using Creo Harness-MFG extension
• Working knowledge of Creo Schematics 2.0 desired including:
o Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog
• BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 7461434
Job Location: Canoga Park, CA
Rate: OPEN DOE
Duration: 6-12 Months
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software

Knowledge, Skills and Abilities:
1. Ability to create 3D models utilizing CATIA V5.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-011
Job Location: Greensboro, NC
Rate: $50 - 60/hr May pay more DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CHINA - Aero Engine - Chief Design

Description:
Leading Chinese civil aerospace engine development organisation are seeking a high-level Chief Design Engineers to provide consultancy support in Low Emission Combustion & engine compression systems for a new major aero engine development program. (in support of the COMAC C919 / widebody programs)

Design Chief - Low Emission Combustion>>>

Responsibilities:

To formulate the technology development of civil aircraft engine turbine.

To organize the construction of related design system and Test & Verification platform of civil aircraft engine turbine.

To organize the research of civil aircraft engine turbine.

To scheme and conduct the technological cooperation with domestic and foreign research organization in civil aircraft engine turbine.

To organize the application of key technology research and pre-research project.

To provide technological consultation in developing civil aircraft engine turbine.

To train, guide and improve the skills of working team.

Requirements:

15+ years working experience in civil aircraft engine turbine field.

Solid knowledge in turbine aerodynamic, cooling, mechanical and structure theory.

Familiar with key technology of civil aircraft engine turbine..

Priority will be given to those who have the experience of civil aircraft engine turbine design and test.

Priority will be given to those who have the experience of project management and team management or extraordinary achievement.

Design Chief in civil aircraft engine's compression system >>>

Responsibilities:

To formulate the technology development of civil aircraft engine's compression design system, including fan, booster and high pressure compressor.

To organize the construction of related design system and Test&Verification platform of civil aircraft engine's compression system.

To organize the research of design in civil aircraft engine's compression system.

To scheme and conduct the technological cooperation with domestic and foreign research organization of design in civil aircraft engine's compression system.

To organize the application of key technology research and pre-research project.

To provide technological consultation in designing in civil aircraft engine's compression system.

To train, guide and improve the skills of working team.

Requirements:

15+ years working experience in civil aircraft engine's compression system design field

Solid knowledge in compression system design theory.

Familiar with key technology of design in civil aircraft engine's compression system.

Priority will be given to those who have the experience of design and test in civil aircraft engine's compression system.

Priority will be given to those who havethe experience of project management and team management or extraordinary achievement.

Terms>>>

Depending on the individual, the role can be taken up as a full-time / long-term (2-5years) direct hire with the client or part-time (limited hours e.g. 1000 / yr), with a mixture of working in China and regular home breaks. Some remote working can be also possible. Remuneration will be either hourly rate of monthly salary for longterm.
 
Job Number: JO0000000008
Job Location: China
Rate: Various
Duration: Various options
Start Date: Flexible
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist Class C Third Shift (Night)

Description:
Velocity represents an internationally known leader in the design and manufacture of aerospace fastening, bushings and fittings. Our client has developed innovative products for both metal and composite applications that are used on commercial and military rotor and fixed wing aircraft worldwide. Their products are approved and used by virtually every airplane and helicopter manufacturer. Our client is currently looking for a CNC Machinist C for its manufacturing operation in Tukwila, WA.
Position Summary:
Under minimal supervision, sets up and operates computer numerical control lathes, mills and machining centers to cut, shape, or form metal work pieces to specification by performing the following duties.
Key Responsibilities:
• Performs basic operation of equipment to produce to rate and meet quality standards.
• Loads material into machine and unloads parts after operation.
• Monitors and removes metal chips from tools and equipment and disposes of them in the proper container.
• Monitors machine condition and reports and unusual noises or occurrences to supervisor or lead.
• Monitors cutting conditions and alerts lead or supervisor if tools are not cutting properly.
• Performs housekeeping tasks to maintain a clean and orderly workstation and performs basic machine upkeep, such as wiping down outside surface of machine, lubrication, etc.
• May hand Deburr or sand parts, as needed.

Core Competencies Required for this Position:
• Good inter-personal skills.
• Good verbal and written communications skills.
• Organization and time management skills.
• Problem solving/analysis.



Qualifications:
• At least 1 year related CNC lathe or mill experience or equivalent combination of experience and training.
• Must have knowledge of shop practices and procedures, ability to read blueprints, and ability to use hand tools and measuring instruments.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints and procedure manuals.
• Ability to write routine data on routers and SPC charts.
• Ability to use math skills to solve problems.
 
Job Location: Tukwila, WA
Overtime: Possible
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Duration: 1 year contract (possibility of being extended longer)
Shift: 1st Shift


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **
** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

- 50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
- 10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
- 5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
- 10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
- 10% - Modify existing parts programs for engineering changes or program improvements.
- 5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
- 5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
- 5% - Participate in knowledge sharing and cross training activity within the NC programming group.


Skills:
Required (MUST show this experience on resume):
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
-Bachelors degree or equivalent experience.
 
Job Number: 8013
Job Location: Canoga Park, CA
Rate: $40.00 - $44.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Cabin Safety Specialist

Description:
Annunciator, emergency lighting, human factors, placards, signage

Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

Cabinetmaker Sr

Description:

PDS is seeking a Cabinetmaker Sr for an open position in Savannah, GA.

Under general supervision, fabricates the most complex cabinets and other wood-surfaced subassemblies for installation in aircraft. Assists lead by overseeing projects and providing guidance, assistance and training to co-workers. 

Essential Functions:

  1. Fabricates complex high quality furniture and other wood-surfaced subassemblies using stationary and hand held-tools.
  2. Interprets material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements with a high level of quality and detail. Coordinates with supervision to ensure compliance with customer approved design samples.
  3. Utilizes a variety of woodworking tools and techniques.
  4. Complies with and champions safety, 5S, and housekeeping policies and ensures the protection of aircraft interiors.
  5. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
  6. Utilizes the material tracking system to create parts demand, track squawks and to sign-off work. 


Additional Functions:

  • Accepts Lead responsibilities when required. Mentors and trains lesser skilled technicians.
  • Oversees projects and coordinates with Lead to delegate tasks to assigned technicians.
  • Conducts safety audits and assists team members in doing safety audits.
  • Assists in maintaining shop equipment and associated JSAs.
  • Coordinates with other backshops when necessary.
  • Adapts to sudden schedule changes.
  • Performs other duties as required.


 



Education and Experience Requirements:



  • Must be able to work any shift and work overtime as needed.
  • High school diploma/GED.
  • Advanced knowledge of cabinetmaking processes and products.
  • Four (4) years of experience in cabinetmaking.
  • Experience in aerospace industry preferred.
  • Possess a working knowledge of inspection and process specifications preferred.

Other Requirements:

  • Demonstrates excellent communication skills, both verbal and written.
  • The ability to read, write, speak, and understand the English language.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate..


Please send your current resume to:
Earl Sawyer
Aviation recruiter 
esawyer@pdstech.com
843-277-6616  

 
Job Number: 1710074567
Job Location: Savannah, GA
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023JSqAAM&URLSource=cjhunter

Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 02/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** These rolls will not convert to a direct hire role unless circumstances significantly change **
** Candidates must have 6 to 9 years of experience **

Keywords: (MUST be seen in resume)
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
- BS Engineering or Equivalent BS degree
 
Job Number: 7948
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Duration: 6+ month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** Candidates must have 6 to 9 years of experience **

Keywords:
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
- BS Engineering or Equivalent BS degree
 
Job Number: 8016
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery CA

Description:
7449330
Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery

45/hr max

Number of Positions: 3

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These roles will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree

Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/30/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7449330
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 12 month contract
Input Date: 11/29/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery FL

Description:
7352726/160505
Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery
45/hr max

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These rolls will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree

Languages:

Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7352726
Job Location: Jupiter, FL
Rate: 45/hr max
Duration: 10 month contract
Input Date: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Composite Technician (2) - CA

Description:
Chipton-Ross is seeking a Composite Technician (2) for an opening in Long Beach, CA.

RESPONSIBILITIES:
-Maintain high standards of safety, quality and output consistent with the requirements of being a client team member.
-Hand lay-up of composite parts in line with development and production requirements.
-Operate the fiber winding machine to support the fabrication of wound parts.
-Work with and provide input to the development and manufacturing engineers to improve part manufacturability.
-Trim and drill of composite parts in line with drawing requirements.
-Load and unload parts into ovens and ensure cure cycles are correct.
-Use of hand tools for the modifications of composite parts.
-Ability to operate a laser tracking system.
-Use of appropriate PPE when working around parts on the shop floor.
-Support the implementation of the ERP system on the shop floor and recommend changes as required.
-Recommend and implement continuous improvement activities in production methods, equipment performance and team effectiveness.
-Ability to train and lead team members, be willing to lead by example and jump in to help when required.
-Help client do its part to make the world a better place
-Constantly learn new things-and share them with your team members
-Performs other duties as assigned

REQUIRED EXPERIENCE:
-2 years prior experience in composite production is required.
-Knowledge of composite fabrication methods and techniques including filament winding, hand lay-up, compression molding and vartm.
-Experience with oven cure and autoclave cure.
-Demonstrated experience in new product introductions within aerospace, aviation or automotive.
-Knowledge and understanding of lean manufacturing.
-Ability to read and interpret engineering drawings and specifications.
-Ability to use metrology equipment to measure parts such as romer arm and bench inspection equipment.
-Ability and willingness to thrive in a fast-paced, rapidly changing work environment
-Driven, highly motivated, and committed to improvement
-Ability to add something unique and positive to our team
-Generally high level of all-around awesomeness
-Must be able to work all shifts and available for overtime as well as weekends when needed
-Must be able to stand for extended periods - 8 hours minimum
-Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
-Physically able to handle items weighing up to 40lbs (unassisted)

ADDITIONAL EXPERIENCE:
-Creative problem solver, able to work in multi-disciplinary teams.
-Self-directed with excellent organizational skills and problem-solving skills.
-Ability to work in both R&D and production rate environments.
-Passion for space exploration and a firm belief in the utility of affordable access to space
-Ability to thrive as a 'one person team'

EDUCATION:
"High school diploma or GED
-Certifications or similar within aerospace, aviation or automotive
-Graduated from a technical college or other recognized apprenticeship

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 164355
Job Location: Long Beach, CA
Rate: Up to $25.00 DOE
Duration: 6 Months
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Contract & Pricing Admin 4- Secret

Description:
PDS Tech Inc is seeking a Contract & Pricing Admin for an open position in Huntsville, AL

As member of acquire business and program business management teams, leads proposal development and negotiation and provides contracting expertise to develop and negotiate complex creative business solutions for R&D, advanced product development and new and follow-on business. Represents the company to diverse customers, including U.S. Government entities and international customers and commercial space customers. Solely authorized to exercise commitment authority in negotiating and contracting for the sale or development of complex, high performance defense and aerospace products and services including aircraft, missiles, spacecraft and launch vehicles. Administers complex contracts and agreements to ensure efficient, effective and compliant performance during the entire acquisition and product lifecycle including interpretation of contract requirements, risk management, change management, conflict resolution, delivery and payment for products and services. Establishes professional networks and customer rapport to facilitate company objectives and customer satisfaction. Provides contracts and pricing mentoring, technical and operational leadership across the enterprise. Partners in the development of business unit strategy and achievement of goals.
Bachelor's degree and typically 10 or more years’ related work experience, a Master’s degree and typically 8 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 1710076376
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 02/23/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NKtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DAR

Description:
• Perform inspections of aircraft parts, assemblies, installations, test set ups. Witness functional acceptance and structural tests.
• Make determinations to ensure conformity to type design and compliance with regulatory requirements.
• Ensure proper completion and handling of all necessary FAA forms

Qualifications
• Must be a current Designated Airworthiness Representative.
• Airworthiness function codes 21 a must, 9 a plus.
• Must be a certificated Airframe and Power plant mechanic.
• Must have minimum 10 years Aerospace Quality Control/Quality Assurance experience.
• Must have minimum 5 years experience working in a Type Certificate or Supplemental Type Certificate project.
• Must have thorough working knowledge of the following:
• FAR Part 21 Certification Procedures for Products and Parts
• FAA orders 8110.4 Type Certification and 8130.2 Airworthiness Certification of Aircraft and Related products.
 
Job Number: 28-018
Job Location: Greensboro, NC
Rate: $100.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Design & Analysis Engineer - CA

Description:
Chipton-Ross is seeking a Design & Analysis Engineer for an opening in Long Beach, CA.

RESPONSIBILITIES:
-Design the vehicle structural elements and configurations in concert with other engineering disciplines.
-Design of composite structures with attention towards high production manufacturing.
-Assistance in the development of manufacturing, integration, and test processes and procedures.
-Launch and mission operations support.
-Help client do its part to make the world a better place
-Constantly learn new things-and share them with your team members
-Performs other duties as assigned.

REQUIRED EXPERIENCE:
-2+ years of experience in an aerospace manufacturing environment
-Strong expertise in Finite Element Analysis using industry tools such as FEMAP, NASTRAN, and ANSYS.
-Strong skills in Geometric Dimensioning and Tolerancing drafting skills.
-Knowledge of the design, analysis, fabrication, and test of composite and metallic structures.
-Ability and willingness to thrive in a fast-paced, rapidly changing work environment
-Driven, highly motivated, and committed to improvement
-Ability to add something unique and positive to our team
-Generally high level of all-around awesomeness
-Must be able to work all shifts and available for overtime as well as weekends when needed

-Experience in NX/Teamcenter
-Experience in low cost commercial space system ventures
-Experience with air launched space launch
-Passion for space exploration and a firm belief in the utility of affordable access to space
-Ability to thrive as a 'one person team'

EDUCATION:
-Bachelor's Degree in Mechanical Engineering or Aerospace Engineering

WORK HOURS:
Full-Time

 
Job Number: 165852
Job Location: Long Beach, CA
Rate: $65000 to $98000.00 DOE
Duration: Perm
Input Date: 02/25/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Director of Technical Publications

Description:

PDS Tech is seeking candidates for Director of Technical Publications for the Regional Jet Program.
The primary work location will be Seattle, Washington, USA, with travel required to Nagoya, Japan.



Job Description



The Customer Support Director of Technical Publications is responsible for the Development, Verification & Validation, Certification Approval, Publication and Revision of all maintenance and repair documents for the program to ensure the aircraft can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team (including 3rdparties required to supplement staff) and team structure, implementing governance and communication processes, and the performance of the group.



 



Scope of Work



Processes:



  • Implement the processes and tools required to author, publish and revise all maintenance and repair documents in accordance with industry standards.
  • Manage the document development process to meet program schedule milestones.
  • Establish and manage 3rd parties required to supplement the staff.
  • Coordinate with Design Engineering and Suppliers to obtain technical information and content required to meet industry standards for document scope and content.
  • Author and publish all Instructions for Continuing Airworthiness (ICA) documents (see Deliverables and Products section for a list of ICA documents) and other industry standard manuals required for maintenance and repair of the fleet.
  • Establish the document revision process required to incorporate changes from Design Engineering as well as Customer Originated Change (COC) requests (e.g. Engineering Orders, SB accomplishment, implemented Supplemental Type Certificates, etc.).
  • Review and accept Component Maintenance Manuals (CMM) produced by Partners.
  • Author and publish Service Bulletins originating from the Airplane Change Process


“Authoring” as described above include the development of maintenance procedures, safety warnings, cautions & notes, access identification, remove/replace instructions, and test procedures.  All documents produced by this group’s activities must conform to strict formatting and publishing standards as defined by ATA S1000D and other adopted industry specifications.  Documents are revision controlled to include highlight sheets, list of effective pages, revision bars, and distributed in both PDF and SGML (selected documents only) upon approval by the required regulatory authority as applicable.



 



The primary deliverables of Technical Publications include:



  • Service Bulletins
  • Maintenance Tips
  • Aircraft Maintenance Manual (AMM)
  • Fault Isolation Manual (FIM)
  • Aircraft Recovery Manual (ARM)
  • Standard Wiring Practice Manuals (SWPM)
  • Wiring Diagram Manual (WDM)
  • System Schematic Manual (SSM)
  • Structural Repair Manual (SRM)
  • Aircraft Illustrated Parts Catalog (AIPC)
  • Corrosion Prevention Manual (CPM)
  • Non Destructive Test Manual (NDTM)
  • Maintenance Planning Document (MPD)
  • Maintenance Review Board Report (MRBR)
  • Maintenance Task Cards (MTC)
  • Illustrated Tool & Equipment Manual (ITEM)
  • Maintenance Facilities and Equipment (MFEPM)
  • Component Maintenance Manuals (CMM) –  Proprietary Parts


The Technical Publications function will be performed both in Seattle, WA and Komaki, Japan.  Third parties will be used for the initial document creation process as the permanent team is formed and capabilities are implemented.



 






      Expected Education/Experience and Skills:



      1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
      2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Technical Publication functions to commercial airline customers.
      3. Candidates must be familiar iSpec2200 and S1000D and have participated in technical publication Industry Standards groups.
      4. Candidates must have skills and experience managing Suppliers.

       
      Job Number: 1710063876
      Job Location: Seattle, WA
      Duration: 24 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHPAA4&URLSource=cjhunter

      Director, Training & Flight Operations

      Description:
      Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
      This position is located in Nagoya, Japan.  

      In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



      • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
      • Development, verification/validation and certification of flight operations manuals
      • Flight Operations Engineering support to Company's customers


      Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


      Work Location
      The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

      Scope of Work
      Specific Training responsibilities include:

      • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
      • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
      • Development and maintenance of training documentation for each course offered
      • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
      • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
      • Obtain regulator certifications such as OSD, FSB, etc.
      • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
      • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

       
      Specific Flight Operations Support responsibilities include:

      • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
      • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
        • Airplane Flight Manual (AFM)
        • Flight Crew Operating Manual (FCOM)
        • Quick Reference Handbook (QRH)
        • Weight & Balance Manual (WBM)
        • Master Minimum Equipment List (MMEL)
        • Dispatch Deviation Guide (DDG)
        • Flight Crew Training Manual (FCTM)
        • Cabin Crew Operating Manual (CCOM)
        • Aircraft Characteristics for Airport Planning (AC)



      • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
      • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
        • Performance Engineers course
        • Weight & Balance course

      • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
      • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
      • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
      • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

      Expected Education/Experience and Skills:



      1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
      2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
      3. Commercial pilots license preferred.
      4. Candidates must have skills and experience managing Partners and Suppliers.

       
      Job Number: 1710068573
      Job Location: Nagoya,
      Duration: 36 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

      Electrical (EWIS) Design Engineer - Catia V5

      Description:
      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

      Essential Functions:
      1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      2. Is consulted extensively by associates and others as a recognized authority within the field
      3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      4. Approach to problem solving balances technical product, cost and schedule
      5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
      Catia V5 Required

      Unique Skills:
      Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
      • Aerospace Experience is required
      • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
      • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
      • Knowledge of Catia V5 Electrical is required

      Education and Experience Requirements:
      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
       
      Job Number: 372888
      Job Location: Savannah, GA
      Rate: TBD
      Duration: 12 - months
      Start Date: ASAP
      Input Date: 02/24/2018
      Firm Name: CTS INTERNATIONAL
      Address: 11100 NE 8TH ST STE 800
      City, State: BELLEVUE, WA 98004
      Phone: 425/646-2688
      Fax Phone: 425/635-7630
      Email: cjhunter@ctsinternational.com
      Website: www.ctsinternational.com

      Electrical (EWIS) Engineer W/Catia V5-TS II

      Description:
      Electrical (EWIS) Engineer w/Catia V5-TS II
      Savannah, GA
      Rate: $70-$77

      Unique Skills:

      Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required


      Education and Experience Requirements:

      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

      Principle Duties and Responsibilities:

      Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

      Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7977
      Job Location: Savannah, GA
      Rate: $70-$77
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 02/19/2018
      Firm Name: INCONEN CORPORATION
      Attention: Cathy O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: cathy@inconen.com
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical (EWIS) Engineer-TS II

      Description:
      Electrical (EWIS) Engineer-TS II
      Savannah, GA
      Rate: $70-$77

      Unique Skills:

      Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


      Education and Experience Requirements:

      Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

      Principle Duties and Responsibilities:

      Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

      Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

      Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
      2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7976
      Job Location: Savannah, GA
      Rate: $70-$77
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 02/05/2018
      Firm Name: INCONEN CORPORATION
      Attention: Cathy O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Electrical Applications Engineering Contractor

      Description:
      PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
      In your role, you will:

       

      Unique Skills:



      Experience with Autocad required.

      Aerospace experience required.

      Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

      Principal Duties and Responsibilities:

      Essential Functions:

      1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


      As our ideal candidate, you will meet the following requirements:
      • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

      Education/Experience:

      • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
      • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

      POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

      PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
       
      Job Number: 1710063879
      Job Location: Savannah, GA
      Per Diem: No
      Duration: 6 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Clyde Callwood
      Address: 3922 COCONUT PALM DR STE 100
      City, State: TAMPA, FL 33601
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

      Electrical EWIS Engineer/ Electrical Apps

      Description:
      Position Purpose:
      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

      Unique Skills:
      • Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
      • Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
      • Select qualified electrical components such as connectors, backshells, and other parts.
      • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
      • Aerospace Experience is required
      • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
      • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
      • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

      Education and Experience Requirements:
      • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
      • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
      • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



      Essential Functions:
      • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      • Is consulted extensively by associates and others as a recognized authority within the field
      • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      • Approach to problem solving balances technical product, cost and schedule
      • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
       
      Job Number: 24-204
      Job Location: Savannah, GA
      Rate: $58 - $63
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 02/22/2018
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      Electrical EWIS Engineer/EHI

      Description:
      Position Purpose:

      Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services


      Unique Skills:


      • Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
      • Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
      • Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
      • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
      • Aerospace Experience is required
      • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
      • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
      • Knowledge of Catia V5 Electrical is required

      Education and Experience Requirements:

      • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
      • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
      • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

      Principle Duties and Responsibilities:

      • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
      • Is consulted extensively by associates and others as a recognized authority within the field
      • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
      • Approach to problem solving balances technical product, cost and schedule
      • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
      • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
       
      Job Number: 24-205
      Job Location: Savannah, GA
      Rate: $58 - $63
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 02/22/2018
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Email: matt@precisionpersonnel.com
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Engineer

      Description:
      Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
      Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


      JOB RESPONSIBILITIES

      • Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
      • Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
      • Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
      • Typically focuses on existing products or processes.
      • Liaises with drafters, technicians, and others to contribute to project completion.
      • Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
      • Performs other related duties as required.



      MINIMUM REQUIREMENTS:
      • Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
      • Aerospace industry experience is strongly preferred.
      • Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
       
      Job Location: Everett, WA
      Rate: Negotiable
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 12/01/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Andrew Walbert
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Website: www.acsicorp.com

      Electrical Harness Installation Engineer-Special Missions

      Description:
      Electrical Harness Installation Engineer-Special Missions
      Savannah, GA
      Rate: $58-$63

      Unique Skills:

      Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

      Job description:

      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

      Position Purpose:

      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

      Principal Duties and Responsibilities:
      Essential Functions:
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned
       
      Job Number: 7876
      Job Location: Savannah, GA
      Rate: $58-$63
      Per Diem: Yes
      Overtime: Possible
      Duration: LT
      Start Date: ASAP
      Input Date: 02/19/2018
      Firm Name: INCONEN CORPORATION
      Attention: Cathy O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: cathy@inconen.com
      Website: www.inconen.com

      Electrical Harness installation Engineer

      Description:
      PDS is seeking an Equipment and Furnishings Engineer for an open position in Savannah, GA.


      Unique Skills:



       Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.



      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of  products and services

      Principal Duties and Responsibilities:
      Essential Functions
      :
      1. Contributes to planning, developing and coordinating of important engineering projects
      2. Provides specialized technical assistance to team members
      3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
      4. Determines and develops own approach to solutions within schedule and cost objectives
      5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      6. Acts as liaison with representatives outside of the assigned group/area

       Additional Functions:
      1. Actively works to improve daily processes and ensures all work meets customer requirements
      2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
      3. Performs other duties as assigned



       

      Education and Experience Requirements:
      Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.



      Other Requirements:

      1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


       
      Job Number: 1710073229
      Job Location: Savannah, GA
      Duration: 6 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jyotsna Sivan
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FlGAAU&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Instrumentation Engineer 377563

      Description:
      • Candidates should have experience with Creo Parametric and Creo Cabling.
      • Experience with Creo Schematics; Windchill; and Modelcheck preferred
      • Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.
      • Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
      • Experience is design of cables and harnesses for applications for Aerospace products.
      • Proficiency in use of Creo PDM/Link and Windchill.
      • Additional proficiency with GD&T and tolerance analysis.
      Skills:
      • Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
      • Previous experience with MODELCHECK preferred
      • Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: Large Assembly Management, Simplified Representations, Combination States Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps Mechanism Design
      • Advanced part modeling techniques including the use of relations, analysis features, and flexible components
      • Experience with Creo Cabling including Utilizing logical reference data (automated routing) Harness flattening using Creo Harness-MFG extension
      • Working knowledge of Creo Schematics 2.0 desired including: Block Diagram to Wiring Diagram
      • Schematic Development (aka BID to WID) Diagram creation utilizing a Central Catalog
      Education:
      • BSME with 10 years of experience or 15 + years of equivalent experience
       
      Job Number: 377563
      Job Location: California, Canoga Park
      Rate: Negotiable
      Duration: 6 months +
      Input Date: 10/31/2017
      Firm Name: CDI CORPORATION
      Attention: Jenesis Omaga
      Address: 17177 PRESTON RD STE 300
      City, State: DALLAS, TX 75248
      Website: www.cdicorp.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Engine Control Logic Analyst

      Description:
      Engine Control Logic Analyst

      Jupiter, FL
      1 year Contract
      Pay Rate: $60.00-70.00/Hr

      1st Shift

      Duties:
      Engine Control Logic Analyst to support Hypersonics program.



      ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



      ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      ** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



      Keywords:

      -Hypersonics

      -Control Systems

      -Requirements

      -Programming

      -Embedded Software

      -Logic

      Skills:
      Required:

      Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
      Good technical writing skills.
      Project/schedule management skills.
      Requirements generation skills.
      Ability to translate engine operation requirements into engine control logic flow diagrams.
      Proficiency with MS Office: Word, EXCEL and Powerpoint.
      Desired:

      Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
      Experience with linear model generation and control loop gain sizing and stability analysis.
      Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


      Education:
      B.S. or M.S. in Mechanical or Aerospace Engineering
       
      Job Number: 7883
      Job Location: Jupiter, FL
      Rate: 50-70
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 year
      Start Date: ASAP
      Input Date: 11/27/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Engineer Structural- 5- Secret Clearance

      Description:
      PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

      Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
      Ensure that 
      designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
      The analyst may also be expected to derive non-flight applied loads, create, extract and 
      distribute internal loads, and perform weight and stiffness optimization. T
      ools utilized may include FEMAP, NX,Teamcenter 
      and other software applications.

      Basic Qualifications:



      Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




      Preferred Qualifications:



      Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

       


       
      Job Number: 1710075260
      Job Location: Melbourne, FL
      Duration: 6 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Elisa Petersen
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L3MAAU&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Engineer, Analysis / Systems Engineering (Aero Thermal Fluids) Level III CA

      Description:
      Job Title: Engineer, Analysis / Systems Engineering (Aero Thermal Fluids) Level III

      Number of Positions: 4

      Remaining Positions: 4

      Duties:
      ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



      -Analysis and Design of aerospace propulsion systems at the component and system levels, specifically addressing liquid rocket engines.

      -Work will require use of heat transfer analysis tools, along with related fluid dynamic and combustion tools.

      -Work with ATF Lead engineers and other senior engineers in a team setting to accomplish defined goals.

      -Conduct thermal and fluid analyses related to the design, test and verification of liquid rocket engines.

      -Specific job assignments may entail analytic modeling, defining thermal and fluid boundary conditions and conducting computer simulations to assess the thermal response and performance of engine hardware.

      -Additional responsibilities may include pre- and post-test analysis including data analysis of test results.

      -Further requirements include documentation of Program and ATF Discipline results.

      Skills:
      Required:

      -Relevant college coursework in thermodynamics, heat transfer, and fluid dynamics.

      -2 to 4 years of related professional experience.



      Desired:

      -M.S. degree in Mechanical or Aerospace engineering.

      -Advanced college coursework in thermodynamics, heat transfer, and fluid dynamics.

      -Propulsion analysis experience in liquid rocket engine or gas turbine engines.



      Keywords:

      Heat transfer, fluid dynamics, analysis, modeling, simulation

      Education:
      B.S. degree in Mechanical or Aerospace engineering

      Skills:
      Required

      HEAT TRANSFER FLUID DYNAMICS SIMULATION THERMAL ANALYSIS

      State/Province: California
      City/Town: Canoga Park

      Start Date: 10/30/2017 Hours Per Week: 40.00
      Est. End Date: 09/30/2018 Hours Per Day: 8.00
      Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
       
      Job Number: MB-7359407
      Job Location: Canoga Park, CA
      Rate: 46/hr max
      Duration: 12 month contract
      Input Date: 12/01/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      Engineering Design 1/2 (3) - FL - C

      Description:
      RESPONSIBILTIES:
      Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
      Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

      REQUIRED EXPERIENCE:
      Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
      Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
      Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
      Preferred Qualifications:
      Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

      EDUCATION:
      Bachelors in Science Mechanical Engineering, or Master's degree.

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      HOURS:
      9/80 workweek

       
      Job Number: 162898
      Job Location: Melbourne, FL
      Rate: $28 to $40.00 DOE
      Duration: 9-12 months
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Melody Mullins
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: mmullins@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      FMEA Engineer for Electrical Equipment Racks

      Description:
      FMEA Engineer

      My client is looking for an FMEA Engineer to do FMEA on electrical equipment racks for an aerospace application. This is a 3-6 month contract position. There may be two positions. The location is Centennial, CO.

      Here is the job description:

      FMEA Engineer

      • Perform FMEA on electrical equipment racks for a major aerospace customer. The ideal candidate will have both electrical and mechanical experience.

      • Aerospace or Defense experience is a must.

      • This project will start in by December 1, maybe sooner.


      The location is Centennial, CO.

      The rate is open. The duration is 3-6 months.

      US citizens and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time. You must pass a background check and drug screen.

      If you are interested in this position, please send me your current resume, desired rate, and the best time and way to reach you.


      If you are not interested, please feel free to send this to anyone you feel would be qualified as I pay for referrals whether you work for me or not. Thanks for your help!

      Thank you!
       
      Job Number: mm171108cjFMEA
      Job Location: Centennial, CO
      Per Diem: Possible
      Duration: 3-6 months
      Start Date: ASAP
      Input Date: 11/08/2017
      Firm Name: PRODUCTIVE DATA SOLUTIONS INC
      Attention: Michael Mendocha
      Address: 6870 W 52ND AVE STE 107
      City, State: ARVADA, CO 80002
      Phone: 303/220-7165
      Fax Phone: 303/220-7425
      Website: www.pdsinc.com

      Fire Protection Engineer -- Aerospace

      Description:
      Job location: Overseas

      Contact:
      Morgan at (585) 441-9800 x104 or
      Nicholas at (585) 441-9800 x126


      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Overseas/International
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Morgan or Nicholas
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x104 or x126
      Email: morgan.ricklefs@noramtecna.com; nicholas.salsedo@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Flight Controls Engineer

      Description:
      Flight Controls Engineer
      Duration: 12+ months
      Pay Rate: $85/hr

      Senior Flight Control Engineer Responsibilities:
      Develop Flight Control Laws and control algorithms to meet vehicle performance, flying qualities, and stability margins on ground and in flight.
      Support definition of Flight Control System specifications and requirements and Flight Control Law requirements for handling qualities, sensors, actuators, and controllers.
      Design, develop, and test autopilot and associated logic functions.
      Develop modeling and simulation of dynamic systems
      Develop six-degree-of-freedom (6DoF) digital simulation models and computer code.
      Conduct engineering analysis, studies, and performance assessments.
      Integrate models into software and hardware-in-the-loop simulation environments. * Verify and validate Flight Control Systems through testing in desktop simulation environment, systems integration labs, aircraft flight test, and aircraft/system qualification and certification activities.
      Perform hardware / software integration and testing on flight simulator devices, including pilot in the loop testing.
      Support analysis of system architecture, redundancy management, electronic hardware design and integration, and actuator design and integration.
      Support development of Operational Flight Program software.
      Work closely with engineers of varying disciplines and aircraft Subject Matter Experts to meet flight simulator regulatory and customer training requirements
      Participate in engineering design reviews.
      Keep current on future technologies and products
      Analyze air vehicle flight test data and support flight test activities
      Senior Flight Control Engineer Desired :
      8 years or more experience in flight control law development for aerospace vehicles.
      Knowledge of aircraft and aerospace systems with emphasis on flight dynamics, propulsion and ground reaction forces.
      Knowledge of reversible and irreversible flight control systems.
      Knowledge of MIL-HDBK-1797, MIL-F-8785C; MIL-F-9490D; DO-178B
      Simulation Experience
      Experience with planning and conducting flight tests, and post test data evaluation.
      Excellent verbal and written communication skills
      Excellent Organizational Skills and problem-solving skills
      Strong team player
      Excellent computer skills, including word, excel and powerpoint
      Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran
      Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
      Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA is highly desired
      Senior Flight Control Engineer Education/Certifications Required:
      BS or MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering (or related field).
      ITAR Requirements:
      To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

      The Structures Company, LLC is an AA/EOE
       
      Job Location: Mojave, CA
      Rate: $75-85/hr
      Per Diem: yes
      Overtime: yes
      Duration: Long-term
      Start Date: ASAP
      Input Date: 11/08/2017
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Chris Sheets
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Website: www.thestructurescompany.com

      Flight Sciences -- Performance

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      Flight Sciences -- Stability & Controls

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      Flight Test -- Troubleshooting Processes

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Flight Test Design

      Description:
      The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

      Duties and Responsibilities:
      1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
      2. Applies principles of chemistry, physics, and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes. Applies material properties and design allowables, processing processes and quality engineering specifications.
      3. Designs structural products and components of products, as well as Systems level integration, evaluates alternatives including cost and risk, supportability and analyses for total systems. Analyses are performed at all levels of total system to include: concept, design, fabrication, installation, and operation.
      4. Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
      5. Supports fabrication and installation of test equipment.
      6. Resolves all issues related to design, documentation, procurement, fabrication, and installation.
      Education, Work Experience, Certification and/or Licensure:
      1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
      2. 5 years’ experience in aerospace design and testing.
      Knowledge, Skills and Abilities:
      1. Proficient in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
      2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
      3. Strong computer operating systems skills.
      4. Excellent oral and written communication skills.
      5. Excellent interpersonal skills.
      6. Experience with aircraft data acquisition systems.
      7. Experience with FAA regulations.
      8. Excellent analytical skills.
       
      Job Number: 28-017
      Job Location: Greensboro, NC
      Rate: $35-$50
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/18/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Flight Test Engineer

      Description:
      Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

      We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

      Essential Functions:
      Coordinate test and certification requirements.
      Author flight test and ground test plans including test hazard analysis.
      Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
      Support instrumentation installation as required.
      Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
      Support flight and ground test conduct and data collection.
      Analyze test data and evaluate compliance with regulations.
      Prepare certification test reports.
      Domestic and occasional international travel is required.
      Desired Qualifications:

      5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
      Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
      Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
      Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
      A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
      Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
      Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
      Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
       
      Job Location: Moses Lake, WA
      Per Diem: possible
      Overtime: Yes
      Duration: LT
      Start Date: asap
      Input Date: 12/07/2017
      Firm Name: VELOCITY CONSULTING SOLUTIONS
      Attention: Susan McGlinsey
      Address: 20306 15TH AVE NE STE A
      City, State: SHORELINE, WA 98155
      Phone: 206/812-1061
      Website: www.velocity-cs.com

      Flight Test Equipment -- Management/Coordination

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Flight Test Instrumentation Engineers

      Description:
      Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
      This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

      The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

      Job Duties and Responsibilities (Essential Functions):

      � Provide instrumentation services: to include:
      o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
      o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
      o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
      � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
      � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


      Knowledge/Skills/Abilities:
      � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
      o Electrical and avionics design,
      o Data Systems Design Principles
      o Telemetry
      o Air data booms (straight nose and swivel-head)
      o Static trailing cones
      o Sensitive aircraft instruments
      o Cockpit displays
      o End-user interface
      o Portable test equipment such as hand-held stick force gauges
      o High-end GPS receivers and antennas for precise aircraft positioning
      o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
      o Pressure transducers
      o Flowmeters
      o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
      o Strain gauges, load cells, force transducers, torque sensors
      o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
      o Video recording equipment
      o Signal conditioners
      o Data acquisition systems and data loggers
      � Intermediate knowledge of flight test operations and flight certification.

      Level Requirements (Minimum):
      Education
      � Formal Instrumentation Training (Military or Civilian) � Preferred
      � BS in Engineering or equivalent experience

      Experience
      � 5+ years relevant technical experience
      � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
       
      Job Number: #301-Flight Test Instrumentation
      Job Location: Moses Lake, WA - Washington
      Rate: Open
      Per Diem: Possible
      Overtime: Yes
      Duration: 2-3 years or direct
      Start Date: ASAP
      Input Date: 01/23/2018
      Firm Name: VELOCITY CONSULTING SOLUTIONS
      Attention: Susan McGlinsey
      Address: 20306 15TH AVE NE STE A
      City, State: SHORELINE, WA 98155
      Phone: 206/812-1061
      Website: www.velocity-cs.com

      Flight Test Management

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      Flight Test Project Engineers

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Ground Support Equipment Design Engineer IV

      Description:
      Support Equipment Design Engineer IV

      Location: Canoga Park, CA
      Pay Rate: DOE ($50/hr - $60/hr)
      Duration: 6 month W2 contract
      Shift: Regular 40 hour week, OT possible
      **MUST be a U.S. CITIZEN**
      ** Dual citizens and Permanent Residents are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      Duties:
      ** Ground Support Equipment (GSE) experience is required.
      ** Creo experience is required **
      ** 10+ years experience and a Bachelors Degree or equivalent are required **
      **(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

      -Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
      -Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
      -Leads preliminary and critical design review preparations.
      -Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
      -Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
      -Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

      Skills:
      -Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
      -Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
      -In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
      -Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
      -Must be an experienced engineer with knowledge of CAD using PTC Creo2.
      -Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
      -Pre-verification of CAD models and drawings in the PLM system is also required.
      -Effective interpersonal and communication skills and must be able to operate effectively in a team.
      -Expert knowledge of reading and interpreting drawings and related specifications is also required.
      -Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.

      Education:
      -Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
      -Experience in Design and Manufacturing is a must.

      Skills Required:
      GROUND SUPPORT EQUIPMENT CREO AEROSPACE
       
      Job Number: 8235
      Job Location: Canoga Park, CA
      Rate: 50-60
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 mos
      Start Date: ASAP
      Input Date: 01/24/2018
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Industrial Engineer - 2- DoD Secret and Special Access Clearance

      Description:
      PDS Tech, Inc. is seeking a candidate for Industrial Engineer - 2- DoD Secret and Special Access Clearance position located in Moss Point, MS. 

      Position Summary / Responsibilities



      • Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.
      • May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations.
      • Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems.
      • On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.
      • May assist facilities engineers in the planning and design of facilities.

      Qualifications:
      Basic Qualifications:
      • Bachelors of Science Degree in Science, Technology, Engineering or Math (STEM), and 2 years relevant work experience. 
      • The ideal candidate will have experience in an Industrial Engineering role, aerospace manufacturing processes, MES/SAP and EVMS. 
      • Must be able to Obtain and Maintain an Active Secret Clearance with SAP.

       
      Preferred Qualifications:

      • Active DoD Secret and Special Access Clearance.

       
      Job Number: 1710072335
      Job Location: Moss Point, MS
      Duration: 23 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000023AaZAAU&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Inspector – Fabrication/Assembly (KS)

      Description:
      The general purpose of a Quality Inspector at Client Facility is to provide first article, in-process and final inspections supporting manufacturing needs while ensuring products prescribe to the appropriate engineering and specifications.
       
      Major functions of an Inspector at Client Facility are to perform an assortment of inspections including First Article, in-process, and final inspections using standard measuring equipment for determining product quality and completing the required paperwork indicating the results once the inspection is completed.

      It is the responsibility of the Inspector to make educated decisions when accepting or rejecting products based on the applicable specifications and engineering.
       
      The Inspector is responsible for documenting inspection results according to Client policy and procedures including controlling the whereabouts and identification of non-conforming products discovered during the inspection process.  

      The inspector at Client Facility is responsible for documenting his/her time and on jobs inspected using JobBoss. 

      The Inspector is responsible for prioritizing his/her inspection workload to support the overall organization’s goals as well as reduce and identify potential risks of potential production stoppages. He/she will also work with manufacturing personnel to explain and resolve issues discovered to be nonconforming at the time of the inspection.
        
      A Quality Inspector at Client Facility must be able to fluently perform or have the following necessary skill sets:
      • Read blueprints • GD&T • Computer skills (i.e. Microsoft Word, Excel, Access) • Use and read SME and perform all layout inspections as necessary • Experience with an AS 9100 quality management system • Experience in performing gage R&R studies  
      • Experience with an effective calibration system • Meet Welding Inspector Specialist or Assistant work experience/and or education requirements • CMM operations/programming experience and/or certification (Preferred – Not Required).
       
      An Inspector at Client Facility may also perform the following tasks including but not limited to: 
      • Perform inspections off-site • Work with Production, Engineering, and other departments, as appropriate, to develop problem resolution plans • Participate in root cause analysis studies and provide inputs to corrective actions, as required • Work with production and other departments to establish inspection methods to be employed for new products. • CMM operators/programmers may also perform the following tasks: o Write or edit programs for precision machinery. o Ensure that precision machinery is in working condition and properly calibrated. o Determine program requirements based on design and engineering requirements. o Operate precision machinery as needed. 

      A high school diploma or equivalent is required. 

      • Inspection experience and reading blueprints in a manufacturing environment can be substituted for education requirement. 
      A quality inspector at Client Facility must have minimum of (2) years of inspection experience and reading blueprints in a manufacturing environment. 
      • Post High school education may be substituted for experience requirements. 

      Certified as an NDT Level I, II, or III in the Florescent Penetrant Inspection scheme is preferred but not necessary. 

      Certified as a Weld Inspector is preferred but not necessary.
       
      Certified to operate/program CMM precision machinery is preferred by not necessary. 

      An Inspector at Client Facility must be able to pick up 50 pounds without assistance in standard conditions and in a normal working environment.  He/she must be able to stand when performing inspections and have the physical ability to perform inspections throughout the manufacturing environment. 
       
      Requirements:
      Will be working on-site at one of Client's Suppliers. Position is located in Neodesha, KS.  This is a small town in Southeast Kansas (85 miles from Joplin, MO and 108 from Wichita, KS.

      The manager with Client Facility will be holding phone interviews.

      There is the possibility of direct hire for the right person.

      Below are primary experiences they are looking for:
      Experience with FAI submittals through Net Inspect is preferred.
      CMM operating experience is preferred but not required. Our operational CMM is a Mitutoyo Bright manual CMM. We can provide OJT for its operation.

      Experience with ‘bench top’ inspection is required - Precision hand measuring tools and blueprint reading.

      Working knowledge of Quality Management System as it pertains to Aerospace (AS9100) is required.
       
      Job Number: FD-559722KS
      Job Location: Neodesha, KS
      Per Diem: Yes - Possible
      Overtime: Possible
      Duration: 3 Months then possibly Direct Hire
      Start Date: 12/01/2017
      Input Date: 11/16/2017
      Firm Name: FOSTER DESIGN INC
      Attention: Recruiter
      Address: 200 W DOUGLAS AVE STE 110
      City, State: WICHITA, KS 67202
      Phone: 316/832-9700
      800 Phone: 800/345-3394
      Fax Phone: 316/832-9357
      Website: www.fosterdes.com

      Instrumentation Engineers

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      Instrumentation Technicians

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      Machinist (2) - UT

      Description:
      Chipton-Ross is seeking a Machinist (2) for an opening in Park City, UT.

      RESPONSIBILITIES:
      Sets up and operates a variety of machine tools such as OD/ID Grinders, Spur Gear Grinders, CNC Lathes and Mills to make aerospace parts to sketch and print. Uses a variety of machinist's hand tools and precision measuring instruments, analytical gear checker; makes standard shop computations relating to dimensions of work, tooling. Will monitor and verify quality in accordance with statistical process or VIP.

      REQUIRED EXPERIENCE:
      -Completion of a formal apprenticeship
      -5 plus years' experience.
      -Mathematical Skills
      -Mechanical Skills
      -Detail Oriented
      -Time Management Skills
      -Ability to read and interpret blueprints
      -Knowledge of technical functions
      -Knowledge of computer skills
      -Ability to work well within a team as well as individually
      -Ability to communicate effectively in writing and verbally

      EDUCATION:
      Accredited High School Diploma/GED

      WORK HOURS:
      Full-Time

       
      Job Number: 166363
      Job Location: Park City, UT
      Rate: $20 to $26.00 DOE
      Duration: 6 months CTH
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Chris Conaway
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: cconaway@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Manufacturing Engineer - Level 1

      Description:
      Location: Lexington, KY
      Rate: $20.00 - $35.00/HR
      Duration: 1 year contract

      **MUST be a U.S. Citizen**
      **MUST have an Active Secret Clearance or to have had one with the last two (2) years**

      Job Description:
      - Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
      - Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
      - Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
      - Adapts machine or equipment design to factory and production conditions.
      - May incorporate inspection and test requirements into the production plan.
      - Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
      - Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
      - Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
      - Ensures processes and procedures are in compliance with regulations.

      Skill/Experience/Education
      Mandatory:
      - Mechanical, Electrical, Aerospace Engineering Degree.
      - 1st, 2nd or 3rd shift schedules may be required.
      - On-aircraft and off operations.
      - In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
      - The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
      - This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
      - The employee will work with manufacturing on issues and process improvements.
      - Active Secret Security Clearance within the last 2 years.

      Desired:
      - Job scope experience
      - Team Center Engineering experience
      - Production Engineering experience
      - Production Operations experience
      - Mechanical Experience
      - Electrical Experience
      - Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
      - Ability to read and interpret engineering drawings
      - Excellent verbal and written communications skills
       
      Job Number: 7709
      Job Location: Lexington, KY
      Rate: $20.00 - $35.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 02/14/2018
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Manufacturing Engineer -Precision Rotating Components - UT

      Description:
      Chipton-Ross is seeking a Manufacturing Engineer - Precision Rotating Components for an opening in Park City, UT.

      RESPONSIBILITIES:
      -Creating process planning and manufacturing instructions, including sketch sheets for high speed spur gears, bevel gears and shafts
      -Designing tools and fixtures, investigating root cause of rejections that occur during the manufacturing and assembly of precision rotating parts and other components
      -Determining possible corrective actions to resolve the problem and eliminate repeat occurrences
      -The Manufacturing Engineer will have the authority to make decisions on and implement appropriate corrective / preventative action.
      -This employee shall also be required to perform other tasks on occasion including but not limited to auditing processes, manufacturing support, inspecting hardware, travel, and participate in continuous improvement activities.

      REQUIRED EXPERIENCE:
      -3 years manufacturing and process planning experience with carburized precision rotating parts
      -Strong analytical skills
      -Precision shaft manufacturing and inspection knowledge
      -Familiarity with basic precision measuring tools
      -Working knowledge of GD&T
      -Basic Computer Skills: proficient with Microsoft Word & Excel etc.
      -Capable of effectively reading blueprints and specifications
      -Three years 3D modeling experience. Preferably with Pro Engineer/Creo
      -Gear, 4 and 5 Axis Housing manufacturing and

      PREFERRED EXPERIENCE:
      process planning experience a plus
      -Familiarity with aerospace standards and FAA regulations a plus

      EDUCATION:
      -Bachelors of Science in Manufacturing Engineering or 5 years' experience

      WORK HOURS:
      Full-Time

       
      Job Number: 166361
      Job Location: Park City, UT
      Rate: $65000 to $85000.00 DOE
      Duration: Perm
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Johnnie Barrientos
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jbarrientos@chiptonross.com
      Website: www.chiptonross.com

      Manufacturing Engineer II/III

      Description:
      Location: Canoga Park, CA
      Rate: $30.00 - $48.00/HR (DOE)
      Duration: 6 month contract
      Shift: Regular 40 hour week. OT Possible


      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      ** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


      Duties:
      The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


      Skills:
      Required Skills:
      -Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
      -The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

      Desired Skills:
      -Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
      -Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
      -Project management skills and MS Office applications ( Word, Excel).
      -Experience with Maestro, Delmia and Windchill are preferred, not required.
      -Aerospace experience preferred but not required.

      Keywords:
      -Manufacturing Engineer
      -Propulsion components


      Education:
      - BS degree in Manufacturing /Industrial Technology or Engineering required
       
      Job Number: 8010
      Job Location: Canoga Park, CA
      Rate: $30.00 - $48.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 mos
      Input Date: 02/19/2018
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Email: patrick@inconen.com
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Manufacturing Engineer III - (PA) - Electrical/Electronics

      Description:
      Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

      achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

      MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Model Based Instructions (MBI) Authoring, Wire & Equipment Installation, Assy and Integration and Aerospace.
       
      Job Number: MFGEeePA
      Job Location: Ridley Park, PA
      Rate: OPEN
      Per Diem: YES
      Overtime: Possible
      Duration: 6+ Months
      Start Date: ASAP
      Input Date: 12/01/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Andrew Walbert
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Website: www.acsicorp.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Material Handler

      Description:
      Velocity represents an internationally known leader in the design and manufacture of aerospace fastening, bushings and fittings. Our client has developed innovative products for both metal and composite applications that are used on commercial and military rotor and fixed wing aircraft worldwide. Their products are approved and used by virtually every airplane and helicopter manufacturer. Our client is currently looking for a Material Handler for its manufacturing operation in Tukwila, WA.
      Key Responsibilities:
      • Must be able to read and understand drawings and blueprints.
      • Must be familiar with network driven data sources. (Epicor, PLM, Internet Explorer, etc.)
      • Must be able to operate Industrial Band Saws, Overhead Crane, Pallet Jacks, Forklifts, Snips, and Bander, with little or no assistance.
      • Become proficient in load pulling, load preparation, and truck loading, with training.
      • Learn and understand material requirements, to assist Engineers, Buyers, and Planners with material planning and substitutions.
      • Calculate and cut raw material stock, per specified cut instructions.
      • Must be able to understand and follow verbal and written communications, in English.
      • Must be able to assist Raw Material Lead with other duties, as assigned.
      • Must wear and maintain proper Personal Protective Equipment (PPE), at all times.
      Core Competencies Required for this Position:
      • Computer skills, including knowledge of Internet Explorer, Word, and Excel.
      • Experience with precision measuring equipment and industrial power tools.
      • Effective communication skills
      • Ability to take direction from Lead, Supervisor, or Manager. • Ability to work under pressure and with deadlines. • Strong organizational skills.



      Qualifications:
      • High School Diploma or GED.
      • Previous experience working in a machine shop environment.
      • Strong background in Inventory, Receiving, and Dispatch environment.
      • Ability to communicate/follow instructions or directions, in English, verbally and in writing.
      • Ability to complete all required documentation.
       
      Job Location: Tukwila, WA
      Start Date: ASAP
      Input Date: 11/13/2017
      Firm Name: VELOCITY CONSULTING SOLUTIONS
      Attention: Susan McGlinsey
      Address: 20306 15TH AVE NE STE A
      City, State: SHORELINE, WA 98155
      Phone: 206/812-1061
      Website: www.velocity-cs.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Mechanical Engineer

      Description:
      From the Hiring Manager:

      *** Looking for a Mechanical Engineer who has prior hands-on mechanical design experience along with the working knowledge / understanding of the assembly / fabrication process
      *** This position is an open-ended position (12+ months to perm) working on multiple contracts extended over the next 3 years (36 months).
      *** SolidWorks is a must; should have Production / Manufacturing experience working for government customers (Defense, Military, etc) and not someone with all Aerospace experience
      *** Although this position is labeled as a “contract position”, he’s looking for someone who wants to further their career and grow with an established industry leading company. You will be hired to work on several projects / prime contracts, which gives this position stability & job security for the next 3+ years.

      Summary:

      The Mechanical Engineer will assist in the creation of proposals for technical solutions to government customer solicitations by researching, brainstorming and developing new mechanical design solutions. The projects will require solutions that ensure functionality, quality, reliability, cost and manufacturing capability for a range of specifications. The Mechanical Engineer will create and maintain the project specifications and develop the design and other aspects of the project plan including schedule, resources and costs.

      Responsibilities:

      > Design and analyses of technical development projects, mechanical systems with multiple moving parts
      > Defining project specs and project plans
      > Working with manufacturing processes/systems and the ability to translate this knowledge into design direction for new designs and existing product improvements
      > Independently create structural analyses of machinery and small scale architectural assemblies
      > Work with structural analysis tools, both manual calculations and automated software approaches (FEAs)
      > Work with weldments and/or welded structures
      > Exhibit fluency in parts/assemblies
      > Exhibit an understanding of, and experience with, MIL-STD-810 environmental requirements and resulting design issues
      > Product validation and durability testing
      > Initiate and lead cross functional team meetings and design reviews to complete mechanical design (concept through launch)
      > Apply DFM/DFA principles to the mechanical design and creating multiple concepts, thoroughly evaluating each, and presenting them for design reviews by peers.

      Requirements:

      > Bachelors/Masters in Mechanical Engineering & 5–10+ years in mechanical project engineering experience
      > Proficient in Solid Works, and ASME Y14.100
      > Experience with R & D for government customers preferred

      Mark A Ludwig
      Vice President
      Global American Staffing
      Email: mludwig@globalams.us
      Direct: (508) 434 – 6180
      Office: (508) 230 – 5030 x123
       
      Job Number: 041_2017
      Job Location: Elkridge, MD
      Rate: DOE
      Per Diem: Split Possible
      Overtime: Yes / Possible
      Duration: Long-Term
      Start Date: ASAP
      Input Date: 12/05/2017
      Firm Name: GLOBAL AMERICAN STAFFING
      Attention: Mark A Ludwig
      Address: 12 HARDING ST STE 204-205
      City, State: LAKEVILLE, MA 02347
      Phone: 508/230-5030
      800 Phone: 800/510-8050
      Fax Phone: 508/923-0005
      Website: www.globalamericanstaffing.com

      Mechanical Engineer 4- Secret

      Description:
      PDS Tech, Inc. is seeking a Mechanical Engineer 4 in Melbourne, FL with an active DOD secret clearance. 

      Position Summary / Responsibilities

      Candidate will be responsible for structural design and leading a team of Electrical/Mechanical Lab Design engineers and structural designers in the development of primary and secondary metal and composite structure parts and assemblies for both new and existing Laboratories.  Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines. 



       


       

      Mechanical Lab Design Engineer



      • Proficiency with the NX-Teamcenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential
      • Active in scope Secret Clearance required. 
      • Strong MS Office skills, Nx/CATIA Teamcenter and proficient in MS Office Skills, strong technical writing abilities.
      • Bachelors Degree in Mechanical Engineering, STEM Degree or equivalent years of experience in support of aerospace mechanical system and  subsystem design and test operations. 
      • Level 4 (3 Positions) : 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


       


      Preferred Qualifications:
      Current DoD Secret Clearance Required.

      Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required.


       
      Job Number: 1710067308
      Job Location: Melbourne, FL
      Duration: 9 months
      Input Date: 02/23/2018
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Rebecca Burrows
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: http://jobs.pdstech.com/job-detail?id=a1i500000021nw2AAA&URLSource=cjhunter

      Mechanical Systems -- Braking, Gearing, Pneumatics

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Mechanical Systems Design & Analysis Engineer II - CA

      Description:
      Basic Qualifications:
      • Bachelors’ degree in Mechanical Engineering, Physics, Material Science or related field + 2 years relevant experience
      • Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
      o Use of block part libraries
      o Generation of multilayer drawing packages, detailed assembly views, and schematics
      • Demonstrated working knowledge of basic GD&T principles
      • Sound working knowledge of Finite Element Analysis techniques and basic thermal analysis, preferably using Inventor Pro Suite Analysis package (including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
      • Background in tooling design a plus


      Essential Job Functions:
      Design solar panels and solar panel components in AutoCAD / Inventor Pro Suite. Also design and update searchlight and advanced illumination assemblies in AutoCAD / Inventor Pro Suite as required.
      Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others. Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
      Work with Illuminations Engineers to generate and update part and assembly documentation needed for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and model management in VAULT.
      Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective. Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed designs.
      Provide support to tooling design team on an as needed basis.
      Use Finite Element Analysis to support new design development and Root Cause investigations.

      Knowledge Desired:
      Candidate must be proficient and efficient in use of AutoCAD / Inventor Pro Suite 11 (or higher) in both 2D and 3D and have a sound working knowledge of basic GD&T principles.

      Candidate must also have prior knowledge and experience in generating and running finite element analysis, preferably using Analysis package in AutoCAD / Inventor Pro Suite.

      Ability to compile and present data using excel and powerpoint, and to generate/update procedural documentation using MS Word, a strong foundation in mechanical engineering and/or material science, as well as familiarity with basic physics of solar cells, Aerospace materials, and assembly techniques, PCBs and electronics are all considered as pluses.
      Essential Physical/Mental Requirements:
      Candidate must be highly adaptable to meet changing priorities in support of manufacturing, engineering, and marketing needs. Must have good people skills and be able to communicate effectively with a diverse group of both internal and external customers and colleagues.
      Must be willing to embrace change and learn new skill sets as needed in order optimize processes and procedures and address balancing workloads in a dynamic market environment.
      Special Requirements:
      The ideal candidate should be flexible, able to support evening and weekend work on an as needed basis, and self-motivated. Must be adept at working in a fast paced environment to complete scheduled milestones as planned.

      Bachelors degree in Mechanical Engineering, Material Science, Physics, or related field + 2 years relevant experience (or equivalent certification) in Computer Aided Design.

      Experience Desired:
      Must be proficient in:
      • reading/generating electrical schematics
      • quickly generating 2 and 3 D models using block part libraries
      • use of multi-layer drawing structure
      • generating assembly detail views

      The ideal candidate must also have a demonstrated working knowledge of basic GD&T principles for evaluating manufacturing tolerances and dimensional stack-ups, and have prior experience in generating/running finite element analysis models. Prior experience in use of Autodesk VAULT is highly desired.

      Experience in packaging design and/or wiring assembly is also desirable.
       
      Job Number: MechEngIICA
      Job Location: Sylmar, CA
      Rate: OPEN
      Per Diem: YES
      Overtime: Possible
      Duration: 12+ Months
      Start Date: ASAP
      Input Date: 11/03/2017
      Firm Name: AMERICAN CYBERSYSTEMS
      Attention: Janice Plattner
      Address: 1750 112TH AVE NE STE C228
      City, State: BELLEVUE, WA 98004
      Phone: 425/605-2321
      Fax Phone: 425/558-0688
      Website: www.acsicorp.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Model Based Systems Engineering (MBSE) Technical Specialist

      Description:
      Location: Canoga Park, CA
      Rate: DOE
      Duration: 6 month contract


      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      Duties:
      -The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
      -Knowledge of Jazz Team Server (JTS) enterprise management is useful.
      -An intermediate level of practice as a SysML Model User and Builder is desired.
      -Understanding of how these applications are deployed and used in the aerospace industry is preferred.
      -Rocket engine or propulsion system domain knowledge is desirable.
      -The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

      Skills:
      Required:
      -Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
      -An intermediate level of practice as a SysML Model User and Builder is desired.
      -The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

      Desired:
      -Knowledge of Jazz Team Server (JTS) enterprise management is useful.
      -Understanding of how these applications are deployed and used in the aerospace industry is preferred.
      -Rocket engine or propulsion system domain knowledge is desirable.

      Education:
      -BS or MS in Engineering, Computer Science or related field is required.
      -MS in Systems Engineering is desirable.
       
      Job Number: 7755
      Job Location: Canoga Park, CA
      Rate: DOE
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 mos
      Input Date: 11/14/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Model Based Systems Engineering (MBSE) Technical Specialist URGENT CA

      Description:
      160120/7326500
      Canoga Park, CA
      70/hr max
      6 months

      Model Based Systems Engineering (MBSE) Technical Specialist

      Remaining Positions: 1

      Duties: ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
      -Knowledge of Jazz Team Server (JTS) enterprise management is useful.
      -An intermediate level of practice as a SysML Model User and Builder is desired.
      -Understanding of how these applications are deployed and used in the aerospace industry is preferred.
      -Rocket engine or propulsion system domain knowledge is desirable.
      -The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.
      Skills: Required:
      -Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
      -An intermediate level of practice as a SysML Model User and Builder is desired.
      -The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

      Desired:
      -Knowledge of Jazz Team Server (JTS) enterprise management is useful.
      -Understanding of how these applications are deployed and used in the aerospace industry is preferred.
      -Rocket engine or propulsion system domain knowledge is desirable.
      Education: -BS or MS in Engineering, Computer Science or related field is required.

      -MS in Systems Engineering is desirable.



      Skills: Required
      • MBSE
      • IBM RATIONAL SOFTWARE
      • DOORS SOFTWARE

      State/Province: California
      City/Town: Canoga Park

      Start Date: 09/04/2017 Hours Per Week: 40.00
      Est. End Date: 03/04/2018 Hours Per Day: 8.00
      Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
       
      Job Number: MB-7326500
      Job Location: Canoga Park, CA
      Rate: 70/hr max
      Duration: 6 month contract
      Input Date: 11/29/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      NX Mechanical Design Engineer IV (Propulsion)

      Description:
      Location: Jupiter, FL
      Rate: $50.00 - $60.00/HR
      Duration: 1 year contract
      Shift: 1st Shift

      ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      Duties:
      - Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
      - This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
      - Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
      - Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
      - Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
      - Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
      - Perform propulsion system to airframe and test article to test facility integration.
      - Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
      - Performs design calculations to validate design requirements.
      - Provides data in support of contract data requirements list (CDRL) submittals.
      - Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
      - Participates as a member of a project team.
      - Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
      - Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
      - Work is reviewed upon completion for adequacy in meeting objectives.
      - Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

      Skills:
      ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
      - Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
      - Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
      - Prior propulsion to airframe and test facility integration experience desired.
      - Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
      - Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
      - Position requires experience using CAD database management tools (WindChill preferred).
      - Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
      - Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
      - Knowledge of manufacturing techniques and inspection requirements is a plus.

      Education:
      ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
      - Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
       
      Job Number: 7961
      Job Location: Jupiter, FL
      Rate: $50.00 - $60.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 1 yr
      Input Date: 01/17/2018
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Non-Metallics Materials Engineer III CA

      Description:
      Job Title: Non-Metallics Materials Engineer III
      45/hr max

      Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      -Materials Engineer providing non-metallic material-related support for the design, development, and production of liquid rocket engine systems.
      -Knowledge of plastics, composites, ablatives, ceramics, and cleaning and other chemical processes preferred.
      -Select materials for product application, define processes, review engineering drawings for materials and processes concerns, generate reports to document technical conclusions/findings, and present data during various design reviews.
      -While general materials knowledge is required, direct experience in materials and processes engineering associated with liquid rocket engine design and production is preferred
      Skills: -Strong written and oral communication skills.
      -Fluency in MS Office applications including MS Word, Excel, and PPT.
      Keywords:
      Education: -Bachelor degree in Materials, Chemical, or Metallurgical Engineering discipline, or in Chemistry, is preferred, and minimum of five years of directly related technical experience in engineering disciplines or an equivalent combination of education and experience.
      -Advanced degree typically preferred.

      Skills and Experience:
      Required Skills:
      MATERIALS ENGINEERING
      AEROSPACE

      # of Positions: 1

      Location:
      Canoga Park, CA


      Schedule:
      Start Date: 11/13/2017
      Estimated End Date: 11/13/2018
      Hours Per Week: 40.00
      Hours Per Day: 8.00
       
      Job Number: MB-7359765
      Job Location: Canoga Park, CA
      Rate: 45/hr max
      Duration: 12 month contract
      Input Date: 01/12/2018
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Power Plant Engineer

      Description:
      Location: Savannah, GA
      Rate: $58.00 - $63.00/HR
      Duration: Long Term contract
      Shift: 1st Shift


      Unique Skills:
      The successful Power Plant Engineer (TSI) candidate should have aerospace experience and specific experience working with engine and engine subsystem installations.
      Required experience also to include knowledge of:
      - Airframe/Engine/Nacelle integration (Fire Protection)
      - Certification plans
      - Capability in managing engine suppliers and resolving technical issues
      - Strong communication and organizational skills.

      Education and Experience Requirements:
      Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

      Position Purpose:
      Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

      Principal Duties and Responsibilities:
      Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

      Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

      Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
       
      Job Number: 7931
      Job Location: Savannah, GA
      Rate: $58.00 - $63.00/HR
      Per Diem: Possible
      Overtime: Possible
      Duration: LT
      Input Date: 11/27/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Powerplant Engineer

      Description:
      • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

      Unique Skills:
      • The successful Powerplant Engineer candidate should have aerospace experience and specific experience working with engine and engine subsystem installations
      • Required experience also to include knowledge of:
      o Airframe/Engine/Nacelle integration (Fire Protection)
      o Certification plans
      o Capability in managing engine suppliers and resolving technical issues
      o Strong communication and organizational skills.

      Education and Experience Requirements:
      • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

      Essential Functions:
      • Contributes to planning, developing and coordinating of important engineering projects
      • Provides specialized technical assistance to team members
      • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problem
      • Determines and develops own approach to solutions within schedule and cost objectives
      • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
      • Acts as liaison with representatives outside of the assigned group/area
      • Actively works to improve daily processes and ensures all work meets customer requirements
      • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
       
      Job Number: 24-207
      Job Location: Savannah, GA
      Rate: $58 - $63
      Per Diem: Yes
      Overtime: Yes
      Duration: 1 Year plus
      Start Date: ASAP
      Input Date: 12/08/2017
      Firm Name: PRECISION PERSONNEL INC
      Attention: Matt
      Address: 600 CLEVELAND ST STE 700
      City, State: CLEARWATER, FL 33755
      Phone: 727/449-0600
      800 Phone: 877/600-2333
      Fax Phone: 727/449-0627
      Website: www.precisionpersonnel.com

      Powerplant Specialists

      Description:
      Aerospace flight and test/certification engineering specialists

      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Washington
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Erika
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x106
      Email: erika.legrand@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Procurement Engineer - Level 3

      Description:
      Procurement Engineer - Level 3

      Location: Tampa, FL
      Pay Rate: DOE ($25/hr - $45/hr)
      Duration: 6 month contract
      Shift: First, 5/40
      Travel: Yes; Lackland AFB San Antonio, TX
      ***MUST have an ACTIVE SECRET CLEARANCE***

      Description
      -Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
      -Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
      -Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
      -Facilitate technical trade-offs and standardization that may lead to more economical procurement.
      -Recommends design changes or process improvement to mitigate production issues.
      -Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
      -Provides technical solutions to a wide range of difficult problems.
      -Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
      -Works under general direction only and independently determines and develops approach to solutions.
      -Work is reviewed upon completion for adequacy in meeting objectives.
      -Reports directly to the Lead Procurement Engineer on the C-5 program.
      -Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
      -Experience with requirements management and flowdown to supplier.
      -Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
      -Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

      Skill/Experience/Education (MANDATORY):

      -Quality Assurance (4-5+ years experience)
      -Supplier Quality Assurance (4-5+ years experience)
      -Hardware Engineering (4-5+ years experience)
      -Test Verification/Validation (4-5+ years experience)
      -Configuration Management (4-5+ years experience)
      -ISO 9001: 2008 training (required)
      -AS9100C training (required)
      -Lockheed Martin Procure 2 Pay (P2P) training (required)
      -Auditor training (required)
      -Engineering or Technical 4-year Degree
      -Process Improvement
      -Purchase Orders
      -Physical and Software Configuration Audits
      -Source Inspections
      -QMS
      -Risk Assessment
      -ASQ
      -Corrective Action and Prevention
      -Reliability
      -Logistics
      -Excel


      Desired:
      -Subcontracts Management (0-3+ years experience)
      -Systems Engineering [aircraft avionics systems] (0-3+ years experience)
      -Green Belt/Black Belt Certification
       
      Job Number: 7345
      Job Location: Tampa, FL
      Rate: 25-45
      Per Diem: Split Possible
      Overtime: Yes
      Duration: 6 mos
      Start Date: ASAP
      Input Date: 11/14/2017
      Firm Name: INCONEN CORPORATION
      Attention: Rex Calkins
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      Product Repair/Mod Tech C (3) - ID - C

      Description:
      Chipton-Ross is seeking 3 Product Repair/Mod Techs located in Mountain Home AFB, ID

      RESPONSIBILITIES:
      Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

      EDUCATION:
      Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

      WORK HOURS:
      Full-Time/First Shift
      6:30 AM - 3 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      Travel Required-Nothing specific identified yet.

      International Travel Required
       
      Job Number: 165386
      Job Location: Mountain Home AFB, ID
      Rate: $DOE
      Duration: 4 MONTHS
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Christian Martinez-Salceda
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: cmartinez@chiptonross.com
      Website: www.chiptonross.com

      Product Repair/Mod Tech C - (3) - CA - C

      Description:
      Chipton-Ross is seeking 3 Product Repair/Mod Technicians C located in China Lake, CA

      RESPONSIBILITIES:
      Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.
      ***This support will be for the AV-8B ACFT in China Lake
      *** Provide on-site support to assist Environmental Test Engineering to perform the Ground Vibration Test (GVT) testing on the AV-8B Aircraft

      EDUCATION:
      Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience. School trained on the AV-8B ACFT is required.

      WORK HOURS:
      Full-Time/First Shift
      7 AM - 3:30 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      Travel to site for Short-Term Contract support

       
      Job Number: 165559
      Job Location: China Lake, CA
      Rate: $DOE
      Duration: 3 MONTHS
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Juan Saldarriaga
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jsaldarriaga@chiptonross.com
      Website: www.chiptonross.com

      Product Repair/Mod Tech C - (6) - FL - C

      Description:
      Chipton-Ross is seeking 6 Product Repair/Mod Technicians C located in Eglin AFB, FL

      RESPONSIBILITIES:
      ***Assignment start date has the possibility of being pushed to Jan/Feb timeframe***

      Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of an aerospace vehicle. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring. Able to perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring. Ability and understanding of routing instructions and handling of harnesses. Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes

      EDUCATION:
      Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

      WORK HOURS:
      Full-Time/First Shift
      6 AM - 2 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 165691
      Job Location: Eglin AFB, FL
      Rate: $DOE
      Duration: 12 MONTHS
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Emmanuel Morgan
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: emorgan@chiptonross.com
      Website: www.chiptonross.com

      Product Repair/Mod Tech C - ID - C

      Description:
      Chipton-Ross is seeking a Product Repair/Mod Tech located in Mountain Home AFB, ID.

      RESPONSIBILITIES:
      Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

      EDUCATION:
      Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

      FULL TIME/FIRST SHIFT
      WORK HOURS: 6:30 AM - 3:30 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

       
      Job Number: 165779
      Job Location: Mountain Home AFB, ID
      Rate: $DOE
      Duration: 12 Months
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Christian Martinez-Salceda
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: cmartinez@chiptonross.com
      Website: www.chiptonross.com

      Product Repair/Mod Tech C - NC - O/M

      Description:
      Chipton-Ross is seeking a Product Repair/Mod Technician C located in Seymour Johnson AFB, NC

      RESPONSIBILITIES:
      Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of a aerospace vehicle. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts. Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas. Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure. Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

      EDUCATION:
      Accredited High School Diploma/GED and typically 4 or more years' related experience or an equivalent combination of education and experience.

      WORK HOURS:
      Full-Time/First Shift
      6 AM - 2:30 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information

       
      Job Number: 165642
      Job Location: Seymour Johnson AFB, NC
      Rate: $DOE
      Duration: 12 MONTHS
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Nate Karlin
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: nkarlin@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Program Scheduler

      Description:
      Duties: Schedule various programs and production activities into one cohesive integrated master schedule. Use Oracle MPS/MRP to drive time-phased material / resource requirements and inter-site demand. Provide management with a clear critical path to deliveries and report bottlenecks and constraints.
      Skills: Required:
      MS Project
      APICS certification preferred
      ERP/MRP experience
      Production Scheduling or Capacity Planning experience

      Desired: Aerospace environment (scheduling or planning)
      Keywords:
      Education: Bachelors Degree
       
      Job Number: 7330310
      Job Location: Stennis Space Center, MS
      Rate: 30.00HR
      Duration: 6 months
      Start Date: ASAP
      Input Date: 01/02/2018
      Firm Name: MIDCOM CORPORATION
      Attention: Maurice Bradford
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Program Scheduler

      Description:
      Program Scheduler
      Stennis Space Center, MS
      Rate: $28-$30

      Duties: Schedule various programs and production activities into one cohesive integrated master schedule. Use Oracle MPS/MRP to drive time-phased material / resource requirements and inter-site demand. Provide management with a clear critical path to deliveries and report bottlenecks and constraints.
      Skills: Required:
      MS Project
      APICS certification preferred
      ERP/MRP experience
      Production Scheduling or Capacity Planning experience

      Desired: Aerospace environment (scheduling or planning)

      Education: Bachelors Degree
       
      Job Number: 8214
      Job Location: Stennis Space Center, MS
      Rate: $28-$30
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 mos
      Start Date: ASAP
      Input Date: 01/17/2018
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Project Engineer

      Description:
      Project Engineer
      12+ months contract
      Englewood, CO

      Job Summary

      Responsible for all Engineering aspects of the implementation of assigned projects. Coordinates engineering projects in terms of budget, schedule, performance and certification requirements. A leader in the organization with important influence on all technical. Aids in ensuring adherence to contracts, system or product specifications, FAA and Quality standards. Follows and improves processes and ensures team discipline and adherence. A key member of the technical staff, this position is highly influential in the development and direction of the organization. As such, the position should bring new ideas to work. Contribution on a personal or individual level as well as the leadership role is required.

      Supervisory Responsibilities

      This is a lead engineering role, and the candidate is responsible for serving as a team leader. This position has no direct supervisory responsibilities such as hiring, firing, and compensation plan development...

      Qualifications

      To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.

      Education & Experience
      •Bachelor’s degree (BS) in Mechanical, Aeronautical, Aerospace or related engineering field from four-year college or university; and seven to ten years’ related industry experience and/or training; or equivalent combination of education and experience.
      •Professional Engineer and/or Master’s degree (M.A.) in Mechanical, Aeronautical, Aerospace or related engineering field preferred
      •7-10 years project/program management experience
      •7-10 years previous experience in project management, design, analysis and certification of aircraft systems working with engineering staffs of military and civilian aircraft manufacturers
      •Analysis, design and development experience in aviation field preferred
      •Strong knowledge and understanding of design process and manufacturing processes

      Skills
      •Strong business acumen with the ability to understand business situations, strategies, theory, processes, management, budgeting and operations
      •Ability to multi-task efficiently, works in a fast paced environment on multiple projects, and has a strong attention for detail
      •Excellent written and verbal communication skills
      •Ability to be a team player with a professional attitude
      •Strong interpersonal skills and a high degree of collaboration at all levels

      Computer Skills
      •Experience with CAD software (Solid works /Auto Cad preferred)
      •Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook
       
      Job Number: 52702
      Job Location: Englewood, CO
      Rate: DOE
      Per Diem: possible
      Overtime: possible
      Duration: 12+ months
      Start Date: ASAP
      Input Date: 11/09/2017
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: Laura Leszek
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Fax Phone: 203/926-0082
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

      Description:
      160214/7333750
      Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

      Number of Positions: 2

      5 to 10 years of experience

      Duties: ** Candidates must be U.S. Citizens **

      ** Permanent residents are NOT eligible for this role **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      ** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

      ** Manager likes to see college GPA's on resumes **


      -Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

      Skills: -Experience with liquid rocket propulsion systems desired.
      -Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
      -Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
      -Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
      -May require the use of engineering test equipment, CAD, and/or various computer systems.
      -Ability to operate effectively in a team environment.
      -Demonstrated leadership skills are highly desireable.
      Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



      Skills: Required
      • PROJECT ENGINEER
      • COMPONENT ENGINEERING

      State/Province: California
      City/Town: Canoga Park



      Start Date: 09/11/2017 Hours Per Week: 40.00
      Est. End Date: 03/11/2018 Hours Per Day: 8.00
      Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
       
      Job Number: MB-7333750
      Job Location: Canoga Park, CA
      Rate: 45/hr max
      Duration: 6 month contract
      Input Date: 12/15/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Project Engineer/Component Product Engineer II-III (Valves & Acutators

      Description:
      Location: Canoga Park, CA
      Rate: $35.00 - $45.00/HR
      Duration: 6 month contract


      ** Candidates must be U.S. Citizens **
      ** Permanent residents are NOT eligible for this role **
      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      Duties:
      ** This is NOT a Designer role**
      -Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


      Skills:
      -Experience with liquid rocket propulsion systems desired.
      -Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
      -Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
      -Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
      -May require the use of engineering test equipment, CAD, and/or various computer systems.
      -Ability to operate effectively in a team environment.
      -Demonstrated leadership skills are highly desireable.

      Education:
      BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
       
      Job Number: 7823
      Job Location: Canoga Park, CA
      Rate: $35.00 - $45.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 mos
      Input Date: 12/18/2017
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Project Manager

      Description:
      Project Manager
      Windsor Locks, CT
      12+ months contract

      *Multiple openings!*

      The ideal candidates will manage high complexity engineering projects and will perform project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

      Project Engineers or Managers with a background in Aerospace, Mechanical, Electrical or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense and experience leading IPD Teams and SAP required. Ideal candidate must also have skills and working knowledge of Project Management Body of Knowledge.

      A Bachelor's Degree is required.

      This position includes the following:
      • Planning, execution, coordination and communication of team activities and commitments
      • Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
      • Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
      • Ensure targeted goals (schedule and cost) is communicated to the team members
      • Identify, assess and manage the team’s risks
      • Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
      • Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
      • Meet design and design-to-cost requirements.
      • Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.

      The Project Managers/Engineers will:
      Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements.
      Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
      Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
      Assist in creating program directives that define Earned Value Plans.
      Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager
      Work with operations to fabricate, assemble and test development and qualification and flight hardware.
      Coordinate, track and support development and flight hardware build and test.
      Initiate in scope engineering changes working with all functions to implement approved changes.
      Document activities and programs worked with time spent on various activities.
       
      Job Number: 52507
      Job Location: Windsor Locks, CT
      Rate: $48
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 months+
      Start Date: 10/23/17
      Input Date: 11/09/2017
      Firm Name: BUTLER AEROSPACE & DEFENSE
      Attention: Laura Leszek
      Address: SHELTON POINTE STE 204
      2 TRAP FALLS ROAD

      City, State: SHELTON, CT 06484
      Phone: 203/926-2705
      Fax Phone: 203/926-0082
      Website: www.butler.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Project Manager Engineer

      Description:
      Project Manager Engineer

      Denver, CO
      1 Year Contract
      Pay Rate: DOE

      Job Description
      This project manager engineering function will oversee and manage the operational aspects of ongoing projects and serves as a liaison between the project team and management for the Vulcan Payload Accommodation (PLA) and Upper Stage Ordnance systems. Review status of project development, budgets, manages schedule, and prepares status reports. Develops mechanisms for monitoring project progress. Prepares standard deliverables to both internal and external customers and hosts standards meetings using WebEx.

      Basic Requirements
      -Proficient in Microsoft Office (Word, Excel, PowerPoint and Project)
      -Basic knowledge of Siemens NX
      -Basic knowledge of Siemens Teamcenter
      -Requires a bachelor's degree in engineering from an accredited university and 2+ years’ experience in mechanical engineering field
      -Goal oriented with an acute attention to detail
      -A team player with the ability to adapt within a dynamic working environment

      Preferred Qualifications
      -Proficient in Siemens Teamcenter --Experience in 3D PDF design process
      -Knowledge of Aerospace design
       
      Job Number: 8168
      Job Location: Denver, CO
      Rate: DOE
      Per Diem: Possible Split
      Overtime: Exempt
      Duration: 1 Year
      Start Date: ASAP
      Input Date: 11/14/2017
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Quality Assurance Specialist Engineer

      Description:
      Quality Assurance Specialist Engineer

      Canoga Park, CA
      1 Year Contract
      $50.00-54.00/Hr

      1st Shift

      Duties:

      ***Be available for 50% to 75% travel to White Sands Test Facility in New Mexico to support rocket engine testing for a week (or more) at a time***

      ** Candidates must be U.S. Citizens **



      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      ** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **


      Candidate needs to be familiar with the following processes:

      -Nonconformance generation and closure process

      -Cause and corrective action process

      -A general understanding of machining, blueprints, measurement tools and build records, GD&T

      -A general understanding of what quality engineering does

      This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

      Essential Job Functions

      15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


      20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.


      15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


      20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


      15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.


      10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.


      5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

      Skills:

      Effective verbal and written communication skills.
      Strong interpersonal skills and ability to work within a close-knit team environment.
      Valid driver’s license.

      Education:
      Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
       
      Job Number: 7964
      Job Location: Canoga Park, CA
      Rate: $50.00-54.00/Hr
      Per Diem: Possible Split
      Overtime: Possible
      Duration: 3 Mos
      Start Date: ASAP
      Input Date: 12/20/2017
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Quality Assurance Specialist Engineer

      Description:
      Quality Assurance Specialist Engineer

      Canoga Park, CA
      1 Year Contract
      $50.00-54.00/Hr

      1st Shift

      Duties:
      ** Candidates must be U.S. Citizens **

      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

      ** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

      This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.

      Essential Job Functions

      15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.

      20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.

      15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.

      20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.

      15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.

      10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.

      5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

      Skills:
      Effective verbal and written communication skills.
      Strong interpersonal skills and ability to work within a close-knit team environment.
      Valid driver’s license.

      Education:
      Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.
       
      Job Number: 7880
      Job Location: Canoga Park, CA
      Rate: 50.00-54.00/Hr
      Per Diem: Possible Split
      Overtime: Possible
      Duration: 1 Year
      Start Date: ASAP
      Input Date: 12/12/2017
      Firm Name: INCONEN CORPORATION
      Attention: Brad
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Quality Assurance Specialist Engineer / NDT / 6 openings! CA

      Description:
      160315/7337172

      Job Title: Quality Assurance Specialist Engineer
      Rate 54/hr max

      Number of Positions: 6

      Remaining Positions: 6

      Duties:
      ** Candidates must be U.S. Citizens **



      ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


      ** Dual Citizens or candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **





      This individual will provide Quality Engineering support to the assigned product team spanning the life cycle of the program; including design, development, production, test, and supplier support. An understanding of engineering drawings, specifications, and typical aerospace product assurance processes (dimensional inspection, NDT, source/receiving inspection, etc) is required.



      Essential Job Functions

      15% - Utilizes engineering background and expertise to communicate quality requirements to product team members, in-house inspection personnel, and suppliers. Communicates quality issues to program and process management.


      20% - Reviews engineering drawings for inspectability. Works with inspection process experts to develop special inspection techniques where necessary. Assures that fabrication and inspection requirements defined in engineering drawings/specifications are appropriate for the design and comply with customer and company quality requirements.



      15% - Participates in design reviews with customers. Presents the product inspection plan describing how hardware acceptance processes will assure compliance with design, customer, and company requirements.


      20% - Provides a clear and concise flow down of product definition and quality requirements to suppliers. Works closely with Supply Management and Supplier Quality to coordinate/resolve supplier issues.


      15% Reviews product nonconformances. Assure adequate nonconformance description and appropriate disposition. Handles and communicates deviations/nonconformances at different levels within the organization. Interfaces with the Material Review Board (MRB) to describe impact of nonconformance (schedule, cost, performance, etc.) and explain technical justification for the hardware disposition.



      10% - Drives corrective and preventative action activity both in-house and at the supplier, and provides corrective action board support to manage timely and effective problem closure and recurrence control.



      5% - Prepares comprehensive analyses, procedures, reports and presentations for both internal and external customers.

      Skills:
      Effective verbal and written communication skills.
      Strong interpersonal skills and ability to work within a close-knit team environment.
      Valid driver’s license.
      Education:
      Bachelor’s degree in appropriate discipline and 9 years of directly related experience, or an equivalent combination of education and experience.


      Skills:
      Required

      QUALITY ENGINEER AEROSPACE

      State/Province: California
      City/Town: Canoga Park

      Start Date: 09/25/2017 Hours Per Week: 40.00
      Est. End Date: 09/25/2018 Hours Per Day: 8.00
      Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
       
      Job Number: MB-7337172
      Job Location: Canoga Park, CA
      Rate: 54/hr max
      Duration: 12 month contract
      Input Date: 11/27/2017
      Firm Name: MIDCOM CORPORATION
      Attention: Jeana Edrozo
      Address: 1275 N MANASSERO ST
      City, State: ANAHEIM, CA 92807
      Phone: 714/630-1999
      800 Phone: 800/737-1632
      Fax Phone: 714/459-7055
      Website: www.midcom.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Quality Inspector-Aerospace Flight Test

      Description:
      The Quality inspector inspects the Aircraft and signs a release for flight.

      Job Duties and Responsibilities:
      • Carry out physical inspections on Flight Test Aircraft to identify damage or defects and to assess airworthiness and conformance to standards.
      o Sign the release for flight form on aircrafts that pass Quality Inspection.
      o Analyze information and evaluate results to choose the best solution and solve problems.
      • Observe and certify conformity with system tests.
      • Carry out daily audits related to shop floor practices or specific Quality System elements.
      • Prepare and audit Aircraft documentation such as Technical logs.
      • Administer non-conformance reports and snag reports.
      • Conduct Authority audits with QA organization as needed.
      • Perform Nondestructive testing (NDT) as needed.
      • Complete special projects and miscellaneous tasks as assigned by manager.

      Level Requirements:
      Education:
      Degree, specification
      • College degree or equivalent work experience
      • A&P license
      Preferred qualifications
      • NDT certification

      Experience:
      • 10 + years of experience in AC release as a Quality Inspector in Experimental Flight Testing or maintenance or pre-flight.
      • Experimental experience preferred from other field of experience.
       
      Job Location: Moses Lake, WA
      Rate: DOE
      Per Diem: Split- Possible
      Overtime: Yes
      Start Date: ASAP
      Input Date: 01/23/2018
      Firm Name: VELOCITY CONSULTING SOLUTIONS
      Attention: Susan McGlinsey
      Address: 20306 15TH AVE NE STE A
      City, State: SHORELINE, WA 98155
      Phone: 206/812-1061
      Website: www.velocity-cs.com

      Recruiter - Aerospace & Defense - TX

      Description:
      Chipton-Ross is seeking a Recruiter - Aerospace & Defense for an opening in Greenville, TX.

      RESPONSIBILITIES:
      oManages Talent acquisition process with enthusiasm and accuracy from requisition initiation through offer acceptance.
      oWorks with Hiring Managers with each phase and communicates updates.
      oProcesses new requisitions and approvals through Taleo Applicant Tracking System, including obtaining all required approvals.
      oRecruits for technical and non-technical, temporary and direct-hire employees.
      oNetworks through industry contacts, association memberships, trade groups and employees.
      oPosts openings internally and externally on company website and other position-appropriate venues.
      oReviews applicants to evaluate if they meet the position requirements, forwards qualified candidates to hiring manager and may conduct prescreening interviews.
      oSchedules and coordinates interviews with all participating interviewers.
      oCollects candidate feedback and maintains records.
      oAssists in performing reference checks and initiating background checks and drug screens for potential employees.
      oRecruits for, tracks and follows up on all temporary and contract employees.
      oNegotiates offers, relocations, start dates, etc., within approved boundaries.
      oCoordinates candidate travel, if required.
      oCompiles data and provides regular reports on status of open positions and recruitment metrics.
      oAssist with new hire orientation as needed.
      oPerform other duties, as assigned.

      REQUIRED EXPERIENCE:
      oExperience in a Department of Defense (Contractor) environment required. (DOD, FAR & DFAR)
      oExperience in an Aviation Maintenance environment preferred.
      oCertificate in Human Resources Management desirable.

      EDUCATION:
      oBachelor's degree Human Resources, Business Administration or related field with 3-5 years related experience and/or training; or equivalent combination of education and experience.

      WORK HOURS:
      Day Shift, Full-Time

       
      Job Number: 164641
      Job Location: Greenville, TX
      Rate: $30 to $35.00 DOE
      Duration: 6 Months
      Input Date: 02/25/2018
      Firm Name: CHIPTON ROSS
      Attention: Rochelle Anderson
      Address: 343 MAIN ST
      City, State: EL SEGUNDO, CA 90245
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: randerson@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Reliability, Maintainability, and Safety (RMS) Engineer

      Description:
      Bachelor Degree in computer, electrical, mechanical, or aerospace engineering plus 5+ yrs. in RMS
      ·Prior use of PDM system (i.e. SmarTeam, MatrixOne, Team Center)
      .Proficient at using computing tools and programs including MS Office, Windows
      ·Must be able to verify U.S. Person Status as defined by International Traffic in Arms Regulations (ITAR)
      Familiarity with FAR / CS 25 (Transport Airplane) certification requirements
      Good working knowledge of commonly used RMS software:
      · RELEX suite (all modulus)
      · ISOGRAPH Fault Tree Plus
      · CAFTA
      · Reliasoft MPC3 (MSG3 analysis)
      · Various reliability databases
      · Catia V5 - fundamentals
      THIS IS A DIRECT HIRE POSITION
       
      Job Number: 1557052
      Job Location: Fort Worth, TX
      Rate: Direct Hire
      Input Date: 11/10/2017
      Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
      Attention: Anne Cameron
      Address: 2501 E PIEDMONT RD STE 103
      City, State: MARIETTA, GA 30062-7753
      Phone: 770/575-5855
      Fax Phone: 770/575-5856
      Website: www.hi-tecsolutions.com

      Safety Engineers -- Aerospace

      Description:
      Job location: Overseas

      Contact:
      Morgan at (585) 441-9800 x104 or
      Nicholas at (585) 441-9800 x126


      Paid Travel
      Great Hourly Rates
      Direct Deposit
      Per Diem
      Tax Benefits
      Healthcare Options
       
      Job Location: Overseas/International
      Input Date: 03/27/2017
      Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
      Attention: Morgan or Nicholas
      Address: 150 RESEARCH BLVD
      City, State: ROCHESTER, NY 14623
      Phone: 585/441-9800 x104 or x126
      Email: morgan.ricklefs@noramtecna.com; nicholas.salsedo@noramtecna.com
      Website: www.noramtec.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Senior Aerospace Software Engineer - California

      Description:
      Leading aircraft company are seeking an experienced Aerospace Software Engineer to work on the early stage development of an ejectable flight data recorder (EFDR) project, which has been officially established with FAA and EASA. Responsibilities include:

      * Define, analyze and review software requirements to meet defined and anticipated customer needs and system quality and performance standards.
      * Design software architecture and interfaces and implement functionality, typically using a model-based approach.
      * Write test plans and test cases, conduct unit, integration, and system level testing.

      You will be an experienced Software Engineer with considerable knowledge of airborne software development within the aerospace industry. This will include:

      * Model based design and development using Simulink/Stateflow tool chain etc.
      * Software development experience with flight control or avionics systems.
      * Recent experience (within past year) of personally developing production software
      * Familiar with ARP4754/ARP4761 process and DO-178, DO-254 standards.
      * Familiar with DOORS Requirements Management software.

      This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
       
      Job Number: JO0000000010
      Job Location: Newport Beach, CA
      Rate: to $85/hour
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 months
      Start Date: ASAP
      Input Date: 11/06/2017
      Firm Name: STRONGFIELD TECHNOLOGIES USA INC
      Attention: Adrian Medhurst
      Address: 5000 BIRCH ST STE 3000
      City, State: NEWPORT BEACH, CA 92660
      Website: www.strongfield.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Senior Engineer (Flight Data Recorders) - California

      Description:
      Leading aircraft company are seeking a Senior Engineer to join in the very early stage of an ejectable flight data recorder project, which has been officially established with FAA and EASA. This role will provide expertise in the area of Flight Data Recorders (FDR), Cockpit Voice Recorders (CVR) and Emergency Locator Transmitters (ELT) regarding system specification and integration etc. This is a critical role for the project and will run through the whole development process. Key Responsibilities include:

      * Acting as technical expert for flight data recording covering data recording requirements, conformity, decomposition and integration.
      * Authoring and reviewing flight data recording related documents.
      * Proving expertise to product development team design for design and certification constraints.

      You will be an Senior Engineer within the aerospace industry and have considerable experience and expertise in flight data recorders and/or cockpit voice recorder systems, with knowledge of Emergency Transmitter Locators a plus.

      This will include a solid understanding of industry guidance and regulations associated with FDR/CVR and data links and knowledge of airworthiness regulations like FAR 91.609 etc.

      This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
       
      Job Number: JO0000000011
      Job Location: Newport Beach, CA
      Rate: to $90/hour
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 months
      Start Date: ASAP
      Input Date: 11/06/2017
      Firm Name: STRONGFIELD TECHNOLOGIES USA INC
      Attention: Adrian Medhurst
      Address: 5000 BIRCH ST STE 3000
      City, State: NEWPORT BEACH, CA 92660
      Website: www.strongfield.com